commit 79bfa20ac724bfa24f0708ab8282b7799c5cc7eb Author: Lorentzo Donné Date: Thu Jul 24 22:34:17 2025 +0200 Initial commit diff --git a/.cproject b/.cproject new file mode 100644 index 0000000..5a95396 --- /dev/null +++ b/.cproject @@ -0,0 +1,180 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/.mxproject b/.mxproject new file mode 100644 index 0000000..9f10e21 --- /dev/null +++ b/.mxproject @@ -0,0 +1,25 @@ +[PreviousLibFiles] +LibFiles=Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_i2c.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_def.h;Drivers\STM32L4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_bus.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_rcc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_crs.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_system.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_utils.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ramfunc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_gpio.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_dma.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_dmamux.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_pwr.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_cortex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_cortex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_exti.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_exti.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_usart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_lpuart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart_ex.h;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_i2c.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_i2c_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_def.h;Drivers\STM32L4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_rcc_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_bus.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_rcc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_crs.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_system.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_utils.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_flash_ramfunc.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_gpio_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_gpio.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_dma_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_dma.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_dmamux.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_pwr_ex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_pwr.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_cortex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_cortex.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_exti.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_exti.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_usart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_ll_lpuart.h;Drivers\STM32L4xx_HAL_Driver\Inc\stm32l4xx_hal_uart_ex.h;Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l452xx.h;Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l4xx.h;Drivers\CMSIS\Device\ST\STM32L4xx\Include\system_stm32l4xx.h;Drivers\CMSIS\Device\ST\STM32L4xx\Include\system_stm32l4xx.h;Drivers\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; + +[PreviousUsedCubeIDEFiles] +SourceFiles=Core\Src\main.c;Core\Src\stm32l4xx_it.c;Core\Src\stm32l4xx_hal_msp.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c;Drivers\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c;Core\Src\system_stm32l4xx.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_flash_ramfunc.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c;Drivers\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c;Drivers\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c;Core\Src\system_stm32l4xx.c;;; +HeaderPath=Drivers\STM32L4xx_HAL_Driver\Inc;Drivers\STM32L4xx_HAL_Driver\Inc\Legacy;Drivers\CMSIS\Device\ST\STM32L4xx\Include;Drivers\CMSIS\Include;Core\Inc; +CDefines=USE_HAL_DRIVER;STM32L452xx;USE_HAL_DRIVER;USE_HAL_DRIVER; + +[PreviousGenFiles] +AdvancedFolderStructure=true +HeaderFileListSize=3 +HeaderFiles#0=..\Core\Inc\stm32l4xx_it.h +HeaderFiles#1=..\Core\Inc\stm32l4xx_hal_conf.h +HeaderFiles#2=..\Core\Inc\main.h +HeaderFolderListSize=1 +HeaderPath#0=..\Core\Inc +HeaderFiles=; +SourceFileListSize=3 +SourceFiles#0=..\Core\Src\stm32l4xx_it.c +SourceFiles#1=..\Core\Src\stm32l4xx_hal_msp.c +SourceFiles#2=..\Core\Src\main.c +SourceFolderListSize=1 +SourcePath#0=..\Core\Src +SourceFiles=; + diff --git a/.project b/.project new file mode 100644 index 0000000..7b43ead --- /dev/null +++ b/.project @@ -0,0 +1,32 @@ + + + moto-perf + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + com.st.stm32cube.ide.mcu.MCUProjectNature + org.eclipse.cdt.core.cnature + com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature + com.st.stm32cube.ide.mcu.MCUCubeProjectNature + com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature + com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature + com.st.stm32cube.ide.mcu.MCURootProjectNature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + diff --git a/.settings/language.settings.xml b/.settings/language.settings.xml new file mode 100644 index 0000000..2c41265 --- /dev/null +++ b/.settings/language.settings.xml @@ -0,0 +1,25 @@ + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/.settings/stm32cubeide.project.prefs b/.settings/stm32cubeide.project.prefs new file mode 100644 index 0000000..b4a2e8c --- /dev/null +++ b/.settings/stm32cubeide.project.prefs @@ -0,0 +1,4 @@ +2F62501ED4689FB349E356AB974DBE57=99AE16276D6E011C9E8FF08295691A58 +8DF89ED150041C4CBC7CB9A9CAA90856=99AE16276D6E011C9E8FF08295691A58 +DC22A860405A8BF2F2C095E5B6529F12=EBA8649CFED034199289C3453F8ABAD1 +eclipse.preferences.version=1 diff --git a/Core/Inc/FusionAhrs.h b/Core/Inc/FusionAhrs.h new file mode 100644 index 0000000..fca2476 --- /dev/null +++ b/Core/Inc/FusionAhrs.h @@ -0,0 +1,111 @@ +/** + * @file FusionAhrs.h + * @author Seb Madgwick + * @brief AHRS algorithm to combine gyroscope, accelerometer, and magnetometer + * measurements into a single measurement of orientation relative to the Earth. + */ + +#ifndef FUSION_AHRS_H +#define FUSION_AHRS_H + +//------------------------------------------------------------------------------ +// Includes + +#include "FusionConvention.h" +#include "FusionMath.h" +#include + +//------------------------------------------------------------------------------ +// Definitions + +/** + * @brief AHRS algorithm settings. + */ +typedef struct { + FusionConvention convention; + float gain; + float gyroscopeRange; + float accelerationRejection; + float magneticRejection; + unsigned int recoveryTriggerPeriod; +} FusionAhrsSettings; + +/** + * @brief AHRS algorithm structure. Structure members are used internally and + * must not be accessed by the application. + */ +typedef struct { + FusionAhrsSettings settings; + FusionQuaternion quaternion; + FusionVector accelerometer; + bool initialising; + float rampedGain; + float rampedGainStep; + bool angularRateRecovery; + FusionVector halfAccelerometerFeedback; + FusionVector halfMagnetometerFeedback; + bool accelerometerIgnored; + int accelerationRecoveryTrigger; + int accelerationRecoveryTimeout; + bool magnetometerIgnored; + int magneticRecoveryTrigger; + int magneticRecoveryTimeout; +} FusionAhrs; + +/** + * @brief AHRS algorithm internal states. + */ +typedef struct { + float accelerationError; + bool accelerometerIgnored; + float accelerationRecoveryTrigger; + float magneticError; + bool magnetometerIgnored; + float magneticRecoveryTrigger; +} FusionAhrsInternalStates; + +/** + * @brief AHRS algorithm flags. + */ +typedef struct { + bool initialising; + bool angularRateRecovery; + bool accelerationRecovery; + bool magneticRecovery; +} FusionAhrsFlags; + +//------------------------------------------------------------------------------ +// Function declarations + +void FusionAhrsInitialise(FusionAhrs *const ahrs); + +void FusionAhrsReset(FusionAhrs *const ahrs); + +void FusionAhrsSetSettings(FusionAhrs *const ahrs, const FusionAhrsSettings *const settings); + +void FusionAhrsUpdate(FusionAhrs *const ahrs, const FusionVector gyroscope, const FusionVector accelerometer, const FusionVector magnetometer, const float deltaTime); + +void FusionAhrsUpdateNoMagnetometer(FusionAhrs *const ahrs, const FusionVector gyroscope, const FusionVector accelerometer, const float deltaTime); + +void FusionAhrsUpdateExternalHeading(FusionAhrs *const ahrs, const FusionVector gyroscope, const FusionVector accelerometer, const float heading, const float deltaTime); + +FusionQuaternion FusionAhrsGetQuaternion(const FusionAhrs *const ahrs); + +void FusionAhrsSetQuaternion(FusionAhrs *const ahrs, const FusionQuaternion quaternion); + +FusionVector FusionAhrsGetGravity(const FusionAhrs *const ahrs); + +FusionVector FusionAhrsGetLinearAcceleration(const FusionAhrs *const ahrs); + +FusionVector FusionAhrsGetEarthAcceleration(const FusionAhrs *const ahrs); + +FusionAhrsInternalStates FusionAhrsGetInternalStates(const FusionAhrs *const ahrs); + +FusionAhrsFlags FusionAhrsGetFlags(const FusionAhrs *const ahrs); + +void FusionAhrsSetHeading(FusionAhrs *const ahrs, const float heading); + +#endif + +//------------------------------------------------------------------------------ +// End of file diff --git a/Core/Inc/FusionConvention.h b/Core/Inc/FusionConvention.h new file mode 100644 index 0000000..0b0d43a --- /dev/null +++ b/Core/Inc/FusionConvention.h @@ -0,0 +1,25 @@ +/** + * @file FusionConvention.h + * @author Seb Madgwick + * @brief Earth axes convention. + */ + +#ifndef FUSION_CONVENTION_H +#define FUSION_CONVENTION_H + +//------------------------------------------------------------------------------ +// Definitions + +/** + * @brief Earth axes convention. + */ +typedef enum { + FusionConventionNwu, /* North-West-Up */ + FusionConventionEnu, /* East-North-Up */ + FusionConventionNed, /* North-East-Down */ +} FusionConvention; + +#endif + +//------------------------------------------------------------------------------ +// End of file diff --git a/Core/Inc/FusionMath.h b/Core/Inc/FusionMath.h new file mode 100644 index 0000000..5ee92b0 --- /dev/null +++ b/Core/Inc/FusionMath.h @@ -0,0 +1,481 @@ +/** + * @file FusionMath.h + * @author Seb Madgwick + * @brief Math library. + */ + +#ifndef FUSION_MATH_H +#define FUSION_MATH_H + +//------------------------------------------------------------------------------ +// Includes + +#include +#include +#include + +//------------------------------------------------------------------------------ +// Definitions + +/** + * @brief 3D vector. + */ +typedef union { + float array[3]; + + struct { + float x; + float y; + float z; + } axis; +} FusionVector; + +/** + * @brief Quaternion. + */ +typedef union { + float array[4]; + + struct { + float w; + float x; + float y; + float z; + } element; +} FusionQuaternion; + +/** + * @brief 3x3 matrix in row-major order. + * See http://en.wikipedia.org/wiki/Row-major_order + */ +typedef union { + float array[3][3]; + + struct { + float xx; + float xy; + float xz; + float yx; + float yy; + float yz; + float zx; + float zy; + float zz; + } element; +} FusionMatrix; + +/** + * @brief Euler angles. Roll, pitch, and yaw correspond to rotations around + * X, Y, and Z respectively. + */ +typedef union { + float array[3]; + + struct { + float roll; + float pitch; + float yaw; + } angle; +} FusionEuler; + +/** + * @brief Vector of zeros. + */ +#define FUSION_VECTOR_ZERO ((FusionVector){ .array = {0.0f, 0.0f, 0.0f} }) + +/** + * @brief Vector of ones. + */ +#define FUSION_VECTOR_ONES ((FusionVector){ .array = {1.0f, 1.0f, 1.0f} }) + +/** + * @brief Identity quaternion. + */ +#define FUSION_IDENTITY_QUATERNION ((FusionQuaternion){ .array = {1.0f, 0.0f, 0.0f, 0.0f} }) + +/** + * @brief Identity matrix. + */ +#define FUSION_IDENTITY_MATRIX ((FusionMatrix){ .array = {{1.0f, 0.0f, 0.0f}, {0.0f, 1.0f, 0.0f}, {0.0f, 0.0f, 1.0f}} }) + +/** + * @brief Euler angles of zero. + */ +#define FUSION_EULER_ZERO ((FusionEuler){ .array = {0.0f, 0.0f, 0.0f} }) + +/** + * @brief Pi. May not be defined in math.h. + */ +#ifndef M_PI +#define M_PI (3.14159265358979323846) +#endif + +/** + * @brief Include this definition or add as a preprocessor definition to use + * normal square root operations. + */ +//#define FUSION_USE_NORMAL_SQRT + +//------------------------------------------------------------------------------ +// Inline functions - Degrees and radians conversion + +/** + * @brief Converts degrees to radians. + * @param degrees Degrees. + * @return Radians. + */ +static inline float FusionDegreesToRadians(const float degrees) { + return degrees * ((float) M_PI / 180.0f); +} + +/** + * @brief Converts radians to degrees. + * @param radians Radians. + * @return Degrees. + */ +static inline float FusionRadiansToDegrees(const float radians) { + return radians * (180.0f / (float) M_PI); +} + +//------------------------------------------------------------------------------ +// Inline functions - Arc sine + +/** + * @brief Returns the arc sine of the value. + * @param value Value. + * @return Arc sine of the value. + */ +static inline float FusionAsin(const float value) { + if (value <= -1.0f) { + return (float) M_PI / -2.0f; + } + if (value >= 1.0f) { + return (float) M_PI / 2.0f; + } + return asinf(value); +} + +//------------------------------------------------------------------------------ +// Inline functions - Fast inverse square root + +#ifndef FUSION_USE_NORMAL_SQRT + +/** + * @brief Calculates the reciprocal of the square root. + * See https://pizer.wordpress.com/2008/10/12/fast-inverse-square-root/ + * @param x Operand. + * @return Reciprocal of the square root of x. + */ +static inline float FusionFastInverseSqrt(const float x) { + + typedef union { + float f; + int32_t i; + } Union32; + + Union32 union32 = {.f = x}; + union32.i = 0x5F1F1412 - (union32.i >> 1); + return union32.f * (1.69000231f - 0.714158168f * x * union32.f * union32.f); +} + +#endif + +//------------------------------------------------------------------------------ +// Inline functions - Vector operations + +/** + * @brief Returns true if the vector is zero. + * @param vector Vector. + * @return True if the vector is zero. + */ +static inline bool FusionVectorIsZero(const FusionVector vector) { + return (vector.axis.x == 0.0f) && (vector.axis.y == 0.0f) && (vector.axis.z == 0.0f); +} + +/** + * @brief Returns the sum of two vectors. + * @param vectorA Vector A. + * @param vectorB Vector B. + * @return Sum of two vectors. + */ +static inline FusionVector FusionVectorAdd(const FusionVector vectorA, const FusionVector vectorB) { + const FusionVector result = {.axis = { + .x = vectorA.axis.x + vectorB.axis.x, + .y = vectorA.axis.y + vectorB.axis.y, + .z = vectorA.axis.z + vectorB.axis.z, + }}; + return result; +} + +/** + * @brief Returns vector B subtracted from vector A. + * @param vectorA Vector A. + * @param vectorB Vector B. + * @return Vector B subtracted from vector A. + */ +static inline FusionVector FusionVectorSubtract(const FusionVector vectorA, const FusionVector vectorB) { + const FusionVector result = {.axis = { + .x = vectorA.axis.x - vectorB.axis.x, + .y = vectorA.axis.y - vectorB.axis.y, + .z = vectorA.axis.z - vectorB.axis.z, + }}; + return result; +} + +/** + * @brief Returns the sum of the elements. + * @param vector Vector. + * @return Sum of the elements. + */ +static inline float FusionVectorSum(const FusionVector vector) { + return vector.axis.x + vector.axis.y + vector.axis.z; +} + +/** + * @brief Returns the multiplication of a vector by a scalar. + * @param vector Vector. + * @param scalar Scalar. + * @return Multiplication of a vector by a scalar. + */ +static inline FusionVector FusionVectorMultiplyScalar(const FusionVector vector, const float scalar) { + const FusionVector result = {.axis = { + .x = vector.axis.x * scalar, + .y = vector.axis.y * scalar, + .z = vector.axis.z * scalar, + }}; + return result; +} + +/** + * @brief Calculates the Hadamard product (element-wise multiplication). + * @param vectorA Vector A. + * @param vectorB Vector B. + * @return Hadamard product. + */ +static inline FusionVector FusionVectorHadamardProduct(const FusionVector vectorA, const FusionVector vectorB) { + const FusionVector result = {.axis = { + .x = vectorA.axis.x * vectorB.axis.x, + .y = vectorA.axis.y * vectorB.axis.y, + .z = vectorA.axis.z * vectorB.axis.z, + }}; + return result; +} + +/** + * @brief Returns the cross product. + * @param vectorA Vector A. + * @param vectorB Vector B. + * @return Cross product. + */ +static inline FusionVector FusionVectorCrossProduct(const FusionVector vectorA, const FusionVector vectorB) { +#define A vectorA.axis +#define B vectorB.axis + const FusionVector result = {.axis = { + .x = A.y * B.z - A.z * B.y, + .y = A.z * B.x - A.x * B.z, + .z = A.x * B.y - A.y * B.x, + }}; + return result; +#undef A +#undef B +} + +/** + * @brief Returns the dot product. + * @param vectorA Vector A. + * @param vectorB Vector B. + * @return Dot product. + */ +static inline float FusionVectorDotProduct(const FusionVector vectorA, const FusionVector vectorB) { + return FusionVectorSum(FusionVectorHadamardProduct(vectorA, vectorB)); +} + +/** + * @brief Returns the vector magnitude squared. + * @param vector Vector. + * @return Vector magnitude squared. + */ +static inline float FusionVectorMagnitudeSquared(const FusionVector vector) { + return FusionVectorSum(FusionVectorHadamardProduct(vector, vector)); +} + +/** + * @brief Returns the vector magnitude. + * @param vector Vector. + * @return Vector magnitude. + */ +static inline float FusionVectorMagnitude(const FusionVector vector) { + return sqrtf(FusionVectorMagnitudeSquared(vector)); +} + +/** + * @brief Returns the normalised vector. + * @param vector Vector. + * @return Normalised vector. + */ +static inline FusionVector FusionVectorNormalise(const FusionVector vector) { +#ifdef FUSION_USE_NORMAL_SQRT + const float magnitudeReciprocal = 1.0f / sqrtf(FusionVectorMagnitudeSquared(vector)); +#else + const float magnitudeReciprocal = FusionFastInverseSqrt(FusionVectorMagnitudeSquared(vector)); +#endif + return FusionVectorMultiplyScalar(vector, magnitudeReciprocal); +} + +//------------------------------------------------------------------------------ +// Inline functions - Quaternion operations + +/** + * @brief Returns the sum of two quaternions. + * @param quaternionA Quaternion A. + * @param quaternionB Quaternion B. + * @return Sum of two quaternions. + */ +static inline FusionQuaternion FusionQuaternionAdd(const FusionQuaternion quaternionA, const FusionQuaternion quaternionB) { + const FusionQuaternion result = {.element = { + .w = quaternionA.element.w + quaternionB.element.w, + .x = quaternionA.element.x + quaternionB.element.x, + .y = quaternionA.element.y + quaternionB.element.y, + .z = quaternionA.element.z + quaternionB.element.z, + }}; + return result; +} + +/** + * @brief Returns the multiplication of two quaternions. + * @param quaternionA Quaternion A (to be post-multiplied). + * @param quaternionB Quaternion B (to be pre-multiplied). + * @return Multiplication of two quaternions. + */ +static inline FusionQuaternion FusionQuaternionMultiply(const FusionQuaternion quaternionA, const FusionQuaternion quaternionB) { +#define A quaternionA.element +#define B quaternionB.element + const FusionQuaternion result = {.element = { + .w = A.w * B.w - A.x * B.x - A.y * B.y - A.z * B.z, + .x = A.w * B.x + A.x * B.w + A.y * B.z - A.z * B.y, + .y = A.w * B.y - A.x * B.z + A.y * B.w + A.z * B.x, + .z = A.w * B.z + A.x * B.y - A.y * B.x + A.z * B.w, + }}; + return result; +#undef A +#undef B +} + +/** + * @brief Returns the multiplication of a quaternion with a vector. This is a + * normal quaternion multiplication where the vector is treated a + * quaternion with a W element value of zero. The quaternion is post- + * multiplied by the vector. + * @param quaternion Quaternion. + * @param vector Vector. + * @return Multiplication of a quaternion with a vector. + */ +static inline FusionQuaternion FusionQuaternionMultiplyVector(const FusionQuaternion quaternion, const FusionVector vector) { +#define Q quaternion.element +#define V vector.axis + const FusionQuaternion result = {.element = { + .w = -Q.x * V.x - Q.y * V.y - Q.z * V.z, + .x = Q.w * V.x + Q.y * V.z - Q.z * V.y, + .y = Q.w * V.y - Q.x * V.z + Q.z * V.x, + .z = Q.w * V.z + Q.x * V.y - Q.y * V.x, + }}; + return result; +#undef Q +#undef V +} + +/** + * @brief Returns the normalised quaternion. + * @param quaternion Quaternion. + * @return Normalised quaternion. + */ +static inline FusionQuaternion FusionQuaternionNormalise(const FusionQuaternion quaternion) { +#define Q quaternion.element +#ifdef FUSION_USE_NORMAL_SQRT + const float magnitudeReciprocal = 1.0f / sqrtf(Q.w * Q.w + Q.x * Q.x + Q.y * Q.y + Q.z * Q.z); +#else + const float magnitudeReciprocal = FusionFastInverseSqrt(Q.w * Q.w + Q.x * Q.x + Q.y * Q.y + Q.z * Q.z); +#endif + const FusionQuaternion result = {.element = { + .w = Q.w * magnitudeReciprocal, + .x = Q.x * magnitudeReciprocal, + .y = Q.y * magnitudeReciprocal, + .z = Q.z * magnitudeReciprocal, + }}; + return result; +#undef Q +} + +//------------------------------------------------------------------------------ +// Inline functions - Matrix operations + +/** + * @brief Returns the multiplication of a matrix with a vector. + * @param matrix Matrix. + * @param vector Vector. + * @return Multiplication of a matrix with a vector. + */ +static inline FusionVector FusionMatrixMultiplyVector(const FusionMatrix matrix, const FusionVector vector) { +#define R matrix.element + const FusionVector result = {.axis = { + .x = R.xx * vector.axis.x + R.xy * vector.axis.y + R.xz * vector.axis.z, + .y = R.yx * vector.axis.x + R.yy * vector.axis.y + R.yz * vector.axis.z, + .z = R.zx * vector.axis.x + R.zy * vector.axis.y + R.zz * vector.axis.z, + }}; + return result; +#undef R +} + +//------------------------------------------------------------------------------ +// Inline functions - Conversion operations + +/** + * @brief Converts a quaternion to a rotation matrix. + * @param quaternion Quaternion. + * @return Rotation matrix. + */ +static inline FusionMatrix FusionQuaternionToMatrix(const FusionQuaternion quaternion) { +#define Q quaternion.element + const float qwqw = Q.w * Q.w; // calculate common terms to avoid repeated operations + const float qwqx = Q.w * Q.x; + const float qwqy = Q.w * Q.y; + const float qwqz = Q.w * Q.z; + const float qxqy = Q.x * Q.y; + const float qxqz = Q.x * Q.z; + const float qyqz = Q.y * Q.z; + const FusionMatrix matrix = {.element = { + .xx = 2.0f * (qwqw - 0.5f + Q.x * Q.x), + .xy = 2.0f * (qxqy - qwqz), + .xz = 2.0f * (qxqz + qwqy), + .yx = 2.0f * (qxqy + qwqz), + .yy = 2.0f * (qwqw - 0.5f + Q.y * Q.y), + .yz = 2.0f * (qyqz - qwqx), + .zx = 2.0f * (qxqz - qwqy), + .zy = 2.0f * (qyqz + qwqx), + .zz = 2.0f * (qwqw - 0.5f + Q.z * Q.z), + }}; + return matrix; +#undef Q +} + +/** + * @brief Converts a quaternion to ZYX Euler angles in degrees. + * @param quaternion Quaternion. + * @return Euler angles in degrees. + */ +static inline FusionEuler FusionQuaternionToEuler(const FusionQuaternion quaternion) { +#define Q quaternion.element + const float halfMinusQySquared = 0.5f - Q.y * Q.y; // calculate common terms to avoid repeated operations + const FusionEuler euler = {.angle = { + .roll = FusionRadiansToDegrees(atan2f(Q.w * Q.x + Q.y * Q.z, halfMinusQySquared - Q.x * Q.x)), + .pitch = FusionRadiansToDegrees(FusionAsin(2.0f * (Q.w * Q.y - Q.z * Q.x))), + .yaw = FusionRadiansToDegrees(atan2f(Q.w * Q.z + Q.x * Q.y, halfMinusQySquared - Q.z * Q.z)), + }}; + return euler; +#undef Q +} + +#endif + +//------------------------------------------------------------------------------ +// End of file diff --git a/Core/Inc/icm20948.h b/Core/Inc/icm20948.h new file mode 100644 index 0000000..7cdd7d4 --- /dev/null +++ b/Core/Inc/icm20948.h @@ -0,0 +1,9 @@ +#ifndef ICM20948_H +#define ICM20948_H + +#include "stm32l4xx_hal.h" + +void icm20948_init(void); +void icm20948_read_accel(float *ax, float *ay, float *az); + +#endif \ No newline at end of file diff --git a/Core/Inc/lcd_i2c.h b/Core/Inc/lcd_i2c.h new file mode 100644 index 0000000..0faefa9 --- /dev/null +++ b/Core/Inc/lcd_i2c.h @@ -0,0 +1,11 @@ +#ifndef LCD_I2C_H +#define LCD_I2C_H + +#include "stm32l4xx_hal.h" + +void lcd_init(void); +void lcd_clear(void); +void lcd_set_cursor(uint8_t row, uint8_t col); +void lcd_print(const char *str); + +#endif \ No newline at end of file diff --git a/Core/Inc/main.h b/Core/Inc/main.h new file mode 100644 index 0000000..519702b --- /dev/null +++ b/Core/Inc/main.h @@ -0,0 +1,93 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define B1_Pin GPIO_PIN_13 +#define B1_GPIO_Port GPIOC +#define MCO_Pin GPIO_PIN_0 +#define MCO_GPIO_Port GPIOH +#define USART_TX_Pin GPIO_PIN_2 +#define USART_TX_GPIO_Port GPIOA +#define USART_RX_Pin GPIO_PIN_3 +#define USART_RX_GPIO_Port GPIOA +#define SMPS_EN_Pin GPIO_PIN_4 +#define SMPS_EN_GPIO_Port GPIOA +#define SMPS_V1_Pin GPIO_PIN_5 +#define SMPS_V1_GPIO_Port GPIOA +#define SMPS_PG_Pin GPIO_PIN_6 +#define SMPS_PG_GPIO_Port GPIOA +#define SMPS_SW_Pin GPIO_PIN_7 +#define SMPS_SW_GPIO_Port GPIOA +#define LD4_Pin GPIO_PIN_13 +#define LD4_GPIO_Port GPIOB +#define TMS_Pin GPIO_PIN_13 +#define TMS_GPIO_Port GPIOA +#define TCK_Pin GPIO_PIN_14 +#define TCK_GPIO_Port GPIOA +#define SWO_Pin GPIO_PIN_3 +#define SWO_GPIO_Port GPIOB + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ diff --git a/Core/Inc/moto_config.h b/Core/Inc/moto_config.h new file mode 100644 index 0000000..c9fed02 --- /dev/null +++ b/Core/Inc/moto_config.h @@ -0,0 +1,155 @@ +/* + * moto_config.h + * + * Created on: Jul 24, 2025 + * Author: loren + */ + +#ifndef INC_MOTO_CONFIG_H_ +#define INC_MOTO_CONFIG_H_ + + +#include +#include + +//------------------------------------------------------------------------------ +// Constantes de configuration moto +//------------------------------------------------------------------------------ + +// Seuils d'alerte d'inclinaison (en degrés) +#define MOTO_ROLL_WARNING_THRESHOLD 20.0f // Avertissement inclinaison +#define MOTO_ROLL_DANGER_THRESHOLD 35.0f // Danger inclinaison +#define MOTO_PITCH_WHEELIE_THRESHOLD 25.0f // Détection wheelie +#define MOTO_PITCH_STOPPIE_THRESHOLD -25.0f // Détection stoppie + +// Seuils de vitesse angulaire (degrés/s) +#define MOTO_GYRO_RAPID_TURN_THRESHOLD 100.0f // Virage rapide +#define MOTO_GYRO_CRASH_THRESHOLD 300.0f // Possible chute + +// Filtrage et échantillonnage +#define MOTO_SAMPLE_RATE_HZ 100 // Fréquence d'échantillonnage +#define MOTO_SAMPLE_PERIOD (1.0f / MOTO_SAMPLE_RATE_HZ) +#define MOTO_MAG_FILTER_ALPHA 0.1f // Filtre magnétomètre +#define MOTO_ANGLE_FILTER_ALPHA 0.2f // Filtre angles affichés + +// Calibration magnétomètre (à ajuster selon votre environnement) +#define MOTO_MAG_OFFSET_X 0.0f +#define MOTO_MAG_OFFSET_Y 0.0f +#define MOTO_MAG_OFFSET_Z 0.0f +#define MOTO_MAG_SCALE_X 1.0f +#define MOTO_MAG_SCALE_Y 1.0f +#define MOTO_MAG_SCALE_Z 1.0f + +//------------------------------------------------------------------------------ +// Types de données +//------------------------------------------------------------------------------ + +typedef enum { + MOTO_STATE_NORMAL = 0, + MOTO_STATE_WARNING, + MOTO_STATE_DANGER, + MOTO_STATE_WHEELIE, + MOTO_STATE_STOPPIE, + MOTO_STATE_RAPID_TURN, + MOTO_STATE_POSSIBLE_CRASH +} MotoState_t; + +typedef struct { + float roll; + float pitch; + float yaw; + float roll_filtered; + float pitch_filtered; + float yaw_filtered; + MotoState_t state; + bool is_initializing; + uint32_t crash_detect_counter; + uint32_t last_update_time; +} MotoData_t; + +typedef struct { + float max_roll; + float min_roll; + float max_pitch; + float min_pitch; + float max_gyro_x; + float max_gyro_y; + float max_gyro_z; + uint32_t total_samples; + uint32_t warning_count; + uint32_t danger_count; +} MotoStats_t; + +//------------------------------------------------------------------------------ +// Prototypes de fonctions +//------------------------------------------------------------------------------ + +/** + * @brief Initialise les données moto + * @param data Pointeur vers la structure de données moto + */ +void Moto_InitData(MotoData_t *data); + +/** + * @brief Met à jour l'état de la moto basé sur les angles + * @param data Pointeur vers la structure de données moto + * @param roll Angle de roulis en degrés + * @param pitch Angle de tangage en degrés + * @param yaw Angle de lacet en degrés + * @param gyro_x Vitesse angulaire X en dps + * @param gyro_y Vitesse angulaire Y en dps + * @param gyro_z Vitesse angulaire Z en dps + */ +void Moto_UpdateState(MotoData_t *data, float roll, float pitch, float yaw, + float gyro_x, float gyro_y, float gyro_z); + +/** + * @brief Applique un filtre passe-bas aux angles + * @param data Pointeur vers la structure de données moto + */ +void Moto_FilterAngles(MotoData_t *data); + +/** + * @brief Retourne une chaîne décrivant l'état actuel + * @param state État de la moto + * @return Pointeur vers la chaîne de caractères + */ +const char* Moto_GetStateString(MotoState_t state); + +/** + * @brief Met à jour les statistiques de conduite + * @param stats Pointeur vers la structure de statistiques + * @param data Pointeur vers les données actuelles + * @param gyro_x Vitesse angulaire X + * @param gyro_y Vitesse angulaire Y + * @param gyro_z Vitesse angulaire Z + */ +void Moto_UpdateStats(MotoStats_t *stats, const MotoData_t *data, + float gyro_x, float gyro_y, float gyro_z); + +/** + * @brief Calibre les données du magnétomètre + * @param mx Pointeur vers la composante X + * @param my Pointeur vers la composante Y + * @param mz Pointeur vers la composante Z + */ +void Moto_CalibrateMagnetometer(float *mx, float *my, float *mz); + +/** + * @brief Détecte une possible chute + * @param data Pointeur vers la structure de données moto + * @param gyro_magnitude Magnitude de la vitesse angulaire + * @return true si chute détectée + */ +bool Moto_DetectCrash(MotoData_t *data, float gyro_magnitude); + +/** + * @brief Formate l'affichage pour l'écran LCD selon l'état + * @param data Pointeur vers les données moto + * @param line Numéro de ligne (0-3) + * @param buffer Buffer de sortie (21 caractères) + */ +void Moto_FormatDisplay(const MotoData_t *data, int line, char *buffer); + + +#endif /* INC_MOTO_CONFIG_H_ */ diff --git a/Core/Inc/stm32l4xx_hal_conf.h b/Core/Inc/stm32l4xx_hal_conf.h new file mode 100644 index 0000000..8080ee6 --- /dev/null +++ b/Core/Inc/stm32l4xx_hal_conf.h @@ -0,0 +1,482 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32l4xx_hal_conf.h. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_CONF_H +#define STM32L4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_CAN_MODULE_ENABLED */ +/*#define HAL_COMP_MODULE_ENABLED */ +#define HAL_I2C_MODULE_ENABLED +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_DAC_MODULE_ENABLED */ +/*#define HAL_DCMI_MODULE_ENABLED */ +/*#define HAL_DMA2D_MODULE_ENABLED */ +/*#define HAL_DFSDM_MODULE_ENABLED */ +/*#define HAL_DSI_MODULE_ENABLED */ +/*#define HAL_FIREWALL_MODULE_ENABLED */ +/*#define HAL_GFXMMU_MODULE_ENABLED */ +/*#define HAL_HCD_MODULE_ENABLED */ +/*#define HAL_HASH_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_LTDC_MODULE_ENABLED */ +/*#define HAL_LCD_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +/*#define HAL_MMC_MODULE_ENABLED */ +/*#define HAL_NAND_MODULE_ENABLED */ +/*#define HAL_NOR_MODULE_ENABLED */ +/*#define HAL_OPAMP_MODULE_ENABLED */ +/*#define HAL_OSPI_MODULE_ENABLED */ +/*#define HAL_OSPI_MODULE_ENABLED */ +/*#define HAL_PCD_MODULE_ENABLED */ +/*#define HAL_PKA_MODULE_ENABLED */ +/*#define HAL_QSPI_MODULE_ENABLED */ +/*#define HAL_QSPI_MODULE_ENABLED */ +/*#define HAL_RNG_MODULE_ENABLED */ +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SAI_MODULE_ENABLED */ +/*#define HAL_SD_MODULE_ENABLED */ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_SRAM_MODULE_ENABLED */ +/*#define HAL_SWPMI_MODULE_ENABLED */ +/*#define HAL_TIM_MODULE_ENABLED */ +/*#define HAL_TSC_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ +/*#define HAL_EXTI_MODULE_ENABLED */ +/*#define HAL_PSSI_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) + #define MSI_VALUE ((uint32_t)4000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. + The real value my vary depending on manufacturing process variations.*/ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for SAI1 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) + #define EXTERNAL_SAI1_CLOCK_VALUE 2097000U /*!< Value of the SAI1 External clock source in Hz*/ +#endif /* EXTERNAL_SAI1_CLOCK_VALUE */ + +/** + * @brief External clock source for SAI2 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI2_CLOCK_VALUE) + #define EXTERNAL_SAI2_CLOCK_VALUE 48000U /*!< Value of the SAI2 External clock source in Hz*/ +#endif /* EXTERNAL_SAI2_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ + +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Register callback feature configuration ############### */ +/** + * @brief Set below the peripheral configuration to "1U" to add the support + * of HAL callback registration/deregistration feature for the HAL + * driver(s). This allows user application to provide specific callback + * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting + * the default weak callback functions (see each stm32l4xx_hal_ppp.h file + * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef + * for each PPP peripheral). + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U +#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U +#define USE_HAL_OSPI_REGISTER_CALLBACKS 0U +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U +#define USE_HAL_SD_REGISTER_CALLBACKS 0U +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U +#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U +#define USE_HAL_TSC_REGISTER_CALLBACKS 0U +#define USE_HAL_UART_REGISTER_CALLBACKS 0U +#define USE_HAL_USART_REGISTER_CALLBACKS 0U +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32l4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32l4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32l4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32l4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32l4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32l4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32l4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "Legacy/stm32l4xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32l4xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32l4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32l4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32l4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32l4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32l4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32l4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32l4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_GFXMMU_MODULE_ENABLED + #include "stm32l4xx_hal_gfxmmu.h" +#endif /* HAL_GFXMMU_MODULE_ENABLED */ + +#ifdef HAL_FIREWALL_MODULE_ENABLED + #include "stm32l4xx_hal_firewall.h" +#endif /* HAL_FIREWALL_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32l4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32l4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32l4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32l4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32l4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32l4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED + #include "stm32l4xx_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32l4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32l4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32l4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32l4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32l4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED + #include "stm32l4xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_OSPI_MODULE_ENABLED + #include "stm32l4xx_hal_ospi.h" +#endif /* HAL_OSPI_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32l4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PKA_MODULE_ENABLED + #include "stm32l4xx_hal_pka.h" +#endif /* HAL_PKA_MODULE_ENABLED */ + +#ifdef HAL_PSSI_MODULE_ENABLED + #include "stm32l4xx_hal_pssi.h" +#endif /* HAL_PSSI_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32l4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32l4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32l4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32l4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32l4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32l4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32l4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32l4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32l4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32l4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32l4xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32l4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32l4xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32l4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32l4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32l4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_CONF_H */ diff --git a/Core/Inc/stm32l4xx_it.h b/Core/Inc/stm32l4xx_it.h new file mode 100644 index 0000000..b9bfcf8 --- /dev/null +++ b/Core/Inc/stm32l4xx_it.h @@ -0,0 +1,66 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32l4xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L4xx_IT_H +#define __STM32L4xx_IT_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L4xx_IT_H */ diff --git a/Core/Src/FusionAhrs.c b/Core/Src/FusionAhrs.c new file mode 100644 index 0000000..52272df --- /dev/null +++ b/Core/Src/FusionAhrs.c @@ -0,0 +1,510 @@ +/** + * @file FusionAhrs.c + * @author Seb Madgwick + * @brief AHRS algorithm to combine gyroscope, accelerometer, and magnetometer + * measurements into a single measurement of orientation relative to the Earth. + */ + +//------------------------------------------------------------------------------ +// Includes + +#include +#include "FusionAhrs.h" +#include + +//------------------------------------------------------------------------------ +// Definitions + +/** + * @brief Initial gain used during the initialisation. + */ +#define INITIAL_GAIN (10.0f) + +/** + * @brief Initialisation period in seconds. + */ +#define INITIALISATION_PERIOD (3.0f) + +//------------------------------------------------------------------------------ +// Function declarations + +static inline FusionVector HalfGravity(const FusionAhrs *const ahrs); + +static inline FusionVector HalfMagnetic(const FusionAhrs *const ahrs); + +static inline FusionVector Feedback(const FusionVector sensor, const FusionVector reference); + +static inline int Clamp(const int value, const int min, const int max); + +//------------------------------------------------------------------------------ +// Functions + +/** + * @brief Initialises the AHRS algorithm² structure. + * @param ahrs AHRS algorithm structure. + */ +void FusionAhrsInitialise(FusionAhrs *const ahrs) { + const FusionAhrsSettings settings = { + .convention = FusionConventionNwu, + .gain = 0.5f, + .gyroscopeRange = 0.0f, + .accelerationRejection = 90.0f, + .magneticRejection = 90.0f, + .recoveryTriggerPeriod = 0, + }; + FusionAhrsSetSettings(ahrs, &settings); + FusionAhrsReset(ahrs); +} + +/** + * @brief Resets the AHRS algorithm. This is equivalent to reinitialising the + * algorithm while maintaining the current settings. + * @param ahrs AHRS algorithm structure. + */ +void FusionAhrsReset(FusionAhrs *const ahrs) { + ahrs->quaternion = FUSION_IDENTITY_QUATERNION; + ahrs->accelerometer = FUSION_VECTOR_ZERO; + ahrs->initialising = true; + ahrs->rampedGain = INITIAL_GAIN; + ahrs->angularRateRecovery = false; + ahrs->halfAccelerometerFeedback = FUSION_VECTOR_ZERO; + ahrs->halfMagnetometerFeedback = FUSION_VECTOR_ZERO; + ahrs->accelerometerIgnored = false; + ahrs->accelerationRecoveryTrigger = 0; + ahrs->accelerationRecoveryTimeout = ahrs->settings.recoveryTriggerPeriod; + ahrs->magnetometerIgnored = false; + ahrs->magneticRecoveryTrigger = 0; + ahrs->magneticRecoveryTimeout = ahrs->settings.recoveryTriggerPeriod; +} + +/** + * @brief Sets the AHRS algorithm settings. + * @param ahrs AHRS algorithm structure. + * @param settings Settings. + */ +void FusionAhrsSetSettings(FusionAhrs *const ahrs, const FusionAhrsSettings *const settings) { + ahrs->settings.convention = settings->convention; + ahrs->settings.gain = settings->gain; + ahrs->settings.gyroscopeRange = settings->gyroscopeRange == 0.0f ? FLT_MAX : 0.98f * settings->gyroscopeRange; + ahrs->settings.accelerationRejection = settings->accelerationRejection == 0.0f ? FLT_MAX : powf(0.5f * sinf(FusionDegreesToRadians(settings->accelerationRejection)), 2); + ahrs->settings.magneticRejection = settings->magneticRejection == 0.0f ? FLT_MAX : powf(0.5f * sinf(FusionDegreesToRadians(settings->magneticRejection)), 2); + ahrs->settings.recoveryTriggerPeriod = settings->recoveryTriggerPeriod; + ahrs->accelerationRecoveryTimeout = ahrs->settings.recoveryTriggerPeriod; + ahrs->magneticRecoveryTimeout = ahrs->settings.recoveryTriggerPeriod; + if ((settings->gain == 0.0f) || (settings->recoveryTriggerPeriod == 0)) { // disable acceleration and magnetic rejection features if gain is zero + ahrs->settings.accelerationRejection = FLT_MAX; + ahrs->settings.magneticRejection = FLT_MAX; + } + if (ahrs->initialising == false) { + ahrs->rampedGain = ahrs->settings.gain; + } + ahrs->rampedGainStep = (INITIAL_GAIN - ahrs->settings.gain) / INITIALISATION_PERIOD; +} + +/** + * @brief Updates the AHRS algorithm using the gyroscope, accelerometer, and + * magnetometer measurements. + * @param ahrs AHRS algorithm structure. + * @param gyroscope Gyroscope measurement in degrees per second. + * @param accelerometer Accelerometer measurement in g. + * @param magnetometer Magnetometer measurement in arbitrary units. + * @param deltaTime Delta time in seconds. + */ +void FusionAhrsUpdate(FusionAhrs *const ahrs, const FusionVector gyroscope, const FusionVector accelerometer, const FusionVector magnetometer, const float deltaTime) { +#define Q ahrs->quaternion.element + + // Store accelerometer + ahrs->accelerometer = accelerometer; + + // Reinitialise if gyroscope range exceeded + if ((fabsf(gyroscope.axis.x) > ahrs->settings.gyroscopeRange) || (fabsf(gyroscope.axis.y) > ahrs->settings.gyroscopeRange) || (fabsf(gyroscope.axis.z) > ahrs->settings.gyroscopeRange)) { + const FusionQuaternion quaternion = ahrs->quaternion; + FusionAhrsReset(ahrs); + ahrs->quaternion = quaternion; + ahrs->angularRateRecovery = true; + } + + // Ramp down gain during initialisation + if (ahrs->initialising) { + ahrs->rampedGain -= ahrs->rampedGainStep * deltaTime; + if ((ahrs->rampedGain < ahrs->settings.gain) || (ahrs->settings.gain == 0.0f)) { + ahrs->rampedGain = ahrs->settings.gain; + ahrs->initialising = false; + ahrs->angularRateRecovery = false; + } + } + + // Calculate direction of gravity indicated by algorithm + const FusionVector halfGravity = HalfGravity(ahrs); + + // Calculate accelerometer feedback + FusionVector halfAccelerometerFeedback = FUSION_VECTOR_ZERO; + ahrs->accelerometerIgnored = true; + if (FusionVectorIsZero(accelerometer) == false) { + + // Calculate accelerometer feedback scaled by 0.5 + ahrs->halfAccelerometerFeedback = Feedback(FusionVectorNormalise(accelerometer), halfGravity); + + // Don't ignore accelerometer if acceleration error below threshold + if (ahrs->initialising || ((FusionVectorMagnitudeSquared(ahrs->halfAccelerometerFeedback) <= ahrs->settings.accelerationRejection))) { + ahrs->accelerometerIgnored = false; + ahrs->accelerationRecoveryTrigger -= 9; + } else { + ahrs->accelerationRecoveryTrigger += 1; + } + + // Don't ignore accelerometer during acceleration recovery + if (ahrs->accelerationRecoveryTrigger > ahrs->accelerationRecoveryTimeout) { + ahrs->accelerationRecoveryTimeout = 0; + ahrs->accelerometerIgnored = false; + } else { + ahrs->accelerationRecoveryTimeout = ahrs->settings.recoveryTriggerPeriod; + } + ahrs->accelerationRecoveryTrigger = Clamp(ahrs->accelerationRecoveryTrigger, 0, ahrs->settings.recoveryTriggerPeriod); + + // Apply accelerometer feedback + if (ahrs->accelerometerIgnored == false) { + halfAccelerometerFeedback = ahrs->halfAccelerometerFeedback; + } + } + + // Calculate magnetometer feedback + FusionVector halfMagnetometerFeedback = FUSION_VECTOR_ZERO; + ahrs->magnetometerIgnored = true; + if (FusionVectorIsZero(magnetometer) == false) { + + // Calculate direction of magnetic field indicated by algorithm + const FusionVector halfMagnetic = HalfMagnetic(ahrs); + + // Calculate magnetometer feedback scaled by 0.5 + ahrs->halfMagnetometerFeedback = Feedback(FusionVectorNormalise(FusionVectorCrossProduct(halfGravity, magnetometer)), halfMagnetic); + + // Don't ignore magnetometer if magnetic error below threshold + if (ahrs->initialising || ((FusionVectorMagnitudeSquared(ahrs->halfMagnetometerFeedback) <= ahrs->settings.magneticRejection))) { + ahrs->magnetometerIgnored = false; + ahrs->magneticRecoveryTrigger -= 9; + } else { + ahrs->magneticRecoveryTrigger += 1; + } + + // Don't ignore magnetometer during magnetic recovery + if (ahrs->magneticRecoveryTrigger > ahrs->magneticRecoveryTimeout) { + ahrs->magneticRecoveryTimeout = 0; + ahrs->magnetometerIgnored = false; + } else { + ahrs->magneticRecoveryTimeout = ahrs->settings.recoveryTriggerPeriod; + } + ahrs->magneticRecoveryTrigger = Clamp(ahrs->magneticRecoveryTrigger, 0, ahrs->settings.recoveryTriggerPeriod); + + // Apply magnetometer feedback + if (ahrs->magnetometerIgnored == false) { + halfMagnetometerFeedback = ahrs->halfMagnetometerFeedback; + } + } + + // Convert gyroscope to radians per second scaled by 0.5 + const FusionVector halfGyroscope = FusionVectorMultiplyScalar(gyroscope, FusionDegreesToRadians(0.5f)); + + // Apply feedback to gyroscope + const FusionVector adjustedHalfGyroscope = FusionVectorAdd(halfGyroscope, FusionVectorMultiplyScalar(FusionVectorAdd(halfAccelerometerFeedback, halfMagnetometerFeedback), ahrs->rampedGain)); + + // Integrate rate of change of quaternion + ahrs->quaternion = FusionQuaternionAdd(ahrs->quaternion, FusionQuaternionMultiplyVector(ahrs->quaternion, FusionVectorMultiplyScalar(adjustedHalfGyroscope, deltaTime))); + + // Normalise quaternion + ahrs->quaternion = FusionQuaternionNormalise(ahrs->quaternion); +#undef Q +} + +/** + * @brief Returns the direction of gravity scaled by 0.5. + * @param ahrs AHRS algorithm structure. + * @return Direction of gravity scaled by 0.5. + */ +static inline FusionVector HalfGravity(const FusionAhrs *const ahrs) { +#define Q ahrs->quaternion.element + switch (ahrs->settings.convention) { + case FusionConventionNwu: + case FusionConventionEnu: { + const FusionVector halfGravity = {.axis = { + .x = Q.x * Q.z - Q.w * Q.y, + .y = Q.y * Q.z + Q.w * Q.x, + .z = Q.w * Q.w - 0.5f + Q.z * Q.z, + }}; // third column of transposed rotation matrix scaled by 0.5 + return halfGravity; + } + case FusionConventionNed: { + const FusionVector halfGravity = {.axis = { + .x = Q.w * Q.y - Q.x * Q.z, + .y = -1.0f * (Q.y * Q.z + Q.w * Q.x), + .z = 0.5f - Q.w * Q.w - Q.z * Q.z, + }}; // third column of transposed rotation matrix scaled by -0.5 + return halfGravity; + } + } + return FUSION_VECTOR_ZERO; // avoid compiler warning +#undef Q +} + +/** + * @brief Returns the direction of the magnetic field scaled by 0.5. + * @param ahrs AHRS algorithm structure. + * @return Direction of the magnetic field scaled by 0.5. + */ +static inline FusionVector HalfMagnetic(const FusionAhrs *const ahrs) { +#define Q ahrs->quaternion.element + switch (ahrs->settings.convention) { + case FusionConventionNwu: { + const FusionVector halfMagnetic = {.axis = { + .x = Q.x * Q.y + Q.w * Q.z, + .y = Q.w * Q.w - 0.5f + Q.y * Q.y, + .z = Q.y * Q.z - Q.w * Q.x, + }}; // second column of transposed rotation matrix scaled by 0.5 + return halfMagnetic; + } + case FusionConventionEnu: { + const FusionVector halfMagnetic = {.axis = { + .x = 0.5f - Q.w * Q.w - Q.x * Q.x, + .y = Q.w * Q.z - Q.x * Q.y, + .z = -1.0f * (Q.x * Q.z + Q.w * Q.y), + }}; // first column of transposed rotation matrix scaled by -0.5 + return halfMagnetic; + } + case FusionConventionNed: { + const FusionVector halfMagnetic = {.axis = { + .x = -1.0f * (Q.x * Q.y + Q.w * Q.z), + .y = 0.5f - Q.w * Q.w - Q.y * Q.y, + .z = Q.w * Q.x - Q.y * Q.z, + }}; // second column of transposed rotation matrix scaled by -0.5 + return halfMagnetic; + } + } + return FUSION_VECTOR_ZERO; // avoid compiler warning +#undef Q +} + +/** + * @brief Returns the feedback. + * @param sensor Sensor. + * @param reference Reference. + * @return Feedback. + */ +static inline FusionVector Feedback(const FusionVector sensor, const FusionVector reference) { + if (FusionVectorDotProduct(sensor, reference) < 0.0f) { // if error is >90 degrees + return FusionVectorNormalise(FusionVectorCrossProduct(sensor, reference)); + } + return FusionVectorCrossProduct(sensor, reference); +} + +/** + * @brief Returns a value limited to maximum and minimum. + * @param value Value. + * @param min Minimum value. + * @param max Maximum value. + * @return Value limited to maximum and minimum. + */ +static inline int Clamp(const int value, const int min, const int max) { + if (value < min) { + return min; + } + if (value > max) { + return max; + } + return value; +} + +/** + * @brief Updates the AHRS algorithm using the gyroscope and accelerometer + * measurements only. + * @param ahrs AHRS algorithm structure. + * @param gyroscope Gyroscope measurement in degrees per second. + * @param accelerometer Accelerometer measurement in g. + * @param deltaTime Delta time in seconds. + */ +void FusionAhrsUpdateNoMagnetometer(FusionAhrs *const ahrs, const FusionVector gyroscope, const FusionVector accelerometer, const float deltaTime) { + + // Update AHRS algorithm + FusionAhrsUpdate(ahrs, gyroscope, accelerometer, FUSION_VECTOR_ZERO, deltaTime); + + // Zero heading during initialisation + if (ahrs->initialising) { + FusionAhrsSetHeading(ahrs, 0.0f); + } +} + +/** + * @brief Updates the AHRS algorithm using the gyroscope, accelerometer, and + * heading measurements. + * @param ahrs AHRS algorithm structure. + * @param gyroscope Gyroscope measurement in degrees per second. + * @param accelerometer Accelerometer measurement in g. + * @param heading Heading measurement in degrees. + * @param deltaTime Delta time in seconds. + */ +void FusionAhrsUpdateExternalHeading(FusionAhrs *const ahrs, const FusionVector gyroscope, const FusionVector accelerometer, const float heading, const float deltaTime) { +#define Q ahrs->quaternion.element + + // Calculate roll + const float roll = atan2f(Q.w * Q.x + Q.y * Q.z, 0.5f - Q.y * Q.y - Q.x * Q.x); + + // Calculate magnetometer + const float headingRadians = FusionDegreesToRadians(heading); + const float sinHeadingRadians = sinf(headingRadians); + const FusionVector magnetometer = {.axis = { + .x = cosf(headingRadians), + .y = -1.0f * cosf(roll) * sinHeadingRadians, + .z = sinHeadingRadians * sinf(roll), + }}; + + // Update AHRS algorithm + FusionAhrsUpdate(ahrs, gyroscope, accelerometer, magnetometer, deltaTime); +#undef Q +} + +/** + * @brief Returns the quaternion describing the sensor relative to the Earth. + * @param ahrs AHRS algorithm structure. + * @return Quaternion describing the sensor relative to the Earth. + */ +FusionQuaternion FusionAhrsGetQuaternion(const FusionAhrs *const ahrs) { + return ahrs->quaternion; +} + +/** + * @brief Sets the quaternion describing the sensor relative to the Earth. + * @param ahrs AHRS algorithm structure. + * @param quaternion Quaternion describing the sensor relative to the Earth. + */ +void FusionAhrsSetQuaternion(FusionAhrs *const ahrs, const FusionQuaternion quaternion) { + ahrs->quaternion = quaternion; +} + +/** + * @brief Returns the direction of gravity in the sensor coordinate frame. + * @param ahrs AHRS algorithm structure. + * @return Direction of gravity in the sensor coordinate frame. + */ +FusionVector FusionAhrsGetGravity(const FusionAhrs *const ahrs) { +#define Q ahrs->quaternion.element + const FusionVector gravity = {.axis = { + .x = 2.0f * (Q.x * Q.z - Q.w * Q.y), + .y = 2.0f * (Q.y * Q.z + Q.w * Q.x), + .z = 2.0f * (Q.w * Q.w - 0.5f + Q.z * Q.z), + }}; // third column of transposed rotation matrix + return gravity; +#undef Q +} + +/** + * @brief Returns the linear acceleration measurement equal to the accelerometer + * measurement with gravity removed. + * @param ahrs AHRS algorithm structure. + * @return Linear acceleration measurement in g. + */ +FusionVector FusionAhrsGetLinearAcceleration(const FusionAhrs *const ahrs) { + switch (ahrs->settings.convention) { + case FusionConventionNwu: + case FusionConventionEnu: { + return FusionVectorSubtract(ahrs->accelerometer, FusionAhrsGetGravity(ahrs)); + } + case FusionConventionNed: { + return FusionVectorAdd(ahrs->accelerometer, FusionAhrsGetGravity(ahrs)); + } + } + return FUSION_VECTOR_ZERO; // avoid compiler warning +} + +/** + * @brief Returns the Earth acceleration measurement equal to accelerometer + * measurement in the Earth coordinate frame with gravity removed. + * @param ahrs AHRS algorithm structure. + * @return Earth acceleration measurement in g. + */ +FusionVector FusionAhrsGetEarthAcceleration(const FusionAhrs *const ahrs) { +#define Q ahrs->quaternion.element +#define A ahrs->accelerometer.axis + + // Calculate accelerometer measurement in the Earth coordinate frame + const float qwqw = Q.w * Q.w; // calculate common terms to avoid repeated operations + const float qwqx = Q.w * Q.x; + const float qwqy = Q.w * Q.y; + const float qwqz = Q.w * Q.z; + const float qxqy = Q.x * Q.y; + const float qxqz = Q.x * Q.z; + const float qyqz = Q.y * Q.z; + FusionVector accelerometer = {.axis = { + .x = 2.0f * ((qwqw - 0.5f + Q.x * Q.x) * A.x + (qxqy - qwqz) * A.y + (qxqz + qwqy) * A.z), + .y = 2.0f * ((qxqy + qwqz) * A.x + (qwqw - 0.5f + Q.y * Q.y) * A.y + (qyqz - qwqx) * A.z), + .z = 2.0f * ((qxqz - qwqy) * A.x + (qyqz + qwqx) * A.y + (qwqw - 0.5f + Q.z * Q.z) * A.z), + }}; // rotation matrix multiplied with the accelerometer + + // Remove gravity from accelerometer measurement + switch (ahrs->settings.convention) { + case FusionConventionNwu: + case FusionConventionEnu: + accelerometer.axis.z -= 1.0f; + break; + case FusionConventionNed: + accelerometer.axis.z += 1.0f; + break; + } + return accelerometer; +#undef Q +#undef A +} + +/** + * @brief Returns the AHRS algorithm internal states. + * @param ahrs AHRS algorithm structure. + * @return AHRS algorithm internal states. + */ +FusionAhrsInternalStates FusionAhrsGetInternalStates(const FusionAhrs *const ahrs) { + const FusionAhrsInternalStates internalStates = { + .accelerationError = FusionRadiansToDegrees(FusionAsin(2.0f * FusionVectorMagnitude(ahrs->halfAccelerometerFeedback))), + .accelerometerIgnored = ahrs->accelerometerIgnored, + .accelerationRecoveryTrigger = ahrs->settings.recoveryTriggerPeriod == 0 ? 0.0f : (float) ahrs->accelerationRecoveryTrigger / (float) ahrs->settings.recoveryTriggerPeriod, + .magneticError = FusionRadiansToDegrees(FusionAsin(2.0f * FusionVectorMagnitude(ahrs->halfMagnetometerFeedback))), + .magnetometerIgnored = ahrs->magnetometerIgnored, + .magneticRecoveryTrigger = ahrs->settings.recoveryTriggerPeriod == 0 ? 0.0f : (float) ahrs->magneticRecoveryTrigger / (float) ahrs->settings.recoveryTriggerPeriod, + }; + return internalStates; +} + +/** + * @brief Returns the AHRS algorithm flags. + * @param ahrs AHRS algorithm structure. + * @return AHRS algorithm flags. + */ +FusionAhrsFlags FusionAhrsGetFlags(const FusionAhrs *const ahrs) { + const FusionAhrsFlags flags = { + .initialising = ahrs->initialising, + .angularRateRecovery = ahrs->angularRateRecovery, + .accelerationRecovery = ahrs->accelerationRecoveryTrigger > ahrs->accelerationRecoveryTimeout, + .magneticRecovery= ahrs->magneticRecoveryTrigger > ahrs->magneticRecoveryTimeout, + }; + return flags; +} + +/** + * @brief Sets the heading of the orientation measurement provided by the AHRS + * algorithm. This function can be used to reset drift in heading when the AHRS + * algorithm is being used without a magnetometer. + * @param ahrs AHRS algorithm structure. + * @param heading Heading angle in degrees. + */ +void FusionAhrsSetHeading(FusionAhrs *const ahrs, const float heading) { +#define Q ahrs->quaternion.element + const float yaw = atan2f(Q.w * Q.z + Q.x * Q.y, 0.5f - Q.y * Q.y - Q.z * Q.z); + const float halfYawMinusHeading = 0.5f * (yaw - FusionDegreesToRadians(heading)); + const FusionQuaternion rotation = {.element = { + .w = cosf(halfYawMinusHeading), + .x = 0.0f, + .y = 0.0f, + .z = -1.0f * sinf(halfYawMinusHeading), + }}; + ahrs->quaternion = FusionQuaternionMultiply(rotation, ahrs->quaternion); +#undef Q +} + +//------------------------------------------------------------------------------ +// End of file diff --git a/Core/Src/icm20948.c b/Core/Src/icm20948.c new file mode 100644 index 0000000..00a127c --- /dev/null +++ b/Core/Src/icm20948.c @@ -0,0 +1,85 @@ +#include "icm20948.h" + +extern I2C_HandleTypeDef hi2c1; +#define ICM20948_ADDR (0x69 << 1) + +uint8_t read_register(uint8_t reg) { + uint8_t val; + HAL_I2C_Mem_Read(&hi2c1, ICM20948_ADDR, reg, 1, &val, 1, HAL_MAX_DELAY); + return val; +} + +void write_register(uint8_t reg, uint8_t val) { + HAL_I2C_Mem_Write(&hi2c1, ICM20948_ADDR, reg, 1, &val, 1, HAL_MAX_DELAY); +} + +void icm20948_select_bank(uint8_t bank) { + write_register(0x7F, bank << 4); // REG_BANK_SEL (0x7F) +} + +void icm20948_init(void) { + icm20948_select_bank(0); // BANK 0 + write_register(0x06, 0x01); // PWR_MGMT_1: reset + HAL_Delay(10); + write_register(0x06, 0x01); // Clock source auto + + icm20948_select_bank(2); // BANK 2 + // write_register(0x14, 0x00); // ACCEL_CONFIG: ±2g + write_register(0x14, 0x04); // ACCEL_CONFIG : ±8g (bits 2:1 = 10) + + icm20948_select_bank(0); // Revenir en BANK 0 pour lecture +} + +void icm20948_read_accel(float *ax, float *ay, float *az) { + uint8_t data[6]; + HAL_I2C_Mem_Read(&hi2c1, ICM20948_ADDR, 0x2D, 1, data, 6, HAL_MAX_DELAY); + int16_t x = (data[0] << 8) | data[1]; + int16_t y = (data[2] << 8) | data[3]; + int16_t z = (data[4] << 8) | data[5]; + //*ax = (float)x / 16384.0f; + //*ay = (float)y / 16384.0f; + //*az = (float)z / 16384.0f; + *ax = (float)x / 4096.0f; + *ay = (float)y / 4096.0f; + *az = (float)z / 4096.0f; + +} + +void icm20948_read_gyro(float *gx, float *gy, float *gz) { + uint8_t data[6]; + icm20948_select_bank(0); + HAL_I2C_Mem_Read(&hi2c1, ICM20948_ADDR, 0x33, 1, data, 6, HAL_MAX_DELAY); + int16_t x = (data[0] << 8) | data[1]; + int16_t y = (data[2] << 8) | data[3]; + int16_t z = (data[4] << 8) | data[5]; + *gx = (float)x / 131.0f; // sensibilité typique ±250 dps + *gy = (float)y / 131.0f; + *gz = (float)z / 131.0f; +} + + + +void icm20948_mag_init(void) { + icm20948_select_bank(3); + // Configurer le bus maître I2C (ex : 400 kHz) + write_register(0x01, 0x07); // I2C_MST_CTRL, 400 kHz + // Configure la lecture du magnéto via I2C Master + // Exemples de setup (registres slave 0, adresse, etc.) + // ... + icm20948_select_bank(0); +} + +void icm20948_read_mag(float *mx, float *my, float *mz) { + uint8_t data[6]; + // Lecture des registres magnéto via I2C Master + // Par défaut les données du magnétomètre sont relayées en registres USER_MAG_DATA_X/Y/Z + // ou on doit lire via I2C Master + // Exemple simplifié : + HAL_I2C_Mem_Read(&hi2c1, ICM20948_ADDR, 0x31, 1, data, 6, HAL_MAX_DELAY); + int16_t x = (data[1] << 8) | data[0]; // Attention à l’ordre des octets pour AK09916 + int16_t y = (data[3] << 8) | data[2]; + int16_t z = (data[5] << 8) | data[4]; + *mx = (float)x * 0.15f; // conversion en µT (selon datasheet) + *my = (float)y * 0.15f; + *mz = (float)z * 0.15f; +} diff --git a/Core/Src/lcd_i2c.c b/Core/Src/lcd_i2c.c new file mode 100644 index 0000000..5e14bd4 --- /dev/null +++ b/Core/Src/lcd_i2c.c @@ -0,0 +1,57 @@ +#include "lcd_i2c.h" +#include + +extern I2C_HandleTypeDef hi2c1; +#define LCD_ADDR (0x27 << 1) +#define LCD_BACKLIGHT 0x08 +#define LCD_ENABLE 0x04 + +void lcd_send_cmd(uint8_t cmd); +void lcd_send_data(uint8_t data); +void lcd_send(uint8_t data, uint8_t mode); + +void lcd_init(void) { + HAL_Delay(50); + lcd_send_cmd(0x33); + lcd_send_cmd(0x32); + lcd_send_cmd(0x28); + lcd_send_cmd(0x0C); + lcd_send_cmd(0x06); + lcd_send_cmd(0x01); + HAL_Delay(5); +} + +void lcd_clear(void) { + lcd_send_cmd(0x01); + HAL_Delay(2); +} + +void lcd_set_cursor(uint8_t row, uint8_t col) { + const uint8_t row_offsets[] = {0x00, 0x40, 0x14, 0x54}; + lcd_send_cmd(0x80 | (col + row_offsets[row])); +} + +void lcd_print(const char *str) { + while (*str) { + lcd_send_data((uint8_t)(*str++)); + } +} + +void lcd_send_cmd(uint8_t cmd) { + lcd_send(cmd, 0); +} + +void lcd_send_data(uint8_t data) { + lcd_send(data, 1); +} + +void lcd_send(uint8_t data, uint8_t mode) { + uint8_t high = (data & 0xF0) | LCD_BACKLIGHT | (mode ? 0x01 : 0); + uint8_t low = ((data << 4) & 0xF0) | LCD_BACKLIGHT | (mode ? 0x01 : 0); + + uint8_t data_arr[4] = { + high | LCD_ENABLE, high, + low | LCD_ENABLE, low + }; + HAL_I2C_Master_Transmit(&hi2c1, LCD_ADDR, data_arr, 4, HAL_MAX_DELAY); +} \ No newline at end of file diff --git a/Core/Src/main.c b/Core/Src/main.c new file mode 100644 index 0000000..23ebfe2 --- /dev/null +++ b/Core/Src/main.c @@ -0,0 +1,328 @@ +#include +#include +#include "main.h" +#include "lcd_i2c.h" +#include "icm20948.h" +#include "FusionAhrs.h" +#include "moto_config.h" + +I2C_HandleTypeDef hi2c1; +UART_HandleTypeDef huart2; + +FusionAhrs ahrs; +MotoData_t moto_data; +MotoStats_t moto_stats = {0}; + +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +static void MX_I2C1_Init(void); +static void MX_USART2_UART_Init(void); + +int __io_putchar(int ch) { + HAL_UART_Transmit(&huart2, (uint8_t *)&ch, 1, HAL_MAX_DELAY); + return ch; +} + +// Variables pour le filtrage du magnétomètre +float mx_filtered = 0.0f, my_filtered = 0.0f, mz_filtered = 0.0f; + +int main(void) { + HAL_Init(); + SystemClock_Config(); + MX_GPIO_Init(); + MX_I2C1_Init(); + MX_USART2_UART_Init(); + + // Initialisation de l'écran + lcd_init(); + lcd_clear(); + lcd_set_cursor(0, 0); + lcd_print("MOTO IMU SYSTEM"); + HAL_Delay(1000); + + // Initialisation de l'IMU + icm20948_init(); + + // Initialisation de la fusion AHRS + FusionAhrsInitialise(&ahrs); + + FusionAhrsSettings settings = { + .convention = FusionConventionNed, // North-East-Down pour véhicule + .gain = 0.75f, // Gain plus élevé pour réactivité sur moto + .gyroscopeRange = 2000.0f, // Range du gyroscope en dps + .accelerationRejection = 15.0f, // Rejet modéré (vibrations moto) + .magneticRejection = 30.0f, // Rejet élevé (interférences métalliques) + .recoveryTriggerPeriod = (int)(2.0f / MOTO_SAMPLE_PERIOD) // 2 secondes + }; + FusionAhrsSetSettings(&ahrs, &settings); + + // Initialisation des données moto + Moto_InitData(&moto_data); + + + + uint32_t last_time = HAL_GetTick(); + uint32_t init_start_time = last_time; + uint32_t display_update_counter = 0; + + while (1) { + uint32_t current_time = HAL_GetTick(); + float dt = (current_time - last_time) / 1000.0f; + + if (dt >= MOTO_SAMPLE_PERIOD) { + float ax, ay, az; // Accéléromètre + float gx, gy, gz; // Gyroscope + float mx, my, mz; // Magnétomètre + + // Lecture des capteurs + icm20948_read_accel(&ax, &ay, &az); + icm20948_read_gyro(&gx, &gy, &gz); + icm20948_read_mag(&mx, &my, &mz); + + // Calibration et filtrage du magnétomètre + Moto_CalibrateMagnetometer(&mx, &my, &mz); + mx_filtered = MOTO_MAG_FILTER_ALPHA * mx + (1.0f - MOTO_MAG_FILTER_ALPHA) * mx_filtered; + my_filtered = MOTO_MAG_FILTER_ALPHA * my + (1.0f - MOTO_MAG_FILTER_ALPHA) * my_filtered; + mz_filtered = MOTO_MAG_FILTER_ALPHA * mz + (1.0f - MOTO_MAG_FILTER_ALPHA) * mz_filtered; + + // Préparation des données pour Fusion + FusionVector gyroscope = {gx, gy, gz}; + FusionVector accelerometer = {ax, ay, az}; + FusionVector magnetometer = {mx_filtered, my_filtered, mz_filtered}; + + // Mise à jour AHRS + FusionAhrsUpdate(&ahrs, gyroscope, accelerometer, magnetometer, dt); + + // Récupération des angles d'Euler + FusionEuler euler = FusionQuaternionToEuler(FusionAhrsGetQuaternion(&ahrs)); + float roll = euler.angle.roll; + float pitch = euler.angle.pitch; + float yaw = euler.angle.yaw; + + // Vérification de la phase d'initialisation + FusionAhrsFlags flags = FusionAhrsGetFlags(&ahrs); + moto_data.is_initializing = flags.initialising; + + // Mise à jour de l'état de la moto + Moto_UpdateState(&moto_data, roll, pitch, yaw, gx, gy, gz); + Moto_FilterAngles(&moto_data); + Moto_UpdateStats(&moto_stats, &moto_data, gx, gy, gz); + + // Mise à jour de l'affichage (toutes les 5 itérations = ~50ms) + display_update_counter++; + if (display_update_counter >= 5) { + char buffer[21]; + + for (int line = 0; line < 4; line++) { + Moto_FormatDisplay(&moto_data, line, buffer); + lcd_set_cursor(line, 0); + lcd_print(buffer); + } + + display_update_counter = 0; + } + + // LED d'état + switch (moto_data.state) { + case MOTO_STATE_NORMAL: + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_RESET); + break; + case MOTO_STATE_WARNING: + case MOTO_STATE_RAPID_TURN: + // Clignotement lent + if ((current_time / 500) % 2) { + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_SET); + } else { + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_RESET); + } + break; + case MOTO_STATE_DANGER: + case MOTO_STATE_POSSIBLE_CRASH: + // Clignotement rapide + if ((current_time / 100) % 2) { + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_SET); + } else { + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_RESET); + } + break; + default: + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_SET); + break; + } + + // Debug UART (toutes les 50 itérations = ~500ms) + static uint32_t uart_counter = 0; + uart_counter++; + if (uart_counter >= 50) { + FusionAhrsInternalStates states = FusionAhrsGetInternalStates(&ahrs); + + printf("R:%.1f P:%.1f Y:%.1f | St:%s | AE:%.1f ME:%.1f | AI:%d MI:%d | Smp:%lu\r\n", + roll, pitch, yaw, + Moto_GetStateString(moto_data.state), + states.accelerationError, states.magneticError, + states.accelerometerIgnored, states.magnetometerIgnored, + moto_stats.total_samples); + + uart_counter = 0; + } + + // Mise à jour du timestamp + moto_data.last_update_time = current_time; + last_time = current_time; + } + + // Petite pause pour éviter la surcharge du processeur + HAL_Delay(20); + } +} + +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + + /** Configure the main internal regulator output voltage + */ + if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK) + { + Error_Handler(); + } + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = 64; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLM = 1; + RCC_OscInitStruct.PLL.PLLN = 10; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7; + RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) + { + Error_Handler(); + } +} + +static void MX_I2C1_Init(void) +{ + hi2c1.Instance = I2C1; + hi2c1.Init.Timing = 0x10D19CE4; + hi2c1.Init.OwnAddress1 = 0; + hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; + hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; + hi2c1.Init.OwnAddress2 = 0; + hi2c1.Init.OwnAddress2Masks = I2C_OA2_NOMASK; + hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; + hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE; + if (HAL_I2C_Init(&hi2c1) != HAL_OK) + { + Error_Handler(); + } + + if (HAL_I2CEx_ConfigAnalogFilter(&hi2c1, I2C_ANALOGFILTER_ENABLE) != HAL_OK) + { + Error_Handler(); + } + + if (HAL_I2CEx_ConfigDigitalFilter(&hi2c1, 0) != HAL_OK) + { + Error_Handler(); + } +} + +static void MX_USART2_UART_Init(void) +{ + huart2.Instance = USART2; + huart2.Init.BaudRate = 115200; + huart2.Init.WordLength = UART_WORDLENGTH_8B; + huart2.Init.StopBits = UART_STOPBITS_1; + huart2.Init.Parity = UART_PARITY_NONE; + huart2.Init.Mode = UART_MODE_TX_RX; + huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart2.Init.OverSampling = UART_OVERSAMPLING_16; + huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart2) != HAL_OK) + { + Error_Handler(); + } +} + +static void MX_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOA, SMPS_EN_Pin|SMPS_V1_Pin|SMPS_SW_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin : B1_Pin */ + GPIO_InitStruct.Pin = B1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pins : SMPS_EN_Pin SMPS_V1_Pin SMPS_SW_Pin */ + GPIO_InitStruct.Pin = SMPS_EN_Pin|SMPS_V1_Pin|SMPS_SW_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /*Configure GPIO pin : SMPS_PG_Pin */ + GPIO_InitStruct.Pin = SMPS_PG_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLUP; + HAL_GPIO_Init(SMPS_PG_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : LD4_Pin */ + GPIO_InitStruct.Pin = LD4_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(LD4_GPIO_Port, &GPIO_InitStruct); +} + +void Error_Handler(void) +{ + __disable_irq(); + while (1) + { + } +} + +#ifdef USE_FULL_ASSERT +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ diff --git a/Core/Src/moto_config.c b/Core/Src/moto_config.c new file mode 100644 index 0000000..6fb2551 --- /dev/null +++ b/Core/Src/moto_config.c @@ -0,0 +1,196 @@ +/** + * @file moto_config.c + * @brief Implémentation des fonctions utilitaires pour système IMU moto + */ + +#include "moto_config.h" +#include +#include +#include + +//------------------------------------------------------------------------------ +// Fonctions publiques +//------------------------------------------------------------------------------ + +void Moto_InitData(MotoData_t *data) { + memset(data, 0, sizeof(MotoData_t)); + data->state = MOTO_STATE_NORMAL; + data->is_initializing = true; + data->last_update_time = 0; +} + +void Moto_UpdateState(MotoData_t *data, float roll, float pitch, float yaw, + float gyro_x, float gyro_y, float gyro_z) { + + // Mise à jour des angles bruts + data->roll = roll; + data->pitch = pitch; + data->yaw = yaw; + + // Calcul de la magnitude de la vitesse angulaire + float gyro_magnitude = sqrtf(gyro_x*gyro_x + gyro_y*gyro_y + gyro_z*gyro_z); + + // Détection d'état prioritaire : crash possible + if (Moto_DetectCrash(data, gyro_magnitude)) { + data->state = MOTO_STATE_POSSIBLE_CRASH; + return; + } + + // Détection de wheelie/stoppie + if (pitch > MOTO_PITCH_WHEELIE_THRESHOLD) { + data->state = MOTO_STATE_WHEELIE; + } else if (pitch < MOTO_PITCH_STOPPIE_THRESHOLD) { + data->state = MOTO_STATE_STOPPIE; + } + // Détection de virage rapide + else if (fabsf(gyro_z) > MOTO_GYRO_RAPID_TURN_THRESHOLD) { + data->state = MOTO_STATE_RAPID_TURN; + } + // Détection d'inclinaison dangereuse + else if (fabsf(roll) > MOTO_ROLL_DANGER_THRESHOLD) { + data->state = MOTO_STATE_DANGER; + } + // Détection d'inclinaison d'avertissement + else if (fabsf(roll) > MOTO_ROLL_WARNING_THRESHOLD) { + data->state = MOTO_STATE_WARNING; + } + // État normal + else { + data->state = MOTO_STATE_NORMAL; + data->crash_detect_counter = 0; // Reset compteur crash + } +} + +void Moto_FilterAngles(MotoData_t *data) { + // Filtre passe-bas simple pour lisser l'affichage + data->roll_filtered = MOTO_ANGLE_FILTER_ALPHA * data->roll + + (1.0f - MOTO_ANGLE_FILTER_ALPHA) * data->roll_filtered; + + data->pitch_filtered = MOTO_ANGLE_FILTER_ALPHA * data->pitch + + (1.0f - MOTO_ANGLE_FILTER_ALPHA) * data->pitch_filtered; + + data->yaw_filtered = MOTO_ANGLE_FILTER_ALPHA * data->yaw + + (1.0f - MOTO_ANGLE_FILTER_ALPHA) * data->yaw_filtered; +} + +const char* Moto_GetStateString(MotoState_t state) { + switch (state) { + case MOTO_STATE_NORMAL: return "NORMAL"; + case MOTO_STATE_WARNING: return "ATTENTION"; + case MOTO_STATE_DANGER: return "DANGER"; + case MOTO_STATE_WHEELIE: return "WHEELIE"; + case MOTO_STATE_STOPPIE: return "STOPPIE"; + case MOTO_STATE_RAPID_TURN: return "VIRAGE RAPIDE"; + case MOTO_STATE_POSSIBLE_CRASH: return "CHUTE POSSIBLE"; + default: return "INCONNU"; + } +} + +void Moto_UpdateStats(MotoStats_t *stats, const MotoData_t *data, + float gyro_x, float gyro_y, float gyro_z) { + + stats->total_samples++; + + // Mise à jour des extremums d'angles + if (data->roll > stats->max_roll) stats->max_roll = data->roll; + if (data->roll < stats->min_roll) stats->min_roll = data->roll; + if (data->pitch > stats->max_pitch) stats->max_pitch = data->pitch; + if (data->pitch < stats->min_pitch) stats->min_pitch = data->pitch; + + // Mise à jour des extremums de vitesse angulaire + if (fabsf(gyro_x) > stats->max_gyro_x) stats->max_gyro_x = fabsf(gyro_x); + if (fabsf(gyro_y) > stats->max_gyro_y) stats->max_gyro_y = fabsf(gyro_y); + if (fabsf(gyro_z) > stats->max_gyro_z) stats->max_gyro_z = fabsf(gyro_z); + + // Comptage des états d'alerte + if (data->state == MOTO_STATE_WARNING) stats->warning_count++; + if (data->state == MOTO_STATE_DANGER || + data->state == MOTO_STATE_POSSIBLE_CRASH) stats->danger_count++; +} + +void Moto_CalibrateMagnetometer(float *mx, float *my, float *mz) { + // Application des offsets et facteurs d'échelle + *mx = (*mx - MOTO_MAG_OFFSET_X) * MOTO_MAG_SCALE_X; + *my = (*my - MOTO_MAG_OFFSET_Y) * MOTO_MAG_SCALE_Y; + *mz = (*mz - MOTO_MAG_OFFSET_Z) * MOTO_MAG_SCALE_Z; +} + +bool Moto_DetectCrash(MotoData_t *data, float gyro_magnitude) { + if (gyro_magnitude > MOTO_GYRO_CRASH_THRESHOLD) { + data->crash_detect_counter++; + + // Confirme la chute si seuil dépassé pendant plusieurs échantillons + if (data->crash_detect_counter > 5) { // ~50ms à 100Hz + return true; + } + } else { + // Décrémente progressivement le compteur + if (data->crash_detect_counter > 0) { + data->crash_detect_counter--; + } + } + + return false; +} + +void Moto_FormatDisplay(const MotoData_t *data, int line, char *buffer) { + switch (line) { + case 0: + snprintf(buffer, 21, "R:%5.1f P:%5.1f", + data->roll_filtered, data->pitch_filtered); + break; + + case 1: + snprintf(buffer, 21, "Yaw: %6.1f deg", data->yaw_filtered); + break; + + case 2: + snprintf(buffer, 21, "Etat: %s", Moto_GetStateString(data->state)); + break; + + case 3: + if (data->is_initializing) { + snprintf(buffer, 21, "--- INIT EN COURS ---"); + } else { + switch (data->state) { + case MOTO_STATE_NORMAL: + snprintf(buffer, 21, "--- EQUILIBRE ---"); + break; + case MOTO_STATE_WARNING: + if (data->roll > 0) { + snprintf(buffer, 21, "INCLIN. DROITE >>>"); + } else { + snprintf(buffer, 21, "<<< INCLIN. GAUCHE"); + } + break; + case MOTO_STATE_DANGER: + case MOTO_STATE_POSSIBLE_CRASH: + snprintf(buffer, 21, "!!! ATTENTION !!!"); + break; + case MOTO_STATE_WHEELIE: + snprintf(buffer, 21, "^^^ WHEELIE ^^^"); + break; + case MOTO_STATE_STOPPIE: + snprintf(buffer, 21, "vvv STOPPIE vvv"); + break; + case MOTO_STATE_RAPID_TURN: + snprintf(buffer, 21, ">>> VIRAGE <<<"); + break; + default: + snprintf(buffer, 21, "--- INCONNU ---"); + break; + } + } + break; + + default: + snprintf(buffer, 21, "Ligne invalide"); + break; + } +} + +//------------------------------------------------------------------------------ +// Fonctions utilitaires privées +//------------------------------------------------------------------------------ + +// Ajouter ici d'autres fonctions utilitaires si nécessaire diff --git a/Core/Src/stm32l4xx_hal_msp.c b/Core/Src/stm32l4xx_hal_msp.c new file mode 100644 index 0000000..de2c118 --- /dev/null +++ b/Core/Src/stm32l4xx_hal_msp.c @@ -0,0 +1,237 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32l4xx_hal_msp.c + * @brief This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/** + * @brief I2C MSP Initialization + * This function configures the hardware resources used in this example + * @param hi2c: I2C handle pointer + * @retval None + */ +void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + if(hi2c->Instance==I2C1) + { + /* USER CODE BEGIN I2C1_MspInit 0 */ + + /* USER CODE END I2C1_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_I2C1; + PeriphClkInit.I2c1ClockSelection = RCC_I2C1CLKSOURCE_PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } + + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**I2C1 GPIO Configuration + PB8 ------> I2C1_SCL + PB9 ------> I2C1_SDA + */ + GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF4_I2C1; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* Peripheral clock enable */ + __HAL_RCC_I2C1_CLK_ENABLE(); + /* USER CODE BEGIN I2C1_MspInit 1 */ + + /* USER CODE END I2C1_MspInit 1 */ + + } + +} + +/** + * @brief I2C MSP De-Initialization + * This function freeze the hardware resources used in this example + * @param hi2c: I2C handle pointer + * @retval None + */ +void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c) +{ + if(hi2c->Instance==I2C1) + { + /* USER CODE BEGIN I2C1_MspDeInit 0 */ + + /* USER CODE END I2C1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_I2C1_CLK_DISABLE(); + + /**I2C1 GPIO Configuration + PB8 ------> I2C1_SCL + PB9 ------> I2C1_SDA + */ + HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8); + + HAL_GPIO_DeInit(GPIOB, GPIO_PIN_9); + + /* USER CODE BEGIN I2C1_MspDeInit 1 */ + + /* USER CODE END I2C1_MspDeInit 1 */ + } + +} + +/** + * @brief UART MSP Initialization + * This function configures the hardware resources used in this example + * @param huart: UART handle pointer + * @retval None + */ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + if(huart->Instance==USART2) + { + /* USER CODE BEGIN USART2_MspInit 0 */ + + /* USER CODE END USART2_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2; + PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } + + /* Peripheral clock enable */ + __HAL_RCC_USART2_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + GPIO_InitStruct.Pin = USART_TX_Pin|USART_RX_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF7_USART2; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN USART2_MspInit 1 */ + + /* USER CODE END USART2_MspInit 1 */ + + } + +} + +/** + * @brief UART MSP De-Initialization + * This function freeze the hardware resources used in this example + * @param huart: UART handle pointer + * @retval None + */ +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if(huart->Instance==USART2) + { + /* USER CODE BEGIN USART2_MspDeInit 0 */ + + /* USER CODE END USART2_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART2_CLK_DISABLE(); + + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + HAL_GPIO_DeInit(GPIOA, USART_TX_Pin|USART_RX_Pin); + + /* USER CODE BEGIN USART2_MspDeInit 1 */ + + /* USER CODE END USART2_MspDeInit 1 */ + } + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/Core/Src/stm32l4xx_it.c b/Core/Src/stm32l4xx_it.c new file mode 100644 index 0000000..e5f6b96 --- /dev/null +++ b/Core/Src/stm32l4xx_it.c @@ -0,0 +1,203 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32l4xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32l4xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ + +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex-M4 Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + { + } + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } +} + +/** + * @brief This function handles Prefetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVCall_IRQn 0 */ + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32L4xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32l4xx.s). */ +/******************************************************************************/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/Core/Src/syscalls.c b/Core/Src/syscalls.c new file mode 100644 index 0000000..8884b5a --- /dev/null +++ b/Core/Src/syscalls.c @@ -0,0 +1,176 @@ +/** + ****************************************************************************** + * @file syscalls.c + * @author Auto-generated by STM32CubeIDE + * @brief STM32CubeIDE Minimal System calls file + * + * For more information about which c-functions + * need which of these lowlevel functions + * please consult the Newlib libc-manual + ****************************************************************************** + * @attention + * + * Copyright (c) 2020-2025 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes */ +#include +#include +#include +#include +#include +#include +#include +#include + + +/* Variables */ +extern int __io_putchar(int ch) __attribute__((weak)); +extern int __io_getchar(void) __attribute__((weak)); + + +char *__env[1] = { 0 }; +char **environ = __env; + + +/* Functions */ +void initialise_monitor_handles() +{ +} + +int _getpid(void) +{ + return 1; +} + +int _kill(int pid, int sig) +{ + (void)pid; + (void)sig; + errno = EINVAL; + return -1; +} + +void _exit (int status) +{ + _kill(status, -1); + while (1) {} /* Make sure we hang here */ +} + +__attribute__((weak)) int _read(int file, char *ptr, int len) +{ + (void)file; + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + *ptr++ = __io_getchar(); + } + + return len; +} + +__attribute__((weak)) int _write(int file, char *ptr, int len) +{ + (void)file; + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + __io_putchar(*ptr++); + } + return len; +} + +int _close(int file) +{ + (void)file; + return -1; +} + + +int _fstat(int file, struct stat *st) +{ + (void)file; + st->st_mode = S_IFCHR; + return 0; +} + +int _isatty(int file) +{ + (void)file; + return 1; +} + +int _lseek(int file, int ptr, int dir) +{ + (void)file; + (void)ptr; + (void)dir; + return 0; +} + +int _open(char *path, int flags, ...) +{ + (void)path; + (void)flags; + /* Pretend like we always fail */ + return -1; +} + +int _wait(int *status) +{ + (void)status; + errno = ECHILD; + return -1; +} + +int _unlink(char *name) +{ + (void)name; + errno = ENOENT; + return -1; +} + +int _times(struct tms *buf) +{ + (void)buf; + return -1; +} + +int _stat(char *file, struct stat *st) +{ + (void)file; + st->st_mode = S_IFCHR; + return 0; +} + +int _link(char *old, char *new) +{ + (void)old; + (void)new; + errno = EMLINK; + return -1; +} + +int _fork(void) +{ + errno = EAGAIN; + return -1; +} + +int _execve(char *name, char **argv, char **env) +{ + (void)name; + (void)argv; + (void)env; + errno = ENOMEM; + return -1; +} diff --git a/Core/Src/sysmem.c b/Core/Src/sysmem.c new file mode 100644 index 0000000..5d9f7e6 --- /dev/null +++ b/Core/Src/sysmem.c @@ -0,0 +1,79 @@ +/** + ****************************************************************************** + * @file sysmem.c + * @author Generated by STM32CubeIDE + * @brief STM32CubeIDE System Memory calls file + * + * For more information about which C functions + * need which of these lowlevel functions + * please consult the newlib libc manual + ****************************************************************************** + * @attention + * + * Copyright (c) 2025 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes */ +#include +#include + +/** + * Pointer to the current high watermark of the heap usage + */ +static uint8_t *__sbrk_heap_end = NULL; + +/** + * @brief _sbrk() allocates memory to the newlib heap and is used by malloc + * and others from the C library + * + * @verbatim + * ############################################################################ + * # .data # .bss # newlib heap # MSP stack # + * # # # # Reserved by _Min_Stack_Size # + * ############################################################################ + * ^-- RAM start ^-- _end _estack, RAM end --^ + * @endverbatim + * + * This implementation starts allocating at the '_end' linker symbol + * The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack + * The implementation considers '_estack' linker symbol to be RAM end + * NOTE: If the MSP stack, at any point during execution, grows larger than the + * reserved size, please increase the '_Min_Stack_Size'. + * + * @param incr Memory size + * @return Pointer to allocated memory + */ +void *_sbrk(ptrdiff_t incr) +{ + extern uint8_t _end; /* Symbol defined in the linker script */ + extern uint8_t _estack; /* Symbol defined in the linker script */ + extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */ + const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size; + const uint8_t *max_heap = (uint8_t *)stack_limit; + uint8_t *prev_heap_end; + + /* Initialize heap end at first call */ + if (NULL == __sbrk_heap_end) + { + __sbrk_heap_end = &_end; + } + + /* Protect heap from growing into the reserved MSP stack */ + if (__sbrk_heap_end + incr > max_heap) + { + errno = ENOMEM; + return (void *)-1; + } + + prev_heap_end = __sbrk_heap_end; + __sbrk_heap_end += incr; + + return (void *)prev_heap_end; +} diff --git a/Core/Src/system_stm32l4xx.c b/Core/Src/system_stm32l4xx.c new file mode 100644 index 0000000..be9cfee --- /dev/null +++ b/Core/Src/system_stm32l4xx.c @@ -0,0 +1,332 @@ +/** + ****************************************************************************** + * @file system_stm32l4xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32l4xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * After each device reset the MSI (4 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32l4xx.s" file, to + * configure the system clock before to branch to main program. + * + * This file configures the system clock as follows: + *============================================================================= + *----------------------------------------------------------------------------- + * System Clock source | MSI + *----------------------------------------------------------------------------- + * SYSCLK(Hz) | 4000000 + *----------------------------------------------------------------------------- + * HCLK(Hz) | 4000000 + *----------------------------------------------------------------------------- + * AHB Prescaler | 1 + *----------------------------------------------------------------------------- + * APB1 Prescaler | 1 + *----------------------------------------------------------------------------- + * APB2 Prescaler | 1 + *----------------------------------------------------------------------------- + * PLL_M | 1 + *----------------------------------------------------------------------------- + * PLL_N | 8 + *----------------------------------------------------------------------------- + * PLL_P | 7 + *----------------------------------------------------------------------------- + * PLL_Q | 2 + *----------------------------------------------------------------------------- + * PLL_R | 2 + *----------------------------------------------------------------------------- + * PLLSAI1_P | NA + *----------------------------------------------------------------------------- + * PLLSAI1_Q | NA + *----------------------------------------------------------------------------- + * PLLSAI1_R | NA + *----------------------------------------------------------------------------- + * PLLSAI2_P | NA + *----------------------------------------------------------------------------- + * PLLSAI2_Q | NA + *----------------------------------------------------------------------------- + * PLLSAI2_R | NA + *----------------------------------------------------------------------------- + * Require 48MHz for USB OTG FS, | Disabled + * SDIO and RNG clock | + *----------------------------------------------------------------------------- + *============================================================================= + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l4xx_system + * @{ + */ + +/** @addtogroup STM32L4xx_System_Private_Includes + * @{ + */ + +#include "stm32l4xx.h" + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Defines + * @{ + */ + +#if !defined (HSE_VALUE) + #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (MSI_VALUE) + #define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/* Note: Following vector table addresses must be defined in line with linker + configuration. */ +/*!< Uncomment the following line if you need to relocate the vector table + anywhere in Flash or Sram, else the vector table is kept at the automatic + remap of boot address selected */ +/* #define USER_VECT_TAB_ADDRESS */ + +#if defined(USER_VECT_TAB_ADDRESS) +/*!< Uncomment the following line if you need to relocate your vector Table + in Sram else user remap will be done in Flash. */ +/* #define VECT_TAB_SRAM */ + +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS SRAM1_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x200. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x200. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +#endif /* VECT_TAB_SRAM */ +#endif /* USER_VECT_TAB_ADDRESS */ + +/******************************************************************************/ +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 4000000U; + + const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U}; + const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U}; + const uint32_t MSIRangeTable[12] = {100000U, 200000U, 400000U, 800000U, 1000000U, 2000000U, \ + 4000000U, 8000000U, 16000000U, 24000000U, 32000000U, 48000000U}; +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L4xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * @retval None + */ + +void SystemInit(void) +{ +#if defined(USER_VECT_TAB_ADDRESS) + /* Configure the Vector Table location -------------------------------------*/ + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; +#endif + + /* FPU settings ------------------------------------------------------------*/ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 20U)|(3UL << 22U)); /* set CP10 and CP11 Full Access */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*) + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***) + * or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) MSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSI_VALUE is a constant defined in stm32l4xx_hal.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***) HSE_VALUE is a constant defined in stm32l4xx_hal.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp, msirange, pllvco, pllsource, pllm, pllr; + + /* Get MSI Range frequency--------------------------------------------------*/ + if ((RCC->CR & RCC_CR_MSIRGSEL) == 0U) + { /* MSISRANGE from RCC_CSR applies */ + msirange = (RCC->CSR & RCC_CSR_MSISRANGE) >> 8U; + } + else + { /* MSIRANGE from RCC_CR applies */ + msirange = (RCC->CR & RCC_CR_MSIRANGE) >> 4U; + } + /*MSI frequency range in HZ*/ + msirange = MSIRangeTable[msirange]; + + /* Get SYSCLK source -------------------------------------------------------*/ + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case 0x00: /* MSI used as system clock source */ + SystemCoreClock = msirange; + break; + + case 0x04: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + + case 0x08: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + + case 0x0C: /* PLL used as system clock source */ + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC); + pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> 4U) + 1U ; + + switch (pllsource) + { + case 0x02: /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm); + break; + + case 0x03: /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm); + break; + + default: /* MSI used as PLL clock source */ + pllvco = (msirange / pllm); + break; + } + pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 8U); + pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 25U) + 1U) * 2U; + SystemCoreClock = pllvco/pllr; + break; + + default: + SystemCoreClock = msirange; + break; + } + /* Compute HCLK clock frequency --------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Core/Startup/startup_stm32l452retxp.s b/Core/Startup/startup_stm32l452retxp.s new file mode 100644 index 0000000..6447a0d --- /dev/null +++ b/Core/Startup/startup_stm32l452retxp.s @@ -0,0 +1,478 @@ +/** + ****************************************************************************** + * @file startup_stm32l452xx.s + * @author MCD Application Team + * @brief STM32L452xx devices vector table for GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address, + * - Configure the clock system + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF1E0F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* Set stack pointer */ + +/* Call the clock system initialization function.*/ + bl SystemInit + +/* Copy the data segment initializers from flash to SRAM */ + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + +/* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + +FillZerobss: + str r3, [r2] + adds r2, r2, #4 + +LoopFillZerobss: + cmp r2, r4 + bcc FillZerobss + +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex-M4. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_PVM_IRQHandler + .word TAMP_STAMP_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_IRQHandler + .word CAN1_TX_IRQHandler + .word CAN1_RX0_IRQHandler + .word CAN1_RX1_IRQHandler + .word CAN1_SCE_IRQHandler + .word EXTI9_5_IRQHandler + .word TIM1_BRK_TIM15_IRQHandler + .word TIM1_UP_TIM16_IRQHandler + .word TIM1_TRG_COM_IRQHandler + .word TIM1_CC_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word 0 + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word I2C2_EV_IRQHandler + .word I2C2_ER_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SDMMC1_IRQHandler + .word 0 + .word SPI3_IRQHandler + .word UART4_IRQHandler + .word 0 + .word TIM6_DAC_IRQHandler + .word 0 + .word DMA2_Channel1_IRQHandler + .word DMA2_Channel2_IRQHandler + .word DMA2_Channel3_IRQHandler + .word DMA2_Channel4_IRQHandler + .word DMA2_Channel5_IRQHandler + .word DFSDM1_FLT0_IRQHandler + .word DFSDM1_FLT1_IRQHandler + .word 0 + .word COMP_IRQHandler + .word LPTIM1_IRQHandler + .word LPTIM2_IRQHandler + .word USB_IRQHandler + .word DMA2_Channel6_IRQHandler + .word DMA2_Channel7_IRQHandler + .word LPUART1_IRQHandler + .word QUADSPI_IRQHandler + .word I2C3_EV_IRQHandler + .word I2C3_ER_IRQHandler + .word SAI1_IRQHandler + .word 0 + .word 0 + .word TSC_IRQHandler + .word 0 + .word 0 + .word RNG_IRQHandler + .word FPU_IRQHandler + .word CRS_IRQHandler + .word I2C4_EV_IRQHandler + .word I2C4_ER_IRQHandler + + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_PVM_IRQHandler + .thumb_set PVD_PVM_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM15_IRQHandler + .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM16_IRQHandler + .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_IRQHandler + .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak SDMMC1_IRQHandler + .thumb_set SDMMC1_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak DMA2_Channel1_IRQHandler + .thumb_set DMA2_Channel1_IRQHandler,Default_Handler + + .weak DMA2_Channel2_IRQHandler + .thumb_set DMA2_Channel2_IRQHandler,Default_Handler + + .weak DMA2_Channel3_IRQHandler + .thumb_set DMA2_Channel3_IRQHandler,Default_Handler + + .weak DMA2_Channel4_IRQHandler + .thumb_set DMA2_Channel4_IRQHandler,Default_Handler + + .weak DMA2_Channel5_IRQHandler + .thumb_set DMA2_Channel5_IRQHandler,Default_Handler + + .weak DFSDM1_FLT0_IRQHandler + .thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler + + .weak DFSDM1_FLT1_IRQHandler + .thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler + + .weak COMP_IRQHandler + .thumb_set COMP_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak LPTIM2_IRQHandler + .thumb_set LPTIM2_IRQHandler,Default_Handler + + .weak USB_IRQHandler + .thumb_set USB_IRQHandler,Default_Handler + + .weak DMA2_Channel6_IRQHandler + .thumb_set DMA2_Channel6_IRQHandler,Default_Handler + + .weak DMA2_Channel7_IRQHandler + .thumb_set DMA2_Channel7_IRQHandler,Default_Handler + + .weak LPUART1_IRQHandler + .thumb_set LPUART1_IRQHandler,Default_Handler + + .weak QUADSPI_IRQHandler + .thumb_set QUADSPI_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak SAI1_IRQHandler + .thumb_set SAI1_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak CRS_IRQHandler + .thumb_set CRS_IRQHandler,Default_Handler + + .weak I2C4_EV_IRQHandler + .thumb_set I2C4_EV_IRQHandler,Default_Handler + + .weak I2C4_ER_IRQHandler + .thumb_set I2C4_ER_IRQHandler,Default_Handler + diff --git a/Debug/Core/Src/FusionAhrs.cyclo b/Debug/Core/Src/FusionAhrs.cyclo new file mode 100644 index 0000000..5ae7cc6 --- /dev/null +++ b/Debug/Core/Src/FusionAhrs.cyclo @@ -0,0 +1,37 @@ +../Core/Inc/FusionMath.h:127:21:FusionDegreesToRadians 1 +../Core/Inc/FusionMath.h:136:21:FusionRadiansToDegrees 1 +../Core/Inc/FusionMath.h:148:21:FusionAsin 3 +../Core/Inc/FusionMath.h:169:21:FusionFastInverseSqrt 1 +../Core/Inc/FusionMath.h:191:20:FusionVectorIsZero 4 +../Core/Inc/FusionMath.h:201:28:FusionVectorAdd 1 +../Core/Inc/FusionMath.h:216:28:FusionVectorSubtract 1 +../Core/Inc/FusionMath.h:230:21:FusionVectorSum 1 +../Core/Inc/FusionMath.h:240:28:FusionVectorMultiplyScalar 1 +../Core/Inc/FusionMath.h:255:28:FusionVectorHadamardProduct 1 +../Core/Inc/FusionMath.h:270:28:FusionVectorCrossProduct 1 +../Core/Inc/FusionMath.h:289:21:FusionVectorDotProduct 1 +../Core/Inc/FusionMath.h:298:21:FusionVectorMagnitudeSquared 1 +../Core/Inc/FusionMath.h:307:21:FusionVectorMagnitude 1 +../Core/Inc/FusionMath.h:316:28:FusionVectorNormalise 1 +../Core/Inc/FusionMath.h:334:32:FusionQuaternionAdd 1 +../Core/Inc/FusionMath.h:350:32:FusionQuaternionMultiply 1 +../Core/Inc/FusionMath.h:373:32:FusionQuaternionMultiplyVector 1 +../Core/Inc/FusionMath.h:392:32:FusionQuaternionNormalise 1 +../Core/Src/FusionAhrs.c:46:6:FusionAhrsInitialise 1 +../Core/Src/FusionAhrs.c:64:6:FusionAhrsReset 1 +../Core/Src/FusionAhrs.c:85:6:FusionAhrsSetSettings 7 +../Core/Src/FusionAhrs.c:113:6:FusionAhrsUpdate 17 +../Core/Src/FusionAhrs.c:224:28:HalfGravity 4 +../Core/Src/FusionAhrs.c:254:28:HalfMagnetic 5 +../Core/Src/FusionAhrs.c:292:28:Feedback 2 +../Core/Src/FusionAhrs.c:306:19:Clamp 3 +../Core/Src/FusionAhrs.c:324:6:FusionAhrsUpdateNoMagnetometer 2 +../Core/Src/FusionAhrs.c:344:6:FusionAhrsUpdateExternalHeading 1 +../Core/Src/FusionAhrs.c:369:18:FusionAhrsGetQuaternion 1 +../Core/Src/FusionAhrs.c:378:6:FusionAhrsSetQuaternion 1 +../Core/Src/FusionAhrs.c:387:14:FusionAhrsGetGravity 1 +../Core/Src/FusionAhrs.c:404:14:FusionAhrsGetLinearAcceleration 4 +../Core/Src/FusionAhrs.c:423:14:FusionAhrsGetEarthAcceleration 4 +../Core/Src/FusionAhrs.c:461:26:FusionAhrsGetInternalStates 3 +../Core/Src/FusionAhrs.c:478:17:FusionAhrsGetFlags 1 +../Core/Src/FusionAhrs.c:495:6:FusionAhrsSetHeading 1 diff --git a/Debug/Core/Src/FusionAhrs.d b/Debug/Core/Src/FusionAhrs.d new file mode 100644 index 0000000..8a42b6f --- /dev/null +++ b/Debug/Core/Src/FusionAhrs.d @@ -0,0 +1,5 @@ +Core/Src/FusionAhrs.o: ../Core/Src/FusionAhrs.c ../Core/Inc/FusionAhrs.h \ + ../Core/Inc/FusionConvention.h ../Core/Inc/FusionMath.h +../Core/Inc/FusionAhrs.h: +../Core/Inc/FusionConvention.h: +../Core/Inc/FusionMath.h: diff --git a/Debug/Core/Src/FusionAhrs.o b/Debug/Core/Src/FusionAhrs.o new file mode 100644 index 0000000..d646cf6 Binary files /dev/null and b/Debug/Core/Src/FusionAhrs.o differ diff --git a/Debug/Core/Src/FusionAhrs.su b/Debug/Core/Src/FusionAhrs.su new file mode 100644 index 0000000..241b6e0 --- /dev/null +++ b/Debug/Core/Src/FusionAhrs.su @@ -0,0 +1,37 @@ +../Core/Inc/FusionMath.h:127:21:FusionDegreesToRadians 16 static +../Core/Inc/FusionMath.h:136:21:FusionRadiansToDegrees 16 static +../Core/Inc/FusionMath.h:148:21:FusionAsin 16 static +../Core/Inc/FusionMath.h:169:21:FusionFastInverseSqrt 24 static +../Core/Inc/FusionMath.h:191:20:FusionVectorIsZero 24 static +../Core/Inc/FusionMath.h:201:28:FusionVectorAdd 72 static +../Core/Inc/FusionMath.h:216:28:FusionVectorSubtract 72 static +../Core/Inc/FusionMath.h:230:21:FusionVectorSum 24 static +../Core/Inc/FusionMath.h:240:28:FusionVectorMultiplyScalar 64 static +../Core/Inc/FusionMath.h:255:28:FusionVectorHadamardProduct 72 static +../Core/Inc/FusionMath.h:270:28:FusionVectorCrossProduct 72 static +../Core/Inc/FusionMath.h:289:21:FusionVectorDotProduct 48 static +../Core/Inc/FusionMath.h:298:21:FusionVectorMagnitudeSquared 40 static +../Core/Inc/FusionMath.h:307:21:FusionVectorMagnitude 24 static +../Core/Inc/FusionMath.h:316:28:FusionVectorNormalise 56 static +../Core/Inc/FusionMath.h:334:32:FusionQuaternionAdd 88 static +../Core/Inc/FusionMath.h:350:32:FusionQuaternionMultiply 88 static +../Core/Inc/FusionMath.h:373:32:FusionQuaternionMultiplyVector 88 static +../Core/Inc/FusionMath.h:392:32:FusionQuaternionNormalise 88 static +../Core/Src/FusionAhrs.c:46:6:FusionAhrsInitialise 48 static +../Core/Src/FusionAhrs.c:64:6:FusionAhrsReset 72 static +../Core/Src/FusionAhrs.c:85:6:FusionAhrsSetSettings 16 static +../Core/Src/FusionAhrs.c:113:6:FusionAhrsUpdate 264 static +../Core/Src/FusionAhrs.c:224:28:HalfGravity 80 static +../Core/Src/FusionAhrs.c:254:28:HalfMagnetic 96 static +../Core/Src/FusionAhrs.c:292:28:Feedback 72 static +../Core/Src/FusionAhrs.c:306:19:Clamp 24 static +../Core/Src/FusionAhrs.c:324:6:FusionAhrsUpdateNoMagnetometer 56 static +../Core/Src/FusionAhrs.c:344:6:FusionAhrsUpdateExternalHeading 72 static +../Core/Src/FusionAhrs.c:369:18:FusionAhrsGetQuaternion 48 static +../Core/Src/FusionAhrs.c:378:6:FusionAhrsSetQuaternion 32 static +../Core/Src/FusionAhrs.c:387:14:FusionAhrsGetGravity 56 static +../Core/Src/FusionAhrs.c:404:14:FusionAhrsGetLinearAcceleration 80 static +../Core/Src/FusionAhrs.c:423:14:FusionAhrsGetEarthAcceleration 88 static +../Core/Src/FusionAhrs.c:461:26:FusionAhrsGetInternalStates 48 static +../Core/Src/FusionAhrs.c:478:17:FusionAhrsGetFlags 24 static +../Core/Src/FusionAhrs.c:495:6:FusionAhrsSetHeading 48 static diff --git a/Debug/Core/Src/icm20948.cyclo b/Debug/Core/Src/icm20948.cyclo new file mode 100644 index 0000000..949211a --- /dev/null +++ b/Debug/Core/Src/icm20948.cyclo @@ -0,0 +1,8 @@ +../Core/Src/icm20948.c:6:9:read_register 1 +../Core/Src/icm20948.c:12:6:write_register 1 +../Core/Src/icm20948.c:16:6:icm20948_select_bank 1 +../Core/Src/icm20948.c:20:6:icm20948_init 1 +../Core/Src/icm20948.c:33:6:icm20948_read_accel 1 +../Core/Src/icm20948.c:48:6:icm20948_read_gyro 1 +../Core/Src/icm20948.c:62:6:icm20948_mag_init 1 +../Core/Src/icm20948.c:72:6:icm20948_read_mag 1 diff --git a/Debug/Core/Src/icm20948.d b/Debug/Core/Src/icm20948.d new file mode 100644 index 0000000..a05122e --- /dev/null +++ b/Debug/Core/Src/icm20948.d @@ -0,0 +1,58 @@ +Core/Src/icm20948.o: ../Core/Src/icm20948.c ../Core/Inc/icm20948.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Core/Inc/icm20948.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Core/Src/icm20948.o b/Debug/Core/Src/icm20948.o new file mode 100644 index 0000000..066ffb3 Binary files /dev/null and b/Debug/Core/Src/icm20948.o differ diff --git a/Debug/Core/Src/icm20948.su b/Debug/Core/Src/icm20948.su new file mode 100644 index 0000000..633db7d --- /dev/null +++ b/Debug/Core/Src/icm20948.su @@ -0,0 +1,8 @@ +../Core/Src/icm20948.c:6:9:read_register 40 static +../Core/Src/icm20948.c:12:6:write_register 32 static +../Core/Src/icm20948.c:16:6:icm20948_select_bank 16 static +../Core/Src/icm20948.c:20:6:icm20948_init 8 static +../Core/Src/icm20948.c:33:6:icm20948_read_accel 56 static +../Core/Src/icm20948.c:48:6:icm20948_read_gyro 56 static +../Core/Src/icm20948.c:62:6:icm20948_mag_init 8 static +../Core/Src/icm20948.c:72:6:icm20948_read_mag 56 static diff --git a/Debug/Core/Src/lcd_i2c.cyclo b/Debug/Core/Src/lcd_i2c.cyclo new file mode 100644 index 0000000..885dd59 --- /dev/null +++ b/Debug/Core/Src/lcd_i2c.cyclo @@ -0,0 +1,7 @@ +../Core/Src/lcd_i2c.c:13:6:lcd_init 1 +../Core/Src/lcd_i2c.c:24:6:lcd_clear 1 +../Core/Src/lcd_i2c.c:29:6:lcd_set_cursor 1 +../Core/Src/lcd_i2c.c:34:6:lcd_print 2 +../Core/Src/lcd_i2c.c:40:6:lcd_send_cmd 1 +../Core/Src/lcd_i2c.c:44:6:lcd_send_data 1 +../Core/Src/lcd_i2c.c:48:6:lcd_send 1 diff --git a/Debug/Core/Src/lcd_i2c.d b/Debug/Core/Src/lcd_i2c.d new file mode 100644 index 0000000..230bf75 --- /dev/null +++ b/Debug/Core/Src/lcd_i2c.d @@ -0,0 +1,58 @@ +Core/Src/lcd_i2c.o: ../Core/Src/lcd_i2c.c ../Core/Inc/lcd_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Core/Inc/lcd_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Core/Src/lcd_i2c.o b/Debug/Core/Src/lcd_i2c.o new file mode 100644 index 0000000..a2a44b5 Binary files /dev/null and b/Debug/Core/Src/lcd_i2c.o differ diff --git a/Debug/Core/Src/lcd_i2c.su b/Debug/Core/Src/lcd_i2c.su new file mode 100644 index 0000000..a749463 --- /dev/null +++ b/Debug/Core/Src/lcd_i2c.su @@ -0,0 +1,7 @@ +../Core/Src/lcd_i2c.c:13:6:lcd_init 8 static +../Core/Src/lcd_i2c.c:24:6:lcd_clear 8 static +../Core/Src/lcd_i2c.c:29:6:lcd_set_cursor 24 static +../Core/Src/lcd_i2c.c:34:6:lcd_print 16 static +../Core/Src/lcd_i2c.c:40:6:lcd_send_cmd 16 static +../Core/Src/lcd_i2c.c:44:6:lcd_send_data 16 static +../Core/Src/lcd_i2c.c:48:6:lcd_send 32 static diff --git a/Debug/Core/Src/main.cyclo b/Debug/Core/Src/main.cyclo new file mode 100644 index 0000000..166d08f --- /dev/null +++ b/Debug/Core/Src/main.cyclo @@ -0,0 +1,10 @@ +../Core/Inc/FusionMath.h:136:21:FusionRadiansToDegrees 1 +../Core/Inc/FusionMath.h:148:21:FusionAsin 3 +../Core/Inc/FusionMath.h:466:27:FusionQuaternionToEuler 1 +../Core/Src/main.c:21:5:__io_putchar 1 +../Core/Src/main.c:29:5:main 10 +../Core/Src/main.c:179:6:SystemClock_Config 4 +../Core/Src/main.c:224:13:MX_I2C1_Init 4 +../Core/Src/main.c:251:13:MX_USART2_UART_Init 2 +../Core/Src/main.c:269:13:MX_GPIO_Init 1 +../Core/Src/main.c:312:6:Error_Handler 1 diff --git a/Debug/Core/Src/main.d b/Debug/Core/Src/main.d new file mode 100644 index 0000000..d151ed4 --- /dev/null +++ b/Debug/Core/Src/main.d @@ -0,0 +1,67 @@ +Core/Src/main.o: ../Core/Src/main.c ../Core/Inc/main.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h \ + ../Core/Inc/lcd_i2c.h ../Core/Inc/icm20948.h ../Core/Inc/FusionAhrs.h \ + ../Core/Inc/FusionConvention.h ../Core/Inc/FusionMath.h \ + ../Core/Inc/moto_config.h +../Core/Inc/main.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: +../Core/Inc/lcd_i2c.h: +../Core/Inc/icm20948.h: +../Core/Inc/FusionAhrs.h: +../Core/Inc/FusionConvention.h: +../Core/Inc/FusionMath.h: +../Core/Inc/moto_config.h: diff --git a/Debug/Core/Src/main.o b/Debug/Core/Src/main.o new file mode 100644 index 0000000..11b53f0 Binary files /dev/null and b/Debug/Core/Src/main.o differ diff --git a/Debug/Core/Src/main.su b/Debug/Core/Src/main.su new file mode 100644 index 0000000..6ef78fe --- /dev/null +++ b/Debug/Core/Src/main.su @@ -0,0 +1,10 @@ +../Core/Inc/FusionMath.h:136:21:FusionRadiansToDegrees 16 static +../Core/Inc/FusionMath.h:148:21:FusionAsin 16 static +../Core/Inc/FusionMath.h:466:27:FusionQuaternionToEuler 72 static +../Core/Src/main.c:21:5:__io_putchar 16 static +../Core/Src/main.c:29:5:main 328 static +../Core/Src/main.c:179:6:SystemClock_Config 96 static +../Core/Src/main.c:224:13:MX_I2C1_Init 8 static +../Core/Src/main.c:251:13:MX_USART2_UART_Init 8 static +../Core/Src/main.c:269:13:MX_GPIO_Init 48 static +../Core/Src/main.c:312:6:Error_Handler 4 static,ignoring_inline_asm diff --git a/Debug/Core/Src/moto_config.cyclo b/Debug/Core/Src/moto_config.cyclo new file mode 100644 index 0000000..f576f95 --- /dev/null +++ b/Debug/Core/Src/moto_config.cyclo @@ -0,0 +1,8 @@ +../Core/Src/moto_config.c:15:6:Moto_InitData 1 +../Core/Src/moto_config.c:22:6:Moto_UpdateState 7 +../Core/Src/moto_config.c:64:6:Moto_FilterAngles 1 +../Core/Src/moto_config.c:76:13:Moto_GetStateString 8 +../Core/Src/moto_config.c:89:6:Moto_UpdateStats 11 +../Core/Src/moto_config.c:111:6:Moto_CalibrateMagnetometer 1 +../Core/Src/moto_config.c:118:6:Moto_DetectCrash 4 +../Core/Src/moto_config.c:136:6:Moto_FormatDisplay 13 diff --git a/Debug/Core/Src/moto_config.d b/Debug/Core/Src/moto_config.d new file mode 100644 index 0000000..13e1aa9 --- /dev/null +++ b/Debug/Core/Src/moto_config.d @@ -0,0 +1,3 @@ +Core/Src/moto_config.o: ../Core/Src/moto_config.c \ + ../Core/Inc/moto_config.h +../Core/Inc/moto_config.h: diff --git a/Debug/Core/Src/moto_config.o b/Debug/Core/Src/moto_config.o new file mode 100644 index 0000000..def0ae2 Binary files /dev/null and b/Debug/Core/Src/moto_config.o differ diff --git a/Debug/Core/Src/moto_config.su b/Debug/Core/Src/moto_config.su new file mode 100644 index 0000000..34e512e --- /dev/null +++ b/Debug/Core/Src/moto_config.su @@ -0,0 +1,8 @@ +../Core/Src/moto_config.c:15:6:Moto_InitData 16 static +../Core/Src/moto_config.c:22:6:Moto_UpdateState 48 static +../Core/Src/moto_config.c:64:6:Moto_FilterAngles 16 static +../Core/Src/moto_config.c:76:13:Moto_GetStateString 16 static +../Core/Src/moto_config.c:89:6:Moto_UpdateStats 32 static +../Core/Src/moto_config.c:111:6:Moto_CalibrateMagnetometer 24 static +../Core/Src/moto_config.c:118:6:Moto_DetectCrash 16 static +../Core/Src/moto_config.c:136:6:Moto_FormatDisplay 48 static diff --git a/Debug/Core/Src/stm32l4xx_hal_msp.cyclo b/Debug/Core/Src/stm32l4xx_hal_msp.cyclo new file mode 100644 index 0000000..abbed1e --- /dev/null +++ b/Debug/Core/Src/stm32l4xx_hal_msp.cyclo @@ -0,0 +1,5 @@ +../Core/Src/stm32l4xx_hal_msp.c:63:6:HAL_MspInit 1 +../Core/Src/stm32l4xx_hal_msp.c:86:6:HAL_I2C_MspInit 3 +../Core/Src/stm32l4xx_hal_msp.c:133:6:HAL_I2C_MspDeInit 2 +../Core/Src/stm32l4xx_hal_msp.c:164:6:HAL_UART_MspInit 3 +../Core/Src/stm32l4xx_hal_msp.c:212:6:HAL_UART_MspDeInit 2 diff --git a/Debug/Core/Src/stm32l4xx_hal_msp.d b/Debug/Core/Src/stm32l4xx_hal_msp.d new file mode 100644 index 0000000..a64260b --- /dev/null +++ b/Debug/Core/Src/stm32l4xx_hal_msp.d @@ -0,0 +1,58 @@ +Core/Src/stm32l4xx_hal_msp.o: ../Core/Src/stm32l4xx_hal_msp.c \ + ../Core/Inc/main.h ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Core/Inc/main.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Core/Src/stm32l4xx_hal_msp.o b/Debug/Core/Src/stm32l4xx_hal_msp.o new file mode 100644 index 0000000..baa5a60 Binary files /dev/null and b/Debug/Core/Src/stm32l4xx_hal_msp.o differ diff --git a/Debug/Core/Src/stm32l4xx_hal_msp.su b/Debug/Core/Src/stm32l4xx_hal_msp.su new file mode 100644 index 0000000..49caa24 --- /dev/null +++ b/Debug/Core/Src/stm32l4xx_hal_msp.su @@ -0,0 +1,5 @@ +../Core/Src/stm32l4xx_hal_msp.c:63:6:HAL_MspInit 16 static +../Core/Src/stm32l4xx_hal_msp.c:86:6:HAL_I2C_MspInit 152 static +../Core/Src/stm32l4xx_hal_msp.c:133:6:HAL_I2C_MspDeInit 16 static +../Core/Src/stm32l4xx_hal_msp.c:164:6:HAL_UART_MspInit 152 static +../Core/Src/stm32l4xx_hal_msp.c:212:6:HAL_UART_MspDeInit 16 static diff --git a/Debug/Core/Src/stm32l4xx_it.cyclo b/Debug/Core/Src/stm32l4xx_it.cyclo new file mode 100644 index 0000000..7ac543a --- /dev/null +++ b/Debug/Core/Src/stm32l4xx_it.cyclo @@ -0,0 +1,9 @@ +../Core/Src/stm32l4xx_it.c:69:6:NMI_Handler 1 +../Core/Src/stm32l4xx_it.c:84:6:HardFault_Handler 1 +../Core/Src/stm32l4xx_it.c:99:6:MemManage_Handler 1 +../Core/Src/stm32l4xx_it.c:114:6:BusFault_Handler 1 +../Core/Src/stm32l4xx_it.c:129:6:UsageFault_Handler 1 +../Core/Src/stm32l4xx_it.c:144:6:SVC_Handler 1 +../Core/Src/stm32l4xx_it.c:157:6:DebugMon_Handler 1 +../Core/Src/stm32l4xx_it.c:170:6:PendSV_Handler 1 +../Core/Src/stm32l4xx_it.c:183:6:SysTick_Handler 1 diff --git a/Debug/Core/Src/stm32l4xx_it.d b/Debug/Core/Src/stm32l4xx_it.d new file mode 100644 index 0000000..667cf14 --- /dev/null +++ b/Debug/Core/Src/stm32l4xx_it.d @@ -0,0 +1,60 @@ +Core/Src/stm32l4xx_it.o: ../Core/Src/stm32l4xx_it.c ../Core/Inc/main.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h \ + ../Core/Inc/stm32l4xx_it.h +../Core/Inc/main.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: +../Core/Inc/stm32l4xx_it.h: diff --git a/Debug/Core/Src/stm32l4xx_it.o b/Debug/Core/Src/stm32l4xx_it.o new file mode 100644 index 0000000..4596daf Binary files /dev/null and b/Debug/Core/Src/stm32l4xx_it.o differ diff --git a/Debug/Core/Src/stm32l4xx_it.su b/Debug/Core/Src/stm32l4xx_it.su new file mode 100644 index 0000000..5545362 --- /dev/null +++ b/Debug/Core/Src/stm32l4xx_it.su @@ -0,0 +1,9 @@ +../Core/Src/stm32l4xx_it.c:69:6:NMI_Handler 4 static +../Core/Src/stm32l4xx_it.c:84:6:HardFault_Handler 4 static +../Core/Src/stm32l4xx_it.c:99:6:MemManage_Handler 4 static +../Core/Src/stm32l4xx_it.c:114:6:BusFault_Handler 4 static +../Core/Src/stm32l4xx_it.c:129:6:UsageFault_Handler 4 static +../Core/Src/stm32l4xx_it.c:144:6:SVC_Handler 4 static +../Core/Src/stm32l4xx_it.c:157:6:DebugMon_Handler 4 static +../Core/Src/stm32l4xx_it.c:170:6:PendSV_Handler 4 static +../Core/Src/stm32l4xx_it.c:183:6:SysTick_Handler 8 static diff --git a/Debug/Core/Src/subdir.mk b/Debug/Core/Src/subdir.mk new file mode 100644 index 0000000..3c930cc --- /dev/null +++ b/Debug/Core/Src/subdir.mk @@ -0,0 +1,54 @@ +################################################################################ +# Automatically-generated file. Do not edit! +# Toolchain: GNU Tools for STM32 (13.3.rel1) +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +C_SRCS += \ +../Core/Src/FusionAhrs.c \ +../Core/Src/icm20948.c \ +../Core/Src/lcd_i2c.c \ +../Core/Src/main.c \ +../Core/Src/moto_config.c \ +../Core/Src/stm32l4xx_hal_msp.c \ +../Core/Src/stm32l4xx_it.c \ +../Core/Src/syscalls.c \ +../Core/Src/sysmem.c \ +../Core/Src/system_stm32l4xx.c + +OBJS += \ +./Core/Src/FusionAhrs.o \ +./Core/Src/icm20948.o \ +./Core/Src/lcd_i2c.o \ +./Core/Src/main.o \ +./Core/Src/moto_config.o \ +./Core/Src/stm32l4xx_hal_msp.o \ +./Core/Src/stm32l4xx_it.o \ +./Core/Src/syscalls.o \ +./Core/Src/sysmem.o \ +./Core/Src/system_stm32l4xx.o + +C_DEPS += \ +./Core/Src/FusionAhrs.d \ +./Core/Src/icm20948.d \ +./Core/Src/lcd_i2c.d \ +./Core/Src/main.d \ +./Core/Src/moto_config.d \ +./Core/Src/stm32l4xx_hal_msp.d \ +./Core/Src/stm32l4xx_it.d \ +./Core/Src/syscalls.d \ +./Core/Src/sysmem.d \ +./Core/Src/system_stm32l4xx.d + + +# Each subdirectory must supply rules for building sources it contributes +Core/Src/%.o Core/Src/%.su Core/Src/%.cyclo: ../Core/Src/%.c Core/Src/subdir.mk + arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DUSE_HAL_DRIVER -DSTM32L452xx -c -I../Core/Inc -I../Drivers/STM32L4xx_HAL_Driver/Inc -I../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32L4xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "$@" + +clean: clean-Core-2f-Src + +clean-Core-2f-Src: + -$(RM) ./Core/Src/FusionAhrs.cyclo ./Core/Src/FusionAhrs.d ./Core/Src/FusionAhrs.o ./Core/Src/FusionAhrs.su ./Core/Src/icm20948.cyclo ./Core/Src/icm20948.d ./Core/Src/icm20948.o ./Core/Src/icm20948.su ./Core/Src/lcd_i2c.cyclo ./Core/Src/lcd_i2c.d ./Core/Src/lcd_i2c.o ./Core/Src/lcd_i2c.su ./Core/Src/main.cyclo ./Core/Src/main.d ./Core/Src/main.o ./Core/Src/main.su ./Core/Src/moto_config.cyclo ./Core/Src/moto_config.d ./Core/Src/moto_config.o ./Core/Src/moto_config.su ./Core/Src/stm32l4xx_hal_msp.cyclo ./Core/Src/stm32l4xx_hal_msp.d ./Core/Src/stm32l4xx_hal_msp.o ./Core/Src/stm32l4xx_hal_msp.su ./Core/Src/stm32l4xx_it.cyclo ./Core/Src/stm32l4xx_it.d ./Core/Src/stm32l4xx_it.o ./Core/Src/stm32l4xx_it.su ./Core/Src/syscalls.cyclo ./Core/Src/syscalls.d ./Core/Src/syscalls.o ./Core/Src/syscalls.su ./Core/Src/sysmem.cyclo ./Core/Src/sysmem.d ./Core/Src/sysmem.o ./Core/Src/sysmem.su ./Core/Src/system_stm32l4xx.cyclo ./Core/Src/system_stm32l4xx.d ./Core/Src/system_stm32l4xx.o ./Core/Src/system_stm32l4xx.su + +.PHONY: clean-Core-2f-Src + diff --git a/Debug/Core/Src/syscalls.cyclo b/Debug/Core/Src/syscalls.cyclo new file mode 100644 index 0000000..6cbfdd0 --- /dev/null +++ b/Debug/Core/Src/syscalls.cyclo @@ -0,0 +1,18 @@ +../Core/Src/syscalls.c:44:6:initialise_monitor_handles 1 +../Core/Src/syscalls.c:48:5:_getpid 1 +../Core/Src/syscalls.c:53:5:_kill 1 +../Core/Src/syscalls.c:61:6:_exit 1 +../Core/Src/syscalls.c:67:27:_read 2 +../Core/Src/syscalls.c:80:27:_write 2 +../Core/Src/syscalls.c:92:5:_close 1 +../Core/Src/syscalls.c:99:5:_fstat 1 +../Core/Src/syscalls.c:106:5:_isatty 1 +../Core/Src/syscalls.c:112:5:_lseek 1 +../Core/Src/syscalls.c:120:5:_open 1 +../Core/Src/syscalls.c:128:5:_wait 1 +../Core/Src/syscalls.c:135:5:_unlink 1 +../Core/Src/syscalls.c:142:5:_times 1 +../Core/Src/syscalls.c:148:5:_stat 1 +../Core/Src/syscalls.c:155:5:_link 1 +../Core/Src/syscalls.c:163:5:_fork 1 +../Core/Src/syscalls.c:169:5:_execve 1 diff --git a/Debug/Core/Src/syscalls.d b/Debug/Core/Src/syscalls.d new file mode 100644 index 0000000..8667c70 --- /dev/null +++ b/Debug/Core/Src/syscalls.d @@ -0,0 +1 @@ +Core/Src/syscalls.o: ../Core/Src/syscalls.c diff --git a/Debug/Core/Src/syscalls.o b/Debug/Core/Src/syscalls.o new file mode 100644 index 0000000..74e6964 Binary files /dev/null and b/Debug/Core/Src/syscalls.o differ diff --git a/Debug/Core/Src/syscalls.su b/Debug/Core/Src/syscalls.su new file mode 100644 index 0000000..50b547a --- /dev/null +++ b/Debug/Core/Src/syscalls.su @@ -0,0 +1,18 @@ +../Core/Src/syscalls.c:44:6:initialise_monitor_handles 4 static +../Core/Src/syscalls.c:48:5:_getpid 4 static +../Core/Src/syscalls.c:53:5:_kill 16 static +../Core/Src/syscalls.c:61:6:_exit 16 static +../Core/Src/syscalls.c:67:27:_read 32 static +../Core/Src/syscalls.c:80:27:_write 32 static +../Core/Src/syscalls.c:92:5:_close 16 static +../Core/Src/syscalls.c:99:5:_fstat 16 static +../Core/Src/syscalls.c:106:5:_isatty 16 static +../Core/Src/syscalls.c:112:5:_lseek 24 static +../Core/Src/syscalls.c:120:5:_open 12 static +../Core/Src/syscalls.c:128:5:_wait 16 static +../Core/Src/syscalls.c:135:5:_unlink 16 static +../Core/Src/syscalls.c:142:5:_times 16 static +../Core/Src/syscalls.c:148:5:_stat 16 static +../Core/Src/syscalls.c:155:5:_link 16 static +../Core/Src/syscalls.c:163:5:_fork 8 static +../Core/Src/syscalls.c:169:5:_execve 24 static diff --git a/Debug/Core/Src/sysmem.cyclo b/Debug/Core/Src/sysmem.cyclo new file mode 100644 index 0000000..0090c10 --- /dev/null +++ b/Debug/Core/Src/sysmem.cyclo @@ -0,0 +1 @@ +../Core/Src/sysmem.c:53:7:_sbrk 3 diff --git a/Debug/Core/Src/sysmem.d b/Debug/Core/Src/sysmem.d new file mode 100644 index 0000000..74fecf9 --- /dev/null +++ b/Debug/Core/Src/sysmem.d @@ -0,0 +1 @@ +Core/Src/sysmem.o: ../Core/Src/sysmem.c diff --git a/Debug/Core/Src/sysmem.o b/Debug/Core/Src/sysmem.o new file mode 100644 index 0000000..819fd46 Binary files /dev/null and b/Debug/Core/Src/sysmem.o differ diff --git a/Debug/Core/Src/sysmem.su b/Debug/Core/Src/sysmem.su new file mode 100644 index 0000000..12d5f17 --- /dev/null +++ b/Debug/Core/Src/sysmem.su @@ -0,0 +1 @@ +../Core/Src/sysmem.c:53:7:_sbrk 32 static diff --git a/Debug/Core/Src/system_stm32l4xx.cyclo b/Debug/Core/Src/system_stm32l4xx.cyclo new file mode 100644 index 0000000..7caaa04 --- /dev/null +++ b/Debug/Core/Src/system_stm32l4xx.cyclo @@ -0,0 +1,2 @@ +../Core/Src/system_stm32l4xx.c:197:6:SystemInit 1 +../Core/Src/system_stm32l4xx.c:251:6:SystemCoreClockUpdate 8 diff --git a/Debug/Core/Src/system_stm32l4xx.d b/Debug/Core/Src/system_stm32l4xx.d new file mode 100644 index 0000000..1f286df --- /dev/null +++ b/Debug/Core/Src/system_stm32l4xx.d @@ -0,0 +1,57 @@ +Core/Src/system_stm32l4xx.o: ../Core/Src/system_stm32l4xx.c \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Core/Src/system_stm32l4xx.o b/Debug/Core/Src/system_stm32l4xx.o new file mode 100644 index 0000000..4fdfa4b Binary files /dev/null and b/Debug/Core/Src/system_stm32l4xx.o differ diff --git a/Debug/Core/Src/system_stm32l4xx.su b/Debug/Core/Src/system_stm32l4xx.su new file mode 100644 index 0000000..20388ef --- /dev/null +++ b/Debug/Core/Src/system_stm32l4xx.su @@ -0,0 +1,2 @@ +../Core/Src/system_stm32l4xx.c:197:6:SystemInit 4 static +../Core/Src/system_stm32l4xx.c:251:6:SystemCoreClockUpdate 32 static diff --git a/Debug/Core/Startup/startup_stm32l452retxp.d b/Debug/Core/Startup/startup_stm32l452retxp.d new file mode 100644 index 0000000..12108ce --- /dev/null +++ b/Debug/Core/Startup/startup_stm32l452retxp.d @@ -0,0 +1,2 @@ +Core/Startup/startup_stm32l452retxp.o: \ + ../Core/Startup/startup_stm32l452retxp.s diff --git a/Debug/Core/Startup/startup_stm32l452retxp.o b/Debug/Core/Startup/startup_stm32l452retxp.o new file mode 100644 index 0000000..4e9e2c2 Binary files /dev/null and b/Debug/Core/Startup/startup_stm32l452retxp.o differ diff --git a/Debug/Core/Startup/subdir.mk b/Debug/Core/Startup/subdir.mk new file mode 100644 index 0000000..966111d --- /dev/null +++ b/Debug/Core/Startup/subdir.mk @@ -0,0 +1,27 @@ +################################################################################ +# Automatically-generated file. Do not edit! +# Toolchain: GNU Tools for STM32 (13.3.rel1) +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +S_SRCS += \ +../Core/Startup/startup_stm32l452retxp.s + +OBJS += \ +./Core/Startup/startup_stm32l452retxp.o + +S_DEPS += \ +./Core/Startup/startup_stm32l452retxp.d + + +# Each subdirectory must supply rules for building sources it contributes +Core/Startup/%.o: ../Core/Startup/%.s Core/Startup/subdir.mk + arm-none-eabi-gcc -mcpu=cortex-m4 -g3 -DDEBUG -c -x assembler-with-cpp -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "$@" "$<" + +clean: clean-Core-2f-Startup + +clean-Core-2f-Startup: + -$(RM) ./Core/Startup/startup_stm32l452retxp.d ./Core/Startup/startup_stm32l452retxp.o + +.PHONY: clean-Core-2f-Startup + diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.cyclo new file mode 100644 index 0000000..7e352dd --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.cyclo @@ -0,0 +1,35 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:152:19:HAL_Init 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:196:19:HAL_DeInit 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:225:13:HAL_MspInit 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:236:13:HAL_MspDeInit 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:259:26:HAL_InitTick 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:327:13:HAL_IncTick 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:338:17:HAL_GetTick 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:347:10:HAL_GetTickPrio 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:357:19:HAL_SetTickFreq 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:387:21:HAL_GetTickFreq 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:403:13:HAL_Delay 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:429:13:HAL_SuspendTick 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:445:13:HAL_ResumeTick 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:455:10:HAL_GetHalVersion 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:464:10:HAL_GetREVID 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:473:10:HAL_GetDEVID 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:482:10:HAL_GetUIDw0 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:491:10:HAL_GetUIDw1 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:500:10:HAL_GetUIDw2 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:529:6:HAL_DBGMCU_EnableDBGSleepMode 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:538:6:HAL_DBGMCU_DisableDBGSleepMode 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:547:6:HAL_DBGMCU_EnableDBGStopMode 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:556:6:HAL_DBGMCU_DisableDBGStopMode 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:565:6:HAL_DBGMCU_EnableDBGStandbyMode 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:574:6:HAL_DBGMCU_DisableDBGStandbyMode 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:607:6:HAL_SYSCFG_SRAM2Erase 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:626:6:HAL_SYSCFG_EnableMemorySwappingBank 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:641:6:HAL_SYSCFG_DisableMemorySwappingBank 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:658:6:HAL_SYSCFG_VREFBUF_VoltageScalingConfig 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:674:6:HAL_SYSCFG_VREFBUF_HighImpedanceConfig 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:686:6:HAL_SYSCFG_VREFBUF_TrimmingConfig 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:698:19:HAL_SYSCFG_EnableVREFBUF 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:724:6:HAL_SYSCFG_DisableVREFBUF 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:735:6:HAL_SYSCFG_EnableIOAnalogSwitchBooster 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:745:6:HAL_SYSCFG_DisableIOAnalogSwitchBooster 1 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.d new file mode 100644 index 0000000..e749369 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o new file mode 100644 index 0000000..6a4e036 Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.su new file mode 100644 index 0000000..72d13ea --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.su @@ -0,0 +1,35 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:152:19:HAL_Init 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:196:19:HAL_DeInit 8 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:225:13:HAL_MspInit 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:236:13:HAL_MspDeInit 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:259:26:HAL_InitTick 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:327:13:HAL_IncTick 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:338:17:HAL_GetTick 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:347:10:HAL_GetTickPrio 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:357:19:HAL_SetTickFreq 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:387:21:HAL_GetTickFreq 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:403:13:HAL_Delay 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:429:13:HAL_SuspendTick 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:445:13:HAL_ResumeTick 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:455:10:HAL_GetHalVersion 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:464:10:HAL_GetREVID 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:473:10:HAL_GetDEVID 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:482:10:HAL_GetUIDw0 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:491:10:HAL_GetUIDw1 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:500:10:HAL_GetUIDw2 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:529:6:HAL_DBGMCU_EnableDBGSleepMode 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:538:6:HAL_DBGMCU_DisableDBGSleepMode 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:547:6:HAL_DBGMCU_EnableDBGStopMode 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:556:6:HAL_DBGMCU_DisableDBGStopMode 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:565:6:HAL_DBGMCU_EnableDBGStandbyMode 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:574:6:HAL_DBGMCU_DisableDBGStandbyMode 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:607:6:HAL_SYSCFG_SRAM2Erase 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:626:6:HAL_SYSCFG_EnableMemorySwappingBank 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:641:6:HAL_SYSCFG_DisableMemorySwappingBank 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:658:6:HAL_SYSCFG_VREFBUF_VoltageScalingConfig 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:674:6:HAL_SYSCFG_VREFBUF_HighImpedanceConfig 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:686:6:HAL_SYSCFG_VREFBUF_TrimmingConfig 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:698:19:HAL_SYSCFG_EnableVREFBUF 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:724:6:HAL_SYSCFG_DisableVREFBUF 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:735:6:HAL_SYSCFG_EnableIOAnalogSwitchBooster 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c:745:6:HAL_SYSCFG_DisableIOAnalogSwitchBooster 4 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.cyclo new file mode 100644 index 0000000..01b1a44 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.cyclo @@ -0,0 +1,34 @@ +../Drivers/CMSIS/Include/core_cm4.h:1648:22:__NVIC_SetPriorityGrouping 1 +../Drivers/CMSIS/Include/core_cm4.h:1667:26:__NVIC_GetPriorityGrouping 1 +../Drivers/CMSIS/Include/core_cm4.h:1679:22:__NVIC_EnableIRQ 2 +../Drivers/CMSIS/Include/core_cm4.h:1717:22:__NVIC_DisableIRQ 2 +../Drivers/CMSIS/Include/core_cm4.h:1736:26:__NVIC_GetPendingIRQ 2 +../Drivers/CMSIS/Include/core_cm4.h:1755:22:__NVIC_SetPendingIRQ 2 +../Drivers/CMSIS/Include/core_cm4.h:1770:22:__NVIC_ClearPendingIRQ 2 +../Drivers/CMSIS/Include/core_cm4.h:1787:26:__NVIC_GetActive 2 +../Drivers/CMSIS/Include/core_cm4.h:1809:22:__NVIC_SetPriority 2 +../Drivers/CMSIS/Include/core_cm4.h:1831:26:__NVIC_GetPriority 2 +../Drivers/CMSIS/Include/core_cm4.h:1856:26:NVIC_EncodePriority 2 +../Drivers/CMSIS/Include/core_cm4.h:1883:22:NVIC_DecodePriority 2 +../Drivers/CMSIS/Include/core_cm4.h:1933:34:__NVIC_SystemReset 1 +../Drivers/CMSIS/Include/core_cm4.h:2017:26:SysTick_Config 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:163:6:HAL_NVIC_SetPriorityGrouping 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:185:6:HAL_NVIC_SetPriority 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:207:6:HAL_NVIC_EnableIRQ 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:223:6:HAL_NVIC_DisableIRQ 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:236:6:HAL_NVIC_SystemReset 0 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:249:10:HAL_SYSTICK_Config 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:277:10:HAL_NVIC_GetPriorityGrouping 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:304:6:HAL_NVIC_GetPriority 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:319:6:HAL_NVIC_SetPendingIRQ 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:337:10:HAL_NVIC_GetPendingIRQ 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:353:6:HAL_NVIC_ClearPendingIRQ 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:370:10:HAL_NVIC_GetActive 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:384:6:HAL_SYSTICK_CLKSourceConfig 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:402:6:HAL_SYSTICK_IRQHandler 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:411:13:HAL_SYSTICK_Callback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:430:6:HAL_MPU_Enable 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:445:6:HAL_MPU_Disable 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:458:6:HAL_MPU_EnableRegion 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:474:6:HAL_MPU_DisableRegion 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:492:6:HAL_MPU_ConfigRegion 1 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.d new file mode 100644 index 0000000..3fefc6e --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o new file mode 100644 index 0000000..43bb7d1 Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.su new file mode 100644 index 0000000..3030ad0 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.su @@ -0,0 +1,34 @@ +../Drivers/CMSIS/Include/core_cm4.h:1648:22:__NVIC_SetPriorityGrouping 24 static +../Drivers/CMSIS/Include/core_cm4.h:1667:26:__NVIC_GetPriorityGrouping 4 static +../Drivers/CMSIS/Include/core_cm4.h:1679:22:__NVIC_EnableIRQ 16 static,ignoring_inline_asm +../Drivers/CMSIS/Include/core_cm4.h:1717:22:__NVIC_DisableIRQ 16 static,ignoring_inline_asm +../Drivers/CMSIS/Include/core_cm4.h:1736:26:__NVIC_GetPendingIRQ 16 static +../Drivers/CMSIS/Include/core_cm4.h:1755:22:__NVIC_SetPendingIRQ 16 static +../Drivers/CMSIS/Include/core_cm4.h:1770:22:__NVIC_ClearPendingIRQ 16 static +../Drivers/CMSIS/Include/core_cm4.h:1787:26:__NVIC_GetActive 16 static +../Drivers/CMSIS/Include/core_cm4.h:1809:22:__NVIC_SetPriority 16 static +../Drivers/CMSIS/Include/core_cm4.h:1831:26:__NVIC_GetPriority 16 static +../Drivers/CMSIS/Include/core_cm4.h:1856:26:NVIC_EncodePriority 40 static +../Drivers/CMSIS/Include/core_cm4.h:1883:22:NVIC_DecodePriority 40 static +../Drivers/CMSIS/Include/core_cm4.h:1933:34:__NVIC_SystemReset 4 static,ignoring_inline_asm +../Drivers/CMSIS/Include/core_cm4.h:2017:26:SysTick_Config 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:163:6:HAL_NVIC_SetPriorityGrouping 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:185:6:HAL_NVIC_SetPriority 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:207:6:HAL_NVIC_EnableIRQ 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:223:6:HAL_NVIC_DisableIRQ 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:236:6:HAL_NVIC_SystemReset 8 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:249:10:HAL_SYSTICK_Config 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:277:10:HAL_NVIC_GetPriorityGrouping 8 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:304:6:HAL_NVIC_GetPriority 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:319:6:HAL_NVIC_SetPendingIRQ 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:337:10:HAL_NVIC_GetPendingIRQ 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:353:6:HAL_NVIC_ClearPendingIRQ 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:370:10:HAL_NVIC_GetActive 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:384:6:HAL_SYSTICK_CLKSourceConfig 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:402:6:HAL_SYSTICK_IRQHandler 8 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:411:13:HAL_SYSTICK_Callback 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:430:6:HAL_MPU_Enable 16 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:445:6:HAL_MPU_Disable 4 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:458:6:HAL_MPU_EnableRegion 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:474:6:HAL_MPU_DisableRegion 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c:492:6:HAL_MPU_ConfigRegion 16 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.cyclo new file mode 100644 index 0000000..331117c --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.cyclo @@ -0,0 +1,13 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:154:19:HAL_DMA_Init 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:295:19:HAL_DMA_DeInit 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:431:19:HAL_DMA_Start 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:474:19:HAL_DMA_Start_IT 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:547:19:HAL_DMA_Abort 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:609:19:HAL_DMA_Abort_IT 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:676:19:HAL_DMA_PollForTransfer 10 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:806:6:HAL_DMA_IRQHandler 12 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:902:19:HAL_DMA_RegisterCallback 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:953:19:HAL_DMA_UnRegisterCallback 8 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:1031:22:HAL_DMA_GetState 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:1043:10:HAL_DMA_GetError 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:1069:13:DMA_SetConfig 2 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.d new file mode 100644 index 0000000..41c81af --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o new file mode 100644 index 0000000..a6761a5 Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.su new file mode 100644 index 0000000..f8d3944 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.su @@ -0,0 +1,13 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:154:19:HAL_DMA_Init 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:295:19:HAL_DMA_DeInit 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:431:19:HAL_DMA_Start 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:474:19:HAL_DMA_Start_IT 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:547:19:HAL_DMA_Abort 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:609:19:HAL_DMA_Abort_IT 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:676:19:HAL_DMA_PollForTransfer 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:806:6:HAL_DMA_IRQHandler 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:902:19:HAL_DMA_RegisterCallback 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:953:19:HAL_DMA_UnRegisterCallback 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:1031:22:HAL_DMA_GetState 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:1043:10:HAL_DMA_GetError 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c:1069:13:DMA_SetConfig 24 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.cyclo new file mode 100644 index 0000000..e69de29 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.d new file mode 100644 index 0000000..1c8206a --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o new file mode 100644 index 0000000..675ca51 Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.su new file mode 100644 index 0000000..e69de29 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.cyclo new file mode 100644 index 0000000..70742e5 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.cyclo @@ -0,0 +1,9 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:143:19:HAL_EXTI_SetConfigLine 9 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:268:19:HAL_EXTI_GetConfigLine 9 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:362:19:HAL_EXTI_ClearConfigLine 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:428:19:HAL_EXTI_RegisterCallback 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:454:19:HAL_EXTI_GetHandle 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:495:6:HAL_EXTI_IRQHandler 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:533:10:HAL_EXTI_GetPending 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:572:6:HAL_EXTI_ClearPending 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:603:6:HAL_EXTI_GenerateSWI 1 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.d new file mode 100644 index 0000000..ac36c9b --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o new file mode 100644 index 0000000..227fbad Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.su new file mode 100644 index 0000000..10c0f1e --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.su @@ -0,0 +1,9 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:143:19:HAL_EXTI_SetConfigLine 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:268:19:HAL_EXTI_GetConfigLine 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:362:19:HAL_EXTI_ClearConfigLine 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:428:19:HAL_EXTI_RegisterCallback 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:454:19:HAL_EXTI_GetHandle 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:495:6:HAL_EXTI_IRQHandler 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:533:10:HAL_EXTI_GetPending 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:572:6:HAL_EXTI_ClearPending 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c:603:6:HAL_EXTI_GenerateSWI 32 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.cyclo new file mode 100644 index 0000000..95a8746 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.cyclo @@ -0,0 +1,14 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:169:19:HAL_FLASH_Program 9 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:251:19:HAL_FLASH_Program_IT 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:311:6:HAL_FLASH_IRQHandler 16 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:454:13:HAL_FLASH_EndOfOperationCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:472:13:HAL_FLASH_OperationErrorCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:505:19:HAL_FLASH_Unlock 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:529:19:HAL_FLASH_Lock 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:541:19:HAL_FLASH_OB_Unlock 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:561:19:HAL_FLASH_OB_Lock 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:573:19:HAL_FLASH_OB_Launch 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:622:10:HAL_FLASH_GetError 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:646:19:FLASH_WaitForLastOperation 8 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:696:13:FLASH_Program_DoubleWord 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:721:13:FLASH_Program_Fast 2 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.d new file mode 100644 index 0000000..44e5cec --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o new file mode 100644 index 0000000..d52d31f Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.su new file mode 100644 index 0000000..f65fa52 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.su @@ -0,0 +1,14 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:169:19:HAL_FLASH_Program 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:251:19:HAL_FLASH_Program_IT 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:311:6:HAL_FLASH_IRQHandler 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:454:13:HAL_FLASH_EndOfOperationCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:472:13:HAL_FLASH_OperationErrorCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:505:19:HAL_FLASH_Unlock 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:529:19:HAL_FLASH_Lock 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:541:19:HAL_FLASH_OB_Unlock 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:561:19:HAL_FLASH_OB_Lock 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:573:19:HAL_FLASH_OB_Launch 8 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:622:10:HAL_FLASH_GetError 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:646:19:FLASH_WaitForLastOperation 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:696:13:FLASH_Program_DoubleWord 24 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c:721:13:FLASH_Program_Fast 40 static,ignoring_inline_asm diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.cyclo new file mode 100644 index 0000000..dfd00ca --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.cyclo @@ -0,0 +1,15 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:125:19:HAL_FLASHEx_Erase 9 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:228:19:HAL_FLASHEx_Erase_IT 6 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:297:19:HAL_FLASHEx_OBProgram 11 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:368:6:HAL_FLASHEx_OBGetConfig 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:504:13:FLASH_MassErase 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:551:6:FLASH_PageErase 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:594:6:FLASH_FlushCaches 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:651:26:FLASH_OB_WRPConfig 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:727:26:FLASH_OB_RDPConfig 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:771:26:FLASH_OB_UserConfig 15 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:991:26:FLASH_OB_PCROPConfig 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:1122:13:FLASH_OB_GetWRP 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:1164:17:FLASH_OB_GetRDP 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:1190:17:FLASH_OB_GetUser 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:1213:13:FLASH_OB_GetPCROP 2 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.d new file mode 100644 index 0000000..e70105a --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o new file mode 100644 index 0000000..20692db Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.su new file mode 100644 index 0000000..325086f --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.su @@ -0,0 +1,15 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:125:19:HAL_FLASHEx_Erase 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:228:19:HAL_FLASHEx_Erase_IT 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:297:19:HAL_FLASHEx_OBProgram 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:368:6:HAL_FLASHEx_OBGetConfig 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:504:13:FLASH_MassErase 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:551:6:FLASH_PageErase 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:594:6:FLASH_FlushCaches 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:651:26:FLASH_OB_WRPConfig 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:727:26:FLASH_OB_RDPConfig 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:771:26:FLASH_OB_UserConfig 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:991:26:FLASH_OB_PCROPConfig 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:1122:13:FLASH_OB_GetWRP 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:1164:17:FLASH_OB_GetRDP 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:1190:17:FLASH_OB_GetUser 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c:1213:13:FLASH_OB_GetPCROP 32 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.cyclo new file mode 100644 index 0000000..14a1364 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.cyclo @@ -0,0 +1,2 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c:91:30:HAL_FLASHEx_EnableRunPowerDown 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c:105:30:HAL_FLASHEx_DisableRunPowerDown 1 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.d new file mode 100644 index 0000000..283dec8 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o new file mode 100644 index 0000000..4c5ae46 Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.su new file mode 100644 index 0000000..42f3ccc --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.su @@ -0,0 +1,2 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c:91:30:HAL_FLASHEx_EnableRunPowerDown 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c:105:30:HAL_FLASHEx_DisableRunPowerDown 4 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.cyclo new file mode 100644 index 0000000..f995086 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.cyclo @@ -0,0 +1,8 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:163:6:HAL_GPIO_Init 17 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:307:6:HAL_GPIO_DeInit 9 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:393:15:HAL_GPIO_ReadPin 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:427:6:HAL_GPIO_WritePin 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:449:6:HAL_GPIO_TogglePin 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:474:19:HAL_GPIO_LockPin 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:509:6:HAL_GPIO_EXTI_IRQHandler 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:524:13:HAL_GPIO_EXTI_Callback 1 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.d new file mode 100644 index 0000000..fca93b3 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o new file mode 100644 index 0000000..8b3a0e0 Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.su new file mode 100644 index 0000000..1115745 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.su @@ -0,0 +1,8 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:163:6:HAL_GPIO_Init 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:307:6:HAL_GPIO_DeInit 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:393:15:HAL_GPIO_ReadPin 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:427:6:HAL_GPIO_WritePin 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:449:6:HAL_GPIO_TogglePin 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:474:19:HAL_GPIO_LockPin 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:509:6:HAL_GPIO_EXTI_IRQHandler 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c:524:13:HAL_GPIO_EXTI_Callback 16 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.cyclo new file mode 100644 index 0000000..b2936ae --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.cyclo @@ -0,0 +1,81 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:535:19:HAL_I2C_Init 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:650:19:HAL_I2C_DeInit 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:696:13:HAL_I2C_MspInit 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:712:13:HAL_I2C_MspDeInit 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1119:19:HAL_I2C_Master_Transmit 13 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1260:19:HAL_I2C_Master_Receive 12 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1378:19:HAL_I2C_Slave_Transmit 17 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1565:19:HAL_I2C_Slave_Receive 12 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1695:19:HAL_I2C_Master_Transmit_IT 6 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1785:19:HAL_I2C_Master_Receive_IT 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1854:19:HAL_I2C_Slave_Transmit_IT 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1918:19:HAL_I2C_Slave_Receive_IT 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1970:19:HAL_I2C_Master_Transmit_DMA 9 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2133:19:HAL_I2C_Master_Receive_DMA 8 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2278:19:HAL_I2C_Slave_Transmit_DMA 9 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2414:19:HAL_I2C_Slave_Receive_DMA 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2523:19:HAL_I2C_Mem_Write 15 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2660:19:HAL_I2C_Mem_Read 15 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2797:19:HAL_I2C_Mem_Write_IT 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2885:19:HAL_I2C_Mem_Read_IT 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2972:19:HAL_I2C_Mem_Write_DMA 10 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3118:19:HAL_I2C_Mem_Read_DMA 10 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3263:19:HAL_I2C_IsDeviceReady 14 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3389:19:HAL_I2C_Master_Seq_Transmit_IT 14 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3503:19:HAL_I2C_Master_Seq_Transmit_DMA 19 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3700:19:HAL_I2C_Master_Seq_Receive_IT 9 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3787:19:HAL_I2C_Master_Seq_Receive_DMA 12 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3953:19:HAL_I2C_Slave_Seq_Transmit_IT 11 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4053:19:HAL_I2C_Slave_Seq_Transmit_DMA 17 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4237:19:HAL_I2C_Slave_Seq_Receive_IT 11 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4337:19:HAL_I2C_Slave_Seq_Receive_DMA 17 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4517:19:HAL_I2C_EnableListen_IT 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4541:19:HAL_I2C_DisableListen_IT 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4574:19:HAL_I2C_Master_Abort_IT 6 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4638:6:HAL_I2C_EV_IRQHandler 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4657:6:HAL_I2C_ER_IRQHandler 8 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4709:13:HAL_I2C_MasterTxCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4725:13:HAL_I2C_MasterRxCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4740:13:HAL_I2C_SlaveTxCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4756:13:HAL_I2C_SlaveRxCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4774:13:HAL_I2C_AddrCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4792:13:HAL_I2C_ListenCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4808:13:HAL_I2C_MemTxCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4824:13:HAL_I2C_MemRxCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4840:13:HAL_I2C_ErrorCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4856:13:HAL_I2C_AbortCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4891:22:HAL_I2C_GetState 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4903:21:HAL_I2C_GetMode 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4914:10:HAL_I2C_GetError 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4939:26:I2C_Master_ISR_IT 25 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5098:26:I2C_Mem_ISR_IT 22 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5257:26:I2C_Slave_ISR_IT 25 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5397:26:I2C_Master_ISR_DMA 19 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5545:26:I2C_Mem_ISR_DMA 20 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5709:26:I2C_Slave_ISR_DMA 27 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5853:26:I2C_RequestMemoryWrite 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5908:26:I2C_RequestMemoryRead 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5957:13:I2C_ITAddrCplt 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6052:13:I2C_ITMasterSeqCplt 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6105:13:I2C_ITSlaveSeqCplt 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6179:13:I2C_ITMasterCplt 12 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6322:13:I2C_ITSlaveCplt 26 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6538:13:I2C_ITListenCplt 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6589:13:I2C_ITError 19 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6720:13:I2C_TreatErrorCallback 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6758:13:I2C_Flush_TXDR 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6779:13:I2C_DMAMasterTransmitCplt 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6830:13:I2C_DMASlaveTransmitCplt 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6859:13:I2C_DMAMasterReceiveCplt 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6918:13:I2C_DMASlaveReceiveCplt 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6947:13:I2C_DMAError 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6966:13:I2C_DMAAbort 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6996:26:I2C_WaitOnFlagUntilTimeout 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7036:26:I2C_WaitOnTXISFlagUntilTimeout 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7077:26:I2C_WaitOnSTOPFlagUntilTimeout 6 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7115:26:I2C_WaitOnRXNEFlagUntilTimeout 13 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7192:26:I2C_IsErrorOccurred 17 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7333:13:I2C_TransferConfig 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7360:13:I2C_Enable_IRQ 15 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7451:13:I2C_Disable_IRQ 9 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7514:13:I2C_ConvertOtherXferOptions 3 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.d new file mode 100644 index 0000000..9cea26f --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o new file mode 100644 index 0000000..4ed0fb4 Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.su new file mode 100644 index 0000000..044c966 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.su @@ -0,0 +1,81 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:535:19:HAL_I2C_Init 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:650:19:HAL_I2C_DeInit 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:696:13:HAL_I2C_MspInit 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:712:13:HAL_I2C_MspDeInit 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1119:19:HAL_I2C_Master_Transmit 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1260:19:HAL_I2C_Master_Receive 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1378:19:HAL_I2C_Slave_Transmit 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1565:19:HAL_I2C_Slave_Receive 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1695:19:HAL_I2C_Master_Transmit_IT 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1785:19:HAL_I2C_Master_Receive_IT 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1854:19:HAL_I2C_Slave_Transmit_IT 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1918:19:HAL_I2C_Slave_Receive_IT 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:1970:19:HAL_I2C_Master_Transmit_DMA 48 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2133:19:HAL_I2C_Master_Receive_DMA 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2278:19:HAL_I2C_Slave_Transmit_DMA 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2414:19:HAL_I2C_Slave_Receive_DMA 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2523:19:HAL_I2C_Mem_Write 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2660:19:HAL_I2C_Mem_Read 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2797:19:HAL_I2C_Mem_Write_IT 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2885:19:HAL_I2C_Mem_Read_IT 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:2972:19:HAL_I2C_Mem_Write_DMA 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3118:19:HAL_I2C_Mem_Read_DMA 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3263:19:HAL_I2C_IsDeviceReady 48 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3389:19:HAL_I2C_Master_Seq_Transmit_IT 48 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3503:19:HAL_I2C_Master_Seq_Transmit_DMA 48 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3700:19:HAL_I2C_Master_Seq_Receive_IT 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3787:19:HAL_I2C_Master_Seq_Receive_DMA 48 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:3953:19:HAL_I2C_Slave_Seq_Transmit_IT 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4053:19:HAL_I2C_Slave_Seq_Transmit_DMA 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4237:19:HAL_I2C_Slave_Seq_Receive_IT 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4337:19:HAL_I2C_Slave_Seq_Receive_DMA 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4517:19:HAL_I2C_EnableListen_IT 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4541:19:HAL_I2C_DisableListen_IT 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4574:19:HAL_I2C_Master_Abort_IT 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4638:6:HAL_I2C_EV_IRQHandler 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4657:6:HAL_I2C_ER_IRQHandler 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4709:13:HAL_I2C_MasterTxCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4725:13:HAL_I2C_MasterRxCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4740:13:HAL_I2C_SlaveTxCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4756:13:HAL_I2C_SlaveRxCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4774:13:HAL_I2C_AddrCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4792:13:HAL_I2C_ListenCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4808:13:HAL_I2C_MemTxCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4824:13:HAL_I2C_MemRxCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4840:13:HAL_I2C_ErrorCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4856:13:HAL_I2C_AbortCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4891:22:HAL_I2C_GetState 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4903:21:HAL_I2C_GetMode 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4914:10:HAL_I2C_GetError 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:4939:26:I2C_Master_ISR_IT 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5098:26:I2C_Mem_ISR_IT 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5257:26:I2C_Slave_ISR_IT 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5397:26:I2C_Master_ISR_DMA 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5545:26:I2C_Mem_ISR_DMA 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5709:26:I2C_Slave_ISR_DMA 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5853:26:I2C_RequestMemoryWrite 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5908:26:I2C_RequestMemoryRead 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:5957:13:I2C_ITAddrCplt 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6052:13:I2C_ITMasterSeqCplt 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6105:13:I2C_ITSlaveSeqCplt 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6179:13:I2C_ITMasterCplt 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6322:13:I2C_ITSlaveCplt 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6538:13:I2C_ITListenCplt 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6589:13:I2C_ITError 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6720:13:I2C_TreatErrorCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6758:13:I2C_Flush_TXDR 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6779:13:I2C_DMAMasterTransmitCplt 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6830:13:I2C_DMASlaveTransmitCplt 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6859:13:I2C_DMAMasterReceiveCplt 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6918:13:I2C_DMASlaveReceiveCplt 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6947:13:I2C_DMAError 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6966:13:I2C_DMAAbort 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:6996:26:I2C_WaitOnFlagUntilTimeout 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7036:26:I2C_WaitOnTXISFlagUntilTimeout 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7077:26:I2C_WaitOnSTOPFlagUntilTimeout 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7115:26:I2C_WaitOnRXNEFlagUntilTimeout 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7192:26:I2C_IsErrorOccurred 48 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7333:13:I2C_TransferConfig 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7360:13:I2C_Enable_IRQ 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7451:13:I2C_Disable_IRQ 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c:7514:13:I2C_ConvertOtherXferOptions 16 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.cyclo new file mode 100644 index 0000000..e0aafc9 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.cyclo @@ -0,0 +1,6 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c:96:19:HAL_I2CEx_ConfigAnalogFilter 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c:140:19:HAL_I2CEx_ConfigDigitalFilter 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c:208:19:HAL_I2CEx_EnableWakeUp 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c:247:19:HAL_I2CEx_DisableWakeUp 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c:314:6:HAL_I2CEx_EnableFastModePlus 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c:343:6:HAL_I2CEx_DisableFastModePlus 1 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.d new file mode 100644 index 0000000..c9a8d97 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o new file mode 100644 index 0000000..d1006f7 Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.su new file mode 100644 index 0000000..415666f --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.su @@ -0,0 +1,6 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c:96:19:HAL_I2CEx_ConfigAnalogFilter 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c:140:19:HAL_I2CEx_ConfigDigitalFilter 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c:208:19:HAL_I2CEx_EnableWakeUp 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c:247:19:HAL_I2CEx_DisableWakeUp 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c:314:6:HAL_I2CEx_EnableFastModePlus 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c:343:6:HAL_I2CEx_DisableFastModePlus 24 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.cyclo new file mode 100644 index 0000000..8ed9f24 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.cyclo @@ -0,0 +1,16 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:86:6:HAL_PWR_DeInit 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:104:6:HAL_PWR_EnableBkUpAccess 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:114:6:HAL_PWR_DisableBkUpAccess 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:311:19:HAL_PWR_ConfigPVD 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:357:6:HAL_PWR_EnablePVD 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:366:6:HAL_PWR_DisablePVD 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:391:6:HAL_PWR_EnableWakeUpPin 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:412:6:HAL_PWR_DisableWakeUpPin 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:444:6:HAL_PWR_EnterSLEEPMode 6 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:523:6:HAL_PWR_EnterSTOPMode 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:556:6:HAL_PWR_EnterSTANDBYMode 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:582:6:HAL_PWR_EnableSleepOnExit 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:595:6:HAL_PWR_DisableSleepOnExit 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:609:6:HAL_PWR_EnableSEVOnPend 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:622:6:HAL_PWR_DisableSEVOnPend 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:636:13:HAL_PWR_PVDCallback 1 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.d new file mode 100644 index 0000000..b60413c --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o new file mode 100644 index 0000000..27ac707 Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.su new file mode 100644 index 0000000..6fa1311 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.su @@ -0,0 +1,16 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:86:6:HAL_PWR_DeInit 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:104:6:HAL_PWR_EnableBkUpAccess 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:114:6:HAL_PWR_DisableBkUpAccess 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:311:19:HAL_PWR_ConfigPVD 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:357:6:HAL_PWR_EnablePVD 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:366:6:HAL_PWR_DisablePVD 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:391:6:HAL_PWR_EnableWakeUpPin 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:412:6:HAL_PWR_DisableWakeUpPin 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:444:6:HAL_PWR_EnterSLEEPMode 16 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:523:6:HAL_PWR_EnterSTOPMode 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:556:6:HAL_PWR_EnterSTANDBYMode 4 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:582:6:HAL_PWR_EnableSleepOnExit 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:595:6:HAL_PWR_DisableSleepOnExit 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:609:6:HAL_PWR_EnableSEVOnPend 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:622:6:HAL_PWR_DisableSEVOnPend 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c:636:13:HAL_PWR_PVDCallback 4 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.cyclo new file mode 100644 index 0000000..00f4220 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.cyclo @@ -0,0 +1,34 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:114:10:HAL_PWREx_GetVoltageRange 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:163:19:HAL_PWREx_ControlVoltageScaling 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:282:6:HAL_PWREx_EnableBatteryCharging 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:298:6:HAL_PWREx_DisableBatteryCharging 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:310:6:HAL_PWREx_EnableVddUSB 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:320:6:HAL_PWREx_DisableVddUSB 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:353:6:HAL_PWREx_EnableInternalWakeUpLine 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:363:6:HAL_PWREx_DisableInternalWakeUpLine 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:391:19:HAL_PWREx_EnableGPIOPullUp 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:474:19:HAL_PWREx_DisableGPIOPullUp 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:551:19:HAL_PWREx_EnableGPIOPullDown 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:634:19:HAL_PWREx_DisableGPIOPullDown 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:704:6:HAL_PWREx_EnablePullUpPullDownConfig 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:716:6:HAL_PWREx_DisablePullUpPullDownConfig 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:727:6:HAL_PWREx_EnableSRAM2ContentRetention 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:736:6:HAL_PWREx_DisableSRAM2ContentRetention 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:751:19:HAL_PWREx_SetSRAM2ContentRetention 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:878:6:HAL_PWREx_EnablePVM1 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:887:6:HAL_PWREx_DisablePVM1 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:919:6:HAL_PWREx_EnablePVM3 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:928:6:HAL_PWREx_DisablePVM3 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:938:6:HAL_PWREx_EnablePVM4 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:947:6:HAL_PWREx_DisablePVM4 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:967:19:HAL_PWREx_ConfigPVM 17 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1129:6:HAL_PWREx_EnableLowPowerRunMode 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1144:19:HAL_PWREx_DisableLowPowerRunMode 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1188:6:HAL_PWREx_EnterSTOP0Mode 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1239:6:HAL_PWREx_EnterSTOP1Mode 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1292:6:HAL_PWREx_EnterSTOP2Mode 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1334:6:HAL_PWREx_EnterSHUTDOWNMode 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1359:6:HAL_PWREx_PVD_PVM_IRQHandler 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1415:13:HAL_PWREx_PVM1Callback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1440:13:HAL_PWREx_PVM3Callback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1451:13:HAL_PWREx_PVM4Callback 1 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.d new file mode 100644 index 0000000..bf0dd97 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o new file mode 100644 index 0000000..56e4b5b Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.su new file mode 100644 index 0000000..82c85f5 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.su @@ -0,0 +1,34 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:114:10:HAL_PWREx_GetVoltageRange 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:163:19:HAL_PWREx_ControlVoltageScaling 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:282:6:HAL_PWREx_EnableBatteryCharging 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:298:6:HAL_PWREx_DisableBatteryCharging 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:310:6:HAL_PWREx_EnableVddUSB 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:320:6:HAL_PWREx_DisableVddUSB 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:353:6:HAL_PWREx_EnableInternalWakeUpLine 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:363:6:HAL_PWREx_DisableInternalWakeUpLine 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:391:19:HAL_PWREx_EnableGPIOPullUp 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:474:19:HAL_PWREx_DisableGPIOPullUp 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:551:19:HAL_PWREx_EnableGPIOPullDown 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:634:19:HAL_PWREx_DisableGPIOPullDown 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:704:6:HAL_PWREx_EnablePullUpPullDownConfig 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:716:6:HAL_PWREx_DisablePullUpPullDownConfig 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:727:6:HAL_PWREx_EnableSRAM2ContentRetention 8 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:736:6:HAL_PWREx_DisableSRAM2ContentRetention 8 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:751:19:HAL_PWREx_SetSRAM2ContentRetention 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:878:6:HAL_PWREx_EnablePVM1 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:887:6:HAL_PWREx_DisablePVM1 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:919:6:HAL_PWREx_EnablePVM3 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:928:6:HAL_PWREx_DisablePVM3 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:938:6:HAL_PWREx_EnablePVM4 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:947:6:HAL_PWREx_DisablePVM4 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:967:19:HAL_PWREx_ConfigPVM 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1129:6:HAL_PWREx_EnableLowPowerRunMode 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1144:19:HAL_PWREx_DisableLowPowerRunMode 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1188:6:HAL_PWREx_EnterSTOP0Mode 16 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1239:6:HAL_PWREx_EnterSTOP1Mode 16 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1292:6:HAL_PWREx_EnterSTOP2Mode 16 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1334:6:HAL_PWREx_EnterSHUTDOWNMode 4 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1359:6:HAL_PWREx_PVD_PVM_IRQHandler 8 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1415:13:HAL_PWREx_PVM1Callback 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1440:13:HAL_PWREx_PVM3Callback 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c:1451:13:HAL_PWREx_PVM4Callback 4 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.cyclo new file mode 100644 index 0000000..9a0b6c5 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.cyclo @@ -0,0 +1,15 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:265:19:HAL_RCC_DeInit 8 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:405:19:HAL_RCC_OscConfig 88 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1097:19:HAL_RCC_ClockConfig 22 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1339:6:HAL_RCC_MCOConfig 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1398:10:HAL_RCC_GetSysClockFreq 11 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1486:10:HAL_RCC_GetHCLKFreq 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1497:10:HAL_RCC_GetPCLK1Freq 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1509:10:HAL_RCC_GetPCLK2Freq 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1522:6:HAL_RCC_GetOscConfig 10 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1681:6:HAL_RCC_GetClockConfig 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1716:6:HAL_RCC_EnableCSS 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1726:6:HAL_RCC_NMI_IRQHandler 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1743:13:HAL_RCC_CSSCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1757:10:HAL_RCC_GetResetSource 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1787:26:RCC_SetFlashLatencyFromMSIRange 9 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.d new file mode 100644 index 0000000..a9f3d2c --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o new file mode 100644 index 0000000..e693204 Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.su new file mode 100644 index 0000000..64a7d7a --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.su @@ -0,0 +1,15 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:265:19:HAL_RCC_DeInit 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:405:19:HAL_RCC_OscConfig 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1097:19:HAL_RCC_ClockConfig 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1339:6:HAL_RCC_MCOConfig 48 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1398:10:HAL_RCC_GetSysClockFreq 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1486:10:HAL_RCC_GetHCLKFreq 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1497:10:HAL_RCC_GetPCLK1Freq 8 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1509:10:HAL_RCC_GetPCLK2Freq 8 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1522:6:HAL_RCC_GetOscConfig 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1681:6:HAL_RCC_GetClockConfig 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1716:6:HAL_RCC_EnableCSS 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1726:6:HAL_RCC_NMI_IRQHandler 8 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1743:13:HAL_RCC_CSSCallback 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1757:10:HAL_RCC_GetResetSource 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c:1787:26:RCC_SetFlashLatencyFromMSIRange 32 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.cyclo new file mode 100644 index 0000000..d29ac6a --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.cyclo @@ -0,0 +1,27 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:194:19:HAL_RCCEx_PeriphCLKConfig 47 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:828:6:HAL_RCCEx_GetPeriphCLKConfig 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:1154:10:HAL_RCCEx_GetPeriphCLKFreq 139 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2058:19:HAL_RCCEx_EnablePLLSAI1 6 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2126:19:HAL_RCCEx_DisablePLLSAI1 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2303:6:HAL_RCCEx_WakeUpStopCLKConfig 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2321:6:HAL_RCCEx_StandbyMSIRangeConfig 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2335:6:HAL_RCCEx_EnableLSECSS 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2345:6:HAL_RCCEx_DisableLSECSS 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2358:6:HAL_RCCEx_EnableLSECSS_IT 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2375:6:HAL_RCCEx_LSECSS_IRQHandler 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2392:13:HAL_RCCEx_LSECSS_Callback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2407:6:HAL_RCCEx_EnableLSCO 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2454:6:HAL_RCCEx_DisableLSCO 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2492:6:HAL_RCCEx_EnableMSIPLLMode 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2502:6:HAL_RCCEx_DisableMSIPLLMode 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2599:6:HAL_RCCEx_CRSConfig 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2642:6:HAL_RCCEx_CRSSoftwareSynchronizationGenerate 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2652:6:HAL_RCCEx_CRSGetSynchronizationInfo 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2685:10:HAL_RCCEx_CRSWaitSynchronization 11 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2768:6:HAL_RCCEx_CRS_IRQHandler 12 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2833:13:HAL_RCCEx_CRS_SyncOkCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2844:13:HAL_RCCEx_CRS_SyncWarnCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2855:13:HAL_RCCEx_CRS_ExpectedSyncCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2871:13:HAL_RCCEx_CRS_ErrorCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2907:26:RCCEx_PLLSAI1_Config 23 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:3309:17:RCCEx_GetSAIxPeriphCLKFreq 16 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.d new file mode 100644 index 0000000..31d421a --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o new file mode 100644 index 0000000..676d71f Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.su new file mode 100644 index 0000000..df0b3d2 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.su @@ -0,0 +1,27 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:194:19:HAL_RCCEx_PeriphCLKConfig 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:828:6:HAL_RCCEx_GetPeriphCLKConfig 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:1154:10:HAL_RCCEx_GetPeriphCLKFreq 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2058:19:HAL_RCCEx_EnablePLLSAI1 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2126:19:HAL_RCCEx_DisablePLLSAI1 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2303:6:HAL_RCCEx_WakeUpStopCLKConfig 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2321:6:HAL_RCCEx_StandbyMSIRangeConfig 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2335:6:HAL_RCCEx_EnableLSECSS 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2345:6:HAL_RCCEx_DisableLSECSS 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2358:6:HAL_RCCEx_EnableLSECSS_IT 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2375:6:HAL_RCCEx_LSECSS_IRQHandler 8 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2392:13:HAL_RCCEx_LSECSS_Callback 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2407:6:HAL_RCCEx_EnableLSCO 48 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2454:6:HAL_RCCEx_DisableLSCO 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2492:6:HAL_RCCEx_EnableMSIPLLMode 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2502:6:HAL_RCCEx_DisableMSIPLLMode 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2599:6:HAL_RCCEx_CRSConfig 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2642:6:HAL_RCCEx_CRSSoftwareSynchronizationGenerate 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2652:6:HAL_RCCEx_CRSGetSynchronizationInfo 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2685:10:HAL_RCCEx_CRSWaitSynchronization 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2768:6:HAL_RCCEx_CRS_IRQHandler 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2833:13:HAL_RCCEx_CRS_SyncOkCallback 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2844:13:HAL_RCCEx_CRS_SyncWarnCallback 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2855:13:HAL_RCCEx_CRS_ExpectedSyncCallback 4 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2871:13:HAL_RCCEx_CRS_ErrorCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:2907:26:RCCEx_PLLSAI1_Config 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c:3309:17:RCCEx_GetSAIxPeriphCLKFreq 40 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.cyclo new file mode 100644 index 0000000..a390aca --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.cyclo @@ -0,0 +1,66 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:327:19:HAL_UART_Init 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:402:19:HAL_HalfDuplex_Init 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:477:19:HAL_LIN_Init 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:576:19:HAL_MultiProcessor_Init 6 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:652:19:HAL_UART_DeInit 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:699:13:HAL_UART_MspInit 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:714:13:HAL_UART_MspDeInit 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1145:19:HAL_UART_Transmit 10 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1235:19:HAL_UART_Receive 15 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1319:19:HAL_UART_Transmit_IT 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1402:19:HAL_UART_Receive_IT 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1443:19:HAL_UART_Transmit_DMA 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1513:19:HAL_UART_Receive_DMA 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1549:19:HAL_UART_DMAPause 9 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1579:19:HAL_UART_DMAResume 8 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1610:19:HAL_UART_DMAStop 13 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1685:19:HAL_UART_Abort 15 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1796:19:HAL_UART_AbortTransmit 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1862:19:HAL_UART_AbortReceive 10 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1936:19:HAL_UART_Abort_IT 18 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2096:19:HAL_UART_AbortTransmit_IT 6 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2193:19:HAL_UART_AbortReceive_IT 9 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2291:6:HAL_UART_IRQHandler 54 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2680:13:HAL_UART_TxCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2695:13:HAL_UART_TxHalfCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2710:13:HAL_UART_RxCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2725:13:HAL_UART_RxHalfCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2740:13:HAL_UART_ErrorCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2755:13:HAL_UART_AbortCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2770:13:HAL_UART_AbortTransmitCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2785:13:HAL_UART_AbortReceiveCpltCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2802:13:HAL_UARTEx_RxEventCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2850:6:HAL_UART_ReceiverTimeout_Config 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2865:19:HAL_UART_EnableReceiverTimeout 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2903:19:HAL_UART_DisableReceiverTimeout 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2941:19:HAL_MultiProcessor_EnableMuteMode 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2961:19:HAL_MultiProcessor_DisableMuteMode 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2981:6:HAL_MultiProcessor_EnterMuteMode 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2991:19:HAL_HalfDuplex_EnableTransmitter 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3014:19:HAL_HalfDuplex_EnableReceiver 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3038:19:HAL_LIN_SendBreak 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3083:23:HAL_UART_GetState 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3099:10:HAL_UART_GetError 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3147:19:UART_SetConfig 60 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3402:6:UART_AdvFeatureConfig 10 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3476:19:UART_CheckIdleState 8 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3553:19:UART_WaitOnFlagUntilTimeout 10 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3621:19:UART_Start_Receive_IT 13 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3715:19:UART_Start_Receive_DMA 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3772:13:UART_EndTxTransfer 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3793:13:UART_EndRxTransfer 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3824:13:UART_DMATransmitCplt 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3858:13:UART_DMATxHalfCplt 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3876:13:UART_DMAReceiveCplt 8 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3937:13:UART_DMARxHalfCplt 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3975:13:UART_DMAError 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4015:13:UART_DMAAbortOnError 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4038:13:UART_DMATxAbortCallback 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4095:13:UART_DMARxAbortCallback 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4147:13:UART_DMATxOnlyAbortCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4182:13:UART_DMARxOnlyAbortCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4215:13:UART_TxISR_8BIT 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4248:13:UART_TxISR_16BIT 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4367:13:UART_EndTransmit_IT 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4392:13:UART_RxISR_8BIT 11 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4487:13:UART_RxISR_16BIT 11 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.d new file mode 100644 index 0000000..50b6309 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o new file mode 100644 index 0000000..bb88ba7 Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.su new file mode 100644 index 0000000..c999c11 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.su @@ -0,0 +1,66 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:327:19:HAL_UART_Init 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:402:19:HAL_HalfDuplex_Init 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:477:19:HAL_LIN_Init 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:576:19:HAL_MultiProcessor_Init 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:652:19:HAL_UART_DeInit 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:699:13:HAL_UART_MspInit 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:714:13:HAL_UART_MspDeInit 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1145:19:HAL_UART_Transmit 48 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1235:19:HAL_UART_Receive 48 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1319:19:HAL_UART_Transmit_IT 48 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1402:19:HAL_UART_Receive_IT 48 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1443:19:HAL_UART_Transmit_DMA 48 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1513:19:HAL_UART_Receive_DMA 48 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1549:19:HAL_UART_DMAPause 120 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1579:19:HAL_UART_DMAResume 112 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1610:19:HAL_UART_DMAStop 72 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1685:19:HAL_UART_Abort 136 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1796:19:HAL_UART_AbortTransmit 64 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1862:19:HAL_UART_AbortReceive 112 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:1936:19:HAL_UART_Abort_IT 144 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2096:19:HAL_UART_AbortTransmit_IT 64 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2193:19:HAL_UART_AbortReceive_IT 112 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2291:6:HAL_UART_IRQHandler 240 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2680:13:HAL_UART_TxCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2695:13:HAL_UART_TxHalfCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2710:13:HAL_UART_RxCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2725:13:HAL_UART_RxHalfCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2740:13:HAL_UART_ErrorCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2755:13:HAL_UART_AbortCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2770:13:HAL_UART_AbortTransmitCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2785:13:HAL_UART_AbortReceiveCpltCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2802:13:HAL_UARTEx_RxEventCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2850:6:HAL_UART_ReceiverTimeout_Config 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2865:19:HAL_UART_EnableReceiverTimeout 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2903:19:HAL_UART_DisableReceiverTimeout 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2941:19:HAL_MultiProcessor_EnableMuteMode 40 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2961:19:HAL_MultiProcessor_DisableMuteMode 40 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2981:6:HAL_MultiProcessor_EnterMuteMode 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:2991:19:HAL_HalfDuplex_EnableTransmitter 64 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3014:19:HAL_HalfDuplex_EnableReceiver 64 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3038:19:HAL_LIN_SendBreak 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3083:23:HAL_UART_GetState 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3099:10:HAL_UART_GetError 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3147:19:UART_SetConfig 72 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3402:6:UART_AdvFeatureConfig 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3476:19:UART_CheckIdleState 104 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3553:19:UART_WaitOnFlagUntilTimeout 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3621:19:UART_Start_Receive_IT 96 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3715:19:UART_Start_Receive_DMA 96 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3772:13:UART_EndTxTransfer 40 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3793:13:UART_EndRxTransfer 88 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3824:13:UART_DMATransmitCplt 72 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3858:13:UART_DMATxHalfCplt 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3876:13:UART_DMAReceiveCplt 120 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3937:13:UART_DMARxHalfCplt 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:3975:13:UART_DMAError 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4015:13:UART_DMAAbortOnError 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4038:13:UART_DMATxAbortCallback 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4095:13:UART_DMARxAbortCallback 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4147:13:UART_DMATxOnlyAbortCallback 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4182:13:UART_DMARxOnlyAbortCallback 24 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4215:13:UART_TxISR_8BIT 64 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4248:13:UART_TxISR_16BIT 72 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4367:13:UART_EndTransmit_IT 40 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4392:13:UART_RxISR_8BIT 120 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c:4487:13:UART_RxISR_16BIT 120 static,ignoring_inline_asm diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.cyclo b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.cyclo new file mode 100644 index 0000000..56d26d4 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.cyclo @@ -0,0 +1,13 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:170:19:HAL_RS485Ex_Init 5 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:278:13:HAL_UARTEx_WakeupCallback 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:394:19:HAL_UARTEx_EnableClockStopMode 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:413:19:HAL_UARTEx_DisableClockStopMode 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:441:19:HAL_MultiProcessorEx_AddressLength_Set 2 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:479:19:HAL_UARTEx_StopModeWakeUpSourceConfig 4 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:534:19:HAL_UARTEx_EnableStopMode 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:553:19:HAL_UARTEx_DisableStopMode 3 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:767:19:HAL_UARTEx_ReceiveToIdle 20 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:890:19:HAL_UARTEx_ReceiveToIdle_IT 6 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:947:19:HAL_UARTEx_ReceiveToIdle_DMA 7 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:1015:29:HAL_UARTEx_GetRxEventType 1 +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:1039:13:UARTEx_Wakeup_AddressConfig 1 diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.d b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.d new file mode 100644 index 0000000..70c3989 --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.d @@ -0,0 +1,58 @@ +Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o: \ + ../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h \ + ../Core/Inc/stm32l4xx_hal_conf.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h \ + ../Drivers/CMSIS/Include/core_cm4.h \ + ../Drivers/CMSIS/Include/cmsis_version.h \ + ../Drivers/CMSIS/Include/cmsis_compiler.h \ + ../Drivers/CMSIS/Include/cmsis_gcc.h \ + ../Drivers/CMSIS/Include/mpu_armv7.h \ + ../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h \ + ../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h: +../Core/Inc/stm32l4xx_hal_conf.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l4xx.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h: +../Drivers/CMSIS/Include/core_cm4.h: +../Drivers/CMSIS/Include/cmsis_version.h: +../Drivers/CMSIS/Include/cmsis_compiler.h: +../Drivers/CMSIS/Include/cmsis_gcc.h: +../Drivers/CMSIS/Include/mpu_armv7.h: +../Drivers/CMSIS/Device/ST/STM32L4xx/Include/system_stm32l4xx.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h: +../Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h: diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o new file mode 100644 index 0000000..3823c22 Binary files /dev/null and b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o differ diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.su b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.su new file mode 100644 index 0000000..d9b61fe --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.su @@ -0,0 +1,13 @@ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:170:19:HAL_RS485Ex_Init 32 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:278:13:HAL_UARTEx_WakeupCallback 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:394:19:HAL_UARTEx_EnableClockStopMode 40 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:413:19:HAL_UARTEx_DisableClockStopMode 40 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:441:19:HAL_MultiProcessorEx_AddressLength_Set 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:479:19:HAL_UARTEx_StopModeWakeUpSourceConfig 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:534:19:HAL_UARTEx_EnableStopMode 40 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:553:19:HAL_UARTEx_DisableStopMode 40 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:767:19:HAL_UARTEx_ReceiveToIdle 40 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:890:19:HAL_UARTEx_ReceiveToIdle_IT 56 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:947:19:HAL_UARTEx_ReceiveToIdle_DMA 56 static,ignoring_inline_asm +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:1015:29:HAL_UARTEx_GetRxEventType 16 static +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c:1039:13:UARTEx_Wakeup_AddressConfig 24 static diff --git a/Debug/Drivers/STM32L4xx_HAL_Driver/Src/subdir.mk b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/subdir.mk new file mode 100644 index 0000000..2d3fe6c --- /dev/null +++ b/Debug/Drivers/STM32L4xx_HAL_Driver/Src/subdir.mk @@ -0,0 +1,75 @@ +################################################################################ +# Automatically-generated file. Do not edit! +# Toolchain: GNU Tools for STM32 (13.3.rel1) +################################################################################ + +# Add inputs and outputs from these tool invocations to the build variables +C_SRCS += \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c \ +../Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c + +OBJS += \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + +C_DEPS += \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.d \ +./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.d + + +# Each subdirectory must supply rules for building sources it contributes +Drivers/STM32L4xx_HAL_Driver/Src/%.o Drivers/STM32L4xx_HAL_Driver/Src/%.su Drivers/STM32L4xx_HAL_Driver/Src/%.cyclo: ../Drivers/STM32L4xx_HAL_Driver/Src/%.c Drivers/STM32L4xx_HAL_Driver/Src/subdir.mk + arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DUSE_HAL_DRIVER -DSTM32L452xx -c -I../Core/Inc -I../Drivers/STM32L4xx_HAL_Driver/Inc -I../Drivers/STM32L4xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32L4xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "$@" + +clean: clean-Drivers-2f-STM32L4xx_HAL_Driver-2f-Src + +clean-Drivers-2f-STM32L4xx_HAL_Driver-2f-Src: + -$(RM) ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.su ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.cyclo ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.su + +.PHONY: clean-Drivers-2f-STM32L4xx_HAL_Driver-2f-Src + diff --git a/Debug/makefile b/Debug/makefile new file mode 100644 index 0000000..9be7cf4 --- /dev/null +++ b/Debug/makefile @@ -0,0 +1,94 @@ +################################################################################ +# Automatically-generated file. Do not edit! +# Toolchain: GNU Tools for STM32 (13.3.rel1) +################################################################################ + +-include ../makefile.init + +RM := rm -rf + +# All of the sources participating in the build are defined here +-include sources.mk +-include Drivers/STM32L4xx_HAL_Driver/Src/subdir.mk +-include Core/Startup/subdir.mk +-include Core/Src/subdir.mk +-include objects.mk + +ifneq ($(MAKECMDGOALS),clean) +ifneq ($(strip $(S_DEPS)),) +-include $(S_DEPS) +endif +ifneq ($(strip $(S_UPPER_DEPS)),) +-include $(S_UPPER_DEPS) +endif +ifneq ($(strip $(C_DEPS)),) +-include $(C_DEPS) +endif +endif + +-include ../makefile.defs + +OPTIONAL_TOOL_DEPS := \ +$(wildcard ../makefile.defs) \ +$(wildcard ../makefile.init) \ +$(wildcard ../makefile.targets) \ + + +BUILD_ARTIFACT_NAME := moto-perf +BUILD_ARTIFACT_EXTENSION := elf +BUILD_ARTIFACT_PREFIX := +BUILD_ARTIFACT := $(BUILD_ARTIFACT_PREFIX)$(BUILD_ARTIFACT_NAME)$(if $(BUILD_ARTIFACT_EXTENSION),.$(BUILD_ARTIFACT_EXTENSION),) + +# Add inputs and outputs from these tool invocations to the build variables +EXECUTABLES += \ +moto-perf.elf \ + +MAP_FILES += \ +moto-perf.map \ + +SIZE_OUTPUT += \ +default.size.stdout \ + +OBJDUMP_LIST += \ +moto-perf.list \ + + +# All Target +all: main-build + +# Main-build Target +main-build: moto-perf.elf secondary-outputs + +# Tool invocations +moto-perf.elf moto-perf.map: $(OBJS) $(USER_OBJS) C:\Users\loren\Documents\STM32_Projects\moto-perf\STM32L452RETXP_FLASH.ld makefile objects.list $(OPTIONAL_TOOL_DEPS) + arm-none-eabi-gcc -o "moto-perf.elf" @"objects.list" $(USER_OBJS) $(LIBS) -mcpu=cortex-m4 -T"C:\Users\loren\Documents\STM32_Projects\moto-perf\STM32L452RETXP_FLASH.ld" --specs=nosys.specs -Wl,-Map="moto-perf.map" -Wl,--gc-sections -static -u _printf_float --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -Wl,--start-group -lc -lm -Wl,--end-group + @echo 'Finished building target: $@' + @echo ' ' + +default.size.stdout: $(EXECUTABLES) makefile objects.list $(OPTIONAL_TOOL_DEPS) + arm-none-eabi-size $(EXECUTABLES) + @echo 'Finished building: $@' + @echo ' ' + +moto-perf.list: $(EXECUTABLES) makefile objects.list $(OPTIONAL_TOOL_DEPS) + arm-none-eabi-objdump -h -S $(EXECUTABLES) > "moto-perf.list" + @echo 'Finished building: $@' + @echo ' ' + +# Other Targets +clean: + -$(RM) default.size.stdout moto-perf.elf moto-perf.list moto-perf.map + -@echo ' ' + +secondary-outputs: $(SIZE_OUTPUT) $(OBJDUMP_LIST) + +fail-specified-linker-script-missing: + @echo 'Error: Cannot find the specified linker script. Check the linker settings in the build configuration.' + @exit 2 + +warn-no-linker-script-specified: + @echo 'Warning: No linker script specified. Check the linker settings in the build configuration.' + +.PHONY: all clean dependents main-build fail-specified-linker-script-missing warn-no-linker-script-specified + +-include ../makefile.targets diff --git a/Debug/moto-perf.elf b/Debug/moto-perf.elf new file mode 100644 index 0000000..f206ff0 Binary files /dev/null and b/Debug/moto-perf.elf differ diff --git a/Debug/moto-perf.list b/Debug/moto-perf.list new file mode 100644 index 0000000..e5ea65c --- /dev/null +++ b/Debug/moto-perf.list @@ -0,0 +1,22884 @@ + +moto-perf.elf: file format elf32-littlearm + +Sections: +Idx Name Size VMA LMA File off Algn + 0 .isr_vector 00000194 08000000 08000000 00001000 2**0 + CONTENTS, ALLOC, LOAD, READONLY, DATA + 1 .text 0000b58c 080001a0 080001a0 000011a0 2**4 + CONTENTS, ALLOC, LOAD, READONLY, CODE + 2 .rodata 000009a4 0800b730 0800b730 0000c730 2**3 + CONTENTS, ALLOC, LOAD, READONLY, DATA + 3 .ARM.extab 00000000 0800c0d4 0800c0d4 0000e1d4 2**0 + CONTENTS, READONLY + 4 .ARM 00000008 0800c0d4 0800c0d4 0000d0d4 2**2 + CONTENTS, ALLOC, LOAD, READONLY, DATA + 5 .preinit_array 00000000 0800c0dc 0800c0dc 0000e1d4 2**0 + CONTENTS, ALLOC, LOAD, DATA + 6 .init_array 00000004 0800c0dc 0800c0dc 0000d0dc 2**2 + CONTENTS, ALLOC, LOAD, READONLY, DATA + 7 .fini_array 00000004 0800c0e0 0800c0e0 0000d0e0 2**2 + CONTENTS, ALLOC, LOAD, READONLY, DATA + 8 .data 000001d4 20000000 0800c0e4 0000e000 2**2 + CONTENTS, ALLOC, LOAD, DATA + 9 .bss 0000031c 200001d4 0800c2b8 0000e1d4 2**2 + ALLOC + 10 ._user_heap_stack 00000c00 200004f0 0800c2b8 0000e4f0 2**0 + ALLOC + 11 .ARM.attributes 00000030 00000000 00000000 0000e1d4 2**0 + CONTENTS, READONLY + 12 .debug_info 0001083b 00000000 00000000 0000e204 2**0 + CONTENTS, READONLY, DEBUGGING, OCTETS + 13 .debug_abbrev 00002713 00000000 00000000 0001ea3f 2**0 + CONTENTS, READONLY, DEBUGGING, OCTETS + 14 .debug_aranges 00000ec8 00000000 00000000 00021158 2**3 + CONTENTS, READONLY, DEBUGGING, OCTETS + 15 .debug_rnglists 00000b71 00000000 00000000 00022020 2**0 + CONTENTS, READONLY, DEBUGGING, OCTETS + 16 .debug_macro 0002408b 00000000 00000000 00022b91 2**0 + CONTENTS, READONLY, DEBUGGING, OCTETS + 17 .debug_line 00012411 00000000 00000000 00046c1c 2**0 + CONTENTS, READONLY, DEBUGGING, OCTETS + 18 .debug_str 000d3fc4 00000000 00000000 0005902d 2**0 + CONTENTS, READONLY, DEBUGGING, OCTETS + 19 .comment 00000043 00000000 00000000 0012cff1 2**0 + CONTENTS, READONLY + 20 .debug_frame 00005328 00000000 00000000 0012d034 2**2 + CONTENTS, READONLY, DEBUGGING, OCTETS + 21 .debug_line_str 00000063 00000000 00000000 0013235c 2**0 + CONTENTS, READONLY, DEBUGGING, OCTETS + +Disassembly of section .text: + +080001a0 <__do_global_dtors_aux>: + 80001a0: b510 push {r4, lr} + 80001a2: 4c05 ldr r4, [pc, #20] @ (80001b8 <__do_global_dtors_aux+0x18>) + 80001a4: 7823 ldrb r3, [r4, #0] + 80001a6: b933 cbnz r3, 80001b6 <__do_global_dtors_aux+0x16> + 80001a8: 4b04 ldr r3, [pc, #16] @ (80001bc <__do_global_dtors_aux+0x1c>) + 80001aa: b113 cbz r3, 80001b2 <__do_global_dtors_aux+0x12> + 80001ac: 4804 ldr r0, [pc, #16] @ (80001c0 <__do_global_dtors_aux+0x20>) + 80001ae: f3af 8000 nop.w + 80001b2: 2301 movs r3, #1 + 80001b4: 7023 strb r3, [r4, #0] + 80001b6: bd10 pop {r4, pc} + 80001b8: 200001d4 .word 0x200001d4 + 80001bc: 00000000 .word 0x00000000 + 80001c0: 0800b714 .word 0x0800b714 + +080001c4 : + 80001c4: b508 push {r3, lr} + 80001c6: 4b03 ldr r3, [pc, #12] @ (80001d4 ) + 80001c8: b11b cbz r3, 80001d2 + 80001ca: 4903 ldr r1, [pc, #12] @ (80001d8 ) + 80001cc: 4803 ldr r0, [pc, #12] @ (80001dc ) + 80001ce: f3af 8000 nop.w + 80001d2: bd08 pop {r3, pc} + 80001d4: 00000000 .word 0x00000000 + 80001d8: 200001d8 .word 0x200001d8 + 80001dc: 0800b714 .word 0x0800b714 + +080001e0 : + 80001e0: f001 01ff and.w r1, r1, #255 @ 0xff + 80001e4: 2a10 cmp r2, #16 + 80001e6: db2b blt.n 8000240 + 80001e8: f010 0f07 tst.w r0, #7 + 80001ec: d008 beq.n 8000200 + 80001ee: f810 3b01 ldrb.w r3, [r0], #1 + 80001f2: 3a01 subs r2, #1 + 80001f4: 428b cmp r3, r1 + 80001f6: d02d beq.n 8000254 + 80001f8: f010 0f07 tst.w r0, #7 + 80001fc: b342 cbz r2, 8000250 + 80001fe: d1f6 bne.n 80001ee + 8000200: b4f0 push {r4, r5, r6, r7} + 8000202: ea41 2101 orr.w r1, r1, r1, lsl #8 + 8000206: ea41 4101 orr.w r1, r1, r1, lsl #16 + 800020a: f022 0407 bic.w r4, r2, #7 + 800020e: f07f 0700 mvns.w r7, #0 + 8000212: 2300 movs r3, #0 + 8000214: e8f0 5602 ldrd r5, r6, [r0], #8 + 8000218: 3c08 subs r4, #8 + 800021a: ea85 0501 eor.w r5, r5, r1 + 800021e: ea86 0601 eor.w r6, r6, r1 + 8000222: fa85 f547 uadd8 r5, r5, r7 + 8000226: faa3 f587 sel r5, r3, r7 + 800022a: fa86 f647 uadd8 r6, r6, r7 + 800022e: faa5 f687 sel r6, r5, r7 + 8000232: b98e cbnz r6, 8000258 + 8000234: d1ee bne.n 8000214 + 8000236: bcf0 pop {r4, r5, r6, r7} + 8000238: f001 01ff and.w r1, r1, #255 @ 0xff + 800023c: f002 0207 and.w r2, r2, #7 + 8000240: b132 cbz r2, 8000250 + 8000242: f810 3b01 ldrb.w r3, [r0], #1 + 8000246: 3a01 subs r2, #1 + 8000248: ea83 0301 eor.w r3, r3, r1 + 800024c: b113 cbz r3, 8000254 + 800024e: d1f8 bne.n 8000242 + 8000250: 2000 movs r0, #0 + 8000252: 4770 bx lr + 8000254: 3801 subs r0, #1 + 8000256: 4770 bx lr + 8000258: 2d00 cmp r5, #0 + 800025a: bf06 itte eq + 800025c: 4635 moveq r5, r6 + 800025e: 3803 subeq r0, #3 + 8000260: 3807 subne r0, #7 + 8000262: f015 0f01 tst.w r5, #1 + 8000266: d107 bne.n 8000278 + 8000268: 3001 adds r0, #1 + 800026a: f415 7f80 tst.w r5, #256 @ 0x100 + 800026e: bf02 ittt eq + 8000270: 3001 addeq r0, #1 + 8000272: f415 3fc0 tsteq.w r5, #98304 @ 0x18000 + 8000276: 3001 addeq r0, #1 + 8000278: bcf0 pop {r4, r5, r6, r7} + 800027a: 3801 subs r0, #1 + 800027c: 4770 bx lr + 800027e: bf00 nop + +08000280 : + 8000280: 4603 mov r3, r0 + 8000282: f813 2b01 ldrb.w r2, [r3], #1 + 8000286: 2a00 cmp r2, #0 + 8000288: d1fb bne.n 8000282 + 800028a: 1a18 subs r0, r3, r0 + 800028c: 3801 subs r0, #1 + 800028e: 4770 bx lr + +08000290 <__aeabi_drsub>: + 8000290: f081 4100 eor.w r1, r1, #2147483648 @ 0x80000000 + 8000294: e002 b.n 800029c <__adddf3> + 8000296: bf00 nop + +08000298 <__aeabi_dsub>: + 8000298: f083 4300 eor.w r3, r3, #2147483648 @ 0x80000000 + +0800029c <__adddf3>: + 800029c: b530 push {r4, r5, lr} + 800029e: ea4f 0441 mov.w r4, r1, lsl #1 + 80002a2: ea4f 0543 mov.w r5, r3, lsl #1 + 80002a6: ea94 0f05 teq r4, r5 + 80002aa: bf08 it eq + 80002ac: ea90 0f02 teqeq r0, r2 + 80002b0: bf1f itttt ne + 80002b2: ea54 0c00 orrsne.w ip, r4, r0 + 80002b6: ea55 0c02 orrsne.w ip, r5, r2 + 80002ba: ea7f 5c64 mvnsne.w ip, r4, asr #21 + 80002be: ea7f 5c65 mvnsne.w ip, r5, asr #21 + 80002c2: f000 80e2 beq.w 800048a <__adddf3+0x1ee> + 80002c6: ea4f 5454 mov.w r4, r4, lsr #21 + 80002ca: ebd4 5555 rsbs r5, r4, r5, lsr #21 + 80002ce: bfb8 it lt + 80002d0: 426d neglt r5, r5 + 80002d2: dd0c ble.n 80002ee <__adddf3+0x52> + 80002d4: 442c add r4, r5 + 80002d6: ea80 0202 eor.w r2, r0, r2 + 80002da: ea81 0303 eor.w r3, r1, r3 + 80002de: ea82 0000 eor.w r0, r2, r0 + 80002e2: ea83 0101 eor.w r1, r3, r1 + 80002e6: ea80 0202 eor.w r2, r0, r2 + 80002ea: ea81 0303 eor.w r3, r1, r3 + 80002ee: 2d36 cmp r5, #54 @ 0x36 + 80002f0: bf88 it hi + 80002f2: bd30 pophi {r4, r5, pc} + 80002f4: f011 4f00 tst.w r1, #2147483648 @ 0x80000000 + 80002f8: ea4f 3101 mov.w r1, r1, lsl #12 + 80002fc: f44f 1c80 mov.w ip, #1048576 @ 0x100000 + 8000300: ea4c 3111 orr.w r1, ip, r1, lsr #12 + 8000304: d002 beq.n 800030c <__adddf3+0x70> + 8000306: 4240 negs r0, r0 + 8000308: eb61 0141 sbc.w r1, r1, r1, lsl #1 + 800030c: f013 4f00 tst.w r3, #2147483648 @ 0x80000000 + 8000310: ea4f 3303 mov.w r3, r3, lsl #12 + 8000314: ea4c 3313 orr.w r3, ip, r3, lsr #12 + 8000318: d002 beq.n 8000320 <__adddf3+0x84> + 800031a: 4252 negs r2, r2 + 800031c: eb63 0343 sbc.w r3, r3, r3, lsl #1 + 8000320: ea94 0f05 teq r4, r5 + 8000324: f000 80a7 beq.w 8000476 <__adddf3+0x1da> + 8000328: f1a4 0401 sub.w r4, r4, #1 + 800032c: f1d5 0e20 rsbs lr, r5, #32 + 8000330: db0d blt.n 800034e <__adddf3+0xb2> + 8000332: fa02 fc0e lsl.w ip, r2, lr + 8000336: fa22 f205 lsr.w r2, r2, r5 + 800033a: 1880 adds r0, r0, r2 + 800033c: f141 0100 adc.w r1, r1, #0 + 8000340: fa03 f20e lsl.w r2, r3, lr + 8000344: 1880 adds r0, r0, r2 + 8000346: fa43 f305 asr.w r3, r3, r5 + 800034a: 4159 adcs r1, r3 + 800034c: e00e b.n 800036c <__adddf3+0xd0> + 800034e: f1a5 0520 sub.w r5, r5, #32 + 8000352: f10e 0e20 add.w lr, lr, #32 + 8000356: 2a01 cmp r2, #1 + 8000358: fa03 fc0e lsl.w ip, r3, lr + 800035c: bf28 it cs + 800035e: f04c 0c02 orrcs.w ip, ip, #2 + 8000362: fa43 f305 asr.w r3, r3, r5 + 8000366: 18c0 adds r0, r0, r3 + 8000368: eb51 71e3 adcs.w r1, r1, r3, asr #31 + 800036c: f001 4500 and.w r5, r1, #2147483648 @ 0x80000000 + 8000370: d507 bpl.n 8000382 <__adddf3+0xe6> + 8000372: f04f 0e00 mov.w lr, #0 + 8000376: f1dc 0c00 rsbs ip, ip, #0 + 800037a: eb7e 0000 sbcs.w r0, lr, r0 + 800037e: eb6e 0101 sbc.w r1, lr, r1 + 8000382: f5b1 1f80 cmp.w r1, #1048576 @ 0x100000 + 8000386: d31b bcc.n 80003c0 <__adddf3+0x124> + 8000388: f5b1 1f00 cmp.w r1, #2097152 @ 0x200000 + 800038c: d30c bcc.n 80003a8 <__adddf3+0x10c> + 800038e: 0849 lsrs r1, r1, #1 + 8000390: ea5f 0030 movs.w r0, r0, rrx + 8000394: ea4f 0c3c mov.w ip, ip, rrx + 8000398: f104 0401 add.w r4, r4, #1 + 800039c: ea4f 5244 mov.w r2, r4, lsl #21 + 80003a0: f512 0f80 cmn.w r2, #4194304 @ 0x400000 + 80003a4: f080 809a bcs.w 80004dc <__adddf3+0x240> + 80003a8: f1bc 4f00 cmp.w ip, #2147483648 @ 0x80000000 + 80003ac: bf08 it eq + 80003ae: ea5f 0c50 movseq.w ip, r0, lsr #1 + 80003b2: f150 0000 adcs.w r0, r0, #0 + 80003b6: eb41 5104 adc.w r1, r1, r4, lsl #20 + 80003ba: ea41 0105 orr.w r1, r1, r5 + 80003be: bd30 pop {r4, r5, pc} + 80003c0: ea5f 0c4c movs.w ip, ip, lsl #1 + 80003c4: 4140 adcs r0, r0 + 80003c6: eb41 0101 adc.w r1, r1, r1 + 80003ca: 3c01 subs r4, #1 + 80003cc: bf28 it cs + 80003ce: f5b1 1f80 cmpcs.w r1, #1048576 @ 0x100000 + 80003d2: d2e9 bcs.n 80003a8 <__adddf3+0x10c> + 80003d4: f091 0f00 teq r1, #0 + 80003d8: bf04 itt eq + 80003da: 4601 moveq r1, r0 + 80003dc: 2000 moveq r0, #0 + 80003de: fab1 f381 clz r3, r1 + 80003e2: bf08 it eq + 80003e4: 3320 addeq r3, #32 + 80003e6: f1a3 030b sub.w r3, r3, #11 + 80003ea: f1b3 0220 subs.w r2, r3, #32 + 80003ee: da0c bge.n 800040a <__adddf3+0x16e> + 80003f0: 320c adds r2, #12 + 80003f2: dd08 ble.n 8000406 <__adddf3+0x16a> + 80003f4: f102 0c14 add.w ip, r2, #20 + 80003f8: f1c2 020c rsb r2, r2, #12 + 80003fc: fa01 f00c lsl.w r0, r1, ip + 8000400: fa21 f102 lsr.w r1, r1, r2 + 8000404: e00c b.n 8000420 <__adddf3+0x184> + 8000406: f102 0214 add.w r2, r2, #20 + 800040a: bfd8 it le + 800040c: f1c2 0c20 rsble ip, r2, #32 + 8000410: fa01 f102 lsl.w r1, r1, r2 + 8000414: fa20 fc0c lsr.w ip, r0, ip + 8000418: bfdc itt le + 800041a: ea41 010c orrle.w r1, r1, ip + 800041e: 4090 lslle r0, r2 + 8000420: 1ae4 subs r4, r4, r3 + 8000422: bfa2 ittt ge + 8000424: eb01 5104 addge.w r1, r1, r4, lsl #20 + 8000428: 4329 orrge r1, r5 + 800042a: bd30 popge {r4, r5, pc} + 800042c: ea6f 0404 mvn.w r4, r4 + 8000430: 3c1f subs r4, #31 + 8000432: da1c bge.n 800046e <__adddf3+0x1d2> + 8000434: 340c adds r4, #12 + 8000436: dc0e bgt.n 8000456 <__adddf3+0x1ba> + 8000438: f104 0414 add.w r4, r4, #20 + 800043c: f1c4 0220 rsb r2, r4, #32 + 8000440: fa20 f004 lsr.w r0, r0, r4 + 8000444: fa01 f302 lsl.w r3, r1, r2 + 8000448: ea40 0003 orr.w r0, r0, r3 + 800044c: fa21 f304 lsr.w r3, r1, r4 + 8000450: ea45 0103 orr.w r1, r5, r3 + 8000454: bd30 pop {r4, r5, pc} + 8000456: f1c4 040c rsb r4, r4, #12 + 800045a: f1c4 0220 rsb r2, r4, #32 + 800045e: fa20 f002 lsr.w r0, r0, r2 + 8000462: fa01 f304 lsl.w r3, r1, r4 + 8000466: ea40 0003 orr.w r0, r0, r3 + 800046a: 4629 mov r1, r5 + 800046c: bd30 pop {r4, r5, pc} + 800046e: fa21 f004 lsr.w r0, r1, r4 + 8000472: 4629 mov r1, r5 + 8000474: bd30 pop {r4, r5, pc} + 8000476: f094 0f00 teq r4, #0 + 800047a: f483 1380 eor.w r3, r3, #1048576 @ 0x100000 + 800047e: bf06 itte eq + 8000480: f481 1180 eoreq.w r1, r1, #1048576 @ 0x100000 + 8000484: 3401 addeq r4, #1 + 8000486: 3d01 subne r5, #1 + 8000488: e74e b.n 8000328 <__adddf3+0x8c> + 800048a: ea7f 5c64 mvns.w ip, r4, asr #21 + 800048e: bf18 it ne + 8000490: ea7f 5c65 mvnsne.w ip, r5, asr #21 + 8000494: d029 beq.n 80004ea <__adddf3+0x24e> + 8000496: ea94 0f05 teq r4, r5 + 800049a: bf08 it eq + 800049c: ea90 0f02 teqeq r0, r2 + 80004a0: d005 beq.n 80004ae <__adddf3+0x212> + 80004a2: ea54 0c00 orrs.w ip, r4, r0 + 80004a6: bf04 itt eq + 80004a8: 4619 moveq r1, r3 + 80004aa: 4610 moveq r0, r2 + 80004ac: bd30 pop {r4, r5, pc} + 80004ae: ea91 0f03 teq r1, r3 + 80004b2: bf1e ittt ne + 80004b4: 2100 movne r1, #0 + 80004b6: 2000 movne r0, #0 + 80004b8: bd30 popne {r4, r5, pc} + 80004ba: ea5f 5c54 movs.w ip, r4, lsr #21 + 80004be: d105 bne.n 80004cc <__adddf3+0x230> + 80004c0: 0040 lsls r0, r0, #1 + 80004c2: 4149 adcs r1, r1 + 80004c4: bf28 it cs + 80004c6: f041 4100 orrcs.w r1, r1, #2147483648 @ 0x80000000 + 80004ca: bd30 pop {r4, r5, pc} + 80004cc: f514 0480 adds.w r4, r4, #4194304 @ 0x400000 + 80004d0: bf3c itt cc + 80004d2: f501 1180 addcc.w r1, r1, #1048576 @ 0x100000 + 80004d6: bd30 popcc {r4, r5, pc} + 80004d8: f001 4500 and.w r5, r1, #2147483648 @ 0x80000000 + 80004dc: f045 41fe orr.w r1, r5, #2130706432 @ 0x7f000000 + 80004e0: f441 0170 orr.w r1, r1, #15728640 @ 0xf00000 + 80004e4: f04f 0000 mov.w r0, #0 + 80004e8: bd30 pop {r4, r5, pc} + 80004ea: ea7f 5c64 mvns.w ip, r4, asr #21 + 80004ee: bf1a itte ne + 80004f0: 4619 movne r1, r3 + 80004f2: 4610 movne r0, r2 + 80004f4: ea7f 5c65 mvnseq.w ip, r5, asr #21 + 80004f8: bf1c itt ne + 80004fa: 460b movne r3, r1 + 80004fc: 4602 movne r2, r0 + 80004fe: ea50 3401 orrs.w r4, r0, r1, lsl #12 + 8000502: bf06 itte eq + 8000504: ea52 3503 orrseq.w r5, r2, r3, lsl #12 + 8000508: ea91 0f03 teqeq r1, r3 + 800050c: f441 2100 orrne.w r1, r1, #524288 @ 0x80000 + 8000510: bd30 pop {r4, r5, pc} + 8000512: bf00 nop + +08000514 <__aeabi_ui2d>: + 8000514: f090 0f00 teq r0, #0 + 8000518: bf04 itt eq + 800051a: 2100 moveq r1, #0 + 800051c: 4770 bxeq lr + 800051e: b530 push {r4, r5, lr} + 8000520: f44f 6480 mov.w r4, #1024 @ 0x400 + 8000524: f104 0432 add.w r4, r4, #50 @ 0x32 + 8000528: f04f 0500 mov.w r5, #0 + 800052c: f04f 0100 mov.w r1, #0 + 8000530: e750 b.n 80003d4 <__adddf3+0x138> + 8000532: bf00 nop + +08000534 <__aeabi_i2d>: + 8000534: f090 0f00 teq r0, #0 + 8000538: bf04 itt eq + 800053a: 2100 moveq r1, #0 + 800053c: 4770 bxeq lr + 800053e: b530 push {r4, r5, lr} + 8000540: f44f 6480 mov.w r4, #1024 @ 0x400 + 8000544: f104 0432 add.w r4, r4, #50 @ 0x32 + 8000548: f010 4500 ands.w r5, r0, #2147483648 @ 0x80000000 + 800054c: bf48 it mi + 800054e: 4240 negmi r0, r0 + 8000550: f04f 0100 mov.w r1, #0 + 8000554: e73e b.n 80003d4 <__adddf3+0x138> + 8000556: bf00 nop + +08000558 <__aeabi_f2d>: + 8000558: 0042 lsls r2, r0, #1 + 800055a: ea4f 01e2 mov.w r1, r2, asr #3 + 800055e: ea4f 0131 mov.w r1, r1, rrx + 8000562: ea4f 7002 mov.w r0, r2, lsl #28 + 8000566: bf1f itttt ne + 8000568: f012 437f andsne.w r3, r2, #4278190080 @ 0xff000000 + 800056c: f093 4f7f teqne r3, #4278190080 @ 0xff000000 + 8000570: f081 5160 eorne.w r1, r1, #939524096 @ 0x38000000 + 8000574: 4770 bxne lr + 8000576: f032 427f bics.w r2, r2, #4278190080 @ 0xff000000 + 800057a: bf08 it eq + 800057c: 4770 bxeq lr + 800057e: f093 4f7f teq r3, #4278190080 @ 0xff000000 + 8000582: bf04 itt eq + 8000584: f441 2100 orreq.w r1, r1, #524288 @ 0x80000 + 8000588: 4770 bxeq lr + 800058a: b530 push {r4, r5, lr} + 800058c: f44f 7460 mov.w r4, #896 @ 0x380 + 8000590: f001 4500 and.w r5, r1, #2147483648 @ 0x80000000 + 8000594: f021 4100 bic.w r1, r1, #2147483648 @ 0x80000000 + 8000598: e71c b.n 80003d4 <__adddf3+0x138> + 800059a: bf00 nop + +0800059c <__aeabi_ul2d>: + 800059c: ea50 0201 orrs.w r2, r0, r1 + 80005a0: bf08 it eq + 80005a2: 4770 bxeq lr + 80005a4: b530 push {r4, r5, lr} + 80005a6: f04f 0500 mov.w r5, #0 + 80005aa: e00a b.n 80005c2 <__aeabi_l2d+0x16> + +080005ac <__aeabi_l2d>: + 80005ac: ea50 0201 orrs.w r2, r0, r1 + 80005b0: bf08 it eq + 80005b2: 4770 bxeq lr + 80005b4: b530 push {r4, r5, lr} + 80005b6: f011 4500 ands.w r5, r1, #2147483648 @ 0x80000000 + 80005ba: d502 bpl.n 80005c2 <__aeabi_l2d+0x16> + 80005bc: 4240 negs r0, r0 + 80005be: eb61 0141 sbc.w r1, r1, r1, lsl #1 + 80005c2: f44f 6480 mov.w r4, #1024 @ 0x400 + 80005c6: f104 0432 add.w r4, r4, #50 @ 0x32 + 80005ca: ea5f 5c91 movs.w ip, r1, lsr #22 + 80005ce: f43f aed8 beq.w 8000382 <__adddf3+0xe6> + 80005d2: f04f 0203 mov.w r2, #3 + 80005d6: ea5f 0cdc movs.w ip, ip, lsr #3 + 80005da: bf18 it ne + 80005dc: 3203 addne r2, #3 + 80005de: ea5f 0cdc movs.w ip, ip, lsr #3 + 80005e2: bf18 it ne + 80005e4: 3203 addne r2, #3 + 80005e6: eb02 02dc add.w r2, r2, ip, lsr #3 + 80005ea: f1c2 0320 rsb r3, r2, #32 + 80005ee: fa00 fc03 lsl.w ip, r0, r3 + 80005f2: fa20 f002 lsr.w r0, r0, r2 + 80005f6: fa01 fe03 lsl.w lr, r1, r3 + 80005fa: ea40 000e orr.w r0, r0, lr + 80005fe: fa21 f102 lsr.w r1, r1, r2 + 8000602: 4414 add r4, r2 + 8000604: e6bd b.n 8000382 <__adddf3+0xe6> + 8000606: bf00 nop + +08000608 <__aeabi_dmul>: + 8000608: b570 push {r4, r5, r6, lr} + 800060a: f04f 0cff mov.w ip, #255 @ 0xff + 800060e: f44c 6ce0 orr.w ip, ip, #1792 @ 0x700 + 8000612: ea1c 5411 ands.w r4, ip, r1, lsr #20 + 8000616: bf1d ittte ne + 8000618: ea1c 5513 andsne.w r5, ip, r3, lsr #20 + 800061c: ea94 0f0c teqne r4, ip + 8000620: ea95 0f0c teqne r5, ip + 8000624: f000 f8de bleq 80007e4 <__aeabi_dmul+0x1dc> + 8000628: 442c add r4, r5 + 800062a: ea81 0603 eor.w r6, r1, r3 + 800062e: ea21 514c bic.w r1, r1, ip, lsl #21 + 8000632: ea23 534c bic.w r3, r3, ip, lsl #21 + 8000636: ea50 3501 orrs.w r5, r0, r1, lsl #12 + 800063a: bf18 it ne + 800063c: ea52 3503 orrsne.w r5, r2, r3, lsl #12 + 8000640: f441 1180 orr.w r1, r1, #1048576 @ 0x100000 + 8000644: f443 1380 orr.w r3, r3, #1048576 @ 0x100000 + 8000648: d038 beq.n 80006bc <__aeabi_dmul+0xb4> + 800064a: fba0 ce02 umull ip, lr, r0, r2 + 800064e: f04f 0500 mov.w r5, #0 + 8000652: fbe1 e502 umlal lr, r5, r1, r2 + 8000656: f006 4200 and.w r2, r6, #2147483648 @ 0x80000000 + 800065a: fbe0 e503 umlal lr, r5, r0, r3 + 800065e: f04f 0600 mov.w r6, #0 + 8000662: fbe1 5603 umlal r5, r6, r1, r3 + 8000666: f09c 0f00 teq ip, #0 + 800066a: bf18 it ne + 800066c: f04e 0e01 orrne.w lr, lr, #1 + 8000670: f1a4 04ff sub.w r4, r4, #255 @ 0xff + 8000674: f5b6 7f00 cmp.w r6, #512 @ 0x200 + 8000678: f564 7440 sbc.w r4, r4, #768 @ 0x300 + 800067c: d204 bcs.n 8000688 <__aeabi_dmul+0x80> + 800067e: ea5f 0e4e movs.w lr, lr, lsl #1 + 8000682: 416d adcs r5, r5 + 8000684: eb46 0606 adc.w r6, r6, r6 + 8000688: ea42 21c6 orr.w r1, r2, r6, lsl #11 + 800068c: ea41 5155 orr.w r1, r1, r5, lsr #21 + 8000690: ea4f 20c5 mov.w r0, r5, lsl #11 + 8000694: ea40 505e orr.w r0, r0, lr, lsr #21 + 8000698: ea4f 2ece mov.w lr, lr, lsl #11 + 800069c: f1b4 0cfd subs.w ip, r4, #253 @ 0xfd + 80006a0: bf88 it hi + 80006a2: f5bc 6fe0 cmphi.w ip, #1792 @ 0x700 + 80006a6: d81e bhi.n 80006e6 <__aeabi_dmul+0xde> + 80006a8: f1be 4f00 cmp.w lr, #2147483648 @ 0x80000000 + 80006ac: bf08 it eq + 80006ae: ea5f 0e50 movseq.w lr, r0, lsr #1 + 80006b2: f150 0000 adcs.w r0, r0, #0 + 80006b6: eb41 5104 adc.w r1, r1, r4, lsl #20 + 80006ba: bd70 pop {r4, r5, r6, pc} + 80006bc: f006 4600 and.w r6, r6, #2147483648 @ 0x80000000 + 80006c0: ea46 0101 orr.w r1, r6, r1 + 80006c4: ea40 0002 orr.w r0, r0, r2 + 80006c8: ea81 0103 eor.w r1, r1, r3 + 80006cc: ebb4 045c subs.w r4, r4, ip, lsr #1 + 80006d0: bfc2 ittt gt + 80006d2: ebd4 050c rsbsgt r5, r4, ip + 80006d6: ea41 5104 orrgt.w r1, r1, r4, lsl #20 + 80006da: bd70 popgt {r4, r5, r6, pc} + 80006dc: f441 1180 orr.w r1, r1, #1048576 @ 0x100000 + 80006e0: f04f 0e00 mov.w lr, #0 + 80006e4: 3c01 subs r4, #1 + 80006e6: f300 80ab bgt.w 8000840 <__aeabi_dmul+0x238> + 80006ea: f114 0f36 cmn.w r4, #54 @ 0x36 + 80006ee: bfde ittt le + 80006f0: 2000 movle r0, #0 + 80006f2: f001 4100 andle.w r1, r1, #2147483648 @ 0x80000000 + 80006f6: bd70 pople {r4, r5, r6, pc} + 80006f8: f1c4 0400 rsb r4, r4, #0 + 80006fc: 3c20 subs r4, #32 + 80006fe: da35 bge.n 800076c <__aeabi_dmul+0x164> + 8000700: 340c adds r4, #12 + 8000702: dc1b bgt.n 800073c <__aeabi_dmul+0x134> + 8000704: f104 0414 add.w r4, r4, #20 + 8000708: f1c4 0520 rsb r5, r4, #32 + 800070c: fa00 f305 lsl.w r3, r0, r5 + 8000710: fa20 f004 lsr.w r0, r0, r4 + 8000714: fa01 f205 lsl.w r2, r1, r5 + 8000718: ea40 0002 orr.w r0, r0, r2 + 800071c: f001 4200 and.w r2, r1, #2147483648 @ 0x80000000 + 8000720: f021 4100 bic.w r1, r1, #2147483648 @ 0x80000000 + 8000724: eb10 70d3 adds.w r0, r0, r3, lsr #31 + 8000728: fa21 f604 lsr.w r6, r1, r4 + 800072c: eb42 0106 adc.w r1, r2, r6 + 8000730: ea5e 0e43 orrs.w lr, lr, r3, lsl #1 + 8000734: bf08 it eq + 8000736: ea20 70d3 biceq.w r0, r0, r3, lsr #31 + 800073a: bd70 pop {r4, r5, r6, pc} + 800073c: f1c4 040c rsb r4, r4, #12 + 8000740: f1c4 0520 rsb r5, r4, #32 + 8000744: fa00 f304 lsl.w r3, r0, r4 + 8000748: fa20 f005 lsr.w r0, r0, r5 + 800074c: fa01 f204 lsl.w r2, r1, r4 + 8000750: ea40 0002 orr.w r0, r0, r2 + 8000754: f001 4100 and.w r1, r1, #2147483648 @ 0x80000000 + 8000758: eb10 70d3 adds.w r0, r0, r3, lsr #31 + 800075c: f141 0100 adc.w r1, r1, #0 + 8000760: ea5e 0e43 orrs.w lr, lr, r3, lsl #1 + 8000764: bf08 it eq + 8000766: ea20 70d3 biceq.w r0, r0, r3, lsr #31 + 800076a: bd70 pop {r4, r5, r6, pc} + 800076c: f1c4 0520 rsb r5, r4, #32 + 8000770: fa00 f205 lsl.w r2, r0, r5 + 8000774: ea4e 0e02 orr.w lr, lr, r2 + 8000778: fa20 f304 lsr.w r3, r0, r4 + 800077c: fa01 f205 lsl.w r2, r1, r5 + 8000780: ea43 0302 orr.w r3, r3, r2 + 8000784: fa21 f004 lsr.w r0, r1, r4 + 8000788: f001 4100 and.w r1, r1, #2147483648 @ 0x80000000 + 800078c: fa21 f204 lsr.w r2, r1, r4 + 8000790: ea20 0002 bic.w r0, r0, r2 + 8000794: eb00 70d3 add.w r0, r0, r3, lsr #31 + 8000798: ea5e 0e43 orrs.w lr, lr, r3, lsl #1 + 800079c: bf08 it eq + 800079e: ea20 70d3 biceq.w r0, r0, r3, lsr #31 + 80007a2: bd70 pop {r4, r5, r6, pc} + 80007a4: f094 0f00 teq r4, #0 + 80007a8: d10f bne.n 80007ca <__aeabi_dmul+0x1c2> + 80007aa: f001 4600 and.w r6, r1, #2147483648 @ 0x80000000 + 80007ae: 0040 lsls r0, r0, #1 + 80007b0: eb41 0101 adc.w r1, r1, r1 + 80007b4: f411 1f80 tst.w r1, #1048576 @ 0x100000 + 80007b8: bf08 it eq + 80007ba: 3c01 subeq r4, #1 + 80007bc: d0f7 beq.n 80007ae <__aeabi_dmul+0x1a6> + 80007be: ea41 0106 orr.w r1, r1, r6 + 80007c2: f095 0f00 teq r5, #0 + 80007c6: bf18 it ne + 80007c8: 4770 bxne lr + 80007ca: f003 4600 and.w r6, r3, #2147483648 @ 0x80000000 + 80007ce: 0052 lsls r2, r2, #1 + 80007d0: eb43 0303 adc.w r3, r3, r3 + 80007d4: f413 1f80 tst.w r3, #1048576 @ 0x100000 + 80007d8: bf08 it eq + 80007da: 3d01 subeq r5, #1 + 80007dc: d0f7 beq.n 80007ce <__aeabi_dmul+0x1c6> + 80007de: ea43 0306 orr.w r3, r3, r6 + 80007e2: 4770 bx lr + 80007e4: ea94 0f0c teq r4, ip + 80007e8: ea0c 5513 and.w r5, ip, r3, lsr #20 + 80007ec: bf18 it ne + 80007ee: ea95 0f0c teqne r5, ip + 80007f2: d00c beq.n 800080e <__aeabi_dmul+0x206> + 80007f4: ea50 0641 orrs.w r6, r0, r1, lsl #1 + 80007f8: bf18 it ne + 80007fa: ea52 0643 orrsne.w r6, r2, r3, lsl #1 + 80007fe: d1d1 bne.n 80007a4 <__aeabi_dmul+0x19c> + 8000800: ea81 0103 eor.w r1, r1, r3 + 8000804: f001 4100 and.w r1, r1, #2147483648 @ 0x80000000 + 8000808: f04f 0000 mov.w r0, #0 + 800080c: bd70 pop {r4, r5, r6, pc} + 800080e: ea50 0641 orrs.w r6, r0, r1, lsl #1 + 8000812: bf06 itte eq + 8000814: 4610 moveq r0, r2 + 8000816: 4619 moveq r1, r3 + 8000818: ea52 0643 orrsne.w r6, r2, r3, lsl #1 + 800081c: d019 beq.n 8000852 <__aeabi_dmul+0x24a> + 800081e: ea94 0f0c teq r4, ip + 8000822: d102 bne.n 800082a <__aeabi_dmul+0x222> + 8000824: ea50 3601 orrs.w r6, r0, r1, lsl #12 + 8000828: d113 bne.n 8000852 <__aeabi_dmul+0x24a> + 800082a: ea95 0f0c teq r5, ip + 800082e: d105 bne.n 800083c <__aeabi_dmul+0x234> + 8000830: ea52 3603 orrs.w r6, r2, r3, lsl #12 + 8000834: bf1c itt ne + 8000836: 4610 movne r0, r2 + 8000838: 4619 movne r1, r3 + 800083a: d10a bne.n 8000852 <__aeabi_dmul+0x24a> + 800083c: ea81 0103 eor.w r1, r1, r3 + 8000840: f001 4100 and.w r1, r1, #2147483648 @ 0x80000000 + 8000844: f041 41fe orr.w r1, r1, #2130706432 @ 0x7f000000 + 8000848: f441 0170 orr.w r1, r1, #15728640 @ 0xf00000 + 800084c: f04f 0000 mov.w r0, #0 + 8000850: bd70 pop {r4, r5, r6, pc} + 8000852: f041 41fe orr.w r1, r1, #2130706432 @ 0x7f000000 + 8000856: f441 0178 orr.w r1, r1, #16252928 @ 0xf80000 + 800085a: bd70 pop {r4, r5, r6, pc} + +0800085c <__aeabi_ddiv>: + 800085c: b570 push {r4, r5, r6, lr} + 800085e: f04f 0cff mov.w ip, #255 @ 0xff + 8000862: f44c 6ce0 orr.w ip, ip, #1792 @ 0x700 + 8000866: ea1c 5411 ands.w r4, ip, r1, lsr #20 + 800086a: bf1d ittte ne + 800086c: ea1c 5513 andsne.w r5, ip, r3, lsr #20 + 8000870: ea94 0f0c teqne r4, ip + 8000874: ea95 0f0c teqne r5, ip + 8000878: f000 f8a7 bleq 80009ca <__aeabi_ddiv+0x16e> + 800087c: eba4 0405 sub.w r4, r4, r5 + 8000880: ea81 0e03 eor.w lr, r1, r3 + 8000884: ea52 3503 orrs.w r5, r2, r3, lsl #12 + 8000888: ea4f 3101 mov.w r1, r1, lsl #12 + 800088c: f000 8088 beq.w 80009a0 <__aeabi_ddiv+0x144> + 8000890: ea4f 3303 mov.w r3, r3, lsl #12 + 8000894: f04f 5580 mov.w r5, #268435456 @ 0x10000000 + 8000898: ea45 1313 orr.w r3, r5, r3, lsr #4 + 800089c: ea43 6312 orr.w r3, r3, r2, lsr #24 + 80008a0: ea4f 2202 mov.w r2, r2, lsl #8 + 80008a4: ea45 1511 orr.w r5, r5, r1, lsr #4 + 80008a8: ea45 6510 orr.w r5, r5, r0, lsr #24 + 80008ac: ea4f 2600 mov.w r6, r0, lsl #8 + 80008b0: f00e 4100 and.w r1, lr, #2147483648 @ 0x80000000 + 80008b4: 429d cmp r5, r3 + 80008b6: bf08 it eq + 80008b8: 4296 cmpeq r6, r2 + 80008ba: f144 04fd adc.w r4, r4, #253 @ 0xfd + 80008be: f504 7440 add.w r4, r4, #768 @ 0x300 + 80008c2: d202 bcs.n 80008ca <__aeabi_ddiv+0x6e> + 80008c4: 085b lsrs r3, r3, #1 + 80008c6: ea4f 0232 mov.w r2, r2, rrx + 80008ca: 1ab6 subs r6, r6, r2 + 80008cc: eb65 0503 sbc.w r5, r5, r3 + 80008d0: 085b lsrs r3, r3, #1 + 80008d2: ea4f 0232 mov.w r2, r2, rrx + 80008d6: f44f 1080 mov.w r0, #1048576 @ 0x100000 + 80008da: f44f 2c00 mov.w ip, #524288 @ 0x80000 + 80008de: ebb6 0e02 subs.w lr, r6, r2 + 80008e2: eb75 0e03 sbcs.w lr, r5, r3 + 80008e6: bf22 ittt cs + 80008e8: 1ab6 subcs r6, r6, r2 + 80008ea: 4675 movcs r5, lr + 80008ec: ea40 000c orrcs.w r0, r0, ip + 80008f0: 085b lsrs r3, r3, #1 + 80008f2: ea4f 0232 mov.w r2, r2, rrx + 80008f6: ebb6 0e02 subs.w lr, r6, r2 + 80008fa: eb75 0e03 sbcs.w lr, r5, r3 + 80008fe: bf22 ittt cs + 8000900: 1ab6 subcs r6, r6, r2 + 8000902: 4675 movcs r5, lr + 8000904: ea40 005c orrcs.w r0, r0, ip, lsr #1 + 8000908: 085b lsrs r3, r3, #1 + 800090a: ea4f 0232 mov.w r2, r2, rrx + 800090e: ebb6 0e02 subs.w lr, r6, r2 + 8000912: eb75 0e03 sbcs.w lr, r5, r3 + 8000916: bf22 ittt cs + 8000918: 1ab6 subcs r6, r6, r2 + 800091a: 4675 movcs r5, lr + 800091c: ea40 009c orrcs.w r0, r0, ip, lsr #2 + 8000920: 085b lsrs r3, r3, #1 + 8000922: ea4f 0232 mov.w r2, r2, rrx + 8000926: ebb6 0e02 subs.w lr, r6, r2 + 800092a: eb75 0e03 sbcs.w lr, r5, r3 + 800092e: bf22 ittt cs + 8000930: 1ab6 subcs r6, r6, r2 + 8000932: 4675 movcs r5, lr + 8000934: ea40 00dc orrcs.w r0, r0, ip, lsr #3 + 8000938: ea55 0e06 orrs.w lr, r5, r6 + 800093c: d018 beq.n 8000970 <__aeabi_ddiv+0x114> + 800093e: ea4f 1505 mov.w r5, r5, lsl #4 + 8000942: ea45 7516 orr.w r5, r5, r6, lsr #28 + 8000946: ea4f 1606 mov.w r6, r6, lsl #4 + 800094a: ea4f 03c3 mov.w r3, r3, lsl #3 + 800094e: ea43 7352 orr.w r3, r3, r2, lsr #29 + 8000952: ea4f 02c2 mov.w r2, r2, lsl #3 + 8000956: ea5f 1c1c movs.w ip, ip, lsr #4 + 800095a: d1c0 bne.n 80008de <__aeabi_ddiv+0x82> + 800095c: f411 1f80 tst.w r1, #1048576 @ 0x100000 + 8000960: d10b bne.n 800097a <__aeabi_ddiv+0x11e> + 8000962: ea41 0100 orr.w r1, r1, r0 + 8000966: f04f 0000 mov.w r0, #0 + 800096a: f04f 4c00 mov.w ip, #2147483648 @ 0x80000000 + 800096e: e7b6 b.n 80008de <__aeabi_ddiv+0x82> + 8000970: f411 1f80 tst.w r1, #1048576 @ 0x100000 + 8000974: bf04 itt eq + 8000976: 4301 orreq r1, r0 + 8000978: 2000 moveq r0, #0 + 800097a: f1b4 0cfd subs.w ip, r4, #253 @ 0xfd + 800097e: bf88 it hi + 8000980: f5bc 6fe0 cmphi.w ip, #1792 @ 0x700 + 8000984: f63f aeaf bhi.w 80006e6 <__aeabi_dmul+0xde> + 8000988: ebb5 0c03 subs.w ip, r5, r3 + 800098c: bf04 itt eq + 800098e: ebb6 0c02 subseq.w ip, r6, r2 + 8000992: ea5f 0c50 movseq.w ip, r0, lsr #1 + 8000996: f150 0000 adcs.w r0, r0, #0 + 800099a: eb41 5104 adc.w r1, r1, r4, lsl #20 + 800099e: bd70 pop {r4, r5, r6, pc} + 80009a0: f00e 4e00 and.w lr, lr, #2147483648 @ 0x80000000 + 80009a4: ea4e 3111 orr.w r1, lr, r1, lsr #12 + 80009a8: eb14 045c adds.w r4, r4, ip, lsr #1 + 80009ac: bfc2 ittt gt + 80009ae: ebd4 050c rsbsgt r5, r4, ip + 80009b2: ea41 5104 orrgt.w r1, r1, r4, lsl #20 + 80009b6: bd70 popgt {r4, r5, r6, pc} + 80009b8: f441 1180 orr.w r1, r1, #1048576 @ 0x100000 + 80009bc: f04f 0e00 mov.w lr, #0 + 80009c0: 3c01 subs r4, #1 + 80009c2: e690 b.n 80006e6 <__aeabi_dmul+0xde> + 80009c4: ea45 0e06 orr.w lr, r5, r6 + 80009c8: e68d b.n 80006e6 <__aeabi_dmul+0xde> + 80009ca: ea0c 5513 and.w r5, ip, r3, lsr #20 + 80009ce: ea94 0f0c teq r4, ip + 80009d2: bf08 it eq + 80009d4: ea95 0f0c teqeq r5, ip + 80009d8: f43f af3b beq.w 8000852 <__aeabi_dmul+0x24a> + 80009dc: ea94 0f0c teq r4, ip + 80009e0: d10a bne.n 80009f8 <__aeabi_ddiv+0x19c> + 80009e2: ea50 3401 orrs.w r4, r0, r1, lsl #12 + 80009e6: f47f af34 bne.w 8000852 <__aeabi_dmul+0x24a> + 80009ea: ea95 0f0c teq r5, ip + 80009ee: f47f af25 bne.w 800083c <__aeabi_dmul+0x234> + 80009f2: 4610 mov r0, r2 + 80009f4: 4619 mov r1, r3 + 80009f6: e72c b.n 8000852 <__aeabi_dmul+0x24a> + 80009f8: ea95 0f0c teq r5, ip + 80009fc: d106 bne.n 8000a0c <__aeabi_ddiv+0x1b0> + 80009fe: ea52 3503 orrs.w r5, r2, r3, lsl #12 + 8000a02: f43f aefd beq.w 8000800 <__aeabi_dmul+0x1f8> + 8000a06: 4610 mov r0, r2 + 8000a08: 4619 mov r1, r3 + 8000a0a: e722 b.n 8000852 <__aeabi_dmul+0x24a> + 8000a0c: ea50 0641 orrs.w r6, r0, r1, lsl #1 + 8000a10: bf18 it ne + 8000a12: ea52 0643 orrsne.w r6, r2, r3, lsl #1 + 8000a16: f47f aec5 bne.w 80007a4 <__aeabi_dmul+0x19c> + 8000a1a: ea50 0441 orrs.w r4, r0, r1, lsl #1 + 8000a1e: f47f af0d bne.w 800083c <__aeabi_dmul+0x234> + 8000a22: ea52 0543 orrs.w r5, r2, r3, lsl #1 + 8000a26: f47f aeeb bne.w 8000800 <__aeabi_dmul+0x1f8> + 8000a2a: e712 b.n 8000852 <__aeabi_dmul+0x24a> + +08000a2c <__gedf2>: + 8000a2c: f04f 3cff mov.w ip, #4294967295 + 8000a30: e006 b.n 8000a40 <__cmpdf2+0x4> + 8000a32: bf00 nop + +08000a34 <__ledf2>: + 8000a34: f04f 0c01 mov.w ip, #1 + 8000a38: e002 b.n 8000a40 <__cmpdf2+0x4> + 8000a3a: bf00 nop + +08000a3c <__cmpdf2>: + 8000a3c: f04f 0c01 mov.w ip, #1 + 8000a40: f84d cd04 str.w ip, [sp, #-4]! + 8000a44: ea4f 0c41 mov.w ip, r1, lsl #1 + 8000a48: ea7f 5c6c mvns.w ip, ip, asr #21 + 8000a4c: ea4f 0c43 mov.w ip, r3, lsl #1 + 8000a50: bf18 it ne + 8000a52: ea7f 5c6c mvnsne.w ip, ip, asr #21 + 8000a56: d01b beq.n 8000a90 <__cmpdf2+0x54> + 8000a58: b001 add sp, #4 + 8000a5a: ea50 0c41 orrs.w ip, r0, r1, lsl #1 + 8000a5e: bf0c ite eq + 8000a60: ea52 0c43 orrseq.w ip, r2, r3, lsl #1 + 8000a64: ea91 0f03 teqne r1, r3 + 8000a68: bf02 ittt eq + 8000a6a: ea90 0f02 teqeq r0, r2 + 8000a6e: 2000 moveq r0, #0 + 8000a70: 4770 bxeq lr + 8000a72: f110 0f00 cmn.w r0, #0 + 8000a76: ea91 0f03 teq r1, r3 + 8000a7a: bf58 it pl + 8000a7c: 4299 cmppl r1, r3 + 8000a7e: bf08 it eq + 8000a80: 4290 cmpeq r0, r2 + 8000a82: bf2c ite cs + 8000a84: 17d8 asrcs r0, r3, #31 + 8000a86: ea6f 70e3 mvncc.w r0, r3, asr #31 + 8000a8a: f040 0001 orr.w r0, r0, #1 + 8000a8e: 4770 bx lr + 8000a90: ea4f 0c41 mov.w ip, r1, lsl #1 + 8000a94: ea7f 5c6c mvns.w ip, ip, asr #21 + 8000a98: d102 bne.n 8000aa0 <__cmpdf2+0x64> + 8000a9a: ea50 3c01 orrs.w ip, r0, r1, lsl #12 + 8000a9e: d107 bne.n 8000ab0 <__cmpdf2+0x74> + 8000aa0: ea4f 0c43 mov.w ip, r3, lsl #1 + 8000aa4: ea7f 5c6c mvns.w ip, ip, asr #21 + 8000aa8: d1d6 bne.n 8000a58 <__cmpdf2+0x1c> + 8000aaa: ea52 3c03 orrs.w ip, r2, r3, lsl #12 + 8000aae: d0d3 beq.n 8000a58 <__cmpdf2+0x1c> + 8000ab0: f85d 0b04 ldr.w r0, [sp], #4 + 8000ab4: 4770 bx lr + 8000ab6: bf00 nop + +08000ab8 <__aeabi_cdrcmple>: + 8000ab8: 4684 mov ip, r0 + 8000aba: 4610 mov r0, r2 + 8000abc: 4662 mov r2, ip + 8000abe: 468c mov ip, r1 + 8000ac0: 4619 mov r1, r3 + 8000ac2: 4663 mov r3, ip + 8000ac4: e000 b.n 8000ac8 <__aeabi_cdcmpeq> + 8000ac6: bf00 nop + +08000ac8 <__aeabi_cdcmpeq>: + 8000ac8: b501 push {r0, lr} + 8000aca: f7ff ffb7 bl 8000a3c <__cmpdf2> + 8000ace: 2800 cmp r0, #0 + 8000ad0: bf48 it mi + 8000ad2: f110 0f00 cmnmi.w r0, #0 + 8000ad6: bd01 pop {r0, pc} + +08000ad8 <__aeabi_dcmpeq>: + 8000ad8: f84d ed08 str.w lr, [sp, #-8]! + 8000adc: f7ff fff4 bl 8000ac8 <__aeabi_cdcmpeq> + 8000ae0: bf0c ite eq + 8000ae2: 2001 moveq r0, #1 + 8000ae4: 2000 movne r0, #0 + 8000ae6: f85d fb08 ldr.w pc, [sp], #8 + 8000aea: bf00 nop + +08000aec <__aeabi_dcmplt>: + 8000aec: f84d ed08 str.w lr, [sp, #-8]! + 8000af0: f7ff ffea bl 8000ac8 <__aeabi_cdcmpeq> + 8000af4: bf34 ite cc + 8000af6: 2001 movcc r0, #1 + 8000af8: 2000 movcs r0, #0 + 8000afa: f85d fb08 ldr.w pc, [sp], #8 + 8000afe: bf00 nop + +08000b00 <__aeabi_dcmple>: + 8000b00: f84d ed08 str.w lr, [sp, #-8]! + 8000b04: f7ff ffe0 bl 8000ac8 <__aeabi_cdcmpeq> + 8000b08: bf94 ite ls + 8000b0a: 2001 movls r0, #1 + 8000b0c: 2000 movhi r0, #0 + 8000b0e: f85d fb08 ldr.w pc, [sp], #8 + 8000b12: bf00 nop + +08000b14 <__aeabi_dcmpge>: + 8000b14: f84d ed08 str.w lr, [sp, #-8]! + 8000b18: f7ff ffce bl 8000ab8 <__aeabi_cdrcmple> + 8000b1c: bf94 ite ls + 8000b1e: 2001 movls r0, #1 + 8000b20: 2000 movhi r0, #0 + 8000b22: f85d fb08 ldr.w pc, [sp], #8 + 8000b26: bf00 nop + +08000b28 <__aeabi_dcmpgt>: + 8000b28: f84d ed08 str.w lr, [sp, #-8]! + 8000b2c: f7ff ffc4 bl 8000ab8 <__aeabi_cdrcmple> + 8000b30: bf34 ite cc + 8000b32: 2001 movcc r0, #1 + 8000b34: 2000 movcs r0, #0 + 8000b36: f85d fb08 ldr.w pc, [sp], #8 + 8000b3a: bf00 nop + +08000b3c <__aeabi_dcmpun>: + 8000b3c: ea4f 0c41 mov.w ip, r1, lsl #1 + 8000b40: ea7f 5c6c mvns.w ip, ip, asr #21 + 8000b44: d102 bne.n 8000b4c <__aeabi_dcmpun+0x10> + 8000b46: ea50 3c01 orrs.w ip, r0, r1, lsl #12 + 8000b4a: d10a bne.n 8000b62 <__aeabi_dcmpun+0x26> + 8000b4c: ea4f 0c43 mov.w ip, r3, lsl #1 + 8000b50: ea7f 5c6c mvns.w ip, ip, asr #21 + 8000b54: d102 bne.n 8000b5c <__aeabi_dcmpun+0x20> + 8000b56: ea52 3c03 orrs.w ip, r2, r3, lsl #12 + 8000b5a: d102 bne.n 8000b62 <__aeabi_dcmpun+0x26> + 8000b5c: f04f 0000 mov.w r0, #0 + 8000b60: 4770 bx lr + 8000b62: f04f 0001 mov.w r0, #1 + 8000b66: 4770 bx lr + +08000b68 <__aeabi_d2iz>: + 8000b68: ea4f 0241 mov.w r2, r1, lsl #1 + 8000b6c: f512 1200 adds.w r2, r2, #2097152 @ 0x200000 + 8000b70: d215 bcs.n 8000b9e <__aeabi_d2iz+0x36> + 8000b72: d511 bpl.n 8000b98 <__aeabi_d2iz+0x30> + 8000b74: f46f 7378 mvn.w r3, #992 @ 0x3e0 + 8000b78: ebb3 5262 subs.w r2, r3, r2, asr #21 + 8000b7c: d912 bls.n 8000ba4 <__aeabi_d2iz+0x3c> + 8000b7e: ea4f 23c1 mov.w r3, r1, lsl #11 + 8000b82: f043 4300 orr.w r3, r3, #2147483648 @ 0x80000000 + 8000b86: ea43 5350 orr.w r3, r3, r0, lsr #21 + 8000b8a: f011 4f00 tst.w r1, #2147483648 @ 0x80000000 + 8000b8e: fa23 f002 lsr.w r0, r3, r2 + 8000b92: bf18 it ne + 8000b94: 4240 negne r0, r0 + 8000b96: 4770 bx lr + 8000b98: f04f 0000 mov.w r0, #0 + 8000b9c: 4770 bx lr + 8000b9e: ea50 3001 orrs.w r0, r0, r1, lsl #12 + 8000ba2: d105 bne.n 8000bb0 <__aeabi_d2iz+0x48> + 8000ba4: f011 4000 ands.w r0, r1, #2147483648 @ 0x80000000 + 8000ba8: bf08 it eq + 8000baa: f06f 4000 mvneq.w r0, #2147483648 @ 0x80000000 + 8000bae: 4770 bx lr + 8000bb0: f04f 0000 mov.w r0, #0 + 8000bb4: 4770 bx lr + 8000bb6: bf00 nop + +08000bb8 <__aeabi_uldivmod>: + 8000bb8: b953 cbnz r3, 8000bd0 <__aeabi_uldivmod+0x18> + 8000bba: b94a cbnz r2, 8000bd0 <__aeabi_uldivmod+0x18> + 8000bbc: 2900 cmp r1, #0 + 8000bbe: bf08 it eq + 8000bc0: 2800 cmpeq r0, #0 + 8000bc2: bf1c itt ne + 8000bc4: f04f 31ff movne.w r1, #4294967295 + 8000bc8: f04f 30ff movne.w r0, #4294967295 + 8000bcc: f000 b988 b.w 8000ee0 <__aeabi_idiv0> + 8000bd0: f1ad 0c08 sub.w ip, sp, #8 + 8000bd4: e96d ce04 strd ip, lr, [sp, #-16]! + 8000bd8: f000 f806 bl 8000be8 <__udivmoddi4> + 8000bdc: f8dd e004 ldr.w lr, [sp, #4] + 8000be0: e9dd 2302 ldrd r2, r3, [sp, #8] + 8000be4: b004 add sp, #16 + 8000be6: 4770 bx lr + +08000be8 <__udivmoddi4>: + 8000be8: e92d 47f0 stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, lr} + 8000bec: 9d08 ldr r5, [sp, #32] + 8000bee: 468e mov lr, r1 + 8000bf0: 4604 mov r4, r0 + 8000bf2: 4688 mov r8, r1 + 8000bf4: 2b00 cmp r3, #0 + 8000bf6: d14a bne.n 8000c8e <__udivmoddi4+0xa6> + 8000bf8: 428a cmp r2, r1 + 8000bfa: 4617 mov r7, r2 + 8000bfc: d962 bls.n 8000cc4 <__udivmoddi4+0xdc> + 8000bfe: fab2 f682 clz r6, r2 + 8000c02: b14e cbz r6, 8000c18 <__udivmoddi4+0x30> + 8000c04: f1c6 0320 rsb r3, r6, #32 + 8000c08: fa01 f806 lsl.w r8, r1, r6 + 8000c0c: fa20 f303 lsr.w r3, r0, r3 + 8000c10: 40b7 lsls r7, r6 + 8000c12: ea43 0808 orr.w r8, r3, r8 + 8000c16: 40b4 lsls r4, r6 + 8000c18: ea4f 4e17 mov.w lr, r7, lsr #16 + 8000c1c: fa1f fc87 uxth.w ip, r7 + 8000c20: fbb8 f1fe udiv r1, r8, lr + 8000c24: 0c23 lsrs r3, r4, #16 + 8000c26: fb0e 8811 mls r8, lr, r1, r8 + 8000c2a: ea43 4308 orr.w r3, r3, r8, lsl #16 + 8000c2e: fb01 f20c mul.w r2, r1, ip + 8000c32: 429a cmp r2, r3 + 8000c34: d909 bls.n 8000c4a <__udivmoddi4+0x62> + 8000c36: 18fb adds r3, r7, r3 + 8000c38: f101 30ff add.w r0, r1, #4294967295 + 8000c3c: f080 80ea bcs.w 8000e14 <__udivmoddi4+0x22c> + 8000c40: 429a cmp r2, r3 + 8000c42: f240 80e7 bls.w 8000e14 <__udivmoddi4+0x22c> + 8000c46: 3902 subs r1, #2 + 8000c48: 443b add r3, r7 + 8000c4a: 1a9a subs r2, r3, r2 + 8000c4c: b2a3 uxth r3, r4 + 8000c4e: fbb2 f0fe udiv r0, r2, lr + 8000c52: fb0e 2210 mls r2, lr, r0, r2 + 8000c56: ea43 4302 orr.w r3, r3, r2, lsl #16 + 8000c5a: fb00 fc0c mul.w ip, r0, ip + 8000c5e: 459c cmp ip, r3 + 8000c60: d909 bls.n 8000c76 <__udivmoddi4+0x8e> + 8000c62: 18fb adds r3, r7, r3 + 8000c64: f100 32ff add.w r2, r0, #4294967295 + 8000c68: f080 80d6 bcs.w 8000e18 <__udivmoddi4+0x230> + 8000c6c: 459c cmp ip, r3 + 8000c6e: f240 80d3 bls.w 8000e18 <__udivmoddi4+0x230> + 8000c72: 443b add r3, r7 + 8000c74: 3802 subs r0, #2 + 8000c76: ea40 4001 orr.w r0, r0, r1, lsl #16 + 8000c7a: eba3 030c sub.w r3, r3, ip + 8000c7e: 2100 movs r1, #0 + 8000c80: b11d cbz r5, 8000c8a <__udivmoddi4+0xa2> + 8000c82: 40f3 lsrs r3, r6 + 8000c84: 2200 movs r2, #0 + 8000c86: e9c5 3200 strd r3, r2, [r5] + 8000c8a: e8bd 87f0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, pc} + 8000c8e: 428b cmp r3, r1 + 8000c90: d905 bls.n 8000c9e <__udivmoddi4+0xb6> + 8000c92: b10d cbz r5, 8000c98 <__udivmoddi4+0xb0> + 8000c94: e9c5 0100 strd r0, r1, [r5] + 8000c98: 2100 movs r1, #0 + 8000c9a: 4608 mov r0, r1 + 8000c9c: e7f5 b.n 8000c8a <__udivmoddi4+0xa2> + 8000c9e: fab3 f183 clz r1, r3 + 8000ca2: 2900 cmp r1, #0 + 8000ca4: d146 bne.n 8000d34 <__udivmoddi4+0x14c> + 8000ca6: 4573 cmp r3, lr + 8000ca8: d302 bcc.n 8000cb0 <__udivmoddi4+0xc8> + 8000caa: 4282 cmp r2, r0 + 8000cac: f200 8105 bhi.w 8000eba <__udivmoddi4+0x2d2> + 8000cb0: 1a84 subs r4, r0, r2 + 8000cb2: eb6e 0203 sbc.w r2, lr, r3 + 8000cb6: 2001 movs r0, #1 + 8000cb8: 4690 mov r8, r2 + 8000cba: 2d00 cmp r5, #0 + 8000cbc: d0e5 beq.n 8000c8a <__udivmoddi4+0xa2> + 8000cbe: e9c5 4800 strd r4, r8, [r5] + 8000cc2: e7e2 b.n 8000c8a <__udivmoddi4+0xa2> + 8000cc4: 2a00 cmp r2, #0 + 8000cc6: f000 8090 beq.w 8000dea <__udivmoddi4+0x202> + 8000cca: fab2 f682 clz r6, r2 + 8000cce: 2e00 cmp r6, #0 + 8000cd0: f040 80a4 bne.w 8000e1c <__udivmoddi4+0x234> + 8000cd4: 1a8a subs r2, r1, r2 + 8000cd6: 0c03 lsrs r3, r0, #16 + 8000cd8: ea4f 4e17 mov.w lr, r7, lsr #16 + 8000cdc: b280 uxth r0, r0 + 8000cde: b2bc uxth r4, r7 + 8000ce0: 2101 movs r1, #1 + 8000ce2: fbb2 fcfe udiv ip, r2, lr + 8000ce6: fb0e 221c mls r2, lr, ip, r2 + 8000cea: ea43 4302 orr.w r3, r3, r2, lsl #16 + 8000cee: fb04 f20c mul.w r2, r4, ip + 8000cf2: 429a cmp r2, r3 + 8000cf4: d907 bls.n 8000d06 <__udivmoddi4+0x11e> + 8000cf6: 18fb adds r3, r7, r3 + 8000cf8: f10c 38ff add.w r8, ip, #4294967295 + 8000cfc: d202 bcs.n 8000d04 <__udivmoddi4+0x11c> + 8000cfe: 429a cmp r2, r3 + 8000d00: f200 80e0 bhi.w 8000ec4 <__udivmoddi4+0x2dc> + 8000d04: 46c4 mov ip, r8 + 8000d06: 1a9b subs r3, r3, r2 + 8000d08: fbb3 f2fe udiv r2, r3, lr + 8000d0c: fb0e 3312 mls r3, lr, r2, r3 + 8000d10: ea40 4303 orr.w r3, r0, r3, lsl #16 + 8000d14: fb02 f404 mul.w r4, r2, r4 + 8000d18: 429c cmp r4, r3 + 8000d1a: d907 bls.n 8000d2c <__udivmoddi4+0x144> + 8000d1c: 18fb adds r3, r7, r3 + 8000d1e: f102 30ff add.w r0, r2, #4294967295 + 8000d22: d202 bcs.n 8000d2a <__udivmoddi4+0x142> + 8000d24: 429c cmp r4, r3 + 8000d26: f200 80ca bhi.w 8000ebe <__udivmoddi4+0x2d6> + 8000d2a: 4602 mov r2, r0 + 8000d2c: 1b1b subs r3, r3, r4 + 8000d2e: ea42 400c orr.w r0, r2, ip, lsl #16 + 8000d32: e7a5 b.n 8000c80 <__udivmoddi4+0x98> + 8000d34: f1c1 0620 rsb r6, r1, #32 + 8000d38: 408b lsls r3, r1 + 8000d3a: fa22 f706 lsr.w r7, r2, r6 + 8000d3e: 431f orrs r7, r3 + 8000d40: fa0e f401 lsl.w r4, lr, r1 + 8000d44: fa20 f306 lsr.w r3, r0, r6 + 8000d48: fa2e fe06 lsr.w lr, lr, r6 + 8000d4c: ea4f 4917 mov.w r9, r7, lsr #16 + 8000d50: 4323 orrs r3, r4 + 8000d52: fa00 f801 lsl.w r8, r0, r1 + 8000d56: fa1f fc87 uxth.w ip, r7 + 8000d5a: fbbe f0f9 udiv r0, lr, r9 + 8000d5e: 0c1c lsrs r4, r3, #16 + 8000d60: fb09 ee10 mls lr, r9, r0, lr + 8000d64: ea44 440e orr.w r4, r4, lr, lsl #16 + 8000d68: fb00 fe0c mul.w lr, r0, ip + 8000d6c: 45a6 cmp lr, r4 + 8000d6e: fa02 f201 lsl.w r2, r2, r1 + 8000d72: d909 bls.n 8000d88 <__udivmoddi4+0x1a0> + 8000d74: 193c adds r4, r7, r4 + 8000d76: f100 3aff add.w sl, r0, #4294967295 + 8000d7a: f080 809c bcs.w 8000eb6 <__udivmoddi4+0x2ce> + 8000d7e: 45a6 cmp lr, r4 + 8000d80: f240 8099 bls.w 8000eb6 <__udivmoddi4+0x2ce> + 8000d84: 3802 subs r0, #2 + 8000d86: 443c add r4, r7 + 8000d88: eba4 040e sub.w r4, r4, lr + 8000d8c: fa1f fe83 uxth.w lr, r3 + 8000d90: fbb4 f3f9 udiv r3, r4, r9 + 8000d94: fb09 4413 mls r4, r9, r3, r4 + 8000d98: ea4e 4404 orr.w r4, lr, r4, lsl #16 + 8000d9c: fb03 fc0c mul.w ip, r3, ip + 8000da0: 45a4 cmp ip, r4 + 8000da2: d908 bls.n 8000db6 <__udivmoddi4+0x1ce> + 8000da4: 193c adds r4, r7, r4 + 8000da6: f103 3eff add.w lr, r3, #4294967295 + 8000daa: f080 8082 bcs.w 8000eb2 <__udivmoddi4+0x2ca> + 8000dae: 45a4 cmp ip, r4 + 8000db0: d97f bls.n 8000eb2 <__udivmoddi4+0x2ca> + 8000db2: 3b02 subs r3, #2 + 8000db4: 443c add r4, r7 + 8000db6: ea43 4000 orr.w r0, r3, r0, lsl #16 + 8000dba: eba4 040c sub.w r4, r4, ip + 8000dbe: fba0 ec02 umull lr, ip, r0, r2 + 8000dc2: 4564 cmp r4, ip + 8000dc4: 4673 mov r3, lr + 8000dc6: 46e1 mov r9, ip + 8000dc8: d362 bcc.n 8000e90 <__udivmoddi4+0x2a8> + 8000dca: d05f beq.n 8000e8c <__udivmoddi4+0x2a4> + 8000dcc: b15d cbz r5, 8000de6 <__udivmoddi4+0x1fe> + 8000dce: ebb8 0203 subs.w r2, r8, r3 + 8000dd2: eb64 0409 sbc.w r4, r4, r9 + 8000dd6: fa04 f606 lsl.w r6, r4, r6 + 8000dda: fa22 f301 lsr.w r3, r2, r1 + 8000dde: 431e orrs r6, r3 + 8000de0: 40cc lsrs r4, r1 + 8000de2: e9c5 6400 strd r6, r4, [r5] + 8000de6: 2100 movs r1, #0 + 8000de8: e74f b.n 8000c8a <__udivmoddi4+0xa2> + 8000dea: fbb1 fcf2 udiv ip, r1, r2 + 8000dee: 0c01 lsrs r1, r0, #16 + 8000df0: ea41 410e orr.w r1, r1, lr, lsl #16 + 8000df4: b280 uxth r0, r0 + 8000df6: ea40 4201 orr.w r2, r0, r1, lsl #16 + 8000dfa: 463b mov r3, r7 + 8000dfc: 4638 mov r0, r7 + 8000dfe: 463c mov r4, r7 + 8000e00: 46b8 mov r8, r7 + 8000e02: 46be mov lr, r7 + 8000e04: 2620 movs r6, #32 + 8000e06: fbb1 f1f7 udiv r1, r1, r7 + 8000e0a: eba2 0208 sub.w r2, r2, r8 + 8000e0e: ea41 410c orr.w r1, r1, ip, lsl #16 + 8000e12: e766 b.n 8000ce2 <__udivmoddi4+0xfa> + 8000e14: 4601 mov r1, r0 + 8000e16: e718 b.n 8000c4a <__udivmoddi4+0x62> + 8000e18: 4610 mov r0, r2 + 8000e1a: e72c b.n 8000c76 <__udivmoddi4+0x8e> + 8000e1c: f1c6 0220 rsb r2, r6, #32 + 8000e20: fa2e f302 lsr.w r3, lr, r2 + 8000e24: 40b7 lsls r7, r6 + 8000e26: 40b1 lsls r1, r6 + 8000e28: fa20 f202 lsr.w r2, r0, r2 + 8000e2c: ea4f 4e17 mov.w lr, r7, lsr #16 + 8000e30: 430a orrs r2, r1 + 8000e32: fbb3 f8fe udiv r8, r3, lr + 8000e36: b2bc uxth r4, r7 + 8000e38: fb0e 3318 mls r3, lr, r8, r3 + 8000e3c: 0c11 lsrs r1, r2, #16 + 8000e3e: ea41 4103 orr.w r1, r1, r3, lsl #16 + 8000e42: fb08 f904 mul.w r9, r8, r4 + 8000e46: 40b0 lsls r0, r6 + 8000e48: 4589 cmp r9, r1 + 8000e4a: ea4f 4310 mov.w r3, r0, lsr #16 + 8000e4e: b280 uxth r0, r0 + 8000e50: d93e bls.n 8000ed0 <__udivmoddi4+0x2e8> + 8000e52: 1879 adds r1, r7, r1 + 8000e54: f108 3cff add.w ip, r8, #4294967295 + 8000e58: d201 bcs.n 8000e5e <__udivmoddi4+0x276> + 8000e5a: 4589 cmp r9, r1 + 8000e5c: d81f bhi.n 8000e9e <__udivmoddi4+0x2b6> + 8000e5e: eba1 0109 sub.w r1, r1, r9 + 8000e62: fbb1 f9fe udiv r9, r1, lr + 8000e66: fb09 f804 mul.w r8, r9, r4 + 8000e6a: fb0e 1119 mls r1, lr, r9, r1 + 8000e6e: b292 uxth r2, r2 + 8000e70: ea42 4201 orr.w r2, r2, r1, lsl #16 + 8000e74: 4542 cmp r2, r8 + 8000e76: d229 bcs.n 8000ecc <__udivmoddi4+0x2e4> + 8000e78: 18ba adds r2, r7, r2 + 8000e7a: f109 31ff add.w r1, r9, #4294967295 + 8000e7e: d2c4 bcs.n 8000e0a <__udivmoddi4+0x222> + 8000e80: 4542 cmp r2, r8 + 8000e82: d2c2 bcs.n 8000e0a <__udivmoddi4+0x222> + 8000e84: f1a9 0102 sub.w r1, r9, #2 + 8000e88: 443a add r2, r7 + 8000e8a: e7be b.n 8000e0a <__udivmoddi4+0x222> + 8000e8c: 45f0 cmp r8, lr + 8000e8e: d29d bcs.n 8000dcc <__udivmoddi4+0x1e4> + 8000e90: ebbe 0302 subs.w r3, lr, r2 + 8000e94: eb6c 0c07 sbc.w ip, ip, r7 + 8000e98: 3801 subs r0, #1 + 8000e9a: 46e1 mov r9, ip + 8000e9c: e796 b.n 8000dcc <__udivmoddi4+0x1e4> + 8000e9e: eba7 0909 sub.w r9, r7, r9 + 8000ea2: 4449 add r1, r9 + 8000ea4: f1a8 0c02 sub.w ip, r8, #2 + 8000ea8: fbb1 f9fe udiv r9, r1, lr + 8000eac: fb09 f804 mul.w r8, r9, r4 + 8000eb0: e7db b.n 8000e6a <__udivmoddi4+0x282> + 8000eb2: 4673 mov r3, lr + 8000eb4: e77f b.n 8000db6 <__udivmoddi4+0x1ce> + 8000eb6: 4650 mov r0, sl + 8000eb8: e766 b.n 8000d88 <__udivmoddi4+0x1a0> + 8000eba: 4608 mov r0, r1 + 8000ebc: e6fd b.n 8000cba <__udivmoddi4+0xd2> + 8000ebe: 443b add r3, r7 + 8000ec0: 3a02 subs r2, #2 + 8000ec2: e733 b.n 8000d2c <__udivmoddi4+0x144> + 8000ec4: f1ac 0c02 sub.w ip, ip, #2 + 8000ec8: 443b add r3, r7 + 8000eca: e71c b.n 8000d06 <__udivmoddi4+0x11e> + 8000ecc: 4649 mov r1, r9 + 8000ece: e79c b.n 8000e0a <__udivmoddi4+0x222> + 8000ed0: eba1 0109 sub.w r1, r1, r9 + 8000ed4: 46c4 mov ip, r8 + 8000ed6: fbb1 f9fe udiv r9, r1, lr + 8000eda: fb09 f804 mul.w r8, r9, r4 + 8000ede: e7c4 b.n 8000e6a <__udivmoddi4+0x282> + +08000ee0 <__aeabi_idiv0>: + 8000ee0: 4770 bx lr + 8000ee2: bf00 nop + +08000ee4 : +/** + * @brief Converts degrees to radians. + * @param degrees Degrees. + * @return Radians. + */ +static inline float FusionDegreesToRadians(const float degrees) { + 8000ee4: b480 push {r7} + 8000ee6: b083 sub sp, #12 + 8000ee8: af00 add r7, sp, #0 + 8000eea: ed87 0a01 vstr s0, [r7, #4] + return degrees * ((float) M_PI / 180.0f); + 8000eee: edd7 7a01 vldr s15, [r7, #4] + 8000ef2: ed9f 7a05 vldr s14, [pc, #20] @ 8000f08 + 8000ef6: ee67 7a87 vmul.f32 s15, s15, s14 +} + 8000efa: eeb0 0a67 vmov.f32 s0, s15 + 8000efe: 370c adds r7, #12 + 8000f00: 46bd mov sp, r7 + 8000f02: f85d 7b04 ldr.w r7, [sp], #4 + 8000f06: 4770 bx lr + 8000f08: 3c8efa35 .word 0x3c8efa35 + +08000f0c : +/** + * @brief Converts radians to degrees. + * @param radians Radians. + * @return Degrees. + */ +static inline float FusionRadiansToDegrees(const float radians) { + 8000f0c: b480 push {r7} + 8000f0e: b083 sub sp, #12 + 8000f10: af00 add r7, sp, #0 + 8000f12: ed87 0a01 vstr s0, [r7, #4] + return radians * (180.0f / (float) M_PI); + 8000f16: edd7 7a01 vldr s15, [r7, #4] + 8000f1a: ed9f 7a05 vldr s14, [pc, #20] @ 8000f30 + 8000f1e: ee67 7a87 vmul.f32 s15, s15, s14 +} + 8000f22: eeb0 0a67 vmov.f32 s0, s15 + 8000f26: 370c adds r7, #12 + 8000f28: 46bd mov sp, r7 + 8000f2a: f85d 7b04 ldr.w r7, [sp], #4 + 8000f2e: 4770 bx lr + 8000f30: 42652ee0 .word 0x42652ee0 + +08000f34 : +/** + * @brief Returns the arc sine of the value. + * @param value Value. + * @return Arc sine of the value. + */ +static inline float FusionAsin(const float value) { + 8000f34: b580 push {r7, lr} + 8000f36: b082 sub sp, #8 + 8000f38: af00 add r7, sp, #0 + 8000f3a: ed87 0a01 vstr s0, [r7, #4] + if (value <= -1.0f) { + 8000f3e: edd7 7a01 vldr s15, [r7, #4] + 8000f42: eebf 7a00 vmov.f32 s14, #240 @ 0xbf800000 -1.0 + 8000f46: eef4 7ac7 vcmpe.f32 s15, s14 + 8000f4a: eef1 fa10 vmrs APSR_nzcv, fpscr + 8000f4e: d802 bhi.n 8000f56 + return (float) M_PI / -2.0f; + 8000f50: eddf 7a0c vldr s15, [pc, #48] @ 8000f84 + 8000f54: e011 b.n 8000f7a + } + if (value >= 1.0f) { + 8000f56: edd7 7a01 vldr s15, [r7, #4] + 8000f5a: eeb7 7a00 vmov.f32 s14, #112 @ 0x3f800000 1.0 + 8000f5e: eef4 7ac7 vcmpe.f32 s15, s14 + 8000f62: eef1 fa10 vmrs APSR_nzcv, fpscr + 8000f66: db02 blt.n 8000f6e + return (float) M_PI / 2.0f; + 8000f68: eddf 7a07 vldr s15, [pc, #28] @ 8000f88 + 8000f6c: e005 b.n 8000f7a + } + return asinf(value); + 8000f6e: ed97 0a01 vldr s0, [r7, #4] + 8000f72: f009 f89b bl 800a0ac + 8000f76: eef0 7a40 vmov.f32 s15, s0 +} + 8000f7a: eeb0 0a67 vmov.f32 s0, s15 + 8000f7e: 3708 adds r7, #8 + 8000f80: 46bd mov sp, r7 + 8000f82: bd80 pop {r7, pc} + 8000f84: bfc90fdb .word 0xbfc90fdb + 8000f88: 3fc90fdb .word 0x3fc90fdb + +08000f8c : + * @brief Calculates the reciprocal of the square root. + * See https://pizer.wordpress.com/2008/10/12/fast-inverse-square-root/ + * @param x Operand. + * @return Reciprocal of the square root of x. + */ +static inline float FusionFastInverseSqrt(const float x) { + 8000f8c: b480 push {r7} + 8000f8e: b085 sub sp, #20 + 8000f90: af00 add r7, sp, #0 + 8000f92: ed87 0a01 vstr s0, [r7, #4] + typedef union { + float f; + int32_t i; + } Union32; + + Union32 union32 = {.f = x}; + 8000f96: 687b ldr r3, [r7, #4] + 8000f98: 60fb str r3, [r7, #12] + union32.i = 0x5F1F1412 - (union32.i >> 1); + 8000f9a: 68fb ldr r3, [r7, #12] + 8000f9c: 105a asrs r2, r3, #1 + 8000f9e: 4b10 ldr r3, [pc, #64] @ (8000fe0 ) + 8000fa0: 1a9b subs r3, r3, r2 + 8000fa2: 60fb str r3, [r7, #12] + return union32.f * (1.69000231f - 0.714158168f * x * union32.f * union32.f); + 8000fa4: ed97 7a03 vldr s14, [r7, #12] + 8000fa8: edd7 7a01 vldr s15, [r7, #4] + 8000fac: eddf 6a0d vldr s13, [pc, #52] @ 8000fe4 + 8000fb0: ee67 6aa6 vmul.f32 s13, s15, s13 + 8000fb4: edd7 7a03 vldr s15, [r7, #12] + 8000fb8: ee66 6aa7 vmul.f32 s13, s13, s15 + 8000fbc: edd7 7a03 vldr s15, [r7, #12] + 8000fc0: ee66 7aa7 vmul.f32 s15, s13, s15 + 8000fc4: eddf 6a08 vldr s13, [pc, #32] @ 8000fe8 + 8000fc8: ee76 7ae7 vsub.f32 s15, s13, s15 + 8000fcc: ee67 7a27 vmul.f32 s15, s14, s15 +} + 8000fd0: eeb0 0a67 vmov.f32 s0, s15 + 8000fd4: 3714 adds r7, #20 + 8000fd6: 46bd mov sp, r7 + 8000fd8: f85d 7b04 ldr.w r7, [sp], #4 + 8000fdc: 4770 bx lr + 8000fde: bf00 nop + 8000fe0: 5f1f1412 .word 0x5f1f1412 + 8000fe4: 3f36d312 .word 0x3f36d312 + 8000fe8: 3fd851ff .word 0x3fd851ff + +08000fec : +/** + * @brief Returns true if the vector is zero. + * @param vector Vector. + * @return True if the vector is zero. + */ +static inline bool FusionVectorIsZero(const FusionVector vector) { + 8000fec: b480 push {r7} + 8000fee: b085 sub sp, #20 + 8000ff0: af00 add r7, sp, #0 + 8000ff2: eef0 6a40 vmov.f32 s13, s0 + 8000ff6: eeb0 7a60 vmov.f32 s14, s1 + 8000ffa: eef0 7a41 vmov.f32 s15, s2 + 8000ffe: edc7 6a01 vstr s13, [r7, #4] + 8001002: ed87 7a02 vstr s14, [r7, #8] + 8001006: edc7 7a03 vstr s15, [r7, #12] + return (vector.axis.x == 0.0f) && (vector.axis.y == 0.0f) && (vector.axis.z == 0.0f); + 800100a: edd7 7a01 vldr s15, [r7, #4] + 800100e: eef5 7a40 vcmp.f32 s15, #0.0 + 8001012: eef1 fa10 vmrs APSR_nzcv, fpscr + 8001016: d10f bne.n 8001038 + 8001018: edd7 7a02 vldr s15, [r7, #8] + 800101c: eef5 7a40 vcmp.f32 s15, #0.0 + 8001020: eef1 fa10 vmrs APSR_nzcv, fpscr + 8001024: d108 bne.n 8001038 + 8001026: edd7 7a03 vldr s15, [r7, #12] + 800102a: eef5 7a40 vcmp.f32 s15, #0.0 + 800102e: eef1 fa10 vmrs APSR_nzcv, fpscr + 8001032: d101 bne.n 8001038 + 8001034: 2301 movs r3, #1 + 8001036: e000 b.n 800103a + 8001038: 2300 movs r3, #0 + 800103a: f003 0301 and.w r3, r3, #1 + 800103e: b2db uxtb r3, r3 +} + 8001040: 4618 mov r0, r3 + 8001042: 3714 adds r7, #20 + 8001044: 46bd mov sp, r7 + 8001046: f85d 7b04 ldr.w r7, [sp], #4 + 800104a: 4770 bx lr + +0800104c : + * @brief Returns the sum of two vectors. + * @param vectorA Vector A. + * @param vectorB Vector B. + * @return Sum of two vectors. + */ +static inline FusionVector FusionVectorAdd(const FusionVector vectorA, const FusionVector vectorB) { + 800104c: b480 push {r7} + 800104e: b091 sub sp, #68 @ 0x44 + 8001050: af00 add r7, sp, #0 + 8001052: eeb0 5a40 vmov.f32 s10, s0 + 8001056: eef0 5a60 vmov.f32 s11, s1 + 800105a: eeb0 6a41 vmov.f32 s12, s2 + 800105e: eef0 6a61 vmov.f32 s13, s3 + 8001062: eeb0 7a42 vmov.f32 s14, s4 + 8001066: eef0 7a62 vmov.f32 s15, s5 + 800106a: ed87 5a07 vstr s10, [r7, #28] + 800106e: edc7 5a08 vstr s11, [r7, #32] + 8001072: ed87 6a09 vstr s12, [r7, #36] @ 0x24 + 8001076: edc7 6a04 vstr s13, [r7, #16] + 800107a: ed87 7a05 vstr s14, [r7, #20] + 800107e: edc7 7a06 vstr s15, [r7, #24] + const FusionVector result = {.axis = { + .x = vectorA.axis.x + vectorB.axis.x, + 8001082: ed97 7a07 vldr s14, [r7, #28] + 8001086: edd7 7a04 vldr s15, [r7, #16] + 800108a: ee77 7a27 vadd.f32 s15, s14, s15 + const FusionVector result = {.axis = { + 800108e: edc7 7a0a vstr s15, [r7, #40] @ 0x28 + .y = vectorA.axis.y + vectorB.axis.y, + 8001092: ed97 7a08 vldr s14, [r7, #32] + 8001096: edd7 7a05 vldr s15, [r7, #20] + 800109a: ee77 7a27 vadd.f32 s15, s14, s15 + const FusionVector result = {.axis = { + 800109e: edc7 7a0b vstr s15, [r7, #44] @ 0x2c + .z = vectorA.axis.z + vectorB.axis.z, + 80010a2: ed97 7a09 vldr s14, [r7, #36] @ 0x24 + 80010a6: edd7 7a06 vldr s15, [r7, #24] + 80010aa: ee77 7a27 vadd.f32 s15, s14, s15 + const FusionVector result = {.axis = { + 80010ae: edc7 7a0c vstr s15, [r7, #48] @ 0x30 + }}; + return result; + 80010b2: f107 0334 add.w r3, r7, #52 @ 0x34 + 80010b6: f107 0228 add.w r2, r7, #40 @ 0x28 + 80010ba: ca07 ldmia r2, {r0, r1, r2} + 80010bc: e883 0007 stmia.w r3, {r0, r1, r2} + 80010c0: 6b79 ldr r1, [r7, #52] @ 0x34 + 80010c2: 6bba ldr r2, [r7, #56] @ 0x38 + 80010c4: 6bfb ldr r3, [r7, #60] @ 0x3c + 80010c6: ee06 1a90 vmov s13, r1 + 80010ca: ee07 2a10 vmov s14, r2 + 80010ce: ee07 3a90 vmov s15, r3 +} + 80010d2: eeb0 0a66 vmov.f32 s0, s13 + 80010d6: eef0 0a47 vmov.f32 s1, s14 + 80010da: eeb0 1a67 vmov.f32 s2, s15 + 80010de: 3744 adds r7, #68 @ 0x44 + 80010e0: 46bd mov sp, r7 + 80010e2: f85d 7b04 ldr.w r7, [sp], #4 + 80010e6: 4770 bx lr + +080010e8 : +/** + * @brief Returns the sum of the elements. + * @param vector Vector. + * @return Sum of the elements. + */ +static inline float FusionVectorSum(const FusionVector vector) { + 80010e8: b480 push {r7} + 80010ea: b085 sub sp, #20 + 80010ec: af00 add r7, sp, #0 + 80010ee: eef0 6a40 vmov.f32 s13, s0 + 80010f2: eeb0 7a60 vmov.f32 s14, s1 + 80010f6: eef0 7a41 vmov.f32 s15, s2 + 80010fa: edc7 6a01 vstr s13, [r7, #4] + 80010fe: ed87 7a02 vstr s14, [r7, #8] + 8001102: edc7 7a03 vstr s15, [r7, #12] + return vector.axis.x + vector.axis.y + vector.axis.z; + 8001106: ed97 7a01 vldr s14, [r7, #4] + 800110a: edd7 7a02 vldr s15, [r7, #8] + 800110e: ee37 7a27 vadd.f32 s14, s14, s15 + 8001112: edd7 7a03 vldr s15, [r7, #12] + 8001116: ee77 7a27 vadd.f32 s15, s14, s15 +} + 800111a: eeb0 0a67 vmov.f32 s0, s15 + 800111e: 3714 adds r7, #20 + 8001120: 46bd mov sp, r7 + 8001122: f85d 7b04 ldr.w r7, [sp], #4 + 8001126: 4770 bx lr + +08001128 : + * @brief Returns the multiplication of a vector by a scalar. + * @param vector Vector. + * @param scalar Scalar. + * @return Multiplication of a vector by a scalar. + */ +static inline FusionVector FusionVectorMultiplyScalar(const FusionVector vector, const float scalar) { + 8001128: b480 push {r7} + 800112a: b08f sub sp, #60 @ 0x3c + 800112c: af00 add r7, sp, #0 + 800112e: eef0 6a40 vmov.f32 s13, s0 + 8001132: eeb0 7a60 vmov.f32 s14, s1 + 8001136: eef0 7a41 vmov.f32 s15, s2 + 800113a: edc7 1a04 vstr s3, [r7, #16] + 800113e: edc7 6a05 vstr s13, [r7, #20] + 8001142: ed87 7a06 vstr s14, [r7, #24] + 8001146: edc7 7a07 vstr s15, [r7, #28] + const FusionVector result = {.axis = { + .x = vector.axis.x * scalar, + 800114a: ed97 7a05 vldr s14, [r7, #20] + 800114e: edd7 7a04 vldr s15, [r7, #16] + 8001152: ee67 7a27 vmul.f32 s15, s14, s15 + const FusionVector result = {.axis = { + 8001156: edc7 7a08 vstr s15, [r7, #32] + .y = vector.axis.y * scalar, + 800115a: ed97 7a06 vldr s14, [r7, #24] + 800115e: edd7 7a04 vldr s15, [r7, #16] + 8001162: ee67 7a27 vmul.f32 s15, s14, s15 + const FusionVector result = {.axis = { + 8001166: edc7 7a09 vstr s15, [r7, #36] @ 0x24 + .z = vector.axis.z * scalar, + 800116a: ed97 7a07 vldr s14, [r7, #28] + 800116e: edd7 7a04 vldr s15, [r7, #16] + 8001172: ee67 7a27 vmul.f32 s15, s14, s15 + const FusionVector result = {.axis = { + 8001176: edc7 7a0a vstr s15, [r7, #40] @ 0x28 + }}; + return result; + 800117a: f107 032c add.w r3, r7, #44 @ 0x2c + 800117e: f107 0220 add.w r2, r7, #32 + 8001182: ca07 ldmia r2, {r0, r1, r2} + 8001184: e883 0007 stmia.w r3, {r0, r1, r2} + 8001188: 6af9 ldr r1, [r7, #44] @ 0x2c + 800118a: 6b3a ldr r2, [r7, #48] @ 0x30 + 800118c: 6b7b ldr r3, [r7, #52] @ 0x34 + 800118e: ee06 1a90 vmov s13, r1 + 8001192: ee07 2a10 vmov s14, r2 + 8001196: ee07 3a90 vmov s15, r3 +} + 800119a: eeb0 0a66 vmov.f32 s0, s13 + 800119e: eef0 0a47 vmov.f32 s1, s14 + 80011a2: eeb0 1a67 vmov.f32 s2, s15 + 80011a6: 373c adds r7, #60 @ 0x3c + 80011a8: 46bd mov sp, r7 + 80011aa: f85d 7b04 ldr.w r7, [sp], #4 + 80011ae: 4770 bx lr + +080011b0 : + * @brief Calculates the Hadamard product (element-wise multiplication). + * @param vectorA Vector A. + * @param vectorB Vector B. + * @return Hadamard product. + */ +static inline FusionVector FusionVectorHadamardProduct(const FusionVector vectorA, const FusionVector vectorB) { + 80011b0: b480 push {r7} + 80011b2: b091 sub sp, #68 @ 0x44 + 80011b4: af00 add r7, sp, #0 + 80011b6: eeb0 5a40 vmov.f32 s10, s0 + 80011ba: eef0 5a60 vmov.f32 s11, s1 + 80011be: eeb0 6a41 vmov.f32 s12, s2 + 80011c2: eef0 6a61 vmov.f32 s13, s3 + 80011c6: eeb0 7a42 vmov.f32 s14, s4 + 80011ca: eef0 7a62 vmov.f32 s15, s5 + 80011ce: ed87 5a07 vstr s10, [r7, #28] + 80011d2: edc7 5a08 vstr s11, [r7, #32] + 80011d6: ed87 6a09 vstr s12, [r7, #36] @ 0x24 + 80011da: edc7 6a04 vstr s13, [r7, #16] + 80011de: ed87 7a05 vstr s14, [r7, #20] + 80011e2: edc7 7a06 vstr s15, [r7, #24] + const FusionVector result = {.axis = { + .x = vectorA.axis.x * vectorB.axis.x, + 80011e6: ed97 7a07 vldr s14, [r7, #28] + 80011ea: edd7 7a04 vldr s15, [r7, #16] + 80011ee: ee67 7a27 vmul.f32 s15, s14, s15 + const FusionVector result = {.axis = { + 80011f2: edc7 7a0a vstr s15, [r7, #40] @ 0x28 + .y = vectorA.axis.y * vectorB.axis.y, + 80011f6: ed97 7a08 vldr s14, [r7, #32] + 80011fa: edd7 7a05 vldr s15, [r7, #20] + 80011fe: ee67 7a27 vmul.f32 s15, s14, s15 + const FusionVector result = {.axis = { + 8001202: edc7 7a0b vstr s15, [r7, #44] @ 0x2c + .z = vectorA.axis.z * vectorB.axis.z, + 8001206: ed97 7a09 vldr s14, [r7, #36] @ 0x24 + 800120a: edd7 7a06 vldr s15, [r7, #24] + 800120e: ee67 7a27 vmul.f32 s15, s14, s15 + const FusionVector result = {.axis = { + 8001212: edc7 7a0c vstr s15, [r7, #48] @ 0x30 + }}; + return result; + 8001216: f107 0334 add.w r3, r7, #52 @ 0x34 + 800121a: f107 0228 add.w r2, r7, #40 @ 0x28 + 800121e: ca07 ldmia r2, {r0, r1, r2} + 8001220: e883 0007 stmia.w r3, {r0, r1, r2} + 8001224: 6b79 ldr r1, [r7, #52] @ 0x34 + 8001226: 6bba ldr r2, [r7, #56] @ 0x38 + 8001228: 6bfb ldr r3, [r7, #60] @ 0x3c + 800122a: ee06 1a90 vmov s13, r1 + 800122e: ee07 2a10 vmov s14, r2 + 8001232: ee07 3a90 vmov s15, r3 +} + 8001236: eeb0 0a66 vmov.f32 s0, s13 + 800123a: eef0 0a47 vmov.f32 s1, s14 + 800123e: eeb0 1a67 vmov.f32 s2, s15 + 8001242: 3744 adds r7, #68 @ 0x44 + 8001244: 46bd mov sp, r7 + 8001246: f85d 7b04 ldr.w r7, [sp], #4 + 800124a: 4770 bx lr + +0800124c : + * @brief Returns the cross product. + * @param vectorA Vector A. + * @param vectorB Vector B. + * @return Cross product. + */ +static inline FusionVector FusionVectorCrossProduct(const FusionVector vectorA, const FusionVector vectorB) { + 800124c: b480 push {r7} + 800124e: b091 sub sp, #68 @ 0x44 + 8001250: af00 add r7, sp, #0 + 8001252: eeb0 5a40 vmov.f32 s10, s0 + 8001256: eef0 5a60 vmov.f32 s11, s1 + 800125a: eeb0 6a41 vmov.f32 s12, s2 + 800125e: eef0 6a61 vmov.f32 s13, s3 + 8001262: eeb0 7a42 vmov.f32 s14, s4 + 8001266: eef0 7a62 vmov.f32 s15, s5 + 800126a: ed87 5a07 vstr s10, [r7, #28] + 800126e: edc7 5a08 vstr s11, [r7, #32] + 8001272: ed87 6a09 vstr s12, [r7, #36] @ 0x24 + 8001276: edc7 6a04 vstr s13, [r7, #16] + 800127a: ed87 7a05 vstr s14, [r7, #20] + 800127e: edc7 7a06 vstr s15, [r7, #24] +#define A vectorA.axis +#define B vectorB.axis + const FusionVector result = {.axis = { + .x = A.y * B.z - A.z * B.y, + 8001282: ed97 7a08 vldr s14, [r7, #32] + 8001286: edd7 7a06 vldr s15, [r7, #24] + 800128a: ee27 7a27 vmul.f32 s14, s14, s15 + 800128e: edd7 6a09 vldr s13, [r7, #36] @ 0x24 + 8001292: edd7 7a05 vldr s15, [r7, #20] + 8001296: ee66 7aa7 vmul.f32 s15, s13, s15 + 800129a: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionVector result = {.axis = { + 800129e: edc7 7a0a vstr s15, [r7, #40] @ 0x28 + .y = A.z * B.x - A.x * B.z, + 80012a2: ed97 7a09 vldr s14, [r7, #36] @ 0x24 + 80012a6: edd7 7a04 vldr s15, [r7, #16] + 80012aa: ee27 7a27 vmul.f32 s14, s14, s15 + 80012ae: edd7 6a07 vldr s13, [r7, #28] + 80012b2: edd7 7a06 vldr s15, [r7, #24] + 80012b6: ee66 7aa7 vmul.f32 s15, s13, s15 + 80012ba: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionVector result = {.axis = { + 80012be: edc7 7a0b vstr s15, [r7, #44] @ 0x2c + .z = A.x * B.y - A.y * B.x, + 80012c2: ed97 7a07 vldr s14, [r7, #28] + 80012c6: edd7 7a05 vldr s15, [r7, #20] + 80012ca: ee27 7a27 vmul.f32 s14, s14, s15 + 80012ce: edd7 6a08 vldr s13, [r7, #32] + 80012d2: edd7 7a04 vldr s15, [r7, #16] + 80012d6: ee66 7aa7 vmul.f32 s15, s13, s15 + 80012da: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionVector result = {.axis = { + 80012de: edc7 7a0c vstr s15, [r7, #48] @ 0x30 + }}; + return result; + 80012e2: f107 0334 add.w r3, r7, #52 @ 0x34 + 80012e6: f107 0228 add.w r2, r7, #40 @ 0x28 + 80012ea: ca07 ldmia r2, {r0, r1, r2} + 80012ec: e883 0007 stmia.w r3, {r0, r1, r2} + 80012f0: 6b79 ldr r1, [r7, #52] @ 0x34 + 80012f2: 6bba ldr r2, [r7, #56] @ 0x38 + 80012f4: 6bfb ldr r3, [r7, #60] @ 0x3c + 80012f6: ee06 1a90 vmov s13, r1 + 80012fa: ee07 2a10 vmov s14, r2 + 80012fe: ee07 3a90 vmov s15, r3 +#undef A +#undef B +} + 8001302: eeb0 0a66 vmov.f32 s0, s13 + 8001306: eef0 0a47 vmov.f32 s1, s14 + 800130a: eeb0 1a67 vmov.f32 s2, s15 + 800130e: 3744 adds r7, #68 @ 0x44 + 8001310: 46bd mov sp, r7 + 8001312: f85d 7b04 ldr.w r7, [sp], #4 + 8001316: 4770 bx lr + +08001318 : + * @brief Returns the dot product. + * @param vectorA Vector A. + * @param vectorB Vector B. + * @return Dot product. + */ +static inline float FusionVectorDotProduct(const FusionVector vectorA, const FusionVector vectorB) { + 8001318: b580 push {r7, lr} + 800131a: b08a sub sp, #40 @ 0x28 + 800131c: af00 add r7, sp, #0 + 800131e: eeb0 5a40 vmov.f32 s10, s0 + 8001322: eef0 5a60 vmov.f32 s11, s1 + 8001326: eeb0 6a41 vmov.f32 s12, s2 + 800132a: eef0 6a61 vmov.f32 s13, s3 + 800132e: eeb0 7a42 vmov.f32 s14, s4 + 8001332: eef0 7a62 vmov.f32 s15, s5 + 8001336: ed87 5a03 vstr s10, [r7, #12] + 800133a: edc7 5a04 vstr s11, [r7, #16] + 800133e: ed87 6a05 vstr s12, [r7, #20] + 8001342: edc7 6a00 vstr s13, [r7] + 8001346: ed87 7a01 vstr s14, [r7, #4] + 800134a: edc7 7a02 vstr s15, [r7, #8] + return FusionVectorSum(FusionVectorHadamardProduct(vectorA, vectorB)); + 800134e: ed97 5a00 vldr s10, [r7] + 8001352: edd7 5a01 vldr s11, [r7, #4] + 8001356: ed97 6a02 vldr s12, [r7, #8] + 800135a: edd7 6a03 vldr s13, [r7, #12] + 800135e: ed97 7a04 vldr s14, [r7, #16] + 8001362: edd7 7a05 vldr s15, [r7, #20] + 8001366: eef0 1a45 vmov.f32 s3, s10 + 800136a: eeb0 2a65 vmov.f32 s4, s11 + 800136e: eef0 2a46 vmov.f32 s5, s12 + 8001372: eeb0 0a66 vmov.f32 s0, s13 + 8001376: eef0 0a47 vmov.f32 s1, s14 + 800137a: eeb0 1a67 vmov.f32 s2, s15 + 800137e: f7ff ff17 bl 80011b0 + 8001382: eef0 6a40 vmov.f32 s13, s0 + 8001386: eeb0 7a60 vmov.f32 s14, s1 + 800138a: eef0 7a41 vmov.f32 s15, s2 + 800138e: edc7 6a07 vstr s13, [r7, #28] + 8001392: ed87 7a08 vstr s14, [r7, #32] + 8001396: edc7 7a09 vstr s15, [r7, #36] @ 0x24 + 800139a: edd7 6a07 vldr s13, [r7, #28] + 800139e: ed97 7a08 vldr s14, [r7, #32] + 80013a2: edd7 7a09 vldr s15, [r7, #36] @ 0x24 + 80013a6: eeb0 0a66 vmov.f32 s0, s13 + 80013aa: eef0 0a47 vmov.f32 s1, s14 + 80013ae: eeb0 1a67 vmov.f32 s2, s15 + 80013b2: f7ff fe99 bl 80010e8 + 80013b6: eef0 7a40 vmov.f32 s15, s0 +} + 80013ba: eeb0 0a67 vmov.f32 s0, s15 + 80013be: 3728 adds r7, #40 @ 0x28 + 80013c0: 46bd mov sp, r7 + 80013c2: bd80 pop {r7, pc} + +080013c4 : +/** + * @brief Returns the vector magnitude squared. + * @param vector Vector. + * @return Vector magnitude squared. + */ +static inline float FusionVectorMagnitudeSquared(const FusionVector vector) { + 80013c4: b580 push {r7, lr} + 80013c6: b088 sub sp, #32 + 80013c8: af00 add r7, sp, #0 + 80013ca: eef0 6a40 vmov.f32 s13, s0 + 80013ce: eeb0 7a60 vmov.f32 s14, s1 + 80013d2: eef0 7a41 vmov.f32 s15, s2 + 80013d6: edc7 6a01 vstr s13, [r7, #4] + 80013da: ed87 7a02 vstr s14, [r7, #8] + 80013de: edc7 7a03 vstr s15, [r7, #12] + return FusionVectorSum(FusionVectorHadamardProduct(vector, vector)); + 80013e2: ed97 5a01 vldr s10, [r7, #4] + 80013e6: edd7 5a02 vldr s11, [r7, #8] + 80013ea: ed97 6a03 vldr s12, [r7, #12] + 80013ee: edd7 6a01 vldr s13, [r7, #4] + 80013f2: ed97 7a02 vldr s14, [r7, #8] + 80013f6: edd7 7a03 vldr s15, [r7, #12] + 80013fa: eef0 1a45 vmov.f32 s3, s10 + 80013fe: eeb0 2a65 vmov.f32 s4, s11 + 8001402: eef0 2a46 vmov.f32 s5, s12 + 8001406: eeb0 0a66 vmov.f32 s0, s13 + 800140a: eef0 0a47 vmov.f32 s1, s14 + 800140e: eeb0 1a67 vmov.f32 s2, s15 + 8001412: f7ff fecd bl 80011b0 + 8001416: eef0 6a40 vmov.f32 s13, s0 + 800141a: eeb0 7a60 vmov.f32 s14, s1 + 800141e: eef0 7a41 vmov.f32 s15, s2 + 8001422: edc7 6a05 vstr s13, [r7, #20] + 8001426: ed87 7a06 vstr s14, [r7, #24] + 800142a: edc7 7a07 vstr s15, [r7, #28] + 800142e: edd7 6a05 vldr s13, [r7, #20] + 8001432: ed97 7a06 vldr s14, [r7, #24] + 8001436: edd7 7a07 vldr s15, [r7, #28] + 800143a: eeb0 0a66 vmov.f32 s0, s13 + 800143e: eef0 0a47 vmov.f32 s1, s14 + 8001442: eeb0 1a67 vmov.f32 s2, s15 + 8001446: f7ff fe4f bl 80010e8 + 800144a: eef0 7a40 vmov.f32 s15, s0 +} + 800144e: eeb0 0a67 vmov.f32 s0, s15 + 8001452: 3720 adds r7, #32 + 8001454: 46bd mov sp, r7 + 8001456: bd80 pop {r7, pc} + +08001458 : +/** + * @brief Returns the vector magnitude. + * @param vector Vector. + * @return Vector magnitude. + */ +static inline float FusionVectorMagnitude(const FusionVector vector) { + 8001458: b580 push {r7, lr} + 800145a: b084 sub sp, #16 + 800145c: af00 add r7, sp, #0 + 800145e: eef0 6a40 vmov.f32 s13, s0 + 8001462: eeb0 7a60 vmov.f32 s14, s1 + 8001466: eef0 7a41 vmov.f32 s15, s2 + 800146a: edc7 6a01 vstr s13, [r7, #4] + 800146e: ed87 7a02 vstr s14, [r7, #8] + 8001472: edc7 7a03 vstr s15, [r7, #12] + return sqrtf(FusionVectorMagnitudeSquared(vector)); + 8001476: edd7 6a01 vldr s13, [r7, #4] + 800147a: ed97 7a02 vldr s14, [r7, #8] + 800147e: edd7 7a03 vldr s15, [r7, #12] + 8001482: eeb0 0a66 vmov.f32 s0, s13 + 8001486: eef0 0a47 vmov.f32 s1, s14 + 800148a: eeb0 1a67 vmov.f32 s2, s15 + 800148e: f7ff ff99 bl 80013c4 + 8001492: eef0 7a40 vmov.f32 s15, s0 + 8001496: eeb0 0a67 vmov.f32 s0, s15 + 800149a: f008 fe8d bl 800a1b8 + 800149e: eef0 7a40 vmov.f32 s15, s0 +} + 80014a2: eeb0 0a67 vmov.f32 s0, s15 + 80014a6: 3710 adds r7, #16 + 80014a8: 46bd mov sp, r7 + 80014aa: bd80 pop {r7, pc} + +080014ac : +/** + * @brief Returns the normalised vector. + * @param vector Vector. + * @return Normalised vector. + */ +static inline FusionVector FusionVectorNormalise(const FusionVector vector) { + 80014ac: b580 push {r7, lr} + 80014ae: b08c sub sp, #48 @ 0x30 + 80014b0: af00 add r7, sp, #0 + 80014b2: eef0 6a40 vmov.f32 s13, s0 + 80014b6: eeb0 7a60 vmov.f32 s14, s1 + 80014ba: eef0 7a41 vmov.f32 s15, s2 + 80014be: edc7 6a05 vstr s13, [r7, #20] + 80014c2: ed87 7a06 vstr s14, [r7, #24] + 80014c6: edc7 7a07 vstr s15, [r7, #28] +#ifdef FUSION_USE_NORMAL_SQRT + const float magnitudeReciprocal = 1.0f / sqrtf(FusionVectorMagnitudeSquared(vector)); +#else + const float magnitudeReciprocal = FusionFastInverseSqrt(FusionVectorMagnitudeSquared(vector)); + 80014ca: edd7 6a05 vldr s13, [r7, #20] + 80014ce: ed97 7a06 vldr s14, [r7, #24] + 80014d2: edd7 7a07 vldr s15, [r7, #28] + 80014d6: eeb0 0a66 vmov.f32 s0, s13 + 80014da: eef0 0a47 vmov.f32 s1, s14 + 80014de: eeb0 1a67 vmov.f32 s2, s15 + 80014e2: f7ff ff6f bl 80013c4 + 80014e6: eef0 7a40 vmov.f32 s15, s0 + 80014ea: eeb0 0a67 vmov.f32 s0, s15 + 80014ee: f7ff fd4d bl 8000f8c + 80014f2: ed87 0a0b vstr s0, [r7, #44] @ 0x2c +#endif + return FusionVectorMultiplyScalar(vector, magnitudeReciprocal); + 80014f6: edd7 6a05 vldr s13, [r7, #20] + 80014fa: ed97 7a06 vldr s14, [r7, #24] + 80014fe: edd7 7a07 vldr s15, [r7, #28] + 8001502: edd7 1a0b vldr s3, [r7, #44] @ 0x2c + 8001506: eeb0 0a66 vmov.f32 s0, s13 + 800150a: eef0 0a47 vmov.f32 s1, s14 + 800150e: eeb0 1a67 vmov.f32 s2, s15 + 8001512: f7ff fe09 bl 8001128 + 8001516: eef0 6a40 vmov.f32 s13, s0 + 800151a: eeb0 7a60 vmov.f32 s14, s1 + 800151e: eef0 7a41 vmov.f32 s15, s2 + 8001522: edc7 6a08 vstr s13, [r7, #32] + 8001526: ed87 7a09 vstr s14, [r7, #36] @ 0x24 + 800152a: edc7 7a0a vstr s15, [r7, #40] @ 0x28 + 800152e: 6a39 ldr r1, [r7, #32] + 8001530: 6a7a ldr r2, [r7, #36] @ 0x24 + 8001532: 6abb ldr r3, [r7, #40] @ 0x28 + 8001534: ee06 1a90 vmov s13, r1 + 8001538: ee07 2a10 vmov s14, r2 + 800153c: ee07 3a90 vmov s15, r3 +} + 8001540: eeb0 0a66 vmov.f32 s0, s13 + 8001544: eef0 0a47 vmov.f32 s1, s14 + 8001548: eeb0 1a67 vmov.f32 s2, s15 + 800154c: 3730 adds r7, #48 @ 0x30 + 800154e: 46bd mov sp, r7 + 8001550: bd80 pop {r7, pc} + +08001552 : + * @brief Returns the sum of two quaternions. + * @param quaternionA Quaternion A. + * @param quaternionB Quaternion B. + * @return Sum of two quaternions. + */ +static inline FusionQuaternion FusionQuaternionAdd(const FusionQuaternion quaternionA, const FusionQuaternion quaternionB) { + 8001552: b490 push {r4, r7} + 8001554: b094 sub sp, #80 @ 0x50 + 8001556: af00 add r7, sp, #0 + 8001558: eeb0 4a40 vmov.f32 s8, s0 + 800155c: eef0 4a60 vmov.f32 s9, s1 + 8001560: eeb0 5a41 vmov.f32 s10, s2 + 8001564: eef0 5a61 vmov.f32 s11, s3 + 8001568: eeb0 6a42 vmov.f32 s12, s4 + 800156c: eef0 6a62 vmov.f32 s13, s5 + 8001570: eeb0 7a43 vmov.f32 s14, s6 + 8001574: eef0 7a63 vmov.f32 s15, s7 + 8001578: ed87 4a08 vstr s8, [r7, #32] + 800157c: edc7 4a09 vstr s9, [r7, #36] @ 0x24 + 8001580: ed87 5a0a vstr s10, [r7, #40] @ 0x28 + 8001584: edc7 5a0b vstr s11, [r7, #44] @ 0x2c + 8001588: ed87 6a04 vstr s12, [r7, #16] + 800158c: edc7 6a05 vstr s13, [r7, #20] + 8001590: ed87 7a06 vstr s14, [r7, #24] + 8001594: edc7 7a07 vstr s15, [r7, #28] + const FusionQuaternion result = {.element = { + .w = quaternionA.element.w + quaternionB.element.w, + 8001598: ed97 7a08 vldr s14, [r7, #32] + 800159c: edd7 7a04 vldr s15, [r7, #16] + 80015a0: ee77 7a27 vadd.f32 s15, s14, s15 + const FusionQuaternion result = {.element = { + 80015a4: edc7 7a0c vstr s15, [r7, #48] @ 0x30 + .x = quaternionA.element.x + quaternionB.element.x, + 80015a8: ed97 7a09 vldr s14, [r7, #36] @ 0x24 + 80015ac: edd7 7a05 vldr s15, [r7, #20] + 80015b0: ee77 7a27 vadd.f32 s15, s14, s15 + const FusionQuaternion result = {.element = { + 80015b4: edc7 7a0d vstr s15, [r7, #52] @ 0x34 + .y = quaternionA.element.y + quaternionB.element.y, + 80015b8: ed97 7a0a vldr s14, [r7, #40] @ 0x28 + 80015bc: edd7 7a06 vldr s15, [r7, #24] + 80015c0: ee77 7a27 vadd.f32 s15, s14, s15 + const FusionQuaternion result = {.element = { + 80015c4: edc7 7a0e vstr s15, [r7, #56] @ 0x38 + .z = quaternionA.element.z + quaternionB.element.z, + 80015c8: ed97 7a0b vldr s14, [r7, #44] @ 0x2c + 80015cc: edd7 7a07 vldr s15, [r7, #28] + 80015d0: ee77 7a27 vadd.f32 s15, s14, s15 + const FusionQuaternion result = {.element = { + 80015d4: edc7 7a0f vstr s15, [r7, #60] @ 0x3c + }}; + return result; + 80015d8: f107 0440 add.w r4, r7, #64 @ 0x40 + 80015dc: f107 0330 add.w r3, r7, #48 @ 0x30 + 80015e0: cb0f ldmia r3, {r0, r1, r2, r3} + 80015e2: e884 000f stmia.w r4, {r0, r1, r2, r3} + 80015e6: 6c38 ldr r0, [r7, #64] @ 0x40 + 80015e8: 6c79 ldr r1, [r7, #68] @ 0x44 + 80015ea: 6cba ldr r2, [r7, #72] @ 0x48 + 80015ec: 6cfb ldr r3, [r7, #76] @ 0x4c + 80015ee: ee06 0a10 vmov s12, r0 + 80015f2: ee06 1a90 vmov s13, r1 + 80015f6: ee07 2a10 vmov s14, r2 + 80015fa: ee07 3a90 vmov s15, r3 +} + 80015fe: eeb0 0a46 vmov.f32 s0, s12 + 8001602: eef0 0a66 vmov.f32 s1, s13 + 8001606: eeb0 1a47 vmov.f32 s2, s14 + 800160a: eef0 1a67 vmov.f32 s3, s15 + 800160e: 3750 adds r7, #80 @ 0x50 + 8001610: 46bd mov sp, r7 + 8001612: bc90 pop {r4, r7} + 8001614: 4770 bx lr + +08001616 : + * multiplied by the vector. + * @param quaternion Quaternion. + * @param vector Vector. + * @return Multiplication of a quaternion with a vector. + */ +static inline FusionQuaternion FusionQuaternionMultiplyVector(const FusionQuaternion quaternion, const FusionVector vector) { + 8001616: b490 push {r4, r7} + 8001618: b094 sub sp, #80 @ 0x50 + 800161a: af00 add r7, sp, #0 + 800161c: eef0 4a40 vmov.f32 s9, s0 + 8001620: eeb0 5a60 vmov.f32 s10, s1 + 8001624: eef0 5a41 vmov.f32 s11, s2 + 8001628: eeb0 6a61 vmov.f32 s12, s3 + 800162c: eef0 6a42 vmov.f32 s13, s4 + 8001630: eeb0 7a62 vmov.f32 s14, s5 + 8001634: eef0 7a43 vmov.f32 s15, s6 + 8001638: edc7 4a08 vstr s9, [r7, #32] + 800163c: ed87 5a09 vstr s10, [r7, #36] @ 0x24 + 8001640: edc7 5a0a vstr s11, [r7, #40] @ 0x28 + 8001644: ed87 6a0b vstr s12, [r7, #44] @ 0x2c + 8001648: edc7 6a05 vstr s13, [r7, #20] + 800164c: ed87 7a06 vstr s14, [r7, #24] + 8001650: edc7 7a07 vstr s15, [r7, #28] +#define Q quaternion.element +#define V vector.axis + const FusionQuaternion result = {.element = { + .w = -Q.x * V.x - Q.y * V.y - Q.z * V.z, + 8001654: edd7 7a09 vldr s15, [r7, #36] @ 0x24 + 8001658: eeb1 7a67 vneg.f32 s14, s15 + 800165c: edd7 7a05 vldr s15, [r7, #20] + 8001660: ee27 7a27 vmul.f32 s14, s14, s15 + 8001664: edd7 6a0a vldr s13, [r7, #40] @ 0x28 + 8001668: edd7 7a06 vldr s15, [r7, #24] + 800166c: ee66 7aa7 vmul.f32 s15, s13, s15 + 8001670: ee37 7a67 vsub.f32 s14, s14, s15 + 8001674: edd7 6a0b vldr s13, [r7, #44] @ 0x2c + 8001678: edd7 7a07 vldr s15, [r7, #28] + 800167c: ee66 7aa7 vmul.f32 s15, s13, s15 + 8001680: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionQuaternion result = {.element = { + 8001684: edc7 7a0c vstr s15, [r7, #48] @ 0x30 + .x = Q.w * V.x + Q.y * V.z - Q.z * V.y, + 8001688: ed97 7a08 vldr s14, [r7, #32] + 800168c: edd7 7a05 vldr s15, [r7, #20] + 8001690: ee27 7a27 vmul.f32 s14, s14, s15 + 8001694: edd7 6a0a vldr s13, [r7, #40] @ 0x28 + 8001698: edd7 7a07 vldr s15, [r7, #28] + 800169c: ee66 7aa7 vmul.f32 s15, s13, s15 + 80016a0: ee37 7a27 vadd.f32 s14, s14, s15 + 80016a4: edd7 6a0b vldr s13, [r7, #44] @ 0x2c + 80016a8: edd7 7a06 vldr s15, [r7, #24] + 80016ac: ee66 7aa7 vmul.f32 s15, s13, s15 + 80016b0: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionQuaternion result = {.element = { + 80016b4: edc7 7a0d vstr s15, [r7, #52] @ 0x34 + .y = Q.w * V.y - Q.x * V.z + Q.z * V.x, + 80016b8: ed97 7a08 vldr s14, [r7, #32] + 80016bc: edd7 7a06 vldr s15, [r7, #24] + 80016c0: ee27 7a27 vmul.f32 s14, s14, s15 + 80016c4: edd7 6a09 vldr s13, [r7, #36] @ 0x24 + 80016c8: edd7 7a07 vldr s15, [r7, #28] + 80016cc: ee66 7aa7 vmul.f32 s15, s13, s15 + 80016d0: ee37 7a67 vsub.f32 s14, s14, s15 + 80016d4: edd7 6a0b vldr s13, [r7, #44] @ 0x2c + 80016d8: edd7 7a05 vldr s15, [r7, #20] + 80016dc: ee66 7aa7 vmul.f32 s15, s13, s15 + 80016e0: ee77 7a27 vadd.f32 s15, s14, s15 + const FusionQuaternion result = {.element = { + 80016e4: edc7 7a0e vstr s15, [r7, #56] @ 0x38 + .z = Q.w * V.z + Q.x * V.y - Q.y * V.x, + 80016e8: ed97 7a08 vldr s14, [r7, #32] + 80016ec: edd7 7a07 vldr s15, [r7, #28] + 80016f0: ee27 7a27 vmul.f32 s14, s14, s15 + 80016f4: edd7 6a09 vldr s13, [r7, #36] @ 0x24 + 80016f8: edd7 7a06 vldr s15, [r7, #24] + 80016fc: ee66 7aa7 vmul.f32 s15, s13, s15 + 8001700: ee37 7a27 vadd.f32 s14, s14, s15 + 8001704: edd7 6a0a vldr s13, [r7, #40] @ 0x28 + 8001708: edd7 7a05 vldr s15, [r7, #20] + 800170c: ee66 7aa7 vmul.f32 s15, s13, s15 + 8001710: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionQuaternion result = {.element = { + 8001714: edc7 7a0f vstr s15, [r7, #60] @ 0x3c + }}; + return result; + 8001718: f107 0440 add.w r4, r7, #64 @ 0x40 + 800171c: f107 0330 add.w r3, r7, #48 @ 0x30 + 8001720: cb0f ldmia r3, {r0, r1, r2, r3} + 8001722: e884 000f stmia.w r4, {r0, r1, r2, r3} + 8001726: 6c38 ldr r0, [r7, #64] @ 0x40 + 8001728: 6c79 ldr r1, [r7, #68] @ 0x44 + 800172a: 6cba ldr r2, [r7, #72] @ 0x48 + 800172c: 6cfb ldr r3, [r7, #76] @ 0x4c + 800172e: ee06 0a10 vmov s12, r0 + 8001732: ee06 1a90 vmov s13, r1 + 8001736: ee07 2a10 vmov s14, r2 + 800173a: ee07 3a90 vmov s15, r3 +#undef Q +#undef V +} + 800173e: eeb0 0a46 vmov.f32 s0, s12 + 8001742: eef0 0a66 vmov.f32 s1, s13 + 8001746: eeb0 1a47 vmov.f32 s2, s14 + 800174a: eef0 1a67 vmov.f32 s3, s15 + 800174e: 3750 adds r7, #80 @ 0x50 + 8001750: 46bd mov sp, r7 + 8001752: bc90 pop {r4, r7} + 8001754: 4770 bx lr + +08001756 : +/** + * @brief Returns the normalised quaternion. + * @param quaternion Quaternion. + * @return Normalised quaternion. + */ +static inline FusionQuaternion FusionQuaternionNormalise(const FusionQuaternion quaternion) { + 8001756: b590 push {r4, r7, lr} + 8001758: b093 sub sp, #76 @ 0x4c + 800175a: af00 add r7, sp, #0 + 800175c: eeb0 6a40 vmov.f32 s12, s0 + 8001760: eef0 6a60 vmov.f32 s13, s1 + 8001764: eeb0 7a41 vmov.f32 s14, s2 + 8001768: eef0 7a61 vmov.f32 s15, s3 + 800176c: ed87 6a04 vstr s12, [r7, #16] + 8001770: edc7 6a05 vstr s13, [r7, #20] + 8001774: ed87 7a06 vstr s14, [r7, #24] + 8001778: edc7 7a07 vstr s15, [r7, #28] +#define Q quaternion.element +#ifdef FUSION_USE_NORMAL_SQRT + const float magnitudeReciprocal = 1.0f / sqrtf(Q.w * Q.w + Q.x * Q.x + Q.y * Q.y + Q.z * Q.z); +#else + const float magnitudeReciprocal = FusionFastInverseSqrt(Q.w * Q.w + Q.x * Q.x + Q.y * Q.y + Q.z * Q.z); + 800177c: ed97 7a04 vldr s14, [r7, #16] + 8001780: edd7 7a04 vldr s15, [r7, #16] + 8001784: ee27 7a27 vmul.f32 s14, s14, s15 + 8001788: edd7 6a05 vldr s13, [r7, #20] + 800178c: edd7 7a05 vldr s15, [r7, #20] + 8001790: ee66 7aa7 vmul.f32 s15, s13, s15 + 8001794: ee37 7a27 vadd.f32 s14, s14, s15 + 8001798: edd7 6a06 vldr s13, [r7, #24] + 800179c: edd7 7a06 vldr s15, [r7, #24] + 80017a0: ee66 7aa7 vmul.f32 s15, s13, s15 + 80017a4: ee37 7a27 vadd.f32 s14, s14, s15 + 80017a8: edd7 6a07 vldr s13, [r7, #28] + 80017ac: edd7 7a07 vldr s15, [r7, #28] + 80017b0: ee66 7aa7 vmul.f32 s15, s13, s15 + 80017b4: ee77 7a27 vadd.f32 s15, s14, s15 + 80017b8: eeb0 0a67 vmov.f32 s0, s15 + 80017bc: f7ff fbe6 bl 8000f8c + 80017c0: ed87 0a11 vstr s0, [r7, #68] @ 0x44 +#endif + const FusionQuaternion result = {.element = { + .w = Q.w * magnitudeReciprocal, + 80017c4: ed97 7a04 vldr s14, [r7, #16] + 80017c8: edd7 7a11 vldr s15, [r7, #68] @ 0x44 + 80017cc: ee67 7a27 vmul.f32 s15, s14, s15 + const FusionQuaternion result = {.element = { + 80017d0: edc7 7a09 vstr s15, [r7, #36] @ 0x24 + .x = Q.x * magnitudeReciprocal, + 80017d4: ed97 7a05 vldr s14, [r7, #20] + 80017d8: edd7 7a11 vldr s15, [r7, #68] @ 0x44 + 80017dc: ee67 7a27 vmul.f32 s15, s14, s15 + const FusionQuaternion result = {.element = { + 80017e0: edc7 7a0a vstr s15, [r7, #40] @ 0x28 + .y = Q.y * magnitudeReciprocal, + 80017e4: ed97 7a06 vldr s14, [r7, #24] + 80017e8: edd7 7a11 vldr s15, [r7, #68] @ 0x44 + 80017ec: ee67 7a27 vmul.f32 s15, s14, s15 + const FusionQuaternion result = {.element = { + 80017f0: edc7 7a0b vstr s15, [r7, #44] @ 0x2c + .z = Q.z * magnitudeReciprocal, + 80017f4: ed97 7a07 vldr s14, [r7, #28] + 80017f8: edd7 7a11 vldr s15, [r7, #68] @ 0x44 + 80017fc: ee67 7a27 vmul.f32 s15, s14, s15 + const FusionQuaternion result = {.element = { + 8001800: edc7 7a0c vstr s15, [r7, #48] @ 0x30 + }}; + return result; + 8001804: f107 0434 add.w r4, r7, #52 @ 0x34 + 8001808: f107 0324 add.w r3, r7, #36 @ 0x24 + 800180c: cb0f ldmia r3, {r0, r1, r2, r3} + 800180e: e884 000f stmia.w r4, {r0, r1, r2, r3} + 8001812: 6b78 ldr r0, [r7, #52] @ 0x34 + 8001814: 6bb9 ldr r1, [r7, #56] @ 0x38 + 8001816: 6bfa ldr r2, [r7, #60] @ 0x3c + 8001818: 6c3b ldr r3, [r7, #64] @ 0x40 + 800181a: ee06 0a10 vmov s12, r0 + 800181e: ee06 1a90 vmov s13, r1 + 8001822: ee07 2a10 vmov s14, r2 + 8001826: ee07 3a90 vmov s15, r3 +#undef Q +} + 800182a: eeb0 0a46 vmov.f32 s0, s12 + 800182e: eef0 0a66 vmov.f32 s1, s13 + 8001832: eeb0 1a47 vmov.f32 s2, s14 + 8001836: eef0 1a67 vmov.f32 s3, s15 + 800183a: 374c adds r7, #76 @ 0x4c + 800183c: 46bd mov sp, r7 + 800183e: bd90 pop {r4, r7, pc} + +08001840 : + +/** + * @brief Initialises the AHRS algorithm² structure. + * @param ahrs AHRS algorithm structure. + */ +void FusionAhrsInitialise(FusionAhrs *const ahrs) { + 8001840: b5b0 push {r4, r5, r7, lr} + 8001842: b088 sub sp, #32 + 8001844: af00 add r7, sp, #0 + 8001846: 6078 str r0, [r7, #4] + const FusionAhrsSettings settings = { + 8001848: 4b0b ldr r3, [pc, #44] @ (8001878 ) + 800184a: f107 0408 add.w r4, r7, #8 + 800184e: 461d mov r5, r3 + 8001850: cd0f ldmia r5!, {r0, r1, r2, r3} + 8001852: c40f stmia r4!, {r0, r1, r2, r3} + 8001854: e895 0003 ldmia.w r5, {r0, r1} + 8001858: e884 0003 stmia.w r4, {r0, r1} + .gyroscopeRange = 0.0f, + .accelerationRejection = 90.0f, + .magneticRejection = 90.0f, + .recoveryTriggerPeriod = 0, + }; + FusionAhrsSetSettings(ahrs, &settings); + 800185c: f107 0308 add.w r3, r7, #8 + 8001860: 4619 mov r1, r3 + 8001862: 6878 ldr r0, [r7, #4] + 8001864: f000 f86e bl 8001944 + FusionAhrsReset(ahrs); + 8001868: 6878 ldr r0, [r7, #4] + 800186a: f000 f807 bl 800187c +} + 800186e: bf00 nop + 8001870: 3720 adds r7, #32 + 8001872: 46bd mov sp, r7 + 8001874: bdb0 pop {r4, r5, r7, pc} + 8001876: bf00 nop + 8001878: 0800b730 .word 0x0800b730 + +0800187c : +/** + * @brief Resets the AHRS algorithm. This is equivalent to reinitialising the + * algorithm while maintaining the current settings. + * @param ahrs AHRS algorithm structure. + */ +void FusionAhrsReset(FusionAhrs *const ahrs) { + 800187c: b480 push {r7} + 800187e: b091 sub sp, #68 @ 0x44 + 8001880: af00 add r7, sp, #0 + 8001882: 6078 str r0, [r7, #4] + ahrs->quaternion = FUSION_IDENTITY_QUATERNION; + 8001884: 687b ldr r3, [r7, #4] + 8001886: f04f 527e mov.w r2, #1065353216 @ 0x3f800000 + 800188a: 619a str r2, [r3, #24] + 800188c: 687b ldr r3, [r7, #4] + 800188e: f04f 0200 mov.w r2, #0 + 8001892: 61da str r2, [r3, #28] + 8001894: 687b ldr r3, [r7, #4] + 8001896: f04f 0200 mov.w r2, #0 + 800189a: 621a str r2, [r3, #32] + 800189c: 687b ldr r3, [r7, #4] + 800189e: f04f 0200 mov.w r2, #0 + 80018a2: 625a str r2, [r3, #36] @ 0x24 + ahrs->accelerometer = FUSION_VECTOR_ZERO; + 80018a4: 687b ldr r3, [r7, #4] + 80018a6: f04f 0200 mov.w r2, #0 + 80018aa: 629a str r2, [r3, #40] @ 0x28 + 80018ac: 687b ldr r3, [r7, #4] + 80018ae: f04f 0200 mov.w r2, #0 + 80018b2: 62da str r2, [r3, #44] @ 0x2c + 80018b4: 687b ldr r3, [r7, #4] + 80018b6: f04f 0200 mov.w r2, #0 + 80018ba: 631a str r2, [r3, #48] @ 0x30 + ahrs->initialising = true; + 80018bc: 687b ldr r3, [r7, #4] + 80018be: 2201 movs r2, #1 + 80018c0: f883 2034 strb.w r2, [r3, #52] @ 0x34 + ahrs->rampedGain = INITIAL_GAIN; + 80018c4: 687b ldr r3, [r7, #4] + 80018c6: 4a1e ldr r2, [pc, #120] @ (8001940 ) + 80018c8: 639a str r2, [r3, #56] @ 0x38 + ahrs->angularRateRecovery = false; + 80018ca: 687b ldr r3, [r7, #4] + 80018cc: 2200 movs r2, #0 + 80018ce: f883 2040 strb.w r2, [r3, #64] @ 0x40 + ahrs->halfAccelerometerFeedback = FUSION_VECTOR_ZERO; + 80018d2: 687b ldr r3, [r7, #4] + 80018d4: f04f 0200 mov.w r2, #0 + 80018d8: 645a str r2, [r3, #68] @ 0x44 + 80018da: 687b ldr r3, [r7, #4] + 80018dc: f04f 0200 mov.w r2, #0 + 80018e0: 649a str r2, [r3, #72] @ 0x48 + 80018e2: 687b ldr r3, [r7, #4] + 80018e4: f04f 0200 mov.w r2, #0 + 80018e8: 64da str r2, [r3, #76] @ 0x4c + ahrs->halfMagnetometerFeedback = FUSION_VECTOR_ZERO; + 80018ea: 687b ldr r3, [r7, #4] + 80018ec: f04f 0200 mov.w r2, #0 + 80018f0: 651a str r2, [r3, #80] @ 0x50 + 80018f2: 687b ldr r3, [r7, #4] + 80018f4: f04f 0200 mov.w r2, #0 + 80018f8: 655a str r2, [r3, #84] @ 0x54 + 80018fa: 687b ldr r3, [r7, #4] + 80018fc: f04f 0200 mov.w r2, #0 + 8001900: 659a str r2, [r3, #88] @ 0x58 + ahrs->accelerometerIgnored = false; + 8001902: 687b ldr r3, [r7, #4] + 8001904: 2200 movs r2, #0 + 8001906: f883 205c strb.w r2, [r3, #92] @ 0x5c + ahrs->accelerationRecoveryTrigger = 0; + 800190a: 687b ldr r3, [r7, #4] + 800190c: 2200 movs r2, #0 + 800190e: 661a str r2, [r3, #96] @ 0x60 + ahrs->accelerationRecoveryTimeout = ahrs->settings.recoveryTriggerPeriod; + 8001910: 687b ldr r3, [r7, #4] + 8001912: 695b ldr r3, [r3, #20] + 8001914: 461a mov r2, r3 + 8001916: 687b ldr r3, [r7, #4] + 8001918: 665a str r2, [r3, #100] @ 0x64 + ahrs->magnetometerIgnored = false; + 800191a: 687b ldr r3, [r7, #4] + 800191c: 2200 movs r2, #0 + 800191e: f883 2068 strb.w r2, [r3, #104] @ 0x68 + ahrs->magneticRecoveryTrigger = 0; + 8001922: 687b ldr r3, [r7, #4] + 8001924: 2200 movs r2, #0 + 8001926: 66da str r2, [r3, #108] @ 0x6c + ahrs->magneticRecoveryTimeout = ahrs->settings.recoveryTriggerPeriod; + 8001928: 687b ldr r3, [r7, #4] + 800192a: 695b ldr r3, [r3, #20] + 800192c: 461a mov r2, r3 + 800192e: 687b ldr r3, [r7, #4] + 8001930: 671a str r2, [r3, #112] @ 0x70 +} + 8001932: bf00 nop + 8001934: 3744 adds r7, #68 @ 0x44 + 8001936: 46bd mov sp, r7 + 8001938: f85d 7b04 ldr.w r7, [sp], #4 + 800193c: 4770 bx lr + 800193e: bf00 nop + 8001940: 41200000 .word 0x41200000 + +08001944 : +/** + * @brief Sets the AHRS algorithm settings. + * @param ahrs AHRS algorithm structure. + * @param settings Settings. + */ +void FusionAhrsSetSettings(FusionAhrs *const ahrs, const FusionAhrsSettings *const settings) { + 8001944: b580 push {r7, lr} + 8001946: b082 sub sp, #8 + 8001948: af00 add r7, sp, #0 + 800194a: 6078 str r0, [r7, #4] + 800194c: 6039 str r1, [r7, #0] + ahrs->settings.convention = settings->convention; + 800194e: 683b ldr r3, [r7, #0] + 8001950: 781a ldrb r2, [r3, #0] + 8001952: 687b ldr r3, [r7, #4] + 8001954: 701a strb r2, [r3, #0] + ahrs->settings.gain = settings->gain; + 8001956: 683b ldr r3, [r7, #0] + 8001958: 685a ldr r2, [r3, #4] + 800195a: 687b ldr r3, [r7, #4] + 800195c: 605a str r2, [r3, #4] + ahrs->settings.gyroscopeRange = settings->gyroscopeRange == 0.0f ? FLT_MAX : 0.98f * settings->gyroscopeRange; + 800195e: 683b ldr r3, [r7, #0] + 8001960: edd3 7a02 vldr s15, [r3, #8] + 8001964: eef5 7a40 vcmp.f32 s15, #0.0 + 8001968: eef1 fa10 vmrs APSR_nzcv, fpscr + 800196c: d007 beq.n 800197e + 800196e: 683b ldr r3, [r7, #0] + 8001970: edd3 7a02 vldr s15, [r3, #8] + 8001974: ed9f 7a4c vldr s14, [pc, #304] @ 8001aa8 + 8001978: ee67 7a87 vmul.f32 s15, s15, s14 + 800197c: e001 b.n 8001982 + 800197e: eddf 7a4b vldr s15, [pc, #300] @ 8001aac + 8001982: 687b ldr r3, [r7, #4] + 8001984: edc3 7a02 vstr s15, [r3, #8] + ahrs->settings.accelerationRejection = settings->accelerationRejection == 0.0f ? FLT_MAX : powf(0.5f * sinf(FusionDegreesToRadians(settings->accelerationRejection)), 2); + 8001988: 683b ldr r3, [r7, #0] + 800198a: edd3 7a03 vldr s15, [r3, #12] + 800198e: eef5 7a40 vcmp.f32 s15, #0.0 + 8001992: eef1 fa10 vmrs APSR_nzcv, fpscr + 8001996: d01b beq.n 80019d0 + 8001998: 683b ldr r3, [r7, #0] + 800199a: edd3 7a03 vldr s15, [r3, #12] + 800199e: eeb0 0a67 vmov.f32 s0, s15 + 80019a2: f7ff fa9f bl 8000ee4 + 80019a6: eef0 7a40 vmov.f32 s15, s0 + 80019aa: eeb0 0a67 vmov.f32 s0, s15 + 80019ae: f008 fc29 bl 800a204 + 80019b2: eef0 7a40 vmov.f32 s15, s0 + 80019b6: eeb6 7a00 vmov.f32 s14, #96 @ 0x3f000000 0.5 + 80019ba: ee67 7a87 vmul.f32 s15, s15, s14 + 80019be: eef0 0a00 vmov.f32 s1, #0 @ 0x40000000 2.0 + 80019c2: eeb0 0a67 vmov.f32 s0, s15 + 80019c6: f008 fb9f bl 800a108 + 80019ca: eef0 7a40 vmov.f32 s15, s0 + 80019ce: e001 b.n 80019d4 + 80019d0: eddf 7a36 vldr s15, [pc, #216] @ 8001aac + 80019d4: 687b ldr r3, [r7, #4] + 80019d6: edc3 7a03 vstr s15, [r3, #12] + ahrs->settings.magneticRejection = settings->magneticRejection == 0.0f ? FLT_MAX : powf(0.5f * sinf(FusionDegreesToRadians(settings->magneticRejection)), 2); + 80019da: 683b ldr r3, [r7, #0] + 80019dc: edd3 7a04 vldr s15, [r3, #16] + 80019e0: eef5 7a40 vcmp.f32 s15, #0.0 + 80019e4: eef1 fa10 vmrs APSR_nzcv, fpscr + 80019e8: d01b beq.n 8001a22 + 80019ea: 683b ldr r3, [r7, #0] + 80019ec: edd3 7a04 vldr s15, [r3, #16] + 80019f0: eeb0 0a67 vmov.f32 s0, s15 + 80019f4: f7ff fa76 bl 8000ee4 + 80019f8: eef0 7a40 vmov.f32 s15, s0 + 80019fc: eeb0 0a67 vmov.f32 s0, s15 + 8001a00: f008 fc00 bl 800a204 + 8001a04: eef0 7a40 vmov.f32 s15, s0 + 8001a08: eeb6 7a00 vmov.f32 s14, #96 @ 0x3f000000 0.5 + 8001a0c: ee67 7a87 vmul.f32 s15, s15, s14 + 8001a10: eef0 0a00 vmov.f32 s1, #0 @ 0x40000000 2.0 + 8001a14: eeb0 0a67 vmov.f32 s0, s15 + 8001a18: f008 fb76 bl 800a108 + 8001a1c: eef0 7a40 vmov.f32 s15, s0 + 8001a20: e001 b.n 8001a26 + 8001a22: eddf 7a22 vldr s15, [pc, #136] @ 8001aac + 8001a26: 687b ldr r3, [r7, #4] + 8001a28: edc3 7a04 vstr s15, [r3, #16] + ahrs->settings.recoveryTriggerPeriod = settings->recoveryTriggerPeriod; + 8001a2c: 683b ldr r3, [r7, #0] + 8001a2e: 695a ldr r2, [r3, #20] + 8001a30: 687b ldr r3, [r7, #4] + 8001a32: 615a str r2, [r3, #20] + ahrs->accelerationRecoveryTimeout = ahrs->settings.recoveryTriggerPeriod; + 8001a34: 687b ldr r3, [r7, #4] + 8001a36: 695b ldr r3, [r3, #20] + 8001a38: 461a mov r2, r3 + 8001a3a: 687b ldr r3, [r7, #4] + 8001a3c: 665a str r2, [r3, #100] @ 0x64 + ahrs->magneticRecoveryTimeout = ahrs->settings.recoveryTriggerPeriod; + 8001a3e: 687b ldr r3, [r7, #4] + 8001a40: 695b ldr r3, [r3, #20] + 8001a42: 461a mov r2, r3 + 8001a44: 687b ldr r3, [r7, #4] + 8001a46: 671a str r2, [r3, #112] @ 0x70 + if ((settings->gain == 0.0f) || (settings->recoveryTriggerPeriod == 0)) { // disable acceleration and magnetic rejection features if gain is zero + 8001a48: 683b ldr r3, [r7, #0] + 8001a4a: edd3 7a01 vldr s15, [r3, #4] + 8001a4e: eef5 7a40 vcmp.f32 s15, #0.0 + 8001a52: eef1 fa10 vmrs APSR_nzcv, fpscr + 8001a56: d003 beq.n 8001a60 + 8001a58: 683b ldr r3, [r7, #0] + 8001a5a: 695b ldr r3, [r3, #20] + 8001a5c: 2b00 cmp r3, #0 + 8001a5e: d105 bne.n 8001a6c + ahrs->settings.accelerationRejection = FLT_MAX; + 8001a60: 687b ldr r3, [r7, #4] + 8001a62: 4a13 ldr r2, [pc, #76] @ (8001ab0 ) + 8001a64: 60da str r2, [r3, #12] + ahrs->settings.magneticRejection = FLT_MAX; + 8001a66: 687b ldr r3, [r7, #4] + 8001a68: 4a11 ldr r2, [pc, #68] @ (8001ab0 ) + 8001a6a: 611a str r2, [r3, #16] + } + if (ahrs->initialising == false) { + 8001a6c: 687b ldr r3, [r7, #4] + 8001a6e: f893 3034 ldrb.w r3, [r3, #52] @ 0x34 + 8001a72: f083 0301 eor.w r3, r3, #1 + 8001a76: b2db uxtb r3, r3 + 8001a78: 2b00 cmp r3, #0 + 8001a7a: d003 beq.n 8001a84 + ahrs->rampedGain = ahrs->settings.gain; + 8001a7c: 687b ldr r3, [r7, #4] + 8001a7e: 685a ldr r2, [r3, #4] + 8001a80: 687b ldr r3, [r7, #4] + 8001a82: 639a str r2, [r3, #56] @ 0x38 + } + ahrs->rampedGainStep = (INITIAL_GAIN - ahrs->settings.gain) / INITIALISATION_PERIOD; + 8001a84: 687b ldr r3, [r7, #4] + 8001a86: edd3 7a01 vldr s15, [r3, #4] + 8001a8a: eeb2 7a04 vmov.f32 s14, #36 @ 0x41200000 10.0 + 8001a8e: ee37 7a67 vsub.f32 s14, s14, s15 + 8001a92: eef0 6a08 vmov.f32 s13, #8 @ 0x40400000 3.0 + 8001a96: eec7 7a26 vdiv.f32 s15, s14, s13 + 8001a9a: 687b ldr r3, [r7, #4] + 8001a9c: edc3 7a0f vstr s15, [r3, #60] @ 0x3c +} + 8001aa0: bf00 nop + 8001aa2: 3708 adds r7, #8 + 8001aa4: 46bd mov sp, r7 + 8001aa6: bd80 pop {r7, pc} + 8001aa8: 3f7ae148 .word 0x3f7ae148 + 8001aac: 7f7fffff .word 0x7f7fffff + 8001ab0: 7f7fffff .word 0x7f7fffff + +08001ab4 : + * @param gyroscope Gyroscope measurement in degrees per second. + * @param accelerometer Accelerometer measurement in g. + * @param magnetometer Magnetometer measurement in arbitrary units. + * @param deltaTime Delta time in seconds. + */ +void FusionAhrsUpdate(FusionAhrs *const ahrs, const FusionVector gyroscope, const FusionVector accelerometer, const FusionVector magnetometer, const float deltaTime) { + 8001ab4: b590 push {r4, r7, lr} + 8001ab6: b0bf sub sp, #252 @ 0xfc + 8001ab8: af00 add r7, sp, #0 + 8001aba: 62f8 str r0, [r7, #44] @ 0x2c + 8001abc: eeb0 5a61 vmov.f32 s10, s3 + 8001ac0: eef0 5a42 vmov.f32 s11, s4 + 8001ac4: eeb0 6a62 vmov.f32 s12, s5 + 8001ac8: eef0 6a43 vmov.f32 s13, s6 + 8001acc: eeb0 7a63 vmov.f32 s14, s7 + 8001ad0: eef0 7a44 vmov.f32 s15, s8 + 8001ad4: edc7 4a01 vstr s9, [r7, #4] + 8001ad8: ed87 0a08 vstr s0, [r7, #32] + 8001adc: edc7 0a09 vstr s1, [r7, #36] @ 0x24 + 8001ae0: ed87 1a0a vstr s2, [r7, #40] @ 0x28 + 8001ae4: ed87 5a05 vstr s10, [r7, #20] + 8001ae8: edc7 5a06 vstr s11, [r7, #24] + 8001aec: ed87 6a07 vstr s12, [r7, #28] + 8001af0: edc7 6a02 vstr s13, [r7, #8] + 8001af4: ed87 7a03 vstr s14, [r7, #12] + 8001af8: edc7 7a04 vstr s15, [r7, #16] +#define Q ahrs->quaternion.element + + // Store accelerometer + ahrs->accelerometer = accelerometer; + 8001afc: 6afb ldr r3, [r7, #44] @ 0x2c + 8001afe: 3328 adds r3, #40 @ 0x28 + 8001b00: f107 0214 add.w r2, r7, #20 + 8001b04: ca07 ldmia r2, {r0, r1, r2} + 8001b06: e883 0007 stmia.w r3, {r0, r1, r2} + + // Reinitialise if gyroscope range exceeded + if ((fabsf(gyroscope.axis.x) > ahrs->settings.gyroscopeRange) || (fabsf(gyroscope.axis.y) > ahrs->settings.gyroscopeRange) || (fabsf(gyroscope.axis.z) > ahrs->settings.gyroscopeRange)) { + 8001b0a: edd7 7a08 vldr s15, [r7, #32] + 8001b0e: eeb0 7ae7 vabs.f32 s14, s15 + 8001b12: 6afb ldr r3, [r7, #44] @ 0x2c + 8001b14: edd3 7a02 vldr s15, [r3, #8] + 8001b18: eeb4 7ae7 vcmpe.f32 s14, s15 + 8001b1c: eef1 fa10 vmrs APSR_nzcv, fpscr + 8001b20: dc17 bgt.n 8001b52 + 8001b22: edd7 7a09 vldr s15, [r7, #36] @ 0x24 + 8001b26: eeb0 7ae7 vabs.f32 s14, s15 + 8001b2a: 6afb ldr r3, [r7, #44] @ 0x2c + 8001b2c: edd3 7a02 vldr s15, [r3, #8] + 8001b30: eeb4 7ae7 vcmpe.f32 s14, s15 + 8001b34: eef1 fa10 vmrs APSR_nzcv, fpscr + 8001b38: dc0b bgt.n 8001b52 + 8001b3a: edd7 7a0a vldr s15, [r7, #40] @ 0x28 + 8001b3e: eeb0 7ae7 vabs.f32 s14, s15 + 8001b42: 6afb ldr r3, [r7, #44] @ 0x2c + 8001b44: edd3 7a02 vldr s15, [r3, #8] + 8001b48: eeb4 7ae7 vcmpe.f32 s14, s15 + 8001b4c: eef1 fa10 vmrs APSR_nzcv, fpscr + 8001b50: dd15 ble.n 8001b7e + const FusionQuaternion quaternion = ahrs->quaternion; + 8001b52: 6afb ldr r3, [r7, #44] @ 0x2c + 8001b54: f107 043c add.w r4, r7, #60 @ 0x3c + 8001b58: 3318 adds r3, #24 + 8001b5a: cb0f ldmia r3, {r0, r1, r2, r3} + 8001b5c: e884 000f stmia.w r4, {r0, r1, r2, r3} + FusionAhrsReset(ahrs); + 8001b60: 6af8 ldr r0, [r7, #44] @ 0x2c + 8001b62: f7ff fe8b bl 800187c + ahrs->quaternion = quaternion; + 8001b66: 6afb ldr r3, [r7, #44] @ 0x2c + 8001b68: f103 0418 add.w r4, r3, #24 + 8001b6c: f107 033c add.w r3, r7, #60 @ 0x3c + 8001b70: cb0f ldmia r3, {r0, r1, r2, r3} + 8001b72: e884 000f stmia.w r4, {r0, r1, r2, r3} + ahrs->angularRateRecovery = true; + 8001b76: 6afb ldr r3, [r7, #44] @ 0x2c + 8001b78: 2201 movs r2, #1 + 8001b7a: f883 2040 strb.w r2, [r3, #64] @ 0x40 + } + + // Ramp down gain during initialisation + if (ahrs->initialising) { + 8001b7e: 6afb ldr r3, [r7, #44] @ 0x2c + 8001b80: f893 3034 ldrb.w r3, [r3, #52] @ 0x34 + 8001b84: 2b00 cmp r3, #0 + 8001b86: d02d beq.n 8001be4 + ahrs->rampedGain -= ahrs->rampedGainStep * deltaTime; + 8001b88: 6afb ldr r3, [r7, #44] @ 0x2c + 8001b8a: ed93 7a0e vldr s14, [r3, #56] @ 0x38 + 8001b8e: 6afb ldr r3, [r7, #44] @ 0x2c + 8001b90: edd3 6a0f vldr s13, [r3, #60] @ 0x3c + 8001b94: edd7 7a01 vldr s15, [r7, #4] + 8001b98: ee66 7aa7 vmul.f32 s15, s13, s15 + 8001b9c: ee77 7a67 vsub.f32 s15, s14, s15 + 8001ba0: 6afb ldr r3, [r7, #44] @ 0x2c + 8001ba2: edc3 7a0e vstr s15, [r3, #56] @ 0x38 + if ((ahrs->rampedGain < ahrs->settings.gain) || (ahrs->settings.gain == 0.0f)) { + 8001ba6: 6afb ldr r3, [r7, #44] @ 0x2c + 8001ba8: ed93 7a0e vldr s14, [r3, #56] @ 0x38 + 8001bac: 6afb ldr r3, [r7, #44] @ 0x2c + 8001bae: edd3 7a01 vldr s15, [r3, #4] + 8001bb2: eeb4 7ae7 vcmpe.f32 s14, s15 + 8001bb6: eef1 fa10 vmrs APSR_nzcv, fpscr + 8001bba: d407 bmi.n 8001bcc + 8001bbc: 6afb ldr r3, [r7, #44] @ 0x2c + 8001bbe: edd3 7a01 vldr s15, [r3, #4] + 8001bc2: eef5 7a40 vcmp.f32 s15, #0.0 + 8001bc6: eef1 fa10 vmrs APSR_nzcv, fpscr + 8001bca: d10b bne.n 8001be4 + ahrs->rampedGain = ahrs->settings.gain; + 8001bcc: 6afb ldr r3, [r7, #44] @ 0x2c + 8001bce: 685a ldr r2, [r3, #4] + 8001bd0: 6afb ldr r3, [r7, #44] @ 0x2c + 8001bd2: 639a str r2, [r3, #56] @ 0x38 + ahrs->initialising = false; + 8001bd4: 6afb ldr r3, [r7, #44] @ 0x2c + 8001bd6: 2200 movs r2, #0 + 8001bd8: f883 2034 strb.w r2, [r3, #52] @ 0x34 + ahrs->angularRateRecovery = false; + 8001bdc: 6afb ldr r3, [r7, #44] @ 0x2c + 8001bde: 2200 movs r2, #0 + 8001be0: f883 2040 strb.w r2, [r3, #64] @ 0x40 + } + } + + // Calculate direction of gravity indicated by algorithm + const FusionVector halfGravity = HalfGravity(ahrs); + 8001be4: 6af8 ldr r0, [r7, #44] @ 0x2c + 8001be6: f000 faf4 bl 80021d2 + 8001bea: eef0 6a40 vmov.f32 s13, s0 + 8001bee: eeb0 7a60 vmov.f32 s14, s1 + 8001bf2: eef0 7a41 vmov.f32 s15, s2 + 8001bf6: edc7 6a25 vstr s13, [r7, #148] @ 0x94 + 8001bfa: ed87 7a26 vstr s14, [r7, #152] @ 0x98 + 8001bfe: edc7 7a27 vstr s15, [r7, #156] @ 0x9c + + // Calculate accelerometer feedback + FusionVector halfAccelerometerFeedback = FUSION_VECTOR_ZERO; + 8001c02: f04f 0300 mov.w r3, #0 + 8001c06: f8c7 3088 str.w r3, [r7, #136] @ 0x88 + 8001c0a: f04f 0300 mov.w r3, #0 + 8001c0e: f8c7 308c str.w r3, [r7, #140] @ 0x8c + 8001c12: f04f 0300 mov.w r3, #0 + 8001c16: f8c7 3090 str.w r3, [r7, #144] @ 0x90 + ahrs->accelerometerIgnored = true; + 8001c1a: 6afb ldr r3, [r7, #44] @ 0x2c + 8001c1c: 2201 movs r2, #1 + 8001c1e: f883 205c strb.w r2, [r3, #92] @ 0x5c + if (FusionVectorIsZero(accelerometer) == false) { + 8001c22: edd7 6a05 vldr s13, [r7, #20] + 8001c26: ed97 7a06 vldr s14, [r7, #24] + 8001c2a: edd7 7a07 vldr s15, [r7, #28] + 8001c2e: eeb0 0a66 vmov.f32 s0, s13 + 8001c32: eef0 0a47 vmov.f32 s1, s14 + 8001c36: eeb0 1a67 vmov.f32 s2, s15 + 8001c3a: f7ff f9d7 bl 8000fec + 8001c3e: 4603 mov r3, r0 + 8001c40: f083 0301 eor.w r3, r3, #1 + 8001c44: b2db uxtb r3, r3 + 8001c46: 2b00 cmp r3, #0 + 8001c48: f000 809c beq.w 8001d84 + + // Calculate accelerometer feedback scaled by 0.5 + ahrs->halfAccelerometerFeedback = Feedback(FusionVectorNormalise(accelerometer), halfGravity); + 8001c4c: edd7 6a05 vldr s13, [r7, #20] + 8001c50: ed97 7a06 vldr s14, [r7, #24] + 8001c54: edd7 7a07 vldr s15, [r7, #28] + 8001c58: eeb0 0a66 vmov.f32 s0, s13 + 8001c5c: eef0 0a47 vmov.f32 s1, s14 + 8001c60: eeb0 1a67 vmov.f32 s2, s15 + 8001c64: f7ff fc22 bl 80014ac + 8001c68: eef0 6a40 vmov.f32 s13, s0 + 8001c6c: eeb0 7a60 vmov.f32 s14, s1 + 8001c70: eef0 7a41 vmov.f32 s15, s2 + 8001c74: edc7 6a28 vstr s13, [r7, #160] @ 0xa0 + 8001c78: ed87 7a29 vstr s14, [r7, #164] @ 0xa4 + 8001c7c: edc7 7a2a vstr s15, [r7, #168] @ 0xa8 + 8001c80: 6afc ldr r4, [r7, #44] @ 0x2c + 8001c82: ed97 5a25 vldr s10, [r7, #148] @ 0x94 + 8001c86: edd7 5a26 vldr s11, [r7, #152] @ 0x98 + 8001c8a: ed97 6a27 vldr s12, [r7, #156] @ 0x9c + 8001c8e: edd7 6a28 vldr s13, [r7, #160] @ 0xa0 + 8001c92: ed97 7a29 vldr s14, [r7, #164] @ 0xa4 + 8001c96: edd7 7a2a vldr s15, [r7, #168] @ 0xa8 + 8001c9a: eef0 1a45 vmov.f32 s3, s10 + 8001c9e: eeb0 2a65 vmov.f32 s4, s11 + 8001ca2: eef0 2a46 vmov.f32 s5, s12 + 8001ca6: eeb0 0a66 vmov.f32 s0, s13 + 8001caa: eef0 0a47 vmov.f32 s1, s14 + 8001cae: eeb0 1a67 vmov.f32 s2, s15 + 8001cb2: f000 fc55 bl 8002560 + 8001cb6: eef0 6a40 vmov.f32 s13, s0 + 8001cba: eeb0 7a60 vmov.f32 s14, s1 + 8001cbe: eef0 7a41 vmov.f32 s15, s2 + 8001cc2: edc4 6a11 vstr s13, [r4, #68] @ 0x44 + 8001cc6: ed84 7a12 vstr s14, [r4, #72] @ 0x48 + 8001cca: edc4 7a13 vstr s15, [r4, #76] @ 0x4c + + // Don't ignore accelerometer if acceleration error below threshold + if (ahrs->initialising || ((FusionVectorMagnitudeSquared(ahrs->halfAccelerometerFeedback) <= ahrs->settings.accelerationRejection))) { + 8001cce: 6afb ldr r3, [r7, #44] @ 0x2c + 8001cd0: f893 3034 ldrb.w r3, [r3, #52] @ 0x34 + 8001cd4: 2b00 cmp r3, #0 + 8001cd6: d118 bne.n 8001d0a + 8001cd8: 6afb ldr r3, [r7, #44] @ 0x2c + 8001cda: edd3 6a11 vldr s13, [r3, #68] @ 0x44 + 8001cde: ed93 7a12 vldr s14, [r3, #72] @ 0x48 + 8001ce2: edd3 7a13 vldr s15, [r3, #76] @ 0x4c + 8001ce6: eeb0 0a66 vmov.f32 s0, s13 + 8001cea: eef0 0a47 vmov.f32 s1, s14 + 8001cee: eeb0 1a67 vmov.f32 s2, s15 + 8001cf2: f7ff fb67 bl 80013c4 + 8001cf6: eeb0 7a40 vmov.f32 s14, s0 + 8001cfa: 6afb ldr r3, [r7, #44] @ 0x2c + 8001cfc: edd3 7a03 vldr s15, [r3, #12] + 8001d00: eeb4 7ae7 vcmpe.f32 s14, s15 + 8001d04: eef1 fa10 vmrs APSR_nzcv, fpscr + 8001d08: d80a bhi.n 8001d20 + ahrs->accelerometerIgnored = false; + 8001d0a: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d0c: 2200 movs r2, #0 + 8001d0e: f883 205c strb.w r2, [r3, #92] @ 0x5c + ahrs->accelerationRecoveryTrigger -= 9; + 8001d12: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d14: 6e1b ldr r3, [r3, #96] @ 0x60 + 8001d16: f1a3 0209 sub.w r2, r3, #9 + 8001d1a: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d1c: 661a str r2, [r3, #96] @ 0x60 + 8001d1e: e004 b.n 8001d2a + } else { + ahrs->accelerationRecoveryTrigger += 1; + 8001d20: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d22: 6e1b ldr r3, [r3, #96] @ 0x60 + 8001d24: 1c5a adds r2, r3, #1 + 8001d26: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d28: 661a str r2, [r3, #96] @ 0x60 + } + + // Don't ignore accelerometer during acceleration recovery + if (ahrs->accelerationRecoveryTrigger > ahrs->accelerationRecoveryTimeout) { + 8001d2a: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d2c: 6e1a ldr r2, [r3, #96] @ 0x60 + 8001d2e: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d30: 6e5b ldr r3, [r3, #100] @ 0x64 + 8001d32: 429a cmp r2, r3 + 8001d34: dd07 ble.n 8001d46 + ahrs->accelerationRecoveryTimeout = 0; + 8001d36: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d38: 2200 movs r2, #0 + 8001d3a: 665a str r2, [r3, #100] @ 0x64 + ahrs->accelerometerIgnored = false; + 8001d3c: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d3e: 2200 movs r2, #0 + 8001d40: f883 205c strb.w r2, [r3, #92] @ 0x5c + 8001d44: e004 b.n 8001d50 + } else { + ahrs->accelerationRecoveryTimeout = ahrs->settings.recoveryTriggerPeriod; + 8001d46: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d48: 695b ldr r3, [r3, #20] + 8001d4a: 461a mov r2, r3 + 8001d4c: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d4e: 665a str r2, [r3, #100] @ 0x64 + } + ahrs->accelerationRecoveryTrigger = Clamp(ahrs->accelerationRecoveryTrigger, 0, ahrs->settings.recoveryTriggerPeriod); + 8001d50: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d52: 6e18 ldr r0, [r3, #96] @ 0x60 + 8001d54: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d56: 695b ldr r3, [r3, #20] + 8001d58: 461a mov r2, r3 + 8001d5a: 2100 movs r1, #0 + 8001d5c: f000 fcb5 bl 80026ca + 8001d60: 4602 mov r2, r0 + 8001d62: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d64: 661a str r2, [r3, #96] @ 0x60 + + // Apply accelerometer feedback + if (ahrs->accelerometerIgnored == false) { + 8001d66: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d68: f893 305c ldrb.w r3, [r3, #92] @ 0x5c + 8001d6c: f083 0301 eor.w r3, r3, #1 + 8001d70: b2db uxtb r3, r3 + 8001d72: 2b00 cmp r3, #0 + 8001d74: d006 beq.n 8001d84 + halfAccelerometerFeedback = ahrs->halfAccelerometerFeedback; + 8001d76: 6afa ldr r2, [r7, #44] @ 0x2c + 8001d78: f107 0388 add.w r3, r7, #136 @ 0x88 + 8001d7c: 3244 adds r2, #68 @ 0x44 + 8001d7e: ca07 ldmia r2, {r0, r1, r2} + 8001d80: e883 0007 stmia.w r3, {r0, r1, r2} + } + } + + // Calculate magnetometer feedback + FusionVector halfMagnetometerFeedback = FUSION_VECTOR_ZERO; + 8001d84: f04f 0300 mov.w r3, #0 + 8001d88: 673b str r3, [r7, #112] @ 0x70 + 8001d8a: f04f 0300 mov.w r3, #0 + 8001d8e: 677b str r3, [r7, #116] @ 0x74 + 8001d90: f04f 0300 mov.w r3, #0 + 8001d94: 67bb str r3, [r7, #120] @ 0x78 + ahrs->magnetometerIgnored = true; + 8001d96: 6afb ldr r3, [r7, #44] @ 0x2c + 8001d98: 2201 movs r2, #1 + 8001d9a: f883 2068 strb.w r2, [r3, #104] @ 0x68 + if (FusionVectorIsZero(magnetometer) == false) { + 8001d9e: edd7 6a02 vldr s13, [r7, #8] + 8001da2: ed97 7a03 vldr s14, [r7, #12] + 8001da6: edd7 7a04 vldr s15, [r7, #16] + 8001daa: eeb0 0a66 vmov.f32 s0, s13 + 8001dae: eef0 0a47 vmov.f32 s1, s14 + 8001db2: eeb0 1a67 vmov.f32 s2, s15 + 8001db6: f7ff f919 bl 8000fec + 8001dba: 4603 mov r3, r0 + 8001dbc: f083 0301 eor.w r3, r3, #1 + 8001dc0: b2db uxtb r3, r3 + 8001dc2: 2b00 cmp r3, #0 + 8001dc4: f000 80d1 beq.w 8001f6a + + // Calculate direction of magnetic field indicated by algorithm + const FusionVector halfMagnetic = HalfMagnetic(ahrs); + 8001dc8: 6af8 ldr r0, [r7, #44] @ 0x2c + 8001dca: f000 fabf bl 800234c + 8001dce: eef0 6a40 vmov.f32 s13, s0 + 8001dd2: eeb0 7a60 vmov.f32 s14, s1 + 8001dd6: eef0 7a41 vmov.f32 s15, s2 + 8001dda: edc7 6a0c vstr s13, [r7, #48] @ 0x30 + 8001dde: ed87 7a0d vstr s14, [r7, #52] @ 0x34 + 8001de2: edc7 7a0e vstr s15, [r7, #56] @ 0x38 + + // Calculate magnetometer feedback scaled by 0.5 + ahrs->halfMagnetometerFeedback = Feedback(FusionVectorNormalise(FusionVectorCrossProduct(halfGravity, magnetometer)), halfMagnetic); + 8001de6: ed97 5a02 vldr s10, [r7, #8] + 8001dea: edd7 5a03 vldr s11, [r7, #12] + 8001dee: ed97 6a04 vldr s12, [r7, #16] + 8001df2: edd7 6a25 vldr s13, [r7, #148] @ 0x94 + 8001df6: ed97 7a26 vldr s14, [r7, #152] @ 0x98 + 8001dfa: edd7 7a27 vldr s15, [r7, #156] @ 0x9c + 8001dfe: eef0 1a45 vmov.f32 s3, s10 + 8001e02: eeb0 2a65 vmov.f32 s4, s11 + 8001e06: eef0 2a46 vmov.f32 s5, s12 + 8001e0a: eeb0 0a66 vmov.f32 s0, s13 + 8001e0e: eef0 0a47 vmov.f32 s1, s14 + 8001e12: eeb0 1a67 vmov.f32 s2, s15 + 8001e16: f7ff fa19 bl 800124c + 8001e1a: eef0 6a40 vmov.f32 s13, s0 + 8001e1e: eeb0 7a60 vmov.f32 s14, s1 + 8001e22: eef0 7a41 vmov.f32 s15, s2 + 8001e26: edc7 6a2b vstr s13, [r7, #172] @ 0xac + 8001e2a: ed87 7a2c vstr s14, [r7, #176] @ 0xb0 + 8001e2e: edc7 7a2d vstr s15, [r7, #180] @ 0xb4 + 8001e32: edd7 6a2b vldr s13, [r7, #172] @ 0xac + 8001e36: ed97 7a2c vldr s14, [r7, #176] @ 0xb0 + 8001e3a: edd7 7a2d vldr s15, [r7, #180] @ 0xb4 + 8001e3e: eeb0 0a66 vmov.f32 s0, s13 + 8001e42: eef0 0a47 vmov.f32 s1, s14 + 8001e46: eeb0 1a67 vmov.f32 s2, s15 + 8001e4a: f7ff fb2f bl 80014ac + 8001e4e: eef0 6a40 vmov.f32 s13, s0 + 8001e52: eeb0 7a60 vmov.f32 s14, s1 + 8001e56: eef0 7a41 vmov.f32 s15, s2 + 8001e5a: edc7 6a2e vstr s13, [r7, #184] @ 0xb8 + 8001e5e: ed87 7a2f vstr s14, [r7, #188] @ 0xbc + 8001e62: edc7 7a30 vstr s15, [r7, #192] @ 0xc0 + 8001e66: 6afc ldr r4, [r7, #44] @ 0x2c + 8001e68: ed97 5a0c vldr s10, [r7, #48] @ 0x30 + 8001e6c: edd7 5a0d vldr s11, [r7, #52] @ 0x34 + 8001e70: ed97 6a0e vldr s12, [r7, #56] @ 0x38 + 8001e74: edd7 6a2e vldr s13, [r7, #184] @ 0xb8 + 8001e78: ed97 7a2f vldr s14, [r7, #188] @ 0xbc + 8001e7c: edd7 7a30 vldr s15, [r7, #192] @ 0xc0 + 8001e80: eef0 1a45 vmov.f32 s3, s10 + 8001e84: eeb0 2a65 vmov.f32 s4, s11 + 8001e88: eef0 2a46 vmov.f32 s5, s12 + 8001e8c: eeb0 0a66 vmov.f32 s0, s13 + 8001e90: eef0 0a47 vmov.f32 s1, s14 + 8001e94: eeb0 1a67 vmov.f32 s2, s15 + 8001e98: f000 fb62 bl 8002560 + 8001e9c: eef0 6a40 vmov.f32 s13, s0 + 8001ea0: eeb0 7a60 vmov.f32 s14, s1 + 8001ea4: eef0 7a41 vmov.f32 s15, s2 + 8001ea8: edc4 6a14 vstr s13, [r4, #80] @ 0x50 + 8001eac: ed84 7a15 vstr s14, [r4, #84] @ 0x54 + 8001eb0: edc4 7a16 vstr s15, [r4, #88] @ 0x58 + + // Don't ignore magnetometer if magnetic error below threshold + if (ahrs->initialising || ((FusionVectorMagnitudeSquared(ahrs->halfMagnetometerFeedback) <= ahrs->settings.magneticRejection))) { + 8001eb4: 6afb ldr r3, [r7, #44] @ 0x2c + 8001eb6: f893 3034 ldrb.w r3, [r3, #52] @ 0x34 + 8001eba: 2b00 cmp r3, #0 + 8001ebc: d118 bne.n 8001ef0 + 8001ebe: 6afb ldr r3, [r7, #44] @ 0x2c + 8001ec0: edd3 6a14 vldr s13, [r3, #80] @ 0x50 + 8001ec4: ed93 7a15 vldr s14, [r3, #84] @ 0x54 + 8001ec8: edd3 7a16 vldr s15, [r3, #88] @ 0x58 + 8001ecc: eeb0 0a66 vmov.f32 s0, s13 + 8001ed0: eef0 0a47 vmov.f32 s1, s14 + 8001ed4: eeb0 1a67 vmov.f32 s2, s15 + 8001ed8: f7ff fa74 bl 80013c4 + 8001edc: eeb0 7a40 vmov.f32 s14, s0 + 8001ee0: 6afb ldr r3, [r7, #44] @ 0x2c + 8001ee2: edd3 7a04 vldr s15, [r3, #16] + 8001ee6: eeb4 7ae7 vcmpe.f32 s14, s15 + 8001eea: eef1 fa10 vmrs APSR_nzcv, fpscr + 8001eee: d80a bhi.n 8001f06 + ahrs->magnetometerIgnored = false; + 8001ef0: 6afb ldr r3, [r7, #44] @ 0x2c + 8001ef2: 2200 movs r2, #0 + 8001ef4: f883 2068 strb.w r2, [r3, #104] @ 0x68 + ahrs->magneticRecoveryTrigger -= 9; + 8001ef8: 6afb ldr r3, [r7, #44] @ 0x2c + 8001efa: 6edb ldr r3, [r3, #108] @ 0x6c + 8001efc: f1a3 0209 sub.w r2, r3, #9 + 8001f00: 6afb ldr r3, [r7, #44] @ 0x2c + 8001f02: 66da str r2, [r3, #108] @ 0x6c + 8001f04: e004 b.n 8001f10 + } else { + ahrs->magneticRecoveryTrigger += 1; + 8001f06: 6afb ldr r3, [r7, #44] @ 0x2c + 8001f08: 6edb ldr r3, [r3, #108] @ 0x6c + 8001f0a: 1c5a adds r2, r3, #1 + 8001f0c: 6afb ldr r3, [r7, #44] @ 0x2c + 8001f0e: 66da str r2, [r3, #108] @ 0x6c + } + + // Don't ignore magnetometer during magnetic recovery + if (ahrs->magneticRecoveryTrigger > ahrs->magneticRecoveryTimeout) { + 8001f10: 6afb ldr r3, [r7, #44] @ 0x2c + 8001f12: 6eda ldr r2, [r3, #108] @ 0x6c + 8001f14: 6afb ldr r3, [r7, #44] @ 0x2c + 8001f16: 6f1b ldr r3, [r3, #112] @ 0x70 + 8001f18: 429a cmp r2, r3 + 8001f1a: dd07 ble.n 8001f2c + ahrs->magneticRecoveryTimeout = 0; + 8001f1c: 6afb ldr r3, [r7, #44] @ 0x2c + 8001f1e: 2200 movs r2, #0 + 8001f20: 671a str r2, [r3, #112] @ 0x70 + ahrs->magnetometerIgnored = false; + 8001f22: 6afb ldr r3, [r7, #44] @ 0x2c + 8001f24: 2200 movs r2, #0 + 8001f26: f883 2068 strb.w r2, [r3, #104] @ 0x68 + 8001f2a: e004 b.n 8001f36 + } else { + ahrs->magneticRecoveryTimeout = ahrs->settings.recoveryTriggerPeriod; + 8001f2c: 6afb ldr r3, [r7, #44] @ 0x2c + 8001f2e: 695b ldr r3, [r3, #20] + 8001f30: 461a mov r2, r3 + 8001f32: 6afb ldr r3, [r7, #44] @ 0x2c + 8001f34: 671a str r2, [r3, #112] @ 0x70 + } + ahrs->magneticRecoveryTrigger = Clamp(ahrs->magneticRecoveryTrigger, 0, ahrs->settings.recoveryTriggerPeriod); + 8001f36: 6afb ldr r3, [r7, #44] @ 0x2c + 8001f38: 6ed8 ldr r0, [r3, #108] @ 0x6c + 8001f3a: 6afb ldr r3, [r7, #44] @ 0x2c + 8001f3c: 695b ldr r3, [r3, #20] + 8001f3e: 461a mov r2, r3 + 8001f40: 2100 movs r1, #0 + 8001f42: f000 fbc2 bl 80026ca + 8001f46: 4602 mov r2, r0 + 8001f48: 6afb ldr r3, [r7, #44] @ 0x2c + 8001f4a: 66da str r2, [r3, #108] @ 0x6c + + // Apply magnetometer feedback + if (ahrs->magnetometerIgnored == false) { + 8001f4c: 6afb ldr r3, [r7, #44] @ 0x2c + 8001f4e: f893 3068 ldrb.w r3, [r3, #104] @ 0x68 + 8001f52: f083 0301 eor.w r3, r3, #1 + 8001f56: b2db uxtb r3, r3 + 8001f58: 2b00 cmp r3, #0 + 8001f5a: d006 beq.n 8001f6a + halfMagnetometerFeedback = ahrs->halfMagnetometerFeedback; + 8001f5c: 6afa ldr r2, [r7, #44] @ 0x2c + 8001f5e: f107 0370 add.w r3, r7, #112 @ 0x70 + 8001f62: 3250 adds r2, #80 @ 0x50 + 8001f64: ca07 ldmia r2, {r0, r1, r2} + 8001f66: e883 0007 stmia.w r3, {r0, r1, r2} + } + } + + // Convert gyroscope to radians per second scaled by 0.5 + const FusionVector halfGyroscope = FusionVectorMultiplyScalar(gyroscope, FusionDegreesToRadians(0.5f)); + 8001f6a: eeb6 0a00 vmov.f32 s0, #96 @ 0x3f000000 0.5 + 8001f6e: f7fe ffb9 bl 8000ee4 + 8001f72: eeb0 6a40 vmov.f32 s12, s0 + 8001f76: edd7 6a08 vldr s13, [r7, #32] + 8001f7a: ed97 7a09 vldr s14, [r7, #36] @ 0x24 + 8001f7e: edd7 7a0a vldr s15, [r7, #40] @ 0x28 + 8001f82: eef0 1a46 vmov.f32 s3, s12 + 8001f86: eeb0 0a66 vmov.f32 s0, s13 + 8001f8a: eef0 0a47 vmov.f32 s1, s14 + 8001f8e: eeb0 1a67 vmov.f32 s2, s15 + 8001f92: f7ff f8c9 bl 8001128 + 8001f96: eef0 6a40 vmov.f32 s13, s0 + 8001f9a: eeb0 7a60 vmov.f32 s14, s1 + 8001f9e: eef0 7a41 vmov.f32 s15, s2 + 8001fa2: edc7 6a16 vstr s13, [r7, #88] @ 0x58 + 8001fa6: ed87 7a17 vstr s14, [r7, #92] @ 0x5c + 8001faa: edc7 7a18 vstr s15, [r7, #96] @ 0x60 + + // Apply feedback to gyroscope + const FusionVector adjustedHalfGyroscope = FusionVectorAdd(halfGyroscope, FusionVectorMultiplyScalar(FusionVectorAdd(halfAccelerometerFeedback, halfMagnetometerFeedback), ahrs->rampedGain)); + 8001fae: ed97 5a1c vldr s10, [r7, #112] @ 0x70 + 8001fb2: edd7 5a1d vldr s11, [r7, #116] @ 0x74 + 8001fb6: ed97 6a1e vldr s12, [r7, #120] @ 0x78 + 8001fba: edd7 6a22 vldr s13, [r7, #136] @ 0x88 + 8001fbe: ed97 7a23 vldr s14, [r7, #140] @ 0x8c + 8001fc2: edd7 7a24 vldr s15, [r7, #144] @ 0x90 + 8001fc6: eef0 1a45 vmov.f32 s3, s10 + 8001fca: eeb0 2a65 vmov.f32 s4, s11 + 8001fce: eef0 2a46 vmov.f32 s5, s12 + 8001fd2: eeb0 0a66 vmov.f32 s0, s13 + 8001fd6: eef0 0a47 vmov.f32 s1, s14 + 8001fda: eeb0 1a67 vmov.f32 s2, s15 + 8001fde: f7ff f835 bl 800104c + 8001fe2: eef0 6a40 vmov.f32 s13, s0 + 8001fe6: eeb0 7a60 vmov.f32 s14, s1 + 8001fea: eef0 7a41 vmov.f32 s15, s2 + 8001fee: edc7 6a31 vstr s13, [r7, #196] @ 0xc4 + 8001ff2: ed87 7a32 vstr s14, [r7, #200] @ 0xc8 + 8001ff6: edc7 7a33 vstr s15, [r7, #204] @ 0xcc + 8001ffa: 6afb ldr r3, [r7, #44] @ 0x2c + 8001ffc: ed93 6a0e vldr s12, [r3, #56] @ 0x38 + 8002000: edd7 6a31 vldr s13, [r7, #196] @ 0xc4 + 8002004: ed97 7a32 vldr s14, [r7, #200] @ 0xc8 + 8002008: edd7 7a33 vldr s15, [r7, #204] @ 0xcc + 800200c: eef0 1a46 vmov.f32 s3, s12 + 8002010: eeb0 0a66 vmov.f32 s0, s13 + 8002014: eef0 0a47 vmov.f32 s1, s14 + 8002018: eeb0 1a67 vmov.f32 s2, s15 + 800201c: f7ff f884 bl 8001128 + 8002020: eef0 6a40 vmov.f32 s13, s0 + 8002024: eeb0 7a60 vmov.f32 s14, s1 + 8002028: eef0 7a41 vmov.f32 s15, s2 + 800202c: edc7 6a34 vstr s13, [r7, #208] @ 0xd0 + 8002030: ed87 7a35 vstr s14, [r7, #212] @ 0xd4 + 8002034: edc7 7a36 vstr s15, [r7, #216] @ 0xd8 + 8002038: ed97 5a34 vldr s10, [r7, #208] @ 0xd0 + 800203c: edd7 5a35 vldr s11, [r7, #212] @ 0xd4 + 8002040: ed97 6a36 vldr s12, [r7, #216] @ 0xd8 + 8002044: edd7 6a16 vldr s13, [r7, #88] @ 0x58 + 8002048: ed97 7a17 vldr s14, [r7, #92] @ 0x5c + 800204c: edd7 7a18 vldr s15, [r7, #96] @ 0x60 + 8002050: eef0 1a45 vmov.f32 s3, s10 + 8002054: eeb0 2a65 vmov.f32 s4, s11 + 8002058: eef0 2a46 vmov.f32 s5, s12 + 800205c: eeb0 0a66 vmov.f32 s0, s13 + 8002060: eef0 0a47 vmov.f32 s1, s14 + 8002064: eeb0 1a67 vmov.f32 s2, s15 + 8002068: f7fe fff0 bl 800104c + 800206c: eef0 6a40 vmov.f32 s13, s0 + 8002070: eeb0 7a60 vmov.f32 s14, s1 + 8002074: eef0 7a41 vmov.f32 s15, s2 + 8002078: edc7 6a13 vstr s13, [r7, #76] @ 0x4c + 800207c: ed87 7a14 vstr s14, [r7, #80] @ 0x50 + 8002080: edc7 7a15 vstr s15, [r7, #84] @ 0x54 + + // Integrate rate of change of quaternion + ahrs->quaternion = FusionQuaternionAdd(ahrs->quaternion, FusionQuaternionMultiplyVector(ahrs->quaternion, FusionVectorMultiplyScalar(adjustedHalfGyroscope, deltaTime))); + 8002084: edd7 6a13 vldr s13, [r7, #76] @ 0x4c + 8002088: ed97 7a14 vldr s14, [r7, #80] @ 0x50 + 800208c: edd7 7a15 vldr s15, [r7, #84] @ 0x54 + 8002090: edd7 1a01 vldr s3, [r7, #4] + 8002094: eeb0 0a66 vmov.f32 s0, s13 + 8002098: eef0 0a47 vmov.f32 s1, s14 + 800209c: eeb0 1a67 vmov.f32 s2, s15 + 80020a0: f7ff f842 bl 8001128 + 80020a4: eef0 6a40 vmov.f32 s13, s0 + 80020a8: eeb0 7a60 vmov.f32 s14, s1 + 80020ac: eef0 7a41 vmov.f32 s15, s2 + 80020b0: edc7 6a37 vstr s13, [r7, #220] @ 0xdc + 80020b4: ed87 7a38 vstr s14, [r7, #224] @ 0xe0 + 80020b8: edc7 7a39 vstr s15, [r7, #228] @ 0xe4 + 80020bc: edd7 4a37 vldr s9, [r7, #220] @ 0xdc + 80020c0: ed97 5a38 vldr s10, [r7, #224] @ 0xe0 + 80020c4: edd7 5a39 vldr s11, [r7, #228] @ 0xe4 + 80020c8: 6afb ldr r3, [r7, #44] @ 0x2c + 80020ca: ed93 6a06 vldr s12, [r3, #24] + 80020ce: edd3 6a07 vldr s13, [r3, #28] + 80020d2: ed93 7a08 vldr s14, [r3, #32] + 80020d6: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 80020da: eeb0 2a64 vmov.f32 s4, s9 + 80020de: eef0 2a45 vmov.f32 s5, s10 + 80020e2: eeb0 3a65 vmov.f32 s6, s11 + 80020e6: eeb0 0a46 vmov.f32 s0, s12 + 80020ea: eef0 0a66 vmov.f32 s1, s13 + 80020ee: eeb0 1a47 vmov.f32 s2, s14 + 80020f2: eef0 1a67 vmov.f32 s3, s15 + 80020f6: f7ff fa8e bl 8001616 + 80020fa: eeb0 6a40 vmov.f32 s12, s0 + 80020fe: eef0 6a60 vmov.f32 s13, s1 + 8002102: eeb0 7a41 vmov.f32 s14, s2 + 8002106: eef0 7a61 vmov.f32 s15, s3 + 800210a: ed87 6a3a vstr s12, [r7, #232] @ 0xe8 + 800210e: edc7 6a3b vstr s13, [r7, #236] @ 0xec + 8002112: ed87 7a3c vstr s14, [r7, #240] @ 0xf0 + 8002116: edc7 7a3d vstr s15, [r7, #244] @ 0xf4 + 800211a: 6afc ldr r4, [r7, #44] @ 0x2c + 800211c: ed97 4a3a vldr s8, [r7, #232] @ 0xe8 + 8002120: edd7 4a3b vldr s9, [r7, #236] @ 0xec + 8002124: ed97 5a3c vldr s10, [r7, #240] @ 0xf0 + 8002128: edd7 5a3d vldr s11, [r7, #244] @ 0xf4 + 800212c: 6afb ldr r3, [r7, #44] @ 0x2c + 800212e: ed93 6a06 vldr s12, [r3, #24] + 8002132: edd3 6a07 vldr s13, [r3, #28] + 8002136: ed93 7a08 vldr s14, [r3, #32] + 800213a: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 800213e: eeb0 2a44 vmov.f32 s4, s8 + 8002142: eef0 2a64 vmov.f32 s5, s9 + 8002146: eeb0 3a45 vmov.f32 s6, s10 + 800214a: eef0 3a65 vmov.f32 s7, s11 + 800214e: eeb0 0a46 vmov.f32 s0, s12 + 8002152: eef0 0a66 vmov.f32 s1, s13 + 8002156: eeb0 1a47 vmov.f32 s2, s14 + 800215a: eef0 1a67 vmov.f32 s3, s15 + 800215e: f7ff f9f8 bl 8001552 + 8002162: eeb0 6a40 vmov.f32 s12, s0 + 8002166: eef0 6a60 vmov.f32 s13, s1 + 800216a: eeb0 7a41 vmov.f32 s14, s2 + 800216e: eef0 7a61 vmov.f32 s15, s3 + 8002172: ed84 6a06 vstr s12, [r4, #24] + 8002176: edc4 6a07 vstr s13, [r4, #28] + 800217a: ed84 7a08 vstr s14, [r4, #32] + 800217e: edc4 7a09 vstr s15, [r4, #36] @ 0x24 + + // Normalise quaternion + ahrs->quaternion = FusionQuaternionNormalise(ahrs->quaternion); + 8002182: 6afc ldr r4, [r7, #44] @ 0x2c + 8002184: 6afb ldr r3, [r7, #44] @ 0x2c + 8002186: ed93 6a06 vldr s12, [r3, #24] + 800218a: edd3 6a07 vldr s13, [r3, #28] + 800218e: ed93 7a08 vldr s14, [r3, #32] + 8002192: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 8002196: eeb0 0a46 vmov.f32 s0, s12 + 800219a: eef0 0a66 vmov.f32 s1, s13 + 800219e: eeb0 1a47 vmov.f32 s2, s14 + 80021a2: eef0 1a67 vmov.f32 s3, s15 + 80021a6: f7ff fad6 bl 8001756 + 80021aa: eeb0 6a40 vmov.f32 s12, s0 + 80021ae: eef0 6a60 vmov.f32 s13, s1 + 80021b2: eeb0 7a41 vmov.f32 s14, s2 + 80021b6: eef0 7a61 vmov.f32 s15, s3 + 80021ba: ed84 6a06 vstr s12, [r4, #24] + 80021be: edc4 6a07 vstr s13, [r4, #28] + 80021c2: ed84 7a08 vstr s14, [r4, #32] + 80021c6: edc4 7a09 vstr s15, [r4, #36] @ 0x24 +#undef Q +} + 80021ca: bf00 nop + 80021cc: 37fc adds r7, #252 @ 0xfc + 80021ce: 46bd mov sp, r7 + 80021d0: bd90 pop {r4, r7, pc} + +080021d2 : +/** + * @brief Returns the direction of gravity scaled by 0.5. + * @param ahrs AHRS algorithm structure. + * @return Direction of gravity scaled by 0.5. + */ +static inline FusionVector HalfGravity(const FusionAhrs *const ahrs) { + 80021d2: b480 push {r7} + 80021d4: b093 sub sp, #76 @ 0x4c + 80021d6: af00 add r7, sp, #0 + 80021d8: 6178 str r0, [r7, #20] +#define Q ahrs->quaternion.element + switch (ahrs->settings.convention) { + 80021da: 697b ldr r3, [r7, #20] + 80021dc: 781b ldrb r3, [r3, #0] + 80021de: 2b01 cmp r3, #1 + 80021e0: dc02 bgt.n 80021e8 + 80021e2: 2b00 cmp r3, #0 + 80021e4: da03 bge.n 80021ee + 80021e6: e094 b.n 8002312 + 80021e8: 2b02 cmp r3, #2 + 80021ea: d048 beq.n 800227e + 80021ec: e091 b.n 8002312 + case FusionConventionNwu: + case FusionConventionEnu: { + const FusionVector halfGravity = {.axis = { + .x = Q.x * Q.z - Q.w * Q.y, + 80021ee: 697b ldr r3, [r7, #20] + 80021f0: ed93 7a07 vldr s14, [r3, #28] + 80021f4: 697b ldr r3, [r7, #20] + 80021f6: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 80021fa: ee27 7a27 vmul.f32 s14, s14, s15 + 80021fe: 697b ldr r3, [r7, #20] + 8002200: edd3 6a06 vldr s13, [r3, #24] + 8002204: 697b ldr r3, [r7, #20] + 8002206: edd3 7a08 vldr s15, [r3, #32] + 800220a: ee66 7aa7 vmul.f32 s15, s13, s15 + 800220e: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionVector halfGravity = {.axis = { + 8002212: edc7 7a09 vstr s15, [r7, #36] @ 0x24 + .y = Q.y * Q.z + Q.w * Q.x, + 8002216: 697b ldr r3, [r7, #20] + 8002218: ed93 7a08 vldr s14, [r3, #32] + 800221c: 697b ldr r3, [r7, #20] + 800221e: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 8002222: ee27 7a27 vmul.f32 s14, s14, s15 + 8002226: 697b ldr r3, [r7, #20] + 8002228: edd3 6a06 vldr s13, [r3, #24] + 800222c: 697b ldr r3, [r7, #20] + 800222e: edd3 7a07 vldr s15, [r3, #28] + 8002232: ee66 7aa7 vmul.f32 s15, s13, s15 + 8002236: ee77 7a27 vadd.f32 s15, s14, s15 + const FusionVector halfGravity = {.axis = { + 800223a: edc7 7a0a vstr s15, [r7, #40] @ 0x28 + .z = Q.w * Q.w - 0.5f + Q.z * Q.z, + 800223e: 697b ldr r3, [r7, #20] + 8002240: ed93 7a06 vldr s14, [r3, #24] + 8002244: 697b ldr r3, [r7, #20] + 8002246: edd3 7a06 vldr s15, [r3, #24] + 800224a: ee67 7a27 vmul.f32 s15, s14, s15 + 800224e: eeb6 7a00 vmov.f32 s14, #96 @ 0x3f000000 0.5 + 8002252: ee37 7ac7 vsub.f32 s14, s15, s14 + 8002256: 697b ldr r3, [r7, #20] + 8002258: edd3 6a09 vldr s13, [r3, #36] @ 0x24 + 800225c: 697b ldr r3, [r7, #20] + 800225e: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 8002262: ee66 7aa7 vmul.f32 s15, s13, s15 + 8002266: ee77 7a27 vadd.f32 s15, s14, s15 + const FusionVector halfGravity = {.axis = { + 800226a: edc7 7a0b vstr s15, [r7, #44] @ 0x2c + }}; // third column of transposed rotation matrix scaled by 0.5 + return halfGravity; + 800226e: f107 033c add.w r3, r7, #60 @ 0x3c + 8002272: f107 0224 add.w r2, r7, #36 @ 0x24 + 8002276: ca07 ldmia r2, {r0, r1, r2} + 8002278: e883 0007 stmia.w r3, {r0, r1, r2} + 800227c: e052 b.n 8002324 + } + case FusionConventionNed: { + const FusionVector halfGravity = {.axis = { + .x = Q.w * Q.y - Q.x * Q.z, + 800227e: 697b ldr r3, [r7, #20] + 8002280: ed93 7a06 vldr s14, [r3, #24] + 8002284: 697b ldr r3, [r7, #20] + 8002286: edd3 7a08 vldr s15, [r3, #32] + 800228a: ee27 7a27 vmul.f32 s14, s14, s15 + 800228e: 697b ldr r3, [r7, #20] + 8002290: edd3 6a07 vldr s13, [r3, #28] + 8002294: 697b ldr r3, [r7, #20] + 8002296: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 800229a: ee66 7aa7 vmul.f32 s15, s13, s15 + 800229e: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionVector halfGravity = {.axis = { + 80022a2: edc7 7a06 vstr s15, [r7, #24] + .y = -1.0f * (Q.y * Q.z + Q.w * Q.x), + 80022a6: 697b ldr r3, [r7, #20] + 80022a8: ed93 7a08 vldr s14, [r3, #32] + 80022ac: 697b ldr r3, [r7, #20] + 80022ae: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 80022b2: ee27 7a27 vmul.f32 s14, s14, s15 + 80022b6: 697b ldr r3, [r7, #20] + 80022b8: edd3 6a06 vldr s13, [r3, #24] + 80022bc: 697b ldr r3, [r7, #20] + 80022be: edd3 7a07 vldr s15, [r3, #28] + 80022c2: ee66 7aa7 vmul.f32 s15, s13, s15 + 80022c6: ee77 7a27 vadd.f32 s15, s14, s15 + 80022ca: eef1 7a67 vneg.f32 s15, s15 + const FusionVector halfGravity = {.axis = { + 80022ce: edc7 7a07 vstr s15, [r7, #28] + .z = 0.5f - Q.w * Q.w - Q.z * Q.z, + 80022d2: 697b ldr r3, [r7, #20] + 80022d4: ed93 7a06 vldr s14, [r3, #24] + 80022d8: 697b ldr r3, [r7, #20] + 80022da: edd3 7a06 vldr s15, [r3, #24] + 80022de: ee67 7a27 vmul.f32 s15, s14, s15 + 80022e2: eeb6 7a00 vmov.f32 s14, #96 @ 0x3f000000 0.5 + 80022e6: ee37 7a67 vsub.f32 s14, s14, s15 + 80022ea: 697b ldr r3, [r7, #20] + 80022ec: edd3 6a09 vldr s13, [r3, #36] @ 0x24 + 80022f0: 697b ldr r3, [r7, #20] + 80022f2: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 80022f6: ee66 7aa7 vmul.f32 s15, s13, s15 + 80022fa: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionVector halfGravity = {.axis = { + 80022fe: edc7 7a08 vstr s15, [r7, #32] + }}; // third column of transposed rotation matrix scaled by -0.5 + return halfGravity; + 8002302: f107 033c add.w r3, r7, #60 @ 0x3c + 8002306: f107 0218 add.w r2, r7, #24 + 800230a: ca07 ldmia r2, {r0, r1, r2} + 800230c: e883 0007 stmia.w r3, {r0, r1, r2} + 8002310: e008 b.n 8002324 + } + } + return FUSION_VECTOR_ZERO; // avoid compiler warning + 8002312: f04f 0300 mov.w r3, #0 + 8002316: 63fb str r3, [r7, #60] @ 0x3c + 8002318: f04f 0300 mov.w r3, #0 + 800231c: 643b str r3, [r7, #64] @ 0x40 + 800231e: f04f 0300 mov.w r3, #0 + 8002322: 647b str r3, [r7, #68] @ 0x44 +#undef Q +} + 8002324: 6bf9 ldr r1, [r7, #60] @ 0x3c + 8002326: 6c3a ldr r2, [r7, #64] @ 0x40 + 8002328: 6c7b ldr r3, [r7, #68] @ 0x44 + 800232a: ee06 1a90 vmov s13, r1 + 800232e: ee07 2a10 vmov s14, r2 + 8002332: ee07 3a90 vmov s15, r3 + 8002336: eeb0 0a66 vmov.f32 s0, s13 + 800233a: eef0 0a47 vmov.f32 s1, s14 + 800233e: eeb0 1a67 vmov.f32 s2, s15 + 8002342: 374c adds r7, #76 @ 0x4c + 8002344: 46bd mov sp, r7 + 8002346: f85d 7b04 ldr.w r7, [sp], #4 + 800234a: 4770 bx lr + +0800234c : +/** + * @brief Returns the direction of the magnetic field scaled by 0.5. + * @param ahrs AHRS algorithm structure. + * @return Direction of the magnetic field scaled by 0.5. + */ +static inline FusionVector HalfMagnetic(const FusionAhrs *const ahrs) { + 800234c: b480 push {r7} + 800234e: b097 sub sp, #92 @ 0x5c + 8002350: af00 add r7, sp, #0 + 8002352: 6178 str r0, [r7, #20] +#define Q ahrs->quaternion.element + switch (ahrs->settings.convention) { + 8002354: 697b ldr r3, [r7, #20] + 8002356: 781b ldrb r3, [r3, #0] + 8002358: 2b02 cmp r3, #2 + 800235a: f000 809a beq.w 8002492 + 800235e: 2b02 cmp r3, #2 + 8002360: f300 80e1 bgt.w 8002526 + 8002364: 2b00 cmp r3, #0 + 8002366: d002 beq.n 800236e + 8002368: 2b01 cmp r3, #1 + 800236a: d048 beq.n 80023fe + 800236c: e0db b.n 8002526 + case FusionConventionNwu: { + const FusionVector halfMagnetic = {.axis = { + .x = Q.x * Q.y + Q.w * Q.z, + 800236e: 697b ldr r3, [r7, #20] + 8002370: ed93 7a07 vldr s14, [r3, #28] + 8002374: 697b ldr r3, [r7, #20] + 8002376: edd3 7a08 vldr s15, [r3, #32] + 800237a: ee27 7a27 vmul.f32 s14, s14, s15 + 800237e: 697b ldr r3, [r7, #20] + 8002380: edd3 6a06 vldr s13, [r3, #24] + 8002384: 697b ldr r3, [r7, #20] + 8002386: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 800238a: ee66 7aa7 vmul.f32 s15, s13, s15 + 800238e: ee77 7a27 vadd.f32 s15, s14, s15 + const FusionVector halfMagnetic = {.axis = { + 8002392: edc7 7a0d vstr s15, [r7, #52] @ 0x34 + .y = Q.w * Q.w - 0.5f + Q.y * Q.y, + 8002396: 697b ldr r3, [r7, #20] + 8002398: ed93 7a06 vldr s14, [r3, #24] + 800239c: 697b ldr r3, [r7, #20] + 800239e: edd3 7a06 vldr s15, [r3, #24] + 80023a2: ee67 7a27 vmul.f32 s15, s14, s15 + 80023a6: eeb6 7a00 vmov.f32 s14, #96 @ 0x3f000000 0.5 + 80023aa: ee37 7ac7 vsub.f32 s14, s15, s14 + 80023ae: 697b ldr r3, [r7, #20] + 80023b0: edd3 6a08 vldr s13, [r3, #32] + 80023b4: 697b ldr r3, [r7, #20] + 80023b6: edd3 7a08 vldr s15, [r3, #32] + 80023ba: ee66 7aa7 vmul.f32 s15, s13, s15 + 80023be: ee77 7a27 vadd.f32 s15, s14, s15 + const FusionVector halfMagnetic = {.axis = { + 80023c2: edc7 7a0e vstr s15, [r7, #56] @ 0x38 + .z = Q.y * Q.z - Q.w * Q.x, + 80023c6: 697b ldr r3, [r7, #20] + 80023c8: ed93 7a08 vldr s14, [r3, #32] + 80023cc: 697b ldr r3, [r7, #20] + 80023ce: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 80023d2: ee27 7a27 vmul.f32 s14, s14, s15 + 80023d6: 697b ldr r3, [r7, #20] + 80023d8: edd3 6a06 vldr s13, [r3, #24] + 80023dc: 697b ldr r3, [r7, #20] + 80023de: edd3 7a07 vldr s15, [r3, #28] + 80023e2: ee66 7aa7 vmul.f32 s15, s13, s15 + 80023e6: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionVector halfMagnetic = {.axis = { + 80023ea: edc7 7a0f vstr s15, [r7, #60] @ 0x3c + }}; // second column of transposed rotation matrix scaled by 0.5 + return halfMagnetic; + 80023ee: f107 034c add.w r3, r7, #76 @ 0x4c + 80023f2: f107 0234 add.w r2, r7, #52 @ 0x34 + 80023f6: ca07 ldmia r2, {r0, r1, r2} + 80023f8: e883 0007 stmia.w r3, {r0, r1, r2} + 80023fc: e09c b.n 8002538 + } + case FusionConventionEnu: { + const FusionVector halfMagnetic = {.axis = { + .x = 0.5f - Q.w * Q.w - Q.x * Q.x, + 80023fe: 697b ldr r3, [r7, #20] + 8002400: ed93 7a06 vldr s14, [r3, #24] + 8002404: 697b ldr r3, [r7, #20] + 8002406: edd3 7a06 vldr s15, [r3, #24] + 800240a: ee67 7a27 vmul.f32 s15, s14, s15 + 800240e: eeb6 7a00 vmov.f32 s14, #96 @ 0x3f000000 0.5 + 8002412: ee37 7a67 vsub.f32 s14, s14, s15 + 8002416: 697b ldr r3, [r7, #20] + 8002418: edd3 6a07 vldr s13, [r3, #28] + 800241c: 697b ldr r3, [r7, #20] + 800241e: edd3 7a07 vldr s15, [r3, #28] + 8002422: ee66 7aa7 vmul.f32 s15, s13, s15 + 8002426: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionVector halfMagnetic = {.axis = { + 800242a: edc7 7a0a vstr s15, [r7, #40] @ 0x28 + .y = Q.w * Q.z - Q.x * Q.y, + 800242e: 697b ldr r3, [r7, #20] + 8002430: ed93 7a06 vldr s14, [r3, #24] + 8002434: 697b ldr r3, [r7, #20] + 8002436: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 800243a: ee27 7a27 vmul.f32 s14, s14, s15 + 800243e: 697b ldr r3, [r7, #20] + 8002440: edd3 6a07 vldr s13, [r3, #28] + 8002444: 697b ldr r3, [r7, #20] + 8002446: edd3 7a08 vldr s15, [r3, #32] + 800244a: ee66 7aa7 vmul.f32 s15, s13, s15 + 800244e: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionVector halfMagnetic = {.axis = { + 8002452: edc7 7a0b vstr s15, [r7, #44] @ 0x2c + .z = -1.0f * (Q.x * Q.z + Q.w * Q.y), + 8002456: 697b ldr r3, [r7, #20] + 8002458: ed93 7a07 vldr s14, [r3, #28] + 800245c: 697b ldr r3, [r7, #20] + 800245e: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 8002462: ee27 7a27 vmul.f32 s14, s14, s15 + 8002466: 697b ldr r3, [r7, #20] + 8002468: edd3 6a06 vldr s13, [r3, #24] + 800246c: 697b ldr r3, [r7, #20] + 800246e: edd3 7a08 vldr s15, [r3, #32] + 8002472: ee66 7aa7 vmul.f32 s15, s13, s15 + 8002476: ee77 7a27 vadd.f32 s15, s14, s15 + 800247a: eef1 7a67 vneg.f32 s15, s15 + const FusionVector halfMagnetic = {.axis = { + 800247e: edc7 7a0c vstr s15, [r7, #48] @ 0x30 + }}; // first column of transposed rotation matrix scaled by -0.5 + return halfMagnetic; + 8002482: f107 034c add.w r3, r7, #76 @ 0x4c + 8002486: f107 0228 add.w r2, r7, #40 @ 0x28 + 800248a: ca07 ldmia r2, {r0, r1, r2} + 800248c: e883 0007 stmia.w r3, {r0, r1, r2} + 8002490: e052 b.n 8002538 + } + case FusionConventionNed: { + const FusionVector halfMagnetic = {.axis = { + .x = -1.0f * (Q.x * Q.y + Q.w * Q.z), + 8002492: 697b ldr r3, [r7, #20] + 8002494: ed93 7a07 vldr s14, [r3, #28] + 8002498: 697b ldr r3, [r7, #20] + 800249a: edd3 7a08 vldr s15, [r3, #32] + 800249e: ee27 7a27 vmul.f32 s14, s14, s15 + 80024a2: 697b ldr r3, [r7, #20] + 80024a4: edd3 6a06 vldr s13, [r3, #24] + 80024a8: 697b ldr r3, [r7, #20] + 80024aa: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 80024ae: ee66 7aa7 vmul.f32 s15, s13, s15 + 80024b2: ee77 7a27 vadd.f32 s15, s14, s15 + 80024b6: eef1 7a67 vneg.f32 s15, s15 + const FusionVector halfMagnetic = {.axis = { + 80024ba: edc7 7a07 vstr s15, [r7, #28] + .y = 0.5f - Q.w * Q.w - Q.y * Q.y, + 80024be: 697b ldr r3, [r7, #20] + 80024c0: ed93 7a06 vldr s14, [r3, #24] + 80024c4: 697b ldr r3, [r7, #20] + 80024c6: edd3 7a06 vldr s15, [r3, #24] + 80024ca: ee67 7a27 vmul.f32 s15, s14, s15 + 80024ce: eeb6 7a00 vmov.f32 s14, #96 @ 0x3f000000 0.5 + 80024d2: ee37 7a67 vsub.f32 s14, s14, s15 + 80024d6: 697b ldr r3, [r7, #20] + 80024d8: edd3 6a08 vldr s13, [r3, #32] + 80024dc: 697b ldr r3, [r7, #20] + 80024de: edd3 7a08 vldr s15, [r3, #32] + 80024e2: ee66 7aa7 vmul.f32 s15, s13, s15 + 80024e6: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionVector halfMagnetic = {.axis = { + 80024ea: edc7 7a08 vstr s15, [r7, #32] + .z = Q.w * Q.x - Q.y * Q.z, + 80024ee: 697b ldr r3, [r7, #20] + 80024f0: ed93 7a06 vldr s14, [r3, #24] + 80024f4: 697b ldr r3, [r7, #20] + 80024f6: edd3 7a07 vldr s15, [r3, #28] + 80024fa: ee27 7a27 vmul.f32 s14, s14, s15 + 80024fe: 697b ldr r3, [r7, #20] + 8002500: edd3 6a08 vldr s13, [r3, #32] + 8002504: 697b ldr r3, [r7, #20] + 8002506: edd3 7a09 vldr s15, [r3, #36] @ 0x24 + 800250a: ee66 7aa7 vmul.f32 s15, s13, s15 + 800250e: ee77 7a67 vsub.f32 s15, s14, s15 + const FusionVector halfMagnetic = {.axis = { + 8002512: edc7 7a09 vstr s15, [r7, #36] @ 0x24 + }}; // second column of transposed rotation matrix scaled by -0.5 + return halfMagnetic; + 8002516: f107 034c add.w r3, r7, #76 @ 0x4c + 800251a: f107 021c add.w r2, r7, #28 + 800251e: ca07 ldmia r2, {r0, r1, r2} + 8002520: e883 0007 stmia.w r3, {r0, r1, r2} + 8002524: e008 b.n 8002538 + } + } + return FUSION_VECTOR_ZERO; // avoid compiler warning + 8002526: f04f 0300 mov.w r3, #0 + 800252a: 64fb str r3, [r7, #76] @ 0x4c + 800252c: f04f 0300 mov.w r3, #0 + 8002530: 653b str r3, [r7, #80] @ 0x50 + 8002532: f04f 0300 mov.w r3, #0 + 8002536: 657b str r3, [r7, #84] @ 0x54 +#undef Q +} + 8002538: 6cf9 ldr r1, [r7, #76] @ 0x4c + 800253a: 6d3a ldr r2, [r7, #80] @ 0x50 + 800253c: 6d7b ldr r3, [r7, #84] @ 0x54 + 800253e: ee06 1a90 vmov s13, r1 + 8002542: ee07 2a10 vmov s14, r2 + 8002546: ee07 3a90 vmov s15, r3 + 800254a: eeb0 0a66 vmov.f32 s0, s13 + 800254e: eef0 0a47 vmov.f32 s1, s14 + 8002552: eeb0 1a67 vmov.f32 s2, s15 + 8002556: 375c adds r7, #92 @ 0x5c + 8002558: 46bd mov sp, r7 + 800255a: f85d 7b04 ldr.w r7, [sp], #4 + 800255e: 4770 bx lr + +08002560 : + * @brief Returns the feedback. + * @param sensor Sensor. + * @param reference Reference. + * @return Feedback. + */ +static inline FusionVector Feedback(const FusionVector sensor, const FusionVector reference) { + 8002560: b580 push {r7, lr} + 8002562: b090 sub sp, #64 @ 0x40 + 8002564: af00 add r7, sp, #0 + 8002566: eeb0 5a40 vmov.f32 s10, s0 + 800256a: eef0 5a60 vmov.f32 s11, s1 + 800256e: eeb0 6a41 vmov.f32 s12, s2 + 8002572: eef0 6a61 vmov.f32 s13, s3 + 8002576: eeb0 7a42 vmov.f32 s14, s4 + 800257a: eef0 7a62 vmov.f32 s15, s5 + 800257e: ed87 5a07 vstr s10, [r7, #28] + 8002582: edc7 5a08 vstr s11, [r7, #32] + 8002586: ed87 6a09 vstr s12, [r7, #36] @ 0x24 + 800258a: edc7 6a04 vstr s13, [r7, #16] + 800258e: ed87 7a05 vstr s14, [r7, #20] + 8002592: edc7 7a06 vstr s15, [r7, #24] + if (FusionVectorDotProduct(sensor, reference) < 0.0f) { // if error is >90 degrees + 8002596: ed97 5a04 vldr s10, [r7, #16] + 800259a: edd7 5a05 vldr s11, [r7, #20] + 800259e: ed97 6a06 vldr s12, [r7, #24] + 80025a2: edd7 6a07 vldr s13, [r7, #28] + 80025a6: ed97 7a08 vldr s14, [r7, #32] + 80025aa: edd7 7a09 vldr s15, [r7, #36] @ 0x24 + 80025ae: eef0 1a45 vmov.f32 s3, s10 + 80025b2: eeb0 2a65 vmov.f32 s4, s11 + 80025b6: eef0 2a46 vmov.f32 s5, s12 + 80025ba: eeb0 0a66 vmov.f32 s0, s13 + 80025be: eef0 0a47 vmov.f32 s1, s14 + 80025c2: eeb0 1a67 vmov.f32 s2, s15 + 80025c6: f7fe fea7 bl 8001318 + 80025ca: eef0 7a40 vmov.f32 s15, s0 + 80025ce: eef5 7ac0 vcmpe.f32 s15, #0.0 + 80025d2: eef1 fa10 vmrs APSR_nzcv, fpscr + 80025d6: d540 bpl.n 800265a + return FusionVectorNormalise(FusionVectorCrossProduct(sensor, reference)); + 80025d8: ed97 5a04 vldr s10, [r7, #16] + 80025dc: edd7 5a05 vldr s11, [r7, #20] + 80025e0: ed97 6a06 vldr s12, [r7, #24] + 80025e4: edd7 6a07 vldr s13, [r7, #28] + 80025e8: ed97 7a08 vldr s14, [r7, #32] + 80025ec: edd7 7a09 vldr s15, [r7, #36] @ 0x24 + 80025f0: eef0 1a45 vmov.f32 s3, s10 + 80025f4: eeb0 2a65 vmov.f32 s4, s11 + 80025f8: eef0 2a46 vmov.f32 s5, s12 + 80025fc: eeb0 0a66 vmov.f32 s0, s13 + 8002600: eef0 0a47 vmov.f32 s1, s14 + 8002604: eeb0 1a67 vmov.f32 s2, s15 + 8002608: f7fe fe20 bl 800124c + 800260c: eef0 6a40 vmov.f32 s13, s0 + 8002610: eeb0 7a60 vmov.f32 s14, s1 + 8002614: eef0 7a41 vmov.f32 s15, s2 + 8002618: edc7 6a0d vstr s13, [r7, #52] @ 0x34 + 800261c: ed87 7a0e vstr s14, [r7, #56] @ 0x38 + 8002620: edc7 7a0f vstr s15, [r7, #60] @ 0x3c + 8002624: edd7 6a0d vldr s13, [r7, #52] @ 0x34 + 8002628: ed97 7a0e vldr s14, [r7, #56] @ 0x38 + 800262c: edd7 7a0f vldr s15, [r7, #60] @ 0x3c + 8002630: eeb0 0a66 vmov.f32 s0, s13 + 8002634: eef0 0a47 vmov.f32 s1, s14 + 8002638: eeb0 1a67 vmov.f32 s2, s15 + 800263c: f7fe ff36 bl 80014ac + 8002640: eef0 6a40 vmov.f32 s13, s0 + 8002644: eeb0 7a60 vmov.f32 s14, s1 + 8002648: eef0 7a41 vmov.f32 s15, s2 + 800264c: edc7 6a0a vstr s13, [r7, #40] @ 0x28 + 8002650: ed87 7a0b vstr s14, [r7, #44] @ 0x2c + 8002654: edc7 7a0c vstr s15, [r7, #48] @ 0x30 + 8002658: e025 b.n 80026a6 + } + return FusionVectorCrossProduct(sensor, reference); + 800265a: ed97 5a04 vldr s10, [r7, #16] + 800265e: edd7 5a05 vldr s11, [r7, #20] + 8002662: ed97 6a06 vldr s12, [r7, #24] + 8002666: edd7 6a07 vldr s13, [r7, #28] + 800266a: ed97 7a08 vldr s14, [r7, #32] + 800266e: edd7 7a09 vldr s15, [r7, #36] @ 0x24 + 8002672: eef0 1a45 vmov.f32 s3, s10 + 8002676: eeb0 2a65 vmov.f32 s4, s11 + 800267a: eef0 2a46 vmov.f32 s5, s12 + 800267e: eeb0 0a66 vmov.f32 s0, s13 + 8002682: eef0 0a47 vmov.f32 s1, s14 + 8002686: eeb0 1a67 vmov.f32 s2, s15 + 800268a: f7fe fddf bl 800124c + 800268e: eef0 6a40 vmov.f32 s13, s0 + 8002692: eeb0 7a60 vmov.f32 s14, s1 + 8002696: eef0 7a41 vmov.f32 s15, s2 + 800269a: edc7 6a0a vstr s13, [r7, #40] @ 0x28 + 800269e: ed87 7a0b vstr s14, [r7, #44] @ 0x2c + 80026a2: edc7 7a0c vstr s15, [r7, #48] @ 0x30 +} + 80026a6: 6ab9 ldr r1, [r7, #40] @ 0x28 + 80026a8: 6afa ldr r2, [r7, #44] @ 0x2c + 80026aa: 6b3b ldr r3, [r7, #48] @ 0x30 + 80026ac: ee06 1a90 vmov s13, r1 + 80026b0: ee07 2a10 vmov s14, r2 + 80026b4: ee07 3a90 vmov s15, r3 + 80026b8: eeb0 0a66 vmov.f32 s0, s13 + 80026bc: eef0 0a47 vmov.f32 s1, s14 + 80026c0: eeb0 1a67 vmov.f32 s2, s15 + 80026c4: 3740 adds r7, #64 @ 0x40 + 80026c6: 46bd mov sp, r7 + 80026c8: bd80 pop {r7, pc} + +080026ca : + * @param value Value. + * @param min Minimum value. + * @param max Maximum value. + * @return Value limited to maximum and minimum. + */ +static inline int Clamp(const int value, const int min, const int max) { + 80026ca: b480 push {r7} + 80026cc: b085 sub sp, #20 + 80026ce: af00 add r7, sp, #0 + 80026d0: 60f8 str r0, [r7, #12] + 80026d2: 60b9 str r1, [r7, #8] + 80026d4: 607a str r2, [r7, #4] + if (value < min) { + 80026d6: 68fa ldr r2, [r7, #12] + 80026d8: 68bb ldr r3, [r7, #8] + 80026da: 429a cmp r2, r3 + 80026dc: da01 bge.n 80026e2 + return min; + 80026de: 68bb ldr r3, [r7, #8] + 80026e0: e006 b.n 80026f0 + } + if (value > max) { + 80026e2: 68fa ldr r2, [r7, #12] + 80026e4: 687b ldr r3, [r7, #4] + 80026e6: 429a cmp r2, r3 + 80026e8: dd01 ble.n 80026ee + return max; + 80026ea: 687b ldr r3, [r7, #4] + 80026ec: e000 b.n 80026f0 + } + return value; + 80026ee: 68fb ldr r3, [r7, #12] +} + 80026f0: 4618 mov r0, r3 + 80026f2: 3714 adds r7, #20 + 80026f4: 46bd mov sp, r7 + 80026f6: f85d 7b04 ldr.w r7, [sp], #4 + 80026fa: 4770 bx lr + +080026fc : +/** + * @brief Returns the quaternion describing the sensor relative to the Earth. + * @param ahrs AHRS algorithm structure. + * @return Quaternion describing the sensor relative to the Earth. + */ +FusionQuaternion FusionAhrsGetQuaternion(const FusionAhrs *const ahrs) { + 80026fc: b490 push {r4, r7} + 80026fe: b08a sub sp, #40 @ 0x28 + 8002700: af00 add r7, sp, #0 + 8002702: 6178 str r0, [r7, #20] + return ahrs->quaternion; + 8002704: 697b ldr r3, [r7, #20] + 8002706: f107 0418 add.w r4, r7, #24 + 800270a: 3318 adds r3, #24 + 800270c: cb0f ldmia r3, {r0, r1, r2, r3} + 800270e: e884 000f stmia.w r4, {r0, r1, r2, r3} + 8002712: 69b8 ldr r0, [r7, #24] + 8002714: 69f9 ldr r1, [r7, #28] + 8002716: 6a3a ldr r2, [r7, #32] + 8002718: 6a7b ldr r3, [r7, #36] @ 0x24 + 800271a: ee06 0a10 vmov s12, r0 + 800271e: ee06 1a90 vmov s13, r1 + 8002722: ee07 2a10 vmov s14, r2 + 8002726: ee07 3a90 vmov s15, r3 +} + 800272a: eeb0 0a46 vmov.f32 s0, s12 + 800272e: eef0 0a66 vmov.f32 s1, s13 + 8002732: eeb0 1a47 vmov.f32 s2, s14 + 8002736: eef0 1a67 vmov.f32 s3, s15 + 800273a: 3728 adds r7, #40 @ 0x28 + 800273c: 46bd mov sp, r7 + 800273e: bc90 pop {r4, r7} + 8002740: 4770 bx lr + ... + +08002744 : +/** + * @brief Returns the AHRS algorithm internal states. + * @param ahrs AHRS algorithm structure. + * @return AHRS algorithm internal states. + */ +FusionAhrsInternalStates FusionAhrsGetInternalStates(const FusionAhrs *const ahrs) { + 8002744: b5b0 push {r4, r5, r7, lr} + 8002746: b088 sub sp, #32 + 8002748: af00 add r7, sp, #0 + 800274a: 6078 str r0, [r7, #4] + 800274c: 6039 str r1, [r7, #0] + const FusionAhrsInternalStates internalStates = { + .accelerationError = FusionRadiansToDegrees(FusionAsin(2.0f * FusionVectorMagnitude(ahrs->halfAccelerometerFeedback))), + 800274e: 683b ldr r3, [r7, #0] + 8002750: edd3 6a11 vldr s13, [r3, #68] @ 0x44 + 8002754: ed93 7a12 vldr s14, [r3, #72] @ 0x48 + 8002758: edd3 7a13 vldr s15, [r3, #76] @ 0x4c + 800275c: eeb0 0a66 vmov.f32 s0, s13 + 8002760: eef0 0a47 vmov.f32 s1, s14 + 8002764: eeb0 1a67 vmov.f32 s2, s15 + 8002768: f7fe fe76 bl 8001458 + 800276c: eef0 7a40 vmov.f32 s15, s0 + 8002770: ee77 7aa7 vadd.f32 s15, s15, s15 + 8002774: eeb0 0a67 vmov.f32 s0, s15 + 8002778: f7fe fbdc bl 8000f34 + 800277c: eef0 7a40 vmov.f32 s15, s0 + 8002780: eeb0 0a67 vmov.f32 s0, s15 + 8002784: f7fe fbc2 bl 8000f0c + 8002788: eef0 7a40 vmov.f32 s15, s0 + const FusionAhrsInternalStates internalStates = { + 800278c: edc7 7a02 vstr s15, [r7, #8] + .accelerometerIgnored = ahrs->accelerometerIgnored, + 8002790: 683b ldr r3, [r7, #0] + 8002792: f893 305c ldrb.w r3, [r3, #92] @ 0x5c + const FusionAhrsInternalStates internalStates = { + 8002796: 733b strb r3, [r7, #12] + .accelerationRecoveryTrigger = ahrs->settings.recoveryTriggerPeriod == 0 ? 0.0f : (float) ahrs->accelerationRecoveryTrigger / (float) ahrs->settings.recoveryTriggerPeriod, + 8002798: 683b ldr r3, [r7, #0] + 800279a: 695b ldr r3, [r3, #20] + 800279c: 2b00 cmp r3, #0 + 800279e: d00e beq.n 80027be + 80027a0: 683b ldr r3, [r7, #0] + 80027a2: 6e1b ldr r3, [r3, #96] @ 0x60 + 80027a4: ee07 3a90 vmov s15, r3 + 80027a8: eef8 6ae7 vcvt.f32.s32 s13, s15 + 80027ac: 683b ldr r3, [r7, #0] + 80027ae: 695b ldr r3, [r3, #20] + 80027b0: ee07 3a90 vmov s15, r3 + 80027b4: eeb8 7a67 vcvt.f32.u32 s14, s15 + 80027b8: eec6 7a87 vdiv.f32 s15, s13, s14 + 80027bc: e001 b.n 80027c2 + 80027be: eddf 7a27 vldr s15, [pc, #156] @ 800285c + const FusionAhrsInternalStates internalStates = { + 80027c2: edc7 7a04 vstr s15, [r7, #16] + .magneticError = FusionRadiansToDegrees(FusionAsin(2.0f * FusionVectorMagnitude(ahrs->halfMagnetometerFeedback))), + 80027c6: 683b ldr r3, [r7, #0] + 80027c8: edd3 6a14 vldr s13, [r3, #80] @ 0x50 + 80027cc: ed93 7a15 vldr s14, [r3, #84] @ 0x54 + 80027d0: edd3 7a16 vldr s15, [r3, #88] @ 0x58 + 80027d4: eeb0 0a66 vmov.f32 s0, s13 + 80027d8: eef0 0a47 vmov.f32 s1, s14 + 80027dc: eeb0 1a67 vmov.f32 s2, s15 + 80027e0: f7fe fe3a bl 8001458 + 80027e4: eef0 7a40 vmov.f32 s15, s0 + 80027e8: ee77 7aa7 vadd.f32 s15, s15, s15 + 80027ec: eeb0 0a67 vmov.f32 s0, s15 + 80027f0: f7fe fba0 bl 8000f34 + 80027f4: eef0 7a40 vmov.f32 s15, s0 + 80027f8: eeb0 0a67 vmov.f32 s0, s15 + 80027fc: f7fe fb86 bl 8000f0c + 8002800: eef0 7a40 vmov.f32 s15, s0 + const FusionAhrsInternalStates internalStates = { + 8002804: edc7 7a05 vstr s15, [r7, #20] + .magnetometerIgnored = ahrs->magnetometerIgnored, + 8002808: 683b ldr r3, [r7, #0] + 800280a: f893 3068 ldrb.w r3, [r3, #104] @ 0x68 + const FusionAhrsInternalStates internalStates = { + 800280e: 763b strb r3, [r7, #24] + .magneticRecoveryTrigger = ahrs->settings.recoveryTriggerPeriod == 0 ? 0.0f : (float) ahrs->magneticRecoveryTrigger / (float) ahrs->settings.recoveryTriggerPeriod, + 8002810: 683b ldr r3, [r7, #0] + 8002812: 695b ldr r3, [r3, #20] + 8002814: 2b00 cmp r3, #0 + 8002816: d00e beq.n 8002836 + 8002818: 683b ldr r3, [r7, #0] + 800281a: 6edb ldr r3, [r3, #108] @ 0x6c + 800281c: ee07 3a90 vmov s15, r3 + 8002820: eef8 6ae7 vcvt.f32.s32 s13, s15 + 8002824: 683b ldr r3, [r7, #0] + 8002826: 695b ldr r3, [r3, #20] + 8002828: ee07 3a90 vmov s15, r3 + 800282c: eeb8 7a67 vcvt.f32.u32 s14, s15 + 8002830: eec6 7a87 vdiv.f32 s15, s13, s14 + 8002834: e001 b.n 800283a + 8002836: eddf 7a09 vldr s15, [pc, #36] @ 800285c + const FusionAhrsInternalStates internalStates = { + 800283a: edc7 7a07 vstr s15, [r7, #28] + }; + return internalStates; + 800283e: 687b ldr r3, [r7, #4] + 8002840: 461d mov r5, r3 + 8002842: f107 0408 add.w r4, r7, #8 + 8002846: cc0f ldmia r4!, {r0, r1, r2, r3} + 8002848: c50f stmia r5!, {r0, r1, r2, r3} + 800284a: e894 0003 ldmia.w r4, {r0, r1} + 800284e: e885 0003 stmia.w r5, {r0, r1} +} + 8002852: 6878 ldr r0, [r7, #4] + 8002854: 3720 adds r7, #32 + 8002856: 46bd mov sp, r7 + 8002858: bdb0 pop {r4, r5, r7, pc} + 800285a: bf00 nop + 800285c: 00000000 .word 0x00000000 + +08002860 : +/** + * @brief Returns the AHRS algorithm flags. + * @param ahrs AHRS algorithm structure. + * @return AHRS algorithm flags. + */ +FusionAhrsFlags FusionAhrsGetFlags(const FusionAhrs *const ahrs) { + 8002860: b480 push {r7} + 8002862: b085 sub sp, #20 + 8002864: af00 add r7, sp, #0 + 8002866: 6078 str r0, [r7, #4] + const FusionAhrsFlags flags = { + .initialising = ahrs->initialising, + 8002868: 687b ldr r3, [r7, #4] + 800286a: f893 3034 ldrb.w r3, [r3, #52] @ 0x34 + const FusionAhrsFlags flags = { + 800286e: 723b strb r3, [r7, #8] + .angularRateRecovery = ahrs->angularRateRecovery, + 8002870: 687b ldr r3, [r7, #4] + 8002872: f893 3040 ldrb.w r3, [r3, #64] @ 0x40 + const FusionAhrsFlags flags = { + 8002876: 727b strb r3, [r7, #9] + .accelerationRecovery = ahrs->accelerationRecoveryTrigger > ahrs->accelerationRecoveryTimeout, + 8002878: 687b ldr r3, [r7, #4] + 800287a: 6e1a ldr r2, [r3, #96] @ 0x60 + 800287c: 687b ldr r3, [r7, #4] + 800287e: 6e5b ldr r3, [r3, #100] @ 0x64 + 8002880: 429a cmp r2, r3 + 8002882: bfcc ite gt + 8002884: 2301 movgt r3, #1 + 8002886: 2300 movle r3, #0 + 8002888: b2db uxtb r3, r3 + const FusionAhrsFlags flags = { + 800288a: 72bb strb r3, [r7, #10] + .magneticRecovery= ahrs->magneticRecoveryTrigger > ahrs->magneticRecoveryTimeout, + 800288c: 687b ldr r3, [r7, #4] + 800288e: 6eda ldr r2, [r3, #108] @ 0x6c + 8002890: 687b ldr r3, [r7, #4] + 8002892: 6f1b ldr r3, [r3, #112] @ 0x70 + 8002894: 429a cmp r2, r3 + 8002896: bfcc ite gt + 8002898: 2301 movgt r3, #1 + 800289a: 2300 movle r3, #0 + 800289c: b2db uxtb r3, r3 + const FusionAhrsFlags flags = { + 800289e: 72fb strb r3, [r7, #11] + }; + return flags; + 80028a0: 68bb ldr r3, [r7, #8] + 80028a2: 60fb str r3, [r7, #12] + 80028a4: 2300 movs r3, #0 + 80028a6: 7b3a ldrb r2, [r7, #12] + 80028a8: f362 0307 bfi r3, r2, #0, #8 + 80028ac: 7b7a ldrb r2, [r7, #13] + 80028ae: f362 230f bfi r3, r2, #8, #8 + 80028b2: 7bba ldrb r2, [r7, #14] + 80028b4: f362 4317 bfi r3, r2, #16, #8 + 80028b8: 7bfa ldrb r2, [r7, #15] + 80028ba: f362 631f bfi r3, r2, #24, #8 +} + 80028be: 4618 mov r0, r3 + 80028c0: 3714 adds r7, #20 + 80028c2: 46bd mov sp, r7 + 80028c4: f85d 7b04 ldr.w r7, [sp], #4 + 80028c8: 4770 bx lr + ... + +080028cc : + uint8_t val; + HAL_I2C_Mem_Read(&hi2c1, ICM20948_ADDR, reg, 1, &val, 1, HAL_MAX_DELAY); + return val; +} + +void write_register(uint8_t reg, uint8_t val) { + 80028cc: b580 push {r7, lr} + 80028ce: b086 sub sp, #24 + 80028d0: af04 add r7, sp, #16 + 80028d2: 4603 mov r3, r0 + 80028d4: 460a mov r2, r1 + 80028d6: 71fb strb r3, [r7, #7] + 80028d8: 4613 mov r3, r2 + 80028da: 71bb strb r3, [r7, #6] + HAL_I2C_Mem_Write(&hi2c1, ICM20948_ADDR, reg, 1, &val, 1, HAL_MAX_DELAY); + 80028dc: 79fb ldrb r3, [r7, #7] + 80028de: b29a uxth r2, r3 + 80028e0: f04f 33ff mov.w r3, #4294967295 + 80028e4: 9302 str r3, [sp, #8] + 80028e6: 2301 movs r3, #1 + 80028e8: 9301 str r3, [sp, #4] + 80028ea: 1dbb adds r3, r7, #6 + 80028ec: 9300 str r3, [sp, #0] + 80028ee: 2301 movs r3, #1 + 80028f0: 21d2 movs r1, #210 @ 0xd2 + 80028f2: 4803 ldr r0, [pc, #12] @ (8002900 ) + 80028f4: f002 f86e bl 80049d4 +} + 80028f8: bf00 nop + 80028fa: 3708 adds r7, #8 + 80028fc: 46bd mov sp, r7 + 80028fe: bd80 pop {r7, pc} + 8002900: 200001f0 .word 0x200001f0 + +08002904 : + +void icm20948_select_bank(uint8_t bank) { + 8002904: b580 push {r7, lr} + 8002906: b082 sub sp, #8 + 8002908: af00 add r7, sp, #0 + 800290a: 4603 mov r3, r0 + 800290c: 71fb strb r3, [r7, #7] + write_register(0x7F, bank << 4); // REG_BANK_SEL (0x7F) + 800290e: 79fb ldrb r3, [r7, #7] + 8002910: 011b lsls r3, r3, #4 + 8002912: b2db uxtb r3, r3 + 8002914: 4619 mov r1, r3 + 8002916: 207f movs r0, #127 @ 0x7f + 8002918: f7ff ffd8 bl 80028cc +} + 800291c: bf00 nop + 800291e: 3708 adds r7, #8 + 8002920: 46bd mov sp, r7 + 8002922: bd80 pop {r7, pc} + +08002924 : + +void icm20948_init(void) { + 8002924: b580 push {r7, lr} + 8002926: af00 add r7, sp, #0 + icm20948_select_bank(0); // BANK 0 + 8002928: 2000 movs r0, #0 + 800292a: f7ff ffeb bl 8002904 + write_register(0x06, 0x01); // PWR_MGMT_1: reset + 800292e: 2101 movs r1, #1 + 8002930: 2006 movs r0, #6 + 8002932: f7ff ffcb bl 80028cc + HAL_Delay(10); + 8002936: 200a movs r0, #10 + 8002938: f001 fbfc bl 8004134 + write_register(0x06, 0x01); // Clock source auto + 800293c: 2101 movs r1, #1 + 800293e: 2006 movs r0, #6 + 8002940: f7ff ffc4 bl 80028cc + + icm20948_select_bank(2); // BANK 2 + 8002944: 2002 movs r0, #2 + 8002946: f7ff ffdd bl 8002904 + // write_register(0x14, 0x00); // ACCEL_CONFIG: ±2g + write_register(0x14, 0x04); // ACCEL_CONFIG : ±8g (bits 2:1 = 10) + 800294a: 2104 movs r1, #4 + 800294c: 2014 movs r0, #20 + 800294e: f7ff ffbd bl 80028cc + + icm20948_select_bank(0); // Revenir en BANK 0 pour lecture + 8002952: 2000 movs r0, #0 + 8002954: f7ff ffd6 bl 8002904 +} + 8002958: bf00 nop + 800295a: bd80 pop {r7, pc} + +0800295c : + +void icm20948_read_accel(float *ax, float *ay, float *az) { + 800295c: b580 push {r7, lr} + 800295e: b08c sub sp, #48 @ 0x30 + 8002960: af04 add r7, sp, #16 + 8002962: 60f8 str r0, [r7, #12] + 8002964: 60b9 str r1, [r7, #8] + 8002966: 607a str r2, [r7, #4] + uint8_t data[6]; + HAL_I2C_Mem_Read(&hi2c1, ICM20948_ADDR, 0x2D, 1, data, 6, HAL_MAX_DELAY); + 8002968: f04f 33ff mov.w r3, #4294967295 + 800296c: 9302 str r3, [sp, #8] + 800296e: 2306 movs r3, #6 + 8002970: 9301 str r3, [sp, #4] + 8002972: f107 0314 add.w r3, r7, #20 + 8002976: 9300 str r3, [sp, #0] + 8002978: 2301 movs r3, #1 + 800297a: 222d movs r2, #45 @ 0x2d + 800297c: 21d2 movs r1, #210 @ 0xd2 + 800297e: 4823 ldr r0, [pc, #140] @ (8002a0c ) + 8002980: f002 f93c bl 8004bfc + int16_t x = (data[0] << 8) | data[1]; + 8002984: 7d3b ldrb r3, [r7, #20] + 8002986: b21b sxth r3, r3 + 8002988: 021b lsls r3, r3, #8 + 800298a: b21a sxth r2, r3 + 800298c: 7d7b ldrb r3, [r7, #21] + 800298e: b21b sxth r3, r3 + 8002990: 4313 orrs r3, r2 + 8002992: 83fb strh r3, [r7, #30] + int16_t y = (data[2] << 8) | data[3]; + 8002994: 7dbb ldrb r3, [r7, #22] + 8002996: b21b sxth r3, r3 + 8002998: 021b lsls r3, r3, #8 + 800299a: b21a sxth r2, r3 + 800299c: 7dfb ldrb r3, [r7, #23] + 800299e: b21b sxth r3, r3 + 80029a0: 4313 orrs r3, r2 + 80029a2: 83bb strh r3, [r7, #28] + int16_t z = (data[4] << 8) | data[5]; + 80029a4: 7e3b ldrb r3, [r7, #24] + 80029a6: b21b sxth r3, r3 + 80029a8: 021b lsls r3, r3, #8 + 80029aa: b21a sxth r2, r3 + 80029ac: 7e7b ldrb r3, [r7, #25] + 80029ae: b21b sxth r3, r3 + 80029b0: 4313 orrs r3, r2 + 80029b2: 837b strh r3, [r7, #26] + //*ax = (float)x / 16384.0f; + //*ay = (float)y / 16384.0f; + //*az = (float)z / 16384.0f; + *ax = (float)x / 4096.0f; + 80029b4: f9b7 301e ldrsh.w r3, [r7, #30] + 80029b8: ee07 3a90 vmov s15, r3 + 80029bc: eeb8 7ae7 vcvt.f32.s32 s14, s15 + 80029c0: eddf 6a13 vldr s13, [pc, #76] @ 8002a10 + 80029c4: eec7 7a26 vdiv.f32 s15, s14, s13 + 80029c8: 68fb ldr r3, [r7, #12] + 80029ca: edc3 7a00 vstr s15, [r3] + *ay = (float)y / 4096.0f; + 80029ce: f9b7 301c ldrsh.w r3, [r7, #28] + 80029d2: ee07 3a90 vmov s15, r3 + 80029d6: eeb8 7ae7 vcvt.f32.s32 s14, s15 + 80029da: eddf 6a0d vldr s13, [pc, #52] @ 8002a10 + 80029de: eec7 7a26 vdiv.f32 s15, s14, s13 + 80029e2: 68bb ldr r3, [r7, #8] + 80029e4: edc3 7a00 vstr s15, [r3] + *az = (float)z / 4096.0f; + 80029e8: f9b7 301a ldrsh.w r3, [r7, #26] + 80029ec: ee07 3a90 vmov s15, r3 + 80029f0: eeb8 7ae7 vcvt.f32.s32 s14, s15 + 80029f4: eddf 6a06 vldr s13, [pc, #24] @ 8002a10 + 80029f8: eec7 7a26 vdiv.f32 s15, s14, s13 + 80029fc: 687b ldr r3, [r7, #4] + 80029fe: edc3 7a00 vstr s15, [r3] + +} + 8002a02: bf00 nop + 8002a04: 3720 adds r7, #32 + 8002a06: 46bd mov sp, r7 + 8002a08: bd80 pop {r7, pc} + 8002a0a: bf00 nop + 8002a0c: 200001f0 .word 0x200001f0 + 8002a10: 45800000 .word 0x45800000 + +08002a14 : + +void icm20948_read_gyro(float *gx, float *gy, float *gz) { + 8002a14: b580 push {r7, lr} + 8002a16: b08c sub sp, #48 @ 0x30 + 8002a18: af04 add r7, sp, #16 + 8002a1a: 60f8 str r0, [r7, #12] + 8002a1c: 60b9 str r1, [r7, #8] + 8002a1e: 607a str r2, [r7, #4] + uint8_t data[6]; + icm20948_select_bank(0); + 8002a20: 2000 movs r0, #0 + 8002a22: f7ff ff6f bl 8002904 + HAL_I2C_Mem_Read(&hi2c1, ICM20948_ADDR, 0x33, 1, data, 6, HAL_MAX_DELAY); + 8002a26: f04f 33ff mov.w r3, #4294967295 + 8002a2a: 9302 str r3, [sp, #8] + 8002a2c: 2306 movs r3, #6 + 8002a2e: 9301 str r3, [sp, #4] + 8002a30: f107 0314 add.w r3, r7, #20 + 8002a34: 9300 str r3, [sp, #0] + 8002a36: 2301 movs r3, #1 + 8002a38: 2233 movs r2, #51 @ 0x33 + 8002a3a: 21d2 movs r1, #210 @ 0xd2 + 8002a3c: 4822 ldr r0, [pc, #136] @ (8002ac8 ) + 8002a3e: f002 f8dd bl 8004bfc + int16_t x = (data[0] << 8) | data[1]; + 8002a42: 7d3b ldrb r3, [r7, #20] + 8002a44: b21b sxth r3, r3 + 8002a46: 021b lsls r3, r3, #8 + 8002a48: b21a sxth r2, r3 + 8002a4a: 7d7b ldrb r3, [r7, #21] + 8002a4c: b21b sxth r3, r3 + 8002a4e: 4313 orrs r3, r2 + 8002a50: 83fb strh r3, [r7, #30] + int16_t y = (data[2] << 8) | data[3]; + 8002a52: 7dbb ldrb r3, [r7, #22] + 8002a54: b21b sxth r3, r3 + 8002a56: 021b lsls r3, r3, #8 + 8002a58: b21a sxth r2, r3 + 8002a5a: 7dfb ldrb r3, [r7, #23] + 8002a5c: b21b sxth r3, r3 + 8002a5e: 4313 orrs r3, r2 + 8002a60: 83bb strh r3, [r7, #28] + int16_t z = (data[4] << 8) | data[5]; + 8002a62: 7e3b ldrb r3, [r7, #24] + 8002a64: b21b sxth r3, r3 + 8002a66: 021b lsls r3, r3, #8 + 8002a68: b21a sxth r2, r3 + 8002a6a: 7e7b ldrb r3, [r7, #25] + 8002a6c: b21b sxth r3, r3 + 8002a6e: 4313 orrs r3, r2 + 8002a70: 837b strh r3, [r7, #26] + *gx = (float)x / 131.0f; // sensibilité typique ±250 dps + 8002a72: f9b7 301e ldrsh.w r3, [r7, #30] + 8002a76: ee07 3a90 vmov s15, r3 + 8002a7a: eeb8 7ae7 vcvt.f32.s32 s14, s15 + 8002a7e: eddf 6a13 vldr s13, [pc, #76] @ 8002acc + 8002a82: eec7 7a26 vdiv.f32 s15, s14, s13 + 8002a86: 68fb ldr r3, [r7, #12] + 8002a88: edc3 7a00 vstr s15, [r3] + *gy = (float)y / 131.0f; + 8002a8c: f9b7 301c ldrsh.w r3, [r7, #28] + 8002a90: ee07 3a90 vmov s15, r3 + 8002a94: eeb8 7ae7 vcvt.f32.s32 s14, s15 + 8002a98: eddf 6a0c vldr s13, [pc, #48] @ 8002acc + 8002a9c: eec7 7a26 vdiv.f32 s15, s14, s13 + 8002aa0: 68bb ldr r3, [r7, #8] + 8002aa2: edc3 7a00 vstr s15, [r3] + *gz = (float)z / 131.0f; + 8002aa6: f9b7 301a ldrsh.w r3, [r7, #26] + 8002aaa: ee07 3a90 vmov s15, r3 + 8002aae: eeb8 7ae7 vcvt.f32.s32 s14, s15 + 8002ab2: eddf 6a06 vldr s13, [pc, #24] @ 8002acc + 8002ab6: eec7 7a26 vdiv.f32 s15, s14, s13 + 8002aba: 687b ldr r3, [r7, #4] + 8002abc: edc3 7a00 vstr s15, [r3] +} + 8002ac0: bf00 nop + 8002ac2: 3720 adds r7, #32 + 8002ac4: 46bd mov sp, r7 + 8002ac6: bd80 pop {r7, pc} + 8002ac8: 200001f0 .word 0x200001f0 + 8002acc: 43030000 .word 0x43030000 + +08002ad0 : + // Exemples de setup (registres slave 0, adresse, etc.) + // ... + icm20948_select_bank(0); +} + +void icm20948_read_mag(float *mx, float *my, float *mz) { + 8002ad0: b580 push {r7, lr} + 8002ad2: b08c sub sp, #48 @ 0x30 + 8002ad4: af04 add r7, sp, #16 + 8002ad6: 60f8 str r0, [r7, #12] + 8002ad8: 60b9 str r1, [r7, #8] + 8002ada: 607a str r2, [r7, #4] + uint8_t data[6]; + // Lecture des registres magnéto via I2C Master + // Par défaut les données du magnétomètre sont relayées en registres USER_MAG_DATA_X/Y/Z + // ou on doit lire via I2C Master + // Exemple simplifié : + HAL_I2C_Mem_Read(&hi2c1, ICM20948_ADDR, 0x31, 1, data, 6, HAL_MAX_DELAY); + 8002adc: f04f 33ff mov.w r3, #4294967295 + 8002ae0: 9302 str r3, [sp, #8] + 8002ae2: 2306 movs r3, #6 + 8002ae4: 9301 str r3, [sp, #4] + 8002ae6: f107 0314 add.w r3, r7, #20 + 8002aea: 9300 str r3, [sp, #0] + 8002aec: 2301 movs r3, #1 + 8002aee: 2231 movs r2, #49 @ 0x31 + 8002af0: 21d2 movs r1, #210 @ 0xd2 + 8002af2: 4823 ldr r0, [pc, #140] @ (8002b80 ) + 8002af4: f002 f882 bl 8004bfc + int16_t x = (data[1] << 8) | data[0]; // Attention à l’ordre des octets pour AK09916 + 8002af8: 7d7b ldrb r3, [r7, #21] + 8002afa: b21b sxth r3, r3 + 8002afc: 021b lsls r3, r3, #8 + 8002afe: b21a sxth r2, r3 + 8002b00: 7d3b ldrb r3, [r7, #20] + 8002b02: b21b sxth r3, r3 + 8002b04: 4313 orrs r3, r2 + 8002b06: 83fb strh r3, [r7, #30] + int16_t y = (data[3] << 8) | data[2]; + 8002b08: 7dfb ldrb r3, [r7, #23] + 8002b0a: b21b sxth r3, r3 + 8002b0c: 021b lsls r3, r3, #8 + 8002b0e: b21a sxth r2, r3 + 8002b10: 7dbb ldrb r3, [r7, #22] + 8002b12: b21b sxth r3, r3 + 8002b14: 4313 orrs r3, r2 + 8002b16: 83bb strh r3, [r7, #28] + int16_t z = (data[5] << 8) | data[4]; + 8002b18: 7e7b ldrb r3, [r7, #25] + 8002b1a: b21b sxth r3, r3 + 8002b1c: 021b lsls r3, r3, #8 + 8002b1e: b21a sxth r2, r3 + 8002b20: 7e3b ldrb r3, [r7, #24] + 8002b22: b21b sxth r3, r3 + 8002b24: 4313 orrs r3, r2 + 8002b26: 837b strh r3, [r7, #26] + *mx = (float)x * 0.15f; // conversion en µT (selon datasheet) + 8002b28: f9b7 301e ldrsh.w r3, [r7, #30] + 8002b2c: ee07 3a90 vmov s15, r3 + 8002b30: eef8 7ae7 vcvt.f32.s32 s15, s15 + 8002b34: ed9f 7a13 vldr s14, [pc, #76] @ 8002b84 + 8002b38: ee67 7a87 vmul.f32 s15, s15, s14 + 8002b3c: 68fb ldr r3, [r7, #12] + 8002b3e: edc3 7a00 vstr s15, [r3] + *my = (float)y * 0.15f; + 8002b42: f9b7 301c ldrsh.w r3, [r7, #28] + 8002b46: ee07 3a90 vmov s15, r3 + 8002b4a: eef8 7ae7 vcvt.f32.s32 s15, s15 + 8002b4e: ed9f 7a0d vldr s14, [pc, #52] @ 8002b84 + 8002b52: ee67 7a87 vmul.f32 s15, s15, s14 + 8002b56: 68bb ldr r3, [r7, #8] + 8002b58: edc3 7a00 vstr s15, [r3] + *mz = (float)z * 0.15f; + 8002b5c: f9b7 301a ldrsh.w r3, [r7, #26] + 8002b60: ee07 3a90 vmov s15, r3 + 8002b64: eef8 7ae7 vcvt.f32.s32 s15, s15 + 8002b68: ed9f 7a06 vldr s14, [pc, #24] @ 8002b84 + 8002b6c: ee67 7a87 vmul.f32 s15, s15, s14 + 8002b70: 687b ldr r3, [r7, #4] + 8002b72: edc3 7a00 vstr s15, [r3] +} + 8002b76: bf00 nop + 8002b78: 3720 adds r7, #32 + 8002b7a: 46bd mov sp, r7 + 8002b7c: bd80 pop {r7, pc} + 8002b7e: bf00 nop + 8002b80: 200001f0 .word 0x200001f0 + 8002b84: 3e19999a .word 0x3e19999a + +08002b88 : + +void lcd_send_cmd(uint8_t cmd); +void lcd_send_data(uint8_t data); +void lcd_send(uint8_t data, uint8_t mode); + +void lcd_init(void) { + 8002b88: b580 push {r7, lr} + 8002b8a: af00 add r7, sp, #0 + HAL_Delay(50); + 8002b8c: 2032 movs r0, #50 @ 0x32 + 8002b8e: f001 fad1 bl 8004134 + lcd_send_cmd(0x33); + 8002b92: 2033 movs r0, #51 @ 0x33 + 8002b94: f000 f853 bl 8002c3e + lcd_send_cmd(0x32); + 8002b98: 2032 movs r0, #50 @ 0x32 + 8002b9a: f000 f850 bl 8002c3e + lcd_send_cmd(0x28); + 8002b9e: 2028 movs r0, #40 @ 0x28 + 8002ba0: f000 f84d bl 8002c3e + lcd_send_cmd(0x0C); + 8002ba4: 200c movs r0, #12 + 8002ba6: f000 f84a bl 8002c3e + lcd_send_cmd(0x06); + 8002baa: 2006 movs r0, #6 + 8002bac: f000 f847 bl 8002c3e + lcd_send_cmd(0x01); + 8002bb0: 2001 movs r0, #1 + 8002bb2: f000 f844 bl 8002c3e + HAL_Delay(5); + 8002bb6: 2005 movs r0, #5 + 8002bb8: f001 fabc bl 8004134 +} + 8002bbc: bf00 nop + 8002bbe: bd80 pop {r7, pc} + +08002bc0 : + +void lcd_clear(void) { + 8002bc0: b580 push {r7, lr} + 8002bc2: af00 add r7, sp, #0 + lcd_send_cmd(0x01); + 8002bc4: 2001 movs r0, #1 + 8002bc6: f000 f83a bl 8002c3e + HAL_Delay(2); + 8002bca: 2002 movs r0, #2 + 8002bcc: f001 fab2 bl 8004134 +} + 8002bd0: bf00 nop + 8002bd2: bd80 pop {r7, pc} + +08002bd4 : + +void lcd_set_cursor(uint8_t row, uint8_t col) { + 8002bd4: b580 push {r7, lr} + 8002bd6: b084 sub sp, #16 + 8002bd8: af00 add r7, sp, #0 + 8002bda: 4603 mov r3, r0 + 8002bdc: 460a mov r2, r1 + 8002bde: 71fb strb r3, [r7, #7] + 8002be0: 4613 mov r3, r2 + 8002be2: 71bb strb r3, [r7, #6] + const uint8_t row_offsets[] = {0x00, 0x40, 0x14, 0x54}; + 8002be4: 4b0a ldr r3, [pc, #40] @ (8002c10 ) + 8002be6: 60fb str r3, [r7, #12] + lcd_send_cmd(0x80 | (col + row_offsets[row])); + 8002be8: 79fb ldrb r3, [r7, #7] + 8002bea: 3310 adds r3, #16 + 8002bec: 443b add r3, r7 + 8002bee: f813 2c04 ldrb.w r2, [r3, #-4] + 8002bf2: 79bb ldrb r3, [r7, #6] + 8002bf4: 4413 add r3, r2 + 8002bf6: b2db uxtb r3, r3 + 8002bf8: b25b sxtb r3, r3 + 8002bfa: f063 037f orn r3, r3, #127 @ 0x7f + 8002bfe: b25b sxtb r3, r3 + 8002c00: b2db uxtb r3, r3 + 8002c02: 4618 mov r0, r3 + 8002c04: f000 f81b bl 8002c3e +} + 8002c08: bf00 nop + 8002c0a: 3710 adds r7, #16 + 8002c0c: 46bd mov sp, r7 + 8002c0e: bd80 pop {r7, pc} + 8002c10: 54144000 .word 0x54144000 + +08002c14 : + +void lcd_print(const char *str) { + 8002c14: b580 push {r7, lr} + 8002c16: b082 sub sp, #8 + 8002c18: af00 add r7, sp, #0 + 8002c1a: 6078 str r0, [r7, #4] + while (*str) { + 8002c1c: e006 b.n 8002c2c + lcd_send_data((uint8_t)(*str++)); + 8002c1e: 687b ldr r3, [r7, #4] + 8002c20: 1c5a adds r2, r3, #1 + 8002c22: 607a str r2, [r7, #4] + 8002c24: 781b ldrb r3, [r3, #0] + 8002c26: 4618 mov r0, r3 + 8002c28: f000 f817 bl 8002c5a + while (*str) { + 8002c2c: 687b ldr r3, [r7, #4] + 8002c2e: 781b ldrb r3, [r3, #0] + 8002c30: 2b00 cmp r3, #0 + 8002c32: d1f4 bne.n 8002c1e + } +} + 8002c34: bf00 nop + 8002c36: bf00 nop + 8002c38: 3708 adds r7, #8 + 8002c3a: 46bd mov sp, r7 + 8002c3c: bd80 pop {r7, pc} + +08002c3e : + +void lcd_send_cmd(uint8_t cmd) { + 8002c3e: b580 push {r7, lr} + 8002c40: b082 sub sp, #8 + 8002c42: af00 add r7, sp, #0 + 8002c44: 4603 mov r3, r0 + 8002c46: 71fb strb r3, [r7, #7] + lcd_send(cmd, 0); + 8002c48: 79fb ldrb r3, [r7, #7] + 8002c4a: 2100 movs r1, #0 + 8002c4c: 4618 mov r0, r3 + 8002c4e: f000 f813 bl 8002c78 +} + 8002c52: bf00 nop + 8002c54: 3708 adds r7, #8 + 8002c56: 46bd mov sp, r7 + 8002c58: bd80 pop {r7, pc} + +08002c5a : + +void lcd_send_data(uint8_t data) { + 8002c5a: b580 push {r7, lr} + 8002c5c: b082 sub sp, #8 + 8002c5e: af00 add r7, sp, #0 + 8002c60: 4603 mov r3, r0 + 8002c62: 71fb strb r3, [r7, #7] + lcd_send(data, 1); + 8002c64: 79fb ldrb r3, [r7, #7] + 8002c66: 2101 movs r1, #1 + 8002c68: 4618 mov r0, r3 + 8002c6a: f000 f805 bl 8002c78 +} + 8002c6e: bf00 nop + 8002c70: 3708 adds r7, #8 + 8002c72: 46bd mov sp, r7 + 8002c74: bd80 pop {r7, pc} + ... + +08002c78 : + +void lcd_send(uint8_t data, uint8_t mode) { + 8002c78: b580 push {r7, lr} + 8002c7a: b086 sub sp, #24 + 8002c7c: af02 add r7, sp, #8 + 8002c7e: 4603 mov r3, r0 + 8002c80: 460a mov r2, r1 + 8002c82: 71fb strb r3, [r7, #7] + 8002c84: 4613 mov r3, r2 + 8002c86: 71bb strb r3, [r7, #6] + uint8_t high = (data & 0xF0) | LCD_BACKLIGHT | (mode ? 0x01 : 0); + 8002c88: f997 3007 ldrsb.w r3, [r7, #7] + 8002c8c: f023 030f bic.w r3, r3, #15 + 8002c90: b25b sxtb r3, r3 + 8002c92: f043 0308 orr.w r3, r3, #8 + 8002c96: b25a sxtb r2, r3 + 8002c98: 79bb ldrb r3, [r7, #6] + 8002c9a: 2b00 cmp r3, #0 + 8002c9c: bf14 ite ne + 8002c9e: 2301 movne r3, #1 + 8002ca0: 2300 moveq r3, #0 + 8002ca2: b2db uxtb r3, r3 + 8002ca4: b25b sxtb r3, r3 + 8002ca6: 4313 orrs r3, r2 + 8002ca8: b25b sxtb r3, r3 + 8002caa: 73fb strb r3, [r7, #15] + uint8_t low = ((data << 4) & 0xF0) | LCD_BACKLIGHT | (mode ? 0x01 : 0); + 8002cac: f997 3007 ldrsb.w r3, [r7, #7] + 8002cb0: 011b lsls r3, r3, #4 + 8002cb2: b25b sxtb r3, r3 + 8002cb4: f043 0308 orr.w r3, r3, #8 + 8002cb8: b25a sxtb r2, r3 + 8002cba: 79bb ldrb r3, [r7, #6] + 8002cbc: 2b00 cmp r3, #0 + 8002cbe: bf14 ite ne + 8002cc0: 2301 movne r3, #1 + 8002cc2: 2300 moveq r3, #0 + 8002cc4: b2db uxtb r3, r3 + 8002cc6: b25b sxtb r3, r3 + 8002cc8: 4313 orrs r3, r2 + 8002cca: b25b sxtb r3, r3 + 8002ccc: 73bb strb r3, [r7, #14] + + uint8_t data_arr[4] = { + 8002cce: 7bfb ldrb r3, [r7, #15] + 8002cd0: f043 0304 orr.w r3, r3, #4 + 8002cd4: b2db uxtb r3, r3 + 8002cd6: 723b strb r3, [r7, #8] + 8002cd8: 7bfb ldrb r3, [r7, #15] + 8002cda: 727b strb r3, [r7, #9] + 8002cdc: 7bbb ldrb r3, [r7, #14] + 8002cde: f043 0304 orr.w r3, r3, #4 + 8002ce2: b2db uxtb r3, r3 + 8002ce4: 72bb strb r3, [r7, #10] + 8002ce6: 7bbb ldrb r3, [r7, #14] + 8002ce8: 72fb strb r3, [r7, #11] + high | LCD_ENABLE, high, + low | LCD_ENABLE, low + }; + HAL_I2C_Master_Transmit(&hi2c1, LCD_ADDR, data_arr, 4, HAL_MAX_DELAY); + 8002cea: f107 0208 add.w r2, r7, #8 + 8002cee: f04f 33ff mov.w r3, #4294967295 + 8002cf2: 9300 str r3, [sp, #0] + 8002cf4: 2304 movs r3, #4 + 8002cf6: 214e movs r1, #78 @ 0x4e + 8002cf8: 4803 ldr r0, [pc, #12] @ (8002d08 ) + 8002cfa: f001 fd53 bl 80047a4 + 8002cfe: bf00 nop + 8002d00: 3710 adds r7, #16 + 8002d02: 46bd mov sp, r7 + 8002d04: bd80 pop {r7, pc} + 8002d06: bf00 nop + 8002d08: 200001f0 .word 0x200001f0 + +08002d0c : +static inline float FusionRadiansToDegrees(const float radians) { + 8002d0c: b480 push {r7} + 8002d0e: b083 sub sp, #12 + 8002d10: af00 add r7, sp, #0 + 8002d12: ed87 0a01 vstr s0, [r7, #4] + return radians * (180.0f / (float) M_PI); + 8002d16: edd7 7a01 vldr s15, [r7, #4] + 8002d1a: ed9f 7a05 vldr s14, [pc, #20] @ 8002d30 + 8002d1e: ee67 7a87 vmul.f32 s15, s15, s14 +} + 8002d22: eeb0 0a67 vmov.f32 s0, s15 + 8002d26: 370c adds r7, #12 + 8002d28: 46bd mov sp, r7 + 8002d2a: f85d 7b04 ldr.w r7, [sp], #4 + 8002d2e: 4770 bx lr + 8002d30: 42652ee0 .word 0x42652ee0 + +08002d34 : +static inline float FusionAsin(const float value) { + 8002d34: b580 push {r7, lr} + 8002d36: b082 sub sp, #8 + 8002d38: af00 add r7, sp, #0 + 8002d3a: ed87 0a01 vstr s0, [r7, #4] + if (value <= -1.0f) { + 8002d3e: edd7 7a01 vldr s15, [r7, #4] + 8002d42: eebf 7a00 vmov.f32 s14, #240 @ 0xbf800000 -1.0 + 8002d46: eef4 7ac7 vcmpe.f32 s15, s14 + 8002d4a: eef1 fa10 vmrs APSR_nzcv, fpscr + 8002d4e: d802 bhi.n 8002d56 + return (float) M_PI / -2.0f; + 8002d50: eddf 7a0c vldr s15, [pc, #48] @ 8002d84 + 8002d54: e011 b.n 8002d7a + if (value >= 1.0f) { + 8002d56: edd7 7a01 vldr s15, [r7, #4] + 8002d5a: eeb7 7a00 vmov.f32 s14, #112 @ 0x3f800000 1.0 + 8002d5e: eef4 7ac7 vcmpe.f32 s15, s14 + 8002d62: eef1 fa10 vmrs APSR_nzcv, fpscr + 8002d66: db02 blt.n 8002d6e + return (float) M_PI / 2.0f; + 8002d68: eddf 7a07 vldr s15, [pc, #28] @ 8002d88 + 8002d6c: e005 b.n 8002d7a + return asinf(value); + 8002d6e: ed97 0a01 vldr s0, [r7, #4] + 8002d72: f007 f99b bl 800a0ac + 8002d76: eef0 7a40 vmov.f32 s15, s0 +} + 8002d7a: eeb0 0a67 vmov.f32 s0, s15 + 8002d7e: 3708 adds r7, #8 + 8002d80: 46bd mov sp, r7 + 8002d82: bd80 pop {r7, pc} + 8002d84: bfc90fdb .word 0xbfc90fdb + 8002d88: 3fc90fdb .word 0x3fc90fdb + +08002d8c : +/** + * @brief Converts a quaternion to ZYX Euler angles in degrees. + * @param quaternion Quaternion. + * @return Euler angles in degrees. + */ +static inline FusionEuler FusionQuaternionToEuler(const FusionQuaternion quaternion) { + 8002d8c: b580 push {r7, lr} + 8002d8e: b090 sub sp, #64 @ 0x40 + 8002d90: af00 add r7, sp, #0 + 8002d92: eeb0 6a40 vmov.f32 s12, s0 + 8002d96: eef0 6a60 vmov.f32 s13, s1 + 8002d9a: eeb0 7a41 vmov.f32 s14, s2 + 8002d9e: eef0 7a61 vmov.f32 s15, s3 + 8002da2: ed87 6a04 vstr s12, [r7, #16] + 8002da6: edc7 6a05 vstr s13, [r7, #20] + 8002daa: ed87 7a06 vstr s14, [r7, #24] + 8002dae: edc7 7a07 vstr s15, [r7, #28] +#define Q quaternion.element + const float halfMinusQySquared = 0.5f - Q.y * Q.y; // calculate common terms to avoid repeated operations + 8002db2: ed97 7a06 vldr s14, [r7, #24] + 8002db6: edd7 7a06 vldr s15, [r7, #24] + 8002dba: ee67 7a27 vmul.f32 s15, s14, s15 + 8002dbe: eeb6 7a00 vmov.f32 s14, #96 @ 0x3f000000 0.5 + 8002dc2: ee77 7a67 vsub.f32 s15, s14, s15 + 8002dc6: edc7 7a0f vstr s15, [r7, #60] @ 0x3c + const FusionEuler euler = {.angle = { + .roll = FusionRadiansToDegrees(atan2f(Q.w * Q.x + Q.y * Q.z, halfMinusQySquared - Q.x * Q.x)), + 8002dca: ed97 7a04 vldr s14, [r7, #16] + 8002dce: edd7 7a05 vldr s15, [r7, #20] + 8002dd2: ee27 7a27 vmul.f32 s14, s14, s15 + 8002dd6: edd7 6a06 vldr s13, [r7, #24] + 8002dda: edd7 7a07 vldr s15, [r7, #28] + 8002dde: ee66 7aa7 vmul.f32 s15, s13, s15 + 8002de2: ee77 6a27 vadd.f32 s13, s14, s15 + 8002de6: ed97 7a05 vldr s14, [r7, #20] + 8002dea: edd7 7a05 vldr s15, [r7, #20] + 8002dee: ee67 7a27 vmul.f32 s15, s14, s15 + 8002df2: ed97 7a0f vldr s14, [r7, #60] @ 0x3c + 8002df6: ee77 7a67 vsub.f32 s15, s14, s15 + 8002dfa: eef0 0a67 vmov.f32 s1, s15 + 8002dfe: eeb0 0a66 vmov.f32 s0, s13 + 8002e02: f007 f97f bl 800a104 + 8002e06: eef0 7a40 vmov.f32 s15, s0 + 8002e0a: eeb0 0a67 vmov.f32 s0, s15 + 8002e0e: f7ff ff7d bl 8002d0c + 8002e12: eef0 7a40 vmov.f32 s15, s0 + const FusionEuler euler = {.angle = { + 8002e16: edc7 7a09 vstr s15, [r7, #36] @ 0x24 + .pitch = FusionRadiansToDegrees(FusionAsin(2.0f * (Q.w * Q.y - Q.z * Q.x))), + 8002e1a: ed97 7a04 vldr s14, [r7, #16] + 8002e1e: edd7 7a06 vldr s15, [r7, #24] + 8002e22: ee27 7a27 vmul.f32 s14, s14, s15 + 8002e26: edd7 6a07 vldr s13, [r7, #28] + 8002e2a: edd7 7a05 vldr s15, [r7, #20] + 8002e2e: ee66 7aa7 vmul.f32 s15, s13, s15 + 8002e32: ee77 7a67 vsub.f32 s15, s14, s15 + 8002e36: ee77 7aa7 vadd.f32 s15, s15, s15 + 8002e3a: eeb0 0a67 vmov.f32 s0, s15 + 8002e3e: f7ff ff79 bl 8002d34 + 8002e42: eef0 7a40 vmov.f32 s15, s0 + 8002e46: eeb0 0a67 vmov.f32 s0, s15 + 8002e4a: f7ff ff5f bl 8002d0c + 8002e4e: eef0 7a40 vmov.f32 s15, s0 + const FusionEuler euler = {.angle = { + 8002e52: edc7 7a0a vstr s15, [r7, #40] @ 0x28 + .yaw = FusionRadiansToDegrees(atan2f(Q.w * Q.z + Q.x * Q.y, halfMinusQySquared - Q.z * Q.z)), + 8002e56: ed97 7a04 vldr s14, [r7, #16] + 8002e5a: edd7 7a07 vldr s15, [r7, #28] + 8002e5e: ee27 7a27 vmul.f32 s14, s14, s15 + 8002e62: edd7 6a05 vldr s13, [r7, #20] + 8002e66: edd7 7a06 vldr s15, [r7, #24] + 8002e6a: ee66 7aa7 vmul.f32 s15, s13, s15 + 8002e6e: ee77 6a27 vadd.f32 s13, s14, s15 + 8002e72: ed97 7a07 vldr s14, [r7, #28] + 8002e76: edd7 7a07 vldr s15, [r7, #28] + 8002e7a: ee67 7a27 vmul.f32 s15, s14, s15 + 8002e7e: ed97 7a0f vldr s14, [r7, #60] @ 0x3c + 8002e82: ee77 7a67 vsub.f32 s15, s14, s15 + 8002e86: eef0 0a67 vmov.f32 s1, s15 + 8002e8a: eeb0 0a66 vmov.f32 s0, s13 + 8002e8e: f007 f939 bl 800a104 + 8002e92: eef0 7a40 vmov.f32 s15, s0 + 8002e96: eeb0 0a67 vmov.f32 s0, s15 + 8002e9a: f7ff ff37 bl 8002d0c + 8002e9e: eef0 7a40 vmov.f32 s15, s0 + const FusionEuler euler = {.angle = { + 8002ea2: edc7 7a0b vstr s15, [r7, #44] @ 0x2c + }}; + return euler; + 8002ea6: f107 0330 add.w r3, r7, #48 @ 0x30 + 8002eaa: f107 0224 add.w r2, r7, #36 @ 0x24 + 8002eae: ca07 ldmia r2, {r0, r1, r2} + 8002eb0: e883 0007 stmia.w r3, {r0, r1, r2} + 8002eb4: 6b39 ldr r1, [r7, #48] @ 0x30 + 8002eb6: 6b7a ldr r2, [r7, #52] @ 0x34 + 8002eb8: 6bbb ldr r3, [r7, #56] @ 0x38 + 8002eba: ee06 1a90 vmov s13, r1 + 8002ebe: ee07 2a10 vmov s14, r2 + 8002ec2: ee07 3a90 vmov s15, r3 +#undef Q +} + 8002ec6: eeb0 0a66 vmov.f32 s0, s13 + 8002eca: eef0 0a47 vmov.f32 s1, s14 + 8002ece: eeb0 1a67 vmov.f32 s2, s15 + 8002ed2: 3740 adds r7, #64 @ 0x40 + 8002ed4: 46bd mov sp, r7 + 8002ed6: bd80 pop {r7, pc} + +08002ed8 <__io_putchar>: +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +static void MX_I2C1_Init(void); +static void MX_USART2_UART_Init(void); + +int __io_putchar(int ch) { + 8002ed8: b580 push {r7, lr} + 8002eda: b082 sub sp, #8 + 8002edc: af00 add r7, sp, #0 + 8002ede: 6078 str r0, [r7, #4] + HAL_UART_Transmit(&huart2, (uint8_t *)&ch, 1, HAL_MAX_DELAY); + 8002ee0: 1d39 adds r1, r7, #4 + 8002ee2: f04f 33ff mov.w r3, #4294967295 + 8002ee6: 2201 movs r2, #1 + 8002ee8: 4803 ldr r0, [pc, #12] @ (8002ef8 <__io_putchar+0x20>) + 8002eea: f003 fd43 bl 8006974 + return ch; + 8002eee: 687b ldr r3, [r7, #4] +} + 8002ef0: 4618 mov r0, r3 + 8002ef2: 3708 adds r7, #8 + 8002ef4: 46bd mov sp, r7 + 8002ef6: bd80 pop {r7, pc} + 8002ef8: 20000244 .word 0x20000244 + +08002efc
: + +// Variables pour le filtrage du magnétomètre +float mx_filtered = 0.0f, my_filtered = 0.0f, mz_filtered = 0.0f; + +int main(void) { + 8002efc: e92d 4ff0 stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, fp, lr} + 8002f00: b0c9 sub sp, #292 @ 0x124 + 8002f02: af0e add r7, sp, #56 @ 0x38 + HAL_Init(); + 8002f04: f001 f89a bl 800403c + SystemClock_Config(); + 8002f08: f000 fa5c bl 80033c4 + MX_GPIO_Init(); + 8002f0c: f000 fb1c bl 8003548 + MX_I2C1_Init(); + 8002f10: f000 faaa bl 8003468 + MX_USART2_UART_Init(); + 8002f14: f000 fae8 bl 80034e8 + + // Initialisation de l'écran + lcd_init(); + 8002f18: f7ff fe36 bl 8002b88 + lcd_clear(); + 8002f1c: f7ff fe50 bl 8002bc0 + lcd_set_cursor(0, 0); + 8002f20: 2100 movs r1, #0 + 8002f22: 2000 movs r0, #0 + 8002f24: f7ff fe56 bl 8002bd4 + lcd_print("MOTO IMU SYSTEM"); + 8002f28: 48d5 ldr r0, [pc, #852] @ (8003280 ) + 8002f2a: f7ff fe73 bl 8002c14 + HAL_Delay(1000); + 8002f2e: f44f 707a mov.w r0, #1000 @ 0x3e8 + 8002f32: f001 f8ff bl 8004134 + + // Initialisation de l'IMU + icm20948_init(); + 8002f36: f7ff fcf5 bl 8002924 + + // Initialisation de la fusion AHRS + FusionAhrsInitialise(&ahrs); + 8002f3a: 48d2 ldr r0, [pc, #840] @ (8003284 ) + 8002f3c: f7fe fc80 bl 8001840 + + FusionAhrsSettings settings = { + 8002f40: 4bd1 ldr r3, [pc, #836] @ (8003288 ) + 8002f42: f107 049c add.w r4, r7, #156 @ 0x9c + 8002f46: 461d mov r5, r3 + 8002f48: cd0f ldmia r5!, {r0, r1, r2, r3} + 8002f4a: c40f stmia r4!, {r0, r1, r2, r3} + 8002f4c: e895 0003 ldmia.w r5, {r0, r1} + 8002f50: e884 0003 stmia.w r4, {r0, r1} + .gyroscopeRange = 2000.0f, // Range du gyroscope en dps + .accelerationRejection = 15.0f, // Rejet modéré (vibrations moto) + .magneticRejection = 30.0f, // Rejet élevé (interférences métalliques) + .recoveryTriggerPeriod = (int)(2.0f / MOTO_SAMPLE_PERIOD) // 2 secondes + }; + FusionAhrsSetSettings(&ahrs, &settings); + 8002f54: f107 039c add.w r3, r7, #156 @ 0x9c + 8002f58: 4619 mov r1, r3 + 8002f5a: 48ca ldr r0, [pc, #808] @ (8003284 ) + 8002f5c: f7fe fcf2 bl 8001944 + + // Initialisation des données moto + Moto_InitData(&moto_data); + 8002f60: 48ca ldr r0, [pc, #808] @ (800328c ) + 8002f62: f000 fb81 bl 8003668 + + + + uint32_t last_time = HAL_GetTick(); + 8002f66: f001 f8d9 bl 800411c + 8002f6a: f8c7 00e4 str.w r0, [r7, #228] @ 0xe4 + uint32_t init_start_time = last_time; + 8002f6e: f8d7 30e4 ldr.w r3, [r7, #228] @ 0xe4 + 8002f72: f8c7 30d8 str.w r3, [r7, #216] @ 0xd8 + uint32_t display_update_counter = 0; + 8002f76: 2300 movs r3, #0 + 8002f78: f8c7 30e0 str.w r3, [r7, #224] @ 0xe0 + + while (1) { + uint32_t current_time = HAL_GetTick(); + 8002f7c: f001 f8ce bl 800411c + 8002f80: f8c7 00d4 str.w r0, [r7, #212] @ 0xd4 + float dt = (current_time - last_time) / 1000.0f; + 8002f84: f8d7 20d4 ldr.w r2, [r7, #212] @ 0xd4 + 8002f88: f8d7 30e4 ldr.w r3, [r7, #228] @ 0xe4 + 8002f8c: 1ad3 subs r3, r2, r3 + 8002f8e: ee07 3a90 vmov s15, r3 + 8002f92: eeb8 7a67 vcvt.f32.u32 s14, s15 + 8002f96: eddf 6abe vldr s13, [pc, #760] @ 8003290 + 8002f9a: eec7 7a26 vdiv.f32 s15, s14, s13 + 8002f9e: edc7 7a34 vstr s15, [r7, #208] @ 0xd0 + + if (dt >= MOTO_SAMPLE_PERIOD) { + 8002fa2: edd7 7a34 vldr s15, [r7, #208] @ 0xd0 + 8002fa6: ed9f 7abb vldr s14, [pc, #748] @ 8003294 + 8002faa: eef4 7ac7 vcmpe.f32 s15, s14 + 8002fae: eef1 fa10 vmrs APSR_nzcv, fpscr + 8002fb2: f2c0 81f5 blt.w 80033a0 + float ax, ay, az; // Accéléromètre + float gx, gy, gz; // Gyroscope + float mx, my, mz; // Magnétomètre + + // Lecture des capteurs + icm20948_read_accel(&ax, &ay, &az); + 8002fb6: f107 0290 add.w r2, r7, #144 @ 0x90 + 8002fba: f107 0194 add.w r1, r7, #148 @ 0x94 + 8002fbe: f107 0398 add.w r3, r7, #152 @ 0x98 + 8002fc2: 4618 mov r0, r3 + 8002fc4: f7ff fcca bl 800295c + icm20948_read_gyro(&gx, &gy, &gz); + 8002fc8: f107 0284 add.w r2, r7, #132 @ 0x84 + 8002fcc: f107 0188 add.w r1, r7, #136 @ 0x88 + 8002fd0: f107 038c add.w r3, r7, #140 @ 0x8c + 8002fd4: 4618 mov r0, r3 + 8002fd6: f7ff fd1d bl 8002a14 + icm20948_read_mag(&mx, &my, &mz); + 8002fda: f107 0278 add.w r2, r7, #120 @ 0x78 + 8002fde: f107 017c add.w r1, r7, #124 @ 0x7c + 8002fe2: f107 0380 add.w r3, r7, #128 @ 0x80 + 8002fe6: 4618 mov r0, r3 + 8002fe8: f7ff fd72 bl 8002ad0 + + // Calibration et filtrage du magnétomètre + Moto_CalibrateMagnetometer(&mx, &my, &mz); + 8002fec: f107 0278 add.w r2, r7, #120 @ 0x78 + 8002ff0: f107 017c add.w r1, r7, #124 @ 0x7c + 8002ff4: f107 0380 add.w r3, r7, #128 @ 0x80 + 8002ff8: 4618 mov r0, r3 + 8002ffa: f000 fd04 bl 8003a06 + mx_filtered = MOTO_MAG_FILTER_ALPHA * mx + (1.0f - MOTO_MAG_FILTER_ALPHA) * mx_filtered; + 8002ffe: edd7 7a20 vldr s15, [r7, #128] @ 0x80 + 8003002: ed9f 7aa5 vldr s14, [pc, #660] @ 8003298 + 8003006: ee27 7a87 vmul.f32 s14, s15, s14 + 800300a: 4ba4 ldr r3, [pc, #656] @ (800329c ) + 800300c: edd3 7a00 vldr s15, [r3] + 8003010: eddf 6aa3 vldr s13, [pc, #652] @ 80032a0 + 8003014: ee67 7aa6 vmul.f32 s15, s15, s13 + 8003018: ee77 7a27 vadd.f32 s15, s14, s15 + 800301c: 4b9f ldr r3, [pc, #636] @ (800329c ) + 800301e: edc3 7a00 vstr s15, [r3] + my_filtered = MOTO_MAG_FILTER_ALPHA * my + (1.0f - MOTO_MAG_FILTER_ALPHA) * my_filtered; + 8003022: edd7 7a1f vldr s15, [r7, #124] @ 0x7c + 8003026: ed9f 7a9c vldr s14, [pc, #624] @ 8003298 + 800302a: ee27 7a87 vmul.f32 s14, s15, s14 + 800302e: 4b9d ldr r3, [pc, #628] @ (80032a4 ) + 8003030: edd3 7a00 vldr s15, [r3] + 8003034: eddf 6a9a vldr s13, [pc, #616] @ 80032a0 + 8003038: ee67 7aa6 vmul.f32 s15, s15, s13 + 800303c: ee77 7a27 vadd.f32 s15, s14, s15 + 8003040: 4b98 ldr r3, [pc, #608] @ (80032a4 ) + 8003042: edc3 7a00 vstr s15, [r3] + mz_filtered = MOTO_MAG_FILTER_ALPHA * mz + (1.0f - MOTO_MAG_FILTER_ALPHA) * mz_filtered; + 8003046: edd7 7a1e vldr s15, [r7, #120] @ 0x78 + 800304a: ed9f 7a93 vldr s14, [pc, #588] @ 8003298 + 800304e: ee27 7a87 vmul.f32 s14, s15, s14 + 8003052: 4b95 ldr r3, [pc, #596] @ (80032a8 ) + 8003054: edd3 7a00 vldr s15, [r3] + 8003058: eddf 6a91 vldr s13, [pc, #580] @ 80032a0 + 800305c: ee67 7aa6 vmul.f32 s15, s15, s13 + 8003060: ee77 7a27 vadd.f32 s15, s14, s15 + 8003064: 4b90 ldr r3, [pc, #576] @ (80032a8 ) + 8003066: edc3 7a00 vstr s15, [r3] + + // Préparation des données pour Fusion + FusionVector gyroscope = {gx, gy, gz}; + 800306a: f8d7 308c ldr.w r3, [r7, #140] @ 0x8c + 800306e: 66fb str r3, [r7, #108] @ 0x6c + 8003070: f8d7 3088 ldr.w r3, [r7, #136] @ 0x88 + 8003074: 673b str r3, [r7, #112] @ 0x70 + 8003076: f8d7 3084 ldr.w r3, [r7, #132] @ 0x84 + 800307a: 677b str r3, [r7, #116] @ 0x74 + FusionVector accelerometer = {ax, ay, az}; + 800307c: f8d7 3098 ldr.w r3, [r7, #152] @ 0x98 + 8003080: 663b str r3, [r7, #96] @ 0x60 + 8003082: f8d7 3094 ldr.w r3, [r7, #148] @ 0x94 + 8003086: 667b str r3, [r7, #100] @ 0x64 + 8003088: f8d7 3090 ldr.w r3, [r7, #144] @ 0x90 + 800308c: 66bb str r3, [r7, #104] @ 0x68 + FusionVector magnetometer = {mx_filtered, my_filtered, mz_filtered}; + 800308e: 4b83 ldr r3, [pc, #524] @ (800329c ) + 8003090: 681b ldr r3, [r3, #0] + 8003092: 657b str r3, [r7, #84] @ 0x54 + 8003094: 4b83 ldr r3, [pc, #524] @ (80032a4 ) + 8003096: 681b ldr r3, [r3, #0] + 8003098: 65bb str r3, [r7, #88] @ 0x58 + 800309a: 4b83 ldr r3, [pc, #524] @ (80032a8 ) + 800309c: 681b ldr r3, [r3, #0] + 800309e: 65fb str r3, [r7, #92] @ 0x5c + + // Mise à jour AHRS + FusionAhrsUpdate(&ahrs, gyroscope, accelerometer, magnetometer, dt); + 80030a0: ed97 3a15 vldr s6, [r7, #84] @ 0x54 + 80030a4: edd7 3a16 vldr s7, [r7, #88] @ 0x58 + 80030a8: ed97 4a17 vldr s8, [r7, #92] @ 0x5c + 80030ac: ed97 5a18 vldr s10, [r7, #96] @ 0x60 + 80030b0: edd7 5a19 vldr s11, [r7, #100] @ 0x64 + 80030b4: ed97 6a1a vldr s12, [r7, #104] @ 0x68 + 80030b8: edd7 6a1b vldr s13, [r7, #108] @ 0x6c + 80030bc: ed97 7a1c vldr s14, [r7, #112] @ 0x70 + 80030c0: edd7 7a1d vldr s15, [r7, #116] @ 0x74 + 80030c4: edd7 4a34 vldr s9, [r7, #208] @ 0xd0 + 80030c8: eef0 1a45 vmov.f32 s3, s10 + 80030cc: eeb0 2a65 vmov.f32 s4, s11 + 80030d0: eef0 2a46 vmov.f32 s5, s12 + 80030d4: eeb0 0a66 vmov.f32 s0, s13 + 80030d8: eef0 0a47 vmov.f32 s1, s14 + 80030dc: eeb0 1a67 vmov.f32 s2, s15 + 80030e0: 4868 ldr r0, [pc, #416] @ (8003284 ) + 80030e2: f7fe fce7 bl 8001ab4 + + // Récupération des angles d'Euler + FusionEuler euler = FusionQuaternionToEuler(FusionAhrsGetQuaternion(&ahrs)); + 80030e6: 4867 ldr r0, [pc, #412] @ (8003284 ) + 80030e8: f7ff fb08 bl 80026fc + 80030ec: eeb0 6a40 vmov.f32 s12, s0 + 80030f0: eef0 6a60 vmov.f32 s13, s1 + 80030f4: eeb0 7a41 vmov.f32 s14, s2 + 80030f8: eef0 7a61 vmov.f32 s15, s3 + 80030fc: ed87 6a2d vstr s12, [r7, #180] @ 0xb4 + 8003100: edc7 6a2e vstr s13, [r7, #184] @ 0xb8 + 8003104: ed87 7a2f vstr s14, [r7, #188] @ 0xbc + 8003108: edc7 7a30 vstr s15, [r7, #192] @ 0xc0 + 800310c: ed97 6a2d vldr s12, [r7, #180] @ 0xb4 + 8003110: edd7 6a2e vldr s13, [r7, #184] @ 0xb8 + 8003114: ed97 7a2f vldr s14, [r7, #188] @ 0xbc + 8003118: edd7 7a30 vldr s15, [r7, #192] @ 0xc0 + 800311c: eeb0 0a46 vmov.f32 s0, s12 + 8003120: eef0 0a66 vmov.f32 s1, s13 + 8003124: eeb0 1a47 vmov.f32 s2, s14 + 8003128: eef0 1a67 vmov.f32 s3, s15 + 800312c: f7ff fe2e bl 8002d8c + 8003130: eef0 6a40 vmov.f32 s13, s0 + 8003134: eeb0 7a60 vmov.f32 s14, s1 + 8003138: eef0 7a41 vmov.f32 s15, s2 + 800313c: edc7 6a12 vstr s13, [r7, #72] @ 0x48 + 8003140: ed87 7a13 vstr s14, [r7, #76] @ 0x4c + 8003144: edc7 7a14 vstr s15, [r7, #80] @ 0x50 + float roll = euler.angle.roll; + 8003148: 6cbb ldr r3, [r7, #72] @ 0x48 + 800314a: f8c7 30cc str.w r3, [r7, #204] @ 0xcc + float pitch = euler.angle.pitch; + 800314e: 6cfb ldr r3, [r7, #76] @ 0x4c + 8003150: f8c7 30c8 str.w r3, [r7, #200] @ 0xc8 + float yaw = euler.angle.yaw; + 8003154: 6d3b ldr r3, [r7, #80] @ 0x50 + 8003156: f8c7 30c4 str.w r3, [r7, #196] @ 0xc4 + + // Vérification de la phase d'initialisation + FusionAhrsFlags flags = FusionAhrsGetFlags(&ahrs); + 800315a: 484a ldr r0, [pc, #296] @ (8003284 ) + 800315c: f7ff fb80 bl 8002860 + 8003160: 4603 mov r3, r0 + 8003162: 647b str r3, [r7, #68] @ 0x44 + moto_data.is_initializing = flags.initialising; + 8003164: f897 2044 ldrb.w r2, [r7, #68] @ 0x44 + 8003168: 4b48 ldr r3, [pc, #288] @ (800328c ) + 800316a: 765a strb r2, [r3, #25] + + // Mise à jour de l'état de la moto + Moto_UpdateState(&moto_data, roll, pitch, yaw, gx, gy, gz); + 800316c: edd7 7a23 vldr s15, [r7, #140] @ 0x8c + 8003170: ed97 7a22 vldr s14, [r7, #136] @ 0x88 + 8003174: edd7 6a21 vldr s13, [r7, #132] @ 0x84 + 8003178: eef0 2a66 vmov.f32 s5, s13 + 800317c: eeb0 2a47 vmov.f32 s4, s14 + 8003180: eef0 1a67 vmov.f32 s3, s15 + 8003184: ed97 1a31 vldr s2, [r7, #196] @ 0xc4 + 8003188: edd7 0a32 vldr s1, [r7, #200] @ 0xc8 + 800318c: ed97 0a33 vldr s0, [r7, #204] @ 0xcc + 8003190: 483e ldr r0, [pc, #248] @ (800328c ) + 8003192: f000 fa7f bl 8003694 + Moto_FilterAngles(&moto_data); + 8003196: 483d ldr r0, [pc, #244] @ (800328c ) + 8003198: f000 fb0c bl 80037b4 + Moto_UpdateStats(&moto_stats, &moto_data, gx, gy, gz); + 800319c: edd7 7a23 vldr s15, [r7, #140] @ 0x8c + 80031a0: ed97 7a22 vldr s14, [r7, #136] @ 0x88 + 80031a4: edd7 6a21 vldr s13, [r7, #132] @ 0x84 + 80031a8: eeb0 1a66 vmov.f32 s2, s13 + 80031ac: eef0 0a47 vmov.f32 s1, s14 + 80031b0: eeb0 0a67 vmov.f32 s0, s15 + 80031b4: 4935 ldr r1, [pc, #212] @ (800328c ) + 80031b6: 483d ldr r0, [pc, #244] @ (80032ac ) + 80031b8: f000 fb84 bl 80038c4 + + // Mise à jour de l'affichage (toutes les 5 itérations = ~50ms) + display_update_counter++; + 80031bc: f8d7 30e0 ldr.w r3, [r7, #224] @ 0xe0 + 80031c0: 3301 adds r3, #1 + 80031c2: f8c7 30e0 str.w r3, [r7, #224] @ 0xe0 + if (display_update_counter >= 5) { + 80031c6: f8d7 30e0 ldr.w r3, [r7, #224] @ 0xe0 + 80031ca: 2b04 cmp r3, #4 + 80031cc: d923 bls.n 8003216 + char buffer[21]; + + for (int line = 0; line < 4; line++) { + 80031ce: 2300 movs r3, #0 + 80031d0: f8c7 30dc str.w r3, [r7, #220] @ 0xdc + 80031d4: e018 b.n 8003208 + Moto_FormatDisplay(&moto_data, line, buffer); + 80031d6: f107 032c add.w r3, r7, #44 @ 0x2c + 80031da: 461a mov r2, r3 + 80031dc: f8d7 10dc ldr.w r1, [r7, #220] @ 0xdc + 80031e0: 482a ldr r0, [pc, #168] @ (800328c ) + 80031e2: f000 fc55 bl 8003a90 + lcd_set_cursor(line, 0); + 80031e6: f8d7 30dc ldr.w r3, [r7, #220] @ 0xdc + 80031ea: b2db uxtb r3, r3 + 80031ec: 2100 movs r1, #0 + 80031ee: 4618 mov r0, r3 + 80031f0: f7ff fcf0 bl 8002bd4 + lcd_print(buffer); + 80031f4: f107 032c add.w r3, r7, #44 @ 0x2c + 80031f8: 4618 mov r0, r3 + 80031fa: f7ff fd0b bl 8002c14 + for (int line = 0; line < 4; line++) { + 80031fe: f8d7 30dc ldr.w r3, [r7, #220] @ 0xdc + 8003202: 3301 adds r3, #1 + 8003204: f8c7 30dc str.w r3, [r7, #220] @ 0xdc + 8003208: f8d7 30dc ldr.w r3, [r7, #220] @ 0xdc + 800320c: 2b03 cmp r3, #3 + 800320e: dde2 ble.n 80031d6 + } + + display_update_counter = 0; + 8003210: 2300 movs r3, #0 + 8003212: f8c7 30e0 str.w r3, [r7, #224] @ 0xe0 + } + + // LED d'état + switch (moto_data.state) { + 8003216: 4b1d ldr r3, [pc, #116] @ (800328c ) + 8003218: 7e1b ldrb r3, [r3, #24] + 800321a: 2b06 cmp r3, #6 + 800321c: d864 bhi.n 80032e8 + 800321e: a201 add r2, pc, #4 @ (adr r2, 8003224 ) + 8003220: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 8003224: 08003241 .word 0x08003241 + 8003228: 0800324f .word 0x0800324f + 800322c: 080032b9 .word 0x080032b9 + 8003230: 080032e9 .word 0x080032e9 + 8003234: 080032e9 .word 0x080032e9 + 8003238: 0800324f .word 0x0800324f + 800323c: 080032b9 .word 0x080032b9 + case MOTO_STATE_NORMAL: + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_RESET); + 8003240: 2200 movs r2, #0 + 8003242: f44f 5100 mov.w r1, #8192 @ 0x2000 + 8003246: 481a ldr r0, [pc, #104] @ (80032b0 ) + 8003248: f001 f9f8 bl 800463c + break; + 800324c: e053 b.n 80032f6 + case MOTO_STATE_WARNING: + case MOTO_STATE_RAPID_TURN: + // Clignotement lent + if ((current_time / 500) % 2) { + 800324e: f8d7 30d4 ldr.w r3, [r7, #212] @ 0xd4 + 8003252: 4a18 ldr r2, [pc, #96] @ (80032b4 ) + 8003254: fba2 2303 umull r2, r3, r2, r3 + 8003258: 095b lsrs r3, r3, #5 + 800325a: f003 0301 and.w r3, r3, #1 + 800325e: 2b00 cmp r3, #0 + 8003260: d006 beq.n 8003270 + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_SET); + 8003262: 2201 movs r2, #1 + 8003264: f44f 5100 mov.w r1, #8192 @ 0x2000 + 8003268: 4811 ldr r0, [pc, #68] @ (80032b0 ) + 800326a: f001 f9e7 bl 800463c + } else { + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_RESET); + } + break; + 800326e: e042 b.n 80032f6 + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_RESET); + 8003270: 2200 movs r2, #0 + 8003272: f44f 5100 mov.w r1, #8192 @ 0x2000 + 8003276: 480e ldr r0, [pc, #56] @ (80032b0 ) + 8003278: f001 f9e0 bl 800463c + break; + 800327c: e03b b.n 80032f6 + 800327e: bf00 nop + 8003280: 0800b748 .word 0x0800b748 + 8003284: 200002cc .word 0x200002cc + 8003288: 0800b7a4 .word 0x0800b7a4 + 800328c: 20000340 .word 0x20000340 + 8003290: 447a0000 .word 0x447a0000 + 8003294: 3c23d70a .word 0x3c23d70a + 8003298: 3dcccccd .word 0x3dcccccd + 800329c: 2000038c .word 0x2000038c + 80032a0: 3f666666 .word 0x3f666666 + 80032a4: 20000390 .word 0x20000390 + 80032a8: 20000394 .word 0x20000394 + 80032ac: 20000364 .word 0x20000364 + 80032b0: 48000400 .word 0x48000400 + 80032b4: 10624dd3 .word 0x10624dd3 + case MOTO_STATE_DANGER: + case MOTO_STATE_POSSIBLE_CRASH: + // Clignotement rapide + if ((current_time / 100) % 2) { + 80032b8: f8d7 30d4 ldr.w r3, [r7, #212] @ 0xd4 + 80032bc: 4a3a ldr r2, [pc, #232] @ (80033a8 ) + 80032be: fba2 2303 umull r2, r3, r2, r3 + 80032c2: 095b lsrs r3, r3, #5 + 80032c4: f003 0301 and.w r3, r3, #1 + 80032c8: 2b00 cmp r3, #0 + 80032ca: d006 beq.n 80032da + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_SET); + 80032cc: 2201 movs r2, #1 + 80032ce: f44f 5100 mov.w r1, #8192 @ 0x2000 + 80032d2: 4836 ldr r0, [pc, #216] @ (80033ac ) + 80032d4: f001 f9b2 bl 800463c + } else { + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_RESET); + } + break; + 80032d8: e00d b.n 80032f6 + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_RESET); + 80032da: 2200 movs r2, #0 + 80032dc: f44f 5100 mov.w r1, #8192 @ 0x2000 + 80032e0: 4832 ldr r0, [pc, #200] @ (80033ac ) + 80032e2: f001 f9ab bl 800463c + break; + 80032e6: e006 b.n 80032f6 + default: + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_SET); + 80032e8: 2201 movs r2, #1 + 80032ea: f44f 5100 mov.w r1, #8192 @ 0x2000 + 80032ee: 482f ldr r0, [pc, #188] @ (80033ac ) + 80032f0: f001 f9a4 bl 800463c + break; + 80032f4: bf00 nop + } + + // Debug UART (toutes les 50 itérations = ~500ms) + static uint32_t uart_counter = 0; + uart_counter++; + 80032f6: 4b2e ldr r3, [pc, #184] @ (80033b0 ) + 80032f8: 681b ldr r3, [r3, #0] + 80032fa: 3301 adds r3, #1 + 80032fc: 4a2c ldr r2, [pc, #176] @ (80033b0 ) + 80032fe: 6013 str r3, [r2, #0] + if (uart_counter >= 50) { + 8003300: 4b2b ldr r3, [pc, #172] @ (80033b0 ) + 8003302: 681b ldr r3, [r3, #0] + 8003304: 2b31 cmp r3, #49 @ 0x31 + 8003306: d943 bls.n 8003390 + FusionAhrsInternalStates states = FusionAhrsGetInternalStates(&ahrs); + 8003308: f107 0314 add.w r3, r7, #20 + 800330c: 4929 ldr r1, [pc, #164] @ (80033b4 ) + 800330e: 4618 mov r0, r3 + 8003310: f7ff fa18 bl 8002744 + + printf("R:%.1f P:%.1f Y:%.1f | St:%s | AE:%.1f ME:%.1f | AI:%d MI:%d | Smp:%lu\r\n", + 8003314: f8d7 00cc ldr.w r0, [r7, #204] @ 0xcc + 8003318: f7fd f91e bl 8000558 <__aeabi_f2d> + 800331c: e9c7 0102 strd r0, r1, [r7, #8] + 8003320: f8d7 00c8 ldr.w r0, [r7, #200] @ 0xc8 + 8003324: f7fd f918 bl 8000558 <__aeabi_f2d> + 8003328: 4604 mov r4, r0 + 800332a: 460d mov r5, r1 + 800332c: f8d7 00c4 ldr.w r0, [r7, #196] @ 0xc4 + 8003330: f7fd f912 bl 8000558 <__aeabi_f2d> + 8003334: 4680 mov r8, r0 + 8003336: 4689 mov r9, r1 + 8003338: 4b1f ldr r3, [pc, #124] @ (80033b8 ) + 800333a: 7e1b ldrb r3, [r3, #24] + 800333c: 4618 mov r0, r3 + 800333e: f000 fa81 bl 8003844 + 8003342: 4606 mov r6, r0 + roll, pitch, yaw, + Moto_GetStateString(moto_data.state), + states.accelerationError, states.magneticError, + 8003344: 697b ldr r3, [r7, #20] + printf("R:%.1f P:%.1f Y:%.1f | St:%s | AE:%.1f ME:%.1f | AI:%d MI:%d | Smp:%lu\r\n", + 8003346: 4618 mov r0, r3 + 8003348: f7fd f906 bl 8000558 <__aeabi_f2d> + 800334c: 4682 mov sl, r0 + 800334e: 468b mov fp, r1 + states.accelerationError, states.magneticError, + 8003350: 6a3b ldr r3, [r7, #32] + printf("R:%.1f P:%.1f Y:%.1f | St:%s | AE:%.1f ME:%.1f | AI:%d MI:%d | Smp:%lu\r\n", + 8003352: 4618 mov r0, r3 + 8003354: f7fd f900 bl 8000558 <__aeabi_f2d> + states.accelerometerIgnored, states.magnetometerIgnored, + 8003358: 7e3b ldrb r3, [r7, #24] + printf("R:%.1f P:%.1f Y:%.1f | St:%s | AE:%.1f ME:%.1f | AI:%d MI:%d | Smp:%lu\r\n", + 800335a: 461a mov r2, r3 + states.accelerometerIgnored, states.magnetometerIgnored, + 800335c: f897 3024 ldrb.w r3, [r7, #36] @ 0x24 + printf("R:%.1f P:%.1f Y:%.1f | St:%s | AE:%.1f ME:%.1f | AI:%d MI:%d | Smp:%lu\r\n", + 8003360: 607b str r3, [r7, #4] + 8003362: 4b16 ldr r3, [pc, #88] @ (80033bc ) + 8003364: 69db ldr r3, [r3, #28] + 8003366: 930c str r3, [sp, #48] @ 0x30 + 8003368: 687b ldr r3, [r7, #4] + 800336a: 930b str r3, [sp, #44] @ 0x2c + 800336c: 920a str r2, [sp, #40] @ 0x28 + 800336e: e9cd 0108 strd r0, r1, [sp, #32] + 8003372: e9cd ab06 strd sl, fp, [sp, #24] + 8003376: 9604 str r6, [sp, #16] + 8003378: e9cd 8902 strd r8, r9, [sp, #8] + 800337c: e9cd 4500 strd r4, r5, [sp] + 8003380: e9d7 2302 ldrd r2, r3, [r7, #8] + 8003384: 480e ldr r0, [pc, #56] @ (80033c0 ) + 8003386: f004 fd37 bl 8007df8 + moto_stats.total_samples); + + uart_counter = 0; + 800338a: 4b09 ldr r3, [pc, #36] @ (80033b0 ) + 800338c: 2200 movs r2, #0 + 800338e: 601a str r2, [r3, #0] + } + + // Mise à jour du timestamp + moto_data.last_update_time = current_time; + 8003390: 4a09 ldr r2, [pc, #36] @ (80033b8 ) + 8003392: f8d7 30d4 ldr.w r3, [r7, #212] @ 0xd4 + 8003396: 6213 str r3, [r2, #32] + last_time = current_time; + 8003398: f8d7 30d4 ldr.w r3, [r7, #212] @ 0xd4 + 800339c: f8c7 30e4 str.w r3, [r7, #228] @ 0xe4 + } + + // Petite pause pour éviter la surcharge du processeur + HAL_Delay(20); + 80033a0: 2014 movs r0, #20 + 80033a2: f000 fec7 bl 8004134 + while (1) { + 80033a6: e5e9 b.n 8002f7c + 80033a8: 51eb851f .word 0x51eb851f + 80033ac: 48000400 .word 0x48000400 + 80033b0: 20000398 .word 0x20000398 + 80033b4: 200002cc .word 0x200002cc + 80033b8: 20000340 .word 0x20000340 + 80033bc: 20000364 .word 0x20000364 + 80033c0: 0800b758 .word 0x0800b758 + +080033c4 : + } +} + +void SystemClock_Config(void) +{ + 80033c4: b580 push {r7, lr} + 80033c6: b096 sub sp, #88 @ 0x58 + 80033c8: af00 add r7, sp, #0 + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + 80033ca: f107 0314 add.w r3, r7, #20 + 80033ce: 2244 movs r2, #68 @ 0x44 + 80033d0: 2100 movs r1, #0 + 80033d2: 4618 mov r0, r3 + 80033d4: f004 fd9b bl 8007f0e + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + 80033d8: 463b mov r3, r7 + 80033da: 2200 movs r2, #0 + 80033dc: 601a str r2, [r3, #0] + 80033de: 605a str r2, [r3, #4] + 80033e0: 609a str r2, [r3, #8] + 80033e2: 60da str r2, [r3, #12] + 80033e4: 611a str r2, [r3, #16] + + /** Configure the main internal regulator output voltage + */ + if (HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1) != HAL_OK) + 80033e6: f44f 7000 mov.w r0, #512 @ 0x200 + 80033ea: f002 f889 bl 8005500 + 80033ee: 4603 mov r3, r0 + 80033f0: 2b00 cmp r3, #0 + 80033f2: d001 beq.n 80033f8 + { + Error_Handler(); + 80033f4: f000 f932 bl 800365c + } + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + 80033f8: 2302 movs r3, #2 + 80033fa: 617b str r3, [r7, #20] + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + 80033fc: f44f 7380 mov.w r3, #256 @ 0x100 + 8003400: 623b str r3, [r7, #32] + RCC_OscInitStruct.HSICalibrationValue = 64; + 8003402: 2340 movs r3, #64 @ 0x40 + 8003404: 627b str r3, [r7, #36] @ 0x24 + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + 8003406: 2302 movs r3, #2 + 8003408: 63fb str r3, [r7, #60] @ 0x3c + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + 800340a: 2302 movs r3, #2 + 800340c: 643b str r3, [r7, #64] @ 0x40 + RCC_OscInitStruct.PLL.PLLM = 1; + 800340e: 2301 movs r3, #1 + 8003410: 647b str r3, [r7, #68] @ 0x44 + RCC_OscInitStruct.PLL.PLLN = 10; + 8003412: 230a movs r3, #10 + 8003414: 64bb str r3, [r7, #72] @ 0x48 + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV7; + 8003416: 2307 movs r3, #7 + 8003418: 64fb str r3, [r7, #76] @ 0x4c + RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; + 800341a: 2302 movs r3, #2 + 800341c: 653b str r3, [r7, #80] @ 0x50 + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; + 800341e: 2302 movs r3, #2 + 8003420: 657b str r3, [r7, #84] @ 0x54 + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + 8003422: f107 0314 add.w r3, r7, #20 + 8003426: 4618 mov r0, r3 + 8003428: f002 f8c0 bl 80055ac + 800342c: 4603 mov r3, r0 + 800342e: 2b00 cmp r3, #0 + 8003430: d001 beq.n 8003436 + { + Error_Handler(); + 8003432: f000 f913 bl 800365c + } + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + 8003436: 230f movs r3, #15 + 8003438: 603b str r3, [r7, #0] + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + 800343a: 2303 movs r3, #3 + 800343c: 607b str r3, [r7, #4] + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + 800343e: 2300 movs r3, #0 + 8003440: 60bb str r3, [r7, #8] + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + 8003442: 2300 movs r3, #0 + 8003444: 60fb str r3, [r7, #12] + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + 8003446: 2300 movs r3, #0 + 8003448: 613b str r3, [r7, #16] + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4) != HAL_OK) + 800344a: 463b mov r3, r7 + 800344c: 2104 movs r1, #4 + 800344e: 4618 mov r0, r3 + 8003450: f002 fcc0 bl 8005dd4 + 8003454: 4603 mov r3, r0 + 8003456: 2b00 cmp r3, #0 + 8003458: d001 beq.n 800345e + { + Error_Handler(); + 800345a: f000 f8ff bl 800365c + } +} + 800345e: bf00 nop + 8003460: 3758 adds r7, #88 @ 0x58 + 8003462: 46bd mov sp, r7 + 8003464: bd80 pop {r7, pc} + ... + +08003468 : + +static void MX_I2C1_Init(void) +{ + 8003468: b580 push {r7, lr} + 800346a: af00 add r7, sp, #0 + hi2c1.Instance = I2C1; + 800346c: 4b1b ldr r3, [pc, #108] @ (80034dc ) + 800346e: 4a1c ldr r2, [pc, #112] @ (80034e0 ) + 8003470: 601a str r2, [r3, #0] + hi2c1.Init.Timing = 0x10D19CE4; + 8003472: 4b1a ldr r3, [pc, #104] @ (80034dc ) + 8003474: 4a1b ldr r2, [pc, #108] @ (80034e4 ) + 8003476: 605a str r2, [r3, #4] + hi2c1.Init.OwnAddress1 = 0; + 8003478: 4b18 ldr r3, [pc, #96] @ (80034dc ) + 800347a: 2200 movs r2, #0 + 800347c: 609a str r2, [r3, #8] + hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; + 800347e: 4b17 ldr r3, [pc, #92] @ (80034dc ) + 8003480: 2201 movs r2, #1 + 8003482: 60da str r2, [r3, #12] + hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; + 8003484: 4b15 ldr r3, [pc, #84] @ (80034dc ) + 8003486: 2200 movs r2, #0 + 8003488: 611a str r2, [r3, #16] + hi2c1.Init.OwnAddress2 = 0; + 800348a: 4b14 ldr r3, [pc, #80] @ (80034dc ) + 800348c: 2200 movs r2, #0 + 800348e: 615a str r2, [r3, #20] + hi2c1.Init.OwnAddress2Masks = I2C_OA2_NOMASK; + 8003490: 4b12 ldr r3, [pc, #72] @ (80034dc ) + 8003492: 2200 movs r2, #0 + 8003494: 619a str r2, [r3, #24] + hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; + 8003496: 4b11 ldr r3, [pc, #68] @ (80034dc ) + 8003498: 2200 movs r2, #0 + 800349a: 61da str r2, [r3, #28] + hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE; + 800349c: 4b0f ldr r3, [pc, #60] @ (80034dc ) + 800349e: 2200 movs r2, #0 + 80034a0: 621a str r2, [r3, #32] + if (HAL_I2C_Init(&hi2c1) != HAL_OK) + 80034a2: 480e ldr r0, [pc, #56] @ (80034dc ) + 80034a4: f001 f8e2 bl 800466c + 80034a8: 4603 mov r3, r0 + 80034aa: 2b00 cmp r3, #0 + 80034ac: d001 beq.n 80034b2 + { + Error_Handler(); + 80034ae: f000 f8d5 bl 800365c + } + + if (HAL_I2CEx_ConfigAnalogFilter(&hi2c1, I2C_ANALOGFILTER_ENABLE) != HAL_OK) + 80034b2: 2100 movs r1, #0 + 80034b4: 4809 ldr r0, [pc, #36] @ (80034dc ) + 80034b6: f001 ff7d bl 80053b4 + 80034ba: 4603 mov r3, r0 + 80034bc: 2b00 cmp r3, #0 + 80034be: d001 beq.n 80034c4 + { + Error_Handler(); + 80034c0: f000 f8cc bl 800365c + } + + if (HAL_I2CEx_ConfigDigitalFilter(&hi2c1, 0) != HAL_OK) + 80034c4: 2100 movs r1, #0 + 80034c6: 4805 ldr r0, [pc, #20] @ (80034dc ) + 80034c8: f001 ffbf bl 800544a + 80034cc: 4603 mov r3, r0 + 80034ce: 2b00 cmp r3, #0 + 80034d0: d001 beq.n 80034d6 + { + Error_Handler(); + 80034d2: f000 f8c3 bl 800365c + } +} + 80034d6: bf00 nop + 80034d8: bd80 pop {r7, pc} + 80034da: bf00 nop + 80034dc: 200001f0 .word 0x200001f0 + 80034e0: 40005400 .word 0x40005400 + 80034e4: 10d19ce4 .word 0x10d19ce4 + +080034e8 : + +static void MX_USART2_UART_Init(void) +{ + 80034e8: b580 push {r7, lr} + 80034ea: af00 add r7, sp, #0 + huart2.Instance = USART2; + 80034ec: 4b14 ldr r3, [pc, #80] @ (8003540 ) + 80034ee: 4a15 ldr r2, [pc, #84] @ (8003544 ) + 80034f0: 601a str r2, [r3, #0] + huart2.Init.BaudRate = 115200; + 80034f2: 4b13 ldr r3, [pc, #76] @ (8003540 ) + 80034f4: f44f 32e1 mov.w r2, #115200 @ 0x1c200 + 80034f8: 605a str r2, [r3, #4] + huart2.Init.WordLength = UART_WORDLENGTH_8B; + 80034fa: 4b11 ldr r3, [pc, #68] @ (8003540 ) + 80034fc: 2200 movs r2, #0 + 80034fe: 609a str r2, [r3, #8] + huart2.Init.StopBits = UART_STOPBITS_1; + 8003500: 4b0f ldr r3, [pc, #60] @ (8003540 ) + 8003502: 2200 movs r2, #0 + 8003504: 60da str r2, [r3, #12] + huart2.Init.Parity = UART_PARITY_NONE; + 8003506: 4b0e ldr r3, [pc, #56] @ (8003540 ) + 8003508: 2200 movs r2, #0 + 800350a: 611a str r2, [r3, #16] + huart2.Init.Mode = UART_MODE_TX_RX; + 800350c: 4b0c ldr r3, [pc, #48] @ (8003540 ) + 800350e: 220c movs r2, #12 + 8003510: 615a str r2, [r3, #20] + huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE; + 8003512: 4b0b ldr r3, [pc, #44] @ (8003540 ) + 8003514: 2200 movs r2, #0 + 8003516: 619a str r2, [r3, #24] + huart2.Init.OverSampling = UART_OVERSAMPLING_16; + 8003518: 4b09 ldr r3, [pc, #36] @ (8003540 ) + 800351a: 2200 movs r2, #0 + 800351c: 61da str r2, [r3, #28] + huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + 800351e: 4b08 ldr r3, [pc, #32] @ (8003540 ) + 8003520: 2200 movs r2, #0 + 8003522: 621a str r2, [r3, #32] + huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + 8003524: 4b06 ldr r3, [pc, #24] @ (8003540 ) + 8003526: 2200 movs r2, #0 + 8003528: 625a str r2, [r3, #36] @ 0x24 + if (HAL_UART_Init(&huart2) != HAL_OK) + 800352a: 4805 ldr r0, [pc, #20] @ (8003540 ) + 800352c: f003 f9d4 bl 80068d8 + 8003530: 4603 mov r3, r0 + 8003532: 2b00 cmp r3, #0 + 8003534: d001 beq.n 800353a + { + Error_Handler(); + 8003536: f000 f891 bl 800365c + } +} + 800353a: bf00 nop + 800353c: bd80 pop {r7, pc} + 800353e: bf00 nop + 8003540: 20000244 .word 0x20000244 + 8003544: 40004400 .word 0x40004400 + +08003548 : + +static void MX_GPIO_Init(void) +{ + 8003548: b580 push {r7, lr} + 800354a: b08a sub sp, #40 @ 0x28 + 800354c: af00 add r7, sp, #0 + GPIO_InitTypeDef GPIO_InitStruct = {0}; + 800354e: f107 0314 add.w r3, r7, #20 + 8003552: 2200 movs r2, #0 + 8003554: 601a str r2, [r3, #0] + 8003556: 605a str r2, [r3, #4] + 8003558: 609a str r2, [r3, #8] + 800355a: 60da str r2, [r3, #12] + 800355c: 611a str r2, [r3, #16] + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOC_CLK_ENABLE(); + 800355e: 4b3c ldr r3, [pc, #240] @ (8003650 ) + 8003560: 6cdb ldr r3, [r3, #76] @ 0x4c + 8003562: 4a3b ldr r2, [pc, #236] @ (8003650 ) + 8003564: f043 0304 orr.w r3, r3, #4 + 8003568: 64d3 str r3, [r2, #76] @ 0x4c + 800356a: 4b39 ldr r3, [pc, #228] @ (8003650 ) + 800356c: 6cdb ldr r3, [r3, #76] @ 0x4c + 800356e: f003 0304 and.w r3, r3, #4 + 8003572: 613b str r3, [r7, #16] + 8003574: 693b ldr r3, [r7, #16] + __HAL_RCC_GPIOH_CLK_ENABLE(); + 8003576: 4b36 ldr r3, [pc, #216] @ (8003650 ) + 8003578: 6cdb ldr r3, [r3, #76] @ 0x4c + 800357a: 4a35 ldr r2, [pc, #212] @ (8003650 ) + 800357c: f043 0380 orr.w r3, r3, #128 @ 0x80 + 8003580: 64d3 str r3, [r2, #76] @ 0x4c + 8003582: 4b33 ldr r3, [pc, #204] @ (8003650 ) + 8003584: 6cdb ldr r3, [r3, #76] @ 0x4c + 8003586: f003 0380 and.w r3, r3, #128 @ 0x80 + 800358a: 60fb str r3, [r7, #12] + 800358c: 68fb ldr r3, [r7, #12] + __HAL_RCC_GPIOA_CLK_ENABLE(); + 800358e: 4b30 ldr r3, [pc, #192] @ (8003650 ) + 8003590: 6cdb ldr r3, [r3, #76] @ 0x4c + 8003592: 4a2f ldr r2, [pc, #188] @ (8003650 ) + 8003594: f043 0301 orr.w r3, r3, #1 + 8003598: 64d3 str r3, [r2, #76] @ 0x4c + 800359a: 4b2d ldr r3, [pc, #180] @ (8003650 ) + 800359c: 6cdb ldr r3, [r3, #76] @ 0x4c + 800359e: f003 0301 and.w r3, r3, #1 + 80035a2: 60bb str r3, [r7, #8] + 80035a4: 68bb ldr r3, [r7, #8] + __HAL_RCC_GPIOB_CLK_ENABLE(); + 80035a6: 4b2a ldr r3, [pc, #168] @ (8003650 ) + 80035a8: 6cdb ldr r3, [r3, #76] @ 0x4c + 80035aa: 4a29 ldr r2, [pc, #164] @ (8003650 ) + 80035ac: f043 0302 orr.w r3, r3, #2 + 80035b0: 64d3 str r3, [r2, #76] @ 0x4c + 80035b2: 4b27 ldr r3, [pc, #156] @ (8003650 ) + 80035b4: 6cdb ldr r3, [r3, #76] @ 0x4c + 80035b6: f003 0302 and.w r3, r3, #2 + 80035ba: 607b str r3, [r7, #4] + 80035bc: 687b ldr r3, [r7, #4] + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOA, SMPS_EN_Pin|SMPS_V1_Pin|SMPS_SW_Pin, GPIO_PIN_RESET); + 80035be: 2200 movs r2, #0 + 80035c0: 21b0 movs r1, #176 @ 0xb0 + 80035c2: f04f 4090 mov.w r0, #1207959552 @ 0x48000000 + 80035c6: f001 f839 bl 800463c + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(LD4_GPIO_Port, LD4_Pin, GPIO_PIN_RESET); + 80035ca: 2200 movs r2, #0 + 80035cc: f44f 5100 mov.w r1, #8192 @ 0x2000 + 80035d0: 4820 ldr r0, [pc, #128] @ (8003654 ) + 80035d2: f001 f833 bl 800463c + + /*Configure GPIO pin : B1_Pin */ + GPIO_InitStruct.Pin = B1_Pin; + 80035d6: f44f 5300 mov.w r3, #8192 @ 0x2000 + 80035da: 617b str r3, [r7, #20] + GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING; + 80035dc: f44f 1304 mov.w r3, #2162688 @ 0x210000 + 80035e0: 61bb str r3, [r7, #24] + GPIO_InitStruct.Pull = GPIO_NOPULL; + 80035e2: 2300 movs r3, #0 + 80035e4: 61fb str r3, [r7, #28] + HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct); + 80035e6: f107 0314 add.w r3, r7, #20 + 80035ea: 4619 mov r1, r3 + 80035ec: 481a ldr r0, [pc, #104] @ (8003658 ) + 80035ee: f000 feab bl 8004348 + + /*Configure GPIO pins : SMPS_EN_Pin SMPS_V1_Pin SMPS_SW_Pin */ + GPIO_InitStruct.Pin = SMPS_EN_Pin|SMPS_V1_Pin|SMPS_SW_Pin; + 80035f2: 23b0 movs r3, #176 @ 0xb0 + 80035f4: 617b str r3, [r7, #20] + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + 80035f6: 2301 movs r3, #1 + 80035f8: 61bb str r3, [r7, #24] + GPIO_InitStruct.Pull = GPIO_NOPULL; + 80035fa: 2300 movs r3, #0 + 80035fc: 61fb str r3, [r7, #28] + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + 80035fe: 2300 movs r3, #0 + 8003600: 623b str r3, [r7, #32] + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + 8003602: f107 0314 add.w r3, r7, #20 + 8003606: 4619 mov r1, r3 + 8003608: f04f 4090 mov.w r0, #1207959552 @ 0x48000000 + 800360c: f000 fe9c bl 8004348 + + /*Configure GPIO pin : SMPS_PG_Pin */ + GPIO_InitStruct.Pin = SMPS_PG_Pin; + 8003610: 2340 movs r3, #64 @ 0x40 + 8003612: 617b str r3, [r7, #20] + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + 8003614: 2300 movs r3, #0 + 8003616: 61bb str r3, [r7, #24] + GPIO_InitStruct.Pull = GPIO_PULLUP; + 8003618: 2301 movs r3, #1 + 800361a: 61fb str r3, [r7, #28] + HAL_GPIO_Init(SMPS_PG_GPIO_Port, &GPIO_InitStruct); + 800361c: f107 0314 add.w r3, r7, #20 + 8003620: 4619 mov r1, r3 + 8003622: f04f 4090 mov.w r0, #1207959552 @ 0x48000000 + 8003626: f000 fe8f bl 8004348 + + /*Configure GPIO pin : LD4_Pin */ + GPIO_InitStruct.Pin = LD4_Pin; + 800362a: f44f 5300 mov.w r3, #8192 @ 0x2000 + 800362e: 617b str r3, [r7, #20] + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + 8003630: 2301 movs r3, #1 + 8003632: 61bb str r3, [r7, #24] + GPIO_InitStruct.Pull = GPIO_NOPULL; + 8003634: 2300 movs r3, #0 + 8003636: 61fb str r3, [r7, #28] + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + 8003638: 2300 movs r3, #0 + 800363a: 623b str r3, [r7, #32] + HAL_GPIO_Init(LD4_GPIO_Port, &GPIO_InitStruct); + 800363c: f107 0314 add.w r3, r7, #20 + 8003640: 4619 mov r1, r3 + 8003642: 4804 ldr r0, [pc, #16] @ (8003654 ) + 8003644: f000 fe80 bl 8004348 +} + 8003648: bf00 nop + 800364a: 3728 adds r7, #40 @ 0x28 + 800364c: 46bd mov sp, r7 + 800364e: bd80 pop {r7, pc} + 8003650: 40021000 .word 0x40021000 + 8003654: 48000400 .word 0x48000400 + 8003658: 48000800 .word 0x48000800 + +0800365c : + +void Error_Handler(void) +{ + 800365c: b480 push {r7} + 800365e: af00 add r7, sp, #0 + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); + 8003660: b672 cpsid i +} + 8003662: bf00 nop + __disable_irq(); + while (1) + 8003664: bf00 nop + 8003666: e7fd b.n 8003664 + +08003668 : + +//------------------------------------------------------------------------------ +// Fonctions publiques +//------------------------------------------------------------------------------ + +void Moto_InitData(MotoData_t *data) { + 8003668: b580 push {r7, lr} + 800366a: b082 sub sp, #8 + 800366c: af00 add r7, sp, #0 + 800366e: 6078 str r0, [r7, #4] + memset(data, 0, sizeof(MotoData_t)); + 8003670: 2224 movs r2, #36 @ 0x24 + 8003672: 2100 movs r1, #0 + 8003674: 6878 ldr r0, [r7, #4] + 8003676: f004 fc4a bl 8007f0e + data->state = MOTO_STATE_NORMAL; + 800367a: 687b ldr r3, [r7, #4] + 800367c: 2200 movs r2, #0 + 800367e: 761a strb r2, [r3, #24] + data->is_initializing = true; + 8003680: 687b ldr r3, [r7, #4] + 8003682: 2201 movs r2, #1 + 8003684: 765a strb r2, [r3, #25] + data->last_update_time = 0; + 8003686: 687b ldr r3, [r7, #4] + 8003688: 2200 movs r2, #0 + 800368a: 621a str r2, [r3, #32] +} + 800368c: bf00 nop + 800368e: 3708 adds r7, #8 + 8003690: 46bd mov sp, r7 + 8003692: bd80 pop {r7, pc} + +08003694 : + +void Moto_UpdateState(MotoData_t *data, float roll, float pitch, float yaw, + float gyro_x, float gyro_y, float gyro_z) { + 8003694: b580 push {r7, lr} + 8003696: b08a sub sp, #40 @ 0x28 + 8003698: af00 add r7, sp, #0 + 800369a: 61f8 str r0, [r7, #28] + 800369c: ed87 0a06 vstr s0, [r7, #24] + 80036a0: edc7 0a05 vstr s1, [r7, #20] + 80036a4: ed87 1a04 vstr s2, [r7, #16] + 80036a8: edc7 1a03 vstr s3, [r7, #12] + 80036ac: ed87 2a02 vstr s4, [r7, #8] + 80036b0: edc7 2a01 vstr s5, [r7, #4] + + // Mise à jour des angles bruts + data->roll = roll; + 80036b4: 69fb ldr r3, [r7, #28] + 80036b6: 69ba ldr r2, [r7, #24] + 80036b8: 601a str r2, [r3, #0] + data->pitch = pitch; + 80036ba: 69fb ldr r3, [r7, #28] + 80036bc: 697a ldr r2, [r7, #20] + 80036be: 605a str r2, [r3, #4] + data->yaw = yaw; + 80036c0: 69fb ldr r3, [r7, #28] + 80036c2: 693a ldr r2, [r7, #16] + 80036c4: 609a str r2, [r3, #8] + + // Calcul de la magnitude de la vitesse angulaire + float gyro_magnitude = sqrtf(gyro_x*gyro_x + gyro_y*gyro_y + gyro_z*gyro_z); + 80036c6: edd7 7a03 vldr s15, [r7, #12] + 80036ca: ee27 7aa7 vmul.f32 s14, s15, s15 + 80036ce: edd7 7a02 vldr s15, [r7, #8] + 80036d2: ee67 7aa7 vmul.f32 s15, s15, s15 + 80036d6: ee37 7a27 vadd.f32 s14, s14, s15 + 80036da: edd7 7a01 vldr s15, [r7, #4] + 80036de: ee67 7aa7 vmul.f32 s15, s15, s15 + 80036e2: ee77 7a27 vadd.f32 s15, s14, s15 + 80036e6: eeb0 0a67 vmov.f32 s0, s15 + 80036ea: f006 fd65 bl 800a1b8 + 80036ee: ed87 0a09 vstr s0, [r7, #36] @ 0x24 + + // Détection d'état prioritaire : crash possible + if (Moto_DetectCrash(data, gyro_magnitude)) { + 80036f2: ed97 0a09 vldr s0, [r7, #36] @ 0x24 + 80036f6: 69f8 ldr r0, [r7, #28] + 80036f8: f000 f99e bl 8003a38 + 80036fc: 4603 mov r3, r0 + 80036fe: 2b00 cmp r3, #0 + 8003700: d003 beq.n 800370a + data->state = MOTO_STATE_POSSIBLE_CRASH; + 8003702: 69fb ldr r3, [r7, #28] + 8003704: 2206 movs r2, #6 + 8003706: 761a strb r2, [r3, #24] + return; + 8003708: e04c b.n 80037a4 + } + + // Détection de wheelie/stoppie + if (pitch > MOTO_PITCH_WHEELIE_THRESHOLD) { + 800370a: edd7 7a05 vldr s15, [r7, #20] + 800370e: eeb3 7a09 vmov.f32 s14, #57 @ 0x41c80000 25.0 + 8003712: eef4 7ac7 vcmpe.f32 s15, s14 + 8003716: eef1 fa10 vmrs APSR_nzcv, fpscr + 800371a: dd03 ble.n 8003724 + data->state = MOTO_STATE_WHEELIE; + 800371c: 69fb ldr r3, [r7, #28] + 800371e: 2203 movs r2, #3 + 8003720: 761a strb r2, [r3, #24] + 8003722: e03f b.n 80037a4 + } else if (pitch < MOTO_PITCH_STOPPIE_THRESHOLD) { + 8003724: edd7 7a05 vldr s15, [r7, #20] + 8003728: eebb 7a09 vmov.f32 s14, #185 @ 0xc1c80000 -25.0 + 800372c: eef4 7ac7 vcmpe.f32 s15, s14 + 8003730: eef1 fa10 vmrs APSR_nzcv, fpscr + 8003734: d503 bpl.n 800373e + data->state = MOTO_STATE_STOPPIE; + 8003736: 69fb ldr r3, [r7, #28] + 8003738: 2204 movs r2, #4 + 800373a: 761a strb r2, [r3, #24] + 800373c: e032 b.n 80037a4 + } + // Détection de virage rapide + else if (fabsf(gyro_z) > MOTO_GYRO_RAPID_TURN_THRESHOLD) { + 800373e: edd7 7a01 vldr s15, [r7, #4] + 8003742: eef0 7ae7 vabs.f32 s15, s15 + 8003746: ed9f 7a19 vldr s14, [pc, #100] @ 80037ac + 800374a: eef4 7ac7 vcmpe.f32 s15, s14 + 800374e: eef1 fa10 vmrs APSR_nzcv, fpscr + 8003752: dd03 ble.n 800375c + data->state = MOTO_STATE_RAPID_TURN; + 8003754: 69fb ldr r3, [r7, #28] + 8003756: 2205 movs r2, #5 + 8003758: 761a strb r2, [r3, #24] + 800375a: e023 b.n 80037a4 + } + // Détection d'inclinaison dangereuse + else if (fabsf(roll) > MOTO_ROLL_DANGER_THRESHOLD) { + 800375c: edd7 7a06 vldr s15, [r7, #24] + 8003760: eef0 7ae7 vabs.f32 s15, s15 + 8003764: ed9f 7a12 vldr s14, [pc, #72] @ 80037b0 + 8003768: eef4 7ac7 vcmpe.f32 s15, s14 + 800376c: eef1 fa10 vmrs APSR_nzcv, fpscr + 8003770: dd03 ble.n 800377a + data->state = MOTO_STATE_DANGER; + 8003772: 69fb ldr r3, [r7, #28] + 8003774: 2202 movs r2, #2 + 8003776: 761a strb r2, [r3, #24] + 8003778: e014 b.n 80037a4 + } + // Détection d'inclinaison d'avertissement + else if (fabsf(roll) > MOTO_ROLL_WARNING_THRESHOLD) { + 800377a: edd7 7a06 vldr s15, [r7, #24] + 800377e: eef0 7ae7 vabs.f32 s15, s15 + 8003782: eeb3 7a04 vmov.f32 s14, #52 @ 0x41a00000 20.0 + 8003786: eef4 7ac7 vcmpe.f32 s15, s14 + 800378a: eef1 fa10 vmrs APSR_nzcv, fpscr + 800378e: dd03 ble.n 8003798 + data->state = MOTO_STATE_WARNING; + 8003790: 69fb ldr r3, [r7, #28] + 8003792: 2201 movs r2, #1 + 8003794: 761a strb r2, [r3, #24] + 8003796: e005 b.n 80037a4 + } + // État normal + else { + data->state = MOTO_STATE_NORMAL; + 8003798: 69fb ldr r3, [r7, #28] + 800379a: 2200 movs r2, #0 + 800379c: 761a strb r2, [r3, #24] + data->crash_detect_counter = 0; // Reset compteur crash + 800379e: 69fb ldr r3, [r7, #28] + 80037a0: 2200 movs r2, #0 + 80037a2: 61da str r2, [r3, #28] + } +} + 80037a4: 3728 adds r7, #40 @ 0x28 + 80037a6: 46bd mov sp, r7 + 80037a8: bd80 pop {r7, pc} + 80037aa: bf00 nop + 80037ac: 42c80000 .word 0x42c80000 + 80037b0: 420c0000 .word 0x420c0000 + +080037b4 : + +void Moto_FilterAngles(MotoData_t *data) { + 80037b4: b480 push {r7} + 80037b6: b083 sub sp, #12 + 80037b8: af00 add r7, sp, #0 + 80037ba: 6078 str r0, [r7, #4] + // Filtre passe-bas simple pour lisser l'affichage + data->roll_filtered = MOTO_ANGLE_FILTER_ALPHA * data->roll + + 80037bc: 687b ldr r3, [r7, #4] + 80037be: edd3 7a00 vldr s15, [r3] + 80037c2: ed9f 7a1e vldr s14, [pc, #120] @ 800383c + 80037c6: ee27 7a87 vmul.f32 s14, s15, s14 + (1.0f - MOTO_ANGLE_FILTER_ALPHA) * data->roll_filtered; + 80037ca: 687b ldr r3, [r7, #4] + 80037cc: edd3 7a03 vldr s15, [r3, #12] + 80037d0: eddf 6a1b vldr s13, [pc, #108] @ 8003840 + 80037d4: ee67 7aa6 vmul.f32 s15, s15, s13 + data->roll_filtered = MOTO_ANGLE_FILTER_ALPHA * data->roll + + 80037d8: ee77 7a27 vadd.f32 s15, s14, s15 + 80037dc: 687b ldr r3, [r7, #4] + 80037de: edc3 7a03 vstr s15, [r3, #12] + + data->pitch_filtered = MOTO_ANGLE_FILTER_ALPHA * data->pitch + + 80037e2: 687b ldr r3, [r7, #4] + 80037e4: edd3 7a01 vldr s15, [r3, #4] + 80037e8: ed9f 7a14 vldr s14, [pc, #80] @ 800383c + 80037ec: ee27 7a87 vmul.f32 s14, s15, s14 + (1.0f - MOTO_ANGLE_FILTER_ALPHA) * data->pitch_filtered; + 80037f0: 687b ldr r3, [r7, #4] + 80037f2: edd3 7a04 vldr s15, [r3, #16] + 80037f6: eddf 6a12 vldr s13, [pc, #72] @ 8003840 + 80037fa: ee67 7aa6 vmul.f32 s15, s15, s13 + data->pitch_filtered = MOTO_ANGLE_FILTER_ALPHA * data->pitch + + 80037fe: ee77 7a27 vadd.f32 s15, s14, s15 + 8003802: 687b ldr r3, [r7, #4] + 8003804: edc3 7a04 vstr s15, [r3, #16] + + data->yaw_filtered = MOTO_ANGLE_FILTER_ALPHA * data->yaw + + 8003808: 687b ldr r3, [r7, #4] + 800380a: edd3 7a02 vldr s15, [r3, #8] + 800380e: ed9f 7a0b vldr s14, [pc, #44] @ 800383c + 8003812: ee27 7a87 vmul.f32 s14, s15, s14 + (1.0f - MOTO_ANGLE_FILTER_ALPHA) * data->yaw_filtered; + 8003816: 687b ldr r3, [r7, #4] + 8003818: edd3 7a05 vldr s15, [r3, #20] + 800381c: eddf 6a08 vldr s13, [pc, #32] @ 8003840 + 8003820: ee67 7aa6 vmul.f32 s15, s15, s13 + data->yaw_filtered = MOTO_ANGLE_FILTER_ALPHA * data->yaw + + 8003824: ee77 7a27 vadd.f32 s15, s14, s15 + 8003828: 687b ldr r3, [r7, #4] + 800382a: edc3 7a05 vstr s15, [r3, #20] +} + 800382e: bf00 nop + 8003830: 370c adds r7, #12 + 8003832: 46bd mov sp, r7 + 8003834: f85d 7b04 ldr.w r7, [sp], #4 + 8003838: 4770 bx lr + 800383a: bf00 nop + 800383c: 3e4ccccd .word 0x3e4ccccd + 8003840: 3f4ccccd .word 0x3f4ccccd + +08003844 : + +const char* Moto_GetStateString(MotoState_t state) { + 8003844: b480 push {r7} + 8003846: b083 sub sp, #12 + 8003848: af00 add r7, sp, #0 + 800384a: 4603 mov r3, r0 + 800384c: 71fb strb r3, [r7, #7] + switch (state) { + 800384e: 79fb ldrb r3, [r7, #7] + 8003850: 2b06 cmp r3, #6 + 8003852: d81f bhi.n 8003894 + 8003854: a201 add r2, pc, #4 @ (adr r2, 800385c ) + 8003856: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 800385a: bf00 nop + 800385c: 08003879 .word 0x08003879 + 8003860: 0800387d .word 0x0800387d + 8003864: 08003881 .word 0x08003881 + 8003868: 08003885 .word 0x08003885 + 800386c: 08003889 .word 0x08003889 + 8003870: 0800388d .word 0x0800388d + 8003874: 08003891 .word 0x08003891 + case MOTO_STATE_NORMAL: return "NORMAL"; + 8003878: 4b0a ldr r3, [pc, #40] @ (80038a4 ) + 800387a: e00c b.n 8003896 + case MOTO_STATE_WARNING: return "ATTENTION"; + 800387c: 4b0a ldr r3, [pc, #40] @ (80038a8 ) + 800387e: e00a b.n 8003896 + case MOTO_STATE_DANGER: return "DANGER"; + 8003880: 4b0a ldr r3, [pc, #40] @ (80038ac ) + 8003882: e008 b.n 8003896 + case MOTO_STATE_WHEELIE: return "WHEELIE"; + 8003884: 4b0a ldr r3, [pc, #40] @ (80038b0 ) + 8003886: e006 b.n 8003896 + case MOTO_STATE_STOPPIE: return "STOPPIE"; + 8003888: 4b0a ldr r3, [pc, #40] @ (80038b4 ) + 800388a: e004 b.n 8003896 + case MOTO_STATE_RAPID_TURN: return "VIRAGE RAPIDE"; + 800388c: 4b0a ldr r3, [pc, #40] @ (80038b8 ) + 800388e: e002 b.n 8003896 + case MOTO_STATE_POSSIBLE_CRASH: return "CHUTE POSSIBLE"; + 8003890: 4b0a ldr r3, [pc, #40] @ (80038bc ) + 8003892: e000 b.n 8003896 + default: return "INCONNU"; + 8003894: 4b0a ldr r3, [pc, #40] @ (80038c0 ) + } +} + 8003896: 4618 mov r0, r3 + 8003898: 370c adds r7, #12 + 800389a: 46bd mov sp, r7 + 800389c: f85d 7b04 ldr.w r7, [sp], #4 + 80038a0: 4770 bx lr + 80038a2: bf00 nop + 80038a4: 0800b7bc .word 0x0800b7bc + 80038a8: 0800b7c4 .word 0x0800b7c4 + 80038ac: 0800b7d0 .word 0x0800b7d0 + 80038b0: 0800b7d8 .word 0x0800b7d8 + 80038b4: 0800b7e0 .word 0x0800b7e0 + 80038b8: 0800b7e8 .word 0x0800b7e8 + 80038bc: 0800b7f8 .word 0x0800b7f8 + 80038c0: 0800b808 .word 0x0800b808 + +080038c4 : + +void Moto_UpdateStats(MotoStats_t *stats, const MotoData_t *data, + float gyro_x, float gyro_y, float gyro_z) { + 80038c4: b480 push {r7} + 80038c6: b087 sub sp, #28 + 80038c8: af00 add r7, sp, #0 + 80038ca: 6178 str r0, [r7, #20] + 80038cc: 6139 str r1, [r7, #16] + 80038ce: ed87 0a03 vstr s0, [r7, #12] + 80038d2: edc7 0a02 vstr s1, [r7, #8] + 80038d6: ed87 1a01 vstr s2, [r7, #4] + + stats->total_samples++; + 80038da: 697b ldr r3, [r7, #20] + 80038dc: 69db ldr r3, [r3, #28] + 80038de: 1c5a adds r2, r3, #1 + 80038e0: 697b ldr r3, [r7, #20] + 80038e2: 61da str r2, [r3, #28] + + // Mise à jour des extremums d'angles + if (data->roll > stats->max_roll) stats->max_roll = data->roll; + 80038e4: 693b ldr r3, [r7, #16] + 80038e6: ed93 7a00 vldr s14, [r3] + 80038ea: 697b ldr r3, [r7, #20] + 80038ec: edd3 7a00 vldr s15, [r3] + 80038f0: eeb4 7ae7 vcmpe.f32 s14, s15 + 80038f4: eef1 fa10 vmrs APSR_nzcv, fpscr + 80038f8: dd03 ble.n 8003902 + 80038fa: 693b ldr r3, [r7, #16] + 80038fc: 681a ldr r2, [r3, #0] + 80038fe: 697b ldr r3, [r7, #20] + 8003900: 601a str r2, [r3, #0] + if (data->roll < stats->min_roll) stats->min_roll = data->roll; + 8003902: 693b ldr r3, [r7, #16] + 8003904: ed93 7a00 vldr s14, [r3] + 8003908: 697b ldr r3, [r7, #20] + 800390a: edd3 7a01 vldr s15, [r3, #4] + 800390e: eeb4 7ae7 vcmpe.f32 s14, s15 + 8003912: eef1 fa10 vmrs APSR_nzcv, fpscr + 8003916: d503 bpl.n 8003920 + 8003918: 693b ldr r3, [r7, #16] + 800391a: 681a ldr r2, [r3, #0] + 800391c: 697b ldr r3, [r7, #20] + 800391e: 605a str r2, [r3, #4] + if (data->pitch > stats->max_pitch) stats->max_pitch = data->pitch; + 8003920: 693b ldr r3, [r7, #16] + 8003922: ed93 7a01 vldr s14, [r3, #4] + 8003926: 697b ldr r3, [r7, #20] + 8003928: edd3 7a02 vldr s15, [r3, #8] + 800392c: eeb4 7ae7 vcmpe.f32 s14, s15 + 8003930: eef1 fa10 vmrs APSR_nzcv, fpscr + 8003934: dd03 ble.n 800393e + 8003936: 693b ldr r3, [r7, #16] + 8003938: 685a ldr r2, [r3, #4] + 800393a: 697b ldr r3, [r7, #20] + 800393c: 609a str r2, [r3, #8] + if (data->pitch < stats->min_pitch) stats->min_pitch = data->pitch; + 800393e: 693b ldr r3, [r7, #16] + 8003940: ed93 7a01 vldr s14, [r3, #4] + 8003944: 697b ldr r3, [r7, #20] + 8003946: edd3 7a03 vldr s15, [r3, #12] + 800394a: eeb4 7ae7 vcmpe.f32 s14, s15 + 800394e: eef1 fa10 vmrs APSR_nzcv, fpscr + 8003952: d503 bpl.n 800395c + 8003954: 693b ldr r3, [r7, #16] + 8003956: 685a ldr r2, [r3, #4] + 8003958: 697b ldr r3, [r7, #20] + 800395a: 60da str r2, [r3, #12] + + // Mise à jour des extremums de vitesse angulaire + if (fabsf(gyro_x) > stats->max_gyro_x) stats->max_gyro_x = fabsf(gyro_x); + 800395c: edd7 7a03 vldr s15, [r7, #12] + 8003960: eeb0 7ae7 vabs.f32 s14, s15 + 8003964: 697b ldr r3, [r7, #20] + 8003966: edd3 7a04 vldr s15, [r3, #16] + 800396a: eeb4 7ae7 vcmpe.f32 s14, s15 + 800396e: eef1 fa10 vmrs APSR_nzcv, fpscr + 8003972: dd06 ble.n 8003982 + 8003974: edd7 7a03 vldr s15, [r7, #12] + 8003978: eef0 7ae7 vabs.f32 s15, s15 + 800397c: 697b ldr r3, [r7, #20] + 800397e: edc3 7a04 vstr s15, [r3, #16] + if (fabsf(gyro_y) > stats->max_gyro_y) stats->max_gyro_y = fabsf(gyro_y); + 8003982: edd7 7a02 vldr s15, [r7, #8] + 8003986: eeb0 7ae7 vabs.f32 s14, s15 + 800398a: 697b ldr r3, [r7, #20] + 800398c: edd3 7a05 vldr s15, [r3, #20] + 8003990: eeb4 7ae7 vcmpe.f32 s14, s15 + 8003994: eef1 fa10 vmrs APSR_nzcv, fpscr + 8003998: dd06 ble.n 80039a8 + 800399a: edd7 7a02 vldr s15, [r7, #8] + 800399e: eef0 7ae7 vabs.f32 s15, s15 + 80039a2: 697b ldr r3, [r7, #20] + 80039a4: edc3 7a05 vstr s15, [r3, #20] + if (fabsf(gyro_z) > stats->max_gyro_z) stats->max_gyro_z = fabsf(gyro_z); + 80039a8: edd7 7a01 vldr s15, [r7, #4] + 80039ac: eeb0 7ae7 vabs.f32 s14, s15 + 80039b0: 697b ldr r3, [r7, #20] + 80039b2: edd3 7a06 vldr s15, [r3, #24] + 80039b6: eeb4 7ae7 vcmpe.f32 s14, s15 + 80039ba: eef1 fa10 vmrs APSR_nzcv, fpscr + 80039be: dd06 ble.n 80039ce + 80039c0: edd7 7a01 vldr s15, [r7, #4] + 80039c4: eef0 7ae7 vabs.f32 s15, s15 + 80039c8: 697b ldr r3, [r7, #20] + 80039ca: edc3 7a06 vstr s15, [r3, #24] + + // Comptage des états d'alerte + if (data->state == MOTO_STATE_WARNING) stats->warning_count++; + 80039ce: 693b ldr r3, [r7, #16] + 80039d0: 7e1b ldrb r3, [r3, #24] + 80039d2: 2b01 cmp r3, #1 + 80039d4: d104 bne.n 80039e0 + 80039d6: 697b ldr r3, [r7, #20] + 80039d8: 6a1b ldr r3, [r3, #32] + 80039da: 1c5a adds r2, r3, #1 + 80039dc: 697b ldr r3, [r7, #20] + 80039de: 621a str r2, [r3, #32] + if (data->state == MOTO_STATE_DANGER || + 80039e0: 693b ldr r3, [r7, #16] + 80039e2: 7e1b ldrb r3, [r3, #24] + 80039e4: 2b02 cmp r3, #2 + 80039e6: d003 beq.n 80039f0 + data->state == MOTO_STATE_POSSIBLE_CRASH) stats->danger_count++; + 80039e8: 693b ldr r3, [r7, #16] + 80039ea: 7e1b ldrb r3, [r3, #24] + if (data->state == MOTO_STATE_DANGER || + 80039ec: 2b06 cmp r3, #6 + 80039ee: d104 bne.n 80039fa + data->state == MOTO_STATE_POSSIBLE_CRASH) stats->danger_count++; + 80039f0: 697b ldr r3, [r7, #20] + 80039f2: 6a5b ldr r3, [r3, #36] @ 0x24 + 80039f4: 1c5a adds r2, r3, #1 + 80039f6: 697b ldr r3, [r7, #20] + 80039f8: 625a str r2, [r3, #36] @ 0x24 +} + 80039fa: bf00 nop + 80039fc: 371c adds r7, #28 + 80039fe: 46bd mov sp, r7 + 8003a00: f85d 7b04 ldr.w r7, [sp], #4 + 8003a04: 4770 bx lr + +08003a06 : + +void Moto_CalibrateMagnetometer(float *mx, float *my, float *mz) { + 8003a06: b480 push {r7} + 8003a08: b085 sub sp, #20 + 8003a0a: af00 add r7, sp, #0 + 8003a0c: 60f8 str r0, [r7, #12] + 8003a0e: 60b9 str r1, [r7, #8] + 8003a10: 607a str r2, [r7, #4] + // Application des offsets et facteurs d'échelle + *mx = (*mx - MOTO_MAG_OFFSET_X) * MOTO_MAG_SCALE_X; + 8003a12: 68fb ldr r3, [r7, #12] + 8003a14: 681a ldr r2, [r3, #0] + 8003a16: 68fb ldr r3, [r7, #12] + 8003a18: 601a str r2, [r3, #0] + *my = (*my - MOTO_MAG_OFFSET_Y) * MOTO_MAG_SCALE_Y; + 8003a1a: 68bb ldr r3, [r7, #8] + 8003a1c: 681a ldr r2, [r3, #0] + 8003a1e: 68bb ldr r3, [r7, #8] + 8003a20: 601a str r2, [r3, #0] + *mz = (*mz - MOTO_MAG_OFFSET_Z) * MOTO_MAG_SCALE_Z; + 8003a22: 687b ldr r3, [r7, #4] + 8003a24: 681a ldr r2, [r3, #0] + 8003a26: 687b ldr r3, [r7, #4] + 8003a28: 601a str r2, [r3, #0] +} + 8003a2a: bf00 nop + 8003a2c: 3714 adds r7, #20 + 8003a2e: 46bd mov sp, r7 + 8003a30: f85d 7b04 ldr.w r7, [sp], #4 + 8003a34: 4770 bx lr + ... + +08003a38 : + +bool Moto_DetectCrash(MotoData_t *data, float gyro_magnitude) { + 8003a38: b480 push {r7} + 8003a3a: b083 sub sp, #12 + 8003a3c: af00 add r7, sp, #0 + 8003a3e: 6078 str r0, [r7, #4] + 8003a40: ed87 0a00 vstr s0, [r7] + if (gyro_magnitude > MOTO_GYRO_CRASH_THRESHOLD) { + 8003a44: edd7 7a00 vldr s15, [r7] + 8003a48: ed9f 7a10 vldr s14, [pc, #64] @ 8003a8c + 8003a4c: eef4 7ac7 vcmpe.f32 s15, s14 + 8003a50: eef1 fa10 vmrs APSR_nzcv, fpscr + 8003a54: dd0a ble.n 8003a6c + data->crash_detect_counter++; + 8003a56: 687b ldr r3, [r7, #4] + 8003a58: 69db ldr r3, [r3, #28] + 8003a5a: 1c5a adds r2, r3, #1 + 8003a5c: 687b ldr r3, [r7, #4] + 8003a5e: 61da str r2, [r3, #28] + + // Confirme la chute si seuil dépassé pendant plusieurs échantillons + if (data->crash_detect_counter > 5) { // ~50ms à 100Hz + 8003a60: 687b ldr r3, [r7, #4] + 8003a62: 69db ldr r3, [r3, #28] + 8003a64: 2b05 cmp r3, #5 + 8003a66: d90a bls.n 8003a7e + return true; + 8003a68: 2301 movs r3, #1 + 8003a6a: e009 b.n 8003a80 + } + } else { + // Décrémente progressivement le compteur + if (data->crash_detect_counter > 0) { + 8003a6c: 687b ldr r3, [r7, #4] + 8003a6e: 69db ldr r3, [r3, #28] + 8003a70: 2b00 cmp r3, #0 + 8003a72: d004 beq.n 8003a7e + data->crash_detect_counter--; + 8003a74: 687b ldr r3, [r7, #4] + 8003a76: 69db ldr r3, [r3, #28] + 8003a78: 1e5a subs r2, r3, #1 + 8003a7a: 687b ldr r3, [r7, #4] + 8003a7c: 61da str r2, [r3, #28] + } + } + + return false; + 8003a7e: 2300 movs r3, #0 +} + 8003a80: 4618 mov r0, r3 + 8003a82: 370c adds r7, #12 + 8003a84: 46bd mov sp, r7 + 8003a86: f85d 7b04 ldr.w r7, [sp], #4 + 8003a8a: 4770 bx lr + 8003a8c: 43960000 .word 0x43960000 + +08003a90 : + +void Moto_FormatDisplay(const MotoData_t *data, int line, char *buffer) { + 8003a90: b5b0 push {r4, r5, r7, lr} + 8003a92: b088 sub sp, #32 + 8003a94: af04 add r7, sp, #16 + 8003a96: 60f8 str r0, [r7, #12] + 8003a98: 60b9 str r1, [r7, #8] + 8003a9a: 607a str r2, [r7, #4] + switch (line) { + 8003a9c: 68bb ldr r3, [r7, #8] + 8003a9e: 2b03 cmp r3, #3 + 8003aa0: f200 8097 bhi.w 8003bd2 + 8003aa4: a201 add r2, pc, #4 @ (adr r2, 8003aac ) + 8003aa6: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 8003aaa: bf00 nop + 8003aac: 08003abd .word 0x08003abd + 8003ab0: 08003aed .word 0x08003aed + 8003ab4: 08003b0b .word 0x08003b0b + 8003ab8: 08003b23 .word 0x08003b23 + case 0: + snprintf(buffer, 21, "R:%5.1f P:%5.1f", + data->roll_filtered, data->pitch_filtered); + 8003abc: 68fb ldr r3, [r7, #12] + 8003abe: 68db ldr r3, [r3, #12] + snprintf(buffer, 21, "R:%5.1f P:%5.1f", + 8003ac0: 4618 mov r0, r3 + 8003ac2: f7fc fd49 bl 8000558 <__aeabi_f2d> + 8003ac6: 4604 mov r4, r0 + 8003ac8: 460d mov r5, r1 + data->roll_filtered, data->pitch_filtered); + 8003aca: 68fb ldr r3, [r7, #12] + 8003acc: 691b ldr r3, [r3, #16] + snprintf(buffer, 21, "R:%5.1f P:%5.1f", + 8003ace: 4618 mov r0, r3 + 8003ad0: f7fc fd42 bl 8000558 <__aeabi_f2d> + 8003ad4: 4602 mov r2, r0 + 8003ad6: 460b mov r3, r1 + 8003ad8: e9cd 2302 strd r2, r3, [sp, #8] + 8003adc: e9cd 4500 strd r4, r5, [sp] + 8003ae0: 4a41 ldr r2, [pc, #260] @ (8003be8 ) + 8003ae2: 2115 movs r1, #21 + 8003ae4: 6878 ldr r0, [r7, #4] + 8003ae6: f004 f999 bl 8007e1c + break; + 8003aea: e078 b.n 8003bde + + case 1: + snprintf(buffer, 21, "Yaw: %6.1f deg", data->yaw_filtered); + 8003aec: 68fb ldr r3, [r7, #12] + 8003aee: 695b ldr r3, [r3, #20] + 8003af0: 4618 mov r0, r3 + 8003af2: f7fc fd31 bl 8000558 <__aeabi_f2d> + 8003af6: 4602 mov r2, r0 + 8003af8: 460b mov r3, r1 + 8003afa: e9cd 2300 strd r2, r3, [sp] + 8003afe: 4a3b ldr r2, [pc, #236] @ (8003bec ) + 8003b00: 2115 movs r1, #21 + 8003b02: 6878 ldr r0, [r7, #4] + 8003b04: f004 f98a bl 8007e1c + break; + 8003b08: e069 b.n 8003bde + + case 2: + snprintf(buffer, 21, "Etat: %s", Moto_GetStateString(data->state)); + 8003b0a: 68fb ldr r3, [r7, #12] + 8003b0c: 7e1b ldrb r3, [r3, #24] + 8003b0e: 4618 mov r0, r3 + 8003b10: f7ff fe98 bl 8003844 + 8003b14: 4603 mov r3, r0 + 8003b16: 4a36 ldr r2, [pc, #216] @ (8003bf0 ) + 8003b18: 2115 movs r1, #21 + 8003b1a: 6878 ldr r0, [r7, #4] + 8003b1c: f004 f97e bl 8007e1c + break; + 8003b20: e05d b.n 8003bde + + case 3: + if (data->is_initializing) { + 8003b22: 68fb ldr r3, [r7, #12] + 8003b24: 7e5b ldrb r3, [r3, #25] + 8003b26: 2b00 cmp r3, #0 + 8003b28: d005 beq.n 8003b36 + snprintf(buffer, 21, "--- INIT EN COURS ---"); + 8003b2a: 4a32 ldr r2, [pc, #200] @ (8003bf4 ) + 8003b2c: 2115 movs r1, #21 + 8003b2e: 6878 ldr r0, [r7, #4] + 8003b30: f004 f974 bl 8007e1c + default: + snprintf(buffer, 21, "--- INCONNU ---"); + break; + } + } + break; + 8003b34: e053 b.n 8003bde + switch (data->state) { + 8003b36: 68fb ldr r3, [r7, #12] + 8003b38: 7e1b ldrb r3, [r3, #24] + 8003b3a: 2b06 cmp r3, #6 + 8003b3c: d842 bhi.n 8003bc4 + 8003b3e: a201 add r2, pc, #4 @ (adr r2, 8003b44 ) + 8003b40: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 8003b44: 08003b61 .word 0x08003b61 + 8003b48: 08003b6d .word 0x08003b6d + 8003b4c: 08003b95 .word 0x08003b95 + 8003b50: 08003ba1 .word 0x08003ba1 + 8003b54: 08003bad .word 0x08003bad + 8003b58: 08003bb9 .word 0x08003bb9 + 8003b5c: 08003b95 .word 0x08003b95 + snprintf(buffer, 21, "--- EQUILIBRE ---"); + 8003b60: 4a25 ldr r2, [pc, #148] @ (8003bf8 ) + 8003b62: 2115 movs r1, #21 + 8003b64: 6878 ldr r0, [r7, #4] + 8003b66: f004 f959 bl 8007e1c + break; + 8003b6a: e031 b.n 8003bd0 + if (data->roll > 0) { + 8003b6c: 68fb ldr r3, [r7, #12] + 8003b6e: edd3 7a00 vldr s15, [r3] + 8003b72: eef5 7ac0 vcmpe.f32 s15, #0.0 + 8003b76: eef1 fa10 vmrs APSR_nzcv, fpscr + 8003b7a: dd05 ble.n 8003b88 + snprintf(buffer, 21, "INCLIN. DROITE >>>"); + 8003b7c: 4a1f ldr r2, [pc, #124] @ (8003bfc ) + 8003b7e: 2115 movs r1, #21 + 8003b80: 6878 ldr r0, [r7, #4] + 8003b82: f004 f94b bl 8007e1c + break; + 8003b86: e023 b.n 8003bd0 + snprintf(buffer, 21, "<<< INCLIN. GAUCHE"); + 8003b88: 4a1d ldr r2, [pc, #116] @ (8003c00 ) + 8003b8a: 2115 movs r1, #21 + 8003b8c: 6878 ldr r0, [r7, #4] + 8003b8e: f004 f945 bl 8007e1c + break; + 8003b92: e01d b.n 8003bd0 + snprintf(buffer, 21, "!!! ATTENTION !!!"); + 8003b94: 4a1b ldr r2, [pc, #108] @ (8003c04 ) + 8003b96: 2115 movs r1, #21 + 8003b98: 6878 ldr r0, [r7, #4] + 8003b9a: f004 f93f bl 8007e1c + break; + 8003b9e: e017 b.n 8003bd0 + snprintf(buffer, 21, "^^^ WHEELIE ^^^"); + 8003ba0: 4a19 ldr r2, [pc, #100] @ (8003c08 ) + 8003ba2: 2115 movs r1, #21 + 8003ba4: 6878 ldr r0, [r7, #4] + 8003ba6: f004 f939 bl 8007e1c + break; + 8003baa: e011 b.n 8003bd0 + snprintf(buffer, 21, "vvv STOPPIE vvv"); + 8003bac: 4a17 ldr r2, [pc, #92] @ (8003c0c ) + 8003bae: 2115 movs r1, #21 + 8003bb0: 6878 ldr r0, [r7, #4] + 8003bb2: f004 f933 bl 8007e1c + break; + 8003bb6: e00b b.n 8003bd0 + snprintf(buffer, 21, ">>> VIRAGE <<<"); + 8003bb8: 4a15 ldr r2, [pc, #84] @ (8003c10 ) + 8003bba: 2115 movs r1, #21 + 8003bbc: 6878 ldr r0, [r7, #4] + 8003bbe: f004 f92d bl 8007e1c + break; + 8003bc2: e005 b.n 8003bd0 + snprintf(buffer, 21, "--- INCONNU ---"); + 8003bc4: 4a13 ldr r2, [pc, #76] @ (8003c14 ) + 8003bc6: 2115 movs r1, #21 + 8003bc8: 6878 ldr r0, [r7, #4] + 8003bca: f004 f927 bl 8007e1c + break; + 8003bce: bf00 nop + break; + 8003bd0: e005 b.n 8003bde + + default: + snprintf(buffer, 21, "Ligne invalide"); + 8003bd2: 4a11 ldr r2, [pc, #68] @ (8003c18 ) + 8003bd4: 2115 movs r1, #21 + 8003bd6: 6878 ldr r0, [r7, #4] + 8003bd8: f004 f920 bl 8007e1c + break; + 8003bdc: bf00 nop + } +} + 8003bde: bf00 nop + 8003be0: 3710 adds r7, #16 + 8003be2: 46bd mov sp, r7 + 8003be4: bdb0 pop {r4, r5, r7, pc} + 8003be6: bf00 nop + 8003be8: 0800b810 .word 0x0800b810 + 8003bec: 0800b820 .word 0x0800b820 + 8003bf0: 0800b830 .word 0x0800b830 + 8003bf4: 0800b83c .word 0x0800b83c + 8003bf8: 0800b854 .word 0x0800b854 + 8003bfc: 0800b868 .word 0x0800b868 + 8003c00: 0800b87c .word 0x0800b87c + 8003c04: 0800b890 .word 0x0800b890 + 8003c08: 0800b8a4 .word 0x0800b8a4 + 8003c0c: 0800b8b4 .word 0x0800b8b4 + 8003c10: 0800b8c4 .word 0x0800b8c4 + 8003c14: 0800b8d4 .word 0x0800b8d4 + 8003c18: 0800b8e4 .word 0x0800b8e4 + +08003c1c : +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + 8003c1c: b480 push {r7} + 8003c1e: b083 sub sp, #12 + 8003c20: af00 add r7, sp, #0 + + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + 8003c22: 4b0f ldr r3, [pc, #60] @ (8003c60 ) + 8003c24: 6e1b ldr r3, [r3, #96] @ 0x60 + 8003c26: 4a0e ldr r2, [pc, #56] @ (8003c60 ) + 8003c28: f043 0301 orr.w r3, r3, #1 + 8003c2c: 6613 str r3, [r2, #96] @ 0x60 + 8003c2e: 4b0c ldr r3, [pc, #48] @ (8003c60 ) + 8003c30: 6e1b ldr r3, [r3, #96] @ 0x60 + 8003c32: f003 0301 and.w r3, r3, #1 + 8003c36: 607b str r3, [r7, #4] + 8003c38: 687b ldr r3, [r7, #4] + __HAL_RCC_PWR_CLK_ENABLE(); + 8003c3a: 4b09 ldr r3, [pc, #36] @ (8003c60 ) + 8003c3c: 6d9b ldr r3, [r3, #88] @ 0x58 + 8003c3e: 4a08 ldr r2, [pc, #32] @ (8003c60 ) + 8003c40: f043 5380 orr.w r3, r3, #268435456 @ 0x10000000 + 8003c44: 6593 str r3, [r2, #88] @ 0x58 + 8003c46: 4b06 ldr r3, [pc, #24] @ (8003c60 ) + 8003c48: 6d9b ldr r3, [r3, #88] @ 0x58 + 8003c4a: f003 5380 and.w r3, r3, #268435456 @ 0x10000000 + 8003c4e: 603b str r3, [r7, #0] + 8003c50: 683b ldr r3, [r7, #0] + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + 8003c52: bf00 nop + 8003c54: 370c adds r7, #12 + 8003c56: 46bd mov sp, r7 + 8003c58: f85d 7b04 ldr.w r7, [sp], #4 + 8003c5c: 4770 bx lr + 8003c5e: bf00 nop + 8003c60: 40021000 .word 0x40021000 + +08003c64 : + * This function configures the hardware resources used in this example + * @param hi2c: I2C handle pointer + * @retval None + */ +void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c) +{ + 8003c64: b580 push {r7, lr} + 8003c66: b0a4 sub sp, #144 @ 0x90 + 8003c68: af00 add r7, sp, #0 + 8003c6a: 6078 str r0, [r7, #4] + GPIO_InitTypeDef GPIO_InitStruct = {0}; + 8003c6c: f107 037c add.w r3, r7, #124 @ 0x7c + 8003c70: 2200 movs r2, #0 + 8003c72: 601a str r2, [r3, #0] + 8003c74: 605a str r2, [r3, #4] + 8003c76: 609a str r2, [r3, #8] + 8003c78: 60da str r2, [r3, #12] + 8003c7a: 611a str r2, [r3, #16] + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + 8003c7c: f107 0314 add.w r3, r7, #20 + 8003c80: 2268 movs r2, #104 @ 0x68 + 8003c82: 2100 movs r1, #0 + 8003c84: 4618 mov r0, r3 + 8003c86: f004 f942 bl 8007f0e + if(hi2c->Instance==I2C1) + 8003c8a: 687b ldr r3, [r7, #4] + 8003c8c: 681b ldr r3, [r3, #0] + 8003c8e: 4a21 ldr r2, [pc, #132] @ (8003d14 ) + 8003c90: 4293 cmp r3, r2 + 8003c92: d13a bne.n 8003d0a + + /* USER CODE END I2C1_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_I2C1; + 8003c94: 2340 movs r3, #64 @ 0x40 + 8003c96: 617b str r3, [r7, #20] + PeriphClkInit.I2c1ClockSelection = RCC_I2C1CLKSOURCE_PCLK1; + 8003c98: 2300 movs r3, #0 + 8003c9a: 64bb str r3, [r7, #72] @ 0x48 + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + 8003c9c: f107 0314 add.w r3, r7, #20 + 8003ca0: 4618 mov r0, r3 + 8003ca2: f002 fabb bl 800621c + 8003ca6: 4603 mov r3, r0 + 8003ca8: 2b00 cmp r3, #0 + 8003caa: d001 beq.n 8003cb0 + { + Error_Handler(); + 8003cac: f7ff fcd6 bl 800365c + } + + __HAL_RCC_GPIOB_CLK_ENABLE(); + 8003cb0: 4b19 ldr r3, [pc, #100] @ (8003d18 ) + 8003cb2: 6cdb ldr r3, [r3, #76] @ 0x4c + 8003cb4: 4a18 ldr r2, [pc, #96] @ (8003d18 ) + 8003cb6: f043 0302 orr.w r3, r3, #2 + 8003cba: 64d3 str r3, [r2, #76] @ 0x4c + 8003cbc: 4b16 ldr r3, [pc, #88] @ (8003d18 ) + 8003cbe: 6cdb ldr r3, [r3, #76] @ 0x4c + 8003cc0: f003 0302 and.w r3, r3, #2 + 8003cc4: 613b str r3, [r7, #16] + 8003cc6: 693b ldr r3, [r7, #16] + /**I2C1 GPIO Configuration + PB8 ------> I2C1_SCL + PB9 ------> I2C1_SDA + */ + GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9; + 8003cc8: f44f 7340 mov.w r3, #768 @ 0x300 + 8003ccc: 67fb str r3, [r7, #124] @ 0x7c + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + 8003cce: 2312 movs r3, #18 + 8003cd0: f8c7 3080 str.w r3, [r7, #128] @ 0x80 + GPIO_InitStruct.Pull = GPIO_NOPULL; + 8003cd4: 2300 movs r3, #0 + 8003cd6: f8c7 3084 str.w r3, [r7, #132] @ 0x84 + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + 8003cda: 2303 movs r3, #3 + 8003cdc: f8c7 3088 str.w r3, [r7, #136] @ 0x88 + GPIO_InitStruct.Alternate = GPIO_AF4_I2C1; + 8003ce0: 2304 movs r3, #4 + 8003ce2: f8c7 308c str.w r3, [r7, #140] @ 0x8c + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + 8003ce6: f107 037c add.w r3, r7, #124 @ 0x7c + 8003cea: 4619 mov r1, r3 + 8003cec: 480b ldr r0, [pc, #44] @ (8003d1c ) + 8003cee: f000 fb2b bl 8004348 + + /* Peripheral clock enable */ + __HAL_RCC_I2C1_CLK_ENABLE(); + 8003cf2: 4b09 ldr r3, [pc, #36] @ (8003d18 ) + 8003cf4: 6d9b ldr r3, [r3, #88] @ 0x58 + 8003cf6: 4a08 ldr r2, [pc, #32] @ (8003d18 ) + 8003cf8: f443 1300 orr.w r3, r3, #2097152 @ 0x200000 + 8003cfc: 6593 str r3, [r2, #88] @ 0x58 + 8003cfe: 4b06 ldr r3, [pc, #24] @ (8003d18 ) + 8003d00: 6d9b ldr r3, [r3, #88] @ 0x58 + 8003d02: f403 1300 and.w r3, r3, #2097152 @ 0x200000 + 8003d06: 60fb str r3, [r7, #12] + 8003d08: 68fb ldr r3, [r7, #12] + + /* USER CODE END I2C1_MspInit 1 */ + + } + +} + 8003d0a: bf00 nop + 8003d0c: 3790 adds r7, #144 @ 0x90 + 8003d0e: 46bd mov sp, r7 + 8003d10: bd80 pop {r7, pc} + 8003d12: bf00 nop + 8003d14: 40005400 .word 0x40005400 + 8003d18: 40021000 .word 0x40021000 + 8003d1c: 48000400 .word 0x48000400 + +08003d20 : + * This function configures the hardware resources used in this example + * @param huart: UART handle pointer + * @retval None + */ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + 8003d20: b580 push {r7, lr} + 8003d22: b0a4 sub sp, #144 @ 0x90 + 8003d24: af00 add r7, sp, #0 + 8003d26: 6078 str r0, [r7, #4] + GPIO_InitTypeDef GPIO_InitStruct = {0}; + 8003d28: f107 037c add.w r3, r7, #124 @ 0x7c + 8003d2c: 2200 movs r2, #0 + 8003d2e: 601a str r2, [r3, #0] + 8003d30: 605a str r2, [r3, #4] + 8003d32: 609a str r2, [r3, #8] + 8003d34: 60da str r2, [r3, #12] + 8003d36: 611a str r2, [r3, #16] + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + 8003d38: f107 0314 add.w r3, r7, #20 + 8003d3c: 2268 movs r2, #104 @ 0x68 + 8003d3e: 2100 movs r1, #0 + 8003d40: 4618 mov r0, r3 + 8003d42: f004 f8e4 bl 8007f0e + if(huart->Instance==USART2) + 8003d46: 687b ldr r3, [r7, #4] + 8003d48: 681b ldr r3, [r3, #0] + 8003d4a: 4a21 ldr r2, [pc, #132] @ (8003dd0 ) + 8003d4c: 4293 cmp r3, r2 + 8003d4e: d13a bne.n 8003dc6 + + /* USER CODE END USART2_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2; + 8003d50: 2302 movs r3, #2 + 8003d52: 617b str r3, [r7, #20] + PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1; + 8003d54: 2300 movs r3, #0 + 8003d56: 63bb str r3, [r7, #56] @ 0x38 + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + 8003d58: f107 0314 add.w r3, r7, #20 + 8003d5c: 4618 mov r0, r3 + 8003d5e: f002 fa5d bl 800621c + 8003d62: 4603 mov r3, r0 + 8003d64: 2b00 cmp r3, #0 + 8003d66: d001 beq.n 8003d6c + { + Error_Handler(); + 8003d68: f7ff fc78 bl 800365c + } + + /* Peripheral clock enable */ + __HAL_RCC_USART2_CLK_ENABLE(); + 8003d6c: 4b19 ldr r3, [pc, #100] @ (8003dd4 ) + 8003d6e: 6d9b ldr r3, [r3, #88] @ 0x58 + 8003d70: 4a18 ldr r2, [pc, #96] @ (8003dd4 ) + 8003d72: f443 3300 orr.w r3, r3, #131072 @ 0x20000 + 8003d76: 6593 str r3, [r2, #88] @ 0x58 + 8003d78: 4b16 ldr r3, [pc, #88] @ (8003dd4 ) + 8003d7a: 6d9b ldr r3, [r3, #88] @ 0x58 + 8003d7c: f403 3300 and.w r3, r3, #131072 @ 0x20000 + 8003d80: 613b str r3, [r7, #16] + 8003d82: 693b ldr r3, [r7, #16] + + __HAL_RCC_GPIOA_CLK_ENABLE(); + 8003d84: 4b13 ldr r3, [pc, #76] @ (8003dd4 ) + 8003d86: 6cdb ldr r3, [r3, #76] @ 0x4c + 8003d88: 4a12 ldr r2, [pc, #72] @ (8003dd4 ) + 8003d8a: f043 0301 orr.w r3, r3, #1 + 8003d8e: 64d3 str r3, [r2, #76] @ 0x4c + 8003d90: 4b10 ldr r3, [pc, #64] @ (8003dd4 ) + 8003d92: 6cdb ldr r3, [r3, #76] @ 0x4c + 8003d94: f003 0301 and.w r3, r3, #1 + 8003d98: 60fb str r3, [r7, #12] + 8003d9a: 68fb ldr r3, [r7, #12] + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + GPIO_InitStruct.Pin = USART_TX_Pin|USART_RX_Pin; + 8003d9c: 230c movs r3, #12 + 8003d9e: 67fb str r3, [r7, #124] @ 0x7c + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + 8003da0: 2302 movs r3, #2 + 8003da2: f8c7 3080 str.w r3, [r7, #128] @ 0x80 + GPIO_InitStruct.Pull = GPIO_NOPULL; + 8003da6: 2300 movs r3, #0 + 8003da8: f8c7 3084 str.w r3, [r7, #132] @ 0x84 + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + 8003dac: 2303 movs r3, #3 + 8003dae: f8c7 3088 str.w r3, [r7, #136] @ 0x88 + GPIO_InitStruct.Alternate = GPIO_AF7_USART2; + 8003db2: 2307 movs r3, #7 + 8003db4: f8c7 308c str.w r3, [r7, #140] @ 0x8c + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + 8003db8: f107 037c add.w r3, r7, #124 @ 0x7c + 8003dbc: 4619 mov r1, r3 + 8003dbe: f04f 4090 mov.w r0, #1207959552 @ 0x48000000 + 8003dc2: f000 fac1 bl 8004348 + + /* USER CODE END USART2_MspInit 1 */ + + } + +} + 8003dc6: bf00 nop + 8003dc8: 3790 adds r7, #144 @ 0x90 + 8003dca: 46bd mov sp, r7 + 8003dcc: bd80 pop {r7, pc} + 8003dce: bf00 nop + 8003dd0: 40004400 .word 0x40004400 + 8003dd4: 40021000 .word 0x40021000 + +08003dd8 : +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + 8003dd8: b480 push {r7} + 8003dda: af00 add r7, sp, #0 + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + 8003ddc: bf00 nop + 8003dde: e7fd b.n 8003ddc + +08003de0 : + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + 8003de0: b480 push {r7} + 8003de2: af00 add r7, sp, #0 + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + 8003de4: bf00 nop + 8003de6: e7fd b.n 8003de4 + +08003de8 : + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + 8003de8: b480 push {r7} + 8003dea: af00 add r7, sp, #0 + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + 8003dec: bf00 nop + 8003dee: e7fd b.n 8003dec + +08003df0 : + +/** + * @brief This function handles Prefetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + 8003df0: b480 push {r7} + 8003df2: af00 add r7, sp, #0 + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + 8003df4: bf00 nop + 8003df6: e7fd b.n 8003df4 + +08003df8 : + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + 8003df8: b480 push {r7} + 8003dfa: af00 add r7, sp, #0 + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + 8003dfc: bf00 nop + 8003dfe: e7fd b.n 8003dfc + +08003e00 : + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + 8003e00: b480 push {r7} + 8003e02: af00 add r7, sp, #0 + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + 8003e04: bf00 nop + 8003e06: 46bd mov sp, r7 + 8003e08: f85d 7b04 ldr.w r7, [sp], #4 + 8003e0c: 4770 bx lr + +08003e0e : + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + 8003e0e: b480 push {r7} + 8003e10: af00 add r7, sp, #0 + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + 8003e12: bf00 nop + 8003e14: 46bd mov sp, r7 + 8003e16: f85d 7b04 ldr.w r7, [sp], #4 + 8003e1a: 4770 bx lr + +08003e1c : + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + 8003e1c: b480 push {r7} + 8003e1e: af00 add r7, sp, #0 + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + 8003e20: bf00 nop + 8003e22: 46bd mov sp, r7 + 8003e24: f85d 7b04 ldr.w r7, [sp], #4 + 8003e28: 4770 bx lr + +08003e2a : + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + 8003e2a: b580 push {r7, lr} + 8003e2c: af00 add r7, sp, #0 + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + 8003e2e: f000 f961 bl 80040f4 + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + 8003e32: bf00 nop + 8003e34: bd80 pop {r7, pc} + +08003e36 <_getpid>: +void initialise_monitor_handles() +{ +} + +int _getpid(void) +{ + 8003e36: b480 push {r7} + 8003e38: af00 add r7, sp, #0 + return 1; + 8003e3a: 2301 movs r3, #1 +} + 8003e3c: 4618 mov r0, r3 + 8003e3e: 46bd mov sp, r7 + 8003e40: f85d 7b04 ldr.w r7, [sp], #4 + 8003e44: 4770 bx lr + +08003e46 <_kill>: + +int _kill(int pid, int sig) +{ + 8003e46: b580 push {r7, lr} + 8003e48: b082 sub sp, #8 + 8003e4a: af00 add r7, sp, #0 + 8003e4c: 6078 str r0, [r7, #4] + 8003e4e: 6039 str r1, [r7, #0] + (void)pid; + (void)sig; + errno = EINVAL; + 8003e50: f004 f8b0 bl 8007fb4 <__errno> + 8003e54: 4603 mov r3, r0 + 8003e56: 2216 movs r2, #22 + 8003e58: 601a str r2, [r3, #0] + return -1; + 8003e5a: f04f 33ff mov.w r3, #4294967295 +} + 8003e5e: 4618 mov r0, r3 + 8003e60: 3708 adds r7, #8 + 8003e62: 46bd mov sp, r7 + 8003e64: bd80 pop {r7, pc} + +08003e66 <_exit>: + +void _exit (int status) +{ + 8003e66: b580 push {r7, lr} + 8003e68: b082 sub sp, #8 + 8003e6a: af00 add r7, sp, #0 + 8003e6c: 6078 str r0, [r7, #4] + _kill(status, -1); + 8003e6e: f04f 31ff mov.w r1, #4294967295 + 8003e72: 6878 ldr r0, [r7, #4] + 8003e74: f7ff ffe7 bl 8003e46 <_kill> + while (1) {} /* Make sure we hang here */ + 8003e78: bf00 nop + 8003e7a: e7fd b.n 8003e78 <_exit+0x12> + +08003e7c <_read>: +} + +__attribute__((weak)) int _read(int file, char *ptr, int len) +{ + 8003e7c: b580 push {r7, lr} + 8003e7e: b086 sub sp, #24 + 8003e80: af00 add r7, sp, #0 + 8003e82: 60f8 str r0, [r7, #12] + 8003e84: 60b9 str r1, [r7, #8] + 8003e86: 607a str r2, [r7, #4] + (void)file; + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + 8003e88: 2300 movs r3, #0 + 8003e8a: 617b str r3, [r7, #20] + 8003e8c: e00a b.n 8003ea4 <_read+0x28> + { + *ptr++ = __io_getchar(); + 8003e8e: f3af 8000 nop.w + 8003e92: 4601 mov r1, r0 + 8003e94: 68bb ldr r3, [r7, #8] + 8003e96: 1c5a adds r2, r3, #1 + 8003e98: 60ba str r2, [r7, #8] + 8003e9a: b2ca uxtb r2, r1 + 8003e9c: 701a strb r2, [r3, #0] + for (DataIdx = 0; DataIdx < len; DataIdx++) + 8003e9e: 697b ldr r3, [r7, #20] + 8003ea0: 3301 adds r3, #1 + 8003ea2: 617b str r3, [r7, #20] + 8003ea4: 697a ldr r2, [r7, #20] + 8003ea6: 687b ldr r3, [r7, #4] + 8003ea8: 429a cmp r2, r3 + 8003eaa: dbf0 blt.n 8003e8e <_read+0x12> + } + + return len; + 8003eac: 687b ldr r3, [r7, #4] +} + 8003eae: 4618 mov r0, r3 + 8003eb0: 3718 adds r7, #24 + 8003eb2: 46bd mov sp, r7 + 8003eb4: bd80 pop {r7, pc} + +08003eb6 <_write>: + +__attribute__((weak)) int _write(int file, char *ptr, int len) +{ + 8003eb6: b580 push {r7, lr} + 8003eb8: b086 sub sp, #24 + 8003eba: af00 add r7, sp, #0 + 8003ebc: 60f8 str r0, [r7, #12] + 8003ebe: 60b9 str r1, [r7, #8] + 8003ec0: 607a str r2, [r7, #4] + (void)file; + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + 8003ec2: 2300 movs r3, #0 + 8003ec4: 617b str r3, [r7, #20] + 8003ec6: e009 b.n 8003edc <_write+0x26> + { + __io_putchar(*ptr++); + 8003ec8: 68bb ldr r3, [r7, #8] + 8003eca: 1c5a adds r2, r3, #1 + 8003ecc: 60ba str r2, [r7, #8] + 8003ece: 781b ldrb r3, [r3, #0] + 8003ed0: 4618 mov r0, r3 + 8003ed2: f7ff f801 bl 8002ed8 <__io_putchar> + for (DataIdx = 0; DataIdx < len; DataIdx++) + 8003ed6: 697b ldr r3, [r7, #20] + 8003ed8: 3301 adds r3, #1 + 8003eda: 617b str r3, [r7, #20] + 8003edc: 697a ldr r2, [r7, #20] + 8003ede: 687b ldr r3, [r7, #4] + 8003ee0: 429a cmp r2, r3 + 8003ee2: dbf1 blt.n 8003ec8 <_write+0x12> + } + return len; + 8003ee4: 687b ldr r3, [r7, #4] +} + 8003ee6: 4618 mov r0, r3 + 8003ee8: 3718 adds r7, #24 + 8003eea: 46bd mov sp, r7 + 8003eec: bd80 pop {r7, pc} + +08003eee <_close>: + +int _close(int file) +{ + 8003eee: b480 push {r7} + 8003ef0: b083 sub sp, #12 + 8003ef2: af00 add r7, sp, #0 + 8003ef4: 6078 str r0, [r7, #4] + (void)file; + return -1; + 8003ef6: f04f 33ff mov.w r3, #4294967295 +} + 8003efa: 4618 mov r0, r3 + 8003efc: 370c adds r7, #12 + 8003efe: 46bd mov sp, r7 + 8003f00: f85d 7b04 ldr.w r7, [sp], #4 + 8003f04: 4770 bx lr + +08003f06 <_fstat>: + + +int _fstat(int file, struct stat *st) +{ + 8003f06: b480 push {r7} + 8003f08: b083 sub sp, #12 + 8003f0a: af00 add r7, sp, #0 + 8003f0c: 6078 str r0, [r7, #4] + 8003f0e: 6039 str r1, [r7, #0] + (void)file; + st->st_mode = S_IFCHR; + 8003f10: 683b ldr r3, [r7, #0] + 8003f12: f44f 5200 mov.w r2, #8192 @ 0x2000 + 8003f16: 605a str r2, [r3, #4] + return 0; + 8003f18: 2300 movs r3, #0 +} + 8003f1a: 4618 mov r0, r3 + 8003f1c: 370c adds r7, #12 + 8003f1e: 46bd mov sp, r7 + 8003f20: f85d 7b04 ldr.w r7, [sp], #4 + 8003f24: 4770 bx lr + +08003f26 <_isatty>: + +int _isatty(int file) +{ + 8003f26: b480 push {r7} + 8003f28: b083 sub sp, #12 + 8003f2a: af00 add r7, sp, #0 + 8003f2c: 6078 str r0, [r7, #4] + (void)file; + return 1; + 8003f2e: 2301 movs r3, #1 +} + 8003f30: 4618 mov r0, r3 + 8003f32: 370c adds r7, #12 + 8003f34: 46bd mov sp, r7 + 8003f36: f85d 7b04 ldr.w r7, [sp], #4 + 8003f3a: 4770 bx lr + +08003f3c <_lseek>: + +int _lseek(int file, int ptr, int dir) +{ + 8003f3c: b480 push {r7} + 8003f3e: b085 sub sp, #20 + 8003f40: af00 add r7, sp, #0 + 8003f42: 60f8 str r0, [r7, #12] + 8003f44: 60b9 str r1, [r7, #8] + 8003f46: 607a str r2, [r7, #4] + (void)file; + (void)ptr; + (void)dir; + return 0; + 8003f48: 2300 movs r3, #0 +} + 8003f4a: 4618 mov r0, r3 + 8003f4c: 3714 adds r7, #20 + 8003f4e: 46bd mov sp, r7 + 8003f50: f85d 7b04 ldr.w r7, [sp], #4 + 8003f54: 4770 bx lr + ... + +08003f58 <_sbrk>: + * + * @param incr Memory size + * @return Pointer to allocated memory + */ +void *_sbrk(ptrdiff_t incr) +{ + 8003f58: b580 push {r7, lr} + 8003f5a: b086 sub sp, #24 + 8003f5c: af00 add r7, sp, #0 + 8003f5e: 6078 str r0, [r7, #4] + extern uint8_t _end; /* Symbol defined in the linker script */ + extern uint8_t _estack; /* Symbol defined in the linker script */ + extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */ + const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size; + 8003f60: 4a14 ldr r2, [pc, #80] @ (8003fb4 <_sbrk+0x5c>) + 8003f62: 4b15 ldr r3, [pc, #84] @ (8003fb8 <_sbrk+0x60>) + 8003f64: 1ad3 subs r3, r2, r3 + 8003f66: 617b str r3, [r7, #20] + const uint8_t *max_heap = (uint8_t *)stack_limit; + 8003f68: 697b ldr r3, [r7, #20] + 8003f6a: 613b str r3, [r7, #16] + uint8_t *prev_heap_end; + + /* Initialize heap end at first call */ + if (NULL == __sbrk_heap_end) + 8003f6c: 4b13 ldr r3, [pc, #76] @ (8003fbc <_sbrk+0x64>) + 8003f6e: 681b ldr r3, [r3, #0] + 8003f70: 2b00 cmp r3, #0 + 8003f72: d102 bne.n 8003f7a <_sbrk+0x22> + { + __sbrk_heap_end = &_end; + 8003f74: 4b11 ldr r3, [pc, #68] @ (8003fbc <_sbrk+0x64>) + 8003f76: 4a12 ldr r2, [pc, #72] @ (8003fc0 <_sbrk+0x68>) + 8003f78: 601a str r2, [r3, #0] + } + + /* Protect heap from growing into the reserved MSP stack */ + if (__sbrk_heap_end + incr > max_heap) + 8003f7a: 4b10 ldr r3, [pc, #64] @ (8003fbc <_sbrk+0x64>) + 8003f7c: 681a ldr r2, [r3, #0] + 8003f7e: 687b ldr r3, [r7, #4] + 8003f80: 4413 add r3, r2 + 8003f82: 693a ldr r2, [r7, #16] + 8003f84: 429a cmp r2, r3 + 8003f86: d207 bcs.n 8003f98 <_sbrk+0x40> + { + errno = ENOMEM; + 8003f88: f004 f814 bl 8007fb4 <__errno> + 8003f8c: 4603 mov r3, r0 + 8003f8e: 220c movs r2, #12 + 8003f90: 601a str r2, [r3, #0] + return (void *)-1; + 8003f92: f04f 33ff mov.w r3, #4294967295 + 8003f96: e009 b.n 8003fac <_sbrk+0x54> + } + + prev_heap_end = __sbrk_heap_end; + 8003f98: 4b08 ldr r3, [pc, #32] @ (8003fbc <_sbrk+0x64>) + 8003f9a: 681b ldr r3, [r3, #0] + 8003f9c: 60fb str r3, [r7, #12] + __sbrk_heap_end += incr; + 8003f9e: 4b07 ldr r3, [pc, #28] @ (8003fbc <_sbrk+0x64>) + 8003fa0: 681a ldr r2, [r3, #0] + 8003fa2: 687b ldr r3, [r7, #4] + 8003fa4: 4413 add r3, r2 + 8003fa6: 4a05 ldr r2, [pc, #20] @ (8003fbc <_sbrk+0x64>) + 8003fa8: 6013 str r3, [r2, #0] + + return (void *)prev_heap_end; + 8003faa: 68fb ldr r3, [r7, #12] +} + 8003fac: 4618 mov r0, r3 + 8003fae: 3718 adds r7, #24 + 8003fb0: 46bd mov sp, r7 + 8003fb2: bd80 pop {r7, pc} + 8003fb4: 20020000 .word 0x20020000 + 8003fb8: 00000800 .word 0x00000800 + 8003fbc: 2000039c .word 0x2000039c + 8003fc0: 200004f0 .word 0x200004f0 + +08003fc4 : + * @brief Setup the microcontroller system. + * @retval None + */ + +void SystemInit(void) +{ + 8003fc4: b480 push {r7} + 8003fc6: af00 add r7, sp, #0 + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; +#endif + + /* FPU settings ------------------------------------------------------------*/ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 20U)|(3UL << 22U)); /* set CP10 and CP11 Full Access */ + 8003fc8: 4b06 ldr r3, [pc, #24] @ (8003fe4 ) + 8003fca: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 8003fce: 4a05 ldr r2, [pc, #20] @ (8003fe4 ) + 8003fd0: f443 0370 orr.w r3, r3, #15728640 @ 0xf00000 + 8003fd4: f8c2 3088 str.w r3, [r2, #136] @ 0x88 +#endif +} + 8003fd8: bf00 nop + 8003fda: 46bd mov sp, r7 + 8003fdc: f85d 7b04 ldr.w r7, [sp], #4 + 8003fe0: 4770 bx lr + 8003fe2: bf00 nop + 8003fe4: e000ed00 .word 0xe000ed00 + +08003fe8 : + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* Set stack pointer */ + 8003fe8: f8df d034 ldr.w sp, [pc, #52] @ 8004020 + +/* Call the clock system initialization function.*/ + bl SystemInit + 8003fec: f7ff ffea bl 8003fc4 + +/* Copy the data segment initializers from flash to SRAM */ + ldr r0, =_sdata + 8003ff0: 480c ldr r0, [pc, #48] @ (8004024 ) + ldr r1, =_edata + 8003ff2: 490d ldr r1, [pc, #52] @ (8004028 ) + ldr r2, =_sidata + 8003ff4: 4a0d ldr r2, [pc, #52] @ (800402c ) + movs r3, #0 + 8003ff6: 2300 movs r3, #0 + b LoopCopyDataInit + 8003ff8: e002 b.n 8004000 + +08003ffa : + +CopyDataInit: + ldr r4, [r2, r3] + 8003ffa: 58d4 ldr r4, [r2, r3] + str r4, [r0, r3] + 8003ffc: 50c4 str r4, [r0, r3] + adds r3, r3, #4 + 8003ffe: 3304 adds r3, #4 + +08004000 : + +LoopCopyDataInit: + adds r4, r0, r3 + 8004000: 18c4 adds r4, r0, r3 + cmp r4, r1 + 8004002: 428c cmp r4, r1 + bcc CopyDataInit + 8004004: d3f9 bcc.n 8003ffa + +/* Zero fill the bss segment. */ + ldr r2, =_sbss + 8004006: 4a0a ldr r2, [pc, #40] @ (8004030 ) + ldr r4, =_ebss + 8004008: 4c0a ldr r4, [pc, #40] @ (8004034 ) + movs r3, #0 + 800400a: 2300 movs r3, #0 + b LoopFillZerobss + 800400c: e001 b.n 8004012 + +0800400e : + +FillZerobss: + str r3, [r2] + 800400e: 6013 str r3, [r2, #0] + adds r2, r2, #4 + 8004010: 3204 adds r2, #4 + +08004012 : + +LoopFillZerobss: + cmp r2, r4 + 8004012: 42a2 cmp r2, r4 + bcc FillZerobss + 8004014: d3fb bcc.n 800400e + +/* Call static constructors */ + bl __libc_init_array + 8004016: f003 ffd3 bl 8007fc0 <__libc_init_array> +/* Call the application's entry point.*/ + bl main + 800401a: f7fe ff6f bl 8002efc
+ +0800401e : + +LoopForever: + b LoopForever + 800401e: e7fe b.n 800401e + ldr sp, =_estack /* Set stack pointer */ + 8004020: 20020000 .word 0x20020000 + ldr r0, =_sdata + 8004024: 20000000 .word 0x20000000 + ldr r1, =_edata + 8004028: 200001d4 .word 0x200001d4 + ldr r2, =_sidata + 800402c: 0800c0e4 .word 0x0800c0e4 + ldr r2, =_sbss + 8004030: 200001d4 .word 0x200001d4 + ldr r4, =_ebss + 8004034: 200004f0 .word 0x200004f0 + +08004038 : + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + 8004038: e7fe b.n 8004038 + ... + +0800403c : + * each 1ms in the SysTick_Handler() interrupt handler. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + 800403c: b580 push {r7, lr} + 800403e: b082 sub sp, #8 + 8004040: af00 add r7, sp, #0 + HAL_StatusTypeDef status = HAL_OK; + 8004042: 2300 movs r3, #0 + 8004044: 71fb strb r3, [r7, #7] +#if (DATA_CACHE_ENABLE == 0) + __HAL_FLASH_DATA_CACHE_DISABLE(); +#endif /* DATA_CACHE_ENABLE */ + +#if (PREFETCH_ENABLE != 0) + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); + 8004046: 4b0c ldr r3, [pc, #48] @ (8004078 ) + 8004048: 681b ldr r3, [r3, #0] + 800404a: 4a0b ldr r2, [pc, #44] @ (8004078 ) + 800404c: f443 7380 orr.w r3, r3, #256 @ 0x100 + 8004050: 6013 str r3, [r2, #0] +#endif /* PREFETCH_ENABLE */ + + /* Set Interrupt Group Priority */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); + 8004052: 2003 movs r0, #3 + 8004054: f000 f944 bl 80042e0 + + /* Use SysTick as time base source and configure 1ms tick (default clock after Reset is MSI) */ + if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + 8004058: 2000 movs r0, #0 + 800405a: f000 f80f bl 800407c + 800405e: 4603 mov r3, r0 + 8004060: 2b00 cmp r3, #0 + 8004062: d002 beq.n 800406a + { + status = HAL_ERROR; + 8004064: 2301 movs r3, #1 + 8004066: 71fb strb r3, [r7, #7] + 8004068: e001 b.n 800406e + } + else + { + /* Init the low level hardware */ + HAL_MspInit(); + 800406a: f7ff fdd7 bl 8003c1c + } + + /* Return function status */ + return status; + 800406e: 79fb ldrb r3, [r7, #7] +} + 8004070: 4618 mov r0, r3 + 8004072: 3708 adds r7, #8 + 8004074: 46bd mov sp, r7 + 8004076: bd80 pop {r7, pc} + 8004078: 40022000 .word 0x40022000 + +0800407c : + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + 800407c: b580 push {r7, lr} + 800407e: b084 sub sp, #16 + 8004080: af00 add r7, sp, #0 + 8004082: 6078 str r0, [r7, #4] + HAL_StatusTypeDef status = HAL_OK; + 8004084: 2300 movs r3, #0 + 8004086: 73fb strb r3, [r7, #15] + + /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that doesn't take the value zero)*/ + if ((uint32_t)uwTickFreq != 0U) + 8004088: 4b17 ldr r3, [pc, #92] @ (80040e8 ) + 800408a: 781b ldrb r3, [r3, #0] + 800408c: 2b00 cmp r3, #0 + 800408e: d023 beq.n 80040d8 + { + /*Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / (uint32_t)uwTickFreq)) == 0U) + 8004090: 4b16 ldr r3, [pc, #88] @ (80040ec ) + 8004092: 681a ldr r2, [r3, #0] + 8004094: 4b14 ldr r3, [pc, #80] @ (80040e8 ) + 8004096: 781b ldrb r3, [r3, #0] + 8004098: 4619 mov r1, r3 + 800409a: f44f 737a mov.w r3, #1000 @ 0x3e8 + 800409e: fbb3 f3f1 udiv r3, r3, r1 + 80040a2: fbb2 f3f3 udiv r3, r2, r3 + 80040a6: 4618 mov r0, r3 + 80040a8: f000 f941 bl 800432e + 80040ac: 4603 mov r3, r0 + 80040ae: 2b00 cmp r3, #0 + 80040b0: d10f bne.n 80040d2 + { + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + 80040b2: 687b ldr r3, [r7, #4] + 80040b4: 2b0f cmp r3, #15 + 80040b6: d809 bhi.n 80040cc + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + 80040b8: 2200 movs r2, #0 + 80040ba: 6879 ldr r1, [r7, #4] + 80040bc: f04f 30ff mov.w r0, #4294967295 + 80040c0: f000 f919 bl 80042f6 + uwTickPrio = TickPriority; + 80040c4: 4a0a ldr r2, [pc, #40] @ (80040f0 ) + 80040c6: 687b ldr r3, [r7, #4] + 80040c8: 6013 str r3, [r2, #0] + 80040ca: e007 b.n 80040dc + } + else + { + status = HAL_ERROR; + 80040cc: 2301 movs r3, #1 + 80040ce: 73fb strb r3, [r7, #15] + 80040d0: e004 b.n 80040dc + } + } + else + { + status = HAL_ERROR; + 80040d2: 2301 movs r3, #1 + 80040d4: 73fb strb r3, [r7, #15] + 80040d6: e001 b.n 80040dc + } + } + else + { + status = HAL_ERROR; + 80040d8: 2301 movs r3, #1 + 80040da: 73fb strb r3, [r7, #15] + } + + /* Return function status */ + return status; + 80040dc: 7bfb ldrb r3, [r7, #15] +} + 80040de: 4618 mov r0, r3 + 80040e0: 3710 adds r7, #16 + 80040e2: 46bd mov sp, r7 + 80040e4: bd80 pop {r7, pc} + 80040e6: bf00 nop + 80040e8: 20000008 .word 0x20000008 + 80040ec: 20000000 .word 0x20000000 + 80040f0: 20000004 .word 0x20000004 + +080040f4 : + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + 80040f4: b480 push {r7} + 80040f6: af00 add r7, sp, #0 + uwTick += (uint32_t)uwTickFreq; + 80040f8: 4b06 ldr r3, [pc, #24] @ (8004114 ) + 80040fa: 781b ldrb r3, [r3, #0] + 80040fc: 461a mov r2, r3 + 80040fe: 4b06 ldr r3, [pc, #24] @ (8004118 ) + 8004100: 681b ldr r3, [r3, #0] + 8004102: 4413 add r3, r2 + 8004104: 4a04 ldr r2, [pc, #16] @ (8004118 ) + 8004106: 6013 str r3, [r2, #0] +} + 8004108: bf00 nop + 800410a: 46bd mov sp, r7 + 800410c: f85d 7b04 ldr.w r7, [sp], #4 + 8004110: 4770 bx lr + 8004112: bf00 nop + 8004114: 20000008 .word 0x20000008 + 8004118: 200003a0 .word 0x200003a0 + +0800411c : + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + 800411c: b480 push {r7} + 800411e: af00 add r7, sp, #0 + return uwTick; + 8004120: 4b03 ldr r3, [pc, #12] @ (8004130 ) + 8004122: 681b ldr r3, [r3, #0] +} + 8004124: 4618 mov r0, r3 + 8004126: 46bd mov sp, r7 + 8004128: f85d 7b04 ldr.w r7, [sp], #4 + 800412c: 4770 bx lr + 800412e: bf00 nop + 8004130: 200003a0 .word 0x200003a0 + +08004134 : + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + 8004134: b580 push {r7, lr} + 8004136: b084 sub sp, #16 + 8004138: af00 add r7, sp, #0 + 800413a: 6078 str r0, [r7, #4] + uint32_t tickstart = HAL_GetTick(); + 800413c: f7ff ffee bl 800411c + 8004140: 60b8 str r0, [r7, #8] + uint32_t wait = Delay; + 8004142: 687b ldr r3, [r7, #4] + 8004144: 60fb str r3, [r7, #12] + + /* Add a period to guaranty minimum wait */ + if (wait < HAL_MAX_DELAY) + 8004146: 68fb ldr r3, [r7, #12] + 8004148: f1b3 3fff cmp.w r3, #4294967295 + 800414c: d005 beq.n 800415a + { + wait += (uint32_t)uwTickFreq; + 800414e: 4b0a ldr r3, [pc, #40] @ (8004178 ) + 8004150: 781b ldrb r3, [r3, #0] + 8004152: 461a mov r2, r3 + 8004154: 68fb ldr r3, [r7, #12] + 8004156: 4413 add r3, r2 + 8004158: 60fb str r3, [r7, #12] + } + + while ((HAL_GetTick() - tickstart) < wait) + 800415a: bf00 nop + 800415c: f7ff ffde bl 800411c + 8004160: 4602 mov r2, r0 + 8004162: 68bb ldr r3, [r7, #8] + 8004164: 1ad3 subs r3, r2, r3 + 8004166: 68fa ldr r2, [r7, #12] + 8004168: 429a cmp r2, r3 + 800416a: d8f7 bhi.n 800415c + { + } +} + 800416c: bf00 nop + 800416e: bf00 nop + 8004170: 3710 adds r7, #16 + 8004172: 46bd mov sp, r7 + 8004174: bd80 pop {r7, pc} + 8004176: bf00 nop + 8004178: 20000008 .word 0x20000008 + +0800417c <__NVIC_SetPriorityGrouping>: + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + 800417c: b480 push {r7} + 800417e: b085 sub sp, #20 + 8004180: af00 add r7, sp, #0 + 8004182: 6078 str r0, [r7, #4] + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + 8004184: 687b ldr r3, [r7, #4] + 8004186: f003 0307 and.w r3, r3, #7 + 800418a: 60fb str r3, [r7, #12] + + reg_value = SCB->AIRCR; /* read old register configuration */ + 800418c: 4b0c ldr r3, [pc, #48] @ (80041c0 <__NVIC_SetPriorityGrouping+0x44>) + 800418e: 68db ldr r3, [r3, #12] + 8004190: 60bb str r3, [r7, #8] + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + 8004192: 68ba ldr r2, [r7, #8] + 8004194: f64f 03ff movw r3, #63743 @ 0xf8ff + 8004198: 4013 ands r3, r2 + 800419a: 60bb str r3, [r7, #8] + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + 800419c: 68fb ldr r3, [r7, #12] + 800419e: 021a lsls r2, r3, #8 + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + 80041a0: 68bb ldr r3, [r7, #8] + 80041a2: 4313 orrs r3, r2 + reg_value = (reg_value | + 80041a4: f043 63bf orr.w r3, r3, #100139008 @ 0x5f80000 + 80041a8: f443 3300 orr.w r3, r3, #131072 @ 0x20000 + 80041ac: 60bb str r3, [r7, #8] + SCB->AIRCR = reg_value; + 80041ae: 4a04 ldr r2, [pc, #16] @ (80041c0 <__NVIC_SetPriorityGrouping+0x44>) + 80041b0: 68bb ldr r3, [r7, #8] + 80041b2: 60d3 str r3, [r2, #12] +} + 80041b4: bf00 nop + 80041b6: 3714 adds r7, #20 + 80041b8: 46bd mov sp, r7 + 80041ba: f85d 7b04 ldr.w r7, [sp], #4 + 80041be: 4770 bx lr + 80041c0: e000ed00 .word 0xe000ed00 + +080041c4 <__NVIC_GetPriorityGrouping>: + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + 80041c4: b480 push {r7} + 80041c6: af00 add r7, sp, #0 + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); + 80041c8: 4b04 ldr r3, [pc, #16] @ (80041dc <__NVIC_GetPriorityGrouping+0x18>) + 80041ca: 68db ldr r3, [r3, #12] + 80041cc: 0a1b lsrs r3, r3, #8 + 80041ce: f003 0307 and.w r3, r3, #7 +} + 80041d2: 4618 mov r0, r3 + 80041d4: 46bd mov sp, r7 + 80041d6: f85d 7b04 ldr.w r7, [sp], #4 + 80041da: 4770 bx lr + 80041dc: e000ed00 .word 0xe000ed00 + +080041e0 <__NVIC_SetPriority>: + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + 80041e0: b480 push {r7} + 80041e2: b083 sub sp, #12 + 80041e4: af00 add r7, sp, #0 + 80041e6: 4603 mov r3, r0 + 80041e8: 6039 str r1, [r7, #0] + 80041ea: 71fb strb r3, [r7, #7] + if ((int32_t)(IRQn) >= 0) + 80041ec: f997 3007 ldrsb.w r3, [r7, #7] + 80041f0: 2b00 cmp r3, #0 + 80041f2: db0a blt.n 800420a <__NVIC_SetPriority+0x2a> + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + 80041f4: 683b ldr r3, [r7, #0] + 80041f6: b2da uxtb r2, r3 + 80041f8: 490c ldr r1, [pc, #48] @ (800422c <__NVIC_SetPriority+0x4c>) + 80041fa: f997 3007 ldrsb.w r3, [r7, #7] + 80041fe: 0112 lsls r2, r2, #4 + 8004200: b2d2 uxtb r2, r2 + 8004202: 440b add r3, r1 + 8004204: f883 2300 strb.w r2, [r3, #768] @ 0x300 + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + 8004208: e00a b.n 8004220 <__NVIC_SetPriority+0x40> + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + 800420a: 683b ldr r3, [r7, #0] + 800420c: b2da uxtb r2, r3 + 800420e: 4908 ldr r1, [pc, #32] @ (8004230 <__NVIC_SetPriority+0x50>) + 8004210: 79fb ldrb r3, [r7, #7] + 8004212: f003 030f and.w r3, r3, #15 + 8004216: 3b04 subs r3, #4 + 8004218: 0112 lsls r2, r2, #4 + 800421a: b2d2 uxtb r2, r2 + 800421c: 440b add r3, r1 + 800421e: 761a strb r2, [r3, #24] +} + 8004220: bf00 nop + 8004222: 370c adds r7, #12 + 8004224: 46bd mov sp, r7 + 8004226: f85d 7b04 ldr.w r7, [sp], #4 + 800422a: 4770 bx lr + 800422c: e000e100 .word 0xe000e100 + 8004230: e000ed00 .word 0xe000ed00 + +08004234 : + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + 8004234: b480 push {r7} + 8004236: b089 sub sp, #36 @ 0x24 + 8004238: af00 add r7, sp, #0 + 800423a: 60f8 str r0, [r7, #12] + 800423c: 60b9 str r1, [r7, #8] + 800423e: 607a str r2, [r7, #4] + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + 8004240: 68fb ldr r3, [r7, #12] + 8004242: f003 0307 and.w r3, r3, #7 + 8004246: 61fb str r3, [r7, #28] + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + 8004248: 69fb ldr r3, [r7, #28] + 800424a: f1c3 0307 rsb r3, r3, #7 + 800424e: 2b04 cmp r3, #4 + 8004250: bf28 it cs + 8004252: 2304 movcs r3, #4 + 8004254: 61bb str r3, [r7, #24] + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + 8004256: 69fb ldr r3, [r7, #28] + 8004258: 3304 adds r3, #4 + 800425a: 2b06 cmp r3, #6 + 800425c: d902 bls.n 8004264 + 800425e: 69fb ldr r3, [r7, #28] + 8004260: 3b03 subs r3, #3 + 8004262: e000 b.n 8004266 + 8004264: 2300 movs r3, #0 + 8004266: 617b str r3, [r7, #20] + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + 8004268: f04f 32ff mov.w r2, #4294967295 + 800426c: 69bb ldr r3, [r7, #24] + 800426e: fa02 f303 lsl.w r3, r2, r3 + 8004272: 43da mvns r2, r3 + 8004274: 68bb ldr r3, [r7, #8] + 8004276: 401a ands r2, r3 + 8004278: 697b ldr r3, [r7, #20] + 800427a: 409a lsls r2, r3 + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + 800427c: f04f 31ff mov.w r1, #4294967295 + 8004280: 697b ldr r3, [r7, #20] + 8004282: fa01 f303 lsl.w r3, r1, r3 + 8004286: 43d9 mvns r1, r3 + 8004288: 687b ldr r3, [r7, #4] + 800428a: 400b ands r3, r1 + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + 800428c: 4313 orrs r3, r2 + ); +} + 800428e: 4618 mov r0, r3 + 8004290: 3724 adds r7, #36 @ 0x24 + 8004292: 46bd mov sp, r7 + 8004294: f85d 7b04 ldr.w r7, [sp], #4 + 8004298: 4770 bx lr + ... + +0800429c : + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + 800429c: b580 push {r7, lr} + 800429e: b082 sub sp, #8 + 80042a0: af00 add r7, sp, #0 + 80042a2: 6078 str r0, [r7, #4] + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + 80042a4: 687b ldr r3, [r7, #4] + 80042a6: 3b01 subs r3, #1 + 80042a8: f1b3 7f80 cmp.w r3, #16777216 @ 0x1000000 + 80042ac: d301 bcc.n 80042b2 + { + return (1UL); /* Reload value impossible */ + 80042ae: 2301 movs r3, #1 + 80042b0: e00f b.n 80042d2 + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + 80042b2: 4a0a ldr r2, [pc, #40] @ (80042dc ) + 80042b4: 687b ldr r3, [r7, #4] + 80042b6: 3b01 subs r3, #1 + 80042b8: 6053 str r3, [r2, #4] + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + 80042ba: 210f movs r1, #15 + 80042bc: f04f 30ff mov.w r0, #4294967295 + 80042c0: f7ff ff8e bl 80041e0 <__NVIC_SetPriority> + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + 80042c4: 4b05 ldr r3, [pc, #20] @ (80042dc ) + 80042c6: 2200 movs r2, #0 + 80042c8: 609a str r2, [r3, #8] + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + 80042ca: 4b04 ldr r3, [pc, #16] @ (80042dc ) + 80042cc: 2207 movs r2, #7 + 80042ce: 601a str r2, [r3, #0] + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ + 80042d0: 2300 movs r3, #0 +} + 80042d2: 4618 mov r0, r3 + 80042d4: 3708 adds r7, #8 + 80042d6: 46bd mov sp, r7 + 80042d8: bd80 pop {r7, pc} + 80042da: bf00 nop + 80042dc: e000e010 .word 0xe000e010 + +080042e0 : + * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible. + * The pending IRQ priority will be managed only by the subpriority. + * @retval None + */ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + 80042e0: b580 push {r7, lr} + 80042e2: b082 sub sp, #8 + 80042e4: af00 add r7, sp, #0 + 80042e6: 6078 str r0, [r7, #4] + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ + NVIC_SetPriorityGrouping(PriorityGroup); + 80042e8: 6878 ldr r0, [r7, #4] + 80042ea: f7ff ff47 bl 800417c <__NVIC_SetPriorityGrouping> +} + 80042ee: bf00 nop + 80042f0: 3708 adds r7, #8 + 80042f2: 46bd mov sp, r7 + 80042f4: bd80 pop {r7, pc} + +080042f6 : + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + 80042f6: b580 push {r7, lr} + 80042f8: b086 sub sp, #24 + 80042fa: af00 add r7, sp, #0 + 80042fc: 4603 mov r3, r0 + 80042fe: 60b9 str r1, [r7, #8] + 8004300: 607a str r2, [r7, #4] + 8004302: 73fb strb r3, [r7, #15] + uint32_t prioritygroup = 0x00; + 8004304: 2300 movs r3, #0 + 8004306: 617b str r3, [r7, #20] + + /* Check the parameters */ + assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + + prioritygroup = NVIC_GetPriorityGrouping(); + 8004308: f7ff ff5c bl 80041c4 <__NVIC_GetPriorityGrouping> + 800430c: 6178 str r0, [r7, #20] + + NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); + 800430e: 687a ldr r2, [r7, #4] + 8004310: 68b9 ldr r1, [r7, #8] + 8004312: 6978 ldr r0, [r7, #20] + 8004314: f7ff ff8e bl 8004234 + 8004318: 4602 mov r2, r0 + 800431a: f997 300f ldrsb.w r3, [r7, #15] + 800431e: 4611 mov r1, r2 + 8004320: 4618 mov r0, r3 + 8004322: f7ff ff5d bl 80041e0 <__NVIC_SetPriority> +} + 8004326: bf00 nop + 8004328: 3718 adds r7, #24 + 800432a: 46bd mov sp, r7 + 800432c: bd80 pop {r7, pc} + +0800432e : + * @param TicksNumb: Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + 800432e: b580 push {r7, lr} + 8004330: b082 sub sp, #8 + 8004332: af00 add r7, sp, #0 + 8004334: 6078 str r0, [r7, #4] + return SysTick_Config(TicksNumb); + 8004336: 6878 ldr r0, [r7, #4] + 8004338: f7ff ffb0 bl 800429c + 800433c: 4603 mov r3, r0 +} + 800433e: 4618 mov r0, r3 + 8004340: 3708 adds r7, #8 + 8004342: 46bd mov sp, r7 + 8004344: bd80 pop {r7, pc} + ... + +08004348 : + * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + 8004348: b480 push {r7} + 800434a: b087 sub sp, #28 + 800434c: af00 add r7, sp, #0 + 800434e: 6078 str r0, [r7, #4] + 8004350: 6039 str r1, [r7, #0] + uint32_t position = 0x00u; + 8004352: 2300 movs r3, #0 + 8004354: 617b str r3, [r7, #20] + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + 8004356: e154 b.n 8004602 + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1uL << position); + 8004358: 683b ldr r3, [r7, #0] + 800435a: 681a ldr r2, [r3, #0] + 800435c: 2101 movs r1, #1 + 800435e: 697b ldr r3, [r7, #20] + 8004360: fa01 f303 lsl.w r3, r1, r3 + 8004364: 4013 ands r3, r2 + 8004366: 60fb str r3, [r7, #12] + + if (iocurrent != 0x00u) + 8004368: 68fb ldr r3, [r7, #12] + 800436a: 2b00 cmp r3, #0 + 800436c: f000 8146 beq.w 80045fc + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if (((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)) + 8004370: 683b ldr r3, [r7, #0] + 8004372: 685b ldr r3, [r3, #4] + 8004374: f003 0303 and.w r3, r3, #3 + 8004378: 2b01 cmp r3, #1 + 800437a: d005 beq.n 8004388 + 800437c: 683b ldr r3, [r7, #0] + 800437e: 685b ldr r3, [r3, #4] + 8004380: f003 0303 and.w r3, r3, #3 + 8004384: 2b02 cmp r3, #2 + 8004386: d130 bne.n 80043ea + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + 8004388: 687b ldr r3, [r7, #4] + 800438a: 689b ldr r3, [r3, #8] + 800438c: 613b str r3, [r7, #16] + temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + 800438e: 697b ldr r3, [r7, #20] + 8004390: 005b lsls r3, r3, #1 + 8004392: 2203 movs r2, #3 + 8004394: fa02 f303 lsl.w r3, r2, r3 + 8004398: 43db mvns r3, r3 + 800439a: 693a ldr r2, [r7, #16] + 800439c: 4013 ands r3, r2 + 800439e: 613b str r3, [r7, #16] + temp |= (GPIO_Init->Speed << (position * 2u)); + 80043a0: 683b ldr r3, [r7, #0] + 80043a2: 68da ldr r2, [r3, #12] + 80043a4: 697b ldr r3, [r7, #20] + 80043a6: 005b lsls r3, r3, #1 + 80043a8: fa02 f303 lsl.w r3, r2, r3 + 80043ac: 693a ldr r2, [r7, #16] + 80043ae: 4313 orrs r3, r2 + 80043b0: 613b str r3, [r7, #16] + GPIOx->OSPEEDR = temp; + 80043b2: 687b ldr r3, [r7, #4] + 80043b4: 693a ldr r2, [r7, #16] + 80043b6: 609a str r2, [r3, #8] + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + 80043b8: 687b ldr r3, [r7, #4] + 80043ba: 685b ldr r3, [r3, #4] + 80043bc: 613b str r3, [r7, #16] + temp &= ~(GPIO_OTYPER_OT0 << position) ; + 80043be: 2201 movs r2, #1 + 80043c0: 697b ldr r3, [r7, #20] + 80043c2: fa02 f303 lsl.w r3, r2, r3 + 80043c6: 43db mvns r3, r3 + 80043c8: 693a ldr r2, [r7, #16] + 80043ca: 4013 ands r3, r2 + 80043cc: 613b str r3, [r7, #16] + temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); + 80043ce: 683b ldr r3, [r7, #0] + 80043d0: 685b ldr r3, [r3, #4] + 80043d2: 091b lsrs r3, r3, #4 + 80043d4: f003 0201 and.w r2, r3, #1 + 80043d8: 697b ldr r3, [r7, #20] + 80043da: fa02 f303 lsl.w r3, r2, r3 + 80043de: 693a ldr r2, [r7, #16] + 80043e0: 4313 orrs r3, r2 + 80043e2: 613b str r3, [r7, #16] + GPIOx->OTYPER = temp; + 80043e4: 687b ldr r3, [r7, #4] + 80043e6: 693a ldr r2, [r7, #16] + 80043e8: 605a str r2, [r3, #4] + } + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + + /* Activate the Pull-up or Pull down resistor for the current IO */ + if ((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) + 80043ea: 683b ldr r3, [r7, #0] + 80043ec: 685b ldr r3, [r3, #4] + 80043ee: f003 0303 and.w r3, r3, #3 + 80043f2: 2b03 cmp r3, #3 + 80043f4: d017 beq.n 8004426 + { + /* Check the Pull parameter */ + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + temp = GPIOx->PUPDR; + 80043f6: 687b ldr r3, [r7, #4] + 80043f8: 68db ldr r3, [r3, #12] + 80043fa: 613b str r3, [r7, #16] + temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2U)); + 80043fc: 697b ldr r3, [r7, #20] + 80043fe: 005b lsls r3, r3, #1 + 8004400: 2203 movs r2, #3 + 8004402: fa02 f303 lsl.w r3, r2, r3 + 8004406: 43db mvns r3, r3 + 8004408: 693a ldr r2, [r7, #16] + 800440a: 4013 ands r3, r2 + 800440c: 613b str r3, [r7, #16] + temp |= ((GPIO_Init->Pull) << (position * 2U)); + 800440e: 683b ldr r3, [r7, #0] + 8004410: 689a ldr r2, [r3, #8] + 8004412: 697b ldr r3, [r7, #20] + 8004414: 005b lsls r3, r3, #1 + 8004416: fa02 f303 lsl.w r3, r2, r3 + 800441a: 693a ldr r2, [r7, #16] + 800441c: 4313 orrs r3, r2 + 800441e: 613b str r3, [r7, #16] + GPIOx->PUPDR = temp; + 8004420: 687b ldr r3, [r7, #4] + 8004422: 693a ldr r2, [r7, #16] + 8004424: 60da str r2, [r3, #12] + } + + /* In case of Alternate function mode selection */ + if ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) + 8004426: 683b ldr r3, [r7, #0] + 8004428: 685b ldr r3, [r3, #4] + 800442a: f003 0303 and.w r3, r3, #3 + 800442e: 2b02 cmp r3, #2 + 8004430: d123 bne.n 800447a + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3u]; + 8004432: 697b ldr r3, [r7, #20] + 8004434: 08da lsrs r2, r3, #3 + 8004436: 687b ldr r3, [r7, #4] + 8004438: 3208 adds r2, #8 + 800443a: f853 3022 ldr.w r3, [r3, r2, lsl #2] + 800443e: 613b str r3, [r7, #16] + temp &= ~(0xFu << ((position & 0x07u) * 4u)); + 8004440: 697b ldr r3, [r7, #20] + 8004442: f003 0307 and.w r3, r3, #7 + 8004446: 009b lsls r3, r3, #2 + 8004448: 220f movs r2, #15 + 800444a: fa02 f303 lsl.w r3, r2, r3 + 800444e: 43db mvns r3, r3 + 8004450: 693a ldr r2, [r7, #16] + 8004452: 4013 ands r3, r2 + 8004454: 613b str r3, [r7, #16] + temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); + 8004456: 683b ldr r3, [r7, #0] + 8004458: 691a ldr r2, [r3, #16] + 800445a: 697b ldr r3, [r7, #20] + 800445c: f003 0307 and.w r3, r3, #7 + 8004460: 009b lsls r3, r3, #2 + 8004462: fa02 f303 lsl.w r3, r2, r3 + 8004466: 693a ldr r2, [r7, #16] + 8004468: 4313 orrs r3, r2 + 800446a: 613b str r3, [r7, #16] + GPIOx->AFR[position >> 3u] = temp; + 800446c: 697b ldr r3, [r7, #20] + 800446e: 08da lsrs r2, r3, #3 + 8004470: 687b ldr r3, [r7, #4] + 8004472: 3208 adds r2, #8 + 8004474: 6939 ldr r1, [r7, #16] + 8004476: f843 1022 str.w r1, [r3, r2, lsl #2] + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + 800447a: 687b ldr r3, [r7, #4] + 800447c: 681b ldr r3, [r3, #0] + 800447e: 613b str r3, [r7, #16] + temp &= ~(GPIO_MODER_MODE0 << (position * 2u)); + 8004480: 697b ldr r3, [r7, #20] + 8004482: 005b lsls r3, r3, #1 + 8004484: 2203 movs r2, #3 + 8004486: fa02 f303 lsl.w r3, r2, r3 + 800448a: 43db mvns r3, r3 + 800448c: 693a ldr r2, [r7, #16] + 800448e: 4013 ands r3, r2 + 8004490: 613b str r3, [r7, #16] + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); + 8004492: 683b ldr r3, [r7, #0] + 8004494: 685b ldr r3, [r3, #4] + 8004496: f003 0203 and.w r2, r3, #3 + 800449a: 697b ldr r3, [r7, #20] + 800449c: 005b lsls r3, r3, #1 + 800449e: fa02 f303 lsl.w r3, r2, r3 + 80044a2: 693a ldr r2, [r7, #16] + 80044a4: 4313 orrs r3, r2 + 80044a6: 613b str r3, [r7, #16] + GPIOx->MODER = temp; + 80044a8: 687b ldr r3, [r7, #4] + 80044aa: 693a ldr r2, [r7, #16] + 80044ac: 601a str r2, [r3, #0] + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((GPIO_Init->Mode & EXTI_MODE) != 0x00u) + 80044ae: 683b ldr r3, [r7, #0] + 80044b0: 685b ldr r3, [r3, #4] + 80044b2: f403 3340 and.w r3, r3, #196608 @ 0x30000 + 80044b6: 2b00 cmp r3, #0 + 80044b8: f000 80a0 beq.w 80045fc + { + /* Enable SYSCFG Clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + 80044bc: 4b58 ldr r3, [pc, #352] @ (8004620 ) + 80044be: 6e1b ldr r3, [r3, #96] @ 0x60 + 80044c0: 4a57 ldr r2, [pc, #348] @ (8004620 ) + 80044c2: f043 0301 orr.w r3, r3, #1 + 80044c6: 6613 str r3, [r2, #96] @ 0x60 + 80044c8: 4b55 ldr r3, [pc, #340] @ (8004620 ) + 80044ca: 6e1b ldr r3, [r3, #96] @ 0x60 + 80044cc: f003 0301 and.w r3, r3, #1 + 80044d0: 60bb str r3, [r7, #8] + 80044d2: 68bb ldr r3, [r7, #8] + + temp = SYSCFG->EXTICR[position >> 2u]; + 80044d4: 4a53 ldr r2, [pc, #332] @ (8004624 ) + 80044d6: 697b ldr r3, [r7, #20] + 80044d8: 089b lsrs r3, r3, #2 + 80044da: 3302 adds r3, #2 + 80044dc: f852 3023 ldr.w r3, [r2, r3, lsl #2] + 80044e0: 613b str r3, [r7, #16] + temp &= ~(0x0FuL << (4u * (position & 0x03u))); + 80044e2: 697b ldr r3, [r7, #20] + 80044e4: f003 0303 and.w r3, r3, #3 + 80044e8: 009b lsls r3, r3, #2 + 80044ea: 220f movs r2, #15 + 80044ec: fa02 f303 lsl.w r3, r2, r3 + 80044f0: 43db mvns r3, r3 + 80044f2: 693a ldr r2, [r7, #16] + 80044f4: 4013 ands r3, r2 + 80044f6: 613b str r3, [r7, #16] + temp |= (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u))); + 80044f8: 687b ldr r3, [r7, #4] + 80044fa: f1b3 4f90 cmp.w r3, #1207959552 @ 0x48000000 + 80044fe: d019 beq.n 8004534 + 8004500: 687b ldr r3, [r7, #4] + 8004502: 4a49 ldr r2, [pc, #292] @ (8004628 ) + 8004504: 4293 cmp r3, r2 + 8004506: d013 beq.n 8004530 + 8004508: 687b ldr r3, [r7, #4] + 800450a: 4a48 ldr r2, [pc, #288] @ (800462c ) + 800450c: 4293 cmp r3, r2 + 800450e: d00d beq.n 800452c + 8004510: 687b ldr r3, [r7, #4] + 8004512: 4a47 ldr r2, [pc, #284] @ (8004630 ) + 8004514: 4293 cmp r3, r2 + 8004516: d007 beq.n 8004528 + 8004518: 687b ldr r3, [r7, #4] + 800451a: 4a46 ldr r2, [pc, #280] @ (8004634 ) + 800451c: 4293 cmp r3, r2 + 800451e: d101 bne.n 8004524 + 8004520: 2304 movs r3, #4 + 8004522: e008 b.n 8004536 + 8004524: 2307 movs r3, #7 + 8004526: e006 b.n 8004536 + 8004528: 2303 movs r3, #3 + 800452a: e004 b.n 8004536 + 800452c: 2302 movs r3, #2 + 800452e: e002 b.n 8004536 + 8004530: 2301 movs r3, #1 + 8004532: e000 b.n 8004536 + 8004534: 2300 movs r3, #0 + 8004536: 697a ldr r2, [r7, #20] + 8004538: f002 0203 and.w r2, r2, #3 + 800453c: 0092 lsls r2, r2, #2 + 800453e: 4093 lsls r3, r2 + 8004540: 693a ldr r2, [r7, #16] + 8004542: 4313 orrs r3, r2 + 8004544: 613b str r3, [r7, #16] + SYSCFG->EXTICR[position >> 2u] = temp; + 8004546: 4937 ldr r1, [pc, #220] @ (8004624 ) + 8004548: 697b ldr r3, [r7, #20] + 800454a: 089b lsrs r3, r3, #2 + 800454c: 3302 adds r3, #2 + 800454e: 693a ldr r2, [r7, #16] + 8004550: f841 2023 str.w r2, [r1, r3, lsl #2] + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR1; + 8004554: 4b38 ldr r3, [pc, #224] @ (8004638 ) + 8004556: 689b ldr r3, [r3, #8] + 8004558: 613b str r3, [r7, #16] + temp &= ~(iocurrent); + 800455a: 68fb ldr r3, [r7, #12] + 800455c: 43db mvns r3, r3 + 800455e: 693a ldr r2, [r7, #16] + 8004560: 4013 ands r3, r2 + 8004562: 613b str r3, [r7, #16] + if ((GPIO_Init->Mode & TRIGGER_RISING) != 0x00u) + 8004564: 683b ldr r3, [r7, #0] + 8004566: 685b ldr r3, [r3, #4] + 8004568: f403 1380 and.w r3, r3, #1048576 @ 0x100000 + 800456c: 2b00 cmp r3, #0 + 800456e: d003 beq.n 8004578 + { + temp |= iocurrent; + 8004570: 693a ldr r2, [r7, #16] + 8004572: 68fb ldr r3, [r7, #12] + 8004574: 4313 orrs r3, r2 + 8004576: 613b str r3, [r7, #16] + } + EXTI->RTSR1 = temp; + 8004578: 4a2f ldr r2, [pc, #188] @ (8004638 ) + 800457a: 693b ldr r3, [r7, #16] + 800457c: 6093 str r3, [r2, #8] + + temp = EXTI->FTSR1; + 800457e: 4b2e ldr r3, [pc, #184] @ (8004638 ) + 8004580: 68db ldr r3, [r3, #12] + 8004582: 613b str r3, [r7, #16] + temp &= ~(iocurrent); + 8004584: 68fb ldr r3, [r7, #12] + 8004586: 43db mvns r3, r3 + 8004588: 693a ldr r2, [r7, #16] + 800458a: 4013 ands r3, r2 + 800458c: 613b str r3, [r7, #16] + if ((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00u) + 800458e: 683b ldr r3, [r7, #0] + 8004590: 685b ldr r3, [r3, #4] + 8004592: f403 1300 and.w r3, r3, #2097152 @ 0x200000 + 8004596: 2b00 cmp r3, #0 + 8004598: d003 beq.n 80045a2 + { + temp |= iocurrent; + 800459a: 693a ldr r2, [r7, #16] + 800459c: 68fb ldr r3, [r7, #12] + 800459e: 4313 orrs r3, r2 + 80045a0: 613b str r3, [r7, #16] + } + EXTI->FTSR1 = temp; + 80045a2: 4a25 ldr r2, [pc, #148] @ (8004638 ) + 80045a4: 693b ldr r3, [r7, #16] + 80045a6: 60d3 str r3, [r2, #12] + + /* Clear EXTI line configuration */ + temp = EXTI->EMR1; + 80045a8: 4b23 ldr r3, [pc, #140] @ (8004638 ) + 80045aa: 685b ldr r3, [r3, #4] + 80045ac: 613b str r3, [r7, #16] + temp &= ~(iocurrent); + 80045ae: 68fb ldr r3, [r7, #12] + 80045b0: 43db mvns r3, r3 + 80045b2: 693a ldr r2, [r7, #16] + 80045b4: 4013 ands r3, r2 + 80045b6: 613b str r3, [r7, #16] + if ((GPIO_Init->Mode & EXTI_EVT) != 0x00u) + 80045b8: 683b ldr r3, [r7, #0] + 80045ba: 685b ldr r3, [r3, #4] + 80045bc: f403 3300 and.w r3, r3, #131072 @ 0x20000 + 80045c0: 2b00 cmp r3, #0 + 80045c2: d003 beq.n 80045cc + { + temp |= iocurrent; + 80045c4: 693a ldr r2, [r7, #16] + 80045c6: 68fb ldr r3, [r7, #12] + 80045c8: 4313 orrs r3, r2 + 80045ca: 613b str r3, [r7, #16] + } + EXTI->EMR1 = temp; + 80045cc: 4a1a ldr r2, [pc, #104] @ (8004638 ) + 80045ce: 693b ldr r3, [r7, #16] + 80045d0: 6053 str r3, [r2, #4] + + temp = EXTI->IMR1; + 80045d2: 4b19 ldr r3, [pc, #100] @ (8004638 ) + 80045d4: 681b ldr r3, [r3, #0] + 80045d6: 613b str r3, [r7, #16] + temp &= ~(iocurrent); + 80045d8: 68fb ldr r3, [r7, #12] + 80045da: 43db mvns r3, r3 + 80045dc: 693a ldr r2, [r7, #16] + 80045de: 4013 ands r3, r2 + 80045e0: 613b str r3, [r7, #16] + if ((GPIO_Init->Mode & EXTI_IT) != 0x00u) + 80045e2: 683b ldr r3, [r7, #0] + 80045e4: 685b ldr r3, [r3, #4] + 80045e6: f403 3380 and.w r3, r3, #65536 @ 0x10000 + 80045ea: 2b00 cmp r3, #0 + 80045ec: d003 beq.n 80045f6 + { + temp |= iocurrent; + 80045ee: 693a ldr r2, [r7, #16] + 80045f0: 68fb ldr r3, [r7, #12] + 80045f2: 4313 orrs r3, r2 + 80045f4: 613b str r3, [r7, #16] + } + EXTI->IMR1 = temp; + 80045f6: 4a10 ldr r2, [pc, #64] @ (8004638 ) + 80045f8: 693b ldr r3, [r7, #16] + 80045fa: 6013 str r3, [r2, #0] + } + } + + position++; + 80045fc: 697b ldr r3, [r7, #20] + 80045fe: 3301 adds r3, #1 + 8004600: 617b str r3, [r7, #20] + while (((GPIO_Init->Pin) >> position) != 0x00u) + 8004602: 683b ldr r3, [r7, #0] + 8004604: 681a ldr r2, [r3, #0] + 8004606: 697b ldr r3, [r7, #20] + 8004608: fa22 f303 lsr.w r3, r2, r3 + 800460c: 2b00 cmp r3, #0 + 800460e: f47f aea3 bne.w 8004358 + } +} + 8004612: bf00 nop + 8004614: bf00 nop + 8004616: 371c adds r7, #28 + 8004618: 46bd mov sp, r7 + 800461a: f85d 7b04 ldr.w r7, [sp], #4 + 800461e: 4770 bx lr + 8004620: 40021000 .word 0x40021000 + 8004624: 40010000 .word 0x40010000 + 8004628: 48000400 .word 0x48000400 + 800462c: 48000800 .word 0x48000800 + 8004630: 48000c00 .word 0x48000c00 + 8004634: 48001000 .word 0x48001000 + 8004638: 40010400 .word 0x40010400 + +0800463c : + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + 800463c: b480 push {r7} + 800463e: b083 sub sp, #12 + 8004640: af00 add r7, sp, #0 + 8004642: 6078 str r0, [r7, #4] + 8004644: 460b mov r3, r1 + 8004646: 807b strh r3, [r7, #2] + 8004648: 4613 mov r3, r2 + 800464a: 707b strb r3, [r7, #1] + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if(PinState != GPIO_PIN_RESET) + 800464c: 787b ldrb r3, [r7, #1] + 800464e: 2b00 cmp r3, #0 + 8004650: d003 beq.n 800465a + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + 8004652: 887a ldrh r2, [r7, #2] + 8004654: 687b ldr r3, [r7, #4] + 8004656: 619a str r2, [r3, #24] + } + else + { + GPIOx->BRR = (uint32_t)GPIO_Pin; + } +} + 8004658: e002 b.n 8004660 + GPIOx->BRR = (uint32_t)GPIO_Pin; + 800465a: 887a ldrh r2, [r7, #2] + 800465c: 687b ldr r3, [r7, #4] + 800465e: 629a str r2, [r3, #40] @ 0x28 +} + 8004660: bf00 nop + 8004662: 370c adds r7, #12 + 8004664: 46bd mov sp, r7 + 8004666: f85d 7b04 ldr.w r7, [sp], #4 + 800466a: 4770 bx lr + +0800466c : + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + 800466c: b580 push {r7, lr} + 800466e: b082 sub sp, #8 + 8004670: af00 add r7, sp, #0 + 8004672: 6078 str r0, [r7, #4] + /* Check the I2C handle allocation */ + if (hi2c == NULL) + 8004674: 687b ldr r3, [r7, #4] + 8004676: 2b00 cmp r3, #0 + 8004678: d101 bne.n 800467e + { + return HAL_ERROR; + 800467a: 2301 movs r3, #1 + 800467c: e08d b.n 800479a + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + 800467e: 687b ldr r3, [r7, #4] + 8004680: f893 3041 ldrb.w r3, [r3, #65] @ 0x41 + 8004684: b2db uxtb r3, r3 + 8004686: 2b00 cmp r3, #0 + 8004688: d106 bne.n 8004698 + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + 800468a: 687b ldr r3, [r7, #4] + 800468c: 2200 movs r2, #0 + 800468e: f883 2040 strb.w r2, [r3, #64] @ 0x40 + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2C_MspInit(hi2c); + 8004692: 6878 ldr r0, [r7, #4] + 8004694: f7ff fae6 bl 8003c64 +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + 8004698: 687b ldr r3, [r7, #4] + 800469a: 2224 movs r2, #36 @ 0x24 + 800469c: f883 2041 strb.w r2, [r3, #65] @ 0x41 + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + 80046a0: 687b ldr r3, [r7, #4] + 80046a2: 681b ldr r3, [r3, #0] + 80046a4: 681a ldr r2, [r3, #0] + 80046a6: 687b ldr r3, [r7, #4] + 80046a8: 681b ldr r3, [r3, #0] + 80046aa: f022 0201 bic.w r2, r2, #1 + 80046ae: 601a str r2, [r3, #0] + + /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; + 80046b0: 687b ldr r3, [r7, #4] + 80046b2: 685a ldr r2, [r3, #4] + 80046b4: 687b ldr r3, [r7, #4] + 80046b6: 681b ldr r3, [r3, #0] + 80046b8: f022 6270 bic.w r2, r2, #251658240 @ 0xf000000 + 80046bc: 611a str r2, [r3, #16] + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Disable Own Address1 before set the Own Address1 configuration */ + hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + 80046be: 687b ldr r3, [r7, #4] + 80046c0: 681b ldr r3, [r3, #0] + 80046c2: 689a ldr r2, [r3, #8] + 80046c4: 687b ldr r3, [r7, #4] + 80046c6: 681b ldr r3, [r3, #0] + 80046c8: f422 4200 bic.w r2, r2, #32768 @ 0x8000 + 80046cc: 609a str r2, [r3, #8] + + /* Configure I2Cx: Own Address1 and ack own address1 mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + 80046ce: 687b ldr r3, [r7, #4] + 80046d0: 68db ldr r3, [r3, #12] + 80046d2: 2b01 cmp r3, #1 + 80046d4: d107 bne.n 80046e6 + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); + 80046d6: 687b ldr r3, [r7, #4] + 80046d8: 689a ldr r2, [r3, #8] + 80046da: 687b ldr r3, [r7, #4] + 80046dc: 681b ldr r3, [r3, #0] + 80046de: f442 4200 orr.w r2, r2, #32768 @ 0x8000 + 80046e2: 609a str r2, [r3, #8] + 80046e4: e006 b.n 80046f4 + } + else /* I2C_ADDRESSINGMODE_10BIT */ + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); + 80046e6: 687b ldr r3, [r7, #4] + 80046e8: 689a ldr r2, [r3, #8] + 80046ea: 687b ldr r3, [r7, #4] + 80046ec: 681b ldr r3, [r3, #0] + 80046ee: f442 4204 orr.w r2, r2, #33792 @ 0x8400 + 80046f2: 609a str r2, [r3, #8] + } + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Addressing Master mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + 80046f4: 687b ldr r3, [r7, #4] + 80046f6: 68db ldr r3, [r3, #12] + 80046f8: 2b02 cmp r3, #2 + 80046fa: d108 bne.n 800470e + { + SET_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + 80046fc: 687b ldr r3, [r7, #4] + 80046fe: 681b ldr r3, [r3, #0] + 8004700: 685a ldr r2, [r3, #4] + 8004702: 687b ldr r3, [r7, #4] + 8004704: 681b ldr r3, [r3, #0] + 8004706: f442 6200 orr.w r2, r2, #2048 @ 0x800 + 800470a: 605a str r2, [r3, #4] + 800470c: e007 b.n 800471e + } + else + { + /* Clear the I2C ADD10 bit */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + 800470e: 687b ldr r3, [r7, #4] + 8004710: 681b ldr r3, [r3, #0] + 8004712: 685a ldr r2, [r3, #4] + 8004714: 687b ldr r3, [r7, #4] + 8004716: 681b ldr r3, [r3, #0] + 8004718: f422 6200 bic.w r2, r2, #2048 @ 0x800 + 800471c: 605a str r2, [r3, #4] + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ + hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + 800471e: 687b ldr r3, [r7, #4] + 8004720: 681b ldr r3, [r3, #0] + 8004722: 685b ldr r3, [r3, #4] + 8004724: 687a ldr r2, [r7, #4] + 8004726: 6812 ldr r2, [r2, #0] + 8004728: f043 7300 orr.w r3, r3, #33554432 @ 0x2000000 + 800472c: f443 4300 orr.w r3, r3, #32768 @ 0x8000 + 8004730: 6053 str r3, [r2, #4] + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Disable Own Address2 before set the Own Address2 configuration */ + hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; + 8004732: 687b ldr r3, [r7, #4] + 8004734: 681b ldr r3, [r3, #0] + 8004736: 68da ldr r2, [r3, #12] + 8004738: 687b ldr r3, [r7, #4] + 800473a: 681b ldr r3, [r3, #0] + 800473c: f422 4200 bic.w r2, r2, #32768 @ 0x8000 + 8004740: 60da str r2, [r3, #12] + + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | \ + 8004742: 687b ldr r3, [r7, #4] + 8004744: 691a ldr r2, [r3, #16] + 8004746: 687b ldr r3, [r7, #4] + 8004748: 695b ldr r3, [r3, #20] + 800474a: ea42 0103 orr.w r1, r2, r3 + (hi2c->Init.OwnAddress2Masks << 8)); + 800474e: 687b ldr r3, [r7, #4] + 8004750: 699b ldr r3, [r3, #24] + 8004752: 021a lsls r2, r3, #8 + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | \ + 8004754: 687b ldr r3, [r7, #4] + 8004756: 681b ldr r3, [r3, #0] + 8004758: 430a orrs r2, r1 + 800475a: 60da str r2, [r3, #12] + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + 800475c: 687b ldr r3, [r7, #4] + 800475e: 69d9 ldr r1, [r3, #28] + 8004760: 687b ldr r3, [r7, #4] + 8004762: 6a1a ldr r2, [r3, #32] + 8004764: 687b ldr r3, [r7, #4] + 8004766: 681b ldr r3, [r3, #0] + 8004768: 430a orrs r2, r1 + 800476a: 601a str r2, [r3, #0] + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + 800476c: 687b ldr r3, [r7, #4] + 800476e: 681b ldr r3, [r3, #0] + 8004770: 681a ldr r2, [r3, #0] + 8004772: 687b ldr r3, [r7, #4] + 8004774: 681b ldr r3, [r3, #0] + 8004776: f042 0201 orr.w r2, r2, #1 + 800477a: 601a str r2, [r3, #0] + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + 800477c: 687b ldr r3, [r7, #4] + 800477e: 2200 movs r2, #0 + 8004780: 645a str r2, [r3, #68] @ 0x44 + hi2c->State = HAL_I2C_STATE_READY; + 8004782: 687b ldr r3, [r7, #4] + 8004784: 2220 movs r2, #32 + 8004786: f883 2041 strb.w r2, [r3, #65] @ 0x41 + hi2c->PreviousState = I2C_STATE_NONE; + 800478a: 687b ldr r3, [r7, #4] + 800478c: 2200 movs r2, #0 + 800478e: 631a str r2, [r3, #48] @ 0x30 + hi2c->Mode = HAL_I2C_MODE_NONE; + 8004790: 687b ldr r3, [r7, #4] + 8004792: 2200 movs r2, #0 + 8004794: f883 2042 strb.w r2, [r3, #66] @ 0x42 + + return HAL_OK; + 8004798: 2300 movs r3, #0 +} + 800479a: 4618 mov r0, r3 + 800479c: 3708 adds r7, #8 + 800479e: 46bd mov sp, r7 + 80047a0: bd80 pop {r7, pc} + ... + +080047a4 : + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + 80047a4: b580 push {r7, lr} + 80047a6: b088 sub sp, #32 + 80047a8: af02 add r7, sp, #8 + 80047aa: 60f8 str r0, [r7, #12] + 80047ac: 607a str r2, [r7, #4] + 80047ae: 461a mov r2, r3 + 80047b0: 460b mov r3, r1 + 80047b2: 817b strh r3, [r7, #10] + 80047b4: 4613 mov r3, r2 + 80047b6: 813b strh r3, [r7, #8] + uint32_t tickstart; + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + 80047b8: 68fb ldr r3, [r7, #12] + 80047ba: f893 3041 ldrb.w r3, [r3, #65] @ 0x41 + 80047be: b2db uxtb r3, r3 + 80047c0: 2b20 cmp r3, #32 + 80047c2: f040 80fd bne.w 80049c0 + { + /* Process Locked */ + __HAL_LOCK(hi2c); + 80047c6: 68fb ldr r3, [r7, #12] + 80047c8: f893 3040 ldrb.w r3, [r3, #64] @ 0x40 + 80047cc: 2b01 cmp r3, #1 + 80047ce: d101 bne.n 80047d4 + 80047d0: 2302 movs r3, #2 + 80047d2: e0f6 b.n 80049c2 + 80047d4: 68fb ldr r3, [r7, #12] + 80047d6: 2201 movs r2, #1 + 80047d8: f883 2040 strb.w r2, [r3, #64] @ 0x40 + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + 80047dc: f7ff fc9e bl 800411c + 80047e0: 6138 str r0, [r7, #16] + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + 80047e2: 693b ldr r3, [r7, #16] + 80047e4: 9300 str r3, [sp, #0] + 80047e6: 2319 movs r3, #25 + 80047e8: 2201 movs r2, #1 + 80047ea: f44f 4100 mov.w r1, #32768 @ 0x8000 + 80047ee: 68f8 ldr r0, [r7, #12] + 80047f0: f000 fbea bl 8004fc8 + 80047f4: 4603 mov r3, r0 + 80047f6: 2b00 cmp r3, #0 + 80047f8: d001 beq.n 80047fe + { + return HAL_ERROR; + 80047fa: 2301 movs r3, #1 + 80047fc: e0e1 b.n 80049c2 + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + 80047fe: 68fb ldr r3, [r7, #12] + 8004800: 2221 movs r2, #33 @ 0x21 + 8004802: f883 2041 strb.w r2, [r3, #65] @ 0x41 + hi2c->Mode = HAL_I2C_MODE_MASTER; + 8004806: 68fb ldr r3, [r7, #12] + 8004808: 2210 movs r2, #16 + 800480a: f883 2042 strb.w r2, [r3, #66] @ 0x42 + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + 800480e: 68fb ldr r3, [r7, #12] + 8004810: 2200 movs r2, #0 + 8004812: 645a str r2, [r3, #68] @ 0x44 + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + 8004814: 68fb ldr r3, [r7, #12] + 8004816: 687a ldr r2, [r7, #4] + 8004818: 625a str r2, [r3, #36] @ 0x24 + hi2c->XferCount = Size; + 800481a: 68fb ldr r3, [r7, #12] + 800481c: 893a ldrh r2, [r7, #8] + 800481e: 855a strh r2, [r3, #42] @ 0x2a + hi2c->XferISR = NULL; + 8004820: 68fb ldr r3, [r7, #12] + 8004822: 2200 movs r2, #0 + 8004824: 635a str r2, [r3, #52] @ 0x34 + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + 8004826: 68fb ldr r3, [r7, #12] + 8004828: 8d5b ldrh r3, [r3, #42] @ 0x2a + 800482a: b29b uxth r3, r3 + 800482c: 2bff cmp r3, #255 @ 0xff + 800482e: d906 bls.n 800483e + { + hi2c->XferSize = MAX_NBYTE_SIZE; + 8004830: 68fb ldr r3, [r7, #12] + 8004832: 22ff movs r2, #255 @ 0xff + 8004834: 851a strh r2, [r3, #40] @ 0x28 + xfermode = I2C_RELOAD_MODE; + 8004836: f04f 7380 mov.w r3, #16777216 @ 0x1000000 + 800483a: 617b str r3, [r7, #20] + 800483c: e007 b.n 800484e + } + else + { + hi2c->XferSize = hi2c->XferCount; + 800483e: 68fb ldr r3, [r7, #12] + 8004840: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004842: b29a uxth r2, r3 + 8004844: 68fb ldr r3, [r7, #12] + 8004846: 851a strh r2, [r3, #40] @ 0x28 + xfermode = I2C_AUTOEND_MODE; + 8004848: f04f 7300 mov.w r3, #33554432 @ 0x2000000 + 800484c: 617b str r3, [r7, #20] + } + + if (hi2c->XferSize > 0U) + 800484e: 68fb ldr r3, [r7, #12] + 8004850: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004852: 2b00 cmp r3, #0 + 8004854: d024 beq.n 80048a0 + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + 8004856: 68fb ldr r3, [r7, #12] + 8004858: 6a5b ldr r3, [r3, #36] @ 0x24 + 800485a: 781a ldrb r2, [r3, #0] + 800485c: 68fb ldr r3, [r7, #12] + 800485e: 681b ldr r3, [r3, #0] + 8004860: 629a str r2, [r3, #40] @ 0x28 + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + 8004862: 68fb ldr r3, [r7, #12] + 8004864: 6a5b ldr r3, [r3, #36] @ 0x24 + 8004866: 1c5a adds r2, r3, #1 + 8004868: 68fb ldr r3, [r7, #12] + 800486a: 625a str r2, [r3, #36] @ 0x24 + + hi2c->XferCount--; + 800486c: 68fb ldr r3, [r7, #12] + 800486e: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004870: b29b uxth r3, r3 + 8004872: 3b01 subs r3, #1 + 8004874: b29a uxth r2, r3 + 8004876: 68fb ldr r3, [r7, #12] + 8004878: 855a strh r2, [r3, #42] @ 0x2a + hi2c->XferSize--; + 800487a: 68fb ldr r3, [r7, #12] + 800487c: 8d1b ldrh r3, [r3, #40] @ 0x28 + 800487e: 3b01 subs r3, #1 + 8004880: b29a uxth r2, r3 + 8004882: 68fb ldr r3, [r7, #12] + 8004884: 851a strh r2, [r3, #40] @ 0x28 + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, + 8004886: 68fb ldr r3, [r7, #12] + 8004888: 8d1b ldrh r3, [r3, #40] @ 0x28 + 800488a: b2db uxtb r3, r3 + 800488c: 3301 adds r3, #1 + 800488e: b2da uxtb r2, r3 + 8004890: 8979 ldrh r1, [r7, #10] + 8004892: 4b4e ldr r3, [pc, #312] @ (80049cc ) + 8004894: 9300 str r3, [sp, #0] + 8004896: 697b ldr r3, [r7, #20] + 8004898: 68f8 ldr r0, [r7, #12] + 800489a: f000 fd59 bl 8005350 + 800489e: e066 b.n 800496e + } + else + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, + 80048a0: 68fb ldr r3, [r7, #12] + 80048a2: 8d1b ldrh r3, [r3, #40] @ 0x28 + 80048a4: b2da uxtb r2, r3 + 80048a6: 8979 ldrh r1, [r7, #10] + 80048a8: 4b48 ldr r3, [pc, #288] @ (80049cc ) + 80048aa: 9300 str r3, [sp, #0] + 80048ac: 697b ldr r3, [r7, #20] + 80048ae: 68f8 ldr r0, [r7, #12] + 80048b0: f000 fd4e bl 8005350 + I2C_GENERATE_START_WRITE); + } + + while (hi2c->XferCount > 0U) + 80048b4: e05b b.n 800496e + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + 80048b6: 693a ldr r2, [r7, #16] + 80048b8: 6a39 ldr r1, [r7, #32] + 80048ba: 68f8 ldr r0, [r7, #12] + 80048bc: f000 fbdd bl 800507a + 80048c0: 4603 mov r3, r0 + 80048c2: 2b00 cmp r3, #0 + 80048c4: d001 beq.n 80048ca + { + return HAL_ERROR; + 80048c6: 2301 movs r3, #1 + 80048c8: e07b b.n 80049c2 + } + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + 80048ca: 68fb ldr r3, [r7, #12] + 80048cc: 6a5b ldr r3, [r3, #36] @ 0x24 + 80048ce: 781a ldrb r2, [r3, #0] + 80048d0: 68fb ldr r3, [r7, #12] + 80048d2: 681b ldr r3, [r3, #0] + 80048d4: 629a str r2, [r3, #40] @ 0x28 + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + 80048d6: 68fb ldr r3, [r7, #12] + 80048d8: 6a5b ldr r3, [r3, #36] @ 0x24 + 80048da: 1c5a adds r2, r3, #1 + 80048dc: 68fb ldr r3, [r7, #12] + 80048de: 625a str r2, [r3, #36] @ 0x24 + + hi2c->XferCount--; + 80048e0: 68fb ldr r3, [r7, #12] + 80048e2: 8d5b ldrh r3, [r3, #42] @ 0x2a + 80048e4: b29b uxth r3, r3 + 80048e6: 3b01 subs r3, #1 + 80048e8: b29a uxth r2, r3 + 80048ea: 68fb ldr r3, [r7, #12] + 80048ec: 855a strh r2, [r3, #42] @ 0x2a + hi2c->XferSize--; + 80048ee: 68fb ldr r3, [r7, #12] + 80048f0: 8d1b ldrh r3, [r3, #40] @ 0x28 + 80048f2: 3b01 subs r3, #1 + 80048f4: b29a uxth r2, r3 + 80048f6: 68fb ldr r3, [r7, #12] + 80048f8: 851a strh r2, [r3, #40] @ 0x28 + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + 80048fa: 68fb ldr r3, [r7, #12] + 80048fc: 8d5b ldrh r3, [r3, #42] @ 0x2a + 80048fe: b29b uxth r3, r3 + 8004900: 2b00 cmp r3, #0 + 8004902: d034 beq.n 800496e + 8004904: 68fb ldr r3, [r7, #12] + 8004906: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004908: 2b00 cmp r3, #0 + 800490a: d130 bne.n 800496e + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + 800490c: 693b ldr r3, [r7, #16] + 800490e: 9300 str r3, [sp, #0] + 8004910: 6a3b ldr r3, [r7, #32] + 8004912: 2200 movs r2, #0 + 8004914: 2180 movs r1, #128 @ 0x80 + 8004916: 68f8 ldr r0, [r7, #12] + 8004918: f000 fb56 bl 8004fc8 + 800491c: 4603 mov r3, r0 + 800491e: 2b00 cmp r3, #0 + 8004920: d001 beq.n 8004926 + { + return HAL_ERROR; + 8004922: 2301 movs r3, #1 + 8004924: e04d b.n 80049c2 + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + 8004926: 68fb ldr r3, [r7, #12] + 8004928: 8d5b ldrh r3, [r3, #42] @ 0x2a + 800492a: b29b uxth r3, r3 + 800492c: 2bff cmp r3, #255 @ 0xff + 800492e: d90e bls.n 800494e + { + hi2c->XferSize = MAX_NBYTE_SIZE; + 8004930: 68fb ldr r3, [r7, #12] + 8004932: 22ff movs r2, #255 @ 0xff + 8004934: 851a strh r2, [r3, #40] @ 0x28 + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + 8004936: 68fb ldr r3, [r7, #12] + 8004938: 8d1b ldrh r3, [r3, #40] @ 0x28 + 800493a: b2da uxtb r2, r3 + 800493c: 8979 ldrh r1, [r7, #10] + 800493e: 2300 movs r3, #0 + 8004940: 9300 str r3, [sp, #0] + 8004942: f04f 7380 mov.w r3, #16777216 @ 0x1000000 + 8004946: 68f8 ldr r0, [r7, #12] + 8004948: f000 fd02 bl 8005350 + 800494c: e00f b.n 800496e + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + 800494e: 68fb ldr r3, [r7, #12] + 8004950: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004952: b29a uxth r2, r3 + 8004954: 68fb ldr r3, [r7, #12] + 8004956: 851a strh r2, [r3, #40] @ 0x28 + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + 8004958: 68fb ldr r3, [r7, #12] + 800495a: 8d1b ldrh r3, [r3, #40] @ 0x28 + 800495c: b2da uxtb r2, r3 + 800495e: 8979 ldrh r1, [r7, #10] + 8004960: 2300 movs r3, #0 + 8004962: 9300 str r3, [sp, #0] + 8004964: f04f 7300 mov.w r3, #33554432 @ 0x2000000 + 8004968: 68f8 ldr r0, [r7, #12] + 800496a: f000 fcf1 bl 8005350 + while (hi2c->XferCount > 0U) + 800496e: 68fb ldr r3, [r7, #12] + 8004970: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004972: b29b uxth r3, r3 + 8004974: 2b00 cmp r3, #0 + 8004976: d19e bne.n 80048b6 + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + 8004978: 693a ldr r2, [r7, #16] + 800497a: 6a39 ldr r1, [r7, #32] + 800497c: 68f8 ldr r0, [r7, #12] + 800497e: f000 fbc3 bl 8005108 + 8004982: 4603 mov r3, r0 + 8004984: 2b00 cmp r3, #0 + 8004986: d001 beq.n 800498c + { + return HAL_ERROR; + 8004988: 2301 movs r3, #1 + 800498a: e01a b.n 80049c2 + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + 800498c: 68fb ldr r3, [r7, #12] + 800498e: 681b ldr r3, [r3, #0] + 8004990: 2220 movs r2, #32 + 8004992: 61da str r2, [r3, #28] + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + 8004994: 68fb ldr r3, [r7, #12] + 8004996: 681b ldr r3, [r3, #0] + 8004998: 6859 ldr r1, [r3, #4] + 800499a: 68fb ldr r3, [r7, #12] + 800499c: 681a ldr r2, [r3, #0] + 800499e: 4b0c ldr r3, [pc, #48] @ (80049d0 ) + 80049a0: 400b ands r3, r1 + 80049a2: 6053 str r3, [r2, #4] + + hi2c->State = HAL_I2C_STATE_READY; + 80049a4: 68fb ldr r3, [r7, #12] + 80049a6: 2220 movs r2, #32 + 80049a8: f883 2041 strb.w r2, [r3, #65] @ 0x41 + hi2c->Mode = HAL_I2C_MODE_NONE; + 80049ac: 68fb ldr r3, [r7, #12] + 80049ae: 2200 movs r2, #0 + 80049b0: f883 2042 strb.w r2, [r3, #66] @ 0x42 + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + 80049b4: 68fb ldr r3, [r7, #12] + 80049b6: 2200 movs r2, #0 + 80049b8: f883 2040 strb.w r2, [r3, #64] @ 0x40 + + return HAL_OK; + 80049bc: 2300 movs r3, #0 + 80049be: e000 b.n 80049c2 + } + else + { + return HAL_BUSY; + 80049c0: 2302 movs r3, #2 + } +} + 80049c2: 4618 mov r0, r3 + 80049c4: 3718 adds r7, #24 + 80049c6: 46bd mov sp, r7 + 80049c8: bd80 pop {r7, pc} + 80049ca: bf00 nop + 80049cc: 80002000 .word 0x80002000 + 80049d0: fe00e800 .word 0xfe00e800 + +080049d4 : + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + 80049d4: b580 push {r7, lr} + 80049d6: b088 sub sp, #32 + 80049d8: af02 add r7, sp, #8 + 80049da: 60f8 str r0, [r7, #12] + 80049dc: 4608 mov r0, r1 + 80049de: 4611 mov r1, r2 + 80049e0: 461a mov r2, r3 + 80049e2: 4603 mov r3, r0 + 80049e4: 817b strh r3, [r7, #10] + 80049e6: 460b mov r3, r1 + 80049e8: 813b strh r3, [r7, #8] + 80049ea: 4613 mov r3, r2 + 80049ec: 80fb strh r3, [r7, #6] + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + 80049ee: 68fb ldr r3, [r7, #12] + 80049f0: f893 3041 ldrb.w r3, [r3, #65] @ 0x41 + 80049f4: b2db uxtb r3, r3 + 80049f6: 2b20 cmp r3, #32 + 80049f8: f040 80f9 bne.w 8004bee + { + if ((pData == NULL) || (Size == 0U)) + 80049fc: 6a3b ldr r3, [r7, #32] + 80049fe: 2b00 cmp r3, #0 + 8004a00: d002 beq.n 8004a08 + 8004a02: 8cbb ldrh r3, [r7, #36] @ 0x24 + 8004a04: 2b00 cmp r3, #0 + 8004a06: d105 bne.n 8004a14 + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + 8004a08: 68fb ldr r3, [r7, #12] + 8004a0a: f44f 7200 mov.w r2, #512 @ 0x200 + 8004a0e: 645a str r2, [r3, #68] @ 0x44 + return HAL_ERROR; + 8004a10: 2301 movs r3, #1 + 8004a12: e0ed b.n 8004bf0 + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + 8004a14: 68fb ldr r3, [r7, #12] + 8004a16: f893 3040 ldrb.w r3, [r3, #64] @ 0x40 + 8004a1a: 2b01 cmp r3, #1 + 8004a1c: d101 bne.n 8004a22 + 8004a1e: 2302 movs r3, #2 + 8004a20: e0e6 b.n 8004bf0 + 8004a22: 68fb ldr r3, [r7, #12] + 8004a24: 2201 movs r2, #1 + 8004a26: f883 2040 strb.w r2, [r3, #64] @ 0x40 + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + 8004a2a: f7ff fb77 bl 800411c + 8004a2e: 6178 str r0, [r7, #20] + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + 8004a30: 697b ldr r3, [r7, #20] + 8004a32: 9300 str r3, [sp, #0] + 8004a34: 2319 movs r3, #25 + 8004a36: 2201 movs r2, #1 + 8004a38: f44f 4100 mov.w r1, #32768 @ 0x8000 + 8004a3c: 68f8 ldr r0, [r7, #12] + 8004a3e: f000 fac3 bl 8004fc8 + 8004a42: 4603 mov r3, r0 + 8004a44: 2b00 cmp r3, #0 + 8004a46: d001 beq.n 8004a4c + { + return HAL_ERROR; + 8004a48: 2301 movs r3, #1 + 8004a4a: e0d1 b.n 8004bf0 + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + 8004a4c: 68fb ldr r3, [r7, #12] + 8004a4e: 2221 movs r2, #33 @ 0x21 + 8004a50: f883 2041 strb.w r2, [r3, #65] @ 0x41 + hi2c->Mode = HAL_I2C_MODE_MEM; + 8004a54: 68fb ldr r3, [r7, #12] + 8004a56: 2240 movs r2, #64 @ 0x40 + 8004a58: f883 2042 strb.w r2, [r3, #66] @ 0x42 + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + 8004a5c: 68fb ldr r3, [r7, #12] + 8004a5e: 2200 movs r2, #0 + 8004a60: 645a str r2, [r3, #68] @ 0x44 + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + 8004a62: 68fb ldr r3, [r7, #12] + 8004a64: 6a3a ldr r2, [r7, #32] + 8004a66: 625a str r2, [r3, #36] @ 0x24 + hi2c->XferCount = Size; + 8004a68: 68fb ldr r3, [r7, #12] + 8004a6a: 8cba ldrh r2, [r7, #36] @ 0x24 + 8004a6c: 855a strh r2, [r3, #42] @ 0x2a + hi2c->XferISR = NULL; + 8004a6e: 68fb ldr r3, [r7, #12] + 8004a70: 2200 movs r2, #0 + 8004a72: 635a str r2, [r3, #52] @ 0x34 + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + 8004a74: 88f8 ldrh r0, [r7, #6] + 8004a76: 893a ldrh r2, [r7, #8] + 8004a78: 8979 ldrh r1, [r7, #10] + 8004a7a: 697b ldr r3, [r7, #20] + 8004a7c: 9301 str r3, [sp, #4] + 8004a7e: 6abb ldr r3, [r7, #40] @ 0x28 + 8004a80: 9300 str r3, [sp, #0] + 8004a82: 4603 mov r3, r0 + 8004a84: 68f8 ldr r0, [r7, #12] + 8004a86: f000 f9d3 bl 8004e30 + 8004a8a: 4603 mov r3, r0 + 8004a8c: 2b00 cmp r3, #0 + 8004a8e: d005 beq.n 8004a9c + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + 8004a90: 68fb ldr r3, [r7, #12] + 8004a92: 2200 movs r2, #0 + 8004a94: f883 2040 strb.w r2, [r3, #64] @ 0x40 + return HAL_ERROR; + 8004a98: 2301 movs r3, #1 + 8004a9a: e0a9 b.n 8004bf0 + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + 8004a9c: 68fb ldr r3, [r7, #12] + 8004a9e: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004aa0: b29b uxth r3, r3 + 8004aa2: 2bff cmp r3, #255 @ 0xff + 8004aa4: d90e bls.n 8004ac4 + { + hi2c->XferSize = MAX_NBYTE_SIZE; + 8004aa6: 68fb ldr r3, [r7, #12] + 8004aa8: 22ff movs r2, #255 @ 0xff + 8004aaa: 851a strh r2, [r3, #40] @ 0x28 + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + 8004aac: 68fb ldr r3, [r7, #12] + 8004aae: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004ab0: b2da uxtb r2, r3 + 8004ab2: 8979 ldrh r1, [r7, #10] + 8004ab4: 2300 movs r3, #0 + 8004ab6: 9300 str r3, [sp, #0] + 8004ab8: f04f 7380 mov.w r3, #16777216 @ 0x1000000 + 8004abc: 68f8 ldr r0, [r7, #12] + 8004abe: f000 fc47 bl 8005350 + 8004ac2: e00f b.n 8004ae4 + } + else + { + hi2c->XferSize = hi2c->XferCount; + 8004ac4: 68fb ldr r3, [r7, #12] + 8004ac6: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004ac8: b29a uxth r2, r3 + 8004aca: 68fb ldr r3, [r7, #12] + 8004acc: 851a strh r2, [r3, #40] @ 0x28 + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + 8004ace: 68fb ldr r3, [r7, #12] + 8004ad0: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004ad2: b2da uxtb r2, r3 + 8004ad4: 8979 ldrh r1, [r7, #10] + 8004ad6: 2300 movs r3, #0 + 8004ad8: 9300 str r3, [sp, #0] + 8004ada: f04f 7300 mov.w r3, #33554432 @ 0x2000000 + 8004ade: 68f8 ldr r0, [r7, #12] + 8004ae0: f000 fc36 bl 8005350 + } + + do + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + 8004ae4: 697a ldr r2, [r7, #20] + 8004ae6: 6ab9 ldr r1, [r7, #40] @ 0x28 + 8004ae8: 68f8 ldr r0, [r7, #12] + 8004aea: f000 fac6 bl 800507a + 8004aee: 4603 mov r3, r0 + 8004af0: 2b00 cmp r3, #0 + 8004af2: d001 beq.n 8004af8 + { + return HAL_ERROR; + 8004af4: 2301 movs r3, #1 + 8004af6: e07b b.n 8004bf0 + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + 8004af8: 68fb ldr r3, [r7, #12] + 8004afa: 6a5b ldr r3, [r3, #36] @ 0x24 + 8004afc: 781a ldrb r2, [r3, #0] + 8004afe: 68fb ldr r3, [r7, #12] + 8004b00: 681b ldr r3, [r3, #0] + 8004b02: 629a str r2, [r3, #40] @ 0x28 + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + 8004b04: 68fb ldr r3, [r7, #12] + 8004b06: 6a5b ldr r3, [r3, #36] @ 0x24 + 8004b08: 1c5a adds r2, r3, #1 + 8004b0a: 68fb ldr r3, [r7, #12] + 8004b0c: 625a str r2, [r3, #36] @ 0x24 + + hi2c->XferCount--; + 8004b0e: 68fb ldr r3, [r7, #12] + 8004b10: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004b12: b29b uxth r3, r3 + 8004b14: 3b01 subs r3, #1 + 8004b16: b29a uxth r2, r3 + 8004b18: 68fb ldr r3, [r7, #12] + 8004b1a: 855a strh r2, [r3, #42] @ 0x2a + hi2c->XferSize--; + 8004b1c: 68fb ldr r3, [r7, #12] + 8004b1e: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004b20: 3b01 subs r3, #1 + 8004b22: b29a uxth r2, r3 + 8004b24: 68fb ldr r3, [r7, #12] + 8004b26: 851a strh r2, [r3, #40] @ 0x28 + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + 8004b28: 68fb ldr r3, [r7, #12] + 8004b2a: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004b2c: b29b uxth r3, r3 + 8004b2e: 2b00 cmp r3, #0 + 8004b30: d034 beq.n 8004b9c + 8004b32: 68fb ldr r3, [r7, #12] + 8004b34: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004b36: 2b00 cmp r3, #0 + 8004b38: d130 bne.n 8004b9c + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + 8004b3a: 697b ldr r3, [r7, #20] + 8004b3c: 9300 str r3, [sp, #0] + 8004b3e: 6abb ldr r3, [r7, #40] @ 0x28 + 8004b40: 2200 movs r2, #0 + 8004b42: 2180 movs r1, #128 @ 0x80 + 8004b44: 68f8 ldr r0, [r7, #12] + 8004b46: f000 fa3f bl 8004fc8 + 8004b4a: 4603 mov r3, r0 + 8004b4c: 2b00 cmp r3, #0 + 8004b4e: d001 beq.n 8004b54 + { + return HAL_ERROR; + 8004b50: 2301 movs r3, #1 + 8004b52: e04d b.n 8004bf0 + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + 8004b54: 68fb ldr r3, [r7, #12] + 8004b56: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004b58: b29b uxth r3, r3 + 8004b5a: 2bff cmp r3, #255 @ 0xff + 8004b5c: d90e bls.n 8004b7c + { + hi2c->XferSize = MAX_NBYTE_SIZE; + 8004b5e: 68fb ldr r3, [r7, #12] + 8004b60: 22ff movs r2, #255 @ 0xff + 8004b62: 851a strh r2, [r3, #40] @ 0x28 + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + 8004b64: 68fb ldr r3, [r7, #12] + 8004b66: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004b68: b2da uxtb r2, r3 + 8004b6a: 8979 ldrh r1, [r7, #10] + 8004b6c: 2300 movs r3, #0 + 8004b6e: 9300 str r3, [sp, #0] + 8004b70: f04f 7380 mov.w r3, #16777216 @ 0x1000000 + 8004b74: 68f8 ldr r0, [r7, #12] + 8004b76: f000 fbeb bl 8005350 + 8004b7a: e00f b.n 8004b9c + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + 8004b7c: 68fb ldr r3, [r7, #12] + 8004b7e: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004b80: b29a uxth r2, r3 + 8004b82: 68fb ldr r3, [r7, #12] + 8004b84: 851a strh r2, [r3, #40] @ 0x28 + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + 8004b86: 68fb ldr r3, [r7, #12] + 8004b88: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004b8a: b2da uxtb r2, r3 + 8004b8c: 8979 ldrh r1, [r7, #10] + 8004b8e: 2300 movs r3, #0 + 8004b90: 9300 str r3, [sp, #0] + 8004b92: f04f 7300 mov.w r3, #33554432 @ 0x2000000 + 8004b96: 68f8 ldr r0, [r7, #12] + 8004b98: f000 fbda bl 8005350 + I2C_NO_STARTSTOP); + } + } + + } while (hi2c->XferCount > 0U); + 8004b9c: 68fb ldr r3, [r7, #12] + 8004b9e: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004ba0: b29b uxth r3, r3 + 8004ba2: 2b00 cmp r3, #0 + 8004ba4: d19e bne.n 8004ae4 + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + 8004ba6: 697a ldr r2, [r7, #20] + 8004ba8: 6ab9 ldr r1, [r7, #40] @ 0x28 + 8004baa: 68f8 ldr r0, [r7, #12] + 8004bac: f000 faac bl 8005108 + 8004bb0: 4603 mov r3, r0 + 8004bb2: 2b00 cmp r3, #0 + 8004bb4: d001 beq.n 8004bba + { + return HAL_ERROR; + 8004bb6: 2301 movs r3, #1 + 8004bb8: e01a b.n 8004bf0 + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + 8004bba: 68fb ldr r3, [r7, #12] + 8004bbc: 681b ldr r3, [r3, #0] + 8004bbe: 2220 movs r2, #32 + 8004bc0: 61da str r2, [r3, #28] + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + 8004bc2: 68fb ldr r3, [r7, #12] + 8004bc4: 681b ldr r3, [r3, #0] + 8004bc6: 6859 ldr r1, [r3, #4] + 8004bc8: 68fb ldr r3, [r7, #12] + 8004bca: 681a ldr r2, [r3, #0] + 8004bcc: 4b0a ldr r3, [pc, #40] @ (8004bf8 ) + 8004bce: 400b ands r3, r1 + 8004bd0: 6053 str r3, [r2, #4] + + hi2c->State = HAL_I2C_STATE_READY; + 8004bd2: 68fb ldr r3, [r7, #12] + 8004bd4: 2220 movs r2, #32 + 8004bd6: f883 2041 strb.w r2, [r3, #65] @ 0x41 + hi2c->Mode = HAL_I2C_MODE_NONE; + 8004bda: 68fb ldr r3, [r7, #12] + 8004bdc: 2200 movs r2, #0 + 8004bde: f883 2042 strb.w r2, [r3, #66] @ 0x42 + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + 8004be2: 68fb ldr r3, [r7, #12] + 8004be4: 2200 movs r2, #0 + 8004be6: f883 2040 strb.w r2, [r3, #64] @ 0x40 + + return HAL_OK; + 8004bea: 2300 movs r3, #0 + 8004bec: e000 b.n 8004bf0 + } + else + { + return HAL_BUSY; + 8004bee: 2302 movs r3, #2 + } +} + 8004bf0: 4618 mov r0, r3 + 8004bf2: 3718 adds r7, #24 + 8004bf4: 46bd mov sp, r7 + 8004bf6: bd80 pop {r7, pc} + 8004bf8: fe00e800 .word 0xfe00e800 + +08004bfc : + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + 8004bfc: b580 push {r7, lr} + 8004bfe: b088 sub sp, #32 + 8004c00: af02 add r7, sp, #8 + 8004c02: 60f8 str r0, [r7, #12] + 8004c04: 4608 mov r0, r1 + 8004c06: 4611 mov r1, r2 + 8004c08: 461a mov r2, r3 + 8004c0a: 4603 mov r3, r0 + 8004c0c: 817b strh r3, [r7, #10] + 8004c0e: 460b mov r3, r1 + 8004c10: 813b strh r3, [r7, #8] + 8004c12: 4613 mov r3, r2 + 8004c14: 80fb strh r3, [r7, #6] + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + 8004c16: 68fb ldr r3, [r7, #12] + 8004c18: f893 3041 ldrb.w r3, [r3, #65] @ 0x41 + 8004c1c: b2db uxtb r3, r3 + 8004c1e: 2b20 cmp r3, #32 + 8004c20: f040 80fd bne.w 8004e1e + { + if ((pData == NULL) || (Size == 0U)) + 8004c24: 6a3b ldr r3, [r7, #32] + 8004c26: 2b00 cmp r3, #0 + 8004c28: d002 beq.n 8004c30 + 8004c2a: 8cbb ldrh r3, [r7, #36] @ 0x24 + 8004c2c: 2b00 cmp r3, #0 + 8004c2e: d105 bne.n 8004c3c + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + 8004c30: 68fb ldr r3, [r7, #12] + 8004c32: f44f 7200 mov.w r2, #512 @ 0x200 + 8004c36: 645a str r2, [r3, #68] @ 0x44 + return HAL_ERROR; + 8004c38: 2301 movs r3, #1 + 8004c3a: e0f1 b.n 8004e20 + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + 8004c3c: 68fb ldr r3, [r7, #12] + 8004c3e: f893 3040 ldrb.w r3, [r3, #64] @ 0x40 + 8004c42: 2b01 cmp r3, #1 + 8004c44: d101 bne.n 8004c4a + 8004c46: 2302 movs r3, #2 + 8004c48: e0ea b.n 8004e20 + 8004c4a: 68fb ldr r3, [r7, #12] + 8004c4c: 2201 movs r2, #1 + 8004c4e: f883 2040 strb.w r2, [r3, #64] @ 0x40 + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + 8004c52: f7ff fa63 bl 800411c + 8004c56: 6178 str r0, [r7, #20] + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + 8004c58: 697b ldr r3, [r7, #20] + 8004c5a: 9300 str r3, [sp, #0] + 8004c5c: 2319 movs r3, #25 + 8004c5e: 2201 movs r2, #1 + 8004c60: f44f 4100 mov.w r1, #32768 @ 0x8000 + 8004c64: 68f8 ldr r0, [r7, #12] + 8004c66: f000 f9af bl 8004fc8 + 8004c6a: 4603 mov r3, r0 + 8004c6c: 2b00 cmp r3, #0 + 8004c6e: d001 beq.n 8004c74 + { + return HAL_ERROR; + 8004c70: 2301 movs r3, #1 + 8004c72: e0d5 b.n 8004e20 + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + 8004c74: 68fb ldr r3, [r7, #12] + 8004c76: 2222 movs r2, #34 @ 0x22 + 8004c78: f883 2041 strb.w r2, [r3, #65] @ 0x41 + hi2c->Mode = HAL_I2C_MODE_MEM; + 8004c7c: 68fb ldr r3, [r7, #12] + 8004c7e: 2240 movs r2, #64 @ 0x40 + 8004c80: f883 2042 strb.w r2, [r3, #66] @ 0x42 + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + 8004c84: 68fb ldr r3, [r7, #12] + 8004c86: 2200 movs r2, #0 + 8004c88: 645a str r2, [r3, #68] @ 0x44 + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + 8004c8a: 68fb ldr r3, [r7, #12] + 8004c8c: 6a3a ldr r2, [r7, #32] + 8004c8e: 625a str r2, [r3, #36] @ 0x24 + hi2c->XferCount = Size; + 8004c90: 68fb ldr r3, [r7, #12] + 8004c92: 8cba ldrh r2, [r7, #36] @ 0x24 + 8004c94: 855a strh r2, [r3, #42] @ 0x2a + hi2c->XferISR = NULL; + 8004c96: 68fb ldr r3, [r7, #12] + 8004c98: 2200 movs r2, #0 + 8004c9a: 635a str r2, [r3, #52] @ 0x34 + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + 8004c9c: 88f8 ldrh r0, [r7, #6] + 8004c9e: 893a ldrh r2, [r7, #8] + 8004ca0: 8979 ldrh r1, [r7, #10] + 8004ca2: 697b ldr r3, [r7, #20] + 8004ca4: 9301 str r3, [sp, #4] + 8004ca6: 6abb ldr r3, [r7, #40] @ 0x28 + 8004ca8: 9300 str r3, [sp, #0] + 8004caa: 4603 mov r3, r0 + 8004cac: 68f8 ldr r0, [r7, #12] + 8004cae: f000 f913 bl 8004ed8 + 8004cb2: 4603 mov r3, r0 + 8004cb4: 2b00 cmp r3, #0 + 8004cb6: d005 beq.n 8004cc4 + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + 8004cb8: 68fb ldr r3, [r7, #12] + 8004cba: 2200 movs r2, #0 + 8004cbc: f883 2040 strb.w r2, [r3, #64] @ 0x40 + return HAL_ERROR; + 8004cc0: 2301 movs r3, #1 + 8004cc2: e0ad b.n 8004e20 + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + 8004cc4: 68fb ldr r3, [r7, #12] + 8004cc6: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004cc8: b29b uxth r3, r3 + 8004cca: 2bff cmp r3, #255 @ 0xff + 8004ccc: d90e bls.n 8004cec + { + hi2c->XferSize = 1U; + 8004cce: 68fb ldr r3, [r7, #12] + 8004cd0: 2201 movs r2, #1 + 8004cd2: 851a strh r2, [r3, #40] @ 0x28 + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + 8004cd4: 68fb ldr r3, [r7, #12] + 8004cd6: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004cd8: b2da uxtb r2, r3 + 8004cda: 8979 ldrh r1, [r7, #10] + 8004cdc: 4b52 ldr r3, [pc, #328] @ (8004e28 ) + 8004cde: 9300 str r3, [sp, #0] + 8004ce0: f04f 7380 mov.w r3, #16777216 @ 0x1000000 + 8004ce4: 68f8 ldr r0, [r7, #12] + 8004ce6: f000 fb33 bl 8005350 + 8004cea: e00f b.n 8004d0c + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + 8004cec: 68fb ldr r3, [r7, #12] + 8004cee: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004cf0: b29a uxth r2, r3 + 8004cf2: 68fb ldr r3, [r7, #12] + 8004cf4: 851a strh r2, [r3, #40] @ 0x28 + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + 8004cf6: 68fb ldr r3, [r7, #12] + 8004cf8: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004cfa: b2da uxtb r2, r3 + 8004cfc: 8979 ldrh r1, [r7, #10] + 8004cfe: 4b4a ldr r3, [pc, #296] @ (8004e28 ) + 8004d00: 9300 str r3, [sp, #0] + 8004d02: f04f 7300 mov.w r3, #33554432 @ 0x2000000 + 8004d06: 68f8 ldr r0, [r7, #12] + 8004d08: f000 fb22 bl 8005350 + } + + do + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + 8004d0c: 697b ldr r3, [r7, #20] + 8004d0e: 9300 str r3, [sp, #0] + 8004d10: 6abb ldr r3, [r7, #40] @ 0x28 + 8004d12: 2200 movs r2, #0 + 8004d14: 2104 movs r1, #4 + 8004d16: 68f8 ldr r0, [r7, #12] + 8004d18: f000 f956 bl 8004fc8 + 8004d1c: 4603 mov r3, r0 + 8004d1e: 2b00 cmp r3, #0 + 8004d20: d001 beq.n 8004d26 + { + return HAL_ERROR; + 8004d22: 2301 movs r3, #1 + 8004d24: e07c b.n 8004e20 + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + 8004d26: 68fb ldr r3, [r7, #12] + 8004d28: 681b ldr r3, [r3, #0] + 8004d2a: 6a5a ldr r2, [r3, #36] @ 0x24 + 8004d2c: 68fb ldr r3, [r7, #12] + 8004d2e: 6a5b ldr r3, [r3, #36] @ 0x24 + 8004d30: b2d2 uxtb r2, r2 + 8004d32: 701a strb r2, [r3, #0] + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + 8004d34: 68fb ldr r3, [r7, #12] + 8004d36: 6a5b ldr r3, [r3, #36] @ 0x24 + 8004d38: 1c5a adds r2, r3, #1 + 8004d3a: 68fb ldr r3, [r7, #12] + 8004d3c: 625a str r2, [r3, #36] @ 0x24 + + hi2c->XferSize--; + 8004d3e: 68fb ldr r3, [r7, #12] + 8004d40: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004d42: 3b01 subs r3, #1 + 8004d44: b29a uxth r2, r3 + 8004d46: 68fb ldr r3, [r7, #12] + 8004d48: 851a strh r2, [r3, #40] @ 0x28 + hi2c->XferCount--; + 8004d4a: 68fb ldr r3, [r7, #12] + 8004d4c: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004d4e: b29b uxth r3, r3 + 8004d50: 3b01 subs r3, #1 + 8004d52: b29a uxth r2, r3 + 8004d54: 68fb ldr r3, [r7, #12] + 8004d56: 855a strh r2, [r3, #42] @ 0x2a + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + 8004d58: 68fb ldr r3, [r7, #12] + 8004d5a: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004d5c: b29b uxth r3, r3 + 8004d5e: 2b00 cmp r3, #0 + 8004d60: d034 beq.n 8004dcc + 8004d62: 68fb ldr r3, [r7, #12] + 8004d64: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004d66: 2b00 cmp r3, #0 + 8004d68: d130 bne.n 8004dcc + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + 8004d6a: 697b ldr r3, [r7, #20] + 8004d6c: 9300 str r3, [sp, #0] + 8004d6e: 6abb ldr r3, [r7, #40] @ 0x28 + 8004d70: 2200 movs r2, #0 + 8004d72: 2180 movs r1, #128 @ 0x80 + 8004d74: 68f8 ldr r0, [r7, #12] + 8004d76: f000 f927 bl 8004fc8 + 8004d7a: 4603 mov r3, r0 + 8004d7c: 2b00 cmp r3, #0 + 8004d7e: d001 beq.n 8004d84 + { + return HAL_ERROR; + 8004d80: 2301 movs r3, #1 + 8004d82: e04d b.n 8004e20 + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + 8004d84: 68fb ldr r3, [r7, #12] + 8004d86: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004d88: b29b uxth r3, r3 + 8004d8a: 2bff cmp r3, #255 @ 0xff + 8004d8c: d90e bls.n 8004dac + { + hi2c->XferSize = 1U; + 8004d8e: 68fb ldr r3, [r7, #12] + 8004d90: 2201 movs r2, #1 + 8004d92: 851a strh r2, [r3, #40] @ 0x28 + I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, + 8004d94: 68fb ldr r3, [r7, #12] + 8004d96: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004d98: b2da uxtb r2, r3 + 8004d9a: 8979 ldrh r1, [r7, #10] + 8004d9c: 2300 movs r3, #0 + 8004d9e: 9300 str r3, [sp, #0] + 8004da0: f04f 7380 mov.w r3, #16777216 @ 0x1000000 + 8004da4: 68f8 ldr r0, [r7, #12] + 8004da6: f000 fad3 bl 8005350 + 8004daa: e00f b.n 8004dcc + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + 8004dac: 68fb ldr r3, [r7, #12] + 8004dae: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004db0: b29a uxth r2, r3 + 8004db2: 68fb ldr r3, [r7, #12] + 8004db4: 851a strh r2, [r3, #40] @ 0x28 + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + 8004db6: 68fb ldr r3, [r7, #12] + 8004db8: 8d1b ldrh r3, [r3, #40] @ 0x28 + 8004dba: b2da uxtb r2, r3 + 8004dbc: 8979 ldrh r1, [r7, #10] + 8004dbe: 2300 movs r3, #0 + 8004dc0: 9300 str r3, [sp, #0] + 8004dc2: f04f 7300 mov.w r3, #33554432 @ 0x2000000 + 8004dc6: 68f8 ldr r0, [r7, #12] + 8004dc8: f000 fac2 bl 8005350 + I2C_NO_STARTSTOP); + } + } + } while (hi2c->XferCount > 0U); + 8004dcc: 68fb ldr r3, [r7, #12] + 8004dce: 8d5b ldrh r3, [r3, #42] @ 0x2a + 8004dd0: b29b uxth r3, r3 + 8004dd2: 2b00 cmp r3, #0 + 8004dd4: d19a bne.n 8004d0c + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + 8004dd6: 697a ldr r2, [r7, #20] + 8004dd8: 6ab9 ldr r1, [r7, #40] @ 0x28 + 8004dda: 68f8 ldr r0, [r7, #12] + 8004ddc: f000 f994 bl 8005108 + 8004de0: 4603 mov r3, r0 + 8004de2: 2b00 cmp r3, #0 + 8004de4: d001 beq.n 8004dea + { + return HAL_ERROR; + 8004de6: 2301 movs r3, #1 + 8004de8: e01a b.n 8004e20 + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + 8004dea: 68fb ldr r3, [r7, #12] + 8004dec: 681b ldr r3, [r3, #0] + 8004dee: 2220 movs r2, #32 + 8004df0: 61da str r2, [r3, #28] + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + 8004df2: 68fb ldr r3, [r7, #12] + 8004df4: 681b ldr r3, [r3, #0] + 8004df6: 6859 ldr r1, [r3, #4] + 8004df8: 68fb ldr r3, [r7, #12] + 8004dfa: 681a ldr r2, [r3, #0] + 8004dfc: 4b0b ldr r3, [pc, #44] @ (8004e2c ) + 8004dfe: 400b ands r3, r1 + 8004e00: 6053 str r3, [r2, #4] + + hi2c->State = HAL_I2C_STATE_READY; + 8004e02: 68fb ldr r3, [r7, #12] + 8004e04: 2220 movs r2, #32 + 8004e06: f883 2041 strb.w r2, [r3, #65] @ 0x41 + hi2c->Mode = HAL_I2C_MODE_NONE; + 8004e0a: 68fb ldr r3, [r7, #12] + 8004e0c: 2200 movs r2, #0 + 8004e0e: f883 2042 strb.w r2, [r3, #66] @ 0x42 + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + 8004e12: 68fb ldr r3, [r7, #12] + 8004e14: 2200 movs r2, #0 + 8004e16: f883 2040 strb.w r2, [r3, #64] @ 0x40 + + return HAL_OK; + 8004e1a: 2300 movs r3, #0 + 8004e1c: e000 b.n 8004e20 + } + else + { + return HAL_BUSY; + 8004e1e: 2302 movs r3, #2 + } +} + 8004e20: 4618 mov r0, r3 + 8004e22: 3718 adds r7, #24 + 8004e24: 46bd mov sp, r7 + 8004e26: bd80 pop {r7, pc} + 8004e28: 80002400 .word 0x80002400 + 8004e2c: fe00e800 .word 0xfe00e800 + +08004e30 : + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + 8004e30: b580 push {r7, lr} + 8004e32: b086 sub sp, #24 + 8004e34: af02 add r7, sp, #8 + 8004e36: 60f8 str r0, [r7, #12] + 8004e38: 4608 mov r0, r1 + 8004e3a: 4611 mov r1, r2 + 8004e3c: 461a mov r2, r3 + 8004e3e: 4603 mov r3, r0 + 8004e40: 817b strh r3, [r7, #10] + 8004e42: 460b mov r3, r1 + 8004e44: 813b strh r3, [r7, #8] + 8004e46: 4613 mov r3, r2 + 8004e48: 80fb strh r3, [r7, #6] + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + 8004e4a: 88fb ldrh r3, [r7, #6] + 8004e4c: b2da uxtb r2, r3 + 8004e4e: 8979 ldrh r1, [r7, #10] + 8004e50: 4b20 ldr r3, [pc, #128] @ (8004ed4 ) + 8004e52: 9300 str r3, [sp, #0] + 8004e54: f04f 7380 mov.w r3, #16777216 @ 0x1000000 + 8004e58: 68f8 ldr r0, [r7, #12] + 8004e5a: f000 fa79 bl 8005350 + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + 8004e5e: 69fa ldr r2, [r7, #28] + 8004e60: 69b9 ldr r1, [r7, #24] + 8004e62: 68f8 ldr r0, [r7, #12] + 8004e64: f000 f909 bl 800507a + 8004e68: 4603 mov r3, r0 + 8004e6a: 2b00 cmp r3, #0 + 8004e6c: d001 beq.n 8004e72 + { + return HAL_ERROR; + 8004e6e: 2301 movs r3, #1 + 8004e70: e02c b.n 8004ecc + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + 8004e72: 88fb ldrh r3, [r7, #6] + 8004e74: 2b01 cmp r3, #1 + 8004e76: d105 bne.n 8004e84 + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + 8004e78: 893b ldrh r3, [r7, #8] + 8004e7a: b2da uxtb r2, r3 + 8004e7c: 68fb ldr r3, [r7, #12] + 8004e7e: 681b ldr r3, [r3, #0] + 8004e80: 629a str r2, [r3, #40] @ 0x28 + 8004e82: e015 b.n 8004eb0 + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + 8004e84: 893b ldrh r3, [r7, #8] + 8004e86: 0a1b lsrs r3, r3, #8 + 8004e88: b29b uxth r3, r3 + 8004e8a: b2da uxtb r2, r3 + 8004e8c: 68fb ldr r3, [r7, #12] + 8004e8e: 681b ldr r3, [r3, #0] + 8004e90: 629a str r2, [r3, #40] @ 0x28 + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + 8004e92: 69fa ldr r2, [r7, #28] + 8004e94: 69b9 ldr r1, [r7, #24] + 8004e96: 68f8 ldr r0, [r7, #12] + 8004e98: f000 f8ef bl 800507a + 8004e9c: 4603 mov r3, r0 + 8004e9e: 2b00 cmp r3, #0 + 8004ea0: d001 beq.n 8004ea6 + { + return HAL_ERROR; + 8004ea2: 2301 movs r3, #1 + 8004ea4: e012 b.n 8004ecc + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + 8004ea6: 893b ldrh r3, [r7, #8] + 8004ea8: b2da uxtb r2, r3 + 8004eaa: 68fb ldr r3, [r7, #12] + 8004eac: 681b ldr r3, [r3, #0] + 8004eae: 629a str r2, [r3, #40] @ 0x28 + } + + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) + 8004eb0: 69fb ldr r3, [r7, #28] + 8004eb2: 9300 str r3, [sp, #0] + 8004eb4: 69bb ldr r3, [r7, #24] + 8004eb6: 2200 movs r2, #0 + 8004eb8: 2180 movs r1, #128 @ 0x80 + 8004eba: 68f8 ldr r0, [r7, #12] + 8004ebc: f000 f884 bl 8004fc8 + 8004ec0: 4603 mov r3, r0 + 8004ec2: 2b00 cmp r3, #0 + 8004ec4: d001 beq.n 8004eca + { + return HAL_ERROR; + 8004ec6: 2301 movs r3, #1 + 8004ec8: e000 b.n 8004ecc + } + + return HAL_OK; + 8004eca: 2300 movs r3, #0 +} + 8004ecc: 4618 mov r0, r3 + 8004ece: 3710 adds r7, #16 + 8004ed0: 46bd mov sp, r7 + 8004ed2: bd80 pop {r7, pc} + 8004ed4: 80002000 .word 0x80002000 + +08004ed8 : + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + 8004ed8: b580 push {r7, lr} + 8004eda: b086 sub sp, #24 + 8004edc: af02 add r7, sp, #8 + 8004ede: 60f8 str r0, [r7, #12] + 8004ee0: 4608 mov r0, r1 + 8004ee2: 4611 mov r1, r2 + 8004ee4: 461a mov r2, r3 + 8004ee6: 4603 mov r3, r0 + 8004ee8: 817b strh r3, [r7, #10] + 8004eea: 460b mov r3, r1 + 8004eec: 813b strh r3, [r7, #8] + 8004eee: 4613 mov r3, r2 + 8004ef0: 80fb strh r3, [r7, #6] + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + 8004ef2: 88fb ldrh r3, [r7, #6] + 8004ef4: b2da uxtb r2, r3 + 8004ef6: 8979 ldrh r1, [r7, #10] + 8004ef8: 4b20 ldr r3, [pc, #128] @ (8004f7c ) + 8004efa: 9300 str r3, [sp, #0] + 8004efc: 2300 movs r3, #0 + 8004efe: 68f8 ldr r0, [r7, #12] + 8004f00: f000 fa26 bl 8005350 + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + 8004f04: 69fa ldr r2, [r7, #28] + 8004f06: 69b9 ldr r1, [r7, #24] + 8004f08: 68f8 ldr r0, [r7, #12] + 8004f0a: f000 f8b6 bl 800507a + 8004f0e: 4603 mov r3, r0 + 8004f10: 2b00 cmp r3, #0 + 8004f12: d001 beq.n 8004f18 + { + return HAL_ERROR; + 8004f14: 2301 movs r3, #1 + 8004f16: e02c b.n 8004f72 + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + 8004f18: 88fb ldrh r3, [r7, #6] + 8004f1a: 2b01 cmp r3, #1 + 8004f1c: d105 bne.n 8004f2a + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + 8004f1e: 893b ldrh r3, [r7, #8] + 8004f20: b2da uxtb r2, r3 + 8004f22: 68fb ldr r3, [r7, #12] + 8004f24: 681b ldr r3, [r3, #0] + 8004f26: 629a str r2, [r3, #40] @ 0x28 + 8004f28: e015 b.n 8004f56 + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + 8004f2a: 893b ldrh r3, [r7, #8] + 8004f2c: 0a1b lsrs r3, r3, #8 + 8004f2e: b29b uxth r3, r3 + 8004f30: b2da uxtb r2, r3 + 8004f32: 68fb ldr r3, [r7, #12] + 8004f34: 681b ldr r3, [r3, #0] + 8004f36: 629a str r2, [r3, #40] @ 0x28 + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + 8004f38: 69fa ldr r2, [r7, #28] + 8004f3a: 69b9 ldr r1, [r7, #24] + 8004f3c: 68f8 ldr r0, [r7, #12] + 8004f3e: f000 f89c bl 800507a + 8004f42: 4603 mov r3, r0 + 8004f44: 2b00 cmp r3, #0 + 8004f46: d001 beq.n 8004f4c + { + return HAL_ERROR; + 8004f48: 2301 movs r3, #1 + 8004f4a: e012 b.n 8004f72 + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + 8004f4c: 893b ldrh r3, [r7, #8] + 8004f4e: b2da uxtb r2, r3 + 8004f50: 68fb ldr r3, [r7, #12] + 8004f52: 681b ldr r3, [r3, #0] + 8004f54: 629a str r2, [r3, #40] @ 0x28 + } + + /* Wait until TC flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) + 8004f56: 69fb ldr r3, [r7, #28] + 8004f58: 9300 str r3, [sp, #0] + 8004f5a: 69bb ldr r3, [r7, #24] + 8004f5c: 2200 movs r2, #0 + 8004f5e: 2140 movs r1, #64 @ 0x40 + 8004f60: 68f8 ldr r0, [r7, #12] + 8004f62: f000 f831 bl 8004fc8 + 8004f66: 4603 mov r3, r0 + 8004f68: 2b00 cmp r3, #0 + 8004f6a: d001 beq.n 8004f70 + { + return HAL_ERROR; + 8004f6c: 2301 movs r3, #1 + 8004f6e: e000 b.n 8004f72 + } + + return HAL_OK; + 8004f70: 2300 movs r3, #0 +} + 8004f72: 4618 mov r0, r3 + 8004f74: 3710 adds r7, #16 + 8004f76: 46bd mov sp, r7 + 8004f78: bd80 pop {r7, pc} + 8004f7a: bf00 nop + 8004f7c: 80002000 .word 0x80002000 + +08004f80 : + * @brief I2C Tx data register flush process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) +{ + 8004f80: b480 push {r7} + 8004f82: b083 sub sp, #12 + 8004f84: af00 add r7, sp, #0 + 8004f86: 6078 str r0, [r7, #4] + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) + 8004f88: 687b ldr r3, [r7, #4] + 8004f8a: 681b ldr r3, [r3, #0] + 8004f8c: 699b ldr r3, [r3, #24] + 8004f8e: f003 0302 and.w r3, r3, #2 + 8004f92: 2b02 cmp r3, #2 + 8004f94: d103 bne.n 8004f9e + { + hi2c->Instance->TXDR = 0x00U; + 8004f96: 687b ldr r3, [r7, #4] + 8004f98: 681b ldr r3, [r3, #0] + 8004f9a: 2200 movs r2, #0 + 8004f9c: 629a str r2, [r3, #40] @ 0x28 + } + + /* Flush TX register if not empty */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + 8004f9e: 687b ldr r3, [r7, #4] + 8004fa0: 681b ldr r3, [r3, #0] + 8004fa2: 699b ldr r3, [r3, #24] + 8004fa4: f003 0301 and.w r3, r3, #1 + 8004fa8: 2b01 cmp r3, #1 + 8004faa: d007 beq.n 8004fbc + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); + 8004fac: 687b ldr r3, [r7, #4] + 8004fae: 681b ldr r3, [r3, #0] + 8004fb0: 699a ldr r2, [r3, #24] + 8004fb2: 687b ldr r3, [r7, #4] + 8004fb4: 681b ldr r3, [r3, #0] + 8004fb6: f042 0201 orr.w r2, r2, #1 + 8004fba: 619a str r2, [r3, #24] + } +} + 8004fbc: bf00 nop + 8004fbe: 370c adds r7, #12 + 8004fc0: 46bd mov sp, r7 + 8004fc2: f85d 7b04 ldr.w r7, [sp], #4 + 8004fc6: 4770 bx lr + +08004fc8 : + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart) +{ + 8004fc8: b580 push {r7, lr} + 8004fca: b084 sub sp, #16 + 8004fcc: af00 add r7, sp, #0 + 8004fce: 60f8 str r0, [r7, #12] + 8004fd0: 60b9 str r1, [r7, #8] + 8004fd2: 603b str r3, [r7, #0] + 8004fd4: 4613 mov r3, r2 + 8004fd6: 71fb strb r3, [r7, #7] + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + 8004fd8: e03b b.n 8005052 + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + 8004fda: 69ba ldr r2, [r7, #24] + 8004fdc: 6839 ldr r1, [r7, #0] + 8004fde: 68f8 ldr r0, [r7, #12] + 8004fe0: f000 f8d6 bl 8005190 + 8004fe4: 4603 mov r3, r0 + 8004fe6: 2b00 cmp r3, #0 + 8004fe8: d001 beq.n 8004fee + { + return HAL_ERROR; + 8004fea: 2301 movs r3, #1 + 8004fec: e041 b.n 8005072 + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + 8004fee: 683b ldr r3, [r7, #0] + 8004ff0: f1b3 3fff cmp.w r3, #4294967295 + 8004ff4: d02d beq.n 8005052 + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + 8004ff6: f7ff f891 bl 800411c + 8004ffa: 4602 mov r2, r0 + 8004ffc: 69bb ldr r3, [r7, #24] + 8004ffe: 1ad3 subs r3, r2, r3 + 8005000: 683a ldr r2, [r7, #0] + 8005002: 429a cmp r2, r3 + 8005004: d302 bcc.n 800500c + 8005006: 683b ldr r3, [r7, #0] + 8005008: 2b00 cmp r3, #0 + 800500a: d122 bne.n 8005052 + { + if ((__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)) + 800500c: 68fb ldr r3, [r7, #12] + 800500e: 681b ldr r3, [r3, #0] + 8005010: 699a ldr r2, [r3, #24] + 8005012: 68bb ldr r3, [r7, #8] + 8005014: 4013 ands r3, r2 + 8005016: 68ba ldr r2, [r7, #8] + 8005018: 429a cmp r2, r3 + 800501a: bf0c ite eq + 800501c: 2301 moveq r3, #1 + 800501e: 2300 movne r3, #0 + 8005020: b2db uxtb r3, r3 + 8005022: 461a mov r2, r3 + 8005024: 79fb ldrb r3, [r7, #7] + 8005026: 429a cmp r2, r3 + 8005028: d113 bne.n 8005052 + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + 800502a: 68fb ldr r3, [r7, #12] + 800502c: 6c5b ldr r3, [r3, #68] @ 0x44 + 800502e: f043 0220 orr.w r2, r3, #32 + 8005032: 68fb ldr r3, [r7, #12] + 8005034: 645a str r2, [r3, #68] @ 0x44 + hi2c->State = HAL_I2C_STATE_READY; + 8005036: 68fb ldr r3, [r7, #12] + 8005038: 2220 movs r2, #32 + 800503a: f883 2041 strb.w r2, [r3, #65] @ 0x41 + hi2c->Mode = HAL_I2C_MODE_NONE; + 800503e: 68fb ldr r3, [r7, #12] + 8005040: 2200 movs r2, #0 + 8005042: f883 2042 strb.w r2, [r3, #66] @ 0x42 + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + 8005046: 68fb ldr r3, [r7, #12] + 8005048: 2200 movs r2, #0 + 800504a: f883 2040 strb.w r2, [r3, #64] @ 0x40 + return HAL_ERROR; + 800504e: 2301 movs r3, #1 + 8005050: e00f b.n 8005072 + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + 8005052: 68fb ldr r3, [r7, #12] + 8005054: 681b ldr r3, [r3, #0] + 8005056: 699a ldr r2, [r3, #24] + 8005058: 68bb ldr r3, [r7, #8] + 800505a: 4013 ands r3, r2 + 800505c: 68ba ldr r2, [r7, #8] + 800505e: 429a cmp r2, r3 + 8005060: bf0c ite eq + 8005062: 2301 moveq r3, #1 + 8005064: 2300 movne r3, #0 + 8005066: b2db uxtb r3, r3 + 8005068: 461a mov r2, r3 + 800506a: 79fb ldrb r3, [r7, #7] + 800506c: 429a cmp r2, r3 + 800506e: d0b4 beq.n 8004fda + } + } + } + } + return HAL_OK; + 8005070: 2300 movs r3, #0 +} + 8005072: 4618 mov r0, r3 + 8005074: 3710 adds r7, #16 + 8005076: 46bd mov sp, r7 + 8005078: bd80 pop {r7, pc} + +0800507a : + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + 800507a: b580 push {r7, lr} + 800507c: b084 sub sp, #16 + 800507e: af00 add r7, sp, #0 + 8005080: 60f8 str r0, [r7, #12] + 8005082: 60b9 str r1, [r7, #8] + 8005084: 607a str r2, [r7, #4] + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + 8005086: e033 b.n 80050f0 + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + 8005088: 687a ldr r2, [r7, #4] + 800508a: 68b9 ldr r1, [r7, #8] + 800508c: 68f8 ldr r0, [r7, #12] + 800508e: f000 f87f bl 8005190 + 8005092: 4603 mov r3, r0 + 8005094: 2b00 cmp r3, #0 + 8005096: d001 beq.n 800509c + { + return HAL_ERROR; + 8005098: 2301 movs r3, #1 + 800509a: e031 b.n 8005100 + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + 800509c: 68bb ldr r3, [r7, #8] + 800509e: f1b3 3fff cmp.w r3, #4294967295 + 80050a2: d025 beq.n 80050f0 + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + 80050a4: f7ff f83a bl 800411c + 80050a8: 4602 mov r2, r0 + 80050aa: 687b ldr r3, [r7, #4] + 80050ac: 1ad3 subs r3, r2, r3 + 80050ae: 68ba ldr r2, [r7, #8] + 80050b0: 429a cmp r2, r3 + 80050b2: d302 bcc.n 80050ba + 80050b4: 68bb ldr r3, [r7, #8] + 80050b6: 2b00 cmp r3, #0 + 80050b8: d11a bne.n 80050f0 + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)) + 80050ba: 68fb ldr r3, [r7, #12] + 80050bc: 681b ldr r3, [r3, #0] + 80050be: 699b ldr r3, [r3, #24] + 80050c0: f003 0302 and.w r3, r3, #2 + 80050c4: 2b02 cmp r3, #2 + 80050c6: d013 beq.n 80050f0 + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + 80050c8: 68fb ldr r3, [r7, #12] + 80050ca: 6c5b ldr r3, [r3, #68] @ 0x44 + 80050cc: f043 0220 orr.w r2, r3, #32 + 80050d0: 68fb ldr r3, [r7, #12] + 80050d2: 645a str r2, [r3, #68] @ 0x44 + hi2c->State = HAL_I2C_STATE_READY; + 80050d4: 68fb ldr r3, [r7, #12] + 80050d6: 2220 movs r2, #32 + 80050d8: f883 2041 strb.w r2, [r3, #65] @ 0x41 + hi2c->Mode = HAL_I2C_MODE_NONE; + 80050dc: 68fb ldr r3, [r7, #12] + 80050de: 2200 movs r2, #0 + 80050e0: f883 2042 strb.w r2, [r3, #66] @ 0x42 + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + 80050e4: 68fb ldr r3, [r7, #12] + 80050e6: 2200 movs r2, #0 + 80050e8: f883 2040 strb.w r2, [r3, #64] @ 0x40 + + return HAL_ERROR; + 80050ec: 2301 movs r3, #1 + 80050ee: e007 b.n 8005100 + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + 80050f0: 68fb ldr r3, [r7, #12] + 80050f2: 681b ldr r3, [r3, #0] + 80050f4: 699b ldr r3, [r3, #24] + 80050f6: f003 0302 and.w r3, r3, #2 + 80050fa: 2b02 cmp r3, #2 + 80050fc: d1c4 bne.n 8005088 + } + } + } + } + return HAL_OK; + 80050fe: 2300 movs r3, #0 +} + 8005100: 4618 mov r0, r3 + 8005102: 3710 adds r7, #16 + 8005104: 46bd mov sp, r7 + 8005106: bd80 pop {r7, pc} + +08005108 : + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + 8005108: b580 push {r7, lr} + 800510a: b084 sub sp, #16 + 800510c: af00 add r7, sp, #0 + 800510e: 60f8 str r0, [r7, #12] + 8005110: 60b9 str r1, [r7, #8] + 8005112: 607a str r2, [r7, #4] + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + 8005114: e02f b.n 8005176 + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + 8005116: 687a ldr r2, [r7, #4] + 8005118: 68b9 ldr r1, [r7, #8] + 800511a: 68f8 ldr r0, [r7, #12] + 800511c: f000 f838 bl 8005190 + 8005120: 4603 mov r3, r0 + 8005122: 2b00 cmp r3, #0 + 8005124: d001 beq.n 800512a + { + return HAL_ERROR; + 8005126: 2301 movs r3, #1 + 8005128: e02d b.n 8005186 + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + 800512a: f7fe fff7 bl 800411c + 800512e: 4602 mov r2, r0 + 8005130: 687b ldr r3, [r7, #4] + 8005132: 1ad3 subs r3, r2, r3 + 8005134: 68ba ldr r2, [r7, #8] + 8005136: 429a cmp r2, r3 + 8005138: d302 bcc.n 8005140 + 800513a: 68bb ldr r3, [r7, #8] + 800513c: 2b00 cmp r3, #0 + 800513e: d11a bne.n 8005176 + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)) + 8005140: 68fb ldr r3, [r7, #12] + 8005142: 681b ldr r3, [r3, #0] + 8005144: 699b ldr r3, [r3, #24] + 8005146: f003 0320 and.w r3, r3, #32 + 800514a: 2b20 cmp r3, #32 + 800514c: d013 beq.n 8005176 + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + 800514e: 68fb ldr r3, [r7, #12] + 8005150: 6c5b ldr r3, [r3, #68] @ 0x44 + 8005152: f043 0220 orr.w r2, r3, #32 + 8005156: 68fb ldr r3, [r7, #12] + 8005158: 645a str r2, [r3, #68] @ 0x44 + hi2c->State = HAL_I2C_STATE_READY; + 800515a: 68fb ldr r3, [r7, #12] + 800515c: 2220 movs r2, #32 + 800515e: f883 2041 strb.w r2, [r3, #65] @ 0x41 + hi2c->Mode = HAL_I2C_MODE_NONE; + 8005162: 68fb ldr r3, [r7, #12] + 8005164: 2200 movs r2, #0 + 8005166: f883 2042 strb.w r2, [r3, #66] @ 0x42 + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + 800516a: 68fb ldr r3, [r7, #12] + 800516c: 2200 movs r2, #0 + 800516e: f883 2040 strb.w r2, [r3, #64] @ 0x40 + + return HAL_ERROR; + 8005172: 2301 movs r3, #1 + 8005174: e007 b.n 8005186 + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + 8005176: 68fb ldr r3, [r7, #12] + 8005178: 681b ldr r3, [r3, #0] + 800517a: 699b ldr r3, [r3, #24] + 800517c: f003 0320 and.w r3, r3, #32 + 8005180: 2b20 cmp r3, #32 + 8005182: d1c8 bne.n 8005116 + } + } + } + return HAL_OK; + 8005184: 2300 movs r3, #0 +} + 8005186: 4618 mov r0, r3 + 8005188: 3710 adds r7, #16 + 800518a: 46bd mov sp, r7 + 800518c: bd80 pop {r7, pc} + ... + +08005190 : + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + 8005190: b580 push {r7, lr} + 8005192: b08a sub sp, #40 @ 0x28 + 8005194: af00 add r7, sp, #0 + 8005196: 60f8 str r0, [r7, #12] + 8005198: 60b9 str r1, [r7, #8] + 800519a: 607a str r2, [r7, #4] + HAL_StatusTypeDef status = HAL_OK; + 800519c: 2300 movs r3, #0 + 800519e: f887 3027 strb.w r3, [r7, #39] @ 0x27 + uint32_t itflag = hi2c->Instance->ISR; + 80051a2: 68fb ldr r3, [r7, #12] + 80051a4: 681b ldr r3, [r3, #0] + 80051a6: 699b ldr r3, [r3, #24] + 80051a8: 61bb str r3, [r7, #24] + uint32_t error_code = 0; + 80051aa: 2300 movs r3, #0 + 80051ac: 623b str r3, [r7, #32] + uint32_t tickstart = Tickstart; + 80051ae: 687b ldr r3, [r7, #4] + 80051b0: 61fb str r3, [r7, #28] + uint32_t tmp1; + HAL_I2C_ModeTypeDef tmp2; + + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_AF)) + 80051b2: 69bb ldr r3, [r7, #24] + 80051b4: f003 0310 and.w r3, r3, #16 + 80051b8: 2b00 cmp r3, #0 + 80051ba: d068 beq.n 800528e + { + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + 80051bc: 68fb ldr r3, [r7, #12] + 80051be: 681b ldr r3, [r3, #0] + 80051c0: 2210 movs r2, #16 + 80051c2: 61da str r2, [r3, #28] + + /* Wait until STOP Flag is set or timeout occurred */ + /* AutoEnd should be initiate after AF */ + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (status == HAL_OK)) + 80051c4: e049 b.n 800525a + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + 80051c6: 68bb ldr r3, [r7, #8] + 80051c8: f1b3 3fff cmp.w r3, #4294967295 + 80051cc: d045 beq.n 800525a + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + 80051ce: f7fe ffa5 bl 800411c + 80051d2: 4602 mov r2, r0 + 80051d4: 69fb ldr r3, [r7, #28] + 80051d6: 1ad3 subs r3, r2, r3 + 80051d8: 68ba ldr r2, [r7, #8] + 80051da: 429a cmp r2, r3 + 80051dc: d302 bcc.n 80051e4 + 80051de: 68bb ldr r3, [r7, #8] + 80051e0: 2b00 cmp r3, #0 + 80051e2: d13a bne.n 800525a + { + tmp1 = (uint32_t)(hi2c->Instance->CR2 & I2C_CR2_STOP); + 80051e4: 68fb ldr r3, [r7, #12] + 80051e6: 681b ldr r3, [r3, #0] + 80051e8: 685b ldr r3, [r3, #4] + 80051ea: f403 4380 and.w r3, r3, #16384 @ 0x4000 + 80051ee: 617b str r3, [r7, #20] + tmp2 = hi2c->Mode; + 80051f0: 68fb ldr r3, [r7, #12] + 80051f2: f893 3042 ldrb.w r3, [r3, #66] @ 0x42 + 80051f6: 74fb strb r3, [r7, #19] + + /* In case of I2C still busy, try to regenerate a STOP manually */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET) && \ + 80051f8: 68fb ldr r3, [r7, #12] + 80051fa: 681b ldr r3, [r3, #0] + 80051fc: 699b ldr r3, [r3, #24] + 80051fe: f403 4300 and.w r3, r3, #32768 @ 0x8000 + 8005202: f5b3 4f00 cmp.w r3, #32768 @ 0x8000 + 8005206: d121 bne.n 800524c + 8005208: 697b ldr r3, [r7, #20] + 800520a: f5b3 4f80 cmp.w r3, #16384 @ 0x4000 + 800520e: d01d beq.n 800524c + (tmp1 != I2C_CR2_STOP) && \ + 8005210: 7cfb ldrb r3, [r7, #19] + 8005212: 2b20 cmp r3, #32 + 8005214: d01a beq.n 800524c + (tmp2 != HAL_I2C_MODE_SLAVE)) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + 8005216: 68fb ldr r3, [r7, #12] + 8005218: 681b ldr r3, [r3, #0] + 800521a: 685a ldr r2, [r3, #4] + 800521c: 68fb ldr r3, [r7, #12] + 800521e: 681b ldr r3, [r3, #0] + 8005220: f442 4280 orr.w r2, r2, #16384 @ 0x4000 + 8005224: 605a str r2, [r3, #4] + + /* Update Tick with new reference */ + tickstart = HAL_GetTick(); + 8005226: f7fe ff79 bl 800411c + 800522a: 61f8 str r0, [r7, #28] + } + + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + 800522c: e00e b.n 800524c + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > I2C_TIMEOUT_STOPF) + 800522e: f7fe ff75 bl 800411c + 8005232: 4602 mov r2, r0 + 8005234: 69fb ldr r3, [r7, #28] + 8005236: 1ad3 subs r3, r2, r3 + 8005238: 2b19 cmp r3, #25 + 800523a: d907 bls.n 800524c + { + error_code |= HAL_I2C_ERROR_TIMEOUT; + 800523c: 6a3b ldr r3, [r7, #32] + 800523e: f043 0320 orr.w r3, r3, #32 + 8005242: 623b str r3, [r7, #32] + + status = HAL_ERROR; + 8005244: 2301 movs r3, #1 + 8005246: f887 3027 strb.w r3, [r7, #39] @ 0x27 + + break; + 800524a: e006 b.n 800525a + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + 800524c: 68fb ldr r3, [r7, #12] + 800524e: 681b ldr r3, [r3, #0] + 8005250: 699b ldr r3, [r3, #24] + 8005252: f003 0320 and.w r3, r3, #32 + 8005256: 2b20 cmp r3, #32 + 8005258: d1e9 bne.n 800522e + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (status == HAL_OK)) + 800525a: 68fb ldr r3, [r7, #12] + 800525c: 681b ldr r3, [r3, #0] + 800525e: 699b ldr r3, [r3, #24] + 8005260: f003 0320 and.w r3, r3, #32 + 8005264: 2b20 cmp r3, #32 + 8005266: d003 beq.n 8005270 + 8005268: f897 3027 ldrb.w r3, [r7, #39] @ 0x27 + 800526c: 2b00 cmp r3, #0 + 800526e: d0aa beq.n 80051c6 + } + } + } + + /* In case STOP Flag is detected, clear it */ + if (status == HAL_OK) + 8005270: f897 3027 ldrb.w r3, [r7, #39] @ 0x27 + 8005274: 2b00 cmp r3, #0 + 8005276: d103 bne.n 8005280 + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + 8005278: 68fb ldr r3, [r7, #12] + 800527a: 681b ldr r3, [r3, #0] + 800527c: 2220 movs r2, #32 + 800527e: 61da str r2, [r3, #28] + } + + error_code |= HAL_I2C_ERROR_AF; + 8005280: 6a3b ldr r3, [r7, #32] + 8005282: f043 0304 orr.w r3, r3, #4 + 8005286: 623b str r3, [r7, #32] + + status = HAL_ERROR; + 8005288: 2301 movs r3, #1 + 800528a: f887 3027 strb.w r3, [r7, #39] @ 0x27 + } + + /* Refresh Content of Status register */ + itflag = hi2c->Instance->ISR; + 800528e: 68fb ldr r3, [r7, #12] + 8005290: 681b ldr r3, [r3, #0] + 8005292: 699b ldr r3, [r3, #24] + 8005294: 61bb str r3, [r7, #24] + + /* Then verify if an additional errors occurs */ + /* Check if a Bus error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_BERR)) + 8005296: 69bb ldr r3, [r7, #24] + 8005298: f403 7380 and.w r3, r3, #256 @ 0x100 + 800529c: 2b00 cmp r3, #0 + 800529e: d00b beq.n 80052b8 + { + error_code |= HAL_I2C_ERROR_BERR; + 80052a0: 6a3b ldr r3, [r7, #32] + 80052a2: f043 0301 orr.w r3, r3, #1 + 80052a6: 623b str r3, [r7, #32] + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + 80052a8: 68fb ldr r3, [r7, #12] + 80052aa: 681b ldr r3, [r3, #0] + 80052ac: f44f 7280 mov.w r2, #256 @ 0x100 + 80052b0: 61da str r2, [r3, #28] + + status = HAL_ERROR; + 80052b2: 2301 movs r3, #1 + 80052b4: f887 3027 strb.w r3, [r7, #39] @ 0x27 + } + + /* Check if an Over-Run/Under-Run error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_OVR)) + 80052b8: 69bb ldr r3, [r7, #24] + 80052ba: f403 6380 and.w r3, r3, #1024 @ 0x400 + 80052be: 2b00 cmp r3, #0 + 80052c0: d00b beq.n 80052da + { + error_code |= HAL_I2C_ERROR_OVR; + 80052c2: 6a3b ldr r3, [r7, #32] + 80052c4: f043 0308 orr.w r3, r3, #8 + 80052c8: 623b str r3, [r7, #32] + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + 80052ca: 68fb ldr r3, [r7, #12] + 80052cc: 681b ldr r3, [r3, #0] + 80052ce: f44f 6280 mov.w r2, #1024 @ 0x400 + 80052d2: 61da str r2, [r3, #28] + + status = HAL_ERROR; + 80052d4: 2301 movs r3, #1 + 80052d6: f887 3027 strb.w r3, [r7, #39] @ 0x27 + } + + /* Check if an Arbitration Loss error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_ARLO)) + 80052da: 69bb ldr r3, [r7, #24] + 80052dc: f403 7300 and.w r3, r3, #512 @ 0x200 + 80052e0: 2b00 cmp r3, #0 + 80052e2: d00b beq.n 80052fc + { + error_code |= HAL_I2C_ERROR_ARLO; + 80052e4: 6a3b ldr r3, [r7, #32] + 80052e6: f043 0302 orr.w r3, r3, #2 + 80052ea: 623b str r3, [r7, #32] + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + 80052ec: 68fb ldr r3, [r7, #12] + 80052ee: 681b ldr r3, [r3, #0] + 80052f0: f44f 7200 mov.w r2, #512 @ 0x200 + 80052f4: 61da str r2, [r3, #28] + + status = HAL_ERROR; + 80052f6: 2301 movs r3, #1 + 80052f8: f887 3027 strb.w r3, [r7, #39] @ 0x27 + } + + if (status != HAL_OK) + 80052fc: f897 3027 ldrb.w r3, [r7, #39] @ 0x27 + 8005300: 2b00 cmp r3, #0 + 8005302: d01c beq.n 800533e + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + 8005304: 68f8 ldr r0, [r7, #12] + 8005306: f7ff fe3b bl 8004f80 + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + 800530a: 68fb ldr r3, [r7, #12] + 800530c: 681b ldr r3, [r3, #0] + 800530e: 6859 ldr r1, [r3, #4] + 8005310: 68fb ldr r3, [r7, #12] + 8005312: 681a ldr r2, [r3, #0] + 8005314: 4b0d ldr r3, [pc, #52] @ (800534c ) + 8005316: 400b ands r3, r1 + 8005318: 6053 str r3, [r2, #4] + + hi2c->ErrorCode |= error_code; + 800531a: 68fb ldr r3, [r7, #12] + 800531c: 6c5a ldr r2, [r3, #68] @ 0x44 + 800531e: 6a3b ldr r3, [r7, #32] + 8005320: 431a orrs r2, r3 + 8005322: 68fb ldr r3, [r7, #12] + 8005324: 645a str r2, [r3, #68] @ 0x44 + hi2c->State = HAL_I2C_STATE_READY; + 8005326: 68fb ldr r3, [r7, #12] + 8005328: 2220 movs r2, #32 + 800532a: f883 2041 strb.w r2, [r3, #65] @ 0x41 + hi2c->Mode = HAL_I2C_MODE_NONE; + 800532e: 68fb ldr r3, [r7, #12] + 8005330: 2200 movs r2, #0 + 8005332: f883 2042 strb.w r2, [r3, #66] @ 0x42 + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + 8005336: 68fb ldr r3, [r7, #12] + 8005338: 2200 movs r2, #0 + 800533a: f883 2040 strb.w r2, [r3, #64] @ 0x40 + } + + return status; + 800533e: f897 3027 ldrb.w r3, [r7, #39] @ 0x27 +} + 8005342: 4618 mov r0, r3 + 8005344: 3728 adds r7, #40 @ 0x28 + 8005346: 46bd mov sp, r7 + 8005348: bd80 pop {r7, pc} + 800534a: bf00 nop + 800534c: fe00e800 .word 0xfe00e800 + +08005350 : + * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request) +{ + 8005350: b480 push {r7} + 8005352: b087 sub sp, #28 + 8005354: af00 add r7, sp, #0 + 8005356: 60f8 str r0, [r7, #12] + 8005358: 607b str r3, [r7, #4] + 800535a: 460b mov r3, r1 + 800535c: 817b strh r3, [r7, #10] + 800535e: 4613 mov r3, r2 + 8005360: 727b strb r3, [r7, #9] + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_TRANSFER_MODE(Mode)); + assert_param(IS_TRANSFER_REQUEST(Request)); + + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + 8005362: 897b ldrh r3, [r7, #10] + 8005364: f3c3 0209 ubfx r2, r3, #0, #10 + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + 8005368: 7a7b ldrb r3, [r7, #9] + 800536a: 041b lsls r3, r3, #16 + 800536c: f403 037f and.w r3, r3, #16711680 @ 0xff0000 + uint32_t tmp = ((uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + 8005370: 431a orrs r2, r3 + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + 8005372: 687b ldr r3, [r7, #4] + 8005374: 431a orrs r2, r3 + uint32_t tmp = ((uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + 8005376: 6a3b ldr r3, [r7, #32] + 8005378: 4313 orrs r3, r2 + 800537a: f023 4300 bic.w r3, r3, #2147483648 @ 0x80000000 + 800537e: 617b str r3, [r7, #20] + (uint32_t)Mode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(hi2c->Instance->CR2, \ + 8005380: 68fb ldr r3, [r7, #12] + 8005382: 681b ldr r3, [r3, #0] + 8005384: 685a ldr r2, [r3, #4] + 8005386: 6a3b ldr r3, [r7, #32] + 8005388: 0d5b lsrs r3, r3, #21 + 800538a: f403 6180 and.w r1, r3, #1024 @ 0x400 + 800538e: 4b08 ldr r3, [pc, #32] @ (80053b0 ) + 8005390: 430b orrs r3, r1 + 8005392: 43db mvns r3, r3 + 8005394: ea02 0103 and.w r1, r2, r3 + 8005398: 68fb ldr r3, [r7, #12] + 800539a: 681b ldr r3, [r3, #0] + 800539c: 697a ldr r2, [r7, #20] + 800539e: 430a orrs r2, r1 + 80053a0: 605a str r2, [r3, #4] + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | \ + I2C_CR2_START | I2C_CR2_STOP)), tmp); +} + 80053a2: bf00 nop + 80053a4: 371c adds r7, #28 + 80053a6: 46bd mov sp, r7 + 80053a8: f85d 7b04 ldr.w r7, [sp], #4 + 80053ac: 4770 bx lr + 80053ae: bf00 nop + 80053b0: 03ff63ff .word 0x03ff63ff + +080053b4 : + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter New state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + 80053b4: b480 push {r7} + 80053b6: b083 sub sp, #12 + 80053b8: af00 add r7, sp, #0 + 80053ba: 6078 str r0, [r7, #4] + 80053bc: 6039 str r1, [r7, #0] + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + 80053be: 687b ldr r3, [r7, #4] + 80053c0: f893 3041 ldrb.w r3, [r3, #65] @ 0x41 + 80053c4: b2db uxtb r3, r3 + 80053c6: 2b20 cmp r3, #32 + 80053c8: d138 bne.n 800543c + { + /* Process Locked */ + __HAL_LOCK(hi2c); + 80053ca: 687b ldr r3, [r7, #4] + 80053cc: f893 3040 ldrb.w r3, [r3, #64] @ 0x40 + 80053d0: 2b01 cmp r3, #1 + 80053d2: d101 bne.n 80053d8 + 80053d4: 2302 movs r3, #2 + 80053d6: e032 b.n 800543e + 80053d8: 687b ldr r3, [r7, #4] + 80053da: 2201 movs r2, #1 + 80053dc: f883 2040 strb.w r2, [r3, #64] @ 0x40 + + hi2c->State = HAL_I2C_STATE_BUSY; + 80053e0: 687b ldr r3, [r7, #4] + 80053e2: 2224 movs r2, #36 @ 0x24 + 80053e4: f883 2041 strb.w r2, [r3, #65] @ 0x41 + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + 80053e8: 687b ldr r3, [r7, #4] + 80053ea: 681b ldr r3, [r3, #0] + 80053ec: 681a ldr r2, [r3, #0] + 80053ee: 687b ldr r3, [r7, #4] + 80053f0: 681b ldr r3, [r3, #0] + 80053f2: f022 0201 bic.w r2, r2, #1 + 80053f6: 601a str r2, [r3, #0] + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + 80053f8: 687b ldr r3, [r7, #4] + 80053fa: 681b ldr r3, [r3, #0] + 80053fc: 681a ldr r2, [r3, #0] + 80053fe: 687b ldr r3, [r7, #4] + 8005400: 681b ldr r3, [r3, #0] + 8005402: f422 5280 bic.w r2, r2, #4096 @ 0x1000 + 8005406: 601a str r2, [r3, #0] + + /* Set analog filter bit*/ + hi2c->Instance->CR1 |= AnalogFilter; + 8005408: 687b ldr r3, [r7, #4] + 800540a: 681b ldr r3, [r3, #0] + 800540c: 6819 ldr r1, [r3, #0] + 800540e: 687b ldr r3, [r7, #4] + 8005410: 681b ldr r3, [r3, #0] + 8005412: 683a ldr r2, [r7, #0] + 8005414: 430a orrs r2, r1 + 8005416: 601a str r2, [r3, #0] + + __HAL_I2C_ENABLE(hi2c); + 8005418: 687b ldr r3, [r7, #4] + 800541a: 681b ldr r3, [r3, #0] + 800541c: 681a ldr r2, [r3, #0] + 800541e: 687b ldr r3, [r7, #4] + 8005420: 681b ldr r3, [r3, #0] + 8005422: f042 0201 orr.w r2, r2, #1 + 8005426: 601a str r2, [r3, #0] + + hi2c->State = HAL_I2C_STATE_READY; + 8005428: 687b ldr r3, [r7, #4] + 800542a: 2220 movs r2, #32 + 800542c: f883 2041 strb.w r2, [r3, #65] @ 0x41 + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + 8005430: 687b ldr r3, [r7, #4] + 8005432: 2200 movs r2, #0 + 8005434: f883 2040 strb.w r2, [r3, #64] @ 0x40 + + return HAL_OK; + 8005438: 2300 movs r3, #0 + 800543a: e000 b.n 800543e + } + else + { + return HAL_BUSY; + 800543c: 2302 movs r3, #2 + } +} + 800543e: 4618 mov r0, r3 + 8005440: 370c adds r7, #12 + 8005442: 46bd mov sp, r7 + 8005444: f85d 7b04 ldr.w r7, [sp], #4 + 8005448: 4770 bx lr + +0800544a : + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + 800544a: b480 push {r7} + 800544c: b085 sub sp, #20 + 800544e: af00 add r7, sp, #0 + 8005450: 6078 str r0, [r7, #4] + 8005452: 6039 str r1, [r7, #0] + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + 8005454: 687b ldr r3, [r7, #4] + 8005456: f893 3041 ldrb.w r3, [r3, #65] @ 0x41 + 800545a: b2db uxtb r3, r3 + 800545c: 2b20 cmp r3, #32 + 800545e: d139 bne.n 80054d4 + { + /* Process Locked */ + __HAL_LOCK(hi2c); + 8005460: 687b ldr r3, [r7, #4] + 8005462: f893 3040 ldrb.w r3, [r3, #64] @ 0x40 + 8005466: 2b01 cmp r3, #1 + 8005468: d101 bne.n 800546e + 800546a: 2302 movs r3, #2 + 800546c: e033 b.n 80054d6 + 800546e: 687b ldr r3, [r7, #4] + 8005470: 2201 movs r2, #1 + 8005472: f883 2040 strb.w r2, [r3, #64] @ 0x40 + + hi2c->State = HAL_I2C_STATE_BUSY; + 8005476: 687b ldr r3, [r7, #4] + 8005478: 2224 movs r2, #36 @ 0x24 + 800547a: f883 2041 strb.w r2, [r3, #65] @ 0x41 + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + 800547e: 687b ldr r3, [r7, #4] + 8005480: 681b ldr r3, [r3, #0] + 8005482: 681a ldr r2, [r3, #0] + 8005484: 687b ldr r3, [r7, #4] + 8005486: 681b ldr r3, [r3, #0] + 8005488: f022 0201 bic.w r2, r2, #1 + 800548c: 601a str r2, [r3, #0] + + /* Get the old register value */ + tmpreg = hi2c->Instance->CR1; + 800548e: 687b ldr r3, [r7, #4] + 8005490: 681b ldr r3, [r3, #0] + 8005492: 681b ldr r3, [r3, #0] + 8005494: 60fb str r3, [r7, #12] + + /* Reset I2Cx DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + 8005496: 68fb ldr r3, [r7, #12] + 8005498: f423 6370 bic.w r3, r3, #3840 @ 0xf00 + 800549c: 60fb str r3, [r7, #12] + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << 8U; + 800549e: 683b ldr r3, [r7, #0] + 80054a0: 021b lsls r3, r3, #8 + 80054a2: 68fa ldr r2, [r7, #12] + 80054a4: 4313 orrs r3, r2 + 80054a6: 60fb str r3, [r7, #12] + + /* Store the new register value */ + hi2c->Instance->CR1 = tmpreg; + 80054a8: 687b ldr r3, [r7, #4] + 80054aa: 681b ldr r3, [r3, #0] + 80054ac: 68fa ldr r2, [r7, #12] + 80054ae: 601a str r2, [r3, #0] + + __HAL_I2C_ENABLE(hi2c); + 80054b0: 687b ldr r3, [r7, #4] + 80054b2: 681b ldr r3, [r3, #0] + 80054b4: 681a ldr r2, [r3, #0] + 80054b6: 687b ldr r3, [r7, #4] + 80054b8: 681b ldr r3, [r3, #0] + 80054ba: f042 0201 orr.w r2, r2, #1 + 80054be: 601a str r2, [r3, #0] + + hi2c->State = HAL_I2C_STATE_READY; + 80054c0: 687b ldr r3, [r7, #4] + 80054c2: 2220 movs r2, #32 + 80054c4: f883 2041 strb.w r2, [r3, #65] @ 0x41 + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + 80054c8: 687b ldr r3, [r7, #4] + 80054ca: 2200 movs r2, #0 + 80054cc: f883 2040 strb.w r2, [r3, #64] @ 0x40 + + return HAL_OK; + 80054d0: 2300 movs r3, #0 + 80054d2: e000 b.n 80054d6 + } + else + { + return HAL_BUSY; + 80054d4: 2302 movs r3, #2 + } +} + 80054d6: 4618 mov r0, r3 + 80054d8: 3714 adds r7, #20 + 80054da: 46bd mov sp, r7 + 80054dc: f85d 7b04 ldr.w r7, [sp], #4 + 80054e0: 4770 bx lr + ... + +080054e4 : + * @brief Return Voltage Scaling Range. + * @retval VOS bit field (PWR_REGULATOR_VOLTAGE_SCALE1 or PWR_REGULATOR_VOLTAGE_SCALE2 + * or PWR_REGULATOR_VOLTAGE_SCALE1_BOOST when applicable) + */ +uint32_t HAL_PWREx_GetVoltageRange(void) +{ + 80054e4: b480 push {r7} + 80054e6: af00 add r7, sp, #0 + else + { + return PWR_REGULATOR_VOLTAGE_SCALE1_BOOST; + } +#else + return (PWR->CR1 & PWR_CR1_VOS); + 80054e8: 4b04 ldr r3, [pc, #16] @ (80054fc ) + 80054ea: 681b ldr r3, [r3, #0] + 80054ec: f403 63c0 and.w r3, r3, #1536 @ 0x600 +#endif +} + 80054f0: 4618 mov r0, r3 + 80054f2: 46bd mov sp, r7 + 80054f4: f85d 7b04 ldr.w r7, [sp], #4 + 80054f8: 4770 bx lr + 80054fa: bf00 nop + 80054fc: 40007000 .word 0x40007000 + +08005500 : + * cleared before returning the status. If the flag is not cleared within + * 50 microseconds, HAL_TIMEOUT status is reported. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) +{ + 8005500: b480 push {r7} + 8005502: b085 sub sp, #20 + 8005504: af00 add r7, sp, #0 + 8005506: 6078 str r0, [r7, #4] + } + +#else + + /* If Set Range 1 */ + if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1) + 8005508: 687b ldr r3, [r7, #4] + 800550a: f5b3 7f00 cmp.w r3, #512 @ 0x200 + 800550e: d130 bne.n 8005572 + { + if (READ_BIT(PWR->CR1, PWR_CR1_VOS) != PWR_REGULATOR_VOLTAGE_SCALE1) + 8005510: 4b23 ldr r3, [pc, #140] @ (80055a0 ) + 8005512: 681b ldr r3, [r3, #0] + 8005514: f403 63c0 and.w r3, r3, #1536 @ 0x600 + 8005518: f5b3 7f00 cmp.w r3, #512 @ 0x200 + 800551c: d038 beq.n 8005590 + { + /* Set Range 1 */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); + 800551e: 4b20 ldr r3, [pc, #128] @ (80055a0 ) + 8005520: 681b ldr r3, [r3, #0] + 8005522: f423 63c0 bic.w r3, r3, #1536 @ 0x600 + 8005526: 4a1e ldr r2, [pc, #120] @ (80055a0 ) + 8005528: f443 7300 orr.w r3, r3, #512 @ 0x200 + 800552c: 6013 str r3, [r2, #0] + + /* Wait until VOSF is cleared */ + wait_loop_index = ((PWR_FLAG_SETTING_DELAY_US * SystemCoreClock) / 1000000U) + 1U; + 800552e: 4b1d ldr r3, [pc, #116] @ (80055a4 ) + 8005530: 681b ldr r3, [r3, #0] + 8005532: 2232 movs r2, #50 @ 0x32 + 8005534: fb02 f303 mul.w r3, r2, r3 + 8005538: 4a1b ldr r2, [pc, #108] @ (80055a8 ) + 800553a: fba2 2303 umull r2, r3, r2, r3 + 800553e: 0c9b lsrs r3, r3, #18 + 8005540: 3301 adds r3, #1 + 8005542: 60fb str r3, [r7, #12] + while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) && (wait_loop_index != 0U)) + 8005544: e002 b.n 800554c + { + wait_loop_index--; + 8005546: 68fb ldr r3, [r7, #12] + 8005548: 3b01 subs r3, #1 + 800554a: 60fb str r3, [r7, #12] + while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) && (wait_loop_index != 0U)) + 800554c: 4b14 ldr r3, [pc, #80] @ (80055a0 ) + 800554e: 695b ldr r3, [r3, #20] + 8005550: f403 6380 and.w r3, r3, #1024 @ 0x400 + 8005554: f5b3 6f80 cmp.w r3, #1024 @ 0x400 + 8005558: d102 bne.n 8005560 + 800555a: 68fb ldr r3, [r7, #12] + 800555c: 2b00 cmp r3, #0 + 800555e: d1f2 bne.n 8005546 + } + if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) + 8005560: 4b0f ldr r3, [pc, #60] @ (80055a0 ) + 8005562: 695b ldr r3, [r3, #20] + 8005564: f403 6380 and.w r3, r3, #1024 @ 0x400 + 8005568: f5b3 6f80 cmp.w r3, #1024 @ 0x400 + 800556c: d110 bne.n 8005590 + { + return HAL_TIMEOUT; + 800556e: 2303 movs r3, #3 + 8005570: e00f b.n 8005592 + } + } + } + else + { + if (READ_BIT(PWR->CR1, PWR_CR1_VOS) != PWR_REGULATOR_VOLTAGE_SCALE2) + 8005572: 4b0b ldr r3, [pc, #44] @ (80055a0 ) + 8005574: 681b ldr r3, [r3, #0] + 8005576: f403 63c0 and.w r3, r3, #1536 @ 0x600 + 800557a: f5b3 6f80 cmp.w r3, #1024 @ 0x400 + 800557e: d007 beq.n 8005590 + { + /* Set Range 2 */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE2); + 8005580: 4b07 ldr r3, [pc, #28] @ (80055a0 ) + 8005582: 681b ldr r3, [r3, #0] + 8005584: f423 63c0 bic.w r3, r3, #1536 @ 0x600 + 8005588: 4a05 ldr r2, [pc, #20] @ (80055a0 ) + 800558a: f443 6380 orr.w r3, r3, #1024 @ 0x400 + 800558e: 6013 str r3, [r2, #0] + /* No need to wait for VOSF to be cleared for this transition */ + } + } +#endif + + return HAL_OK; + 8005590: 2300 movs r3, #0 +} + 8005592: 4618 mov r0, r3 + 8005594: 3714 adds r7, #20 + 8005596: 46bd mov sp, r7 + 8005598: f85d 7b04 ldr.w r7, [sp], #4 + 800559c: 4770 bx lr + 800559e: bf00 nop + 80055a0: 40007000 .word 0x40007000 + 80055a4: 20000000 .word 0x20000000 + 80055a8: 431bde83 .word 0x431bde83 + +080055ac : + * @note If HSE failed to start, HSE should be disabled before recalling + HAL_RCC_OscConfig(). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + 80055ac: b580 push {r7, lr} + 80055ae: b088 sub sp, #32 + 80055b0: af00 add r7, sp, #0 + 80055b2: 6078 str r0, [r7, #4] + uint32_t tickstart; + HAL_StatusTypeDef status; + uint32_t sysclk_source, pll_config; + + /* Check Null pointer */ + if(RCC_OscInitStruct == NULL) + 80055b4: 687b ldr r3, [r7, #4] + 80055b6: 2b00 cmp r3, #0 + 80055b8: d102 bne.n 80055c0 + { + return HAL_ERROR; + 80055ba: 2301 movs r3, #1 + 80055bc: f000 bc02 b.w 8005dc4 + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + sysclk_source = __HAL_RCC_GET_SYSCLK_SOURCE(); + 80055c0: 4b96 ldr r3, [pc, #600] @ (800581c ) + 80055c2: 689b ldr r3, [r3, #8] + 80055c4: f003 030c and.w r3, r3, #12 + 80055c8: 61bb str r3, [r7, #24] + pll_config = __HAL_RCC_GET_PLL_OSCSOURCE(); + 80055ca: 4b94 ldr r3, [pc, #592] @ (800581c ) + 80055cc: 68db ldr r3, [r3, #12] + 80055ce: f003 0303 and.w r3, r3, #3 + 80055d2: 617b str r3, [r7, #20] + + /*----------------------------- MSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_MSI) == RCC_OSCILLATORTYPE_MSI) + 80055d4: 687b ldr r3, [r7, #4] + 80055d6: 681b ldr r3, [r3, #0] + 80055d8: f003 0310 and.w r3, r3, #16 + 80055dc: 2b00 cmp r3, #0 + 80055de: f000 80e4 beq.w 80057aa + assert_param(IS_RCC_MSI(RCC_OscInitStruct->MSIState)); + assert_param(IS_RCC_MSICALIBRATION_VALUE(RCC_OscInitStruct->MSICalibrationValue)); + assert_param(IS_RCC_MSI_CLOCK_RANGE(RCC_OscInitStruct->MSIClockRange)); + + /* Check if MSI is used as system clock or as PLL source when PLL is selected as system clock */ + if((sysclk_source == RCC_CFGR_SWS_MSI) || + 80055e2: 69bb ldr r3, [r7, #24] + 80055e4: 2b00 cmp r3, #0 + 80055e6: d007 beq.n 80055f8 + 80055e8: 69bb ldr r3, [r7, #24] + 80055ea: 2b0c cmp r3, #12 + 80055ec: f040 808b bne.w 8005706 + ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_config == RCC_PLLSOURCE_MSI))) + 80055f0: 697b ldr r3, [r7, #20] + 80055f2: 2b01 cmp r3, #1 + 80055f4: f040 8087 bne.w 8005706 + { + if((READ_BIT(RCC->CR, RCC_CR_MSIRDY) != 0U) && (RCC_OscInitStruct->MSIState == RCC_MSI_OFF)) + 80055f8: 4b88 ldr r3, [pc, #544] @ (800581c ) + 80055fa: 681b ldr r3, [r3, #0] + 80055fc: f003 0302 and.w r3, r3, #2 + 8005600: 2b00 cmp r3, #0 + 8005602: d005 beq.n 8005610 + 8005604: 687b ldr r3, [r7, #4] + 8005606: 699b ldr r3, [r3, #24] + 8005608: 2b00 cmp r3, #0 + 800560a: d101 bne.n 8005610 + { + return HAL_ERROR; + 800560c: 2301 movs r3, #1 + 800560e: e3d9 b.n 8005dc4 + else + { + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) and the supply voltage of the device. */ + if(RCC_OscInitStruct->MSIClockRange > __HAL_RCC_GET_MSI_RANGE()) + 8005610: 687b ldr r3, [r7, #4] + 8005612: 6a1a ldr r2, [r3, #32] + 8005614: 4b81 ldr r3, [pc, #516] @ (800581c ) + 8005616: 681b ldr r3, [r3, #0] + 8005618: f003 0308 and.w r3, r3, #8 + 800561c: 2b00 cmp r3, #0 + 800561e: d004 beq.n 800562a + 8005620: 4b7e ldr r3, [pc, #504] @ (800581c ) + 8005622: 681b ldr r3, [r3, #0] + 8005624: f003 03f0 and.w r3, r3, #240 @ 0xf0 + 8005628: e005 b.n 8005636 + 800562a: 4b7c ldr r3, [pc, #496] @ (800581c ) + 800562c: f8d3 3094 ldr.w r3, [r3, #148] @ 0x94 + 8005630: 091b lsrs r3, r3, #4 + 8005632: f003 03f0 and.w r3, r3, #240 @ 0xf0 + 8005636: 4293 cmp r3, r2 + 8005638: d223 bcs.n 8005682 + { + /* First increase number of wait states update if necessary */ + if(RCC_SetFlashLatencyFromMSIRange(RCC_OscInitStruct->MSIClockRange) != HAL_OK) + 800563a: 687b ldr r3, [r7, #4] + 800563c: 6a1b ldr r3, [r3, #32] + 800563e: 4618 mov r0, r3 + 8005640: f000 fd8c bl 800615c + 8005644: 4603 mov r3, r0 + 8005646: 2b00 cmp r3, #0 + 8005648: d001 beq.n 800564e + { + return HAL_ERROR; + 800564a: 2301 movs r3, #1 + 800564c: e3ba b.n 8005dc4 + } + + /* Selects the Multiple Speed oscillator (MSI) clock range .*/ + __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); + 800564e: 4b73 ldr r3, [pc, #460] @ (800581c ) + 8005650: 681b ldr r3, [r3, #0] + 8005652: 4a72 ldr r2, [pc, #456] @ (800581c ) + 8005654: f043 0308 orr.w r3, r3, #8 + 8005658: 6013 str r3, [r2, #0] + 800565a: 4b70 ldr r3, [pc, #448] @ (800581c ) + 800565c: 681b ldr r3, [r3, #0] + 800565e: f023 02f0 bic.w r2, r3, #240 @ 0xf0 + 8005662: 687b ldr r3, [r7, #4] + 8005664: 6a1b ldr r3, [r3, #32] + 8005666: 496d ldr r1, [pc, #436] @ (800581c ) + 8005668: 4313 orrs r3, r2 + 800566a: 600b str r3, [r1, #0] + /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ + __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); + 800566c: 4b6b ldr r3, [pc, #428] @ (800581c ) + 800566e: 685b ldr r3, [r3, #4] + 8005670: f423 427f bic.w r2, r3, #65280 @ 0xff00 + 8005674: 687b ldr r3, [r7, #4] + 8005676: 69db ldr r3, [r3, #28] + 8005678: 021b lsls r3, r3, #8 + 800567a: 4968 ldr r1, [pc, #416] @ (800581c ) + 800567c: 4313 orrs r3, r2 + 800567e: 604b str r3, [r1, #4] + 8005680: e025 b.n 80056ce + } + else + { + /* Else, keep current flash latency while decreasing applies */ + /* Selects the Multiple Speed oscillator (MSI) clock range .*/ + __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); + 8005682: 4b66 ldr r3, [pc, #408] @ (800581c ) + 8005684: 681b ldr r3, [r3, #0] + 8005686: 4a65 ldr r2, [pc, #404] @ (800581c ) + 8005688: f043 0308 orr.w r3, r3, #8 + 800568c: 6013 str r3, [r2, #0] + 800568e: 4b63 ldr r3, [pc, #396] @ (800581c ) + 8005690: 681b ldr r3, [r3, #0] + 8005692: f023 02f0 bic.w r2, r3, #240 @ 0xf0 + 8005696: 687b ldr r3, [r7, #4] + 8005698: 6a1b ldr r3, [r3, #32] + 800569a: 4960 ldr r1, [pc, #384] @ (800581c ) + 800569c: 4313 orrs r3, r2 + 800569e: 600b str r3, [r1, #0] + /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ + __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); + 80056a0: 4b5e ldr r3, [pc, #376] @ (800581c ) + 80056a2: 685b ldr r3, [r3, #4] + 80056a4: f423 427f bic.w r2, r3, #65280 @ 0xff00 + 80056a8: 687b ldr r3, [r7, #4] + 80056aa: 69db ldr r3, [r3, #28] + 80056ac: 021b lsls r3, r3, #8 + 80056ae: 495b ldr r1, [pc, #364] @ (800581c ) + 80056b0: 4313 orrs r3, r2 + 80056b2: 604b str r3, [r1, #4] + + /* Decrease number of wait states update if necessary */ + /* Only possible when MSI is the System clock source */ + if(sysclk_source == RCC_CFGR_SWS_MSI) + 80056b4: 69bb ldr r3, [r7, #24] + 80056b6: 2b00 cmp r3, #0 + 80056b8: d109 bne.n 80056ce + { + if(RCC_SetFlashLatencyFromMSIRange(RCC_OscInitStruct->MSIClockRange) != HAL_OK) + 80056ba: 687b ldr r3, [r7, #4] + 80056bc: 6a1b ldr r3, [r3, #32] + 80056be: 4618 mov r0, r3 + 80056c0: f000 fd4c bl 800615c + 80056c4: 4603 mov r3, r0 + 80056c6: 2b00 cmp r3, #0 + 80056c8: d001 beq.n 80056ce + { + return HAL_ERROR; + 80056ca: 2301 movs r3, #1 + 80056cc: e37a b.n 8005dc4 + } + } + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> (AHBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos] & 0x1FU); + 80056ce: f000 fc81 bl 8005fd4 + 80056d2: 4602 mov r2, r0 + 80056d4: 4b51 ldr r3, [pc, #324] @ (800581c ) + 80056d6: 689b ldr r3, [r3, #8] + 80056d8: 091b lsrs r3, r3, #4 + 80056da: f003 030f and.w r3, r3, #15 + 80056de: 4950 ldr r1, [pc, #320] @ (8005820 ) + 80056e0: 5ccb ldrb r3, [r1, r3] + 80056e2: f003 031f and.w r3, r3, #31 + 80056e6: fa22 f303 lsr.w r3, r2, r3 + 80056ea: 4a4e ldr r2, [pc, #312] @ (8005824 ) + 80056ec: 6013 str r3, [r2, #0] + + /* Configure the source of time base considering new system clocks settings*/ + status = HAL_InitTick(uwTickPrio); + 80056ee: 4b4e ldr r3, [pc, #312] @ (8005828 ) + 80056f0: 681b ldr r3, [r3, #0] + 80056f2: 4618 mov r0, r3 + 80056f4: f7fe fcc2 bl 800407c + 80056f8: 4603 mov r3, r0 + 80056fa: 73fb strb r3, [r7, #15] + if(status != HAL_OK) + 80056fc: 7bfb ldrb r3, [r7, #15] + 80056fe: 2b00 cmp r3, #0 + 8005700: d052 beq.n 80057a8 + { + return status; + 8005702: 7bfb ldrb r3, [r7, #15] + 8005704: e35e b.n 8005dc4 + } + } + else + { + /* Check the MSI State */ + if(RCC_OscInitStruct->MSIState != RCC_MSI_OFF) + 8005706: 687b ldr r3, [r7, #4] + 8005708: 699b ldr r3, [r3, #24] + 800570a: 2b00 cmp r3, #0 + 800570c: d032 beq.n 8005774 + { + /* Enable the Internal High Speed oscillator (MSI). */ + __HAL_RCC_MSI_ENABLE(); + 800570e: 4b43 ldr r3, [pc, #268] @ (800581c ) + 8005710: 681b ldr r3, [r3, #0] + 8005712: 4a42 ldr r2, [pc, #264] @ (800581c ) + 8005714: f043 0301 orr.w r3, r3, #1 + 8005718: 6013 str r3, [r2, #0] + + /* Get timeout */ + tickstart = HAL_GetTick(); + 800571a: f7fe fcff bl 800411c + 800571e: 6138 str r0, [r7, #16] + + /* Wait till MSI is ready */ + while(READ_BIT(RCC->CR, RCC_CR_MSIRDY) == 0U) + 8005720: e008 b.n 8005734 + { + if((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) + 8005722: f7fe fcfb bl 800411c + 8005726: 4602 mov r2, r0 + 8005728: 693b ldr r3, [r7, #16] + 800572a: 1ad3 subs r3, r2, r3 + 800572c: 2b02 cmp r3, #2 + 800572e: d901 bls.n 8005734 + { + return HAL_TIMEOUT; + 8005730: 2303 movs r3, #3 + 8005732: e347 b.n 8005dc4 + while(READ_BIT(RCC->CR, RCC_CR_MSIRDY) == 0U) + 8005734: 4b39 ldr r3, [pc, #228] @ (800581c ) + 8005736: 681b ldr r3, [r3, #0] + 8005738: f003 0302 and.w r3, r3, #2 + 800573c: 2b00 cmp r3, #0 + 800573e: d0f0 beq.n 8005722 + } + } + /* Selects the Multiple Speed oscillator (MSI) clock range .*/ + __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); + 8005740: 4b36 ldr r3, [pc, #216] @ (800581c ) + 8005742: 681b ldr r3, [r3, #0] + 8005744: 4a35 ldr r2, [pc, #212] @ (800581c ) + 8005746: f043 0308 orr.w r3, r3, #8 + 800574a: 6013 str r3, [r2, #0] + 800574c: 4b33 ldr r3, [pc, #204] @ (800581c ) + 800574e: 681b ldr r3, [r3, #0] + 8005750: f023 02f0 bic.w r2, r3, #240 @ 0xf0 + 8005754: 687b ldr r3, [r7, #4] + 8005756: 6a1b ldr r3, [r3, #32] + 8005758: 4930 ldr r1, [pc, #192] @ (800581c ) + 800575a: 4313 orrs r3, r2 + 800575c: 600b str r3, [r1, #0] + /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ + __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); + 800575e: 4b2f ldr r3, [pc, #188] @ (800581c ) + 8005760: 685b ldr r3, [r3, #4] + 8005762: f423 427f bic.w r2, r3, #65280 @ 0xff00 + 8005766: 687b ldr r3, [r7, #4] + 8005768: 69db ldr r3, [r3, #28] + 800576a: 021b lsls r3, r3, #8 + 800576c: 492b ldr r1, [pc, #172] @ (800581c ) + 800576e: 4313 orrs r3, r2 + 8005770: 604b str r3, [r1, #4] + 8005772: e01a b.n 80057aa + + } + else + { + /* Disable the Internal High Speed oscillator (MSI). */ + __HAL_RCC_MSI_DISABLE(); + 8005774: 4b29 ldr r3, [pc, #164] @ (800581c ) + 8005776: 681b ldr r3, [r3, #0] + 8005778: 4a28 ldr r2, [pc, #160] @ (800581c ) + 800577a: f023 0301 bic.w r3, r3, #1 + 800577e: 6013 str r3, [r2, #0] + + /* Get timeout */ + tickstart = HAL_GetTick(); + 8005780: f7fe fccc bl 800411c + 8005784: 6138 str r0, [r7, #16] + + /* Wait till MSI is ready */ + while(READ_BIT(RCC->CR, RCC_CR_MSIRDY) != 0U) + 8005786: e008 b.n 800579a + { + if((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) + 8005788: f7fe fcc8 bl 800411c + 800578c: 4602 mov r2, r0 + 800578e: 693b ldr r3, [r7, #16] + 8005790: 1ad3 subs r3, r2, r3 + 8005792: 2b02 cmp r3, #2 + 8005794: d901 bls.n 800579a + { + return HAL_TIMEOUT; + 8005796: 2303 movs r3, #3 + 8005798: e314 b.n 8005dc4 + while(READ_BIT(RCC->CR, RCC_CR_MSIRDY) != 0U) + 800579a: 4b20 ldr r3, [pc, #128] @ (800581c ) + 800579c: 681b ldr r3, [r3, #0] + 800579e: f003 0302 and.w r3, r3, #2 + 80057a2: 2b00 cmp r3, #0 + 80057a4: d1f0 bne.n 8005788 + 80057a6: e000 b.n 80057aa + if((READ_BIT(RCC->CR, RCC_CR_MSIRDY) != 0U) && (RCC_OscInitStruct->MSIState == RCC_MSI_OFF)) + 80057a8: bf00 nop + } + } + } + } + /*------------------------------- HSE Configuration ------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + 80057aa: 687b ldr r3, [r7, #4] + 80057ac: 681b ldr r3, [r3, #0] + 80057ae: f003 0301 and.w r3, r3, #1 + 80057b2: 2b00 cmp r3, #0 + 80057b4: d073 beq.n 800589e + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if((sysclk_source == RCC_CFGR_SWS_HSE) || + 80057b6: 69bb ldr r3, [r7, #24] + 80057b8: 2b08 cmp r3, #8 + 80057ba: d005 beq.n 80057c8 + 80057bc: 69bb ldr r3, [r7, #24] + 80057be: 2b0c cmp r3, #12 + 80057c0: d10e bne.n 80057e0 + ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_config == RCC_PLLSOURCE_HSE))) + 80057c2: 697b ldr r3, [r7, #20] + 80057c4: 2b03 cmp r3, #3 + 80057c6: d10b bne.n 80057e0 + { + if((READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + 80057c8: 4b14 ldr r3, [pc, #80] @ (800581c ) + 80057ca: 681b ldr r3, [r3, #0] + 80057cc: f403 3300 and.w r3, r3, #131072 @ 0x20000 + 80057d0: 2b00 cmp r3, #0 + 80057d2: d063 beq.n 800589c + 80057d4: 687b ldr r3, [r7, #4] + 80057d6: 685b ldr r3, [r3, #4] + 80057d8: 2b00 cmp r3, #0 + 80057da: d15f bne.n 800589c + { + return HAL_ERROR; + 80057dc: 2301 movs r3, #1 + 80057de: e2f1 b.n 8005dc4 + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + 80057e0: 687b ldr r3, [r7, #4] + 80057e2: 685b ldr r3, [r3, #4] + 80057e4: f5b3 3f80 cmp.w r3, #65536 @ 0x10000 + 80057e8: d106 bne.n 80057f8 + 80057ea: 4b0c ldr r3, [pc, #48] @ (800581c ) + 80057ec: 681b ldr r3, [r3, #0] + 80057ee: 4a0b ldr r2, [pc, #44] @ (800581c ) + 80057f0: f443 3380 orr.w r3, r3, #65536 @ 0x10000 + 80057f4: 6013 str r3, [r2, #0] + 80057f6: e025 b.n 8005844 + 80057f8: 687b ldr r3, [r7, #4] + 80057fa: 685b ldr r3, [r3, #4] + 80057fc: f5b3 2fa0 cmp.w r3, #327680 @ 0x50000 + 8005800: d114 bne.n 800582c + 8005802: 4b06 ldr r3, [pc, #24] @ (800581c ) + 8005804: 681b ldr r3, [r3, #0] + 8005806: 4a05 ldr r2, [pc, #20] @ (800581c ) + 8005808: f443 2380 orr.w r3, r3, #262144 @ 0x40000 + 800580c: 6013 str r3, [r2, #0] + 800580e: 4b03 ldr r3, [pc, #12] @ (800581c ) + 8005810: 681b ldr r3, [r3, #0] + 8005812: 4a02 ldr r2, [pc, #8] @ (800581c ) + 8005814: f443 3380 orr.w r3, r3, #65536 @ 0x10000 + 8005818: 6013 str r3, [r2, #0] + 800581a: e013 b.n 8005844 + 800581c: 40021000 .word 0x40021000 + 8005820: 0800b8f4 .word 0x0800b8f4 + 8005824: 20000000 .word 0x20000000 + 8005828: 20000004 .word 0x20000004 + 800582c: 4ba0 ldr r3, [pc, #640] @ (8005ab0 ) + 800582e: 681b ldr r3, [r3, #0] + 8005830: 4a9f ldr r2, [pc, #636] @ (8005ab0 ) + 8005832: f423 3380 bic.w r3, r3, #65536 @ 0x10000 + 8005836: 6013 str r3, [r2, #0] + 8005838: 4b9d ldr r3, [pc, #628] @ (8005ab0 ) + 800583a: 681b ldr r3, [r3, #0] + 800583c: 4a9c ldr r2, [pc, #624] @ (8005ab0 ) + 800583e: f423 2380 bic.w r3, r3, #262144 @ 0x40000 + 8005842: 6013 str r3, [r2, #0] + + /* Check the HSE State */ + if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + 8005844: 687b ldr r3, [r7, #4] + 8005846: 685b ldr r3, [r3, #4] + 8005848: 2b00 cmp r3, #0 + 800584a: d013 beq.n 8005874 + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 800584c: f7fe fc66 bl 800411c + 8005850: 6138 str r0, [r7, #16] + + /* Wait till HSE is ready */ + while(READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + 8005852: e008 b.n 8005866 + { + if((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + 8005854: f7fe fc62 bl 800411c + 8005858: 4602 mov r2, r0 + 800585a: 693b ldr r3, [r7, #16] + 800585c: 1ad3 subs r3, r2, r3 + 800585e: 2b64 cmp r3, #100 @ 0x64 + 8005860: d901 bls.n 8005866 + { + return HAL_TIMEOUT; + 8005862: 2303 movs r3, #3 + 8005864: e2ae b.n 8005dc4 + while(READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + 8005866: 4b92 ldr r3, [pc, #584] @ (8005ab0 ) + 8005868: 681b ldr r3, [r3, #0] + 800586a: f403 3300 and.w r3, r3, #131072 @ 0x20000 + 800586e: 2b00 cmp r3, #0 + 8005870: d0f0 beq.n 8005854 + 8005872: e014 b.n 800589e + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 8005874: f7fe fc52 bl 800411c + 8005878: 6138 str r0, [r7, #16] + + /* Wait till HSE is disabled */ + while(READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + 800587a: e008 b.n 800588e + { + if((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + 800587c: f7fe fc4e bl 800411c + 8005880: 4602 mov r2, r0 + 8005882: 693b ldr r3, [r7, #16] + 8005884: 1ad3 subs r3, r2, r3 + 8005886: 2b64 cmp r3, #100 @ 0x64 + 8005888: d901 bls.n 800588e + { + return HAL_TIMEOUT; + 800588a: 2303 movs r3, #3 + 800588c: e29a b.n 8005dc4 + while(READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + 800588e: 4b88 ldr r3, [pc, #544] @ (8005ab0 ) + 8005890: 681b ldr r3, [r3, #0] + 8005892: f403 3300 and.w r3, r3, #131072 @ 0x20000 + 8005896: 2b00 cmp r3, #0 + 8005898: d1f0 bne.n 800587c + 800589a: e000 b.n 800589e + if((READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + 800589c: bf00 nop + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + 800589e: 687b ldr r3, [r7, #4] + 80058a0: 681b ldr r3, [r3, #0] + 80058a2: f003 0302 and.w r3, r3, #2 + 80058a6: 2b00 cmp r3, #0 + 80058a8: d060 beq.n 800596c + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_HSI_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ + if((sysclk_source == RCC_CFGR_SWS_HSI) || + 80058aa: 69bb ldr r3, [r7, #24] + 80058ac: 2b04 cmp r3, #4 + 80058ae: d005 beq.n 80058bc + 80058b0: 69bb ldr r3, [r7, #24] + 80058b2: 2b0c cmp r3, #12 + 80058b4: d119 bne.n 80058ea + ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_config == RCC_PLLSOURCE_HSI))) + 80058b6: 697b ldr r3, [r7, #20] + 80058b8: 2b02 cmp r3, #2 + 80058ba: d116 bne.n 80058ea + { + /* When HSI is used as system clock it will not be disabled */ + if((READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) && (RCC_OscInitStruct->HSIState == RCC_HSI_OFF)) + 80058bc: 4b7c ldr r3, [pc, #496] @ (8005ab0 ) + 80058be: 681b ldr r3, [r3, #0] + 80058c0: f403 6380 and.w r3, r3, #1024 @ 0x400 + 80058c4: 2b00 cmp r3, #0 + 80058c6: d005 beq.n 80058d4 + 80058c8: 687b ldr r3, [r7, #4] + 80058ca: 68db ldr r3, [r3, #12] + 80058cc: 2b00 cmp r3, #0 + 80058ce: d101 bne.n 80058d4 + { + return HAL_ERROR; + 80058d0: 2301 movs r3, #1 + 80058d2: e277 b.n 8005dc4 + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + 80058d4: 4b76 ldr r3, [pc, #472] @ (8005ab0 ) + 80058d6: 685b ldr r3, [r3, #4] + 80058d8: f023 42fe bic.w r2, r3, #2130706432 @ 0x7f000000 + 80058dc: 687b ldr r3, [r7, #4] + 80058de: 691b ldr r3, [r3, #16] + 80058e0: 061b lsls r3, r3, #24 + 80058e2: 4973 ldr r1, [pc, #460] @ (8005ab0 ) + 80058e4: 4313 orrs r3, r2 + 80058e6: 604b str r3, [r1, #4] + if((READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) && (RCC_OscInitStruct->HSIState == RCC_HSI_OFF)) + 80058e8: e040 b.n 800596c + } + } + else + { + /* Check the HSI State */ + if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + 80058ea: 687b ldr r3, [r7, #4] + 80058ec: 68db ldr r3, [r3, #12] + 80058ee: 2b00 cmp r3, #0 + 80058f0: d023 beq.n 800593a + { + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_ENABLE(); + 80058f2: 4b6f ldr r3, [pc, #444] @ (8005ab0 ) + 80058f4: 681b ldr r3, [r3, #0] + 80058f6: 4a6e ldr r2, [pc, #440] @ (8005ab0 ) + 80058f8: f443 7380 orr.w r3, r3, #256 @ 0x100 + 80058fc: 6013 str r3, [r2, #0] + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 80058fe: f7fe fc0d bl 800411c + 8005902: 6138 str r0, [r7, #16] + + /* Wait till HSI is ready */ + while(READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + 8005904: e008 b.n 8005918 + { + if((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + 8005906: f7fe fc09 bl 800411c + 800590a: 4602 mov r2, r0 + 800590c: 693b ldr r3, [r7, #16] + 800590e: 1ad3 subs r3, r2, r3 + 8005910: 2b02 cmp r3, #2 + 8005912: d901 bls.n 8005918 + { + return HAL_TIMEOUT; + 8005914: 2303 movs r3, #3 + 8005916: e255 b.n 8005dc4 + while(READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + 8005918: 4b65 ldr r3, [pc, #404] @ (8005ab0 ) + 800591a: 681b ldr r3, [r3, #0] + 800591c: f403 6380 and.w r3, r3, #1024 @ 0x400 + 8005920: 2b00 cmp r3, #0 + 8005922: d0f0 beq.n 8005906 + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + 8005924: 4b62 ldr r3, [pc, #392] @ (8005ab0 ) + 8005926: 685b ldr r3, [r3, #4] + 8005928: f023 42fe bic.w r2, r3, #2130706432 @ 0x7f000000 + 800592c: 687b ldr r3, [r7, #4] + 800592e: 691b ldr r3, [r3, #16] + 8005930: 061b lsls r3, r3, #24 + 8005932: 495f ldr r1, [pc, #380] @ (8005ab0 ) + 8005934: 4313 orrs r3, r2 + 8005936: 604b str r3, [r1, #4] + 8005938: e018 b.n 800596c + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + 800593a: 4b5d ldr r3, [pc, #372] @ (8005ab0 ) + 800593c: 681b ldr r3, [r3, #0] + 800593e: 4a5c ldr r2, [pc, #368] @ (8005ab0 ) + 8005940: f423 7380 bic.w r3, r3, #256 @ 0x100 + 8005944: 6013 str r3, [r2, #0] + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 8005946: f7fe fbe9 bl 800411c + 800594a: 6138 str r0, [r7, #16] + + /* Wait till HSI is disabled */ + while(READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + 800594c: e008 b.n 8005960 + { + if((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + 800594e: f7fe fbe5 bl 800411c + 8005952: 4602 mov r2, r0 + 8005954: 693b ldr r3, [r7, #16] + 8005956: 1ad3 subs r3, r2, r3 + 8005958: 2b02 cmp r3, #2 + 800595a: d901 bls.n 8005960 + { + return HAL_TIMEOUT; + 800595c: 2303 movs r3, #3 + 800595e: e231 b.n 8005dc4 + while(READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + 8005960: 4b53 ldr r3, [pc, #332] @ (8005ab0 ) + 8005962: 681b ldr r3, [r3, #0] + 8005964: f403 6380 and.w r3, r3, #1024 @ 0x400 + 8005968: 2b00 cmp r3, #0 + 800596a: d1f0 bne.n 800594e + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + 800596c: 687b ldr r3, [r7, #4] + 800596e: 681b ldr r3, [r3, #0] + 8005970: f003 0308 and.w r3, r3, #8 + 8005974: 2b00 cmp r3, #0 + 8005976: d03c beq.n 80059f2 + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + 8005978: 687b ldr r3, [r7, #4] + 800597a: 695b ldr r3, [r3, #20] + 800597c: 2b00 cmp r3, #0 + 800597e: d01c beq.n 80059ba + MODIFY_REG(RCC->CSR, RCC_CSR_LSIPREDIV, RCC_OscInitStruct->LSIDiv); + } +#endif /* RCC_CSR_LSIPREDIV */ + + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + 8005980: 4b4b ldr r3, [pc, #300] @ (8005ab0 ) + 8005982: f8d3 3094 ldr.w r3, [r3, #148] @ 0x94 + 8005986: 4a4a ldr r2, [pc, #296] @ (8005ab0 ) + 8005988: f043 0301 orr.w r3, r3, #1 + 800598c: f8c2 3094 str.w r3, [r2, #148] @ 0x94 + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 8005990: f7fe fbc4 bl 800411c + 8005994: 6138 str r0, [r7, #16] + + /* Wait till LSI is ready */ + while(READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == 0U) + 8005996: e008 b.n 80059aa + { + if((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + 8005998: f7fe fbc0 bl 800411c + 800599c: 4602 mov r2, r0 + 800599e: 693b ldr r3, [r7, #16] + 80059a0: 1ad3 subs r3, r2, r3 + 80059a2: 2b02 cmp r3, #2 + 80059a4: d901 bls.n 80059aa + { + return HAL_TIMEOUT; + 80059a6: 2303 movs r3, #3 + 80059a8: e20c b.n 8005dc4 + while(READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == 0U) + 80059aa: 4b41 ldr r3, [pc, #260] @ (8005ab0 ) + 80059ac: f8d3 3094 ldr.w r3, [r3, #148] @ 0x94 + 80059b0: f003 0302 and.w r3, r3, #2 + 80059b4: 2b00 cmp r3, #0 + 80059b6: d0ef beq.n 8005998 + 80059b8: e01b b.n 80059f2 + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + 80059ba: 4b3d ldr r3, [pc, #244] @ (8005ab0 ) + 80059bc: f8d3 3094 ldr.w r3, [r3, #148] @ 0x94 + 80059c0: 4a3b ldr r2, [pc, #236] @ (8005ab0 ) + 80059c2: f023 0301 bic.w r3, r3, #1 + 80059c6: f8c2 3094 str.w r3, [r2, #148] @ 0x94 + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 80059ca: f7fe fba7 bl 800411c + 80059ce: 6138 str r0, [r7, #16] + + /* Wait till LSI is disabled */ + while(READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + 80059d0: e008 b.n 80059e4 + { + if((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + 80059d2: f7fe fba3 bl 800411c + 80059d6: 4602 mov r2, r0 + 80059d8: 693b ldr r3, [r7, #16] + 80059da: 1ad3 subs r3, r2, r3 + 80059dc: 2b02 cmp r3, #2 + 80059de: d901 bls.n 80059e4 + { + return HAL_TIMEOUT; + 80059e0: 2303 movs r3, #3 + 80059e2: e1ef b.n 8005dc4 + while(READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + 80059e4: 4b32 ldr r3, [pc, #200] @ (8005ab0 ) + 80059e6: f8d3 3094 ldr.w r3, [r3, #148] @ 0x94 + 80059ea: f003 0302 and.w r3, r3, #2 + 80059ee: 2b00 cmp r3, #0 + 80059f0: d1ef bne.n 80059d2 + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + 80059f2: 687b ldr r3, [r7, #4] + 80059f4: 681b ldr r3, [r3, #0] + 80059f6: f003 0304 and.w r3, r3, #4 + 80059fa: 2b00 cmp r3, #0 + 80059fc: f000 80a6 beq.w 8005b4c + { + FlagStatus pwrclkchanged = RESET; + 8005a00: 2300 movs r3, #0 + 8005a02: 77fb strb r3, [r7, #31] + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if(HAL_IS_BIT_CLR(RCC->APB1ENR1, RCC_APB1ENR1_PWREN)) + 8005a04: 4b2a ldr r3, [pc, #168] @ (8005ab0 ) + 8005a06: 6d9b ldr r3, [r3, #88] @ 0x58 + 8005a08: f003 5380 and.w r3, r3, #268435456 @ 0x10000000 + 8005a0c: 2b00 cmp r3, #0 + 8005a0e: d10d bne.n 8005a2c + { + __HAL_RCC_PWR_CLK_ENABLE(); + 8005a10: 4b27 ldr r3, [pc, #156] @ (8005ab0 ) + 8005a12: 6d9b ldr r3, [r3, #88] @ 0x58 + 8005a14: 4a26 ldr r2, [pc, #152] @ (8005ab0 ) + 8005a16: f043 5380 orr.w r3, r3, #268435456 @ 0x10000000 + 8005a1a: 6593 str r3, [r2, #88] @ 0x58 + 8005a1c: 4b24 ldr r3, [pc, #144] @ (8005ab0 ) + 8005a1e: 6d9b ldr r3, [r3, #88] @ 0x58 + 8005a20: f003 5380 and.w r3, r3, #268435456 @ 0x10000000 + 8005a24: 60bb str r3, [r7, #8] + 8005a26: 68bb ldr r3, [r7, #8] + pwrclkchanged = SET; + 8005a28: 2301 movs r3, #1 + 8005a2a: 77fb strb r3, [r7, #31] + } + + if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + 8005a2c: 4b21 ldr r3, [pc, #132] @ (8005ab4 ) + 8005a2e: 681b ldr r3, [r3, #0] + 8005a30: f403 7380 and.w r3, r3, #256 @ 0x100 + 8005a34: 2b00 cmp r3, #0 + 8005a36: d118 bne.n 8005a6a + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + 8005a38: 4b1e ldr r3, [pc, #120] @ (8005ab4 ) + 8005a3a: 681b ldr r3, [r3, #0] + 8005a3c: 4a1d ldr r2, [pc, #116] @ (8005ab4 ) + 8005a3e: f443 7380 orr.w r3, r3, #256 @ 0x100 + 8005a42: 6013 str r3, [r2, #0] + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + 8005a44: f7fe fb6a bl 800411c + 8005a48: 6138 str r0, [r7, #16] + + while(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + 8005a4a: e008 b.n 8005a5e + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + 8005a4c: f7fe fb66 bl 800411c + 8005a50: 4602 mov r2, r0 + 8005a52: 693b ldr r3, [r7, #16] + 8005a54: 1ad3 subs r3, r2, r3 + 8005a56: 2b02 cmp r3, #2 + 8005a58: d901 bls.n 8005a5e + { + return HAL_TIMEOUT; + 8005a5a: 2303 movs r3, #3 + 8005a5c: e1b2 b.n 8005dc4 + while(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + 8005a5e: 4b15 ldr r3, [pc, #84] @ (8005ab4 ) + 8005a60: 681b ldr r3, [r3, #0] + 8005a62: f403 7380 and.w r3, r3, #256 @ 0x100 + 8005a66: 2b00 cmp r3, #0 + 8005a68: d0f0 beq.n 8005a4c + { + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); + } +#else + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + 8005a6a: 687b ldr r3, [r7, #4] + 8005a6c: 689b ldr r3, [r3, #8] + 8005a6e: 2b01 cmp r3, #1 + 8005a70: d108 bne.n 8005a84 + 8005a72: 4b0f ldr r3, [pc, #60] @ (8005ab0 ) + 8005a74: f8d3 3090 ldr.w r3, [r3, #144] @ 0x90 + 8005a78: 4a0d ldr r2, [pc, #52] @ (8005ab0 ) + 8005a7a: f043 0301 orr.w r3, r3, #1 + 8005a7e: f8c2 3090 str.w r3, [r2, #144] @ 0x90 + 8005a82: e029 b.n 8005ad8 + 8005a84: 687b ldr r3, [r7, #4] + 8005a86: 689b ldr r3, [r3, #8] + 8005a88: 2b05 cmp r3, #5 + 8005a8a: d115 bne.n 8005ab8 + 8005a8c: 4b08 ldr r3, [pc, #32] @ (8005ab0 ) + 8005a8e: f8d3 3090 ldr.w r3, [r3, #144] @ 0x90 + 8005a92: 4a07 ldr r2, [pc, #28] @ (8005ab0 ) + 8005a94: f043 0304 orr.w r3, r3, #4 + 8005a98: f8c2 3090 str.w r3, [r2, #144] @ 0x90 + 8005a9c: 4b04 ldr r3, [pc, #16] @ (8005ab0 ) + 8005a9e: f8d3 3090 ldr.w r3, [r3, #144] @ 0x90 + 8005aa2: 4a03 ldr r2, [pc, #12] @ (8005ab0 ) + 8005aa4: f043 0301 orr.w r3, r3, #1 + 8005aa8: f8c2 3090 str.w r3, [r2, #144] @ 0x90 + 8005aac: e014 b.n 8005ad8 + 8005aae: bf00 nop + 8005ab0: 40021000 .word 0x40021000 + 8005ab4: 40007000 .word 0x40007000 + 8005ab8: 4b9a ldr r3, [pc, #616] @ (8005d24 ) + 8005aba: f8d3 3090 ldr.w r3, [r3, #144] @ 0x90 + 8005abe: 4a99 ldr r2, [pc, #612] @ (8005d24 ) + 8005ac0: f023 0301 bic.w r3, r3, #1 + 8005ac4: f8c2 3090 str.w r3, [r2, #144] @ 0x90 + 8005ac8: 4b96 ldr r3, [pc, #600] @ (8005d24 ) + 8005aca: f8d3 3090 ldr.w r3, [r3, #144] @ 0x90 + 8005ace: 4a95 ldr r2, [pc, #596] @ (8005d24 ) + 8005ad0: f023 0304 bic.w r3, r3, #4 + 8005ad4: f8c2 3090 str.w r3, [r2, #144] @ 0x90 +#endif /* RCC_BDCR_LSESYSDIS */ + + /* Check the LSE State */ + if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + 8005ad8: 687b ldr r3, [r7, #4] + 8005ada: 689b ldr r3, [r3, #8] + 8005adc: 2b00 cmp r3, #0 + 8005ade: d016 beq.n 8005b0e + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 8005ae0: f7fe fb1c bl 800411c + 8005ae4: 6138 str r0, [r7, #16] + + /* Wait till LSE is ready */ + while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + 8005ae6: e00a b.n 8005afe + { + if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + 8005ae8: f7fe fb18 bl 800411c + 8005aec: 4602 mov r2, r0 + 8005aee: 693b ldr r3, [r7, #16] + 8005af0: 1ad3 subs r3, r2, r3 + 8005af2: f241 3288 movw r2, #5000 @ 0x1388 + 8005af6: 4293 cmp r3, r2 + 8005af8: d901 bls.n 8005afe + { + return HAL_TIMEOUT; + 8005afa: 2303 movs r3, #3 + 8005afc: e162 b.n 8005dc4 + while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + 8005afe: 4b89 ldr r3, [pc, #548] @ (8005d24 ) + 8005b00: f8d3 3090 ldr.w r3, [r3, #144] @ 0x90 + 8005b04: f003 0302 and.w r3, r3, #2 + 8005b08: 2b00 cmp r3, #0 + 8005b0a: d0ed beq.n 8005ae8 + 8005b0c: e015 b.n 8005b3a + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 8005b0e: f7fe fb05 bl 800411c + 8005b12: 6138 str r0, [r7, #16] + + /* Wait till LSE is disabled */ + while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + 8005b14: e00a b.n 8005b2c + { + if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + 8005b16: f7fe fb01 bl 800411c + 8005b1a: 4602 mov r2, r0 + 8005b1c: 693b ldr r3, [r7, #16] + 8005b1e: 1ad3 subs r3, r2, r3 + 8005b20: f241 3288 movw r2, #5000 @ 0x1388 + 8005b24: 4293 cmp r3, r2 + 8005b26: d901 bls.n 8005b2c + { + return HAL_TIMEOUT; + 8005b28: 2303 movs r3, #3 + 8005b2a: e14b b.n 8005dc4 + while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + 8005b2c: 4b7d ldr r3, [pc, #500] @ (8005d24 ) + 8005b2e: f8d3 3090 ldr.w r3, [r3, #144] @ 0x90 + 8005b32: f003 0302 and.w r3, r3, #2 + 8005b36: 2b00 cmp r3, #0 + 8005b38: d1ed bne.n 8005b16 + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSESYSDIS); +#endif /* RCC_BDCR_LSESYSDIS */ + } + + /* Restore clock configuration if changed */ + if(pwrclkchanged == SET) + 8005b3a: 7ffb ldrb r3, [r7, #31] + 8005b3c: 2b01 cmp r3, #1 + 8005b3e: d105 bne.n 8005b4c + { + __HAL_RCC_PWR_CLK_DISABLE(); + 8005b40: 4b78 ldr r3, [pc, #480] @ (8005d24 ) + 8005b42: 6d9b ldr r3, [r3, #88] @ 0x58 + 8005b44: 4a77 ldr r2, [pc, #476] @ (8005d24 ) + 8005b46: f023 5380 bic.w r3, r3, #268435456 @ 0x10000000 + 8005b4a: 6593 str r3, [r2, #88] @ 0x58 + } + } +#if defined(RCC_HSI48_SUPPORT) + /*------------------------------ HSI48 Configuration -----------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) + 8005b4c: 687b ldr r3, [r7, #4] + 8005b4e: 681b ldr r3, [r3, #0] + 8005b50: f003 0320 and.w r3, r3, #32 + 8005b54: 2b00 cmp r3, #0 + 8005b56: d03c beq.n 8005bd2 + { + /* Check the parameters */ + assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State)); + + /* Check the LSI State */ + if(RCC_OscInitStruct->HSI48State != RCC_HSI48_OFF) + 8005b58: 687b ldr r3, [r7, #4] + 8005b5a: 6a5b ldr r3, [r3, #36] @ 0x24 + 8005b5c: 2b00 cmp r3, #0 + 8005b5e: d01c beq.n 8005b9a + { + /* Enable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_ENABLE(); + 8005b60: 4b70 ldr r3, [pc, #448] @ (8005d24 ) + 8005b62: f8d3 3098 ldr.w r3, [r3, #152] @ 0x98 + 8005b66: 4a6f ldr r2, [pc, #444] @ (8005d24 ) + 8005b68: f043 0301 orr.w r3, r3, #1 + 8005b6c: f8c2 3098 str.w r3, [r2, #152] @ 0x98 + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 8005b70: f7fe fad4 bl 800411c + 8005b74: 6138 str r0, [r7, #16] + + /* Wait till HSI48 is ready */ + while(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48RDY) == 0U) + 8005b76: e008 b.n 8005b8a + { + if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + 8005b78: f7fe fad0 bl 800411c + 8005b7c: 4602 mov r2, r0 + 8005b7e: 693b ldr r3, [r7, #16] + 8005b80: 1ad3 subs r3, r2, r3 + 8005b82: 2b02 cmp r3, #2 + 8005b84: d901 bls.n 8005b8a + { + return HAL_TIMEOUT; + 8005b86: 2303 movs r3, #3 + 8005b88: e11c b.n 8005dc4 + while(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48RDY) == 0U) + 8005b8a: 4b66 ldr r3, [pc, #408] @ (8005d24 ) + 8005b8c: f8d3 3098 ldr.w r3, [r3, #152] @ 0x98 + 8005b90: f003 0302 and.w r3, r3, #2 + 8005b94: 2b00 cmp r3, #0 + 8005b96: d0ef beq.n 8005b78 + 8005b98: e01b b.n 8005bd2 + } + } + else + { + /* Disable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_DISABLE(); + 8005b9a: 4b62 ldr r3, [pc, #392] @ (8005d24 ) + 8005b9c: f8d3 3098 ldr.w r3, [r3, #152] @ 0x98 + 8005ba0: 4a60 ldr r2, [pc, #384] @ (8005d24 ) + 8005ba2: f023 0301 bic.w r3, r3, #1 + 8005ba6: f8c2 3098 str.w r3, [r2, #152] @ 0x98 + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 8005baa: f7fe fab7 bl 800411c + 8005bae: 6138 str r0, [r7, #16] + + /* Wait till HSI48 is disabled */ + while(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48RDY) != 0U) + 8005bb0: e008 b.n 8005bc4 + { + if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + 8005bb2: f7fe fab3 bl 800411c + 8005bb6: 4602 mov r2, r0 + 8005bb8: 693b ldr r3, [r7, #16] + 8005bba: 1ad3 subs r3, r2, r3 + 8005bbc: 2b02 cmp r3, #2 + 8005bbe: d901 bls.n 8005bc4 + { + return HAL_TIMEOUT; + 8005bc0: 2303 movs r3, #3 + 8005bc2: e0ff b.n 8005dc4 + while(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48RDY) != 0U) + 8005bc4: 4b57 ldr r3, [pc, #348] @ (8005d24 ) + 8005bc6: f8d3 3098 ldr.w r3, [r3, #152] @ 0x98 + 8005bca: f003 0302 and.w r3, r3, #2 + 8005bce: 2b00 cmp r3, #0 + 8005bd0: d1ef bne.n 8005bb2 +#endif /* RCC_HSI48_SUPPORT */ + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + + if(RCC_OscInitStruct->PLL.PLLState != RCC_PLL_NONE) + 8005bd2: 687b ldr r3, [r7, #4] + 8005bd4: 6a9b ldr r3, [r3, #40] @ 0x28 + 8005bd6: 2b00 cmp r3, #0 + 8005bd8: f000 80f3 beq.w 8005dc2 + { + /* PLL On ? */ + if(RCC_OscInitStruct->PLL.PLLState == RCC_PLL_ON) + 8005bdc: 687b ldr r3, [r7, #4] + 8005bde: 6a9b ldr r3, [r3, #40] @ 0x28 + 8005be0: 2b02 cmp r3, #2 + 8005be2: f040 80c9 bne.w 8005d78 +#endif /* RCC_PLLP_SUPPORT */ + assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); + assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); + + /* Do nothing if PLL configuration is the unchanged */ + pll_config = RCC->PLLCFGR; + 8005be6: 4b4f ldr r3, [pc, #316] @ (8005d24 ) + 8005be8: 68db ldr r3, [r3, #12] + 8005bea: 617b str r3, [r7, #20] + if((READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + 8005bec: 697b ldr r3, [r7, #20] + 8005bee: f003 0203 and.w r2, r3, #3 + 8005bf2: 687b ldr r3, [r7, #4] + 8005bf4: 6adb ldr r3, [r3, #44] @ 0x2c + 8005bf6: 429a cmp r2, r3 + 8005bf8: d12c bne.n 8005c54 + (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != ((RCC_OscInitStruct->PLL.PLLM - 1U) << RCC_PLLCFGR_PLLM_Pos)) || + 8005bfa: 697b ldr r3, [r7, #20] + 8005bfc: f003 0270 and.w r2, r3, #112 @ 0x70 + 8005c00: 687b ldr r3, [r7, #4] + 8005c02: 6b1b ldr r3, [r3, #48] @ 0x30 + 8005c04: 3b01 subs r3, #1 + 8005c06: 011b lsls r3, r3, #4 + if((READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + 8005c08: 429a cmp r2, r3 + 8005c0a: d123 bne.n 8005c54 + (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos)) || + 8005c0c: 697b ldr r3, [r7, #20] + 8005c0e: f403 42fe and.w r2, r3, #32512 @ 0x7f00 + 8005c12: 687b ldr r3, [r7, #4] + 8005c14: 6b5b ldr r3, [r3, #52] @ 0x34 + 8005c16: 021b lsls r3, r3, #8 + (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != ((RCC_OscInitStruct->PLL.PLLM - 1U) << RCC_PLLCFGR_PLLM_Pos)) || + 8005c18: 429a cmp r2, r3 + 8005c1a: d11b bne.n 8005c54 +#if defined(RCC_PLLP_SUPPORT) +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) + (READ_BIT(pll_config, RCC_PLLCFGR_PLLPDIV) != (RCC_OscInitStruct->PLL.PLLP << RCC_PLLCFGR_PLLPDIV_Pos)) || + 8005c1c: 697b ldr r3, [r7, #20] + 8005c1e: f003 4278 and.w r2, r3, #4160749568 @ 0xf8000000 + 8005c22: 687b ldr r3, [r7, #4] + 8005c24: 6b9b ldr r3, [r3, #56] @ 0x38 + 8005c26: 06db lsls r3, r3, #27 + (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos)) || + 8005c28: 429a cmp r2, r3 + 8005c2a: d113 bne.n 8005c54 +#else + (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != ((RCC_OscInitStruct->PLL.PLLP == RCC_PLLP_DIV7) ? 0U : 1U)) || +#endif +#endif + (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != ((((RCC_OscInitStruct->PLL.PLLQ) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos)) || + 8005c2c: 697b ldr r3, [r7, #20] + 8005c2e: f403 02c0 and.w r2, r3, #6291456 @ 0x600000 + 8005c32: 687b ldr r3, [r7, #4] + 8005c34: 6bdb ldr r3, [r3, #60] @ 0x3c + 8005c36: 085b lsrs r3, r3, #1 + 8005c38: 3b01 subs r3, #1 + 8005c3a: 055b lsls r3, r3, #21 + (READ_BIT(pll_config, RCC_PLLCFGR_PLLPDIV) != (RCC_OscInitStruct->PLL.PLLP << RCC_PLLCFGR_PLLPDIV_Pos)) || + 8005c3c: 429a cmp r2, r3 + 8005c3e: d109 bne.n 8005c54 + (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != ((((RCC_OscInitStruct->PLL.PLLR) >> 1U) - 1U) << RCC_PLLCFGR_PLLR_Pos))) + 8005c40: 697b ldr r3, [r7, #20] + 8005c42: f003 62c0 and.w r2, r3, #100663296 @ 0x6000000 + 8005c46: 687b ldr r3, [r7, #4] + 8005c48: 6c1b ldr r3, [r3, #64] @ 0x40 + 8005c4a: 085b lsrs r3, r3, #1 + 8005c4c: 3b01 subs r3, #1 + 8005c4e: 065b lsls r3, r3, #25 + (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != ((((RCC_OscInitStruct->PLL.PLLQ) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos)) || + 8005c50: 429a cmp r2, r3 + 8005c52: d06b beq.n 8005d2c + { + /* Check if the PLL is used as system clock or not */ + if(sysclk_source != RCC_CFGR_SWS_PLL) + 8005c54: 69bb ldr r3, [r7, #24] + 8005c56: 2b0c cmp r3, #12 + 8005c58: d062 beq.n 8005d20 + { +#if defined(RCC_PLLSAI1_SUPPORT) || defined(RCC_PLLSAI2_SUPPORT) + /* Check if main PLL can be updated */ + /* Not possible if the source is shared by other enabled PLLSAIx */ + if((READ_BIT(RCC->CR, RCC_CR_PLLSAI1ON) != 0U) + 8005c5a: 4b32 ldr r3, [pc, #200] @ (8005d24 ) + 8005c5c: 681b ldr r3, [r3, #0] + 8005c5e: f003 6380 and.w r3, r3, #67108864 @ 0x4000000 + 8005c62: 2b00 cmp r3, #0 + 8005c64: d001 beq.n 8005c6a +#if defined(RCC_PLLSAI2_SUPPORT) + || (READ_BIT(RCC->CR, RCC_CR_PLLSAI2ON) != 0U) +#endif + ) + { + return HAL_ERROR; + 8005c66: 2301 movs r3, #1 + 8005c68: e0ac b.n 8005dc4 + } + else +#endif /* RCC_PLLSAI1_SUPPORT || RCC_PLLSAI2_SUPPORT */ + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + 8005c6a: 4b2e ldr r3, [pc, #184] @ (8005d24 ) + 8005c6c: 681b ldr r3, [r3, #0] + 8005c6e: 4a2d ldr r2, [pc, #180] @ (8005d24 ) + 8005c70: f023 7380 bic.w r3, r3, #16777216 @ 0x1000000 + 8005c74: 6013 str r3, [r2, #0] + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 8005c76: f7fe fa51 bl 800411c + 8005c7a: 6138 str r0, [r7, #16] + + /* Wait till PLL is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + 8005c7c: e008 b.n 8005c90 + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + 8005c7e: f7fe fa4d bl 800411c + 8005c82: 4602 mov r2, r0 + 8005c84: 693b ldr r3, [r7, #16] + 8005c86: 1ad3 subs r3, r2, r3 + 8005c88: 2b02 cmp r3, #2 + 8005c8a: d901 bls.n 8005c90 + { + return HAL_TIMEOUT; + 8005c8c: 2303 movs r3, #3 + 8005c8e: e099 b.n 8005dc4 + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + 8005c90: 4b24 ldr r3, [pc, #144] @ (8005d24 ) + 8005c92: 681b ldr r3, [r3, #0] + 8005c94: f003 7300 and.w r3, r3, #33554432 @ 0x2000000 + 8005c98: 2b00 cmp r3, #0 + 8005c9a: d1f0 bne.n 8005c7e + } + } + + /* Configure the main PLL clock source, multiplication and division factors. */ +#if defined(RCC_PLLP_SUPPORT) + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + 8005c9c: 4b21 ldr r3, [pc, #132] @ (8005d24 ) + 8005c9e: 68da ldr r2, [r3, #12] + 8005ca0: 4b21 ldr r3, [pc, #132] @ (8005d28 ) + 8005ca2: 4013 ands r3, r2 + 8005ca4: 687a ldr r2, [r7, #4] + 8005ca6: 6ad1 ldr r1, [r2, #44] @ 0x2c + 8005ca8: 687a ldr r2, [r7, #4] + 8005caa: 6b12 ldr r2, [r2, #48] @ 0x30 + 8005cac: 3a01 subs r2, #1 + 8005cae: 0112 lsls r2, r2, #4 + 8005cb0: 4311 orrs r1, r2 + 8005cb2: 687a ldr r2, [r7, #4] + 8005cb4: 6b52 ldr r2, [r2, #52] @ 0x34 + 8005cb6: 0212 lsls r2, r2, #8 + 8005cb8: 4311 orrs r1, r2 + 8005cba: 687a ldr r2, [r7, #4] + 8005cbc: 6bd2 ldr r2, [r2, #60] @ 0x3c + 8005cbe: 0852 lsrs r2, r2, #1 + 8005cc0: 3a01 subs r2, #1 + 8005cc2: 0552 lsls r2, r2, #21 + 8005cc4: 4311 orrs r1, r2 + 8005cc6: 687a ldr r2, [r7, #4] + 8005cc8: 6c12 ldr r2, [r2, #64] @ 0x40 + 8005cca: 0852 lsrs r2, r2, #1 + 8005ccc: 3a01 subs r2, #1 + 8005cce: 0652 lsls r2, r2, #25 + 8005cd0: 4311 orrs r1, r2 + 8005cd2: 687a ldr r2, [r7, #4] + 8005cd4: 6b92 ldr r2, [r2, #56] @ 0x38 + 8005cd6: 06d2 lsls r2, r2, #27 + 8005cd8: 430a orrs r2, r1 + 8005cda: 4912 ldr r1, [pc, #72] @ (8005d24 ) + 8005cdc: 4313 orrs r3, r2 + 8005cde: 60cb str r3, [r1, #12] + RCC_OscInitStruct->PLL.PLLQ, + RCC_OscInitStruct->PLL.PLLR); +#endif + + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + 8005ce0: 4b10 ldr r3, [pc, #64] @ (8005d24 ) + 8005ce2: 681b ldr r3, [r3, #0] + 8005ce4: 4a0f ldr r2, [pc, #60] @ (8005d24 ) + 8005ce6: f043 7380 orr.w r3, r3, #16777216 @ 0x1000000 + 8005cea: 6013 str r3, [r2, #0] + + /* Enable PLL System Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SYSCLK); + 8005cec: 4b0d ldr r3, [pc, #52] @ (8005d24 ) + 8005cee: 68db ldr r3, [r3, #12] + 8005cf0: 4a0c ldr r2, [pc, #48] @ (8005d24 ) + 8005cf2: f043 7380 orr.w r3, r3, #16777216 @ 0x1000000 + 8005cf6: 60d3 str r3, [r2, #12] + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 8005cf8: f7fe fa10 bl 800411c + 8005cfc: 6138 str r0, [r7, #16] + + /* Wait till PLL is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + 8005cfe: e008 b.n 8005d12 + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + 8005d00: f7fe fa0c bl 800411c + 8005d04: 4602 mov r2, r0 + 8005d06: 693b ldr r3, [r7, #16] + 8005d08: 1ad3 subs r3, r2, r3 + 8005d0a: 2b02 cmp r3, #2 + 8005d0c: d901 bls.n 8005d12 + { + return HAL_TIMEOUT; + 8005d0e: 2303 movs r3, #3 + 8005d10: e058 b.n 8005dc4 + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + 8005d12: 4b04 ldr r3, [pc, #16] @ (8005d24 ) + 8005d14: 681b ldr r3, [r3, #0] + 8005d16: f003 7300 and.w r3, r3, #33554432 @ 0x2000000 + 8005d1a: 2b00 cmp r3, #0 + 8005d1c: d0f0 beq.n 8005d00 + if(sysclk_source != RCC_CFGR_SWS_PLL) + 8005d1e: e050 b.n 8005dc2 + } + } + else + { + /* PLL is already used as System core clock */ + return HAL_ERROR; + 8005d20: 2301 movs r3, #1 + 8005d22: e04f b.n 8005dc4 + 8005d24: 40021000 .word 0x40021000 + 8005d28: 019d808c .word 0x019d808c + } + else + { + /* PLL configuration is unchanged */ + /* Re-enable PLL if it was disabled (ie. low power mode) */ + if(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + 8005d2c: 4b27 ldr r3, [pc, #156] @ (8005dcc ) + 8005d2e: 681b ldr r3, [r3, #0] + 8005d30: f003 7300 and.w r3, r3, #33554432 @ 0x2000000 + 8005d34: 2b00 cmp r3, #0 + 8005d36: d144 bne.n 8005dc2 + { + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + 8005d38: 4b24 ldr r3, [pc, #144] @ (8005dcc ) + 8005d3a: 681b ldr r3, [r3, #0] + 8005d3c: 4a23 ldr r2, [pc, #140] @ (8005dcc ) + 8005d3e: f043 7380 orr.w r3, r3, #16777216 @ 0x1000000 + 8005d42: 6013 str r3, [r2, #0] + + /* Enable PLL System Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SYSCLK); + 8005d44: 4b21 ldr r3, [pc, #132] @ (8005dcc ) + 8005d46: 68db ldr r3, [r3, #12] + 8005d48: 4a20 ldr r2, [pc, #128] @ (8005dcc ) + 8005d4a: f043 7380 orr.w r3, r3, #16777216 @ 0x1000000 + 8005d4e: 60d3 str r3, [r2, #12] + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 8005d50: f7fe f9e4 bl 800411c + 8005d54: 6138 str r0, [r7, #16] + + /* Wait till PLL is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + 8005d56: e008 b.n 8005d6a + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + 8005d58: f7fe f9e0 bl 800411c + 8005d5c: 4602 mov r2, r0 + 8005d5e: 693b ldr r3, [r7, #16] + 8005d60: 1ad3 subs r3, r2, r3 + 8005d62: 2b02 cmp r3, #2 + 8005d64: d901 bls.n 8005d6a + { + return HAL_TIMEOUT; + 8005d66: 2303 movs r3, #3 + 8005d68: e02c b.n 8005dc4 + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + 8005d6a: 4b18 ldr r3, [pc, #96] @ (8005dcc ) + 8005d6c: 681b ldr r3, [r3, #0] + 8005d6e: f003 7300 and.w r3, r3, #33554432 @ 0x2000000 + 8005d72: 2b00 cmp r3, #0 + 8005d74: d0f0 beq.n 8005d58 + 8005d76: e024 b.n 8005dc2 + } + } + else + { + /* Check that PLL is not used as system clock or not */ + if(sysclk_source != RCC_CFGR_SWS_PLL) + 8005d78: 69bb ldr r3, [r7, #24] + 8005d7a: 2b0c cmp r3, #12 + 8005d7c: d01f beq.n 8005dbe + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + 8005d7e: 4b13 ldr r3, [pc, #76] @ (8005dcc ) + 8005d80: 681b ldr r3, [r3, #0] + 8005d82: 4a12 ldr r2, [pc, #72] @ (8005dcc ) + 8005d84: f023 7380 bic.w r3, r3, #16777216 @ 0x1000000 + 8005d88: 6013 str r3, [r2, #0] + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 8005d8a: f7fe f9c7 bl 800411c + 8005d8e: 6138 str r0, [r7, #16] + + /* Wait till PLL is disabled */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + 8005d90: e008 b.n 8005da4 + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + 8005d92: f7fe f9c3 bl 800411c + 8005d96: 4602 mov r2, r0 + 8005d98: 693b ldr r3, [r7, #16] + 8005d9a: 1ad3 subs r3, r2, r3 + 8005d9c: 2b02 cmp r3, #2 + 8005d9e: d901 bls.n 8005da4 + { + return HAL_TIMEOUT; + 8005da0: 2303 movs r3, #3 + 8005da2: e00f b.n 8005dc4 + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + 8005da4: 4b09 ldr r3, [pc, #36] @ (8005dcc ) + 8005da6: 681b ldr r3, [r3, #0] + 8005da8: f003 7300 and.w r3, r3, #33554432 @ 0x2000000 + 8005dac: 2b00 cmp r3, #0 + 8005dae: d1f0 bne.n 8005d92 + } + /* Unselect main PLL clock source and disable main PLL outputs to save power */ +#if defined(RCC_PLLSAI2_SUPPORT) + RCC->PLLCFGR &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLL_SYSCLK | RCC_PLL_48M1CLK | RCC_PLL_SAI3CLK); +#elif defined(RCC_PLLSAI1_SUPPORT) + RCC->PLLCFGR &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLL_SYSCLK | RCC_PLL_48M1CLK | RCC_PLL_SAI2CLK); + 8005db0: 4b06 ldr r3, [pc, #24] @ (8005dcc ) + 8005db2: 68da ldr r2, [r3, #12] + 8005db4: 4905 ldr r1, [pc, #20] @ (8005dcc ) + 8005db6: 4b06 ldr r3, [pc, #24] @ (8005dd0 ) + 8005db8: 4013 ands r3, r2 + 8005dba: 60cb str r3, [r1, #12] + 8005dbc: e001 b.n 8005dc2 +#endif /* RCC_PLLSAI2_SUPPORT */ + } + else + { + /* PLL is already used as System core clock */ + return HAL_ERROR; + 8005dbe: 2301 movs r3, #1 + 8005dc0: e000 b.n 8005dc4 + } + } + } + return HAL_OK; + 8005dc2: 2300 movs r3, #0 +} + 8005dc4: 4618 mov r0, r3 + 8005dc6: 3720 adds r7, #32 + 8005dc8: 46bd mov sp, r7 + 8005dca: bd80 pop {r7, pc} + 8005dcc: 40021000 .word 0x40021000 + 8005dd0: feeefffc .word 0xfeeefffc + +08005dd4 : + * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency + * (for more details refer to section above "Initialization/de-initialization functions") + * @retval None + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + 8005dd4: b580 push {r7, lr} + 8005dd6: b084 sub sp, #16 + 8005dd8: af00 add r7, sp, #0 + 8005dda: 6078 str r0, [r7, #4] + 8005ddc: 6039 str r1, [r7, #0] + uint32_t hpre = RCC_SYSCLK_DIV1; +#endif + HAL_StatusTypeDef status; + + /* Check Null pointer */ + if(RCC_ClkInitStruct == NULL) + 8005dde: 687b ldr r3, [r7, #4] + 8005de0: 2b00 cmp r3, #0 + 8005de2: d101 bne.n 8005de8 + { + return HAL_ERROR; + 8005de4: 2301 movs r3, #1 + 8005de6: e0e7 b.n 8005fb8 + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) and the supply voltage of the device. */ + + /* Increasing the number of wait states because of higher CPU frequency */ + if(FLatency > __HAL_FLASH_GET_LATENCY()) + 8005de8: 4b75 ldr r3, [pc, #468] @ (8005fc0 ) + 8005dea: 681b ldr r3, [r3, #0] + 8005dec: f003 0307 and.w r3, r3, #7 + 8005df0: 683a ldr r2, [r7, #0] + 8005df2: 429a cmp r2, r3 + 8005df4: d910 bls.n 8005e18 + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + 8005df6: 4b72 ldr r3, [pc, #456] @ (8005fc0 ) + 8005df8: 681b ldr r3, [r3, #0] + 8005dfa: f023 0207 bic.w r2, r3, #7 + 8005dfe: 4970 ldr r1, [pc, #448] @ (8005fc0 ) + 8005e00: 683b ldr r3, [r7, #0] + 8005e02: 4313 orrs r3, r2 + 8005e04: 600b str r3, [r1, #0] + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + 8005e06: 4b6e ldr r3, [pc, #440] @ (8005fc0 ) + 8005e08: 681b ldr r3, [r3, #0] + 8005e0a: f003 0307 and.w r3, r3, #7 + 8005e0e: 683a ldr r2, [r7, #0] + 8005e10: 429a cmp r2, r3 + 8005e12: d001 beq.n 8005e18 + { + return HAL_ERROR; + 8005e14: 2301 movs r3, #1 + 8005e16: e0cf b.n 8005fb8 + } + } + + /*----------------- HCLK Configuration prior to SYSCLK----------------------*/ + /* Apply higher HCLK prescaler request here to ensure CPU clock is not of of spec when SYSCLK is increased */ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + 8005e18: 687b ldr r3, [r7, #4] + 8005e1a: 681b ldr r3, [r3, #0] + 8005e1c: f003 0302 and.w r3, r3, #2 + 8005e20: 2b00 cmp r3, #0 + 8005e22: d010 beq.n 8005e46 + { + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + + if(RCC_ClkInitStruct->AHBCLKDivider > READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)) + 8005e24: 687b ldr r3, [r7, #4] + 8005e26: 689a ldr r2, [r3, #8] + 8005e28: 4b66 ldr r3, [pc, #408] @ (8005fc4 ) + 8005e2a: 689b ldr r3, [r3, #8] + 8005e2c: f003 03f0 and.w r3, r3, #240 @ 0xf0 + 8005e30: 429a cmp r2, r3 + 8005e32: d908 bls.n 8005e46 + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + 8005e34: 4b63 ldr r3, [pc, #396] @ (8005fc4 ) + 8005e36: 689b ldr r3, [r3, #8] + 8005e38: f023 02f0 bic.w r2, r3, #240 @ 0xf0 + 8005e3c: 687b ldr r3, [r7, #4] + 8005e3e: 689b ldr r3, [r3, #8] + 8005e40: 4960 ldr r1, [pc, #384] @ (8005fc4 ) + 8005e42: 4313 orrs r3, r2 + 8005e44: 608b str r3, [r1, #8] + } + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + 8005e46: 687b ldr r3, [r7, #4] + 8005e48: 681b ldr r3, [r3, #0] + 8005e4a: f003 0301 and.w r3, r3, #1 + 8005e4e: 2b00 cmp r3, #0 + 8005e50: d04c beq.n 8005eec + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* PLL is selected as System Clock Source */ + if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + 8005e52: 687b ldr r3, [r7, #4] + 8005e54: 685b ldr r3, [r3, #4] + 8005e56: 2b03 cmp r3, #3 + 8005e58: d107 bne.n 8005e6a + { + /* Check the PLL ready flag */ + if(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + 8005e5a: 4b5a ldr r3, [pc, #360] @ (8005fc4 ) + 8005e5c: 681b ldr r3, [r3, #0] + 8005e5e: f003 7300 and.w r3, r3, #33554432 @ 0x2000000 + 8005e62: 2b00 cmp r3, #0 + 8005e64: d121 bne.n 8005eaa + { + return HAL_ERROR; + 8005e66: 2301 movs r3, #1 + 8005e68: e0a6 b.n 8005fb8 +#endif + } + else + { + /* HSE is selected as System Clock Source */ + if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + 8005e6a: 687b ldr r3, [r7, #4] + 8005e6c: 685b ldr r3, [r3, #4] + 8005e6e: 2b02 cmp r3, #2 + 8005e70: d107 bne.n 8005e82 + { + /* Check the HSE ready flag */ + if(READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + 8005e72: 4b54 ldr r3, [pc, #336] @ (8005fc4 ) + 8005e74: 681b ldr r3, [r3, #0] + 8005e76: f403 3300 and.w r3, r3, #131072 @ 0x20000 + 8005e7a: 2b00 cmp r3, #0 + 8005e7c: d115 bne.n 8005eaa + { + return HAL_ERROR; + 8005e7e: 2301 movs r3, #1 + 8005e80: e09a b.n 8005fb8 + } + } + /* MSI is selected as System Clock Source */ + else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_MSI) + 8005e82: 687b ldr r3, [r7, #4] + 8005e84: 685b ldr r3, [r3, #4] + 8005e86: 2b00 cmp r3, #0 + 8005e88: d107 bne.n 8005e9a + { + /* Check the MSI ready flag */ + if(READ_BIT(RCC->CR, RCC_CR_MSIRDY) == 0U) + 8005e8a: 4b4e ldr r3, [pc, #312] @ (8005fc4 ) + 8005e8c: 681b ldr r3, [r3, #0] + 8005e8e: f003 0302 and.w r3, r3, #2 + 8005e92: 2b00 cmp r3, #0 + 8005e94: d109 bne.n 8005eaa + { + return HAL_ERROR; + 8005e96: 2301 movs r3, #1 + 8005e98: e08e b.n 8005fb8 + } + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if(READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + 8005e9a: 4b4a ldr r3, [pc, #296] @ (8005fc4 ) + 8005e9c: 681b ldr r3, [r3, #0] + 8005e9e: f403 6380 and.w r3, r3, #1024 @ 0x400 + 8005ea2: 2b00 cmp r3, #0 + 8005ea4: d101 bne.n 8005eaa + { + return HAL_ERROR; + 8005ea6: 2301 movs r3, #1 + 8005ea8: e086 b.n 8005fb8 + } +#endif + + } + + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource); + 8005eaa: 4b46 ldr r3, [pc, #280] @ (8005fc4 ) + 8005eac: 689b ldr r3, [r3, #8] + 8005eae: f023 0203 bic.w r2, r3, #3 + 8005eb2: 687b ldr r3, [r7, #4] + 8005eb4: 685b ldr r3, [r3, #4] + 8005eb6: 4943 ldr r1, [pc, #268] @ (8005fc4 ) + 8005eb8: 4313 orrs r3, r2 + 8005eba: 608b str r3, [r1, #8] + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 8005ebc: f7fe f92e bl 800411c + 8005ec0: 60f8 str r0, [r7, #12] + + while(__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + 8005ec2: e00a b.n 8005eda + { + if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + 8005ec4: f7fe f92a bl 800411c + 8005ec8: 4602 mov r2, r0 + 8005eca: 68fb ldr r3, [r7, #12] + 8005ecc: 1ad3 subs r3, r2, r3 + 8005ece: f241 3288 movw r2, #5000 @ 0x1388 + 8005ed2: 4293 cmp r3, r2 + 8005ed4: d901 bls.n 8005eda + { + return HAL_TIMEOUT; + 8005ed6: 2303 movs r3, #3 + 8005ed8: e06e b.n 8005fb8 + while(__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + 8005eda: 4b3a ldr r3, [pc, #232] @ (8005fc4 ) + 8005edc: 689b ldr r3, [r3, #8] + 8005ede: f003 020c and.w r2, r3, #12 + 8005ee2: 687b ldr r3, [r7, #4] + 8005ee4: 685b ldr r3, [r3, #4] + 8005ee6: 009b lsls r3, r3, #2 + 8005ee8: 429a cmp r2, r3 + 8005eea: d1eb bne.n 8005ec4 + } +#endif + + /*----------------- HCLK Configuration after SYSCLK-------------------------*/ + /* Apply lower HCLK prescaler request here to ensure CPU clock is not of of spec when SYSCLK is set */ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + 8005eec: 687b ldr r3, [r7, #4] + 8005eee: 681b ldr r3, [r3, #0] + 8005ef0: f003 0302 and.w r3, r3, #2 + 8005ef4: 2b00 cmp r3, #0 + 8005ef6: d010 beq.n 8005f1a + { + if(RCC_ClkInitStruct->AHBCLKDivider < READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)) + 8005ef8: 687b ldr r3, [r7, #4] + 8005efa: 689a ldr r2, [r3, #8] + 8005efc: 4b31 ldr r3, [pc, #196] @ (8005fc4 ) + 8005efe: 689b ldr r3, [r3, #8] + 8005f00: f003 03f0 and.w r3, r3, #240 @ 0xf0 + 8005f04: 429a cmp r2, r3 + 8005f06: d208 bcs.n 8005f1a + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + 8005f08: 4b2e ldr r3, [pc, #184] @ (8005fc4 ) + 8005f0a: 689b ldr r3, [r3, #8] + 8005f0c: f023 02f0 bic.w r2, r3, #240 @ 0xf0 + 8005f10: 687b ldr r3, [r7, #4] + 8005f12: 689b ldr r3, [r3, #8] + 8005f14: 492b ldr r1, [pc, #172] @ (8005fc4 ) + 8005f16: 4313 orrs r3, r2 + 8005f18: 608b str r3, [r1, #8] + } + } + + /* Allow decreasing of the number of wait states (because of lower CPU frequency expected) */ + if(FLatency < __HAL_FLASH_GET_LATENCY()) + 8005f1a: 4b29 ldr r3, [pc, #164] @ (8005fc0 ) + 8005f1c: 681b ldr r3, [r3, #0] + 8005f1e: f003 0307 and.w r3, r3, #7 + 8005f22: 683a ldr r2, [r7, #0] + 8005f24: 429a cmp r2, r3 + 8005f26: d210 bcs.n 8005f4a + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + 8005f28: 4b25 ldr r3, [pc, #148] @ (8005fc0 ) + 8005f2a: 681b ldr r3, [r3, #0] + 8005f2c: f023 0207 bic.w r2, r3, #7 + 8005f30: 4923 ldr r1, [pc, #140] @ (8005fc0 ) + 8005f32: 683b ldr r3, [r7, #0] + 8005f34: 4313 orrs r3, r2 + 8005f36: 600b str r3, [r1, #0] + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + 8005f38: 4b21 ldr r3, [pc, #132] @ (8005fc0 ) + 8005f3a: 681b ldr r3, [r3, #0] + 8005f3c: f003 0307 and.w r3, r3, #7 + 8005f40: 683a ldr r2, [r7, #0] + 8005f42: 429a cmp r2, r3 + 8005f44: d001 beq.n 8005f4a + { + return HAL_ERROR; + 8005f46: 2301 movs r3, #1 + 8005f48: e036 b.n 8005fb8 + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + 8005f4a: 687b ldr r3, [r7, #4] + 8005f4c: 681b ldr r3, [r3, #0] + 8005f4e: f003 0304 and.w r3, r3, #4 + 8005f52: 2b00 cmp r3, #0 + 8005f54: d008 beq.n 8005f68 + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); + 8005f56: 4b1b ldr r3, [pc, #108] @ (8005fc4 ) + 8005f58: 689b ldr r3, [r3, #8] + 8005f5a: f423 62e0 bic.w r2, r3, #1792 @ 0x700 + 8005f5e: 687b ldr r3, [r7, #4] + 8005f60: 68db ldr r3, [r3, #12] + 8005f62: 4918 ldr r1, [pc, #96] @ (8005fc4 ) + 8005f64: 4313 orrs r3, r2 + 8005f66: 608b str r3, [r1, #8] + } + + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + 8005f68: 687b ldr r3, [r7, #4] + 8005f6a: 681b ldr r3, [r3, #0] + 8005f6c: f003 0308 and.w r3, r3, #8 + 8005f70: 2b00 cmp r3, #0 + 8005f72: d009 beq.n 8005f88 + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U)); + 8005f74: 4b13 ldr r3, [pc, #76] @ (8005fc4 ) + 8005f76: 689b ldr r3, [r3, #8] + 8005f78: f423 5260 bic.w r2, r3, #14336 @ 0x3800 + 8005f7c: 687b ldr r3, [r7, #4] + 8005f7e: 691b ldr r3, [r3, #16] + 8005f80: 00db lsls r3, r3, #3 + 8005f82: 4910 ldr r1, [pc, #64] @ (8005fc4 ) + 8005f84: 4313 orrs r3, r2 + 8005f86: 608b str r3, [r1, #8] + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> (AHBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos] & 0x1FU); + 8005f88: f000 f824 bl 8005fd4 + 8005f8c: 4602 mov r2, r0 + 8005f8e: 4b0d ldr r3, [pc, #52] @ (8005fc4 ) + 8005f90: 689b ldr r3, [r3, #8] + 8005f92: 091b lsrs r3, r3, #4 + 8005f94: f003 030f and.w r3, r3, #15 + 8005f98: 490b ldr r1, [pc, #44] @ (8005fc8 ) + 8005f9a: 5ccb ldrb r3, [r1, r3] + 8005f9c: f003 031f and.w r3, r3, #31 + 8005fa0: fa22 f303 lsr.w r3, r2, r3 + 8005fa4: 4a09 ldr r2, [pc, #36] @ (8005fcc ) + 8005fa6: 6013 str r3, [r2, #0] + + /* Configure the source of time base considering new system clocks settings*/ + status = HAL_InitTick(uwTickPrio); + 8005fa8: 4b09 ldr r3, [pc, #36] @ (8005fd0 ) + 8005faa: 681b ldr r3, [r3, #0] + 8005fac: 4618 mov r0, r3 + 8005fae: f7fe f865 bl 800407c + 8005fb2: 4603 mov r3, r0 + 8005fb4: 72fb strb r3, [r7, #11] + + return status; + 8005fb6: 7afb ldrb r3, [r7, #11] +} + 8005fb8: 4618 mov r0, r3 + 8005fba: 3710 adds r7, #16 + 8005fbc: 46bd mov sp, r7 + 8005fbe: bd80 pop {r7, pc} + 8005fc0: 40022000 .word 0x40022000 + 8005fc4: 40021000 .word 0x40021000 + 8005fc8: 0800b8f4 .word 0x0800b8f4 + 8005fcc: 20000000 .word 0x20000000 + 8005fd0: 20000004 .word 0x20000004 + +08005fd4 : + * + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + 8005fd4: b480 push {r7} + 8005fd6: b089 sub sp, #36 @ 0x24 + 8005fd8: af00 add r7, sp, #0 + uint32_t msirange = 0U, sysclockfreq = 0U; + 8005fda: 2300 movs r3, #0 + 8005fdc: 61fb str r3, [r7, #28] + 8005fde: 2300 movs r3, #0 + 8005fe0: 61bb str r3, [r7, #24] + uint32_t pllvco, pllsource, pllr, pllm; /* no init needed */ + uint32_t sysclk_source, pll_oscsource; + + sysclk_source = __HAL_RCC_GET_SYSCLK_SOURCE(); + 8005fe2: 4b3e ldr r3, [pc, #248] @ (80060dc ) + 8005fe4: 689b ldr r3, [r3, #8] + 8005fe6: f003 030c and.w r3, r3, #12 + 8005fea: 613b str r3, [r7, #16] + pll_oscsource = __HAL_RCC_GET_PLL_OSCSOURCE(); + 8005fec: 4b3b ldr r3, [pc, #236] @ (80060dc ) + 8005fee: 68db ldr r3, [r3, #12] + 8005ff0: f003 0303 and.w r3, r3, #3 + 8005ff4: 60fb str r3, [r7, #12] + + if((sysclk_source == RCC_CFGR_SWS_MSI) || + 8005ff6: 693b ldr r3, [r7, #16] + 8005ff8: 2b00 cmp r3, #0 + 8005ffa: d005 beq.n 8006008 + 8005ffc: 693b ldr r3, [r7, #16] + 8005ffe: 2b0c cmp r3, #12 + 8006000: d121 bne.n 8006046 + ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_oscsource == RCC_PLLSOURCE_MSI))) + 8006002: 68fb ldr r3, [r7, #12] + 8006004: 2b01 cmp r3, #1 + 8006006: d11e bne.n 8006046 + { + /* MSI or PLL with MSI source used as system clock source */ + + /* Get SYSCLK source */ + if(READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) == 0U) + 8006008: 4b34 ldr r3, [pc, #208] @ (80060dc ) + 800600a: 681b ldr r3, [r3, #0] + 800600c: f003 0308 and.w r3, r3, #8 + 8006010: 2b00 cmp r3, #0 + 8006012: d107 bne.n 8006024 + { /* MSISRANGE from RCC_CSR applies */ + msirange = READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE) >> RCC_CSR_MSISRANGE_Pos; + 8006014: 4b31 ldr r3, [pc, #196] @ (80060dc ) + 8006016: f8d3 3094 ldr.w r3, [r3, #148] @ 0x94 + 800601a: 0a1b lsrs r3, r3, #8 + 800601c: f003 030f and.w r3, r3, #15 + 8006020: 61fb str r3, [r7, #28] + 8006022: e005 b.n 8006030 + } + else + { /* MSIRANGE from RCC_CR applies */ + msirange = READ_BIT(RCC->CR, RCC_CR_MSIRANGE) >> RCC_CR_MSIRANGE_Pos; + 8006024: 4b2d ldr r3, [pc, #180] @ (80060dc ) + 8006026: 681b ldr r3, [r3, #0] + 8006028: 091b lsrs r3, r3, #4 + 800602a: f003 030f and.w r3, r3, #15 + 800602e: 61fb str r3, [r7, #28] + } + /*MSI frequency range in HZ*/ + msirange = MSIRangeTable[msirange]; + 8006030: 4a2b ldr r2, [pc, #172] @ (80060e0 ) + 8006032: 69fb ldr r3, [r7, #28] + 8006034: f852 3023 ldr.w r3, [r2, r3, lsl #2] + 8006038: 61fb str r3, [r7, #28] + + if(sysclk_source == RCC_CFGR_SWS_MSI) + 800603a: 693b ldr r3, [r7, #16] + 800603c: 2b00 cmp r3, #0 + 800603e: d10d bne.n 800605c + { + /* MSI used as system clock source */ + sysclockfreq = msirange; + 8006040: 69fb ldr r3, [r7, #28] + 8006042: 61bb str r3, [r7, #24] + if(sysclk_source == RCC_CFGR_SWS_MSI) + 8006044: e00a b.n 800605c + } + } + else if(sysclk_source == RCC_CFGR_SWS_HSI) + 8006046: 693b ldr r3, [r7, #16] + 8006048: 2b04 cmp r3, #4 + 800604a: d102 bne.n 8006052 + { + /* HSI used as system clock source */ + sysclockfreq = HSI_VALUE; + 800604c: 4b25 ldr r3, [pc, #148] @ (80060e4 ) + 800604e: 61bb str r3, [r7, #24] + 8006050: e004 b.n 800605c + } + else if(sysclk_source == RCC_CFGR_SWS_HSE) + 8006052: 693b ldr r3, [r7, #16] + 8006054: 2b08 cmp r3, #8 + 8006056: d101 bne.n 800605c + { + /* HSE used as system clock source */ + sysclockfreq = HSE_VALUE; + 8006058: 4b23 ldr r3, [pc, #140] @ (80060e8 ) + 800605a: 61bb str r3, [r7, #24] + else + { + /* unexpected case: sysclockfreq at 0 */ + } + + if(sysclk_source == RCC_CFGR_SWS_PLL) + 800605c: 693b ldr r3, [r7, #16] + 800605e: 2b0c cmp r3, #12 + 8006060: d134 bne.n 80060cc + /* PLL used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE) * PLLN / PLLM + SYSCLK = PLL_VCO / PLLR + */ + pllsource = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); + 8006062: 4b1e ldr r3, [pc, #120] @ (80060dc ) + 8006064: 68db ldr r3, [r3, #12] + 8006066: f003 0303 and.w r3, r3, #3 + 800606a: 60bb str r3, [r7, #8] + + switch (pllsource) + 800606c: 68bb ldr r3, [r7, #8] + 800606e: 2b02 cmp r3, #2 + 8006070: d003 beq.n 800607a + 8006072: 68bb ldr r3, [r7, #8] + 8006074: 2b03 cmp r3, #3 + 8006076: d003 beq.n 8006080 + 8006078: e005 b.n 8006086 + { + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + pllvco = HSI_VALUE; + 800607a: 4b1a ldr r3, [pc, #104] @ (80060e4 ) + 800607c: 617b str r3, [r7, #20] + break; + 800607e: e005 b.n 800608c + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllvco = HSE_VALUE; + 8006080: 4b19 ldr r3, [pc, #100] @ (80060e8 ) + 8006082: 617b str r3, [r7, #20] + break; + 8006084: e002 b.n 800608c + + case RCC_PLLSOURCE_MSI: /* MSI used as PLL clock source */ + default: + pllvco = msirange; + 8006086: 69fb ldr r3, [r7, #28] + 8006088: 617b str r3, [r7, #20] + break; + 800608a: bf00 nop + } + pllm = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U ; + 800608c: 4b13 ldr r3, [pc, #76] @ (80060dc ) + 800608e: 68db ldr r3, [r3, #12] + 8006090: 091b lsrs r3, r3, #4 + 8006092: f003 0307 and.w r3, r3, #7 + 8006096: 3301 adds r3, #1 + 8006098: 607b str r3, [r7, #4] + pllvco = (pllvco * (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)) / pllm; + 800609a: 4b10 ldr r3, [pc, #64] @ (80060dc ) + 800609c: 68db ldr r3, [r3, #12] + 800609e: 0a1b lsrs r3, r3, #8 + 80060a0: f003 037f and.w r3, r3, #127 @ 0x7f + 80060a4: 697a ldr r2, [r7, #20] + 80060a6: fb03 f202 mul.w r2, r3, r2 + 80060aa: 687b ldr r3, [r7, #4] + 80060ac: fbb2 f3f3 udiv r3, r2, r3 + 80060b0: 617b str r3, [r7, #20] + pllr = ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U ) * 2U; + 80060b2: 4b0a ldr r3, [pc, #40] @ (80060dc ) + 80060b4: 68db ldr r3, [r3, #12] + 80060b6: 0e5b lsrs r3, r3, #25 + 80060b8: f003 0303 and.w r3, r3, #3 + 80060bc: 3301 adds r3, #1 + 80060be: 005b lsls r3, r3, #1 + 80060c0: 603b str r3, [r7, #0] + sysclockfreq = pllvco / pllr; + 80060c2: 697a ldr r2, [r7, #20] + 80060c4: 683b ldr r3, [r7, #0] + 80060c6: fbb2 f3f3 udiv r3, r2, r3 + 80060ca: 61bb str r3, [r7, #24] + } + + return sysclockfreq; + 80060cc: 69bb ldr r3, [r7, #24] +} + 80060ce: 4618 mov r0, r3 + 80060d0: 3724 adds r7, #36 @ 0x24 + 80060d2: 46bd mov sp, r7 + 80060d4: f85d 7b04 ldr.w r7, [sp], #4 + 80060d8: 4770 bx lr + 80060da: bf00 nop + 80060dc: 40021000 .word 0x40021000 + 80060e0: 0800b90c .word 0x0800b90c + 80060e4: 00f42400 .word 0x00f42400 + 80060e8: 007a1200 .word 0x007a1200 + +080060ec : + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency. + * @retval HCLK frequency in Hz + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + 80060ec: b480 push {r7} + 80060ee: af00 add r7, sp, #0 + return SystemCoreClock; + 80060f0: 4b03 ldr r3, [pc, #12] @ (8006100 ) + 80060f2: 681b ldr r3, [r3, #0] +} + 80060f4: 4618 mov r0, r3 + 80060f6: 46bd mov sp, r7 + 80060f8: f85d 7b04 ldr.w r7, [sp], #4 + 80060fc: 4770 bx lr + 80060fe: bf00 nop + 8006100: 20000000 .word 0x20000000 + +08006104 : + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + 8006104: b580 push {r7, lr} + 8006106: af00 add r7, sp, #0 + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (APBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_Pos] & 0x1FU)); + 8006108: f7ff fff0 bl 80060ec + 800610c: 4602 mov r2, r0 + 800610e: 4b06 ldr r3, [pc, #24] @ (8006128 ) + 8006110: 689b ldr r3, [r3, #8] + 8006112: 0a1b lsrs r3, r3, #8 + 8006114: f003 0307 and.w r3, r3, #7 + 8006118: 4904 ldr r1, [pc, #16] @ (800612c ) + 800611a: 5ccb ldrb r3, [r1, r3] + 800611c: f003 031f and.w r3, r3, #31 + 8006120: fa22 f303 lsr.w r3, r2, r3 +} + 8006124: 4618 mov r0, r3 + 8006126: bd80 pop {r7, pc} + 8006128: 40021000 .word 0x40021000 + 800612c: 0800b904 .word 0x0800b904 + +08006130 : + * @note Each time PCLK2 changes, this function must be called to update the + * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK2 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK2Freq(void) +{ + 8006130: b580 push {r7, lr} + 8006132: af00 add r7, sp, #0 + /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq()>> (APBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_Pos] & 0x1FU)); + 8006134: f7ff ffda bl 80060ec + 8006138: 4602 mov r2, r0 + 800613a: 4b06 ldr r3, [pc, #24] @ (8006154 ) + 800613c: 689b ldr r3, [r3, #8] + 800613e: 0adb lsrs r3, r3, #11 + 8006140: f003 0307 and.w r3, r3, #7 + 8006144: 4904 ldr r1, [pc, #16] @ (8006158 ) + 8006146: 5ccb ldrb r3, [r1, r3] + 8006148: f003 031f and.w r3, r3, #31 + 800614c: fa22 f303 lsr.w r3, r2, r3 +} + 8006150: 4618 mov r0, r3 + 8006152: bd80 pop {r7, pc} + 8006154: 40021000 .word 0x40021000 + 8006158: 0800b904 .word 0x0800b904 + +0800615c : + voltage range. + * @param msirange MSI range value from RCC_MSIRANGE_0 to RCC_MSIRANGE_11 + * @retval HAL status + */ +static HAL_StatusTypeDef RCC_SetFlashLatencyFromMSIRange(uint32_t msirange) +{ + 800615c: b580 push {r7, lr} + 800615e: b086 sub sp, #24 + 8006160: af00 add r7, sp, #0 + 8006162: 6078 str r0, [r7, #4] + uint32_t vos; + uint32_t latency = FLASH_LATENCY_0; /* default value 0WS */ + 8006164: 2300 movs r3, #0 + 8006166: 613b str r3, [r7, #16] + + if(__HAL_RCC_PWR_IS_CLK_ENABLED()) + 8006168: 4b2a ldr r3, [pc, #168] @ (8006214 ) + 800616a: 6d9b ldr r3, [r3, #88] @ 0x58 + 800616c: f003 5380 and.w r3, r3, #268435456 @ 0x10000000 + 8006170: 2b00 cmp r3, #0 + 8006172: d003 beq.n 800617c + { + vos = HAL_PWREx_GetVoltageRange(); + 8006174: f7ff f9b6 bl 80054e4 + 8006178: 6178 str r0, [r7, #20] + 800617a: e014 b.n 80061a6 + } + else + { + __HAL_RCC_PWR_CLK_ENABLE(); + 800617c: 4b25 ldr r3, [pc, #148] @ (8006214 ) + 800617e: 6d9b ldr r3, [r3, #88] @ 0x58 + 8006180: 4a24 ldr r2, [pc, #144] @ (8006214 ) + 8006182: f043 5380 orr.w r3, r3, #268435456 @ 0x10000000 + 8006186: 6593 str r3, [r2, #88] @ 0x58 + 8006188: 4b22 ldr r3, [pc, #136] @ (8006214 ) + 800618a: 6d9b ldr r3, [r3, #88] @ 0x58 + 800618c: f003 5380 and.w r3, r3, #268435456 @ 0x10000000 + 8006190: 60fb str r3, [r7, #12] + 8006192: 68fb ldr r3, [r7, #12] + vos = HAL_PWREx_GetVoltageRange(); + 8006194: f7ff f9a6 bl 80054e4 + 8006198: 6178 str r0, [r7, #20] + __HAL_RCC_PWR_CLK_DISABLE(); + 800619a: 4b1e ldr r3, [pc, #120] @ (8006214 ) + 800619c: 6d9b ldr r3, [r3, #88] @ 0x58 + 800619e: 4a1d ldr r2, [pc, #116] @ (8006214 ) + 80061a0: f023 5380 bic.w r3, r3, #268435456 @ 0x10000000 + 80061a4: 6593 str r3, [r2, #88] @ 0x58 + } + + if(vos == PWR_REGULATOR_VOLTAGE_SCALE1) + 80061a6: 697b ldr r3, [r7, #20] + 80061a8: f5b3 7f00 cmp.w r3, #512 @ 0x200 + 80061ac: d10b bne.n 80061c6 + { + if(msirange > RCC_MSIRANGE_8) + 80061ae: 687b ldr r3, [r7, #4] + 80061b0: 2b80 cmp r3, #128 @ 0x80 + 80061b2: d919 bls.n 80061e8 + { + /* MSI > 16Mhz */ + if(msirange > RCC_MSIRANGE_10) + 80061b4: 687b ldr r3, [r7, #4] + 80061b6: 2ba0 cmp r3, #160 @ 0xa0 + 80061b8: d902 bls.n 80061c0 + { + /* MSI 48Mhz */ + latency = FLASH_LATENCY_2; /* 2WS */ + 80061ba: 2302 movs r3, #2 + 80061bc: 613b str r3, [r7, #16] + 80061be: e013 b.n 80061e8 + } + else + { + /* MSI 24Mhz or 32Mhz */ + latency = FLASH_LATENCY_1; /* 1WS */ + 80061c0: 2301 movs r3, #1 + 80061c2: 613b str r3, [r7, #16] + 80061c4: e010 b.n 80061e8 + latency = FLASH_LATENCY_1; /* 1WS */ + } + /* else MSI < 8Mhz default FLASH_LATENCY_0 0WS */ + } +#else + if(msirange > RCC_MSIRANGE_8) + 80061c6: 687b ldr r3, [r7, #4] + 80061c8: 2b80 cmp r3, #128 @ 0x80 + 80061ca: d902 bls.n 80061d2 + { + /* MSI > 16Mhz */ + latency = FLASH_LATENCY_3; /* 3WS */ + 80061cc: 2303 movs r3, #3 + 80061ce: 613b str r3, [r7, #16] + 80061d0: e00a b.n 80061e8 + } + else + { + if(msirange == RCC_MSIRANGE_8) + 80061d2: 687b ldr r3, [r7, #4] + 80061d4: 2b80 cmp r3, #128 @ 0x80 + 80061d6: d102 bne.n 80061de + { + /* MSI 16Mhz */ + latency = FLASH_LATENCY_2; /* 2WS */ + 80061d8: 2302 movs r3, #2 + 80061da: 613b str r3, [r7, #16] + 80061dc: e004 b.n 80061e8 + } + else if(msirange == RCC_MSIRANGE_7) + 80061de: 687b ldr r3, [r7, #4] + 80061e0: 2b70 cmp r3, #112 @ 0x70 + 80061e2: d101 bne.n 80061e8 + { + /* MSI 8Mhz */ + latency = FLASH_LATENCY_1; /* 1WS */ + 80061e4: 2301 movs r3, #1 + 80061e6: 613b str r3, [r7, #16] + } + } +#endif + } + + __HAL_FLASH_SET_LATENCY(latency); + 80061e8: 4b0b ldr r3, [pc, #44] @ (8006218 ) + 80061ea: 681b ldr r3, [r3, #0] + 80061ec: f023 0207 bic.w r2, r3, #7 + 80061f0: 4909 ldr r1, [pc, #36] @ (8006218 ) + 80061f2: 693b ldr r3, [r7, #16] + 80061f4: 4313 orrs r3, r2 + 80061f6: 600b str r3, [r1, #0] + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != latency) + 80061f8: 4b07 ldr r3, [pc, #28] @ (8006218 ) + 80061fa: 681b ldr r3, [r3, #0] + 80061fc: f003 0307 and.w r3, r3, #7 + 8006200: 693a ldr r2, [r7, #16] + 8006202: 429a cmp r2, r3 + 8006204: d001 beq.n 800620a + { + return HAL_ERROR; + 8006206: 2301 movs r3, #1 + 8006208: e000 b.n 800620c + } + + return HAL_OK; + 800620a: 2300 movs r3, #0 +} + 800620c: 4618 mov r0, r3 + 800620e: 3718 adds r7, #24 + 8006210: 46bd mov sp, r7 + 8006212: bd80 pop {r7, pc} + 8006214: 40021000 .word 0x40021000 + 8006218: 40022000 .word 0x40022000 + +0800621c : + * the RTC clock source: in this case the access to Backup domain is enabled. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + 800621c: b580 push {r7, lr} + 800621e: b086 sub sp, #24 + 8006220: af00 add r7, sp, #0 + 8006222: 6078 str r0, [r7, #4] + uint32_t tmpregister, tickstart; /* no init needed */ + HAL_StatusTypeDef ret = HAL_OK; /* Intermediate status */ + 8006224: 2300 movs r3, #0 + 8006226: 74fb strb r3, [r7, #19] + HAL_StatusTypeDef status = HAL_OK; /* Final status */ + 8006228: 2300 movs r3, #0 + 800622a: 74bb strb r3, [r7, #18] + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + +#if defined(SAI1) + + /*-------------------------- SAI1 clock source configuration ---------------------*/ + if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1)) + 800622c: 687b ldr r3, [r7, #4] + 800622e: 681b ldr r3, [r3, #0] + 8006230: f403 6300 and.w r3, r3, #2048 @ 0x800 + 8006234: 2b00 cmp r3, #0 + 8006236: d031 beq.n 800629c + { + /* Check the parameters */ + assert_param(IS_RCC_SAI1CLK(PeriphClkInit->Sai1ClockSelection)); + + switch(PeriphClkInit->Sai1ClockSelection) + 8006238: 687b ldr r3, [r7, #4] + 800623a: 6cdb ldr r3, [r3, #76] @ 0x4c + 800623c: f5b3 0f40 cmp.w r3, #12582912 @ 0xc00000 + 8006240: d01a beq.n 8006278 + 8006242: f5b3 0f40 cmp.w r3, #12582912 @ 0xc00000 + 8006246: d814 bhi.n 8006272 + 8006248: 2b00 cmp r3, #0 + 800624a: d009 beq.n 8006260 + 800624c: f5b3 0f00 cmp.w r3, #8388608 @ 0x800000 + 8006250: d10f bne.n 8006272 + case RCC_SAI1CLKSOURCE_PLL: /* PLL is used as clock source for SAI1*/ + /* Enable SAI Clock output generated from System PLL . */ +#if defined(RCC_PLLSAI2_SUPPORT) + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); +#else + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI2CLK); + 8006252: 4b5d ldr r3, [pc, #372] @ (80063c8 ) + 8006254: 68db ldr r3, [r3, #12] + 8006256: 4a5c ldr r2, [pc, #368] @ (80063c8 ) + 8006258: f443 3380 orr.w r3, r3, #65536 @ 0x10000 + 800625c: 60d3 str r3, [r2, #12] +#endif /* RCC_PLLSAI2_SUPPORT */ + /* SAI1 clock source config set later after clock selection check */ + break; + 800625e: e00c b.n 800627a + + case RCC_SAI1CLKSOURCE_PLLSAI1: /* PLLSAI1 is used as clock source for SAI1*/ + /* PLLSAI1 input clock, parameters M, N & P configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_P_UPDATE); + 8006260: 687b ldr r3, [r7, #4] + 8006262: 3304 adds r3, #4 + 8006264: 2100 movs r1, #0 + 8006266: 4618 mov r0, r3 + 8006268: f000 fa44 bl 80066f4 + 800626c: 4603 mov r3, r0 + 800626e: 74fb strb r3, [r7, #19] + /* SAI1 clock source config set later after clock selection check */ + break; + 8006270: e003 b.n 800627a +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + /* SAI1 clock source config set later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + 8006272: 2301 movs r3, #1 + 8006274: 74fb strb r3, [r7, #19] + break; + 8006276: e000 b.n 800627a + break; + 8006278: bf00 nop + } + + if(ret == HAL_OK) + 800627a: 7cfb ldrb r3, [r7, #19] + 800627c: 2b00 cmp r3, #0 + 800627e: d10b bne.n 8006298 + { + /* Set the source of SAI1 clock*/ + __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); + 8006280: 4b51 ldr r3, [pc, #324] @ (80063c8 ) + 8006282: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 8006286: f423 0240 bic.w r2, r3, #12582912 @ 0xc00000 + 800628a: 687b ldr r3, [r7, #4] + 800628c: 6cdb ldr r3, [r3, #76] @ 0x4c + 800628e: 494e ldr r1, [pc, #312] @ (80063c8 ) + 8006290: 4313 orrs r3, r2 + 8006292: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + 8006296: e001 b.n 800629c + } + else + { + /* set overall return value */ + status = ret; + 8006298: 7cfb ldrb r3, [r7, #19] + 800629a: 74bb strb r3, [r7, #18] + } + } +#endif /* SAI2 */ + + /*-------------------------- RTC clock source configuration ----------------------*/ + if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) + 800629c: 687b ldr r3, [r7, #4] + 800629e: 681b ldr r3, [r3, #0] + 80062a0: f403 3300 and.w r3, r3, #131072 @ 0x20000 + 80062a4: 2b00 cmp r3, #0 + 80062a6: f000 809e beq.w 80063e6 + { + FlagStatus pwrclkchanged = RESET; + 80062aa: 2300 movs r3, #0 + 80062ac: 747b strb r3, [r7, #17] + + /* Check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable Power Clock */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED() != 0U) + 80062ae: 4b46 ldr r3, [pc, #280] @ (80063c8 ) + 80062b0: 6d9b ldr r3, [r3, #88] @ 0x58 + 80062b2: f003 5380 and.w r3, r3, #268435456 @ 0x10000000 + 80062b6: 2b00 cmp r3, #0 + 80062b8: d101 bne.n 80062be + 80062ba: 2301 movs r3, #1 + 80062bc: e000 b.n 80062c0 + 80062be: 2300 movs r3, #0 + 80062c0: 2b00 cmp r3, #0 + 80062c2: d00d beq.n 80062e0 + { + __HAL_RCC_PWR_CLK_ENABLE(); + 80062c4: 4b40 ldr r3, [pc, #256] @ (80063c8 ) + 80062c6: 6d9b ldr r3, [r3, #88] @ 0x58 + 80062c8: 4a3f ldr r2, [pc, #252] @ (80063c8 ) + 80062ca: f043 5380 orr.w r3, r3, #268435456 @ 0x10000000 + 80062ce: 6593 str r3, [r2, #88] @ 0x58 + 80062d0: 4b3d ldr r3, [pc, #244] @ (80063c8 ) + 80062d2: 6d9b ldr r3, [r3, #88] @ 0x58 + 80062d4: f003 5380 and.w r3, r3, #268435456 @ 0x10000000 + 80062d8: 60bb str r3, [r7, #8] + 80062da: 68bb ldr r3, [r7, #8] + pwrclkchanged = SET; + 80062dc: 2301 movs r3, #1 + 80062de: 747b strb r3, [r7, #17] + } + + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + 80062e0: 4b3a ldr r3, [pc, #232] @ (80063cc ) + 80062e2: 681b ldr r3, [r3, #0] + 80062e4: 4a39 ldr r2, [pc, #228] @ (80063cc ) + 80062e6: f443 7380 orr.w r3, r3, #256 @ 0x100 + 80062ea: 6013 str r3, [r2, #0] + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + 80062ec: f7fd ff16 bl 800411c + 80062f0: 60f8 str r0, [r7, #12] + + while(READ_BIT(PWR->CR1, PWR_CR1_DBP) == 0U) + 80062f2: e009 b.n 8006308 + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + 80062f4: f7fd ff12 bl 800411c + 80062f8: 4602 mov r2, r0 + 80062fa: 68fb ldr r3, [r7, #12] + 80062fc: 1ad3 subs r3, r2, r3 + 80062fe: 2b02 cmp r3, #2 + 8006300: d902 bls.n 8006308 + { + ret = HAL_TIMEOUT; + 8006302: 2303 movs r3, #3 + 8006304: 74fb strb r3, [r7, #19] + break; + 8006306: e005 b.n 8006314 + while(READ_BIT(PWR->CR1, PWR_CR1_DBP) == 0U) + 8006308: 4b30 ldr r3, [pc, #192] @ (80063cc ) + 800630a: 681b ldr r3, [r3, #0] + 800630c: f403 7380 and.w r3, r3, #256 @ 0x100 + 8006310: 2b00 cmp r3, #0 + 8006312: d0ef beq.n 80062f4 + } + } + + if(ret == HAL_OK) + 8006314: 7cfb ldrb r3, [r7, #19] + 8006316: 2b00 cmp r3, #0 + 8006318: d15a bne.n 80063d0 + { + /* Reset the Backup domain only if the RTC Clock source selection is modified from default */ + tmpregister = READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL); + 800631a: 4b2b ldr r3, [pc, #172] @ (80063c8 ) + 800631c: f8d3 3090 ldr.w r3, [r3, #144] @ 0x90 + 8006320: f403 7340 and.w r3, r3, #768 @ 0x300 + 8006324: 617b str r3, [r7, #20] + + if((tmpregister != RCC_RTCCLKSOURCE_NONE) && (tmpregister != PeriphClkInit->RTCClockSelection)) + 8006326: 697b ldr r3, [r7, #20] + 8006328: 2b00 cmp r3, #0 + 800632a: d01e beq.n 800636a + 800632c: 687b ldr r3, [r7, #4] + 800632e: 6e5b ldr r3, [r3, #100] @ 0x64 + 8006330: 697a ldr r2, [r7, #20] + 8006332: 429a cmp r2, r3 + 8006334: d019 beq.n 800636a + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpregister = READ_BIT(RCC->BDCR, ~(RCC_BDCR_RTCSEL)); + 8006336: 4b24 ldr r3, [pc, #144] @ (80063c8 ) + 8006338: f8d3 3090 ldr.w r3, [r3, #144] @ 0x90 + 800633c: f423 7340 bic.w r3, r3, #768 @ 0x300 + 8006340: 617b str r3, [r7, #20] + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + 8006342: 4b21 ldr r3, [pc, #132] @ (80063c8 ) + 8006344: f8d3 3090 ldr.w r3, [r3, #144] @ 0x90 + 8006348: 4a1f ldr r2, [pc, #124] @ (80063c8 ) + 800634a: f443 3380 orr.w r3, r3, #65536 @ 0x10000 + 800634e: f8c2 3090 str.w r3, [r2, #144] @ 0x90 + __HAL_RCC_BACKUPRESET_RELEASE(); + 8006352: 4b1d ldr r3, [pc, #116] @ (80063c8 ) + 8006354: f8d3 3090 ldr.w r3, [r3, #144] @ 0x90 + 8006358: 4a1b ldr r2, [pc, #108] @ (80063c8 ) + 800635a: f423 3380 bic.w r3, r3, #65536 @ 0x10000 + 800635e: f8c2 3090 str.w r3, [r2, #144] @ 0x90 + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpregister; + 8006362: 4a19 ldr r2, [pc, #100] @ (80063c8 ) + 8006364: 697b ldr r3, [r7, #20] + 8006366: f8c2 3090 str.w r3, [r2, #144] @ 0x90 + } + + /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ + if (HAL_IS_BIT_SET(tmpregister, RCC_BDCR_LSEON)) + 800636a: 697b ldr r3, [r7, #20] + 800636c: f003 0301 and.w r3, r3, #1 + 8006370: 2b00 cmp r3, #0 + 8006372: d016 beq.n 80063a2 + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 8006374: f7fd fed2 bl 800411c + 8006378: 60f8 str r0, [r7, #12] + + /* Wait till LSE is ready */ + while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + 800637a: e00b b.n 8006394 + { + if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + 800637c: f7fd fece bl 800411c + 8006380: 4602 mov r2, r0 + 8006382: 68fb ldr r3, [r7, #12] + 8006384: 1ad3 subs r3, r2, r3 + 8006386: f241 3288 movw r2, #5000 @ 0x1388 + 800638a: 4293 cmp r3, r2 + 800638c: d902 bls.n 8006394 + { + ret = HAL_TIMEOUT; + 800638e: 2303 movs r3, #3 + 8006390: 74fb strb r3, [r7, #19] + break; + 8006392: e006 b.n 80063a2 + while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + 8006394: 4b0c ldr r3, [pc, #48] @ (80063c8 ) + 8006396: f8d3 3090 ldr.w r3, [r3, #144] @ 0x90 + 800639a: f003 0302 and.w r3, r3, #2 + 800639e: 2b00 cmp r3, #0 + 80063a0: d0ec beq.n 800637c + } + } + } + + if(ret == HAL_OK) + 80063a2: 7cfb ldrb r3, [r7, #19] + 80063a4: 2b00 cmp r3, #0 + 80063a6: d10b bne.n 80063c0 + { + /* Apply new RTC clock source selection */ + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + 80063a8: 4b07 ldr r3, [pc, #28] @ (80063c8 ) + 80063aa: f8d3 3090 ldr.w r3, [r3, #144] @ 0x90 + 80063ae: f423 7240 bic.w r2, r3, #768 @ 0x300 + 80063b2: 687b ldr r3, [r7, #4] + 80063b4: 6e5b ldr r3, [r3, #100] @ 0x64 + 80063b6: 4904 ldr r1, [pc, #16] @ (80063c8 ) + 80063b8: 4313 orrs r3, r2 + 80063ba: f8c1 3090 str.w r3, [r1, #144] @ 0x90 + 80063be: e009 b.n 80063d4 + } + else + { + /* set overall return value */ + status = ret; + 80063c0: 7cfb ldrb r3, [r7, #19] + 80063c2: 74bb strb r3, [r7, #18] + 80063c4: e006 b.n 80063d4 + 80063c6: bf00 nop + 80063c8: 40021000 .word 0x40021000 + 80063cc: 40007000 .word 0x40007000 + } + } + else + { + /* set overall return value */ + status = ret; + 80063d0: 7cfb ldrb r3, [r7, #19] + 80063d2: 74bb strb r3, [r7, #18] + } + + /* Restore clock configuration if changed */ + if(pwrclkchanged == SET) + 80063d4: 7c7b ldrb r3, [r7, #17] + 80063d6: 2b01 cmp r3, #1 + 80063d8: d105 bne.n 80063e6 + { + __HAL_RCC_PWR_CLK_DISABLE(); + 80063da: 4b9e ldr r3, [pc, #632] @ (8006654 ) + 80063dc: 6d9b ldr r3, [r3, #88] @ 0x58 + 80063de: 4a9d ldr r2, [pc, #628] @ (8006654 ) + 80063e0: f023 5380 bic.w r3, r3, #268435456 @ 0x10000000 + 80063e4: 6593 str r3, [r2, #88] @ 0x58 + } + } + + /*-------------------------- USART1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) + 80063e6: 687b ldr r3, [r7, #4] + 80063e8: 681b ldr r3, [r3, #0] + 80063ea: f003 0301 and.w r3, r3, #1 + 80063ee: 2b00 cmp r3, #0 + 80063f0: d00a beq.n 8006408 + { + /* Check the parameters */ + assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); + + /* Configure the USART1 clock source */ + __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); + 80063f2: 4b98 ldr r3, [pc, #608] @ (8006654 ) + 80063f4: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 80063f8: f023 0203 bic.w r2, r3, #3 + 80063fc: 687b ldr r3, [r7, #4] + 80063fe: 6a1b ldr r3, [r3, #32] + 8006400: 4994 ldr r1, [pc, #592] @ (8006654 ) + 8006402: 4313 orrs r3, r2 + 8006404: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + } + + /*-------------------------- USART2 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) + 8006408: 687b ldr r3, [r7, #4] + 800640a: 681b ldr r3, [r3, #0] + 800640c: f003 0302 and.w r3, r3, #2 + 8006410: 2b00 cmp r3, #0 + 8006412: d00a beq.n 800642a + { + /* Check the parameters */ + assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection)); + + /* Configure the USART2 clock source */ + __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection); + 8006414: 4b8f ldr r3, [pc, #572] @ (8006654 ) + 8006416: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 800641a: f023 020c bic.w r2, r3, #12 + 800641e: 687b ldr r3, [r7, #4] + 8006420: 6a5b ldr r3, [r3, #36] @ 0x24 + 8006422: 498c ldr r1, [pc, #560] @ (8006654 ) + 8006424: 4313 orrs r3, r2 + 8006426: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + } + +#if defined(USART3) + + /*-------------------------- USART3 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) + 800642a: 687b ldr r3, [r7, #4] + 800642c: 681b ldr r3, [r3, #0] + 800642e: f003 0304 and.w r3, r3, #4 + 8006432: 2b00 cmp r3, #0 + 8006434: d00a beq.n 800644c + { + /* Check the parameters */ + assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection)); + + /* Configure the USART3 clock source */ + __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); + 8006436: 4b87 ldr r3, [pc, #540] @ (8006654 ) + 8006438: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 800643c: f023 0230 bic.w r2, r3, #48 @ 0x30 + 8006440: 687b ldr r3, [r7, #4] + 8006442: 6a9b ldr r3, [r3, #40] @ 0x28 + 8006444: 4983 ldr r1, [pc, #524] @ (8006654 ) + 8006446: 4313 orrs r3, r2 + 8006448: f8c1 3088 str.w r3, [r1, #136] @ 0x88 +#endif /* USART3 */ + +#if defined(UART4) + + /*-------------------------- UART4 clock source configuration --------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) + 800644c: 687b ldr r3, [r7, #4] + 800644e: 681b ldr r3, [r3, #0] + 8006450: f003 0308 and.w r3, r3, #8 + 8006454: 2b00 cmp r3, #0 + 8006456: d00a beq.n 800646e + { + /* Check the parameters */ + assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection)); + + /* Configure the UART4 clock source */ + __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection); + 8006458: 4b7e ldr r3, [pc, #504] @ (8006654 ) + 800645a: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 800645e: f023 02c0 bic.w r2, r3, #192 @ 0xc0 + 8006462: 687b ldr r3, [r7, #4] + 8006464: 6adb ldr r3, [r3, #44] @ 0x2c + 8006466: 497b ldr r1, [pc, #492] @ (8006654 ) + 8006468: 4313 orrs r3, r2 + 800646a: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + } + +#endif /* UART5 */ + + /*-------------------------- LPUART1 clock source configuration ------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) + 800646e: 687b ldr r3, [r7, #4] + 8006470: 681b ldr r3, [r3, #0] + 8006472: f003 0320 and.w r3, r3, #32 + 8006476: 2b00 cmp r3, #0 + 8006478: d00a beq.n 8006490 + { + /* Check the parameters */ + assert_param(IS_RCC_LPUART1CLKSOURCE(PeriphClkInit->Lpuart1ClockSelection)); + + /* Configure the LPUART1 clock source */ + __HAL_RCC_LPUART1_CONFIG(PeriphClkInit->Lpuart1ClockSelection); + 800647a: 4b76 ldr r3, [pc, #472] @ (8006654 ) + 800647c: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 8006480: f423 6240 bic.w r2, r3, #3072 @ 0xc00 + 8006484: 687b ldr r3, [r7, #4] + 8006486: 6b1b ldr r3, [r3, #48] @ 0x30 + 8006488: 4972 ldr r1, [pc, #456] @ (8006654 ) + 800648a: 4313 orrs r3, r2 + 800648c: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + } + + /*-------------------------- LPTIM1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == (RCC_PERIPHCLK_LPTIM1)) + 8006490: 687b ldr r3, [r7, #4] + 8006492: 681b ldr r3, [r3, #0] + 8006494: f403 7300 and.w r3, r3, #512 @ 0x200 + 8006498: 2b00 cmp r3, #0 + 800649a: d00a beq.n 80064b2 + { + assert_param(IS_RCC_LPTIM1CLK(PeriphClkInit->Lptim1ClockSelection)); + __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); + 800649c: 4b6d ldr r3, [pc, #436] @ (8006654 ) + 800649e: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 80064a2: f423 2240 bic.w r2, r3, #786432 @ 0xc0000 + 80064a6: 687b ldr r3, [r7, #4] + 80064a8: 6c5b ldr r3, [r3, #68] @ 0x44 + 80064aa: 496a ldr r1, [pc, #424] @ (8006654 ) + 80064ac: 4313 orrs r3, r2 + 80064ae: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + } + + /*-------------------------- LPTIM2 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM2) == (RCC_PERIPHCLK_LPTIM2)) + 80064b2: 687b ldr r3, [r7, #4] + 80064b4: 681b ldr r3, [r3, #0] + 80064b6: f403 6380 and.w r3, r3, #1024 @ 0x400 + 80064ba: 2b00 cmp r3, #0 + 80064bc: d00a beq.n 80064d4 + { + assert_param(IS_RCC_LPTIM2CLK(PeriphClkInit->Lptim2ClockSelection)); + __HAL_RCC_LPTIM2_CONFIG(PeriphClkInit->Lptim2ClockSelection); + 80064be: 4b65 ldr r3, [pc, #404] @ (8006654 ) + 80064c0: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 80064c4: f423 1240 bic.w r2, r3, #3145728 @ 0x300000 + 80064c8: 687b ldr r3, [r7, #4] + 80064ca: 6c9b ldr r3, [r3, #72] @ 0x48 + 80064cc: 4961 ldr r1, [pc, #388] @ (8006654 ) + 80064ce: 4313 orrs r3, r2 + 80064d0: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + } + + /*-------------------------- I2C1 clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) + 80064d4: 687b ldr r3, [r7, #4] + 80064d6: 681b ldr r3, [r3, #0] + 80064d8: f003 0340 and.w r3, r3, #64 @ 0x40 + 80064dc: 2b00 cmp r3, #0 + 80064de: d00a beq.n 80064f6 + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); + + /* Configure the I2C1 clock source */ + __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); + 80064e0: 4b5c ldr r3, [pc, #368] @ (8006654 ) + 80064e2: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 80064e6: f423 5240 bic.w r2, r3, #12288 @ 0x3000 + 80064ea: 687b ldr r3, [r7, #4] + 80064ec: 6b5b ldr r3, [r3, #52] @ 0x34 + 80064ee: 4959 ldr r1, [pc, #356] @ (8006654 ) + 80064f0: 4313 orrs r3, r2 + 80064f2: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + } + +#if defined(I2C2) + + /*-------------------------- I2C2 clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) + 80064f6: 687b ldr r3, [r7, #4] + 80064f8: 681b ldr r3, [r3, #0] + 80064fa: f003 0380 and.w r3, r3, #128 @ 0x80 + 80064fe: 2b00 cmp r3, #0 + 8006500: d00a beq.n 8006518 + { + /* Check the parameters */ + assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection)); + + /* Configure the I2C2 clock source */ + __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection); + 8006502: 4b54 ldr r3, [pc, #336] @ (8006654 ) + 8006504: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 8006508: f423 4240 bic.w r2, r3, #49152 @ 0xc000 + 800650c: 687b ldr r3, [r7, #4] + 800650e: 6b9b ldr r3, [r3, #56] @ 0x38 + 8006510: 4950 ldr r1, [pc, #320] @ (8006654 ) + 8006512: 4313 orrs r3, r2 + 8006514: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + } + +#endif /* I2C2 */ + + /*-------------------------- I2C3 clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) + 8006518: 687b ldr r3, [r7, #4] + 800651a: 681b ldr r3, [r3, #0] + 800651c: f403 7380 and.w r3, r3, #256 @ 0x100 + 8006520: 2b00 cmp r3, #0 + 8006522: d00a beq.n 800653a + { + /* Check the parameters */ + assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection)); + + /* Configure the I2C3 clock source */ + __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection); + 8006524: 4b4b ldr r3, [pc, #300] @ (8006654 ) + 8006526: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 800652a: f423 3240 bic.w r2, r3, #196608 @ 0x30000 + 800652e: 687b ldr r3, [r7, #4] + 8006530: 6bdb ldr r3, [r3, #60] @ 0x3c + 8006532: 4948 ldr r1, [pc, #288] @ (8006654 ) + 8006534: 4313 orrs r3, r2 + 8006536: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + } + +#if defined(I2C4) + + /*-------------------------- I2C4 clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) + 800653a: 687b ldr r3, [r7, #4] + 800653c: 681b ldr r3, [r3, #0] + 800653e: f403 1380 and.w r3, r3, #1048576 @ 0x100000 + 8006542: 2b00 cmp r3, #0 + 8006544: d00a beq.n 800655c + { + /* Check the parameters */ + assert_param(IS_RCC_I2C4CLKSOURCE(PeriphClkInit->I2c4ClockSelection)); + + /* Configure the I2C4 clock source */ + __HAL_RCC_I2C4_CONFIG(PeriphClkInit->I2c4ClockSelection); + 8006546: 4b43 ldr r3, [pc, #268] @ (8006654 ) + 8006548: f8d3 309c ldr.w r3, [r3, #156] @ 0x9c + 800654c: f023 0203 bic.w r2, r3, #3 + 8006550: 687b ldr r3, [r7, #4] + 8006552: 6c1b ldr r3, [r3, #64] @ 0x40 + 8006554: 493f ldr r1, [pc, #252] @ (8006654 ) + 8006556: 4313 orrs r3, r2 + 8006558: f8c1 309c str.w r3, [r1, #156] @ 0x9c +#endif /* I2C4 */ + +#if defined(USB_OTG_FS) || defined(USB) + + /*-------------------------- USB clock source configuration ----------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == (RCC_PERIPHCLK_USB)) + 800655c: 687b ldr r3, [r7, #4] + 800655e: 681b ldr r3, [r3, #0] + 8006560: f403 5300 and.w r3, r3, #8192 @ 0x2000 + 8006564: 2b00 cmp r3, #0 + 8006566: d028 beq.n 80065ba + { + assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->UsbClockSelection)); + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + 8006568: 4b3a ldr r3, [pc, #232] @ (8006654 ) + 800656a: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 800656e: f023 6240 bic.w r2, r3, #201326592 @ 0xc000000 + 8006572: 687b ldr r3, [r7, #4] + 8006574: 6d1b ldr r3, [r3, #80] @ 0x50 + 8006576: 4937 ldr r1, [pc, #220] @ (8006654 ) + 8006578: 4313 orrs r3, r2 + 800657a: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + + if(PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLL) + 800657e: 687b ldr r3, [r7, #4] + 8006580: 6d1b ldr r3, [r3, #80] @ 0x50 + 8006582: f1b3 6f00 cmp.w r3, #134217728 @ 0x8000000 + 8006586: d106 bne.n 8006596 + { + /* Enable PLL48M1CLK output clock */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); + 8006588: 4b32 ldr r3, [pc, #200] @ (8006654 ) + 800658a: 68db ldr r3, [r3, #12] + 800658c: 4a31 ldr r2, [pc, #196] @ (8006654 ) + 800658e: f443 1380 orr.w r3, r3, #1048576 @ 0x100000 + 8006592: 60d3 str r3, [r2, #12] + 8006594: e011 b.n 80065ba + } + else + { +#if defined(RCC_PLLSAI1_SUPPORT) + if(PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLLSAI1) + 8006596: 687b ldr r3, [r7, #4] + 8006598: 6d1b ldr r3, [r3, #80] @ 0x50 + 800659a: f1b3 6f80 cmp.w r3, #67108864 @ 0x4000000 + 800659e: d10c bne.n 80065ba + { + /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); + 80065a0: 687b ldr r3, [r7, #4] + 80065a2: 3304 adds r3, #4 + 80065a4: 2101 movs r1, #1 + 80065a6: 4618 mov r0, r3 + 80065a8: f000 f8a4 bl 80066f4 + 80065ac: 4603 mov r3, r0 + 80065ae: 74fb strb r3, [r7, #19] + + if(ret != HAL_OK) + 80065b0: 7cfb ldrb r3, [r7, #19] + 80065b2: 2b00 cmp r3, #0 + 80065b4: d001 beq.n 80065ba + { + /* set overall return value */ + status = ret; + 80065b6: 7cfb ldrb r3, [r7, #19] + 80065b8: 74bb strb r3, [r7, #18] +#endif /* USB_OTG_FS || USB */ + +#if defined(SDMMC1) + + /*-------------------------- SDMMC1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC1) == (RCC_PERIPHCLK_SDMMC1)) + 80065ba: 687b ldr r3, [r7, #4] + 80065bc: 681b ldr r3, [r3, #0] + 80065be: f403 2300 and.w r3, r3, #524288 @ 0x80000 + 80065c2: 2b00 cmp r3, #0 + 80065c4: d028 beq.n 8006618 + { + assert_param(IS_RCC_SDMMC1CLKSOURCE(PeriphClkInit->Sdmmc1ClockSelection)); + __HAL_RCC_SDMMC1_CONFIG(PeriphClkInit->Sdmmc1ClockSelection); + 80065c6: 4b23 ldr r3, [pc, #140] @ (8006654 ) + 80065c8: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 80065cc: f023 6240 bic.w r2, r3, #201326592 @ 0xc000000 + 80065d0: 687b ldr r3, [r7, #4] + 80065d2: 6d5b ldr r3, [r3, #84] @ 0x54 + 80065d4: 491f ldr r1, [pc, #124] @ (8006654 ) + 80065d6: 4313 orrs r3, r2 + 80065d8: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + + if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLL) /* PLL "Q" ? */ + 80065dc: 687b ldr r3, [r7, #4] + 80065de: 6d5b ldr r3, [r3, #84] @ 0x54 + 80065e0: f1b3 6f00 cmp.w r3, #134217728 @ 0x8000000 + 80065e4: d106 bne.n 80065f4 + { + /* Enable PLL48M1CLK output clock */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); + 80065e6: 4b1b ldr r3, [pc, #108] @ (8006654 ) + 80065e8: 68db ldr r3, [r3, #12] + 80065ea: 4a1a ldr r2, [pc, #104] @ (8006654 ) + 80065ec: f443 1380 orr.w r3, r3, #1048576 @ 0x100000 + 80065f0: 60d3 str r3, [r2, #12] + 80065f2: e011 b.n 8006618 + { + /* Enable PLLSAI3CLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); + } +#endif + else if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLLSAI1) + 80065f4: 687b ldr r3, [r7, #4] + 80065f6: 6d5b ldr r3, [r3, #84] @ 0x54 + 80065f8: f1b3 6f80 cmp.w r3, #67108864 @ 0x4000000 + 80065fc: d10c bne.n 8006618 + { + /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); + 80065fe: 687b ldr r3, [r7, #4] + 8006600: 3304 adds r3, #4 + 8006602: 2101 movs r1, #1 + 8006604: 4618 mov r0, r3 + 8006606: f000 f875 bl 80066f4 + 800660a: 4603 mov r3, r0 + 800660c: 74fb strb r3, [r7, #19] + + if(ret != HAL_OK) + 800660e: 7cfb ldrb r3, [r7, #19] + 8006610: 2b00 cmp r3, #0 + 8006612: d001 beq.n 8006618 + { + /* set overall return value */ + status = ret; + 8006614: 7cfb ldrb r3, [r7, #19] + 8006616: 74bb strb r3, [r7, #18] + } + +#endif /* SDMMC1 */ + + /*-------------------------- RNG clock source configuration ----------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RNG) == (RCC_PERIPHCLK_RNG)) + 8006618: 687b ldr r3, [r7, #4] + 800661a: 681b ldr r3, [r3, #0] + 800661c: f403 2380 and.w r3, r3, #262144 @ 0x40000 + 8006620: 2b00 cmp r3, #0 + 8006622: d02b beq.n 800667c + { + assert_param(IS_RCC_RNGCLKSOURCE(PeriphClkInit->RngClockSelection)); + __HAL_RCC_RNG_CONFIG(PeriphClkInit->RngClockSelection); + 8006624: 4b0b ldr r3, [pc, #44] @ (8006654 ) + 8006626: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 800662a: f023 6240 bic.w r2, r3, #201326592 @ 0xc000000 + 800662e: 687b ldr r3, [r7, #4] + 8006630: 6d9b ldr r3, [r3, #88] @ 0x58 + 8006632: 4908 ldr r1, [pc, #32] @ (8006654 ) + 8006634: 4313 orrs r3, r2 + 8006636: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + + if(PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLL) + 800663a: 687b ldr r3, [r7, #4] + 800663c: 6d9b ldr r3, [r3, #88] @ 0x58 + 800663e: f1b3 6f00 cmp.w r3, #134217728 @ 0x8000000 + 8006642: d109 bne.n 8006658 + { + /* Enable PLL48M1CLK output clock */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); + 8006644: 4b03 ldr r3, [pc, #12] @ (8006654 ) + 8006646: 68db ldr r3, [r3, #12] + 8006648: 4a02 ldr r2, [pc, #8] @ (8006654 ) + 800664a: f443 1380 orr.w r3, r3, #1048576 @ 0x100000 + 800664e: 60d3 str r3, [r2, #12] + 8006650: e014 b.n 800667c + 8006652: bf00 nop + 8006654: 40021000 .word 0x40021000 + } +#if defined(RCC_PLLSAI1_SUPPORT) + else if(PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLLSAI1) + 8006658: 687b ldr r3, [r7, #4] + 800665a: 6d9b ldr r3, [r3, #88] @ 0x58 + 800665c: f1b3 6f80 cmp.w r3, #67108864 @ 0x4000000 + 8006660: d10c bne.n 800667c + { + /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); + 8006662: 687b ldr r3, [r7, #4] + 8006664: 3304 adds r3, #4 + 8006666: 2101 movs r1, #1 + 8006668: 4618 mov r0, r3 + 800666a: f000 f843 bl 80066f4 + 800666e: 4603 mov r3, r0 + 8006670: 74fb strb r3, [r7, #19] + + if(ret != HAL_OK) + 8006672: 7cfb ldrb r3, [r7, #19] + 8006674: 2b00 cmp r3, #0 + 8006676: d001 beq.n 800667c + { + /* set overall return value */ + status = ret; + 8006678: 7cfb ldrb r3, [r7, #19] + 800667a: 74bb strb r3, [r7, #18] + } + } + + /*-------------------------- ADC clock source configuration ----------------------*/ +#if !defined(STM32L412xx) && !defined(STM32L422xx) + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + 800667c: 687b ldr r3, [r7, #4] + 800667e: 681b ldr r3, [r3, #0] + 8006680: f403 4380 and.w r3, r3, #16384 @ 0x4000 + 8006684: 2b00 cmp r3, #0 + 8006686: d01c beq.n 80066c2 + { + /* Check the parameters */ + assert_param(IS_RCC_ADCCLKSOURCE(PeriphClkInit->AdcClockSelection)); + + /* Configure the ADC interface clock source */ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + 8006688: 4b19 ldr r3, [pc, #100] @ (80066f0 ) + 800668a: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 800668e: f023 5240 bic.w r2, r3, #805306368 @ 0x30000000 + 8006692: 687b ldr r3, [r7, #4] + 8006694: 6ddb ldr r3, [r3, #92] @ 0x5c + 8006696: 4916 ldr r1, [pc, #88] @ (80066f0 ) + 8006698: 4313 orrs r3, r2 + 800669a: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + +#if defined(RCC_PLLSAI1_SUPPORT) + if(PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLSAI1) + 800669e: 687b ldr r3, [r7, #4] + 80066a0: 6ddb ldr r3, [r3, #92] @ 0x5c + 80066a2: f1b3 5f80 cmp.w r3, #268435456 @ 0x10000000 + 80066a6: d10c bne.n 80066c2 + { + /* PLLSAI1 input clock, parameters M, N & R configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_R_UPDATE); + 80066a8: 687b ldr r3, [r7, #4] + 80066aa: 3304 adds r3, #4 + 80066ac: 2102 movs r1, #2 + 80066ae: 4618 mov r0, r3 + 80066b0: f000 f820 bl 80066f4 + 80066b4: 4603 mov r3, r0 + 80066b6: 74fb strb r3, [r7, #19] + + if(ret != HAL_OK) + 80066b8: 7cfb ldrb r3, [r7, #19] + 80066ba: 2b00 cmp r3, #0 + 80066bc: d001 beq.n 80066c2 + { + /* set overall return value */ + status = ret; + 80066be: 7cfb ldrb r3, [r7, #19] + 80066c0: 74bb strb r3, [r7, #18] +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Filter0) + + /*-------------------------- DFSDM1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) + 80066c2: 687b ldr r3, [r7, #4] + 80066c4: 681b ldr r3, [r3, #0] + 80066c6: f403 3380 and.w r3, r3, #65536 @ 0x10000 + 80066ca: 2b00 cmp r3, #0 + 80066cc: d00a beq.n 80066e4 + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection)); + + /* Configure the DFSDM1 interface clock source */ + __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection); + 80066ce: 4b08 ldr r3, [pc, #32] @ (80066f0 ) + 80066d0: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 80066d4: f023 4200 bic.w r2, r3, #2147483648 @ 0x80000000 + 80066d8: 687b ldr r3, [r7, #4] + 80066da: 6e1b ldr r3, [r3, #96] @ 0x60 + 80066dc: 4904 ldr r1, [pc, #16] @ (80066f0 ) + 80066de: 4313 orrs r3, r2 + 80066e0: f8c1 3088 str.w r3, [r1, #136] @ 0x88 + } + } + +#endif /* OCTOSPI1 || OCTOSPI2 */ + + return status; + 80066e4: 7cbb ldrb r3, [r7, #18] +} + 80066e6: 4618 mov r0, r3 + 80066e8: 3718 adds r7, #24 + 80066ea: 46bd mov sp, r7 + 80066ec: bd80 pop {r7, pc} + 80066ee: bf00 nop + 80066f0: 40021000 .word 0x40021000 + +080066f4 : + * @note PLLSAI1 is temporary disable to apply new parameters + * + * @retval HAL status + */ +static HAL_StatusTypeDef RCCEx_PLLSAI1_Config(RCC_PLLSAI1InitTypeDef *PllSai1, uint32_t Divider) +{ + 80066f4: b580 push {r7, lr} + 80066f6: b084 sub sp, #16 + 80066f8: af00 add r7, sp, #0 + 80066fa: 6078 str r0, [r7, #4] + 80066fc: 6039 str r1, [r7, #0] + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + 80066fe: 2300 movs r3, #0 + 8006700: 73fb strb r3, [r7, #15] + assert_param(IS_RCC_PLLSAI1M_VALUE(PllSai1->PLLSAI1M)); + assert_param(IS_RCC_PLLSAI1N_VALUE(PllSai1->PLLSAI1N)); + assert_param(IS_RCC_PLLSAI1CLOCKOUT_VALUE(PllSai1->PLLSAI1ClockOut)); + + /* Check that PLLSAI1 clock source and divider M can be applied */ + if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_NONE) + 8006702: 4b74 ldr r3, [pc, #464] @ (80068d4 ) + 8006704: 68db ldr r3, [r3, #12] + 8006706: f003 0303 and.w r3, r3, #3 + 800670a: 2b00 cmp r3, #0 + 800670c: d018 beq.n 8006740 + { + /* PLL clock source and divider M already set, check that no request for change */ + if((__HAL_RCC_GET_PLL_OSCSOURCE() != PllSai1->PLLSAI1Source) + 800670e: 4b71 ldr r3, [pc, #452] @ (80068d4 ) + 8006710: 68db ldr r3, [r3, #12] + 8006712: f003 0203 and.w r2, r3, #3 + 8006716: 687b ldr r3, [r7, #4] + 8006718: 681b ldr r3, [r3, #0] + 800671a: 429a cmp r2, r3 + 800671c: d10d bne.n 800673a + || + (PllSai1->PLLSAI1Source == RCC_PLLSOURCE_NONE) + 800671e: 687b ldr r3, [r7, #4] + 8006720: 681b ldr r3, [r3, #0] + || + 8006722: 2b00 cmp r3, #0 + 8006724: d009 beq.n 800673a +#if !defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + || + (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U) != PllSai1->PLLSAI1M) + 8006726: 4b6b ldr r3, [pc, #428] @ (80068d4 ) + 8006728: 68db ldr r3, [r3, #12] + 800672a: 091b lsrs r3, r3, #4 + 800672c: f003 0307 and.w r3, r3, #7 + 8006730: 1c5a adds r2, r3, #1 + 8006732: 687b ldr r3, [r7, #4] + 8006734: 685b ldr r3, [r3, #4] + || + 8006736: 429a cmp r2, r3 + 8006738: d047 beq.n 80067ca +#endif + ) + { + status = HAL_ERROR; + 800673a: 2301 movs r3, #1 + 800673c: 73fb strb r3, [r7, #15] + 800673e: e044 b.n 80067ca + } + } + else + { + /* Check PLLSAI1 clock source availability */ + switch(PllSai1->PLLSAI1Source) + 8006740: 687b ldr r3, [r7, #4] + 8006742: 681b ldr r3, [r3, #0] + 8006744: 2b03 cmp r3, #3 + 8006746: d018 beq.n 800677a + 8006748: 2b03 cmp r3, #3 + 800674a: d825 bhi.n 8006798 + 800674c: 2b01 cmp r3, #1 + 800674e: d002 beq.n 8006756 + 8006750: 2b02 cmp r3, #2 + 8006752: d009 beq.n 8006768 + 8006754: e020 b.n 8006798 + { + case RCC_PLLSOURCE_MSI: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_MSIRDY)) + 8006756: 4b5f ldr r3, [pc, #380] @ (80068d4 ) + 8006758: 681b ldr r3, [r3, #0] + 800675a: f003 0302 and.w r3, r3, #2 + 800675e: 2b00 cmp r3, #0 + 8006760: d11d bne.n 800679e + { + status = HAL_ERROR; + 8006762: 2301 movs r3, #1 + 8006764: 73fb strb r3, [r7, #15] + } + break; + 8006766: e01a b.n 800679e + case RCC_PLLSOURCE_HSI: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSIRDY)) + 8006768: 4b5a ldr r3, [pc, #360] @ (80068d4 ) + 800676a: 681b ldr r3, [r3, #0] + 800676c: f403 6380 and.w r3, r3, #1024 @ 0x400 + 8006770: 2b00 cmp r3, #0 + 8006772: d116 bne.n 80067a2 + { + status = HAL_ERROR; + 8006774: 2301 movs r3, #1 + 8006776: 73fb strb r3, [r7, #15] + } + break; + 8006778: e013 b.n 80067a2 + case RCC_PLLSOURCE_HSE: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSERDY)) + 800677a: 4b56 ldr r3, [pc, #344] @ (80068d4 ) + 800677c: 681b ldr r3, [r3, #0] + 800677e: f403 3300 and.w r3, r3, #131072 @ 0x20000 + 8006782: 2b00 cmp r3, #0 + 8006784: d10f bne.n 80067a6 + { + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSEBYP)) + 8006786: 4b53 ldr r3, [pc, #332] @ (80068d4 ) + 8006788: 681b ldr r3, [r3, #0] + 800678a: f403 2380 and.w r3, r3, #262144 @ 0x40000 + 800678e: 2b00 cmp r3, #0 + 8006790: d109 bne.n 80067a6 + { + status = HAL_ERROR; + 8006792: 2301 movs r3, #1 + 8006794: 73fb strb r3, [r7, #15] + } + } + break; + 8006796: e006 b.n 80067a6 + default: + status = HAL_ERROR; + 8006798: 2301 movs r3, #1 + 800679a: 73fb strb r3, [r7, #15] + break; + 800679c: e004 b.n 80067a8 + break; + 800679e: bf00 nop + 80067a0: e002 b.n 80067a8 + break; + 80067a2: bf00 nop + 80067a4: e000 b.n 80067a8 + break; + 80067a6: bf00 nop + } + + if(status == HAL_OK) + 80067a8: 7bfb ldrb r3, [r7, #15] + 80067aa: 2b00 cmp r3, #0 + 80067ac: d10d bne.n 80067ca +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* Set PLLSAI1 clock source */ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PllSai1->PLLSAI1Source); +#else + /* Set PLLSAI1 clock source and divider M */ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, PllSai1->PLLSAI1Source | (PllSai1->PLLSAI1M - 1U) << RCC_PLLCFGR_PLLM_Pos); + 80067ae: 4b49 ldr r3, [pc, #292] @ (80068d4 ) + 80067b0: 68db ldr r3, [r3, #12] + 80067b2: f023 0273 bic.w r2, r3, #115 @ 0x73 + 80067b6: 687b ldr r3, [r7, #4] + 80067b8: 6819 ldr r1, [r3, #0] + 80067ba: 687b ldr r3, [r7, #4] + 80067bc: 685b ldr r3, [r3, #4] + 80067be: 3b01 subs r3, #1 + 80067c0: 011b lsls r3, r3, #4 + 80067c2: 430b orrs r3, r1 + 80067c4: 4943 ldr r1, [pc, #268] @ (80068d4 ) + 80067c6: 4313 orrs r3, r2 + 80067c8: 60cb str r3, [r1, #12] +#endif + } + } + + if(status == HAL_OK) + 80067ca: 7bfb ldrb r3, [r7, #15] + 80067cc: 2b00 cmp r3, #0 + 80067ce: d17c bne.n 80068ca + { + /* Disable the PLLSAI1 */ + __HAL_RCC_PLLSAI1_DISABLE(); + 80067d0: 4b40 ldr r3, [pc, #256] @ (80068d4 ) + 80067d2: 681b ldr r3, [r3, #0] + 80067d4: 4a3f ldr r2, [pc, #252] @ (80068d4 ) + 80067d6: f023 6380 bic.w r3, r3, #67108864 @ 0x4000000 + 80067da: 6013 str r3, [r2, #0] + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 80067dc: f7fd fc9e bl 800411c + 80067e0: 60b8 str r0, [r7, #8] + + /* Wait till PLLSAI1 is ready to be updated */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != 0U) + 80067e2: e009 b.n 80067f8 + { + if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) + 80067e4: f7fd fc9a bl 800411c + 80067e8: 4602 mov r2, r0 + 80067ea: 68bb ldr r3, [r7, #8] + 80067ec: 1ad3 subs r3, r2, r3 + 80067ee: 2b02 cmp r3, #2 + 80067f0: d902 bls.n 80067f8 + { + status = HAL_TIMEOUT; + 80067f2: 2303 movs r3, #3 + 80067f4: 73fb strb r3, [r7, #15] + break; + 80067f6: e005 b.n 8006804 + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != 0U) + 80067f8: 4b36 ldr r3, [pc, #216] @ (80068d4 ) + 80067fa: 681b ldr r3, [r3, #0] + 80067fc: f003 6300 and.w r3, r3, #134217728 @ 0x8000000 + 8006800: 2b00 cmp r3, #0 + 8006802: d1ef bne.n 80067e4 + } + } + + if(status == HAL_OK) + 8006804: 7bfb ldrb r3, [r7, #15] + 8006806: 2b00 cmp r3, #0 + 8006808: d15f bne.n 80068ca + { + if(Divider == DIVIDER_P_UPDATE) + 800680a: 683b ldr r3, [r7, #0] + 800680c: 2b00 cmp r3, #0 + 800680e: d110 bne.n 8006832 +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#else + /* Configure the PLLSAI1 Division factor P and Multiplication factor N*/ +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + MODIFY_REG(RCC->PLLSAI1CFGR, + 8006810: 4b30 ldr r3, [pc, #192] @ (80068d4 ) + 8006812: 691b ldr r3, [r3, #16] + 8006814: f023 4378 bic.w r3, r3, #4160749568 @ 0xf8000000 + 8006818: f423 43fe bic.w r3, r3, #32512 @ 0x7f00 + 800681c: 687a ldr r2, [r7, #4] + 800681e: 6892 ldr r2, [r2, #8] + 8006820: 0211 lsls r1, r2, #8 + 8006822: 687a ldr r2, [r7, #4] + 8006824: 68d2 ldr r2, [r2, #12] + 8006826: 06d2 lsls r2, r2, #27 + 8006828: 430a orrs r2, r1 + 800682a: 492a ldr r1, [pc, #168] @ (80068d4 ) + 800682c: 4313 orrs r3, r2 + 800682e: 610b str r3, [r1, #16] + 8006830: e027 b.n 8006882 + ((PllSai1->PLLSAI1P >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos)); +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + } + else if(Divider == DIVIDER_Q_UPDATE) + 8006832: 683b ldr r3, [r7, #0] + 8006834: 2b01 cmp r3, #1 + 8006836: d112 bne.n 800685e + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (((PllSai1->PLLSAI1Q >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | + ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); +#else + /* Configure the PLLSAI1 Division factor Q and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI1CFGR, + 8006838: 4b26 ldr r3, [pc, #152] @ (80068d4 ) + 800683a: 691b ldr r3, [r3, #16] + 800683c: f423 03c0 bic.w r3, r3, #6291456 @ 0x600000 + 8006840: f423 43fe bic.w r3, r3, #32512 @ 0x7f00 + 8006844: 687a ldr r2, [r7, #4] + 8006846: 6892 ldr r2, [r2, #8] + 8006848: 0211 lsls r1, r2, #8 + 800684a: 687a ldr r2, [r7, #4] + 800684c: 6912 ldr r2, [r2, #16] + 800684e: 0852 lsrs r2, r2, #1 + 8006850: 3a01 subs r2, #1 + 8006852: 0552 lsls r2, r2, #21 + 8006854: 430a orrs r2, r1 + 8006856: 491f ldr r1, [pc, #124] @ (80068d4 ) + 8006858: 4313 orrs r3, r2 + 800685a: 610b str r3, [r1, #16] + 800685c: e011 b.n 8006882 + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (((PllSai1->PLLSAI1R >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | + ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); +#else + /* Configure the PLLSAI1 Division factor R and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI1CFGR, + 800685e: 4b1d ldr r3, [pc, #116] @ (80068d4 ) + 8006860: 691b ldr r3, [r3, #16] + 8006862: f023 63c0 bic.w r3, r3, #100663296 @ 0x6000000 + 8006866: f423 43fe bic.w r3, r3, #32512 @ 0x7f00 + 800686a: 687a ldr r2, [r7, #4] + 800686c: 6892 ldr r2, [r2, #8] + 800686e: 0211 lsls r1, r2, #8 + 8006870: 687a ldr r2, [r7, #4] + 8006872: 6952 ldr r2, [r2, #20] + 8006874: 0852 lsrs r2, r2, #1 + 8006876: 3a01 subs r2, #1 + 8006878: 0652 lsls r2, r2, #25 + 800687a: 430a orrs r2, r1 + 800687c: 4915 ldr r1, [pc, #84] @ (80068d4 ) + 800687e: 4313 orrs r3, r2 + 8006880: 610b str r3, [r1, #16] + (((PllSai1->PLLSAI1R >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos)); +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + } + + /* Enable the PLLSAI1 again by setting PLLSAI1ON to 1*/ + __HAL_RCC_PLLSAI1_ENABLE(); + 8006882: 4b14 ldr r3, [pc, #80] @ (80068d4 ) + 8006884: 681b ldr r3, [r3, #0] + 8006886: 4a13 ldr r2, [pc, #76] @ (80068d4 ) + 8006888: f043 6380 orr.w r3, r3, #67108864 @ 0x4000000 + 800688c: 6013 str r3, [r2, #0] + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + 800688e: f7fd fc45 bl 800411c + 8006892: 60b8 str r0, [r7, #8] + + /* Wait till PLLSAI1 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == 0U) + 8006894: e009 b.n 80068aa + { + if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) + 8006896: f7fd fc41 bl 800411c + 800689a: 4602 mov r2, r0 + 800689c: 68bb ldr r3, [r7, #8] + 800689e: 1ad3 subs r3, r2, r3 + 80068a0: 2b02 cmp r3, #2 + 80068a2: d902 bls.n 80068aa + { + status = HAL_TIMEOUT; + 80068a4: 2303 movs r3, #3 + 80068a6: 73fb strb r3, [r7, #15] + break; + 80068a8: e005 b.n 80068b6 + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == 0U) + 80068aa: 4b0a ldr r3, [pc, #40] @ (80068d4 ) + 80068ac: 681b ldr r3, [r3, #0] + 80068ae: f003 6300 and.w r3, r3, #134217728 @ 0x8000000 + 80068b2: 2b00 cmp r3, #0 + 80068b4: d0ef beq.n 8006896 + } + } + + if(status == HAL_OK) + 80068b6: 7bfb ldrb r3, [r7, #15] + 80068b8: 2b00 cmp r3, #0 + 80068ba: d106 bne.n 80068ca + { + /* Configure the PLLSAI1 Clock output(s) */ + __HAL_RCC_PLLSAI1CLKOUT_ENABLE(PllSai1->PLLSAI1ClockOut); + 80068bc: 4b05 ldr r3, [pc, #20] @ (80068d4 ) + 80068be: 691a ldr r2, [r3, #16] + 80068c0: 687b ldr r3, [r7, #4] + 80068c2: 699b ldr r3, [r3, #24] + 80068c4: 4903 ldr r1, [pc, #12] @ (80068d4 ) + 80068c6: 4313 orrs r3, r2 + 80068c8: 610b str r3, [r1, #16] + } + } + } + + return status; + 80068ca: 7bfb ldrb r3, [r7, #15] +} + 80068cc: 4618 mov r0, r3 + 80068ce: 3710 adds r7, #16 + 80068d0: 46bd mov sp, r7 + 80068d2: bd80 pop {r7, pc} + 80068d4: 40021000 .word 0x40021000 + +080068d8 : + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + 80068d8: b580 push {r7, lr} + 80068da: b082 sub sp, #8 + 80068dc: af00 add r7, sp, #0 + 80068de: 6078 str r0, [r7, #4] + /* Check the UART handle allocation */ + if (huart == NULL) + 80068e0: 687b ldr r3, [r7, #4] + 80068e2: 2b00 cmp r3, #0 + 80068e4: d101 bne.n 80068ea + { + return HAL_ERROR; + 80068e6: 2301 movs r3, #1 + 80068e8: e040 b.n 800696c + { + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + } + + if (huart->gState == HAL_UART_STATE_RESET) + 80068ea: 687b ldr r3, [r7, #4] + 80068ec: 6fdb ldr r3, [r3, #124] @ 0x7c + 80068ee: 2b00 cmp r3, #0 + 80068f0: d106 bne.n 8006900 + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + 80068f2: 687b ldr r3, [r7, #4] + 80068f4: 2200 movs r2, #0 + 80068f6: f883 2078 strb.w r2, [r3, #120] @ 0x78 + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); + 80068fa: 6878 ldr r0, [r7, #4] + 80068fc: f7fd fa10 bl 8003d20 +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + 8006900: 687b ldr r3, [r7, #4] + 8006902: 2224 movs r2, #36 @ 0x24 + 8006904: 67da str r2, [r3, #124] @ 0x7c + + __HAL_UART_DISABLE(huart); + 8006906: 687b ldr r3, [r7, #4] + 8006908: 681b ldr r3, [r3, #0] + 800690a: 681a ldr r2, [r3, #0] + 800690c: 687b ldr r3, [r7, #4] + 800690e: 681b ldr r3, [r3, #0] + 8006910: f022 0201 bic.w r2, r2, #1 + 8006914: 601a str r2, [r3, #0] + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + 8006916: 687b ldr r3, [r7, #4] + 8006918: 6a5b ldr r3, [r3, #36] @ 0x24 + 800691a: 2b00 cmp r3, #0 + 800691c: d002 beq.n 8006924 + { + UART_AdvFeatureConfig(huart); + 800691e: 6878 ldr r0, [r7, #4] + 8006920: f000 fb38 bl 8006f94 + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + 8006924: 6878 ldr r0, [r7, #4] + 8006926: f000 f8af bl 8006a88 + 800692a: 4603 mov r3, r0 + 800692c: 2b01 cmp r3, #1 + 800692e: d101 bne.n 8006934 + { + return HAL_ERROR; + 8006930: 2301 movs r3, #1 + 8006932: e01b b.n 800696c + } + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + 8006934: 687b ldr r3, [r7, #4] + 8006936: 681b ldr r3, [r3, #0] + 8006938: 685a ldr r2, [r3, #4] + 800693a: 687b ldr r3, [r7, #4] + 800693c: 681b ldr r3, [r3, #0] + 800693e: f422 4290 bic.w r2, r2, #18432 @ 0x4800 + 8006942: 605a str r2, [r3, #4] + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + 8006944: 687b ldr r3, [r7, #4] + 8006946: 681b ldr r3, [r3, #0] + 8006948: 689a ldr r2, [r3, #8] + 800694a: 687b ldr r3, [r7, #4] + 800694c: 681b ldr r3, [r3, #0] + 800694e: f022 022a bic.w r2, r2, #42 @ 0x2a + 8006952: 609a str r2, [r3, #8] + + __HAL_UART_ENABLE(huart); + 8006954: 687b ldr r3, [r7, #4] + 8006956: 681b ldr r3, [r3, #0] + 8006958: 681a ldr r2, [r3, #0] + 800695a: 687b ldr r3, [r7, #4] + 800695c: 681b ldr r3, [r3, #0] + 800695e: f042 0201 orr.w r2, r2, #1 + 8006962: 601a str r2, [r3, #0] + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); + 8006964: 6878 ldr r0, [r7, #4] + 8006966: f000 fbb7 bl 80070d8 + 800696a: 4603 mov r3, r0 +} + 800696c: 4618 mov r0, r3 + 800696e: 3708 adds r7, #8 + 8006970: 46bd mov sp, r7 + 8006972: bd80 pop {r7, pc} + +08006974 : + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + 8006974: b580 push {r7, lr} + 8006976: b08a sub sp, #40 @ 0x28 + 8006978: af02 add r7, sp, #8 + 800697a: 60f8 str r0, [r7, #12] + 800697c: 60b9 str r1, [r7, #8] + 800697e: 603b str r3, [r7, #0] + 8006980: 4613 mov r3, r2 + 8006982: 80fb strh r3, [r7, #6] + const uint8_t *pdata8bits; + const uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + 8006984: 68fb ldr r3, [r7, #12] + 8006986: 6fdb ldr r3, [r3, #124] @ 0x7c + 8006988: 2b20 cmp r3, #32 + 800698a: d177 bne.n 8006a7c + { + if ((pData == NULL) || (Size == 0U)) + 800698c: 68bb ldr r3, [r7, #8] + 800698e: 2b00 cmp r3, #0 + 8006990: d002 beq.n 8006998 + 8006992: 88fb ldrh r3, [r7, #6] + 8006994: 2b00 cmp r3, #0 + 8006996: d101 bne.n 800699c + { + return HAL_ERROR; + 8006998: 2301 movs r3, #1 + 800699a: e070 b.n 8006a7e + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + 800699c: 68fb ldr r3, [r7, #12] + 800699e: 2200 movs r2, #0 + 80069a0: f8c3 2084 str.w r2, [r3, #132] @ 0x84 + huart->gState = HAL_UART_STATE_BUSY_TX; + 80069a4: 68fb ldr r3, [r7, #12] + 80069a6: 2221 movs r2, #33 @ 0x21 + 80069a8: 67da str r2, [r3, #124] @ 0x7c + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + 80069aa: f7fd fbb7 bl 800411c + 80069ae: 6178 str r0, [r7, #20] + + huart->TxXferSize = Size; + 80069b0: 68fb ldr r3, [r7, #12] + 80069b2: 88fa ldrh r2, [r7, #6] + 80069b4: f8a3 2050 strh.w r2, [r3, #80] @ 0x50 + huart->TxXferCount = Size; + 80069b8: 68fb ldr r3, [r7, #12] + 80069ba: 88fa ldrh r2, [r7, #6] + 80069bc: f8a3 2052 strh.w r2, [r3, #82] @ 0x52 + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + 80069c0: 68fb ldr r3, [r7, #12] + 80069c2: 689b ldr r3, [r3, #8] + 80069c4: f5b3 5f80 cmp.w r3, #4096 @ 0x1000 + 80069c8: d108 bne.n 80069dc + 80069ca: 68fb ldr r3, [r7, #12] + 80069cc: 691b ldr r3, [r3, #16] + 80069ce: 2b00 cmp r3, #0 + 80069d0: d104 bne.n 80069dc + { + pdata8bits = NULL; + 80069d2: 2300 movs r3, #0 + 80069d4: 61fb str r3, [r7, #28] + pdata16bits = (const uint16_t *) pData; + 80069d6: 68bb ldr r3, [r7, #8] + 80069d8: 61bb str r3, [r7, #24] + 80069da: e003 b.n 80069e4 + } + else + { + pdata8bits = pData; + 80069dc: 68bb ldr r3, [r7, #8] + 80069de: 61fb str r3, [r7, #28] + pdata16bits = NULL; + 80069e0: 2300 movs r3, #0 + 80069e2: 61bb str r3, [r7, #24] + } + + while (huart->TxXferCount > 0U) + 80069e4: e02f b.n 8006a46 + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + 80069e6: 683b ldr r3, [r7, #0] + 80069e8: 9300 str r3, [sp, #0] + 80069ea: 697b ldr r3, [r7, #20] + 80069ec: 2200 movs r2, #0 + 80069ee: 2180 movs r1, #128 @ 0x80 + 80069f0: 68f8 ldr r0, [r7, #12] + 80069f2: f000 fc19 bl 8007228 + 80069f6: 4603 mov r3, r0 + 80069f8: 2b00 cmp r3, #0 + 80069fa: d004 beq.n 8006a06 + { + + huart->gState = HAL_UART_STATE_READY; + 80069fc: 68fb ldr r3, [r7, #12] + 80069fe: 2220 movs r2, #32 + 8006a00: 67da str r2, [r3, #124] @ 0x7c + + return HAL_TIMEOUT; + 8006a02: 2303 movs r3, #3 + 8006a04: e03b b.n 8006a7e + } + if (pdata8bits == NULL) + 8006a06: 69fb ldr r3, [r7, #28] + 8006a08: 2b00 cmp r3, #0 + 8006a0a: d10b bne.n 8006a24 + { + huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + 8006a0c: 69bb ldr r3, [r7, #24] + 8006a0e: 881a ldrh r2, [r3, #0] + 8006a10: 68fb ldr r3, [r7, #12] + 8006a12: 681b ldr r3, [r3, #0] + 8006a14: f3c2 0208 ubfx r2, r2, #0, #9 + 8006a18: b292 uxth r2, r2 + 8006a1a: 851a strh r2, [r3, #40] @ 0x28 + pdata16bits++; + 8006a1c: 69bb ldr r3, [r7, #24] + 8006a1e: 3302 adds r3, #2 + 8006a20: 61bb str r3, [r7, #24] + 8006a22: e007 b.n 8006a34 + } + else + { + huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + 8006a24: 69fb ldr r3, [r7, #28] + 8006a26: 781a ldrb r2, [r3, #0] + 8006a28: 68fb ldr r3, [r7, #12] + 8006a2a: 681b ldr r3, [r3, #0] + 8006a2c: 851a strh r2, [r3, #40] @ 0x28 + pdata8bits++; + 8006a2e: 69fb ldr r3, [r7, #28] + 8006a30: 3301 adds r3, #1 + 8006a32: 61fb str r3, [r7, #28] + } + huart->TxXferCount--; + 8006a34: 68fb ldr r3, [r7, #12] + 8006a36: f8b3 3052 ldrh.w r3, [r3, #82] @ 0x52 + 8006a3a: b29b uxth r3, r3 + 8006a3c: 3b01 subs r3, #1 + 8006a3e: b29a uxth r2, r3 + 8006a40: 68fb ldr r3, [r7, #12] + 8006a42: f8a3 2052 strh.w r2, [r3, #82] @ 0x52 + while (huart->TxXferCount > 0U) + 8006a46: 68fb ldr r3, [r7, #12] + 8006a48: f8b3 3052 ldrh.w r3, [r3, #82] @ 0x52 + 8006a4c: b29b uxth r3, r3 + 8006a4e: 2b00 cmp r3, #0 + 8006a50: d1c9 bne.n 80069e6 + } + + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + 8006a52: 683b ldr r3, [r7, #0] + 8006a54: 9300 str r3, [sp, #0] + 8006a56: 697b ldr r3, [r7, #20] + 8006a58: 2200 movs r2, #0 + 8006a5a: 2140 movs r1, #64 @ 0x40 + 8006a5c: 68f8 ldr r0, [r7, #12] + 8006a5e: f000 fbe3 bl 8007228 + 8006a62: 4603 mov r3, r0 + 8006a64: 2b00 cmp r3, #0 + 8006a66: d004 beq.n 8006a72 + { + huart->gState = HAL_UART_STATE_READY; + 8006a68: 68fb ldr r3, [r7, #12] + 8006a6a: 2220 movs r2, #32 + 8006a6c: 67da str r2, [r3, #124] @ 0x7c + + return HAL_TIMEOUT; + 8006a6e: 2303 movs r3, #3 + 8006a70: e005 b.n 8006a7e + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + 8006a72: 68fb ldr r3, [r7, #12] + 8006a74: 2220 movs r2, #32 + 8006a76: 67da str r2, [r3, #124] @ 0x7c + + return HAL_OK; + 8006a78: 2300 movs r3, #0 + 8006a7a: e000 b.n 8006a7e + } + else + { + return HAL_BUSY; + 8006a7c: 2302 movs r3, #2 + } +} + 8006a7e: 4618 mov r0, r3 + 8006a80: 3720 adds r7, #32 + 8006a82: 46bd mov sp, r7 + 8006a84: bd80 pop {r7, pc} + ... + +08006a88 : + * @brief Configure the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) +{ + 8006a88: e92d 4fb0 stmdb sp!, {r4, r5, r7, r8, r9, sl, fp, lr} + 8006a8c: b08a sub sp, #40 @ 0x28 + 8006a8e: af00 add r7, sp, #0 + 8006a90: 60f8 str r0, [r7, #12] + uint32_t tmpreg; + uint16_t brrtemp; + UART_ClockSourceTypeDef clocksource; + uint32_t usartdiv; + HAL_StatusTypeDef ret = HAL_OK; + 8006a92: 2300 movs r3, #0 + 8006a94: f887 3022 strb.w r3, [r7, #34] @ 0x22 + * the UART Word Length, Parity, Mode and oversampling: + * set the M bits according to huart->Init.WordLength value + * set PCE and PS bits according to huart->Init.Parity value + * set TE and RE bits according to huart->Init.Mode value + * set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; + 8006a98: 68fb ldr r3, [r7, #12] + 8006a9a: 689a ldr r2, [r3, #8] + 8006a9c: 68fb ldr r3, [r7, #12] + 8006a9e: 691b ldr r3, [r3, #16] + 8006aa0: 431a orrs r2, r3 + 8006aa2: 68fb ldr r3, [r7, #12] + 8006aa4: 695b ldr r3, [r3, #20] + 8006aa6: 431a orrs r2, r3 + 8006aa8: 68fb ldr r3, [r7, #12] + 8006aaa: 69db ldr r3, [r3, #28] + 8006aac: 4313 orrs r3, r2 + 8006aae: 627b str r3, [r7, #36] @ 0x24 + MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + 8006ab0: 68fb ldr r3, [r7, #12] + 8006ab2: 681b ldr r3, [r3, #0] + 8006ab4: 681a ldr r2, [r3, #0] + 8006ab6: 4ba5 ldr r3, [pc, #660] @ (8006d4c ) + 8006ab8: 4013 ands r3, r2 + 8006aba: 68fa ldr r2, [r7, #12] + 8006abc: 6812 ldr r2, [r2, #0] + 8006abe: 6a79 ldr r1, [r7, #36] @ 0x24 + 8006ac0: 430b orrs r3, r1 + 8006ac2: 6013 str r3, [r2, #0] + + /*-------------------------- USART CR2 Configuration -----------------------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits according + * to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + 8006ac4: 68fb ldr r3, [r7, #12] + 8006ac6: 681b ldr r3, [r3, #0] + 8006ac8: 685b ldr r3, [r3, #4] + 8006aca: f423 5140 bic.w r1, r3, #12288 @ 0x3000 + 8006ace: 68fb ldr r3, [r7, #12] + 8006ad0: 68da ldr r2, [r3, #12] + 8006ad2: 68fb ldr r3, [r7, #12] + 8006ad4: 681b ldr r3, [r3, #0] + 8006ad6: 430a orrs r2, r1 + 8006ad8: 605a str r2, [r3, #4] + /* Configure + * - UART HardWare Flow Control: set CTSE and RTSE bits according + * to huart->Init.HwFlowCtl value + * - one-bit sampling method versus three samples' majority rule according + * to huart->Init.OneBitSampling (not applicable to LPUART) */ + tmpreg = (uint32_t)huart->Init.HwFlowCtl; + 8006ada: 68fb ldr r3, [r7, #12] + 8006adc: 699b ldr r3, [r3, #24] + 8006ade: 627b str r3, [r7, #36] @ 0x24 + + if (!(UART_INSTANCE_LOWPOWER(huart))) + 8006ae0: 68fb ldr r3, [r7, #12] + 8006ae2: 681b ldr r3, [r3, #0] + 8006ae4: 4a9a ldr r2, [pc, #616] @ (8006d50 ) + 8006ae6: 4293 cmp r3, r2 + 8006ae8: d004 beq.n 8006af4 + { + tmpreg |= huart->Init.OneBitSampling; + 8006aea: 68fb ldr r3, [r7, #12] + 8006aec: 6a1b ldr r3, [r3, #32] + 8006aee: 6a7a ldr r2, [r7, #36] @ 0x24 + 8006af0: 4313 orrs r3, r2 + 8006af2: 627b str r3, [r7, #36] @ 0x24 + } + MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); + 8006af4: 68fb ldr r3, [r7, #12] + 8006af6: 681b ldr r3, [r3, #0] + 8006af8: 689b ldr r3, [r3, #8] + 8006afa: f423 6130 bic.w r1, r3, #2816 @ 0xb00 + 8006afe: 68fb ldr r3, [r7, #12] + 8006b00: 681b ldr r3, [r3, #0] + 8006b02: 6a7a ldr r2, [r7, #36] @ 0x24 + 8006b04: 430a orrs r2, r1 + 8006b06: 609a str r2, [r3, #8] + * - UART Clock Prescaler : set PRESCALER according to huart->Init.ClockPrescaler value */ + MODIFY_REG(huart->Instance->PRESC, USART_PRESC_PRESCALER, huart->Init.ClockPrescaler); +#endif /* USART_PRESC_PRESCALER */ + + /*-------------------------- USART BRR Configuration -----------------------*/ + UART_GETCLOCKSOURCE(huart, clocksource); + 8006b08: 68fb ldr r3, [r7, #12] + 8006b0a: 681b ldr r3, [r3, #0] + 8006b0c: 4a91 ldr r2, [pc, #580] @ (8006d54 ) + 8006b0e: 4293 cmp r3, r2 + 8006b10: d126 bne.n 8006b60 + 8006b12: 4b91 ldr r3, [pc, #580] @ (8006d58 ) + 8006b14: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 8006b18: f003 0303 and.w r3, r3, #3 + 8006b1c: 2b03 cmp r3, #3 + 8006b1e: d81b bhi.n 8006b58 + 8006b20: a201 add r2, pc, #4 @ (adr r2, 8006b28 ) + 8006b22: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 8006b26: bf00 nop + 8006b28: 08006b39 .word 0x08006b39 + 8006b2c: 08006b49 .word 0x08006b49 + 8006b30: 08006b41 .word 0x08006b41 + 8006b34: 08006b51 .word 0x08006b51 + 8006b38: 2301 movs r3, #1 + 8006b3a: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006b3e: e0d6 b.n 8006cee + 8006b40: 2302 movs r3, #2 + 8006b42: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006b46: e0d2 b.n 8006cee + 8006b48: 2304 movs r3, #4 + 8006b4a: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006b4e: e0ce b.n 8006cee + 8006b50: 2308 movs r3, #8 + 8006b52: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006b56: e0ca b.n 8006cee + 8006b58: 2310 movs r3, #16 + 8006b5a: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006b5e: e0c6 b.n 8006cee + 8006b60: 68fb ldr r3, [r7, #12] + 8006b62: 681b ldr r3, [r3, #0] + 8006b64: 4a7d ldr r2, [pc, #500] @ (8006d5c ) + 8006b66: 4293 cmp r3, r2 + 8006b68: d138 bne.n 8006bdc + 8006b6a: 4b7b ldr r3, [pc, #492] @ (8006d58 ) + 8006b6c: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 8006b70: f003 030c and.w r3, r3, #12 + 8006b74: 2b0c cmp r3, #12 + 8006b76: d82d bhi.n 8006bd4 + 8006b78: a201 add r2, pc, #4 @ (adr r2, 8006b80 ) + 8006b7a: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 8006b7e: bf00 nop + 8006b80: 08006bb5 .word 0x08006bb5 + 8006b84: 08006bd5 .word 0x08006bd5 + 8006b88: 08006bd5 .word 0x08006bd5 + 8006b8c: 08006bd5 .word 0x08006bd5 + 8006b90: 08006bc5 .word 0x08006bc5 + 8006b94: 08006bd5 .word 0x08006bd5 + 8006b98: 08006bd5 .word 0x08006bd5 + 8006b9c: 08006bd5 .word 0x08006bd5 + 8006ba0: 08006bbd .word 0x08006bbd + 8006ba4: 08006bd5 .word 0x08006bd5 + 8006ba8: 08006bd5 .word 0x08006bd5 + 8006bac: 08006bd5 .word 0x08006bd5 + 8006bb0: 08006bcd .word 0x08006bcd + 8006bb4: 2300 movs r3, #0 + 8006bb6: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006bba: e098 b.n 8006cee + 8006bbc: 2302 movs r3, #2 + 8006bbe: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006bc2: e094 b.n 8006cee + 8006bc4: 2304 movs r3, #4 + 8006bc6: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006bca: e090 b.n 8006cee + 8006bcc: 2308 movs r3, #8 + 8006bce: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006bd2: e08c b.n 8006cee + 8006bd4: 2310 movs r3, #16 + 8006bd6: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006bda: e088 b.n 8006cee + 8006bdc: 68fb ldr r3, [r7, #12] + 8006bde: 681b ldr r3, [r3, #0] + 8006be0: 4a5f ldr r2, [pc, #380] @ (8006d60 ) + 8006be2: 4293 cmp r3, r2 + 8006be4: d125 bne.n 8006c32 + 8006be6: 4b5c ldr r3, [pc, #368] @ (8006d58 ) + 8006be8: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 8006bec: f003 0330 and.w r3, r3, #48 @ 0x30 + 8006bf0: 2b30 cmp r3, #48 @ 0x30 + 8006bf2: d016 beq.n 8006c22 + 8006bf4: 2b30 cmp r3, #48 @ 0x30 + 8006bf6: d818 bhi.n 8006c2a + 8006bf8: 2b20 cmp r3, #32 + 8006bfa: d00a beq.n 8006c12 + 8006bfc: 2b20 cmp r3, #32 + 8006bfe: d814 bhi.n 8006c2a + 8006c00: 2b00 cmp r3, #0 + 8006c02: d002 beq.n 8006c0a + 8006c04: 2b10 cmp r3, #16 + 8006c06: d008 beq.n 8006c1a + 8006c08: e00f b.n 8006c2a + 8006c0a: 2300 movs r3, #0 + 8006c0c: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006c10: e06d b.n 8006cee + 8006c12: 2302 movs r3, #2 + 8006c14: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006c18: e069 b.n 8006cee + 8006c1a: 2304 movs r3, #4 + 8006c1c: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006c20: e065 b.n 8006cee + 8006c22: 2308 movs r3, #8 + 8006c24: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006c28: e061 b.n 8006cee + 8006c2a: 2310 movs r3, #16 + 8006c2c: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006c30: e05d b.n 8006cee + 8006c32: 68fb ldr r3, [r7, #12] + 8006c34: 681b ldr r3, [r3, #0] + 8006c36: 4a4b ldr r2, [pc, #300] @ (8006d64 ) + 8006c38: 4293 cmp r3, r2 + 8006c3a: d125 bne.n 8006c88 + 8006c3c: 4b46 ldr r3, [pc, #280] @ (8006d58 ) + 8006c3e: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 8006c42: f003 03c0 and.w r3, r3, #192 @ 0xc0 + 8006c46: 2bc0 cmp r3, #192 @ 0xc0 + 8006c48: d016 beq.n 8006c78 + 8006c4a: 2bc0 cmp r3, #192 @ 0xc0 + 8006c4c: d818 bhi.n 8006c80 + 8006c4e: 2b80 cmp r3, #128 @ 0x80 + 8006c50: d00a beq.n 8006c68 + 8006c52: 2b80 cmp r3, #128 @ 0x80 + 8006c54: d814 bhi.n 8006c80 + 8006c56: 2b00 cmp r3, #0 + 8006c58: d002 beq.n 8006c60 + 8006c5a: 2b40 cmp r3, #64 @ 0x40 + 8006c5c: d008 beq.n 8006c70 + 8006c5e: e00f b.n 8006c80 + 8006c60: 2300 movs r3, #0 + 8006c62: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006c66: e042 b.n 8006cee + 8006c68: 2302 movs r3, #2 + 8006c6a: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006c6e: e03e b.n 8006cee + 8006c70: 2304 movs r3, #4 + 8006c72: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006c76: e03a b.n 8006cee + 8006c78: 2308 movs r3, #8 + 8006c7a: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006c7e: e036 b.n 8006cee + 8006c80: 2310 movs r3, #16 + 8006c82: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006c86: e032 b.n 8006cee + 8006c88: 68fb ldr r3, [r7, #12] + 8006c8a: 681b ldr r3, [r3, #0] + 8006c8c: 4a30 ldr r2, [pc, #192] @ (8006d50 ) + 8006c8e: 4293 cmp r3, r2 + 8006c90: d12a bne.n 8006ce8 + 8006c92: 4b31 ldr r3, [pc, #196] @ (8006d58 ) + 8006c94: f8d3 3088 ldr.w r3, [r3, #136] @ 0x88 + 8006c98: f403 6340 and.w r3, r3, #3072 @ 0xc00 + 8006c9c: f5b3 6f40 cmp.w r3, #3072 @ 0xc00 + 8006ca0: d01a beq.n 8006cd8 + 8006ca2: f5b3 6f40 cmp.w r3, #3072 @ 0xc00 + 8006ca6: d81b bhi.n 8006ce0 + 8006ca8: f5b3 6f00 cmp.w r3, #2048 @ 0x800 + 8006cac: d00c beq.n 8006cc8 + 8006cae: f5b3 6f00 cmp.w r3, #2048 @ 0x800 + 8006cb2: d815 bhi.n 8006ce0 + 8006cb4: 2b00 cmp r3, #0 + 8006cb6: d003 beq.n 8006cc0 + 8006cb8: f5b3 6f80 cmp.w r3, #1024 @ 0x400 + 8006cbc: d008 beq.n 8006cd0 + 8006cbe: e00f b.n 8006ce0 + 8006cc0: 2300 movs r3, #0 + 8006cc2: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006cc6: e012 b.n 8006cee + 8006cc8: 2302 movs r3, #2 + 8006cca: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006cce: e00e b.n 8006cee + 8006cd0: 2304 movs r3, #4 + 8006cd2: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006cd6: e00a b.n 8006cee + 8006cd8: 2308 movs r3, #8 + 8006cda: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006cde: e006 b.n 8006cee + 8006ce0: 2310 movs r3, #16 + 8006ce2: f887 3023 strb.w r3, [r7, #35] @ 0x23 + 8006ce6: e002 b.n 8006cee + 8006ce8: 2310 movs r3, #16 + 8006cea: f887 3023 strb.w r3, [r7, #35] @ 0x23 + + /* Check LPUART instance */ + if (UART_INSTANCE_LOWPOWER(huart)) + 8006cee: 68fb ldr r3, [r7, #12] + 8006cf0: 681b ldr r3, [r3, #0] + 8006cf2: 4a17 ldr r2, [pc, #92] @ (8006d50 ) + 8006cf4: 4293 cmp r3, r2 + 8006cf6: f040 808b bne.w 8006e10 + { + /* Retrieve frequency clock */ + switch (clocksource) + 8006cfa: f897 3023 ldrb.w r3, [r7, #35] @ 0x23 + 8006cfe: 2b08 cmp r3, #8 + 8006d00: d834 bhi.n 8006d6c + 8006d02: a201 add r2, pc, #4 @ (adr r2, 8006d08 ) + 8006d04: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 8006d08: 08006d2d .word 0x08006d2d + 8006d0c: 08006d6d .word 0x08006d6d + 8006d10: 08006d35 .word 0x08006d35 + 8006d14: 08006d6d .word 0x08006d6d + 8006d18: 08006d3b .word 0x08006d3b + 8006d1c: 08006d6d .word 0x08006d6d + 8006d20: 08006d6d .word 0x08006d6d + 8006d24: 08006d6d .word 0x08006d6d + 8006d28: 08006d43 .word 0x08006d43 + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + 8006d2c: f7ff f9ea bl 8006104 + 8006d30: 61f8 str r0, [r7, #28] + break; + 8006d32: e021 b.n 8006d78 + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + 8006d34: 4b0c ldr r3, [pc, #48] @ (8006d68 ) + 8006d36: 61fb str r3, [r7, #28] + break; + 8006d38: e01e b.n 8006d78 + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + 8006d3a: f7ff f94b bl 8005fd4 + 8006d3e: 61f8 str r0, [r7, #28] + break; + 8006d40: e01a b.n 8006d78 + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + 8006d42: f44f 4300 mov.w r3, #32768 @ 0x8000 + 8006d46: 61fb str r3, [r7, #28] + break; + 8006d48: e016 b.n 8006d78 + 8006d4a: bf00 nop + 8006d4c: efff69f3 .word 0xefff69f3 + 8006d50: 40008000 .word 0x40008000 + 8006d54: 40013800 .word 0x40013800 + 8006d58: 40021000 .word 0x40021000 + 8006d5c: 40004400 .word 0x40004400 + 8006d60: 40004800 .word 0x40004800 + 8006d64: 40004c00 .word 0x40004c00 + 8006d68: 00f42400 .word 0x00f42400 + default: + pclk = 0U; + 8006d6c: 2300 movs r3, #0 + 8006d6e: 61fb str r3, [r7, #28] + ret = HAL_ERROR; + 8006d70: 2301 movs r3, #1 + 8006d72: f887 3022 strb.w r3, [r7, #34] @ 0x22 + break; + 8006d76: bf00 nop + } + + /* If proper clock source reported */ + if (pclk != 0U) + 8006d78: 69fb ldr r3, [r7, #28] + 8006d7a: 2b00 cmp r3, #0 + 8006d7c: f000 80fa beq.w 8006f74 + } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) || + (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */ +#else + /* No Prescaler applicable */ + /* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */ + if ((pclk < (3U * huart->Init.BaudRate)) || + 8006d80: 68fb ldr r3, [r7, #12] + 8006d82: 685a ldr r2, [r3, #4] + 8006d84: 4613 mov r3, r2 + 8006d86: 005b lsls r3, r3, #1 + 8006d88: 4413 add r3, r2 + 8006d8a: 69fa ldr r2, [r7, #28] + 8006d8c: 429a cmp r2, r3 + 8006d8e: d305 bcc.n 8006d9c + (pclk > (4096U * huart->Init.BaudRate))) + 8006d90: 68fb ldr r3, [r7, #12] + 8006d92: 685b ldr r3, [r3, #4] + 8006d94: 031b lsls r3, r3, #12 + if ((pclk < (3U * huart->Init.BaudRate)) || + 8006d96: 69fa ldr r2, [r7, #28] + 8006d98: 429a cmp r2, r3 + 8006d9a: d903 bls.n 8006da4 + { + ret = HAL_ERROR; + 8006d9c: 2301 movs r3, #1 + 8006d9e: f887 3022 strb.w r3, [r7, #34] @ 0x22 + 8006da2: e0e7 b.n 8006f74 + } + else + { + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate)); + 8006da4: 69fb ldr r3, [r7, #28] + 8006da6: 2200 movs r2, #0 + 8006da8: 461c mov r4, r3 + 8006daa: 4615 mov r5, r2 + 8006dac: f04f 0200 mov.w r2, #0 + 8006db0: f04f 0300 mov.w r3, #0 + 8006db4: 022b lsls r3, r5, #8 + 8006db6: ea43 6314 orr.w r3, r3, r4, lsr #24 + 8006dba: 0222 lsls r2, r4, #8 + 8006dbc: 68f9 ldr r1, [r7, #12] + 8006dbe: 6849 ldr r1, [r1, #4] + 8006dc0: 0849 lsrs r1, r1, #1 + 8006dc2: 2000 movs r0, #0 + 8006dc4: 4688 mov r8, r1 + 8006dc6: 4681 mov r9, r0 + 8006dc8: eb12 0a08 adds.w sl, r2, r8 + 8006dcc: eb43 0b09 adc.w fp, r3, r9 + 8006dd0: 68fb ldr r3, [r7, #12] + 8006dd2: 685b ldr r3, [r3, #4] + 8006dd4: 2200 movs r2, #0 + 8006dd6: 603b str r3, [r7, #0] + 8006dd8: 607a str r2, [r7, #4] + 8006dda: e9d7 2300 ldrd r2, r3, [r7] + 8006dde: 4650 mov r0, sl + 8006de0: 4659 mov r1, fp + 8006de2: f7f9 fee9 bl 8000bb8 <__aeabi_uldivmod> + 8006de6: 4602 mov r2, r0 + 8006de8: 460b mov r3, r1 + 8006dea: 4613 mov r3, r2 + 8006dec: 61bb str r3, [r7, #24] + if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) + 8006dee: 69bb ldr r3, [r7, #24] + 8006df0: f5b3 7f40 cmp.w r3, #768 @ 0x300 + 8006df4: d308 bcc.n 8006e08 + 8006df6: 69bb ldr r3, [r7, #24] + 8006df8: f5b3 1f80 cmp.w r3, #1048576 @ 0x100000 + 8006dfc: d204 bcs.n 8006e08 + { + huart->Instance->BRR = usartdiv; + 8006dfe: 68fb ldr r3, [r7, #12] + 8006e00: 681b ldr r3, [r3, #0] + 8006e02: 69ba ldr r2, [r7, #24] + 8006e04: 60da str r2, [r3, #12] + 8006e06: e0b5 b.n 8006f74 + } + else + { + ret = HAL_ERROR; + 8006e08: 2301 movs r3, #1 + 8006e0a: f887 3022 strb.w r3, [r7, #34] @ 0x22 + 8006e0e: e0b1 b.n 8006f74 + } /* if ( (pclk < (3 * huart->Init.BaudRate) ) || (pclk > (4096 * huart->Init.BaudRate) )) */ +#endif /* USART_PRESC_PRESCALER */ + } /* if (pclk != 0) */ + } + /* Check UART Over Sampling to set Baud Rate Register */ + else if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + 8006e10: 68fb ldr r3, [r7, #12] + 8006e12: 69db ldr r3, [r3, #28] + 8006e14: f5b3 4f00 cmp.w r3, #32768 @ 0x8000 + 8006e18: d15d bne.n 8006ed6 + { + switch (clocksource) + 8006e1a: f897 3023 ldrb.w r3, [r7, #35] @ 0x23 + 8006e1e: 2b08 cmp r3, #8 + 8006e20: d827 bhi.n 8006e72 + 8006e22: a201 add r2, pc, #4 @ (adr r2, 8006e28 ) + 8006e24: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 8006e28: 08006e4d .word 0x08006e4d + 8006e2c: 08006e55 .word 0x08006e55 + 8006e30: 08006e5d .word 0x08006e5d + 8006e34: 08006e73 .word 0x08006e73 + 8006e38: 08006e63 .word 0x08006e63 + 8006e3c: 08006e73 .word 0x08006e73 + 8006e40: 08006e73 .word 0x08006e73 + 8006e44: 08006e73 .word 0x08006e73 + 8006e48: 08006e6b .word 0x08006e6b + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + 8006e4c: f7ff f95a bl 8006104 + 8006e50: 61f8 str r0, [r7, #28] + break; + 8006e52: e014 b.n 8006e7e + case UART_CLOCKSOURCE_PCLK2: + pclk = HAL_RCC_GetPCLK2Freq(); + 8006e54: f7ff f96c bl 8006130 + 8006e58: 61f8 str r0, [r7, #28] + break; + 8006e5a: e010 b.n 8006e7e + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + 8006e5c: 4b4c ldr r3, [pc, #304] @ (8006f90 ) + 8006e5e: 61fb str r3, [r7, #28] + break; + 8006e60: e00d b.n 8006e7e + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + 8006e62: f7ff f8b7 bl 8005fd4 + 8006e66: 61f8 str r0, [r7, #28] + break; + 8006e68: e009 b.n 8006e7e + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + 8006e6a: f44f 4300 mov.w r3, #32768 @ 0x8000 + 8006e6e: 61fb str r3, [r7, #28] + break; + 8006e70: e005 b.n 8006e7e + default: + pclk = 0U; + 8006e72: 2300 movs r3, #0 + 8006e74: 61fb str r3, [r7, #28] + ret = HAL_ERROR; + 8006e76: 2301 movs r3, #1 + 8006e78: f887 3022 strb.w r3, [r7, #34] @ 0x22 + break; + 8006e7c: bf00 nop + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if (pclk != 0U) + 8006e7e: 69fb ldr r3, [r7, #28] + 8006e80: 2b00 cmp r3, #0 + 8006e82: d077 beq.n 8006f74 + { +#if defined(USART_PRESC_PRESCALER) + usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); +#else + usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate)); + 8006e84: 69fb ldr r3, [r7, #28] + 8006e86: 005a lsls r2, r3, #1 + 8006e88: 68fb ldr r3, [r7, #12] + 8006e8a: 685b ldr r3, [r3, #4] + 8006e8c: 085b lsrs r3, r3, #1 + 8006e8e: 441a add r2, r3 + 8006e90: 68fb ldr r3, [r7, #12] + 8006e92: 685b ldr r3, [r3, #4] + 8006e94: fbb2 f3f3 udiv r3, r2, r3 + 8006e98: 61bb str r3, [r7, #24] +#endif /* USART_PRESC_PRESCALER */ + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + 8006e9a: 69bb ldr r3, [r7, #24] + 8006e9c: 2b0f cmp r3, #15 + 8006e9e: d916 bls.n 8006ece + 8006ea0: 69bb ldr r3, [r7, #24] + 8006ea2: f5b3 3f80 cmp.w r3, #65536 @ 0x10000 + 8006ea6: d212 bcs.n 8006ece + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + 8006ea8: 69bb ldr r3, [r7, #24] + 8006eaa: b29b uxth r3, r3 + 8006eac: f023 030f bic.w r3, r3, #15 + 8006eb0: 82fb strh r3, [r7, #22] + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + 8006eb2: 69bb ldr r3, [r7, #24] + 8006eb4: 085b lsrs r3, r3, #1 + 8006eb6: b29b uxth r3, r3 + 8006eb8: f003 0307 and.w r3, r3, #7 + 8006ebc: b29a uxth r2, r3 + 8006ebe: 8afb ldrh r3, [r7, #22] + 8006ec0: 4313 orrs r3, r2 + 8006ec2: 82fb strh r3, [r7, #22] + huart->Instance->BRR = brrtemp; + 8006ec4: 68fb ldr r3, [r7, #12] + 8006ec6: 681b ldr r3, [r3, #0] + 8006ec8: 8afa ldrh r2, [r7, #22] + 8006eca: 60da str r2, [r3, #12] + 8006ecc: e052 b.n 8006f74 + } + else + { + ret = HAL_ERROR; + 8006ece: 2301 movs r3, #1 + 8006ed0: f887 3022 strb.w r3, [r7, #34] @ 0x22 + 8006ed4: e04e b.n 8006f74 + } + } + } + else + { + switch (clocksource) + 8006ed6: f897 3023 ldrb.w r3, [r7, #35] @ 0x23 + 8006eda: 2b08 cmp r3, #8 + 8006edc: d827 bhi.n 8006f2e + 8006ede: a201 add r2, pc, #4 @ (adr r2, 8006ee4 ) + 8006ee0: f852 f023 ldr.w pc, [r2, r3, lsl #2] + 8006ee4: 08006f09 .word 0x08006f09 + 8006ee8: 08006f11 .word 0x08006f11 + 8006eec: 08006f19 .word 0x08006f19 + 8006ef0: 08006f2f .word 0x08006f2f + 8006ef4: 08006f1f .word 0x08006f1f + 8006ef8: 08006f2f .word 0x08006f2f + 8006efc: 08006f2f .word 0x08006f2f + 8006f00: 08006f2f .word 0x08006f2f + 8006f04: 08006f27 .word 0x08006f27 + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + 8006f08: f7ff f8fc bl 8006104 + 8006f0c: 61f8 str r0, [r7, #28] + break; + 8006f0e: e014 b.n 8006f3a + case UART_CLOCKSOURCE_PCLK2: + pclk = HAL_RCC_GetPCLK2Freq(); + 8006f10: f7ff f90e bl 8006130 + 8006f14: 61f8 str r0, [r7, #28] + break; + 8006f16: e010 b.n 8006f3a + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + 8006f18: 4b1d ldr r3, [pc, #116] @ (8006f90 ) + 8006f1a: 61fb str r3, [r7, #28] + break; + 8006f1c: e00d b.n 8006f3a + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + 8006f1e: f7ff f859 bl 8005fd4 + 8006f22: 61f8 str r0, [r7, #28] + break; + 8006f24: e009 b.n 8006f3a + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + 8006f26: f44f 4300 mov.w r3, #32768 @ 0x8000 + 8006f2a: 61fb str r3, [r7, #28] + break; + 8006f2c: e005 b.n 8006f3a + default: + pclk = 0U; + 8006f2e: 2300 movs r3, #0 + 8006f30: 61fb str r3, [r7, #28] + ret = HAL_ERROR; + 8006f32: 2301 movs r3, #1 + 8006f34: f887 3022 strb.w r3, [r7, #34] @ 0x22 + break; + 8006f38: bf00 nop + } + + if (pclk != 0U) + 8006f3a: 69fb ldr r3, [r7, #28] + 8006f3c: 2b00 cmp r3, #0 + 8006f3e: d019 beq.n 8006f74 + { + /* USARTDIV must be greater than or equal to 0d16 */ +#if defined(USART_PRESC_PRESCALER) + usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); +#else + usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate)); + 8006f40: 68fb ldr r3, [r7, #12] + 8006f42: 685b ldr r3, [r3, #4] + 8006f44: 085a lsrs r2, r3, #1 + 8006f46: 69fb ldr r3, [r7, #28] + 8006f48: 441a add r2, r3 + 8006f4a: 68fb ldr r3, [r7, #12] + 8006f4c: 685b ldr r3, [r3, #4] + 8006f4e: fbb2 f3f3 udiv r3, r2, r3 + 8006f52: 61bb str r3, [r7, #24] +#endif /* USART_PRESC_PRESCALER */ + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + 8006f54: 69bb ldr r3, [r7, #24] + 8006f56: 2b0f cmp r3, #15 + 8006f58: d909 bls.n 8006f6e + 8006f5a: 69bb ldr r3, [r7, #24] + 8006f5c: f5b3 3f80 cmp.w r3, #65536 @ 0x10000 + 8006f60: d205 bcs.n 8006f6e + { + huart->Instance->BRR = (uint16_t)usartdiv; + 8006f62: 69bb ldr r3, [r7, #24] + 8006f64: b29a uxth r2, r3 + 8006f66: 68fb ldr r3, [r7, #12] + 8006f68: 681b ldr r3, [r3, #0] + 8006f6a: 60da str r2, [r3, #12] + 8006f6c: e002 b.n 8006f74 + } + else + { + ret = HAL_ERROR; + 8006f6e: 2301 movs r3, #1 + 8006f70: f887 3022 strb.w r3, [r7, #34] @ 0x22 + huart->NbTxDataToProcess = 1; + huart->NbRxDataToProcess = 1; +#endif /* USART_CR1_FIFOEN */ + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + 8006f74: 68fb ldr r3, [r7, #12] + 8006f76: 2200 movs r2, #0 + 8006f78: 669a str r2, [r3, #104] @ 0x68 + huart->TxISR = NULL; + 8006f7a: 68fb ldr r3, [r7, #12] + 8006f7c: 2200 movs r2, #0 + 8006f7e: 66da str r2, [r3, #108] @ 0x6c + + return ret; + 8006f80: f897 3022 ldrb.w r3, [r7, #34] @ 0x22 +} + 8006f84: 4618 mov r0, r3 + 8006f86: 3728 adds r7, #40 @ 0x28 + 8006f88: 46bd mov sp, r7 + 8006f8a: e8bd 8fb0 ldmia.w sp!, {r4, r5, r7, r8, r9, sl, fp, pc} + 8006f8e: bf00 nop + 8006f90: 00f42400 .word 0x00f42400 + +08006f94 : + * @brief Configure the UART peripheral advanced features. + * @param huart UART handle. + * @retval None + */ +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) +{ + 8006f94: b480 push {r7} + 8006f96: b083 sub sp, #12 + 8006f98: af00 add r7, sp, #0 + 8006f9a: 6078 str r0, [r7, #4] + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) + 8006f9c: 687b ldr r3, [r7, #4] + 8006f9e: 6a5b ldr r3, [r3, #36] @ 0x24 + 8006fa0: f003 0308 and.w r3, r3, #8 + 8006fa4: 2b00 cmp r3, #0 + 8006fa6: d00a beq.n 8006fbe + { + assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); + 8006fa8: 687b ldr r3, [r7, #4] + 8006faa: 681b ldr r3, [r3, #0] + 8006fac: 685b ldr r3, [r3, #4] + 8006fae: f423 4100 bic.w r1, r3, #32768 @ 0x8000 + 8006fb2: 687b ldr r3, [r7, #4] + 8006fb4: 6b5a ldr r2, [r3, #52] @ 0x34 + 8006fb6: 687b ldr r3, [r7, #4] + 8006fb8: 681b ldr r3, [r3, #0] + 8006fba: 430a orrs r2, r1 + 8006fbc: 605a str r2, [r3, #4] + } + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) + 8006fbe: 687b ldr r3, [r7, #4] + 8006fc0: 6a5b ldr r3, [r3, #36] @ 0x24 + 8006fc2: f003 0301 and.w r3, r3, #1 + 8006fc6: 2b00 cmp r3, #0 + 8006fc8: d00a beq.n 8006fe0 + { + assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); + 8006fca: 687b ldr r3, [r7, #4] + 8006fcc: 681b ldr r3, [r3, #0] + 8006fce: 685b ldr r3, [r3, #4] + 8006fd0: f423 3100 bic.w r1, r3, #131072 @ 0x20000 + 8006fd4: 687b ldr r3, [r7, #4] + 8006fd6: 6a9a ldr r2, [r3, #40] @ 0x28 + 8006fd8: 687b ldr r3, [r7, #4] + 8006fda: 681b ldr r3, [r3, #0] + 8006fdc: 430a orrs r2, r1 + 8006fde: 605a str r2, [r3, #4] + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) + 8006fe0: 687b ldr r3, [r7, #4] + 8006fe2: 6a5b ldr r3, [r3, #36] @ 0x24 + 8006fe4: f003 0302 and.w r3, r3, #2 + 8006fe8: 2b00 cmp r3, #0 + 8006fea: d00a beq.n 8007002 + { + assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); + 8006fec: 687b ldr r3, [r7, #4] + 8006fee: 681b ldr r3, [r3, #0] + 8006ff0: 685b ldr r3, [r3, #4] + 8006ff2: f423 3180 bic.w r1, r3, #65536 @ 0x10000 + 8006ff6: 687b ldr r3, [r7, #4] + 8006ff8: 6ada ldr r2, [r3, #44] @ 0x2c + 8006ffa: 687b ldr r3, [r7, #4] + 8006ffc: 681b ldr r3, [r3, #0] + 8006ffe: 430a orrs r2, r1 + 8007000: 605a str r2, [r3, #4] + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) + 8007002: 687b ldr r3, [r7, #4] + 8007004: 6a5b ldr r3, [r3, #36] @ 0x24 + 8007006: f003 0304 and.w r3, r3, #4 + 800700a: 2b00 cmp r3, #0 + 800700c: d00a beq.n 8007024 + { + assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); + 800700e: 687b ldr r3, [r7, #4] + 8007010: 681b ldr r3, [r3, #0] + 8007012: 685b ldr r3, [r3, #4] + 8007014: f423 2180 bic.w r1, r3, #262144 @ 0x40000 + 8007018: 687b ldr r3, [r7, #4] + 800701a: 6b1a ldr r2, [r3, #48] @ 0x30 + 800701c: 687b ldr r3, [r7, #4] + 800701e: 681b ldr r3, [r3, #0] + 8007020: 430a orrs r2, r1 + 8007022: 605a str r2, [r3, #4] + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + 8007024: 687b ldr r3, [r7, #4] + 8007026: 6a5b ldr r3, [r3, #36] @ 0x24 + 8007028: f003 0310 and.w r3, r3, #16 + 800702c: 2b00 cmp r3, #0 + 800702e: d00a beq.n 8007046 + { + assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); + 8007030: 687b ldr r3, [r7, #4] + 8007032: 681b ldr r3, [r3, #0] + 8007034: 689b ldr r3, [r3, #8] + 8007036: f423 5180 bic.w r1, r3, #4096 @ 0x1000 + 800703a: 687b ldr r3, [r7, #4] + 800703c: 6b9a ldr r2, [r3, #56] @ 0x38 + 800703e: 687b ldr r3, [r7, #4] + 8007040: 681b ldr r3, [r3, #0] + 8007042: 430a orrs r2, r1 + 8007044: 609a str r2, [r3, #8] + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) + 8007046: 687b ldr r3, [r7, #4] + 8007048: 6a5b ldr r3, [r3, #36] @ 0x24 + 800704a: f003 0320 and.w r3, r3, #32 + 800704e: 2b00 cmp r3, #0 + 8007050: d00a beq.n 8007068 + { + assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); + 8007052: 687b ldr r3, [r7, #4] + 8007054: 681b ldr r3, [r3, #0] + 8007056: 689b ldr r3, [r3, #8] + 8007058: f423 5100 bic.w r1, r3, #8192 @ 0x2000 + 800705c: 687b ldr r3, [r7, #4] + 800705e: 6bda ldr r2, [r3, #60] @ 0x3c + 8007060: 687b ldr r3, [r7, #4] + 8007062: 681b ldr r3, [r3, #0] + 8007064: 430a orrs r2, r1 + 8007066: 609a str r2, [r3, #8] + } + + /* if required, configure auto Baud rate detection scheme */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) + 8007068: 687b ldr r3, [r7, #4] + 800706a: 6a5b ldr r3, [r3, #36] @ 0x24 + 800706c: f003 0340 and.w r3, r3, #64 @ 0x40 + 8007070: 2b00 cmp r3, #0 + 8007072: d01a beq.n 80070aa + { + assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); + 8007074: 687b ldr r3, [r7, #4] + 8007076: 681b ldr r3, [r3, #0] + 8007078: 685b ldr r3, [r3, #4] + 800707a: f423 1180 bic.w r1, r3, #1048576 @ 0x100000 + 800707e: 687b ldr r3, [r7, #4] + 8007080: 6c1a ldr r2, [r3, #64] @ 0x40 + 8007082: 687b ldr r3, [r7, #4] + 8007084: 681b ldr r3, [r3, #0] + 8007086: 430a orrs r2, r1 + 8007088: 605a str r2, [r3, #4] + /* set auto Baudrate detection parameters if detection is enabled */ + if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) + 800708a: 687b ldr r3, [r7, #4] + 800708c: 6c1b ldr r3, [r3, #64] @ 0x40 + 800708e: f5b3 1f80 cmp.w r3, #1048576 @ 0x100000 + 8007092: d10a bne.n 80070aa + { + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); + 8007094: 687b ldr r3, [r7, #4] + 8007096: 681b ldr r3, [r3, #0] + 8007098: 685b ldr r3, [r3, #4] + 800709a: f423 01c0 bic.w r1, r3, #6291456 @ 0x600000 + 800709e: 687b ldr r3, [r7, #4] + 80070a0: 6c5a ldr r2, [r3, #68] @ 0x44 + 80070a2: 687b ldr r3, [r7, #4] + 80070a4: 681b ldr r3, [r3, #0] + 80070a6: 430a orrs r2, r1 + 80070a8: 605a str r2, [r3, #4] + } + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) + 80070aa: 687b ldr r3, [r7, #4] + 80070ac: 6a5b ldr r3, [r3, #36] @ 0x24 + 80070ae: f003 0380 and.w r3, r3, #128 @ 0x80 + 80070b2: 2b00 cmp r3, #0 + 80070b4: d00a beq.n 80070cc + { + assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); + 80070b6: 687b ldr r3, [r7, #4] + 80070b8: 681b ldr r3, [r3, #0] + 80070ba: 685b ldr r3, [r3, #4] + 80070bc: f423 2100 bic.w r1, r3, #524288 @ 0x80000 + 80070c0: 687b ldr r3, [r7, #4] + 80070c2: 6c9a ldr r2, [r3, #72] @ 0x48 + 80070c4: 687b ldr r3, [r7, #4] + 80070c6: 681b ldr r3, [r3, #0] + 80070c8: 430a orrs r2, r1 + 80070ca: 605a str r2, [r3, #4] + } +} + 80070cc: bf00 nop + 80070ce: 370c adds r7, #12 + 80070d0: 46bd mov sp, r7 + 80070d2: f85d 7b04 ldr.w r7, [sp], #4 + 80070d6: 4770 bx lr + +080070d8 : + * @brief Check the UART Idle State. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) +{ + 80070d8: b580 push {r7, lr} + 80070da: b098 sub sp, #96 @ 0x60 + 80070dc: af02 add r7, sp, #8 + 80070de: 6078 str r0, [r7, #4] + uint32_t tickstart; + + /* Initialize the UART ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + 80070e0: 687b ldr r3, [r7, #4] + 80070e2: 2200 movs r2, #0 + 80070e4: f8c3 2084 str.w r2, [r3, #132] @ 0x84 + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + 80070e8: f7fd f818 bl 800411c + 80070ec: 6578 str r0, [r7, #84] @ 0x54 + + /* Check if the Transmitter is enabled */ + if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + 80070ee: 687b ldr r3, [r7, #4] + 80070f0: 681b ldr r3, [r3, #0] + 80070f2: 681b ldr r3, [r3, #0] + 80070f4: f003 0308 and.w r3, r3, #8 + 80070f8: 2b08 cmp r3, #8 + 80070fa: d12e bne.n 800715a + { + /* Wait until TEACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + 80070fc: f06f 437e mvn.w r3, #4261412864 @ 0xfe000000 + 8007100: 9300 str r3, [sp, #0] + 8007102: 6d7b ldr r3, [r7, #84] @ 0x54 + 8007104: 2200 movs r2, #0 + 8007106: f44f 1100 mov.w r1, #2097152 @ 0x200000 + 800710a: 6878 ldr r0, [r7, #4] + 800710c: f000 f88c bl 8007228 + 8007110: 4603 mov r3, r0 + 8007112: 2b00 cmp r3, #0 + 8007114: d021 beq.n 800715a + { + /* Disable TXE interrupt for the interrupt process */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE)); + 8007116: 687b ldr r3, [r7, #4] + 8007118: 681b ldr r3, [r3, #0] + 800711a: 63bb str r3, [r7, #56] @ 0x38 + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + 800711c: 6bbb ldr r3, [r7, #56] @ 0x38 + 800711e: e853 3f00 ldrex r3, [r3] + 8007122: 637b str r3, [r7, #52] @ 0x34 + return(result); + 8007124: 6b7b ldr r3, [r7, #52] @ 0x34 + 8007126: f023 0380 bic.w r3, r3, #128 @ 0x80 + 800712a: 653b str r3, [r7, #80] @ 0x50 + 800712c: 687b ldr r3, [r7, #4] + 800712e: 681b ldr r3, [r3, #0] + 8007130: 461a mov r2, r3 + 8007132: 6d3b ldr r3, [r7, #80] @ 0x50 + 8007134: 647b str r3, [r7, #68] @ 0x44 + 8007136: 643a str r2, [r7, #64] @ 0x40 + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + 8007138: 6c39 ldr r1, [r7, #64] @ 0x40 + 800713a: 6c7a ldr r2, [r7, #68] @ 0x44 + 800713c: e841 2300 strex r3, r2, [r1] + 8007140: 63fb str r3, [r7, #60] @ 0x3c + return(result); + 8007142: 6bfb ldr r3, [r7, #60] @ 0x3c + 8007144: 2b00 cmp r3, #0 + 8007146: d1e6 bne.n 8007116 +#endif /* USART_CR1_FIFOEN */ + + huart->gState = HAL_UART_STATE_READY; + 8007148: 687b ldr r3, [r7, #4] + 800714a: 2220 movs r2, #32 + 800714c: 67da str r2, [r3, #124] @ 0x7c + + __HAL_UNLOCK(huart); + 800714e: 687b ldr r3, [r7, #4] + 8007150: 2200 movs r2, #0 + 8007152: f883 2078 strb.w r2, [r3, #120] @ 0x78 + + /* Timeout occurred */ + return HAL_TIMEOUT; + 8007156: 2303 movs r3, #3 + 8007158: e062 b.n 8007220 + } + } + + /* Check if the Receiver is enabled */ + if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + 800715a: 687b ldr r3, [r7, #4] + 800715c: 681b ldr r3, [r3, #0] + 800715e: 681b ldr r3, [r3, #0] + 8007160: f003 0304 and.w r3, r3, #4 + 8007164: 2b04 cmp r3, #4 + 8007166: d149 bne.n 80071fc + { + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + 8007168: f06f 437e mvn.w r3, #4261412864 @ 0xfe000000 + 800716c: 9300 str r3, [sp, #0] + 800716e: 6d7b ldr r3, [r7, #84] @ 0x54 + 8007170: 2200 movs r2, #0 + 8007172: f44f 0180 mov.w r1, #4194304 @ 0x400000 + 8007176: 6878 ldr r0, [r7, #4] + 8007178: f000 f856 bl 8007228 + 800717c: 4603 mov r3, r0 + 800717e: 2b00 cmp r3, #0 + 8007180: d03c beq.n 80071fc + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + 8007182: 687b ldr r3, [r7, #4] + 8007184: 681b ldr r3, [r3, #0] + 8007186: 627b str r3, [r7, #36] @ 0x24 + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + 8007188: 6a7b ldr r3, [r7, #36] @ 0x24 + 800718a: e853 3f00 ldrex r3, [r3] + 800718e: 623b str r3, [r7, #32] + return(result); + 8007190: 6a3b ldr r3, [r7, #32] + 8007192: f423 7390 bic.w r3, r3, #288 @ 0x120 + 8007196: 64fb str r3, [r7, #76] @ 0x4c + 8007198: 687b ldr r3, [r7, #4] + 800719a: 681b ldr r3, [r3, #0] + 800719c: 461a mov r2, r3 + 800719e: 6cfb ldr r3, [r7, #76] @ 0x4c + 80071a0: 633b str r3, [r7, #48] @ 0x30 + 80071a2: 62fa str r2, [r7, #44] @ 0x2c + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + 80071a4: 6af9 ldr r1, [r7, #44] @ 0x2c + 80071a6: 6b3a ldr r2, [r7, #48] @ 0x30 + 80071a8: e841 2300 strex r3, r2, [r1] + 80071ac: 62bb str r3, [r7, #40] @ 0x28 + return(result); + 80071ae: 6abb ldr r3, [r7, #40] @ 0x28 + 80071b0: 2b00 cmp r3, #0 + 80071b2: d1e6 bne.n 8007182 +#endif /* USART_CR1_FIFOEN */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + 80071b4: 687b ldr r3, [r7, #4] + 80071b6: 681b ldr r3, [r3, #0] + 80071b8: 3308 adds r3, #8 + 80071ba: 613b str r3, [r7, #16] + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + 80071bc: 693b ldr r3, [r7, #16] + 80071be: e853 3f00 ldrex r3, [r3] + 80071c2: 60fb str r3, [r7, #12] + return(result); + 80071c4: 68fb ldr r3, [r7, #12] + 80071c6: f023 0301 bic.w r3, r3, #1 + 80071ca: 64bb str r3, [r7, #72] @ 0x48 + 80071cc: 687b ldr r3, [r7, #4] + 80071ce: 681b ldr r3, [r3, #0] + 80071d0: 3308 adds r3, #8 + 80071d2: 6cba ldr r2, [r7, #72] @ 0x48 + 80071d4: 61fa str r2, [r7, #28] + 80071d6: 61bb str r3, [r7, #24] + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + 80071d8: 69b9 ldr r1, [r7, #24] + 80071da: 69fa ldr r2, [r7, #28] + 80071dc: e841 2300 strex r3, r2, [r1] + 80071e0: 617b str r3, [r7, #20] + return(result); + 80071e2: 697b ldr r3, [r7, #20] + 80071e4: 2b00 cmp r3, #0 + 80071e6: d1e5 bne.n 80071b4 + + huart->RxState = HAL_UART_STATE_READY; + 80071e8: 687b ldr r3, [r7, #4] + 80071ea: 2220 movs r2, #32 + 80071ec: f8c3 2080 str.w r2, [r3, #128] @ 0x80 + + __HAL_UNLOCK(huart); + 80071f0: 687b ldr r3, [r7, #4] + 80071f2: 2200 movs r2, #0 + 80071f4: f883 2078 strb.w r2, [r3, #120] @ 0x78 + + /* Timeout occurred */ + return HAL_TIMEOUT; + 80071f8: 2303 movs r3, #3 + 80071fa: e011 b.n 8007220 + } + } + + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + 80071fc: 687b ldr r3, [r7, #4] + 80071fe: 2220 movs r2, #32 + 8007200: 67da str r2, [r3, #124] @ 0x7c + huart->RxState = HAL_UART_STATE_READY; + 8007202: 687b ldr r3, [r7, #4] + 8007204: 2220 movs r2, #32 + 8007206: f8c3 2080 str.w r2, [r3, #128] @ 0x80 + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + 800720a: 687b ldr r3, [r7, #4] + 800720c: 2200 movs r2, #0 + 800720e: 661a str r2, [r3, #96] @ 0x60 + huart->RxEventType = HAL_UART_RXEVENT_TC; + 8007210: 687b ldr r3, [r7, #4] + 8007212: 2200 movs r2, #0 + 8007214: 665a str r2, [r3, #100] @ 0x64 + + __HAL_UNLOCK(huart); + 8007216: 687b ldr r3, [r7, #4] + 8007218: 2200 movs r2, #0 + 800721a: f883 2078 strb.w r2, [r3, #120] @ 0x78 + + return HAL_OK; + 800721e: 2300 movs r3, #0 +} + 8007220: 4618 mov r0, r3 + 8007222: 3758 adds r7, #88 @ 0x58 + 8007224: 46bd mov sp, r7 + 8007226: bd80 pop {r7, pc} + +08007228 : + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + 8007228: b580 push {r7, lr} + 800722a: b084 sub sp, #16 + 800722c: af00 add r7, sp, #0 + 800722e: 60f8 str r0, [r7, #12] + 8007230: 60b9 str r1, [r7, #8] + 8007232: 603b str r3, [r7, #0] + 8007234: 4613 mov r3, r2 + 8007236: 71fb strb r3, [r7, #7] + /* Wait until flag is set */ + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + 8007238: e04f b.n 80072da + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + 800723a: 69bb ldr r3, [r7, #24] + 800723c: f1b3 3fff cmp.w r3, #4294967295 + 8007240: d04b beq.n 80072da + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + 8007242: f7fc ff6b bl 800411c + 8007246: 4602 mov r2, r0 + 8007248: 683b ldr r3, [r7, #0] + 800724a: 1ad3 subs r3, r2, r3 + 800724c: 69ba ldr r2, [r7, #24] + 800724e: 429a cmp r2, r3 + 8007250: d302 bcc.n 8007258 + 8007252: 69bb ldr r3, [r7, #24] + 8007254: 2b00 cmp r3, #0 + 8007256: d101 bne.n 800725c + { + + return HAL_TIMEOUT; + 8007258: 2303 movs r3, #3 + 800725a: e04e b.n 80072fa + } + + if ((READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) && (Flag != UART_FLAG_TXE) && (Flag != UART_FLAG_TC)) + 800725c: 68fb ldr r3, [r7, #12] + 800725e: 681b ldr r3, [r3, #0] + 8007260: 681b ldr r3, [r3, #0] + 8007262: f003 0304 and.w r3, r3, #4 + 8007266: 2b00 cmp r3, #0 + 8007268: d037 beq.n 80072da + 800726a: 68bb ldr r3, [r7, #8] + 800726c: 2b80 cmp r3, #128 @ 0x80 + 800726e: d034 beq.n 80072da + 8007270: 68bb ldr r3, [r7, #8] + 8007272: 2b40 cmp r3, #64 @ 0x40 + 8007274: d031 beq.n 80072da + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) == SET) + 8007276: 68fb ldr r3, [r7, #12] + 8007278: 681b ldr r3, [r3, #0] + 800727a: 69db ldr r3, [r3, #28] + 800727c: f003 0308 and.w r3, r3, #8 + 8007280: 2b08 cmp r3, #8 + 8007282: d110 bne.n 80072a6 + { + /* Clear Overrun Error flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + 8007284: 68fb ldr r3, [r7, #12] + 8007286: 681b ldr r3, [r3, #0] + 8007288: 2208 movs r2, #8 + 800728a: 621a str r2, [r3, #32] + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + 800728c: 68f8 ldr r0, [r7, #12] + 800728e: f000 f838 bl 8007302 + + huart->ErrorCode = HAL_UART_ERROR_ORE; + 8007292: 68fb ldr r3, [r7, #12] + 8007294: 2208 movs r2, #8 + 8007296: f8c3 2084 str.w r2, [r3, #132] @ 0x84 + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + 800729a: 68fb ldr r3, [r7, #12] + 800729c: 2200 movs r2, #0 + 800729e: f883 2078 strb.w r2, [r3, #120] @ 0x78 + + return HAL_ERROR; + 80072a2: 2301 movs r3, #1 + 80072a4: e029 b.n 80072fa + } + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) + 80072a6: 68fb ldr r3, [r7, #12] + 80072a8: 681b ldr r3, [r3, #0] + 80072aa: 69db ldr r3, [r3, #28] + 80072ac: f403 6300 and.w r3, r3, #2048 @ 0x800 + 80072b0: f5b3 6f00 cmp.w r3, #2048 @ 0x800 + 80072b4: d111 bne.n 80072da + { + /* Clear Receiver Timeout flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + 80072b6: 68fb ldr r3, [r7, #12] + 80072b8: 681b ldr r3, [r3, #0] + 80072ba: f44f 6200 mov.w r2, #2048 @ 0x800 + 80072be: 621a str r2, [r3, #32] + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + 80072c0: 68f8 ldr r0, [r7, #12] + 80072c2: f000 f81e bl 8007302 + + huart->ErrorCode = HAL_UART_ERROR_RTO; + 80072c6: 68fb ldr r3, [r7, #12] + 80072c8: 2220 movs r2, #32 + 80072ca: f8c3 2084 str.w r2, [r3, #132] @ 0x84 + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + 80072ce: 68fb ldr r3, [r7, #12] + 80072d0: 2200 movs r2, #0 + 80072d2: f883 2078 strb.w r2, [r3, #120] @ 0x78 + + return HAL_TIMEOUT; + 80072d6: 2303 movs r3, #3 + 80072d8: e00f b.n 80072fa + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + 80072da: 68fb ldr r3, [r7, #12] + 80072dc: 681b ldr r3, [r3, #0] + 80072de: 69da ldr r2, [r3, #28] + 80072e0: 68bb ldr r3, [r7, #8] + 80072e2: 4013 ands r3, r2 + 80072e4: 68ba ldr r2, [r7, #8] + 80072e6: 429a cmp r2, r3 + 80072e8: bf0c ite eq + 80072ea: 2301 moveq r3, #1 + 80072ec: 2300 movne r3, #0 + 80072ee: b2db uxtb r3, r3 + 80072f0: 461a mov r2, r3 + 80072f2: 79fb ldrb r3, [r7, #7] + 80072f4: 429a cmp r2, r3 + 80072f6: d0a0 beq.n 800723a + } + } + } + } + return HAL_OK; + 80072f8: 2300 movs r3, #0 +} + 80072fa: 4618 mov r0, r3 + 80072fc: 3710 adds r7, #16 + 80072fe: 46bd mov sp, r7 + 8007300: bd80 pop {r7, pc} + +08007302 : + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart) +{ + 8007302: b480 push {r7} + 8007304: b095 sub sp, #84 @ 0x54 + 8007306: af00 add r7, sp, #0 + 8007308: 6078 str r0, [r7, #4] + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + 800730a: 687b ldr r3, [r7, #4] + 800730c: 681b ldr r3, [r3, #0] + 800730e: 637b str r3, [r7, #52] @ 0x34 + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + 8007310: 6b7b ldr r3, [r7, #52] @ 0x34 + 8007312: e853 3f00 ldrex r3, [r3] + 8007316: 633b str r3, [r7, #48] @ 0x30 + return(result); + 8007318: 6b3b ldr r3, [r7, #48] @ 0x30 + 800731a: f423 7390 bic.w r3, r3, #288 @ 0x120 + 800731e: 64fb str r3, [r7, #76] @ 0x4c + 8007320: 687b ldr r3, [r7, #4] + 8007322: 681b ldr r3, [r3, #0] + 8007324: 461a mov r2, r3 + 8007326: 6cfb ldr r3, [r7, #76] @ 0x4c + 8007328: 643b str r3, [r7, #64] @ 0x40 + 800732a: 63fa str r2, [r7, #60] @ 0x3c + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + 800732c: 6bf9 ldr r1, [r7, #60] @ 0x3c + 800732e: 6c3a ldr r2, [r7, #64] @ 0x40 + 8007330: e841 2300 strex r3, r2, [r1] + 8007334: 63bb str r3, [r7, #56] @ 0x38 + return(result); + 8007336: 6bbb ldr r3, [r7, #56] @ 0x38 + 8007338: 2b00 cmp r3, #0 + 800733a: d1e6 bne.n 800730a + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + 800733c: 687b ldr r3, [r7, #4] + 800733e: 681b ldr r3, [r3, #0] + 8007340: 3308 adds r3, #8 + 8007342: 623b str r3, [r7, #32] + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + 8007344: 6a3b ldr r3, [r7, #32] + 8007346: e853 3f00 ldrex r3, [r3] + 800734a: 61fb str r3, [r7, #28] + return(result); + 800734c: 69fb ldr r3, [r7, #28] + 800734e: f023 0301 bic.w r3, r3, #1 + 8007352: 64bb str r3, [r7, #72] @ 0x48 + 8007354: 687b ldr r3, [r7, #4] + 8007356: 681b ldr r3, [r3, #0] + 8007358: 3308 adds r3, #8 + 800735a: 6cba ldr r2, [r7, #72] @ 0x48 + 800735c: 62fa str r2, [r7, #44] @ 0x2c + 800735e: 62bb str r3, [r7, #40] @ 0x28 + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + 8007360: 6ab9 ldr r1, [r7, #40] @ 0x28 + 8007362: 6afa ldr r2, [r7, #44] @ 0x2c + 8007364: e841 2300 strex r3, r2, [r1] + 8007368: 627b str r3, [r7, #36] @ 0x24 + return(result); + 800736a: 6a7b ldr r3, [r7, #36] @ 0x24 + 800736c: 2b00 cmp r3, #0 + 800736e: d1e5 bne.n 800733c +#endif /* USART_CR1_FIFOEN */ + + /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + 8007370: 687b ldr r3, [r7, #4] + 8007372: 6e1b ldr r3, [r3, #96] @ 0x60 + 8007374: 2b01 cmp r3, #1 + 8007376: d118 bne.n 80073aa + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + 8007378: 687b ldr r3, [r7, #4] + 800737a: 681b ldr r3, [r3, #0] + 800737c: 60fb str r3, [r7, #12] + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + 800737e: 68fb ldr r3, [r7, #12] + 8007380: e853 3f00 ldrex r3, [r3] + 8007384: 60bb str r3, [r7, #8] + return(result); + 8007386: 68bb ldr r3, [r7, #8] + 8007388: f023 0310 bic.w r3, r3, #16 + 800738c: 647b str r3, [r7, #68] @ 0x44 + 800738e: 687b ldr r3, [r7, #4] + 8007390: 681b ldr r3, [r3, #0] + 8007392: 461a mov r2, r3 + 8007394: 6c7b ldr r3, [r7, #68] @ 0x44 + 8007396: 61bb str r3, [r7, #24] + 8007398: 617a str r2, [r7, #20] + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + 800739a: 6979 ldr r1, [r7, #20] + 800739c: 69ba ldr r2, [r7, #24] + 800739e: e841 2300 strex r3, r2, [r1] + 80073a2: 613b str r3, [r7, #16] + return(result); + 80073a4: 693b ldr r3, [r7, #16] + 80073a6: 2b00 cmp r3, #0 + 80073a8: d1e6 bne.n 8007378 + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + 80073aa: 687b ldr r3, [r7, #4] + 80073ac: 2220 movs r2, #32 + 80073ae: f8c3 2080 str.w r2, [r3, #128] @ 0x80 + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + 80073b2: 687b ldr r3, [r7, #4] + 80073b4: 2200 movs r2, #0 + 80073b6: 661a str r2, [r3, #96] @ 0x60 + + /* Reset RxIsr function pointer */ + huart->RxISR = NULL; + 80073b8: 687b ldr r3, [r7, #4] + 80073ba: 2200 movs r2, #0 + 80073bc: 669a str r2, [r3, #104] @ 0x68 +} + 80073be: bf00 nop + 80073c0: 3754 adds r7, #84 @ 0x54 + 80073c2: 46bd mov sp, r7 + 80073c4: f85d 7b04 ldr.w r7, [sp], #4 + 80073c8: 4770 bx lr + +080073ca <__cvt>: + 80073ca: e92d 47ff stmdb sp!, {r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, sl, lr} + 80073ce: ec57 6b10 vmov r6, r7, d0 + 80073d2: 2f00 cmp r7, #0 + 80073d4: 460c mov r4, r1 + 80073d6: 4619 mov r1, r3 + 80073d8: 463b mov r3, r7 + 80073da: bfbb ittet lt + 80073dc: f107 4300 addlt.w r3, r7, #2147483648 @ 0x80000000 + 80073e0: 461f movlt r7, r3 + 80073e2: 2300 movge r3, #0 + 80073e4: 232d movlt r3, #45 @ 0x2d + 80073e6: 700b strb r3, [r1, #0] + 80073e8: 9b0d ldr r3, [sp, #52] @ 0x34 + 80073ea: f8dd a030 ldr.w sl, [sp, #48] @ 0x30 + 80073ee: 4691 mov r9, r2 + 80073f0: f023 0820 bic.w r8, r3, #32 + 80073f4: bfbc itt lt + 80073f6: 4632 movlt r2, r6 + 80073f8: 4616 movlt r6, r2 + 80073fa: f1b8 0f46 cmp.w r8, #70 @ 0x46 + 80073fe: d005 beq.n 800740c <__cvt+0x42> + 8007400: f1b8 0f45 cmp.w r8, #69 @ 0x45 + 8007404: d100 bne.n 8007408 <__cvt+0x3e> + 8007406: 3401 adds r4, #1 + 8007408: 2102 movs r1, #2 + 800740a: e000 b.n 800740e <__cvt+0x44> + 800740c: 2103 movs r1, #3 + 800740e: ab03 add r3, sp, #12 + 8007410: 9301 str r3, [sp, #4] + 8007412: ab02 add r3, sp, #8 + 8007414: 9300 str r3, [sp, #0] + 8007416: ec47 6b10 vmov d0, r6, r7 + 800741a: 4653 mov r3, sl + 800741c: 4622 mov r2, r4 + 800741e: f000 fe7f bl 8008120 <_dtoa_r> + 8007422: f1b8 0f47 cmp.w r8, #71 @ 0x47 + 8007426: 4605 mov r5, r0 + 8007428: d119 bne.n 800745e <__cvt+0x94> + 800742a: f019 0f01 tst.w r9, #1 + 800742e: d00e beq.n 800744e <__cvt+0x84> + 8007430: eb00 0904 add.w r9, r0, r4 + 8007434: 2200 movs r2, #0 + 8007436: 2300 movs r3, #0 + 8007438: 4630 mov r0, r6 + 800743a: 4639 mov r1, r7 + 800743c: f7f9 fb4c bl 8000ad8 <__aeabi_dcmpeq> + 8007440: b108 cbz r0, 8007446 <__cvt+0x7c> + 8007442: f8cd 900c str.w r9, [sp, #12] + 8007446: 2230 movs r2, #48 @ 0x30 + 8007448: 9b03 ldr r3, [sp, #12] + 800744a: 454b cmp r3, r9 + 800744c: d31e bcc.n 800748c <__cvt+0xc2> + 800744e: 9b03 ldr r3, [sp, #12] + 8007450: 9a0e ldr r2, [sp, #56] @ 0x38 + 8007452: 1b5b subs r3, r3, r5 + 8007454: 4628 mov r0, r5 + 8007456: 6013 str r3, [r2, #0] + 8007458: b004 add sp, #16 + 800745a: e8bd 87f0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, pc} + 800745e: f1b8 0f46 cmp.w r8, #70 @ 0x46 + 8007462: eb00 0904 add.w r9, r0, r4 + 8007466: d1e5 bne.n 8007434 <__cvt+0x6a> + 8007468: 7803 ldrb r3, [r0, #0] + 800746a: 2b30 cmp r3, #48 @ 0x30 + 800746c: d10a bne.n 8007484 <__cvt+0xba> + 800746e: 2200 movs r2, #0 + 8007470: 2300 movs r3, #0 + 8007472: 4630 mov r0, r6 + 8007474: 4639 mov r1, r7 + 8007476: f7f9 fb2f bl 8000ad8 <__aeabi_dcmpeq> + 800747a: b918 cbnz r0, 8007484 <__cvt+0xba> + 800747c: f1c4 0401 rsb r4, r4, #1 + 8007480: f8ca 4000 str.w r4, [sl] + 8007484: f8da 3000 ldr.w r3, [sl] + 8007488: 4499 add r9, r3 + 800748a: e7d3 b.n 8007434 <__cvt+0x6a> + 800748c: 1c59 adds r1, r3, #1 + 800748e: 9103 str r1, [sp, #12] + 8007490: 701a strb r2, [r3, #0] + 8007492: e7d9 b.n 8007448 <__cvt+0x7e> + +08007494 <__exponent>: + 8007494: b5f7 push {r0, r1, r2, r4, r5, r6, r7, lr} + 8007496: 2900 cmp r1, #0 + 8007498: bfba itte lt + 800749a: 4249 neglt r1, r1 + 800749c: 232d movlt r3, #45 @ 0x2d + 800749e: 232b movge r3, #43 @ 0x2b + 80074a0: 2909 cmp r1, #9 + 80074a2: 7002 strb r2, [r0, #0] + 80074a4: 7043 strb r3, [r0, #1] + 80074a6: dd29 ble.n 80074fc <__exponent+0x68> + 80074a8: f10d 0307 add.w r3, sp, #7 + 80074ac: 461d mov r5, r3 + 80074ae: 270a movs r7, #10 + 80074b0: 461a mov r2, r3 + 80074b2: fbb1 f6f7 udiv r6, r1, r7 + 80074b6: fb07 1416 mls r4, r7, r6, r1 + 80074ba: 3430 adds r4, #48 @ 0x30 + 80074bc: f802 4c01 strb.w r4, [r2, #-1] + 80074c0: 460c mov r4, r1 + 80074c2: 2c63 cmp r4, #99 @ 0x63 + 80074c4: f103 33ff add.w r3, r3, #4294967295 + 80074c8: 4631 mov r1, r6 + 80074ca: dcf1 bgt.n 80074b0 <__exponent+0x1c> + 80074cc: 3130 adds r1, #48 @ 0x30 + 80074ce: 1e94 subs r4, r2, #2 + 80074d0: f803 1c01 strb.w r1, [r3, #-1] + 80074d4: 1c41 adds r1, r0, #1 + 80074d6: 4623 mov r3, r4 + 80074d8: 42ab cmp r3, r5 + 80074da: d30a bcc.n 80074f2 <__exponent+0x5e> + 80074dc: f10d 0309 add.w r3, sp, #9 + 80074e0: 1a9b subs r3, r3, r2 + 80074e2: 42ac cmp r4, r5 + 80074e4: bf88 it hi + 80074e6: 2300 movhi r3, #0 + 80074e8: 3302 adds r3, #2 + 80074ea: 4403 add r3, r0 + 80074ec: 1a18 subs r0, r3, r0 + 80074ee: b003 add sp, #12 + 80074f0: bdf0 pop {r4, r5, r6, r7, pc} + 80074f2: f813 6b01 ldrb.w r6, [r3], #1 + 80074f6: f801 6f01 strb.w r6, [r1, #1]! + 80074fa: e7ed b.n 80074d8 <__exponent+0x44> + 80074fc: 2330 movs r3, #48 @ 0x30 + 80074fe: 3130 adds r1, #48 @ 0x30 + 8007500: 7083 strb r3, [r0, #2] + 8007502: 70c1 strb r1, [r0, #3] + 8007504: 1d03 adds r3, r0, #4 + 8007506: e7f1 b.n 80074ec <__exponent+0x58> + +08007508 <_printf_float>: + 8007508: e92d 4ff0 stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, fp, lr} + 800750c: b08d sub sp, #52 @ 0x34 + 800750e: 460c mov r4, r1 + 8007510: f8dd 8058 ldr.w r8, [sp, #88] @ 0x58 + 8007514: 4616 mov r6, r2 + 8007516: 461f mov r7, r3 + 8007518: 4605 mov r5, r0 + 800751a: f000 fd01 bl 8007f20 <_localeconv_r> + 800751e: 6803 ldr r3, [r0, #0] + 8007520: 9304 str r3, [sp, #16] + 8007522: 4618 mov r0, r3 + 8007524: f7f8 feac bl 8000280 + 8007528: 2300 movs r3, #0 + 800752a: 930a str r3, [sp, #40] @ 0x28 + 800752c: f8d8 3000 ldr.w r3, [r8] + 8007530: 9005 str r0, [sp, #20] + 8007532: 3307 adds r3, #7 + 8007534: f023 0307 bic.w r3, r3, #7 + 8007538: f103 0208 add.w r2, r3, #8 + 800753c: f894 a018 ldrb.w sl, [r4, #24] + 8007540: f8d4 b000 ldr.w fp, [r4] + 8007544: f8c8 2000 str.w r2, [r8] + 8007548: e9d3 8900 ldrd r8, r9, [r3] + 800754c: f029 4300 bic.w r3, r9, #2147483648 @ 0x80000000 + 8007550: 9307 str r3, [sp, #28] + 8007552: f8cd 8018 str.w r8, [sp, #24] + 8007556: e9c4 8912 strd r8, r9, [r4, #72] @ 0x48 + 800755a: e9dd 0106 ldrd r0, r1, [sp, #24] + 800755e: 4b9c ldr r3, [pc, #624] @ (80077d0 <_printf_float+0x2c8>) + 8007560: f04f 32ff mov.w r2, #4294967295 + 8007564: f7f9 faea bl 8000b3c <__aeabi_dcmpun> + 8007568: bb70 cbnz r0, 80075c8 <_printf_float+0xc0> + 800756a: e9dd 0106 ldrd r0, r1, [sp, #24] + 800756e: 4b98 ldr r3, [pc, #608] @ (80077d0 <_printf_float+0x2c8>) + 8007570: f04f 32ff mov.w r2, #4294967295 + 8007574: f7f9 fac4 bl 8000b00 <__aeabi_dcmple> + 8007578: bb30 cbnz r0, 80075c8 <_printf_float+0xc0> + 800757a: 2200 movs r2, #0 + 800757c: 2300 movs r3, #0 + 800757e: 4640 mov r0, r8 + 8007580: 4649 mov r1, r9 + 8007582: f7f9 fab3 bl 8000aec <__aeabi_dcmplt> + 8007586: b110 cbz r0, 800758e <_printf_float+0x86> + 8007588: 232d movs r3, #45 @ 0x2d + 800758a: f884 3043 strb.w r3, [r4, #67] @ 0x43 + 800758e: 4a91 ldr r2, [pc, #580] @ (80077d4 <_printf_float+0x2cc>) + 8007590: 4b91 ldr r3, [pc, #580] @ (80077d8 <_printf_float+0x2d0>) + 8007592: f1ba 0f47 cmp.w sl, #71 @ 0x47 + 8007596: bf8c ite hi + 8007598: 4690 movhi r8, r2 + 800759a: 4698 movls r8, r3 + 800759c: 2303 movs r3, #3 + 800759e: 6123 str r3, [r4, #16] + 80075a0: f02b 0304 bic.w r3, fp, #4 + 80075a4: 6023 str r3, [r4, #0] + 80075a6: f04f 0900 mov.w r9, #0 + 80075aa: 9700 str r7, [sp, #0] + 80075ac: 4633 mov r3, r6 + 80075ae: aa0b add r2, sp, #44 @ 0x2c + 80075b0: 4621 mov r1, r4 + 80075b2: 4628 mov r0, r5 + 80075b4: f000 f9d2 bl 800795c <_printf_common> + 80075b8: 3001 adds r0, #1 + 80075ba: f040 808d bne.w 80076d8 <_printf_float+0x1d0> + 80075be: f04f 30ff mov.w r0, #4294967295 + 80075c2: b00d add sp, #52 @ 0x34 + 80075c4: e8bd 8ff0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, fp, pc} + 80075c8: 4642 mov r2, r8 + 80075ca: 464b mov r3, r9 + 80075cc: 4640 mov r0, r8 + 80075ce: 4649 mov r1, r9 + 80075d0: f7f9 fab4 bl 8000b3c <__aeabi_dcmpun> + 80075d4: b140 cbz r0, 80075e8 <_printf_float+0xe0> + 80075d6: 464b mov r3, r9 + 80075d8: 2b00 cmp r3, #0 + 80075da: bfbc itt lt + 80075dc: 232d movlt r3, #45 @ 0x2d + 80075de: f884 3043 strblt.w r3, [r4, #67] @ 0x43 + 80075e2: 4a7e ldr r2, [pc, #504] @ (80077dc <_printf_float+0x2d4>) + 80075e4: 4b7e ldr r3, [pc, #504] @ (80077e0 <_printf_float+0x2d8>) + 80075e6: e7d4 b.n 8007592 <_printf_float+0x8a> + 80075e8: 6863 ldr r3, [r4, #4] + 80075ea: f00a 02df and.w r2, sl, #223 @ 0xdf + 80075ee: 9206 str r2, [sp, #24] + 80075f0: 1c5a adds r2, r3, #1 + 80075f2: d13b bne.n 800766c <_printf_float+0x164> + 80075f4: 2306 movs r3, #6 + 80075f6: 6063 str r3, [r4, #4] + 80075f8: f44b 6280 orr.w r2, fp, #1024 @ 0x400 + 80075fc: 2300 movs r3, #0 + 80075fe: 6022 str r2, [r4, #0] + 8007600: 9303 str r3, [sp, #12] + 8007602: ab0a add r3, sp, #40 @ 0x28 + 8007604: e9cd a301 strd sl, r3, [sp, #4] + 8007608: ab09 add r3, sp, #36 @ 0x24 + 800760a: 9300 str r3, [sp, #0] + 800760c: 6861 ldr r1, [r4, #4] + 800760e: ec49 8b10 vmov d0, r8, r9 + 8007612: f10d 0323 add.w r3, sp, #35 @ 0x23 + 8007616: 4628 mov r0, r5 + 8007618: f7ff fed7 bl 80073ca <__cvt> + 800761c: 9b06 ldr r3, [sp, #24] + 800761e: 9909 ldr r1, [sp, #36] @ 0x24 + 8007620: 2b47 cmp r3, #71 @ 0x47 + 8007622: 4680 mov r8, r0 + 8007624: d129 bne.n 800767a <_printf_float+0x172> + 8007626: 1cc8 adds r0, r1, #3 + 8007628: db02 blt.n 8007630 <_printf_float+0x128> + 800762a: 6863 ldr r3, [r4, #4] + 800762c: 4299 cmp r1, r3 + 800762e: dd41 ble.n 80076b4 <_printf_float+0x1ac> + 8007630: f1aa 0a02 sub.w sl, sl, #2 + 8007634: fa5f fa8a uxtb.w sl, sl + 8007638: 3901 subs r1, #1 + 800763a: 4652 mov r2, sl + 800763c: f104 0050 add.w r0, r4, #80 @ 0x50 + 8007640: 9109 str r1, [sp, #36] @ 0x24 + 8007642: f7ff ff27 bl 8007494 <__exponent> + 8007646: 9a0a ldr r2, [sp, #40] @ 0x28 + 8007648: 1813 adds r3, r2, r0 + 800764a: 2a01 cmp r2, #1 + 800764c: 4681 mov r9, r0 + 800764e: 6123 str r3, [r4, #16] + 8007650: dc02 bgt.n 8007658 <_printf_float+0x150> + 8007652: 6822 ldr r2, [r4, #0] + 8007654: 07d2 lsls r2, r2, #31 + 8007656: d501 bpl.n 800765c <_printf_float+0x154> + 8007658: 3301 adds r3, #1 + 800765a: 6123 str r3, [r4, #16] + 800765c: f89d 3023 ldrb.w r3, [sp, #35] @ 0x23 + 8007660: 2b00 cmp r3, #0 + 8007662: d0a2 beq.n 80075aa <_printf_float+0xa2> + 8007664: 232d movs r3, #45 @ 0x2d + 8007666: f884 3043 strb.w r3, [r4, #67] @ 0x43 + 800766a: e79e b.n 80075aa <_printf_float+0xa2> + 800766c: 9a06 ldr r2, [sp, #24] + 800766e: 2a47 cmp r2, #71 @ 0x47 + 8007670: d1c2 bne.n 80075f8 <_printf_float+0xf0> + 8007672: 2b00 cmp r3, #0 + 8007674: d1c0 bne.n 80075f8 <_printf_float+0xf0> + 8007676: 2301 movs r3, #1 + 8007678: e7bd b.n 80075f6 <_printf_float+0xee> + 800767a: f1ba 0f65 cmp.w sl, #101 @ 0x65 + 800767e: d9db bls.n 8007638 <_printf_float+0x130> + 8007680: f1ba 0f66 cmp.w sl, #102 @ 0x66 + 8007684: d118 bne.n 80076b8 <_printf_float+0x1b0> + 8007686: 2900 cmp r1, #0 + 8007688: 6863 ldr r3, [r4, #4] + 800768a: dd0b ble.n 80076a4 <_printf_float+0x19c> + 800768c: 6121 str r1, [r4, #16] + 800768e: b913 cbnz r3, 8007696 <_printf_float+0x18e> + 8007690: 6822 ldr r2, [r4, #0] + 8007692: 07d0 lsls r0, r2, #31 + 8007694: d502 bpl.n 800769c <_printf_float+0x194> + 8007696: 3301 adds r3, #1 + 8007698: 440b add r3, r1 + 800769a: 6123 str r3, [r4, #16] + 800769c: 65a1 str r1, [r4, #88] @ 0x58 + 800769e: f04f 0900 mov.w r9, #0 + 80076a2: e7db b.n 800765c <_printf_float+0x154> + 80076a4: b913 cbnz r3, 80076ac <_printf_float+0x1a4> + 80076a6: 6822 ldr r2, [r4, #0] + 80076a8: 07d2 lsls r2, r2, #31 + 80076aa: d501 bpl.n 80076b0 <_printf_float+0x1a8> + 80076ac: 3302 adds r3, #2 + 80076ae: e7f4 b.n 800769a <_printf_float+0x192> + 80076b0: 2301 movs r3, #1 + 80076b2: e7f2 b.n 800769a <_printf_float+0x192> + 80076b4: f04f 0a67 mov.w sl, #103 @ 0x67 + 80076b8: 9b0a ldr r3, [sp, #40] @ 0x28 + 80076ba: 4299 cmp r1, r3 + 80076bc: db05 blt.n 80076ca <_printf_float+0x1c2> + 80076be: 6823 ldr r3, [r4, #0] + 80076c0: 6121 str r1, [r4, #16] + 80076c2: 07d8 lsls r0, r3, #31 + 80076c4: d5ea bpl.n 800769c <_printf_float+0x194> + 80076c6: 1c4b adds r3, r1, #1 + 80076c8: e7e7 b.n 800769a <_printf_float+0x192> + 80076ca: 2900 cmp r1, #0 + 80076cc: bfd4 ite le + 80076ce: f1c1 0202 rsble r2, r1, #2 + 80076d2: 2201 movgt r2, #1 + 80076d4: 4413 add r3, r2 + 80076d6: e7e0 b.n 800769a <_printf_float+0x192> + 80076d8: 6823 ldr r3, [r4, #0] + 80076da: 055a lsls r2, r3, #21 + 80076dc: d407 bmi.n 80076ee <_printf_float+0x1e6> + 80076de: 6923 ldr r3, [r4, #16] + 80076e0: 4642 mov r2, r8 + 80076e2: 4631 mov r1, r6 + 80076e4: 4628 mov r0, r5 + 80076e6: 47b8 blx r7 + 80076e8: 3001 adds r0, #1 + 80076ea: d12b bne.n 8007744 <_printf_float+0x23c> + 80076ec: e767 b.n 80075be <_printf_float+0xb6> + 80076ee: f1ba 0f65 cmp.w sl, #101 @ 0x65 + 80076f2: f240 80dd bls.w 80078b0 <_printf_float+0x3a8> + 80076f6: e9d4 0112 ldrd r0, r1, [r4, #72] @ 0x48 + 80076fa: 2200 movs r2, #0 + 80076fc: 2300 movs r3, #0 + 80076fe: f7f9 f9eb bl 8000ad8 <__aeabi_dcmpeq> + 8007702: 2800 cmp r0, #0 + 8007704: d033 beq.n 800776e <_printf_float+0x266> + 8007706: 4a37 ldr r2, [pc, #220] @ (80077e4 <_printf_float+0x2dc>) + 8007708: 2301 movs r3, #1 + 800770a: 4631 mov r1, r6 + 800770c: 4628 mov r0, r5 + 800770e: 47b8 blx r7 + 8007710: 3001 adds r0, #1 + 8007712: f43f af54 beq.w 80075be <_printf_float+0xb6> + 8007716: e9dd 3809 ldrd r3, r8, [sp, #36] @ 0x24 + 800771a: 4543 cmp r3, r8 + 800771c: db02 blt.n 8007724 <_printf_float+0x21c> + 800771e: 6823 ldr r3, [r4, #0] + 8007720: 07d8 lsls r0, r3, #31 + 8007722: d50f bpl.n 8007744 <_printf_float+0x23c> + 8007724: e9dd 2304 ldrd r2, r3, [sp, #16] + 8007728: 4631 mov r1, r6 + 800772a: 4628 mov r0, r5 + 800772c: 47b8 blx r7 + 800772e: 3001 adds r0, #1 + 8007730: f43f af45 beq.w 80075be <_printf_float+0xb6> + 8007734: f04f 0900 mov.w r9, #0 + 8007738: f108 38ff add.w r8, r8, #4294967295 + 800773c: f104 0a1a add.w sl, r4, #26 + 8007740: 45c8 cmp r8, r9 + 8007742: dc09 bgt.n 8007758 <_printf_float+0x250> + 8007744: 6823 ldr r3, [r4, #0] + 8007746: 079b lsls r3, r3, #30 + 8007748: f100 8103 bmi.w 8007952 <_printf_float+0x44a> + 800774c: 68e0 ldr r0, [r4, #12] + 800774e: 9b0b ldr r3, [sp, #44] @ 0x2c + 8007750: 4298 cmp r0, r3 + 8007752: bfb8 it lt + 8007754: 4618 movlt r0, r3 + 8007756: e734 b.n 80075c2 <_printf_float+0xba> + 8007758: 2301 movs r3, #1 + 800775a: 4652 mov r2, sl + 800775c: 4631 mov r1, r6 + 800775e: 4628 mov r0, r5 + 8007760: 47b8 blx r7 + 8007762: 3001 adds r0, #1 + 8007764: f43f af2b beq.w 80075be <_printf_float+0xb6> + 8007768: f109 0901 add.w r9, r9, #1 + 800776c: e7e8 b.n 8007740 <_printf_float+0x238> + 800776e: 9b09 ldr r3, [sp, #36] @ 0x24 + 8007770: 2b00 cmp r3, #0 + 8007772: dc39 bgt.n 80077e8 <_printf_float+0x2e0> + 8007774: 4a1b ldr r2, [pc, #108] @ (80077e4 <_printf_float+0x2dc>) + 8007776: 2301 movs r3, #1 + 8007778: 4631 mov r1, r6 + 800777a: 4628 mov r0, r5 + 800777c: 47b8 blx r7 + 800777e: 3001 adds r0, #1 + 8007780: f43f af1d beq.w 80075be <_printf_float+0xb6> + 8007784: e9dd 3909 ldrd r3, r9, [sp, #36] @ 0x24 + 8007788: ea59 0303 orrs.w r3, r9, r3 + 800778c: d102 bne.n 8007794 <_printf_float+0x28c> + 800778e: 6823 ldr r3, [r4, #0] + 8007790: 07d9 lsls r1, r3, #31 + 8007792: d5d7 bpl.n 8007744 <_printf_float+0x23c> + 8007794: e9dd 2304 ldrd r2, r3, [sp, #16] + 8007798: 4631 mov r1, r6 + 800779a: 4628 mov r0, r5 + 800779c: 47b8 blx r7 + 800779e: 3001 adds r0, #1 + 80077a0: f43f af0d beq.w 80075be <_printf_float+0xb6> + 80077a4: f04f 0a00 mov.w sl, #0 + 80077a8: f104 0b1a add.w fp, r4, #26 + 80077ac: 9b09 ldr r3, [sp, #36] @ 0x24 + 80077ae: 425b negs r3, r3 + 80077b0: 4553 cmp r3, sl + 80077b2: dc01 bgt.n 80077b8 <_printf_float+0x2b0> + 80077b4: 464b mov r3, r9 + 80077b6: e793 b.n 80076e0 <_printf_float+0x1d8> + 80077b8: 2301 movs r3, #1 + 80077ba: 465a mov r2, fp + 80077bc: 4631 mov r1, r6 + 80077be: 4628 mov r0, r5 + 80077c0: 47b8 blx r7 + 80077c2: 3001 adds r0, #1 + 80077c4: f43f aefb beq.w 80075be <_printf_float+0xb6> + 80077c8: f10a 0a01 add.w sl, sl, #1 + 80077cc: e7ee b.n 80077ac <_printf_float+0x2a4> + 80077ce: bf00 nop + 80077d0: 7fefffff .word 0x7fefffff + 80077d4: 0800b940 .word 0x0800b940 + 80077d8: 0800b93c .word 0x0800b93c + 80077dc: 0800b948 .word 0x0800b948 + 80077e0: 0800b944 .word 0x0800b944 + 80077e4: 0800b94c .word 0x0800b94c + 80077e8: 6da3 ldr r3, [r4, #88] @ 0x58 + 80077ea: f8dd a028 ldr.w sl, [sp, #40] @ 0x28 + 80077ee: 4553 cmp r3, sl + 80077f0: bfa8 it ge + 80077f2: 4653 movge r3, sl + 80077f4: 2b00 cmp r3, #0 + 80077f6: 4699 mov r9, r3 + 80077f8: dc36 bgt.n 8007868 <_printf_float+0x360> + 80077fa: f04f 0b00 mov.w fp, #0 + 80077fe: ea29 79e9 bic.w r9, r9, r9, asr #31 + 8007802: f104 021a add.w r2, r4, #26 + 8007806: 6da3 ldr r3, [r4, #88] @ 0x58 + 8007808: 9306 str r3, [sp, #24] + 800780a: eba3 0309 sub.w r3, r3, r9 + 800780e: 455b cmp r3, fp + 8007810: dc31 bgt.n 8007876 <_printf_float+0x36e> + 8007812: 9b09 ldr r3, [sp, #36] @ 0x24 + 8007814: 459a cmp sl, r3 + 8007816: dc3a bgt.n 800788e <_printf_float+0x386> + 8007818: 6823 ldr r3, [r4, #0] + 800781a: 07da lsls r2, r3, #31 + 800781c: d437 bmi.n 800788e <_printf_float+0x386> + 800781e: 9b09 ldr r3, [sp, #36] @ 0x24 + 8007820: ebaa 0903 sub.w r9, sl, r3 + 8007824: 9b06 ldr r3, [sp, #24] + 8007826: ebaa 0303 sub.w r3, sl, r3 + 800782a: 4599 cmp r9, r3 + 800782c: bfa8 it ge + 800782e: 4699 movge r9, r3 + 8007830: f1b9 0f00 cmp.w r9, #0 + 8007834: dc33 bgt.n 800789e <_printf_float+0x396> + 8007836: f04f 0800 mov.w r8, #0 + 800783a: ea29 79e9 bic.w r9, r9, r9, asr #31 + 800783e: f104 0b1a add.w fp, r4, #26 + 8007842: 9b09 ldr r3, [sp, #36] @ 0x24 + 8007844: ebaa 0303 sub.w r3, sl, r3 + 8007848: eba3 0309 sub.w r3, r3, r9 + 800784c: 4543 cmp r3, r8 + 800784e: f77f af79 ble.w 8007744 <_printf_float+0x23c> + 8007852: 2301 movs r3, #1 + 8007854: 465a mov r2, fp + 8007856: 4631 mov r1, r6 + 8007858: 4628 mov r0, r5 + 800785a: 47b8 blx r7 + 800785c: 3001 adds r0, #1 + 800785e: f43f aeae beq.w 80075be <_printf_float+0xb6> + 8007862: f108 0801 add.w r8, r8, #1 + 8007866: e7ec b.n 8007842 <_printf_float+0x33a> + 8007868: 4642 mov r2, r8 + 800786a: 4631 mov r1, r6 + 800786c: 4628 mov r0, r5 + 800786e: 47b8 blx r7 + 8007870: 3001 adds r0, #1 + 8007872: d1c2 bne.n 80077fa <_printf_float+0x2f2> + 8007874: e6a3 b.n 80075be <_printf_float+0xb6> + 8007876: 2301 movs r3, #1 + 8007878: 4631 mov r1, r6 + 800787a: 4628 mov r0, r5 + 800787c: 9206 str r2, [sp, #24] + 800787e: 47b8 blx r7 + 8007880: 3001 adds r0, #1 + 8007882: f43f ae9c beq.w 80075be <_printf_float+0xb6> + 8007886: 9a06 ldr r2, [sp, #24] + 8007888: f10b 0b01 add.w fp, fp, #1 + 800788c: e7bb b.n 8007806 <_printf_float+0x2fe> + 800788e: e9dd 2304 ldrd r2, r3, [sp, #16] + 8007892: 4631 mov r1, r6 + 8007894: 4628 mov r0, r5 + 8007896: 47b8 blx r7 + 8007898: 3001 adds r0, #1 + 800789a: d1c0 bne.n 800781e <_printf_float+0x316> + 800789c: e68f b.n 80075be <_printf_float+0xb6> + 800789e: 9a06 ldr r2, [sp, #24] + 80078a0: 464b mov r3, r9 + 80078a2: 4442 add r2, r8 + 80078a4: 4631 mov r1, r6 + 80078a6: 4628 mov r0, r5 + 80078a8: 47b8 blx r7 + 80078aa: 3001 adds r0, #1 + 80078ac: d1c3 bne.n 8007836 <_printf_float+0x32e> + 80078ae: e686 b.n 80075be <_printf_float+0xb6> + 80078b0: f8dd a028 ldr.w sl, [sp, #40] @ 0x28 + 80078b4: f1ba 0f01 cmp.w sl, #1 + 80078b8: dc01 bgt.n 80078be <_printf_float+0x3b6> + 80078ba: 07db lsls r3, r3, #31 + 80078bc: d536 bpl.n 800792c <_printf_float+0x424> + 80078be: 2301 movs r3, #1 + 80078c0: 4642 mov r2, r8 + 80078c2: 4631 mov r1, r6 + 80078c4: 4628 mov r0, r5 + 80078c6: 47b8 blx r7 + 80078c8: 3001 adds r0, #1 + 80078ca: f43f ae78 beq.w 80075be <_printf_float+0xb6> + 80078ce: e9dd 2304 ldrd r2, r3, [sp, #16] + 80078d2: 4631 mov r1, r6 + 80078d4: 4628 mov r0, r5 + 80078d6: 47b8 blx r7 + 80078d8: 3001 adds r0, #1 + 80078da: f43f ae70 beq.w 80075be <_printf_float+0xb6> + 80078de: e9d4 0112 ldrd r0, r1, [r4, #72] @ 0x48 + 80078e2: 2200 movs r2, #0 + 80078e4: 2300 movs r3, #0 + 80078e6: f10a 3aff add.w sl, sl, #4294967295 + 80078ea: f7f9 f8f5 bl 8000ad8 <__aeabi_dcmpeq> + 80078ee: b9c0 cbnz r0, 8007922 <_printf_float+0x41a> + 80078f0: 4653 mov r3, sl + 80078f2: f108 0201 add.w r2, r8, #1 + 80078f6: 4631 mov r1, r6 + 80078f8: 4628 mov r0, r5 + 80078fa: 47b8 blx r7 + 80078fc: 3001 adds r0, #1 + 80078fe: d10c bne.n 800791a <_printf_float+0x412> + 8007900: e65d b.n 80075be <_printf_float+0xb6> + 8007902: 2301 movs r3, #1 + 8007904: 465a mov r2, fp + 8007906: 4631 mov r1, r6 + 8007908: 4628 mov r0, r5 + 800790a: 47b8 blx r7 + 800790c: 3001 adds r0, #1 + 800790e: f43f ae56 beq.w 80075be <_printf_float+0xb6> + 8007912: f108 0801 add.w r8, r8, #1 + 8007916: 45d0 cmp r8, sl + 8007918: dbf3 blt.n 8007902 <_printf_float+0x3fa> + 800791a: 464b mov r3, r9 + 800791c: f104 0250 add.w r2, r4, #80 @ 0x50 + 8007920: e6df b.n 80076e2 <_printf_float+0x1da> + 8007922: f04f 0800 mov.w r8, #0 + 8007926: f104 0b1a add.w fp, r4, #26 + 800792a: e7f4 b.n 8007916 <_printf_float+0x40e> + 800792c: 2301 movs r3, #1 + 800792e: 4642 mov r2, r8 + 8007930: e7e1 b.n 80078f6 <_printf_float+0x3ee> + 8007932: 2301 movs r3, #1 + 8007934: 464a mov r2, r9 + 8007936: 4631 mov r1, r6 + 8007938: 4628 mov r0, r5 + 800793a: 47b8 blx r7 + 800793c: 3001 adds r0, #1 + 800793e: f43f ae3e beq.w 80075be <_printf_float+0xb6> + 8007942: f108 0801 add.w r8, r8, #1 + 8007946: 68e3 ldr r3, [r4, #12] + 8007948: 990b ldr r1, [sp, #44] @ 0x2c + 800794a: 1a5b subs r3, r3, r1 + 800794c: 4543 cmp r3, r8 + 800794e: dcf0 bgt.n 8007932 <_printf_float+0x42a> + 8007950: e6fc b.n 800774c <_printf_float+0x244> + 8007952: f04f 0800 mov.w r8, #0 + 8007956: f104 0919 add.w r9, r4, #25 + 800795a: e7f4 b.n 8007946 <_printf_float+0x43e> + +0800795c <_printf_common>: + 800795c: e92d 47f0 stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, lr} + 8007960: 4616 mov r6, r2 + 8007962: 4698 mov r8, r3 + 8007964: 688a ldr r2, [r1, #8] + 8007966: 690b ldr r3, [r1, #16] + 8007968: f8dd 9020 ldr.w r9, [sp, #32] + 800796c: 4293 cmp r3, r2 + 800796e: bfb8 it lt + 8007970: 4613 movlt r3, r2 + 8007972: 6033 str r3, [r6, #0] + 8007974: f891 2043 ldrb.w r2, [r1, #67] @ 0x43 + 8007978: 4607 mov r7, r0 + 800797a: 460c mov r4, r1 + 800797c: b10a cbz r2, 8007982 <_printf_common+0x26> + 800797e: 3301 adds r3, #1 + 8007980: 6033 str r3, [r6, #0] + 8007982: 6823 ldr r3, [r4, #0] + 8007984: 0699 lsls r1, r3, #26 + 8007986: bf42 ittt mi + 8007988: 6833 ldrmi r3, [r6, #0] + 800798a: 3302 addmi r3, #2 + 800798c: 6033 strmi r3, [r6, #0] + 800798e: 6825 ldr r5, [r4, #0] + 8007990: f015 0506 ands.w r5, r5, #6 + 8007994: d106 bne.n 80079a4 <_printf_common+0x48> + 8007996: f104 0a19 add.w sl, r4, #25 + 800799a: 68e3 ldr r3, [r4, #12] + 800799c: 6832 ldr r2, [r6, #0] + 800799e: 1a9b subs r3, r3, r2 + 80079a0: 42ab cmp r3, r5 + 80079a2: dc26 bgt.n 80079f2 <_printf_common+0x96> + 80079a4: f894 3043 ldrb.w r3, [r4, #67] @ 0x43 + 80079a8: 6822 ldr r2, [r4, #0] + 80079aa: 3b00 subs r3, #0 + 80079ac: bf18 it ne + 80079ae: 2301 movne r3, #1 + 80079b0: 0692 lsls r2, r2, #26 + 80079b2: d42b bmi.n 8007a0c <_printf_common+0xb0> + 80079b4: f104 0243 add.w r2, r4, #67 @ 0x43 + 80079b8: 4641 mov r1, r8 + 80079ba: 4638 mov r0, r7 + 80079bc: 47c8 blx r9 + 80079be: 3001 adds r0, #1 + 80079c0: d01e beq.n 8007a00 <_printf_common+0xa4> + 80079c2: 6823 ldr r3, [r4, #0] + 80079c4: 6922 ldr r2, [r4, #16] + 80079c6: f003 0306 and.w r3, r3, #6 + 80079ca: 2b04 cmp r3, #4 + 80079cc: bf02 ittt eq + 80079ce: 68e5 ldreq r5, [r4, #12] + 80079d0: 6833 ldreq r3, [r6, #0] + 80079d2: 1aed subeq r5, r5, r3 + 80079d4: 68a3 ldr r3, [r4, #8] + 80079d6: bf0c ite eq + 80079d8: ea25 75e5 biceq.w r5, r5, r5, asr #31 + 80079dc: 2500 movne r5, #0 + 80079de: 4293 cmp r3, r2 + 80079e0: bfc4 itt gt + 80079e2: 1a9b subgt r3, r3, r2 + 80079e4: 18ed addgt r5, r5, r3 + 80079e6: 2600 movs r6, #0 + 80079e8: 341a adds r4, #26 + 80079ea: 42b5 cmp r5, r6 + 80079ec: d11a bne.n 8007a24 <_printf_common+0xc8> + 80079ee: 2000 movs r0, #0 + 80079f0: e008 b.n 8007a04 <_printf_common+0xa8> + 80079f2: 2301 movs r3, #1 + 80079f4: 4652 mov r2, sl + 80079f6: 4641 mov r1, r8 + 80079f8: 4638 mov r0, r7 + 80079fa: 47c8 blx r9 + 80079fc: 3001 adds r0, #1 + 80079fe: d103 bne.n 8007a08 <_printf_common+0xac> + 8007a00: f04f 30ff mov.w r0, #4294967295 + 8007a04: e8bd 87f0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, pc} + 8007a08: 3501 adds r5, #1 + 8007a0a: e7c6 b.n 800799a <_printf_common+0x3e> + 8007a0c: 18e1 adds r1, r4, r3 + 8007a0e: 1c5a adds r2, r3, #1 + 8007a10: 2030 movs r0, #48 @ 0x30 + 8007a12: f881 0043 strb.w r0, [r1, #67] @ 0x43 + 8007a16: 4422 add r2, r4 + 8007a18: f894 1045 ldrb.w r1, [r4, #69] @ 0x45 + 8007a1c: f882 1043 strb.w r1, [r2, #67] @ 0x43 + 8007a20: 3302 adds r3, #2 + 8007a22: e7c7 b.n 80079b4 <_printf_common+0x58> + 8007a24: 2301 movs r3, #1 + 8007a26: 4622 mov r2, r4 + 8007a28: 4641 mov r1, r8 + 8007a2a: 4638 mov r0, r7 + 8007a2c: 47c8 blx r9 + 8007a2e: 3001 adds r0, #1 + 8007a30: d0e6 beq.n 8007a00 <_printf_common+0xa4> + 8007a32: 3601 adds r6, #1 + 8007a34: e7d9 b.n 80079ea <_printf_common+0x8e> + ... + +08007a38 <_printf_i>: + 8007a38: e92d 47ff stmdb sp!, {r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, sl, lr} + 8007a3c: 7e0f ldrb r7, [r1, #24] + 8007a3e: 9e0c ldr r6, [sp, #48] @ 0x30 + 8007a40: 2f78 cmp r7, #120 @ 0x78 + 8007a42: 4691 mov r9, r2 + 8007a44: 4680 mov r8, r0 + 8007a46: 460c mov r4, r1 + 8007a48: 469a mov sl, r3 + 8007a4a: f101 0243 add.w r2, r1, #67 @ 0x43 + 8007a4e: d807 bhi.n 8007a60 <_printf_i+0x28> + 8007a50: 2f62 cmp r7, #98 @ 0x62 + 8007a52: d80a bhi.n 8007a6a <_printf_i+0x32> + 8007a54: 2f00 cmp r7, #0 + 8007a56: f000 80d1 beq.w 8007bfc <_printf_i+0x1c4> + 8007a5a: 2f58 cmp r7, #88 @ 0x58 + 8007a5c: f000 80b8 beq.w 8007bd0 <_printf_i+0x198> + 8007a60: f104 0642 add.w r6, r4, #66 @ 0x42 + 8007a64: f884 7042 strb.w r7, [r4, #66] @ 0x42 + 8007a68: e03a b.n 8007ae0 <_printf_i+0xa8> + 8007a6a: f1a7 0363 sub.w r3, r7, #99 @ 0x63 + 8007a6e: 2b15 cmp r3, #21 + 8007a70: d8f6 bhi.n 8007a60 <_printf_i+0x28> + 8007a72: a101 add r1, pc, #4 @ (adr r1, 8007a78 <_printf_i+0x40>) + 8007a74: f851 f023 ldr.w pc, [r1, r3, lsl #2] + 8007a78: 08007ad1 .word 0x08007ad1 + 8007a7c: 08007ae5 .word 0x08007ae5 + 8007a80: 08007a61 .word 0x08007a61 + 8007a84: 08007a61 .word 0x08007a61 + 8007a88: 08007a61 .word 0x08007a61 + 8007a8c: 08007a61 .word 0x08007a61 + 8007a90: 08007ae5 .word 0x08007ae5 + 8007a94: 08007a61 .word 0x08007a61 + 8007a98: 08007a61 .word 0x08007a61 + 8007a9c: 08007a61 .word 0x08007a61 + 8007aa0: 08007a61 .word 0x08007a61 + 8007aa4: 08007be3 .word 0x08007be3 + 8007aa8: 08007b0f .word 0x08007b0f + 8007aac: 08007b9d .word 0x08007b9d + 8007ab0: 08007a61 .word 0x08007a61 + 8007ab4: 08007a61 .word 0x08007a61 + 8007ab8: 08007c05 .word 0x08007c05 + 8007abc: 08007a61 .word 0x08007a61 + 8007ac0: 08007b0f .word 0x08007b0f + 8007ac4: 08007a61 .word 0x08007a61 + 8007ac8: 08007a61 .word 0x08007a61 + 8007acc: 08007ba5 .word 0x08007ba5 + 8007ad0: 6833 ldr r3, [r6, #0] + 8007ad2: 1d1a adds r2, r3, #4 + 8007ad4: 681b ldr r3, [r3, #0] + 8007ad6: 6032 str r2, [r6, #0] + 8007ad8: f104 0642 add.w r6, r4, #66 @ 0x42 + 8007adc: f884 3042 strb.w r3, [r4, #66] @ 0x42 + 8007ae0: 2301 movs r3, #1 + 8007ae2: e09c b.n 8007c1e <_printf_i+0x1e6> + 8007ae4: 6833 ldr r3, [r6, #0] + 8007ae6: 6820 ldr r0, [r4, #0] + 8007ae8: 1d19 adds r1, r3, #4 + 8007aea: 6031 str r1, [r6, #0] + 8007aec: 0606 lsls r6, r0, #24 + 8007aee: d501 bpl.n 8007af4 <_printf_i+0xbc> + 8007af0: 681d ldr r5, [r3, #0] + 8007af2: e003 b.n 8007afc <_printf_i+0xc4> + 8007af4: 0645 lsls r5, r0, #25 + 8007af6: d5fb bpl.n 8007af0 <_printf_i+0xb8> + 8007af8: f9b3 5000 ldrsh.w r5, [r3] + 8007afc: 2d00 cmp r5, #0 + 8007afe: da03 bge.n 8007b08 <_printf_i+0xd0> + 8007b00: 232d movs r3, #45 @ 0x2d + 8007b02: 426d negs r5, r5 + 8007b04: f884 3043 strb.w r3, [r4, #67] @ 0x43 + 8007b08: 4858 ldr r0, [pc, #352] @ (8007c6c <_printf_i+0x234>) + 8007b0a: 230a movs r3, #10 + 8007b0c: e011 b.n 8007b32 <_printf_i+0xfa> + 8007b0e: 6821 ldr r1, [r4, #0] + 8007b10: 6833 ldr r3, [r6, #0] + 8007b12: 0608 lsls r0, r1, #24 + 8007b14: f853 5b04 ldr.w r5, [r3], #4 + 8007b18: d402 bmi.n 8007b20 <_printf_i+0xe8> + 8007b1a: 0649 lsls r1, r1, #25 + 8007b1c: bf48 it mi + 8007b1e: b2ad uxthmi r5, r5 + 8007b20: 2f6f cmp r7, #111 @ 0x6f + 8007b22: 4852 ldr r0, [pc, #328] @ (8007c6c <_printf_i+0x234>) + 8007b24: 6033 str r3, [r6, #0] + 8007b26: bf14 ite ne + 8007b28: 230a movne r3, #10 + 8007b2a: 2308 moveq r3, #8 + 8007b2c: 2100 movs r1, #0 + 8007b2e: f884 1043 strb.w r1, [r4, #67] @ 0x43 + 8007b32: 6866 ldr r6, [r4, #4] + 8007b34: 60a6 str r6, [r4, #8] + 8007b36: 2e00 cmp r6, #0 + 8007b38: db05 blt.n 8007b46 <_printf_i+0x10e> + 8007b3a: 6821 ldr r1, [r4, #0] + 8007b3c: 432e orrs r6, r5 + 8007b3e: f021 0104 bic.w r1, r1, #4 + 8007b42: 6021 str r1, [r4, #0] + 8007b44: d04b beq.n 8007bde <_printf_i+0x1a6> + 8007b46: 4616 mov r6, r2 + 8007b48: fbb5 f1f3 udiv r1, r5, r3 + 8007b4c: fb03 5711 mls r7, r3, r1, r5 + 8007b50: 5dc7 ldrb r7, [r0, r7] + 8007b52: f806 7d01 strb.w r7, [r6, #-1]! + 8007b56: 462f mov r7, r5 + 8007b58: 42bb cmp r3, r7 + 8007b5a: 460d mov r5, r1 + 8007b5c: d9f4 bls.n 8007b48 <_printf_i+0x110> + 8007b5e: 2b08 cmp r3, #8 + 8007b60: d10b bne.n 8007b7a <_printf_i+0x142> + 8007b62: 6823 ldr r3, [r4, #0] + 8007b64: 07df lsls r7, r3, #31 + 8007b66: d508 bpl.n 8007b7a <_printf_i+0x142> + 8007b68: 6923 ldr r3, [r4, #16] + 8007b6a: 6861 ldr r1, [r4, #4] + 8007b6c: 4299 cmp r1, r3 + 8007b6e: bfde ittt le + 8007b70: 2330 movle r3, #48 @ 0x30 + 8007b72: f806 3c01 strble.w r3, [r6, #-1] + 8007b76: f106 36ff addle.w r6, r6, #4294967295 + 8007b7a: 1b92 subs r2, r2, r6 + 8007b7c: 6122 str r2, [r4, #16] + 8007b7e: f8cd a000 str.w sl, [sp] + 8007b82: 464b mov r3, r9 + 8007b84: aa03 add r2, sp, #12 + 8007b86: 4621 mov r1, r4 + 8007b88: 4640 mov r0, r8 + 8007b8a: f7ff fee7 bl 800795c <_printf_common> + 8007b8e: 3001 adds r0, #1 + 8007b90: d14a bne.n 8007c28 <_printf_i+0x1f0> + 8007b92: f04f 30ff mov.w r0, #4294967295 + 8007b96: b004 add sp, #16 + 8007b98: e8bd 87f0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, pc} + 8007b9c: 6823 ldr r3, [r4, #0] + 8007b9e: f043 0320 orr.w r3, r3, #32 + 8007ba2: 6023 str r3, [r4, #0] + 8007ba4: 4832 ldr r0, [pc, #200] @ (8007c70 <_printf_i+0x238>) + 8007ba6: 2778 movs r7, #120 @ 0x78 + 8007ba8: f884 7045 strb.w r7, [r4, #69] @ 0x45 + 8007bac: 6823 ldr r3, [r4, #0] + 8007bae: 6831 ldr r1, [r6, #0] + 8007bb0: 061f lsls r7, r3, #24 + 8007bb2: f851 5b04 ldr.w r5, [r1], #4 + 8007bb6: d402 bmi.n 8007bbe <_printf_i+0x186> + 8007bb8: 065f lsls r7, r3, #25 + 8007bba: bf48 it mi + 8007bbc: b2ad uxthmi r5, r5 + 8007bbe: 6031 str r1, [r6, #0] + 8007bc0: 07d9 lsls r1, r3, #31 + 8007bc2: bf44 itt mi + 8007bc4: f043 0320 orrmi.w r3, r3, #32 + 8007bc8: 6023 strmi r3, [r4, #0] + 8007bca: b11d cbz r5, 8007bd4 <_printf_i+0x19c> + 8007bcc: 2310 movs r3, #16 + 8007bce: e7ad b.n 8007b2c <_printf_i+0xf4> + 8007bd0: 4826 ldr r0, [pc, #152] @ (8007c6c <_printf_i+0x234>) + 8007bd2: e7e9 b.n 8007ba8 <_printf_i+0x170> + 8007bd4: 6823 ldr r3, [r4, #0] + 8007bd6: f023 0320 bic.w r3, r3, #32 + 8007bda: 6023 str r3, [r4, #0] + 8007bdc: e7f6 b.n 8007bcc <_printf_i+0x194> + 8007bde: 4616 mov r6, r2 + 8007be0: e7bd b.n 8007b5e <_printf_i+0x126> + 8007be2: 6833 ldr r3, [r6, #0] + 8007be4: 6825 ldr r5, [r4, #0] + 8007be6: 6961 ldr r1, [r4, #20] + 8007be8: 1d18 adds r0, r3, #4 + 8007bea: 6030 str r0, [r6, #0] + 8007bec: 062e lsls r6, r5, #24 + 8007bee: 681b ldr r3, [r3, #0] + 8007bf0: d501 bpl.n 8007bf6 <_printf_i+0x1be> + 8007bf2: 6019 str r1, [r3, #0] + 8007bf4: e002 b.n 8007bfc <_printf_i+0x1c4> + 8007bf6: 0668 lsls r0, r5, #25 + 8007bf8: d5fb bpl.n 8007bf2 <_printf_i+0x1ba> + 8007bfa: 8019 strh r1, [r3, #0] + 8007bfc: 2300 movs r3, #0 + 8007bfe: 6123 str r3, [r4, #16] + 8007c00: 4616 mov r6, r2 + 8007c02: e7bc b.n 8007b7e <_printf_i+0x146> + 8007c04: 6833 ldr r3, [r6, #0] + 8007c06: 1d1a adds r2, r3, #4 + 8007c08: 6032 str r2, [r6, #0] + 8007c0a: 681e ldr r6, [r3, #0] + 8007c0c: 6862 ldr r2, [r4, #4] + 8007c0e: 2100 movs r1, #0 + 8007c10: 4630 mov r0, r6 + 8007c12: f7f8 fae5 bl 80001e0 + 8007c16: b108 cbz r0, 8007c1c <_printf_i+0x1e4> + 8007c18: 1b80 subs r0, r0, r6 + 8007c1a: 6060 str r0, [r4, #4] + 8007c1c: 6863 ldr r3, [r4, #4] + 8007c1e: 6123 str r3, [r4, #16] + 8007c20: 2300 movs r3, #0 + 8007c22: f884 3043 strb.w r3, [r4, #67] @ 0x43 + 8007c26: e7aa b.n 8007b7e <_printf_i+0x146> + 8007c28: 6923 ldr r3, [r4, #16] + 8007c2a: 4632 mov r2, r6 + 8007c2c: 4649 mov r1, r9 + 8007c2e: 4640 mov r0, r8 + 8007c30: 47d0 blx sl + 8007c32: 3001 adds r0, #1 + 8007c34: d0ad beq.n 8007b92 <_printf_i+0x15a> + 8007c36: 6823 ldr r3, [r4, #0] + 8007c38: 079b lsls r3, r3, #30 + 8007c3a: d413 bmi.n 8007c64 <_printf_i+0x22c> + 8007c3c: 68e0 ldr r0, [r4, #12] + 8007c3e: 9b03 ldr r3, [sp, #12] + 8007c40: 4298 cmp r0, r3 + 8007c42: bfb8 it lt + 8007c44: 4618 movlt r0, r3 + 8007c46: e7a6 b.n 8007b96 <_printf_i+0x15e> + 8007c48: 2301 movs r3, #1 + 8007c4a: 4632 mov r2, r6 + 8007c4c: 4649 mov r1, r9 + 8007c4e: 4640 mov r0, r8 + 8007c50: 47d0 blx sl + 8007c52: 3001 adds r0, #1 + 8007c54: d09d beq.n 8007b92 <_printf_i+0x15a> + 8007c56: 3501 adds r5, #1 + 8007c58: 68e3 ldr r3, [r4, #12] + 8007c5a: 9903 ldr r1, [sp, #12] + 8007c5c: 1a5b subs r3, r3, r1 + 8007c5e: 42ab cmp r3, r5 + 8007c60: dcf2 bgt.n 8007c48 <_printf_i+0x210> + 8007c62: e7eb b.n 8007c3c <_printf_i+0x204> + 8007c64: 2500 movs r5, #0 + 8007c66: f104 0619 add.w r6, r4, #25 + 8007c6a: e7f5 b.n 8007c58 <_printf_i+0x220> + 8007c6c: 0800b94e .word 0x0800b94e + 8007c70: 0800b95f .word 0x0800b95f + +08007c74 : + 8007c74: 2300 movs r3, #0 + 8007c76: b510 push {r4, lr} + 8007c78: 4604 mov r4, r0 + 8007c7a: e9c0 3300 strd r3, r3, [r0] + 8007c7e: e9c0 3304 strd r3, r3, [r0, #16] + 8007c82: 6083 str r3, [r0, #8] + 8007c84: 8181 strh r1, [r0, #12] + 8007c86: 6643 str r3, [r0, #100] @ 0x64 + 8007c88: 81c2 strh r2, [r0, #14] + 8007c8a: 6183 str r3, [r0, #24] + 8007c8c: 4619 mov r1, r3 + 8007c8e: 2208 movs r2, #8 + 8007c90: 305c adds r0, #92 @ 0x5c + 8007c92: f000 f93c bl 8007f0e + 8007c96: 4b0d ldr r3, [pc, #52] @ (8007ccc ) + 8007c98: 6263 str r3, [r4, #36] @ 0x24 + 8007c9a: 4b0d ldr r3, [pc, #52] @ (8007cd0 ) + 8007c9c: 62a3 str r3, [r4, #40] @ 0x28 + 8007c9e: 4b0d ldr r3, [pc, #52] @ (8007cd4 ) + 8007ca0: 62e3 str r3, [r4, #44] @ 0x2c + 8007ca2: 4b0d ldr r3, [pc, #52] @ (8007cd8 ) + 8007ca4: 6323 str r3, [r4, #48] @ 0x30 + 8007ca6: 4b0d ldr r3, [pc, #52] @ (8007cdc ) + 8007ca8: 6224 str r4, [r4, #32] + 8007caa: 429c cmp r4, r3 + 8007cac: d006 beq.n 8007cbc + 8007cae: f103 0268 add.w r2, r3, #104 @ 0x68 + 8007cb2: 4294 cmp r4, r2 + 8007cb4: d002 beq.n 8007cbc + 8007cb6: 33d0 adds r3, #208 @ 0xd0 + 8007cb8: 429c cmp r4, r3 + 8007cba: d105 bne.n 8007cc8 + 8007cbc: f104 0058 add.w r0, r4, #88 @ 0x58 + 8007cc0: e8bd 4010 ldmia.w sp!, {r4, lr} + 8007cc4: f000 b9a0 b.w 8008008 <__retarget_lock_init_recursive> + 8007cc8: bd10 pop {r4, pc} + 8007cca: bf00 nop + 8007ccc: 08007e89 .word 0x08007e89 + 8007cd0: 08007eab .word 0x08007eab + 8007cd4: 08007ee3 .word 0x08007ee3 + 8007cd8: 08007f07 .word 0x08007f07 + 8007cdc: 200003a4 .word 0x200003a4 + +08007ce0 : + 8007ce0: 4a02 ldr r2, [pc, #8] @ (8007cec ) + 8007ce2: 4903 ldr r1, [pc, #12] @ (8007cf0 ) + 8007ce4: 4803 ldr r0, [pc, #12] @ (8007cf4 ) + 8007ce6: f000 b869 b.w 8007dbc <_fwalk_sglue> + 8007cea: bf00 nop + 8007cec: 2000000c .word 0x2000000c + 8007cf0: 08009bf1 .word 0x08009bf1 + 8007cf4: 2000001c .word 0x2000001c + +08007cf8 : + 8007cf8: 6841 ldr r1, [r0, #4] + 8007cfa: 4b0c ldr r3, [pc, #48] @ (8007d2c ) + 8007cfc: 4299 cmp r1, r3 + 8007cfe: b510 push {r4, lr} + 8007d00: 4604 mov r4, r0 + 8007d02: d001 beq.n 8007d08 + 8007d04: f001 ff74 bl 8009bf0 <_fflush_r> + 8007d08: 68a1 ldr r1, [r4, #8] + 8007d0a: 4b09 ldr r3, [pc, #36] @ (8007d30 ) + 8007d0c: 4299 cmp r1, r3 + 8007d0e: d002 beq.n 8007d16 + 8007d10: 4620 mov r0, r4 + 8007d12: f001 ff6d bl 8009bf0 <_fflush_r> + 8007d16: 68e1 ldr r1, [r4, #12] + 8007d18: 4b06 ldr r3, [pc, #24] @ (8007d34 ) + 8007d1a: 4299 cmp r1, r3 + 8007d1c: d004 beq.n 8007d28 + 8007d1e: 4620 mov r0, r4 + 8007d20: e8bd 4010 ldmia.w sp!, {r4, lr} + 8007d24: f001 bf64 b.w 8009bf0 <_fflush_r> + 8007d28: bd10 pop {r4, pc} + 8007d2a: bf00 nop + 8007d2c: 200003a4 .word 0x200003a4 + 8007d30: 2000040c .word 0x2000040c + 8007d34: 20000474 .word 0x20000474 + +08007d38 : + 8007d38: b510 push {r4, lr} + 8007d3a: 4b0b ldr r3, [pc, #44] @ (8007d68 ) + 8007d3c: 4c0b ldr r4, [pc, #44] @ (8007d6c ) + 8007d3e: 4a0c ldr r2, [pc, #48] @ (8007d70 ) + 8007d40: 601a str r2, [r3, #0] + 8007d42: 4620 mov r0, r4 + 8007d44: 2200 movs r2, #0 + 8007d46: 2104 movs r1, #4 + 8007d48: f7ff ff94 bl 8007c74 + 8007d4c: f104 0068 add.w r0, r4, #104 @ 0x68 + 8007d50: 2201 movs r2, #1 + 8007d52: 2109 movs r1, #9 + 8007d54: f7ff ff8e bl 8007c74 + 8007d58: f104 00d0 add.w r0, r4, #208 @ 0xd0 + 8007d5c: 2202 movs r2, #2 + 8007d5e: e8bd 4010 ldmia.w sp!, {r4, lr} + 8007d62: 2112 movs r1, #18 + 8007d64: f7ff bf86 b.w 8007c74 + 8007d68: 200004dc .word 0x200004dc + 8007d6c: 200003a4 .word 0x200003a4 + 8007d70: 08007ce1 .word 0x08007ce1 + +08007d74 <__sfp_lock_acquire>: + 8007d74: 4801 ldr r0, [pc, #4] @ (8007d7c <__sfp_lock_acquire+0x8>) + 8007d76: f000 b948 b.w 800800a <__retarget_lock_acquire_recursive> + 8007d7a: bf00 nop + 8007d7c: 200004e5 .word 0x200004e5 + +08007d80 <__sfp_lock_release>: + 8007d80: 4801 ldr r0, [pc, #4] @ (8007d88 <__sfp_lock_release+0x8>) + 8007d82: f000 b943 b.w 800800c <__retarget_lock_release_recursive> + 8007d86: bf00 nop + 8007d88: 200004e5 .word 0x200004e5 + +08007d8c <__sinit>: + 8007d8c: b510 push {r4, lr} + 8007d8e: 4604 mov r4, r0 + 8007d90: f7ff fff0 bl 8007d74 <__sfp_lock_acquire> + 8007d94: 6a23 ldr r3, [r4, #32] + 8007d96: b11b cbz r3, 8007da0 <__sinit+0x14> + 8007d98: e8bd 4010 ldmia.w sp!, {r4, lr} + 8007d9c: f7ff bff0 b.w 8007d80 <__sfp_lock_release> + 8007da0: 4b04 ldr r3, [pc, #16] @ (8007db4 <__sinit+0x28>) + 8007da2: 6223 str r3, [r4, #32] + 8007da4: 4b04 ldr r3, [pc, #16] @ (8007db8 <__sinit+0x2c>) + 8007da6: 681b ldr r3, [r3, #0] + 8007da8: 2b00 cmp r3, #0 + 8007daa: d1f5 bne.n 8007d98 <__sinit+0xc> + 8007dac: f7ff ffc4 bl 8007d38 + 8007db0: e7f2 b.n 8007d98 <__sinit+0xc> + 8007db2: bf00 nop + 8007db4: 08007cf9 .word 0x08007cf9 + 8007db8: 200004dc .word 0x200004dc + +08007dbc <_fwalk_sglue>: + 8007dbc: e92d 43f8 stmdb sp!, {r3, r4, r5, r6, r7, r8, r9, lr} + 8007dc0: 4607 mov r7, r0 + 8007dc2: 4688 mov r8, r1 + 8007dc4: 4614 mov r4, r2 + 8007dc6: 2600 movs r6, #0 + 8007dc8: e9d4 9501 ldrd r9, r5, [r4, #4] + 8007dcc: f1b9 0901 subs.w r9, r9, #1 + 8007dd0: d505 bpl.n 8007dde <_fwalk_sglue+0x22> + 8007dd2: 6824 ldr r4, [r4, #0] + 8007dd4: 2c00 cmp r4, #0 + 8007dd6: d1f7 bne.n 8007dc8 <_fwalk_sglue+0xc> + 8007dd8: 4630 mov r0, r6 + 8007dda: e8bd 83f8 ldmia.w sp!, {r3, r4, r5, r6, r7, r8, r9, pc} + 8007dde: 89ab ldrh r3, [r5, #12] + 8007de0: 2b01 cmp r3, #1 + 8007de2: d907 bls.n 8007df4 <_fwalk_sglue+0x38> + 8007de4: f9b5 300e ldrsh.w r3, [r5, #14] + 8007de8: 3301 adds r3, #1 + 8007dea: d003 beq.n 8007df4 <_fwalk_sglue+0x38> + 8007dec: 4629 mov r1, r5 + 8007dee: 4638 mov r0, r7 + 8007df0: 47c0 blx r8 + 8007df2: 4306 orrs r6, r0 + 8007df4: 3568 adds r5, #104 @ 0x68 + 8007df6: e7e9 b.n 8007dcc <_fwalk_sglue+0x10> + +08007df8 : + 8007df8: b40f push {r0, r1, r2, r3} + 8007dfa: b507 push {r0, r1, r2, lr} + 8007dfc: 4906 ldr r1, [pc, #24] @ (8007e18 ) + 8007dfe: ab04 add r3, sp, #16 + 8007e00: 6808 ldr r0, [r1, #0] + 8007e02: f853 2b04 ldr.w r2, [r3], #4 + 8007e06: 6881 ldr r1, [r0, #8] + 8007e08: 9301 str r3, [sp, #4] + 8007e0a: f001 fd55 bl 80098b8 <_vfiprintf_r> + 8007e0e: b003 add sp, #12 + 8007e10: f85d eb04 ldr.w lr, [sp], #4 + 8007e14: b004 add sp, #16 + 8007e16: 4770 bx lr + 8007e18: 20000018 .word 0x20000018 + +08007e1c : + 8007e1c: b40c push {r2, r3} + 8007e1e: b530 push {r4, r5, lr} + 8007e20: 4b18 ldr r3, [pc, #96] @ (8007e84 ) + 8007e22: 1e0c subs r4, r1, #0 + 8007e24: 681d ldr r5, [r3, #0] + 8007e26: b09d sub sp, #116 @ 0x74 + 8007e28: da08 bge.n 8007e3c + 8007e2a: 238b movs r3, #139 @ 0x8b + 8007e2c: 602b str r3, [r5, #0] + 8007e2e: f04f 30ff mov.w r0, #4294967295 + 8007e32: b01d add sp, #116 @ 0x74 + 8007e34: e8bd 4030 ldmia.w sp!, {r4, r5, lr} + 8007e38: b002 add sp, #8 + 8007e3a: 4770 bx lr + 8007e3c: f44f 7302 mov.w r3, #520 @ 0x208 + 8007e40: f8ad 3014 strh.w r3, [sp, #20] + 8007e44: f04f 0300 mov.w r3, #0 + 8007e48: 931b str r3, [sp, #108] @ 0x6c + 8007e4a: bf14 ite ne + 8007e4c: f104 33ff addne.w r3, r4, #4294967295 + 8007e50: 4623 moveq r3, r4 + 8007e52: 9304 str r3, [sp, #16] + 8007e54: 9307 str r3, [sp, #28] + 8007e56: f64f 73ff movw r3, #65535 @ 0xffff + 8007e5a: 9002 str r0, [sp, #8] + 8007e5c: 9006 str r0, [sp, #24] + 8007e5e: f8ad 3016 strh.w r3, [sp, #22] + 8007e62: 9a20 ldr r2, [sp, #128] @ 0x80 + 8007e64: ab21 add r3, sp, #132 @ 0x84 + 8007e66: a902 add r1, sp, #8 + 8007e68: 4628 mov r0, r5 + 8007e6a: 9301 str r3, [sp, #4] + 8007e6c: f001 fbfe bl 800966c <_svfiprintf_r> + 8007e70: 1c43 adds r3, r0, #1 + 8007e72: bfbc itt lt + 8007e74: 238b movlt r3, #139 @ 0x8b + 8007e76: 602b strlt r3, [r5, #0] + 8007e78: 2c00 cmp r4, #0 + 8007e7a: d0da beq.n 8007e32 + 8007e7c: 9b02 ldr r3, [sp, #8] + 8007e7e: 2200 movs r2, #0 + 8007e80: 701a strb r2, [r3, #0] + 8007e82: e7d6 b.n 8007e32 + 8007e84: 20000018 .word 0x20000018 + +08007e88 <__sread>: + 8007e88: b510 push {r4, lr} + 8007e8a: 460c mov r4, r1 + 8007e8c: f9b1 100e ldrsh.w r1, [r1, #14] + 8007e90: f000 f86c bl 8007f6c <_read_r> + 8007e94: 2800 cmp r0, #0 + 8007e96: bfab itete ge + 8007e98: 6d63 ldrge r3, [r4, #84] @ 0x54 + 8007e9a: 89a3 ldrhlt r3, [r4, #12] + 8007e9c: 181b addge r3, r3, r0 + 8007e9e: f423 5380 biclt.w r3, r3, #4096 @ 0x1000 + 8007ea2: bfac ite ge + 8007ea4: 6563 strge r3, [r4, #84] @ 0x54 + 8007ea6: 81a3 strhlt r3, [r4, #12] + 8007ea8: bd10 pop {r4, pc} + +08007eaa <__swrite>: + 8007eaa: e92d 41f0 stmdb sp!, {r4, r5, r6, r7, r8, lr} + 8007eae: 461f mov r7, r3 + 8007eb0: 898b ldrh r3, [r1, #12] + 8007eb2: 05db lsls r3, r3, #23 + 8007eb4: 4605 mov r5, r0 + 8007eb6: 460c mov r4, r1 + 8007eb8: 4616 mov r6, r2 + 8007eba: d505 bpl.n 8007ec8 <__swrite+0x1e> + 8007ebc: f9b1 100e ldrsh.w r1, [r1, #14] + 8007ec0: 2302 movs r3, #2 + 8007ec2: 2200 movs r2, #0 + 8007ec4: f000 f840 bl 8007f48 <_lseek_r> + 8007ec8: 89a3 ldrh r3, [r4, #12] + 8007eca: f9b4 100e ldrsh.w r1, [r4, #14] + 8007ece: f423 5380 bic.w r3, r3, #4096 @ 0x1000 + 8007ed2: 81a3 strh r3, [r4, #12] + 8007ed4: 4632 mov r2, r6 + 8007ed6: 463b mov r3, r7 + 8007ed8: 4628 mov r0, r5 + 8007eda: e8bd 41f0 ldmia.w sp!, {r4, r5, r6, r7, r8, lr} + 8007ede: f000 b857 b.w 8007f90 <_write_r> + +08007ee2 <__sseek>: + 8007ee2: b510 push {r4, lr} + 8007ee4: 460c mov r4, r1 + 8007ee6: f9b1 100e ldrsh.w r1, [r1, #14] + 8007eea: f000 f82d bl 8007f48 <_lseek_r> + 8007eee: 1c43 adds r3, r0, #1 + 8007ef0: 89a3 ldrh r3, [r4, #12] + 8007ef2: bf15 itete ne + 8007ef4: 6560 strne r0, [r4, #84] @ 0x54 + 8007ef6: f423 5380 biceq.w r3, r3, #4096 @ 0x1000 + 8007efa: f443 5380 orrne.w r3, r3, #4096 @ 0x1000 + 8007efe: 81a3 strheq r3, [r4, #12] + 8007f00: bf18 it ne + 8007f02: 81a3 strhne r3, [r4, #12] + 8007f04: bd10 pop {r4, pc} + +08007f06 <__sclose>: + 8007f06: f9b1 100e ldrsh.w r1, [r1, #14] + 8007f0a: f000 b80d b.w 8007f28 <_close_r> + +08007f0e : + 8007f0e: 4402 add r2, r0 + 8007f10: 4603 mov r3, r0 + 8007f12: 4293 cmp r3, r2 + 8007f14: d100 bne.n 8007f18 + 8007f16: 4770 bx lr + 8007f18: f803 1b01 strb.w r1, [r3], #1 + 8007f1c: e7f9 b.n 8007f12 + ... + +08007f20 <_localeconv_r>: + 8007f20: 4800 ldr r0, [pc, #0] @ (8007f24 <_localeconv_r+0x4>) + 8007f22: 4770 bx lr + 8007f24: 20000158 .word 0x20000158 + +08007f28 <_close_r>: + 8007f28: b538 push {r3, r4, r5, lr} + 8007f2a: 4d06 ldr r5, [pc, #24] @ (8007f44 <_close_r+0x1c>) + 8007f2c: 2300 movs r3, #0 + 8007f2e: 4604 mov r4, r0 + 8007f30: 4608 mov r0, r1 + 8007f32: 602b str r3, [r5, #0] + 8007f34: f7fb ffdb bl 8003eee <_close> + 8007f38: 1c43 adds r3, r0, #1 + 8007f3a: d102 bne.n 8007f42 <_close_r+0x1a> + 8007f3c: 682b ldr r3, [r5, #0] + 8007f3e: b103 cbz r3, 8007f42 <_close_r+0x1a> + 8007f40: 6023 str r3, [r4, #0] + 8007f42: bd38 pop {r3, r4, r5, pc} + 8007f44: 200004e0 .word 0x200004e0 + +08007f48 <_lseek_r>: + 8007f48: b538 push {r3, r4, r5, lr} + 8007f4a: 4d07 ldr r5, [pc, #28] @ (8007f68 <_lseek_r+0x20>) + 8007f4c: 4604 mov r4, r0 + 8007f4e: 4608 mov r0, r1 + 8007f50: 4611 mov r1, r2 + 8007f52: 2200 movs r2, #0 + 8007f54: 602a str r2, [r5, #0] + 8007f56: 461a mov r2, r3 + 8007f58: f7fb fff0 bl 8003f3c <_lseek> + 8007f5c: 1c43 adds r3, r0, #1 + 8007f5e: d102 bne.n 8007f66 <_lseek_r+0x1e> + 8007f60: 682b ldr r3, [r5, #0] + 8007f62: b103 cbz r3, 8007f66 <_lseek_r+0x1e> + 8007f64: 6023 str r3, [r4, #0] + 8007f66: bd38 pop {r3, r4, r5, pc} + 8007f68: 200004e0 .word 0x200004e0 + +08007f6c <_read_r>: + 8007f6c: b538 push {r3, r4, r5, lr} + 8007f6e: 4d07 ldr r5, [pc, #28] @ (8007f8c <_read_r+0x20>) + 8007f70: 4604 mov r4, r0 + 8007f72: 4608 mov r0, r1 + 8007f74: 4611 mov r1, r2 + 8007f76: 2200 movs r2, #0 + 8007f78: 602a str r2, [r5, #0] + 8007f7a: 461a mov r2, r3 + 8007f7c: f7fb ff7e bl 8003e7c <_read> + 8007f80: 1c43 adds r3, r0, #1 + 8007f82: d102 bne.n 8007f8a <_read_r+0x1e> + 8007f84: 682b ldr r3, [r5, #0] + 8007f86: b103 cbz r3, 8007f8a <_read_r+0x1e> + 8007f88: 6023 str r3, [r4, #0] + 8007f8a: bd38 pop {r3, r4, r5, pc} + 8007f8c: 200004e0 .word 0x200004e0 + +08007f90 <_write_r>: + 8007f90: b538 push {r3, r4, r5, lr} + 8007f92: 4d07 ldr r5, [pc, #28] @ (8007fb0 <_write_r+0x20>) + 8007f94: 4604 mov r4, r0 + 8007f96: 4608 mov r0, r1 + 8007f98: 4611 mov r1, r2 + 8007f9a: 2200 movs r2, #0 + 8007f9c: 602a str r2, [r5, #0] + 8007f9e: 461a mov r2, r3 + 8007fa0: f7fb ff89 bl 8003eb6 <_write> + 8007fa4: 1c43 adds r3, r0, #1 + 8007fa6: d102 bne.n 8007fae <_write_r+0x1e> + 8007fa8: 682b ldr r3, [r5, #0] + 8007faa: b103 cbz r3, 8007fae <_write_r+0x1e> + 8007fac: 6023 str r3, [r4, #0] + 8007fae: bd38 pop {r3, r4, r5, pc} + 8007fb0: 200004e0 .word 0x200004e0 + +08007fb4 <__errno>: + 8007fb4: 4b01 ldr r3, [pc, #4] @ (8007fbc <__errno+0x8>) + 8007fb6: 6818 ldr r0, [r3, #0] + 8007fb8: 4770 bx lr + 8007fba: bf00 nop + 8007fbc: 20000018 .word 0x20000018 + +08007fc0 <__libc_init_array>: + 8007fc0: b570 push {r4, r5, r6, lr} + 8007fc2: 4d0d ldr r5, [pc, #52] @ (8007ff8 <__libc_init_array+0x38>) + 8007fc4: 4c0d ldr r4, [pc, #52] @ (8007ffc <__libc_init_array+0x3c>) + 8007fc6: 1b64 subs r4, r4, r5 + 8007fc8: 10a4 asrs r4, r4, #2 + 8007fca: 2600 movs r6, #0 + 8007fcc: 42a6 cmp r6, r4 + 8007fce: d109 bne.n 8007fe4 <__libc_init_array+0x24> + 8007fd0: 4d0b ldr r5, [pc, #44] @ (8008000 <__libc_init_array+0x40>) + 8007fd2: 4c0c ldr r4, [pc, #48] @ (8008004 <__libc_init_array+0x44>) + 8007fd4: f003 fb9e bl 800b714 <_init> + 8007fd8: 1b64 subs r4, r4, r5 + 8007fda: 10a4 asrs r4, r4, #2 + 8007fdc: 2600 movs r6, #0 + 8007fde: 42a6 cmp r6, r4 + 8007fe0: d105 bne.n 8007fee <__libc_init_array+0x2e> + 8007fe2: bd70 pop {r4, r5, r6, pc} + 8007fe4: f855 3b04 ldr.w r3, [r5], #4 + 8007fe8: 4798 blx r3 + 8007fea: 3601 adds r6, #1 + 8007fec: e7ee b.n 8007fcc <__libc_init_array+0xc> + 8007fee: f855 3b04 ldr.w r3, [r5], #4 + 8007ff2: 4798 blx r3 + 8007ff4: 3601 adds r6, #1 + 8007ff6: e7f2 b.n 8007fde <__libc_init_array+0x1e> + 8007ff8: 0800c0dc .word 0x0800c0dc + 8007ffc: 0800c0dc .word 0x0800c0dc + 8008000: 0800c0dc .word 0x0800c0dc + 8008004: 0800c0e0 .word 0x0800c0e0 + +08008008 <__retarget_lock_init_recursive>: + 8008008: 4770 bx lr + +0800800a <__retarget_lock_acquire_recursive>: + 800800a: 4770 bx lr + +0800800c <__retarget_lock_release_recursive>: + 800800c: 4770 bx lr + +0800800e : + 800800e: e92d 4ff7 stmdb sp!, {r0, r1, r2, r4, r5, r6, r7, r8, r9, sl, fp, lr} + 8008012: 6903 ldr r3, [r0, #16] + 8008014: 690c ldr r4, [r1, #16] + 8008016: 42a3 cmp r3, r4 + 8008018: 4607 mov r7, r0 + 800801a: db7e blt.n 800811a + 800801c: 3c01 subs r4, #1 + 800801e: f101 0814 add.w r8, r1, #20 + 8008022: 00a3 lsls r3, r4, #2 + 8008024: f100 0514 add.w r5, r0, #20 + 8008028: 9300 str r3, [sp, #0] + 800802a: eb05 0384 add.w r3, r5, r4, lsl #2 + 800802e: 9301 str r3, [sp, #4] + 8008030: f858 3024 ldr.w r3, [r8, r4, lsl #2] + 8008034: f855 2024 ldr.w r2, [r5, r4, lsl #2] + 8008038: 3301 adds r3, #1 + 800803a: 429a cmp r2, r3 + 800803c: eb08 0984 add.w r9, r8, r4, lsl #2 + 8008040: fbb2 f6f3 udiv r6, r2, r3 + 8008044: d32e bcc.n 80080a4 + 8008046: f04f 0a00 mov.w sl, #0 + 800804a: 46c4 mov ip, r8 + 800804c: 46ae mov lr, r5 + 800804e: 46d3 mov fp, sl + 8008050: f85c 3b04 ldr.w r3, [ip], #4 + 8008054: b298 uxth r0, r3 + 8008056: fb06 a000 mla r0, r6, r0, sl + 800805a: 0c02 lsrs r2, r0, #16 + 800805c: 0c1b lsrs r3, r3, #16 + 800805e: fb06 2303 mla r3, r6, r3, r2 + 8008062: f8de 2000 ldr.w r2, [lr] + 8008066: b280 uxth r0, r0 + 8008068: b292 uxth r2, r2 + 800806a: 1a12 subs r2, r2, r0 + 800806c: 445a add r2, fp + 800806e: f8de 0000 ldr.w r0, [lr] + 8008072: ea4f 4a13 mov.w sl, r3, lsr #16 + 8008076: b29b uxth r3, r3 + 8008078: ebc3 4322 rsb r3, r3, r2, asr #16 + 800807c: eb03 4310 add.w r3, r3, r0, lsr #16 + 8008080: b292 uxth r2, r2 + 8008082: ea42 4203 orr.w r2, r2, r3, lsl #16 + 8008086: 45e1 cmp r9, ip + 8008088: f84e 2b04 str.w r2, [lr], #4 + 800808c: ea4f 4b23 mov.w fp, r3, asr #16 + 8008090: d2de bcs.n 8008050 + 8008092: 9b00 ldr r3, [sp, #0] + 8008094: 58eb ldr r3, [r5, r3] + 8008096: b92b cbnz r3, 80080a4 + 8008098: 9b01 ldr r3, [sp, #4] + 800809a: 3b04 subs r3, #4 + 800809c: 429d cmp r5, r3 + 800809e: 461a mov r2, r3 + 80080a0: d32f bcc.n 8008102 + 80080a2: 613c str r4, [r7, #16] + 80080a4: 4638 mov r0, r7 + 80080a6: f001 f97d bl 80093a4 <__mcmp> + 80080aa: 2800 cmp r0, #0 + 80080ac: db25 blt.n 80080fa + 80080ae: 4629 mov r1, r5 + 80080b0: 2000 movs r0, #0 + 80080b2: f858 2b04 ldr.w r2, [r8], #4 + 80080b6: f8d1 c000 ldr.w ip, [r1] + 80080ba: fa1f fe82 uxth.w lr, r2 + 80080be: fa1f f38c uxth.w r3, ip + 80080c2: eba3 030e sub.w r3, r3, lr + 80080c6: 4403 add r3, r0 + 80080c8: 0c12 lsrs r2, r2, #16 + 80080ca: ebc2 4223 rsb r2, r2, r3, asr #16 + 80080ce: eb02 421c add.w r2, r2, ip, lsr #16 + 80080d2: b29b uxth r3, r3 + 80080d4: ea43 4302 orr.w r3, r3, r2, lsl #16 + 80080d8: 45c1 cmp r9, r8 + 80080da: f841 3b04 str.w r3, [r1], #4 + 80080de: ea4f 4022 mov.w r0, r2, asr #16 + 80080e2: d2e6 bcs.n 80080b2 + 80080e4: f855 2024 ldr.w r2, [r5, r4, lsl #2] + 80080e8: eb05 0384 add.w r3, r5, r4, lsl #2 + 80080ec: b922 cbnz r2, 80080f8 + 80080ee: 3b04 subs r3, #4 + 80080f0: 429d cmp r5, r3 + 80080f2: 461a mov r2, r3 + 80080f4: d30b bcc.n 800810e + 80080f6: 613c str r4, [r7, #16] + 80080f8: 3601 adds r6, #1 + 80080fa: 4630 mov r0, r6 + 80080fc: b003 add sp, #12 + 80080fe: e8bd 8ff0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, fp, pc} + 8008102: 6812 ldr r2, [r2, #0] + 8008104: 3b04 subs r3, #4 + 8008106: 2a00 cmp r2, #0 + 8008108: d1cb bne.n 80080a2 + 800810a: 3c01 subs r4, #1 + 800810c: e7c6 b.n 800809c + 800810e: 6812 ldr r2, [r2, #0] + 8008110: 3b04 subs r3, #4 + 8008112: 2a00 cmp r2, #0 + 8008114: d1ef bne.n 80080f6 + 8008116: 3c01 subs r4, #1 + 8008118: e7ea b.n 80080f0 + 800811a: 2000 movs r0, #0 + 800811c: e7ee b.n 80080fc + ... + +08008120 <_dtoa_r>: + 8008120: e92d 4ff0 stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, fp, lr} + 8008124: 69c7 ldr r7, [r0, #28] + 8008126: b097 sub sp, #92 @ 0x5c + 8008128: ed8d 0b04 vstr d0, [sp, #16] + 800812c: ec55 4b10 vmov r4, r5, d0 + 8008130: 9e20 ldr r6, [sp, #128] @ 0x80 + 8008132: 9107 str r1, [sp, #28] + 8008134: 4681 mov r9, r0 + 8008136: 920c str r2, [sp, #48] @ 0x30 + 8008138: 9311 str r3, [sp, #68] @ 0x44 + 800813a: b97f cbnz r7, 800815c <_dtoa_r+0x3c> + 800813c: 2010 movs r0, #16 + 800813e: f000 fe09 bl 8008d54 + 8008142: 4602 mov r2, r0 + 8008144: f8c9 001c str.w r0, [r9, #28] + 8008148: b920 cbnz r0, 8008154 <_dtoa_r+0x34> + 800814a: 4ba9 ldr r3, [pc, #676] @ (80083f0 <_dtoa_r+0x2d0>) + 800814c: 21ef movs r1, #239 @ 0xef + 800814e: 48a9 ldr r0, [pc, #676] @ (80083f4 <_dtoa_r+0x2d4>) + 8008150: f001 fe42 bl 8009dd8 <__assert_func> + 8008154: e9c0 7701 strd r7, r7, [r0, #4] + 8008158: 6007 str r7, [r0, #0] + 800815a: 60c7 str r7, [r0, #12] + 800815c: f8d9 301c ldr.w r3, [r9, #28] + 8008160: 6819 ldr r1, [r3, #0] + 8008162: b159 cbz r1, 800817c <_dtoa_r+0x5c> + 8008164: 685a ldr r2, [r3, #4] + 8008166: 604a str r2, [r1, #4] + 8008168: 2301 movs r3, #1 + 800816a: 4093 lsls r3, r2 + 800816c: 608b str r3, [r1, #8] + 800816e: 4648 mov r0, r9 + 8008170: f000 fee6 bl 8008f40 <_Bfree> + 8008174: f8d9 301c ldr.w r3, [r9, #28] + 8008178: 2200 movs r2, #0 + 800817a: 601a str r2, [r3, #0] + 800817c: 1e2b subs r3, r5, #0 + 800817e: bfb9 ittee lt + 8008180: f023 4300 biclt.w r3, r3, #2147483648 @ 0x80000000 + 8008184: 9305 strlt r3, [sp, #20] + 8008186: 2300 movge r3, #0 + 8008188: 6033 strge r3, [r6, #0] + 800818a: 9f05 ldr r7, [sp, #20] + 800818c: 4b9a ldr r3, [pc, #616] @ (80083f8 <_dtoa_r+0x2d8>) + 800818e: bfbc itt lt + 8008190: 2201 movlt r2, #1 + 8008192: 6032 strlt r2, [r6, #0] + 8008194: 43bb bics r3, r7 + 8008196: d112 bne.n 80081be <_dtoa_r+0x9e> + 8008198: 9a11 ldr r2, [sp, #68] @ 0x44 + 800819a: f242 730f movw r3, #9999 @ 0x270f + 800819e: 6013 str r3, [r2, #0] + 80081a0: f3c7 0313 ubfx r3, r7, #0, #20 + 80081a4: 4323 orrs r3, r4 + 80081a6: f000 855a beq.w 8008c5e <_dtoa_r+0xb3e> + 80081aa: 9b21 ldr r3, [sp, #132] @ 0x84 + 80081ac: f8df a25c ldr.w sl, [pc, #604] @ 800840c <_dtoa_r+0x2ec> + 80081b0: 2b00 cmp r3, #0 + 80081b2: f000 855c beq.w 8008c6e <_dtoa_r+0xb4e> + 80081b6: f10a 0303 add.w r3, sl, #3 + 80081ba: f000 bd56 b.w 8008c6a <_dtoa_r+0xb4a> + 80081be: ed9d 7b04 vldr d7, [sp, #16] + 80081c2: 2200 movs r2, #0 + 80081c4: ec51 0b17 vmov r0, r1, d7 + 80081c8: 2300 movs r3, #0 + 80081ca: ed8d 7b0a vstr d7, [sp, #40] @ 0x28 + 80081ce: f7f8 fc83 bl 8000ad8 <__aeabi_dcmpeq> + 80081d2: 4680 mov r8, r0 + 80081d4: b158 cbz r0, 80081ee <_dtoa_r+0xce> + 80081d6: 9a11 ldr r2, [sp, #68] @ 0x44 + 80081d8: 2301 movs r3, #1 + 80081da: 6013 str r3, [r2, #0] + 80081dc: 9b21 ldr r3, [sp, #132] @ 0x84 + 80081de: b113 cbz r3, 80081e6 <_dtoa_r+0xc6> + 80081e0: 9a21 ldr r2, [sp, #132] @ 0x84 + 80081e2: 4b86 ldr r3, [pc, #536] @ (80083fc <_dtoa_r+0x2dc>) + 80081e4: 6013 str r3, [r2, #0] + 80081e6: f8df a228 ldr.w sl, [pc, #552] @ 8008410 <_dtoa_r+0x2f0> + 80081ea: f000 bd40 b.w 8008c6e <_dtoa_r+0xb4e> + 80081ee: ed9d 0b0a vldr d0, [sp, #40] @ 0x28 + 80081f2: aa14 add r2, sp, #80 @ 0x50 + 80081f4: a915 add r1, sp, #84 @ 0x54 + 80081f6: 4648 mov r0, r9 + 80081f8: f001 f984 bl 8009504 <__d2b> + 80081fc: f3c7 560a ubfx r6, r7, #20, #11 + 8008200: 9002 str r0, [sp, #8] + 8008202: 2e00 cmp r6, #0 + 8008204: d078 beq.n 80082f8 <_dtoa_r+0x1d8> + 8008206: 9b0b ldr r3, [sp, #44] @ 0x2c + 8008208: f8cd 8048 str.w r8, [sp, #72] @ 0x48 + 800820c: f3c3 0313 ubfx r3, r3, #0, #20 + 8008210: e9dd 010a ldrd r0, r1, [sp, #40] @ 0x28 + 8008214: f043 537f orr.w r3, r3, #1069547520 @ 0x3fc00000 + 8008218: f443 1340 orr.w r3, r3, #3145728 @ 0x300000 + 800821c: f2a6 36ff subw r6, r6, #1023 @ 0x3ff + 8008220: 4619 mov r1, r3 + 8008222: 2200 movs r2, #0 + 8008224: 4b76 ldr r3, [pc, #472] @ (8008400 <_dtoa_r+0x2e0>) + 8008226: f7f8 f837 bl 8000298 <__aeabi_dsub> + 800822a: a36b add r3, pc, #428 @ (adr r3, 80083d8 <_dtoa_r+0x2b8>) + 800822c: e9d3 2300 ldrd r2, r3, [r3] + 8008230: f7f8 f9ea bl 8000608 <__aeabi_dmul> + 8008234: a36a add r3, pc, #424 @ (adr r3, 80083e0 <_dtoa_r+0x2c0>) + 8008236: e9d3 2300 ldrd r2, r3, [r3] + 800823a: f7f8 f82f bl 800029c <__adddf3> + 800823e: 4604 mov r4, r0 + 8008240: 4630 mov r0, r6 + 8008242: 460d mov r5, r1 + 8008244: f7f8 f976 bl 8000534 <__aeabi_i2d> + 8008248: a367 add r3, pc, #412 @ (adr r3, 80083e8 <_dtoa_r+0x2c8>) + 800824a: e9d3 2300 ldrd r2, r3, [r3] + 800824e: f7f8 f9db bl 8000608 <__aeabi_dmul> + 8008252: 4602 mov r2, r0 + 8008254: 460b mov r3, r1 + 8008256: 4620 mov r0, r4 + 8008258: 4629 mov r1, r5 + 800825a: f7f8 f81f bl 800029c <__adddf3> + 800825e: 4604 mov r4, r0 + 8008260: 460d mov r5, r1 + 8008262: f7f8 fc81 bl 8000b68 <__aeabi_d2iz> + 8008266: 2200 movs r2, #0 + 8008268: 4607 mov r7, r0 + 800826a: 2300 movs r3, #0 + 800826c: 4620 mov r0, r4 + 800826e: 4629 mov r1, r5 + 8008270: f7f8 fc3c bl 8000aec <__aeabi_dcmplt> + 8008274: b140 cbz r0, 8008288 <_dtoa_r+0x168> + 8008276: 4638 mov r0, r7 + 8008278: f7f8 f95c bl 8000534 <__aeabi_i2d> + 800827c: 4622 mov r2, r4 + 800827e: 462b mov r3, r5 + 8008280: f7f8 fc2a bl 8000ad8 <__aeabi_dcmpeq> + 8008284: b900 cbnz r0, 8008288 <_dtoa_r+0x168> + 8008286: 3f01 subs r7, #1 + 8008288: 2f16 cmp r7, #22 + 800828a: d852 bhi.n 8008332 <_dtoa_r+0x212> + 800828c: 4b5d ldr r3, [pc, #372] @ (8008404 <_dtoa_r+0x2e4>) + 800828e: eb03 03c7 add.w r3, r3, r7, lsl #3 + 8008292: e9d3 2300 ldrd r2, r3, [r3] + 8008296: e9dd 010a ldrd r0, r1, [sp, #40] @ 0x28 + 800829a: f7f8 fc27 bl 8000aec <__aeabi_dcmplt> + 800829e: 2800 cmp r0, #0 + 80082a0: d049 beq.n 8008336 <_dtoa_r+0x216> + 80082a2: 3f01 subs r7, #1 + 80082a4: 2300 movs r3, #0 + 80082a6: 9310 str r3, [sp, #64] @ 0x40 + 80082a8: 9b14 ldr r3, [sp, #80] @ 0x50 + 80082aa: 1b9b subs r3, r3, r6 + 80082ac: 1e5a subs r2, r3, #1 + 80082ae: bf45 ittet mi + 80082b0: f1c3 0301 rsbmi r3, r3, #1 + 80082b4: 9300 strmi r3, [sp, #0] + 80082b6: 2300 movpl r3, #0 + 80082b8: 2300 movmi r3, #0 + 80082ba: 9206 str r2, [sp, #24] + 80082bc: bf54 ite pl + 80082be: 9300 strpl r3, [sp, #0] + 80082c0: 9306 strmi r3, [sp, #24] + 80082c2: 2f00 cmp r7, #0 + 80082c4: db39 blt.n 800833a <_dtoa_r+0x21a> + 80082c6: 9b06 ldr r3, [sp, #24] + 80082c8: 970d str r7, [sp, #52] @ 0x34 + 80082ca: 443b add r3, r7 + 80082cc: 9306 str r3, [sp, #24] + 80082ce: 2300 movs r3, #0 + 80082d0: 9308 str r3, [sp, #32] + 80082d2: 9b07 ldr r3, [sp, #28] + 80082d4: 2b09 cmp r3, #9 + 80082d6: d863 bhi.n 80083a0 <_dtoa_r+0x280> + 80082d8: 2b05 cmp r3, #5 + 80082da: bfc4 itt gt + 80082dc: 3b04 subgt r3, #4 + 80082de: 9307 strgt r3, [sp, #28] + 80082e0: 9b07 ldr r3, [sp, #28] + 80082e2: f1a3 0302 sub.w r3, r3, #2 + 80082e6: bfcc ite gt + 80082e8: 2400 movgt r4, #0 + 80082ea: 2401 movle r4, #1 + 80082ec: 2b03 cmp r3, #3 + 80082ee: d863 bhi.n 80083b8 <_dtoa_r+0x298> + 80082f0: e8df f003 tbb [pc, r3] + 80082f4: 2b375452 .word 0x2b375452 + 80082f8: e9dd 6314 ldrd r6, r3, [sp, #80] @ 0x50 + 80082fc: 441e add r6, r3 + 80082fe: f206 4332 addw r3, r6, #1074 @ 0x432 + 8008302: 2b20 cmp r3, #32 + 8008304: bfc1 itttt gt + 8008306: f1c3 0340 rsbgt r3, r3, #64 @ 0x40 + 800830a: 409f lslgt r7, r3 + 800830c: f206 4312 addwgt r3, r6, #1042 @ 0x412 + 8008310: fa24 f303 lsrgt.w r3, r4, r3 + 8008314: bfd6 itet le + 8008316: f1c3 0320 rsble r3, r3, #32 + 800831a: ea47 0003 orrgt.w r0, r7, r3 + 800831e: fa04 f003 lslle.w r0, r4, r3 + 8008322: f7f8 f8f7 bl 8000514 <__aeabi_ui2d> + 8008326: 2201 movs r2, #1 + 8008328: f1a1 73f8 sub.w r3, r1, #32505856 @ 0x1f00000 + 800832c: 3e01 subs r6, #1 + 800832e: 9212 str r2, [sp, #72] @ 0x48 + 8008330: e776 b.n 8008220 <_dtoa_r+0x100> + 8008332: 2301 movs r3, #1 + 8008334: e7b7 b.n 80082a6 <_dtoa_r+0x186> + 8008336: 9010 str r0, [sp, #64] @ 0x40 + 8008338: e7b6 b.n 80082a8 <_dtoa_r+0x188> + 800833a: 9b00 ldr r3, [sp, #0] + 800833c: 1bdb subs r3, r3, r7 + 800833e: 9300 str r3, [sp, #0] + 8008340: 427b negs r3, r7 + 8008342: 9308 str r3, [sp, #32] + 8008344: 2300 movs r3, #0 + 8008346: 930d str r3, [sp, #52] @ 0x34 + 8008348: e7c3 b.n 80082d2 <_dtoa_r+0x1b2> + 800834a: 2301 movs r3, #1 + 800834c: 9309 str r3, [sp, #36] @ 0x24 + 800834e: 9b0c ldr r3, [sp, #48] @ 0x30 + 8008350: eb07 0b03 add.w fp, r7, r3 + 8008354: f10b 0301 add.w r3, fp, #1 + 8008358: 2b01 cmp r3, #1 + 800835a: 9303 str r3, [sp, #12] + 800835c: bfb8 it lt + 800835e: 2301 movlt r3, #1 + 8008360: e006 b.n 8008370 <_dtoa_r+0x250> + 8008362: 2301 movs r3, #1 + 8008364: 9309 str r3, [sp, #36] @ 0x24 + 8008366: 9b0c ldr r3, [sp, #48] @ 0x30 + 8008368: 2b00 cmp r3, #0 + 800836a: dd28 ble.n 80083be <_dtoa_r+0x29e> + 800836c: 469b mov fp, r3 + 800836e: 9303 str r3, [sp, #12] + 8008370: f8d9 001c ldr.w r0, [r9, #28] + 8008374: 2100 movs r1, #0 + 8008376: 2204 movs r2, #4 + 8008378: f102 0514 add.w r5, r2, #20 + 800837c: 429d cmp r5, r3 + 800837e: d926 bls.n 80083ce <_dtoa_r+0x2ae> + 8008380: 6041 str r1, [r0, #4] + 8008382: 4648 mov r0, r9 + 8008384: f000 fd9c bl 8008ec0 <_Balloc> + 8008388: 4682 mov sl, r0 + 800838a: 2800 cmp r0, #0 + 800838c: d142 bne.n 8008414 <_dtoa_r+0x2f4> + 800838e: 4b1e ldr r3, [pc, #120] @ (8008408 <_dtoa_r+0x2e8>) + 8008390: 4602 mov r2, r0 + 8008392: f240 11af movw r1, #431 @ 0x1af + 8008396: e6da b.n 800814e <_dtoa_r+0x2e> + 8008398: 2300 movs r3, #0 + 800839a: e7e3 b.n 8008364 <_dtoa_r+0x244> + 800839c: 2300 movs r3, #0 + 800839e: e7d5 b.n 800834c <_dtoa_r+0x22c> + 80083a0: 2401 movs r4, #1 + 80083a2: 2300 movs r3, #0 + 80083a4: 9307 str r3, [sp, #28] + 80083a6: 9409 str r4, [sp, #36] @ 0x24 + 80083a8: f04f 3bff mov.w fp, #4294967295 + 80083ac: 2200 movs r2, #0 + 80083ae: f8cd b00c str.w fp, [sp, #12] + 80083b2: 2312 movs r3, #18 + 80083b4: 920c str r2, [sp, #48] @ 0x30 + 80083b6: e7db b.n 8008370 <_dtoa_r+0x250> + 80083b8: 2301 movs r3, #1 + 80083ba: 9309 str r3, [sp, #36] @ 0x24 + 80083bc: e7f4 b.n 80083a8 <_dtoa_r+0x288> + 80083be: f04f 0b01 mov.w fp, #1 + 80083c2: f8cd b00c str.w fp, [sp, #12] + 80083c6: 465b mov r3, fp + 80083c8: f8cd b030 str.w fp, [sp, #48] @ 0x30 + 80083cc: e7d0 b.n 8008370 <_dtoa_r+0x250> + 80083ce: 3101 adds r1, #1 + 80083d0: 0052 lsls r2, r2, #1 + 80083d2: e7d1 b.n 8008378 <_dtoa_r+0x258> + 80083d4: f3af 8000 nop.w + 80083d8: 636f4361 .word 0x636f4361 + 80083dc: 3fd287a7 .word 0x3fd287a7 + 80083e0: 8b60c8b3 .word 0x8b60c8b3 + 80083e4: 3fc68a28 .word 0x3fc68a28 + 80083e8: 509f79fb .word 0x509f79fb + 80083ec: 3fd34413 .word 0x3fd34413 + 80083f0: 0800b97d .word 0x0800b97d + 80083f4: 0800b994 .word 0x0800b994 + 80083f8: 7ff00000 .word 0x7ff00000 + 80083fc: 0800b94d .word 0x0800b94d + 8008400: 3ff80000 .word 0x3ff80000 + 8008404: 0800bae8 .word 0x0800bae8 + 8008408: 0800b9ec .word 0x0800b9ec + 800840c: 0800b979 .word 0x0800b979 + 8008410: 0800b94c .word 0x0800b94c + 8008414: f8d9 301c ldr.w r3, [r9, #28] + 8008418: 6018 str r0, [r3, #0] + 800841a: 9b03 ldr r3, [sp, #12] + 800841c: 2b0e cmp r3, #14 + 800841e: f200 80a1 bhi.w 8008564 <_dtoa_r+0x444> + 8008422: 2c00 cmp r4, #0 + 8008424: f000 809e beq.w 8008564 <_dtoa_r+0x444> + 8008428: 2f00 cmp r7, #0 + 800842a: dd33 ble.n 8008494 <_dtoa_r+0x374> + 800842c: 4b9c ldr r3, [pc, #624] @ (80086a0 <_dtoa_r+0x580>) + 800842e: f007 020f and.w r2, r7, #15 + 8008432: eb03 03c2 add.w r3, r3, r2, lsl #3 + 8008436: ed93 7b00 vldr d7, [r3] + 800843a: 05f8 lsls r0, r7, #23 + 800843c: ed8d 7b0e vstr d7, [sp, #56] @ 0x38 + 8008440: ea4f 1427 mov.w r4, r7, asr #4 + 8008444: d516 bpl.n 8008474 <_dtoa_r+0x354> + 8008446: 4b97 ldr r3, [pc, #604] @ (80086a4 <_dtoa_r+0x584>) + 8008448: e9dd 010a ldrd r0, r1, [sp, #40] @ 0x28 + 800844c: e9d3 2308 ldrd r2, r3, [r3, #32] + 8008450: f7f8 fa04 bl 800085c <__aeabi_ddiv> + 8008454: e9cd 0104 strd r0, r1, [sp, #16] + 8008458: f004 040f and.w r4, r4, #15 + 800845c: 2603 movs r6, #3 + 800845e: 4d91 ldr r5, [pc, #580] @ (80086a4 <_dtoa_r+0x584>) + 8008460: b954 cbnz r4, 8008478 <_dtoa_r+0x358> + 8008462: e9dd 230e ldrd r2, r3, [sp, #56] @ 0x38 + 8008466: e9dd 0104 ldrd r0, r1, [sp, #16] + 800846a: f7f8 f9f7 bl 800085c <__aeabi_ddiv> + 800846e: e9cd 0104 strd r0, r1, [sp, #16] + 8008472: e028 b.n 80084c6 <_dtoa_r+0x3a6> + 8008474: 2602 movs r6, #2 + 8008476: e7f2 b.n 800845e <_dtoa_r+0x33e> + 8008478: 07e1 lsls r1, r4, #31 + 800847a: d508 bpl.n 800848e <_dtoa_r+0x36e> + 800847c: e9dd 010e ldrd r0, r1, [sp, #56] @ 0x38 + 8008480: e9d5 2300 ldrd r2, r3, [r5] + 8008484: f7f8 f8c0 bl 8000608 <__aeabi_dmul> + 8008488: e9cd 010e strd r0, r1, [sp, #56] @ 0x38 + 800848c: 3601 adds r6, #1 + 800848e: 1064 asrs r4, r4, #1 + 8008490: 3508 adds r5, #8 + 8008492: e7e5 b.n 8008460 <_dtoa_r+0x340> + 8008494: f000 80af beq.w 80085f6 <_dtoa_r+0x4d6> + 8008498: 427c negs r4, r7 + 800849a: 4b81 ldr r3, [pc, #516] @ (80086a0 <_dtoa_r+0x580>) + 800849c: 4d81 ldr r5, [pc, #516] @ (80086a4 <_dtoa_r+0x584>) + 800849e: f004 020f and.w r2, r4, #15 + 80084a2: eb03 03c2 add.w r3, r3, r2, lsl #3 + 80084a6: e9d3 2300 ldrd r2, r3, [r3] + 80084aa: e9dd 010a ldrd r0, r1, [sp, #40] @ 0x28 + 80084ae: f7f8 f8ab bl 8000608 <__aeabi_dmul> + 80084b2: e9cd 0104 strd r0, r1, [sp, #16] + 80084b6: 1124 asrs r4, r4, #4 + 80084b8: 2300 movs r3, #0 + 80084ba: 2602 movs r6, #2 + 80084bc: 2c00 cmp r4, #0 + 80084be: f040 808f bne.w 80085e0 <_dtoa_r+0x4c0> + 80084c2: 2b00 cmp r3, #0 + 80084c4: d1d3 bne.n 800846e <_dtoa_r+0x34e> + 80084c6: 9b10 ldr r3, [sp, #64] @ 0x40 + 80084c8: e9dd 4504 ldrd r4, r5, [sp, #16] + 80084cc: 2b00 cmp r3, #0 + 80084ce: f000 8094 beq.w 80085fa <_dtoa_r+0x4da> + 80084d2: 4b75 ldr r3, [pc, #468] @ (80086a8 <_dtoa_r+0x588>) + 80084d4: 2200 movs r2, #0 + 80084d6: 4620 mov r0, r4 + 80084d8: 4629 mov r1, r5 + 80084da: f7f8 fb07 bl 8000aec <__aeabi_dcmplt> + 80084de: 2800 cmp r0, #0 + 80084e0: f000 808b beq.w 80085fa <_dtoa_r+0x4da> + 80084e4: 9b03 ldr r3, [sp, #12] + 80084e6: 2b00 cmp r3, #0 + 80084e8: f000 8087 beq.w 80085fa <_dtoa_r+0x4da> + 80084ec: f1bb 0f00 cmp.w fp, #0 + 80084f0: dd34 ble.n 800855c <_dtoa_r+0x43c> + 80084f2: 4620 mov r0, r4 + 80084f4: 4b6d ldr r3, [pc, #436] @ (80086ac <_dtoa_r+0x58c>) + 80084f6: 2200 movs r2, #0 + 80084f8: 4629 mov r1, r5 + 80084fa: f7f8 f885 bl 8000608 <__aeabi_dmul> + 80084fe: e9cd 0104 strd r0, r1, [sp, #16] + 8008502: f107 38ff add.w r8, r7, #4294967295 + 8008506: 3601 adds r6, #1 + 8008508: 465c mov r4, fp + 800850a: 4630 mov r0, r6 + 800850c: f7f8 f812 bl 8000534 <__aeabi_i2d> + 8008510: e9dd 2304 ldrd r2, r3, [sp, #16] + 8008514: f7f8 f878 bl 8000608 <__aeabi_dmul> + 8008518: 4b65 ldr r3, [pc, #404] @ (80086b0 <_dtoa_r+0x590>) + 800851a: 2200 movs r2, #0 + 800851c: f7f7 febe bl 800029c <__adddf3> + 8008520: 4605 mov r5, r0 + 8008522: f1a1 7650 sub.w r6, r1, #54525952 @ 0x3400000 + 8008526: 2c00 cmp r4, #0 + 8008528: d16a bne.n 8008600 <_dtoa_r+0x4e0> + 800852a: e9dd 0104 ldrd r0, r1, [sp, #16] + 800852e: 4b61 ldr r3, [pc, #388] @ (80086b4 <_dtoa_r+0x594>) + 8008530: 2200 movs r2, #0 + 8008532: f7f7 feb1 bl 8000298 <__aeabi_dsub> + 8008536: 4602 mov r2, r0 + 8008538: 460b mov r3, r1 + 800853a: e9cd 2304 strd r2, r3, [sp, #16] + 800853e: 462a mov r2, r5 + 8008540: 4633 mov r3, r6 + 8008542: f7f8 faf1 bl 8000b28 <__aeabi_dcmpgt> + 8008546: 2800 cmp r0, #0 + 8008548: f040 8298 bne.w 8008a7c <_dtoa_r+0x95c> + 800854c: e9dd 0104 ldrd r0, r1, [sp, #16] + 8008550: 462a mov r2, r5 + 8008552: f106 4300 add.w r3, r6, #2147483648 @ 0x80000000 + 8008556: f7f8 fac9 bl 8000aec <__aeabi_dcmplt> + 800855a: bb38 cbnz r0, 80085ac <_dtoa_r+0x48c> + 800855c: e9dd 340a ldrd r3, r4, [sp, #40] @ 0x28 + 8008560: e9cd 3404 strd r3, r4, [sp, #16] + 8008564: 9b15 ldr r3, [sp, #84] @ 0x54 + 8008566: 2b00 cmp r3, #0 + 8008568: f2c0 8157 blt.w 800881a <_dtoa_r+0x6fa> + 800856c: 2f0e cmp r7, #14 + 800856e: f300 8154 bgt.w 800881a <_dtoa_r+0x6fa> + 8008572: 4b4b ldr r3, [pc, #300] @ (80086a0 <_dtoa_r+0x580>) + 8008574: eb03 03c7 add.w r3, r3, r7, lsl #3 + 8008578: ed93 7b00 vldr d7, [r3] + 800857c: 9b0c ldr r3, [sp, #48] @ 0x30 + 800857e: 2b00 cmp r3, #0 + 8008580: ed8d 7b00 vstr d7, [sp] + 8008584: f280 80e5 bge.w 8008752 <_dtoa_r+0x632> + 8008588: 9b03 ldr r3, [sp, #12] + 800858a: 2b00 cmp r3, #0 + 800858c: f300 80e1 bgt.w 8008752 <_dtoa_r+0x632> + 8008590: d10c bne.n 80085ac <_dtoa_r+0x48c> + 8008592: 4b48 ldr r3, [pc, #288] @ (80086b4 <_dtoa_r+0x594>) + 8008594: 2200 movs r2, #0 + 8008596: ec51 0b17 vmov r0, r1, d7 + 800859a: f7f8 f835 bl 8000608 <__aeabi_dmul> + 800859e: e9dd 2304 ldrd r2, r3, [sp, #16] + 80085a2: f7f8 fab7 bl 8000b14 <__aeabi_dcmpge> + 80085a6: 2800 cmp r0, #0 + 80085a8: f000 8266 beq.w 8008a78 <_dtoa_r+0x958> + 80085ac: 2400 movs r4, #0 + 80085ae: 4625 mov r5, r4 + 80085b0: 9b0c ldr r3, [sp, #48] @ 0x30 + 80085b2: 4656 mov r6, sl + 80085b4: ea6f 0803 mvn.w r8, r3 + 80085b8: 2700 movs r7, #0 + 80085ba: 4621 mov r1, r4 + 80085bc: 4648 mov r0, r9 + 80085be: f000 fcbf bl 8008f40 <_Bfree> + 80085c2: 2d00 cmp r5, #0 + 80085c4: f000 80bd beq.w 8008742 <_dtoa_r+0x622> + 80085c8: b12f cbz r7, 80085d6 <_dtoa_r+0x4b6> + 80085ca: 42af cmp r7, r5 + 80085cc: d003 beq.n 80085d6 <_dtoa_r+0x4b6> + 80085ce: 4639 mov r1, r7 + 80085d0: 4648 mov r0, r9 + 80085d2: f000 fcb5 bl 8008f40 <_Bfree> + 80085d6: 4629 mov r1, r5 + 80085d8: 4648 mov r0, r9 + 80085da: f000 fcb1 bl 8008f40 <_Bfree> + 80085de: e0b0 b.n 8008742 <_dtoa_r+0x622> + 80085e0: 07e2 lsls r2, r4, #31 + 80085e2: d505 bpl.n 80085f0 <_dtoa_r+0x4d0> + 80085e4: e9d5 2300 ldrd r2, r3, [r5] + 80085e8: f7f8 f80e bl 8000608 <__aeabi_dmul> + 80085ec: 3601 adds r6, #1 + 80085ee: 2301 movs r3, #1 + 80085f0: 1064 asrs r4, r4, #1 + 80085f2: 3508 adds r5, #8 + 80085f4: e762 b.n 80084bc <_dtoa_r+0x39c> + 80085f6: 2602 movs r6, #2 + 80085f8: e765 b.n 80084c6 <_dtoa_r+0x3a6> + 80085fa: 9c03 ldr r4, [sp, #12] + 80085fc: 46b8 mov r8, r7 + 80085fe: e784 b.n 800850a <_dtoa_r+0x3ea> + 8008600: 4b27 ldr r3, [pc, #156] @ (80086a0 <_dtoa_r+0x580>) + 8008602: 9909 ldr r1, [sp, #36] @ 0x24 + 8008604: eb03 03c4 add.w r3, r3, r4, lsl #3 + 8008608: e953 2302 ldrd r2, r3, [r3, #-8] + 800860c: 4454 add r4, sl + 800860e: 2900 cmp r1, #0 + 8008610: d054 beq.n 80086bc <_dtoa_r+0x59c> + 8008612: 4929 ldr r1, [pc, #164] @ (80086b8 <_dtoa_r+0x598>) + 8008614: 2000 movs r0, #0 + 8008616: f7f8 f921 bl 800085c <__aeabi_ddiv> + 800861a: 4633 mov r3, r6 + 800861c: 462a mov r2, r5 + 800861e: f7f7 fe3b bl 8000298 <__aeabi_dsub> + 8008622: e9cd 010e strd r0, r1, [sp, #56] @ 0x38 + 8008626: 4656 mov r6, sl + 8008628: e9dd 0104 ldrd r0, r1, [sp, #16] + 800862c: f7f8 fa9c bl 8000b68 <__aeabi_d2iz> + 8008630: 4605 mov r5, r0 + 8008632: f7f7 ff7f bl 8000534 <__aeabi_i2d> + 8008636: 4602 mov r2, r0 + 8008638: 460b mov r3, r1 + 800863a: e9dd 0104 ldrd r0, r1, [sp, #16] + 800863e: f7f7 fe2b bl 8000298 <__aeabi_dsub> + 8008642: 3530 adds r5, #48 @ 0x30 + 8008644: 4602 mov r2, r0 + 8008646: 460b mov r3, r1 + 8008648: e9cd 2304 strd r2, r3, [sp, #16] + 800864c: f806 5b01 strb.w r5, [r6], #1 + 8008650: e9dd 230e ldrd r2, r3, [sp, #56] @ 0x38 + 8008654: f7f8 fa4a bl 8000aec <__aeabi_dcmplt> + 8008658: 2800 cmp r0, #0 + 800865a: d172 bne.n 8008742 <_dtoa_r+0x622> + 800865c: e9dd 2304 ldrd r2, r3, [sp, #16] + 8008660: 4911 ldr r1, [pc, #68] @ (80086a8 <_dtoa_r+0x588>) + 8008662: 2000 movs r0, #0 + 8008664: f7f7 fe18 bl 8000298 <__aeabi_dsub> + 8008668: e9dd 230e ldrd r2, r3, [sp, #56] @ 0x38 + 800866c: f7f8 fa3e bl 8000aec <__aeabi_dcmplt> + 8008670: 2800 cmp r0, #0 + 8008672: f040 80b4 bne.w 80087de <_dtoa_r+0x6be> + 8008676: 42a6 cmp r6, r4 + 8008678: f43f af70 beq.w 800855c <_dtoa_r+0x43c> + 800867c: e9dd 010e ldrd r0, r1, [sp, #56] @ 0x38 + 8008680: 4b0a ldr r3, [pc, #40] @ (80086ac <_dtoa_r+0x58c>) + 8008682: 2200 movs r2, #0 + 8008684: f7f7 ffc0 bl 8000608 <__aeabi_dmul> + 8008688: 4b08 ldr r3, [pc, #32] @ (80086ac <_dtoa_r+0x58c>) + 800868a: e9cd 010e strd r0, r1, [sp, #56] @ 0x38 + 800868e: 2200 movs r2, #0 + 8008690: e9dd 0104 ldrd r0, r1, [sp, #16] + 8008694: f7f7 ffb8 bl 8000608 <__aeabi_dmul> + 8008698: e9cd 0104 strd r0, r1, [sp, #16] + 800869c: e7c4 b.n 8008628 <_dtoa_r+0x508> + 800869e: bf00 nop + 80086a0: 0800bae8 .word 0x0800bae8 + 80086a4: 0800bac0 .word 0x0800bac0 + 80086a8: 3ff00000 .word 0x3ff00000 + 80086ac: 40240000 .word 0x40240000 + 80086b0: 401c0000 .word 0x401c0000 + 80086b4: 40140000 .word 0x40140000 + 80086b8: 3fe00000 .word 0x3fe00000 + 80086bc: 4631 mov r1, r6 + 80086be: 4628 mov r0, r5 + 80086c0: f7f7 ffa2 bl 8000608 <__aeabi_dmul> + 80086c4: e9cd 010e strd r0, r1, [sp, #56] @ 0x38 + 80086c8: 9413 str r4, [sp, #76] @ 0x4c + 80086ca: 4656 mov r6, sl + 80086cc: e9dd 0104 ldrd r0, r1, [sp, #16] + 80086d0: f7f8 fa4a bl 8000b68 <__aeabi_d2iz> + 80086d4: 4605 mov r5, r0 + 80086d6: f7f7 ff2d bl 8000534 <__aeabi_i2d> + 80086da: 4602 mov r2, r0 + 80086dc: 460b mov r3, r1 + 80086de: e9dd 0104 ldrd r0, r1, [sp, #16] + 80086e2: f7f7 fdd9 bl 8000298 <__aeabi_dsub> + 80086e6: 3530 adds r5, #48 @ 0x30 + 80086e8: f806 5b01 strb.w r5, [r6], #1 + 80086ec: 4602 mov r2, r0 + 80086ee: 460b mov r3, r1 + 80086f0: 42a6 cmp r6, r4 + 80086f2: e9cd 2304 strd r2, r3, [sp, #16] + 80086f6: f04f 0200 mov.w r2, #0 + 80086fa: d124 bne.n 8008746 <_dtoa_r+0x626> + 80086fc: 4baf ldr r3, [pc, #700] @ (80089bc <_dtoa_r+0x89c>) + 80086fe: e9dd 010e ldrd r0, r1, [sp, #56] @ 0x38 + 8008702: f7f7 fdcb bl 800029c <__adddf3> + 8008706: 4602 mov r2, r0 + 8008708: 460b mov r3, r1 + 800870a: e9dd 0104 ldrd r0, r1, [sp, #16] + 800870e: f7f8 fa0b bl 8000b28 <__aeabi_dcmpgt> + 8008712: 2800 cmp r0, #0 + 8008714: d163 bne.n 80087de <_dtoa_r+0x6be> + 8008716: e9dd 230e ldrd r2, r3, [sp, #56] @ 0x38 + 800871a: 49a8 ldr r1, [pc, #672] @ (80089bc <_dtoa_r+0x89c>) + 800871c: 2000 movs r0, #0 + 800871e: f7f7 fdbb bl 8000298 <__aeabi_dsub> + 8008722: 4602 mov r2, r0 + 8008724: 460b mov r3, r1 + 8008726: e9dd 0104 ldrd r0, r1, [sp, #16] + 800872a: f7f8 f9df bl 8000aec <__aeabi_dcmplt> + 800872e: 2800 cmp r0, #0 + 8008730: f43f af14 beq.w 800855c <_dtoa_r+0x43c> + 8008734: 9e13 ldr r6, [sp, #76] @ 0x4c + 8008736: 1e73 subs r3, r6, #1 + 8008738: 9313 str r3, [sp, #76] @ 0x4c + 800873a: f816 3c01 ldrb.w r3, [r6, #-1] + 800873e: 2b30 cmp r3, #48 @ 0x30 + 8008740: d0f8 beq.n 8008734 <_dtoa_r+0x614> + 8008742: 4647 mov r7, r8 + 8008744: e03b b.n 80087be <_dtoa_r+0x69e> + 8008746: 4b9e ldr r3, [pc, #632] @ (80089c0 <_dtoa_r+0x8a0>) + 8008748: f7f7 ff5e bl 8000608 <__aeabi_dmul> + 800874c: e9cd 0104 strd r0, r1, [sp, #16] + 8008750: e7bc b.n 80086cc <_dtoa_r+0x5ac> + 8008752: e9dd 4504 ldrd r4, r5, [sp, #16] + 8008756: 4656 mov r6, sl + 8008758: e9dd 2300 ldrd r2, r3, [sp] + 800875c: 4620 mov r0, r4 + 800875e: 4629 mov r1, r5 + 8008760: f7f8 f87c bl 800085c <__aeabi_ddiv> + 8008764: f7f8 fa00 bl 8000b68 <__aeabi_d2iz> + 8008768: 4680 mov r8, r0 + 800876a: f7f7 fee3 bl 8000534 <__aeabi_i2d> + 800876e: e9dd 2300 ldrd r2, r3, [sp] + 8008772: f7f7 ff49 bl 8000608 <__aeabi_dmul> + 8008776: 4602 mov r2, r0 + 8008778: 460b mov r3, r1 + 800877a: 4620 mov r0, r4 + 800877c: 4629 mov r1, r5 + 800877e: f108 0430 add.w r4, r8, #48 @ 0x30 + 8008782: f7f7 fd89 bl 8000298 <__aeabi_dsub> + 8008786: f806 4b01 strb.w r4, [r6], #1 + 800878a: 9d03 ldr r5, [sp, #12] + 800878c: eba6 040a sub.w r4, r6, sl + 8008790: 42a5 cmp r5, r4 + 8008792: 4602 mov r2, r0 + 8008794: 460b mov r3, r1 + 8008796: d133 bne.n 8008800 <_dtoa_r+0x6e0> + 8008798: f7f7 fd80 bl 800029c <__adddf3> + 800879c: e9dd 2300 ldrd r2, r3, [sp] + 80087a0: 4604 mov r4, r0 + 80087a2: 460d mov r5, r1 + 80087a4: f7f8 f9c0 bl 8000b28 <__aeabi_dcmpgt> + 80087a8: b9c0 cbnz r0, 80087dc <_dtoa_r+0x6bc> + 80087aa: e9dd 2300 ldrd r2, r3, [sp] + 80087ae: 4620 mov r0, r4 + 80087b0: 4629 mov r1, r5 + 80087b2: f7f8 f991 bl 8000ad8 <__aeabi_dcmpeq> + 80087b6: b110 cbz r0, 80087be <_dtoa_r+0x69e> + 80087b8: f018 0f01 tst.w r8, #1 + 80087bc: d10e bne.n 80087dc <_dtoa_r+0x6bc> + 80087be: 9902 ldr r1, [sp, #8] + 80087c0: 4648 mov r0, r9 + 80087c2: f000 fbbd bl 8008f40 <_Bfree> + 80087c6: 2300 movs r3, #0 + 80087c8: 7033 strb r3, [r6, #0] + 80087ca: 9b11 ldr r3, [sp, #68] @ 0x44 + 80087cc: 3701 adds r7, #1 + 80087ce: 601f str r7, [r3, #0] + 80087d0: 9b21 ldr r3, [sp, #132] @ 0x84 + 80087d2: 2b00 cmp r3, #0 + 80087d4: f000 824b beq.w 8008c6e <_dtoa_r+0xb4e> + 80087d8: 601e str r6, [r3, #0] + 80087da: e248 b.n 8008c6e <_dtoa_r+0xb4e> + 80087dc: 46b8 mov r8, r7 + 80087de: 4633 mov r3, r6 + 80087e0: 461e mov r6, r3 + 80087e2: f813 2d01 ldrb.w r2, [r3, #-1]! + 80087e6: 2a39 cmp r2, #57 @ 0x39 + 80087e8: d106 bne.n 80087f8 <_dtoa_r+0x6d8> + 80087ea: 459a cmp sl, r3 + 80087ec: d1f8 bne.n 80087e0 <_dtoa_r+0x6c0> + 80087ee: 2230 movs r2, #48 @ 0x30 + 80087f0: f108 0801 add.w r8, r8, #1 + 80087f4: f88a 2000 strb.w r2, [sl] + 80087f8: 781a ldrb r2, [r3, #0] + 80087fa: 3201 adds r2, #1 + 80087fc: 701a strb r2, [r3, #0] + 80087fe: e7a0 b.n 8008742 <_dtoa_r+0x622> + 8008800: 4b6f ldr r3, [pc, #444] @ (80089c0 <_dtoa_r+0x8a0>) + 8008802: 2200 movs r2, #0 + 8008804: f7f7 ff00 bl 8000608 <__aeabi_dmul> + 8008808: 2200 movs r2, #0 + 800880a: 2300 movs r3, #0 + 800880c: 4604 mov r4, r0 + 800880e: 460d mov r5, r1 + 8008810: f7f8 f962 bl 8000ad8 <__aeabi_dcmpeq> + 8008814: 2800 cmp r0, #0 + 8008816: d09f beq.n 8008758 <_dtoa_r+0x638> + 8008818: e7d1 b.n 80087be <_dtoa_r+0x69e> + 800881a: 9a09 ldr r2, [sp, #36] @ 0x24 + 800881c: 2a00 cmp r2, #0 + 800881e: f000 80ea beq.w 80089f6 <_dtoa_r+0x8d6> + 8008822: 9a07 ldr r2, [sp, #28] + 8008824: 2a01 cmp r2, #1 + 8008826: f300 80cd bgt.w 80089c4 <_dtoa_r+0x8a4> + 800882a: 9a12 ldr r2, [sp, #72] @ 0x48 + 800882c: 2a00 cmp r2, #0 + 800882e: f000 80c1 beq.w 80089b4 <_dtoa_r+0x894> + 8008832: f203 4333 addw r3, r3, #1075 @ 0x433 + 8008836: 9c08 ldr r4, [sp, #32] + 8008838: 9e00 ldr r6, [sp, #0] + 800883a: 9a00 ldr r2, [sp, #0] + 800883c: 441a add r2, r3 + 800883e: 9200 str r2, [sp, #0] + 8008840: 9a06 ldr r2, [sp, #24] + 8008842: 2101 movs r1, #1 + 8008844: 441a add r2, r3 + 8008846: 4648 mov r0, r9 + 8008848: 9206 str r2, [sp, #24] + 800884a: f000 fc2d bl 80090a8 <__i2b> + 800884e: 4605 mov r5, r0 + 8008850: b166 cbz r6, 800886c <_dtoa_r+0x74c> + 8008852: 9b06 ldr r3, [sp, #24] + 8008854: 2b00 cmp r3, #0 + 8008856: dd09 ble.n 800886c <_dtoa_r+0x74c> + 8008858: 42b3 cmp r3, r6 + 800885a: 9a00 ldr r2, [sp, #0] + 800885c: bfa8 it ge + 800885e: 4633 movge r3, r6 + 8008860: 1ad2 subs r2, r2, r3 + 8008862: 9200 str r2, [sp, #0] + 8008864: 9a06 ldr r2, [sp, #24] + 8008866: 1af6 subs r6, r6, r3 + 8008868: 1ad3 subs r3, r2, r3 + 800886a: 9306 str r3, [sp, #24] + 800886c: 9b08 ldr r3, [sp, #32] + 800886e: b30b cbz r3, 80088b4 <_dtoa_r+0x794> + 8008870: 9b09 ldr r3, [sp, #36] @ 0x24 + 8008872: 2b00 cmp r3, #0 + 8008874: f000 80c6 beq.w 8008a04 <_dtoa_r+0x8e4> + 8008878: 2c00 cmp r4, #0 + 800887a: f000 80c0 beq.w 80089fe <_dtoa_r+0x8de> + 800887e: 4629 mov r1, r5 + 8008880: 4622 mov r2, r4 + 8008882: 4648 mov r0, r9 + 8008884: f000 fcc8 bl 8009218 <__pow5mult> + 8008888: 9a02 ldr r2, [sp, #8] + 800888a: 4601 mov r1, r0 + 800888c: 4605 mov r5, r0 + 800888e: 4648 mov r0, r9 + 8008890: f000 fc20 bl 80090d4 <__multiply> + 8008894: 9902 ldr r1, [sp, #8] + 8008896: 4680 mov r8, r0 + 8008898: 4648 mov r0, r9 + 800889a: f000 fb51 bl 8008f40 <_Bfree> + 800889e: 9b08 ldr r3, [sp, #32] + 80088a0: 1b1b subs r3, r3, r4 + 80088a2: 9308 str r3, [sp, #32] + 80088a4: f000 80b1 beq.w 8008a0a <_dtoa_r+0x8ea> + 80088a8: 9a08 ldr r2, [sp, #32] + 80088aa: 4641 mov r1, r8 + 80088ac: 4648 mov r0, r9 + 80088ae: f000 fcb3 bl 8009218 <__pow5mult> + 80088b2: 9002 str r0, [sp, #8] + 80088b4: 2101 movs r1, #1 + 80088b6: 4648 mov r0, r9 + 80088b8: f000 fbf6 bl 80090a8 <__i2b> + 80088bc: 9b0d ldr r3, [sp, #52] @ 0x34 + 80088be: 4604 mov r4, r0 + 80088c0: 2b00 cmp r3, #0 + 80088c2: f000 81d8 beq.w 8008c76 <_dtoa_r+0xb56> + 80088c6: 461a mov r2, r3 + 80088c8: 4601 mov r1, r0 + 80088ca: 4648 mov r0, r9 + 80088cc: f000 fca4 bl 8009218 <__pow5mult> + 80088d0: 9b07 ldr r3, [sp, #28] + 80088d2: 2b01 cmp r3, #1 + 80088d4: 4604 mov r4, r0 + 80088d6: f300 809f bgt.w 8008a18 <_dtoa_r+0x8f8> + 80088da: 9b04 ldr r3, [sp, #16] + 80088dc: 2b00 cmp r3, #0 + 80088de: f040 8097 bne.w 8008a10 <_dtoa_r+0x8f0> + 80088e2: 9b05 ldr r3, [sp, #20] + 80088e4: f3c3 0313 ubfx r3, r3, #0, #20 + 80088e8: 2b00 cmp r3, #0 + 80088ea: f040 8093 bne.w 8008a14 <_dtoa_r+0x8f4> + 80088ee: 9b05 ldr r3, [sp, #20] + 80088f0: f023 4300 bic.w r3, r3, #2147483648 @ 0x80000000 + 80088f4: 0d1b lsrs r3, r3, #20 + 80088f6: 051b lsls r3, r3, #20 + 80088f8: b133 cbz r3, 8008908 <_dtoa_r+0x7e8> + 80088fa: 9b00 ldr r3, [sp, #0] + 80088fc: 3301 adds r3, #1 + 80088fe: 9300 str r3, [sp, #0] + 8008900: 9b06 ldr r3, [sp, #24] + 8008902: 3301 adds r3, #1 + 8008904: 9306 str r3, [sp, #24] + 8008906: 2301 movs r3, #1 + 8008908: 9308 str r3, [sp, #32] + 800890a: 9b0d ldr r3, [sp, #52] @ 0x34 + 800890c: 2b00 cmp r3, #0 + 800890e: f000 81b8 beq.w 8008c82 <_dtoa_r+0xb62> + 8008912: 6923 ldr r3, [r4, #16] + 8008914: eb04 0383 add.w r3, r4, r3, lsl #2 + 8008918: 6918 ldr r0, [r3, #16] + 800891a: f000 fb79 bl 8009010 <__hi0bits> + 800891e: f1c0 0020 rsb r0, r0, #32 + 8008922: 9b06 ldr r3, [sp, #24] + 8008924: 4418 add r0, r3 + 8008926: f010 001f ands.w r0, r0, #31 + 800892a: f000 8082 beq.w 8008a32 <_dtoa_r+0x912> + 800892e: f1c0 0320 rsb r3, r0, #32 + 8008932: 2b04 cmp r3, #4 + 8008934: dd73 ble.n 8008a1e <_dtoa_r+0x8fe> + 8008936: 9b00 ldr r3, [sp, #0] + 8008938: f1c0 001c rsb r0, r0, #28 + 800893c: 4403 add r3, r0 + 800893e: 9300 str r3, [sp, #0] + 8008940: 9b06 ldr r3, [sp, #24] + 8008942: 4403 add r3, r0 + 8008944: 4406 add r6, r0 + 8008946: 9306 str r3, [sp, #24] + 8008948: 9b00 ldr r3, [sp, #0] + 800894a: 2b00 cmp r3, #0 + 800894c: dd05 ble.n 800895a <_dtoa_r+0x83a> + 800894e: 9902 ldr r1, [sp, #8] + 8008950: 461a mov r2, r3 + 8008952: 4648 mov r0, r9 + 8008954: f000 fcba bl 80092cc <__lshift> + 8008958: 9002 str r0, [sp, #8] + 800895a: 9b06 ldr r3, [sp, #24] + 800895c: 2b00 cmp r3, #0 + 800895e: dd05 ble.n 800896c <_dtoa_r+0x84c> + 8008960: 4621 mov r1, r4 + 8008962: 461a mov r2, r3 + 8008964: 4648 mov r0, r9 + 8008966: f000 fcb1 bl 80092cc <__lshift> + 800896a: 4604 mov r4, r0 + 800896c: 9b10 ldr r3, [sp, #64] @ 0x40 + 800896e: 2b00 cmp r3, #0 + 8008970: d061 beq.n 8008a36 <_dtoa_r+0x916> + 8008972: 9802 ldr r0, [sp, #8] + 8008974: 4621 mov r1, r4 + 8008976: f000 fd15 bl 80093a4 <__mcmp> + 800897a: 2800 cmp r0, #0 + 800897c: da5b bge.n 8008a36 <_dtoa_r+0x916> + 800897e: 2300 movs r3, #0 + 8008980: 9902 ldr r1, [sp, #8] + 8008982: 220a movs r2, #10 + 8008984: 4648 mov r0, r9 + 8008986: f000 fafd bl 8008f84 <__multadd> + 800898a: 9b09 ldr r3, [sp, #36] @ 0x24 + 800898c: 9002 str r0, [sp, #8] + 800898e: f107 38ff add.w r8, r7, #4294967295 + 8008992: 2b00 cmp r3, #0 + 8008994: f000 8177 beq.w 8008c86 <_dtoa_r+0xb66> + 8008998: 4629 mov r1, r5 + 800899a: 2300 movs r3, #0 + 800899c: 220a movs r2, #10 + 800899e: 4648 mov r0, r9 + 80089a0: f000 faf0 bl 8008f84 <__multadd> + 80089a4: f1bb 0f00 cmp.w fp, #0 + 80089a8: 4605 mov r5, r0 + 80089aa: dc6f bgt.n 8008a8c <_dtoa_r+0x96c> + 80089ac: 9b07 ldr r3, [sp, #28] + 80089ae: 2b02 cmp r3, #2 + 80089b0: dc49 bgt.n 8008a46 <_dtoa_r+0x926> + 80089b2: e06b b.n 8008a8c <_dtoa_r+0x96c> + 80089b4: 9b14 ldr r3, [sp, #80] @ 0x50 + 80089b6: f1c3 0336 rsb r3, r3, #54 @ 0x36 + 80089ba: e73c b.n 8008836 <_dtoa_r+0x716> + 80089bc: 3fe00000 .word 0x3fe00000 + 80089c0: 40240000 .word 0x40240000 + 80089c4: 9b03 ldr r3, [sp, #12] + 80089c6: 1e5c subs r4, r3, #1 + 80089c8: 9b08 ldr r3, [sp, #32] + 80089ca: 42a3 cmp r3, r4 + 80089cc: db09 blt.n 80089e2 <_dtoa_r+0x8c2> + 80089ce: 1b1c subs r4, r3, r4 + 80089d0: 9b03 ldr r3, [sp, #12] + 80089d2: 2b00 cmp r3, #0 + 80089d4: f6bf af30 bge.w 8008838 <_dtoa_r+0x718> + 80089d8: 9b00 ldr r3, [sp, #0] + 80089da: 9a03 ldr r2, [sp, #12] + 80089dc: 1a9e subs r6, r3, r2 + 80089de: 2300 movs r3, #0 + 80089e0: e72b b.n 800883a <_dtoa_r+0x71a> + 80089e2: 9b08 ldr r3, [sp, #32] + 80089e4: 9a0d ldr r2, [sp, #52] @ 0x34 + 80089e6: 9408 str r4, [sp, #32] + 80089e8: 1ae3 subs r3, r4, r3 + 80089ea: 441a add r2, r3 + 80089ec: 9e00 ldr r6, [sp, #0] + 80089ee: 9b03 ldr r3, [sp, #12] + 80089f0: 920d str r2, [sp, #52] @ 0x34 + 80089f2: 2400 movs r4, #0 + 80089f4: e721 b.n 800883a <_dtoa_r+0x71a> + 80089f6: 9c08 ldr r4, [sp, #32] + 80089f8: 9e00 ldr r6, [sp, #0] + 80089fa: 9d09 ldr r5, [sp, #36] @ 0x24 + 80089fc: e728 b.n 8008850 <_dtoa_r+0x730> + 80089fe: f8dd 8008 ldr.w r8, [sp, #8] + 8008a02: e751 b.n 80088a8 <_dtoa_r+0x788> + 8008a04: 9a08 ldr r2, [sp, #32] + 8008a06: 9902 ldr r1, [sp, #8] + 8008a08: e750 b.n 80088ac <_dtoa_r+0x78c> + 8008a0a: f8cd 8008 str.w r8, [sp, #8] + 8008a0e: e751 b.n 80088b4 <_dtoa_r+0x794> + 8008a10: 2300 movs r3, #0 + 8008a12: e779 b.n 8008908 <_dtoa_r+0x7e8> + 8008a14: 9b04 ldr r3, [sp, #16] + 8008a16: e777 b.n 8008908 <_dtoa_r+0x7e8> + 8008a18: 2300 movs r3, #0 + 8008a1a: 9308 str r3, [sp, #32] + 8008a1c: e779 b.n 8008912 <_dtoa_r+0x7f2> + 8008a1e: d093 beq.n 8008948 <_dtoa_r+0x828> + 8008a20: 9a00 ldr r2, [sp, #0] + 8008a22: 331c adds r3, #28 + 8008a24: 441a add r2, r3 + 8008a26: 9200 str r2, [sp, #0] + 8008a28: 9a06 ldr r2, [sp, #24] + 8008a2a: 441a add r2, r3 + 8008a2c: 441e add r6, r3 + 8008a2e: 9206 str r2, [sp, #24] + 8008a30: e78a b.n 8008948 <_dtoa_r+0x828> + 8008a32: 4603 mov r3, r0 + 8008a34: e7f4 b.n 8008a20 <_dtoa_r+0x900> + 8008a36: 9b03 ldr r3, [sp, #12] + 8008a38: 2b00 cmp r3, #0 + 8008a3a: 46b8 mov r8, r7 + 8008a3c: dc20 bgt.n 8008a80 <_dtoa_r+0x960> + 8008a3e: 469b mov fp, r3 + 8008a40: 9b07 ldr r3, [sp, #28] + 8008a42: 2b02 cmp r3, #2 + 8008a44: dd1e ble.n 8008a84 <_dtoa_r+0x964> + 8008a46: f1bb 0f00 cmp.w fp, #0 + 8008a4a: f47f adb1 bne.w 80085b0 <_dtoa_r+0x490> + 8008a4e: 4621 mov r1, r4 + 8008a50: 465b mov r3, fp + 8008a52: 2205 movs r2, #5 + 8008a54: 4648 mov r0, r9 + 8008a56: f000 fa95 bl 8008f84 <__multadd> + 8008a5a: 4601 mov r1, r0 + 8008a5c: 4604 mov r4, r0 + 8008a5e: 9802 ldr r0, [sp, #8] + 8008a60: f000 fca0 bl 80093a4 <__mcmp> + 8008a64: 2800 cmp r0, #0 + 8008a66: f77f ada3 ble.w 80085b0 <_dtoa_r+0x490> + 8008a6a: 4656 mov r6, sl + 8008a6c: 2331 movs r3, #49 @ 0x31 + 8008a6e: f806 3b01 strb.w r3, [r6], #1 + 8008a72: f108 0801 add.w r8, r8, #1 + 8008a76: e59f b.n 80085b8 <_dtoa_r+0x498> + 8008a78: 9c03 ldr r4, [sp, #12] + 8008a7a: 46b8 mov r8, r7 + 8008a7c: 4625 mov r5, r4 + 8008a7e: e7f4 b.n 8008a6a <_dtoa_r+0x94a> + 8008a80: f8dd b00c ldr.w fp, [sp, #12] + 8008a84: 9b09 ldr r3, [sp, #36] @ 0x24 + 8008a86: 2b00 cmp r3, #0 + 8008a88: f000 8101 beq.w 8008c8e <_dtoa_r+0xb6e> + 8008a8c: 2e00 cmp r6, #0 + 8008a8e: dd05 ble.n 8008a9c <_dtoa_r+0x97c> + 8008a90: 4629 mov r1, r5 + 8008a92: 4632 mov r2, r6 + 8008a94: 4648 mov r0, r9 + 8008a96: f000 fc19 bl 80092cc <__lshift> + 8008a9a: 4605 mov r5, r0 + 8008a9c: 9b08 ldr r3, [sp, #32] + 8008a9e: 2b00 cmp r3, #0 + 8008aa0: d05c beq.n 8008b5c <_dtoa_r+0xa3c> + 8008aa2: 6869 ldr r1, [r5, #4] + 8008aa4: 4648 mov r0, r9 + 8008aa6: f000 fa0b bl 8008ec0 <_Balloc> + 8008aaa: 4606 mov r6, r0 + 8008aac: b928 cbnz r0, 8008aba <_dtoa_r+0x99a> + 8008aae: 4b82 ldr r3, [pc, #520] @ (8008cb8 <_dtoa_r+0xb98>) + 8008ab0: 4602 mov r2, r0 + 8008ab2: f240 21ef movw r1, #751 @ 0x2ef + 8008ab6: f7ff bb4a b.w 800814e <_dtoa_r+0x2e> + 8008aba: 692a ldr r2, [r5, #16] + 8008abc: 3202 adds r2, #2 + 8008abe: 0092 lsls r2, r2, #2 + 8008ac0: f105 010c add.w r1, r5, #12 + 8008ac4: 300c adds r0, #12 + 8008ac6: f001 f979 bl 8009dbc + 8008aca: 2201 movs r2, #1 + 8008acc: 4631 mov r1, r6 + 8008ace: 4648 mov r0, r9 + 8008ad0: f000 fbfc bl 80092cc <__lshift> + 8008ad4: f10a 0301 add.w r3, sl, #1 + 8008ad8: 9300 str r3, [sp, #0] + 8008ada: eb0a 030b add.w r3, sl, fp + 8008ade: 9308 str r3, [sp, #32] + 8008ae0: 9b04 ldr r3, [sp, #16] + 8008ae2: f003 0301 and.w r3, r3, #1 + 8008ae6: 462f mov r7, r5 + 8008ae8: 9306 str r3, [sp, #24] + 8008aea: 4605 mov r5, r0 + 8008aec: 9b00 ldr r3, [sp, #0] + 8008aee: 9802 ldr r0, [sp, #8] + 8008af0: 4621 mov r1, r4 + 8008af2: f103 3bff add.w fp, r3, #4294967295 + 8008af6: f7ff fa8a bl 800800e + 8008afa: 4603 mov r3, r0 + 8008afc: 3330 adds r3, #48 @ 0x30 + 8008afe: 9003 str r0, [sp, #12] + 8008b00: 4639 mov r1, r7 + 8008b02: 9802 ldr r0, [sp, #8] + 8008b04: 9309 str r3, [sp, #36] @ 0x24 + 8008b06: f000 fc4d bl 80093a4 <__mcmp> + 8008b0a: 462a mov r2, r5 + 8008b0c: 9004 str r0, [sp, #16] + 8008b0e: 4621 mov r1, r4 + 8008b10: 4648 mov r0, r9 + 8008b12: f000 fc63 bl 80093dc <__mdiff> + 8008b16: 68c2 ldr r2, [r0, #12] + 8008b18: 9b09 ldr r3, [sp, #36] @ 0x24 + 8008b1a: 4606 mov r6, r0 + 8008b1c: bb02 cbnz r2, 8008b60 <_dtoa_r+0xa40> + 8008b1e: 4601 mov r1, r0 + 8008b20: 9802 ldr r0, [sp, #8] + 8008b22: f000 fc3f bl 80093a4 <__mcmp> + 8008b26: 9b09 ldr r3, [sp, #36] @ 0x24 + 8008b28: 4602 mov r2, r0 + 8008b2a: 4631 mov r1, r6 + 8008b2c: 4648 mov r0, r9 + 8008b2e: 920c str r2, [sp, #48] @ 0x30 + 8008b30: 9309 str r3, [sp, #36] @ 0x24 + 8008b32: f000 fa05 bl 8008f40 <_Bfree> + 8008b36: 9b07 ldr r3, [sp, #28] + 8008b38: 9a0c ldr r2, [sp, #48] @ 0x30 + 8008b3a: 9e00 ldr r6, [sp, #0] + 8008b3c: ea42 0103 orr.w r1, r2, r3 + 8008b40: 9b06 ldr r3, [sp, #24] + 8008b42: 4319 orrs r1, r3 + 8008b44: 9b09 ldr r3, [sp, #36] @ 0x24 + 8008b46: d10d bne.n 8008b64 <_dtoa_r+0xa44> + 8008b48: 2b39 cmp r3, #57 @ 0x39 + 8008b4a: d027 beq.n 8008b9c <_dtoa_r+0xa7c> + 8008b4c: 9a04 ldr r2, [sp, #16] + 8008b4e: 2a00 cmp r2, #0 + 8008b50: dd01 ble.n 8008b56 <_dtoa_r+0xa36> + 8008b52: 9b03 ldr r3, [sp, #12] + 8008b54: 3331 adds r3, #49 @ 0x31 + 8008b56: f88b 3000 strb.w r3, [fp] + 8008b5a: e52e b.n 80085ba <_dtoa_r+0x49a> + 8008b5c: 4628 mov r0, r5 + 8008b5e: e7b9 b.n 8008ad4 <_dtoa_r+0x9b4> + 8008b60: 2201 movs r2, #1 + 8008b62: e7e2 b.n 8008b2a <_dtoa_r+0xa0a> + 8008b64: 9904 ldr r1, [sp, #16] + 8008b66: 2900 cmp r1, #0 + 8008b68: db04 blt.n 8008b74 <_dtoa_r+0xa54> + 8008b6a: 9807 ldr r0, [sp, #28] + 8008b6c: 4301 orrs r1, r0 + 8008b6e: 9806 ldr r0, [sp, #24] + 8008b70: 4301 orrs r1, r0 + 8008b72: d120 bne.n 8008bb6 <_dtoa_r+0xa96> + 8008b74: 2a00 cmp r2, #0 + 8008b76: ddee ble.n 8008b56 <_dtoa_r+0xa36> + 8008b78: 9902 ldr r1, [sp, #8] + 8008b7a: 9300 str r3, [sp, #0] + 8008b7c: 2201 movs r2, #1 + 8008b7e: 4648 mov r0, r9 + 8008b80: f000 fba4 bl 80092cc <__lshift> + 8008b84: 4621 mov r1, r4 + 8008b86: 9002 str r0, [sp, #8] + 8008b88: f000 fc0c bl 80093a4 <__mcmp> + 8008b8c: 2800 cmp r0, #0 + 8008b8e: 9b00 ldr r3, [sp, #0] + 8008b90: dc02 bgt.n 8008b98 <_dtoa_r+0xa78> + 8008b92: d1e0 bne.n 8008b56 <_dtoa_r+0xa36> + 8008b94: 07da lsls r2, r3, #31 + 8008b96: d5de bpl.n 8008b56 <_dtoa_r+0xa36> + 8008b98: 2b39 cmp r3, #57 @ 0x39 + 8008b9a: d1da bne.n 8008b52 <_dtoa_r+0xa32> + 8008b9c: 2339 movs r3, #57 @ 0x39 + 8008b9e: f88b 3000 strb.w r3, [fp] + 8008ba2: 4633 mov r3, r6 + 8008ba4: 461e mov r6, r3 + 8008ba6: 3b01 subs r3, #1 + 8008ba8: f816 2c01 ldrb.w r2, [r6, #-1] + 8008bac: 2a39 cmp r2, #57 @ 0x39 + 8008bae: d04e beq.n 8008c4e <_dtoa_r+0xb2e> + 8008bb0: 3201 adds r2, #1 + 8008bb2: 701a strb r2, [r3, #0] + 8008bb4: e501 b.n 80085ba <_dtoa_r+0x49a> + 8008bb6: 2a00 cmp r2, #0 + 8008bb8: dd03 ble.n 8008bc2 <_dtoa_r+0xaa2> + 8008bba: 2b39 cmp r3, #57 @ 0x39 + 8008bbc: d0ee beq.n 8008b9c <_dtoa_r+0xa7c> + 8008bbe: 3301 adds r3, #1 + 8008bc0: e7c9 b.n 8008b56 <_dtoa_r+0xa36> + 8008bc2: 9a00 ldr r2, [sp, #0] + 8008bc4: 9908 ldr r1, [sp, #32] + 8008bc6: f802 3c01 strb.w r3, [r2, #-1] + 8008bca: 428a cmp r2, r1 + 8008bcc: d028 beq.n 8008c20 <_dtoa_r+0xb00> + 8008bce: 9902 ldr r1, [sp, #8] + 8008bd0: 2300 movs r3, #0 + 8008bd2: 220a movs r2, #10 + 8008bd4: 4648 mov r0, r9 + 8008bd6: f000 f9d5 bl 8008f84 <__multadd> + 8008bda: 42af cmp r7, r5 + 8008bdc: 9002 str r0, [sp, #8] + 8008bde: f04f 0300 mov.w r3, #0 + 8008be2: f04f 020a mov.w r2, #10 + 8008be6: 4639 mov r1, r7 + 8008be8: 4648 mov r0, r9 + 8008bea: d107 bne.n 8008bfc <_dtoa_r+0xadc> + 8008bec: f000 f9ca bl 8008f84 <__multadd> + 8008bf0: 4607 mov r7, r0 + 8008bf2: 4605 mov r5, r0 + 8008bf4: 9b00 ldr r3, [sp, #0] + 8008bf6: 3301 adds r3, #1 + 8008bf8: 9300 str r3, [sp, #0] + 8008bfa: e777 b.n 8008aec <_dtoa_r+0x9cc> + 8008bfc: f000 f9c2 bl 8008f84 <__multadd> + 8008c00: 4629 mov r1, r5 + 8008c02: 4607 mov r7, r0 + 8008c04: 2300 movs r3, #0 + 8008c06: 220a movs r2, #10 + 8008c08: 4648 mov r0, r9 + 8008c0a: f000 f9bb bl 8008f84 <__multadd> + 8008c0e: 4605 mov r5, r0 + 8008c10: e7f0 b.n 8008bf4 <_dtoa_r+0xad4> + 8008c12: f1bb 0f00 cmp.w fp, #0 + 8008c16: bfcc ite gt + 8008c18: 465e movgt r6, fp + 8008c1a: 2601 movle r6, #1 + 8008c1c: 4456 add r6, sl + 8008c1e: 2700 movs r7, #0 + 8008c20: 9902 ldr r1, [sp, #8] + 8008c22: 9300 str r3, [sp, #0] + 8008c24: 2201 movs r2, #1 + 8008c26: 4648 mov r0, r9 + 8008c28: f000 fb50 bl 80092cc <__lshift> + 8008c2c: 4621 mov r1, r4 + 8008c2e: 9002 str r0, [sp, #8] + 8008c30: f000 fbb8 bl 80093a4 <__mcmp> + 8008c34: 2800 cmp r0, #0 + 8008c36: dcb4 bgt.n 8008ba2 <_dtoa_r+0xa82> + 8008c38: d102 bne.n 8008c40 <_dtoa_r+0xb20> + 8008c3a: 9b00 ldr r3, [sp, #0] + 8008c3c: 07db lsls r3, r3, #31 + 8008c3e: d4b0 bmi.n 8008ba2 <_dtoa_r+0xa82> + 8008c40: 4633 mov r3, r6 + 8008c42: 461e mov r6, r3 + 8008c44: f813 2d01 ldrb.w r2, [r3, #-1]! + 8008c48: 2a30 cmp r2, #48 @ 0x30 + 8008c4a: d0fa beq.n 8008c42 <_dtoa_r+0xb22> + 8008c4c: e4b5 b.n 80085ba <_dtoa_r+0x49a> + 8008c4e: 459a cmp sl, r3 + 8008c50: d1a8 bne.n 8008ba4 <_dtoa_r+0xa84> + 8008c52: 2331 movs r3, #49 @ 0x31 + 8008c54: f108 0801 add.w r8, r8, #1 + 8008c58: f88a 3000 strb.w r3, [sl] + 8008c5c: e4ad b.n 80085ba <_dtoa_r+0x49a> + 8008c5e: 9b21 ldr r3, [sp, #132] @ 0x84 + 8008c60: f8df a058 ldr.w sl, [pc, #88] @ 8008cbc <_dtoa_r+0xb9c> + 8008c64: b11b cbz r3, 8008c6e <_dtoa_r+0xb4e> + 8008c66: f10a 0308 add.w r3, sl, #8 + 8008c6a: 9a21 ldr r2, [sp, #132] @ 0x84 + 8008c6c: 6013 str r3, [r2, #0] + 8008c6e: 4650 mov r0, sl + 8008c70: b017 add sp, #92 @ 0x5c + 8008c72: e8bd 8ff0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, fp, pc} + 8008c76: 9b07 ldr r3, [sp, #28] + 8008c78: 2b01 cmp r3, #1 + 8008c7a: f77f ae2e ble.w 80088da <_dtoa_r+0x7ba> + 8008c7e: 9b0d ldr r3, [sp, #52] @ 0x34 + 8008c80: 9308 str r3, [sp, #32] + 8008c82: 2001 movs r0, #1 + 8008c84: e64d b.n 8008922 <_dtoa_r+0x802> + 8008c86: f1bb 0f00 cmp.w fp, #0 + 8008c8a: f77f aed9 ble.w 8008a40 <_dtoa_r+0x920> + 8008c8e: 4656 mov r6, sl + 8008c90: 9802 ldr r0, [sp, #8] + 8008c92: 4621 mov r1, r4 + 8008c94: f7ff f9bb bl 800800e + 8008c98: f100 0330 add.w r3, r0, #48 @ 0x30 + 8008c9c: f806 3b01 strb.w r3, [r6], #1 + 8008ca0: eba6 020a sub.w r2, r6, sl + 8008ca4: 4593 cmp fp, r2 + 8008ca6: ddb4 ble.n 8008c12 <_dtoa_r+0xaf2> + 8008ca8: 9902 ldr r1, [sp, #8] + 8008caa: 2300 movs r3, #0 + 8008cac: 220a movs r2, #10 + 8008cae: 4648 mov r0, r9 + 8008cb0: f000 f968 bl 8008f84 <__multadd> + 8008cb4: 9002 str r0, [sp, #8] + 8008cb6: e7eb b.n 8008c90 <_dtoa_r+0xb70> + 8008cb8: 0800b9ec .word 0x0800b9ec + 8008cbc: 0800b970 .word 0x0800b970 + +08008cc0 <_free_r>: + 8008cc0: b538 push {r3, r4, r5, lr} + 8008cc2: 4605 mov r5, r0 + 8008cc4: 2900 cmp r1, #0 + 8008cc6: d041 beq.n 8008d4c <_free_r+0x8c> + 8008cc8: f851 3c04 ldr.w r3, [r1, #-4] + 8008ccc: 1f0c subs r4, r1, #4 + 8008cce: 2b00 cmp r3, #0 + 8008cd0: bfb8 it lt + 8008cd2: 18e4 addlt r4, r4, r3 + 8008cd4: f000 f8e8 bl 8008ea8 <__malloc_lock> + 8008cd8: 4a1d ldr r2, [pc, #116] @ (8008d50 <_free_r+0x90>) + 8008cda: 6813 ldr r3, [r2, #0] + 8008cdc: b933 cbnz r3, 8008cec <_free_r+0x2c> + 8008cde: 6063 str r3, [r4, #4] + 8008ce0: 6014 str r4, [r2, #0] + 8008ce2: 4628 mov r0, r5 + 8008ce4: e8bd 4038 ldmia.w sp!, {r3, r4, r5, lr} + 8008ce8: f000 b8e4 b.w 8008eb4 <__malloc_unlock> + 8008cec: 42a3 cmp r3, r4 + 8008cee: d908 bls.n 8008d02 <_free_r+0x42> + 8008cf0: 6820 ldr r0, [r4, #0] + 8008cf2: 1821 adds r1, r4, r0 + 8008cf4: 428b cmp r3, r1 + 8008cf6: bf01 itttt eq + 8008cf8: 6819 ldreq r1, [r3, #0] + 8008cfa: 685b ldreq r3, [r3, #4] + 8008cfc: 1809 addeq r1, r1, r0 + 8008cfe: 6021 streq r1, [r4, #0] + 8008d00: e7ed b.n 8008cde <_free_r+0x1e> + 8008d02: 461a mov r2, r3 + 8008d04: 685b ldr r3, [r3, #4] + 8008d06: b10b cbz r3, 8008d0c <_free_r+0x4c> + 8008d08: 42a3 cmp r3, r4 + 8008d0a: d9fa bls.n 8008d02 <_free_r+0x42> + 8008d0c: 6811 ldr r1, [r2, #0] + 8008d0e: 1850 adds r0, r2, r1 + 8008d10: 42a0 cmp r0, r4 + 8008d12: d10b bne.n 8008d2c <_free_r+0x6c> + 8008d14: 6820 ldr r0, [r4, #0] + 8008d16: 4401 add r1, r0 + 8008d18: 1850 adds r0, r2, r1 + 8008d1a: 4283 cmp r3, r0 + 8008d1c: 6011 str r1, [r2, #0] + 8008d1e: d1e0 bne.n 8008ce2 <_free_r+0x22> + 8008d20: 6818 ldr r0, [r3, #0] + 8008d22: 685b ldr r3, [r3, #4] + 8008d24: 6053 str r3, [r2, #4] + 8008d26: 4408 add r0, r1 + 8008d28: 6010 str r0, [r2, #0] + 8008d2a: e7da b.n 8008ce2 <_free_r+0x22> + 8008d2c: d902 bls.n 8008d34 <_free_r+0x74> + 8008d2e: 230c movs r3, #12 + 8008d30: 602b str r3, [r5, #0] + 8008d32: e7d6 b.n 8008ce2 <_free_r+0x22> + 8008d34: 6820 ldr r0, [r4, #0] + 8008d36: 1821 adds r1, r4, r0 + 8008d38: 428b cmp r3, r1 + 8008d3a: bf04 itt eq + 8008d3c: 6819 ldreq r1, [r3, #0] + 8008d3e: 685b ldreq r3, [r3, #4] + 8008d40: 6063 str r3, [r4, #4] + 8008d42: bf04 itt eq + 8008d44: 1809 addeq r1, r1, r0 + 8008d46: 6021 streq r1, [r4, #0] + 8008d48: 6054 str r4, [r2, #4] + 8008d4a: e7ca b.n 8008ce2 <_free_r+0x22> + 8008d4c: bd38 pop {r3, r4, r5, pc} + 8008d4e: bf00 nop + 8008d50: 200004ec .word 0x200004ec + +08008d54 : + 8008d54: 4b02 ldr r3, [pc, #8] @ (8008d60 ) + 8008d56: 4601 mov r1, r0 + 8008d58: 6818 ldr r0, [r3, #0] + 8008d5a: f000 b825 b.w 8008da8 <_malloc_r> + 8008d5e: bf00 nop + 8008d60: 20000018 .word 0x20000018 + +08008d64 : + 8008d64: b570 push {r4, r5, r6, lr} + 8008d66: 4e0f ldr r6, [pc, #60] @ (8008da4 ) + 8008d68: 460c mov r4, r1 + 8008d6a: 6831 ldr r1, [r6, #0] + 8008d6c: 4605 mov r5, r0 + 8008d6e: b911 cbnz r1, 8008d76 + 8008d70: f001 f814 bl 8009d9c <_sbrk_r> + 8008d74: 6030 str r0, [r6, #0] + 8008d76: 4621 mov r1, r4 + 8008d78: 4628 mov r0, r5 + 8008d7a: f001 f80f bl 8009d9c <_sbrk_r> + 8008d7e: 1c43 adds r3, r0, #1 + 8008d80: d103 bne.n 8008d8a + 8008d82: f04f 34ff mov.w r4, #4294967295 + 8008d86: 4620 mov r0, r4 + 8008d88: bd70 pop {r4, r5, r6, pc} + 8008d8a: 1cc4 adds r4, r0, #3 + 8008d8c: f024 0403 bic.w r4, r4, #3 + 8008d90: 42a0 cmp r0, r4 + 8008d92: d0f8 beq.n 8008d86 + 8008d94: 1a21 subs r1, r4, r0 + 8008d96: 4628 mov r0, r5 + 8008d98: f001 f800 bl 8009d9c <_sbrk_r> + 8008d9c: 3001 adds r0, #1 + 8008d9e: d1f2 bne.n 8008d86 + 8008da0: e7ef b.n 8008d82 + 8008da2: bf00 nop + 8008da4: 200004e8 .word 0x200004e8 + +08008da8 <_malloc_r>: + 8008da8: e92d 43f8 stmdb sp!, {r3, r4, r5, r6, r7, r8, r9, lr} + 8008dac: 1ccd adds r5, r1, #3 + 8008dae: f025 0503 bic.w r5, r5, #3 + 8008db2: 3508 adds r5, #8 + 8008db4: 2d0c cmp r5, #12 + 8008db6: bf38 it cc + 8008db8: 250c movcc r5, #12 + 8008dba: 2d00 cmp r5, #0 + 8008dbc: 4606 mov r6, r0 + 8008dbe: db01 blt.n 8008dc4 <_malloc_r+0x1c> + 8008dc0: 42a9 cmp r1, r5 + 8008dc2: d904 bls.n 8008dce <_malloc_r+0x26> + 8008dc4: 230c movs r3, #12 + 8008dc6: 6033 str r3, [r6, #0] + 8008dc8: 2000 movs r0, #0 + 8008dca: e8bd 83f8 ldmia.w sp!, {r3, r4, r5, r6, r7, r8, r9, pc} + 8008dce: f8df 80d4 ldr.w r8, [pc, #212] @ 8008ea4 <_malloc_r+0xfc> + 8008dd2: f000 f869 bl 8008ea8 <__malloc_lock> + 8008dd6: f8d8 3000 ldr.w r3, [r8] + 8008dda: 461c mov r4, r3 + 8008ddc: bb44 cbnz r4, 8008e30 <_malloc_r+0x88> + 8008dde: 4629 mov r1, r5 + 8008de0: 4630 mov r0, r6 + 8008de2: f7ff ffbf bl 8008d64 + 8008de6: 1c43 adds r3, r0, #1 + 8008de8: 4604 mov r4, r0 + 8008dea: d158 bne.n 8008e9e <_malloc_r+0xf6> + 8008dec: f8d8 4000 ldr.w r4, [r8] + 8008df0: 4627 mov r7, r4 + 8008df2: 2f00 cmp r7, #0 + 8008df4: d143 bne.n 8008e7e <_malloc_r+0xd6> + 8008df6: 2c00 cmp r4, #0 + 8008df8: d04b beq.n 8008e92 <_malloc_r+0xea> + 8008dfa: 6823 ldr r3, [r4, #0] + 8008dfc: 4639 mov r1, r7 + 8008dfe: 4630 mov r0, r6 + 8008e00: eb04 0903 add.w r9, r4, r3 + 8008e04: f000 ffca bl 8009d9c <_sbrk_r> + 8008e08: 4581 cmp r9, r0 + 8008e0a: d142 bne.n 8008e92 <_malloc_r+0xea> + 8008e0c: 6821 ldr r1, [r4, #0] + 8008e0e: 1a6d subs r5, r5, r1 + 8008e10: 4629 mov r1, r5 + 8008e12: 4630 mov r0, r6 + 8008e14: f7ff ffa6 bl 8008d64 + 8008e18: 3001 adds r0, #1 + 8008e1a: d03a beq.n 8008e92 <_malloc_r+0xea> + 8008e1c: 6823 ldr r3, [r4, #0] + 8008e1e: 442b add r3, r5 + 8008e20: 6023 str r3, [r4, #0] + 8008e22: f8d8 3000 ldr.w r3, [r8] + 8008e26: 685a ldr r2, [r3, #4] + 8008e28: bb62 cbnz r2, 8008e84 <_malloc_r+0xdc> + 8008e2a: f8c8 7000 str.w r7, [r8] + 8008e2e: e00f b.n 8008e50 <_malloc_r+0xa8> + 8008e30: 6822 ldr r2, [r4, #0] + 8008e32: 1b52 subs r2, r2, r5 + 8008e34: d420 bmi.n 8008e78 <_malloc_r+0xd0> + 8008e36: 2a0b cmp r2, #11 + 8008e38: d917 bls.n 8008e6a <_malloc_r+0xc2> + 8008e3a: 1961 adds r1, r4, r5 + 8008e3c: 42a3 cmp r3, r4 + 8008e3e: 6025 str r5, [r4, #0] + 8008e40: bf18 it ne + 8008e42: 6059 strne r1, [r3, #4] + 8008e44: 6863 ldr r3, [r4, #4] + 8008e46: bf08 it eq + 8008e48: f8c8 1000 streq.w r1, [r8] + 8008e4c: 5162 str r2, [r4, r5] + 8008e4e: 604b str r3, [r1, #4] + 8008e50: 4630 mov r0, r6 + 8008e52: f000 f82f bl 8008eb4 <__malloc_unlock> + 8008e56: f104 000b add.w r0, r4, #11 + 8008e5a: 1d23 adds r3, r4, #4 + 8008e5c: f020 0007 bic.w r0, r0, #7 + 8008e60: 1ac2 subs r2, r0, r3 + 8008e62: bf1c itt ne + 8008e64: 1a1b subne r3, r3, r0 + 8008e66: 50a3 strne r3, [r4, r2] + 8008e68: e7af b.n 8008dca <_malloc_r+0x22> + 8008e6a: 6862 ldr r2, [r4, #4] + 8008e6c: 42a3 cmp r3, r4 + 8008e6e: bf0c ite eq + 8008e70: f8c8 2000 streq.w r2, [r8] + 8008e74: 605a strne r2, [r3, #4] + 8008e76: e7eb b.n 8008e50 <_malloc_r+0xa8> + 8008e78: 4623 mov r3, r4 + 8008e7a: 6864 ldr r4, [r4, #4] + 8008e7c: e7ae b.n 8008ddc <_malloc_r+0x34> + 8008e7e: 463c mov r4, r7 + 8008e80: 687f ldr r7, [r7, #4] + 8008e82: e7b6 b.n 8008df2 <_malloc_r+0x4a> + 8008e84: 461a mov r2, r3 + 8008e86: 685b ldr r3, [r3, #4] + 8008e88: 42a3 cmp r3, r4 + 8008e8a: d1fb bne.n 8008e84 <_malloc_r+0xdc> + 8008e8c: 2300 movs r3, #0 + 8008e8e: 6053 str r3, [r2, #4] + 8008e90: e7de b.n 8008e50 <_malloc_r+0xa8> + 8008e92: 230c movs r3, #12 + 8008e94: 6033 str r3, [r6, #0] + 8008e96: 4630 mov r0, r6 + 8008e98: f000 f80c bl 8008eb4 <__malloc_unlock> + 8008e9c: e794 b.n 8008dc8 <_malloc_r+0x20> + 8008e9e: 6005 str r5, [r0, #0] + 8008ea0: e7d6 b.n 8008e50 <_malloc_r+0xa8> + 8008ea2: bf00 nop + 8008ea4: 200004ec .word 0x200004ec + +08008ea8 <__malloc_lock>: + 8008ea8: 4801 ldr r0, [pc, #4] @ (8008eb0 <__malloc_lock+0x8>) + 8008eaa: f7ff b8ae b.w 800800a <__retarget_lock_acquire_recursive> + 8008eae: bf00 nop + 8008eb0: 200004e4 .word 0x200004e4 + +08008eb4 <__malloc_unlock>: + 8008eb4: 4801 ldr r0, [pc, #4] @ (8008ebc <__malloc_unlock+0x8>) + 8008eb6: f7ff b8a9 b.w 800800c <__retarget_lock_release_recursive> + 8008eba: bf00 nop + 8008ebc: 200004e4 .word 0x200004e4 + +08008ec0 <_Balloc>: + 8008ec0: b570 push {r4, r5, r6, lr} + 8008ec2: 69c6 ldr r6, [r0, #28] + 8008ec4: 4604 mov r4, r0 + 8008ec6: 460d mov r5, r1 + 8008ec8: b976 cbnz r6, 8008ee8 <_Balloc+0x28> + 8008eca: 2010 movs r0, #16 + 8008ecc: f7ff ff42 bl 8008d54 + 8008ed0: 4602 mov r2, r0 + 8008ed2: 61e0 str r0, [r4, #28] + 8008ed4: b920 cbnz r0, 8008ee0 <_Balloc+0x20> + 8008ed6: 4b18 ldr r3, [pc, #96] @ (8008f38 <_Balloc+0x78>) + 8008ed8: 4818 ldr r0, [pc, #96] @ (8008f3c <_Balloc+0x7c>) + 8008eda: 216b movs r1, #107 @ 0x6b + 8008edc: f000 ff7c bl 8009dd8 <__assert_func> + 8008ee0: e9c0 6601 strd r6, r6, [r0, #4] + 8008ee4: 6006 str r6, [r0, #0] + 8008ee6: 60c6 str r6, [r0, #12] + 8008ee8: 69e6 ldr r6, [r4, #28] + 8008eea: 68f3 ldr r3, [r6, #12] + 8008eec: b183 cbz r3, 8008f10 <_Balloc+0x50> + 8008eee: 69e3 ldr r3, [r4, #28] + 8008ef0: 68db ldr r3, [r3, #12] + 8008ef2: f853 0025 ldr.w r0, [r3, r5, lsl #2] + 8008ef6: b9b8 cbnz r0, 8008f28 <_Balloc+0x68> + 8008ef8: 2101 movs r1, #1 + 8008efa: fa01 f605 lsl.w r6, r1, r5 + 8008efe: 1d72 adds r2, r6, #5 + 8008f00: 0092 lsls r2, r2, #2 + 8008f02: 4620 mov r0, r4 + 8008f04: f000 ff86 bl 8009e14 <_calloc_r> + 8008f08: b160 cbz r0, 8008f24 <_Balloc+0x64> + 8008f0a: e9c0 5601 strd r5, r6, [r0, #4] + 8008f0e: e00e b.n 8008f2e <_Balloc+0x6e> + 8008f10: 2221 movs r2, #33 @ 0x21 + 8008f12: 2104 movs r1, #4 + 8008f14: 4620 mov r0, r4 + 8008f16: f000 ff7d bl 8009e14 <_calloc_r> + 8008f1a: 69e3 ldr r3, [r4, #28] + 8008f1c: 60f0 str r0, [r6, #12] + 8008f1e: 68db ldr r3, [r3, #12] + 8008f20: 2b00 cmp r3, #0 + 8008f22: d1e4 bne.n 8008eee <_Balloc+0x2e> + 8008f24: 2000 movs r0, #0 + 8008f26: bd70 pop {r4, r5, r6, pc} + 8008f28: 6802 ldr r2, [r0, #0] + 8008f2a: f843 2025 str.w r2, [r3, r5, lsl #2] + 8008f2e: 2300 movs r3, #0 + 8008f30: e9c0 3303 strd r3, r3, [r0, #12] + 8008f34: e7f7 b.n 8008f26 <_Balloc+0x66> + 8008f36: bf00 nop + 8008f38: 0800b97d .word 0x0800b97d + 8008f3c: 0800b9fd .word 0x0800b9fd + +08008f40 <_Bfree>: + 8008f40: b570 push {r4, r5, r6, lr} + 8008f42: 69c6 ldr r6, [r0, #28] + 8008f44: 4605 mov r5, r0 + 8008f46: 460c mov r4, r1 + 8008f48: b976 cbnz r6, 8008f68 <_Bfree+0x28> + 8008f4a: 2010 movs r0, #16 + 8008f4c: f7ff ff02 bl 8008d54 + 8008f50: 4602 mov r2, r0 + 8008f52: 61e8 str r0, [r5, #28] + 8008f54: b920 cbnz r0, 8008f60 <_Bfree+0x20> + 8008f56: 4b09 ldr r3, [pc, #36] @ (8008f7c <_Bfree+0x3c>) + 8008f58: 4809 ldr r0, [pc, #36] @ (8008f80 <_Bfree+0x40>) + 8008f5a: 218f movs r1, #143 @ 0x8f + 8008f5c: f000 ff3c bl 8009dd8 <__assert_func> + 8008f60: e9c0 6601 strd r6, r6, [r0, #4] + 8008f64: 6006 str r6, [r0, #0] + 8008f66: 60c6 str r6, [r0, #12] + 8008f68: b13c cbz r4, 8008f7a <_Bfree+0x3a> + 8008f6a: 69eb ldr r3, [r5, #28] + 8008f6c: 6862 ldr r2, [r4, #4] + 8008f6e: 68db ldr r3, [r3, #12] + 8008f70: f853 1022 ldr.w r1, [r3, r2, lsl #2] + 8008f74: 6021 str r1, [r4, #0] + 8008f76: f843 4022 str.w r4, [r3, r2, lsl #2] + 8008f7a: bd70 pop {r4, r5, r6, pc} + 8008f7c: 0800b97d .word 0x0800b97d + 8008f80: 0800b9fd .word 0x0800b9fd + +08008f84 <__multadd>: + 8008f84: e92d 41f0 stmdb sp!, {r4, r5, r6, r7, r8, lr} + 8008f88: 690d ldr r5, [r1, #16] + 8008f8a: 4607 mov r7, r0 + 8008f8c: 460c mov r4, r1 + 8008f8e: 461e mov r6, r3 + 8008f90: f101 0c14 add.w ip, r1, #20 + 8008f94: 2000 movs r0, #0 + 8008f96: f8dc 3000 ldr.w r3, [ip] + 8008f9a: b299 uxth r1, r3 + 8008f9c: fb02 6101 mla r1, r2, r1, r6 + 8008fa0: 0c1e lsrs r6, r3, #16 + 8008fa2: 0c0b lsrs r3, r1, #16 + 8008fa4: fb02 3306 mla r3, r2, r6, r3 + 8008fa8: b289 uxth r1, r1 + 8008faa: 3001 adds r0, #1 + 8008fac: eb01 4103 add.w r1, r1, r3, lsl #16 + 8008fb0: 4285 cmp r5, r0 + 8008fb2: f84c 1b04 str.w r1, [ip], #4 + 8008fb6: ea4f 4613 mov.w r6, r3, lsr #16 + 8008fba: dcec bgt.n 8008f96 <__multadd+0x12> + 8008fbc: b30e cbz r6, 8009002 <__multadd+0x7e> + 8008fbe: 68a3 ldr r3, [r4, #8] + 8008fc0: 42ab cmp r3, r5 + 8008fc2: dc19 bgt.n 8008ff8 <__multadd+0x74> + 8008fc4: 6861 ldr r1, [r4, #4] + 8008fc6: 4638 mov r0, r7 + 8008fc8: 3101 adds r1, #1 + 8008fca: f7ff ff79 bl 8008ec0 <_Balloc> + 8008fce: 4680 mov r8, r0 + 8008fd0: b928 cbnz r0, 8008fde <__multadd+0x5a> + 8008fd2: 4602 mov r2, r0 + 8008fd4: 4b0c ldr r3, [pc, #48] @ (8009008 <__multadd+0x84>) + 8008fd6: 480d ldr r0, [pc, #52] @ (800900c <__multadd+0x88>) + 8008fd8: 21ba movs r1, #186 @ 0xba + 8008fda: f000 fefd bl 8009dd8 <__assert_func> + 8008fde: 6922 ldr r2, [r4, #16] + 8008fe0: 3202 adds r2, #2 + 8008fe2: f104 010c add.w r1, r4, #12 + 8008fe6: 0092 lsls r2, r2, #2 + 8008fe8: 300c adds r0, #12 + 8008fea: f000 fee7 bl 8009dbc + 8008fee: 4621 mov r1, r4 + 8008ff0: 4638 mov r0, r7 + 8008ff2: f7ff ffa5 bl 8008f40 <_Bfree> + 8008ff6: 4644 mov r4, r8 + 8008ff8: eb04 0385 add.w r3, r4, r5, lsl #2 + 8008ffc: 3501 adds r5, #1 + 8008ffe: 615e str r6, [r3, #20] + 8009000: 6125 str r5, [r4, #16] + 8009002: 4620 mov r0, r4 + 8009004: e8bd 81f0 ldmia.w sp!, {r4, r5, r6, r7, r8, pc} + 8009008: 0800b9ec .word 0x0800b9ec + 800900c: 0800b9fd .word 0x0800b9fd + +08009010 <__hi0bits>: + 8009010: f5b0 3f80 cmp.w r0, #65536 @ 0x10000 + 8009014: 4603 mov r3, r0 + 8009016: bf36 itet cc + 8009018: 0403 lslcc r3, r0, #16 + 800901a: 2000 movcs r0, #0 + 800901c: 2010 movcc r0, #16 + 800901e: f1b3 7f80 cmp.w r3, #16777216 @ 0x1000000 + 8009022: bf3c itt cc + 8009024: 021b lslcc r3, r3, #8 + 8009026: 3008 addcc r0, #8 + 8009028: f1b3 5f80 cmp.w r3, #268435456 @ 0x10000000 + 800902c: bf3c itt cc + 800902e: 011b lslcc r3, r3, #4 + 8009030: 3004 addcc r0, #4 + 8009032: f1b3 4f80 cmp.w r3, #1073741824 @ 0x40000000 + 8009036: bf3c itt cc + 8009038: 009b lslcc r3, r3, #2 + 800903a: 3002 addcc r0, #2 + 800903c: 2b00 cmp r3, #0 + 800903e: db05 blt.n 800904c <__hi0bits+0x3c> + 8009040: f013 4f80 tst.w r3, #1073741824 @ 0x40000000 + 8009044: f100 0001 add.w r0, r0, #1 + 8009048: bf08 it eq + 800904a: 2020 moveq r0, #32 + 800904c: 4770 bx lr + +0800904e <__lo0bits>: + 800904e: 6803 ldr r3, [r0, #0] + 8009050: 4602 mov r2, r0 + 8009052: f013 0007 ands.w r0, r3, #7 + 8009056: d00b beq.n 8009070 <__lo0bits+0x22> + 8009058: 07d9 lsls r1, r3, #31 + 800905a: d421 bmi.n 80090a0 <__lo0bits+0x52> + 800905c: 0798 lsls r0, r3, #30 + 800905e: bf49 itett mi + 8009060: 085b lsrmi r3, r3, #1 + 8009062: 089b lsrpl r3, r3, #2 + 8009064: 2001 movmi r0, #1 + 8009066: 6013 strmi r3, [r2, #0] + 8009068: bf5c itt pl + 800906a: 6013 strpl r3, [r2, #0] + 800906c: 2002 movpl r0, #2 + 800906e: 4770 bx lr + 8009070: b299 uxth r1, r3 + 8009072: b909 cbnz r1, 8009078 <__lo0bits+0x2a> + 8009074: 0c1b lsrs r3, r3, #16 + 8009076: 2010 movs r0, #16 + 8009078: b2d9 uxtb r1, r3 + 800907a: b909 cbnz r1, 8009080 <__lo0bits+0x32> + 800907c: 3008 adds r0, #8 + 800907e: 0a1b lsrs r3, r3, #8 + 8009080: 0719 lsls r1, r3, #28 + 8009082: bf04 itt eq + 8009084: 091b lsreq r3, r3, #4 + 8009086: 3004 addeq r0, #4 + 8009088: 0799 lsls r1, r3, #30 + 800908a: bf04 itt eq + 800908c: 089b lsreq r3, r3, #2 + 800908e: 3002 addeq r0, #2 + 8009090: 07d9 lsls r1, r3, #31 + 8009092: d403 bmi.n 800909c <__lo0bits+0x4e> + 8009094: 085b lsrs r3, r3, #1 + 8009096: f100 0001 add.w r0, r0, #1 + 800909a: d003 beq.n 80090a4 <__lo0bits+0x56> + 800909c: 6013 str r3, [r2, #0] + 800909e: 4770 bx lr + 80090a0: 2000 movs r0, #0 + 80090a2: 4770 bx lr + 80090a4: 2020 movs r0, #32 + 80090a6: 4770 bx lr + +080090a8 <__i2b>: + 80090a8: b510 push {r4, lr} + 80090aa: 460c mov r4, r1 + 80090ac: 2101 movs r1, #1 + 80090ae: f7ff ff07 bl 8008ec0 <_Balloc> + 80090b2: 4602 mov r2, r0 + 80090b4: b928 cbnz r0, 80090c2 <__i2b+0x1a> + 80090b6: 4b05 ldr r3, [pc, #20] @ (80090cc <__i2b+0x24>) + 80090b8: 4805 ldr r0, [pc, #20] @ (80090d0 <__i2b+0x28>) + 80090ba: f240 1145 movw r1, #325 @ 0x145 + 80090be: f000 fe8b bl 8009dd8 <__assert_func> + 80090c2: 2301 movs r3, #1 + 80090c4: 6144 str r4, [r0, #20] + 80090c6: 6103 str r3, [r0, #16] + 80090c8: bd10 pop {r4, pc} + 80090ca: bf00 nop + 80090cc: 0800b9ec .word 0x0800b9ec + 80090d0: 0800b9fd .word 0x0800b9fd + +080090d4 <__multiply>: + 80090d4: e92d 4ff0 stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, fp, lr} + 80090d8: 4617 mov r7, r2 + 80090da: 690a ldr r2, [r1, #16] + 80090dc: 693b ldr r3, [r7, #16] + 80090de: 429a cmp r2, r3 + 80090e0: bfa8 it ge + 80090e2: 463b movge r3, r7 + 80090e4: 4689 mov r9, r1 + 80090e6: bfa4 itt ge + 80090e8: 460f movge r7, r1 + 80090ea: 4699 movge r9, r3 + 80090ec: 693d ldr r5, [r7, #16] + 80090ee: f8d9 a010 ldr.w sl, [r9, #16] + 80090f2: 68bb ldr r3, [r7, #8] + 80090f4: 6879 ldr r1, [r7, #4] + 80090f6: eb05 060a add.w r6, r5, sl + 80090fa: 42b3 cmp r3, r6 + 80090fc: b085 sub sp, #20 + 80090fe: bfb8 it lt + 8009100: 3101 addlt r1, #1 + 8009102: f7ff fedd bl 8008ec0 <_Balloc> + 8009106: b930 cbnz r0, 8009116 <__multiply+0x42> + 8009108: 4602 mov r2, r0 + 800910a: 4b41 ldr r3, [pc, #260] @ (8009210 <__multiply+0x13c>) + 800910c: 4841 ldr r0, [pc, #260] @ (8009214 <__multiply+0x140>) + 800910e: f44f 71b1 mov.w r1, #354 @ 0x162 + 8009112: f000 fe61 bl 8009dd8 <__assert_func> + 8009116: f100 0414 add.w r4, r0, #20 + 800911a: eb04 0e86 add.w lr, r4, r6, lsl #2 + 800911e: 4623 mov r3, r4 + 8009120: 2200 movs r2, #0 + 8009122: 4573 cmp r3, lr + 8009124: d320 bcc.n 8009168 <__multiply+0x94> + 8009126: f107 0814 add.w r8, r7, #20 + 800912a: f109 0114 add.w r1, r9, #20 + 800912e: eb08 0585 add.w r5, r8, r5, lsl #2 + 8009132: eb01 038a add.w r3, r1, sl, lsl #2 + 8009136: 9302 str r3, [sp, #8] + 8009138: 1beb subs r3, r5, r7 + 800913a: 3b15 subs r3, #21 + 800913c: f023 0303 bic.w r3, r3, #3 + 8009140: 3304 adds r3, #4 + 8009142: 3715 adds r7, #21 + 8009144: 42bd cmp r5, r7 + 8009146: bf38 it cc + 8009148: 2304 movcc r3, #4 + 800914a: 9301 str r3, [sp, #4] + 800914c: 9b02 ldr r3, [sp, #8] + 800914e: 9103 str r1, [sp, #12] + 8009150: 428b cmp r3, r1 + 8009152: d80c bhi.n 800916e <__multiply+0x9a> + 8009154: 2e00 cmp r6, #0 + 8009156: dd03 ble.n 8009160 <__multiply+0x8c> + 8009158: f85e 3d04 ldr.w r3, [lr, #-4]! + 800915c: 2b00 cmp r3, #0 + 800915e: d055 beq.n 800920c <__multiply+0x138> + 8009160: 6106 str r6, [r0, #16] + 8009162: b005 add sp, #20 + 8009164: e8bd 8ff0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, fp, pc} + 8009168: f843 2b04 str.w r2, [r3], #4 + 800916c: e7d9 b.n 8009122 <__multiply+0x4e> + 800916e: f8b1 a000 ldrh.w sl, [r1] + 8009172: f1ba 0f00 cmp.w sl, #0 + 8009176: d01f beq.n 80091b8 <__multiply+0xe4> + 8009178: 46c4 mov ip, r8 + 800917a: 46a1 mov r9, r4 + 800917c: 2700 movs r7, #0 + 800917e: f85c 2b04 ldr.w r2, [ip], #4 + 8009182: f8d9 3000 ldr.w r3, [r9] + 8009186: fa1f fb82 uxth.w fp, r2 + 800918a: b29b uxth r3, r3 + 800918c: fb0a 330b mla r3, sl, fp, r3 + 8009190: 443b add r3, r7 + 8009192: f8d9 7000 ldr.w r7, [r9] + 8009196: 0c12 lsrs r2, r2, #16 + 8009198: 0c3f lsrs r7, r7, #16 + 800919a: fb0a 7202 mla r2, sl, r2, r7 + 800919e: eb02 4213 add.w r2, r2, r3, lsr #16 + 80091a2: b29b uxth r3, r3 + 80091a4: ea43 4302 orr.w r3, r3, r2, lsl #16 + 80091a8: 4565 cmp r5, ip + 80091aa: f849 3b04 str.w r3, [r9], #4 + 80091ae: ea4f 4712 mov.w r7, r2, lsr #16 + 80091b2: d8e4 bhi.n 800917e <__multiply+0xaa> + 80091b4: 9b01 ldr r3, [sp, #4] + 80091b6: 50e7 str r7, [r4, r3] + 80091b8: 9b03 ldr r3, [sp, #12] + 80091ba: f8b3 9002 ldrh.w r9, [r3, #2] + 80091be: 3104 adds r1, #4 + 80091c0: f1b9 0f00 cmp.w r9, #0 + 80091c4: d020 beq.n 8009208 <__multiply+0x134> + 80091c6: 6823 ldr r3, [r4, #0] + 80091c8: 4647 mov r7, r8 + 80091ca: 46a4 mov ip, r4 + 80091cc: f04f 0a00 mov.w sl, #0 + 80091d0: f8b7 b000 ldrh.w fp, [r7] + 80091d4: f8bc 2002 ldrh.w r2, [ip, #2] + 80091d8: fb09 220b mla r2, r9, fp, r2 + 80091dc: 4452 add r2, sl + 80091de: b29b uxth r3, r3 + 80091e0: ea43 4302 orr.w r3, r3, r2, lsl #16 + 80091e4: f84c 3b04 str.w r3, [ip], #4 + 80091e8: f857 3b04 ldr.w r3, [r7], #4 + 80091ec: ea4f 4a13 mov.w sl, r3, lsr #16 + 80091f0: f8bc 3000 ldrh.w r3, [ip] + 80091f4: fb09 330a mla r3, r9, sl, r3 + 80091f8: eb03 4312 add.w r3, r3, r2, lsr #16 + 80091fc: 42bd cmp r5, r7 + 80091fe: ea4f 4a13 mov.w sl, r3, lsr #16 + 8009202: d8e5 bhi.n 80091d0 <__multiply+0xfc> + 8009204: 9a01 ldr r2, [sp, #4] + 8009206: 50a3 str r3, [r4, r2] + 8009208: 3404 adds r4, #4 + 800920a: e79f b.n 800914c <__multiply+0x78> + 800920c: 3e01 subs r6, #1 + 800920e: e7a1 b.n 8009154 <__multiply+0x80> + 8009210: 0800b9ec .word 0x0800b9ec + 8009214: 0800b9fd .word 0x0800b9fd + +08009218 <__pow5mult>: + 8009218: e92d 43f8 stmdb sp!, {r3, r4, r5, r6, r7, r8, r9, lr} + 800921c: 4615 mov r5, r2 + 800921e: f012 0203 ands.w r2, r2, #3 + 8009222: 4607 mov r7, r0 + 8009224: 460e mov r6, r1 + 8009226: d007 beq.n 8009238 <__pow5mult+0x20> + 8009228: 4c25 ldr r4, [pc, #148] @ (80092c0 <__pow5mult+0xa8>) + 800922a: 3a01 subs r2, #1 + 800922c: 2300 movs r3, #0 + 800922e: f854 2022 ldr.w r2, [r4, r2, lsl #2] + 8009232: f7ff fea7 bl 8008f84 <__multadd> + 8009236: 4606 mov r6, r0 + 8009238: 10ad asrs r5, r5, #2 + 800923a: d03d beq.n 80092b8 <__pow5mult+0xa0> + 800923c: 69fc ldr r4, [r7, #28] + 800923e: b97c cbnz r4, 8009260 <__pow5mult+0x48> + 8009240: 2010 movs r0, #16 + 8009242: f7ff fd87 bl 8008d54 + 8009246: 4602 mov r2, r0 + 8009248: 61f8 str r0, [r7, #28] + 800924a: b928 cbnz r0, 8009258 <__pow5mult+0x40> + 800924c: 4b1d ldr r3, [pc, #116] @ (80092c4 <__pow5mult+0xac>) + 800924e: 481e ldr r0, [pc, #120] @ (80092c8 <__pow5mult+0xb0>) + 8009250: f240 11b3 movw r1, #435 @ 0x1b3 + 8009254: f000 fdc0 bl 8009dd8 <__assert_func> + 8009258: e9c0 4401 strd r4, r4, [r0, #4] + 800925c: 6004 str r4, [r0, #0] + 800925e: 60c4 str r4, [r0, #12] + 8009260: f8d7 801c ldr.w r8, [r7, #28] + 8009264: f8d8 4008 ldr.w r4, [r8, #8] + 8009268: b94c cbnz r4, 800927e <__pow5mult+0x66> + 800926a: f240 2171 movw r1, #625 @ 0x271 + 800926e: 4638 mov r0, r7 + 8009270: f7ff ff1a bl 80090a8 <__i2b> + 8009274: 2300 movs r3, #0 + 8009276: f8c8 0008 str.w r0, [r8, #8] + 800927a: 4604 mov r4, r0 + 800927c: 6003 str r3, [r0, #0] + 800927e: f04f 0900 mov.w r9, #0 + 8009282: 07eb lsls r3, r5, #31 + 8009284: d50a bpl.n 800929c <__pow5mult+0x84> + 8009286: 4631 mov r1, r6 + 8009288: 4622 mov r2, r4 + 800928a: 4638 mov r0, r7 + 800928c: f7ff ff22 bl 80090d4 <__multiply> + 8009290: 4631 mov r1, r6 + 8009292: 4680 mov r8, r0 + 8009294: 4638 mov r0, r7 + 8009296: f7ff fe53 bl 8008f40 <_Bfree> + 800929a: 4646 mov r6, r8 + 800929c: 106d asrs r5, r5, #1 + 800929e: d00b beq.n 80092b8 <__pow5mult+0xa0> + 80092a0: 6820 ldr r0, [r4, #0] + 80092a2: b938 cbnz r0, 80092b4 <__pow5mult+0x9c> + 80092a4: 4622 mov r2, r4 + 80092a6: 4621 mov r1, r4 + 80092a8: 4638 mov r0, r7 + 80092aa: f7ff ff13 bl 80090d4 <__multiply> + 80092ae: 6020 str r0, [r4, #0] + 80092b0: f8c0 9000 str.w r9, [r0] + 80092b4: 4604 mov r4, r0 + 80092b6: e7e4 b.n 8009282 <__pow5mult+0x6a> + 80092b8: 4630 mov r0, r6 + 80092ba: e8bd 83f8 ldmia.w sp!, {r3, r4, r5, r6, r7, r8, r9, pc} + 80092be: bf00 nop + 80092c0: 0800bab0 .word 0x0800bab0 + 80092c4: 0800b97d .word 0x0800b97d + 80092c8: 0800b9fd .word 0x0800b9fd + +080092cc <__lshift>: + 80092cc: e92d 47f0 stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, lr} + 80092d0: 460c mov r4, r1 + 80092d2: 6849 ldr r1, [r1, #4] + 80092d4: 6923 ldr r3, [r4, #16] + 80092d6: eb03 1862 add.w r8, r3, r2, asr #5 + 80092da: 68a3 ldr r3, [r4, #8] + 80092dc: 4607 mov r7, r0 + 80092de: 4691 mov r9, r2 + 80092e0: ea4f 1a62 mov.w sl, r2, asr #5 + 80092e4: f108 0601 add.w r6, r8, #1 + 80092e8: 42b3 cmp r3, r6 + 80092ea: db0b blt.n 8009304 <__lshift+0x38> + 80092ec: 4638 mov r0, r7 + 80092ee: f7ff fde7 bl 8008ec0 <_Balloc> + 80092f2: 4605 mov r5, r0 + 80092f4: b948 cbnz r0, 800930a <__lshift+0x3e> + 80092f6: 4602 mov r2, r0 + 80092f8: 4b28 ldr r3, [pc, #160] @ (800939c <__lshift+0xd0>) + 80092fa: 4829 ldr r0, [pc, #164] @ (80093a0 <__lshift+0xd4>) + 80092fc: f44f 71ef mov.w r1, #478 @ 0x1de + 8009300: f000 fd6a bl 8009dd8 <__assert_func> + 8009304: 3101 adds r1, #1 + 8009306: 005b lsls r3, r3, #1 + 8009308: e7ee b.n 80092e8 <__lshift+0x1c> + 800930a: 2300 movs r3, #0 + 800930c: f100 0114 add.w r1, r0, #20 + 8009310: f100 0210 add.w r2, r0, #16 + 8009314: 4618 mov r0, r3 + 8009316: 4553 cmp r3, sl + 8009318: db33 blt.n 8009382 <__lshift+0xb6> + 800931a: 6920 ldr r0, [r4, #16] + 800931c: ea2a 7aea bic.w sl, sl, sl, asr #31 + 8009320: f104 0314 add.w r3, r4, #20 + 8009324: f019 091f ands.w r9, r9, #31 + 8009328: eb01 018a add.w r1, r1, sl, lsl #2 + 800932c: eb03 0c80 add.w ip, r3, r0, lsl #2 + 8009330: d02b beq.n 800938a <__lshift+0xbe> + 8009332: f1c9 0e20 rsb lr, r9, #32 + 8009336: 468a mov sl, r1 + 8009338: 2200 movs r2, #0 + 800933a: 6818 ldr r0, [r3, #0] + 800933c: fa00 f009 lsl.w r0, r0, r9 + 8009340: 4310 orrs r0, r2 + 8009342: f84a 0b04 str.w r0, [sl], #4 + 8009346: f853 2b04 ldr.w r2, [r3], #4 + 800934a: 459c cmp ip, r3 + 800934c: fa22 f20e lsr.w r2, r2, lr + 8009350: d8f3 bhi.n 800933a <__lshift+0x6e> + 8009352: ebac 0304 sub.w r3, ip, r4 + 8009356: 3b15 subs r3, #21 + 8009358: f023 0303 bic.w r3, r3, #3 + 800935c: 3304 adds r3, #4 + 800935e: f104 0015 add.w r0, r4, #21 + 8009362: 4560 cmp r0, ip + 8009364: bf88 it hi + 8009366: 2304 movhi r3, #4 + 8009368: 50ca str r2, [r1, r3] + 800936a: b10a cbz r2, 8009370 <__lshift+0xa4> + 800936c: f108 0602 add.w r6, r8, #2 + 8009370: 3e01 subs r6, #1 + 8009372: 4638 mov r0, r7 + 8009374: 612e str r6, [r5, #16] + 8009376: 4621 mov r1, r4 + 8009378: f7ff fde2 bl 8008f40 <_Bfree> + 800937c: 4628 mov r0, r5 + 800937e: e8bd 87f0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, pc} + 8009382: f842 0f04 str.w r0, [r2, #4]! + 8009386: 3301 adds r3, #1 + 8009388: e7c5 b.n 8009316 <__lshift+0x4a> + 800938a: 3904 subs r1, #4 + 800938c: f853 2b04 ldr.w r2, [r3], #4 + 8009390: f841 2f04 str.w r2, [r1, #4]! + 8009394: 459c cmp ip, r3 + 8009396: d8f9 bhi.n 800938c <__lshift+0xc0> + 8009398: e7ea b.n 8009370 <__lshift+0xa4> + 800939a: bf00 nop + 800939c: 0800b9ec .word 0x0800b9ec + 80093a0: 0800b9fd .word 0x0800b9fd + +080093a4 <__mcmp>: + 80093a4: 690a ldr r2, [r1, #16] + 80093a6: 4603 mov r3, r0 + 80093a8: 6900 ldr r0, [r0, #16] + 80093aa: 1a80 subs r0, r0, r2 + 80093ac: b530 push {r4, r5, lr} + 80093ae: d10e bne.n 80093ce <__mcmp+0x2a> + 80093b0: 3314 adds r3, #20 + 80093b2: 3114 adds r1, #20 + 80093b4: eb03 0482 add.w r4, r3, r2, lsl #2 + 80093b8: eb01 0182 add.w r1, r1, r2, lsl #2 + 80093bc: f854 5d04 ldr.w r5, [r4, #-4]! + 80093c0: f851 2d04 ldr.w r2, [r1, #-4]! + 80093c4: 4295 cmp r5, r2 + 80093c6: d003 beq.n 80093d0 <__mcmp+0x2c> + 80093c8: d205 bcs.n 80093d6 <__mcmp+0x32> + 80093ca: f04f 30ff mov.w r0, #4294967295 + 80093ce: bd30 pop {r4, r5, pc} + 80093d0: 42a3 cmp r3, r4 + 80093d2: d3f3 bcc.n 80093bc <__mcmp+0x18> + 80093d4: e7fb b.n 80093ce <__mcmp+0x2a> + 80093d6: 2001 movs r0, #1 + 80093d8: e7f9 b.n 80093ce <__mcmp+0x2a> + ... + +080093dc <__mdiff>: + 80093dc: e92d 4ff7 stmdb sp!, {r0, r1, r2, r4, r5, r6, r7, r8, r9, sl, fp, lr} + 80093e0: 4689 mov r9, r1 + 80093e2: 4606 mov r6, r0 + 80093e4: 4611 mov r1, r2 + 80093e6: 4648 mov r0, r9 + 80093e8: 4614 mov r4, r2 + 80093ea: f7ff ffdb bl 80093a4 <__mcmp> + 80093ee: 1e05 subs r5, r0, #0 + 80093f0: d112 bne.n 8009418 <__mdiff+0x3c> + 80093f2: 4629 mov r1, r5 + 80093f4: 4630 mov r0, r6 + 80093f6: f7ff fd63 bl 8008ec0 <_Balloc> + 80093fa: 4602 mov r2, r0 + 80093fc: b928 cbnz r0, 800940a <__mdiff+0x2e> + 80093fe: 4b3f ldr r3, [pc, #252] @ (80094fc <__mdiff+0x120>) + 8009400: f240 2137 movw r1, #567 @ 0x237 + 8009404: 483e ldr r0, [pc, #248] @ (8009500 <__mdiff+0x124>) + 8009406: f000 fce7 bl 8009dd8 <__assert_func> + 800940a: 2301 movs r3, #1 + 800940c: e9c0 3504 strd r3, r5, [r0, #16] + 8009410: 4610 mov r0, r2 + 8009412: b003 add sp, #12 + 8009414: e8bd 8ff0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, fp, pc} + 8009418: bfbc itt lt + 800941a: 464b movlt r3, r9 + 800941c: 46a1 movlt r9, r4 + 800941e: 4630 mov r0, r6 + 8009420: f8d9 1004 ldr.w r1, [r9, #4] + 8009424: bfba itte lt + 8009426: 461c movlt r4, r3 + 8009428: 2501 movlt r5, #1 + 800942a: 2500 movge r5, #0 + 800942c: f7ff fd48 bl 8008ec0 <_Balloc> + 8009430: 4602 mov r2, r0 + 8009432: b918 cbnz r0, 800943c <__mdiff+0x60> + 8009434: 4b31 ldr r3, [pc, #196] @ (80094fc <__mdiff+0x120>) + 8009436: f240 2145 movw r1, #581 @ 0x245 + 800943a: e7e3 b.n 8009404 <__mdiff+0x28> + 800943c: f8d9 7010 ldr.w r7, [r9, #16] + 8009440: 6926 ldr r6, [r4, #16] + 8009442: 60c5 str r5, [r0, #12] + 8009444: f109 0310 add.w r3, r9, #16 + 8009448: f109 0514 add.w r5, r9, #20 + 800944c: f104 0e14 add.w lr, r4, #20 + 8009450: f100 0b14 add.w fp, r0, #20 + 8009454: eb05 0887 add.w r8, r5, r7, lsl #2 + 8009458: eb0e 0686 add.w r6, lr, r6, lsl #2 + 800945c: 9301 str r3, [sp, #4] + 800945e: 46d9 mov r9, fp + 8009460: f04f 0c00 mov.w ip, #0 + 8009464: 9b01 ldr r3, [sp, #4] + 8009466: f85e 0b04 ldr.w r0, [lr], #4 + 800946a: f853 af04 ldr.w sl, [r3, #4]! + 800946e: 9301 str r3, [sp, #4] + 8009470: fa1f f38a uxth.w r3, sl + 8009474: 4619 mov r1, r3 + 8009476: b283 uxth r3, r0 + 8009478: 1acb subs r3, r1, r3 + 800947a: 0c00 lsrs r0, r0, #16 + 800947c: 4463 add r3, ip + 800947e: ebc0 401a rsb r0, r0, sl, lsr #16 + 8009482: eb00 4023 add.w r0, r0, r3, asr #16 + 8009486: b29b uxth r3, r3 + 8009488: ea43 4300 orr.w r3, r3, r0, lsl #16 + 800948c: 4576 cmp r6, lr + 800948e: f849 3b04 str.w r3, [r9], #4 + 8009492: ea4f 4c20 mov.w ip, r0, asr #16 + 8009496: d8e5 bhi.n 8009464 <__mdiff+0x88> + 8009498: 1b33 subs r3, r6, r4 + 800949a: 3b15 subs r3, #21 + 800949c: f023 0303 bic.w r3, r3, #3 + 80094a0: 3415 adds r4, #21 + 80094a2: 3304 adds r3, #4 + 80094a4: 42a6 cmp r6, r4 + 80094a6: bf38 it cc + 80094a8: 2304 movcc r3, #4 + 80094aa: 441d add r5, r3 + 80094ac: 445b add r3, fp + 80094ae: 461e mov r6, r3 + 80094b0: 462c mov r4, r5 + 80094b2: 4544 cmp r4, r8 + 80094b4: d30e bcc.n 80094d4 <__mdiff+0xf8> + 80094b6: f108 0103 add.w r1, r8, #3 + 80094ba: 1b49 subs r1, r1, r5 + 80094bc: f021 0103 bic.w r1, r1, #3 + 80094c0: 3d03 subs r5, #3 + 80094c2: 45a8 cmp r8, r5 + 80094c4: bf38 it cc + 80094c6: 2100 movcc r1, #0 + 80094c8: 440b add r3, r1 + 80094ca: f853 1d04 ldr.w r1, [r3, #-4]! + 80094ce: b191 cbz r1, 80094f6 <__mdiff+0x11a> + 80094d0: 6117 str r7, [r2, #16] + 80094d2: e79d b.n 8009410 <__mdiff+0x34> + 80094d4: f854 1b04 ldr.w r1, [r4], #4 + 80094d8: 46e6 mov lr, ip + 80094da: 0c08 lsrs r0, r1, #16 + 80094dc: fa1c fc81 uxtah ip, ip, r1 + 80094e0: 4471 add r1, lr + 80094e2: eb00 402c add.w r0, r0, ip, asr #16 + 80094e6: b289 uxth r1, r1 + 80094e8: ea41 4100 orr.w r1, r1, r0, lsl #16 + 80094ec: f846 1b04 str.w r1, [r6], #4 + 80094f0: ea4f 4c20 mov.w ip, r0, asr #16 + 80094f4: e7dd b.n 80094b2 <__mdiff+0xd6> + 80094f6: 3f01 subs r7, #1 + 80094f8: e7e7 b.n 80094ca <__mdiff+0xee> + 80094fa: bf00 nop + 80094fc: 0800b9ec .word 0x0800b9ec + 8009500: 0800b9fd .word 0x0800b9fd + +08009504 <__d2b>: + 8009504: e92d 43f7 stmdb sp!, {r0, r1, r2, r4, r5, r6, r7, r8, r9, lr} + 8009508: 460f mov r7, r1 + 800950a: 2101 movs r1, #1 + 800950c: ec59 8b10 vmov r8, r9, d0 + 8009510: 4616 mov r6, r2 + 8009512: f7ff fcd5 bl 8008ec0 <_Balloc> + 8009516: 4604 mov r4, r0 + 8009518: b930 cbnz r0, 8009528 <__d2b+0x24> + 800951a: 4602 mov r2, r0 + 800951c: 4b23 ldr r3, [pc, #140] @ (80095ac <__d2b+0xa8>) + 800951e: 4824 ldr r0, [pc, #144] @ (80095b0 <__d2b+0xac>) + 8009520: f240 310f movw r1, #783 @ 0x30f + 8009524: f000 fc58 bl 8009dd8 <__assert_func> + 8009528: f3c9 550a ubfx r5, r9, #20, #11 + 800952c: f3c9 0313 ubfx r3, r9, #0, #20 + 8009530: b10d cbz r5, 8009536 <__d2b+0x32> + 8009532: f443 1380 orr.w r3, r3, #1048576 @ 0x100000 + 8009536: 9301 str r3, [sp, #4] + 8009538: f1b8 0300 subs.w r3, r8, #0 + 800953c: d023 beq.n 8009586 <__d2b+0x82> + 800953e: 4668 mov r0, sp + 8009540: 9300 str r3, [sp, #0] + 8009542: f7ff fd84 bl 800904e <__lo0bits> + 8009546: e9dd 1200 ldrd r1, r2, [sp] + 800954a: b1d0 cbz r0, 8009582 <__d2b+0x7e> + 800954c: f1c0 0320 rsb r3, r0, #32 + 8009550: fa02 f303 lsl.w r3, r2, r3 + 8009554: 430b orrs r3, r1 + 8009556: 40c2 lsrs r2, r0 + 8009558: 6163 str r3, [r4, #20] + 800955a: 9201 str r2, [sp, #4] + 800955c: 9b01 ldr r3, [sp, #4] + 800955e: 61a3 str r3, [r4, #24] + 8009560: 2b00 cmp r3, #0 + 8009562: bf0c ite eq + 8009564: 2201 moveq r2, #1 + 8009566: 2202 movne r2, #2 + 8009568: 6122 str r2, [r4, #16] + 800956a: b1a5 cbz r5, 8009596 <__d2b+0x92> + 800956c: f2a5 4533 subw r5, r5, #1075 @ 0x433 + 8009570: 4405 add r5, r0 + 8009572: 603d str r5, [r7, #0] + 8009574: f1c0 0035 rsb r0, r0, #53 @ 0x35 + 8009578: 6030 str r0, [r6, #0] + 800957a: 4620 mov r0, r4 + 800957c: b003 add sp, #12 + 800957e: e8bd 83f0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, pc} + 8009582: 6161 str r1, [r4, #20] + 8009584: e7ea b.n 800955c <__d2b+0x58> + 8009586: a801 add r0, sp, #4 + 8009588: f7ff fd61 bl 800904e <__lo0bits> + 800958c: 9b01 ldr r3, [sp, #4] + 800958e: 6163 str r3, [r4, #20] + 8009590: 3020 adds r0, #32 + 8009592: 2201 movs r2, #1 + 8009594: e7e8 b.n 8009568 <__d2b+0x64> + 8009596: eb04 0382 add.w r3, r4, r2, lsl #2 + 800959a: f2a0 4032 subw r0, r0, #1074 @ 0x432 + 800959e: 6038 str r0, [r7, #0] + 80095a0: 6918 ldr r0, [r3, #16] + 80095a2: f7ff fd35 bl 8009010 <__hi0bits> + 80095a6: ebc0 1042 rsb r0, r0, r2, lsl #5 + 80095aa: e7e5 b.n 8009578 <__d2b+0x74> + 80095ac: 0800b9ec .word 0x0800b9ec + 80095b0: 0800b9fd .word 0x0800b9fd + +080095b4 <__ssputs_r>: + 80095b4: e92d 47f0 stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, lr} + 80095b8: 688e ldr r6, [r1, #8] + 80095ba: 461f mov r7, r3 + 80095bc: 42be cmp r6, r7 + 80095be: 680b ldr r3, [r1, #0] + 80095c0: 4682 mov sl, r0 + 80095c2: 460c mov r4, r1 + 80095c4: 4690 mov r8, r2 + 80095c6: d82d bhi.n 8009624 <__ssputs_r+0x70> + 80095c8: f9b1 200c ldrsh.w r2, [r1, #12] + 80095cc: f412 6f90 tst.w r2, #1152 @ 0x480 + 80095d0: d026 beq.n 8009620 <__ssputs_r+0x6c> + 80095d2: 6965 ldr r5, [r4, #20] + 80095d4: 6909 ldr r1, [r1, #16] + 80095d6: eb05 0545 add.w r5, r5, r5, lsl #1 + 80095da: eba3 0901 sub.w r9, r3, r1 + 80095de: eb05 75d5 add.w r5, r5, r5, lsr #31 + 80095e2: 1c7b adds r3, r7, #1 + 80095e4: 444b add r3, r9 + 80095e6: 106d asrs r5, r5, #1 + 80095e8: 429d cmp r5, r3 + 80095ea: bf38 it cc + 80095ec: 461d movcc r5, r3 + 80095ee: 0553 lsls r3, r2, #21 + 80095f0: d527 bpl.n 8009642 <__ssputs_r+0x8e> + 80095f2: 4629 mov r1, r5 + 80095f4: f7ff fbd8 bl 8008da8 <_malloc_r> + 80095f8: 4606 mov r6, r0 + 80095fa: b360 cbz r0, 8009656 <__ssputs_r+0xa2> + 80095fc: 6921 ldr r1, [r4, #16] + 80095fe: 464a mov r2, r9 + 8009600: f000 fbdc bl 8009dbc + 8009604: 89a3 ldrh r3, [r4, #12] + 8009606: f423 6390 bic.w r3, r3, #1152 @ 0x480 + 800960a: f043 0380 orr.w r3, r3, #128 @ 0x80 + 800960e: 81a3 strh r3, [r4, #12] + 8009610: 6126 str r6, [r4, #16] + 8009612: 6165 str r5, [r4, #20] + 8009614: 444e add r6, r9 + 8009616: eba5 0509 sub.w r5, r5, r9 + 800961a: 6026 str r6, [r4, #0] + 800961c: 60a5 str r5, [r4, #8] + 800961e: 463e mov r6, r7 + 8009620: 42be cmp r6, r7 + 8009622: d900 bls.n 8009626 <__ssputs_r+0x72> + 8009624: 463e mov r6, r7 + 8009626: 6820 ldr r0, [r4, #0] + 8009628: 4632 mov r2, r6 + 800962a: 4641 mov r1, r8 + 800962c: f000 fb9c bl 8009d68 + 8009630: 68a3 ldr r3, [r4, #8] + 8009632: 1b9b subs r3, r3, r6 + 8009634: 60a3 str r3, [r4, #8] + 8009636: 6823 ldr r3, [r4, #0] + 8009638: 4433 add r3, r6 + 800963a: 6023 str r3, [r4, #0] + 800963c: 2000 movs r0, #0 + 800963e: e8bd 87f0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, pc} + 8009642: 462a mov r2, r5 + 8009644: f000 fc0c bl 8009e60 <_realloc_r> + 8009648: 4606 mov r6, r0 + 800964a: 2800 cmp r0, #0 + 800964c: d1e0 bne.n 8009610 <__ssputs_r+0x5c> + 800964e: 6921 ldr r1, [r4, #16] + 8009650: 4650 mov r0, sl + 8009652: f7ff fb35 bl 8008cc0 <_free_r> + 8009656: 230c movs r3, #12 + 8009658: f8ca 3000 str.w r3, [sl] + 800965c: 89a3 ldrh r3, [r4, #12] + 800965e: f043 0340 orr.w r3, r3, #64 @ 0x40 + 8009662: 81a3 strh r3, [r4, #12] + 8009664: f04f 30ff mov.w r0, #4294967295 + 8009668: e7e9 b.n 800963e <__ssputs_r+0x8a> + ... + +0800966c <_svfiprintf_r>: + 800966c: e92d 4ff0 stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, fp, lr} + 8009670: 4698 mov r8, r3 + 8009672: 898b ldrh r3, [r1, #12] + 8009674: 061b lsls r3, r3, #24 + 8009676: b09d sub sp, #116 @ 0x74 + 8009678: 4607 mov r7, r0 + 800967a: 460d mov r5, r1 + 800967c: 4614 mov r4, r2 + 800967e: d510 bpl.n 80096a2 <_svfiprintf_r+0x36> + 8009680: 690b ldr r3, [r1, #16] + 8009682: b973 cbnz r3, 80096a2 <_svfiprintf_r+0x36> + 8009684: 2140 movs r1, #64 @ 0x40 + 8009686: f7ff fb8f bl 8008da8 <_malloc_r> + 800968a: 6028 str r0, [r5, #0] + 800968c: 6128 str r0, [r5, #16] + 800968e: b930 cbnz r0, 800969e <_svfiprintf_r+0x32> + 8009690: 230c movs r3, #12 + 8009692: 603b str r3, [r7, #0] + 8009694: f04f 30ff mov.w r0, #4294967295 + 8009698: b01d add sp, #116 @ 0x74 + 800969a: e8bd 8ff0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, fp, pc} + 800969e: 2340 movs r3, #64 @ 0x40 + 80096a0: 616b str r3, [r5, #20] + 80096a2: 2300 movs r3, #0 + 80096a4: 9309 str r3, [sp, #36] @ 0x24 + 80096a6: 2320 movs r3, #32 + 80096a8: f88d 3029 strb.w r3, [sp, #41] @ 0x29 + 80096ac: f8cd 800c str.w r8, [sp, #12] + 80096b0: 2330 movs r3, #48 @ 0x30 + 80096b2: f8df 819c ldr.w r8, [pc, #412] @ 8009850 <_svfiprintf_r+0x1e4> + 80096b6: f88d 302a strb.w r3, [sp, #42] @ 0x2a + 80096ba: f04f 0901 mov.w r9, #1 + 80096be: 4623 mov r3, r4 + 80096c0: 469a mov sl, r3 + 80096c2: f813 2b01 ldrb.w r2, [r3], #1 + 80096c6: b10a cbz r2, 80096cc <_svfiprintf_r+0x60> + 80096c8: 2a25 cmp r2, #37 @ 0x25 + 80096ca: d1f9 bne.n 80096c0 <_svfiprintf_r+0x54> + 80096cc: ebba 0b04 subs.w fp, sl, r4 + 80096d0: d00b beq.n 80096ea <_svfiprintf_r+0x7e> + 80096d2: 465b mov r3, fp + 80096d4: 4622 mov r2, r4 + 80096d6: 4629 mov r1, r5 + 80096d8: 4638 mov r0, r7 + 80096da: f7ff ff6b bl 80095b4 <__ssputs_r> + 80096de: 3001 adds r0, #1 + 80096e0: f000 80a7 beq.w 8009832 <_svfiprintf_r+0x1c6> + 80096e4: 9a09 ldr r2, [sp, #36] @ 0x24 + 80096e6: 445a add r2, fp + 80096e8: 9209 str r2, [sp, #36] @ 0x24 + 80096ea: f89a 3000 ldrb.w r3, [sl] + 80096ee: 2b00 cmp r3, #0 + 80096f0: f000 809f beq.w 8009832 <_svfiprintf_r+0x1c6> + 80096f4: 2300 movs r3, #0 + 80096f6: f04f 32ff mov.w r2, #4294967295 + 80096fa: e9cd 2305 strd r2, r3, [sp, #20] + 80096fe: f10a 0a01 add.w sl, sl, #1 + 8009702: 9304 str r3, [sp, #16] + 8009704: 9307 str r3, [sp, #28] + 8009706: f88d 3053 strb.w r3, [sp, #83] @ 0x53 + 800970a: 931a str r3, [sp, #104] @ 0x68 + 800970c: 4654 mov r4, sl + 800970e: 2205 movs r2, #5 + 8009710: f814 1b01 ldrb.w r1, [r4], #1 + 8009714: 484e ldr r0, [pc, #312] @ (8009850 <_svfiprintf_r+0x1e4>) + 8009716: f7f6 fd63 bl 80001e0 + 800971a: 9a04 ldr r2, [sp, #16] + 800971c: b9d8 cbnz r0, 8009756 <_svfiprintf_r+0xea> + 800971e: 06d0 lsls r0, r2, #27 + 8009720: bf44 itt mi + 8009722: 2320 movmi r3, #32 + 8009724: f88d 3053 strbmi.w r3, [sp, #83] @ 0x53 + 8009728: 0711 lsls r1, r2, #28 + 800972a: bf44 itt mi + 800972c: 232b movmi r3, #43 @ 0x2b + 800972e: f88d 3053 strbmi.w r3, [sp, #83] @ 0x53 + 8009732: f89a 3000 ldrb.w r3, [sl] + 8009736: 2b2a cmp r3, #42 @ 0x2a + 8009738: d015 beq.n 8009766 <_svfiprintf_r+0xfa> + 800973a: 9a07 ldr r2, [sp, #28] + 800973c: 4654 mov r4, sl + 800973e: 2000 movs r0, #0 + 8009740: f04f 0c0a mov.w ip, #10 + 8009744: 4621 mov r1, r4 + 8009746: f811 3b01 ldrb.w r3, [r1], #1 + 800974a: 3b30 subs r3, #48 @ 0x30 + 800974c: 2b09 cmp r3, #9 + 800974e: d94b bls.n 80097e8 <_svfiprintf_r+0x17c> + 8009750: b1b0 cbz r0, 8009780 <_svfiprintf_r+0x114> + 8009752: 9207 str r2, [sp, #28] + 8009754: e014 b.n 8009780 <_svfiprintf_r+0x114> + 8009756: eba0 0308 sub.w r3, r0, r8 + 800975a: fa09 f303 lsl.w r3, r9, r3 + 800975e: 4313 orrs r3, r2 + 8009760: 9304 str r3, [sp, #16] + 8009762: 46a2 mov sl, r4 + 8009764: e7d2 b.n 800970c <_svfiprintf_r+0xa0> + 8009766: 9b03 ldr r3, [sp, #12] + 8009768: 1d19 adds r1, r3, #4 + 800976a: 681b ldr r3, [r3, #0] + 800976c: 9103 str r1, [sp, #12] + 800976e: 2b00 cmp r3, #0 + 8009770: bfbb ittet lt + 8009772: 425b neglt r3, r3 + 8009774: f042 0202 orrlt.w r2, r2, #2 + 8009778: 9307 strge r3, [sp, #28] + 800977a: 9307 strlt r3, [sp, #28] + 800977c: bfb8 it lt + 800977e: 9204 strlt r2, [sp, #16] + 8009780: 7823 ldrb r3, [r4, #0] + 8009782: 2b2e cmp r3, #46 @ 0x2e + 8009784: d10a bne.n 800979c <_svfiprintf_r+0x130> + 8009786: 7863 ldrb r3, [r4, #1] + 8009788: 2b2a cmp r3, #42 @ 0x2a + 800978a: d132 bne.n 80097f2 <_svfiprintf_r+0x186> + 800978c: 9b03 ldr r3, [sp, #12] + 800978e: 1d1a adds r2, r3, #4 + 8009790: 681b ldr r3, [r3, #0] + 8009792: 9203 str r2, [sp, #12] + 8009794: ea43 73e3 orr.w r3, r3, r3, asr #31 + 8009798: 3402 adds r4, #2 + 800979a: 9305 str r3, [sp, #20] + 800979c: f8df a0c0 ldr.w sl, [pc, #192] @ 8009860 <_svfiprintf_r+0x1f4> + 80097a0: 7821 ldrb r1, [r4, #0] + 80097a2: 2203 movs r2, #3 + 80097a4: 4650 mov r0, sl + 80097a6: f7f6 fd1b bl 80001e0 + 80097aa: b138 cbz r0, 80097bc <_svfiprintf_r+0x150> + 80097ac: 9b04 ldr r3, [sp, #16] + 80097ae: eba0 000a sub.w r0, r0, sl + 80097b2: 2240 movs r2, #64 @ 0x40 + 80097b4: 4082 lsls r2, r0 + 80097b6: 4313 orrs r3, r2 + 80097b8: 3401 adds r4, #1 + 80097ba: 9304 str r3, [sp, #16] + 80097bc: f814 1b01 ldrb.w r1, [r4], #1 + 80097c0: 4824 ldr r0, [pc, #144] @ (8009854 <_svfiprintf_r+0x1e8>) + 80097c2: f88d 1028 strb.w r1, [sp, #40] @ 0x28 + 80097c6: 2206 movs r2, #6 + 80097c8: f7f6 fd0a bl 80001e0 + 80097cc: 2800 cmp r0, #0 + 80097ce: d036 beq.n 800983e <_svfiprintf_r+0x1d2> + 80097d0: 4b21 ldr r3, [pc, #132] @ (8009858 <_svfiprintf_r+0x1ec>) + 80097d2: bb1b cbnz r3, 800981c <_svfiprintf_r+0x1b0> + 80097d4: 9b03 ldr r3, [sp, #12] + 80097d6: 3307 adds r3, #7 + 80097d8: f023 0307 bic.w r3, r3, #7 + 80097dc: 3308 adds r3, #8 + 80097de: 9303 str r3, [sp, #12] + 80097e0: 9b09 ldr r3, [sp, #36] @ 0x24 + 80097e2: 4433 add r3, r6 + 80097e4: 9309 str r3, [sp, #36] @ 0x24 + 80097e6: e76a b.n 80096be <_svfiprintf_r+0x52> + 80097e8: fb0c 3202 mla r2, ip, r2, r3 + 80097ec: 460c mov r4, r1 + 80097ee: 2001 movs r0, #1 + 80097f0: e7a8 b.n 8009744 <_svfiprintf_r+0xd8> + 80097f2: 2300 movs r3, #0 + 80097f4: 3401 adds r4, #1 + 80097f6: 9305 str r3, [sp, #20] + 80097f8: 4619 mov r1, r3 + 80097fa: f04f 0c0a mov.w ip, #10 + 80097fe: 4620 mov r0, r4 + 8009800: f810 2b01 ldrb.w r2, [r0], #1 + 8009804: 3a30 subs r2, #48 @ 0x30 + 8009806: 2a09 cmp r2, #9 + 8009808: d903 bls.n 8009812 <_svfiprintf_r+0x1a6> + 800980a: 2b00 cmp r3, #0 + 800980c: d0c6 beq.n 800979c <_svfiprintf_r+0x130> + 800980e: 9105 str r1, [sp, #20] + 8009810: e7c4 b.n 800979c <_svfiprintf_r+0x130> + 8009812: fb0c 2101 mla r1, ip, r1, r2 + 8009816: 4604 mov r4, r0 + 8009818: 2301 movs r3, #1 + 800981a: e7f0 b.n 80097fe <_svfiprintf_r+0x192> + 800981c: ab03 add r3, sp, #12 + 800981e: 9300 str r3, [sp, #0] + 8009820: 462a mov r2, r5 + 8009822: 4b0e ldr r3, [pc, #56] @ (800985c <_svfiprintf_r+0x1f0>) + 8009824: a904 add r1, sp, #16 + 8009826: 4638 mov r0, r7 + 8009828: f7fd fe6e bl 8007508 <_printf_float> + 800982c: 1c42 adds r2, r0, #1 + 800982e: 4606 mov r6, r0 + 8009830: d1d6 bne.n 80097e0 <_svfiprintf_r+0x174> + 8009832: 89ab ldrh r3, [r5, #12] + 8009834: 065b lsls r3, r3, #25 + 8009836: f53f af2d bmi.w 8009694 <_svfiprintf_r+0x28> + 800983a: 9809 ldr r0, [sp, #36] @ 0x24 + 800983c: e72c b.n 8009698 <_svfiprintf_r+0x2c> + 800983e: ab03 add r3, sp, #12 + 8009840: 9300 str r3, [sp, #0] + 8009842: 462a mov r2, r5 + 8009844: 4b05 ldr r3, [pc, #20] @ (800985c <_svfiprintf_r+0x1f0>) + 8009846: a904 add r1, sp, #16 + 8009848: 4638 mov r0, r7 + 800984a: f7fe f8f5 bl 8007a38 <_printf_i> + 800984e: e7ed b.n 800982c <_svfiprintf_r+0x1c0> + 8009850: 0800ba56 .word 0x0800ba56 + 8009854: 0800ba60 .word 0x0800ba60 + 8009858: 08007509 .word 0x08007509 + 800985c: 080095b5 .word 0x080095b5 + 8009860: 0800ba5c .word 0x0800ba5c + +08009864 <__sfputc_r>: + 8009864: 6893 ldr r3, [r2, #8] + 8009866: 3b01 subs r3, #1 + 8009868: 2b00 cmp r3, #0 + 800986a: b410 push {r4} + 800986c: 6093 str r3, [r2, #8] + 800986e: da08 bge.n 8009882 <__sfputc_r+0x1e> + 8009870: 6994 ldr r4, [r2, #24] + 8009872: 42a3 cmp r3, r4 + 8009874: db01 blt.n 800987a <__sfputc_r+0x16> + 8009876: 290a cmp r1, #10 + 8009878: d103 bne.n 8009882 <__sfputc_r+0x1e> + 800987a: f85d 4b04 ldr.w r4, [sp], #4 + 800987e: f000 b9df b.w 8009c40 <__swbuf_r> + 8009882: 6813 ldr r3, [r2, #0] + 8009884: 1c58 adds r0, r3, #1 + 8009886: 6010 str r0, [r2, #0] + 8009888: 7019 strb r1, [r3, #0] + 800988a: 4608 mov r0, r1 + 800988c: f85d 4b04 ldr.w r4, [sp], #4 + 8009890: 4770 bx lr + +08009892 <__sfputs_r>: + 8009892: b5f8 push {r3, r4, r5, r6, r7, lr} + 8009894: 4606 mov r6, r0 + 8009896: 460f mov r7, r1 + 8009898: 4614 mov r4, r2 + 800989a: 18d5 adds r5, r2, r3 + 800989c: 42ac cmp r4, r5 + 800989e: d101 bne.n 80098a4 <__sfputs_r+0x12> + 80098a0: 2000 movs r0, #0 + 80098a2: e007 b.n 80098b4 <__sfputs_r+0x22> + 80098a4: f814 1b01 ldrb.w r1, [r4], #1 + 80098a8: 463a mov r2, r7 + 80098aa: 4630 mov r0, r6 + 80098ac: f7ff ffda bl 8009864 <__sfputc_r> + 80098b0: 1c43 adds r3, r0, #1 + 80098b2: d1f3 bne.n 800989c <__sfputs_r+0xa> + 80098b4: bdf8 pop {r3, r4, r5, r6, r7, pc} + ... + +080098b8 <_vfiprintf_r>: + 80098b8: e92d 4ff0 stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, fp, lr} + 80098bc: 460d mov r5, r1 + 80098be: b09d sub sp, #116 @ 0x74 + 80098c0: 4614 mov r4, r2 + 80098c2: 4698 mov r8, r3 + 80098c4: 4606 mov r6, r0 + 80098c6: b118 cbz r0, 80098d0 <_vfiprintf_r+0x18> + 80098c8: 6a03 ldr r3, [r0, #32] + 80098ca: b90b cbnz r3, 80098d0 <_vfiprintf_r+0x18> + 80098cc: f7fe fa5e bl 8007d8c <__sinit> + 80098d0: 6e6b ldr r3, [r5, #100] @ 0x64 + 80098d2: 07d9 lsls r1, r3, #31 + 80098d4: d405 bmi.n 80098e2 <_vfiprintf_r+0x2a> + 80098d6: 89ab ldrh r3, [r5, #12] + 80098d8: 059a lsls r2, r3, #22 + 80098da: d402 bmi.n 80098e2 <_vfiprintf_r+0x2a> + 80098dc: 6da8 ldr r0, [r5, #88] @ 0x58 + 80098de: f7fe fb94 bl 800800a <__retarget_lock_acquire_recursive> + 80098e2: 89ab ldrh r3, [r5, #12] + 80098e4: 071b lsls r3, r3, #28 + 80098e6: d501 bpl.n 80098ec <_vfiprintf_r+0x34> + 80098e8: 692b ldr r3, [r5, #16] + 80098ea: b99b cbnz r3, 8009914 <_vfiprintf_r+0x5c> + 80098ec: 4629 mov r1, r5 + 80098ee: 4630 mov r0, r6 + 80098f0: f000 f9e4 bl 8009cbc <__swsetup_r> + 80098f4: b170 cbz r0, 8009914 <_vfiprintf_r+0x5c> + 80098f6: 6e6b ldr r3, [r5, #100] @ 0x64 + 80098f8: 07dc lsls r4, r3, #31 + 80098fa: d504 bpl.n 8009906 <_vfiprintf_r+0x4e> + 80098fc: f04f 30ff mov.w r0, #4294967295 + 8009900: b01d add sp, #116 @ 0x74 + 8009902: e8bd 8ff0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, fp, pc} + 8009906: 89ab ldrh r3, [r5, #12] + 8009908: 0598 lsls r0, r3, #22 + 800990a: d4f7 bmi.n 80098fc <_vfiprintf_r+0x44> + 800990c: 6da8 ldr r0, [r5, #88] @ 0x58 + 800990e: f7fe fb7d bl 800800c <__retarget_lock_release_recursive> + 8009912: e7f3 b.n 80098fc <_vfiprintf_r+0x44> + 8009914: 2300 movs r3, #0 + 8009916: 9309 str r3, [sp, #36] @ 0x24 + 8009918: 2320 movs r3, #32 + 800991a: f88d 3029 strb.w r3, [sp, #41] @ 0x29 + 800991e: f8cd 800c str.w r8, [sp, #12] + 8009922: 2330 movs r3, #48 @ 0x30 + 8009924: f8df 81ac ldr.w r8, [pc, #428] @ 8009ad4 <_vfiprintf_r+0x21c> + 8009928: f88d 302a strb.w r3, [sp, #42] @ 0x2a + 800992c: f04f 0901 mov.w r9, #1 + 8009930: 4623 mov r3, r4 + 8009932: 469a mov sl, r3 + 8009934: f813 2b01 ldrb.w r2, [r3], #1 + 8009938: b10a cbz r2, 800993e <_vfiprintf_r+0x86> + 800993a: 2a25 cmp r2, #37 @ 0x25 + 800993c: d1f9 bne.n 8009932 <_vfiprintf_r+0x7a> + 800993e: ebba 0b04 subs.w fp, sl, r4 + 8009942: d00b beq.n 800995c <_vfiprintf_r+0xa4> + 8009944: 465b mov r3, fp + 8009946: 4622 mov r2, r4 + 8009948: 4629 mov r1, r5 + 800994a: 4630 mov r0, r6 + 800994c: f7ff ffa1 bl 8009892 <__sfputs_r> + 8009950: 3001 adds r0, #1 + 8009952: f000 80a7 beq.w 8009aa4 <_vfiprintf_r+0x1ec> + 8009956: 9a09 ldr r2, [sp, #36] @ 0x24 + 8009958: 445a add r2, fp + 800995a: 9209 str r2, [sp, #36] @ 0x24 + 800995c: f89a 3000 ldrb.w r3, [sl] + 8009960: 2b00 cmp r3, #0 + 8009962: f000 809f beq.w 8009aa4 <_vfiprintf_r+0x1ec> + 8009966: 2300 movs r3, #0 + 8009968: f04f 32ff mov.w r2, #4294967295 + 800996c: e9cd 2305 strd r2, r3, [sp, #20] + 8009970: f10a 0a01 add.w sl, sl, #1 + 8009974: 9304 str r3, [sp, #16] + 8009976: 9307 str r3, [sp, #28] + 8009978: f88d 3053 strb.w r3, [sp, #83] @ 0x53 + 800997c: 931a str r3, [sp, #104] @ 0x68 + 800997e: 4654 mov r4, sl + 8009980: 2205 movs r2, #5 + 8009982: f814 1b01 ldrb.w r1, [r4], #1 + 8009986: 4853 ldr r0, [pc, #332] @ (8009ad4 <_vfiprintf_r+0x21c>) + 8009988: f7f6 fc2a bl 80001e0 + 800998c: 9a04 ldr r2, [sp, #16] + 800998e: b9d8 cbnz r0, 80099c8 <_vfiprintf_r+0x110> + 8009990: 06d1 lsls r1, r2, #27 + 8009992: bf44 itt mi + 8009994: 2320 movmi r3, #32 + 8009996: f88d 3053 strbmi.w r3, [sp, #83] @ 0x53 + 800999a: 0713 lsls r3, r2, #28 + 800999c: bf44 itt mi + 800999e: 232b movmi r3, #43 @ 0x2b + 80099a0: f88d 3053 strbmi.w r3, [sp, #83] @ 0x53 + 80099a4: f89a 3000 ldrb.w r3, [sl] + 80099a8: 2b2a cmp r3, #42 @ 0x2a + 80099aa: d015 beq.n 80099d8 <_vfiprintf_r+0x120> + 80099ac: 9a07 ldr r2, [sp, #28] + 80099ae: 4654 mov r4, sl + 80099b0: 2000 movs r0, #0 + 80099b2: f04f 0c0a mov.w ip, #10 + 80099b6: 4621 mov r1, r4 + 80099b8: f811 3b01 ldrb.w r3, [r1], #1 + 80099bc: 3b30 subs r3, #48 @ 0x30 + 80099be: 2b09 cmp r3, #9 + 80099c0: d94b bls.n 8009a5a <_vfiprintf_r+0x1a2> + 80099c2: b1b0 cbz r0, 80099f2 <_vfiprintf_r+0x13a> + 80099c4: 9207 str r2, [sp, #28] + 80099c6: e014 b.n 80099f2 <_vfiprintf_r+0x13a> + 80099c8: eba0 0308 sub.w r3, r0, r8 + 80099cc: fa09 f303 lsl.w r3, r9, r3 + 80099d0: 4313 orrs r3, r2 + 80099d2: 9304 str r3, [sp, #16] + 80099d4: 46a2 mov sl, r4 + 80099d6: e7d2 b.n 800997e <_vfiprintf_r+0xc6> + 80099d8: 9b03 ldr r3, [sp, #12] + 80099da: 1d19 adds r1, r3, #4 + 80099dc: 681b ldr r3, [r3, #0] + 80099de: 9103 str r1, [sp, #12] + 80099e0: 2b00 cmp r3, #0 + 80099e2: bfbb ittet lt + 80099e4: 425b neglt r3, r3 + 80099e6: f042 0202 orrlt.w r2, r2, #2 + 80099ea: 9307 strge r3, [sp, #28] + 80099ec: 9307 strlt r3, [sp, #28] + 80099ee: bfb8 it lt + 80099f0: 9204 strlt r2, [sp, #16] + 80099f2: 7823 ldrb r3, [r4, #0] + 80099f4: 2b2e cmp r3, #46 @ 0x2e + 80099f6: d10a bne.n 8009a0e <_vfiprintf_r+0x156> + 80099f8: 7863 ldrb r3, [r4, #1] + 80099fa: 2b2a cmp r3, #42 @ 0x2a + 80099fc: d132 bne.n 8009a64 <_vfiprintf_r+0x1ac> + 80099fe: 9b03 ldr r3, [sp, #12] + 8009a00: 1d1a adds r2, r3, #4 + 8009a02: 681b ldr r3, [r3, #0] + 8009a04: 9203 str r2, [sp, #12] + 8009a06: ea43 73e3 orr.w r3, r3, r3, asr #31 + 8009a0a: 3402 adds r4, #2 + 8009a0c: 9305 str r3, [sp, #20] + 8009a0e: f8df a0d4 ldr.w sl, [pc, #212] @ 8009ae4 <_vfiprintf_r+0x22c> + 8009a12: 7821 ldrb r1, [r4, #0] + 8009a14: 2203 movs r2, #3 + 8009a16: 4650 mov r0, sl + 8009a18: f7f6 fbe2 bl 80001e0 + 8009a1c: b138 cbz r0, 8009a2e <_vfiprintf_r+0x176> + 8009a1e: 9b04 ldr r3, [sp, #16] + 8009a20: eba0 000a sub.w r0, r0, sl + 8009a24: 2240 movs r2, #64 @ 0x40 + 8009a26: 4082 lsls r2, r0 + 8009a28: 4313 orrs r3, r2 + 8009a2a: 3401 adds r4, #1 + 8009a2c: 9304 str r3, [sp, #16] + 8009a2e: f814 1b01 ldrb.w r1, [r4], #1 + 8009a32: 4829 ldr r0, [pc, #164] @ (8009ad8 <_vfiprintf_r+0x220>) + 8009a34: f88d 1028 strb.w r1, [sp, #40] @ 0x28 + 8009a38: 2206 movs r2, #6 + 8009a3a: f7f6 fbd1 bl 80001e0 + 8009a3e: 2800 cmp r0, #0 + 8009a40: d03f beq.n 8009ac2 <_vfiprintf_r+0x20a> + 8009a42: 4b26 ldr r3, [pc, #152] @ (8009adc <_vfiprintf_r+0x224>) + 8009a44: bb1b cbnz r3, 8009a8e <_vfiprintf_r+0x1d6> + 8009a46: 9b03 ldr r3, [sp, #12] + 8009a48: 3307 adds r3, #7 + 8009a4a: f023 0307 bic.w r3, r3, #7 + 8009a4e: 3308 adds r3, #8 + 8009a50: 9303 str r3, [sp, #12] + 8009a52: 9b09 ldr r3, [sp, #36] @ 0x24 + 8009a54: 443b add r3, r7 + 8009a56: 9309 str r3, [sp, #36] @ 0x24 + 8009a58: e76a b.n 8009930 <_vfiprintf_r+0x78> + 8009a5a: fb0c 3202 mla r2, ip, r2, r3 + 8009a5e: 460c mov r4, r1 + 8009a60: 2001 movs r0, #1 + 8009a62: e7a8 b.n 80099b6 <_vfiprintf_r+0xfe> + 8009a64: 2300 movs r3, #0 + 8009a66: 3401 adds r4, #1 + 8009a68: 9305 str r3, [sp, #20] + 8009a6a: 4619 mov r1, r3 + 8009a6c: f04f 0c0a mov.w ip, #10 + 8009a70: 4620 mov r0, r4 + 8009a72: f810 2b01 ldrb.w r2, [r0], #1 + 8009a76: 3a30 subs r2, #48 @ 0x30 + 8009a78: 2a09 cmp r2, #9 + 8009a7a: d903 bls.n 8009a84 <_vfiprintf_r+0x1cc> + 8009a7c: 2b00 cmp r3, #0 + 8009a7e: d0c6 beq.n 8009a0e <_vfiprintf_r+0x156> + 8009a80: 9105 str r1, [sp, #20] + 8009a82: e7c4 b.n 8009a0e <_vfiprintf_r+0x156> + 8009a84: fb0c 2101 mla r1, ip, r1, r2 + 8009a88: 4604 mov r4, r0 + 8009a8a: 2301 movs r3, #1 + 8009a8c: e7f0 b.n 8009a70 <_vfiprintf_r+0x1b8> + 8009a8e: ab03 add r3, sp, #12 + 8009a90: 9300 str r3, [sp, #0] + 8009a92: 462a mov r2, r5 + 8009a94: 4b12 ldr r3, [pc, #72] @ (8009ae0 <_vfiprintf_r+0x228>) + 8009a96: a904 add r1, sp, #16 + 8009a98: 4630 mov r0, r6 + 8009a9a: f7fd fd35 bl 8007508 <_printf_float> + 8009a9e: 4607 mov r7, r0 + 8009aa0: 1c78 adds r0, r7, #1 + 8009aa2: d1d6 bne.n 8009a52 <_vfiprintf_r+0x19a> + 8009aa4: 6e6b ldr r3, [r5, #100] @ 0x64 + 8009aa6: 07d9 lsls r1, r3, #31 + 8009aa8: d405 bmi.n 8009ab6 <_vfiprintf_r+0x1fe> + 8009aaa: 89ab ldrh r3, [r5, #12] + 8009aac: 059a lsls r2, r3, #22 + 8009aae: d402 bmi.n 8009ab6 <_vfiprintf_r+0x1fe> + 8009ab0: 6da8 ldr r0, [r5, #88] @ 0x58 + 8009ab2: f7fe faab bl 800800c <__retarget_lock_release_recursive> + 8009ab6: 89ab ldrh r3, [r5, #12] + 8009ab8: 065b lsls r3, r3, #25 + 8009aba: f53f af1f bmi.w 80098fc <_vfiprintf_r+0x44> + 8009abe: 9809 ldr r0, [sp, #36] @ 0x24 + 8009ac0: e71e b.n 8009900 <_vfiprintf_r+0x48> + 8009ac2: ab03 add r3, sp, #12 + 8009ac4: 9300 str r3, [sp, #0] + 8009ac6: 462a mov r2, r5 + 8009ac8: 4b05 ldr r3, [pc, #20] @ (8009ae0 <_vfiprintf_r+0x228>) + 8009aca: a904 add r1, sp, #16 + 8009acc: 4630 mov r0, r6 + 8009ace: f7fd ffb3 bl 8007a38 <_printf_i> + 8009ad2: e7e4 b.n 8009a9e <_vfiprintf_r+0x1e6> + 8009ad4: 0800ba56 .word 0x0800ba56 + 8009ad8: 0800ba60 .word 0x0800ba60 + 8009adc: 08007509 .word 0x08007509 + 8009ae0: 08009893 .word 0x08009893 + 8009ae4: 0800ba5c .word 0x0800ba5c + +08009ae8 <__sflush_r>: + 8009ae8: f9b1 200c ldrsh.w r2, [r1, #12] + 8009aec: e92d 41f0 stmdb sp!, {r4, r5, r6, r7, r8, lr} + 8009af0: 0716 lsls r6, r2, #28 + 8009af2: 4605 mov r5, r0 + 8009af4: 460c mov r4, r1 + 8009af6: d454 bmi.n 8009ba2 <__sflush_r+0xba> + 8009af8: 684b ldr r3, [r1, #4] + 8009afa: 2b00 cmp r3, #0 + 8009afc: dc02 bgt.n 8009b04 <__sflush_r+0x1c> + 8009afe: 6c0b ldr r3, [r1, #64] @ 0x40 + 8009b00: 2b00 cmp r3, #0 + 8009b02: dd48 ble.n 8009b96 <__sflush_r+0xae> + 8009b04: 6ae6 ldr r6, [r4, #44] @ 0x2c + 8009b06: 2e00 cmp r6, #0 + 8009b08: d045 beq.n 8009b96 <__sflush_r+0xae> + 8009b0a: 2300 movs r3, #0 + 8009b0c: f412 5280 ands.w r2, r2, #4096 @ 0x1000 + 8009b10: 682f ldr r7, [r5, #0] + 8009b12: 6a21 ldr r1, [r4, #32] + 8009b14: 602b str r3, [r5, #0] + 8009b16: d030 beq.n 8009b7a <__sflush_r+0x92> + 8009b18: 6d62 ldr r2, [r4, #84] @ 0x54 + 8009b1a: 89a3 ldrh r3, [r4, #12] + 8009b1c: 0759 lsls r1, r3, #29 + 8009b1e: d505 bpl.n 8009b2c <__sflush_r+0x44> + 8009b20: 6863 ldr r3, [r4, #4] + 8009b22: 1ad2 subs r2, r2, r3 + 8009b24: 6b63 ldr r3, [r4, #52] @ 0x34 + 8009b26: b10b cbz r3, 8009b2c <__sflush_r+0x44> + 8009b28: 6c23 ldr r3, [r4, #64] @ 0x40 + 8009b2a: 1ad2 subs r2, r2, r3 + 8009b2c: 2300 movs r3, #0 + 8009b2e: 6ae6 ldr r6, [r4, #44] @ 0x2c + 8009b30: 6a21 ldr r1, [r4, #32] + 8009b32: 4628 mov r0, r5 + 8009b34: 47b0 blx r6 + 8009b36: 1c43 adds r3, r0, #1 + 8009b38: 89a3 ldrh r3, [r4, #12] + 8009b3a: d106 bne.n 8009b4a <__sflush_r+0x62> + 8009b3c: 6829 ldr r1, [r5, #0] + 8009b3e: 291d cmp r1, #29 + 8009b40: d82b bhi.n 8009b9a <__sflush_r+0xb2> + 8009b42: 4a2a ldr r2, [pc, #168] @ (8009bec <__sflush_r+0x104>) + 8009b44: 40ca lsrs r2, r1 + 8009b46: 07d6 lsls r6, r2, #31 + 8009b48: d527 bpl.n 8009b9a <__sflush_r+0xb2> + 8009b4a: 2200 movs r2, #0 + 8009b4c: 6062 str r2, [r4, #4] + 8009b4e: 04d9 lsls r1, r3, #19 + 8009b50: 6922 ldr r2, [r4, #16] + 8009b52: 6022 str r2, [r4, #0] + 8009b54: d504 bpl.n 8009b60 <__sflush_r+0x78> + 8009b56: 1c42 adds r2, r0, #1 + 8009b58: d101 bne.n 8009b5e <__sflush_r+0x76> + 8009b5a: 682b ldr r3, [r5, #0] + 8009b5c: b903 cbnz r3, 8009b60 <__sflush_r+0x78> + 8009b5e: 6560 str r0, [r4, #84] @ 0x54 + 8009b60: 6b61 ldr r1, [r4, #52] @ 0x34 + 8009b62: 602f str r7, [r5, #0] + 8009b64: b1b9 cbz r1, 8009b96 <__sflush_r+0xae> + 8009b66: f104 0344 add.w r3, r4, #68 @ 0x44 + 8009b6a: 4299 cmp r1, r3 + 8009b6c: d002 beq.n 8009b74 <__sflush_r+0x8c> + 8009b6e: 4628 mov r0, r5 + 8009b70: f7ff f8a6 bl 8008cc0 <_free_r> + 8009b74: 2300 movs r3, #0 + 8009b76: 6363 str r3, [r4, #52] @ 0x34 + 8009b78: e00d b.n 8009b96 <__sflush_r+0xae> + 8009b7a: 2301 movs r3, #1 + 8009b7c: 4628 mov r0, r5 + 8009b7e: 47b0 blx r6 + 8009b80: 4602 mov r2, r0 + 8009b82: 1c50 adds r0, r2, #1 + 8009b84: d1c9 bne.n 8009b1a <__sflush_r+0x32> + 8009b86: 682b ldr r3, [r5, #0] + 8009b88: 2b00 cmp r3, #0 + 8009b8a: d0c6 beq.n 8009b1a <__sflush_r+0x32> + 8009b8c: 2b1d cmp r3, #29 + 8009b8e: d001 beq.n 8009b94 <__sflush_r+0xac> + 8009b90: 2b16 cmp r3, #22 + 8009b92: d11e bne.n 8009bd2 <__sflush_r+0xea> + 8009b94: 602f str r7, [r5, #0] + 8009b96: 2000 movs r0, #0 + 8009b98: e022 b.n 8009be0 <__sflush_r+0xf8> + 8009b9a: f043 0340 orr.w r3, r3, #64 @ 0x40 + 8009b9e: b21b sxth r3, r3 + 8009ba0: e01b b.n 8009bda <__sflush_r+0xf2> + 8009ba2: 690f ldr r7, [r1, #16] + 8009ba4: 2f00 cmp r7, #0 + 8009ba6: d0f6 beq.n 8009b96 <__sflush_r+0xae> + 8009ba8: 0793 lsls r3, r2, #30 + 8009baa: 680e ldr r6, [r1, #0] + 8009bac: bf08 it eq + 8009bae: 694b ldreq r3, [r1, #20] + 8009bb0: 600f str r7, [r1, #0] + 8009bb2: bf18 it ne + 8009bb4: 2300 movne r3, #0 + 8009bb6: eba6 0807 sub.w r8, r6, r7 + 8009bba: 608b str r3, [r1, #8] + 8009bbc: f1b8 0f00 cmp.w r8, #0 + 8009bc0: dde9 ble.n 8009b96 <__sflush_r+0xae> + 8009bc2: 6a21 ldr r1, [r4, #32] + 8009bc4: 6aa6 ldr r6, [r4, #40] @ 0x28 + 8009bc6: 4643 mov r3, r8 + 8009bc8: 463a mov r2, r7 + 8009bca: 4628 mov r0, r5 + 8009bcc: 47b0 blx r6 + 8009bce: 2800 cmp r0, #0 + 8009bd0: dc08 bgt.n 8009be4 <__sflush_r+0xfc> + 8009bd2: f9b4 300c ldrsh.w r3, [r4, #12] + 8009bd6: f043 0340 orr.w r3, r3, #64 @ 0x40 + 8009bda: 81a3 strh r3, [r4, #12] + 8009bdc: f04f 30ff mov.w r0, #4294967295 + 8009be0: e8bd 81f0 ldmia.w sp!, {r4, r5, r6, r7, r8, pc} + 8009be4: 4407 add r7, r0 + 8009be6: eba8 0800 sub.w r8, r8, r0 + 8009bea: e7e7 b.n 8009bbc <__sflush_r+0xd4> + 8009bec: 20400001 .word 0x20400001 + +08009bf0 <_fflush_r>: + 8009bf0: b538 push {r3, r4, r5, lr} + 8009bf2: 690b ldr r3, [r1, #16] + 8009bf4: 4605 mov r5, r0 + 8009bf6: 460c mov r4, r1 + 8009bf8: b913 cbnz r3, 8009c00 <_fflush_r+0x10> + 8009bfa: 2500 movs r5, #0 + 8009bfc: 4628 mov r0, r5 + 8009bfe: bd38 pop {r3, r4, r5, pc} + 8009c00: b118 cbz r0, 8009c0a <_fflush_r+0x1a> + 8009c02: 6a03 ldr r3, [r0, #32] + 8009c04: b90b cbnz r3, 8009c0a <_fflush_r+0x1a> + 8009c06: f7fe f8c1 bl 8007d8c <__sinit> + 8009c0a: f9b4 300c ldrsh.w r3, [r4, #12] + 8009c0e: 2b00 cmp r3, #0 + 8009c10: d0f3 beq.n 8009bfa <_fflush_r+0xa> + 8009c12: 6e62 ldr r2, [r4, #100] @ 0x64 + 8009c14: 07d0 lsls r0, r2, #31 + 8009c16: d404 bmi.n 8009c22 <_fflush_r+0x32> + 8009c18: 0599 lsls r1, r3, #22 + 8009c1a: d402 bmi.n 8009c22 <_fflush_r+0x32> + 8009c1c: 6da0 ldr r0, [r4, #88] @ 0x58 + 8009c1e: f7fe f9f4 bl 800800a <__retarget_lock_acquire_recursive> + 8009c22: 4628 mov r0, r5 + 8009c24: 4621 mov r1, r4 + 8009c26: f7ff ff5f bl 8009ae8 <__sflush_r> + 8009c2a: 6e63 ldr r3, [r4, #100] @ 0x64 + 8009c2c: 07da lsls r2, r3, #31 + 8009c2e: 4605 mov r5, r0 + 8009c30: d4e4 bmi.n 8009bfc <_fflush_r+0xc> + 8009c32: 89a3 ldrh r3, [r4, #12] + 8009c34: 059b lsls r3, r3, #22 + 8009c36: d4e1 bmi.n 8009bfc <_fflush_r+0xc> + 8009c38: 6da0 ldr r0, [r4, #88] @ 0x58 + 8009c3a: f7fe f9e7 bl 800800c <__retarget_lock_release_recursive> + 8009c3e: e7dd b.n 8009bfc <_fflush_r+0xc> + +08009c40 <__swbuf_r>: + 8009c40: b5f8 push {r3, r4, r5, r6, r7, lr} + 8009c42: 460e mov r6, r1 + 8009c44: 4614 mov r4, r2 + 8009c46: 4605 mov r5, r0 + 8009c48: b118 cbz r0, 8009c52 <__swbuf_r+0x12> + 8009c4a: 6a03 ldr r3, [r0, #32] + 8009c4c: b90b cbnz r3, 8009c52 <__swbuf_r+0x12> + 8009c4e: f7fe f89d bl 8007d8c <__sinit> + 8009c52: 69a3 ldr r3, [r4, #24] + 8009c54: 60a3 str r3, [r4, #8] + 8009c56: 89a3 ldrh r3, [r4, #12] + 8009c58: 071a lsls r2, r3, #28 + 8009c5a: d501 bpl.n 8009c60 <__swbuf_r+0x20> + 8009c5c: 6923 ldr r3, [r4, #16] + 8009c5e: b943 cbnz r3, 8009c72 <__swbuf_r+0x32> + 8009c60: 4621 mov r1, r4 + 8009c62: 4628 mov r0, r5 + 8009c64: f000 f82a bl 8009cbc <__swsetup_r> + 8009c68: b118 cbz r0, 8009c72 <__swbuf_r+0x32> + 8009c6a: f04f 37ff mov.w r7, #4294967295 + 8009c6e: 4638 mov r0, r7 + 8009c70: bdf8 pop {r3, r4, r5, r6, r7, pc} + 8009c72: 6823 ldr r3, [r4, #0] + 8009c74: 6922 ldr r2, [r4, #16] + 8009c76: 1a98 subs r0, r3, r2 + 8009c78: 6963 ldr r3, [r4, #20] + 8009c7a: b2f6 uxtb r6, r6 + 8009c7c: 4283 cmp r3, r0 + 8009c7e: 4637 mov r7, r6 + 8009c80: dc05 bgt.n 8009c8e <__swbuf_r+0x4e> + 8009c82: 4621 mov r1, r4 + 8009c84: 4628 mov r0, r5 + 8009c86: f7ff ffb3 bl 8009bf0 <_fflush_r> + 8009c8a: 2800 cmp r0, #0 + 8009c8c: d1ed bne.n 8009c6a <__swbuf_r+0x2a> + 8009c8e: 68a3 ldr r3, [r4, #8] + 8009c90: 3b01 subs r3, #1 + 8009c92: 60a3 str r3, [r4, #8] + 8009c94: 6823 ldr r3, [r4, #0] + 8009c96: 1c5a adds r2, r3, #1 + 8009c98: 6022 str r2, [r4, #0] + 8009c9a: 701e strb r6, [r3, #0] + 8009c9c: 6962 ldr r2, [r4, #20] + 8009c9e: 1c43 adds r3, r0, #1 + 8009ca0: 429a cmp r2, r3 + 8009ca2: d004 beq.n 8009cae <__swbuf_r+0x6e> + 8009ca4: 89a3 ldrh r3, [r4, #12] + 8009ca6: 07db lsls r3, r3, #31 + 8009ca8: d5e1 bpl.n 8009c6e <__swbuf_r+0x2e> + 8009caa: 2e0a cmp r6, #10 + 8009cac: d1df bne.n 8009c6e <__swbuf_r+0x2e> + 8009cae: 4621 mov r1, r4 + 8009cb0: 4628 mov r0, r5 + 8009cb2: f7ff ff9d bl 8009bf0 <_fflush_r> + 8009cb6: 2800 cmp r0, #0 + 8009cb8: d0d9 beq.n 8009c6e <__swbuf_r+0x2e> + 8009cba: e7d6 b.n 8009c6a <__swbuf_r+0x2a> + +08009cbc <__swsetup_r>: + 8009cbc: b538 push {r3, r4, r5, lr} + 8009cbe: 4b29 ldr r3, [pc, #164] @ (8009d64 <__swsetup_r+0xa8>) + 8009cc0: 4605 mov r5, r0 + 8009cc2: 6818 ldr r0, [r3, #0] + 8009cc4: 460c mov r4, r1 + 8009cc6: b118 cbz r0, 8009cd0 <__swsetup_r+0x14> + 8009cc8: 6a03 ldr r3, [r0, #32] + 8009cca: b90b cbnz r3, 8009cd0 <__swsetup_r+0x14> + 8009ccc: f7fe f85e bl 8007d8c <__sinit> + 8009cd0: f9b4 300c ldrsh.w r3, [r4, #12] + 8009cd4: 0719 lsls r1, r3, #28 + 8009cd6: d422 bmi.n 8009d1e <__swsetup_r+0x62> + 8009cd8: 06da lsls r2, r3, #27 + 8009cda: d407 bmi.n 8009cec <__swsetup_r+0x30> + 8009cdc: 2209 movs r2, #9 + 8009cde: 602a str r2, [r5, #0] + 8009ce0: f043 0340 orr.w r3, r3, #64 @ 0x40 + 8009ce4: 81a3 strh r3, [r4, #12] + 8009ce6: f04f 30ff mov.w r0, #4294967295 + 8009cea: e033 b.n 8009d54 <__swsetup_r+0x98> + 8009cec: 0758 lsls r0, r3, #29 + 8009cee: d512 bpl.n 8009d16 <__swsetup_r+0x5a> + 8009cf0: 6b61 ldr r1, [r4, #52] @ 0x34 + 8009cf2: b141 cbz r1, 8009d06 <__swsetup_r+0x4a> + 8009cf4: f104 0344 add.w r3, r4, #68 @ 0x44 + 8009cf8: 4299 cmp r1, r3 + 8009cfa: d002 beq.n 8009d02 <__swsetup_r+0x46> + 8009cfc: 4628 mov r0, r5 + 8009cfe: f7fe ffdf bl 8008cc0 <_free_r> + 8009d02: 2300 movs r3, #0 + 8009d04: 6363 str r3, [r4, #52] @ 0x34 + 8009d06: 89a3 ldrh r3, [r4, #12] + 8009d08: f023 0324 bic.w r3, r3, #36 @ 0x24 + 8009d0c: 81a3 strh r3, [r4, #12] + 8009d0e: 2300 movs r3, #0 + 8009d10: 6063 str r3, [r4, #4] + 8009d12: 6923 ldr r3, [r4, #16] + 8009d14: 6023 str r3, [r4, #0] + 8009d16: 89a3 ldrh r3, [r4, #12] + 8009d18: f043 0308 orr.w r3, r3, #8 + 8009d1c: 81a3 strh r3, [r4, #12] + 8009d1e: 6923 ldr r3, [r4, #16] + 8009d20: b94b cbnz r3, 8009d36 <__swsetup_r+0x7a> + 8009d22: 89a3 ldrh r3, [r4, #12] + 8009d24: f403 7320 and.w r3, r3, #640 @ 0x280 + 8009d28: f5b3 7f00 cmp.w r3, #512 @ 0x200 + 8009d2c: d003 beq.n 8009d36 <__swsetup_r+0x7a> + 8009d2e: 4621 mov r1, r4 + 8009d30: 4628 mov r0, r5 + 8009d32: f000 f909 bl 8009f48 <__smakebuf_r> + 8009d36: f9b4 300c ldrsh.w r3, [r4, #12] + 8009d3a: f013 0201 ands.w r2, r3, #1 + 8009d3e: d00a beq.n 8009d56 <__swsetup_r+0x9a> + 8009d40: 2200 movs r2, #0 + 8009d42: 60a2 str r2, [r4, #8] + 8009d44: 6962 ldr r2, [r4, #20] + 8009d46: 4252 negs r2, r2 + 8009d48: 61a2 str r2, [r4, #24] + 8009d4a: 6922 ldr r2, [r4, #16] + 8009d4c: b942 cbnz r2, 8009d60 <__swsetup_r+0xa4> + 8009d4e: f013 0080 ands.w r0, r3, #128 @ 0x80 + 8009d52: d1c5 bne.n 8009ce0 <__swsetup_r+0x24> + 8009d54: bd38 pop {r3, r4, r5, pc} + 8009d56: 0799 lsls r1, r3, #30 + 8009d58: bf58 it pl + 8009d5a: 6962 ldrpl r2, [r4, #20] + 8009d5c: 60a2 str r2, [r4, #8] + 8009d5e: e7f4 b.n 8009d4a <__swsetup_r+0x8e> + 8009d60: 2000 movs r0, #0 + 8009d62: e7f7 b.n 8009d54 <__swsetup_r+0x98> + 8009d64: 20000018 .word 0x20000018 + +08009d68 : + 8009d68: 4288 cmp r0, r1 + 8009d6a: b510 push {r4, lr} + 8009d6c: eb01 0402 add.w r4, r1, r2 + 8009d70: d902 bls.n 8009d78 + 8009d72: 4284 cmp r4, r0 + 8009d74: 4623 mov r3, r4 + 8009d76: d807 bhi.n 8009d88 + 8009d78: 1e43 subs r3, r0, #1 + 8009d7a: 42a1 cmp r1, r4 + 8009d7c: d008 beq.n 8009d90 + 8009d7e: f811 2b01 ldrb.w r2, [r1], #1 + 8009d82: f803 2f01 strb.w r2, [r3, #1]! + 8009d86: e7f8 b.n 8009d7a + 8009d88: 4402 add r2, r0 + 8009d8a: 4601 mov r1, r0 + 8009d8c: 428a cmp r2, r1 + 8009d8e: d100 bne.n 8009d92 + 8009d90: bd10 pop {r4, pc} + 8009d92: f813 4d01 ldrb.w r4, [r3, #-1]! + 8009d96: f802 4d01 strb.w r4, [r2, #-1]! + 8009d9a: e7f7 b.n 8009d8c + +08009d9c <_sbrk_r>: + 8009d9c: b538 push {r3, r4, r5, lr} + 8009d9e: 4d06 ldr r5, [pc, #24] @ (8009db8 <_sbrk_r+0x1c>) + 8009da0: 2300 movs r3, #0 + 8009da2: 4604 mov r4, r0 + 8009da4: 4608 mov r0, r1 + 8009da6: 602b str r3, [r5, #0] + 8009da8: f7fa f8d6 bl 8003f58 <_sbrk> + 8009dac: 1c43 adds r3, r0, #1 + 8009dae: d102 bne.n 8009db6 <_sbrk_r+0x1a> + 8009db0: 682b ldr r3, [r5, #0] + 8009db2: b103 cbz r3, 8009db6 <_sbrk_r+0x1a> + 8009db4: 6023 str r3, [r4, #0] + 8009db6: bd38 pop {r3, r4, r5, pc} + 8009db8: 200004e0 .word 0x200004e0 + +08009dbc : + 8009dbc: 440a add r2, r1 + 8009dbe: 4291 cmp r1, r2 + 8009dc0: f100 33ff add.w r3, r0, #4294967295 + 8009dc4: d100 bne.n 8009dc8 + 8009dc6: 4770 bx lr + 8009dc8: b510 push {r4, lr} + 8009dca: f811 4b01 ldrb.w r4, [r1], #1 + 8009dce: f803 4f01 strb.w r4, [r3, #1]! + 8009dd2: 4291 cmp r1, r2 + 8009dd4: d1f9 bne.n 8009dca + 8009dd6: bd10 pop {r4, pc} + +08009dd8 <__assert_func>: + 8009dd8: b51f push {r0, r1, r2, r3, r4, lr} + 8009dda: 4614 mov r4, r2 + 8009ddc: 461a mov r2, r3 + 8009dde: 4b09 ldr r3, [pc, #36] @ (8009e04 <__assert_func+0x2c>) + 8009de0: 681b ldr r3, [r3, #0] + 8009de2: 4605 mov r5, r0 + 8009de4: 68d8 ldr r0, [r3, #12] + 8009de6: b14c cbz r4, 8009dfc <__assert_func+0x24> + 8009de8: 4b07 ldr r3, [pc, #28] @ (8009e08 <__assert_func+0x30>) + 8009dea: 9100 str r1, [sp, #0] + 8009dec: e9cd 3401 strd r3, r4, [sp, #4] + 8009df0: 4906 ldr r1, [pc, #24] @ (8009e0c <__assert_func+0x34>) + 8009df2: 462b mov r3, r5 + 8009df4: f000 f870 bl 8009ed8 + 8009df8: f000 f904 bl 800a004 + 8009dfc: 4b04 ldr r3, [pc, #16] @ (8009e10 <__assert_func+0x38>) + 8009dfe: 461c mov r4, r3 + 8009e00: e7f3 b.n 8009dea <__assert_func+0x12> + 8009e02: bf00 nop + 8009e04: 20000018 .word 0x20000018 + 8009e08: 0800ba71 .word 0x0800ba71 + 8009e0c: 0800ba7e .word 0x0800ba7e + 8009e10: 0800baac .word 0x0800baac + +08009e14 <_calloc_r>: + 8009e14: b570 push {r4, r5, r6, lr} + 8009e16: fba1 5402 umull r5, r4, r1, r2 + 8009e1a: b934 cbnz r4, 8009e2a <_calloc_r+0x16> + 8009e1c: 4629 mov r1, r5 + 8009e1e: f7fe ffc3 bl 8008da8 <_malloc_r> + 8009e22: 4606 mov r6, r0 + 8009e24: b928 cbnz r0, 8009e32 <_calloc_r+0x1e> + 8009e26: 4630 mov r0, r6 + 8009e28: bd70 pop {r4, r5, r6, pc} + 8009e2a: 220c movs r2, #12 + 8009e2c: 6002 str r2, [r0, #0] + 8009e2e: 2600 movs r6, #0 + 8009e30: e7f9 b.n 8009e26 <_calloc_r+0x12> + 8009e32: 462a mov r2, r5 + 8009e34: 4621 mov r1, r4 + 8009e36: f7fe f86a bl 8007f0e + 8009e3a: e7f4 b.n 8009e26 <_calloc_r+0x12> + +08009e3c <__ascii_mbtowc>: + 8009e3c: b082 sub sp, #8 + 8009e3e: b901 cbnz r1, 8009e42 <__ascii_mbtowc+0x6> + 8009e40: a901 add r1, sp, #4 + 8009e42: b142 cbz r2, 8009e56 <__ascii_mbtowc+0x1a> + 8009e44: b14b cbz r3, 8009e5a <__ascii_mbtowc+0x1e> + 8009e46: 7813 ldrb r3, [r2, #0] + 8009e48: 600b str r3, [r1, #0] + 8009e4a: 7812 ldrb r2, [r2, #0] + 8009e4c: 1e10 subs r0, r2, #0 + 8009e4e: bf18 it ne + 8009e50: 2001 movne r0, #1 + 8009e52: b002 add sp, #8 + 8009e54: 4770 bx lr + 8009e56: 4610 mov r0, r2 + 8009e58: e7fb b.n 8009e52 <__ascii_mbtowc+0x16> + 8009e5a: f06f 0001 mvn.w r0, #1 + 8009e5e: e7f8 b.n 8009e52 <__ascii_mbtowc+0x16> + +08009e60 <_realloc_r>: + 8009e60: e92d 41f0 stmdb sp!, {r4, r5, r6, r7, r8, lr} + 8009e64: 4607 mov r7, r0 + 8009e66: 4614 mov r4, r2 + 8009e68: 460d mov r5, r1 + 8009e6a: b921 cbnz r1, 8009e76 <_realloc_r+0x16> + 8009e6c: e8bd 41f0 ldmia.w sp!, {r4, r5, r6, r7, r8, lr} + 8009e70: 4611 mov r1, r2 + 8009e72: f7fe bf99 b.w 8008da8 <_malloc_r> + 8009e76: b92a cbnz r2, 8009e84 <_realloc_r+0x24> + 8009e78: f7fe ff22 bl 8008cc0 <_free_r> + 8009e7c: 4625 mov r5, r4 + 8009e7e: 4628 mov r0, r5 + 8009e80: e8bd 81f0 ldmia.w sp!, {r4, r5, r6, r7, r8, pc} + 8009e84: f000 f8c5 bl 800a012 <_malloc_usable_size_r> + 8009e88: 4284 cmp r4, r0 + 8009e8a: 4606 mov r6, r0 + 8009e8c: d802 bhi.n 8009e94 <_realloc_r+0x34> + 8009e8e: ebb4 0f50 cmp.w r4, r0, lsr #1 + 8009e92: d8f4 bhi.n 8009e7e <_realloc_r+0x1e> + 8009e94: 4621 mov r1, r4 + 8009e96: 4638 mov r0, r7 + 8009e98: f7fe ff86 bl 8008da8 <_malloc_r> + 8009e9c: 4680 mov r8, r0 + 8009e9e: b908 cbnz r0, 8009ea4 <_realloc_r+0x44> + 8009ea0: 4645 mov r5, r8 + 8009ea2: e7ec b.n 8009e7e <_realloc_r+0x1e> + 8009ea4: 42b4 cmp r4, r6 + 8009ea6: 4622 mov r2, r4 + 8009ea8: 4629 mov r1, r5 + 8009eaa: bf28 it cs + 8009eac: 4632 movcs r2, r6 + 8009eae: f7ff ff85 bl 8009dbc + 8009eb2: 4629 mov r1, r5 + 8009eb4: 4638 mov r0, r7 + 8009eb6: f7fe ff03 bl 8008cc0 <_free_r> + 8009eba: e7f1 b.n 8009ea0 <_realloc_r+0x40> + +08009ebc <__ascii_wctomb>: + 8009ebc: 4603 mov r3, r0 + 8009ebe: 4608 mov r0, r1 + 8009ec0: b141 cbz r1, 8009ed4 <__ascii_wctomb+0x18> + 8009ec2: 2aff cmp r2, #255 @ 0xff + 8009ec4: d904 bls.n 8009ed0 <__ascii_wctomb+0x14> + 8009ec6: 228a movs r2, #138 @ 0x8a + 8009ec8: 601a str r2, [r3, #0] + 8009eca: f04f 30ff mov.w r0, #4294967295 + 8009ece: 4770 bx lr + 8009ed0: 700a strb r2, [r1, #0] + 8009ed2: 2001 movs r0, #1 + 8009ed4: 4770 bx lr + ... + +08009ed8 : + 8009ed8: b40e push {r1, r2, r3} + 8009eda: b503 push {r0, r1, lr} + 8009edc: 4601 mov r1, r0 + 8009ede: ab03 add r3, sp, #12 + 8009ee0: 4805 ldr r0, [pc, #20] @ (8009ef8 ) + 8009ee2: f853 2b04 ldr.w r2, [r3], #4 + 8009ee6: 6800 ldr r0, [r0, #0] + 8009ee8: 9301 str r3, [sp, #4] + 8009eea: f7ff fce5 bl 80098b8 <_vfiprintf_r> + 8009eee: b002 add sp, #8 + 8009ef0: f85d eb04 ldr.w lr, [sp], #4 + 8009ef4: b003 add sp, #12 + 8009ef6: 4770 bx lr + 8009ef8: 20000018 .word 0x20000018 + +08009efc <__swhatbuf_r>: + 8009efc: b570 push {r4, r5, r6, lr} + 8009efe: 460c mov r4, r1 + 8009f00: f9b1 100e ldrsh.w r1, [r1, #14] + 8009f04: 2900 cmp r1, #0 + 8009f06: b096 sub sp, #88 @ 0x58 + 8009f08: 4615 mov r5, r2 + 8009f0a: 461e mov r6, r3 + 8009f0c: da0d bge.n 8009f2a <__swhatbuf_r+0x2e> + 8009f0e: 89a3 ldrh r3, [r4, #12] + 8009f10: f013 0f80 tst.w r3, #128 @ 0x80 + 8009f14: f04f 0100 mov.w r1, #0 + 8009f18: bf14 ite ne + 8009f1a: 2340 movne r3, #64 @ 0x40 + 8009f1c: f44f 6380 moveq.w r3, #1024 @ 0x400 + 8009f20: 2000 movs r0, #0 + 8009f22: 6031 str r1, [r6, #0] + 8009f24: 602b str r3, [r5, #0] + 8009f26: b016 add sp, #88 @ 0x58 + 8009f28: bd70 pop {r4, r5, r6, pc} + 8009f2a: 466a mov r2, sp + 8009f2c: f000 f848 bl 8009fc0 <_fstat_r> + 8009f30: 2800 cmp r0, #0 + 8009f32: dbec blt.n 8009f0e <__swhatbuf_r+0x12> + 8009f34: 9901 ldr r1, [sp, #4] + 8009f36: f401 4170 and.w r1, r1, #61440 @ 0xf000 + 8009f3a: f5a1 5300 sub.w r3, r1, #8192 @ 0x2000 + 8009f3e: 4259 negs r1, r3 + 8009f40: 4159 adcs r1, r3 + 8009f42: f44f 6380 mov.w r3, #1024 @ 0x400 + 8009f46: e7eb b.n 8009f20 <__swhatbuf_r+0x24> + +08009f48 <__smakebuf_r>: + 8009f48: 898b ldrh r3, [r1, #12] + 8009f4a: b5f7 push {r0, r1, r2, r4, r5, r6, r7, lr} + 8009f4c: 079d lsls r5, r3, #30 + 8009f4e: 4606 mov r6, r0 + 8009f50: 460c mov r4, r1 + 8009f52: d507 bpl.n 8009f64 <__smakebuf_r+0x1c> + 8009f54: f104 0347 add.w r3, r4, #71 @ 0x47 + 8009f58: 6023 str r3, [r4, #0] + 8009f5a: 6123 str r3, [r4, #16] + 8009f5c: 2301 movs r3, #1 + 8009f5e: 6163 str r3, [r4, #20] + 8009f60: b003 add sp, #12 + 8009f62: bdf0 pop {r4, r5, r6, r7, pc} + 8009f64: ab01 add r3, sp, #4 + 8009f66: 466a mov r2, sp + 8009f68: f7ff ffc8 bl 8009efc <__swhatbuf_r> + 8009f6c: 9f00 ldr r7, [sp, #0] + 8009f6e: 4605 mov r5, r0 + 8009f70: 4639 mov r1, r7 + 8009f72: 4630 mov r0, r6 + 8009f74: f7fe ff18 bl 8008da8 <_malloc_r> + 8009f78: b948 cbnz r0, 8009f8e <__smakebuf_r+0x46> + 8009f7a: f9b4 300c ldrsh.w r3, [r4, #12] + 8009f7e: 059a lsls r2, r3, #22 + 8009f80: d4ee bmi.n 8009f60 <__smakebuf_r+0x18> + 8009f82: f023 0303 bic.w r3, r3, #3 + 8009f86: f043 0302 orr.w r3, r3, #2 + 8009f8a: 81a3 strh r3, [r4, #12] + 8009f8c: e7e2 b.n 8009f54 <__smakebuf_r+0xc> + 8009f8e: 89a3 ldrh r3, [r4, #12] + 8009f90: 6020 str r0, [r4, #0] + 8009f92: f043 0380 orr.w r3, r3, #128 @ 0x80 + 8009f96: 81a3 strh r3, [r4, #12] + 8009f98: 9b01 ldr r3, [sp, #4] + 8009f9a: e9c4 0704 strd r0, r7, [r4, #16] + 8009f9e: b15b cbz r3, 8009fb8 <__smakebuf_r+0x70> + 8009fa0: f9b4 100e ldrsh.w r1, [r4, #14] + 8009fa4: 4630 mov r0, r6 + 8009fa6: f000 f81d bl 8009fe4 <_isatty_r> + 8009faa: b128 cbz r0, 8009fb8 <__smakebuf_r+0x70> + 8009fac: 89a3 ldrh r3, [r4, #12] + 8009fae: f023 0303 bic.w r3, r3, #3 + 8009fb2: f043 0301 orr.w r3, r3, #1 + 8009fb6: 81a3 strh r3, [r4, #12] + 8009fb8: 89a3 ldrh r3, [r4, #12] + 8009fba: 431d orrs r5, r3 + 8009fbc: 81a5 strh r5, [r4, #12] + 8009fbe: e7cf b.n 8009f60 <__smakebuf_r+0x18> + +08009fc0 <_fstat_r>: + 8009fc0: b538 push {r3, r4, r5, lr} + 8009fc2: 4d07 ldr r5, [pc, #28] @ (8009fe0 <_fstat_r+0x20>) + 8009fc4: 2300 movs r3, #0 + 8009fc6: 4604 mov r4, r0 + 8009fc8: 4608 mov r0, r1 + 8009fca: 4611 mov r1, r2 + 8009fcc: 602b str r3, [r5, #0] + 8009fce: f7f9 ff9a bl 8003f06 <_fstat> + 8009fd2: 1c43 adds r3, r0, #1 + 8009fd4: d102 bne.n 8009fdc <_fstat_r+0x1c> + 8009fd6: 682b ldr r3, [r5, #0] + 8009fd8: b103 cbz r3, 8009fdc <_fstat_r+0x1c> + 8009fda: 6023 str r3, [r4, #0] + 8009fdc: bd38 pop {r3, r4, r5, pc} + 8009fde: bf00 nop + 8009fe0: 200004e0 .word 0x200004e0 + +08009fe4 <_isatty_r>: + 8009fe4: b538 push {r3, r4, r5, lr} + 8009fe6: 4d06 ldr r5, [pc, #24] @ (800a000 <_isatty_r+0x1c>) + 8009fe8: 2300 movs r3, #0 + 8009fea: 4604 mov r4, r0 + 8009fec: 4608 mov r0, r1 + 8009fee: 602b str r3, [r5, #0] + 8009ff0: f7f9 ff99 bl 8003f26 <_isatty> + 8009ff4: 1c43 adds r3, r0, #1 + 8009ff6: d102 bne.n 8009ffe <_isatty_r+0x1a> + 8009ff8: 682b ldr r3, [r5, #0] + 8009ffa: b103 cbz r3, 8009ffe <_isatty_r+0x1a> + 8009ffc: 6023 str r3, [r4, #0] + 8009ffe: bd38 pop {r3, r4, r5, pc} + 800a000: 200004e0 .word 0x200004e0 + +0800a004 : + 800a004: b508 push {r3, lr} + 800a006: 2006 movs r0, #6 + 800a008: f000 f834 bl 800a074 + 800a00c: 2001 movs r0, #1 + 800a00e: f7f9 ff2a bl 8003e66 <_exit> + +0800a012 <_malloc_usable_size_r>: + 800a012: f851 3c04 ldr.w r3, [r1, #-4] + 800a016: 1f18 subs r0, r3, #4 + 800a018: 2b00 cmp r3, #0 + 800a01a: bfbc itt lt + 800a01c: 580b ldrlt r3, [r1, r0] + 800a01e: 18c0 addlt r0, r0, r3 + 800a020: 4770 bx lr + +0800a022 <_raise_r>: + 800a022: 291f cmp r1, #31 + 800a024: b538 push {r3, r4, r5, lr} + 800a026: 4605 mov r5, r0 + 800a028: 460c mov r4, r1 + 800a02a: d904 bls.n 800a036 <_raise_r+0x14> + 800a02c: 2316 movs r3, #22 + 800a02e: 6003 str r3, [r0, #0] + 800a030: f04f 30ff mov.w r0, #4294967295 + 800a034: bd38 pop {r3, r4, r5, pc} + 800a036: 6bc2 ldr r2, [r0, #60] @ 0x3c + 800a038: b112 cbz r2, 800a040 <_raise_r+0x1e> + 800a03a: f852 3021 ldr.w r3, [r2, r1, lsl #2] + 800a03e: b94b cbnz r3, 800a054 <_raise_r+0x32> + 800a040: 4628 mov r0, r5 + 800a042: f000 f831 bl 800a0a8 <_getpid_r> + 800a046: 4622 mov r2, r4 + 800a048: 4601 mov r1, r0 + 800a04a: 4628 mov r0, r5 + 800a04c: e8bd 4038 ldmia.w sp!, {r3, r4, r5, lr} + 800a050: f000 b818 b.w 800a084 <_kill_r> + 800a054: 2b01 cmp r3, #1 + 800a056: d00a beq.n 800a06e <_raise_r+0x4c> + 800a058: 1c59 adds r1, r3, #1 + 800a05a: d103 bne.n 800a064 <_raise_r+0x42> + 800a05c: 2316 movs r3, #22 + 800a05e: 6003 str r3, [r0, #0] + 800a060: 2001 movs r0, #1 + 800a062: e7e7 b.n 800a034 <_raise_r+0x12> + 800a064: 2100 movs r1, #0 + 800a066: f842 1024 str.w r1, [r2, r4, lsl #2] + 800a06a: 4620 mov r0, r4 + 800a06c: 4798 blx r3 + 800a06e: 2000 movs r0, #0 + 800a070: e7e0 b.n 800a034 <_raise_r+0x12> + ... + +0800a074 : + 800a074: 4b02 ldr r3, [pc, #8] @ (800a080 ) + 800a076: 4601 mov r1, r0 + 800a078: 6818 ldr r0, [r3, #0] + 800a07a: f7ff bfd2 b.w 800a022 <_raise_r> + 800a07e: bf00 nop + 800a080: 20000018 .word 0x20000018 + +0800a084 <_kill_r>: + 800a084: b538 push {r3, r4, r5, lr} + 800a086: 4d07 ldr r5, [pc, #28] @ (800a0a4 <_kill_r+0x20>) + 800a088: 2300 movs r3, #0 + 800a08a: 4604 mov r4, r0 + 800a08c: 4608 mov r0, r1 + 800a08e: 4611 mov r1, r2 + 800a090: 602b str r3, [r5, #0] + 800a092: f7f9 fed8 bl 8003e46 <_kill> + 800a096: 1c43 adds r3, r0, #1 + 800a098: d102 bne.n 800a0a0 <_kill_r+0x1c> + 800a09a: 682b ldr r3, [r5, #0] + 800a09c: b103 cbz r3, 800a0a0 <_kill_r+0x1c> + 800a09e: 6023 str r3, [r4, #0] + 800a0a0: bd38 pop {r3, r4, r5, pc} + 800a0a2: bf00 nop + 800a0a4: 200004e0 .word 0x200004e0 + +0800a0a8 <_getpid_r>: + 800a0a8: f7f9 bec5 b.w 8003e36 <_getpid> + +0800a0ac : + 800a0ac: b508 push {r3, lr} + 800a0ae: ed2d 8b02 vpush {d8} + 800a0b2: eeb0 8a40 vmov.f32 s16, s0 + 800a0b6: f000 f99f bl 800a3f8 <__ieee754_asinf> + 800a0ba: eeb4 8a48 vcmp.f32 s16, s16 + 800a0be: eef1 fa10 vmrs APSR_nzcv, fpscr + 800a0c2: eef0 8a40 vmov.f32 s17, s0 + 800a0c6: d615 bvs.n 800a0f4 + 800a0c8: eeb0 0a48 vmov.f32 s0, s16 + 800a0cc: f000 f892 bl 800a1f4 + 800a0d0: eef7 7a00 vmov.f32 s15, #112 @ 0x3f800000 1.0 + 800a0d4: eeb4 0ae7 vcmpe.f32 s0, s15 + 800a0d8: eef1 fa10 vmrs APSR_nzcv, fpscr + 800a0dc: dd0a ble.n 800a0f4 + 800a0de: f7fd ff69 bl 8007fb4 <__errno> + 800a0e2: ecbd 8b02 vpop {d8} + 800a0e6: 2321 movs r3, #33 @ 0x21 + 800a0e8: 6003 str r3, [r0, #0] + 800a0ea: e8bd 4008 ldmia.w sp!, {r3, lr} + 800a0ee: 4804 ldr r0, [pc, #16] @ (800a100 ) + 800a0f0: f000 b8d8 b.w 800a2a4 + 800a0f4: eeb0 0a68 vmov.f32 s0, s17 + 800a0f8: ecbd 8b02 vpop {d8} + 800a0fc: bd08 pop {r3, pc} + 800a0fe: bf00 nop + 800a100: 0800baac .word 0x0800baac + +0800a104 : + 800a104: f000 ba5c b.w 800a5c0 <__ieee754_atan2f> + +0800a108 : + 800a108: b508 push {r3, lr} + 800a10a: ed2d 8b04 vpush {d8-d9} + 800a10e: eeb0 8a60 vmov.f32 s16, s1 + 800a112: eeb0 9a40 vmov.f32 s18, s0 + 800a116: f000 faf3 bl 800a700 <__ieee754_powf> + 800a11a: eeb4 8a48 vcmp.f32 s16, s16 + 800a11e: eef1 fa10 vmrs APSR_nzcv, fpscr + 800a122: eef0 8a40 vmov.f32 s17, s0 + 800a126: d63e bvs.n 800a1a6 + 800a128: eeb5 9a40 vcmp.f32 s18, #0.0 + 800a12c: eef1 fa10 vmrs APSR_nzcv, fpscr + 800a130: d112 bne.n 800a158 + 800a132: eeb5 8a40 vcmp.f32 s16, #0.0 + 800a136: eef1 fa10 vmrs APSR_nzcv, fpscr + 800a13a: d039 beq.n 800a1b0 + 800a13c: eeb0 0a48 vmov.f32 s0, s16 + 800a140: f000 f8a6 bl 800a290 + 800a144: b378 cbz r0, 800a1a6 + 800a146: eeb5 8ac0 vcmpe.f32 s16, #0.0 + 800a14a: eef1 fa10 vmrs APSR_nzcv, fpscr + 800a14e: d52a bpl.n 800a1a6 + 800a150: f7fd ff30 bl 8007fb4 <__errno> + 800a154: 2322 movs r3, #34 @ 0x22 + 800a156: e014 b.n 800a182 + 800a158: f000 f89a bl 800a290 + 800a15c: b998 cbnz r0, 800a186 + 800a15e: eeb0 0a49 vmov.f32 s0, s18 + 800a162: f000 f895 bl 800a290 + 800a166: b170 cbz r0, 800a186 + 800a168: eeb0 0a48 vmov.f32 s0, s16 + 800a16c: f000 f890 bl 800a290 + 800a170: b148 cbz r0, 800a186 + 800a172: eef4 8a68 vcmp.f32 s17, s17 + 800a176: eef1 fa10 vmrs APSR_nzcv, fpscr + 800a17a: d7e9 bvc.n 800a150 + 800a17c: f7fd ff1a bl 8007fb4 <__errno> + 800a180: 2321 movs r3, #33 @ 0x21 + 800a182: 6003 str r3, [r0, #0] + 800a184: e00f b.n 800a1a6 + 800a186: eef5 8a40 vcmp.f32 s17, #0.0 + 800a18a: eef1 fa10 vmrs APSR_nzcv, fpscr + 800a18e: d10a bne.n 800a1a6 + 800a190: eeb0 0a49 vmov.f32 s0, s18 + 800a194: f000 f87c bl 800a290 + 800a198: b128 cbz r0, 800a1a6 + 800a19a: eeb0 0a48 vmov.f32 s0, s16 + 800a19e: f000 f877 bl 800a290 + 800a1a2: 2800 cmp r0, #0 + 800a1a4: d1d4 bne.n 800a150 + 800a1a6: eeb0 0a68 vmov.f32 s0, s17 + 800a1aa: ecbd 8b04 vpop {d8-d9} + 800a1ae: bd08 pop {r3, pc} + 800a1b0: eef7 8a00 vmov.f32 s17, #112 @ 0x3f800000 1.0 + 800a1b4: e7f7 b.n 800a1a6 + ... + +0800a1b8 : + 800a1b8: b508 push {r3, lr} + 800a1ba: ed2d 8b02 vpush {d8} + 800a1be: eeb0 8a40 vmov.f32 s16, s0 + 800a1c2: f000 f875 bl 800a2b0 <__ieee754_sqrtf> + 800a1c6: eeb4 8a48 vcmp.f32 s16, s16 + 800a1ca: eef1 fa10 vmrs APSR_nzcv, fpscr + 800a1ce: d60c bvs.n 800a1ea + 800a1d0: eddf 8a07 vldr s17, [pc, #28] @ 800a1f0 + 800a1d4: eeb4 8ae8 vcmpe.f32 s16, s17 + 800a1d8: eef1 fa10 vmrs APSR_nzcv, fpscr + 800a1dc: d505 bpl.n 800a1ea + 800a1de: f7fd fee9 bl 8007fb4 <__errno> + 800a1e2: ee88 0aa8 vdiv.f32 s0, s17, s17 + 800a1e6: 2321 movs r3, #33 @ 0x21 + 800a1e8: 6003 str r3, [r0, #0] + 800a1ea: ecbd 8b02 vpop {d8} + 800a1ee: bd08 pop {r3, pc} + 800a1f0: 00000000 .word 0x00000000 + +0800a1f4 : + 800a1f4: ee10 3a10 vmov r3, s0 + 800a1f8: f023 4300 bic.w r3, r3, #2147483648 @ 0x80000000 + 800a1fc: ee00 3a10 vmov s0, r3 + 800a200: 4770 bx lr + ... + +0800a204 : + 800a204: ee10 3a10 vmov r3, s0 + 800a208: b507 push {r0, r1, r2, lr} + 800a20a: 4a1f ldr r2, [pc, #124] @ (800a288 ) + 800a20c: f023 4300 bic.w r3, r3, #2147483648 @ 0x80000000 + 800a210: 4293 cmp r3, r2 + 800a212: d807 bhi.n 800a224 + 800a214: eddf 0a1d vldr s1, [pc, #116] @ 800a28c + 800a218: 2000 movs r0, #0 + 800a21a: b003 add sp, #12 + 800a21c: f85d eb04 ldr.w lr, [sp], #4 + 800a220: f000 b8a2 b.w 800a368 <__kernel_sinf> + 800a224: f1b3 4fff cmp.w r3, #2139095040 @ 0x7f800000 + 800a228: d304 bcc.n 800a234 + 800a22a: ee30 0a40 vsub.f32 s0, s0, s0 + 800a22e: b003 add sp, #12 + 800a230: f85d fb04 ldr.w pc, [sp], #4 + 800a234: 4668 mov r0, sp + 800a236: f000 fd31 bl 800ac9c <__ieee754_rem_pio2f> + 800a23a: f000 0003 and.w r0, r0, #3 + 800a23e: 2801 cmp r0, #1 + 800a240: d00a beq.n 800a258 + 800a242: 2802 cmp r0, #2 + 800a244: d00f beq.n 800a266 + 800a246: b9c0 cbnz r0, 800a27a + 800a248: eddd 0a01 vldr s1, [sp, #4] + 800a24c: ed9d 0a00 vldr s0, [sp] + 800a250: 2001 movs r0, #1 + 800a252: f000 f889 bl 800a368 <__kernel_sinf> + 800a256: e7ea b.n 800a22e + 800a258: eddd 0a01 vldr s1, [sp, #4] + 800a25c: ed9d 0a00 vldr s0, [sp] + 800a260: f000 f82a bl 800a2b8 <__kernel_cosf> + 800a264: e7e3 b.n 800a22e + 800a266: eddd 0a01 vldr s1, [sp, #4] + 800a26a: ed9d 0a00 vldr s0, [sp] + 800a26e: 2001 movs r0, #1 + 800a270: f000 f87a bl 800a368 <__kernel_sinf> + 800a274: eeb1 0a40 vneg.f32 s0, s0 + 800a278: e7d9 b.n 800a22e + 800a27a: eddd 0a01 vldr s1, [sp, #4] + 800a27e: ed9d 0a00 vldr s0, [sp] + 800a282: f000 f819 bl 800a2b8 <__kernel_cosf> + 800a286: e7f5 b.n 800a274 + 800a288: 3f490fd8 .word 0x3f490fd8 + 800a28c: 00000000 .word 0x00000000 + +0800a290 : + 800a290: ee10 3a10 vmov r3, s0 + 800a294: f023 4000 bic.w r0, r3, #2147483648 @ 0x80000000 + 800a298: f1b0 4fff cmp.w r0, #2139095040 @ 0x7f800000 + 800a29c: bfac ite ge + 800a29e: 2000 movge r0, #0 + 800a2a0: 2001 movlt r0, #1 + 800a2a2: 4770 bx lr + +0800a2a4 : + 800a2a4: ed9f 0a01 vldr s0, [pc, #4] @ 800a2ac + 800a2a8: 4770 bx lr + 800a2aa: bf00 nop + 800a2ac: 7fc00000 .word 0x7fc00000 + +0800a2b0 <__ieee754_sqrtf>: + 800a2b0: eeb1 0ac0 vsqrt.f32 s0, s0 + 800a2b4: 4770 bx lr + ... + +0800a2b8 <__kernel_cosf>: + 800a2b8: ee10 3a10 vmov r3, s0 + 800a2bc: f023 4300 bic.w r3, r3, #2147483648 @ 0x80000000 + 800a2c0: f1b3 5f48 cmp.w r3, #838860800 @ 0x32000000 + 800a2c4: eef0 6a40 vmov.f32 s13, s0 + 800a2c8: eeb7 0a00 vmov.f32 s0, #112 @ 0x3f800000 1.0 + 800a2cc: d204 bcs.n 800a2d8 <__kernel_cosf+0x20> + 800a2ce: eefd 7ae6 vcvt.s32.f32 s15, s13 + 800a2d2: ee17 2a90 vmov r2, s15 + 800a2d6: b342 cbz r2, 800a32a <__kernel_cosf+0x72> + 800a2d8: ee26 7aa6 vmul.f32 s14, s13, s13 + 800a2dc: eddf 7a1a vldr s15, [pc, #104] @ 800a348 <__kernel_cosf+0x90> + 800a2e0: ed9f 6a1a vldr s12, [pc, #104] @ 800a34c <__kernel_cosf+0x94> + 800a2e4: 4a1a ldr r2, [pc, #104] @ (800a350 <__kernel_cosf+0x98>) + 800a2e6: eea7 6a27 vfma.f32 s12, s14, s15 + 800a2ea: 4293 cmp r3, r2 + 800a2ec: eddf 7a19 vldr s15, [pc, #100] @ 800a354 <__kernel_cosf+0x9c> + 800a2f0: eee6 7a07 vfma.f32 s15, s12, s14 + 800a2f4: ed9f 6a18 vldr s12, [pc, #96] @ 800a358 <__kernel_cosf+0xa0> + 800a2f8: eea7 6a87 vfma.f32 s12, s15, s14 + 800a2fc: eddf 7a17 vldr s15, [pc, #92] @ 800a35c <__kernel_cosf+0xa4> + 800a300: eee6 7a07 vfma.f32 s15, s12, s14 + 800a304: ed9f 6a16 vldr s12, [pc, #88] @ 800a360 <__kernel_cosf+0xa8> + 800a308: eea7 6a87 vfma.f32 s12, s15, s14 + 800a30c: ee60 0ae6 vnmul.f32 s1, s1, s13 + 800a310: ee26 6a07 vmul.f32 s12, s12, s14 + 800a314: eef6 7a00 vmov.f32 s15, #96 @ 0x3f000000 0.5 + 800a318: eee7 0a06 vfma.f32 s1, s14, s12 + 800a31c: ee67 7a27 vmul.f32 s15, s14, s15 + 800a320: d804 bhi.n 800a32c <__kernel_cosf+0x74> + 800a322: ee77 7ae0 vsub.f32 s15, s15, s1 + 800a326: ee30 0a67 vsub.f32 s0, s0, s15 + 800a32a: 4770 bx lr + 800a32c: 4a0d ldr r2, [pc, #52] @ (800a364 <__kernel_cosf+0xac>) + 800a32e: 4293 cmp r3, r2 + 800a330: bf9a itte ls + 800a332: f103 437f addls.w r3, r3, #4278190080 @ 0xff000000 + 800a336: ee07 3a10 vmovls s14, r3 + 800a33a: eeb5 7a02 vmovhi.f32 s14, #82 @ 0x3e900000 0.2812500 + 800a33e: ee30 0a47 vsub.f32 s0, s0, s14 + 800a342: ee77 7ac7 vsub.f32 s15, s15, s14 + 800a346: e7ec b.n 800a322 <__kernel_cosf+0x6a> + 800a348: ad47d74e .word 0xad47d74e + 800a34c: 310f74f6 .word 0x310f74f6 + 800a350: 3e999999 .word 0x3e999999 + 800a354: b493f27c .word 0xb493f27c + 800a358: 37d00d01 .word 0x37d00d01 + 800a35c: bab60b61 .word 0xbab60b61 + 800a360: 3d2aaaab .word 0x3d2aaaab + 800a364: 3f480000 .word 0x3f480000 + +0800a368 <__kernel_sinf>: + 800a368: ee10 3a10 vmov r3, s0 + 800a36c: f023 4300 bic.w r3, r3, #2147483648 @ 0x80000000 + 800a370: f1b3 5f48 cmp.w r3, #838860800 @ 0x32000000 + 800a374: d204 bcs.n 800a380 <__kernel_sinf+0x18> + 800a376: eefd 7ac0 vcvt.s32.f32 s15, s0 + 800a37a: ee17 3a90 vmov r3, s15 + 800a37e: b35b cbz r3, 800a3d8 <__kernel_sinf+0x70> + 800a380: ee20 7a00 vmul.f32 s14, s0, s0 + 800a384: eddf 7a15 vldr s15, [pc, #84] @ 800a3dc <__kernel_sinf+0x74> + 800a388: ed9f 6a15 vldr s12, [pc, #84] @ 800a3e0 <__kernel_sinf+0x78> + 800a38c: eea7 6a27 vfma.f32 s12, s14, s15 + 800a390: eddf 7a14 vldr s15, [pc, #80] @ 800a3e4 <__kernel_sinf+0x7c> + 800a394: eee6 7a07 vfma.f32 s15, s12, s14 + 800a398: ed9f 6a13 vldr s12, [pc, #76] @ 800a3e8 <__kernel_sinf+0x80> + 800a39c: eea7 6a87 vfma.f32 s12, s15, s14 + 800a3a0: eddf 7a12 vldr s15, [pc, #72] @ 800a3ec <__kernel_sinf+0x84> + 800a3a4: ee60 6a07 vmul.f32 s13, s0, s14 + 800a3a8: eee6 7a07 vfma.f32 s15, s12, s14 + 800a3ac: b930 cbnz r0, 800a3bc <__kernel_sinf+0x54> + 800a3ae: ed9f 6a10 vldr s12, [pc, #64] @ 800a3f0 <__kernel_sinf+0x88> + 800a3b2: eea7 6a27 vfma.f32 s12, s14, s15 + 800a3b6: eea6 0a26 vfma.f32 s0, s12, s13 + 800a3ba: 4770 bx lr + 800a3bc: ee67 7ae6 vnmul.f32 s15, s15, s13 + 800a3c0: eeb6 6a00 vmov.f32 s12, #96 @ 0x3f000000 0.5 + 800a3c4: eee0 7a86 vfma.f32 s15, s1, s12 + 800a3c8: eed7 0a87 vfnms.f32 s1, s15, s14 + 800a3cc: eddf 7a09 vldr s15, [pc, #36] @ 800a3f4 <__kernel_sinf+0x8c> + 800a3d0: eee6 0aa7 vfma.f32 s1, s13, s15 + 800a3d4: ee30 0a60 vsub.f32 s0, s0, s1 + 800a3d8: 4770 bx lr + 800a3da: bf00 nop + 800a3dc: 2f2ec9d3 .word 0x2f2ec9d3 + 800a3e0: b2d72f34 .word 0xb2d72f34 + 800a3e4: 3638ef1b .word 0x3638ef1b + 800a3e8: b9500d01 .word 0xb9500d01 + 800a3ec: 3c088889 .word 0x3c088889 + 800a3f0: be2aaaab .word 0xbe2aaaab + 800a3f4: 3e2aaaab .word 0x3e2aaaab + +0800a3f8 <__ieee754_asinf>: + 800a3f8: b538 push {r3, r4, r5, lr} + 800a3fa: ee10 5a10 vmov r5, s0 + 800a3fe: f025 4400 bic.w r4, r5, #2147483648 @ 0x80000000 + 800a402: f1b4 5f7e cmp.w r4, #1065353216 @ 0x3f800000 + 800a406: ed2d 8b04 vpush {d8-d9} + 800a40a: d10c bne.n 800a426 <__ieee754_asinf+0x2e> + 800a40c: eddf 7a5c vldr s15, [pc, #368] @ 800a580 <__ieee754_asinf+0x188> + 800a410: ed9f 7a5c vldr s14, [pc, #368] @ 800a584 <__ieee754_asinf+0x18c> + 800a414: ee60 7a27 vmul.f32 s15, s0, s15 + 800a418: eee0 7a07 vfma.f32 s15, s0, s14 + 800a41c: eeb0 0a67 vmov.f32 s0, s15 + 800a420: ecbd 8b04 vpop {d8-d9} + 800a424: bd38 pop {r3, r4, r5, pc} + 800a426: d904 bls.n 800a432 <__ieee754_asinf+0x3a> + 800a428: ee70 7a40 vsub.f32 s15, s0, s0 + 800a42c: ee87 0aa7 vdiv.f32 s0, s15, s15 + 800a430: e7f6 b.n 800a420 <__ieee754_asinf+0x28> + 800a432: f1b4 5f7c cmp.w r4, #1056964608 @ 0x3f000000 + 800a436: eef7 8a00 vmov.f32 s17, #112 @ 0x3f800000 1.0 + 800a43a: d20b bcs.n 800a454 <__ieee754_asinf+0x5c> + 800a43c: f1b4 5f48 cmp.w r4, #838860800 @ 0x32000000 + 800a440: d252 bcs.n 800a4e8 <__ieee754_asinf+0xf0> + 800a442: eddf 7a51 vldr s15, [pc, #324] @ 800a588 <__ieee754_asinf+0x190> + 800a446: ee70 7a27 vadd.f32 s15, s0, s15 + 800a44a: eef4 7ae8 vcmpe.f32 s15, s17 + 800a44e: eef1 fa10 vmrs APSR_nzcv, fpscr + 800a452: dce5 bgt.n 800a420 <__ieee754_asinf+0x28> + 800a454: f7ff fece bl 800a1f4 + 800a458: ee38 8ac0 vsub.f32 s16, s17, s0 + 800a45c: eef6 7a00 vmov.f32 s15, #96 @ 0x3f000000 0.5 + 800a460: ee28 8a27 vmul.f32 s16, s16, s15 + 800a464: ed9f 7a49 vldr s14, [pc, #292] @ 800a58c <__ieee754_asinf+0x194> + 800a468: eddf 7a49 vldr s15, [pc, #292] @ 800a590 <__ieee754_asinf+0x198> + 800a46c: ed9f 9a49 vldr s18, [pc, #292] @ 800a594 <__ieee754_asinf+0x19c> + 800a470: eea8 7a27 vfma.f32 s14, s16, s15 + 800a474: eddf 7a48 vldr s15, [pc, #288] @ 800a598 <__ieee754_asinf+0x1a0> + 800a478: eee7 7a08 vfma.f32 s15, s14, s16 + 800a47c: ed9f 7a47 vldr s14, [pc, #284] @ 800a59c <__ieee754_asinf+0x1a4> + 800a480: eea7 7a88 vfma.f32 s14, s15, s16 + 800a484: eddf 7a46 vldr s15, [pc, #280] @ 800a5a0 <__ieee754_asinf+0x1a8> + 800a488: eee7 7a08 vfma.f32 s15, s14, s16 + 800a48c: ed9f 7a45 vldr s14, [pc, #276] @ 800a5a4 <__ieee754_asinf+0x1ac> + 800a490: eea7 9a88 vfma.f32 s18, s15, s16 + 800a494: eddf 7a44 vldr s15, [pc, #272] @ 800a5a8 <__ieee754_asinf+0x1b0> + 800a498: eee8 7a07 vfma.f32 s15, s16, s14 + 800a49c: ed9f 7a43 vldr s14, [pc, #268] @ 800a5ac <__ieee754_asinf+0x1b4> + 800a4a0: eea7 7a88 vfma.f32 s14, s15, s16 + 800a4a4: eddf 7a42 vldr s15, [pc, #264] @ 800a5b0 <__ieee754_asinf+0x1b8> + 800a4a8: eee7 7a08 vfma.f32 s15, s14, s16 + 800a4ac: eeb0 0a48 vmov.f32 s0, s16 + 800a4b0: eee7 8a88 vfma.f32 s17, s15, s16 + 800a4b4: f7ff fefc bl 800a2b0 <__ieee754_sqrtf> + 800a4b8: 4b3e ldr r3, [pc, #248] @ (800a5b4 <__ieee754_asinf+0x1bc>) + 800a4ba: ee29 9a08 vmul.f32 s18, s18, s16 + 800a4be: 429c cmp r4, r3 + 800a4c0: ee89 6a28 vdiv.f32 s12, s18, s17 + 800a4c4: eef0 6a00 vmov.f32 s13, #0 @ 0x40000000 2.0 + 800a4c8: d93d bls.n 800a546 <__ieee754_asinf+0x14e> + 800a4ca: eea0 0a06 vfma.f32 s0, s0, s12 + 800a4ce: eddf 7a3a vldr s15, [pc, #232] @ 800a5b8 <__ieee754_asinf+0x1c0> + 800a4d2: eee0 7a26 vfma.f32 s15, s0, s13 + 800a4d6: ed9f 0a2b vldr s0, [pc, #172] @ 800a584 <__ieee754_asinf+0x18c> + 800a4da: ee30 0a67 vsub.f32 s0, s0, s15 + 800a4de: 2d00 cmp r5, #0 + 800a4e0: bfd8 it le + 800a4e2: eeb1 0a40 vnegle.f32 s0, s0 + 800a4e6: e79b b.n 800a420 <__ieee754_asinf+0x28> + 800a4e8: ee60 7a00 vmul.f32 s15, s0, s0 + 800a4ec: eddf 6a28 vldr s13, [pc, #160] @ 800a590 <__ieee754_asinf+0x198> + 800a4f0: ed9f 7a26 vldr s14, [pc, #152] @ 800a58c <__ieee754_asinf+0x194> + 800a4f4: ed9f 6a2b vldr s12, [pc, #172] @ 800a5a4 <__ieee754_asinf+0x1ac> + 800a4f8: eea7 7aa6 vfma.f32 s14, s15, s13 + 800a4fc: eddf 6a26 vldr s13, [pc, #152] @ 800a598 <__ieee754_asinf+0x1a0> + 800a500: eee7 6a27 vfma.f32 s13, s14, s15 + 800a504: ed9f 7a25 vldr s14, [pc, #148] @ 800a59c <__ieee754_asinf+0x1a4> + 800a508: eea6 7aa7 vfma.f32 s14, s13, s15 + 800a50c: eddf 6a24 vldr s13, [pc, #144] @ 800a5a0 <__ieee754_asinf+0x1a8> + 800a510: eee7 6a27 vfma.f32 s13, s14, s15 + 800a514: ed9f 7a1f vldr s14, [pc, #124] @ 800a594 <__ieee754_asinf+0x19c> + 800a518: eea6 7aa7 vfma.f32 s14, s13, s15 + 800a51c: eddf 6a22 vldr s13, [pc, #136] @ 800a5a8 <__ieee754_asinf+0x1b0> + 800a520: eee7 6a86 vfma.f32 s13, s15, s12 + 800a524: ed9f 6a21 vldr s12, [pc, #132] @ 800a5ac <__ieee754_asinf+0x1b4> + 800a528: eea6 6aa7 vfma.f32 s12, s13, s15 + 800a52c: eddf 6a20 vldr s13, [pc, #128] @ 800a5b0 <__ieee754_asinf+0x1b8> + 800a530: eee6 6a27 vfma.f32 s13, s12, s15 + 800a534: ee27 7a27 vmul.f32 s14, s14, s15 + 800a538: eee6 8aa7 vfma.f32 s17, s13, s15 + 800a53c: eec7 7a28 vdiv.f32 s15, s14, s17 + 800a540: eea0 0a27 vfma.f32 s0, s0, s15 + 800a544: e76c b.n 800a420 <__ieee754_asinf+0x28> + 800a546: ee10 3a10 vmov r3, s0 + 800a54a: f36f 030b bfc r3, #0, #12 + 800a54e: ee07 3a10 vmov s14, r3 + 800a552: eea7 8a47 vfms.f32 s16, s14, s14 + 800a556: ee70 5a00 vadd.f32 s11, s0, s0 + 800a55a: ee30 0a07 vadd.f32 s0, s0, s14 + 800a55e: eddf 7a08 vldr s15, [pc, #32] @ 800a580 <__ieee754_asinf+0x188> + 800a562: ee88 5a00 vdiv.f32 s10, s16, s0 + 800a566: ed9f 0a15 vldr s0, [pc, #84] @ 800a5bc <__ieee754_asinf+0x1c4> + 800a56a: eee5 7a66 vfms.f32 s15, s10, s13 + 800a56e: eed5 7a86 vfnms.f32 s15, s11, s12 + 800a572: eeb0 6a40 vmov.f32 s12, s0 + 800a576: eea7 6a66 vfms.f32 s12, s14, s13 + 800a57a: ee77 7ac6 vsub.f32 s15, s15, s12 + 800a57e: e7ac b.n 800a4da <__ieee754_asinf+0xe2> + 800a580: b33bbd2e .word 0xb33bbd2e + 800a584: 3fc90fdb .word 0x3fc90fdb + 800a588: 7149f2ca .word 0x7149f2ca + 800a58c: 3a4f7f04 .word 0x3a4f7f04 + 800a590: 3811ef08 .word 0x3811ef08 + 800a594: 3e2aaaab .word 0x3e2aaaab + 800a598: bd241146 .word 0xbd241146 + 800a59c: 3e4e0aa8 .word 0x3e4e0aa8 + 800a5a0: bea6b090 .word 0xbea6b090 + 800a5a4: 3d9dc62e .word 0x3d9dc62e + 800a5a8: bf303361 .word 0xbf303361 + 800a5ac: 4001572d .word 0x4001572d + 800a5b0: c019d139 .word 0xc019d139 + 800a5b4: 3f799999 .word 0x3f799999 + 800a5b8: 333bbd2e .word 0x333bbd2e + 800a5bc: 3f490fdb .word 0x3f490fdb + +0800a5c0 <__ieee754_atan2f>: + 800a5c0: ee10 2a90 vmov r2, s1 + 800a5c4: f022 4100 bic.w r1, r2, #2147483648 @ 0x80000000 + 800a5c8: f1b1 4fff cmp.w r1, #2139095040 @ 0x7f800000 + 800a5cc: b510 push {r4, lr} + 800a5ce: eef0 7a40 vmov.f32 s15, s0 + 800a5d2: d806 bhi.n 800a5e2 <__ieee754_atan2f+0x22> + 800a5d4: ee10 0a10 vmov r0, s0 + 800a5d8: f020 4300 bic.w r3, r0, #2147483648 @ 0x80000000 + 800a5dc: f1b3 4fff cmp.w r3, #2139095040 @ 0x7f800000 + 800a5e0: d904 bls.n 800a5ec <__ieee754_atan2f+0x2c> + 800a5e2: ee77 7aa0 vadd.f32 s15, s15, s1 + 800a5e6: eeb0 0a67 vmov.f32 s0, s15 + 800a5ea: bd10 pop {r4, pc} + 800a5ec: f1b2 5f7e cmp.w r2, #1065353216 @ 0x3f800000 + 800a5f0: d103 bne.n 800a5fa <__ieee754_atan2f+0x3a> + 800a5f2: e8bd 4010 ldmia.w sp!, {r4, lr} + 800a5f6: f000 bc81 b.w 800aefc + 800a5fa: 1794 asrs r4, r2, #30 + 800a5fc: f004 0402 and.w r4, r4, #2 + 800a600: ea44 74d0 orr.w r4, r4, r0, lsr #31 + 800a604: b943 cbnz r3, 800a618 <__ieee754_atan2f+0x58> + 800a606: 2c02 cmp r4, #2 + 800a608: d05e beq.n 800a6c8 <__ieee754_atan2f+0x108> + 800a60a: ed9f 7a34 vldr s14, [pc, #208] @ 800a6dc <__ieee754_atan2f+0x11c> + 800a60e: 2c03 cmp r4, #3 + 800a610: bf08 it eq + 800a612: eef0 7a47 vmoveq.f32 s15, s14 + 800a616: e7e6 b.n 800a5e6 <__ieee754_atan2f+0x26> + 800a618: b941 cbnz r1, 800a62c <__ieee754_atan2f+0x6c> + 800a61a: eddf 7a31 vldr s15, [pc, #196] @ 800a6e0 <__ieee754_atan2f+0x120> + 800a61e: ed9f 7a31 vldr s14, [pc, #196] @ 800a6e4 <__ieee754_atan2f+0x124> + 800a622: 2800 cmp r0, #0 + 800a624: bfa8 it ge + 800a626: eef0 7a47 vmovge.f32 s15, s14 + 800a62a: e7dc b.n 800a5e6 <__ieee754_atan2f+0x26> + 800a62c: f1b1 4fff cmp.w r1, #2139095040 @ 0x7f800000 + 800a630: d110 bne.n 800a654 <__ieee754_atan2f+0x94> + 800a632: f1b3 4fff cmp.w r3, #2139095040 @ 0x7f800000 + 800a636: f104 34ff add.w r4, r4, #4294967295 + 800a63a: d107 bne.n 800a64c <__ieee754_atan2f+0x8c> + 800a63c: 2c02 cmp r4, #2 + 800a63e: d846 bhi.n 800a6ce <__ieee754_atan2f+0x10e> + 800a640: 4b29 ldr r3, [pc, #164] @ (800a6e8 <__ieee754_atan2f+0x128>) + 800a642: eb03 0384 add.w r3, r3, r4, lsl #2 + 800a646: edd3 7a00 vldr s15, [r3] + 800a64a: e7cc b.n 800a5e6 <__ieee754_atan2f+0x26> + 800a64c: 2c02 cmp r4, #2 + 800a64e: d841 bhi.n 800a6d4 <__ieee754_atan2f+0x114> + 800a650: 4b26 ldr r3, [pc, #152] @ (800a6ec <__ieee754_atan2f+0x12c>) + 800a652: e7f6 b.n 800a642 <__ieee754_atan2f+0x82> + 800a654: f1b3 4fff cmp.w r3, #2139095040 @ 0x7f800000 + 800a658: d0df beq.n 800a61a <__ieee754_atan2f+0x5a> + 800a65a: 1a5b subs r3, r3, r1 + 800a65c: f1b3 5ff4 cmp.w r3, #511705088 @ 0x1e800000 + 800a660: ea4f 51e3 mov.w r1, r3, asr #23 + 800a664: da1a bge.n 800a69c <__ieee754_atan2f+0xdc> + 800a666: 2a00 cmp r2, #0 + 800a668: da01 bge.n 800a66e <__ieee754_atan2f+0xae> + 800a66a: 313c adds r1, #60 @ 0x3c + 800a66c: db19 blt.n 800a6a2 <__ieee754_atan2f+0xe2> + 800a66e: ee87 0aa0 vdiv.f32 s0, s15, s1 + 800a672: f7ff fdbf bl 800a1f4 + 800a676: f000 fc41 bl 800aefc + 800a67a: eef0 7a40 vmov.f32 s15, s0 + 800a67e: 2c01 cmp r4, #1 + 800a680: d012 beq.n 800a6a8 <__ieee754_atan2f+0xe8> + 800a682: 2c02 cmp r4, #2 + 800a684: d017 beq.n 800a6b6 <__ieee754_atan2f+0xf6> + 800a686: 2c00 cmp r4, #0 + 800a688: d0ad beq.n 800a5e6 <__ieee754_atan2f+0x26> + 800a68a: ed9f 7a19 vldr s14, [pc, #100] @ 800a6f0 <__ieee754_atan2f+0x130> + 800a68e: ee77 7a87 vadd.f32 s15, s15, s14 + 800a692: ed9f 7a18 vldr s14, [pc, #96] @ 800a6f4 <__ieee754_atan2f+0x134> + 800a696: ee77 7ac7 vsub.f32 s15, s15, s14 + 800a69a: e7a4 b.n 800a5e6 <__ieee754_atan2f+0x26> + 800a69c: eddf 7a11 vldr s15, [pc, #68] @ 800a6e4 <__ieee754_atan2f+0x124> + 800a6a0: e7ed b.n 800a67e <__ieee754_atan2f+0xbe> + 800a6a2: eddf 7a15 vldr s15, [pc, #84] @ 800a6f8 <__ieee754_atan2f+0x138> + 800a6a6: e7ea b.n 800a67e <__ieee754_atan2f+0xbe> + 800a6a8: ee17 3a90 vmov r3, s15 + 800a6ac: f103 4300 add.w r3, r3, #2147483648 @ 0x80000000 + 800a6b0: ee07 3a90 vmov s15, r3 + 800a6b4: e797 b.n 800a5e6 <__ieee754_atan2f+0x26> + 800a6b6: ed9f 7a0e vldr s14, [pc, #56] @ 800a6f0 <__ieee754_atan2f+0x130> + 800a6ba: ee77 7a87 vadd.f32 s15, s15, s14 + 800a6be: ed9f 7a0d vldr s14, [pc, #52] @ 800a6f4 <__ieee754_atan2f+0x134> + 800a6c2: ee77 7a67 vsub.f32 s15, s14, s15 + 800a6c6: e78e b.n 800a5e6 <__ieee754_atan2f+0x26> + 800a6c8: eddf 7a0a vldr s15, [pc, #40] @ 800a6f4 <__ieee754_atan2f+0x134> + 800a6cc: e78b b.n 800a5e6 <__ieee754_atan2f+0x26> + 800a6ce: eddf 7a0b vldr s15, [pc, #44] @ 800a6fc <__ieee754_atan2f+0x13c> + 800a6d2: e788 b.n 800a5e6 <__ieee754_atan2f+0x26> + 800a6d4: eddf 7a08 vldr s15, [pc, #32] @ 800a6f8 <__ieee754_atan2f+0x138> + 800a6d8: e785 b.n 800a5e6 <__ieee754_atan2f+0x26> + 800a6da: bf00 nop + 800a6dc: c0490fdb .word 0xc0490fdb + 800a6e0: bfc90fdb .word 0xbfc90fdb + 800a6e4: 3fc90fdb .word 0x3fc90fdb + 800a6e8: 0800bcc0 .word 0x0800bcc0 + 800a6ec: 0800bcb4 .word 0x0800bcb4 + 800a6f0: 33bbbd2e .word 0x33bbbd2e + 800a6f4: 40490fdb .word 0x40490fdb + 800a6f8: 00000000 .word 0x00000000 + 800a6fc: 3f490fdb .word 0x3f490fdb + +0800a700 <__ieee754_powf>: + 800a700: e92d 43f8 stmdb sp!, {r3, r4, r5, r6, r7, r8, r9, lr} + 800a704: ee10 4a90 vmov r4, s1 + 800a708: f034 4900 bics.w r9, r4, #2147483648 @ 0x80000000 + 800a70c: ed2d 8b02 vpush {d8} + 800a710: ee10 6a10 vmov r6, s0 + 800a714: eeb0 8a40 vmov.f32 s16, s0 + 800a718: eef0 8a60 vmov.f32 s17, s1 + 800a71c: d10c bne.n 800a738 <__ieee754_powf+0x38> + 800a71e: f486 0680 eor.w r6, r6, #4194304 @ 0x400000 + 800a722: 0076 lsls r6, r6, #1 + 800a724: f516 0f00 cmn.w r6, #8388608 @ 0x800000 + 800a728: f240 8274 bls.w 800ac14 <__ieee754_powf+0x514> + 800a72c: ee38 0a28 vadd.f32 s0, s16, s17 + 800a730: ecbd 8b02 vpop {d8} + 800a734: e8bd 83f8 ldmia.w sp!, {r3, r4, r5, r6, r7, r8, r9, pc} + 800a738: f026 4800 bic.w r8, r6, #2147483648 @ 0x80000000 + 800a73c: f1b8 4fff cmp.w r8, #2139095040 @ 0x7f800000 + 800a740: d802 bhi.n 800a748 <__ieee754_powf+0x48> + 800a742: f1b9 4fff cmp.w r9, #2139095040 @ 0x7f800000 + 800a746: d908 bls.n 800a75a <__ieee754_powf+0x5a> + 800a748: f1b6 5f7e cmp.w r6, #1065353216 @ 0x3f800000 + 800a74c: d1ee bne.n 800a72c <__ieee754_powf+0x2c> + 800a74e: f484 0480 eor.w r4, r4, #4194304 @ 0x400000 + 800a752: 0064 lsls r4, r4, #1 + 800a754: f514 0f00 cmn.w r4, #8388608 @ 0x800000 + 800a758: e7e6 b.n 800a728 <__ieee754_powf+0x28> + 800a75a: 2e00 cmp r6, #0 + 800a75c: da1f bge.n 800a79e <__ieee754_powf+0x9e> + 800a75e: f1b9 4f97 cmp.w r9, #1266679808 @ 0x4b800000 + 800a762: f080 8260 bcs.w 800ac26 <__ieee754_powf+0x526> + 800a766: f1b9 5f7e cmp.w r9, #1065353216 @ 0x3f800000 + 800a76a: d32f bcc.n 800a7cc <__ieee754_powf+0xcc> + 800a76c: ea4f 53e9 mov.w r3, r9, asr #23 + 800a770: f1c3 0396 rsb r3, r3, #150 @ 0x96 + 800a774: fa49 f503 asr.w r5, r9, r3 + 800a778: fa05 f303 lsl.w r3, r5, r3 + 800a77c: 454b cmp r3, r9 + 800a77e: d123 bne.n 800a7c8 <__ieee754_powf+0xc8> + 800a780: f005 0501 and.w r5, r5, #1 + 800a784: f1c5 0502 rsb r5, r5, #2 + 800a788: f1b9 5f7e cmp.w r9, #1065353216 @ 0x3f800000 + 800a78c: d11f bne.n 800a7ce <__ieee754_powf+0xce> + 800a78e: 2c00 cmp r4, #0 + 800a790: f280 8246 bge.w 800ac20 <__ieee754_powf+0x520> + 800a794: eef7 7a00 vmov.f32 s15, #112 @ 0x3f800000 1.0 + 800a798: ee87 0a88 vdiv.f32 s0, s15, s16 + 800a79c: e7c8 b.n 800a730 <__ieee754_powf+0x30> + 800a79e: f1b9 4fff cmp.w r9, #2139095040 @ 0x7f800000 + 800a7a2: d111 bne.n 800a7c8 <__ieee754_powf+0xc8> + 800a7a4: f1b8 5f7e cmp.w r8, #1065353216 @ 0x3f800000 + 800a7a8: f000 8234 beq.w 800ac14 <__ieee754_powf+0x514> + 800a7ac: d906 bls.n 800a7bc <__ieee754_powf+0xbc> + 800a7ae: ed9f 0ac5 vldr s0, [pc, #788] @ 800aac4 <__ieee754_powf+0x3c4> + 800a7b2: 2c00 cmp r4, #0 + 800a7b4: bfa8 it ge + 800a7b6: eeb0 0a68 vmovge.f32 s0, s17 + 800a7ba: e7b9 b.n 800a730 <__ieee754_powf+0x30> + 800a7bc: 2c00 cmp r4, #0 + 800a7be: f280 822c bge.w 800ac1a <__ieee754_powf+0x51a> + 800a7c2: eeb1 0a68 vneg.f32 s0, s17 + 800a7c6: e7b3 b.n 800a730 <__ieee754_powf+0x30> + 800a7c8: 2500 movs r5, #0 + 800a7ca: e7dd b.n 800a788 <__ieee754_powf+0x88> + 800a7cc: 2500 movs r5, #0 + 800a7ce: f1b4 4f80 cmp.w r4, #1073741824 @ 0x40000000 + 800a7d2: d102 bne.n 800a7da <__ieee754_powf+0xda> + 800a7d4: ee28 0a08 vmul.f32 s0, s16, s16 + 800a7d8: e7aa b.n 800a730 <__ieee754_powf+0x30> + 800a7da: f1b4 5f7c cmp.w r4, #1056964608 @ 0x3f000000 + 800a7de: f040 8227 bne.w 800ac30 <__ieee754_powf+0x530> + 800a7e2: 2e00 cmp r6, #0 + 800a7e4: f2c0 8224 blt.w 800ac30 <__ieee754_powf+0x530> + 800a7e8: eeb0 0a48 vmov.f32 s0, s16 + 800a7ec: ecbd 8b02 vpop {d8} + 800a7f0: e8bd 43f8 ldmia.w sp!, {r3, r4, r5, r6, r7, r8, r9, lr} + 800a7f4: f7ff bd5c b.w 800a2b0 <__ieee754_sqrtf> + 800a7f8: 2d01 cmp r5, #1 + 800a7fa: d199 bne.n 800a730 <__ieee754_powf+0x30> + 800a7fc: eeb1 0a40 vneg.f32 s0, s0 + 800a800: e796 b.n 800a730 <__ieee754_powf+0x30> + 800a802: 0ff0 lsrs r0, r6, #31 + 800a804: 3801 subs r0, #1 + 800a806: ea55 0300 orrs.w r3, r5, r0 + 800a80a: d104 bne.n 800a816 <__ieee754_powf+0x116> + 800a80c: ee38 8a48 vsub.f32 s16, s16, s16 + 800a810: ee88 0a08 vdiv.f32 s0, s16, s16 + 800a814: e78c b.n 800a730 <__ieee754_powf+0x30> + 800a816: f1b9 4f9a cmp.w r9, #1291845632 @ 0x4d000000 + 800a81a: d96d bls.n 800a8f8 <__ieee754_powf+0x1f8> + 800a81c: 4baa ldr r3, [pc, #680] @ (800aac8 <__ieee754_powf+0x3c8>) + 800a81e: 4598 cmp r8, r3 + 800a820: d808 bhi.n 800a834 <__ieee754_powf+0x134> + 800a822: 2c00 cmp r4, #0 + 800a824: da0b bge.n 800a83e <__ieee754_powf+0x13e> + 800a826: 2000 movs r0, #0 + 800a828: ecbd 8b02 vpop {d8} + 800a82c: e8bd 43f8 ldmia.w sp!, {r3, r4, r5, r6, r7, r8, r9, lr} + 800a830: f000 bcbe b.w 800b1b0 <__math_oflowf> + 800a834: 4ba5 ldr r3, [pc, #660] @ (800aacc <__ieee754_powf+0x3cc>) + 800a836: 4598 cmp r8, r3 + 800a838: d908 bls.n 800a84c <__ieee754_powf+0x14c> + 800a83a: 2c00 cmp r4, #0 + 800a83c: dcf3 bgt.n 800a826 <__ieee754_powf+0x126> + 800a83e: 2000 movs r0, #0 + 800a840: ecbd 8b02 vpop {d8} + 800a844: e8bd 43f8 ldmia.w sp!, {r3, r4, r5, r6, r7, r8, r9, lr} + 800a848: f000 bcac b.w 800b1a4 <__math_uflowf> + 800a84c: eef7 7a00 vmov.f32 s15, #112 @ 0x3f800000 1.0 + 800a850: ee30 0a67 vsub.f32 s0, s0, s15 + 800a854: eddf 6a9e vldr s13, [pc, #632] @ 800aad0 <__ieee754_powf+0x3d0> + 800a858: eef5 7a00 vmov.f32 s15, #80 @ 0x3e800000 0.250 + 800a85c: eee0 6a67 vfms.f32 s13, s0, s15 + 800a860: eef6 7a00 vmov.f32 s15, #96 @ 0x3f000000 0.5 + 800a864: eee6 7ac0 vfms.f32 s15, s13, s0 + 800a868: ee20 7a00 vmul.f32 s14, s0, s0 + 800a86c: eddf 6a99 vldr s13, [pc, #612] @ 800aad4 <__ieee754_powf+0x3d4> + 800a870: ee27 7a27 vmul.f32 s14, s14, s15 + 800a874: eddf 7a98 vldr s15, [pc, #608] @ 800aad8 <__ieee754_powf+0x3d8> + 800a878: ee67 7ac7 vnmul.f32 s15, s15, s14 + 800a87c: ed9f 7a97 vldr s14, [pc, #604] @ 800aadc <__ieee754_powf+0x3dc> + 800a880: eee0 7a07 vfma.f32 s15, s0, s14 + 800a884: eeb0 7a67 vmov.f32 s14, s15 + 800a888: eea0 7a26 vfma.f32 s14, s0, s13 + 800a88c: ee17 3a10 vmov r3, s14 + 800a890: f36f 030b bfc r3, #0, #12 + 800a894: ee07 3a10 vmov s14, r3 + 800a898: eeb0 6a47 vmov.f32 s12, s14 + 800a89c: eea0 6a66 vfms.f32 s12, s0, s13 + 800a8a0: ee77 7ac6 vsub.f32 s15, s15, s12 + 800a8a4: 3d01 subs r5, #1 + 800a8a6: 4305 orrs r5, r0 + 800a8a8: eef7 6a00 vmov.f32 s13, #112 @ 0x3f800000 1.0 + 800a8ac: eebf 8a00 vmov.f32 s16, #240 @ 0xbf800000 -1.0 + 800a8b0: f36f 040b bfc r4, #0, #12 + 800a8b4: bf18 it ne + 800a8b6: eeb0 8a66 vmovne.f32 s16, s13 + 800a8ba: ee06 4a90 vmov s13, r4 + 800a8be: ee67 0aa8 vmul.f32 s1, s15, s17 + 800a8c2: ee38 6ae6 vsub.f32 s12, s17, s13 + 800a8c6: ee67 7a26 vmul.f32 s15, s14, s13 + 800a8ca: eee6 0a07 vfma.f32 s1, s12, s14 + 800a8ce: ee30 7aa7 vadd.f32 s14, s1, s15 + 800a8d2: ee17 1a10 vmov r1, s14 + 800a8d6: 2900 cmp r1, #0 + 800a8d8: f021 4300 bic.w r3, r1, #2147483648 @ 0x80000000 + 800a8dc: f340 80dd ble.w 800aa9a <__ieee754_powf+0x39a> + 800a8e0: f1b3 4f86 cmp.w r3, #1124073472 @ 0x43000000 + 800a8e4: f240 80ca bls.w 800aa7c <__ieee754_powf+0x37c> + 800a8e8: eeb5 8ac0 vcmpe.f32 s16, #0.0 + 800a8ec: eef1 fa10 vmrs APSR_nzcv, fpscr + 800a8f0: bf4c ite mi + 800a8f2: 2001 movmi r0, #1 + 800a8f4: 2000 movpl r0, #0 + 800a8f6: e797 b.n 800a828 <__ieee754_powf+0x128> + 800a8f8: f016 4fff tst.w r6, #2139095040 @ 0x7f800000 + 800a8fc: bf01 itttt eq + 800a8fe: eddf 7a78 vldreq s15, [pc, #480] @ 800aae0 <__ieee754_powf+0x3e0> + 800a902: ee60 7a27 vmuleq.f32 s15, s0, s15 + 800a906: f06f 0317 mvneq.w r3, #23 + 800a90a: ee17 7a90 vmoveq r7, s15 + 800a90e: ea4f 52e7 mov.w r2, r7, asr #23 + 800a912: bf18 it ne + 800a914: 2300 movne r3, #0 + 800a916: 3a7f subs r2, #127 @ 0x7f + 800a918: 441a add r2, r3 + 800a91a: 4b72 ldr r3, [pc, #456] @ (800aae4 <__ieee754_powf+0x3e4>) + 800a91c: f3c7 0716 ubfx r7, r7, #0, #23 + 800a920: 429f cmp r7, r3 + 800a922: f047 517e orr.w r1, r7, #1065353216 @ 0x3f800000 + 800a926: dd06 ble.n 800a936 <__ieee754_powf+0x236> + 800a928: 4b6f ldr r3, [pc, #444] @ (800aae8 <__ieee754_powf+0x3e8>) + 800a92a: 429f cmp r7, r3 + 800a92c: f340 80a4 ble.w 800aa78 <__ieee754_powf+0x378> + 800a930: 3201 adds r2, #1 + 800a932: f5a1 0100 sub.w r1, r1, #8388608 @ 0x800000 + 800a936: 2600 movs r6, #0 + 800a938: 4b6c ldr r3, [pc, #432] @ (800aaec <__ieee754_powf+0x3ec>) + 800a93a: eb03 0386 add.w r3, r3, r6, lsl #2 + 800a93e: ee07 1a10 vmov s14, r1 + 800a942: edd3 5a00 vldr s11, [r3] + 800a946: 4b6a ldr r3, [pc, #424] @ (800aaf0 <__ieee754_powf+0x3f0>) + 800a948: ee75 7a87 vadd.f32 s15, s11, s14 + 800a94c: eef7 6a00 vmov.f32 s13, #112 @ 0x3f800000 1.0 + 800a950: eec6 4aa7 vdiv.f32 s9, s13, s15 + 800a954: 1049 asrs r1, r1, #1 + 800a956: f041 5100 orr.w r1, r1, #536870912 @ 0x20000000 + 800a95a: f501 2180 add.w r1, r1, #262144 @ 0x40000 + 800a95e: eb01 5146 add.w r1, r1, r6, lsl #21 + 800a962: ee37 6a65 vsub.f32 s12, s14, s11 + 800a966: ee07 1a90 vmov s15, r1 + 800a96a: ee26 5a24 vmul.f32 s10, s12, s9 + 800a96e: ee77 5ae5 vsub.f32 s11, s15, s11 + 800a972: ee15 7a10 vmov r7, s10 + 800a976: 401f ands r7, r3 + 800a978: ee06 7a90 vmov s13, r7 + 800a97c: eea6 6ae7 vfms.f32 s12, s13, s15 + 800a980: ee37 7a65 vsub.f32 s14, s14, s11 + 800a984: ee65 7a05 vmul.f32 s15, s10, s10 + 800a988: eea6 6ac7 vfms.f32 s12, s13, s14 + 800a98c: eddf 5a59 vldr s11, [pc, #356] @ 800aaf4 <__ieee754_powf+0x3f4> + 800a990: ed9f 7a59 vldr s14, [pc, #356] @ 800aaf8 <__ieee754_powf+0x3f8> + 800a994: eee7 5a87 vfma.f32 s11, s15, s14 + 800a998: ed9f 7a58 vldr s14, [pc, #352] @ 800aafc <__ieee754_powf+0x3fc> + 800a99c: eea5 7aa7 vfma.f32 s14, s11, s15 + 800a9a0: eddf 5a4b vldr s11, [pc, #300] @ 800aad0 <__ieee754_powf+0x3d0> + 800a9a4: eee7 5a27 vfma.f32 s11, s14, s15 + 800a9a8: ed9f 7a55 vldr s14, [pc, #340] @ 800ab00 <__ieee754_powf+0x400> + 800a9ac: eea5 7aa7 vfma.f32 s14, s11, s15 + 800a9b0: eddf 5a54 vldr s11, [pc, #336] @ 800ab04 <__ieee754_powf+0x404> + 800a9b4: ee26 6a24 vmul.f32 s12, s12, s9 + 800a9b8: eee7 5a27 vfma.f32 s11, s14, s15 + 800a9bc: ee35 7a26 vadd.f32 s14, s10, s13 + 800a9c0: ee67 4aa7 vmul.f32 s9, s15, s15 + 800a9c4: ee27 7a06 vmul.f32 s14, s14, s12 + 800a9c8: eef0 7a08 vmov.f32 s15, #8 @ 0x40400000 3.0 + 800a9cc: eea4 7aa5 vfma.f32 s14, s9, s11 + 800a9d0: eef0 5a67 vmov.f32 s11, s15 + 800a9d4: eee6 5aa6 vfma.f32 s11, s13, s13 + 800a9d8: ee75 5a87 vadd.f32 s11, s11, s14 + 800a9dc: ee15 1a90 vmov r1, s11 + 800a9e0: 4019 ands r1, r3 + 800a9e2: ee05 1a90 vmov s11, r1 + 800a9e6: ee75 7ae7 vsub.f32 s15, s11, s15 + 800a9ea: eee6 7ae6 vfms.f32 s15, s13, s13 + 800a9ee: ee77 7a67 vsub.f32 s15, s14, s15 + 800a9f2: ee67 7a85 vmul.f32 s15, s15, s10 + 800a9f6: eee6 7a25 vfma.f32 s15, s12, s11 + 800a9fa: eeb0 6a67 vmov.f32 s12, s15 + 800a9fe: eea6 6aa5 vfma.f32 s12, s13, s11 + 800aa02: ee16 1a10 vmov r1, s12 + 800aa06: 4019 ands r1, r3 + 800aa08: ee06 1a10 vmov s12, r1 + 800aa0c: eeb0 7a46 vmov.f32 s14, s12 + 800aa10: eea6 7ae5 vfms.f32 s14, s13, s11 + 800aa14: 493c ldr r1, [pc, #240] @ (800ab08 <__ieee754_powf+0x408>) + 800aa16: eb01 0186 add.w r1, r1, r6, lsl #2 + 800aa1a: ee77 7ac7 vsub.f32 s15, s15, s14 + 800aa1e: ed9f 7a3b vldr s14, [pc, #236] @ 800ab0c <__ieee754_powf+0x40c> + 800aa22: eddf 5a3b vldr s11, [pc, #236] @ 800ab10 <__ieee754_powf+0x410> + 800aa26: ee67 7a87 vmul.f32 s15, s15, s14 + 800aa2a: ed9f 7a3a vldr s14, [pc, #232] @ 800ab14 <__ieee754_powf+0x414> + 800aa2e: eee6 7a07 vfma.f32 s15, s12, s14 + 800aa32: ed91 7a00 vldr s14, [r1] + 800aa36: ee77 7a87 vadd.f32 s15, s15, s14 + 800aa3a: ee07 2a10 vmov s14, r2 + 800aa3e: 4a36 ldr r2, [pc, #216] @ (800ab18 <__ieee754_powf+0x418>) + 800aa40: eef8 6ac7 vcvt.f32.s32 s13, s14 + 800aa44: eeb0 7a67 vmov.f32 s14, s15 + 800aa48: eea6 7a25 vfma.f32 s14, s12, s11 + 800aa4c: eb02 0286 add.w r2, r2, r6, lsl #2 + 800aa50: ed92 5a00 vldr s10, [r2] + 800aa54: ee37 7a05 vadd.f32 s14, s14, s10 + 800aa58: ee37 7a26 vadd.f32 s14, s14, s13 + 800aa5c: ee17 2a10 vmov r2, s14 + 800aa60: 401a ands r2, r3 + 800aa62: ee07 2a10 vmov s14, r2 + 800aa66: ee77 6a66 vsub.f32 s13, s14, s13 + 800aa6a: ee76 6ac5 vsub.f32 s13, s13, s10 + 800aa6e: eee6 6a65 vfms.f32 s13, s12, s11 + 800aa72: ee77 7ae6 vsub.f32 s15, s15, s13 + 800aa76: e715 b.n 800a8a4 <__ieee754_powf+0x1a4> + 800aa78: 2601 movs r6, #1 + 800aa7a: e75d b.n 800a938 <__ieee754_powf+0x238> + 800aa7c: d152 bne.n 800ab24 <__ieee754_powf+0x424> + 800aa7e: eddf 6a27 vldr s13, [pc, #156] @ 800ab1c <__ieee754_powf+0x41c> + 800aa82: ee37 7a67 vsub.f32 s14, s14, s15 + 800aa86: ee70 6aa6 vadd.f32 s13, s1, s13 + 800aa8a: eef4 6ac7 vcmpe.f32 s13, s14 + 800aa8e: eef1 fa10 vmrs APSR_nzcv, fpscr + 800aa92: f73f af29 bgt.w 800a8e8 <__ieee754_powf+0x1e8> + 800aa96: 2386 movs r3, #134 @ 0x86 + 800aa98: e048 b.n 800ab2c <__ieee754_powf+0x42c> + 800aa9a: 4a21 ldr r2, [pc, #132] @ (800ab20 <__ieee754_powf+0x420>) + 800aa9c: 4293 cmp r3, r2 + 800aa9e: d907 bls.n 800aab0 <__ieee754_powf+0x3b0> + 800aaa0: eeb5 8ac0 vcmpe.f32 s16, #0.0 + 800aaa4: eef1 fa10 vmrs APSR_nzcv, fpscr + 800aaa8: bf4c ite mi + 800aaaa: 2001 movmi r0, #1 + 800aaac: 2000 movpl r0, #0 + 800aaae: e6c7 b.n 800a840 <__ieee754_powf+0x140> + 800aab0: d138 bne.n 800ab24 <__ieee754_powf+0x424> + 800aab2: ee37 7a67 vsub.f32 s14, s14, s15 + 800aab6: eeb4 7ae0 vcmpe.f32 s14, s1 + 800aaba: eef1 fa10 vmrs APSR_nzcv, fpscr + 800aabe: dbea blt.n 800aa96 <__ieee754_powf+0x396> + 800aac0: e7ee b.n 800aaa0 <__ieee754_powf+0x3a0> + 800aac2: bf00 nop + 800aac4: 00000000 .word 0x00000000 + 800aac8: 3f7ffff3 .word 0x3f7ffff3 + 800aacc: 3f800007 .word 0x3f800007 + 800aad0: 3eaaaaab .word 0x3eaaaaab + 800aad4: 3fb8aa00 .word 0x3fb8aa00 + 800aad8: 3fb8aa3b .word 0x3fb8aa3b + 800aadc: 36eca570 .word 0x36eca570 + 800aae0: 4b800000 .word 0x4b800000 + 800aae4: 001cc471 .word 0x001cc471 + 800aae8: 005db3d6 .word 0x005db3d6 + 800aaec: 0800bcdc .word 0x0800bcdc + 800aaf0: fffff000 .word 0xfffff000 + 800aaf4: 3e6c3255 .word 0x3e6c3255 + 800aaf8: 3e53f142 .word 0x3e53f142 + 800aafc: 3e8ba305 .word 0x3e8ba305 + 800ab00: 3edb6db7 .word 0x3edb6db7 + 800ab04: 3f19999a .word 0x3f19999a + 800ab08: 0800bccc .word 0x0800bccc + 800ab0c: 3f76384f .word 0x3f76384f + 800ab10: 3f763800 .word 0x3f763800 + 800ab14: 369dc3a0 .word 0x369dc3a0 + 800ab18: 0800bcd4 .word 0x0800bcd4 + 800ab1c: 3338aa3c .word 0x3338aa3c + 800ab20: 43160000 .word 0x43160000 + 800ab24: f1b3 5f7c cmp.w r3, #1056964608 @ 0x3f000000 + 800ab28: d96f bls.n 800ac0a <__ieee754_powf+0x50a> + 800ab2a: 15db asrs r3, r3, #23 + 800ab2c: 3b7e subs r3, #126 @ 0x7e + 800ab2e: f44f 0000 mov.w r0, #8388608 @ 0x800000 + 800ab32: 4118 asrs r0, r3 + 800ab34: 4408 add r0, r1 + 800ab36: f3c0 53c7 ubfx r3, r0, #23, #8 + 800ab3a: 4a4e ldr r2, [pc, #312] @ (800ac74 <__ieee754_powf+0x574>) + 800ab3c: 3b7f subs r3, #127 @ 0x7f + 800ab3e: 411a asrs r2, r3 + 800ab40: 4002 ands r2, r0 + 800ab42: ee07 2a10 vmov s14, r2 + 800ab46: f3c0 0016 ubfx r0, r0, #0, #23 + 800ab4a: f440 0000 orr.w r0, r0, #8388608 @ 0x800000 + 800ab4e: f1c3 0317 rsb r3, r3, #23 + 800ab52: 4118 asrs r0, r3 + 800ab54: 2900 cmp r1, #0 + 800ab56: ee77 7ac7 vsub.f32 s15, s15, s14 + 800ab5a: bfb8 it lt + 800ab5c: 4240 neglt r0, r0 + 800ab5e: ee77 6aa0 vadd.f32 s13, s15, s1 + 800ab62: ed9f 7a45 vldr s14, [pc, #276] @ 800ac78 <__ieee754_powf+0x578> + 800ab66: ed9f 6a45 vldr s12, [pc, #276] @ 800ac7c <__ieee754_powf+0x57c> + 800ab6a: ee16 3a90 vmov r3, s13 + 800ab6e: f36f 030b bfc r3, #0, #12 + 800ab72: ee06 3a90 vmov s13, r3 + 800ab76: ee76 7ae7 vsub.f32 s15, s13, s15 + 800ab7a: eeb7 0a00 vmov.f32 s0, #112 @ 0x3f800000 1.0 + 800ab7e: ee70 0ae7 vsub.f32 s1, s1, s15 + 800ab82: eddf 7a3f vldr s15, [pc, #252] @ 800ac80 <__ieee754_powf+0x580> + 800ab86: ee66 7aa7 vmul.f32 s15, s13, s15 + 800ab8a: eee0 7a87 vfma.f32 s15, s1, s14 + 800ab8e: eeb0 7a67 vmov.f32 s14, s15 + 800ab92: eea6 7a86 vfma.f32 s14, s13, s12 + 800ab96: eef0 5a47 vmov.f32 s11, s14 + 800ab9a: eee6 5ac6 vfms.f32 s11, s13, s12 + 800ab9e: ee67 6a07 vmul.f32 s13, s14, s14 + 800aba2: ee77 7ae5 vsub.f32 s15, s15, s11 + 800aba6: ed9f 6a37 vldr s12, [pc, #220] @ 800ac84 <__ieee754_powf+0x584> + 800abaa: eddf 5a37 vldr s11, [pc, #220] @ 800ac88 <__ieee754_powf+0x588> + 800abae: eea6 6aa5 vfma.f32 s12, s13, s11 + 800abb2: eddf 5a36 vldr s11, [pc, #216] @ 800ac8c <__ieee754_powf+0x58c> + 800abb6: eee6 5a26 vfma.f32 s11, s12, s13 + 800abba: ed9f 6a35 vldr s12, [pc, #212] @ 800ac90 <__ieee754_powf+0x590> + 800abbe: eea5 6aa6 vfma.f32 s12, s11, s13 + 800abc2: eddf 5a34 vldr s11, [pc, #208] @ 800ac94 <__ieee754_powf+0x594> + 800abc6: eee6 5a26 vfma.f32 s11, s12, s13 + 800abca: eeb0 6a47 vmov.f32 s12, s14 + 800abce: eea5 6ae6 vfms.f32 s12, s11, s13 + 800abd2: eef0 6a00 vmov.f32 s13, #0 @ 0x40000000 2.0 + 800abd6: ee67 5a06 vmul.f32 s11, s14, s12 + 800abda: ee36 6a66 vsub.f32 s12, s12, s13 + 800abde: eee7 7a27 vfma.f32 s15, s14, s15 + 800abe2: eec5 6a86 vdiv.f32 s13, s11, s12 + 800abe6: ee76 7ae7 vsub.f32 s15, s13, s15 + 800abea: ee77 7ac7 vsub.f32 s15, s15, s14 + 800abee: ee30 0a67 vsub.f32 s0, s0, s15 + 800abf2: ee10 3a10 vmov r3, s0 + 800abf6: eb03 53c0 add.w r3, r3, r0, lsl #23 + 800abfa: f5b3 0f00 cmp.w r3, #8388608 @ 0x800000 + 800abfe: da06 bge.n 800ac0e <__ieee754_powf+0x50e> + 800ac00: f000 fa50 bl 800b0a4 + 800ac04: ee20 0a08 vmul.f32 s0, s0, s16 + 800ac08: e592 b.n 800a730 <__ieee754_powf+0x30> + 800ac0a: 2000 movs r0, #0 + 800ac0c: e7a7 b.n 800ab5e <__ieee754_powf+0x45e> + 800ac0e: ee00 3a10 vmov s0, r3 + 800ac12: e7f7 b.n 800ac04 <__ieee754_powf+0x504> + 800ac14: eeb7 0a00 vmov.f32 s0, #112 @ 0x3f800000 1.0 + 800ac18: e58a b.n 800a730 <__ieee754_powf+0x30> + 800ac1a: ed9f 0a1f vldr s0, [pc, #124] @ 800ac98 <__ieee754_powf+0x598> + 800ac1e: e587 b.n 800a730 <__ieee754_powf+0x30> + 800ac20: eeb0 0a48 vmov.f32 s0, s16 + 800ac24: e584 b.n 800a730 <__ieee754_powf+0x30> + 800ac26: f1b9 4fff cmp.w r9, #2139095040 @ 0x7f800000 + 800ac2a: f43f adbb beq.w 800a7a4 <__ieee754_powf+0xa4> + 800ac2e: 2502 movs r5, #2 + 800ac30: eeb0 0a48 vmov.f32 s0, s16 + 800ac34: f7ff fade bl 800a1f4 + 800ac38: f026 4340 bic.w r3, r6, #3221225472 @ 0xc0000000 + 800ac3c: f1b3 5f7e cmp.w r3, #1065353216 @ 0x3f800000 + 800ac40: 4647 mov r7, r8 + 800ac42: d003 beq.n 800ac4c <__ieee754_powf+0x54c> + 800ac44: f1b8 0f00 cmp.w r8, #0 + 800ac48: f47f addb bne.w 800a802 <__ieee754_powf+0x102> + 800ac4c: 2c00 cmp r4, #0 + 800ac4e: bfbc itt lt + 800ac50: eef7 7a00 vmovlt.f32 s15, #112 @ 0x3f800000 1.0 + 800ac54: ee87 0a80 vdivlt.f32 s0, s15, s0 + 800ac58: 2e00 cmp r6, #0 + 800ac5a: f6bf ad69 bge.w 800a730 <__ieee754_powf+0x30> + 800ac5e: f1a8 587e sub.w r8, r8, #1065353216 @ 0x3f800000 + 800ac62: ea58 0805 orrs.w r8, r8, r5 + 800ac66: f47f adc7 bne.w 800a7f8 <__ieee754_powf+0xf8> + 800ac6a: ee70 7a40 vsub.f32 s15, s0, s0 + 800ac6e: ee87 0aa7 vdiv.f32 s0, s15, s15 + 800ac72: e55d b.n 800a730 <__ieee754_powf+0x30> + 800ac74: ff800000 .word 0xff800000 + 800ac78: 3f317218 .word 0x3f317218 + 800ac7c: 3f317200 .word 0x3f317200 + 800ac80: 35bfbe8c .word 0x35bfbe8c + 800ac84: b5ddea0e .word 0xb5ddea0e + 800ac88: 3331bb4c .word 0x3331bb4c + 800ac8c: 388ab355 .word 0x388ab355 + 800ac90: bb360b61 .word 0xbb360b61 + 800ac94: 3e2aaaab .word 0x3e2aaaab + 800ac98: 00000000 .word 0x00000000 + +0800ac9c <__ieee754_rem_pio2f>: + 800ac9c: b5f0 push {r4, r5, r6, r7, lr} + 800ac9e: ee10 6a10 vmov r6, s0 + 800aca2: 4b88 ldr r3, [pc, #544] @ (800aec4 <__ieee754_rem_pio2f+0x228>) + 800aca4: f026 4500 bic.w r5, r6, #2147483648 @ 0x80000000 + 800aca8: 429d cmp r5, r3 + 800acaa: b087 sub sp, #28 + 800acac: 4604 mov r4, r0 + 800acae: d805 bhi.n 800acbc <__ieee754_rem_pio2f+0x20> + 800acb0: 2300 movs r3, #0 + 800acb2: ed80 0a00 vstr s0, [r0] + 800acb6: 6043 str r3, [r0, #4] + 800acb8: 2000 movs r0, #0 + 800acba: e022 b.n 800ad02 <__ieee754_rem_pio2f+0x66> + 800acbc: 4b82 ldr r3, [pc, #520] @ (800aec8 <__ieee754_rem_pio2f+0x22c>) + 800acbe: 429d cmp r5, r3 + 800acc0: d83a bhi.n 800ad38 <__ieee754_rem_pio2f+0x9c> + 800acc2: f026 4300 bic.w r3, r6, #2147483648 @ 0x80000000 + 800acc6: 2e00 cmp r6, #0 + 800acc8: ed9f 7a80 vldr s14, [pc, #512] @ 800aecc <__ieee754_rem_pio2f+0x230> + 800accc: 4a80 ldr r2, [pc, #512] @ (800aed0 <__ieee754_rem_pio2f+0x234>) + 800acce: f023 030f bic.w r3, r3, #15 + 800acd2: dd18 ble.n 800ad06 <__ieee754_rem_pio2f+0x6a> + 800acd4: 4293 cmp r3, r2 + 800acd6: ee70 7a47 vsub.f32 s15, s0, s14 + 800acda: bf09 itett eq + 800acdc: ed9f 7a7d vldreq s14, [pc, #500] @ 800aed4 <__ieee754_rem_pio2f+0x238> + 800ace0: eddf 6a7d vldrne s13, [pc, #500] @ 800aed8 <__ieee754_rem_pio2f+0x23c> + 800ace4: eddf 6a7d vldreq s13, [pc, #500] @ 800aedc <__ieee754_rem_pio2f+0x240> + 800ace8: ee77 7ac7 vsubeq.f32 s15, s15, s14 + 800acec: ee37 7ae6 vsub.f32 s14, s15, s13 + 800acf0: ee77 7ac7 vsub.f32 s15, s15, s14 + 800acf4: ed80 7a00 vstr s14, [r0] + 800acf8: ee77 7ae6 vsub.f32 s15, s15, s13 + 800acfc: edc0 7a01 vstr s15, [r0, #4] + 800ad00: 2001 movs r0, #1 + 800ad02: b007 add sp, #28 + 800ad04: bdf0 pop {r4, r5, r6, r7, pc} + 800ad06: 4293 cmp r3, r2 + 800ad08: ee70 7a07 vadd.f32 s15, s0, s14 + 800ad0c: bf09 itett eq + 800ad0e: ed9f 7a71 vldreq s14, [pc, #452] @ 800aed4 <__ieee754_rem_pio2f+0x238> + 800ad12: eddf 6a71 vldrne s13, [pc, #452] @ 800aed8 <__ieee754_rem_pio2f+0x23c> + 800ad16: eddf 6a71 vldreq s13, [pc, #452] @ 800aedc <__ieee754_rem_pio2f+0x240> + 800ad1a: ee77 7a87 vaddeq.f32 s15, s15, s14 + 800ad1e: ee37 7aa6 vadd.f32 s14, s15, s13 + 800ad22: ee77 7ac7 vsub.f32 s15, s15, s14 + 800ad26: ed80 7a00 vstr s14, [r0] + 800ad2a: ee77 7aa6 vadd.f32 s15, s15, s13 + 800ad2e: edc0 7a01 vstr s15, [r0, #4] + 800ad32: f04f 30ff mov.w r0, #4294967295 + 800ad36: e7e4 b.n 800ad02 <__ieee754_rem_pio2f+0x66> + 800ad38: 4b69 ldr r3, [pc, #420] @ (800aee0 <__ieee754_rem_pio2f+0x244>) + 800ad3a: 429d cmp r5, r3 + 800ad3c: d873 bhi.n 800ae26 <__ieee754_rem_pio2f+0x18a> + 800ad3e: f7ff fa59 bl 800a1f4 + 800ad42: ed9f 7a68 vldr s14, [pc, #416] @ 800aee4 <__ieee754_rem_pio2f+0x248> + 800ad46: eef6 7a00 vmov.f32 s15, #96 @ 0x3f000000 0.5 + 800ad4a: eee0 7a07 vfma.f32 s15, s0, s14 + 800ad4e: eefd 7ae7 vcvt.s32.f32 s15, s15 + 800ad52: eeb8 7ae7 vcvt.f32.s32 s14, s15 + 800ad56: ee17 0a90 vmov r0, s15 + 800ad5a: eddf 7a5c vldr s15, [pc, #368] @ 800aecc <__ieee754_rem_pio2f+0x230> + 800ad5e: eea7 0a67 vfms.f32 s0, s14, s15 + 800ad62: 281f cmp r0, #31 + 800ad64: eddf 7a5c vldr s15, [pc, #368] @ 800aed8 <__ieee754_rem_pio2f+0x23c> + 800ad68: ee67 7a27 vmul.f32 s15, s14, s15 + 800ad6c: eeb1 6a47 vneg.f32 s12, s14 + 800ad70: ee70 6a67 vsub.f32 s13, s0, s15 + 800ad74: ee16 1a90 vmov r1, s13 + 800ad78: dc09 bgt.n 800ad8e <__ieee754_rem_pio2f+0xf2> + 800ad7a: 4a5b ldr r2, [pc, #364] @ (800aee8 <__ieee754_rem_pio2f+0x24c>) + 800ad7c: 1e47 subs r7, r0, #1 + 800ad7e: f026 4300 bic.w r3, r6, #2147483648 @ 0x80000000 + 800ad82: f852 2027 ldr.w r2, [r2, r7, lsl #2] + 800ad86: f023 03ff bic.w r3, r3, #255 @ 0xff + 800ad8a: 4293 cmp r3, r2 + 800ad8c: d107 bne.n 800ad9e <__ieee754_rem_pio2f+0x102> + 800ad8e: f3c1 52c7 ubfx r2, r1, #23, #8 + 800ad92: ebc2 52d5 rsb r2, r2, r5, lsr #23 + 800ad96: 2a08 cmp r2, #8 + 800ad98: ea4f 53e5 mov.w r3, r5, asr #23 + 800ad9c: dc14 bgt.n 800adc8 <__ieee754_rem_pio2f+0x12c> + 800ad9e: 6021 str r1, [r4, #0] + 800ada0: ed94 7a00 vldr s14, [r4] + 800ada4: ee30 0a47 vsub.f32 s0, s0, s14 + 800ada8: 2e00 cmp r6, #0 + 800adaa: ee30 0a67 vsub.f32 s0, s0, s15 + 800adae: ed84 0a01 vstr s0, [r4, #4] + 800adb2: daa6 bge.n 800ad02 <__ieee754_rem_pio2f+0x66> + 800adb4: eeb1 7a47 vneg.f32 s14, s14 + 800adb8: eeb1 0a40 vneg.f32 s0, s0 + 800adbc: ed84 7a00 vstr s14, [r4] + 800adc0: ed84 0a01 vstr s0, [r4, #4] + 800adc4: 4240 negs r0, r0 + 800adc6: e79c b.n 800ad02 <__ieee754_rem_pio2f+0x66> + 800adc8: eddf 5a42 vldr s11, [pc, #264] @ 800aed4 <__ieee754_rem_pio2f+0x238> + 800adcc: eef0 6a40 vmov.f32 s13, s0 + 800add0: eee6 6a25 vfma.f32 s13, s12, s11 + 800add4: ee70 7a66 vsub.f32 s15, s0, s13 + 800add8: eee6 7a25 vfma.f32 s15, s12, s11 + 800addc: eddf 5a3f vldr s11, [pc, #252] @ 800aedc <__ieee754_rem_pio2f+0x240> + 800ade0: eed7 7a25 vfnms.f32 s15, s14, s11 + 800ade4: ee76 5ae7 vsub.f32 s11, s13, s15 + 800ade8: ee15 2a90 vmov r2, s11 + 800adec: f3c2 51c7 ubfx r1, r2, #23, #8 + 800adf0: 1a5b subs r3, r3, r1 + 800adf2: 2b19 cmp r3, #25 + 800adf4: dc04 bgt.n 800ae00 <__ieee754_rem_pio2f+0x164> + 800adf6: edc4 5a00 vstr s11, [r4] + 800adfa: eeb0 0a66 vmov.f32 s0, s13 + 800adfe: e7cf b.n 800ada0 <__ieee754_rem_pio2f+0x104> + 800ae00: eddf 5a3a vldr s11, [pc, #232] @ 800aeec <__ieee754_rem_pio2f+0x250> + 800ae04: eeb0 0a66 vmov.f32 s0, s13 + 800ae08: eea6 0a25 vfma.f32 s0, s12, s11 + 800ae0c: ee76 7ac0 vsub.f32 s15, s13, s0 + 800ae10: eddf 6a37 vldr s13, [pc, #220] @ 800aef0 <__ieee754_rem_pio2f+0x254> + 800ae14: eee6 7a25 vfma.f32 s15, s12, s11 + 800ae18: eed7 7a26 vfnms.f32 s15, s14, s13 + 800ae1c: ee30 7a67 vsub.f32 s14, s0, s15 + 800ae20: ed84 7a00 vstr s14, [r4] + 800ae24: e7bc b.n 800ada0 <__ieee754_rem_pio2f+0x104> + 800ae26: f1b5 4fff cmp.w r5, #2139095040 @ 0x7f800000 + 800ae2a: d306 bcc.n 800ae3a <__ieee754_rem_pio2f+0x19e> + 800ae2c: ee70 7a40 vsub.f32 s15, s0, s0 + 800ae30: edc0 7a01 vstr s15, [r0, #4] + 800ae34: edc0 7a00 vstr s15, [r0] + 800ae38: e73e b.n 800acb8 <__ieee754_rem_pio2f+0x1c> + 800ae3a: 15ea asrs r2, r5, #23 + 800ae3c: 3a86 subs r2, #134 @ 0x86 + 800ae3e: eba5 53c2 sub.w r3, r5, r2, lsl #23 + 800ae42: ee07 3a90 vmov s15, r3 + 800ae46: eebd 7ae7 vcvt.s32.f32 s14, s15 + 800ae4a: eddf 6a2a vldr s13, [pc, #168] @ 800aef4 <__ieee754_rem_pio2f+0x258> + 800ae4e: eeb8 7ac7 vcvt.f32.s32 s14, s14 + 800ae52: ee77 7ac7 vsub.f32 s15, s15, s14 + 800ae56: ed8d 7a03 vstr s14, [sp, #12] + 800ae5a: ee67 7aa6 vmul.f32 s15, s15, s13 + 800ae5e: eebd 7ae7 vcvt.s32.f32 s14, s15 + 800ae62: eeb8 7ac7 vcvt.f32.s32 s14, s14 + 800ae66: ee77 7ac7 vsub.f32 s15, s15, s14 + 800ae6a: ed8d 7a04 vstr s14, [sp, #16] + 800ae6e: ee67 7aa6 vmul.f32 s15, s15, s13 + 800ae72: eef5 7a40 vcmp.f32 s15, #0.0 + 800ae76: eef1 fa10 vmrs APSR_nzcv, fpscr + 800ae7a: edcd 7a05 vstr s15, [sp, #20] + 800ae7e: d11e bne.n 800aebe <__ieee754_rem_pio2f+0x222> + 800ae80: eeb5 7a40 vcmp.f32 s14, #0.0 + 800ae84: eef1 fa10 vmrs APSR_nzcv, fpscr + 800ae88: bf0c ite eq + 800ae8a: 2301 moveq r3, #1 + 800ae8c: 2302 movne r3, #2 + 800ae8e: 491a ldr r1, [pc, #104] @ (800aef8 <__ieee754_rem_pio2f+0x25c>) + 800ae90: 9101 str r1, [sp, #4] + 800ae92: 2102 movs r1, #2 + 800ae94: 9100 str r1, [sp, #0] + 800ae96: a803 add r0, sp, #12 + 800ae98: 4621 mov r1, r4 + 800ae9a: f000 f98f bl 800b1bc <__kernel_rem_pio2f> + 800ae9e: 2e00 cmp r6, #0 + 800aea0: f6bf af2f bge.w 800ad02 <__ieee754_rem_pio2f+0x66> + 800aea4: edd4 7a00 vldr s15, [r4] + 800aea8: eef1 7a67 vneg.f32 s15, s15 + 800aeac: edc4 7a00 vstr s15, [r4] + 800aeb0: edd4 7a01 vldr s15, [r4, #4] + 800aeb4: eef1 7a67 vneg.f32 s15, s15 + 800aeb8: edc4 7a01 vstr s15, [r4, #4] + 800aebc: e782 b.n 800adc4 <__ieee754_rem_pio2f+0x128> + 800aebe: 2303 movs r3, #3 + 800aec0: e7e5 b.n 800ae8e <__ieee754_rem_pio2f+0x1f2> + 800aec2: bf00 nop + 800aec4: 3f490fd8 .word 0x3f490fd8 + 800aec8: 4016cbe3 .word 0x4016cbe3 + 800aecc: 3fc90f80 .word 0x3fc90f80 + 800aed0: 3fc90fd0 .word 0x3fc90fd0 + 800aed4: 37354400 .word 0x37354400 + 800aed8: 37354443 .word 0x37354443 + 800aedc: 2e85a308 .word 0x2e85a308 + 800aee0: 43490f80 .word 0x43490f80 + 800aee4: 3f22f984 .word 0x3f22f984 + 800aee8: 0800bce4 .word 0x0800bce4 + 800aeec: 2e85a300 .word 0x2e85a300 + 800aef0: 248d3132 .word 0x248d3132 + 800aef4: 43800000 .word 0x43800000 + 800aef8: 0800bd64 .word 0x0800bd64 + +0800aefc : + 800aefc: b538 push {r3, r4, r5, lr} + 800aefe: ee10 5a10 vmov r5, s0 + 800af02: f025 4400 bic.w r4, r5, #2147483648 @ 0x80000000 + 800af06: f1b4 4fa1 cmp.w r4, #1350565888 @ 0x50800000 + 800af0a: eef0 7a40 vmov.f32 s15, s0 + 800af0e: d310 bcc.n 800af32 + 800af10: f1b4 4fff cmp.w r4, #2139095040 @ 0x7f800000 + 800af14: d904 bls.n 800af20 + 800af16: ee70 7a00 vadd.f32 s15, s0, s0 + 800af1a: eeb0 0a67 vmov.f32 s0, s15 + 800af1e: bd38 pop {r3, r4, r5, pc} + 800af20: eddf 7a4d vldr s15, [pc, #308] @ 800b058 + 800af24: ed9f 7a4d vldr s14, [pc, #308] @ 800b05c + 800af28: 2d00 cmp r5, #0 + 800af2a: bfc8 it gt + 800af2c: eef0 7a47 vmovgt.f32 s15, s14 + 800af30: e7f3 b.n 800af1a + 800af32: 4b4b ldr r3, [pc, #300] @ (800b060 ) + 800af34: 429c cmp r4, r3 + 800af36: d810 bhi.n 800af5a + 800af38: f1b4 5f44 cmp.w r4, #822083584 @ 0x31000000 + 800af3c: d20a bcs.n 800af54 + 800af3e: ed9f 7a49 vldr s14, [pc, #292] @ 800b064 + 800af42: ee30 7a07 vadd.f32 s14, s0, s14 + 800af46: eef7 6a00 vmov.f32 s13, #112 @ 0x3f800000 1.0 + 800af4a: eeb4 7ae6 vcmpe.f32 s14, s13 + 800af4e: eef1 fa10 vmrs APSR_nzcv, fpscr + 800af52: dce2 bgt.n 800af1a + 800af54: f04f 33ff mov.w r3, #4294967295 + 800af58: e013 b.n 800af82 + 800af5a: f7ff f94b bl 800a1f4 + 800af5e: 4b42 ldr r3, [pc, #264] @ (800b068 ) + 800af60: 429c cmp r4, r3 + 800af62: d84f bhi.n 800b004 + 800af64: f5a3 03d0 sub.w r3, r3, #6815744 @ 0x680000 + 800af68: 429c cmp r4, r3 + 800af6a: d841 bhi.n 800aff0 + 800af6c: eef0 7a00 vmov.f32 s15, #0 @ 0x40000000 2.0 + 800af70: eebf 7a00 vmov.f32 s14, #240 @ 0xbf800000 -1.0 + 800af74: eea0 7a27 vfma.f32 s14, s0, s15 + 800af78: 2300 movs r3, #0 + 800af7a: ee30 0a27 vadd.f32 s0, s0, s15 + 800af7e: eec7 7a00 vdiv.f32 s15, s14, s0 + 800af82: 1c5a adds r2, r3, #1 + 800af84: ee27 6aa7 vmul.f32 s12, s15, s15 + 800af88: ed9f 7a38 vldr s14, [pc, #224] @ 800b06c + 800af8c: eddf 5a38 vldr s11, [pc, #224] @ 800b070 + 800af90: ed9f 5a38 vldr s10, [pc, #224] @ 800b074 + 800af94: ee66 6a06 vmul.f32 s13, s12, s12 + 800af98: eee6 5a87 vfma.f32 s11, s13, s14 + 800af9c: ed9f 7a36 vldr s14, [pc, #216] @ 800b078 + 800afa0: eea5 7aa6 vfma.f32 s14, s11, s13 + 800afa4: eddf 5a35 vldr s11, [pc, #212] @ 800b07c + 800afa8: eee7 5a26 vfma.f32 s11, s14, s13 + 800afac: ed9f 7a34 vldr s14, [pc, #208] @ 800b080 + 800afb0: eea5 7aa6 vfma.f32 s14, s11, s13 + 800afb4: eddf 5a33 vldr s11, [pc, #204] @ 800b084 + 800afb8: eee7 5a26 vfma.f32 s11, s14, s13 + 800afbc: ed9f 7a32 vldr s14, [pc, #200] @ 800b088 + 800afc0: eea6 5a87 vfma.f32 s10, s13, s14 + 800afc4: ed9f 7a31 vldr s14, [pc, #196] @ 800b08c + 800afc8: eea5 7a26 vfma.f32 s14, s10, s13 + 800afcc: ed9f 5a30 vldr s10, [pc, #192] @ 800b090 + 800afd0: eea7 5a26 vfma.f32 s10, s14, s13 + 800afd4: ed9f 7a2f vldr s14, [pc, #188] @ 800b094 + 800afd8: eea5 7a26 vfma.f32 s14, s10, s13 + 800afdc: ee27 7a26 vmul.f32 s14, s14, s13 + 800afe0: eea5 7a86 vfma.f32 s14, s11, s12 + 800afe4: ee27 7a87 vmul.f32 s14, s15, s14 + 800afe8: d121 bne.n 800b02e + 800afea: ee77 7ac7 vsub.f32 s15, s15, s14 + 800afee: e794 b.n 800af1a + 800aff0: eef7 7a00 vmov.f32 s15, #112 @ 0x3f800000 1.0 + 800aff4: ee30 7a67 vsub.f32 s14, s0, s15 + 800aff8: ee30 0a27 vadd.f32 s0, s0, s15 + 800affc: 2301 movs r3, #1 + 800affe: eec7 7a00 vdiv.f32 s15, s14, s0 + 800b002: e7be b.n 800af82 + 800b004: 4b24 ldr r3, [pc, #144] @ (800b098 ) + 800b006: 429c cmp r4, r3 + 800b008: d80b bhi.n 800b022 + 800b00a: eef7 7a08 vmov.f32 s15, #120 @ 0x3fc00000 1.5 + 800b00e: eeb7 7a00 vmov.f32 s14, #112 @ 0x3f800000 1.0 + 800b012: eea0 7a27 vfma.f32 s14, s0, s15 + 800b016: 2302 movs r3, #2 + 800b018: ee70 6a67 vsub.f32 s13, s0, s15 + 800b01c: eec6 7a87 vdiv.f32 s15, s13, s14 + 800b020: e7af b.n 800af82 + 800b022: eebf 7a00 vmov.f32 s14, #240 @ 0xbf800000 -1.0 + 800b026: eec7 7a00 vdiv.f32 s15, s14, s0 + 800b02a: 2303 movs r3, #3 + 800b02c: e7a9 b.n 800af82 + 800b02e: 4a1b ldr r2, [pc, #108] @ (800b09c ) + 800b030: 491b ldr r1, [pc, #108] @ (800b0a0 ) + 800b032: eb02 0283 add.w r2, r2, r3, lsl #2 + 800b036: eb01 0383 add.w r3, r1, r3, lsl #2 + 800b03a: edd3 6a00 vldr s13, [r3] + 800b03e: ee37 7a66 vsub.f32 s14, s14, s13 + 800b042: 2d00 cmp r5, #0 + 800b044: ee37 7a67 vsub.f32 s14, s14, s15 + 800b048: edd2 7a00 vldr s15, [r2] + 800b04c: ee77 7ac7 vsub.f32 s15, s15, s14 + 800b050: bfb8 it lt + 800b052: eef1 7a67 vneglt.f32 s15, s15 + 800b056: e760 b.n 800af1a + 800b058: bfc90fdb .word 0xbfc90fdb + 800b05c: 3fc90fdb .word 0x3fc90fdb + 800b060: 3edfffff .word 0x3edfffff + 800b064: 7149f2ca .word 0x7149f2ca + 800b068: 3f97ffff .word 0x3f97ffff + 800b06c: 3c8569d7 .word 0x3c8569d7 + 800b070: 3d4bda59 .word 0x3d4bda59 + 800b074: bd6ef16b .word 0xbd6ef16b + 800b078: 3d886b35 .word 0x3d886b35 + 800b07c: 3dba2e6e .word 0x3dba2e6e + 800b080: 3e124925 .word 0x3e124925 + 800b084: 3eaaaaab .word 0x3eaaaaab + 800b088: bd15a221 .word 0xbd15a221 + 800b08c: bd9d8795 .word 0xbd9d8795 + 800b090: bde38e38 .word 0xbde38e38 + 800b094: be4ccccd .word 0xbe4ccccd + 800b098: 401bffff .word 0x401bffff + 800b09c: 0800c08c .word 0x0800c08c + 800b0a0: 0800c07c .word 0x0800c07c + +0800b0a4 : + 800b0a4: ee10 3a10 vmov r3, s0 + 800b0a8: f033 4200 bics.w r2, r3, #2147483648 @ 0x80000000 + 800b0ac: d02b beq.n 800b106 + 800b0ae: f1b2 4fff cmp.w r2, #2139095040 @ 0x7f800000 + 800b0b2: d302 bcc.n 800b0ba + 800b0b4: ee30 0a00 vadd.f32 s0, s0, s0 + 800b0b8: 4770 bx lr + 800b0ba: f013 4fff tst.w r3, #2139095040 @ 0x7f800000 + 800b0be: d123 bne.n 800b108 + 800b0c0: 4b24 ldr r3, [pc, #144] @ (800b154 ) + 800b0c2: eddf 7a25 vldr s15, [pc, #148] @ 800b158 + 800b0c6: 4298 cmp r0, r3 + 800b0c8: ee20 0a27 vmul.f32 s0, s0, s15 + 800b0cc: db17 blt.n 800b0fe + 800b0ce: ee10 3a10 vmov r3, s0 + 800b0d2: f3c3 52c7 ubfx r2, r3, #23, #8 + 800b0d6: 3a19 subs r2, #25 + 800b0d8: f24c 3150 movw r1, #50000 @ 0xc350 + 800b0dc: 4288 cmp r0, r1 + 800b0de: dd15 ble.n 800b10c + 800b0e0: eddf 7a1e vldr s15, [pc, #120] @ 800b15c + 800b0e4: eddf 6a1e vldr s13, [pc, #120] @ 800b160 + 800b0e8: ee10 3a10 vmov r3, s0 + 800b0ec: eeb0 7a67 vmov.f32 s14, s15 + 800b0f0: 2b00 cmp r3, #0 + 800b0f2: bfb8 it lt + 800b0f4: eef0 7a66 vmovlt.f32 s15, s13 + 800b0f8: ee27 0a87 vmul.f32 s0, s15, s14 + 800b0fc: 4770 bx lr + 800b0fe: eddf 7a19 vldr s15, [pc, #100] @ 800b164 + 800b102: ee27 0a80 vmul.f32 s0, s15, s0 + 800b106: 4770 bx lr + 800b108: 0dd2 lsrs r2, r2, #23 + 800b10a: e7e5 b.n 800b0d8 + 800b10c: 4410 add r0, r2 + 800b10e: 28fe cmp r0, #254 @ 0xfe + 800b110: dce6 bgt.n 800b0e0 + 800b112: 2800 cmp r0, #0 + 800b114: dd06 ble.n 800b124 + 800b116: f023 43ff bic.w r3, r3, #2139095040 @ 0x7f800000 + 800b11a: ea43 53c0 orr.w r3, r3, r0, lsl #23 + 800b11e: ee00 3a10 vmov s0, r3 + 800b122: 4770 bx lr + 800b124: f110 0f16 cmn.w r0, #22 + 800b128: da09 bge.n 800b13e + 800b12a: eddf 7a0e vldr s15, [pc, #56] @ 800b164 + 800b12e: eddf 6a0e vldr s13, [pc, #56] @ 800b168 + 800b132: ee10 3a10 vmov r3, s0 + 800b136: eeb0 7a67 vmov.f32 s14, s15 + 800b13a: 2b00 cmp r3, #0 + 800b13c: e7d9 b.n 800b0f2 + 800b13e: 3019 adds r0, #25 + 800b140: f023 43ff bic.w r3, r3, #2139095040 @ 0x7f800000 + 800b144: ea43 53c0 orr.w r3, r3, r0, lsl #23 + 800b148: ed9f 0a08 vldr s0, [pc, #32] @ 800b16c + 800b14c: ee07 3a90 vmov s15, r3 + 800b150: e7d7 b.n 800b102 + 800b152: bf00 nop + 800b154: ffff3cb0 .word 0xffff3cb0 + 800b158: 4c000000 .word 0x4c000000 + 800b15c: 7149f2ca .word 0x7149f2ca + 800b160: f149f2ca .word 0xf149f2ca + 800b164: 0da24260 .word 0x0da24260 + 800b168: 8da24260 .word 0x8da24260 + 800b16c: 33000000 .word 0x33000000 + +0800b170 : + 800b170: b510 push {r4, lr} + 800b172: ed2d 8b02 vpush {d8} + 800b176: eeb0 8a40 vmov.f32 s16, s0 + 800b17a: 4604 mov r4, r0 + 800b17c: f7fc ff1a bl 8007fb4 <__errno> + 800b180: eeb0 0a48 vmov.f32 s0, s16 + 800b184: ecbd 8b02 vpop {d8} + 800b188: 6004 str r4, [r0, #0] + 800b18a: bd10 pop {r4, pc} + +0800b18c : + 800b18c: b130 cbz r0, 800b19c + 800b18e: eef1 7a40 vneg.f32 s15, s0 + 800b192: ee27 0a80 vmul.f32 s0, s15, s0 + 800b196: 2022 movs r0, #34 @ 0x22 + 800b198: f7ff bfea b.w 800b170 + 800b19c: eef0 7a40 vmov.f32 s15, s0 + 800b1a0: e7f7 b.n 800b192 + ... + +0800b1a4 <__math_uflowf>: + 800b1a4: ed9f 0a01 vldr s0, [pc, #4] @ 800b1ac <__math_uflowf+0x8> + 800b1a8: f7ff bff0 b.w 800b18c + 800b1ac: 10000000 .word 0x10000000 + +0800b1b0 <__math_oflowf>: + 800b1b0: ed9f 0a01 vldr s0, [pc, #4] @ 800b1b8 <__math_oflowf+0x8> + 800b1b4: f7ff bfea b.w 800b18c + 800b1b8: 70000000 .word 0x70000000 + +0800b1bc <__kernel_rem_pio2f>: + 800b1bc: e92d 4ff0 stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, fp, lr} + 800b1c0: ed2d 8b04 vpush {d8-d9} + 800b1c4: b0d9 sub sp, #356 @ 0x164 + 800b1c6: 4690 mov r8, r2 + 800b1c8: 9001 str r0, [sp, #4] + 800b1ca: 4ab6 ldr r2, [pc, #728] @ (800b4a4 <__kernel_rem_pio2f+0x2e8>) + 800b1cc: 9866 ldr r0, [sp, #408] @ 0x198 + 800b1ce: f118 0f04 cmn.w r8, #4 + 800b1d2: f852 a020 ldr.w sl, [r2, r0, lsl #2] + 800b1d6: 460f mov r7, r1 + 800b1d8: f103 3bff add.w fp, r3, #4294967295 + 800b1dc: db26 blt.n 800b22c <__kernel_rem_pio2f+0x70> + 800b1de: f1b8 0203 subs.w r2, r8, #3 + 800b1e2: bf48 it mi + 800b1e4: f108 0204 addmi.w r2, r8, #4 + 800b1e8: 10d2 asrs r2, r2, #3 + 800b1ea: 1c55 adds r5, r2, #1 + 800b1ec: 9967 ldr r1, [sp, #412] @ 0x19c + 800b1ee: ed9f 7ab1 vldr s14, [pc, #708] @ 800b4b4 <__kernel_rem_pio2f+0x2f8> + 800b1f2: 00e8 lsls r0, r5, #3 + 800b1f4: eba2 060b sub.w r6, r2, fp + 800b1f8: 9002 str r0, [sp, #8] + 800b1fa: eba8 05c5 sub.w r5, r8, r5, lsl #3 + 800b1fe: eb0a 0c0b add.w ip, sl, fp + 800b202: ac1c add r4, sp, #112 @ 0x70 + 800b204: eb01 0e86 add.w lr, r1, r6, lsl #2 + 800b208: 2000 movs r0, #0 + 800b20a: 4560 cmp r0, ip + 800b20c: dd10 ble.n 800b230 <__kernel_rem_pio2f+0x74> + 800b20e: a91c add r1, sp, #112 @ 0x70 + 800b210: eb01 0083 add.w r0, r1, r3, lsl #2 + 800b214: f50d 7988 add.w r9, sp, #272 @ 0x110 + 800b218: 2600 movs r6, #0 + 800b21a: 4556 cmp r6, sl + 800b21c: dc24 bgt.n 800b268 <__kernel_rem_pio2f+0xac> + 800b21e: f8dd e004 ldr.w lr, [sp, #4] + 800b222: eddf 7aa4 vldr s15, [pc, #656] @ 800b4b4 <__kernel_rem_pio2f+0x2f8> + 800b226: 4684 mov ip, r0 + 800b228: 2400 movs r4, #0 + 800b22a: e016 b.n 800b25a <__kernel_rem_pio2f+0x9e> + 800b22c: 2200 movs r2, #0 + 800b22e: e7dc b.n 800b1ea <__kernel_rem_pio2f+0x2e> + 800b230: 42c6 cmn r6, r0 + 800b232: bf5d ittte pl + 800b234: f85e 1020 ldrpl.w r1, [lr, r0, lsl #2] + 800b238: ee07 1a90 vmovpl s15, r1 + 800b23c: eef8 7ae7 vcvtpl.f32.s32 s15, s15 + 800b240: eef0 7a47 vmovmi.f32 s15, s14 + 800b244: ece4 7a01 vstmia r4!, {s15} + 800b248: 3001 adds r0, #1 + 800b24a: e7de b.n 800b20a <__kernel_rem_pio2f+0x4e> + 800b24c: ecfe 6a01 vldmia lr!, {s13} + 800b250: ed3c 7a01 vldmdb ip!, {s14} + 800b254: eee6 7a87 vfma.f32 s15, s13, s14 + 800b258: 3401 adds r4, #1 + 800b25a: 455c cmp r4, fp + 800b25c: ddf6 ble.n 800b24c <__kernel_rem_pio2f+0x90> + 800b25e: ece9 7a01 vstmia r9!, {s15} + 800b262: 3601 adds r6, #1 + 800b264: 3004 adds r0, #4 + 800b266: e7d8 b.n 800b21a <__kernel_rem_pio2f+0x5e> + 800b268: a908 add r1, sp, #32 + 800b26a: eb01 018a add.w r1, r1, sl, lsl #2 + 800b26e: 9104 str r1, [sp, #16] + 800b270: 9967 ldr r1, [sp, #412] @ 0x19c + 800b272: eddf 8a8f vldr s17, [pc, #572] @ 800b4b0 <__kernel_rem_pio2f+0x2f4> + 800b276: ed9f 9a8d vldr s18, [pc, #564] @ 800b4ac <__kernel_rem_pio2f+0x2f0> + 800b27a: eb01 0282 add.w r2, r1, r2, lsl #2 + 800b27e: 9203 str r2, [sp, #12] + 800b280: 4654 mov r4, sl + 800b282: 00a2 lsls r2, r4, #2 + 800b284: 9205 str r2, [sp, #20] + 800b286: aa58 add r2, sp, #352 @ 0x160 + 800b288: eb02 0284 add.w r2, r2, r4, lsl #2 + 800b28c: ed12 0a14 vldr s0, [r2, #-80] @ 0xffffffb0 + 800b290: a944 add r1, sp, #272 @ 0x110 + 800b292: aa08 add r2, sp, #32 + 800b294: eb01 0084 add.w r0, r1, r4, lsl #2 + 800b298: 4694 mov ip, r2 + 800b29a: 4626 mov r6, r4 + 800b29c: 2e00 cmp r6, #0 + 800b29e: dc4c bgt.n 800b33a <__kernel_rem_pio2f+0x17e> + 800b2a0: 4628 mov r0, r5 + 800b2a2: e9cd 2306 strd r2, r3, [sp, #24] + 800b2a6: f7ff fefd bl 800b0a4 + 800b2aa: eeb0 8a40 vmov.f32 s16, s0 + 800b2ae: eeb4 0a00 vmov.f32 s0, #64 @ 0x3e000000 0.125 + 800b2b2: ee28 0a00 vmul.f32 s0, s16, s0 + 800b2b6: f000 f9e9 bl 800b68c + 800b2ba: eef2 7a00 vmov.f32 s15, #32 @ 0x41000000 8.0 + 800b2be: eea0 8a67 vfms.f32 s16, s0, s15 + 800b2c2: 2d00 cmp r5, #0 + 800b2c4: e9dd 2306 ldrd r2, r3, [sp, #24] + 800b2c8: eefd 7ac8 vcvt.s32.f32 s15, s16 + 800b2cc: ee17 9a90 vmov r9, s15 + 800b2d0: eef8 7ae7 vcvt.f32.s32 s15, s15 + 800b2d4: ee38 8a67 vsub.f32 s16, s16, s15 + 800b2d8: dd41 ble.n 800b35e <__kernel_rem_pio2f+0x1a2> + 800b2da: f104 3cff add.w ip, r4, #4294967295 + 800b2de: a908 add r1, sp, #32 + 800b2e0: f1c5 0e08 rsb lr, r5, #8 + 800b2e4: f851 602c ldr.w r6, [r1, ip, lsl #2] + 800b2e8: fa46 f00e asr.w r0, r6, lr + 800b2ec: 4481 add r9, r0 + 800b2ee: fa00 f00e lsl.w r0, r0, lr + 800b2f2: 1a36 subs r6, r6, r0 + 800b2f4: f1c5 0007 rsb r0, r5, #7 + 800b2f8: f841 602c str.w r6, [r1, ip, lsl #2] + 800b2fc: 4106 asrs r6, r0 + 800b2fe: 2e00 cmp r6, #0 + 800b300: dd3c ble.n 800b37c <__kernel_rem_pio2f+0x1c0> + 800b302: f04f 0e00 mov.w lr, #0 + 800b306: f109 0901 add.w r9, r9, #1 + 800b30a: 4670 mov r0, lr + 800b30c: 4574 cmp r4, lr + 800b30e: dc68 bgt.n 800b3e2 <__kernel_rem_pio2f+0x226> + 800b310: 2d00 cmp r5, #0 + 800b312: dd03 ble.n 800b31c <__kernel_rem_pio2f+0x160> + 800b314: 2d01 cmp r5, #1 + 800b316: d074 beq.n 800b402 <__kernel_rem_pio2f+0x246> + 800b318: 2d02 cmp r5, #2 + 800b31a: d07d beq.n 800b418 <__kernel_rem_pio2f+0x25c> + 800b31c: 2e02 cmp r6, #2 + 800b31e: d12d bne.n 800b37c <__kernel_rem_pio2f+0x1c0> + 800b320: eeb7 0a00 vmov.f32 s0, #112 @ 0x3f800000 1.0 + 800b324: ee30 8a48 vsub.f32 s16, s0, s16 + 800b328: b340 cbz r0, 800b37c <__kernel_rem_pio2f+0x1c0> + 800b32a: 4628 mov r0, r5 + 800b32c: 9306 str r3, [sp, #24] + 800b32e: f7ff feb9 bl 800b0a4 + 800b332: 9b06 ldr r3, [sp, #24] + 800b334: ee38 8a40 vsub.f32 s16, s16, s0 + 800b338: e020 b.n 800b37c <__kernel_rem_pio2f+0x1c0> + 800b33a: ee60 7a28 vmul.f32 s15, s0, s17 + 800b33e: 3e01 subs r6, #1 + 800b340: eefd 7ae7 vcvt.s32.f32 s15, s15 + 800b344: eef8 7ae7 vcvt.f32.s32 s15, s15 + 800b348: eea7 0ac9 vfms.f32 s0, s15, s18 + 800b34c: eebd 0ac0 vcvt.s32.f32 s0, s0 + 800b350: ecac 0a01 vstmia ip!, {s0} + 800b354: ed30 0a01 vldmdb r0!, {s0} + 800b358: ee37 0a80 vadd.f32 s0, s15, s0 + 800b35c: e79e b.n 800b29c <__kernel_rem_pio2f+0xe0> + 800b35e: d105 bne.n 800b36c <__kernel_rem_pio2f+0x1b0> + 800b360: 1e60 subs r0, r4, #1 + 800b362: a908 add r1, sp, #32 + 800b364: f851 6020 ldr.w r6, [r1, r0, lsl #2] + 800b368: 11f6 asrs r6, r6, #7 + 800b36a: e7c8 b.n 800b2fe <__kernel_rem_pio2f+0x142> + 800b36c: eef6 7a00 vmov.f32 s15, #96 @ 0x3f000000 0.5 + 800b370: eeb4 8ae7 vcmpe.f32 s16, s15 + 800b374: eef1 fa10 vmrs APSR_nzcv, fpscr + 800b378: da31 bge.n 800b3de <__kernel_rem_pio2f+0x222> + 800b37a: 2600 movs r6, #0 + 800b37c: eeb5 8a40 vcmp.f32 s16, #0.0 + 800b380: eef1 fa10 vmrs APSR_nzcv, fpscr + 800b384: f040 8098 bne.w 800b4b8 <__kernel_rem_pio2f+0x2fc> + 800b388: 1e60 subs r0, r4, #1 + 800b38a: 2200 movs r2, #0 + 800b38c: 4550 cmp r0, sl + 800b38e: da4b bge.n 800b428 <__kernel_rem_pio2f+0x26c> + 800b390: 2a00 cmp r2, #0 + 800b392: d065 beq.n 800b460 <__kernel_rem_pio2f+0x2a4> + 800b394: 3c01 subs r4, #1 + 800b396: ab08 add r3, sp, #32 + 800b398: 3d08 subs r5, #8 + 800b39a: f853 3024 ldr.w r3, [r3, r4, lsl #2] + 800b39e: 2b00 cmp r3, #0 + 800b3a0: d0f8 beq.n 800b394 <__kernel_rem_pio2f+0x1d8> + 800b3a2: 4628 mov r0, r5 + 800b3a4: eeb7 0a00 vmov.f32 s0, #112 @ 0x3f800000 1.0 + 800b3a8: f7ff fe7c bl 800b0a4 + 800b3ac: 1c63 adds r3, r4, #1 + 800b3ae: aa44 add r2, sp, #272 @ 0x110 + 800b3b0: ed9f 7a3f vldr s14, [pc, #252] @ 800b4b0 <__kernel_rem_pio2f+0x2f4> + 800b3b4: 0099 lsls r1, r3, #2 + 800b3b6: eb02 0283 add.w r2, r2, r3, lsl #2 + 800b3ba: 4623 mov r3, r4 + 800b3bc: 2b00 cmp r3, #0 + 800b3be: f280 80a9 bge.w 800b514 <__kernel_rem_pio2f+0x358> + 800b3c2: 4623 mov r3, r4 + 800b3c4: 2b00 cmp r3, #0 + 800b3c6: f2c0 80c7 blt.w 800b558 <__kernel_rem_pio2f+0x39c> + 800b3ca: aa44 add r2, sp, #272 @ 0x110 + 800b3cc: eb02 0583 add.w r5, r2, r3, lsl #2 + 800b3d0: f8df c0d4 ldr.w ip, [pc, #212] @ 800b4a8 <__kernel_rem_pio2f+0x2ec> + 800b3d4: eddf 7a37 vldr s15, [pc, #220] @ 800b4b4 <__kernel_rem_pio2f+0x2f8> + 800b3d8: 2000 movs r0, #0 + 800b3da: 1ae2 subs r2, r4, r3 + 800b3dc: e0b1 b.n 800b542 <__kernel_rem_pio2f+0x386> + 800b3de: 2602 movs r6, #2 + 800b3e0: e78f b.n 800b302 <__kernel_rem_pio2f+0x146> + 800b3e2: f852 1b04 ldr.w r1, [r2], #4 + 800b3e6: b948 cbnz r0, 800b3fc <__kernel_rem_pio2f+0x240> + 800b3e8: b121 cbz r1, 800b3f4 <__kernel_rem_pio2f+0x238> + 800b3ea: f5c1 7180 rsb r1, r1, #256 @ 0x100 + 800b3ee: f842 1c04 str.w r1, [r2, #-4] + 800b3f2: 2101 movs r1, #1 + 800b3f4: f10e 0e01 add.w lr, lr, #1 + 800b3f8: 4608 mov r0, r1 + 800b3fa: e787 b.n 800b30c <__kernel_rem_pio2f+0x150> + 800b3fc: f1c1 01ff rsb r1, r1, #255 @ 0xff + 800b400: e7f5 b.n 800b3ee <__kernel_rem_pio2f+0x232> + 800b402: f104 3cff add.w ip, r4, #4294967295 + 800b406: aa08 add r2, sp, #32 + 800b408: f852 202c ldr.w r2, [r2, ip, lsl #2] + 800b40c: f002 027f and.w r2, r2, #127 @ 0x7f + 800b410: a908 add r1, sp, #32 + 800b412: f841 202c str.w r2, [r1, ip, lsl #2] + 800b416: e781 b.n 800b31c <__kernel_rem_pio2f+0x160> + 800b418: f104 3cff add.w ip, r4, #4294967295 + 800b41c: aa08 add r2, sp, #32 + 800b41e: f852 202c ldr.w r2, [r2, ip, lsl #2] + 800b422: f002 023f and.w r2, r2, #63 @ 0x3f + 800b426: e7f3 b.n 800b410 <__kernel_rem_pio2f+0x254> + 800b428: a908 add r1, sp, #32 + 800b42a: f851 1020 ldr.w r1, [r1, r0, lsl #2] + 800b42e: 3801 subs r0, #1 + 800b430: 430a orrs r2, r1 + 800b432: e7ab b.n 800b38c <__kernel_rem_pio2f+0x1d0> + 800b434: 3201 adds r2, #1 + 800b436: f850 6d04 ldr.w r6, [r0, #-4]! + 800b43a: 2e00 cmp r6, #0 + 800b43c: d0fa beq.n 800b434 <__kernel_rem_pio2f+0x278> + 800b43e: 9905 ldr r1, [sp, #20] + 800b440: f501 71b0 add.w r1, r1, #352 @ 0x160 + 800b444: eb0d 0001 add.w r0, sp, r1 + 800b448: 18e6 adds r6, r4, r3 + 800b44a: a91c add r1, sp, #112 @ 0x70 + 800b44c: f104 0c01 add.w ip, r4, #1 + 800b450: 384c subs r0, #76 @ 0x4c + 800b452: eb01 0686 add.w r6, r1, r6, lsl #2 + 800b456: 4422 add r2, r4 + 800b458: 4562 cmp r2, ip + 800b45a: da04 bge.n 800b466 <__kernel_rem_pio2f+0x2aa> + 800b45c: 4614 mov r4, r2 + 800b45e: e710 b.n 800b282 <__kernel_rem_pio2f+0xc6> + 800b460: 9804 ldr r0, [sp, #16] + 800b462: 2201 movs r2, #1 + 800b464: e7e7 b.n 800b436 <__kernel_rem_pio2f+0x27a> + 800b466: 9903 ldr r1, [sp, #12] + 800b468: f8dd e004 ldr.w lr, [sp, #4] + 800b46c: f851 102c ldr.w r1, [r1, ip, lsl #2] + 800b470: 9105 str r1, [sp, #20] + 800b472: ee07 1a90 vmov s15, r1 + 800b476: eef8 7ae7 vcvt.f32.s32 s15, s15 + 800b47a: 2400 movs r4, #0 + 800b47c: ece6 7a01 vstmia r6!, {s15} + 800b480: eddf 7a0c vldr s15, [pc, #48] @ 800b4b4 <__kernel_rem_pio2f+0x2f8> + 800b484: 46b1 mov r9, r6 + 800b486: 455c cmp r4, fp + 800b488: dd04 ble.n 800b494 <__kernel_rem_pio2f+0x2d8> + 800b48a: ece0 7a01 vstmia r0!, {s15} + 800b48e: f10c 0c01 add.w ip, ip, #1 + 800b492: e7e1 b.n 800b458 <__kernel_rem_pio2f+0x29c> + 800b494: ecfe 6a01 vldmia lr!, {s13} + 800b498: ed39 7a01 vldmdb r9!, {s14} + 800b49c: 3401 adds r4, #1 + 800b49e: eee6 7a87 vfma.f32 s15, s13, s14 + 800b4a2: e7f0 b.n 800b486 <__kernel_rem_pio2f+0x2ca> + 800b4a4: 0800c0c8 .word 0x0800c0c8 + 800b4a8: 0800c09c .word 0x0800c09c + 800b4ac: 43800000 .word 0x43800000 + 800b4b0: 3b800000 .word 0x3b800000 + 800b4b4: 00000000 .word 0x00000000 + 800b4b8: 9b02 ldr r3, [sp, #8] + 800b4ba: eeb0 0a48 vmov.f32 s0, s16 + 800b4be: eba3 0008 sub.w r0, r3, r8 + 800b4c2: f7ff fdef bl 800b0a4 + 800b4c6: ed1f 7a07 vldr s14, [pc, #-28] @ 800b4ac <__kernel_rem_pio2f+0x2f0> + 800b4ca: eeb4 0ac7 vcmpe.f32 s0, s14 + 800b4ce: eef1 fa10 vmrs APSR_nzcv, fpscr + 800b4d2: db19 blt.n 800b508 <__kernel_rem_pio2f+0x34c> + 800b4d4: ed5f 7a0a vldr s15, [pc, #-40] @ 800b4b0 <__kernel_rem_pio2f+0x2f4> + 800b4d8: ee60 7a27 vmul.f32 s15, s0, s15 + 800b4dc: aa08 add r2, sp, #32 + 800b4de: eefd 7ae7 vcvt.s32.f32 s15, s15 + 800b4e2: 3508 adds r5, #8 + 800b4e4: eef8 7ae7 vcvt.f32.s32 s15, s15 + 800b4e8: eea7 0ac7 vfms.f32 s0, s15, s14 + 800b4ec: eefd 7ae7 vcvt.s32.f32 s15, s15 + 800b4f0: eebd 0ac0 vcvt.s32.f32 s0, s0 + 800b4f4: ee10 3a10 vmov r3, s0 + 800b4f8: f842 3024 str.w r3, [r2, r4, lsl #2] + 800b4fc: ee17 3a90 vmov r3, s15 + 800b500: 3401 adds r4, #1 + 800b502: f842 3024 str.w r3, [r2, r4, lsl #2] + 800b506: e74c b.n 800b3a2 <__kernel_rem_pio2f+0x1e6> + 800b508: eebd 0ac0 vcvt.s32.f32 s0, s0 + 800b50c: aa08 add r2, sp, #32 + 800b50e: ee10 3a10 vmov r3, s0 + 800b512: e7f6 b.n 800b502 <__kernel_rem_pio2f+0x346> + 800b514: a808 add r0, sp, #32 + 800b516: f850 0023 ldr.w r0, [r0, r3, lsl #2] + 800b51a: 9001 str r0, [sp, #4] + 800b51c: ee07 0a90 vmov s15, r0 + 800b520: eef8 7ae7 vcvt.f32.s32 s15, s15 + 800b524: 3b01 subs r3, #1 + 800b526: ee67 7a80 vmul.f32 s15, s15, s0 + 800b52a: ee20 0a07 vmul.f32 s0, s0, s14 + 800b52e: ed62 7a01 vstmdb r2!, {s15} + 800b532: e743 b.n 800b3bc <__kernel_rem_pio2f+0x200> + 800b534: ecfc 6a01 vldmia ip!, {s13} + 800b538: ecb5 7a01 vldmia r5!, {s14} + 800b53c: eee6 7a87 vfma.f32 s15, s13, s14 + 800b540: 3001 adds r0, #1 + 800b542: 4550 cmp r0, sl + 800b544: dc01 bgt.n 800b54a <__kernel_rem_pio2f+0x38e> + 800b546: 4290 cmp r0, r2 + 800b548: ddf4 ble.n 800b534 <__kernel_rem_pio2f+0x378> + 800b54a: a858 add r0, sp, #352 @ 0x160 + 800b54c: eb00 0282 add.w r2, r0, r2, lsl #2 + 800b550: ed42 7a28 vstr s15, [r2, #-160] @ 0xffffff60 + 800b554: 3b01 subs r3, #1 + 800b556: e735 b.n 800b3c4 <__kernel_rem_pio2f+0x208> + 800b558: 9b66 ldr r3, [sp, #408] @ 0x198 + 800b55a: 2b02 cmp r3, #2 + 800b55c: dc09 bgt.n 800b572 <__kernel_rem_pio2f+0x3b6> + 800b55e: 2b00 cmp r3, #0 + 800b560: dc27 bgt.n 800b5b2 <__kernel_rem_pio2f+0x3f6> + 800b562: d040 beq.n 800b5e6 <__kernel_rem_pio2f+0x42a> + 800b564: f009 0007 and.w r0, r9, #7 + 800b568: b059 add sp, #356 @ 0x164 + 800b56a: ecbd 8b04 vpop {d8-d9} + 800b56e: e8bd 8ff0 ldmia.w sp!, {r4, r5, r6, r7, r8, r9, sl, fp, pc} + 800b572: 9b66 ldr r3, [sp, #408] @ 0x198 + 800b574: 2b03 cmp r3, #3 + 800b576: d1f5 bne.n 800b564 <__kernel_rem_pio2f+0x3a8> + 800b578: aa30 add r2, sp, #192 @ 0xc0 + 800b57a: 1f0b subs r3, r1, #4 + 800b57c: 4413 add r3, r2 + 800b57e: 461a mov r2, r3 + 800b580: 4620 mov r0, r4 + 800b582: 2800 cmp r0, #0 + 800b584: dc50 bgt.n 800b628 <__kernel_rem_pio2f+0x46c> + 800b586: 4622 mov r2, r4 + 800b588: 2a01 cmp r2, #1 + 800b58a: dc5d bgt.n 800b648 <__kernel_rem_pio2f+0x48c> + 800b58c: ab30 add r3, sp, #192 @ 0xc0 + 800b58e: ed5f 7a37 vldr s15, [pc, #-220] @ 800b4b4 <__kernel_rem_pio2f+0x2f8> + 800b592: 440b add r3, r1 + 800b594: 2c01 cmp r4, #1 + 800b596: dc67 bgt.n 800b668 <__kernel_rem_pio2f+0x4ac> + 800b598: eddd 6a30 vldr s13, [sp, #192] @ 0xc0 + 800b59c: ed9d 7a31 vldr s14, [sp, #196] @ 0xc4 + 800b5a0: 2e00 cmp r6, #0 + 800b5a2: d167 bne.n 800b674 <__kernel_rem_pio2f+0x4b8> + 800b5a4: edc7 6a00 vstr s13, [r7] + 800b5a8: ed87 7a01 vstr s14, [r7, #4] + 800b5ac: edc7 7a02 vstr s15, [r7, #8] + 800b5b0: e7d8 b.n 800b564 <__kernel_rem_pio2f+0x3a8> + 800b5b2: ab30 add r3, sp, #192 @ 0xc0 + 800b5b4: ed1f 7a41 vldr s14, [pc, #-260] @ 800b4b4 <__kernel_rem_pio2f+0x2f8> + 800b5b8: 440b add r3, r1 + 800b5ba: 4622 mov r2, r4 + 800b5bc: 2a00 cmp r2, #0 + 800b5be: da24 bge.n 800b60a <__kernel_rem_pio2f+0x44e> + 800b5c0: b34e cbz r6, 800b616 <__kernel_rem_pio2f+0x45a> + 800b5c2: eef1 7a47 vneg.f32 s15, s14 + 800b5c6: edc7 7a00 vstr s15, [r7] + 800b5ca: eddd 7a30 vldr s15, [sp, #192] @ 0xc0 + 800b5ce: ee77 7ac7 vsub.f32 s15, s15, s14 + 800b5d2: aa31 add r2, sp, #196 @ 0xc4 + 800b5d4: 2301 movs r3, #1 + 800b5d6: 429c cmp r4, r3 + 800b5d8: da20 bge.n 800b61c <__kernel_rem_pio2f+0x460> + 800b5da: b10e cbz r6, 800b5e0 <__kernel_rem_pio2f+0x424> + 800b5dc: eef1 7a67 vneg.f32 s15, s15 + 800b5e0: edc7 7a01 vstr s15, [r7, #4] + 800b5e4: e7be b.n 800b564 <__kernel_rem_pio2f+0x3a8> + 800b5e6: ab30 add r3, sp, #192 @ 0xc0 + 800b5e8: ed5f 7a4e vldr s15, [pc, #-312] @ 800b4b4 <__kernel_rem_pio2f+0x2f8> + 800b5ec: 440b add r3, r1 + 800b5ee: 2c00 cmp r4, #0 + 800b5f0: da05 bge.n 800b5fe <__kernel_rem_pio2f+0x442> + 800b5f2: b10e cbz r6, 800b5f8 <__kernel_rem_pio2f+0x43c> + 800b5f4: eef1 7a67 vneg.f32 s15, s15 + 800b5f8: edc7 7a00 vstr s15, [r7] + 800b5fc: e7b2 b.n 800b564 <__kernel_rem_pio2f+0x3a8> + 800b5fe: ed33 7a01 vldmdb r3!, {s14} + 800b602: 3c01 subs r4, #1 + 800b604: ee77 7a87 vadd.f32 s15, s15, s14 + 800b608: e7f1 b.n 800b5ee <__kernel_rem_pio2f+0x432> + 800b60a: ed73 7a01 vldmdb r3!, {s15} + 800b60e: 3a01 subs r2, #1 + 800b610: ee37 7a27 vadd.f32 s14, s14, s15 + 800b614: e7d2 b.n 800b5bc <__kernel_rem_pio2f+0x400> + 800b616: eef0 7a47 vmov.f32 s15, s14 + 800b61a: e7d4 b.n 800b5c6 <__kernel_rem_pio2f+0x40a> + 800b61c: ecb2 7a01 vldmia r2!, {s14} + 800b620: 3301 adds r3, #1 + 800b622: ee77 7a87 vadd.f32 s15, s15, s14 + 800b626: e7d6 b.n 800b5d6 <__kernel_rem_pio2f+0x41a> + 800b628: ed72 7a01 vldmdb r2!, {s15} + 800b62c: edd2 6a01 vldr s13, [r2, #4] + 800b630: ee37 7aa6 vadd.f32 s14, s15, s13 + 800b634: 3801 subs r0, #1 + 800b636: ee77 7ac7 vsub.f32 s15, s15, s14 + 800b63a: ed82 7a00 vstr s14, [r2] + 800b63e: ee77 7aa6 vadd.f32 s15, s15, s13 + 800b642: edc2 7a01 vstr s15, [r2, #4] + 800b646: e79c b.n 800b582 <__kernel_rem_pio2f+0x3c6> + 800b648: ed73 7a01 vldmdb r3!, {s15} + 800b64c: edd3 6a01 vldr s13, [r3, #4] + 800b650: ee37 7aa6 vadd.f32 s14, s15, s13 + 800b654: 3a01 subs r2, #1 + 800b656: ee77 7ac7 vsub.f32 s15, s15, s14 + 800b65a: ed83 7a00 vstr s14, [r3] + 800b65e: ee77 7aa6 vadd.f32 s15, s15, s13 + 800b662: edc3 7a01 vstr s15, [r3, #4] + 800b666: e78f b.n 800b588 <__kernel_rem_pio2f+0x3cc> + 800b668: ed33 7a01 vldmdb r3!, {s14} + 800b66c: 3c01 subs r4, #1 + 800b66e: ee77 7a87 vadd.f32 s15, s15, s14 + 800b672: e78f b.n 800b594 <__kernel_rem_pio2f+0x3d8> + 800b674: eef1 6a66 vneg.f32 s13, s13 + 800b678: eeb1 7a47 vneg.f32 s14, s14 + 800b67c: edc7 6a00 vstr s13, [r7] + 800b680: ed87 7a01 vstr s14, [r7, #4] + 800b684: eef1 7a67 vneg.f32 s15, s15 + 800b688: e790 b.n 800b5ac <__kernel_rem_pio2f+0x3f0> + 800b68a: bf00 nop + +0800b68c : + 800b68c: ee10 3a10 vmov r3, s0 + 800b690: f3c3 52c7 ubfx r2, r3, #23, #8 + 800b694: 3a7f subs r2, #127 @ 0x7f + 800b696: 2a16 cmp r2, #22 + 800b698: f023 4100 bic.w r1, r3, #2147483648 @ 0x80000000 + 800b69c: dc2b bgt.n 800b6f6 + 800b69e: 2a00 cmp r2, #0 + 800b6a0: da12 bge.n 800b6c8 + 800b6a2: eddf 7a19 vldr s15, [pc, #100] @ 800b708 + 800b6a6: ee30 0a27 vadd.f32 s0, s0, s15 + 800b6aa: eeb5 0ac0 vcmpe.f32 s0, #0.0 + 800b6ae: eef1 fa10 vmrs APSR_nzcv, fpscr + 800b6b2: dd06 ble.n 800b6c2 + 800b6b4: 2b00 cmp r3, #0 + 800b6b6: da24 bge.n 800b702 + 800b6b8: 2900 cmp r1, #0 + 800b6ba: 4b14 ldr r3, [pc, #80] @ (800b70c ) + 800b6bc: bf08 it eq + 800b6be: f04f 4300 moveq.w r3, #2147483648 @ 0x80000000 + 800b6c2: ee00 3a10 vmov s0, r3 + 800b6c6: 4770 bx lr + 800b6c8: 4911 ldr r1, [pc, #68] @ (800b710 ) + 800b6ca: 4111 asrs r1, r2 + 800b6cc: 420b tst r3, r1 + 800b6ce: d0fa beq.n 800b6c6 + 800b6d0: eddf 7a0d vldr s15, [pc, #52] @ 800b708 + 800b6d4: ee30 0a27 vadd.f32 s0, s0, s15 + 800b6d8: eeb5 0ac0 vcmpe.f32 s0, #0.0 + 800b6dc: eef1 fa10 vmrs APSR_nzcv, fpscr + 800b6e0: ddef ble.n 800b6c2 + 800b6e2: 2b00 cmp r3, #0 + 800b6e4: bfbe ittt lt + 800b6e6: f44f 0000 movlt.w r0, #8388608 @ 0x800000 + 800b6ea: fa40 f202 asrlt.w r2, r0, r2 + 800b6ee: 189b addlt r3, r3, r2 + 800b6f0: ea23 0301 bic.w r3, r3, r1 + 800b6f4: e7e5 b.n 800b6c2 + 800b6f6: f1b1 4fff cmp.w r1, #2139095040 @ 0x7f800000 + 800b6fa: d3e4 bcc.n 800b6c6 + 800b6fc: ee30 0a00 vadd.f32 s0, s0, s0 + 800b700: 4770 bx lr + 800b702: 2300 movs r3, #0 + 800b704: e7dd b.n 800b6c2 + 800b706: bf00 nop + 800b708: 7149f2ca .word 0x7149f2ca + 800b70c: bf800000 .word 0xbf800000 + 800b710: 007fffff .word 0x007fffff + +0800b714 <_init>: + 800b714: b5f8 push {r3, r4, r5, r6, r7, lr} + 800b716: bf00 nop + 800b718: bcf8 pop {r3, r4, r5, r6, r7} + 800b71a: bc08 pop {r3} + 800b71c: 469e mov lr, r3 + 800b71e: 4770 bx lr + +0800b720 <_fini>: + 800b720: b5f8 push {r3, r4, r5, r6, r7, lr} + 800b722: bf00 nop + 800b724: bcf8 pop {r3, r4, r5, r6, r7} + 800b726: bc08 pop {r3} + 800b728: 469e mov lr, r3 + 800b72a: 4770 bx lr diff --git a/Debug/moto-perf.map b/Debug/moto-perf.map new file mode 100644 index 0000000..e56ec2d --- /dev/null +++ b/Debug/moto-perf.map @@ -0,0 +1,5103 @@ +Archive member included to satisfy reference by file (symbol) + +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-exit.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard/crt0.o (exit) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) + (_printf_float) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_i.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) (_printf_common) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-exit.o) (__stdio_exit_handler) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fwalk.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) (_fwalk_sglue) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-printf.o) + ./Core/Src/main.o (printf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-snprintf.o) + ./Core/Src/moto_config.o (snprintf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) (__sread) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memset.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard/crt0.o (memset) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-localeconv.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) (_localeconv_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-closer.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) (_close_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reent.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-closer.o) (errno) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-impure.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-printf.o) (_impure_ptr) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lseekr.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) (_lseek_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-readr.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) (_read_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-writer.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) (_write_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-errno.o) + ./Core/Src/syscalls.o (__errno) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-init.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard/crt0.o (__libc_init_array) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) (__retarget_lock_init_recursive) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memchr.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_i.o) (memchr) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strlen.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) (strlen) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) (_dtoa_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-freer.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reent.o) (_free_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-malloc.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) (malloc) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mallocr.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) (_malloc_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mlock.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-freer.o) (__malloc_lock) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) (_Balloc) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-svfprintf.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-snprintf.o) (_svfprintf_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-printf.o) (_vfprintf_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fflush.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) (_fflush_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fvwrite.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) (__sfvwrite_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wbuf.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) (__swbuf_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wsetup.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) (__swsetup_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memmove.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-svfprintf.o) (memmove) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-localeconv.o) (__global_locale) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-sbrkr.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mallocr.o) (_sbrk_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strcmp.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) (strcmp) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memcpy-stub.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) (memcpy) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-assert.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) (__assert_func) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-callocr.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) (_calloc_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mbtowc_r.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) (__ascii_mbtowc) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reallocr.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-svfprintf.o) (_realloc_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wctomb_r.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) (__ascii_wctomb) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-ctype_.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) (_ctype_) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fprintf.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-assert.o) (fiprintf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-makebuf.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wsetup.o) (__smakebuf_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fstatr.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-makebuf.o) (_fstat_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-isattyr.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-makebuf.o) (_isatty_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-abort.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-assert.o) (abort) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-msizer.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reallocr.o) (_malloc_usable_size_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-abort.o) (raise) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signalr.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) (_kill_r) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_asin.o) + ./Core/Src/FusionAhrs.o (asinf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_atan2.o) + ./Core/Src/FusionAhrs.o (atan2f) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_pow.o) + ./Core/Src/FusionAhrs.o (powf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_sqrt.o) + ./Core/Src/FusionAhrs.o (sqrtf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_cos.o) + ./Core/Src/FusionAhrs.o (cosf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_fabs.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_asin.o) (fabsf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_sin.o) + ./Core/Src/FusionAhrs.o (sinf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_finite.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_pow.o) (finitef) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_nan.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_asin.o) (nanf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_sqrt.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_sqrt.o) (__ieee754_sqrtf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_cos.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_cos.o) (__kernel_cosf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_sin.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_cos.o) (__kernel_sinf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_asin.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_asin.o) (__ieee754_asinf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_atan2.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_atan2.o) (__ieee754_atan2f) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_pow.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_pow.o) (__ieee754_powf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_rem_pio2.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_cos.o) (__ieee754_rem_pio2f) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_atan.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_atan2.o) (atanf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_scalbn.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_pow.o) (scalbnf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-math_errf.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_pow.o) (__math_uflowf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_rem_pio2.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_rem_pio2.o) (__kernel_rem_pio2f) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_floor.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_rem_pio2.o) (floorf) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_muldf3.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) (__aeabi_dmul) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_addsubdf3.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) (__aeabi_dsub) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_muldivdf3.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) (__aeabi_ddiv) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_cmpdf2.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) (__aeabi_dcmpeq) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_unorddf2.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) (__aeabi_dcmpun) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_fixdfsi.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) (__aeabi_d2iz) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_aeabi_uldivmod.o) + ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o (__aeabi_uldivmod) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_udivmoddi4.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_aeabi_uldivmod.o) (__udivmoddi4) +C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_dvmd_tls.o) + C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_aeabi_uldivmod.o) (__aeabi_ldiv0) + +Discarded input sections + + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crti.o + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crti.o + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crti.o + .data 0x00000000 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtbegin.o + .rodata 0x00000000 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtbegin.o + .text 0x00000000 0x7c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard/crt0.o + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard/crt0.o + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard/crt0.o + .ARM.extab 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard/crt0.o + .ARM.exidx 0x00000000 0x10 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard/crt0.o + .ARM.attributes + 0x00000000 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard/crt0.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/FusionAhrs.o + .text 0x00000000 0x0 ./Core/Src/FusionAhrs.o + .data 0x00000000 0x0 ./Core/Src/FusionAhrs.o + .bss 0x00000000 0x0 ./Core/Src/FusionAhrs.o + .text.FusionVectorSubtract + 0x00000000 0x9c ./Core/Src/FusionAhrs.o + .text.FusionQuaternionMultiply + 0x00000000 0x184 ./Core/Src/FusionAhrs.o + .text.FusionAhrsUpdateNoMagnetometer + 0x00000000 0xb4 ./Core/Src/FusionAhrs.o + .text.FusionAhrsUpdateExternalHeading + 0x00000000 0x14a ./Core/Src/FusionAhrs.o + .text.FusionAhrsSetQuaternion + 0x00000000 0x40 ./Core/Src/FusionAhrs.o + .text.FusionAhrsGetGravity + 0x00000000 0xca ./Core/Src/FusionAhrs.o + .text.FusionAhrsGetLinearAcceleration + 0x00000000 0x12e ./Core/Src/FusionAhrs.o + .text.FusionAhrsGetEarthAcceleration + 0x00000000 0x234 ./Core/Src/FusionAhrs.o + .text.FusionAhrsSetHeading + 0x00000000 0x12c ./Core/Src/FusionAhrs.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/icm20948.o + .text 0x00000000 0x0 ./Core/Src/icm20948.o + .data 0x00000000 0x0 ./Core/Src/icm20948.o + .bss 0x00000000 0x0 ./Core/Src/icm20948.o + .text.read_register + 0x00000000 0x38 ./Core/Src/icm20948.o + .text.icm20948_mag_init + 0x00000000 0x1c ./Core/Src/icm20948.o + .debug_macro 0x00000000 0xad8 ./Core/Src/icm20948.o + .debug_macro 0x00000000 0x22 ./Core/Src/icm20948.o + .debug_macro 0x00000000 0x103 ./Core/Src/icm20948.o + .debug_macro 0x00000000 0x6a ./Core/Src/icm20948.o + .debug_macro 0x00000000 0x1df ./Core/Src/icm20948.o + .debug_macro 0x00000000 0x190 ./Core/Src/icm20948.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/lcd_i2c.o + .text 0x00000000 0x0 ./Core/Src/lcd_i2c.o + .data 0x00000000 0x0 ./Core/Src/lcd_i2c.o + .bss 0x00000000 0x0 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0xad8 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x1a7 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x2e ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x28 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x22 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x8e ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x51 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x103 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x6a ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x1df ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x1c ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x22 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0xfb ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x1011 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x11f ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x16336 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x6d ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x38fb ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x190 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x5c ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x13fa ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x646 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x1b9 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x168 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x26b ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x23d ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x241 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x375 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0xd6 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x22c ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x61 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0xa5 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x122 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x364 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x5cf ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x44 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x2eb ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x2a ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x43 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x34 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x370 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x16 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x4a ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x34 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x10 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x58 ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x8e ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x1c ./Core/Src/lcd_i2c.o + .debug_macro 0x00000000 0x185 ./Core/Src/lcd_i2c.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/main.o + .text 0x00000000 0x0 ./Core/Src/main.o + .data 0x00000000 0x0 ./Core/Src/main.o + .bss 0x00000000 0x0 ./Core/Src/main.o + .debug_macro 0x00000000 0xad8 ./Core/Src/main.o + .debug_macro 0x00000000 0x22 ./Core/Src/main.o + .debug_macro 0x00000000 0x5b ./Core/Src/main.o + .debug_macro 0x00000000 0x2a ./Core/Src/main.o + .debug_macro 0x00000000 0x94 ./Core/Src/main.o + .debug_macro 0x00000000 0x43 ./Core/Src/main.o + .debug_macro 0x00000000 0x34 ./Core/Src/main.o + .debug_macro 0x00000000 0x57 ./Core/Src/main.o + .debug_macro 0x00000000 0x370 ./Core/Src/main.o + .debug_macro 0x00000000 0x16 ./Core/Src/main.o + .debug_macro 0x00000000 0x4a ./Core/Src/main.o + .debug_macro 0x00000000 0x34 ./Core/Src/main.o + .debug_macro 0x00000000 0x10 ./Core/Src/main.o + .debug_macro 0x00000000 0x58 ./Core/Src/main.o + .debug_macro 0x00000000 0x8e ./Core/Src/main.o + .debug_macro 0x00000000 0x1c ./Core/Src/main.o + .debug_macro 0x00000000 0x185 ./Core/Src/main.o + .debug_macro 0x00000000 0x1a7 ./Core/Src/main.o + .debug_macro 0x00000000 0x2e ./Core/Src/main.o + .debug_macro 0x00000000 0x28 ./Core/Src/main.o + .debug_macro 0x00000000 0x103 ./Core/Src/main.o + .debug_macro 0x00000000 0x6a ./Core/Src/main.o + .debug_macro 0x00000000 0x1df ./Core/Src/main.o + .debug_macro 0x00000000 0x1c ./Core/Src/main.o + .debug_macro 0x00000000 0x22 ./Core/Src/main.o + .debug_macro 0x00000000 0xfb ./Core/Src/main.o + .debug_macro 0x00000000 0x1011 ./Core/Src/main.o + .debug_macro 0x00000000 0x11f ./Core/Src/main.o + .debug_macro 0x00000000 0x16336 ./Core/Src/main.o + .debug_macro 0x00000000 0x6d ./Core/Src/main.o + .debug_macro 0x00000000 0x38fb ./Core/Src/main.o + .debug_macro 0x00000000 0x13fa ./Core/Src/main.o + .debug_macro 0x00000000 0x646 ./Core/Src/main.o + .debug_macro 0x00000000 0x1b9 ./Core/Src/main.o + .debug_macro 0x00000000 0x168 ./Core/Src/main.o + .debug_macro 0x00000000 0x26b ./Core/Src/main.o + .debug_macro 0x00000000 0x23d ./Core/Src/main.o + .debug_macro 0x00000000 0x241 ./Core/Src/main.o + .debug_macro 0x00000000 0x375 ./Core/Src/main.o + .debug_macro 0x00000000 0xd6 ./Core/Src/main.o + .debug_macro 0x00000000 0x22c ./Core/Src/main.o + .debug_macro 0x00000000 0x61 ./Core/Src/main.o + .debug_macro 0x00000000 0xa5 ./Core/Src/main.o + .debug_macro 0x00000000 0x122 ./Core/Src/main.o + .debug_macro 0x00000000 0x364 ./Core/Src/main.o + .debug_macro 0x00000000 0x5cf ./Core/Src/main.o + .debug_macro 0x00000000 0x44 ./Core/Src/main.o + .debug_macro 0x00000000 0x2eb ./Core/Src/main.o + .debug_macro 0x00000000 0x22 ./Core/Src/main.o + .debug_macro 0x00000000 0x9a ./Core/Src/main.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/moto_config.o + .text 0x00000000 0x0 ./Core/Src/moto_config.o + .data 0x00000000 0x0 ./Core/Src/moto_config.o + .bss 0x00000000 0x0 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0xad8 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x22 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x22 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x8e ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x51 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x103 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x6a ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x1df ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x61 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x2a ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x43 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x34 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x190 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x370 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x16 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x4a ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x34 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x10 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x58 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x8e ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x1c ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x185 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x19b ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x3c ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x20 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x10 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x16 ./Core/Src/moto_config.o + .debug_macro 0x00000000 0x146 ./Core/Src/moto_config.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_hal_msp.o + .text 0x00000000 0x0 ./Core/Src/stm32l4xx_hal_msp.o + .data 0x00000000 0x0 ./Core/Src/stm32l4xx_hal_msp.o + .bss 0x00000000 0x0 ./Core/Src/stm32l4xx_hal_msp.o + .text.HAL_I2C_MspDeInit + 0x00000000 0x48 ./Core/Src/stm32l4xx_hal_msp.o + .text.HAL_UART_MspDeInit + 0x00000000 0x38 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0xad8 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x1a7 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x2e ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x28 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x22 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x8e ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x51 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x103 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x6a ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x1df ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x1c ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x22 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0xfb ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x1011 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x11f ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x16336 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x6d ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x38fb ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x190 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x5c ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x13fa ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x646 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x1b9 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x168 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x26b ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x23d ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x241 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x375 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0xd6 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x22c ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x61 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0xa5 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x122 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x364 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x5cf ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x44 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x2eb ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00000000 0x94 ./Core/Src/stm32l4xx_hal_msp.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/stm32l4xx_it.o + .text 0x00000000 0x0 ./Core/Src/stm32l4xx_it.o + .data 0x00000000 0x0 ./Core/Src/stm32l4xx_it.o + .bss 0x00000000 0x0 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0xad8 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x1a7 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x2e ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x28 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x22 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x8e ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x51 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x103 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x6a ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x1df ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x1c ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x22 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0xfb ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x1011 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x11f ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x16336 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x6d ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x38fb ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x190 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x5c ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x13fa ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x646 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x1b9 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x168 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x26b ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x23d ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x241 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x375 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0xd6 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x22c ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x61 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0xa5 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x122 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x364 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x5cf ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x44 ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x2eb ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00000000 0x94 ./Core/Src/stm32l4xx_it.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/syscalls.o + .text 0x00000000 0x0 ./Core/Src/syscalls.o + .data 0x00000000 0x0 ./Core/Src/syscalls.o + .bss 0x00000000 0x0 ./Core/Src/syscalls.o + .bss.__env 0x00000000 0x4 ./Core/Src/syscalls.o + .data.environ 0x00000000 0x4 ./Core/Src/syscalls.o + .text.initialise_monitor_handles + 0x00000000 0xe ./Core/Src/syscalls.o + .text._open 0x00000000 0x1c ./Core/Src/syscalls.o + .text._wait 0x00000000 0x1e ./Core/Src/syscalls.o + .text._unlink 0x00000000 0x1e ./Core/Src/syscalls.o + .text._times 0x00000000 0x18 ./Core/Src/syscalls.o + .text._stat 0x00000000 0x20 ./Core/Src/syscalls.o + .text._link 0x00000000 0x20 ./Core/Src/syscalls.o + .text._fork 0x00000000 0x16 ./Core/Src/syscalls.o + .text._execve 0x00000000 0x22 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0xad8 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x22 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x5b ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x2a ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x94 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x43 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x34 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x57 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x190 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x370 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x16 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x4a ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x34 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x10 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x58 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x8e ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x1c ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x185 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x3c ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x6a ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x1c ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x10 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x16 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x146 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x103 ./Core/Src/syscalls.o + .debug_macro 0x00000000 0x1df ./Core/Src/syscalls.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/sysmem.o + .text 0x00000000 0x0 ./Core/Src/sysmem.o + .data 0x00000000 0x0 ./Core/Src/sysmem.o + .bss 0x00000000 0x0 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0xad8 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x10 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x22 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x5b ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x2a ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x94 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x43 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x34 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x190 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x57 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x370 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x16 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x4a ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x34 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x10 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x58 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x8e ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x1c ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x185 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x103 ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x6a ./Core/Src/sysmem.o + .debug_macro 0x00000000 0x1df ./Core/Src/sysmem.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .group 0x00000000 0xc ./Core/Src/system_stm32l4xx.o + .text 0x00000000 0x0 ./Core/Src/system_stm32l4xx.o + .data 0x00000000 0x0 ./Core/Src/system_stm32l4xx.o + .bss 0x00000000 0x0 ./Core/Src/system_stm32l4xx.o + .text.SystemCoreClockUpdate + 0x00000000 0x15c ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0xad8 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x2e ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x28 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x22 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x8e ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x51 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x103 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x6a ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x1df ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x1c ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x22 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0xfb ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x1011 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x11f ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x16336 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x6d ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x1a7 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x38fb ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x190 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x5c ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x13fa ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x646 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x1b9 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x168 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x26b ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x23d ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x241 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x375 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0xd6 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x22c ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x61 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0xa5 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x122 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x364 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x5cf ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x44 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00000000 0x2eb ./Core/Src/system_stm32l4xx.o + .text 0x00000000 0x14 ./Core/Startup/startup_stm32l452retxp.o + .data 0x00000000 0x0 ./Core/Startup/startup_stm32l452retxp.o + .bss 0x00000000 0x0 ./Core/Startup/startup_stm32l452retxp.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_DeInit + 0x00000000 0x68 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_MspInit + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_MspDeInit + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_GetTickPrio + 0x00000000 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_SetTickFreq + 0x00000000 0x50 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_GetTickFreq + 0x00000000 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_SuspendTick + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_ResumeTick + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_GetHalVersion + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_GetREVID + 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_GetDEVID + 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_GetUIDw0 + 0x00000000 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_GetUIDw1 + 0x00000000 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_GetUIDw2 + 0x00000000 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_DBGMCU_EnableDBGSleepMode + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_DBGMCU_DisableDBGSleepMode + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_DBGMCU_EnableDBGStopMode + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_DBGMCU_DisableDBGStopMode + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_DBGMCU_EnableDBGStandbyMode + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_DBGMCU_DisableDBGStandbyMode + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_SYSCFG_SRAM2Erase + 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_SYSCFG_EnableMemorySwappingBank + 0x00000000 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_SYSCFG_DisableMemorySwappingBank + 0x00000000 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_SYSCFG_VREFBUF_VoltageScalingConfig + 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_SYSCFG_VREFBUF_HighImpedanceConfig + 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_SYSCFG_VREFBUF_TrimmingConfig + 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_SYSCFG_EnableVREFBUF + 0x00000000 0x48 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_SYSCFG_DisableVREFBUF + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_SYSCFG_EnableIOAnalogSwitchBooster + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .text.HAL_SYSCFG_DisableIOAnalogSwitchBooster + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.__NVIC_EnableIRQ + 0x00000000 0x3c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.__NVIC_DisableIRQ + 0x00000000 0x48 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.__NVIC_GetPendingIRQ + 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.__NVIC_SetPendingIRQ + 0x00000000 0x3c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.__NVIC_ClearPendingIRQ + 0x00000000 0x3c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.__NVIC_GetActive + 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.__NVIC_GetPriority + 0x00000000 0x50 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.NVIC_DecodePriority + 0x00000000 0x6e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.__NVIC_SystemReset + 0x00000000 0x2c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_NVIC_EnableIRQ + 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_NVIC_DisableIRQ + 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_NVIC_SystemReset + 0x00000000 0x8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_NVIC_GetPriorityGrouping + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_NVIC_GetPriority + 0x00000000 0x2c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_NVIC_SetPendingIRQ + 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_NVIC_GetPendingIRQ + 0x00000000 0x1e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_NVIC_ClearPendingIRQ + 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_NVIC_GetActive + 0x00000000 0x1e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_SYSTICK_CLKSourceConfig + 0x00000000 0x38 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_SYSTICK_IRQHandler + 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_SYSTICK_Callback + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_MPU_Enable + 0x00000000 0x30 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_MPU_Disable + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_MPU_EnableRegion + 0x00000000 0x2c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_MPU_DisableRegion + 0x00000000 0x2c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_MPU_ConfigRegion + 0x00000000 0x80 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text.HAL_DMA_Init + 0x00000000 0x170 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text.HAL_DMA_DeInit + 0x00000000 0x124 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text.HAL_DMA_Start + 0x00000000 0x86 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text.HAL_DMA_Start_IT + 0x00000000 0xc0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text.HAL_DMA_Abort + 0x00000000 0x7c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text.HAL_DMA_Abort_IT + 0x00000000 0x82 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text.HAL_DMA_PollForTransfer + 0x00000000 0x14e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text.HAL_DMA_IRQHandler + 0x00000000 0x15e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text.HAL_DMA_RegisterCallback + 0x00000000 0x90 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text.HAL_DMA_UnRegisterCallback + 0x00000000 0xb0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text.HAL_DMA_GetState + 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text.HAL_DMA_GetError + 0x00000000 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .text.DMA_SetConfig + 0x00000000 0x60 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_info 0x00000000 0x6f4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_abbrev 0x00000000 0x1e4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_aranges + 0x00000000 0x80 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_rnglists + 0x00000000 0x64 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x1c5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_line 0x00000000 0xd27 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_str 0x00000000 0xc8b3c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .comment 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .debug_frame 0x00000000 0x204 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .ARM.attributes + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_info 0x00000000 0x70 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_abbrev 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_aranges + 0x00000000 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x1c5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_line 0x00000000 0x740 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .debug_str 0x00000000 0xc86ac ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .comment 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .ARM.attributes + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .text.HAL_EXTI_SetConfigLine + 0x00000000 0x1a0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .text.HAL_EXTI_GetConfigLine + 0x00000000 0x144 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .text.HAL_EXTI_ClearConfigLine + 0x00000000 0x110 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .text.HAL_EXTI_RegisterCallback + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .text.HAL_EXTI_GetHandle + 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .text.HAL_EXTI_IRQHandler + 0x00000000 0x60 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .text.HAL_EXTI_GetPending + 0x00000000 0x58 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .text.HAL_EXTI_ClearPending + 0x00000000 0x48 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .text.HAL_EXTI_GenerateSWI + 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_info 0x00000000 0x649 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_abbrev 0x00000000 0x1a8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_aranges + 0x00000000 0x60 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_rnglists + 0x00000000 0x46 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x1d1 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_line 0x00000000 0xabd ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_str 0x00000000 0xc898b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .comment 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .debug_frame 0x00000000 0x174 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .ARM.attributes + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .data.pFlash 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.HAL_FLASH_Program + 0x00000000 0xd8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.HAL_FLASH_Program_IT + 0x00000000 0xb0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.HAL_FLASH_IRQHandler + 0x00000000 0x1a4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.HAL_FLASH_EndOfOperationCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.HAL_FLASH_OperationErrorCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.HAL_FLASH_Unlock + 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.HAL_FLASH_Lock + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.HAL_FLASH_OB_Unlock + 0x00000000 0x38 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.HAL_FLASH_OB_Lock + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.HAL_FLASH_OB_Launch + 0x00000000 0x24 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.HAL_FLASH_GetError + 0x00000000 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.FLASH_WaitForLastOperation + 0x00000000 0xac ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.FLASH_Program_DoubleWord + 0x00000000 0x4c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .text.FLASH_Program_Fast + 0x00000000 0x6c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_info 0x00000000 0x661 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_abbrev 0x00000000 0x312 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_aranges + 0x00000000 0x88 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_rnglists + 0x00000000 0x65 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x1cb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_line 0x00000000 0xacd ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_str 0x00000000 0xc8b54 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .comment 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .debug_frame 0x00000000 0x204 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .ARM.attributes + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.HAL_FLASHEx_Erase + 0x00000000 0x134 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.HAL_FLASHEx_Erase_IT + 0x00000000 0xe4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBProgram + 0x00000000 0xdc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.HAL_FLASHEx_OBGetConfig + 0x00000000 0x84 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.FLASH_MassErase + 0x00000000 0x3c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.FLASH_PageErase + 0x00000000 0x48 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.FLASH_FlushCaches + 0x00000000 0x94 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.FLASH_OB_WRPConfig + 0x00000000 0x8c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.FLASH_OB_RDPConfig + 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.FLASH_OB_UserConfig + 0x00000000 0x1f0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.FLASH_OB_PCROPConfig + 0x00000000 0xa8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.FLASH_OB_GetWRP + 0x00000000 0x58 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.FLASH_OB_GetRDP + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.FLASH_OB_GetUser + 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .text.FLASH_OB_GetPCROP + 0x00000000 0x6c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_info 0x00000000 0x744 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_abbrev 0x00000000 0x22d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_aranges + 0x00000000 0x90 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_rnglists + 0x00000000 0x6f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x1c5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_line 0x00000000 0xc33 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_str 0x00000000 0xc8b74 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .comment 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .debug_frame 0x00000000 0x248 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .ARM.attributes + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .RamFunc 0x00000000 0x68 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_info 0x00000000 0x1a2 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_abbrev 0x00000000 0xbf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_aranges + 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_rnglists + 0x00000000 0x19 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x1c5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_line 0x00000000 0x76c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_str 0x00000000 0xc8794 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .comment 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .debug_frame 0x00000000 0x50 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .ARM.attributes + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .text.HAL_GPIO_DeInit + 0x00000000 0x1b4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .text.HAL_GPIO_ReadPin + 0x00000000 0x30 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .text.HAL_GPIO_TogglePin + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .text.HAL_GPIO_LockPin + 0x00000000 0x50 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .text.HAL_GPIO_EXTI_IRQHandler + 0x00000000 0x30 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .text.HAL_GPIO_EXTI_Callback + 0x00000000 0x16 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_DeInit + 0x00000000 0x5e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_MspInit + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_MspDeInit + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Master_Receive + 0x00000000 0x1ec ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Slave_Transmit + 0x00000000 0x29a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Slave_Receive + 0x00000000 0x220 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Master_Transmit_IT + 0x00000000 0x130 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Master_Receive_IT + 0x00000000 0xe0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Slave_Transmit_IT + 0x00000000 0xdc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Slave_Receive_IT + 0x00000000 0xa0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Master_Transmit_DMA + 0x00000000 0x228 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Master_Receive_DMA + 0x00000000 0x1e0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Slave_Transmit_DMA + 0x00000000 0x1d8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Slave_Receive_DMA + 0x00000000 0x16c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Mem_Write_IT + 0x00000000 0x114 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Mem_Read_IT + 0x00000000 0x10c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Mem_Write_DMA + 0x00000000 0x1cc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Mem_Read_DMA + 0x00000000 0x1cc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_IsDeviceReady + 0x00000000 0x1d8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Master_Seq_Transmit_IT + 0x00000000 0x17c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Master_Seq_Transmit_DMA + 0x00000000 0x2a0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Master_Seq_Receive_IT + 0x00000000 0x108 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Master_Seq_Receive_DMA + 0x00000000 0x208 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Slave_Seq_Transmit_IT + 0x00000000 0x164 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Slave_Seq_Transmit_DMA + 0x00000000 0x28c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Slave_Seq_Receive_IT + 0x00000000 0x164 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Slave_Seq_Receive_DMA + 0x00000000 0x28c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_EnableListen_IT + 0x00000000 0x40 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_DisableListen_IT + 0x00000000 0x62 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_Master_Abort_IT + 0x00000000 0xa8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_EV_IRQHandler + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_ER_IRQHandler + 0x00000000 0xc2 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_MasterTxCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_MasterRxCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_SlaveTxCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_SlaveRxCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_AddrCallback + 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_ListenCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_MemTxCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_MemRxCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_ErrorCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_AbortCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_GetState + 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_GetMode + 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2C_GetError + 0x00000000 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_Master_ISR_IT + 0x00000000 0x284 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_Mem_ISR_IT + 0x00000000 0x2a0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_Slave_ISR_IT + 0x00000000 0x208 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_Master_ISR_DMA + 0x00000000 0x204 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_Mem_ISR_DMA + 0x00000000 0x29c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_Slave_ISR_DMA + 0x00000000 0x1c2 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_ITAddrCplt + 0x00000000 0x108 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_ITMasterSeqCplt + 0x00000000 0x7a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_ITSlaveSeqCplt + 0x00000000 0xbc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_ITMasterCplt + 0x00000000 0x194 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_ITSlaveCplt + 0x00000000 0x2d4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_ITListenCplt + 0x00000000 0xac ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_ITError + 0x00000000 0x1e0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_TreatErrorCallback + 0x00000000 0x4e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_DMAMasterTransmitCplt + 0x00000000 0x96 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_DMASlaveTransmitCplt + 0x00000000 0x40 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_DMAMasterReceiveCplt + 0x00000000 0xb2 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_DMASlaveReceiveCplt + 0x00000000 0x46 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_DMAError + 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_DMAAbort + 0x00000000 0x3c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_WaitOnRXNEFlagUntilTimeout + 0x00000000 0x118 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_Enable_IRQ + 0x00000000 0x108 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_Disable_IRQ + 0x00000000 0xbc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_ConvertOtherXferOptions + 0x00000000 0x36 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .text.HAL_I2CEx_EnableWakeUp + 0x00000000 0x84 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .text.HAL_I2CEx_DisableWakeUp + 0x00000000 0x84 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .text.HAL_I2CEx_EnableFastModePlus + 0x00000000 0x40 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .text.HAL_I2CEx_DisableFastModePlus + 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_DeInit + 0x00000000 0x2c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_EnableBkUpAccess + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_DisableBkUpAccess + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_ConfigPVD + 0x00000000 0xc0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_EnablePVD + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_DisablePVD + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_EnableWakeUpPin + 0x00000000 0x40 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_DisableWakeUpPin + 0x00000000 0x2c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_EnterSLEEPMode + 0x00000000 0x68 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_EnterSTOPMode + 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_EnterSTANDBYMode + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_EnableSleepOnExit + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_DisableSleepOnExit + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_EnableSEVOnPend + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_DisableSEVOnPend + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .text.HAL_PWR_PVDCallback + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_info 0x00000000 0x93a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_abbrev 0x00000000 0x1d4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_aranges + 0x00000000 0x98 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_rnglists + 0x00000000 0x6e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x1dd ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_line 0x00000000 0x918 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_str 0x00000000 0xc8c26 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .comment 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .debug_frame 0x00000000 0x230 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .ARM.attributes + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnableBatteryCharging + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_DisableBatteryCharging + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnableVddUSB + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_DisableVddUSB + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnableInternalWakeUpLine + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_DisableInternalWakeUpLine + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnableGPIOPullUp + 0x00000000 0x110 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_DisableGPIOPullUp + 0x00000000 0xbc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnableGPIOPullDown + 0x00000000 0x110 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_DisableGPIOPullDown + 0x00000000 0xc0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnablePullUpPullDownConfig + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_DisablePullUpPullDownConfig + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnableSRAM2ContentRetention + 0x00000000 0x10 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_DisableSRAM2ContentRetention + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_SetSRAM2ContentRetention + 0x00000000 0x48 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnablePVM1 + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_DisablePVM1 + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnablePVM3 + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_DisablePVM3 + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnablePVM4 + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_DisablePVM4 + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_ConfigPVM + 0x00000000 0x200 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnableLowPowerRunMode + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_DisableLowPowerRunMode + 0x00000000 0x70 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnterSTOP0Mode + 0x00000000 0x54 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnterSTOP1Mode + 0x00000000 0x58 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnterSTOP2Mode + 0x00000000 0x58 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_EnterSHUTDOWNMode + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_PVD_PVM_IRQHandler + 0x00000000 0x68 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_PVM1Callback + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_PVM3Callback + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .text.HAL_PWREx_PVM4Callback + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .text.HAL_RCC_DeInit + 0x00000000 0x130 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .text.HAL_RCC_MCOConfig + 0x00000000 0x68 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .text.HAL_RCC_GetOscConfig + 0x00000000 0x194 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .text.HAL_RCC_GetClockConfig + 0x00000000 0x64 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .text.HAL_RCC_EnableCSS + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .text.HAL_RCC_NMI_IRQHandler + 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .text.HAL_RCC_CSSCallback + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .text.HAL_RCC_GetResetSource + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_GetPeriphCLKConfig + 0x00000000 0x180 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_GetPeriphCLKFreq + 0x00000000 0xa04 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_EnablePLLSAI1 + 0x00000000 0xd0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_DisablePLLSAI1 + 0x00000000 0x74 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_WakeUpStopCLKConfig + 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_StandbyMSIRangeConfig + 0x00000000 0x30 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_EnableLSECSS + 0x00000000 0x24 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_DisableLSECSS + 0x00000000 0x30 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_EnableLSECSS_IT + 0x00000000 0x4c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_LSECSS_IRQHandler + 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_LSECSS_Callback + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_EnableLSCO + 0x00000000 0xd4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_DisableLSCO + 0x00000000 0x88 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_EnableMSIPLLMode + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_DisableMSIPLLMode + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_CRSConfig + 0x00000000 0x84 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_CRSSoftwareSynchronizationGenerate + 0x00000000 0x20 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_CRSGetSynchronizationInfo + 0x00000000 0x48 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_CRSWaitSynchronization + 0x00000000 0xe4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_CRS_IRQHandler + 0x00000000 0xdc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_CRS_SyncOkCallback + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_CRS_SyncWarnCallback + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_CRS_ExpectedSyncCallback + 0x00000000 0xe ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_RCCEx_CRS_ErrorCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.RCCEx_GetSAIxPeriphCLKFreq + 0x00000000 0x178 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_HalfDuplex_Init + 0x00000000 0xac ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_LIN_Init + 0x00000000 0xdc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_MultiProcessor_Init + 0x00000000 0xd4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_DeInit + 0x00000000 0x7a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_MspInit + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_MspDeInit + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_Receive + 0x00000000 0x192 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_Transmit_IT + 0x00000000 0xbc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_Receive_IT + 0x00000000 0x98 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_Transmit_DMA + 0x00000000 0xf8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_Receive_DMA + 0x00000000 0x98 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_DMAPause + 0x00000000 0x11a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_DMAResume + 0x00000000 0x106 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_DMAStop + 0x00000000 0x124 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_Abort + 0x00000000 0x1f6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_AbortTransmit + 0x00000000 0xd0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_AbortReceive + 0x00000000 0x162 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_Abort_IT + 0x00000000 0x250 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_AbortTransmit_IT + 0x00000000 0xf0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_AbortReceive_IT + 0x00000000 0x194 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_IRQHandler + 0x00000000 0x60c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_TxCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_TxHalfCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_RxCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_RxHalfCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_ErrorCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_AbortCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_AbortTransmitCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_AbortReceiveCpltCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UARTEx_RxEventCallback + 0x00000000 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_ReceiverTimeout_Config + 0x00000000 0x38 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_EnableReceiverTimeout + 0x00000000 0x70 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_DisableReceiverTimeout + 0x00000000 0x70 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_MultiProcessor_EnableMuteMode + 0x00000000 0x6c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_MultiProcessor_DisableMuteMode + 0x00000000 0x6c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_MultiProcessor_EnterMuteMode + 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_HalfDuplex_EnableTransmitter + 0x00000000 0xa4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_HalfDuplex_EnableReceiver + 0x00000000 0xa4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_LIN_SendBreak + 0x00000000 0x54 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_GetState + 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.HAL_UART_GetError + 0x00000000 0x1a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_Start_Receive_IT + 0x00000000 0x18c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_Start_Receive_DMA + 0x00000000 0x140 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_EndTxTransfer + 0x00000000 0x4c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_DMATransmitCplt + 0x00000000 0x9a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_DMATxHalfCplt + 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_DMAReceiveCplt + 0x00000000 0x12c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_DMARxHalfCplt + 0x00000000 0x3e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_DMAError + 0x00000000 0x7e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_DMAAbortOnError + 0x00000000 0x2c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_DMATxAbortCallback + 0x00000000 0x6c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_DMARxAbortCallback + 0x00000000 0x80 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_DMATxOnlyAbortCallback + 0x00000000 0x2a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_DMARxOnlyAbortCallback + 0x00000000 0x4e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_TxISR_8BIT + 0x00000000 0xb6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_TxISR_16BIT + 0x00000000 0xc0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_EndTransmit_IT + 0x00000000 0x54 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_RxISR_8BIT + 0x00000000 0x1bc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.UART_RxISR_16BIT + 0x00000000 0x1bc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .group 0x00000000 0xc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .data 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .bss 0x00000000 0x0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text.HAL_RS485Ex_Init + 0x00000000 0xce ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text.HAL_UARTEx_WakeupCallback + 0x00000000 0x14 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text.HAL_UARTEx_EnableClockStopMode + 0x00000000 0x68 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text.HAL_UARTEx_DisableClockStopMode + 0x00000000 0x68 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text.HAL_MultiProcessorEx_AddressLength_Set + 0x00000000 0x5e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text.HAL_UARTEx_StopModeWakeUpSourceConfig + 0x00000000 0xb2 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text.HAL_UARTEx_EnableStopMode + 0x00000000 0x66 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text.HAL_UARTEx_DisableStopMode + 0x00000000 0x66 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text.HAL_UARTEx_ReceiveToIdle + 0x00000000 0x206 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text.HAL_UARTEx_ReceiveToIdle_IT + 0x00000000 0xa0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text.HAL_UARTEx_ReceiveToIdle_DMA + 0x00000000 0xa8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text.HAL_UARTEx_GetRxEventType + 0x00000000 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text.UARTEx_Wakeup_AddressConfig + 0x00000000 0x46 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_info 0x00000000 0xdff ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_abbrev 0x00000000 0x2be ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_aranges + 0x00000000 0x80 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_rnglists + 0x00000000 0x60 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x1c5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0xad8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x1a7 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x2e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x51 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x103 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x6a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x1df ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x22 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0xfb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x1011 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x11f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x16336 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x38fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x190 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x5c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x13fa ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x646 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x1b9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x168 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x26b ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x23d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x241 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x375 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0xd6 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x22c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x61 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0xa5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x122 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x364 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x5cf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_macro 0x00000000 0x2eb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_line 0x00000000 0xbe4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_str 0x00000000 0xc8e56 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .comment 0x00000000 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .debug_frame 0x00000000 0x204 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .ARM.attributes + 0x00000000 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-exit.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-exit.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-exit.o) + .text.exit 0x00000000 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-exit.o) + .debug_frame 0x00000000 0x28 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-exit.o) + .ARM.attributes + 0x00000000 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-exit.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_i.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_i.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_i.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .text.__fp_lock + 0x00000000 0x18 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .text.__fp_unlock + 0x00000000 0x18 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .text.__sfp 0x00000000 0xa4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .text.__fp_lock_all + 0x00000000 0x1c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .text.__fp_unlock_all + 0x00000000 0x1c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fwalk.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fwalk.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fwalk.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-printf.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-printf.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-printf.o) + .text._printf_r + 0x00000000 0x1c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-printf.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-snprintf.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-snprintf.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-snprintf.o) + .text._snprintf_r + 0x00000000 0x64 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-snprintf.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) + .text.__seofread + 0x00000000 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memset.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memset.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memset.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-localeconv.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-localeconv.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-localeconv.o) + .text.__localeconv_l + 0x00000000 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-localeconv.o) + .text.localeconv + 0x00000000 0x8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-localeconv.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-closer.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-closer.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-closer.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reent.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reent.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reent.o) + .text._reclaim_reent + 0x00000000 0xbc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reent.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-impure.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-impure.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-impure.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lseekr.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lseekr.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lseekr.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-readr.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-readr.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-readr.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-writer.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-writer.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-writer.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-errno.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-errno.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-errno.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-init.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-init.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-init.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .text.__retarget_lock_init + 0x00000000 0x2 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .text.__retarget_lock_close + 0x00000000 0x2 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .text.__retarget_lock_close_recursive + 0x00000000 0x2 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .text.__retarget_lock_acquire + 0x00000000 0x2 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .text.__retarget_lock_try_acquire + 0x00000000 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .text.__retarget_lock_try_acquire_recursive + 0x00000000 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .text.__retarget_lock_release + 0x00000000 0x2 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .bss.__lock___arc4random_mutex + 0x00000000 0x1 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .bss.__lock___dd_hash_mutex + 0x00000000 0x1 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .bss.__lock___tz_mutex + 0x00000000 0x1 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .bss.__lock___env_recursive_mutex + 0x00000000 0x1 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .bss.__lock___at_quick_exit_mutex + 0x00000000 0x1 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .bss.__lock___atexit_recursive_mutex + 0x00000000 0x1 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memchr.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memchr.o) + .ARM.extab 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memchr.o) + .eh_frame 0x00000000 0x50 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memchr.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strlen.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strlen.o) + .ARM.extab 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strlen.o) + .eh_frame 0x00000000 0x28 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strlen.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-freer.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-freer.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-freer.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-malloc.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-malloc.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-malloc.o) + .text.free 0x00000000 0x10 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-malloc.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mallocr.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mallocr.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mallocr.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mlock.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mlock.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mlock.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .text.__s2b 0x00000000 0x94 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .text.__ulp 0x00000000 0x4c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .text.__b2d 0x00000000 0x94 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .text.__ratio 0x00000000 0x64 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .text._mprec_log10 + 0x00000000 0x3c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .text.__copybits + 0x00000000 0x46 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .text.__any_on + 0x00000000 0x42 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .rodata.__mprec_tinytens + 0x00000000 0x28 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-svfprintf.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-svfprintf.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-svfprintf.o) + .text.__ssprint_r + 0x00000000 0xfa C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-svfprintf.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) + .text.__sprint_r + 0x00000000 0x1a C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) + .text.vfprintf + 0x00000000 0x14 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fflush.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fflush.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fflush.o) + .text.fflush 0x00000000 0x28 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fflush.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fvwrite.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fvwrite.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fvwrite.o) + .text.__sfvwrite_r + 0x00000000 0x298 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fvwrite.o) + .debug_frame 0x00000000 0x3c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fvwrite.o) + .ARM.attributes + 0x00000000 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fvwrite.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wbuf.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wbuf.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wbuf.o) + .text.__swbuf 0x00000000 0x10 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wbuf.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wsetup.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wsetup.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wsetup.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memmove.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memmove.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memmove.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) + .text._setlocale_r + 0x00000000 0x3c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) + .text.__locale_mb_cur_max + 0x00000000 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) + .text.setlocale + 0x00000000 0x10 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) + .bss._PathLocale + 0x00000000 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-sbrkr.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-sbrkr.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-sbrkr.o) + .text 0x00000000 0x14 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strcmp.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strcmp.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strcmp.o) + .ARM.extab 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strcmp.o) + .ARM.exidx 0x00000000 0x8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strcmp.o) + .debug_frame 0x00000000 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strcmp.o) + .ARM.attributes + 0x00000000 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strcmp.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memcpy-stub.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memcpy-stub.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memcpy-stub.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-assert.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-assert.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-assert.o) + .text.__assert + 0x00000000 0xa C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-assert.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-callocr.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-callocr.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-callocr.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mbtowc_r.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mbtowc_r.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mbtowc_r.o) + .text._mbtowc_r + 0x00000000 0x14 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mbtowc_r.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reallocr.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reallocr.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reallocr.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wctomb_r.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wctomb_r.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wctomb_r.o) + .text._wctomb_r + 0x00000000 0x14 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wctomb_r.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-ctype_.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-ctype_.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-ctype_.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fprintf.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fprintf.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fprintf.o) + .text._fprintf_r + 0x00000000 0x1a C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fprintf.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-makebuf.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-makebuf.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-makebuf.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fstatr.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fstatr.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fstatr.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-isattyr.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-isattyr.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-isattyr.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-abort.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-abort.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-abort.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-msizer.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-msizer.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-msizer.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + .text._init_signal_r + 0x00000000 0x28 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + .text._signal_r + 0x00000000 0x30 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + .text.__sigtramp_r + 0x00000000 0x48 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + .text.signal 0x00000000 0x10 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + .text._init_signal + 0x00000000 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + .text.__sigtramp + 0x00000000 0x10 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signalr.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signalr.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signalr.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_asin.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_asin.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_asin.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_atan2.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_atan2.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_atan2.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_pow.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_pow.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_pow.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_sqrt.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_sqrt.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_sqrt.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_cos.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_cos.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_cos.o) + .text.cosf 0x00000000 0x88 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_cos.o) + .debug_frame 0x00000000 0x38 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_cos.o) + .ARM.attributes + 0x00000000 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_cos.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_fabs.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_fabs.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_fabs.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_sin.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_sin.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_sin.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_finite.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_finite.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_finite.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_nan.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_nan.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_nan.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_sqrt.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_sqrt.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_sqrt.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_cos.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_cos.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_cos.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_sin.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_sin.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_sin.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_asin.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_asin.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_asin.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_atan2.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_atan2.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_atan2.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_pow.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_pow.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_pow.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_rem_pio2.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_rem_pio2.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_rem_pio2.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_atan.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_atan.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_atan.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_scalbn.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_scalbn.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_scalbn.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-math_errf.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-math_errf.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-math_errf.o) + .text.__math_divzerof + 0x00000000 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-math_errf.o) + .text.__math_invalidf + 0x00000000 0x1e C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-math_errf.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_rem_pio2.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_rem_pio2.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_rem_pio2.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_floor.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_floor.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_floor.o) + .text 0x00000000 0x254 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_muldf3.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_muldf3.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_muldf3.o) + .debug_frame 0x00000000 0x30 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_muldf3.o) + .ARM.attributes + 0x00000000 0x22 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_muldf3.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_addsubdf3.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_addsubdf3.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_muldivdf3.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_muldivdf3.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_cmpdf2.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_cmpdf2.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_unorddf2.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_unorddf2.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_fixdfsi.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_fixdfsi.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_aeabi_uldivmod.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_aeabi_uldivmod.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_udivmoddi4.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_udivmoddi4.o) + .ARM.extab 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_udivmoddi4.o) + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_dvmd_tls.o) + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_dvmd_tls.o) + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtend.o + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtend.o + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtend.o + .rodata 0x00000000 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtend.o + .eh_frame 0x00000000 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtend.o + .ARM.attributes + 0x00000000 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtend.o + .text 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtn.o + .data 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtn.o + .bss 0x00000000 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtn.o + +Memory Configuration + +Name Origin Length Attributes +RAM 0x20000000 0x00020000 xrw +RAM2 0x10000000 0x00008000 xrw +FLASH 0x08000000 0x00080000 xr +*default* 0x00000000 0xffffffff + +Linker script and memory map + +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crti.o +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtbegin.o +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard/crt0.o +LOAD ./Core/Src/FusionAhrs.o +LOAD ./Core/Src/icm20948.o +LOAD ./Core/Src/lcd_i2c.o +LOAD ./Core/Src/main.o +LOAD ./Core/Src/moto_config.o +LOAD ./Core/Src/stm32l4xx_hal_msp.o +LOAD ./Core/Src/stm32l4xx_it.o +LOAD ./Core/Src/syscalls.o +LOAD ./Core/Src/sysmem.o +LOAD ./Core/Src/system_stm32l4xx.o +LOAD ./Core/Startup/startup_stm32l452retxp.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o +LOAD ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o +START GROUP +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a +END GROUP +START GROUP +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a +END GROUP +START GROUP +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libnosys.a +END GROUP +START GROUP +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libnosys.a +END GROUP +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtend.o +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtn.o + 0x20020000 _estack = (ORIGIN (RAM) + LENGTH (RAM)) + 0x00000400 _Min_Heap_Size = 0x400 + 0x00000800 _Min_Stack_Size = 0x800 + +.isr_vector 0x08000000 0x194 + 0x08000000 . = ALIGN (0x4) + *(.isr_vector) + .isr_vector 0x08000000 0x194 ./Core/Startup/startup_stm32l452retxp.o + 0x08000000 g_pfnVectors + 0x08000194 . = ALIGN (0x4) + +.text 0x080001a0 0xb58c + 0x080001a0 . = ALIGN (0x4) + *(.text) + .text 0x080001a0 0x40 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtbegin.o + .text 0x080001e0 0xa0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memchr.o) + 0x080001e0 memchr + .text 0x08000280 0x10 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strlen.o) + 0x08000280 strlen + .text 0x08000290 0x378 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_addsubdf3.o) + 0x08000290 __aeabi_drsub + 0x08000298 __aeabi_dsub + 0x08000298 __subdf3 + 0x0800029c __aeabi_dadd + 0x0800029c __adddf3 + 0x08000514 __floatunsidf + 0x08000514 __aeabi_ui2d + 0x08000534 __floatsidf + 0x08000534 __aeabi_i2d + 0x08000558 __aeabi_f2d + 0x08000558 __extendsfdf2 + 0x0800059c __floatundidf + 0x0800059c __aeabi_ul2d + 0x080005ac __floatdidf + 0x080005ac __aeabi_l2d + .text 0x08000608 0x424 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_muldivdf3.o) + 0x08000608 __aeabi_dmul + 0x08000608 __muldf3 + 0x0800085c __divdf3 + 0x0800085c __aeabi_ddiv + .text 0x08000a2c 0x110 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_cmpdf2.o) + 0x08000a2c __gtdf2 + 0x08000a2c __gedf2 + 0x08000a34 __ltdf2 + 0x08000a34 __ledf2 + 0x08000a3c __nedf2 + 0x08000a3c __eqdf2 + 0x08000a3c __cmpdf2 + 0x08000ab8 __aeabi_cdrcmple + 0x08000ac8 __aeabi_cdcmpeq + 0x08000ac8 __aeabi_cdcmple + 0x08000ad8 __aeabi_dcmpeq + 0x08000aec __aeabi_dcmplt + 0x08000b00 __aeabi_dcmple + 0x08000b14 __aeabi_dcmpge + 0x08000b28 __aeabi_dcmpgt + .text 0x08000b3c 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_unorddf2.o) + 0x08000b3c __unorddf2 + 0x08000b3c __aeabi_dcmpun + .text 0x08000b68 0x50 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_fixdfsi.o) + 0x08000b68 __aeabi_d2iz + 0x08000b68 __fixdfsi + .text 0x08000bb8 0x30 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_aeabi_uldivmod.o) + 0x08000bb8 __aeabi_uldivmod + .text 0x08000be8 0x2f8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_udivmoddi4.o) + 0x08000be8 __udivmoddi4 + .text 0x08000ee0 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_dvmd_tls.o) + 0x08000ee0 __aeabi_idiv0 + 0x08000ee0 __aeabi_ldiv0 + *(.text*) + .text.FusionDegreesToRadians + 0x08000ee4 0x28 ./Core/Src/FusionAhrs.o + .text.FusionRadiansToDegrees + 0x08000f0c 0x28 ./Core/Src/FusionAhrs.o + .text.FusionAsin + 0x08000f34 0x58 ./Core/Src/FusionAhrs.o + .text.FusionFastInverseSqrt + 0x08000f8c 0x60 ./Core/Src/FusionAhrs.o + .text.FusionVectorIsZero + 0x08000fec 0x60 ./Core/Src/FusionAhrs.o + .text.FusionVectorAdd + 0x0800104c 0x9c ./Core/Src/FusionAhrs.o + .text.FusionVectorSum + 0x080010e8 0x40 ./Core/Src/FusionAhrs.o + .text.FusionVectorMultiplyScalar + 0x08001128 0x88 ./Core/Src/FusionAhrs.o + .text.FusionVectorHadamardProduct + 0x080011b0 0x9c ./Core/Src/FusionAhrs.o + .text.FusionVectorCrossProduct + 0x0800124c 0xcc ./Core/Src/FusionAhrs.o + .text.FusionVectorDotProduct + 0x08001318 0xac ./Core/Src/FusionAhrs.o + .text.FusionVectorMagnitudeSquared + 0x080013c4 0x94 ./Core/Src/FusionAhrs.o + .text.FusionVectorMagnitude + 0x08001458 0x54 ./Core/Src/FusionAhrs.o + .text.FusionVectorNormalise + 0x080014ac 0xa6 ./Core/Src/FusionAhrs.o + .text.FusionQuaternionAdd + 0x08001552 0xc4 ./Core/Src/FusionAhrs.o + .text.FusionQuaternionMultiplyVector + 0x08001616 0x140 ./Core/Src/FusionAhrs.o + .text.FusionQuaternionNormalise + 0x08001756 0xea ./Core/Src/FusionAhrs.o + .text.FusionAhrsInitialise + 0x08001840 0x3c ./Core/Src/FusionAhrs.o + 0x08001840 FusionAhrsInitialise + .text.FusionAhrsReset + 0x0800187c 0xc8 ./Core/Src/FusionAhrs.o + 0x0800187c FusionAhrsReset + .text.FusionAhrsSetSettings + 0x08001944 0x170 ./Core/Src/FusionAhrs.o + 0x08001944 FusionAhrsSetSettings + .text.FusionAhrsUpdate + 0x08001ab4 0x71e ./Core/Src/FusionAhrs.o + 0x08001ab4 FusionAhrsUpdate + .text.HalfGravity + 0x080021d2 0x17a ./Core/Src/FusionAhrs.o + .text.HalfMagnetic + 0x0800234c 0x214 ./Core/Src/FusionAhrs.o + .text.Feedback + 0x08002560 0x16a ./Core/Src/FusionAhrs.o + .text.Clamp 0x080026ca 0x32 ./Core/Src/FusionAhrs.o + .text.FusionAhrsGetQuaternion + 0x080026fc 0x46 ./Core/Src/FusionAhrs.o + 0x080026fc FusionAhrsGetQuaternion + *fill* 0x08002742 0x2 + .text.FusionAhrsGetInternalStates + 0x08002744 0x11c ./Core/Src/FusionAhrs.o + 0x08002744 FusionAhrsGetInternalStates + .text.FusionAhrsGetFlags + 0x08002860 0x6a ./Core/Src/FusionAhrs.o + 0x08002860 FusionAhrsGetFlags + *fill* 0x080028ca 0x2 + .text.write_register + 0x080028cc 0x38 ./Core/Src/icm20948.o + 0x080028cc write_register + .text.icm20948_select_bank + 0x08002904 0x20 ./Core/Src/icm20948.o + 0x08002904 icm20948_select_bank + .text.icm20948_init + 0x08002924 0x38 ./Core/Src/icm20948.o + 0x08002924 icm20948_init + .text.icm20948_read_accel + 0x0800295c 0xb8 ./Core/Src/icm20948.o + 0x0800295c icm20948_read_accel + .text.icm20948_read_gyro + 0x08002a14 0xbc ./Core/Src/icm20948.o + 0x08002a14 icm20948_read_gyro + .text.icm20948_read_mag + 0x08002ad0 0xb8 ./Core/Src/icm20948.o + 0x08002ad0 icm20948_read_mag + .text.lcd_init + 0x08002b88 0x38 ./Core/Src/lcd_i2c.o + 0x08002b88 lcd_init + .text.lcd_clear + 0x08002bc0 0x14 ./Core/Src/lcd_i2c.o + 0x08002bc0 lcd_clear + .text.lcd_set_cursor + 0x08002bd4 0x40 ./Core/Src/lcd_i2c.o + 0x08002bd4 lcd_set_cursor + .text.lcd_print + 0x08002c14 0x2a ./Core/Src/lcd_i2c.o + 0x08002c14 lcd_print + .text.lcd_send_cmd + 0x08002c3e 0x1c ./Core/Src/lcd_i2c.o + 0x08002c3e lcd_send_cmd + .text.lcd_send_data + 0x08002c5a 0x1c ./Core/Src/lcd_i2c.o + 0x08002c5a lcd_send_data + *fill* 0x08002c76 0x2 + .text.lcd_send + 0x08002c78 0x94 ./Core/Src/lcd_i2c.o + 0x08002c78 lcd_send + .text.FusionRadiansToDegrees + 0x08002d0c 0x28 ./Core/Src/main.o + .text.FusionAsin + 0x08002d34 0x58 ./Core/Src/main.o + .text.FusionQuaternionToEuler + 0x08002d8c 0x14c ./Core/Src/main.o + .text.__io_putchar + 0x08002ed8 0x24 ./Core/Src/main.o + 0x08002ed8 __io_putchar + .text.main 0x08002efc 0x4c8 ./Core/Src/main.o + 0x08002efc main + .text.SystemClock_Config + 0x080033c4 0xa2 ./Core/Src/main.o + 0x080033c4 SystemClock_Config + *fill* 0x08003466 0x2 + .text.MX_I2C1_Init + 0x08003468 0x80 ./Core/Src/main.o + .text.MX_USART2_UART_Init + 0x080034e8 0x60 ./Core/Src/main.o + .text.MX_GPIO_Init + 0x08003548 0x114 ./Core/Src/main.o + .text.Error_Handler + 0x0800365c 0xc ./Core/Src/main.o + 0x0800365c Error_Handler + .text.Moto_InitData + 0x08003668 0x2c ./Core/Src/moto_config.o + 0x08003668 Moto_InitData + .text.Moto_UpdateState + 0x08003694 0x120 ./Core/Src/moto_config.o + 0x08003694 Moto_UpdateState + .text.Moto_FilterAngles + 0x080037b4 0x90 ./Core/Src/moto_config.o + 0x080037b4 Moto_FilterAngles + .text.Moto_GetStateString + 0x08003844 0x80 ./Core/Src/moto_config.o + 0x08003844 Moto_GetStateString + .text.Moto_UpdateStats + 0x080038c4 0x142 ./Core/Src/moto_config.o + 0x080038c4 Moto_UpdateStats + .text.Moto_CalibrateMagnetometer + 0x08003a06 0x30 ./Core/Src/moto_config.o + 0x08003a06 Moto_CalibrateMagnetometer + *fill* 0x08003a36 0x2 + .text.Moto_DetectCrash + 0x08003a38 0x58 ./Core/Src/moto_config.o + 0x08003a38 Moto_DetectCrash + .text.Moto_FormatDisplay + 0x08003a90 0x18c ./Core/Src/moto_config.o + 0x08003a90 Moto_FormatDisplay + .text.HAL_MspInit + 0x08003c1c 0x48 ./Core/Src/stm32l4xx_hal_msp.o + 0x08003c1c HAL_MspInit + .text.HAL_I2C_MspInit + 0x08003c64 0xbc ./Core/Src/stm32l4xx_hal_msp.o + 0x08003c64 HAL_I2C_MspInit + .text.HAL_UART_MspInit + 0x08003d20 0xb8 ./Core/Src/stm32l4xx_hal_msp.o + 0x08003d20 HAL_UART_MspInit + .text.NMI_Handler + 0x08003dd8 0x8 ./Core/Src/stm32l4xx_it.o + 0x08003dd8 NMI_Handler + .text.HardFault_Handler + 0x08003de0 0x8 ./Core/Src/stm32l4xx_it.o + 0x08003de0 HardFault_Handler + .text.MemManage_Handler + 0x08003de8 0x8 ./Core/Src/stm32l4xx_it.o + 0x08003de8 MemManage_Handler + .text.BusFault_Handler + 0x08003df0 0x8 ./Core/Src/stm32l4xx_it.o + 0x08003df0 BusFault_Handler + .text.UsageFault_Handler + 0x08003df8 0x8 ./Core/Src/stm32l4xx_it.o + 0x08003df8 UsageFault_Handler + .text.SVC_Handler + 0x08003e00 0xe ./Core/Src/stm32l4xx_it.o + 0x08003e00 SVC_Handler + .text.DebugMon_Handler + 0x08003e0e 0xe ./Core/Src/stm32l4xx_it.o + 0x08003e0e DebugMon_Handler + .text.PendSV_Handler + 0x08003e1c 0xe ./Core/Src/stm32l4xx_it.o + 0x08003e1c PendSV_Handler + .text.SysTick_Handler + 0x08003e2a 0xc ./Core/Src/stm32l4xx_it.o + 0x08003e2a SysTick_Handler + .text._getpid 0x08003e36 0x10 ./Core/Src/syscalls.o + 0x08003e36 _getpid + .text._kill 0x08003e46 0x20 ./Core/Src/syscalls.o + 0x08003e46 _kill + .text._exit 0x08003e66 0x16 ./Core/Src/syscalls.o + 0x08003e66 _exit + .text._read 0x08003e7c 0x3a ./Core/Src/syscalls.o + 0x08003e7c _read + .text._write 0x08003eb6 0x38 ./Core/Src/syscalls.o + 0x08003eb6 _write + .text._close 0x08003eee 0x18 ./Core/Src/syscalls.o + 0x08003eee _close + .text._fstat 0x08003f06 0x20 ./Core/Src/syscalls.o + 0x08003f06 _fstat + .text._isatty 0x08003f26 0x16 ./Core/Src/syscalls.o + 0x08003f26 _isatty + .text._lseek 0x08003f3c 0x1a ./Core/Src/syscalls.o + 0x08003f3c _lseek + *fill* 0x08003f56 0x2 + .text._sbrk 0x08003f58 0x6c ./Core/Src/sysmem.o + 0x08003f58 _sbrk + .text.SystemInit + 0x08003fc4 0x24 ./Core/Src/system_stm32l4xx.o + 0x08003fc4 SystemInit + .text.Reset_Handler + 0x08003fe8 0x50 ./Core/Startup/startup_stm32l452retxp.o + 0x08003fe8 Reset_Handler + .text.Default_Handler + 0x08004038 0x2 ./Core/Startup/startup_stm32l452retxp.o + 0x08004038 RTC_Alarm_IRQHandler + 0x08004038 EXTI2_IRQHandler + 0x08004038 TIM1_CC_IRQHandler + 0x08004038 TSC_IRQHandler + 0x08004038 TAMP_STAMP_IRQHandler + 0x08004038 EXTI3_IRQHandler + 0x08004038 LPTIM2_IRQHandler + 0x08004038 DFSDM1_FLT1_IRQHandler + 0x08004038 I2C3_ER_IRQHandler + 0x08004038 EXTI0_IRQHandler + 0x08004038 I2C2_EV_IRQHandler + 0x08004038 CAN1_RX0_IRQHandler + 0x08004038 FPU_IRQHandler + 0x08004038 TIM1_UP_TIM16_IRQHandler + 0x08004038 SPI1_IRQHandler + 0x08004038 TIM6_DAC_IRQHandler + 0x08004038 DMA2_Channel2_IRQHandler + 0x08004038 DMA1_Channel4_IRQHandler + 0x08004038 ADC1_IRQHandler + 0x08004038 USART3_IRQHandler + 0x08004038 DMA1_Channel7_IRQHandler + 0x08004038 CAN1_RX1_IRQHandler + 0x08004038 DMA2_Channel1_IRQHandler + 0x08004038 QUADSPI_IRQHandler + 0x08004038 I2C1_EV_IRQHandler + 0x08004038 DMA1_Channel6_IRQHandler + 0x08004038 UART4_IRQHandler + 0x08004038 DMA2_Channel4_IRQHandler + 0x08004038 TIM3_IRQHandler + 0x08004038 RCC_IRQHandler + 0x08004038 TIM1_TRG_COM_IRQHandler + 0x08004038 DMA1_Channel1_IRQHandler + 0x08004038 Default_Handler + 0x08004038 DMA2_Channel7_IRQHandler + 0x08004038 EXTI15_10_IRQHandler + 0x08004038 SDMMC1_IRQHandler + 0x08004038 I2C3_EV_IRQHandler + 0x08004038 USB_IRQHandler + 0x08004038 EXTI9_5_IRQHandler + 0x08004038 RTC_WKUP_IRQHandler + 0x08004038 PVD_PVM_IRQHandler + 0x08004038 SPI2_IRQHandler + 0x08004038 CAN1_TX_IRQHandler + 0x08004038 DMA2_Channel5_IRQHandler + 0x08004038 CRS_IRQHandler + 0x08004038 DMA1_Channel5_IRQHandler + 0x08004038 EXTI4_IRQHandler + 0x08004038 RNG_IRQHandler + 0x08004038 DMA1_Channel3_IRQHandler + 0x08004038 COMP_IRQHandler + 0x08004038 WWDG_IRQHandler + 0x08004038 I2C4_EV_IRQHandler + 0x08004038 LPUART1_IRQHandler + 0x08004038 DMA2_Channel6_IRQHandler + 0x08004038 TIM2_IRQHandler + 0x08004038 EXTI1_IRQHandler + 0x08004038 USART2_IRQHandler + 0x08004038 DFSDM1_FLT0_IRQHandler + 0x08004038 I2C2_ER_IRQHandler + 0x08004038 DMA1_Channel2_IRQHandler + 0x08004038 CAN1_SCE_IRQHandler + 0x08004038 FLASH_IRQHandler + 0x08004038 USART1_IRQHandler + 0x08004038 SPI3_IRQHandler + 0x08004038 I2C1_ER_IRQHandler + 0x08004038 LPTIM1_IRQHandler + 0x08004038 I2C4_ER_IRQHandler + 0x08004038 SAI1_IRQHandler + 0x08004038 DMA2_Channel3_IRQHandler + 0x08004038 TIM1_BRK_TIM15_IRQHandler + *fill* 0x0800403a 0x2 + .text.HAL_Init + 0x0800403c 0x40 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + 0x0800403c HAL_Init + .text.HAL_InitTick + 0x0800407c 0x78 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + 0x0800407c HAL_InitTick + .text.HAL_IncTick + 0x080040f4 0x28 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + 0x080040f4 HAL_IncTick + .text.HAL_GetTick + 0x0800411c 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + 0x0800411c HAL_GetTick + .text.HAL_Delay + 0x08004134 0x48 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + 0x08004134 HAL_Delay + .text.__NVIC_SetPriorityGrouping + 0x0800417c 0x48 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.__NVIC_GetPriorityGrouping + 0x080041c4 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.__NVIC_SetPriority + 0x080041e0 0x54 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.NVIC_EncodePriority + 0x08004234 0x66 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + *fill* 0x0800429a 0x2 + .text.SysTick_Config + 0x0800429c 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .text.HAL_NVIC_SetPriorityGrouping + 0x080042e0 0x16 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + 0x080042e0 HAL_NVIC_SetPriorityGrouping + .text.HAL_NVIC_SetPriority + 0x080042f6 0x38 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + 0x080042f6 HAL_NVIC_SetPriority + .text.HAL_SYSTICK_Config + 0x0800432e 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + 0x0800432e HAL_SYSTICK_Config + *fill* 0x08004346 0x2 + .text.HAL_GPIO_Init + 0x08004348 0x2f4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + 0x08004348 HAL_GPIO_Init + .text.HAL_GPIO_WritePin + 0x0800463c 0x30 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + 0x0800463c HAL_GPIO_WritePin + .text.HAL_I2C_Init + 0x0800466c 0x136 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + 0x0800466c HAL_I2C_Init + *fill* 0x080047a2 0x2 + .text.HAL_I2C_Master_Transmit + 0x080047a4 0x230 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + 0x080047a4 HAL_I2C_Master_Transmit + .text.HAL_I2C_Mem_Write + 0x080049d4 0x228 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + 0x080049d4 HAL_I2C_Mem_Write + .text.HAL_I2C_Mem_Read + 0x08004bfc 0x234 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + 0x08004bfc HAL_I2C_Mem_Read + .text.I2C_RequestMemoryWrite + 0x08004e30 0xa8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_RequestMemoryRead + 0x08004ed8 0xa8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_Flush_TXDR + 0x08004f80 0x48 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_WaitOnFlagUntilTimeout + 0x08004fc8 0xb2 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_WaitOnTXISFlagUntilTimeout + 0x0800507a 0x8e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_WaitOnSTOPFlagUntilTimeout + 0x08005108 0x86 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + *fill* 0x0800518e 0x2 + .text.I2C_IsErrorOccurred + 0x08005190 0x1c0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.I2C_TransferConfig + 0x08005350 0x64 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .text.HAL_I2CEx_ConfigAnalogFilter + 0x080053b4 0x96 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + 0x080053b4 HAL_I2CEx_ConfigAnalogFilter + .text.HAL_I2CEx_ConfigDigitalFilter + 0x0800544a 0x98 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + 0x0800544a HAL_I2CEx_ConfigDigitalFilter + *fill* 0x080054e2 0x2 + .text.HAL_PWREx_GetVoltageRange + 0x080054e4 0x1c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + 0x080054e4 HAL_PWREx_GetVoltageRange + .text.HAL_PWREx_ControlVoltageScaling + 0x08005500 0xac ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + 0x08005500 HAL_PWREx_ControlVoltageScaling + .text.HAL_RCC_OscConfig + 0x080055ac 0x828 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + 0x080055ac HAL_RCC_OscConfig + .text.HAL_RCC_ClockConfig + 0x08005dd4 0x200 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + 0x08005dd4 HAL_RCC_ClockConfig + .text.HAL_RCC_GetSysClockFreq + 0x08005fd4 0x118 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + 0x08005fd4 HAL_RCC_GetSysClockFreq + .text.HAL_RCC_GetHCLKFreq + 0x080060ec 0x18 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + 0x080060ec HAL_RCC_GetHCLKFreq + .text.HAL_RCC_GetPCLK1Freq + 0x08006104 0x2c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + 0x08006104 HAL_RCC_GetPCLK1Freq + .text.HAL_RCC_GetPCLK2Freq + 0x08006130 0x2c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + 0x08006130 HAL_RCC_GetPCLK2Freq + .text.RCC_SetFlashLatencyFromMSIRange + 0x0800615c 0xc0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .text.HAL_RCCEx_PeriphCLKConfig + 0x0800621c 0x4d8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + 0x0800621c HAL_RCCEx_PeriphCLKConfig + .text.RCCEx_PLLSAI1_Config + 0x080066f4 0x1e4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .text.HAL_UART_Init + 0x080068d8 0x9c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + 0x080068d8 HAL_UART_Init + .text.HAL_UART_Transmit + 0x08006974 0x112 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + 0x08006974 HAL_UART_Transmit + *fill* 0x08006a86 0x2 + .text.UART_SetConfig + 0x08006a88 0x50c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + 0x08006a88 UART_SetConfig + .text.UART_AdvFeatureConfig + 0x08006f94 0x144 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + 0x08006f94 UART_AdvFeatureConfig + .text.UART_CheckIdleState + 0x080070d8 0x150 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + 0x080070d8 UART_CheckIdleState + .text.UART_WaitOnFlagUntilTimeout + 0x08007228 0xda ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + 0x08007228 UART_WaitOnFlagUntilTimeout + .text.UART_EndRxTransfer + 0x08007302 0xc8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .text.__cvt 0x080073ca 0xca C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) + 0x080073ca __cvt + .text.__exponent + 0x08007494 0x74 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) + 0x08007494 __exponent + .text._printf_float + 0x08007508 0x454 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) + 0x08007508 _printf_float + .text._printf_common + 0x0800795c 0xda C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_i.o) + 0x0800795c _printf_common + *fill* 0x08007a36 0x2 + .text._printf_i + 0x08007a38 0x23c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_i.o) + 0x08007a38 _printf_i + .text.std 0x08007c74 0x6c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .text.stdio_exit_handler + 0x08007ce0 0x18 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .text.cleanup_stdio + 0x08007cf8 0x40 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .text.global_stdio_init.part.0 + 0x08007d38 0x3c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .text.__sfp_lock_acquire + 0x08007d74 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + 0x08007d74 __sfp_lock_acquire + .text.__sfp_lock_release + 0x08007d80 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + 0x08007d80 __sfp_lock_release + .text.__sinit 0x08007d8c 0x30 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + 0x08007d8c __sinit + .text._fwalk_sglue + 0x08007dbc 0x3c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fwalk.o) + 0x08007dbc _fwalk_sglue + .text.printf 0x08007df8 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-printf.o) + 0x08007df8 iprintf + 0x08007df8 printf + .text.snprintf + 0x08007e1c 0x6c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-snprintf.o) + 0x08007e1c sniprintf + 0x08007e1c snprintf + .text.__sread 0x08007e88 0x22 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) + 0x08007e88 __sread + .text.__swrite + 0x08007eaa 0x38 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) + 0x08007eaa __swrite + .text.__sseek 0x08007ee2 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) + 0x08007ee2 __sseek + .text.__sclose + 0x08007f06 0x8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) + 0x08007f06 __sclose + .text.memset 0x08007f0e 0x10 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memset.o) + 0x08007f0e memset + *fill* 0x08007f1e 0x2 + .text._localeconv_r + 0x08007f20 0x8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-localeconv.o) + 0x08007f20 _localeconv_r + .text._close_r + 0x08007f28 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-closer.o) + 0x08007f28 _close_r + .text._lseek_r + 0x08007f48 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lseekr.o) + 0x08007f48 _lseek_r + .text._read_r 0x08007f6c 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-readr.o) + 0x08007f6c _read_r + .text._write_r + 0x08007f90 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-writer.o) + 0x08007f90 _write_r + .text.__errno 0x08007fb4 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-errno.o) + 0x08007fb4 __errno + .text.__libc_init_array + 0x08007fc0 0x48 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-init.o) + 0x08007fc0 __libc_init_array + .text.__retarget_lock_init_recursive + 0x08008008 0x2 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + 0x08008008 __retarget_lock_init_recursive + .text.__retarget_lock_acquire_recursive + 0x0800800a 0x2 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + 0x0800800a __retarget_lock_acquire_recursive + .text.__retarget_lock_release_recursive + 0x0800800c 0x2 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + 0x0800800c __retarget_lock_release_recursive + .text.quorem 0x0800800e 0x110 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) + *fill* 0x0800811e 0x2 + .text._dtoa_r 0x08008120 0xba0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) + 0x08008120 _dtoa_r + .text._free_r 0x08008cc0 0x94 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-freer.o) + 0x08008cc0 _free_r + .text.malloc 0x08008d54 0x10 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-malloc.o) + 0x08008d54 malloc + .text.sbrk_aligned + 0x08008d64 0x44 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mallocr.o) + .text._malloc_r + 0x08008da8 0x100 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mallocr.o) + 0x08008da8 _malloc_r + .text.__malloc_lock + 0x08008ea8 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mlock.o) + 0x08008ea8 __malloc_lock + .text.__malloc_unlock + 0x08008eb4 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mlock.o) + 0x08008eb4 __malloc_unlock + .text._Balloc 0x08008ec0 0x80 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x08008ec0 _Balloc + .text._Bfree 0x08008f40 0x44 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x08008f40 _Bfree + .text.__multadd + 0x08008f84 0x8c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x08008f84 __multadd + .text.__hi0bits + 0x08009010 0x3e C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x08009010 __hi0bits + .text.__lo0bits + 0x0800904e 0x5a C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x0800904e __lo0bits + .text.__i2b 0x080090a8 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x080090a8 __i2b + .text.__multiply + 0x080090d4 0x144 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x080090d4 __multiply + .text.__pow5mult + 0x08009218 0xb4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x08009218 __pow5mult + .text.__lshift + 0x080092cc 0xd8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x080092cc __lshift + .text.__mcmp 0x080093a4 0x36 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x080093a4 __mcmp + *fill* 0x080093da 0x2 + .text.__mdiff 0x080093dc 0x128 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x080093dc __mdiff + .text.__d2b 0x08009504 0xb0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x08009504 __d2b + .text.__ssputs_r + 0x080095b4 0xb6 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-svfprintf.o) + 0x080095b4 __ssputs_r + *fill* 0x0800966a 0x2 + .text._svfprintf_r + 0x0800966c 0x1f8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-svfprintf.o) + 0x0800966c _svfiprintf_r + 0x0800966c _svfprintf_r + .text.__sfputc_r + 0x08009864 0x2e C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) + .text.__sfputs_r + 0x08009892 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) + 0x08009892 __sfputs_r + *fill* 0x080098b6 0x2 + .text._vfprintf_r + 0x080098b8 0x230 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) + 0x080098b8 _vfprintf_r + 0x080098b8 _vfiprintf_r + .text.__sflush_r + 0x08009ae8 0x108 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fflush.o) + 0x08009ae8 __sflush_r + .text._fflush_r + 0x08009bf0 0x50 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fflush.o) + 0x08009bf0 _fflush_r + .text.__swbuf_r + 0x08009c40 0x7c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wbuf.o) + 0x08009c40 __swbuf_r + .text.__swsetup_r + 0x08009cbc 0xac C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wsetup.o) + 0x08009cbc __swsetup_r + .text.memmove 0x08009d68 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memmove.o) + 0x08009d68 memmove + .text._sbrk_r 0x08009d9c 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-sbrkr.o) + 0x08009d9c _sbrk_r + .text.memcpy 0x08009dbc 0x1c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memcpy-stub.o) + 0x08009dbc memcpy + .text.__assert_func + 0x08009dd8 0x3c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-assert.o) + 0x08009dd8 __assert_func + .text._calloc_r + 0x08009e14 0x28 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-callocr.o) + 0x08009e14 _calloc_r + .text.__ascii_mbtowc + 0x08009e3c 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mbtowc_r.o) + 0x08009e3c __ascii_mbtowc + .text._realloc_r + 0x08009e60 0x5c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reallocr.o) + 0x08009e60 _realloc_r + .text.__ascii_wctomb + 0x08009ebc 0x1a C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wctomb_r.o) + 0x08009ebc __ascii_wctomb + *fill* 0x08009ed6 0x2 + .text.fprintf 0x08009ed8 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fprintf.o) + 0x08009ed8 fiprintf + 0x08009ed8 fprintf + .text.__swhatbuf_r + 0x08009efc 0x4c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-makebuf.o) + 0x08009efc __swhatbuf_r + .text.__smakebuf_r + 0x08009f48 0x78 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-makebuf.o) + 0x08009f48 __smakebuf_r + .text._fstat_r + 0x08009fc0 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fstatr.o) + 0x08009fc0 _fstat_r + .text._isatty_r + 0x08009fe4 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-isattyr.o) + 0x08009fe4 _isatty_r + .text.abort 0x0800a004 0xe C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-abort.o) + 0x0800a004 abort + .text._malloc_usable_size_r + 0x0800a012 0x10 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-msizer.o) + 0x0800a012 _malloc_usable_size_r + .text._raise_r + 0x0800a022 0x50 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + 0x0800a022 _raise_r + *fill* 0x0800a072 0x2 + .text.raise 0x0800a074 0x10 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + 0x0800a074 raise + .text._kill_r 0x0800a084 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signalr.o) + 0x0800a084 _kill_r + .text._getpid_r + 0x0800a0a8 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signalr.o) + 0x0800a0a8 _getpid_r + .text.asinf 0x0800a0ac 0x58 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_asin.o) + 0x0800a0ac asinf + .text.atan2f 0x0800a104 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_atan2.o) + 0x0800a104 atan2f + .text.powf 0x0800a108 0xae C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_pow.o) + 0x0800a108 powf + *fill* 0x0800a1b6 0x2 + .text.sqrtf 0x0800a1b8 0x3c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_sqrt.o) + 0x0800a1b8 sqrtf + .text.fabsf 0x0800a1f4 0xe C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_fabs.o) + 0x0800a1f4 fabsf + *fill* 0x0800a202 0x2 + .text.sinf 0x0800a204 0x8c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_sin.o) + 0x0800a204 sinf + .text.finitef 0x0800a290 0x14 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_finite.o) + 0x0800a290 finitef + .text.nanf 0x0800a2a4 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_nan.o) + 0x0800a2a4 nanf + .text.__ieee754_sqrtf + 0x0800a2b0 0x6 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_sqrt.o) + 0x0800a2b0 __ieee754_sqrtf + *fill* 0x0800a2b6 0x2 + .text.__kernel_cosf + 0x0800a2b8 0xb0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_cos.o) + 0x0800a2b8 __kernel_cosf + .text.__kernel_sinf + 0x0800a368 0x90 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_sin.o) + 0x0800a368 __kernel_sinf + .text.__ieee754_asinf + 0x0800a3f8 0x1c8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_asin.o) + 0x0800a3f8 __ieee754_asinf + .text.__ieee754_atan2f + 0x0800a5c0 0x140 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_atan2.o) + 0x0800a5c0 __ieee754_atan2f + .text.__ieee754_powf + 0x0800a700 0x59c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_pow.o) + 0x0800a700 __ieee754_powf + .text.__ieee754_rem_pio2f + 0x0800ac9c 0x260 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_rem_pio2.o) + 0x0800ac9c __ieee754_rem_pio2f + .text.atanf 0x0800aefc 0x1a8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_atan.o) + 0x0800aefc atanf + .text.scalbnf 0x0800b0a4 0xcc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_scalbn.o) + 0x0800b0a4 scalbnf + .text.with_errnof + 0x0800b170 0x1c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-math_errf.o) + .text.xflowf 0x0800b18c 0x16 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-math_errf.o) + *fill* 0x0800b1a2 0x2 + .text.__math_uflowf + 0x0800b1a4 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-math_errf.o) + 0x0800b1a4 __math_uflowf + .text.__math_oflowf + 0x0800b1b0 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-math_errf.o) + 0x0800b1b0 __math_oflowf + .text.__kernel_rem_pio2f + 0x0800b1bc 0x4d0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_rem_pio2.o) + 0x0800b1bc __kernel_rem_pio2f + .text.floorf 0x0800b68c 0x88 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_floor.o) + 0x0800b68c floorf + *(.glue_7) + .glue_7 0x0800b714 0x0 linker stubs + *(.glue_7t) + .glue_7t 0x0800b714 0x0 linker stubs + *(.eh_frame) + .eh_frame 0x0800b714 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtbegin.o + *(.init) + .init 0x0800b714 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crti.o + 0x0800b714 _init + .init 0x0800b718 0x8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtn.o + *(.fini) + .fini 0x0800b720 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crti.o + 0x0800b720 _fini + .fini 0x0800b724 0x8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtn.o + 0x0800b72c . = ALIGN (0x4) + 0x0800b72c _etext = . + +.vfp11_veneer 0x0800b72c 0x0 + .vfp11_veneer 0x0800b72c 0x0 linker stubs + +.v4_bx 0x0800b72c 0x0 + .v4_bx 0x0800b72c 0x0 linker stubs + +.iplt 0x0800b72c 0x0 + .iplt 0x0800b72c 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtbegin.o + +.rodata 0x0800b730 0x9a4 + 0x0800b730 . = ALIGN (0x4) + *(.rodata) + .rodata 0x0800b730 0x18 ./Core/Src/FusionAhrs.o + .rodata 0x0800b748 0x74 ./Core/Src/main.o + .rodata 0x0800b7bc 0x137 ./Core/Src/moto_config.o + *(.rodata*) + *fill* 0x0800b8f3 0x1 + .rodata.AHBPrescTable + 0x0800b8f4 0x10 ./Core/Src/system_stm32l4xx.o + 0x0800b8f4 AHBPrescTable + .rodata.APBPrescTable + 0x0800b904 0x8 ./Core/Src/system_stm32l4xx.o + 0x0800b904 APBPrescTable + .rodata.MSIRangeTable + 0x0800b90c 0x30 ./Core/Src/system_stm32l4xx.o + 0x0800b90c MSIRangeTable + .rodata._printf_float.str1.1 + 0x0800b93c 0x171 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) + 0x12 (size before relaxing) + .rodata._printf_i.str1.1 + 0x0800baad 0x22 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_i.o) + .rodata._dtoa_r.str1.1 + 0x0800baad 0x8f C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) + .rodata._Balloc.str1.1 + 0x0800baad 0x70 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .rodata.__multadd.str1.1 + 0x0800baad 0x11 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + *fill* 0x0800baad 0x3 + .rodata.p05.0 0x0800bab0 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + *fill* 0x0800babc 0x4 + .rodata.__mprec_bigtens + 0x0800bac0 0x28 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x0800bac0 __mprec_bigtens + .rodata.__mprec_tens + 0x0800bae8 0xc8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + 0x0800bae8 __mprec_tens + .rodata._svfprintf_r.str1.1 + 0x0800bbb0 0x11 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-svfprintf.o) + .rodata._vfprintf_r.str1.1 + 0x0800bbb0 0x11 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) + .rodata._setlocale_r.str1.1 + 0x0800bbb0 0x9 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) + .rodata.str1.1 + 0x0800bbb0 0x2 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) + .rodata.__assert_func.str1.1 + 0x0800bbb0 0x3d C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-assert.o) + .rodata._ctype_ + 0x0800bbb0 0x101 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-ctype_.o) + 0x0800bbb0 _ctype_ + .rodata.asinf.str1.1 + 0x0800bcb1 0x1 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_asin.o) + *fill* 0x0800bcb1 0x3 + .rodata.CSWTCH.9 + 0x0800bcb4 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_atan2.o) + .rodata.CSWTCH.8 + 0x0800bcc0 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_atan2.o) + .rodata.dp_l 0x0800bccc 0x8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_pow.o) + .rodata.dp_h 0x0800bcd4 0x8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_pow.o) + .rodata.bp 0x0800bcdc 0x8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_pow.o) + .rodata.npio2_hw + 0x0800bce4 0x80 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_rem_pio2.o) + .rodata.two_over_pi + 0x0800bd64 0x318 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_rem_pio2.o) + .rodata.atanlo + 0x0800c07c 0x10 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_atan.o) + .rodata.atanhi + 0x0800c08c 0x10 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_atan.o) + .rodata.PIo2 0x0800c09c 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_rem_pio2.o) + .rodata.init_jk + 0x0800c0c8 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_rem_pio2.o) + 0x0800c0d4 . = ALIGN (0x4) + +.ARM.extab 0x0800c0d4 0x0 + 0x0800c0d4 . = ALIGN (0x4) + *(.ARM.extab* .gnu.linkonce.armextab.*) + 0x0800c0d4 . = ALIGN (0x4) + +.ARM 0x0800c0d4 0x8 + 0x0800c0d4 . = ALIGN (0x4) + 0x0800c0d4 __exidx_start = . + *(.ARM.exidx*) + .ARM.exidx 0x0800c0d4 0x8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memchr.o) + .ARM.exidx 0x0800c0dc 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strlen.o) + 0x8 (size before relaxing) + .ARM.exidx 0x0800c0dc 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_udivmoddi4.o) + 0x8 (size before relaxing) + 0x0800c0dc __exidx_end = . + 0x0800c0dc . = ALIGN (0x4) + +.preinit_array 0x0800c0dc 0x0 + 0x0800c0dc . = ALIGN (0x4) + 0x0800c0dc PROVIDE (__preinit_array_start = .) + *(.preinit_array*) + 0x0800c0dc PROVIDE (__preinit_array_end = .) + 0x0800c0dc . = ALIGN (0x4) + +.init_array 0x0800c0dc 0x4 + 0x0800c0dc . = ALIGN (0x4) + 0x0800c0dc PROVIDE (__init_array_start = .) + *(SORT_BY_NAME(.init_array.*)) + *(.init_array*) + .init_array 0x0800c0dc 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtbegin.o + 0x0800c0e0 PROVIDE (__init_array_end = .) + 0x0800c0e0 . = ALIGN (0x4) + +.fini_array 0x0800c0e0 0x4 + 0x0800c0e0 . = ALIGN (0x4) + [!provide] PROVIDE (__fini_array_start = .) + *(SORT_BY_NAME(.fini_array.*)) + *(.fini_array*) + .fini_array 0x0800c0e0 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtbegin.o + [!provide] PROVIDE (__fini_array_end = .) + 0x0800c0e4 . = ALIGN (0x4) + 0x0800c0e4 _sidata = LOADADDR (.data) + +.rel.dyn 0x0800c0e4 0x0 + .rel.iplt 0x0800c0e4 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtbegin.o + +.data 0x20000000 0x1d4 load address 0x0800c0e4 + 0x20000000 . = ALIGN (0x4) + 0x20000000 _sdata = . + *(.data) + *(.data*) + .data.SystemCoreClock + 0x20000000 0x4 ./Core/Src/system_stm32l4xx.o + 0x20000000 SystemCoreClock + .data.uwTickPrio + 0x20000004 0x4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + 0x20000004 uwTickPrio + .data.uwTickFreq + 0x20000008 0x1 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + 0x20000008 uwTickFreq + *fill* 0x20000009 0x3 + .data.__sglue 0x2000000c 0xc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + 0x2000000c __sglue + .data._impure_ptr + 0x20000018 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-impure.o) + 0x20000018 _impure_ptr + .data._impure_data + 0x2000001c 0x4c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-impure.o) + 0x2000001c _impure_data + .data.__global_locale + 0x20000068 0x16c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) + 0x20000068 __global_locale + *(.RamFunc) + *(.RamFunc*) + 0x200001d4 . = ALIGN (0x4) + 0x200001d4 _edata = . + +.igot.plt 0x200001d4 0x0 load address 0x0800c2b8 + .igot.plt 0x200001d4 0x0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtbegin.o + 0x200001d4 . = ALIGN (0x4) + +.bss 0x200001d4 0x31c load address 0x0800c2b8 + 0x200001d4 _sbss = . + 0x200001d4 __bss_start__ = _sbss + *(.bss) + .bss 0x200001d4 0x1c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtbegin.o + *(.bss*) + .bss.hi2c1 0x200001f0 0x54 ./Core/Src/main.o + 0x200001f0 hi2c1 + .bss.huart2 0x20000244 0x88 ./Core/Src/main.o + 0x20000244 huart2 + .bss.ahrs 0x200002cc 0x74 ./Core/Src/main.o + 0x200002cc ahrs + .bss.moto_data + 0x20000340 0x24 ./Core/Src/main.o + 0x20000340 moto_data + .bss.moto_stats + 0x20000364 0x28 ./Core/Src/main.o + 0x20000364 moto_stats + .bss.mx_filtered + 0x2000038c 0x4 ./Core/Src/main.o + 0x2000038c mx_filtered + .bss.my_filtered + 0x20000390 0x4 ./Core/Src/main.o + 0x20000390 my_filtered + .bss.mz_filtered + 0x20000394 0x4 ./Core/Src/main.o + 0x20000394 mz_filtered + .bss.uart_counter.0 + 0x20000398 0x4 ./Core/Src/main.o + .bss.__sbrk_heap_end + 0x2000039c 0x4 ./Core/Src/sysmem.o + .bss.uwTick 0x200003a0 0x4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + 0x200003a0 uwTick + .bss.__sf 0x200003a4 0x138 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + 0x200003a4 __sf + .bss.__stdio_exit_handler + 0x200004dc 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + 0x200004dc __stdio_exit_handler + .bss.errno 0x200004e0 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reent.o) + 0x200004e0 errno + .bss.__lock___malloc_recursive_mutex + 0x200004e4 0x1 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + 0x200004e4 __lock___malloc_recursive_mutex + .bss.__lock___sfp_recursive_mutex + 0x200004e5 0x1 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + 0x200004e5 __lock___sfp_recursive_mutex + *fill* 0x200004e6 0x2 + .bss.__malloc_sbrk_start + 0x200004e8 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mallocr.o) + 0x200004e8 __malloc_sbrk_start + .bss.__malloc_free_list + 0x200004ec 0x4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mallocr.o) + 0x200004ec __malloc_free_list + *(COMMON) + 0x200004f0 . = ALIGN (0x4) + 0x200004f0 _ebss = . + 0x200004f0 __bss_end__ = _ebss + +._user_heap_stack + 0x200004f0 0xc00 load address 0x0800c2b8 + 0x200004f0 . = ALIGN (0x8) + [!provide] PROVIDE (end = .) + 0x200004f0 PROVIDE (_end = .) + 0x200008f0 . = (. + _Min_Heap_Size) + *fill* 0x200004f0 0x400 + 0x200010f0 . = (. + _Min_Stack_Size) + *fill* 0x200008f0 0x800 + 0x200010f0 . = ALIGN (0x8) + +/DISCARD/ + libc.a(*) + libm.a(*) + libgcc.a(*) + +.ARM.attributes + 0x00000000 0x30 + *(.ARM.attributes) + .ARM.attributes + 0x00000000 0x22 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crti.o + .ARM.attributes + 0x00000022 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtbegin.o + .ARM.attributes + 0x00000056 0x34 ./Core/Src/FusionAhrs.o + .ARM.attributes + 0x0000008a 0x34 ./Core/Src/icm20948.o + .ARM.attributes + 0x000000be 0x34 ./Core/Src/lcd_i2c.o + .ARM.attributes + 0x000000f2 0x34 ./Core/Src/main.o + .ARM.attributes + 0x00000126 0x34 ./Core/Src/moto_config.o + .ARM.attributes + 0x0000015a 0x34 ./Core/Src/stm32l4xx_hal_msp.o + .ARM.attributes + 0x0000018e 0x34 ./Core/Src/stm32l4xx_it.o + .ARM.attributes + 0x000001c2 0x34 ./Core/Src/syscalls.o + .ARM.attributes + 0x000001f6 0x34 ./Core/Src/sysmem.o + .ARM.attributes + 0x0000022a 0x34 ./Core/Src/system_stm32l4xx.o + .ARM.attributes + 0x0000025e 0x21 ./Core/Startup/startup_stm32l452retxp.o + .ARM.attributes + 0x0000027f 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .ARM.attributes + 0x000002b3 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .ARM.attributes + 0x000002e7 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .ARM.attributes + 0x0000031b 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .ARM.attributes + 0x0000034f 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .ARM.attributes + 0x00000383 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .ARM.attributes + 0x000003b7 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .ARM.attributes + 0x000003eb 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .ARM.attributes + 0x0000041f 0x34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .ARM.attributes + 0x00000453 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) + .ARM.attributes + 0x00000487 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_i.o) + .ARM.attributes + 0x000004bb 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .ARM.attributes + 0x000004ef 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fwalk.o) + .ARM.attributes + 0x00000523 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-printf.o) + .ARM.attributes + 0x00000557 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-snprintf.o) + .ARM.attributes + 0x0000058b 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) + .ARM.attributes + 0x000005bf 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memset.o) + .ARM.attributes + 0x000005f3 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-localeconv.o) + .ARM.attributes + 0x00000627 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-closer.o) + .ARM.attributes + 0x0000065b 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reent.o) + .ARM.attributes + 0x0000068f 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-impure.o) + .ARM.attributes + 0x000006c3 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lseekr.o) + .ARM.attributes + 0x000006f7 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-readr.o) + .ARM.attributes + 0x0000072b 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-writer.o) + .ARM.attributes + 0x0000075f 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-errno.o) + .ARM.attributes + 0x00000793 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-init.o) + .ARM.attributes + 0x000007c7 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .ARM.attributes + 0x000007fb 0x1c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memchr.o) + .ARM.attributes + 0x00000817 0x17 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-strlen.o) + .ARM.attributes + 0x0000082e 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) + .ARM.attributes + 0x00000862 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-freer.o) + .ARM.attributes + 0x00000896 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-malloc.o) + .ARM.attributes + 0x000008ca 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mallocr.o) + .ARM.attributes + 0x000008fe 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mlock.o) + .ARM.attributes + 0x00000932 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .ARM.attributes + 0x00000966 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-svfprintf.o) + .ARM.attributes + 0x0000099a 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) + .ARM.attributes + 0x000009ce 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fflush.o) + .ARM.attributes + 0x00000a02 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wbuf.o) + .ARM.attributes + 0x00000a36 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wsetup.o) + .ARM.attributes + 0x00000a6a 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memmove.o) + .ARM.attributes + 0x00000a9e 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) + .ARM.attributes + 0x00000ad2 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-sbrkr.o) + .ARM.attributes + 0x00000b06 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memcpy-stub.o) + .ARM.attributes + 0x00000b3a 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-assert.o) + .ARM.attributes + 0x00000b6e 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-callocr.o) + .ARM.attributes + 0x00000ba2 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mbtowc_r.o) + .ARM.attributes + 0x00000bd6 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reallocr.o) + .ARM.attributes + 0x00000c0a 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wctomb_r.o) + .ARM.attributes + 0x00000c3e 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-ctype_.o) + .ARM.attributes + 0x00000c72 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fprintf.o) + .ARM.attributes + 0x00000ca6 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-makebuf.o) + .ARM.attributes + 0x00000cda 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fstatr.o) + .ARM.attributes + 0x00000d0e 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-isattyr.o) + .ARM.attributes + 0x00000d42 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-abort.o) + .ARM.attributes + 0x00000d76 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-msizer.o) + .ARM.attributes + 0x00000daa 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + .ARM.attributes + 0x00000dde 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signalr.o) + .ARM.attributes + 0x00000e12 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_asin.o) + .ARM.attributes + 0x00000e46 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_atan2.o) + .ARM.attributes + 0x00000e7a 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_pow.o) + .ARM.attributes + 0x00000eae 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_sqrt.o) + .ARM.attributes + 0x00000ee2 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_fabs.o) + .ARM.attributes + 0x00000f16 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_sin.o) + .ARM.attributes + 0x00000f4a 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_finite.o) + .ARM.attributes + 0x00000f7e 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_nan.o) + .ARM.attributes + 0x00000fb2 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_sqrt.o) + .ARM.attributes + 0x00000fe6 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_cos.o) + .ARM.attributes + 0x0000101a 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_sin.o) + .ARM.attributes + 0x0000104e 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_asin.o) + .ARM.attributes + 0x00001082 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_atan2.o) + .ARM.attributes + 0x000010b6 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_pow.o) + .ARM.attributes + 0x000010ea 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_rem_pio2.o) + .ARM.attributes + 0x0000111e 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_atan.o) + .ARM.attributes + 0x00001152 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_scalbn.o) + .ARM.attributes + 0x00001186 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-math_errf.o) + .ARM.attributes + 0x000011ba 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_rem_pio2.o) + .ARM.attributes + 0x000011ee 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_floor.o) + .ARM.attributes + 0x00001222 0x22 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_addsubdf3.o) + .ARM.attributes + 0x00001244 0x22 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_muldivdf3.o) + .ARM.attributes + 0x00001266 0x22 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_cmpdf2.o) + .ARM.attributes + 0x00001288 0x22 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_unorddf2.o) + .ARM.attributes + 0x000012aa 0x22 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_fixdfsi.o) + .ARM.attributes + 0x000012cc 0x22 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_aeabi_uldivmod.o) + .ARM.attributes + 0x000012ee 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_udivmoddi4.o) + .ARM.attributes + 0x00001322 0x22 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_dvmd_tls.o) + .ARM.attributes + 0x00001344 0x22 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard/crtn.o +OUTPUT(moto-perf.elf elf32-littlearm) +LOAD linker stubs +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc.a +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a +LOAD C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a + +.debug_info 0x00000000 0x1083b + .debug_info 0x00000000 0xf05 ./Core/Src/FusionAhrs.o + .debug_info 0x00000f05 0x87c ./Core/Src/icm20948.o + .debug_info 0x00001781 0x780 ./Core/Src/lcd_i2c.o + .debug_info 0x00001f01 0x1b4c ./Core/Src/main.o + .debug_info 0x00003a4d 0x497 ./Core/Src/moto_config.o + .debug_info 0x00003ee4 0x100f ./Core/Src/stm32l4xx_hal_msp.o + .debug_info 0x00004ef3 0x113 ./Core/Src/stm32l4xx_it.o + .debug_info 0x00005006 0x6a3 ./Core/Src/syscalls.o + .debug_info 0x000056a9 0x168 ./Core/Src/sysmem.o + .debug_info 0x00005811 0x5cd ./Core/Src/system_stm32l4xx.o + .debug_info 0x00005dde 0x30 ./Core/Startup/startup_stm32l452retxp.o + .debug_info 0x00005e0e 0xb89 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_info 0x00006997 0xd39 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_info 0x000076d0 0x763 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_info 0x00007e33 0x20d2 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_info 0x00009f05 0x98d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_info 0x0000a892 0x920 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_info 0x0000b1b2 0xbd0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_info 0x0000bd82 0xf34 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_info 0x0000ccb6 0x3b85 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + +.debug_abbrev 0x00000000 0x2713 + .debug_abbrev 0x00000000 0x2bd ./Core/Src/FusionAhrs.o + .debug_abbrev 0x000002bd 0x1f8 ./Core/Src/icm20948.o + .debug_abbrev 0x000004b5 0x1e1 ./Core/Src/lcd_i2c.o + .debug_abbrev 0x00000696 0x378 ./Core/Src/main.o + .debug_abbrev 0x00000a0e 0x183 ./Core/Src/moto_config.o + .debug_abbrev 0x00000b91 0x1dd ./Core/Src/stm32l4xx_hal_msp.o + .debug_abbrev 0x00000d6e 0x73 ./Core/Src/stm32l4xx_it.o + .debug_abbrev 0x00000de1 0x1b6 ./Core/Src/syscalls.o + .debug_abbrev 0x00000f97 0xbc ./Core/Src/sysmem.o + .debug_abbrev 0x00001053 0x11a ./Core/Src/system_stm32l4xx.o + .debug_abbrev 0x0000116d 0x24 ./Core/Startup/startup_stm32l452retxp.o + .debug_abbrev 0x00001191 0x242 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_abbrev 0x000013d3 0x31c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_abbrev 0x000016ef 0x1cb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_abbrev 0x000018ba 0x261 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_abbrev 0x00001b1b 0x1c3 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_abbrev 0x00001cde 0x1f9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_abbrev 0x00001ed7 0x2cb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_abbrev 0x000021a2 0x2a1 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_abbrev 0x00002443 0x2d0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + +.debug_aranges 0x00000000 0xec8 + .debug_aranges + 0x00000000 0x140 ./Core/Src/FusionAhrs.o + .debug_aranges + 0x00000140 0x58 ./Core/Src/icm20948.o + .debug_aranges + 0x00000198 0x50 ./Core/Src/lcd_i2c.o + .debug_aranges + 0x000001e8 0x68 ./Core/Src/main.o + .debug_aranges + 0x00000250 0x58 ./Core/Src/moto_config.o + .debug_aranges + 0x000002a8 0x40 ./Core/Src/stm32l4xx_hal_msp.o + .debug_aranges + 0x000002e8 0x60 ./Core/Src/stm32l4xx_it.o + .debug_aranges + 0x00000348 0xa8 ./Core/Src/syscalls.o + .debug_aranges + 0x000003f0 0x20 ./Core/Src/sysmem.o + .debug_aranges + 0x00000410 0x28 ./Core/Src/system_stm32l4xx.o + .debug_aranges + 0x00000438 0x28 ./Core/Startup/startup_stm32l452retxp.o + .debug_aranges + 0x00000460 0x130 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_aranges + 0x00000590 0x128 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_aranges + 0x000006b8 0x58 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_aranges + 0x00000710 0x2a0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_aranges + 0x000009b0 0x48 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_aranges + 0x000009f8 0x128 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_aranges + 0x00000b20 0x90 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_aranges + 0x00000bb0 0xf0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_aranges + 0x00000ca0 0x228 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + +.debug_rnglists + 0x00000000 0xb71 + .debug_rnglists + 0x00000000 0x104 ./Core/Src/FusionAhrs.o + .debug_rnglists + 0x00000104 0x40 ./Core/Src/icm20948.o + .debug_rnglists + 0x00000144 0x38 ./Core/Src/lcd_i2c.o + .debug_rnglists + 0x0000017c 0x4e ./Core/Src/main.o + .debug_rnglists + 0x000001ca 0x42 ./Core/Src/moto_config.o + .debug_rnglists + 0x0000020c 0x2d ./Core/Src/stm32l4xx_hal_msp.o + .debug_rnglists + 0x00000239 0x43 ./Core/Src/stm32l4xx_it.o + .debug_rnglists + 0x0000027c 0x79 ./Core/Src/syscalls.o + .debug_rnglists + 0x000002f5 0x13 ./Core/Src/sysmem.o + .debug_rnglists + 0x00000308 0x1a ./Core/Src/system_stm32l4xx.o + .debug_rnglists + 0x00000322 0x19 ./Core/Startup/startup_stm32l452retxp.o + .debug_rnglists + 0x0000033b 0xdf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_rnglists + 0x0000041a 0xda ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_rnglists + 0x000004f4 0x3f ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_rnglists + 0x00000533 0x228 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_rnglists + 0x0000075b 0x35 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_rnglists + 0x00000790 0xdf ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_rnglists + 0x0000086f 0x6d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_rnglists + 0x000008dc 0xba ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_rnglists + 0x00000996 0x1db ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + +.debug_macro 0x00000000 0x2408b + .debug_macro 0x00000000 0x1ad ./Core/Src/FusionAhrs.o + .debug_macro 0x000001ad 0xad8 ./Core/Src/FusionAhrs.o + .debug_macro 0x00000c85 0x201 ./Core/Src/FusionAhrs.o + .debug_macro 0x00000e86 0x22 ./Core/Src/FusionAhrs.o + .debug_macro 0x00000ea8 0x5b ./Core/Src/FusionAhrs.o + .debug_macro 0x00000f03 0x2a ./Core/Src/FusionAhrs.o + .debug_macro 0x00000f2d 0x94 ./Core/Src/FusionAhrs.o + .debug_macro 0x00000fc1 0x43 ./Core/Src/FusionAhrs.o + .debug_macro 0x00001004 0x34 ./Core/Src/FusionAhrs.o + .debug_macro 0x00001038 0x190 ./Core/Src/FusionAhrs.o + .debug_macro 0x000011c8 0x57 ./Core/Src/FusionAhrs.o + .debug_macro 0x0000121f 0x370 ./Core/Src/FusionAhrs.o + .debug_macro 0x0000158f 0x16 ./Core/Src/FusionAhrs.o + .debug_macro 0x000015a5 0x4a ./Core/Src/FusionAhrs.o + .debug_macro 0x000015ef 0x34 ./Core/Src/FusionAhrs.o + .debug_macro 0x00001623 0x10 ./Core/Src/FusionAhrs.o + .debug_macro 0x00001633 0x58 ./Core/Src/FusionAhrs.o + .debug_macro 0x0000168b 0x8e ./Core/Src/FusionAhrs.o + .debug_macro 0x00001719 0x1c ./Core/Src/FusionAhrs.o + .debug_macro 0x00001735 0x185 ./Core/Src/FusionAhrs.o + .debug_macro 0x000018ba 0x186 ./Core/Src/FusionAhrs.o + .debug_macro 0x00001a40 0x22 ./Core/Src/FusionAhrs.o + .debug_macro 0x00001a62 0x103 ./Core/Src/FusionAhrs.o + .debug_macro 0x00001b65 0x6a ./Core/Src/FusionAhrs.o + .debug_macro 0x00001bcf 0x1df ./Core/Src/FusionAhrs.o + .debug_macro 0x00001dae 0x9a ./Core/Src/FusionAhrs.o + .debug_macro 0x00001e48 0x1d5 ./Core/Src/icm20948.o + .debug_macro 0x0000201d 0x1a7 ./Core/Src/icm20948.o + .debug_macro 0x000021c4 0x2e ./Core/Src/icm20948.o + .debug_macro 0x000021f2 0x28 ./Core/Src/icm20948.o + .debug_macro 0x0000221a 0x8e ./Core/Src/icm20948.o + .debug_macro 0x000022a8 0x51 ./Core/Src/icm20948.o + .debug_macro 0x000022f9 0x1c ./Core/Src/icm20948.o + .debug_macro 0x00002315 0x22 ./Core/Src/icm20948.o + .debug_macro 0x00002337 0xfb ./Core/Src/icm20948.o + .debug_macro 0x00002432 0x1011 ./Core/Src/icm20948.o + .debug_macro 0x00003443 0x11f ./Core/Src/icm20948.o + .debug_macro 0x00003562 0x16336 ./Core/Src/icm20948.o + .debug_macro 0x00019898 0x6d ./Core/Src/icm20948.o + .debug_macro 0x00019905 0x38fb ./Core/Src/icm20948.o + .debug_macro 0x0001d200 0x5c ./Core/Src/icm20948.o + .debug_macro 0x0001d25c 0x13fa ./Core/Src/icm20948.o + .debug_macro 0x0001e656 0x646 ./Core/Src/icm20948.o + .debug_macro 0x0001ec9c 0x1b9 ./Core/Src/icm20948.o + .debug_macro 0x0001ee55 0x168 ./Core/Src/icm20948.o + .debug_macro 0x0001efbd 0x26b ./Core/Src/icm20948.o + .debug_macro 0x0001f228 0x23d ./Core/Src/icm20948.o + .debug_macro 0x0001f465 0x241 ./Core/Src/icm20948.o + .debug_macro 0x0001f6a6 0x375 ./Core/Src/icm20948.o + .debug_macro 0x0001fa1b 0xd6 ./Core/Src/icm20948.o + .debug_macro 0x0001faf1 0x22c ./Core/Src/icm20948.o + .debug_macro 0x0001fd1d 0x61 ./Core/Src/icm20948.o + .debug_macro 0x0001fd7e 0xa5 ./Core/Src/icm20948.o + .debug_macro 0x0001fe23 0x122 ./Core/Src/icm20948.o + .debug_macro 0x0001ff45 0x364 ./Core/Src/icm20948.o + .debug_macro 0x000202a9 0x5cf ./Core/Src/icm20948.o + .debug_macro 0x00020878 0x44 ./Core/Src/icm20948.o + .debug_macro 0x000208bc 0x2eb ./Core/Src/icm20948.o + .debug_macro 0x00020ba7 0x2af ./Core/Src/lcd_i2c.o + .debug_macro 0x00020e56 0x61 ./Core/Src/lcd_i2c.o + .debug_macro 0x00020eb7 0x10 ./Core/Src/lcd_i2c.o + .debug_macro 0x00020ec7 0x3c ./Core/Src/lcd_i2c.o + .debug_macro 0x00020f03 0x20 ./Core/Src/lcd_i2c.o + .debug_macro 0x00020f23 0x302 ./Core/Src/main.o + .debug_macro 0x00021225 0x16 ./Core/Src/main.o + .debug_macro 0x0002123b 0x9e ./Core/Src/main.o + .debug_macro 0x000212d9 0x112 ./Core/Src/main.o + .debug_macro 0x000213eb 0x10 ./Core/Src/main.o + .debug_macro 0x000213fb 0x16 ./Core/Src/main.o + .debug_macro 0x00021411 0x16 ./Core/Src/main.o + .debug_macro 0x00021427 0x146 ./Core/Src/main.o + .debug_macro 0x0002156d 0x19b ./Core/Src/main.o + .debug_macro 0x00021708 0x56 ./Core/Src/main.o + .debug_macro 0x0002175e 0x94 ./Core/Src/main.o + .debug_macro 0x000217f2 0x6a ./Core/Src/main.o + .debug_macro 0x0002185c 0x18f ./Core/Src/moto_config.o + .debug_macro 0x000219eb 0x64 ./Core/Src/moto_config.o + .debug_macro 0x00021a4f 0x16 ./Core/Src/moto_config.o + .debug_macro 0x00021a65 0x1c ./Core/Src/moto_config.o + .debug_macro 0x00021a81 0x1c ./Core/Src/moto_config.o + .debug_macro 0x00021a9d 0x1d4 ./Core/Src/stm32l4xx_hal_msp.o + .debug_macro 0x00021c71 0x1de ./Core/Src/stm32l4xx_it.o + .debug_macro 0x00021e4f 0x274 ./Core/Src/syscalls.o + .debug_macro 0x000220c3 0x10 ./Core/Src/syscalls.o + .debug_macro 0x000220d3 0x10 ./Core/Src/syscalls.o + .debug_macro 0x000220e3 0x10 ./Core/Src/syscalls.o + .debug_macro 0x000220f3 0x10 ./Core/Src/syscalls.o + .debug_macro 0x00022103 0x1c ./Core/Src/syscalls.o + .debug_macro 0x0002211f 0x52 ./Core/Src/syscalls.o + .debug_macro 0x00022171 0x22 ./Core/Src/syscalls.o + .debug_macro 0x00022193 0x10 ./Core/Src/syscalls.o + .debug_macro 0x000221a3 0x52 ./Core/Src/syscalls.o + .debug_macro 0x000221f5 0xcf ./Core/Src/syscalls.o + .debug_macro 0x000222c4 0x1c ./Core/Src/syscalls.o + .debug_macro 0x000222e0 0x3d ./Core/Src/syscalls.o + .debug_macro 0x0002231d 0x35 ./Core/Src/syscalls.o + .debug_macro 0x00022352 0x12c ./Core/Src/syscalls.o + .debug_macro 0x0002247e 0x16 ./Core/Src/syscalls.o + .debug_macro 0x00022494 0x16 ./Core/Src/syscalls.o + .debug_macro 0x000224aa 0x29 ./Core/Src/syscalls.o + .debug_macro 0x000224d3 0x10 ./Core/Src/syscalls.o + .debug_macro 0x000224e3 0x242 ./Core/Src/syscalls.o + .debug_macro 0x00022725 0x10 ./Core/Src/syscalls.o + .debug_macro 0x00022735 0x18a ./Core/Src/syscalls.o + .debug_macro 0x000228bf 0x16 ./Core/Src/syscalls.o + .debug_macro 0x000228d5 0xce ./Core/Src/syscalls.o + .debug_macro 0x000229a3 0x112 ./Core/Src/sysmem.o + .debug_macro 0x00022ab5 0x23c ./Core/Src/sysmem.o + .debug_macro 0x00022cf1 0x1c5 ./Core/Src/system_stm32l4xx.o + .debug_macro 0x00022eb6 0x213 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_macro 0x000230c9 0x1c5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_macro 0x0002328e 0x1cc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_macro 0x0002345a 0x291 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_macro 0x000236eb 0x1c5 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_macro 0x000238b0 0x1e9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_macro 0x00023a99 0x207 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_macro 0x00023ca0 0x1fb ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_macro 0x00023e9b 0x1f0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + +.debug_line 0x00000000 0x12411 + .debug_line 0x00000000 0x13f0 ./Core/Src/FusionAhrs.o + .debug_line 0x000013f0 0x8aa ./Core/Src/icm20948.o + .debug_line 0x00001c9a 0x963 ./Core/Src/lcd_i2c.o + .debug_line 0x000025fd 0xc7b ./Core/Src/main.o + .debug_line 0x00003278 0x869 ./Core/Src/moto_config.o + .debug_line 0x00003ae1 0x810 ./Core/Src/stm32l4xx_hal_msp.o + .debug_line 0x000042f1 0x7f6 ./Core/Src/stm32l4xx_it.o + .debug_line 0x00004ae7 0x8ac ./Core/Src/syscalls.o + .debug_line 0x00005393 0x588 ./Core/Src/sysmem.o + .debug_line 0x0000591b 0x7e5 ./Core/Src/system_stm32l4xx.o + .debug_line 0x00006100 0x7a ./Core/Startup/startup_stm32l452retxp.o + .debug_line 0x0000617a 0xb4e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_line 0x00006cc8 0xce8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_line 0x000079b0 0xb4d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_line 0x000084fd 0x374e ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_line 0x0000bc4b 0x8ad ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_line 0x0000c4f8 0xc4a ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_line 0x0000d142 0x10f0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_line 0x0000e232 0x1498 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_line 0x0000f6ca 0x2d47 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + +.debug_str 0x00000000 0xd3fc4 + .debug_str 0x00000000 0xd3fc4 ./Core/Src/FusionAhrs.o + 0x8b2f (size before relaxing) + .debug_str 0x000d3fc4 0xc8c66 ./Core/Src/icm20948.o + .debug_str 0x000d3fc4 0xcbe37 ./Core/Src/lcd_i2c.o + .debug_str 0x000d3fc4 0xcdf44 ./Core/Src/main.o + .debug_str 0x000d3fc4 0x860f ./Core/Src/moto_config.o + .debug_str 0x000d3fc4 0xc9407 ./Core/Src/stm32l4xx_hal_msp.o + .debug_str 0x000d3fc4 0xc894e ./Core/Src/stm32l4xx_it.o + .debug_str 0x000d3fc4 0x99de ./Core/Src/syscalls.o + .debug_str 0x000d3fc4 0x777c ./Core/Src/sysmem.o + .debug_str 0x000d3fc4 0xc88dc ./Core/Src/system_stm32l4xx.o + .debug_str 0x000d3fc4 0x7f ./Core/Startup/startup_stm32l452retxp.o + .debug_str 0x000d3fc4 0xc941c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_str 0x000d3fc4 0xc90ac ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_str 0x000d3fc4 0xc8a50 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_str 0x000d3fc4 0xc9ad3 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_str 0x000d3fc4 0xc8de9 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_str 0x000d3fc4 0xc8d7d ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_str 0x000d3fc4 0xc8edc ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_str 0x000d3fc4 0xc91a0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_str 0x000d3fc4 0xc9634 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + +.comment 0x00000000 0x43 + .comment 0x00000000 0x43 ./Core/Src/FusionAhrs.o + 0x44 (size before relaxing) + .comment 0x00000043 0x44 ./Core/Src/icm20948.o + .comment 0x00000043 0x44 ./Core/Src/lcd_i2c.o + .comment 0x00000043 0x44 ./Core/Src/main.o + .comment 0x00000043 0x44 ./Core/Src/moto_config.o + .comment 0x00000043 0x44 ./Core/Src/stm32l4xx_hal_msp.o + .comment 0x00000043 0x44 ./Core/Src/stm32l4xx_it.o + .comment 0x00000043 0x44 ./Core/Src/syscalls.o + .comment 0x00000043 0x44 ./Core/Src/sysmem.o + .comment 0x00000043 0x44 ./Core/Src/system_stm32l4xx.o + .comment 0x00000043 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .comment 0x00000043 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .comment 0x00000043 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .comment 0x00000043 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .comment 0x00000043 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .comment 0x00000043 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .comment 0x00000043 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .comment 0x00000043 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .comment 0x00000043 0x44 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + +.debug_frame 0x00000000 0x5328 + .debug_frame 0x00000000 0x5bc ./Core/Src/FusionAhrs.o + .debug_frame 0x000005bc 0x12c ./Core/Src/icm20948.o + .debug_frame 0x000006e8 0x100 ./Core/Src/lcd_i2c.o + .debug_frame 0x000007e8 0x16c ./Core/Src/main.o + .debug_frame 0x00000954 0x14c ./Core/Src/moto_config.o + .debug_frame 0x00000aa0 0xd0 ./Core/Src/stm32l4xx_hal_msp.o + .debug_frame 0x00000b70 0x104 ./Core/Src/stm32l4xx_it.o + .debug_frame 0x00000c74 0x2ac ./Core/Src/syscalls.o + .debug_frame 0x00000f20 0x34 ./Core/Src/sysmem.o + .debug_frame 0x00000f54 0x58 ./Core/Src/system_stm32l4xx.o + .debug_frame 0x00000fac 0x498 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o + .debug_frame 0x00001444 0x4e8 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o + .debug_frame 0x0000192c 0x14c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o + .debug_frame 0x00001a78 0xc38 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o + .debug_frame 0x000026b0 0x100 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o + .debug_frame 0x000027b0 0x4a4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o + .debug_frame 0x00002c54 0x21c ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o + .debug_frame 0x00002e70 0x3d0 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o + .debug_frame 0x00003240 0x9f4 ./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o + .debug_frame 0x00003c34 0x90 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_float.o) + .debug_frame 0x00003cc4 0x60 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf_i.o) + .debug_frame 0x00003d24 0x144 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-findfp.o) + .debug_frame 0x00003e68 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fwalk.o) + .debug_frame 0x00003e9c 0x6c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-printf.o) + .debug_frame 0x00003f08 0x7c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-snprintf.o) + .debug_frame 0x00003f84 0x88 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-stdio.o) + .debug_frame 0x0000400c 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memset.o) + .debug_frame 0x0000402c 0x40 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-localeconv.o) + .debug_frame 0x0000406c 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-closer.o) + .debug_frame 0x00004098 0x38 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reent.o) + .debug_frame 0x000040d0 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lseekr.o) + .debug_frame 0x000040fc 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-readr.o) + .debug_frame 0x00004128 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-writer.o) + .debug_frame 0x00004154 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-errno.o) + .debug_frame 0x00004174 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-init.o) + .debug_frame 0x000041a0 0xb0 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-lock.o) + .debug_frame 0x00004250 0x70 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-dtoa.o) + .debug_frame 0x000042c0 0x38 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-freer.o) + .debug_frame 0x000042f8 0x30 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-malloc.o) + .debug_frame 0x00004328 0x50 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mallocr.o) + .debug_frame 0x00004378 0x30 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mlock.o) + .debug_frame 0x000043a8 0x260 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mprec.o) + .debug_frame 0x00004608 0x90 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-svfprintf.o) + .debug_frame 0x00004698 0xa8 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-nano-vfprintf.o) + .debug_frame 0x00004740 0x5c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fflush.o) + .debug_frame 0x0000479c 0x40 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wbuf.o) + .debug_frame 0x000047dc 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wsetup.o) + .debug_frame 0x00004808 0x28 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memmove.o) + .debug_frame 0x00004830 0x48 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-locale.o) + .debug_frame 0x00004878 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-sbrkr.o) + .debug_frame 0x000048a4 0x28 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-memcpy-stub.o) + .debug_frame 0x000048cc 0x40 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-assert.o) + .debug_frame 0x0000490c 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-callocr.o) + .debug_frame 0x00004938 0x48 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-mbtowc_r.o) + .debug_frame 0x00004980 0x3c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-reallocr.o) + .debug_frame 0x000049bc 0x3c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-wctomb_r.o) + .debug_frame 0x000049f8 0x64 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fprintf.o) + .debug_frame 0x00004a5c 0x58 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-makebuf.o) + .debug_frame 0x00004ab4 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-fstatr.o) + .debug_frame 0x00004ae0 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-isattyr.o) + .debug_frame 0x00004b0c 0x28 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-abort.o) + .debug_frame 0x00004b34 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-msizer.o) + .debug_frame 0x00004b54 0xcc C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signal.o) + .debug_frame 0x00004c20 0x3c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libc_nano.a(libc_a-signalr.o) + .debug_frame 0x00004c5c 0x48 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_asin.o) + .debug_frame 0x00004ca4 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_atan2.o) + .debug_frame 0x00004cc4 0x48 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_pow.o) + .debug_frame 0x00004d0c 0x38 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-wf_sqrt.o) + .debug_frame 0x00004d44 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_fabs.o) + .debug_frame 0x00004d64 0x38 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_sin.o) + .debug_frame 0x00004d9c 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_finite.o) + .debug_frame 0x00004dbc 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_nan.o) + .debug_frame 0x00004ddc 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_sqrt.o) + .debug_frame 0x00004dfc 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_cos.o) + .debug_frame 0x00004e1c 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_sin.o) + .debug_frame 0x00004e3c 0x48 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_asin.o) + .debug_frame 0x00004e84 0x30 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_atan2.o) + .debug_frame 0x00004eb4 0x88 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_pow.o) + .debug_frame 0x00004f3c 0x38 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-ef_rem_pio2.o) + .debug_frame 0x00004f74 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_atan.o) + .debug_frame 0x00004fa0 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_scalbn.o) + .debug_frame 0x00004fc0 0x88 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-math_errf.o) + .debug_frame 0x00005048 0x5c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-kf_rem_pio2.o) + .debug_frame 0x000050a4 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/../../../../arm-none-eabi/lib/thumb/v7e-m+fp/hard\libm.a(libm_a-sf_floor.o) + .debug_frame 0x000050c4 0xac C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_addsubdf3.o) + .debug_frame 0x00005170 0x50 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_muldivdf3.o) + .debug_frame 0x000051c0 0xc4 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_cmpdf2.o) + .debug_frame 0x00005284 0x20 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_unorddf2.o) + .debug_frame 0x000052a4 0x24 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_arm_fixdfsi.o) + .debug_frame 0x000052c8 0x2c C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_aeabi_uldivmod.o) + .debug_frame 0x000052f4 0x34 C:/ST/STM32CubeIDE_1.18.0/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.13.3.rel1.win32_1.0.0.202411081344/tools/bin/../lib/gcc/arm-none-eabi/13.3.1/thumb/v7e-m+fp/hard\libgcc.a(_udivmoddi4.o) + +.debug_line_str + 0x00000000 0x63 + .debug_line_str + 0x00000000 0x63 ./Core/Startup/startup_stm32l452retxp.o diff --git a/Debug/objects.list b/Debug/objects.list new file mode 100644 index 0000000..cb34d81 --- /dev/null +++ b/Debug/objects.list @@ -0,0 +1,28 @@ +"./Core/Src/FusionAhrs.o" +"./Core/Src/icm20948.o" +"./Core/Src/lcd_i2c.o" +"./Core/Src/main.o" +"./Core/Src/moto_config.o" +"./Core/Src/stm32l4xx_hal_msp.o" +"./Core/Src/stm32l4xx_it.o" +"./Core/Src/syscalls.o" +"./Core/Src/sysmem.o" +"./Core/Src/system_stm32l4xx.o" +"./Core/Startup/startup_stm32l452retxp.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.o" +"./Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.o" diff --git a/Debug/objects.mk b/Debug/objects.mk new file mode 100644 index 0000000..b471e98 --- /dev/null +++ b/Debug/objects.mk @@ -0,0 +1,9 @@ +################################################################################ +# Automatically-generated file. Do not edit! +# Toolchain: GNU Tools for STM32 (13.3.rel1) +################################################################################ + +USER_OBJS := + +LIBS := + diff --git a/Debug/sources.mk b/Debug/sources.mk new file mode 100644 index 0000000..e88ca3b --- /dev/null +++ b/Debug/sources.mk @@ -0,0 +1,28 @@ +################################################################################ +# Automatically-generated file. Do not edit! +# Toolchain: GNU Tools for STM32 (13.3.rel1) +################################################################################ + +ELF_SRCS := +OBJ_SRCS := +S_SRCS := +C_SRCS := +S_UPPER_SRCS := +O_SRCS := +CYCLO_FILES := +SIZE_OUTPUT := +OBJDUMP_LIST := +SU_FILES := +EXECUTABLES := +OBJS := +MAP_FILES := +S_DEPS := +S_UPPER_DEPS := +C_DEPS := + +# Every subdirectory with source files must be described here +SUBDIRS := \ +Core/Src \ +Core/Startup \ +Drivers/STM32L4xx_HAL_Driver/Src \ + diff --git a/Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h b/Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h new file mode 100644 index 0000000..d8c221a --- /dev/null +++ b/Drivers/CMSIS/Device/ST/STM32L4xx/Include/stm32l452xx.h @@ -0,0 +1,16082 @@ +/** + ****************************************************************************** + * @file stm32l452xx.h + * @author MCD Application Team + * @brief CMSIS STM32L452xx Device Peripheral Access Layer Header File. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral's registers hardware + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32l452xx + * @{ + */ + +#ifndef __STM32L452xx_H +#define __STM32L452xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M4 Processor and Core Peripherals + */ +#define __CM4_REV 0x0001U /*!< Cortex-M4 revision r0p1 */ +#define __MPU_PRESENT 1U /*!< STM32L4XX provides an MPU */ +#define __NVIC_PRIO_BITS 4U /*!< STM32L4XX uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0U /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1U /*!< FPU present */ + +/** + * @} + */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32L4XX Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum +{ +/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Cortex-M4 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M4 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */ +/****** STM32 specific Interrupt Numbers **********************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_PVM_IRQn = 1, /*!< PVD/PVM1/PVM3/PVM4 through EXTI Line detection Interrupts */ + TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break interrupt and TIM15 global interrupt */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update Interrupt and TIM16 global interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + SDMMC1_IRQn = 49, /*!< SDMMC1 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ + DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ + DFSDM1_FLT0_IRQn = 61, /*!< DFSDM1 Filter 0 global Interrupt */ + DFSDM1_FLT1_IRQn = 62, /*!< DFSDM1 Filter 1 global Interrupt */ + COMP_IRQn = 64, /*!< COMP1 and COMP2 Interrupts */ + LPTIM1_IRQn = 65, /*!< LP TIM1 interrupt */ + LPTIM2_IRQn = 66, /*!< LP TIM2 interrupt */ + USB_IRQn = 67, /*!< USB event Interrupt */ + DMA2_Channel6_IRQn = 68, /*!< DMA2 Channel 6 global interrupt */ + DMA2_Channel7_IRQn = 69, /*!< DMA2 Channel 7 global interrupt */ + LPUART1_IRQn = 70, /*!< LP UART1 interrupt */ + QUADSPI_IRQn = 71, /*!< Quad SPI global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + SAI1_IRQn = 74, /*!< Serial Audio Interface 1 global interrupt */ + TSC_IRQn = 77, /*!< Touch Sense Controller global interrupt */ + RNG_IRQn = 80, /*!< RNG global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + CRS_IRQn = 82, /*!< CRS global interrupt */ + I2C4_EV_IRQn = 83, /*!< I2C4 Event interrupt */ + I2C4_ER_IRQn = 84 /*!< I2C4 Error interrupt */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */ +#include "system_stm32l4xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC interrupt and status register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< ADC configuration register 1, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR1; /*!< ADC sampling time register 1, Address offset: 0x14 */ + __IO uint32_t SMPR2; /*!< ADC sampling time register 2, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, 0x1C */ + __IO uint32_t TR1; /*!< ADC analog watchdog 1 threshold register, Address offset: 0x20 */ + __IO uint32_t TR2; /*!< ADC analog watchdog 2 threshold register, Address offset: 0x24 */ + __IO uint32_t TR3; /*!< ADC analog watchdog 3 threshold register, Address offset: 0x28 */ + uint32_t RESERVED2; /*!< Reserved, 0x2C */ + __IO uint32_t SQR1; /*!< ADC group regular sequencer register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC group regular sequencer register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC group regular sequencer register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC group regular sequencer register 4, Address offset: 0x3C */ + __IO uint32_t DR; /*!< ADC group regular data register, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, 0x44 */ + uint32_t RESERVED4; /*!< Reserved, 0x48 */ + __IO uint32_t JSQR; /*!< ADC group injected sequencer register, Address offset: 0x4C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x50 - 0x5C */ + __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ + __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ + __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ + __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ + uint32_t RESERVED6[4]; /*!< Reserved, 0x70 - 0x7C */ + __IO uint32_t JDR1; /*!< ADC group injected rank 1 data register, Address offset: 0x80 */ + __IO uint32_t JDR2; /*!< ADC group injected rank 2 data register, Address offset: 0x84 */ + __IO uint32_t JDR3; /*!< ADC group injected rank 3 data register, Address offset: 0x88 */ + __IO uint32_t JDR4; /*!< ADC group injected rank 4 data register, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ + __IO uint32_t AWD2CR; /*!< ADC analog watchdog 1 configuration register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC analog watchdog 3 Configuration Register, Address offset: 0xA4 */ + uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ + uint32_t RESERVED9; /*!< Reserved, 0x0AC */ + __IO uint32_t DIFSEL; /*!< ADC differential mode selection register, Address offset: 0xB0 */ + __IO uint32_t CALFACT; /*!< ADC calibration factors, Address offset: 0xB4 */ + +} ADC_TypeDef; + +typedef struct +{ + uint32_t RESERVED1; /*!< Reserved, Address offset: ADC1 base address + 0x300 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CCR; /*!< ADC common configuration register, Address offset: ADC1 base address + 0x308 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: ADC1 base address + 0x30C */ +} ADC_Common_TypeDef; + + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ + __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ + __IO uint32_t TDLR; /*!< CAN mailbox data low register */ + __IO uint32_t TDHR; /*!< CAN mailbox data high register */ +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ + __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ + __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ + __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ + __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ + __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ + __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ + __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ + __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ + __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ + __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ + uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ + CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ + uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ + __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ + __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ + uint32_t RESERVED2; /*!< Reserved, 0x208 */ + __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ + uint32_t RESERVED3; /*!< Reserved, 0x210 */ + __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ + uint32_t RESERVED4; /*!< Reserved, 0x218 */ + __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ + uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ + CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ +} CAN_TypeDef; + + +/** + * @brief Comparator + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */ +} COMP_Common_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Clock Recovery System + */ +typedef struct +{ +__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ +__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ +__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ +__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ + __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ + __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ + __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ + __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ + __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ + __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ +} DAC_TypeDef; + +/** + * @brief DFSDM module registers + */ +typedef struct +{ + __IO uint32_t FLTCR1; /*!< DFSDM control register1, Address offset: 0x100 */ + __IO uint32_t FLTCR2; /*!< DFSDM control register2, Address offset: 0x104 */ + __IO uint32_t FLTISR; /*!< DFSDM interrupt and status register, Address offset: 0x108 */ + __IO uint32_t FLTICR; /*!< DFSDM interrupt flag clear register, Address offset: 0x10C */ + __IO uint32_t FLTJCHGR; /*!< DFSDM injected channel group selection register, Address offset: 0x110 */ + __IO uint32_t FLTFCR; /*!< DFSDM filter control register, Address offset: 0x114 */ + __IO uint32_t FLTJDATAR; /*!< DFSDM data register for injected group, Address offset: 0x118 */ + __IO uint32_t FLTRDATAR; /*!< DFSDM data register for regular group, Address offset: 0x11C */ + __IO uint32_t FLTAWHTR; /*!< DFSDM analog watchdog high threshold register, Address offset: 0x120 */ + __IO uint32_t FLTAWLTR; /*!< DFSDM analog watchdog low threshold register, Address offset: 0x124 */ + __IO uint32_t FLTAWSR; /*!< DFSDM analog watchdog status register Address offset: 0x128 */ + __IO uint32_t FLTAWCFR; /*!< DFSDM analog watchdog clear flag register Address offset: 0x12C */ + __IO uint32_t FLTEXMAX; /*!< DFSDM extreme detector maximum register, Address offset: 0x130 */ + __IO uint32_t FLTEXMIN; /*!< DFSDM extreme detector minimum register Address offset: 0x134 */ + __IO uint32_t FLTCNVTIMR; /*!< DFSDM conversion timer, Address offset: 0x138 */ +} DFSDM_Filter_TypeDef; + +/** + * @brief DFSDM channel configuration registers + */ +typedef struct +{ + __IO uint32_t CHCFGR1; /*!< DFSDM channel configuration register1, Address offset: 0x00 */ + __IO uint32_t CHCFGR2; /*!< DFSDM channel configuration register2, Address offset: 0x04 */ + __IO uint32_t CHAWSCDR; /*!< DFSDM channel analog watchdog and + short circuit detector register, Address offset: 0x08 */ + __IO uint32_t CHWDATAR; /*!< DFSDM channel watchdog filter data register, Address offset: 0x0C */ + __IO uint32_t CHDATINR; /*!< DFSDM channel data input register, Address offset: 0x10 */ +} DFSDM_Channel_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZR1; /*!< Debug MCU APB1 freeze register 1, Address offset: 0x08 */ + __IO uint32_t APB1FZR2; /*!< Debug MCU APB1 freeze register 2, Address offset: 0x0C */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x10 */ +} DBGMCU_TypeDef; + + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} DMA_TypeDef; + +typedef struct +{ + __IO uint32_t CSELR; /*!< DMA channel selection register */ +} DMA_Request_TypeDef; + +/* Legacy define */ +#define DMA_request_TypeDef DMA_Request_TypeDef + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR1; /*!< EXTI Interrupt mask register 1, Address offset: 0x00 */ + __IO uint32_t EMR1; /*!< EXTI Event mask register 1, Address offset: 0x04 */ + __IO uint32_t RTSR1; /*!< EXTI Rising trigger selection register 1, Address offset: 0x08 */ + __IO uint32_t FTSR1; /*!< EXTI Falling trigger selection register 1, Address offset: 0x0C */ + __IO uint32_t SWIER1; /*!< EXTI Software interrupt event register 1, Address offset: 0x10 */ + __IO uint32_t PR1; /*!< EXTI Pending register 1, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved, 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1C */ + __IO uint32_t IMR2; /*!< EXTI Interrupt mask register 2, Address offset: 0x20 */ + __IO uint32_t EMR2; /*!< EXTI Event mask register 2, Address offset: 0x24 */ + __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register 2, Address offset: 0x28 */ + __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register 2, Address offset: 0x2C */ + __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register 2, Address offset: 0x30 */ + __IO uint32_t PR2; /*!< EXTI Pending register 2, Address offset: 0x34 */ +} EXTI_TypeDef; + + +/** + * @brief Firewall + */ + +typedef struct +{ + __IO uint32_t CSSA; /*!< Code Segment Start Address register, Address offset: 0x00 */ + __IO uint32_t CSL; /*!< Code Segment Length register, Address offset: 0x04 */ + __IO uint32_t NVDSSA; /*!< NON volatile data Segment Start Address register, Address offset: 0x08 */ + __IO uint32_t NVDSL; /*!< NON volatile data Segment Length register, Address offset: 0x0C */ + __IO uint32_t VDSSA ; /*!< Volatile data Segment Start Address register, Address offset: 0x10 */ + __IO uint32_t VDSL ; /*!< Volatile data Segment Length register, Address offset: 0x14 */ + uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved2, Address offset: 0x1C */ + __IO uint32_t CR ; /*!< Configuration register, Address offset: 0x20 */ +} FIREWALL_TypeDef; + + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ + __IO uint32_t PDKEYR; /*!< FLASH power down key register, Address offset: 0x04 */ + __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x08 */ + __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x10 */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x14 */ + __IO uint32_t ECCR; /*!< FLASH ECC register, Address offset: 0x18 */ + __IO uint32_t RESERVED1; /*!< Reserved1, Address offset: 0x1C */ + __IO uint32_t OPTR; /*!< FLASH option register, Address offset: 0x20 */ + __IO uint32_t PCROP1SR; /*!< FLASH bank1 PCROP start address register, Address offset: 0x24 */ + __IO uint32_t PCROP1ER; /*!< FLASH bank1 PCROP end address register, Address offset: 0x28 */ + __IO uint32_t WRP1AR; /*!< FLASH bank1 WRP area A address register, Address offset: 0x2C */ + __IO uint32_t WRP1BR; /*!< FLASH bank1 WRP area B address register, Address offset: 0x30 */ +} FLASH_TypeDef; + + + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ + __IO uint32_t BRR; /*!< GPIO Bit Reset register, Address offset: 0x28 */ + +} GPIO_TypeDef; + + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + +/** + * @brief LPTIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + __IO uint32_t OR; /*!< LPTIM Option register, Address offset: 0x20 */ +} LPTIM_TypeDef; + +/** + * @brief Operational Amplifier (OPAMP) + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< OPAMP control/status register, Address offset: 0x00 */ + __IO uint32_t OTR; /*!< OPAMP offset trimming register for normal mode, Address offset: 0x04 */ + __IO uint32_t LPOTR; /*!< OPAMP offset trimming register for low power mode, Address offset: 0x08 */ +} OPAMP_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< OPAMP control/status register, used for bits common to several OPAMP instances, Address offset: 0x00 */ +} OPAMP_Common_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< PWR power control register 3, Address offset: 0x08 */ + __IO uint32_t CR4; /*!< PWR power control register 4, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< PWR power status register 1, Address offset: 0x10 */ + __IO uint32_t SR2; /*!< PWR power status register 2, Address offset: 0x14 */ + __IO uint32_t SCR; /*!< PWR power status reset register, Address offset: 0x18 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t PUCRA; /*!< Pull_up control register of portA, Address offset: 0x20 */ + __IO uint32_t PDCRA; /*!< Pull_Down control register of portA, Address offset: 0x24 */ + __IO uint32_t PUCRB; /*!< Pull_up control register of portB, Address offset: 0x28 */ + __IO uint32_t PDCRB; /*!< Pull_Down control register of portB, Address offset: 0x2C */ + __IO uint32_t PUCRC; /*!< Pull_up control register of portC, Address offset: 0x30 */ + __IO uint32_t PDCRC; /*!< Pull_Down control register of portC, Address offset: 0x34 */ + __IO uint32_t PUCRD; /*!< Pull_up control register of portD, Address offset: 0x38 */ + __IO uint32_t PDCRD; /*!< Pull_Down control register of portD, Address offset: 0x3C */ + __IO uint32_t PUCRE; /*!< Pull_up control register of portE, Address offset: 0x40 */ + __IO uint32_t PDCRE; /*!< Pull_Down control register of portE, Address offset: 0x44 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x48 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x4C */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x50 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x54 */ + __IO uint32_t PUCRH; /*!< Pull_up control register of portH, Address offset: 0x58 */ + __IO uint32_t PDCRH; /*!< Pull_Down control register of portH, Address offset: 0x5C */ +} PWR_TypeDef; + + +/** + * @brief QUAD Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */ + __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */ + __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */ + __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */ + __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */ + __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */ + __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */ + __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */ + __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */ + __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */ +} QUADSPI_TypeDef; + + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t ICSCR; /*!< RCC internal clock sources calibration register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */ + __IO uint32_t PLLCFGR; /*!< RCC system PLL configuration register, Address offset: 0x0C */ + __IO uint32_t PLLSAI1CFGR; /*!< RCC PLL SAI1 configuration register, Address offset: 0x10 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CIER; /*!< RCC clock interrupt enable register, Address offset: 0x18 */ + __IO uint32_t CIFR; /*!< RCC clock interrupt flag register, Address offset: 0x1C */ + __IO uint32_t CICR; /*!< RCC clock interrupt clear register, Address offset: 0x20 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x28 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x2C */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x30 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x34 */ + __IO uint32_t APB1RSTR1; /*!< RCC APB1 peripheral reset register 1, Address offset: 0x38 */ + __IO uint32_t APB1RSTR2; /*!< RCC APB1 peripheral reset register 2, Address offset: 0x3C */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x40 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x44 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clocks enable register, Address offset: 0x48 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clocks enable register, Address offset: 0x4C */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clocks enable register, Address offset: 0x50 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x54 */ + __IO uint32_t APB1ENR1; /*!< RCC APB1 peripheral clocks enable register 1, Address offset: 0x58 */ + __IO uint32_t APB1ENR2; /*!< RCC APB1 peripheral clocks enable register 2, Address offset: 0x5C */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clocks enable register, Address offset: 0x60 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x64 */ + __IO uint32_t AHB1SMENR; /*!< RCC AHB1 peripheral clocks enable in sleep and stop modes register, Address offset: 0x68 */ + __IO uint32_t AHB2SMENR; /*!< RCC AHB2 peripheral clocks enable in sleep and stop modes register, Address offset: 0x6C */ + __IO uint32_t AHB3SMENR; /*!< RCC AHB3 peripheral clocks enable in sleep and stop modes register, Address offset: 0x70 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x74 */ + __IO uint32_t APB1SMENR1; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 1, Address offset: 0x78 */ + __IO uint32_t APB1SMENR2; /*!< RCC APB1 peripheral clocks enable in sleep mode and stop modes register 2, Address offset: 0x7C */ + __IO uint32_t APB2SMENR; /*!< RCC APB2 peripheral clocks enable in sleep mode and stop modes register, Address offset: 0x80 */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x84 */ + __IO uint32_t CCIPR; /*!< RCC peripherals independent clock configuration register, Address offset: 0x88 */ + uint32_t RESERVED7; /*!< Reserved, Address offset: 0x8C */ + __IO uint32_t BDCR; /*!< RCC backup domain control register, Address offset: 0x90 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x94 */ + __IO uint32_t CRRCR; /*!< RCC clock recovery RC register, Address offset: 0x98 */ + __IO uint32_t CCIPR2; /*!< RCC peripherals independent clock configuration register 2, Address offset: 0x9C */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t reserved; /*!< Reserved */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ + __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */ + __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */ + __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */ + __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */ + __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */ + __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */ + __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */ + __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */ + __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */ + __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */ + __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */ + __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */ +} RTC_TypeDef; + +/** + * @brief Serial Audio Interface + */ + +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + + +/** + * @brief Secure digital input/output Interface + */ + +typedef struct +{ + __IO uint32_t POWER; /*!< SDMMC power control register, Address offset: 0x00 */ + __IO uint32_t CLKCR; /*!< SDMMC clock control register, Address offset: 0x04 */ + __IO uint32_t ARG; /*!< SDMMC argument register, Address offset: 0x08 */ + __IO uint32_t CMD; /*!< SDMMC command register, Address offset: 0x0C */ + __I uint32_t RESPCMD; /*!< SDMMC command response register, Address offset: 0x10 */ + __I uint32_t RESP1; /*!< SDMMC response 1 register, Address offset: 0x14 */ + __I uint32_t RESP2; /*!< SDMMC response 2 register, Address offset: 0x18 */ + __I uint32_t RESP3; /*!< SDMMC response 3 register, Address offset: 0x1C */ + __I uint32_t RESP4; /*!< SDMMC response 4 register, Address offset: 0x20 */ + __IO uint32_t DTIMER; /*!< SDMMC data timer register, Address offset: 0x24 */ + __IO uint32_t DLEN; /*!< SDMMC data length register, Address offset: 0x28 */ + __IO uint32_t DCTRL; /*!< SDMMC data control register, Address offset: 0x2C */ + __I uint32_t DCOUNT; /*!< SDMMC data counter register, Address offset: 0x30 */ + __I uint32_t STA; /*!< SDMMC status register, Address offset: 0x34 */ + __IO uint32_t ICR; /*!< SDMMC interrupt clear register, Address offset: 0x38 */ + __IO uint32_t MASK; /*!< SDMMC mask register, Address offset: 0x3C */ + uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ + __I uint32_t FIFOCNT; /*!< SDMMC FIFO counter register, Address offset: 0x48 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ + __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset: 0x80 */ +} SDMMC_TypeDef; + + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< SPI Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register, Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI Rx CRC register, Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI Tx CRC register, Address offset: 0x18 */ +} SPI_TypeDef; + + +/** + * @brief System configuration controller + */ + +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ + __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + __IO uint32_t SCSR; /*!< SYSCFG SRAM2 control and status register, Address offset: 0x18 */ + __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x1C */ + __IO uint32_t SWPR; /*!< SYSCFG SRAM2 write protection register, Address offset: 0x20 */ + __IO uint32_t SKR; /*!< SYSCFG SRAM2 key register, Address offset: 0x24 */ +} SYSCFG_TypeDef; + + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR1; /*!< TIM option register 1, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t OR2; /*!< TIM option register 2, Address offset: 0x60 */ + __IO uint32_t OR3; /*!< TIM option register 3, Address offset: 0x64 */ +} TIM_TypeDef; + + +/** + * @brief Touch Sensing Controller (TSC) + */ + +typedef struct +{ + __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */ + __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */ + __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */ + __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */ + __IO uint32_t IOGXCR[7]; /*!< TSC I/O group x counter register, Address offset: 0x34-4C */ +} TSC_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint16_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + uint16_t RESERVED2; /*!< Reserved, 0x12 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint16_t RQR; /*!< USART Request register, Address offset: 0x18 */ + uint16_t RESERVED3; /*!< Reserved, 0x1A */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + uint16_t RESERVED4; /*!< Reserved, 0x26 */ + __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + uint16_t RESERVED5; /*!< Reserved, 0x2A */ +} USART_TypeDef; + +/** + * @brief Universal Serial Bus Full Speed Device + */ + +typedef struct +{ + __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */ + __IO uint16_t RESERVED0; /*!< Reserved */ + __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */ + __IO uint16_t RESERVED1; /*!< Reserved */ + __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */ + __IO uint16_t RESERVED2; /*!< Reserved */ + __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */ + __IO uint16_t RESERVED3; /*!< Reserved */ + __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */ + __IO uint16_t RESERVED4; /*!< Reserved */ + __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */ + __IO uint16_t RESERVED5; /*!< Reserved */ + __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */ + __IO uint16_t RESERVED6; /*!< Reserved */ + __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */ + __IO uint16_t RESERVED7[17]; /*!< Reserved */ + __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */ + __IO uint16_t RESERVED8; /*!< Reserved */ + __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ + __IO uint16_t RESERVED9; /*!< Reserved */ + __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */ + __IO uint16_t RESERVEDA; /*!< Reserved */ + __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */ + __IO uint16_t RESERVEDB; /*!< Reserved */ + __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */ + __IO uint16_t RESERVEDC; /*!< Reserved */ + __IO uint16_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */ + __IO uint16_t RESERVEDD; /*!< Reserved */ + __IO uint16_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */ + __IO uint16_t RESERVEDE; /*!< Reserved */ +} USB_TypeDef; + +/** + * @brief VREFBUF + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @brief RNG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define FLASH_BASE (0x08000000UL) /*!< FLASH(up to 512 KB) base address */ +#define FLASH_END (0x0807FFFFUL) /*!< FLASH END address */ +#define FLASH_BANK1_END (0x0807FFFFUL) /*!< FLASH END address of bank1 */ +#define SRAM1_BASE (0x20000000UL) /*!< SRAM1(up to 128 KB) base address */ +#define SRAM2_BASE (0x10000000UL) /*!< SRAM2(32 KB) base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ +#define QSPI_BASE (0x90000000UL) /*!< QUADSPI memories accessible over AHB base address */ + +#define QSPI_R_BASE (0xA0001000UL) /*!< QUADSPI control registers base address */ +#define SRAM1_BB_BASE (0x22000000UL) /*!< SRAM1(96 KB) base address in the bit-band region */ +#define PERIPH_BB_BASE (0x42000000UL) /*!< Peripheral base address in the bit-band region */ + +/* Legacy defines */ +#define SRAM_BASE SRAM1_BASE +#define SRAM_BB_BASE SRAM1_BB_BASE + +#define SRAM1_SIZE_MAX (0x00020000UL) /*!< maximum SRAM1 size (up to 128 KBytes) */ +#define SRAM2_SIZE (0x00008000UL) /*!< SRAM2 size (32 KBytes) */ + +#define FLASH_SIZE_DATA_REGISTER (0x1FFF75E0UL) + +#define FLASH_SIZE (((((*((uint32_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0000FFFFU)) == 0x0000FFFFU)) ? (0x200U << 10U) : \ + (((*((uint32_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0000FFFFU)) << 10U)) + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000UL) + + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000UL) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400UL) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000UL) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800UL) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00UL) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000UL) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00UL) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400UL) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800UL) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00UL) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800UL) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00UL) +#define CRS_BASE (APB1PERIPH_BASE + 0x6000UL) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400UL) +#define USB_BASE (APB1PERIPH_BASE + 0x6800UL) /*!< USB_IP Peripheral Registers base address */ +#define USB_PMAADDR (APB1PERIPH_BASE + 0x6C00UL) /*!< USB_IP Packet Memory Area base address */ +#define I2C4_BASE (APB1PERIPH_BASE + 0x8400UL) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000UL) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400UL) +#define DAC1_BASE (APB1PERIPH_BASE + 0x7400UL) +#define OPAMP_BASE (APB1PERIPH_BASE + 0x7800UL) +#define OPAMP1_BASE (APB1PERIPH_BASE + 0x7800UL) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x7C00UL) +#define LPUART1_BASE (APB1PERIPH_BASE + 0x8000UL) +#define LPTIM2_BASE (APB1PERIPH_BASE + 0x9400UL) + + +/*!< APB2 peripherals */ +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x0000UL) +#define VREFBUF_BASE (APB2PERIPH_BASE + 0x0030UL) +#define COMP1_BASE (APB2PERIPH_BASE + 0x0200UL) +#define COMP2_BASE (APB2PERIPH_BASE + 0x0204UL) +#define EXTI_BASE (APB2PERIPH_BASE + 0x0400UL) +#define FIREWALL_BASE (APB2PERIPH_BASE + 0x1C00UL) +#define SDMMC1_BASE (APB2PERIPH_BASE + 0x2800UL) +#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00UL) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000UL) +#define USART1_BASE (APB2PERIPH_BASE + 0x3800UL) +#define TIM15_BASE (APB2PERIPH_BASE + 0x4000UL) +#define TIM16_BASE (APB2PERIPH_BASE + 0x4400UL) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5400UL) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x0004UL) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x0024UL) +#define DFSDM1_BASE (APB2PERIPH_BASE + 0x6000UL) +#define DFSDM1_Channel0_BASE (DFSDM1_BASE + 0x0000UL) +#define DFSDM1_Channel1_BASE (DFSDM1_BASE + 0x0020UL) +#define DFSDM1_Channel2_BASE (DFSDM1_BASE + 0x0040UL) +#define DFSDM1_Channel3_BASE (DFSDM1_BASE + 0x0060UL) +#define DFSDM1_Filter0_BASE (DFSDM1_BASE + 0x0100UL) +#define DFSDM1_Filter1_BASE (DFSDM1_BASE + 0x0180UL) + +/*!< AHB1 peripherals */ +#define DMA1_BASE (AHB1PERIPH_BASE) +#define DMA2_BASE (AHB1PERIPH_BASE + 0x0400UL) +#define RCC_BASE (AHB1PERIPH_BASE + 0x1000UL) +#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x2000UL) +#define CRC_BASE (AHB1PERIPH_BASE + 0x3000UL) +#define TSC_BASE (AHB1PERIPH_BASE + 0x4000UL) + + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x0008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x0030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x0044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x0058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x0080UL) +#define DMA1_CSELR_BASE (DMA1_BASE + 0x00A8UL) + + +#define DMA2_Channel1_BASE (DMA2_BASE + 0x0008UL) +#define DMA2_Channel2_BASE (DMA2_BASE + 0x001CUL) +#define DMA2_Channel3_BASE (DMA2_BASE + 0x0030UL) +#define DMA2_Channel4_BASE (DMA2_BASE + 0x0044UL) +#define DMA2_Channel5_BASE (DMA2_BASE + 0x0058UL) +#define DMA2_Channel6_BASE (DMA2_BASE + 0x006CUL) +#define DMA2_Channel7_BASE (DMA2_BASE + 0x0080UL) +#define DMA2_CSELR_BASE (DMA2_BASE + 0x00A8UL) + + +/*!< AHB2 peripherals */ +#define GPIOA_BASE (AHB2PERIPH_BASE + 0x0000UL) +#define GPIOB_BASE (AHB2PERIPH_BASE + 0x0400UL) +#define GPIOC_BASE (AHB2PERIPH_BASE + 0x0800UL) +#define GPIOD_BASE (AHB2PERIPH_BASE + 0x0C00UL) +#define GPIOE_BASE (AHB2PERIPH_BASE + 0x1000UL) +#define GPIOH_BASE (AHB2PERIPH_BASE + 0x1C00UL) + + +#define ADC1_BASE (AHB2PERIPH_BASE + 0x08040000UL) +#define ADC1_COMMON_BASE (AHB2PERIPH_BASE + 0x08040300UL) + + +#define RNG_BASE (AHB2PERIPH_BASE + 0x08060800UL) + + + +/* Debug MCU registers base address */ +#define DBGMCU_BASE (0xE0042000UL) + + +#define PACKAGE_BASE (0x1FFF7500UL) /*!< Package data register base address */ +#define UID_BASE (0x1FFF7590UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x1FFF75E0UL) /*!< Flash size data register base address */ +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define CRS ((CRS_TypeDef *) CRS_BASE) +#define CAN ((CAN_TypeDef *) CAN1_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define USB ((USB_TypeDef *) USB_BASE) +#define I2C4 ((I2C_TypeDef *) I2C4_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC1_BASE) +#define DAC1 ((DAC_TypeDef *) DAC1_BASE) +#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE) +#define OPAMP1 ((OPAMP_TypeDef *) OPAMP1_BASE) +#define OPAMP1_COMMON ((OPAMP_Common_TypeDef *) OPAMP1_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) + +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define COMP1 ((COMP_TypeDef *) COMP1_BASE) +#define COMP2 ((COMP_TypeDef *) COMP2_BASE) +#define COMP12_COMMON ((COMP_Common_TypeDef *) COMP2_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define FIREWALL ((FIREWALL_TypeDef *) FIREWALL_BASE) +#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) +#define DFSDM1_Channel0 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel0_BASE) +#define DFSDM1_Channel1 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel1_BASE) +#define DFSDM1_Channel2 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel2_BASE) +#define DFSDM1_Channel3 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel3_BASE) +#define DFSDM1_Filter0 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter0_BASE) +#define DFSDM1_Filter1 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter1_BASE) +/* Aliases to keep compatibility after DFSDM renaming */ +#define DFSDM_Channel0 DFSDM1_Channel0 +#define DFSDM_Channel1 DFSDM1_Channel1 +#define DFSDM_Channel2 DFSDM1_Channel2 +#define DFSDM_Channel3 DFSDM1_Channel3 +#define DFSDM_Filter0 DFSDM1_Filter0 +#define DFSDM_Filter1 DFSDM1_Filter1 +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define TSC ((TSC_TypeDef *) TSC_BASE) + +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC1_COMMON ((ADC_Common_TypeDef *) ADC1_COMMON_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) + + +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMA1_CSELR ((DMA_Request_TypeDef *) DMA1_CSELR_BASE) + + +#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) +#define DMA2_Channel6 ((DMA_Channel_TypeDef *) DMA2_Channel6_BASE) +#define DMA2_Channel7 ((DMA_Channel_TypeDef *) DMA2_Channel7_BASE) +#define DMA2_CSELR ((DMA_Request_TypeDef *) DMA2_CSELR_BASE) + + + +#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE) + +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + +/** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 130U /*!< LSI Maximum startup time in us */ + +/** + * @} + */ + +/** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ + +/* + * @brief Specific device feature definitions (not present on all devices in the STM32L4 series) + */ +/* Note: No specific macro feature on this device */ + +/******************** Bit definition for ADC_ISR register *******************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC ready flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC group regular end of sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC group regular end of unitary conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC group regular overrun flag */ +#define ADC_ISR_JEOC_Pos (5U) +#define ADC_ISR_JEOC_Msk (0x1UL << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */ +#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC group injected end of unitary conversion flag */ +#define ADC_ISR_JEOS_Pos (6U) +#define ADC_ISR_JEOS_Msk (0x1UL << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */ +#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC analog watchdog 3 flag */ +#define ADC_ISR_JQOVF_Pos (10U) +#define ADC_ISR_JQOVF_Msk (0x1UL << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */ +#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC group injected contexts queue overflow flag */ + +/******************** Bit definition for ADC_IER register *******************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC ready interrupt */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC group regular end of sampling interrupt */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC group regular end of unitary conversion interrupt */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC group regular overrun interrupt */ +#define ADC_IER_JEOCIE_Pos (5U) +#define ADC_IER_JEOCIE_Msk (0x1UL << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */ +#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC group injected end of unitary conversion interrupt */ +#define ADC_IER_JEOSIE_Pos (6U) +#define ADC_IER_JEOSIE_Msk (0x1UL << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */ +#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC analog watchdog 1 interrupt */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC analog watchdog 2 interrupt */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC analog watchdog 3 interrupt */ +#define ADC_IER_JQOVFIE_Pos (10U) +#define ADC_IER_JQOVFIE_Msk (0x1UL << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */ +#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC group injected contexts queue overflow interrupt */ + +/* Legacy defines */ +#define ADC_IER_ADRDY (ADC_IER_ADRDYIE) +#define ADC_IER_EOSMP (ADC_IER_EOSMPIE) +#define ADC_IER_EOC (ADC_IER_EOCIE) +#define ADC_IER_EOS (ADC_IER_EOSIE) +#define ADC_IER_OVR (ADC_IER_OVRIE) +#define ADC_IER_JEOC (ADC_IER_JEOCIE) +#define ADC_IER_JEOS (ADC_IER_JEOSIE) +#define ADC_IER_AWD1 (ADC_IER_AWD1IE) +#define ADC_IER_AWD2 (ADC_IER_AWD2IE) +#define ADC_IER_AWD3 (ADC_IER_AWD3IE) +#define ADC_IER_JQOVF (ADC_IER_JQOVFIE) + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC enable */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC disable */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC group regular conversion start */ +#define ADC_CR_JADSTART_Pos (3U) +#define ADC_CR_JADSTART_Msk (0x1UL << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */ +#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC group injected conversion start */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC group regular conversion stop */ +#define ADC_CR_JADSTP_Pos (5U) +#define ADC_CR_JADSTP_Msk (0x1UL << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */ +#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC group injected conversion stop */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC voltage regulator enable */ +#define ADC_CR_DEEPPWD_Pos (29U) +#define ADC_CR_DEEPPWD_Msk (0x1UL << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */ +#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC deep power down enable */ +#define ADC_CR_ADCALDIF_Pos (30U) +#define ADC_CR_ADCALDIF_Msk (0x1UL << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */ +#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC differential mode for calibration */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC calibration */ + +/******************** Bit definition for ADC_CFGR register ******************/ +#define ADC_CFGR_DMAEN_Pos (0U) +#define ADC_CFGR_DMAEN_Msk (0x1UL << ADC_CFGR_DMAEN_Pos) /*!< 0x00000001 */ +#define ADC_CFGR_DMAEN ADC_CFGR_DMAEN_Msk /*!< ADC DMA transfer enable */ +#define ADC_CFGR_DMACFG_Pos (1U) +#define ADC_CFGR_DMACFG_Msk (0x1UL << ADC_CFGR_DMACFG_Pos) /*!< 0x00000002 */ +#define ADC_CFGR_DMACFG ADC_CFGR_DMACFG_Msk /*!< ADC DMA transfer configuration */ + +#define ADC_CFGR_DFSDMCFG_Pos (2U) +#define ADC_CFGR_DFSDMCFG_Msk (0x1UL << ADC_CFGR_DFSDMCFG_Pos) /*!< 0x00000004 */ +#define ADC_CFGR_DFSDMCFG ADC_CFGR_DFSDMCFG_Msk /*!< ADC DFSDM mode configuration */ + +#define ADC_CFGR_RES_Pos (3U) +#define ADC_CFGR_RES_Msk (0x3UL << ADC_CFGR_RES_Pos) /*!< 0x00000018 */ +#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC data resolution */ +#define ADC_CFGR_RES_0 (0x1UL << ADC_CFGR_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR_RES_1 (0x2UL << ADC_CFGR_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR_ALIGN_Pos (5U) +#define ADC_CFGR_ALIGN_Msk (0x1UL << ADC_CFGR_ALIGN_Pos) /*!< 0x00000020 */ +#define ADC_CFGR_ALIGN ADC_CFGR_ALIGN_Msk /*!< ADC data alignment */ + +#define ADC_CFGR_EXTSEL_Pos (6U) +#define ADC_CFGR_EXTSEL_Msk (0xFUL << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003C0 */ +#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC group regular external trigger source */ +#define ADC_CFGR_EXTSEL_0 (0x1UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR_EXTSEL_1 (0x2UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR_EXTSEL_2 (0x4UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */ +#define ADC_CFGR_EXTSEL_3 (0x8UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */ + +#define ADC_CFGR_EXTEN_Pos (10U) +#define ADC_CFGR_EXTEN_Msk (0x3UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC group regular external trigger polarity */ +#define ADC_CFGR_EXTEN_0 (0x1UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR_EXTEN_1 (0x2UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR_OVRMOD_Pos (12U) +#define ADC_CFGR_OVRMOD_Msk (0x1UL << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC group regular overrun configuration */ +#define ADC_CFGR_CONT_Pos (13U) +#define ADC_CFGR_CONT_Msk (0x1UL << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC group regular continuous conversion mode */ +#define ADC_CFGR_AUTDLY_Pos (14U) +#define ADC_CFGR_AUTDLY_Msk (0x1UL << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */ +#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC low power auto wait */ + +#define ADC_CFGR_DISCEN_Pos (16U) +#define ADC_CFGR_DISCEN_Msk (0x1UL << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ + +#define ADC_CFGR_DISCNUM_Pos (17U) +#define ADC_CFGR_DISCNUM_Msk (0x7UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */ +#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ +#define ADC_CFGR_DISCNUM_0 (0x1UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */ +#define ADC_CFGR_DISCNUM_1 (0x2UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */ +#define ADC_CFGR_DISCNUM_2 (0x4UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */ + +#define ADC_CFGR_JDISCEN_Pos (20U) +#define ADC_CFGR_JDISCEN_Msk (0x1UL << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */ +#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ +#define ADC_CFGR_JQM_Pos (21U) +#define ADC_CFGR_JQM_Msk (0x1UL << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */ +#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC group injected contexts queue mode */ +#define ADC_CFGR_AWD1SGL_Pos (22U) +#define ADC_CFGR_AWD1SGL_Msk (0x1UL << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ +#define ADC_CFGR_AWD1EN_Pos (23U) +#define ADC_CFGR_AWD1EN_Msk (0x1UL << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ +#define ADC_CFGR_JAWD1EN_Pos (24U) +#define ADC_CFGR_JAWD1EN_Msk (0x1UL << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */ +#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ +#define ADC_CFGR_JAUTO_Pos (25U) +#define ADC_CFGR_JAUTO_Msk (0x1UL << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */ +#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ + +#define ADC_CFGR_AWD1CH_Pos (26U) +#define ADC_CFGR_AWD1CH_Msk (0x1FUL << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ +#define ADC_CFGR_AWD1CH_0 (0x01UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR_AWD1CH_1 (0x02UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR_AWD1CH_2 (0x04UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR_AWD1CH_3 (0x08UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR_AWD1CH_4 (0x10UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */ + +#define ADC_CFGR_JQDIS_Pos (31U) +#define ADC_CFGR_JQDIS_Msk (0x1UL << ADC_CFGR_JQDIS_Pos) /*!< 0x80000000 */ +#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC group injected contexts queue disable */ + +/******************** Bit definition for ADC_CFGR2 register *****************/ +#define ADC_CFGR2_ROVSE_Pos (0U) +#define ADC_CFGR2_ROVSE_Msk (0x1UL << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC oversampler enable on scope ADC group regular */ +#define ADC_CFGR2_JOVSE_Pos (1U) +#define ADC_CFGR2_JOVSE_Msk (0x1UL << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */ +#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC oversampler enable on scope ADC group injected */ + +#define ADC_CFGR2_OVSR_Pos (2U) +#define ADC_CFGR2_OVSR_Msk (0x7UL << ADC_CFGR2_OVSR_Pos) /*!< 0x0000001C */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling ratio */ +#define ADC_CFGR2_OVSR_0 (0x1UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000004 */ +#define ADC_CFGR2_OVSR_1 (0x2UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000008 */ +#define ADC_CFGR2_OVSR_2 (0x4UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TROVS_Pos (9U) +#define ADC_CFGR2_TROVS_Msk (0x1UL << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC oversampling discontinuous mode (triggered mode) for ADC group regular */ +#define ADC_CFGR2_ROVSM_Pos (10U) +#define ADC_CFGR2_ROVSM_Msk (0x1UL << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */ +#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC oversampling mode managing interlaced conversions of ADC group regular and group injected */ + +/******************** Bit definition for ADC_SMPR1 register *****************/ +#define ADC_SMPR1_SMP0_Pos (0U) +#define ADC_SMPR1_SMP0_Msk (0x7UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC channel 0 sampling time selection */ +#define ADC_SMPR1_SMP0_0 (0x1UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP0_1 (0x2UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP0_2 (0x4UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP1_Pos (3U) +#define ADC_SMPR1_SMP1_Msk (0x7UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC channel 1 sampling time selection */ +#define ADC_SMPR1_SMP1_0 (0x1UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP1_1 (0x2UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP1_2 (0x4UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP2_Pos (6U) +#define ADC_SMPR1_SMP2_Msk (0x7UL << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC channel 2 sampling time selection */ +#define ADC_SMPR1_SMP2_0 (0x1UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP2_1 (0x2UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP2_2 (0x4UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP3_Pos (9U) +#define ADC_SMPR1_SMP3_Msk (0x7UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC channel 3 sampling time selection */ +#define ADC_SMPR1_SMP3_0 (0x1UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP3_1 (0x2UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP3_2 (0x4UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP4_Pos (12U) +#define ADC_SMPR1_SMP4_Msk (0x7UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC channel 4 sampling time selection */ +#define ADC_SMPR1_SMP4_0 (0x1UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP4_1 (0x2UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP4_2 (0x4UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP5_Pos (15U) +#define ADC_SMPR1_SMP5_Msk (0x7UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC channel 5 sampling time selection */ +#define ADC_SMPR1_SMP5_0 (0x1UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP5_1 (0x2UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP5_2 (0x4UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP6_Pos (18U) +#define ADC_SMPR1_SMP6_Msk (0x7UL << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC channel 6 sampling time selection */ +#define ADC_SMPR1_SMP6_0 (0x1UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP6_1 (0x2UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP6_2 (0x4UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP7_Pos (21U) +#define ADC_SMPR1_SMP7_Msk (0x7UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC channel 7 sampling time selection */ +#define ADC_SMPR1_SMP7_0 (0x1UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP7_1 (0x2UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP7_2 (0x4UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR1_SMP8_Pos (24U) +#define ADC_SMPR1_SMP8_Msk (0x7UL << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC channel 8 sampling time selection */ +#define ADC_SMPR1_SMP8_0 (0x1UL << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR1_SMP8_1 (0x2UL << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR1_SMP8_2 (0x4UL << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR1_SMP9_Pos (27U) +#define ADC_SMPR1_SMP9_Msk (0x7UL << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC channel 9 sampling time selection */ +#define ADC_SMPR1_SMP9_0 (0x1UL << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR1_SMP9_1 (0x2UL << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR1_SMP9_2 (0x4UL << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */ + +#define ADC_SMPR1_SMPPLUS_Pos (31U) +#define ADC_SMPR1_SMPPLUS_Msk (0x1UL << ADC_SMPR1_SMPPLUS_Pos) /*!< 0x80000000 */ +#define ADC_SMPR1_SMPPLUS ADC_SMPR1_SMPPLUS_Msk /*!< ADC channels sampling time additional setting */ + +/******************** Bit definition for ADC_SMPR2 register *****************/ +#define ADC_SMPR2_SMP10_Pos (0U) +#define ADC_SMPR2_SMP10_Msk (0x7UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC channel 10 sampling time selection */ +#define ADC_SMPR2_SMP10_0 (0x1UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP10_1 (0x2UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP10_2 (0x4UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP11_Pos (3U) +#define ADC_SMPR2_SMP11_Msk (0x7UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC channel 11 sampling time selection */ +#define ADC_SMPR2_SMP11_0 (0x1UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP11_1 (0x2UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP11_2 (0x4UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP12_Pos (6U) +#define ADC_SMPR2_SMP12_Msk (0x7UL << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC channel 12 sampling time selection */ +#define ADC_SMPR2_SMP12_0 (0x1UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP12_1 (0x2UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP12_2 (0x4UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP13_Pos (9U) +#define ADC_SMPR2_SMP13_Msk (0x7UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC channel 13 sampling time selection */ +#define ADC_SMPR2_SMP13_0 (0x1UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP13_1 (0x2UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP13_2 (0x4UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP14_Pos (12U) +#define ADC_SMPR2_SMP14_Msk (0x7UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC channel 14 sampling time selection */ +#define ADC_SMPR2_SMP14_0 (0x1UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP14_1 (0x2UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP14_2 (0x4UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP15_Pos (15U) +#define ADC_SMPR2_SMP15_Msk (0x7UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC channel 15 sampling time selection */ +#define ADC_SMPR2_SMP15_0 (0x1UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP15_1 (0x2UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP15_2 (0x4UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP16_Pos (18U) +#define ADC_SMPR2_SMP16_Msk (0x7UL << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC channel 16 sampling time selection */ +#define ADC_SMPR2_SMP16_0 (0x1UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP16_1 (0x2UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP16_2 (0x4UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP17_Pos (21U) +#define ADC_SMPR2_SMP17_Msk (0x7UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC channel 17 sampling time selection */ +#define ADC_SMPR2_SMP17_0 (0x1UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP17_1 (0x2UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP17_2 (0x4UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP18_Pos (24U) +#define ADC_SMPR2_SMP18_Msk (0x7UL << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC channel 18 sampling time selection */ +#define ADC_SMPR2_SMP18_0 (0x1UL << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP18_1 (0x2UL << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP18_2 (0x4UL << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */ + +/******************** Bit definition for ADC_TR1 register *******************/ +#define ADC_TR1_LT1_Pos (0U) +#define ADC_TR1_LT1_Msk (0xFFFUL << ADC_TR1_LT1_Pos) /*!< 0x00000FFF */ +#define ADC_TR1_LT1 ADC_TR1_LT1_Msk /*!< ADC analog watchdog 1 threshold low */ +#define ADC_TR1_LT1_0 (0x001UL << ADC_TR1_LT1_Pos) /*!< 0x00000001 */ +#define ADC_TR1_LT1_1 (0x002UL << ADC_TR1_LT1_Pos) /*!< 0x00000002 */ +#define ADC_TR1_LT1_2 (0x004UL << ADC_TR1_LT1_Pos) /*!< 0x00000004 */ +#define ADC_TR1_LT1_3 (0x008UL << ADC_TR1_LT1_Pos) /*!< 0x00000008 */ +#define ADC_TR1_LT1_4 (0x010UL << ADC_TR1_LT1_Pos) /*!< 0x00000010 */ +#define ADC_TR1_LT1_5 (0x020UL << ADC_TR1_LT1_Pos) /*!< 0x00000020 */ +#define ADC_TR1_LT1_6 (0x040UL << ADC_TR1_LT1_Pos) /*!< 0x00000040 */ +#define ADC_TR1_LT1_7 (0x080UL << ADC_TR1_LT1_Pos) /*!< 0x00000080 */ +#define ADC_TR1_LT1_8 (0x100UL << ADC_TR1_LT1_Pos) /*!< 0x00000100 */ +#define ADC_TR1_LT1_9 (0x200UL << ADC_TR1_LT1_Pos) /*!< 0x00000200 */ +#define ADC_TR1_LT1_10 (0x400UL << ADC_TR1_LT1_Pos) /*!< 0x00000400 */ +#define ADC_TR1_LT1_11 (0x800UL << ADC_TR1_LT1_Pos) /*!< 0x00000800 */ + +#define ADC_TR1_HT1_Pos (16U) +#define ADC_TR1_HT1_Msk (0xFFFUL << ADC_TR1_HT1_Pos) /*!< 0x0FFF0000 */ +#define ADC_TR1_HT1 ADC_TR1_HT1_Msk /*!< ADC Analog watchdog 1 threshold high */ +#define ADC_TR1_HT1_0 (0x001UL << ADC_TR1_HT1_Pos) /*!< 0x00010000 */ +#define ADC_TR1_HT1_1 (0x002UL << ADC_TR1_HT1_Pos) /*!< 0x00020000 */ +#define ADC_TR1_HT1_2 (0x004UL << ADC_TR1_HT1_Pos) /*!< 0x00040000 */ +#define ADC_TR1_HT1_3 (0x008UL << ADC_TR1_HT1_Pos) /*!< 0x00080000 */ +#define ADC_TR1_HT1_4 (0x010UL << ADC_TR1_HT1_Pos) /*!< 0x00100000 */ +#define ADC_TR1_HT1_5 (0x020UL << ADC_TR1_HT1_Pos) /*!< 0x00200000 */ +#define ADC_TR1_HT1_6 (0x040UL << ADC_TR1_HT1_Pos) /*!< 0x00400000 */ +#define ADC_TR1_HT1_7 (0x080UL << ADC_TR1_HT1_Pos) /*!< 0x00800000 */ +#define ADC_TR1_HT1_8 (0x100UL << ADC_TR1_HT1_Pos) /*!< 0x01000000 */ +#define ADC_TR1_HT1_9 (0x200UL << ADC_TR1_HT1_Pos) /*!< 0x02000000 */ +#define ADC_TR1_HT1_10 (0x400UL << ADC_TR1_HT1_Pos) /*!< 0x04000000 */ +#define ADC_TR1_HT1_11 (0x800UL << ADC_TR1_HT1_Pos) /*!< 0x08000000 */ + +/******************** Bit definition for ADC_TR2 register *******************/ +#define ADC_TR2_LT2_Pos (0U) +#define ADC_TR2_LT2_Msk (0xFFUL << ADC_TR2_LT2_Pos) /*!< 0x000000FF */ +#define ADC_TR2_LT2 ADC_TR2_LT2_Msk /*!< ADC analog watchdog 2 threshold low */ +#define ADC_TR2_LT2_0 (0x01UL << ADC_TR2_LT2_Pos) /*!< 0x00000001 */ +#define ADC_TR2_LT2_1 (0x02UL << ADC_TR2_LT2_Pos) /*!< 0x00000002 */ +#define ADC_TR2_LT2_2 (0x04UL << ADC_TR2_LT2_Pos) /*!< 0x00000004 */ +#define ADC_TR2_LT2_3 (0x08UL << ADC_TR2_LT2_Pos) /*!< 0x00000008 */ +#define ADC_TR2_LT2_4 (0x10UL << ADC_TR2_LT2_Pos) /*!< 0x00000010 */ +#define ADC_TR2_LT2_5 (0x20UL << ADC_TR2_LT2_Pos) /*!< 0x00000020 */ +#define ADC_TR2_LT2_6 (0x40UL << ADC_TR2_LT2_Pos) /*!< 0x00000040 */ +#define ADC_TR2_LT2_7 (0x80UL << ADC_TR2_LT2_Pos) /*!< 0x00000080 */ + +#define ADC_TR2_HT2_Pos (16U) +#define ADC_TR2_HT2_Msk (0xFFUL << ADC_TR2_HT2_Pos) /*!< 0x00FF0000 */ +#define ADC_TR2_HT2 ADC_TR2_HT2_Msk /*!< ADC analog watchdog 2 threshold high */ +#define ADC_TR2_HT2_0 (0x01UL << ADC_TR2_HT2_Pos) /*!< 0x00010000 */ +#define ADC_TR2_HT2_1 (0x02UL << ADC_TR2_HT2_Pos) /*!< 0x00020000 */ +#define ADC_TR2_HT2_2 (0x04UL << ADC_TR2_HT2_Pos) /*!< 0x00040000 */ +#define ADC_TR2_HT2_3 (0x08UL << ADC_TR2_HT2_Pos) /*!< 0x00080000 */ +#define ADC_TR2_HT2_4 (0x10UL << ADC_TR2_HT2_Pos) /*!< 0x00100000 */ +#define ADC_TR2_HT2_5 (0x20UL << ADC_TR2_HT2_Pos) /*!< 0x00200000 */ +#define ADC_TR2_HT2_6 (0x40UL << ADC_TR2_HT2_Pos) /*!< 0x00400000 */ +#define ADC_TR2_HT2_7 (0x80UL << ADC_TR2_HT2_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for ADC_TR3 register *******************/ +#define ADC_TR3_LT3_Pos (0U) +#define ADC_TR3_LT3_Msk (0xFFUL << ADC_TR3_LT3_Pos) /*!< 0x000000FF */ +#define ADC_TR3_LT3 ADC_TR3_LT3_Msk /*!< ADC analog watchdog 3 threshold low */ +#define ADC_TR3_LT3_0 (0x01UL << ADC_TR3_LT3_Pos) /*!< 0x00000001 */ +#define ADC_TR3_LT3_1 (0x02UL << ADC_TR3_LT3_Pos) /*!< 0x00000002 */ +#define ADC_TR3_LT3_2 (0x04UL << ADC_TR3_LT3_Pos) /*!< 0x00000004 */ +#define ADC_TR3_LT3_3 (0x08UL << ADC_TR3_LT3_Pos) /*!< 0x00000008 */ +#define ADC_TR3_LT3_4 (0x10UL << ADC_TR3_LT3_Pos) /*!< 0x00000010 */ +#define ADC_TR3_LT3_5 (0x20UL << ADC_TR3_LT3_Pos) /*!< 0x00000020 */ +#define ADC_TR3_LT3_6 (0x40UL << ADC_TR3_LT3_Pos) /*!< 0x00000040 */ +#define ADC_TR3_LT3_7 (0x80UL << ADC_TR3_LT3_Pos) /*!< 0x00000080 */ + +#define ADC_TR3_HT3_Pos (16U) +#define ADC_TR3_HT3_Msk (0xFFUL << ADC_TR3_HT3_Pos) /*!< 0x00FF0000 */ +#define ADC_TR3_HT3 ADC_TR3_HT3_Msk /*!< ADC analog watchdog 3 threshold high */ +#define ADC_TR3_HT3_0 (0x01UL << ADC_TR3_HT3_Pos) /*!< 0x00010000 */ +#define ADC_TR3_HT3_1 (0x02UL << ADC_TR3_HT3_Pos) /*!< 0x00020000 */ +#define ADC_TR3_HT3_2 (0x04UL << ADC_TR3_HT3_Pos) /*!< 0x00040000 */ +#define ADC_TR3_HT3_3 (0x08UL << ADC_TR3_HT3_Pos) /*!< 0x00080000 */ +#define ADC_TR3_HT3_4 (0x10UL << ADC_TR3_HT3_Pos) /*!< 0x00100000 */ +#define ADC_TR3_HT3_5 (0x20UL << ADC_TR3_HT3_Pos) /*!< 0x00200000 */ +#define ADC_TR3_HT3_6 (0x40UL << ADC_TR3_HT3_Pos) /*!< 0x00400000 */ +#define ADC_TR3_HT3_7 (0x80UL << ADC_TR3_HT3_Pos) /*!< 0x00800000 */ + +/******************** Bit definition for ADC_SQR1 register ******************/ +#define ADC_SQR1_L_Pos (0U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x0000000F */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00000008 */ + +#define ADC_SQR1_SQ1_Pos (6U) +#define ADC_SQR1_SQ1_Msk (0x1FUL << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */ +#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ +#define ADC_SQR1_SQ1_0 (0x01UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ1_1 (0x02UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ1_2 (0x04UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ1_3 (0x08UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */ +#define ADC_SQR1_SQ1_4 (0x10UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */ + +#define ADC_SQR1_SQ2_Pos (12U) +#define ADC_SQR1_SQ2_Msk (0x1FUL << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */ +#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ +#define ADC_SQR1_SQ2_0 (0x01UL << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ2_1 (0x02UL << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ2_2 (0x04UL << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */ +#define ADC_SQR1_SQ2_3 (0x08UL << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ2_4 (0x10UL << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */ + +#define ADC_SQR1_SQ3_Pos (18U) +#define ADC_SQR1_SQ3_Msk (0x1FUL << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */ +#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ +#define ADC_SQR1_SQ3_0 (0x01UL << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ3_1 (0x02UL << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */ +#define ADC_SQR1_SQ3_2 (0x04UL << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_SQ3_3 (0x08UL << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_SQ3_4 (0x10UL << ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */ + +#define ADC_SQR1_SQ4_Pos (24U) +#define ADC_SQR1_SQ4_Msk (0x1FUL << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */ +#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ +#define ADC_SQR1_SQ4_0 (0x01UL << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */ +#define ADC_SQR1_SQ4_1 (0x02UL << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */ +#define ADC_SQR1_SQ4_2 (0x04UL << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */ +#define ADC_SQR1_SQ4_3 (0x08UL << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */ +#define ADC_SQR1_SQ4_4 (0x10UL << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR2 register ******************/ +#define ADC_SQR2_SQ5_Pos (0U) +#define ADC_SQR2_SQ5_Msk (0x1FUL << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ +#define ADC_SQR2_SQ5_0 (0x01UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ5_1 (0x02UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ5_2 (0x04UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ5_3 (0x08UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ5_4 (0x10UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ6_Pos (6U) +#define ADC_SQR2_SQ6_Msk (0x1FUL << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */ +#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ +#define ADC_SQR2_SQ6_0 (0x01UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ6_1 (0x02UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ6_2 (0x04UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ6_3 (0x08UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */ +#define ADC_SQR2_SQ6_4 (0x10UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */ + +#define ADC_SQR2_SQ7_Pos (12U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */ + +#define ADC_SQR2_SQ8_Pos (18U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */ + +#define ADC_SQR2_SQ9_Pos (24U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR3 register ******************/ +#define ADC_SQR3_SQ10_Pos (0U) +#define ADC_SQR3_SQ10_Msk (0x1FUL << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ +#define ADC_SQR3_SQ10_0 (0x01UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ10_1 (0x02UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ10_2 (0x04UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ10_3 (0x08UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ10_4 (0x10UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ11_Pos (6U) +#define ADC_SQR3_SQ11_Msk (0x1FUL << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */ +#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC group regular sequencer rank 11 */ +#define ADC_SQR3_SQ11_0 (0x01UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ11_1 (0x02UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ11_2 (0x04UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ11_3 (0x08UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */ +#define ADC_SQR3_SQ11_4 (0x10UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */ + +#define ADC_SQR3_SQ12_Pos (12U) +#define ADC_SQR3_SQ12_Msk (0x1FUL << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */ +#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ +#define ADC_SQR3_SQ12_0 (0x01UL << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ12_1 (0x02UL << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ12_2 (0x04UL << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */ +#define ADC_SQR3_SQ12_3 (0x08UL << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ12_4 (0x10UL << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */ + +#define ADC_SQR3_SQ13_Pos (18U) +#define ADC_SQR3_SQ13_Msk (0x1FUL << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */ +#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ +#define ADC_SQR3_SQ13_0 (0x01UL << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ13_1 (0x02UL << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */ +#define ADC_SQR3_SQ13_2 (0x04UL << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ13_3 (0x08UL << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ13_4 (0x10UL << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */ + +#define ADC_SQR3_SQ14_Pos (24U) +#define ADC_SQR3_SQ14_Msk (0x1FUL << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */ +#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ +#define ADC_SQR3_SQ14_0 (0x01UL << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */ +#define ADC_SQR3_SQ14_1 (0x02UL << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ14_2 (0x04UL << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ14_3 (0x08UL << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ14_4 (0x10UL << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR4 register ******************/ +#define ADC_SQR4_SQ15_Pos (0U) +#define ADC_SQR4_SQ15_Msk (0x1FUL << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */ +#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ +#define ADC_SQR4_SQ15_0 (0x01UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */ +#define ADC_SQR4_SQ15_1 (0x02UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */ +#define ADC_SQR4_SQ15_2 (0x04UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */ +#define ADC_SQR4_SQ15_3 (0x08UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */ +#define ADC_SQR4_SQ15_4 (0x10UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */ + +#define ADC_SQR4_SQ16_Pos (6U) +#define ADC_SQR4_SQ16_Msk (0x1FUL << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */ +#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ +#define ADC_SQR4_SQ16_0 (0x01UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */ +#define ADC_SQR4_SQ16_1 (0x02UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */ +#define ADC_SQR4_SQ16_2 (0x04UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */ +#define ADC_SQR4_SQ16_3 (0x08UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */ +#define ADC_SQR4_SQ16_4 (0x10UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_RDATA_Pos (0U) +#define ADC_DR_RDATA_Msk (0xFFFFUL << ADC_DR_RDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC group regular conversion data */ +#define ADC_DR_RDATA_0 (0x0001UL << ADC_DR_RDATA_Pos) /*!< 0x00000001 */ +#define ADC_DR_RDATA_1 (0x0002UL << ADC_DR_RDATA_Pos) /*!< 0x00000002 */ +#define ADC_DR_RDATA_2 (0x0004UL << ADC_DR_RDATA_Pos) /*!< 0x00000004 */ +#define ADC_DR_RDATA_3 (0x0008UL << ADC_DR_RDATA_Pos) /*!< 0x00000008 */ +#define ADC_DR_RDATA_4 (0x0010UL << ADC_DR_RDATA_Pos) /*!< 0x00000010 */ +#define ADC_DR_RDATA_5 (0x0020UL << ADC_DR_RDATA_Pos) /*!< 0x00000020 */ +#define ADC_DR_RDATA_6 (0x0040UL << ADC_DR_RDATA_Pos) /*!< 0x00000040 */ +#define ADC_DR_RDATA_7 (0x0080UL << ADC_DR_RDATA_Pos) /*!< 0x00000080 */ +#define ADC_DR_RDATA_8 (0x0100UL << ADC_DR_RDATA_Pos) /*!< 0x00000100 */ +#define ADC_DR_RDATA_9 (0x0200UL << ADC_DR_RDATA_Pos) /*!< 0x00000200 */ +#define ADC_DR_RDATA_10 (0x0400UL << ADC_DR_RDATA_Pos) /*!< 0x00000400 */ +#define ADC_DR_RDATA_11 (0x0800UL << ADC_DR_RDATA_Pos) /*!< 0x00000800 */ +#define ADC_DR_RDATA_12 (0x1000UL << ADC_DR_RDATA_Pos) /*!< 0x00001000 */ +#define ADC_DR_RDATA_13 (0x2000UL << ADC_DR_RDATA_Pos) /*!< 0x00002000 */ +#define ADC_DR_RDATA_14 (0x4000UL << ADC_DR_RDATA_Pos) /*!< 0x00004000 */ +#define ADC_DR_RDATA_15 (0x8000UL << ADC_DR_RDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JSQR register ******************/ +#define ADC_JSQR_JL_Pos (0U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00000003 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00000002 */ + +#define ADC_JSQR_JEXTSEL_Pos (2U) +#define ADC_JSQR_JEXTSEL_Msk (0xFUL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000003C */ +#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC group injected external trigger source */ +#define ADC_JSQR_JEXTSEL_0 (0x1UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JEXTSEL_1 (0x2UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JEXTSEL_2 (0x4UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */ +#define ADC_JSQR_JEXTSEL_3 (0x8UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */ + +#define ADC_JSQR_JEXTEN_Pos (6U) +#define ADC_JSQR_JEXTEN_Msk (0x3UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x000000C0 */ +#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC group injected external trigger polarity */ +#define ADC_JSQR_JEXTEN_0 (0x1UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000040 */ +#define ADC_JSQR_JEXTEN_1 (0x2UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */ + +#define ADC_JSQR_JSQ1_Pos (8U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001F00 */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000100 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */ + +#define ADC_JSQR_JSQ2_Pos (14U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x0007C000 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00004000 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */ + +#define ADC_JSQR_JSQ3_Pos (20U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x01F00000 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00100000 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */ + +#define ADC_JSQR_JSQ4_Pos (26U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0x7C000000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x04000000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */ + +/******************** Bit definition for ADC_OFR1 register ******************/ +#define ADC_OFR1_OFFSET1_Pos (0U) +#define ADC_OFR1_OFFSET1_Msk (0xFFFUL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000FFF */ +#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC offset number 1 offset level */ +#define ADC_OFR1_OFFSET1_0 (0x001UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000001 */ +#define ADC_OFR1_OFFSET1_1 (0x002UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000002 */ +#define ADC_OFR1_OFFSET1_2 (0x004UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000004 */ +#define ADC_OFR1_OFFSET1_3 (0x008UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000008 */ +#define ADC_OFR1_OFFSET1_4 (0x010UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000010 */ +#define ADC_OFR1_OFFSET1_5 (0x020UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000020 */ +#define ADC_OFR1_OFFSET1_6 (0x040UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000040 */ +#define ADC_OFR1_OFFSET1_7 (0x080UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000080 */ +#define ADC_OFR1_OFFSET1_8 (0x100UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000100 */ +#define ADC_OFR1_OFFSET1_9 (0x200UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000200 */ +#define ADC_OFR1_OFFSET1_10 (0x400UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000400 */ +#define ADC_OFR1_OFFSET1_11 (0x800UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000800 */ + +#define ADC_OFR1_OFFSET1_CH_Pos (26U) +#define ADC_OFR1_OFFSET1_CH_Msk (0x1FUL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC offset number 1 channel selection */ +#define ADC_OFR1_OFFSET1_CH_0 (0x01UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR1_OFFSET1_CH_1 (0x02UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR1_OFFSET1_CH_2 (0x04UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR1_OFFSET1_CH_3 (0x08UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR1_OFFSET1_CH_4 (0x10UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR1_OFFSET1_EN_Pos (31U) +#define ADC_OFR1_OFFSET1_EN_Msk (0x1UL << ADC_OFR1_OFFSET1_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR1_OFFSET1_EN ADC_OFR1_OFFSET1_EN_Msk /*!< ADC offset number 1 enable */ + +/******************** Bit definition for ADC_OFR2 register ******************/ +#define ADC_OFR2_OFFSET2_Pos (0U) +#define ADC_OFR2_OFFSET2_Msk (0xFFFUL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000FFF */ +#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC offset number 2 offset level */ +#define ADC_OFR2_OFFSET2_0 (0x001UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000001 */ +#define ADC_OFR2_OFFSET2_1 (0x002UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000002 */ +#define ADC_OFR2_OFFSET2_2 (0x004UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000004 */ +#define ADC_OFR2_OFFSET2_3 (0x008UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000008 */ +#define ADC_OFR2_OFFSET2_4 (0x010UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000010 */ +#define ADC_OFR2_OFFSET2_5 (0x020UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000020 */ +#define ADC_OFR2_OFFSET2_6 (0x040UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000040 */ +#define ADC_OFR2_OFFSET2_7 (0x080UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000080 */ +#define ADC_OFR2_OFFSET2_8 (0x100UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000100 */ +#define ADC_OFR2_OFFSET2_9 (0x200UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000200 */ +#define ADC_OFR2_OFFSET2_10 (0x400UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000400 */ +#define ADC_OFR2_OFFSET2_11 (0x800UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000800 */ + +#define ADC_OFR2_OFFSET2_CH_Pos (26U) +#define ADC_OFR2_OFFSET2_CH_Msk (0x1FUL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC offset number 2 channel selection */ +#define ADC_OFR2_OFFSET2_CH_0 (0x01UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR2_OFFSET2_CH_1 (0x02UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR2_OFFSET2_CH_2 (0x04UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR2_OFFSET2_CH_3 (0x08UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR2_OFFSET2_CH_4 (0x10UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR2_OFFSET2_EN_Pos (31U) +#define ADC_OFR2_OFFSET2_EN_Msk (0x1UL << ADC_OFR2_OFFSET2_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR2_OFFSET2_EN ADC_OFR2_OFFSET2_EN_Msk /*!< ADC offset number 2 enable */ + +/******************** Bit definition for ADC_OFR3 register ******************/ +#define ADC_OFR3_OFFSET3_Pos (0U) +#define ADC_OFR3_OFFSET3_Msk (0xFFFUL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000FFF */ +#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC offset number 3 offset level */ +#define ADC_OFR3_OFFSET3_0 (0x001UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000001 */ +#define ADC_OFR3_OFFSET3_1 (0x002UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000002 */ +#define ADC_OFR3_OFFSET3_2 (0x004UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000004 */ +#define ADC_OFR3_OFFSET3_3 (0x008UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000008 */ +#define ADC_OFR3_OFFSET3_4 (0x010UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000010 */ +#define ADC_OFR3_OFFSET3_5 (0x020UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000020 */ +#define ADC_OFR3_OFFSET3_6 (0x040UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000040 */ +#define ADC_OFR3_OFFSET3_7 (0x080UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000080 */ +#define ADC_OFR3_OFFSET3_8 (0x100UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000100 */ +#define ADC_OFR3_OFFSET3_9 (0x200UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000200 */ +#define ADC_OFR3_OFFSET3_10 (0x400UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000400 */ +#define ADC_OFR3_OFFSET3_11 (0x800UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000800 */ + +#define ADC_OFR3_OFFSET3_CH_Pos (26U) +#define ADC_OFR3_OFFSET3_CH_Msk (0x1FUL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC offset number 3 channel selection */ +#define ADC_OFR3_OFFSET3_CH_0 (0x01UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR3_OFFSET3_CH_1 (0x02UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR3_OFFSET3_CH_2 (0x04UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR3_OFFSET3_CH_3 (0x08UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR3_OFFSET3_CH_4 (0x10UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR3_OFFSET3_EN_Pos (31U) +#define ADC_OFR3_OFFSET3_EN_Msk (0x1UL << ADC_OFR3_OFFSET3_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR3_OFFSET3_EN ADC_OFR3_OFFSET3_EN_Msk /*!< ADC offset number 3 enable */ + +/******************** Bit definition for ADC_OFR4 register ******************/ +#define ADC_OFR4_OFFSET4_Pos (0U) +#define ADC_OFR4_OFFSET4_Msk (0xFFFUL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000FFF */ +#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC offset number 4 offset level */ +#define ADC_OFR4_OFFSET4_0 (0x001UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000001 */ +#define ADC_OFR4_OFFSET4_1 (0x002UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000002 */ +#define ADC_OFR4_OFFSET4_2 (0x004UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000004 */ +#define ADC_OFR4_OFFSET4_3 (0x008UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000008 */ +#define ADC_OFR4_OFFSET4_4 (0x010UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000010 */ +#define ADC_OFR4_OFFSET4_5 (0x020UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000020 */ +#define ADC_OFR4_OFFSET4_6 (0x040UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000040 */ +#define ADC_OFR4_OFFSET4_7 (0x080UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000080 */ +#define ADC_OFR4_OFFSET4_8 (0x100UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000100 */ +#define ADC_OFR4_OFFSET4_9 (0x200UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000200 */ +#define ADC_OFR4_OFFSET4_10 (0x400UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000400 */ +#define ADC_OFR4_OFFSET4_11 (0x800UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000800 */ + +#define ADC_OFR4_OFFSET4_CH_Pos (26U) +#define ADC_OFR4_OFFSET4_CH_Msk (0x1FUL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC offset number 4 channel selection */ +#define ADC_OFR4_OFFSET4_CH_0 (0x01UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR4_OFFSET4_CH_1 (0x02UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR4_OFFSET4_CH_2 (0x04UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR4_OFFSET4_CH_3 (0x08UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR4_OFFSET4_CH_4 (0x10UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR4_OFFSET4_EN_Pos (31U) +#define ADC_OFR4_OFFSET4_EN_Msk (0x1UL << ADC_OFR4_OFFSET4_EN_Pos) /*!< 0x80000000 */ +#define ADC_OFR4_OFFSET4_EN ADC_OFR4_OFFSET4_EN_Msk /*!< ADC offset number 4 enable */ + +/******************** Bit definition for ADC_JDR1 register ******************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ +#define ADC_JDR1_JDATA_0 (0x0001UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR1_JDATA_1 (0x0002UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR1_JDATA_2 (0x0004UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR1_JDATA_3 (0x0008UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR1_JDATA_4 (0x0010UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR1_JDATA_5 (0x0020UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR1_JDATA_6 (0x0040UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR1_JDATA_7 (0x0080UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR1_JDATA_8 (0x0100UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR1_JDATA_9 (0x0200UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR1_JDATA_10 (0x0400UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR1_JDATA_11 (0x0800UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR1_JDATA_12 (0x1000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR1_JDATA_13 (0x2000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR1_JDATA_14 (0x4000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR1_JDATA_15 (0x8000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR2 register ******************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ +#define ADC_JDR2_JDATA_0 (0x0001UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR2_JDATA_1 (0x0002UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR2_JDATA_2 (0x0004UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR2_JDATA_3 (0x0008UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR2_JDATA_4 (0x0010UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR2_JDATA_5 (0x0020UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR2_JDATA_6 (0x0040UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR2_JDATA_7 (0x0080UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR2_JDATA_8 (0x0100UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR2_JDATA_9 (0x0200UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR2_JDATA_10 (0x0400UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR2_JDATA_11 (0x0800UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR2_JDATA_12 (0x1000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR2_JDATA_13 (0x2000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR2_JDATA_14 (0x4000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR2_JDATA_15 (0x8000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR3 register ******************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ +#define ADC_JDR3_JDATA_0 (0x0001UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR3_JDATA_1 (0x0002UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR3_JDATA_2 (0x0004UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR3_JDATA_3 (0x0008UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR3_JDATA_4 (0x0010UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR3_JDATA_5 (0x0020UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR3_JDATA_6 (0x0040UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR3_JDATA_7 (0x0080UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR3_JDATA_8 (0x0100UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR3_JDATA_9 (0x0200UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR3_JDATA_10 (0x0400UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR3_JDATA_11 (0x0800UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR3_JDATA_12 (0x1000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR3_JDATA_13 (0x2000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR3_JDATA_14 (0x4000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR3_JDATA_15 (0x8000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_JDR4 register ******************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ +#define ADC_JDR4_JDATA_0 (0x0001UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR4_JDATA_1 (0x0002UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR4_JDATA_2 (0x0004UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR4_JDATA_3 (0x0008UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR4_JDATA_4 (0x0010UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR4_JDATA_5 (0x0020UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR4_JDATA_6 (0x0040UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR4_JDATA_7 (0x0080UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR4_JDATA_8 (0x0100UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR4_JDATA_9 (0x0200UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR4_JDATA_10 (0x0400UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR4_JDATA_11 (0x0800UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR4_JDATA_12 (0x1000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR4_JDATA_13 (0x2000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR4_JDATA_14 (0x4000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR4_JDATA_15 (0x8000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00008000 */ + +/******************** Bit definition for ADC_AWD2CR register ****************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0x7FFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC analog watchdog 2 monitored channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_AWD3CR register ****************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0x7FFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x0007FFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC analog watchdog 3 monitored channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_DIFSEL register ****************/ +#define ADC_DIFSEL_DIFSEL_Pos (0U) +#define ADC_DIFSEL_DIFSEL_Msk (0x7FFFFUL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x0007FFFF */ +#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC channel differential or single-ended mode */ +#define ADC_DIFSEL_DIFSEL_0 (0x00001UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */ +#define ADC_DIFSEL_DIFSEL_1 (0x00002UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */ +#define ADC_DIFSEL_DIFSEL_2 (0x00004UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */ +#define ADC_DIFSEL_DIFSEL_3 (0x00008UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */ +#define ADC_DIFSEL_DIFSEL_4 (0x00010UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */ +#define ADC_DIFSEL_DIFSEL_5 (0x00020UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */ +#define ADC_DIFSEL_DIFSEL_6 (0x00040UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */ +#define ADC_DIFSEL_DIFSEL_7 (0x00080UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */ +#define ADC_DIFSEL_DIFSEL_8 (0x00100UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */ +#define ADC_DIFSEL_DIFSEL_9 (0x00200UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */ +#define ADC_DIFSEL_DIFSEL_10 (0x00400UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */ +#define ADC_DIFSEL_DIFSEL_11 (0x00800UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */ +#define ADC_DIFSEL_DIFSEL_12 (0x01000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */ +#define ADC_DIFSEL_DIFSEL_13 (0x02000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */ +#define ADC_DIFSEL_DIFSEL_14 (0x04000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */ +#define ADC_DIFSEL_DIFSEL_15 (0x08000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */ +#define ADC_DIFSEL_DIFSEL_16 (0x10000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */ +#define ADC_DIFSEL_DIFSEL_17 (0x20000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */ +#define ADC_DIFSEL_DIFSEL_18 (0x40000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */ + +/******************** Bit definition for ADC_CALFACT register ***************/ +#define ADC_CALFACT_CALFACT_S_Pos (0U) +#define ADC_CALFACT_CALFACT_S_Msk (0x7FUL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x0000007F */ +#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factor in single-ended mode */ +#define ADC_CALFACT_CALFACT_S_0 (0x01UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_S_1 (0x02UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_S_2 (0x04UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_S_3 (0x08UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_S_4 (0x10UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_S_5 (0x20UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_S_6 (0x40UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000040 */ + +#define ADC_CALFACT_CALFACT_D_Pos (16U) +#define ADC_CALFACT_CALFACT_D_Msk (0x7FUL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x007F0000 */ +#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factor in differential mode */ +#define ADC_CALFACT_CALFACT_D_0 (0x01UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT_CALFACT_D_1 (0x02UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT_CALFACT_D_2 (0x04UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT_CALFACT_D_3 (0x08UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT_CALFACT_D_4 (0x10UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT_CALFACT_D_5 (0x20UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT_CALFACT_D_6 (0x40UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00400000 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CCR register *******************/ +#define ADC_CCR_CKMODE_Pos (16U) +#define ADC_CCR_CKMODE_Msk (0x3UL << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */ +#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC common clock source and prescaler (prescaler only for clock source synchronous) */ +#define ADC_CCR_CKMODE_0 (0x1UL << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */ +#define ADC_CCR_CKMODE_1 (0x2UL << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */ + +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC common clock prescaler, only for clock source asynchronous */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< ADC internal path to VrefInt enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< ADC internal path to temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< ADC internal path to battery voltage enable */ + +/******************************************************************************/ +/* */ +/* Controller Area Network */ +/* */ +/******************************************************************************/ +/*!*/ +#define DAC_CR_CEN1_Pos (14U) +#define DAC_CR_CEN1_Msk (0x1UL << DAC_CR_CEN1_Pos) /*!< 0x00004000 */ +#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*!>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ + return result; +} +#endif + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) +#else + #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) +#else + #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) +#else + #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXB(value, ptr) __strex(value, ptr) +#else + #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXH(value, ptr) __strex(value, ptr) +#else + #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXW(value, ptr) __strex(value, ptr) +#else + #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __clrex + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) +{ + rrx r0, r0 + bx lr +} +#endif + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRBT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRHT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRT(value, ptr) __strt(value, ptr) + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32U) ) >> 32U)) + +#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCC_H */ diff --git a/Drivers/CMSIS/Include/cmsis_armclang.h b/Drivers/CMSIS/Include/cmsis_armclang.h new file mode 100644 index 0000000..e917f35 --- /dev/null +++ b/Drivers/CMSIS/Include/cmsis_armclang.h @@ -0,0 +1,1444 @@ +/**************************************************************************//** + * @file cmsis_armclang.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V5.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +#define __SADD8 __builtin_arm_sadd8 +#define __QADD8 __builtin_arm_qadd8 +#define __SHADD8 __builtin_arm_shadd8 +#define __UADD8 __builtin_arm_uadd8 +#define __UQADD8 __builtin_arm_uqadd8 +#define __UHADD8 __builtin_arm_uhadd8 +#define __SSUB8 __builtin_arm_ssub8 +#define __QSUB8 __builtin_arm_qsub8 +#define __SHSUB8 __builtin_arm_shsub8 +#define __USUB8 __builtin_arm_usub8 +#define __UQSUB8 __builtin_arm_uqsub8 +#define __UHSUB8 __builtin_arm_uhsub8 +#define __SADD16 __builtin_arm_sadd16 +#define __QADD16 __builtin_arm_qadd16 +#define __SHADD16 __builtin_arm_shadd16 +#define __UADD16 __builtin_arm_uadd16 +#define __UQADD16 __builtin_arm_uqadd16 +#define __UHADD16 __builtin_arm_uhadd16 +#define __SSUB16 __builtin_arm_ssub16 +#define __QSUB16 __builtin_arm_qsub16 +#define __SHSUB16 __builtin_arm_shsub16 +#define __USUB16 __builtin_arm_usub16 +#define __UQSUB16 __builtin_arm_uqsub16 +#define __UHSUB16 __builtin_arm_uhsub16 +#define __SASX __builtin_arm_sasx +#define __QASX __builtin_arm_qasx +#define __SHASX __builtin_arm_shasx +#define __UASX __builtin_arm_uasx +#define __UQASX __builtin_arm_uqasx +#define __UHASX __builtin_arm_uhasx +#define __SSAX __builtin_arm_ssax +#define __QSAX __builtin_arm_qsax +#define __SHSAX __builtin_arm_shsax +#define __USAX __builtin_arm_usax +#define __UQSAX __builtin_arm_uqsax +#define __UHSAX __builtin_arm_uhsax +#define __USAD8 __builtin_arm_usad8 +#define __USADA8 __builtin_arm_usada8 +#define __SSAT16 __builtin_arm_ssat16 +#define __USAT16 __builtin_arm_usat16 +#define __UXTB16 __builtin_arm_uxtb16 +#define __UXTAB16 __builtin_arm_uxtab16 +#define __SXTB16 __builtin_arm_sxtb16 +#define __SXTAB16 __builtin_arm_sxtab16 +#define __SMUAD __builtin_arm_smuad +#define __SMUADX __builtin_arm_smuadx +#define __SMLAD __builtin_arm_smlad +#define __SMLADX __builtin_arm_smladx +#define __SMLALD __builtin_arm_smlald +#define __SMLALDX __builtin_arm_smlaldx +#define __SMUSD __builtin_arm_smusd +#define __SMUSDX __builtin_arm_smusdx +#define __SMLSD __builtin_arm_smlsd +#define __SMLSDX __builtin_arm_smlsdx +#define __SMLSLD __builtin_arm_smlsld +#define __SMLSLDX __builtin_arm_smlsldx +#define __SEL __builtin_arm_sel +#define __QADD __builtin_arm_qadd +#define __QSUB __builtin_arm_qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/Drivers/CMSIS/Include/cmsis_armclang_ltm.h b/Drivers/CMSIS/Include/cmsis_armclang_ltm.h new file mode 100644 index 0000000..feec324 --- /dev/null +++ b/Drivers/CMSIS/Include/cmsis_armclang_ltm.h @@ -0,0 +1,1891 @@ +/**************************************************************************//** + * @file cmsis_armclang_ltm.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V1.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2018-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/Drivers/CMSIS/Include/cmsis_compiler.h b/Drivers/CMSIS/Include/cmsis_compiler.h new file mode 100644 index 0000000..adbf296 --- /dev/null +++ b/Drivers/CMSIS/Include/cmsis_compiler.h @@ -0,0 +1,283 @@ +/**************************************************************************//** + * @file cmsis_compiler.h + * @brief CMSIS compiler generic header file + * @version V5.1.0 + * @date 09. October 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_COMPILER_H +#define __CMSIS_COMPILER_H + +#include + +/* + * Arm Compiler 4/5 + */ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + + +/* + * Arm Compiler 6.6 LTM (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) && (__ARMCC_VERSION < 6100100) + #include "cmsis_armclang_ltm.h" + + /* + * Arm Compiler above 6.10.1 (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6100100) + #include "cmsis_armclang.h" + + +/* + * GNU Compiler + */ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + + +/* + * IAR Compiler + */ +#elif defined ( __ICCARM__ ) + #include + + +/* + * TI Arm Compiler + */ +#elif defined ( __TI_ARM__ ) + #include + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __attribute__((packed)) + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed)) + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed)) + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) + #endif + #ifndef __RESTRICT + #define __RESTRICT __restrict + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * TASKING Compiler + */ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __packed__ + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __packed__ + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __packed__ + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __packed__ T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __align(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * COSMIC Compiler + */ +#elif defined ( __CSMC__ ) + #include + + #ifndef __ASM + #define __ASM _asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + // NO RETURN is automatically detected hence no warning here + #define __NO_RETURN + #endif + #ifndef __USED + #warning No compiler specific solution for __USED. __USED is ignored. + #define __USED + #endif + #ifndef __WEAK + #define __WEAK __weak + #endif + #ifndef __PACKED + #define __PACKED @packed + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT @packed struct + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION @packed union + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + @packed struct T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored. + #define __ALIGNED(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +#else + #error Unknown compiler. +#endif + + +#endif /* __CMSIS_COMPILER_H */ + diff --git a/Drivers/CMSIS/Include/cmsis_gcc.h b/Drivers/CMSIS/Include/cmsis_gcc.h new file mode 100644 index 0000000..3ddcc58 --- /dev/null +++ b/Drivers/CMSIS/Include/cmsis_gcc.h @@ -0,0 +1,2168 @@ +/**************************************************************************//** + * @file cmsis_gcc.h + * @brief CMSIS compiler GCC header file + * @version V5.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_GCC_H +#define __CMSIS_GCC_H + +/* ignore some GCC warnings */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" + +/* Fallback for __has_builtin */ +#ifndef __has_builtin + #define __has_builtin(x) (0) +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START + +/** + \brief Initializes data and bss sections + \details This default implementations initialized all data and additional bss + sections relying on .copy.table and .zero.table specified properly + in the used linker script. + + */ +__STATIC_FORCEINLINE __NO_RETURN void __cmsis_start(void) +{ + extern void _start(void) __NO_RETURN; + + typedef struct { + uint32_t const* src; + uint32_t* dest; + uint32_t wlen; + } __copy_table_t; + + typedef struct { + uint32_t* dest; + uint32_t wlen; + } __zero_table_t; + + extern const __copy_table_t __copy_table_start__; + extern const __copy_table_t __copy_table_end__; + extern const __zero_table_t __zero_table_start__; + extern const __zero_table_t __zero_table_end__; + + for (__copy_table_t const* pTable = &__copy_table_start__; pTable < &__copy_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = pTable->src[i]; + } + } + + for (__zero_table_t const* pTable = &__zero_table_start__; pTable < &__zero_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = 0u; + } + } + + _start(); +} + +#define __PROGRAM_START __cmsis_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP __StackTop +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT __StackLimit +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section(".vectors"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) :: "memory"); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) :: "memory"); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_FORCEINLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_get_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + return __builtin_arm_get_fpscr(); +#else + uint32_t result; + + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + return(result); +#endif +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_set_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + __builtin_arm_set_fpscr(fpscr); +#else + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory"); +#endif +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP() __ASM volatile ("nop") + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI() __ASM volatile ("wfi") + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE() __ASM volatile ("wfe") + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV() __ASM volatile ("sev") + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__STATIC_FORCEINLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__STATIC_FORCEINLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (int16_t)__builtin_bswap16(value); +#else + int16_t result; + + __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return result; +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM GCC 7.3 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__STATIC_FORCEINLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ + __extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#if 0 +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) +#endif + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#pragma GCC diagnostic pop + +#endif /* __CMSIS_GCC_H */ diff --git a/Drivers/CMSIS/Include/cmsis_iccarm.h b/Drivers/CMSIS/Include/cmsis_iccarm.h new file mode 100644 index 0000000..12d68fd --- /dev/null +++ b/Drivers/CMSIS/Include/cmsis_iccarm.h @@ -0,0 +1,964 @@ +/**************************************************************************//** + * @file cmsis_iccarm.h + * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file + * @version V5.1.0 + * @date 08. May 2019 + ******************************************************************************/ + +//------------------------------------------------------------------------------ +// +// Copyright (c) 2017-2019 IAR Systems +// Copyright (c) 2017-2019 Arm Limited. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License") +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// +//------------------------------------------------------------------------------ + + +#ifndef __CMSIS_ICCARM_H__ +#define __CMSIS_ICCARM_H__ + +#ifndef __ICCARM__ + #error This file should only be compiled by ICCARM +#endif + +#pragma system_include + +#define __IAR_FT _Pragma("inline=forced") __intrinsic + +#if (__VER__ >= 8000000) + #define __ICCARM_V8 1 +#else + #define __ICCARM_V8 0 +#endif + +#ifndef __ALIGNED + #if __ICCARM_V8 + #define __ALIGNED(x) __attribute__((aligned(x))) + #elif (__VER__ >= 7080000) + /* Needs IAR language extensions */ + #define __ALIGNED(x) __attribute__((aligned(x))) + #else + #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored. + #define __ALIGNED(x) + #endif +#endif + + +/* Define compiler macros for CPU architecture, used in CMSIS 5. + */ +#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__ +/* Macros already defined */ +#else + #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M' + #if __ARM_ARCH == 6 + #define __ARM_ARCH_6M__ 1 + #elif __ARM_ARCH == 7 + #if __ARM_FEATURE_DSP + #define __ARM_ARCH_7EM__ 1 + #else + #define __ARM_ARCH_7M__ 1 + #endif + #endif /* __ARM_ARCH */ + #endif /* __ARM_ARCH_PROFILE == 'M' */ +#endif + +/* Alternativ core deduction for older ICCARM's */ +#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \ + !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__) + #if defined(__ARM6M__) && (__CORE__ == __ARM6M__) + #define __ARM_ARCH_6M__ 1 + #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__) + #define __ARM_ARCH_7M__ 1 + #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__) + #define __ARM_ARCH_7EM__ 1 + #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #else + #error "Unknown target." + #endif +#endif + + + +#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1 + #define __IAR_M0_FAMILY 1 +#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1 + #define __IAR_M0_FAMILY 1 +#else + #define __IAR_M0_FAMILY 0 +#endif + + +#ifndef __ASM + #define __ASM __asm +#endif + +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +#ifndef __INLINE + #define __INLINE inline +#endif + +#ifndef __NO_RETURN + #if __ICCARM_V8 + #define __NO_RETURN __attribute__((__noreturn__)) + #else + #define __NO_RETURN _Pragma("object_attribute=__noreturn") + #endif +#endif + +#ifndef __PACKED + #if __ICCARM_V8 + #define __PACKED __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED __packed + #endif +#endif + +#ifndef __PACKED_STRUCT + #if __ICCARM_V8 + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_STRUCT __packed struct + #endif +#endif + +#ifndef __PACKED_UNION + #if __ICCARM_V8 + #define __PACKED_UNION union __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_UNION __packed union + #endif +#endif + +#ifndef __RESTRICT + #if __ICCARM_V8 + #define __RESTRICT __restrict + #else + /* Needs IAR language extensions */ + #define __RESTRICT restrict + #endif +#endif + +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif + +#ifndef __FORCEINLINE + #define __FORCEINLINE _Pragma("inline=forced") +#endif + +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE +#endif + +#ifndef __UNALIGNED_UINT16_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint16_t __iar_uint16_read(void const *ptr) +{ + return *(__packed uint16_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR) +#endif + + +#ifndef __UNALIGNED_UINT16_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val) +{ + *(__packed uint16_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint32_t __iar_uint32_read(void const *ptr) +{ + return *(__packed uint32_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR) +#endif + +#ifndef __UNALIGNED_UINT32_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val) +{ + *(__packed uint32_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32 /* deprecated */ +#pragma language=save +#pragma language=extended +__packed struct __iar_u32 { uint32_t v; }; +#pragma language=restore +#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v) +#endif + +#ifndef __USED + #if __ICCARM_V8 + #define __USED __attribute__((used)) + #else + #define __USED _Pragma("__root") + #endif +#endif + +#ifndef __WEAK + #if __ICCARM_V8 + #define __WEAK __attribute__((weak)) + #else + #define __WEAK _Pragma("__weak") + #endif +#endif + +#ifndef __PROGRAM_START +#define __PROGRAM_START __iar_program_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP CSTACK$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT CSTACK$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __vector_table +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE @".intvec" +#endif + +#ifndef __ICCARM_INTRINSICS_VERSION__ + #define __ICCARM_INTRINSICS_VERSION__ 0 +#endif + +#if __ICCARM_INTRINSICS_VERSION__ == 2 + + #if defined(__CLZ) + #undef __CLZ + #endif + #if defined(__REVSH) + #undef __REVSH + #endif + #if defined(__RBIT) + #undef __RBIT + #endif + #if defined(__SSAT) + #undef __SSAT + #endif + #if defined(__USAT) + #undef __USAT + #endif + + #include "iccarm_builtin.h" + + #define __disable_fault_irq __iar_builtin_disable_fiq + #define __disable_irq __iar_builtin_disable_interrupt + #define __enable_fault_irq __iar_builtin_enable_fiq + #define __enable_irq __iar_builtin_enable_interrupt + #define __arm_rsr __iar_builtin_rsr + #define __arm_wsr __iar_builtin_wsr + + + #define __get_APSR() (__arm_rsr("APSR")) + #define __get_BASEPRI() (__arm_rsr("BASEPRI")) + #define __get_CONTROL() (__arm_rsr("CONTROL")) + #define __get_FAULTMASK() (__arm_rsr("FAULTMASK")) + + #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + #define __get_FPSCR() (__arm_rsr("FPSCR")) + #define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE))) + #else + #define __get_FPSCR() ( 0 ) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #define __get_IPSR() (__arm_rsr("IPSR")) + #define __get_MSP() (__arm_rsr("MSP")) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __get_MSPLIM() (0U) + #else + #define __get_MSPLIM() (__arm_rsr("MSPLIM")) + #endif + #define __get_PRIMASK() (__arm_rsr("PRIMASK")) + #define __get_PSP() (__arm_rsr("PSP")) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __get_PSPLIM() (0U) + #else + #define __get_PSPLIM() (__arm_rsr("PSPLIM")) + #endif + + #define __get_xPSR() (__arm_rsr("xPSR")) + + #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) + #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) + #define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE))) + #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) + #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __set_MSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE))) + #endif + #define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE))) + #define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE))) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __set_PSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE))) + #endif + + #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) + #define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE))) + #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) + #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) + #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) + #define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE))) + #define __TZ_get_SP_NS() (__arm_rsr("SP_NS")) + #define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE))) + #define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS")) + #define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE))) + #define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS")) + #define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE))) + #define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS")) + #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __TZ_get_PSPLIM_NS() (0U) + #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE)) + #else + #define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS")) + #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE))) + #endif + + #define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS")) + #define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE))) + + #define __NOP __iar_builtin_no_operation + + #define __CLZ __iar_builtin_CLZ + #define __CLREX __iar_builtin_CLREX + + #define __DMB __iar_builtin_DMB + #define __DSB __iar_builtin_DSB + #define __ISB __iar_builtin_ISB + + #define __LDREXB __iar_builtin_LDREXB + #define __LDREXH __iar_builtin_LDREXH + #define __LDREXW __iar_builtin_LDREX + + #define __RBIT __iar_builtin_RBIT + #define __REV __iar_builtin_REV + #define __REV16 __iar_builtin_REV16 + + __IAR_FT int16_t __REVSH(int16_t val) + { + return (int16_t) __iar_builtin_REVSH(val); + } + + #define __ROR __iar_builtin_ROR + #define __RRX __iar_builtin_RRX + + #define __SEV __iar_builtin_SEV + + #if !__IAR_M0_FAMILY + #define __SSAT __iar_builtin_SSAT + #endif + + #define __STREXB __iar_builtin_STREXB + #define __STREXH __iar_builtin_STREXH + #define __STREXW __iar_builtin_STREX + + #if !__IAR_M0_FAMILY + #define __USAT __iar_builtin_USAT + #endif + + #define __WFE __iar_builtin_WFE + #define __WFI __iar_builtin_WFI + + #if __ARM_MEDIA__ + #define __SADD8 __iar_builtin_SADD8 + #define __QADD8 __iar_builtin_QADD8 + #define __SHADD8 __iar_builtin_SHADD8 + #define __UADD8 __iar_builtin_UADD8 + #define __UQADD8 __iar_builtin_UQADD8 + #define __UHADD8 __iar_builtin_UHADD8 + #define __SSUB8 __iar_builtin_SSUB8 + #define __QSUB8 __iar_builtin_QSUB8 + #define __SHSUB8 __iar_builtin_SHSUB8 + #define __USUB8 __iar_builtin_USUB8 + #define __UQSUB8 __iar_builtin_UQSUB8 + #define __UHSUB8 __iar_builtin_UHSUB8 + #define __SADD16 __iar_builtin_SADD16 + #define __QADD16 __iar_builtin_QADD16 + #define __SHADD16 __iar_builtin_SHADD16 + #define __UADD16 __iar_builtin_UADD16 + #define __UQADD16 __iar_builtin_UQADD16 + #define __UHADD16 __iar_builtin_UHADD16 + #define __SSUB16 __iar_builtin_SSUB16 + #define __QSUB16 __iar_builtin_QSUB16 + #define __SHSUB16 __iar_builtin_SHSUB16 + #define __USUB16 __iar_builtin_USUB16 + #define __UQSUB16 __iar_builtin_UQSUB16 + #define __UHSUB16 __iar_builtin_UHSUB16 + #define __SASX __iar_builtin_SASX + #define __QASX __iar_builtin_QASX + #define __SHASX __iar_builtin_SHASX + #define __UASX __iar_builtin_UASX + #define __UQASX __iar_builtin_UQASX + #define __UHASX __iar_builtin_UHASX + #define __SSAX __iar_builtin_SSAX + #define __QSAX __iar_builtin_QSAX + #define __SHSAX __iar_builtin_SHSAX + #define __USAX __iar_builtin_USAX + #define __UQSAX __iar_builtin_UQSAX + #define __UHSAX __iar_builtin_UHSAX + #define __USAD8 __iar_builtin_USAD8 + #define __USADA8 __iar_builtin_USADA8 + #define __SSAT16 __iar_builtin_SSAT16 + #define __USAT16 __iar_builtin_USAT16 + #define __UXTB16 __iar_builtin_UXTB16 + #define __UXTAB16 __iar_builtin_UXTAB16 + #define __SXTB16 __iar_builtin_SXTB16 + #define __SXTAB16 __iar_builtin_SXTAB16 + #define __SMUAD __iar_builtin_SMUAD + #define __SMUADX __iar_builtin_SMUADX + #define __SMMLA __iar_builtin_SMMLA + #define __SMLAD __iar_builtin_SMLAD + #define __SMLADX __iar_builtin_SMLADX + #define __SMLALD __iar_builtin_SMLALD + #define __SMLALDX __iar_builtin_SMLALDX + #define __SMUSD __iar_builtin_SMUSD + #define __SMUSDX __iar_builtin_SMUSDX + #define __SMLSD __iar_builtin_SMLSD + #define __SMLSDX __iar_builtin_SMLSDX + #define __SMLSLD __iar_builtin_SMLSLD + #define __SMLSLDX __iar_builtin_SMLSLDX + #define __SEL __iar_builtin_SEL + #define __QADD __iar_builtin_QADD + #define __QSUB __iar_builtin_QSUB + #define __PKHBT __iar_builtin_PKHBT + #define __PKHTB __iar_builtin_PKHTB + #endif + +#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #define __CLZ __cmsis_iar_clz_not_active + #define __SSAT __cmsis_iar_ssat_not_active + #define __USAT __cmsis_iar_usat_not_active + #define __RBIT __cmsis_iar_rbit_not_active + #define __get_APSR __cmsis_iar_get_APSR_not_active + #endif + + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #define __get_FPSCR __cmsis_iar_get_FPSR_not_active + #define __set_FPSCR __cmsis_iar_set_FPSR_not_active + #endif + + #ifdef __INTRINSICS_INCLUDED + #error intrinsics.h is already included previously! + #endif + + #include + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #undef __CLZ + #undef __SSAT + #undef __USAT + #undef __RBIT + #undef __get_APSR + + __STATIC_INLINE uint8_t __CLZ(uint32_t data) + { + if (data == 0U) { return 32U; } + + uint32_t count = 0U; + uint32_t mask = 0x80000000U; + + while ((data & mask) == 0U) + { + count += 1U; + mask = mask >> 1U; + } + return count; + } + + __STATIC_INLINE uint32_t __RBIT(uint32_t v) + { + uint8_t sc = 31U; + uint32_t r = v; + for (v >>= 1U; v; v >>= 1U) + { + r <<= 1U; + r |= v & 1U; + sc--; + } + return (r << sc); + } + + __STATIC_INLINE uint32_t __get_APSR(void) + { + uint32_t res; + __asm("MRS %0,APSR" : "=r" (res)); + return res; + } + + #endif + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #undef __get_FPSCR + #undef __set_FPSCR + #define __get_FPSCR() (0) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #pragma diag_suppress=Pe940 + #pragma diag_suppress=Pe177 + + #define __enable_irq __enable_interrupt + #define __disable_irq __disable_interrupt + #define __NOP __no_operation + + #define __get_xPSR __get_PSR + + #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0) + + __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr) + { + return __LDREX((unsigned long *)ptr); + } + + __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr) + { + return __STREX(value, (unsigned long *)ptr); + } + #endif + + + /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + #if (__CORTEX_M >= 0x03) + + __IAR_FT uint32_t __RRX(uint32_t value) + { + uint32_t result; + __ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc"); + return(result); + } + + __IAR_FT void __set_BASEPRI_MAX(uint32_t value) + { + __asm volatile("MSR BASEPRI_MAX,%0"::"r" (value)); + } + + + #define __enable_fault_irq __enable_fiq + #define __disable_fault_irq __disable_fiq + + + #endif /* (__CORTEX_M >= 0x03) */ + + __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2) + { + return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2)); + } + + #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + __IAR_FT uint32_t __get_MSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,MSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_MSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR MSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __get_PSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_PSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_CONTROL_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,CONTROL_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) + { + __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PSP_NS(uint32_t value) + { + __asm volatile("MSR PSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_MSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSP_NS(uint32_t value) + { + __asm volatile("MSR MSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_SP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,SP_NS" : "=r" (res)); + return res; + } + __IAR_FT void __TZ_set_SP_NS(uint32_t value) + { + __asm volatile("MSR SP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PRIMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PRIMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value) + { + __asm volatile("MSR PRIMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_BASEPRI_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,BASEPRI_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value) + { + __asm volatile("MSR BASEPRI_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value) + { + __asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSPLIM_NS(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM_NS" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM_NS,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_MSPLIM_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSPLIM_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value) + { + __asm volatile("MSR MSPLIM_NS,%0" :: "r" (value)); + } + + #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + +#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value)) + +#if __IAR_M0_FAMILY + __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) + { + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; + } + + __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) + { + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; + } +#endif + +#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + + __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) + { + uint32_t res; + __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) + { + uint32_t res; + __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) + { + uint32_t res; + __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return res; + } + + __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) + { + __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) + { + __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) + { + __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); + } + +#endif /* (__CORTEX_M >= 0x03) */ + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + + __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDA(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr) + { + __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr) + { + __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr) + { + __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + +#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#undef __IAR_FT +#undef __IAR_M0_FAMILY +#undef __ICCARM_V8 + +#pragma diag_default=Pe940 +#pragma diag_default=Pe177 + +#endif /* __CMSIS_ICCARM_H__ */ diff --git a/Drivers/CMSIS/Include/cmsis_version.h b/Drivers/CMSIS/Include/cmsis_version.h new file mode 100644 index 0000000..f2e2746 --- /dev/null +++ b/Drivers/CMSIS/Include/cmsis_version.h @@ -0,0 +1,39 @@ +/**************************************************************************//** + * @file cmsis_version.h + * @brief CMSIS Core(M) Version definitions + * @version V5.0.3 + * @date 24. June 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CMSIS_VERSION_H +#define __CMSIS_VERSION_H + +/* CMSIS Version definitions */ +#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ +#define __CM_CMSIS_VERSION_SUB ( 3U) /*!< [15:0] CMSIS Core(M) sub version */ +#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ + __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ +#endif diff --git a/Drivers/CMSIS/Include/core_armv81mml.h b/Drivers/CMSIS/Include/core_armv81mml.h new file mode 100644 index 0000000..8441e57 --- /dev/null +++ b/Drivers/CMSIS/Include/core_armv81mml.h @@ -0,0 +1,2968 @@ +/**************************************************************************//** + * @file core_armv81mml.h + * @brief CMSIS Armv8.1-M Mainline Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 15. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2018-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV81MML_H_GENERIC +#define __CORE_ARMV81MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMV81MML + @{ + */ + +#include "cmsis_version.h" + +#define __ARM_ARCH_8M_MAIN__ 1 // patching for now +/* CMSIS ARMV81MML definitions */ +#define __ARMv81MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv81MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv81MML_CMSIS_VERSION ((__ARMv81MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv81MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV81MML_H_DEPENDANT +#define __CORE_ARMV81MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv81MML_REV + #define __ARMv81MML_REV 0x0000U + #warning "__ARMv81MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv81MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (0x1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_armv8mbl.h b/Drivers/CMSIS/Include/core_armv8mbl.h new file mode 100644 index 0000000..344dca5 --- /dev/null +++ b/Drivers/CMSIS/Include/core_armv8mbl.h @@ -0,0 +1,1921 @@ +/**************************************************************************//** + * @file core_armv8mbl.h + * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MBL_H_GENERIC +#define __CORE_ARMV8MBL_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MBL + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __ARMv8MBL_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MBL_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MBL_CMSIS_VERSION ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MBL_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M ( 2U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MBL_H_DEPENDANT +#define __CORE_ARMV8MBL_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MBL_REV + #define __ARMv8MBL_REV 0x0000U + #warning "__ARMv8MBL_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MBL */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_armv8mml.h b/Drivers/CMSIS/Include/core_armv8mml.h new file mode 100644 index 0000000..5ddb8ae --- /dev/null +++ b/Drivers/CMSIS/Include/core_armv8mml.h @@ -0,0 +1,2835 @@ +/**************************************************************************//** + * @file core_armv8mml.h + * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 12. September 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MML_H_GENERIC +#define __CORE_ARMV8MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MML + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS Armv8MML definitions */ +#define __ARMv8MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MML_CMSIS_VERSION ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MML_H_DEPENDANT +#define __CORE_ARMV8MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MML_REV + #define __ARMv8MML_REV 0x0000U + #warning "__ARMv8MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm0.h b/Drivers/CMSIS/Include/core_cm0.h new file mode 100644 index 0000000..cafae5a --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm0.h @@ -0,0 +1,952 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0_H_GENERIC +#define __CORE_CM0_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M0 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0 definitions */ +#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ + __CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0_H_DEPENDANT +#define __CORE_CM0_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0_REV + #define __CM0_REV 0x0000U + #warning "__CM0_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M0 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = 0x0U; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M0 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = 0x0U; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm0plus.h b/Drivers/CMSIS/Include/core_cm0plus.h new file mode 100644 index 0000000..d104965 --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm0plus.h @@ -0,0 +1,1085 @@ +/**************************************************************************//** + * @file core_cm0plus.h + * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0PLUS_H_GENERIC +#define __CORE_CM0PLUS_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex-M0+ + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0+ definitions */ +#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ + __CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0PLUS_H_DEPENDANT +#define __CORE_CM0PLUS_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0PLUS_REV + #define __CM0PLUS_REV 0x0000U + #warning "__CM0PLUS_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex-M0+ */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0+ header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t vectors = SCB->VTOR; +#else + uint32_t vectors = 0x0U; +#endif + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M0+ does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t vectors = SCB->VTOR; +#else + uint32_t vectors = 0x0U; +#endif + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm1.h b/Drivers/CMSIS/Include/core_cm1.h new file mode 100644 index 0000000..76b4569 --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm1.h @@ -0,0 +1,979 @@ +/**************************************************************************//** + * @file core_cm1.h + * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File + * @version V1.0.1 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM1_H_GENERIC +#define __CORE_CM1_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M1 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM1 definitions */ +#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ + __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (1U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM1_H_DEPENDANT +#define __CORE_CM1_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM1_REV + #define __CM1_REV 0x0100U + #warning "__CM1_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M1 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ + +#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M1 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M1 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm23.h b/Drivers/CMSIS/Include/core_cm23.h new file mode 100644 index 0000000..b79c6af --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm23.h @@ -0,0 +1,1996 @@ +/**************************************************************************//** + * @file core_cm23.h + * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM23_H_GENERIC +#define __CORE_CM23_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M23 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __CM23_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM23_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM23_CMSIS_VERSION ((__CM23_CMSIS_VERSION_MAIN << 16U) | \ + __CM23_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (23U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM23_H_DEPENDANT +#define __CORE_CM23_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM23_REV + #define __CM23_REV 0x0000U + #warning "__CM23_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M23 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M23 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M23 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm3.h b/Drivers/CMSIS/Include/core_cm3.h new file mode 100644 index 0000000..8157ca7 --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm3.h @@ -0,0 +1,1937 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M3 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (3U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200U + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1U]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ +#endif + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm33.h b/Drivers/CMSIS/Include/core_cm33.h new file mode 100644 index 0000000..7fed59a --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm33.h @@ -0,0 +1,2910 @@ +/**************************************************************************//** + * @file core_cm33.h + * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM33_H_GENERIC +#define __CORE_CM33_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M33 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM33 definitions */ +#define __CM33_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM33_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM33_CMSIS_VERSION ((__CM33_CMSIS_VERSION_MAIN << 16U) | \ + __CM33_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (33U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM33_H_DEPENDANT +#define __CORE_CM33_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM33_REV + #define __CM33_REV 0x0000U + #warning "__CM33_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M33 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm35p.h b/Drivers/CMSIS/Include/core_cm35p.h new file mode 100644 index 0000000..5579c82 --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm35p.h @@ -0,0 +1,2910 @@ +/**************************************************************************//** + * @file core_cm35p.h + * @brief CMSIS Cortex-M35P Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM35P_H_GENERIC +#define __CORE_CM35P_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M35P + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM35P definitions */ +#define __CM35P_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM35P_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM35P_CMSIS_VERSION ((__CM35P_CMSIS_VERSION_MAIN << 16U) | \ + __CM35P_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (35U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM35P_H_DEPENDANT +#define __CORE_CM35P_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM35P_REV + #define __CM35P_REV 0x0000U + #warning "__CM35P_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M35P */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm4.h b/Drivers/CMSIS/Include/core_cm4.h new file mode 100644 index 0000000..12c023b --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm4.h @@ -0,0 +1,2124 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M4 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ + __CM4_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (4U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000U + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M4 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M4 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_cm7.h b/Drivers/CMSIS/Include/core_cm7.h new file mode 100644 index 0000000..c4515d8 --- /dev/null +++ b/Drivers/CMSIS/Include/core_cm7.h @@ -0,0 +1,2725 @@ +/**************************************************************************//** + * @file core_cm7.h + * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File + * @version V5.1.1 + * @date 28. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM7_H_GENERIC +#define __CORE_CM7_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M7 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM7 definitions */ +#define __CM7_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM7_CMSIS_VERSION_SUB ( __CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ + __CM7_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (7U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM7_H_DEPENDANT +#define __CORE_CM7_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM7_REV + #define __CM7_REV 0x0000U + #warning "__CM7_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DTCM_PRESENT + #define __DTCM_PRESENT 0U + #warning "__DTCM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M7 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1U]; + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED3[93U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ + +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISDYNADD_Pos 26U /*!< ACTLR: DISDYNADD Position */ +#define SCnSCB_ACTLR_DISDYNADD_Msk (1UL << SCnSCB_ACTLR_DISDYNADD_Pos) /*!< ACTLR: DISDYNADD Mask */ + +#define SCnSCB_ACTLR_DISISSCH1_Pos 21U /*!< ACTLR: DISISSCH1 Position */ +#define SCnSCB_ACTLR_DISISSCH1_Msk (0x1FUL << SCnSCB_ACTLR_DISISSCH1_Pos) /*!< ACTLR: DISISSCH1 Mask */ + +#define SCnSCB_ACTLR_DISDI_Pos 16U /*!< ACTLR: DISDI Position */ +#define SCnSCB_ACTLR_DISDI_Msk (0x1FUL << SCnSCB_ACTLR_DISDI_Pos) /*!< ACTLR: DISDI Mask */ + +#define SCnSCB_ACTLR_DISCRITAXIRUR_Pos 15U /*!< ACTLR: DISCRITAXIRUR Position */ +#define SCnSCB_ACTLR_DISCRITAXIRUR_Msk (1UL << SCnSCB_ACTLR_DISCRITAXIRUR_Pos) /*!< ACTLR: DISCRITAXIRUR Mask */ + +#define SCnSCB_ACTLR_DISBTACALLOC_Pos 14U /*!< ACTLR: DISBTACALLOC Position */ +#define SCnSCB_ACTLR_DISBTACALLOC_Msk (1UL << SCnSCB_ACTLR_DISBTACALLOC_Pos) /*!< ACTLR: DISBTACALLOC Mask */ + +#define SCnSCB_ACTLR_DISBTACREAD_Pos 13U /*!< ACTLR: DISBTACREAD Position */ +#define SCnSCB_ACTLR_DISBTACREAD_Msk (1UL << SCnSCB_ACTLR_DISBTACREAD_Pos) /*!< ACTLR: DISBTACREAD Mask */ + +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ +#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ + +#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED3[981U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = SCB->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## Cache functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_CacheFunctions Cache Functions + \brief Functions that configure Instruction and Data cache. + @{ + */ + +/* Cache Size ID Register Macros */ +#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + +#define __SCB_DCACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#define __SCB_ICACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if (SCB->CCR & SCB_CCR_IC_Msk) return; /* return if ICache is already enabled */ + + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief I-Cache Invalidate by address + \details Invalidates I-Cache for the given address. + I-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + I-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] isize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateICache_by_Addr (void *addr, int32_t isize) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if ( isize > 0 ) { + int32_t op_size = isize + (((uint32_t)addr) & (__SCB_ICACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_ICACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->ICIMVAU = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_ICACHE_LINE_SIZE; + op_size -= __SCB_ICACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + if (SCB->CCR & SCB_CCR_DC_Msk) return; /* return if DCache is already enabled */ + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address. + D-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateDCache_by_Addr (void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + D-Cache is cleaned starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + D-Cache is cleaned and invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned and invalidated. + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + +/*@} end of CMSIS_Core_CacheFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_sc000.h b/Drivers/CMSIS/Include/core_sc000.h new file mode 100644 index 0000000..cf92577 --- /dev/null +++ b/Drivers/CMSIS/Include/core_sc000.h @@ -0,0 +1,1025 @@ +/**************************************************************************//** + * @file core_sc000.h + * @brief CMSIS SC000 Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC000_H_GENERIC +#define __CORE_SC000_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC000 definitions */ +#define __SC000_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC000_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ + __SC000_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (000U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC000_H_DEPENDANT +#define __CORE_SC000_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC000_REV + #define __SC000_REV 0x0000U + #warning "__SC000_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC000 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + uint32_t RESERVED1[154U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the SC000 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for SC000 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for SC000 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for SC000 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M0 and M0+ do not require the architectural barrier - assume SC000 is the same */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/core_sc300.h b/Drivers/CMSIS/Include/core_sc300.h new file mode 100644 index 0000000..40f3af8 --- /dev/null +++ b/Drivers/CMSIS/Include/core_sc300.h @@ -0,0 +1,1912 @@ +/**************************************************************************//** + * @file core_sc300.h + * @brief CMSIS SC300 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 31. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC300_H_GENERIC +#define __CORE_SC300_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC3000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC300 definitions */ +#define __SC300_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC300_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ + __SC300_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (300U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC300_H_DEPENDANT +#define __CORE_SC300_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC300_REV + #define __SC300_REV 0x0000U + #warning "__SC300_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC300 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED1[129U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Drivers/CMSIS/Include/mpu_armv7.h b/Drivers/CMSIS/Include/mpu_armv7.h new file mode 100644 index 0000000..66ef59b --- /dev/null +++ b/Drivers/CMSIS/Include/mpu_armv7.h @@ -0,0 +1,272 @@ +/****************************************************************************** + * @file mpu_armv7.h + * @brief CMSIS MPU API for Armv7-M MPU + * @version V5.1.0 + * @date 08. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2017-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV7_H +#define ARM_MPU_ARMV7_H + +#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes +#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes +#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes +#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes +#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes +#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte +#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes +#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes +#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes +#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes +#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes +#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes +#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes +#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes +#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes +#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte +#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes +#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes +#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes +#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes +#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes +#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes +#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes +#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes +#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes +#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte +#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes +#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes + +#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access +#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only +#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only +#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access +#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only +#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access + +/** MPU Region Base Address Register Value +* +* \param Region The region to be configured, number 0 to 15. +* \param BaseAddress The base address for the region. +*/ +#define ARM_MPU_RBAR(Region, BaseAddress) \ + (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ + ((Region) & MPU_RBAR_REGION_Msk) | \ + (MPU_RBAR_VALID_Msk)) + +/** +* MPU Memory Access Attributes +* +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +*/ +#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ + ((((TypeExtField) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ + ((((DisableExec) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((AccessAttributes) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) | \ + (((SubRegionDisable) << MPU_RASR_SRD_Pos) & MPU_RASR_SRD_Msk) | \ + (((Size) << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk) | \ + (((MPU_RASR_ENABLE_Msk)))) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ + ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size) + +/** +* MPU Memory Access Attribute for strongly ordered memory. +* - TEX: 000b +* - Shareable +* - Non-cacheable +* - Non-bufferable +*/ +#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U) + +/** +* MPU Memory Access Attribute for device memory. +* - TEX: 000b (if shareable) or 010b (if non-shareable) +* - Shareable or non-shareable +* - Non-cacheable +* - Bufferable (if shareable) or non-bufferable (if non-shareable) +* +* \param IsShareable Configures the device memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U)) + +/** +* MPU Memory Access Attribute for normal memory. +* - TEX: 1BBb (reflecting outer cacheability rules) +* - Shareable or non-shareable +* - Cacheable or non-cacheable (reflecting inner cacheability rules) +* - Bufferable or non-bufferable (reflecting inner cacheability rules) +* +* \param OuterCp Configures the outer cache policy. +* \param InnerCp Configures the inner cache policy. +* \param IsShareable Configures the memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U)) + +/** +* MPU Memory Access Attribute non-cacheable policy. +*/ +#define ARM_MPU_CACHEP_NOCACHE 0U + +/** +* MPU Memory Access Attribute write-back, write and read allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_WRA 1U + +/** +* MPU Memory Access Attribute write-through, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WT_NWA 2U + +/** +* MPU Memory Access Attribute write-back, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_NWA 3U + + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; //!< The region base address register value (RBAR) + uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + MPU->RNR = rnr; + MPU->RASR = 0U; +} + +/** Configure an MPU region. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) +{ + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) +{ + MPU->RNR = rnr; + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + while (cnt > MPU_TYPE_RALIASES) { + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + table += MPU_TYPE_RALIASES; + cnt -= MPU_TYPE_RALIASES; + } + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); +} + +#endif diff --git a/Drivers/CMSIS/Include/mpu_armv8.h b/Drivers/CMSIS/Include/mpu_armv8.h new file mode 100644 index 0000000..0041d4d --- /dev/null +++ b/Drivers/CMSIS/Include/mpu_armv8.h @@ -0,0 +1,346 @@ +/****************************************************************************** + * @file mpu_armv8.h + * @brief CMSIS MPU API for Armv8-M and Armv8.1-M MPU + * @version V5.1.0 + * @date 08. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2017-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV8_H +#define ARM_MPU_ARMV8_H + +/** \brief Attribute for device memory (outer only) */ +#define ARM_MPU_ATTR_DEVICE ( 0U ) + +/** \brief Attribute for non-cacheable, normal memory */ +#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) + +/** \brief Attribute for normal memory (outer and inner) +* \param NT Non-Transient: Set to 1 for non-transient data. +* \param WB Write-Back: Set to 1 to use write-back update policy. +* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. +* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. +*/ +#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ + (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U)) + +/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) + +/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) + +/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGRE (2U) + +/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_GRE (3U) + +/** \brief Memory Attribute +* \param O Outer memory attributes +* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes +*/ +#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U))) + +/** \brief Normal memory non-shareable */ +#define ARM_MPU_SH_NON (0U) + +/** \brief Normal memory outer shareable */ +#define ARM_MPU_SH_OUTER (2U) + +/** \brief Normal memory inner shareable */ +#define ARM_MPU_SH_INNER (3U) + +/** \brief Memory access permissions +* \param RO Read-Only: Set to 1 for read-only memory. +* \param NP Non-Privileged: Set to 1 for non-privileged memory. +*/ +#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U)) + +/** \brief Region Base Address Register value +* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. +* \param SH Defines the Shareability domain for this memory region. +* \param RO Read-Only: Set to 1 for a read-only memory region. +* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. +* \oaram XN eXecute Never: Set to 1 for a non-executable memory region. +*/ +#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ + ((BASE & MPU_RBAR_BASE_Msk) | \ + ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ + ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ + ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) + +/** \brief Region Limit Address Register value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR(LIMIT, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#if defined(MPU_RLAR_PXN_Pos) + +/** \brief Region Limit Address Register with PXN value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR_PXN(LIMIT, PXN, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((PXN << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#endif + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; /*!< Region Base Address Register value */ + uint32_t RLAR; /*!< Region Limit Address Register value */ +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +#ifdef MPU_NS +/** Enable the Non-secure MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) +{ + MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the Non-secure MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable_NS(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} +#endif + +/** Set the memory attribute encoding to the given MPU. +* \param mpu Pointer to the MPU to be configured. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) +{ + const uint8_t reg = idx / 4U; + const uint32_t pos = ((idx % 4U) * 8U); + const uint32_t mask = 0xFFU << pos; + + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { + return; // invalid index + } + + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); +} + +/** Set the memory attribute encoding. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU, idx, attr); +} + +#ifdef MPU_NS +/** Set the memory attribute encoding to the Non-secure MPU. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); +} +#endif + +/** Clear and disable the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) +{ + mpu->RNR = rnr; + mpu->RLAR = 0U; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU, rnr); +} + +#ifdef MPU_NS +/** Clear and disable the given Non-secure MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU_NS, rnr); +} +#endif + +/** Configure the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + mpu->RNR = rnr; + mpu->RBAR = rbar; + mpu->RLAR = rlar; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); +} + +#ifdef MPU_NS +/** Configure the given Non-secure MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); +} +#endif + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table to the given MPU. +* \param mpu Pointer to the MPU registers to be used. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + if (cnt == 1U) { + mpu->RNR = rnr; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); + } else { + uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); + uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; + + mpu->RNR = rnrBase; + while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { + uint32_t c = MPU_TYPE_RALIASES - rnrOffset; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); + table += c; + cnt -= c; + rnrOffset = 0U; + rnrBase += MPU_TYPE_RALIASES; + mpu->RNR = rnrBase; + } + + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); + } +} + +/** Load the given number of MPU regions from a table. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU, rnr, table, cnt); +} + +#ifdef MPU_NS +/** Load the given number of MPU regions from a table to the Non-secure MPU. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); +} +#endif + +#endif + diff --git a/Drivers/CMSIS/Include/tz_context.h b/Drivers/CMSIS/Include/tz_context.h new file mode 100644 index 0000000..0d09749 --- /dev/null +++ b/Drivers/CMSIS/Include/tz_context.h @@ -0,0 +1,70 @@ +/****************************************************************************** + * @file tz_context.h + * @brief Context Management for Armv8-M TrustZone + * @version V1.0.1 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef TZ_CONTEXT_H +#define TZ_CONTEXT_H + +#include + +#ifndef TZ_MODULEID_T +#define TZ_MODULEID_T +/// \details Data type that identifies secure software modules called by a process. +typedef uint32_t TZ_ModuleId_t; +#endif + +/// \details TZ Memory ID identifies an allocated memory slot. +typedef uint32_t TZ_MemoryId_t; + +/// Initialize secure context memory system +/// \return execution status (1: success, 0: error) +uint32_t TZ_InitContextSystem_S (void); + +/// Allocate context memory for calling secure software modules in TrustZone +/// \param[in] module identifies software modules called from non-secure mode +/// \return value != 0 id TrustZone memory slot identifier +/// \return value 0 no memory available or internal error +TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module); + +/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id); + +/// Load secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_LoadContext_S (TZ_MemoryId_t id); + +/// Store secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_StoreContext_S (TZ_MemoryId_t id); + +#endif // TZ_CONTEXT_H diff --git a/Drivers/CMSIS/LICENSE.txt b/Drivers/CMSIS/LICENSE.txt new file mode 100644 index 0000000..8dada3e --- /dev/null +++ b/Drivers/CMSIS/LICENSE.txt @@ -0,0 +1,201 @@ + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + + To apply the Apache License to your work, attach the following + boilerplate notice, with the fields enclosed by brackets "{}" + replaced with your own identifying information. (Don't include + the brackets!) The text should be enclosed in the appropriate + comment syntax for the file format. We also recommend that a + file or class name and description of purpose be included on the + same "printed page" as the copyright notice for easier + identification within third-party archives. + + Copyright {yyyy} {name of copyright owner} + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h new file mode 100644 index 0000000..d202e71 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -0,0 +1,4374 @@ +/** + ****************************************************************************** + * @file stm32_hal_legacy.h + * @author MCD Application Team + * @brief This file contains aliases definition for the STM32Cube HAL constants + * macros and functions maintained for legacy purpose. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_HAL_LEGACY +#define STM32_HAL_LEGACY + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose + * @{ + */ +#define AES_FLAG_RDERR CRYP_FLAG_RDERR +#define AES_FLAG_WRERR CRYP_FLAG_WRERR +#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF +#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR +#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR +#if defined(STM32H7) || defined(STM32MP1) +#define CRYP_DATATYPE_32B CRYP_NO_SWAP +#define CRYP_DATATYPE_16B CRYP_HALFWORD_SWAP +#define CRYP_DATATYPE_8B CRYP_BYTE_SWAP +#define CRYP_DATATYPE_1B CRYP_BIT_SWAP +#endif /* STM32H7 || STM32MP1 */ +/** + * @} + */ + +/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose + * @{ + */ +#define ADC_RESOLUTION12b ADC_RESOLUTION_12B +#define ADC_RESOLUTION10b ADC_RESOLUTION_10B +#define ADC_RESOLUTION8b ADC_RESOLUTION_8B +#define ADC_RESOLUTION6b ADC_RESOLUTION_6B +#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN +#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED +#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV +#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV +#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV +#define REGULAR_GROUP ADC_REGULAR_GROUP +#define INJECTED_GROUP ADC_INJECTED_GROUP +#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP +#define AWD_EVENT ADC_AWD_EVENT +#define AWD1_EVENT ADC_AWD1_EVENT +#define AWD2_EVENT ADC_AWD2_EVENT +#define AWD3_EVENT ADC_AWD3_EVENT +#define OVR_EVENT ADC_OVR_EVENT +#define JQOVF_EVENT ADC_JQOVF_EVENT +#define ALL_CHANNELS ADC_ALL_CHANNELS +#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS +#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS +#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR +#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT +#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 +#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 +#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 +#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 +#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 +#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO +#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 +#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO +#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 +#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO +#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 +#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 +#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE +#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING +#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING +#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING +#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 + +#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY +#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY +#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC +#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC +#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL +#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL +#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 + +#if defined(STM32H7) +#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT +#endif /* STM32H7 */ + +#if defined(STM32U5) +#define ADC_SAMPLETIME_5CYCLE ADC_SAMPLETIME_5CYCLES +#define ADC_SAMPLETIME_391CYCLES_5 ADC_SAMPLETIME_391CYCLES +#define ADC4_SAMPLETIME_160CYCLES_5 ADC4_SAMPLETIME_814CYCLES_5 +#endif /* STM32U5 */ + +#if defined(STM32H5) +#define ADC_CHANNEL_VCORE ADC_CHANNEL_VDDCORE +#endif /* STM32H5 */ +/** + * @} + */ + +/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose + * @{ + */ +#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE +#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE +#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 +#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 +#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 +#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 +#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 +#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 +#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 +#if defined(STM32L0) +#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM + input 1 for COMP1, LPTIM input 2 for COMP2 */ +#endif +#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR +#if defined(STM32F373xC) || defined(STM32F378xx) +#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 +#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR +#endif /* STM32F373xC || STM32F378xx */ + +#if defined(STM32L0) || defined(STM32L4) +#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON + +#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 +#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 +#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 +#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 +#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 +#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 + +#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT +#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT +#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT +#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT +#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 +#if defined(STM32L0) +/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ +/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ +/* to the second dedicated IO (only for COMP2). */ +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 +#else +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 +#endif +#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 +#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 + +#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW +#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH + +/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ +/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ +#if defined(COMP_CSR_LOCK) +#define COMP_FLAG_LOCK COMP_CSR_LOCK +#elif defined(COMP_CSR_COMP1LOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK +#elif defined(COMP_CSR_COMPxLOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK +#endif + +#if defined(STM32L4) +#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 +#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 +#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 +#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 +#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE +#endif + +#if defined(STM32L0) +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER +#else +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED +#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER +#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER +#endif + +#endif + +#if defined(STM32U5) +#define __HAL_COMP_COMP1_EXTI_CLEAR_RASING_FLAG __HAL_COMP_COMP1_EXTI_CLEAR_RISING_FLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose + * @{ + */ +#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig +#if defined(STM32U5) +#define MPU_DEVICE_nGnRnE MPU_DEVICE_NGNRNE +#define MPU_DEVICE_nGnRE MPU_DEVICE_NGNRE +#define MPU_DEVICE_nGRE MPU_DEVICE_NGRE +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup CRC_Aliases CRC API aliases + * @{ + */ +#if defined(STM32H5) || defined(STM32C0) +#else +#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for + inter STM32 series compatibility */ +#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for + inter STM32 series compatibility */ +#endif +/** + * @} + */ + +/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE +#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define DAC1_CHANNEL_1 DAC_CHANNEL_1 +#define DAC1_CHANNEL_2 DAC_CHANNEL_2 +#define DAC2_CHANNEL_1 DAC_CHANNEL_1 +#define DAC_WAVE_NONE 0x00000000U +#define DAC_WAVE_NOISE DAC_CR_WAVE1_0 +#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1 +#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE +#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE +#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE + +#if defined(STM32G4) || defined(STM32H7) || defined (STM32U5) +#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL +#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL +#endif + +#if defined(STM32U5) +#define DAC_TRIGGER_STOP_LPTIM1_OUT DAC_TRIGGER_STOP_LPTIM1_CH1 +#define DAC_TRIGGER_STOP_LPTIM3_OUT DAC_TRIGGER_STOP_LPTIM3_CH1 +#define DAC_TRIGGER_LPTIM1_OUT DAC_TRIGGER_LPTIM1_CH1 +#define DAC_TRIGGER_LPTIM3_OUT DAC_TRIGGER_LPTIM3_CH1 +#endif + +#if defined(STM32H5) +#define DAC_TRIGGER_LPTIM1_OUT DAC_TRIGGER_LPTIM1_CH1 +#define DAC_TRIGGER_LPTIM2_OUT DAC_TRIGGER_LPTIM2_CH1 +#endif + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || \ + defined(STM32F4) || defined(STM32G4) +#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID +#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID +#endif + +/** + * @} + */ + +/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 +#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 +#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 +#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 +#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 +#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 +#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 +#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 +#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 +#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 +#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 +#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 +#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 +#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 + +#define IS_HAL_REMAPDMA IS_DMA_REMAP +#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE +#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE + +#if defined(STM32L4) + +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15 +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE +#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT +#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT +#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || \ + defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI +#endif + +#endif /* STM32L4 */ + +#if defined(STM32G0) +#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#define DMA_REQUEST_TIM16_TRIG_COM DMA_REQUEST_TIM16_COM +#define DMA_REQUEST_TIM17_TRIG_COM DMA_REQUEST_TIM17_COM + +#define LL_DMAMUX_REQ_TIM16_TRIG_COM LL_DMAMUX_REQ_TIM16_COM +#define LL_DMAMUX_REQ_TIM17_TRIG_COM LL_DMAMUX_REQ_TIM17_COM +#endif + +#if defined(STM32H7) + +#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2 + +#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX +#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX + +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO + +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0 +#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2 +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT + +#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT +#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT + +#endif /* STM32H7 */ + +#if defined(STM32U5) +#define GPDMA1_REQUEST_DCMI GPDMA1_REQUEST_DCMI_PSSI +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD +#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD +#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS +#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES +#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES +#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE +#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE +#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE +#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE +#define OBEX_PCROP OPTIONBYTE_PCROP +#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG +#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE +#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE +#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE +#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD +#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD +#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE +#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD +#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD +#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE +#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD +#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD +#define PAGESIZE FLASH_PAGE_SIZE +#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD +#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 +#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 +#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 +#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 +#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST +#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST +#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA +#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB +#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA +#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB +#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE +#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN +#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE +#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN +#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE +#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD +#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP +#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV +#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR +#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA +#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS +#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST +#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR +#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO +#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS +#define OB_WDG_SW OB_IWDG_SW +#define OB_WDG_HW OB_IWDG_HW +#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET +#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET +#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET +#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET +#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR +#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 +#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 +#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 +#if defined(STM32G0) || defined(STM32C0) +#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE +#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH +#else +#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE +#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE +#endif +#if defined(STM32H7) +#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 +#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 +#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 +#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 +#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 +#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#endif /* STM32H7 */ +#if defined(STM32U5) +#define OB_USER_nRST_STOP OB_USER_NRST_STOP +#define OB_USER_nRST_STDBY OB_USER_NRST_STDBY +#define OB_USER_nRST_SHDW OB_USER_NRST_SHDW +#define OB_USER_nSWBOOT0 OB_USER_NSWBOOT0 +#define OB_USER_nBOOT0 OB_USER_NBOOT0 +#define OB_nBOOT0_RESET OB_NBOOT0_RESET +#define OB_nBOOT0_SET OB_NBOOT0_SET +#define OB_USER_SRAM134_RST OB_USER_SRAM_RST +#define OB_SRAM134_RST_ERASE OB_SRAM_RST_ERASE +#define OB_SRAM134_RST_NOT_ERASE OB_SRAM_RST_NOT_ERASE +#endif /* STM32U5 */ +#if defined(STM32U0) +#define OB_USER_nRST_STOP OB_USER_NRST_STOP +#define OB_USER_nRST_STDBY OB_USER_NRST_STDBY +#define OB_USER_nRST_SHDW OB_USER_NRST_SHDW +#define OB_USER_nBOOT_SEL OB_USER_NBOOT_SEL +#define OB_USER_nBOOT0 OB_USER_NBOOT0 +#define OB_USER_nBOOT1 OB_USER_NBOOT1 +#define OB_nBOOT0_RESET OB_NBOOT0_RESET +#define OB_nBOOT0_SET OB_NBOOT0_SET +#endif /* STM32U0 */ + +/** + * @} + */ + +/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose + * @{ + */ + +#if defined(STM32H7) +#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE +#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE +#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET +#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET +#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE +#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose + * @{ + */ + +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 +#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 +#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 +#if defined(STM32G4) + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster +#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD +#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD +#endif /* STM32G4 */ + +#if defined(STM32H5) +#define SYSCFG_IT_FPU_IOC SBS_IT_FPU_IOC +#define SYSCFG_IT_FPU_DZC SBS_IT_FPU_DZC +#define SYSCFG_IT_FPU_UFC SBS_IT_FPU_UFC +#define SYSCFG_IT_FPU_OFC SBS_IT_FPU_OFC +#define SYSCFG_IT_FPU_IDC SBS_IT_FPU_IDC +#define SYSCFG_IT_FPU_IXC SBS_IT_FPU_IXC + +#define SYSCFG_BREAK_FLASH_ECC SBS_BREAK_FLASH_ECC +#define SYSCFG_BREAK_PVD SBS_BREAK_PVD +#define SYSCFG_BREAK_SRAM_ECC SBS_BREAK_SRAM_ECC +#define SYSCFG_BREAK_LOCKUP SBS_BREAK_LOCKUP + +#define SYSCFG_VREFBUF_VOLTAGE_SCALE0 VREFBUF_VOLTAGE_SCALE0 +#define SYSCFG_VREFBUF_VOLTAGE_SCALE1 VREFBUF_VOLTAGE_SCALE1 +#define SYSCFG_VREFBUF_VOLTAGE_SCALE2 VREFBUF_VOLTAGE_SCALE2 +#define SYSCFG_VREFBUF_VOLTAGE_SCALE3 VREFBUF_VOLTAGE_SCALE3 + +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE VREFBUF_HIGH_IMPEDANCE_DISABLE +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_HIGH_IMPEDANCE_ENABLE + +#define SYSCFG_FASTMODEPLUS_PB6 SBS_FASTMODEPLUS_PB6 +#define SYSCFG_FASTMODEPLUS_PB7 SBS_FASTMODEPLUS_PB7 +#define SYSCFG_FASTMODEPLUS_PB8 SBS_FASTMODEPLUS_PB8 +#define SYSCFG_FASTMODEPLUS_PB9 SBS_FASTMODEPLUS_PB9 + +#define SYSCFG_ETH_MII SBS_ETH_MII +#define SYSCFG_ETH_RMII SBS_ETH_RMII +#define IS_SYSCFG_ETHERNET_CONFIG IS_SBS_ETHERNET_CONFIG + +#define SYSCFG_MEMORIES_ERASE_FLAG_IPMEE SBS_MEMORIES_ERASE_FLAG_IPMEE +#define SYSCFG_MEMORIES_ERASE_FLAG_MCLR SBS_MEMORIES_ERASE_FLAG_MCLR +#define IS_SYSCFG_MEMORIES_ERASE_FLAG IS_SBS_MEMORIES_ERASE_FLAG + +#define IS_SYSCFG_CODE_CONFIG IS_SBS_CODE_CONFIG + +#define SYSCFG_MPU_NSEC SBS_MPU_NSEC +#define SYSCFG_VTOR_NSEC SBS_VTOR_NSEC +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#define SYSCFG_SAU SBS_SAU +#define SYSCFG_MPU_SEC SBS_MPU_SEC +#define SYSCFG_VTOR_AIRCR_SEC SBS_VTOR_AIRCR_SEC +#define SYSCFG_LOCK_ALL SBS_LOCK_ALL +#else +#define SYSCFG_LOCK_ALL SBS_LOCK_ALL +#endif /* __ARM_FEATURE_CMSE */ + +#define SYSCFG_CLK SBS_CLK +#define SYSCFG_CLASSB SBS_CLASSB +#define SYSCFG_FPU SBS_FPU +#define SYSCFG_ALL SBS_ALL + +#define SYSCFG_SEC SBS_SEC +#define SYSCFG_NSEC SBS_NSEC + +#define __HAL_SYSCFG_FPU_INTERRUPT_ENABLE __HAL_SBS_FPU_INTERRUPT_ENABLE +#define __HAL_SYSCFG_FPU_INTERRUPT_DISABLE __HAL_SBS_FPU_INTERRUPT_DISABLE + +#define __HAL_SYSCFG_BREAK_ECC_LOCK __HAL_SBS_BREAK_ECC_LOCK +#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK __HAL_SBS_BREAK_LOCKUP_LOCK +#define __HAL_SYSCFG_BREAK_PVD_LOCK __HAL_SBS_BREAK_PVD_LOCK +#define __HAL_SYSCFG_BREAK_SRAM_ECC_LOCK __HAL_SBS_BREAK_SRAM_ECC_LOCK + +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE __HAL_SBS_FASTMODEPLUS_ENABLE +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE __HAL_SBS_FASTMODEPLUS_DISABLE + +#define __HAL_SYSCFG_GET_MEMORIES_ERASE_STATUS __HAL_SBS_GET_MEMORIES_ERASE_STATUS +#define __HAL_SYSCFG_CLEAR_MEMORIES_ERASE_STATUS __HAL_SBS_CLEAR_MEMORIES_ERASE_STATUS + +#define IS_SYSCFG_FPU_INTERRUPT IS_SBS_FPU_INTERRUPT +#define IS_SYSCFG_BREAK_CONFIG IS_SBS_BREAK_CONFIG +#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE IS_VREFBUF_VOLTAGE_SCALE +#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE IS_VREFBUF_HIGH_IMPEDANCE +#define IS_SYSCFG_VREFBUF_TRIMMING IS_VREFBUF_TRIMMING +#define IS_SYSCFG_FASTMODEPLUS IS_SBS_FASTMODEPLUS +#define IS_SYSCFG_ITEMS_ATTRIBUTES IS_SBS_ITEMS_ATTRIBUTES +#define IS_SYSCFG_ATTRIBUTES IS_SBS_ATTRIBUTES +#define IS_SYSCFG_LOCK_ITEMS IS_SBS_LOCK_ITEMS + +#define HAL_SYSCFG_VREFBUF_VoltageScalingConfig HAL_VREFBUF_VoltageScalingConfig +#define HAL_SYSCFG_VREFBUF_HighImpedanceConfig HAL_VREFBUF_HighImpedanceConfig +#define HAL_SYSCFG_VREFBUF_TrimmingConfig HAL_VREFBUF_TrimmingConfig +#define HAL_SYSCFG_EnableVREFBUF HAL_EnableVREFBUF +#define HAL_SYSCFG_DisableVREFBUF HAL_DisableVREFBUF + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SBS_EnableIOAnalogSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SBS_DisableIOAnalogSwitchBooster +#define HAL_SYSCFG_ETHInterfaceSelect HAL_SBS_ETHInterfaceSelect + +#define HAL_SYSCFG_Lock HAL_SBS_Lock +#define HAL_SYSCFG_GetLock HAL_SBS_GetLock + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#define HAL_SYSCFG_ConfigAttributes HAL_SBS_ConfigAttributes +#define HAL_SYSCFG_GetConfigAttributes HAL_SBS_GetConfigAttributes +#endif /* __ARM_FEATURE_CMSE */ + +#endif /* STM32H5 */ + + +/** + * @} + */ + + +/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose + * @{ + */ +#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4) +#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE +#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE +#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 +#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 +#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) +#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE +#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE +#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 +#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 +#endif +/** + * @} + */ + +/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef +#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef +/** + * @} + */ + +/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose + * @{ + */ +#define GET_GPIO_SOURCE GPIO_GET_INDEX +#define GET_GPIO_INDEX GPIO_GET_INDEX + +#if defined(STM32F4) +#define GPIO_AF12_SDMMC GPIO_AF12_SDIO +#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO +#endif + +#if defined(STM32F7) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32L4) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32H7) +#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1 +#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1 +#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1 +#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 +#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 +#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 + +#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || \ + defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx) +#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS +#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS +#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS +#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || \ + STM32H757xx */ +#endif /* STM32H7 */ + +#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 +#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 +#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 + +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || \ + defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB || STM32U5*/ + +#if defined(STM32L1) +#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L1 */ + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#endif /* STM32F0 || STM32F3 || STM32F1 */ + +#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 + +#if defined(STM32U5) || defined(STM32H5) +#define GPIO_AF0_RTC_50Hz GPIO_AF0_RTC_50HZ +#endif /* STM32U5 || STM32H5 */ +#if defined(STM32U5) +#define GPIO_AF0_S2DSTOP GPIO_AF0_SRDSTOP +#define GPIO_AF11_LPGPIO GPIO_AF11_LPGPIO1 +#endif /* STM32U5 */ + +#if defined(STM32WBA) +#define GPIO_AF11_RF_ANTSW0 GPIO_AF11_RF +#define GPIO_AF11_RF_ANTSW1 GPIO_AF11_RF +#define GPIO_AF11_RF_ANTSW2 GPIO_AF11_RF +#define GPIO_AF11_RF_IO1 GPIO_AF11_RF +#define GPIO_AF11_RF_IO2 GPIO_AF11_RF +#define GPIO_AF11_RF_IO3 GPIO_AF11_RF +#define GPIO_AF11_RF_IO4 GPIO_AF11_RF +#define GPIO_AF11_RF_IO5 GPIO_AF11_RF +#define GPIO_AF11_RF_IO6 GPIO_AF11_RF +#define GPIO_AF11_RF_IO7 GPIO_AF11_RF +#define GPIO_AF11_RF_IO8 GPIO_AF11_RF +#define GPIO_AF11_RF_IO9 GPIO_AF11_RF +#endif /* STM32WBA */ +/** + * @} + */ + +/** @defgroup HAL_GTZC_Aliased_Defines HAL GTZC Aliased Defines maintained for legacy purpose + * @{ + */ +#if defined(STM32U5) +#define GTZC_PERIPH_DCMI GTZC_PERIPH_DCMI_PSSI +#define GTZC_PERIPH_LTDC GTZC_PERIPH_LTDCUSB +#endif /* STM32U5 */ +#if defined(STM32H5) +#define GTZC_PERIPH_DAC12 GTZC_PERIPH_DAC1 +#define GTZC_PERIPH_ADC12 GTZC_PERIPH_ADC +#define GTZC_PERIPH_USBFS GTZC_PERIPH_USB +#endif /* STM32H5 */ +#if defined(STM32H5) || defined(STM32U5) +#define GTZC_MCPBB_NB_VCTR_REG_MAX GTZC_MPCBB_NB_VCTR_REG_MAX +#define GTZC_MCPBB_NB_LCK_VCTR_REG_MAX GTZC_MPCBB_NB_LCK_VCTR_REG_MAX +#define GTZC_MCPBB_SUPERBLOCK_UNLOCKED GTZC_MPCBB_SUPERBLOCK_UNLOCKED +#define GTZC_MCPBB_SUPERBLOCK_LOCKED GTZC_MPCBB_SUPERBLOCK_LOCKED +#define GTZC_MCPBB_BLOCK_NSEC GTZC_MPCBB_BLOCK_NSEC +#define GTZC_MCPBB_BLOCK_SEC GTZC_MPCBB_BLOCK_SEC +#define GTZC_MCPBB_BLOCK_NPRIV GTZC_MPCBB_BLOCK_NPRIV +#define GTZC_MCPBB_BLOCK_PRIV GTZC_MPCBB_BLOCK_PRIV +#define GTZC_MCPBB_LOCK_OFF GTZC_MPCBB_LOCK_OFF +#define GTZC_MCPBB_LOCK_ON GTZC_MPCBB_LOCK_ON +#endif /* STM32H5 || STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 + +#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER +#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER +#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD +#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD +#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER +#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER +#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE +#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE + +#if defined(STM32G4) +#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig +#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable +#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable +#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset +#define HRTIM_TIMEEVENT_A HRTIM_EVENTCOUNTER_A +#define HRTIM_TIMEEVENT_B HRTIM_EVENTCOUNTER_B +#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL +#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL +#endif /* STM32G4 */ + +#if defined(STM32H7) +#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 + +#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 +#endif /* STM32H7 */ + +#if defined(STM32F3) +/** @brief Constants defining available sources associated to external events. + */ +#define HRTIM_EVENTSRC_1 (0x00000000U) +#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) +#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) +#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) + +/** @brief Constants defining the DLL calibration periods (in micro seconds) + */ +#define HRTIM_CALIBRATIONRATE_7300 0x00000000U +#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) +#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) +#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) + +#endif /* STM32F3 */ +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE +#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE +#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE +#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE +#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE +#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE +#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE +#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE +#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || \ + defined(STM32L1) || defined(STM32F7) +#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX +#endif +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE +#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define KR_KEY_RELOAD IWDG_KEY_RELOAD +#define KR_KEY_ENABLE IWDG_KEY_ENABLE +#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE +#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE +/** + * @} + */ + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ + +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION +#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS + +#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING +#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING +#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING + +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION +#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/* The following 3 definition have also been present in a temporary version of lptim.h */ +/* They need to be renamed also to the right name, just in case */ +#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS + + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_LPTIM_ReadCompare HAL_LPTIM_ReadCapturedValue +/** + * @} + */ + +#if defined(STM32U5) +#define LPTIM_ISR_CC1 LPTIM_ISR_CC1IF +#define LPTIM_ISR_CC2 LPTIM_ISR_CC2IF +#define LPTIM_CHANNEL_ALL 0x00000000U +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b +#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b +#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b +#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b + +#define NAND_AddressTypedef NAND_AddressTypeDef + +#define __ARRAY_ADDRESS ARRAY_ADDRESS +#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE +#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE +#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE +#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE +/** + * @} + */ + +/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose + * @{ + */ +#define NOR_StatusTypedef HAL_NOR_StatusTypeDef +#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS +#define NOR_ONGOING HAL_NOR_STATUS_ONGOING +#define NOR_ERROR HAL_NOR_STATUS_ERROR +#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT + +#define __NOR_WRITE NOR_WRITE +#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT +/** + * @} + */ + +/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose + * @{ + */ + +#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 +#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 +#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 +#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 + +#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 +#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 +#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 +#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 + +#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 +#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO +#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 +#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) || defined(STM32U5) +#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID +#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID +#endif + +#if defined(STM32L4) || defined(STM32L5) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALPOWER +#elif defined(STM32G4) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALSPEED +#endif + +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS + +#if defined(STM32H7) +#define I2S_IT_TXE I2S_IT_TXP +#define I2S_IT_RXNE I2S_IT_RXP + +#define I2S_FLAG_TXE I2S_FLAG_TXP +#define I2S_FLAG_RXNE I2S_FLAG_RXP +#endif + +#if defined(STM32F7) +#define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#endif +/** + * @} + */ + +/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose + * @{ + */ + +/* Compact Flash-ATA registers description */ +#define CF_DATA ATA_DATA +#define CF_SECTOR_COUNT ATA_SECTOR_COUNT +#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER +#define CF_CYLINDER_LOW ATA_CYLINDER_LOW +#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH +#define CF_CARD_HEAD ATA_CARD_HEAD +#define CF_STATUS_CMD ATA_STATUS_CMD +#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE +#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA + +/* Compact Flash-ATA commands */ +#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD +#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD +#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD +#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD + +#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef +#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS +#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING +#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR +#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FORMAT_BIN RTC_FORMAT_BIN +#define FORMAT_BCD RTC_FORMAT_BCD + +#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE +#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE +#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE + +#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE +#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE +#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT +#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT + +#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 + +#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE +#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 +#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 + +#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT +#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 +#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 + +#if defined(STM32H5) || defined(STM32H7RS) +#define TAMP_SECRETDEVICE_ERASE_NONE TAMP_DEVICESECRETS_ERASE_NONE +#define TAMP_SECRETDEVICE_ERASE_BKP_SRAM TAMP_DEVICESECRETS_ERASE_BKPSRAM +#endif /* STM32H5 || STM32H7RS */ + +#if defined(STM32WBA) +#define TAMP_SECRETDEVICE_ERASE_NONE TAMP_DEVICESECRETS_ERASE_NONE +#define TAMP_SECRETDEVICE_ERASE_SRAM2 TAMP_DEVICESECRETS_ERASE_SRAM2 +#define TAMP_SECRETDEVICE_ERASE_RHUK TAMP_DEVICESECRETS_ERASE_RHUK +#define TAMP_SECRETDEVICE_ERASE_ICACHE TAMP_DEVICESECRETS_ERASE_ICACHE +#define TAMP_SECRETDEVICE_ERASE_SAES_AES_HASH TAMP_DEVICESECRETS_ERASE_SAES_AES_HASH +#define TAMP_SECRETDEVICE_ERASE_PKA_SRAM TAMP_DEVICESECRETS_ERASE_PKA_SRAM +#define TAMP_SECRETDEVICE_ERASE_ALL TAMP_DEVICESECRETS_ERASE_ALL +#endif /* STM32WBA */ + +#if defined(STM32H5) || defined(STM32WBA) || defined(STM32H7RS) +#define TAMP_SECRETDEVICE_ERASE_DISABLE TAMP_DEVICESECRETS_ERASE_NONE +#define TAMP_SECRETDEVICE_ERASE_ENABLE TAMP_SECRETDEVICE_ERASE_ALL +#endif /* STM32H5 || STM32WBA || STM32H7RS */ + +#if defined(STM32F7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_ENABLE_BITS_MASK +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_IT_ENABLE_BITS_MASK +#endif /* STM32F7 */ + +#if defined(STM32H7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT +#endif /* STM32H7 */ + +#if defined(STM32F7) || defined(STM32H7) || defined(STM32L0) +#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 +#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 +#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMP +#endif /* STM32F7 || STM32H7 || STM32L0 */ + +/** + * @} + */ + + +/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE +#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE + +#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE +#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE + +#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE +#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE + +#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE +#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE +/** + * @} + */ + + +/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE +#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE +#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE +#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE +#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE +#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE +#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE +#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE +#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE +#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE +#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose + * @{ + */ +#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE +#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE + +#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE +#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE + +#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE +#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE + +#if defined(STM32H7) + +#define SPI_FLAG_TXE SPI_FLAG_TXP +#define SPI_FLAG_RXNE SPI_FLAG_RXP + +#define SPI_IT_TXE SPI_IT_TXP +#define SPI_IT_RXNE SPI_IT_RXP + +#define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET +#define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET +#define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET +#define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK +#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK + +#define TIM_DMABase_CR1 TIM_DMABASE_CR1 +#define TIM_DMABase_CR2 TIM_DMABASE_CR2 +#define TIM_DMABase_SMCR TIM_DMABASE_SMCR +#define TIM_DMABase_DIER TIM_DMABASE_DIER +#define TIM_DMABase_SR TIM_DMABASE_SR +#define TIM_DMABase_EGR TIM_DMABASE_EGR +#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 +#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 +#define TIM_DMABase_CCER TIM_DMABASE_CCER +#define TIM_DMABase_CNT TIM_DMABASE_CNT +#define TIM_DMABase_PSC TIM_DMABASE_PSC +#define TIM_DMABase_ARR TIM_DMABASE_ARR +#define TIM_DMABase_RCR TIM_DMABASE_RCR +#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 +#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 +#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 +#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 +#define TIM_DMABase_BDTR TIM_DMABASE_BDTR +#define TIM_DMABase_DCR TIM_DMABASE_DCR +#define TIM_DMABase_DMAR TIM_DMABASE_DMAR +#define TIM_DMABase_OR1 TIM_DMABASE_OR1 +#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 +#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 +#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 +#define TIM_DMABase_OR2 TIM_DMABASE_OR2 +#define TIM_DMABase_OR3 TIM_DMABASE_OR3 +#define TIM_DMABase_OR TIM_DMABASE_OR + +#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE +#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 +#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 +#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 +#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 +#define TIM_EventSource_COM TIM_EVENTSOURCE_COM +#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER +#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK +#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 + +#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER +#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS +#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS +#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS +#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS +#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS +#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS +#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS +#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS +#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS +#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS +#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS +#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS +#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS +#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS +#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS +#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS +#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS + +#if defined(STM32L0) +#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO +#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO +#endif + +#if defined(STM32F3) +#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE +#endif + +#if defined(STM32H7) +#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1 +#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2 +#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1 +#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2 +#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1 +#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2 +#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1 +#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1 +#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2 +#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1 +#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2 +#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2 +#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1 +#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2 +#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 +#endif + +#if defined(STM32U5) +#define OCREF_CLEAR_SELECT_Pos OCREF_CLEAR_SELECT_POS +#define OCREF_CLEAR_SELECT_Msk OCREF_CLEAR_SELECT_MSK +#endif +/** + * @} + */ + +/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose + * @{ + */ +#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING +#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose + * @{ + */ +#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE +#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE + +#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE +#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE + +#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 +#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 +#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 +#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 + +#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 +#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 +#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 +#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 + +#define __DIV_LPUART UART_DIV_LPUART + +#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE +#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose + * @{ + */ + +#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE +#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE + +#define USARTNACK_ENABLED USART_NACK_ENABLE +#define USARTNACK_DISABLED USART_NACK_DISABLE +/** + * @} + */ + +/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define CFR_BASE WWDG_CFR_BASE + +/** + * @} + */ + +/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose + * @{ + */ +#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 +#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME +#define INAK_TIMEOUT CAN_TIMEOUT_VALUE +#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE +#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) +#define CAN_TXSTATUS_OK ((uint8_t)0x01U) +#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) + +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define VLAN_TAG ETH_VLAN_TAG +#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD +#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD +#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD +#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK +#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK +#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK +#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK + +#define ETH_MMCCR 0x00000100U +#define ETH_MMCRIR 0x00000104U +#define ETH_MMCTIR 0x00000108U +#define ETH_MMCRIMR 0x0000010CU +#define ETH_MMCTIMR 0x00000110U +#define ETH_MMCTGFSCCR 0x0000014CU +#define ETH_MMCTGFMSCCR 0x00000150U +#define ETH_MMCTGFCR 0x00000168U +#define ETH_MMCRFCECR 0x00000194U +#define ETH_MMCRFAECR 0x00000198U +#define ETH_MMCRGUFCR 0x000001C4U + +#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ +#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ +#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ +#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ +#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to + the MAC transmitter) */ +#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from + MAC transmitter */ +#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus + or flushing the TxFIFO */ +#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status + of previous frame or IFG/backoff period to be over */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and + transmitting a Pause control frame (in full duplex mode) */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input + frame for transmission */ +#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ +#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ +#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control + de-activate threshold */ +#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control + activate threshold */ +#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ +#if defined(STM32F1) +#else +#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ +#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ +#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status + (or time-stamp) */ +#endif +#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and + status */ +#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ +#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ +#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ +#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ + +#define ETH_TxPacketConfig ETH_TxPacketConfigTypeDef /* Transmit Packet Configuration structure definition */ + +/** + * @} + */ + +/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR +#define DCMI_IT_OVF DCMI_IT_OVR +#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI +#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI + +#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop +#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop +#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop + +/** + * @} + */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) +/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose + * @{ + */ +#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 +#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 +#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 +#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 +#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 + +#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 +#define CM_RGB888 DMA2D_INPUT_RGB888 +#define CM_RGB565 DMA2D_INPUT_RGB565 +#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 +#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 +#define CM_L8 DMA2D_INPUT_L8 +#define CM_AL44 DMA2D_INPUT_AL44 +#define CM_AL88 DMA2D_INPUT_AL88 +#define CM_L4 DMA2D_INPUT_L4 +#define CM_A8 DMA2D_INPUT_A8 +#define CM_A4 DMA2D_INPUT_A4 +/** + * @} + */ +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) || defined(STM32U5) +/** @defgroup DMA2D_Aliases DMA2D API Aliases + * @{ + */ +#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort + for compatibility with legacy code */ +/** + * @} + */ + +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 || STM32U5 */ + +/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback +/** + * @} + */ + +/** @defgroup HAL_DCACHE_Aliased_Functions HAL DCACHE Aliased Functions maintained for legacy purpose + * @{ + */ + +#if defined(STM32U5) +#define HAL_DCACHE_CleanInvalidateByAddr HAL_DCACHE_CleanInvalidByAddr +#define HAL_DCACHE_CleanInvalidateByAddr_IT HAL_DCACHE_CleanInvalidByAddr_IT +#endif /* STM32U5 */ + +/** + * @} + */ + +#if !defined(STM32F2) +/** @defgroup HASH_alias HASH API alias + * @{ + */ +#define HAL_HASHEx_IRQHandler HAL_HASH_IRQHandler /*!< Redirection for compatibility with legacy code */ +/** + * + * @} + */ +#endif /* STM32F2 */ +/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef +#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef +#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish +#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish +#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish +#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish + +/*HASH Algorithm Selection*/ + +#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 +#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 +#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 +#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 + +#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH +#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC + +#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY +#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY + +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) + +#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt +#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End +#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT +#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT + +#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt +#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End +#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT +#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT + +#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt +#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End +#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT +#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT + +#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt +#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End +#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT +#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT + +#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode +#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode +#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode +#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode +#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode +#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\ + )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : \ + HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect +#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) +#if defined(STM32L0) +#else +#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) +#endif +#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\ + )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : \ + HAL_ADCEx_DisableVREFINTTempSensor()) +#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || \ + defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) +#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode +#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode +#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode +#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode +#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram +#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown +#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown +#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock +#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock +#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase +#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter +#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter +#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter +#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter + +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd) == ENABLE)? \ + HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): \ + HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) + +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || \ + defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || \ + defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT +#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT +#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT +#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || + STM32L4 || STM32L5 || STM32G4 || STM32L1 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || \ + defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA +#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA +#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA +#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ + +#if defined(STM32F4) +#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT +#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT +#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT +#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT +#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA +#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA +#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA +#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA +#endif /* STM32F4 */ +/** + * @} + */ + +/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose + * @{ + */ + +#if defined(STM32G0) +#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD +#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD +#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD +#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler +#endif +#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD +#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg +#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown +#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor +#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg +#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown +#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor +#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler +#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD +#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler +#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback +#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive +#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive +#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC +#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC +#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM + +#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL +#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING +#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING +#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING +#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING +#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING +#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING + +#define CR_OFFSET_BB PWR_CR_OFFSET_BB +#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB +#define PMODE_BIT_NUMBER VOS_BIT_NUMBER +#define CR_PMODE_BB CR_VOS_BB + +#define DBP_BitNumber DBP_BIT_NUMBER +#define PVDE_BitNumber PVDE_BIT_NUMBER +#define PMODE_BitNumber PMODE_BIT_NUMBER +#define EWUP_BitNumber EWUP_BIT_NUMBER +#define FPDS_BitNumber FPDS_BIT_NUMBER +#define ODEN_BitNumber ODEN_BIT_NUMBER +#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER +#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER +#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER +#define BRE_BitNumber BRE_BIT_NUMBER + +#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL + +#if defined (STM32U5) +#define PWR_SRAM1_PAGE1_STOP_RETENTION PWR_SRAM1_PAGE1_STOP +#define PWR_SRAM1_PAGE2_STOP_RETENTION PWR_SRAM1_PAGE2_STOP +#define PWR_SRAM1_PAGE3_STOP_RETENTION PWR_SRAM1_PAGE3_STOP +#define PWR_SRAM1_PAGE4_STOP_RETENTION PWR_SRAM1_PAGE4_STOP +#define PWR_SRAM1_PAGE5_STOP_RETENTION PWR_SRAM1_PAGE5_STOP +#define PWR_SRAM1_PAGE6_STOP_RETENTION PWR_SRAM1_PAGE6_STOP +#define PWR_SRAM1_PAGE7_STOP_RETENTION PWR_SRAM1_PAGE7_STOP +#define PWR_SRAM1_PAGE8_STOP_RETENTION PWR_SRAM1_PAGE8_STOP +#define PWR_SRAM1_PAGE9_STOP_RETENTION PWR_SRAM1_PAGE9_STOP +#define PWR_SRAM1_PAGE10_STOP_RETENTION PWR_SRAM1_PAGE10_STOP +#define PWR_SRAM1_PAGE11_STOP_RETENTION PWR_SRAM1_PAGE11_STOP +#define PWR_SRAM1_PAGE12_STOP_RETENTION PWR_SRAM1_PAGE12_STOP +#define PWR_SRAM1_FULL_STOP_RETENTION PWR_SRAM1_FULL_STOP + +#define PWR_SRAM2_PAGE1_STOP_RETENTION PWR_SRAM2_PAGE1_STOP +#define PWR_SRAM2_PAGE2_STOP_RETENTION PWR_SRAM2_PAGE2_STOP +#define PWR_SRAM2_FULL_STOP_RETENTION PWR_SRAM2_FULL_STOP + +#define PWR_SRAM3_PAGE1_STOP_RETENTION PWR_SRAM3_PAGE1_STOP +#define PWR_SRAM3_PAGE2_STOP_RETENTION PWR_SRAM3_PAGE2_STOP +#define PWR_SRAM3_PAGE3_STOP_RETENTION PWR_SRAM3_PAGE3_STOP +#define PWR_SRAM3_PAGE4_STOP_RETENTION PWR_SRAM3_PAGE4_STOP +#define PWR_SRAM3_PAGE5_STOP_RETENTION PWR_SRAM3_PAGE5_STOP +#define PWR_SRAM3_PAGE6_STOP_RETENTION PWR_SRAM3_PAGE6_STOP +#define PWR_SRAM3_PAGE7_STOP_RETENTION PWR_SRAM3_PAGE7_STOP +#define PWR_SRAM3_PAGE8_STOP_RETENTION PWR_SRAM3_PAGE8_STOP +#define PWR_SRAM3_PAGE9_STOP_RETENTION PWR_SRAM3_PAGE9_STOP +#define PWR_SRAM3_PAGE10_STOP_RETENTION PWR_SRAM3_PAGE10_STOP +#define PWR_SRAM3_PAGE11_STOP_RETENTION PWR_SRAM3_PAGE11_STOP +#define PWR_SRAM3_PAGE12_STOP_RETENTION PWR_SRAM3_PAGE12_STOP +#define PWR_SRAM3_PAGE13_STOP_RETENTION PWR_SRAM3_PAGE13_STOP +#define PWR_SRAM3_FULL_STOP_RETENTION PWR_SRAM3_FULL_STOP + +#define PWR_SRAM4_FULL_STOP_RETENTION PWR_SRAM4_FULL_STOP + +#define PWR_SRAM5_PAGE1_STOP_RETENTION PWR_SRAM5_PAGE1_STOP +#define PWR_SRAM5_PAGE2_STOP_RETENTION PWR_SRAM5_PAGE2_STOP +#define PWR_SRAM5_PAGE3_STOP_RETENTION PWR_SRAM5_PAGE3_STOP +#define PWR_SRAM5_PAGE4_STOP_RETENTION PWR_SRAM5_PAGE4_STOP +#define PWR_SRAM5_PAGE5_STOP_RETENTION PWR_SRAM5_PAGE5_STOP +#define PWR_SRAM5_PAGE6_STOP_RETENTION PWR_SRAM5_PAGE6_STOP +#define PWR_SRAM5_PAGE7_STOP_RETENTION PWR_SRAM5_PAGE7_STOP +#define PWR_SRAM5_PAGE8_STOP_RETENTION PWR_SRAM5_PAGE8_STOP +#define PWR_SRAM5_PAGE9_STOP_RETENTION PWR_SRAM5_PAGE9_STOP +#define PWR_SRAM5_PAGE10_STOP_RETENTION PWR_SRAM5_PAGE10_STOP +#define PWR_SRAM5_PAGE11_STOP_RETENTION PWR_SRAM5_PAGE11_STOP +#define PWR_SRAM5_PAGE12_STOP_RETENTION PWR_SRAM5_PAGE12_STOP +#define PWR_SRAM5_PAGE13_STOP_RETENTION PWR_SRAM5_PAGE13_STOP +#define PWR_SRAM5_FULL_STOP_RETENTION PWR_SRAM5_FULL_STOP + +#define PWR_SRAM6_PAGE1_STOP_RETENTION PWR_SRAM6_PAGE1_STOP +#define PWR_SRAM6_PAGE2_STOP_RETENTION PWR_SRAM6_PAGE2_STOP +#define PWR_SRAM6_PAGE3_STOP_RETENTION PWR_SRAM6_PAGE3_STOP +#define PWR_SRAM6_PAGE4_STOP_RETENTION PWR_SRAM6_PAGE4_STOP +#define PWR_SRAM6_PAGE5_STOP_RETENTION PWR_SRAM6_PAGE5_STOP +#define PWR_SRAM6_PAGE6_STOP_RETENTION PWR_SRAM6_PAGE6_STOP +#define PWR_SRAM6_PAGE7_STOP_RETENTION PWR_SRAM6_PAGE7_STOP +#define PWR_SRAM6_PAGE8_STOP_RETENTION PWR_SRAM6_PAGE8_STOP +#define PWR_SRAM6_FULL_STOP_RETENTION PWR_SRAM6_FULL_STOP + + +#define PWR_ICACHE_FULL_STOP_RETENTION PWR_ICACHE_FULL_STOP +#define PWR_DCACHE1_FULL_STOP_RETENTION PWR_DCACHE1_FULL_STOP +#define PWR_DCACHE2_FULL_STOP_RETENTION PWR_DCACHE2_FULL_STOP +#define PWR_DMA2DRAM_FULL_STOP_RETENTION PWR_DMA2DRAM_FULL_STOP +#define PWR_PERIPHRAM_FULL_STOP_RETENTION PWR_PERIPHRAM_FULL_STOP +#define PWR_PKA32RAM_FULL_STOP_RETENTION PWR_PKA32RAM_FULL_STOP +#define PWR_GRAPHICPRAM_FULL_STOP_RETENTION PWR_GRAPHICPRAM_FULL_STOP +#define PWR_DSIRAM_FULL_STOP_RETENTION PWR_DSIRAM_FULL_STOP +#define PWR_JPEGRAM_FULL_STOP_RETENTION PWR_JPEGRAM_FULL_STOP + + +#define PWR_SRAM2_PAGE1_STANDBY_RETENTION PWR_SRAM2_PAGE1_STANDBY +#define PWR_SRAM2_PAGE2_STANDBY_RETENTION PWR_SRAM2_PAGE2_STANDBY +#define PWR_SRAM2_FULL_STANDBY_RETENTION PWR_SRAM2_FULL_STANDBY + +#define PWR_SRAM1_FULL_RUN_RETENTION PWR_SRAM1_FULL_RUN +#define PWR_SRAM2_FULL_RUN_RETENTION PWR_SRAM2_FULL_RUN +#define PWR_SRAM3_FULL_RUN_RETENTION PWR_SRAM3_FULL_RUN +#define PWR_SRAM4_FULL_RUN_RETENTION PWR_SRAM4_FULL_RUN +#define PWR_SRAM5_FULL_RUN_RETENTION PWR_SRAM5_FULL_RUN +#define PWR_SRAM6_FULL_RUN_RETENTION PWR_SRAM6_FULL_RUN + +#define PWR_ALL_RAM_RUN_RETENTION_MASK PWR_ALL_RAM_RUN_MASK +#endif + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Functions HAL RTC Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined(STM32H5) || defined(STM32WBA) || defined(STM32H7RS) +#define HAL_RTCEx_SetBoothardwareKey HAL_RTCEx_LockBootHardwareKey +#define HAL_RTCEx_BKUPBlock_Enable HAL_RTCEx_BKUPBlock +#define HAL_RTCEx_BKUPBlock_Disable HAL_RTCEx_BKUPUnblock +#define HAL_RTCEx_Erase_SecretDev_Conf HAL_RTCEx_ConfigEraseDeviceSecrets +#endif /* STM32H5 || STM32WBA || STM32H7RS */ + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT +#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback +#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt +#define HAL_TIM_DMAError TIM_DMAError +#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt +#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt +#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || \ + defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) +#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro +#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT +#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback +#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent +#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT +#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA +#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */ +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback +#define HAL_LTDC_Relaod HAL_LTDC_Reload +#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig +#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig +/** + * @} + */ + + +/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose + * @{ + */ +#define AES_IT_CC CRYP_IT_CC +#define AES_IT_ERR CRYP_IT_ERR +#define AES_FLAG_CCF CRYP_FLAG_CCF +/** + * @} + */ + +/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE +#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH +#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH +#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM +#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC +#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM +#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC +#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI +#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK +#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG +#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG +#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE +#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE +#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE + +#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY +#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 +#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS +#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER +#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER + +/** + * @} + */ + + +/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __ADC_ENABLE __HAL_ADC_ENABLE +#define __ADC_DISABLE __HAL_ADC_DISABLE +#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS +#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS +#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE +#define __ADC_IS_ENABLED ADC_IS_ENABLE +#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR +#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR +#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING +#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE + +#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION +#define __HAL_ADC_JSQR_RK ADC_JSQR_RK +#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT +#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR +#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION +#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE +#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS +#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM +#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT +#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS +#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN +#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ +#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET +#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET +#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL +#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL +#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET +#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET +#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD + +#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION +#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER +#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI +#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER +#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER +#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE + +#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT +#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT +#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL +#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM +#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET +#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE +#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE +#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER + +#define __HAL_ADC_SQR1 ADC_SQR1 +#define __HAL_ADC_SMPR1 ADC_SMPR1 +#define __HAL_ADC_SMPR2 ADC_SMPR2 +#define __HAL_ADC_SQR3_RK ADC_SQR3_RK +#define __HAL_ADC_SQR2_RK ADC_SQR2_RK +#define __HAL_ADC_SQR1_RK ADC_SQR1_RK +#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS +#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS +#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV +#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection +#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq +#define __HAL_ADC_JSQR ADC_JSQR + +#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL +#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF +#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT +#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS +#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN +#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR +#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT +#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT +#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT +#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE + +/** + * @} + */ + +/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 +#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 +#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 +#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 +#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 +#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 +#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 +#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 +#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 +#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 +#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 +#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 +#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 +#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 +#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 +#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 + +#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 +#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 +#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 +#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 +#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 +#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 +#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 +#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 +#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 +#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 +#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 +#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 +#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 +#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 + + +#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 +#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 +#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 +#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 +#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 +#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 +#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC +#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC +#if defined(STM32H7) +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 +#else +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#endif /* STM32H7 */ +#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT +#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT +#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT +#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT +#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT +#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT +#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 +#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 +#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 +#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 +#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 +#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32F3) +#define COMP_START __HAL_COMP_ENABLE +#define COMP_STOP __HAL_COMP_DISABLE +#define COMP_LOCK __HAL_COMP_LOCK + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || \ + defined(STM32F334x8) || defined(STM32F328xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +#endif +#if defined(STM32F302xE) || defined(STM32F302xC) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +#endif +#if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP7_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) +#endif +#if defined(STM32F373xC) ||defined(STM32F378xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif +#else +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif + +#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE + +#if defined(STM32L0) || defined(STM32L4) +/* Note: On these STM32 families, the only argument of this macro */ +/* is COMP_FLAG_LOCK. */ +/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ +/* argument. */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) +#endif +/** + * @} + */ + +#if defined(STM32L0) || defined(STM32L4) +/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is + done into HAL_COMP_Init() */ +#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is + done into HAL_COMP_Init() */ +/** + * @} + */ +#endif + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_WRPAREA IS_OB_WRPAREA +#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM +#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM +#define IS_TYPEERASE IS_FLASH_TYPEERASE +#define IS_NBSECTORS IS_FLASH_NBSECTORS +#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 +#define __HAL_I2C_GENERATE_START I2C_GENERATE_START +#if defined(STM32F1) +#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE +#else +#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE +#endif /* STM32F1 */ +#define __HAL_I2C_RISE_TIME I2C_RISE_TIME +#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD +#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST +#define __HAL_I2C_SPEED I2C_SPEED +#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE +#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ +#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS +#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE +#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ +#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB +#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB +#define __HAL_I2C_FREQRANGE I2C_FREQRANGE +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE +#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT + +#if defined(STM32H7) +#define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __IRDA_DISABLE __HAL_IRDA_DISABLE +#define __IRDA_ENABLE __HAL_IRDA_ENABLE + +#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION +#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION + +#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE + + +/** + * @} + */ + + +/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS +#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS +/** + * @} + */ + + +/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT +#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT +#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE + +/** + * @} + */ + + +/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose + * @{ + */ +#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD +#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX +#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX +#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX +#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX +#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L +#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H +#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM +#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES +#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX +#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT +#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION +#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET + +/** + * @} + */ + + +/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE +#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE +#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine +#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig +#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) +#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2(); \ + HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); \ + } while(0) +#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2(); \ + HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); \ + } while(0) +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention +#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 +#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB +#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB + +#if defined (STM32F4) +#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() +#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() +#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() +#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() +#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() +#else +#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG +#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT +#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT +#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT +#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG +#endif /* STM32F4 */ +/** + * @} + */ + + +/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose + * @{ + */ + +#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI +#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI + +#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? \ + HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) + +#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE +#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE +#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE +#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE +#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET +#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET +#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE +#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE +#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET +#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET +#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE +#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE +#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE +#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE +#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET +#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET +#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE +#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE +#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET +#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET +#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE +#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE +#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE +#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE +#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET +#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET +#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET +#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET +#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET +#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET +#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET +#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET +#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET +#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET +#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET +#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET +#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET +#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET +#if defined(STM32C0) +#define __HAL_RCC_APB1_FORCE_RESET __HAL_RCC_APB1_GRP1_FORCE_RESET +#define __HAL_RCC_APB1_RELEASE_RESET __HAL_RCC_APB1_GRP1_RELEASE_RESET +#define __HAL_RCC_APB2_FORCE_RESET __HAL_RCC_APB1_GRP2_FORCE_RESET +#define __HAL_RCC_APB2_RELEASE_RESET __HAL_RCC_APB1_GRP2_RELEASE_RESET +#endif /* STM32C0 */ +#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE +#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE +#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET +#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET +#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE +#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE +#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE +#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE +#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET +#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET +#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE +#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE +#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE +#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE +#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET +#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET +#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE +#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE +#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET +#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET +#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE +#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE +#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE +#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE +#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET +#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET +#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE +#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE +#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET +#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET +#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE +#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE +#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE +#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE +#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET +#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET +#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE +#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE +#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET +#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET +#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE +#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE +#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE +#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE +#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET +#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET +#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE +#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE +#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE +#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE +#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET +#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET +#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE +#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE +#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE +#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE +#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET +#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET +#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE +#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE +#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET +#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET +#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE +#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE +#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE +#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE +#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE +#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE +#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE +#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE +#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE +#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE +#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET +#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET +#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE +#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE +#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET +#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET +#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE +#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE +#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE +#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE +#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE +#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE +#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET +#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET +#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE +#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE +#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE +#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE +#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE +#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE +#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET +#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET +#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE +#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE +#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE +#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE +#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET +#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET +#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE +#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE +#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE +#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE +#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET +#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET +#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE +#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE +#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE +#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE +#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET +#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET +#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE +#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE +#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE +#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE +#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET +#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET +#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE +#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE +#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE +#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE +#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET +#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET +#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE +#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE +#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE +#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE +#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET +#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET +#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE +#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE +#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE +#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE +#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET +#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET +#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE +#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE +#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE +#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE +#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET +#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET +#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE +#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE +#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE +#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE +#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET +#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET +#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE +#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE +#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE +#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE +#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET +#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET +#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE +#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE +#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE +#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE +#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET +#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET +#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE +#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE +#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE +#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE +#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET +#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET +#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE +#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE +#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE +#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE +#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET +#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET +#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE +#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE +#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE +#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE +#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET +#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET +#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE +#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE +#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE +#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE +#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET +#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET +#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE +#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE +#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE +#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE +#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET +#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET +#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE +#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE +#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE +#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE +#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET +#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET +#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE +#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE +#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE +#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE +#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET +#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET + +#if defined(STM32WB) +#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE +#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET +#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET +#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED +#define QSPI_IRQHandler QUADSPI_IRQHandler +#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */ + +#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE +#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE +#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE +#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE +#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET +#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET +#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE +#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE +#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE +#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE +#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET +#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET +#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE +#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE +#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE +#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE +#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET +#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET +#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE +#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE +#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE +#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE +#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET +#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET +#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE +#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE +#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE +#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE +#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET +#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET +#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE +#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE +#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE +#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE +#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET +#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET +#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE +#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE +#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE +#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE +#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET +#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET +#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE +#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE +#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE +#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE +#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE +#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE +#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE +#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE +#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE +#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE +#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET +#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET +#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE +#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE +#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE +#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE +#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET +#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET +#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE +#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE +#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE +#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE +#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET +#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET +#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE +#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE +#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET +#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET +#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE +#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE +#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET +#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET +#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE +#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE +#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET +#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET +#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE +#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE +#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET +#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET +#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE +#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE +#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET +#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET +#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE +#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE +#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE +#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE +#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET +#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET +#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE +#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE +#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE +#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE +#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET +#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET +#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE +#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE +#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE +#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE +#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET +#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET +#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE +#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE +#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE +#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE +#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET +#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET +#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE +#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE +#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE +#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE +#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET +#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET +#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE +#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE +#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE +#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE +#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET +#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET +#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE +#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE +#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE +#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE +#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET +#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET +#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE +#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE +#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE +#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE +#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET +#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET +#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE +#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE +#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE +#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE +#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET +#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET +#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE +#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE +#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE +#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE +#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET +#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET +#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE +#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE +#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET +#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET +#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE +#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE +#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE +#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE +#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET +#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET +#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE +#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE +#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE +#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE +#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET +#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET +#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE +#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE +#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE +#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE +#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET +#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET +#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE +#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE +#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE +#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE +#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET +#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET +#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE +#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE +#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET +#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE +#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE +#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE +#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE +#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET + +#if defined(STM32H7) +#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE +#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE + +#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/ +#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/ + + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED +#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED +#define RCC_SPI4CLKSOURCE_D2PCLK1 RCC_SPI4CLKSOURCE_D2PCLK2 +#define RCC_SPI5CLKSOURCE_D2PCLK1 RCC_SPI5CLKSOURCE_D2PCLK2 +#define RCC_SPI45CLKSOURCE_D2PCLK1 RCC_SPI45CLKSOURCE_D2PCLK2 +#define RCC_SPI45CLKSOURCE_CDPCLK1 RCC_SPI45CLKSOURCE_CDPCLK2 +#define RCC_SPI45CLKSOURCE_PCLK1 RCC_SPI45CLKSOURCE_PCLK2 +#endif + +#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE +#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE +#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE +#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE +#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET +#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET + +#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE +#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE +#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET +#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET +#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE +#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE +#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE +#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE +#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET +#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET +#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE +#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE +#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE +#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE +#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE +#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE +#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET +#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET +#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE +#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE + +#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET +#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE +#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE +#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE +#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE +#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE +#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE +#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE +#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE +#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE +#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE +#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE +#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE +#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE +#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET +#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET +#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE +#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE +#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE +#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE +#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE +#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET +#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET +#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE +#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE +#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE +#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE +#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET +#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET +#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE +#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE +#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE +#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE +#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET +#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET +#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE +#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE +#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE +#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE +#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE +#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE +#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE +#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE +#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE +#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE +#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE +#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE +#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE +#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE +#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE +#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE +#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE +#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE +#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE +#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET +#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET +#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE +#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE +#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE +#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE +#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET +#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET +#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE +#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE +#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE +#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE +#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET +#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET +#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE +#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE +#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE +#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE +#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET +#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET +#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE +#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE +#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE +#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE +#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET +#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE +#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE +#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE +#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE +#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE +#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE +#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET +#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET +#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE +#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE +#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE +#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE +#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE +#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE +#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED +#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED +#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE +#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE +#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE +#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE +#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE +#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE +#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE +#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET +#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET +#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE +#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE +#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE +#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE +#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET +#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET +#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE + +/* alias define maintained for legacy */ +#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET + +#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE +#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE +#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE +#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE +#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE +#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE +#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE +#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE +#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE +#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE +#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE +#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE +#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE +#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE +#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE +#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE +#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE +#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE + +#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET +#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET +#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET +#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET +#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET +#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET +#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET +#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET +#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET +#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET +#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET +#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET +#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET +#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET +#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET +#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET +#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET +#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET + +#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED +#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED +#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED +#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED +#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED +#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED +#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED +#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED +#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED +#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED +#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED +#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED +#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED +#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED +#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED +#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED +#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED +#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED +#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED +#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED +#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED +#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED +#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED +#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED +#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED +#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED +#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED +#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED +#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED +#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED +#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED +#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED +#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED +#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED +#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED +#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED +#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED +#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED +#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED +#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED +#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED +#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED +#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED +#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED +#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED +#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED +#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED +#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED +#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED +#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED +#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED +#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED +#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED +#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED +#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED +#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED +#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED +#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED +#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED +#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED +#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED +#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED +#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED +#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED +#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED +#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED +#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED +#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED +#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED +#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED +#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED +#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED +#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED +#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED +#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED +#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED +#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED +#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED +#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED +#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED +#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED +#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED +#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED +#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED +#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED +#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED +#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED +#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED +#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED +#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED +#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED +#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED +#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED +#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED +#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED +#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED +#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED +#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED +#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED +#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED +#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED +#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED +#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED +#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED +#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED +#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED +#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED +#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED +#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED +#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED +#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED +#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED +#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED +#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED + +#if defined(STM32L1) +#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#endif /* STM32L1 */ + +#if defined(STM32F4) +#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED +#define Sdmmc1ClockSelection SdioClockSelection +#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO +#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 +#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK +#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG +#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET +#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE +#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE +#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED +#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED +#define SdioClockSelection Sdmmc1ClockSelection +#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 +#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG +#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE +#endif + +#if defined(STM32F7) +#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 +#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK +#endif + +#if defined(STM32H7) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() +#endif + +#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG +#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG + +#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE + +#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE +#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE +#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK +#define IS_RCC_HCLK_DIV IS_RCC_PCLK +#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK + +#define RCC_IT_HSI14 RCC_IT_HSI14RDY + +#define RCC_IT_CSSLSE RCC_IT_LSECSS +#define RCC_IT_CSSHSE RCC_IT_CSS + +#define RCC_PLLMUL_3 RCC_PLL_MUL3 +#define RCC_PLLMUL_4 RCC_PLL_MUL4 +#define RCC_PLLMUL_6 RCC_PLL_MUL6 +#define RCC_PLLMUL_8 RCC_PLL_MUL8 +#define RCC_PLLMUL_12 RCC_PLL_MUL12 +#define RCC_PLLMUL_16 RCC_PLL_MUL16 +#define RCC_PLLMUL_24 RCC_PLL_MUL24 +#define RCC_PLLMUL_32 RCC_PLL_MUL32 +#define RCC_PLLMUL_48 RCC_PLL_MUL48 + +#define RCC_PLLDIV_2 RCC_PLL_DIV2 +#define RCC_PLLDIV_3 RCC_PLL_DIV3 +#define RCC_PLLDIV_4 RCC_PLL_DIV4 + +#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE +#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG +#define RCC_MCO_NODIV RCC_MCODIV_1 +#define RCC_MCO_DIV1 RCC_MCODIV_1 +#define RCC_MCO_DIV2 RCC_MCODIV_2 +#define RCC_MCO_DIV4 RCC_MCODIV_4 +#define RCC_MCO_DIV8 RCC_MCODIV_8 +#define RCC_MCO_DIV16 RCC_MCODIV_16 +#define RCC_MCO_DIV32 RCC_MCODIV_32 +#define RCC_MCO_DIV64 RCC_MCODIV_64 +#define RCC_MCO_DIV128 RCC_MCODIV_128 +#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK +#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI +#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE +#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK +#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI +#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 +#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 +#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE +#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 + +#if defined(STM32U0) +#define RCC_SYSCLKSOURCE_STATUS_PLLR RCC_SYSCLKSOURCE_STATUS_PLLCLK +#endif + +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || \ + defined(STM32WL) || defined(STM32C0) || defined(STM32H7RS) || defined(STM32U0) +#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE +#else +#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK +#endif + +#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 +#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL +#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI +#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 +#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 +#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 + +#define HSION_BitNumber RCC_HSION_BIT_NUMBER +#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER +#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER +#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER +#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER +#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER +#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER +#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER +#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER +#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER +#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER +#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER +#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER +#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER +#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER +#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER +#define LSION_BitNumber RCC_LSION_BIT_NUMBER +#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER +#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER +#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER +#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER +#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER +#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER +#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER +#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER +#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER +#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS +#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS +#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS +#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS +#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE +#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE + +#define CR_HSION_BB RCC_CR_HSION_BB +#define CR_CSSON_BB RCC_CR_CSSON_BB +#define CR_PLLON_BB RCC_CR_PLLON_BB +#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB +#define CR_MSION_BB RCC_CR_MSION_BB +#define CSR_LSION_BB RCC_CSR_LSION_BB +#define CSR_LSEON_BB RCC_CSR_LSEON_BB +#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB +#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB +#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB +#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB +#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB +#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB +#define CR_HSEON_BB RCC_CR_HSEON_BB +#define CSR_RMVF_BB RCC_CSR_RMVF_BB +#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB +#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB + +#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE +#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE +#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE +#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE +#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE + +#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT + +#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN +#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF + +#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 +#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ +#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP +#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ +#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE +#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 + +#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE +#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED +#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET +#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET +#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE +#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED +#define DfsdmClockSelection Dfsdm1ClockSelection +#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 +#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK +#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG +#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE +#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 +#if !defined(STM32U0) +#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 +#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 +#endif + +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 +#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 +#if defined(STM32U5) +#define MSIKPLLModeSEL RCC_MSIKPLL_MODE_SEL +#define MSISPLLModeSEL RCC_MSISPLL_MODE_SEL +#define __HAL_RCC_AHB21_CLK_DISABLE __HAL_RCC_AHB2_1_CLK_DISABLE +#define __HAL_RCC_AHB22_CLK_DISABLE __HAL_RCC_AHB2_2_CLK_DISABLE +#define __HAL_RCC_AHB1_CLK_Disable_Clear __HAL_RCC_AHB1_CLK_ENABLE +#define __HAL_RCC_AHB21_CLK_Disable_Clear __HAL_RCC_AHB2_1_CLK_ENABLE +#define __HAL_RCC_AHB22_CLK_Disable_Clear __HAL_RCC_AHB2_2_CLK_ENABLE +#define __HAL_RCC_AHB3_CLK_Disable_Clear __HAL_RCC_AHB3_CLK_ENABLE +#define __HAL_RCC_APB1_CLK_Disable_Clear __HAL_RCC_APB1_CLK_ENABLE +#define __HAL_RCC_APB2_CLK_Disable_Clear __HAL_RCC_APB2_CLK_ENABLE +#define __HAL_RCC_APB3_CLK_Disable_Clear __HAL_RCC_APB3_CLK_ENABLE +#define IS_RCC_MSIPLLModeSelection IS_RCC_MSIPLLMODE_SELECT +#define RCC_PERIPHCLK_CLK48 RCC_PERIPHCLK_ICLK +#define RCC_CLK48CLKSOURCE_HSI48 RCC_ICLK_CLKSOURCE_HSI48 +#define RCC_CLK48CLKSOURCE_PLL2 RCC_ICLK_CLKSOURCE_PLL2 +#define RCC_CLK48CLKSOURCE_PLL1 RCC_ICLK_CLKSOURCE_PLL1 +#define RCC_CLK48CLKSOURCE_MSIK RCC_ICLK_CLKSOURCE_MSIK +#define __HAL_RCC_ADC1_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __HAL_RCC_ADC1_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __HAL_RCC_ADC1_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __HAL_RCC_ADC1_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __HAL_RCC_ADC1_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __HAL_RCC_ADC1_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC12_CLK_SLEEP_ENABLE +#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC12_CLK_SLEEP_DISABLE +#define __HAL_RCC_GET_CLK48_SOURCE __HAL_RCC_GET_ICLK_SOURCE +#define __HAL_RCC_PLLFRACN_ENABLE __HAL_RCC_PLL_FRACN_ENABLE +#define __HAL_RCC_PLLFRACN_DISABLE __HAL_RCC_PLL_FRACN_DISABLE +#define __HAL_RCC_PLLFRACN_CONFIG __HAL_RCC_PLL_FRACN_CONFIG +#define IS_RCC_PLLFRACN_VALUE IS_RCC_PLL_FRACN_VALUE +#endif /* STM32U5 */ + +#if defined(STM32H5) +#define __HAL_RCC_PLLFRACN_ENABLE __HAL_RCC_PLL_FRACN_ENABLE +#define __HAL_RCC_PLLFRACN_DISABLE __HAL_RCC_PLL_FRACN_DISABLE +#define __HAL_RCC_PLLFRACN_CONFIG __HAL_RCC_PLL_FRACN_CONFIG +#define IS_RCC_PLLFRACN_VALUE IS_RCC_PLL_FRACN_VALUE + +#define RCC_PLLSOURCE_NONE RCC_PLL1_SOURCE_NONE +#define RCC_PLLSOURCE_HSI RCC_PLL1_SOURCE_HSI +#define RCC_PLLSOURCE_CSI RCC_PLL1_SOURCE_CSI +#define RCC_PLLSOURCE_HSE RCC_PLL1_SOURCE_HSE +#define RCC_PLLVCIRANGE_0 RCC_PLL1_VCIRANGE_0 +#define RCC_PLLVCIRANGE_1 RCC_PLL1_VCIRANGE_1 +#define RCC_PLLVCIRANGE_2 RCC_PLL1_VCIRANGE_2 +#define RCC_PLLVCIRANGE_3 RCC_PLL1_VCIRANGE_3 +#define RCC_PLL1VCOWIDE RCC_PLL1_VCORANGE_WIDE +#define RCC_PLL1VCOMEDIUM RCC_PLL1_VCORANGE_MEDIUM + +#define IS_RCC_PLLSOURCE IS_RCC_PLL1_SOURCE +#define IS_RCC_PLLRGE_VALUE IS_RCC_PLL1_VCIRGE_VALUE +#define IS_RCC_PLLVCORGE_VALUE IS_RCC_PLL1_VCORGE_VALUE +#define IS_RCC_PLLCLOCKOUT_VALUE IS_RCC_PLL1_CLOCKOUT_VALUE +#define IS_RCC_PLL_FRACN_VALUE IS_RCC_PLL1_FRACN_VALUE +#define IS_RCC_PLLM_VALUE IS_RCC_PLL1_DIVM_VALUE +#define IS_RCC_PLLN_VALUE IS_RCC_PLL1_MULN_VALUE +#define IS_RCC_PLLP_VALUE IS_RCC_PLL1_DIVP_VALUE +#define IS_RCC_PLLQ_VALUE IS_RCC_PLL1_DIVQ_VALUE +#define IS_RCC_PLLR_VALUE IS_RCC_PLL1_DIVR_VALUE + +#define __HAL_RCC_PLL_ENABLE __HAL_RCC_PLL1_ENABLE +#define __HAL_RCC_PLL_DISABLE __HAL_RCC_PLL1_DISABLE +#define __HAL_RCC_PLL_FRACN_ENABLE __HAL_RCC_PLL1_FRACN_ENABLE +#define __HAL_RCC_PLL_FRACN_DISABLE __HAL_RCC_PLL1_FRACN_DISABLE +#define __HAL_RCC_PLL_CONFIG __HAL_RCC_PLL1_CONFIG +#define __HAL_RCC_PLL_PLLSOURCE_CONFIG __HAL_RCC_PLL1_PLLSOURCE_CONFIG +#define __HAL_RCC_PLL_DIVM_CONFIG __HAL_RCC_PLL1_DIVM_CONFIG +#define __HAL_RCC_PLL_FRACN_CONFIG __HAL_RCC_PLL1_FRACN_CONFIG +#define __HAL_RCC_PLL_VCIRANGE __HAL_RCC_PLL1_VCIRANGE +#define __HAL_RCC_PLL_VCORANGE __HAL_RCC_PLL1_VCORANGE +#define __HAL_RCC_GET_PLL_OSCSOURCE __HAL_RCC_GET_PLL1_OSCSOURCE +#define __HAL_RCC_PLLCLKOUT_ENABLE __HAL_RCC_PLL1_CLKOUT_ENABLE +#define __HAL_RCC_PLLCLKOUT_DISABLE __HAL_RCC_PLL1_CLKOUT_DISABLE +#define __HAL_RCC_GET_PLLCLKOUT_CONFIG __HAL_RCC_GET_PLL1_CLKOUT_CONFIG + +#define __HAL_RCC_PLL2FRACN_ENABLE __HAL_RCC_PLL2_FRACN_ENABLE +#define __HAL_RCC_PLL2FRACN_DISABLE __HAL_RCC_PLL2_FRACN_DISABLE +#define __HAL_RCC_PLL2CLKOUT_ENABLE __HAL_RCC_PLL2_CLKOUT_ENABLE +#define __HAL_RCC_PLL2CLKOUT_DISABLE __HAL_RCC_PLL2_CLKOUT_DISABLE +#define __HAL_RCC_PLL2FRACN_CONFIG __HAL_RCC_PLL2_FRACN_CONFIG +#define __HAL_RCC_GET_PLL2CLKOUT_CONFIG __HAL_RCC_GET_PLL2_CLKOUT_CONFIG + +#define __HAL_RCC_PLL3FRACN_ENABLE __HAL_RCC_PLL3_FRACN_ENABLE +#define __HAL_RCC_PLL3FRACN_DISABLE __HAL_RCC_PLL3_FRACN_DISABLE +#define __HAL_RCC_PLL3CLKOUT_ENABLE __HAL_RCC_PLL3_CLKOUT_ENABLE +#define __HAL_RCC_PLL3CLKOUT_DISABLE __HAL_RCC_PLL3_CLKOUT_DISABLE +#define __HAL_RCC_PLL3FRACN_CONFIG __HAL_RCC_PLL3_FRACN_CONFIG +#define __HAL_RCC_GET_PLL3CLKOUT_CONFIG __HAL_RCC_GET_PLL3_CLKOUT_CONFIG + +#define RCC_PLL2VCIRANGE_0 RCC_PLL2_VCIRANGE_0 +#define RCC_PLL2VCIRANGE_1 RCC_PLL2_VCIRANGE_1 +#define RCC_PLL2VCIRANGE_2 RCC_PLL2_VCIRANGE_2 +#define RCC_PLL2VCIRANGE_3 RCC_PLL2_VCIRANGE_3 + +#define RCC_PLL2VCOWIDE RCC_PLL2_VCORANGE_WIDE +#define RCC_PLL2VCOMEDIUM RCC_PLL2_VCORANGE_MEDIUM + +#define RCC_PLL2SOURCE_NONE RCC_PLL2_SOURCE_NONE +#define RCC_PLL2SOURCE_HSI RCC_PLL2_SOURCE_HSI +#define RCC_PLL2SOURCE_CSI RCC_PLL2_SOURCE_CSI +#define RCC_PLL2SOURCE_HSE RCC_PLL2_SOURCE_HSE + +#define RCC_PLL3VCIRANGE_0 RCC_PLL3_VCIRANGE_0 +#define RCC_PLL3VCIRANGE_1 RCC_PLL3_VCIRANGE_1 +#define RCC_PLL3VCIRANGE_2 RCC_PLL3_VCIRANGE_2 +#define RCC_PLL3VCIRANGE_3 RCC_PLL3_VCIRANGE_3 + +#define RCC_PLL3VCOWIDE RCC_PLL3_VCORANGE_WIDE +#define RCC_PLL3VCOMEDIUM RCC_PLL3_VCORANGE_MEDIUM + +#define RCC_PLL3SOURCE_NONE RCC_PLL3_SOURCE_NONE +#define RCC_PLL3SOURCE_HSI RCC_PLL3_SOURCE_HSI +#define RCC_PLL3SOURCE_CSI RCC_PLL3_SOURCE_CSI +#define RCC_PLL3SOURCE_HSE RCC_PLL3_SOURCE_HSE + + +#endif /* STM32H5 */ + +/** + * @} + */ + +/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose + * @{ + */ +#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || \ + defined (STM32L4P5xx)|| defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5) || \ + defined (STM32WBA) || defined (STM32H5) || defined (STM32C0) || defined (STM32H7RS) || defined (STM32U0) +#else +#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG +#endif +#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT +#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT + +#if defined (STM32F1) +#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() + +#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() + +#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() + +#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() + +#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() +#else +#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) +#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) +#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) +#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) +#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) +#endif /* STM32F1 */ + +#if defined (STM32F0) || defined (STM32F2) || defined (STM32F3) || defined (STM32F4) || defined (STM32F7) || \ + defined (STM32H7) || \ + defined (STM32L0) || defined (STM32L1) || \ + defined (STM32WB) +#define __HAL_RTC_TAMPER_GET_IT __HAL_RTC_TAMPER_GET_FLAG +#endif + +#define IS_ALARM IS_RTC_ALARM +#define IS_ALARM_MASK IS_RTC_ALARM_MASK +#define IS_TAMPER IS_RTC_TAMPER +#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE +#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER +#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT +#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE +#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION +#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE +#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ +#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION +#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER +#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK +#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER + +#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE +#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE + +#if defined (STM32H5) +#define __HAL_RCC_RTCAPB_CLK_ENABLE __HAL_RCC_RTC_CLK_ENABLE +#define __HAL_RCC_RTCAPB_CLK_DISABLE __HAL_RCC_RTC_CLK_DISABLE +#endif /* STM32H5 */ + +/** + * @} + */ + +/** @defgroup HAL_SD_Aliased_Macros HAL SD/MMC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE +#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS + +#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32L1) +#define eMMC_HIGH_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE +#define eMMC_DUAL_VOLTAGE_RANGE EMMC_DUAL_VOLTAGE_RANGE +#define eMMC_LOW_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE + +#define SDMMC_NSpeed_CLK_DIV SDMMC_NSPEED_CLK_DIV +#define SDMMC_HSpeed_CLK_DIV SDMMC_HSPEED_CLK_DIV +#endif + +#if defined(STM32F4) || defined(STM32F2) +#define SD_SDMMC_DISABLED SD_SDIO_DISABLED +#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY +#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED +#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION +#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND +#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT +#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED +#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE +#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE +#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE +#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL +#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT +#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT +#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG +#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG +#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT +#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT +#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS +#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT +#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND +/* alias CMSIS */ +#define SDMMC1_IRQn SDIO_IRQn +#define SDMMC1_IRQHandler SDIO_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define SD_SDIO_DISABLED SD_SDMMC_DISABLED +#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY +#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED +#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION +#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND +#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT +#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED +#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE +#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE +#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE +#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE +#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT +#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT +#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG +#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG +#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT +#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT +#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +/* alias CMSIS for compatibilities */ +#define SDIO_IRQn SDMMC1_IRQn +#define SDIO_IRQHandler SDMMC1_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7) +#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef +#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef +#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef +#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef +#endif + +#if defined(STM32H7) || defined(STM32L5) +#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback +#endif +/** + * @} + */ + +/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT +#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT +#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE +#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE +#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE +#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE + +#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE +#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE + +#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 +#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 +#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START +#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH +#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR +#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE +#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE +#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_SPI_1LINE_TX SPI_1LINE_TX +#define __HAL_SPI_1LINE_RX SPI_1LINE_RX +#define __HAL_SPI_RESET_CRC SPI_RESET_CRC + +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION +#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION + +#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD + +#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE +#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT +#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT +#define __USART_ENABLE __HAL_USART_ENABLE +#define __USART_DISABLE __HAL_USART_DISABLE + +#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7) +#define USART_OVERSAMPLING_16 0x00000000U +#define USART_OVERSAMPLING_8 USART_CR1_OVER8 + +#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == USART_OVERSAMPLING_8)) +#endif /* STM32F0 || STM32F3 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose + * @{ + */ +#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE + +#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE +#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE +#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE + +#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE +#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE +#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE + +#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE + +#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT + +#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT + +#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup +#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup + +#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo +#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE +#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE + +#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE +#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT + +#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE + +#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN +#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER +#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER +#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER +#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD +#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD +#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION +#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION +#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER +#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER +#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE +#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE + +#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 + +#define TIM_OCMODE_ASSYMETRIC_PWM1 TIM_OCMODE_ASYMMETRIC_PWM1 +#define TIM_OCMODE_ASSYMETRIC_PWM2 TIM_OCMODE_ASYMMETRIC_PWM2 +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT +#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT +#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG +#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER + +#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE +#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE +#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_LTDC_LAYER LTDC_LAYER +#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG +/** + * @} + */ + +/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE +#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE +#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE +#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE +#define SAI_STREOMODE SAI_STEREOMODE +#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY +#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL +#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL +#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL +#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL +#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL +#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE +#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 +#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE +/** + * @} + */ + +/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32H7) +#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow +#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT +#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA +#endif +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3) +#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT +#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA +#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart +#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT +#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA +#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop +#endif +/** + * @} + */ + +/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) +#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE +#endif /* STM32L4 || STM32F4 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_Generic_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32F7) +#define ART_ACCLERATOR_ENABLE ART_ACCELERATOR_ENABLE +#endif /* STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_HAL_LEGACY */ + + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h new file mode 100644 index 0000000..32a8e85 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal.h @@ -0,0 +1,726 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_H +#define STM32L4xx_HAL_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_conf.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup HAL_Exported_Types HAL Exported Types + * @{ + */ + +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_BootMode Boot Mode + * @{ + */ +#define SYSCFG_BOOT_MAINFLASH 0U +#define SYSCFG_BOOT_SYSTEMFLASH SYSCFG_MEMRMP_MEM_MODE_0 + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define SYSCFG_BOOT_FMC SYSCFG_MEMRMP_MEM_MODE_1 +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || */ + /* STM32L496xx || STM32L4A6xx || */ + /* STM32L4P5xx || STM32L4Q5xx || */ + /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#define SYSCFG_BOOT_SRAM (SYSCFG_MEMRMP_MEM_MODE_1 | SYSCFG_MEMRMP_MEM_MODE_0) + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define SYSCFG_BOOT_OCTOPSPI1 (SYSCFG_MEMRMP_MEM_MODE_2) +#define SYSCFG_BOOT_OCTOPSPI2 (SYSCFG_MEMRMP_MEM_MODE_2 | SYSCFG_MEMRMP_MEM_MODE_0) +#else +#define SYSCFG_BOOT_QUADSPI (SYSCFG_MEMRMP_MEM_MODE_2 | SYSCFG_MEMRMP_MEM_MODE_1) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** + * @} + */ + +/** @defgroup SYSCFG_FPU_Interrupts FPU Interrupts + * @{ + */ +#define SYSCFG_IT_FPU_IOC SYSCFG_CFGR1_FPU_IE_0 /*!< Floating Point Unit Invalid operation Interrupt */ +#define SYSCFG_IT_FPU_DZC SYSCFG_CFGR1_FPU_IE_1 /*!< Floating Point Unit Divide-by-zero Interrupt */ +#define SYSCFG_IT_FPU_UFC SYSCFG_CFGR1_FPU_IE_2 /*!< Floating Point Unit Underflow Interrupt */ +#define SYSCFG_IT_FPU_OFC SYSCFG_CFGR1_FPU_IE_3 /*!< Floating Point Unit Overflow Interrupt */ +#define SYSCFG_IT_FPU_IDC SYSCFG_CFGR1_FPU_IE_4 /*!< Floating Point Unit Input denormal Interrupt */ +#define SYSCFG_IT_FPU_IXC SYSCFG_CFGR1_FPU_IE_5 /*!< Floating Point Unit Inexact Interrupt */ + +/** + * @} + */ + +/** @defgroup SYSCFG_SRAM2WRP SRAM2 Page Write protection (0 to 31) + * @{ + */ +#define SYSCFG_SRAM2WRP_PAGE0 SYSCFG_SWPR_PAGE0 /*!< SRAM2 Write protection page 0 */ +#define SYSCFG_SRAM2WRP_PAGE1 SYSCFG_SWPR_PAGE1 /*!< SRAM2 Write protection page 1 */ +#define SYSCFG_SRAM2WRP_PAGE2 SYSCFG_SWPR_PAGE2 /*!< SRAM2 Write protection page 2 */ +#define SYSCFG_SRAM2WRP_PAGE3 SYSCFG_SWPR_PAGE3 /*!< SRAM2 Write protection page 3 */ +#define SYSCFG_SRAM2WRP_PAGE4 SYSCFG_SWPR_PAGE4 /*!< SRAM2 Write protection page 4 */ +#define SYSCFG_SRAM2WRP_PAGE5 SYSCFG_SWPR_PAGE5 /*!< SRAM2 Write protection page 5 */ +#define SYSCFG_SRAM2WRP_PAGE6 SYSCFG_SWPR_PAGE6 /*!< SRAM2 Write protection page 6 */ +#define SYSCFG_SRAM2WRP_PAGE7 SYSCFG_SWPR_PAGE7 /*!< SRAM2 Write protection page 7 */ +#define SYSCFG_SRAM2WRP_PAGE8 SYSCFG_SWPR_PAGE8 /*!< SRAM2 Write protection page 8 */ +#define SYSCFG_SRAM2WRP_PAGE9 SYSCFG_SWPR_PAGE9 /*!< SRAM2 Write protection page 9 */ +#define SYSCFG_SRAM2WRP_PAGE10 SYSCFG_SWPR_PAGE10 /*!< SRAM2 Write protection page 10 */ +#define SYSCFG_SRAM2WRP_PAGE11 SYSCFG_SWPR_PAGE11 /*!< SRAM2 Write protection page 11 */ +#define SYSCFG_SRAM2WRP_PAGE12 SYSCFG_SWPR_PAGE12 /*!< SRAM2 Write protection page 12 */ +#define SYSCFG_SRAM2WRP_PAGE13 SYSCFG_SWPR_PAGE13 /*!< SRAM2 Write protection page 13 */ +#define SYSCFG_SRAM2WRP_PAGE14 SYSCFG_SWPR_PAGE14 /*!< SRAM2 Write protection page 14 */ +#define SYSCFG_SRAM2WRP_PAGE15 SYSCFG_SWPR_PAGE15 /*!< SRAM2 Write protection page 15 */ +#if defined(SYSCFG_SWPR_PAGE31) +#define SYSCFG_SRAM2WRP_PAGE16 SYSCFG_SWPR_PAGE16 /*!< SRAM2 Write protection page 16 */ +#define SYSCFG_SRAM2WRP_PAGE17 SYSCFG_SWPR_PAGE17 /*!< SRAM2 Write protection page 17 */ +#define SYSCFG_SRAM2WRP_PAGE18 SYSCFG_SWPR_PAGE18 /*!< SRAM2 Write protection page 18 */ +#define SYSCFG_SRAM2WRP_PAGE19 SYSCFG_SWPR_PAGE19 /*!< SRAM2 Write protection page 19 */ +#define SYSCFG_SRAM2WRP_PAGE20 SYSCFG_SWPR_PAGE20 /*!< SRAM2 Write protection page 20 */ +#define SYSCFG_SRAM2WRP_PAGE21 SYSCFG_SWPR_PAGE21 /*!< SRAM2 Write protection page 21 */ +#define SYSCFG_SRAM2WRP_PAGE22 SYSCFG_SWPR_PAGE22 /*!< SRAM2 Write protection page 22 */ +#define SYSCFG_SRAM2WRP_PAGE23 SYSCFG_SWPR_PAGE23 /*!< SRAM2 Write protection page 23 */ +#define SYSCFG_SRAM2WRP_PAGE24 SYSCFG_SWPR_PAGE24 /*!< SRAM2 Write protection page 24 */ +#define SYSCFG_SRAM2WRP_PAGE25 SYSCFG_SWPR_PAGE25 /*!< SRAM2 Write protection page 25 */ +#define SYSCFG_SRAM2WRP_PAGE26 SYSCFG_SWPR_PAGE26 /*!< SRAM2 Write protection page 26 */ +#define SYSCFG_SRAM2WRP_PAGE27 SYSCFG_SWPR_PAGE27 /*!< SRAM2 Write protection page 27 */ +#define SYSCFG_SRAM2WRP_PAGE28 SYSCFG_SWPR_PAGE28 /*!< SRAM2 Write protection page 28 */ +#define SYSCFG_SRAM2WRP_PAGE29 SYSCFG_SWPR_PAGE29 /*!< SRAM2 Write protection page 29 */ +#define SYSCFG_SRAM2WRP_PAGE30 SYSCFG_SWPR_PAGE30 /*!< SRAM2 Write protection page 30 */ +#define SYSCFG_SRAM2WRP_PAGE31 SYSCFG_SWPR_PAGE31 /*!< SRAM2 Write protection page 31 */ +#endif /* SYSCFG_SWPR_PAGE31 */ + +/** + * @} + */ + +#if defined(SYSCFG_SWPR2_PAGE63) +/** @defgroup SYSCFG_SRAM2WRP_32_63 SRAM2 Page Write protection (32 to 63) + * @{ + */ +#define SYSCFG_SRAM2WRP_PAGE32 SYSCFG_SWPR2_PAGE32 /*!< SRAM2 Write protection page 32 */ +#define SYSCFG_SRAM2WRP_PAGE33 SYSCFG_SWPR2_PAGE33 /*!< SRAM2 Write protection page 33 */ +#define SYSCFG_SRAM2WRP_PAGE34 SYSCFG_SWPR2_PAGE34 /*!< SRAM2 Write protection page 34 */ +#define SYSCFG_SRAM2WRP_PAGE35 SYSCFG_SWPR2_PAGE35 /*!< SRAM2 Write protection page 35 */ +#define SYSCFG_SRAM2WRP_PAGE36 SYSCFG_SWPR2_PAGE36 /*!< SRAM2 Write protection page 36 */ +#define SYSCFG_SRAM2WRP_PAGE37 SYSCFG_SWPR2_PAGE37 /*!< SRAM2 Write protection page 37 */ +#define SYSCFG_SRAM2WRP_PAGE38 SYSCFG_SWPR2_PAGE38 /*!< SRAM2 Write protection page 38 */ +#define SYSCFG_SRAM2WRP_PAGE39 SYSCFG_SWPR2_PAGE39 /*!< SRAM2 Write protection page 39 */ +#define SYSCFG_SRAM2WRP_PAGE40 SYSCFG_SWPR2_PAGE40 /*!< SRAM2 Write protection page 40 */ +#define SYSCFG_SRAM2WRP_PAGE41 SYSCFG_SWPR2_PAGE41 /*!< SRAM2 Write protection page 41 */ +#define SYSCFG_SRAM2WRP_PAGE42 SYSCFG_SWPR2_PAGE42 /*!< SRAM2 Write protection page 42 */ +#define SYSCFG_SRAM2WRP_PAGE43 SYSCFG_SWPR2_PAGE43 /*!< SRAM2 Write protection page 43 */ +#define SYSCFG_SRAM2WRP_PAGE44 SYSCFG_SWPR2_PAGE44 /*!< SRAM2 Write protection page 44 */ +#define SYSCFG_SRAM2WRP_PAGE45 SYSCFG_SWPR2_PAGE45 /*!< SRAM2 Write protection page 45 */ +#define SYSCFG_SRAM2WRP_PAGE46 SYSCFG_SWPR2_PAGE46 /*!< SRAM2 Write protection page 46 */ +#define SYSCFG_SRAM2WRP_PAGE47 SYSCFG_SWPR2_PAGE47 /*!< SRAM2 Write protection page 47 */ +#define SYSCFG_SRAM2WRP_PAGE48 SYSCFG_SWPR2_PAGE48 /*!< SRAM2 Write protection page 48 */ +#define SYSCFG_SRAM2WRP_PAGE49 SYSCFG_SWPR2_PAGE49 /*!< SRAM2 Write protection page 49 */ +#define SYSCFG_SRAM2WRP_PAGE50 SYSCFG_SWPR2_PAGE50 /*!< SRAM2 Write protection page 50 */ +#define SYSCFG_SRAM2WRP_PAGE51 SYSCFG_SWPR2_PAGE51 /*!< SRAM2 Write protection page 51 */ +#define SYSCFG_SRAM2WRP_PAGE52 SYSCFG_SWPR2_PAGE52 /*!< SRAM2 Write protection page 52 */ +#define SYSCFG_SRAM2WRP_PAGE53 SYSCFG_SWPR2_PAGE53 /*!< SRAM2 Write protection page 53 */ +#define SYSCFG_SRAM2WRP_PAGE54 SYSCFG_SWPR2_PAGE54 /*!< SRAM2 Write protection page 54 */ +#define SYSCFG_SRAM2WRP_PAGE55 SYSCFG_SWPR2_PAGE55 /*!< SRAM2 Write protection page 55 */ +#define SYSCFG_SRAM2WRP_PAGE56 SYSCFG_SWPR2_PAGE56 /*!< SRAM2 Write protection page 56 */ +#define SYSCFG_SRAM2WRP_PAGE57 SYSCFG_SWPR2_PAGE57 /*!< SRAM2 Write protection page 57 */ +#define SYSCFG_SRAM2WRP_PAGE58 SYSCFG_SWPR2_PAGE58 /*!< SRAM2 Write protection page 58 */ +#define SYSCFG_SRAM2WRP_PAGE59 SYSCFG_SWPR2_PAGE59 /*!< SRAM2 Write protection page 59 */ +#define SYSCFG_SRAM2WRP_PAGE60 SYSCFG_SWPR2_PAGE60 /*!< SRAM2 Write protection page 60 */ +#define SYSCFG_SRAM2WRP_PAGE61 SYSCFG_SWPR2_PAGE61 /*!< SRAM2 Write protection page 61 */ +#define SYSCFG_SRAM2WRP_PAGE62 SYSCFG_SWPR2_PAGE62 /*!< SRAM2 Write protection page 62 */ +#define SYSCFG_SRAM2WRP_PAGE63 SYSCFG_SWPR2_PAGE63 /*!< SRAM2 Write protection page 63 */ + +/** + * @} + */ +#endif /* SYSCFG_SWPR2_PAGE63 */ + +#if defined(VREFBUF) +/** @defgroup SYSCFG_VREFBUF_VoltageScale VREFBUF Voltage Scale + * @{ + */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE0 0U /*!< Voltage reference scale 0 (VREF_OUT1) */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS /*!< Voltage reference scale 1 (VREF_OUT2) */ + +/** + * @} + */ + +/** @defgroup SYSCFG_VREFBUF_HighImpedance VREFBUF High Impedance + * @{ + */ +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE 0U /*!< VREF_plus pin is internally connected to Voltage reference buffer output */ +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_CSR_HIZ /*!< VREF_plus pin is high impedance */ + +/** + * @} + */ +#endif /* VREFBUF */ + +/** @defgroup SYSCFG_flags_definition Flags + * @{ + */ + +#define SYSCFG_FLAG_SRAM2_PE SYSCFG_CFGR2_SPF /*!< SRAM2 parity error */ +#define SYSCFG_FLAG_SRAM2_BUSY SYSCFG_SCSR_SRAM2BSY /*!< SRAM2 busy by erase operation */ + +/** + * @} + */ + +/** @defgroup SYSCFG_FastModePlus_GPIO Fast-mode Plus on GPIO + * @{ + */ + +/** @brief Fast-mode Plus driving capability on a specific GPIO + */ +#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast-mode Plus on PB6 */ +#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast-mode Plus on PB7 */ +#if defined(SYSCFG_CFGR1_I2C_PB8_FMP) +#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast-mode Plus on PB8 */ +#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */ +#if defined(SYSCFG_CFGR1_I2C_PB9_FMP) +#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast-mode Plus on PB9 */ +#endif /* SYSCFG_CFGR1_I2C_PB9_FMP */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @defgroup DBGMCU_Exported_Macros DBGMCU Exported Macros + * @{ + */ + +/** @brief Freeze/Unfreeze Peripherals in Debug mode + */ +#if defined(DBGMCU_APB1FZR1_DBG_TIM2_STOP) +#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM2_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_TIM3_STOP) +#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM3_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM3_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_TIM4_STOP) +#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM4_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM4_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_TIM5_STOP) +#define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM5_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM5_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_TIM6_STOP) +#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM6_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM6_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_TIM7_STOP) +#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM7_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_TIM7_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_RTC_STOP) +#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_RTC_STOP) +#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_RTC_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_WWDG_STOP) +#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_WWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_WWDG_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_IWDG_STOP) +#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_IWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_IWDG_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_I2C1_STOP) +#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C1_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C1_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_I2C2_STOP) +#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C2_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C2_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_I2C3_STOP) +#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C3_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_I2C3_STOP) +#endif + +#if defined(DBGMCU_APB1FZR2_DBG_I2C4_STOP) +#define __HAL_DBGMCU_FREEZE_I2C4_TIMEOUT() SET_BIT(DBGMCU->APB1FZR2, DBGMCU_APB1FZR2_DBG_I2C4_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C4_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZR2, DBGMCU_APB1FZR2_DBG_I2C4_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_CAN_STOP) +#define __HAL_DBGMCU_FREEZE_CAN1() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_CAN_STOP) +#define __HAL_DBGMCU_UNFREEZE_CAN1() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_CAN_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_CAN2_STOP) +#define __HAL_DBGMCU_FREEZE_CAN2() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_CAN2_STOP) +#define __HAL_DBGMCU_UNFREEZE_CAN2() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_CAN2_STOP) +#endif + +#if defined(DBGMCU_APB1FZR1_DBG_LPTIM1_STOP) +#define __HAL_DBGMCU_FREEZE_LPTIM1() SET_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_LPTIM1_STOP) +#define __HAL_DBGMCU_UNFREEZE_LPTIM1() CLEAR_BIT(DBGMCU->APB1FZR1, DBGMCU_APB1FZR1_DBG_LPTIM1_STOP) +#endif + +#if defined(DBGMCU_APB1FZR2_DBG_LPTIM2_STOP) +#define __HAL_DBGMCU_FREEZE_LPTIM2() SET_BIT(DBGMCU->APB1FZR2, DBGMCU_APB1FZR2_DBG_LPTIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_LPTIM2() CLEAR_BIT(DBGMCU->APB1FZR2, DBGMCU_APB1FZR2_DBG_LPTIM2_STOP) +#endif + +#if defined(DBGMCU_APB2FZ_DBG_TIM1_STOP) +#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM1_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM1_STOP) +#endif + +#if defined(DBGMCU_APB2FZ_DBG_TIM8_STOP) +#define __HAL_DBGMCU_FREEZE_TIM8() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM8_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM8() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM8_STOP) +#endif + +#if defined(DBGMCU_APB2FZ_DBG_TIM15_STOP) +#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM15_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM15_STOP) +#endif + +#if defined(DBGMCU_APB2FZ_DBG_TIM16_STOP) +#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM16_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM16_STOP) +#endif + +#if defined(DBGMCU_APB2FZ_DBG_TIM17_STOP) +#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM17_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2FZ_DBG_TIM17_STOP) +#endif + +/** + * @} + */ + +/** @defgroup SYSCFG_Exported_Macros SYSCFG Exported Macros + * @{ + */ + +/** @brief Main Flash memory mapped at 0x00000000. + */ +#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE) + +/** @brief System Flash memory mapped at 0x00000000. + */ +#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_0) + +/** @brief Embedded SRAM mapped at 0x00000000. + */ +#define __HAL_SYSCFG_REMAPMEMORY_SRAM() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, (SYSCFG_MEMRMP_MEM_MODE_1|SYSCFG_MEMRMP_MEM_MODE_0)) + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + +/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000. + */ +#define __HAL_SYSCFG_REMAPMEMORY_FMC() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_1) + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || */ + /* STM32L496xx || STM32L4A6xx || */ + /* STM32L4P5xx || STM32L4Q5xx || */ + /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + +/** @brief OCTOSPI mapped at 0x00000000. + */ +#define __HAL_SYSCFG_REMAPMEMORY_OCTOSPI1() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, (SYSCFG_MEMRMP_MEM_MODE_2)) +#define __HAL_SYSCFG_REMAPMEMORY_OCTOSPI2() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, (SYSCFG_MEMRMP_MEM_MODE_2|SYSCFG_MEMRMP_MEM_MODE_0)) + +#else + +/** @brief QUADSPI mapped at 0x00000000. + */ +#define __HAL_SYSCFG_REMAPMEMORY_QUADSPI() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, (SYSCFG_MEMRMP_MEM_MODE_2|SYSCFG_MEMRMP_MEM_MODE_1)) + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** + * @brief Return the boot mode as configured by user. + * @retval The boot mode as configured by user. The returned value can be one + * of the following values: + * @arg @ref SYSCFG_BOOT_MAINFLASH + * @arg @ref SYSCFG_BOOT_SYSTEMFLASH + @if STM32L486xx + * @arg @ref SYSCFG_BOOT_FMC + @endif + * @arg @ref SYSCFG_BOOT_SRAM + @if STM32L422xx + * @arg @ref SYSCFG_BOOT_QUADSPI + @endif + @if STM32L443xx + * @arg @ref SYSCFG_BOOT_QUADSPI + @endif + @if STM32L462xx + * @arg @ref SYSCFG_BOOT_QUADSPI + @endif + @if STM32L486xx + * @arg @ref SYSCFG_BOOT_QUADSPI + @endif + */ +#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE) + +/** @brief SRAM2 page 0 to 31 write protection enable macro + * @param __SRAM2WRP__ This parameter can be a combination of values of @ref SYSCFG_SRAM2WRP + * @note Write protection can only be disabled by a system reset + */ +#define __HAL_SYSCFG_SRAM2_WRP_1_31_ENABLE(__SRAM2WRP__) do {assert_param(IS_SYSCFG_SRAM2WRP_PAGE((__SRAM2WRP__)));\ + SET_BIT(SYSCFG->SWPR, (__SRAM2WRP__));\ + }while(0) + +#if defined(SYSCFG_SWPR2_PAGE63) +/** @brief SRAM2 page 32 to 63 write protection enable macro + * @param __SRAM2WRP__ This parameter can be a combination of values of @ref SYSCFG_SRAM2WRP_32_63 + * @note Write protection can only be disabled by a system reset + */ +#define __HAL_SYSCFG_SRAM2_WRP_32_63_ENABLE(__SRAM2WRP__) do {assert_param(IS_SYSCFG_SRAM2WRP_PAGE((__SRAM2WRP__)));\ + SET_BIT(SYSCFG->SWPR2, (__SRAM2WRP__));\ + }while(0) +#endif /* SYSCFG_SWPR2_PAGE63 */ + +/** @brief SRAM2 page write protection unlock prior to erase + * @note Writing a wrong key reactivates the write protection + */ +#define __HAL_SYSCFG_SRAM2_WRP_UNLOCK() do {SYSCFG->SKR = 0xCA;\ + SYSCFG->SKR = 0x53;\ + }while(0) + +/** @brief SRAM2 erase + * @note __SYSCFG_GET_FLAG(SYSCFG_FLAG_SRAM2_BUSY) may be used to check end of erase + */ +#define __HAL_SYSCFG_SRAM2_ERASE() SET_BIT(SYSCFG->SCSR, SYSCFG_SCSR_SRAM2ER) + +/** @brief Floating Point Unit interrupt enable/disable macros + * @param __INTERRUPT__ This parameter can be a value of @ref SYSCFG_FPU_Interrupts + */ +#define __HAL_SYSCFG_FPU_INTERRUPT_ENABLE(__INTERRUPT__) do {assert_param(IS_SYSCFG_FPU_INTERRUPT((__INTERRUPT__)));\ + SET_BIT(SYSCFG->CFGR1, (__INTERRUPT__));\ + }while(0) + +#define __HAL_SYSCFG_FPU_INTERRUPT_DISABLE(__INTERRUPT__) do {assert_param(IS_SYSCFG_FPU_INTERRUPT((__INTERRUPT__)));\ + CLEAR_BIT(SYSCFG->CFGR1, (__INTERRUPT__));\ + }while(0) + +/** @brief SYSCFG Break ECC lock. + * Enable and lock the connection of Flash ECC error connection to TIM1/8/15/16/17 Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + */ +#define __HAL_SYSCFG_BREAK_ECC_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_ECCL) + +/** @brief SYSCFG Break Cortex-M4 Lockup lock. + * Enable and lock the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/8/15/16/17 Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + */ +#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL) + +/** @brief SYSCFG Break PVD lock. + * Enable and lock the PVD connection to Timer1/8/15/16/17 Break input, as well as the PVDE and PLS[2:0] in the PWR_CR2 register. + * @note The selected configuration is locked and can be unlocked only by system reset. + */ +#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_PVDL) + +/** @brief SYSCFG Break SRAM2 parity lock. + * Enable and lock the SRAM2 parity error signal connection to TIM1/8/15/16/17 Break input. + * @note The selected configuration is locked and can be unlocked by system reset. + */ +#define __HAL_SYSCFG_BREAK_SRAM2PARITY_LOCK() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPL) + +/** @brief Check SYSCFG flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref SYSCFG_FLAG_SRAM2_PE SRAM2 Parity Error Flag + * @arg @ref SYSCFG_FLAG_SRAM2_BUSY SRAM2 Erase Ongoing + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SYSCFG_GET_FLAG(__FLAG__) ((((((__FLAG__) == SYSCFG_SCSR_SRAM2BSY)? SYSCFG->SCSR : SYSCFG->CFGR2) & (__FLAG__))!= 0U) ? 1U : 0U) + +/** @brief Set the SPF bit to clear the SRAM Parity Error Flag. + */ +#define __HAL_SYSCFG_CLEAR_FLAG() SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF) + +/** @brief Fast-mode Plus driving capability enable/disable macros + * @param __FASTMODEPLUS__ This parameter can be a value of : + * @arg @ref SYSCFG_FASTMODEPLUS_PB6 Fast-mode Plus driving capability activation on PB6 + * @arg @ref SYSCFG_FASTMODEPLUS_PB7 Fast-mode Plus driving capability activation on PB7 + * @arg @ref SYSCFG_FASTMODEPLUS_PB8 Fast-mode Plus driving capability activation on PB8 + * @arg @ref SYSCFG_FASTMODEPLUS_PB9 Fast-mode Plus driving capability activation on PB9 + */ +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0) + +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\ + }while(0) + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ + +/** @defgroup SYSCFG_Private_Macros SYSCFG Private Macros + * @{ + */ + +#define IS_SYSCFG_FPU_INTERRUPT(__INTERRUPT__) ((((__INTERRUPT__) & SYSCFG_IT_FPU_IOC) == SYSCFG_IT_FPU_IOC) || \ + (((__INTERRUPT__) & SYSCFG_IT_FPU_DZC) == SYSCFG_IT_FPU_DZC) || \ + (((__INTERRUPT__) & SYSCFG_IT_FPU_UFC) == SYSCFG_IT_FPU_UFC) || \ + (((__INTERRUPT__) & SYSCFG_IT_FPU_OFC) == SYSCFG_IT_FPU_OFC) || \ + (((__INTERRUPT__) & SYSCFG_IT_FPU_IDC) == SYSCFG_IT_FPU_IDC) || \ + (((__INTERRUPT__) & SYSCFG_IT_FPU_IXC) == SYSCFG_IT_FPU_IXC)) + +#define IS_SYSCFG_BREAK_CONFIG(__CONFIG__) (((__CONFIG__) == SYSCFG_BREAK_ECC) || \ + ((__CONFIG__) == SYSCFG_BREAK_PVD) || \ + ((__CONFIG__) == SYSCFG_BREAK_SRAM2_PARITY) || \ + ((__CONFIG__) == SYSCFG_BREAK_LOCKUP)) + +#define IS_SYSCFG_SRAM2WRP_PAGE(__PAGE__) (((__PAGE__) > 0U) && ((__PAGE__) <= 0xFFFFFFFFUL)) + +#if defined(VREFBUF) +#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(__SCALE__) (((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE0) || \ + ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE1)) + +#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(__VALUE__) (((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE) || \ + ((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE)) + +#define IS_SYSCFG_VREFBUF_TRIMMING(__VALUE__) (((__VALUE__) > 0U) && ((__VALUE__) <= VREFBUF_CCR_TRIM)) +#endif /* VREFBUF */ + +#if defined(SYSCFG_FASTMODEPLUS_PB8) && defined(SYSCFG_FASTMODEPLUS_PB9) +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) +#elif defined(SYSCFG_FASTMODEPLUS_PB8) +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8)) +#elif defined(SYSCFG_FASTMODEPLUS_PB9) +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) +#else +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7)) +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported variables --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Variables + * @{ + */ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group3 + * @{ + */ + +/* DBGMCU Peripheral Control functions *****************************************/ +void HAL_DBGMCU_EnableDBGSleepMode(void); +void HAL_DBGMCU_DisableDBGSleepMode(void); +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group4 + * @{ + */ + +/* SYSCFG Control functions ****************************************************/ +void HAL_SYSCFG_SRAM2Erase(void); +void HAL_SYSCFG_EnableMemorySwappingBank(void); +void HAL_SYSCFG_DisableMemorySwappingBank(void); + +#if defined(VREFBUF) +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling); +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode); +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue); +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void); +void HAL_SYSCFG_DisableVREFBUF(void); +#endif /* VREFBUF */ + +void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void); +void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h new file mode 100644 index 0000000..be451ae --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_cortex.h @@ -0,0 +1,422 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_CORTEX_H +#define STM32L4xx_HAL_CORTEX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types CORTEX Exported Types + * @{ + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +}MPU_Region_InitTypeDef; +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group + * @{ + */ +#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bit for pre-emption priority, + 4 bits for subpriority */ +#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bit for pre-emption priority, + 3 bits for subpriority */ +#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority, + 2 bits for subpriority */ +#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority, + 1 bit for subpriority */ +#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority, + 0 bit for subpriority */ +/** + * @} + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U +#define SYSTICK_CLKSOURCE_HCLK 0x00000004U + +/** + * @} + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control CORTEX MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U +#define MPU_HARDFAULT_NMI (MPU_CTRL_HFNMIENA_Msk) +#define MPU_PRIVILEGED_DEFAULT (MPU_CTRL_PRIVDEFENA_Msk) +#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE ((uint8_t)0x01) +#define MPU_REGION_DISABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) +#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels CORTEX MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 ((uint8_t)0x00) +#define MPU_TEX_LEVEL1 ((uint8_t)0x01) +#define MPU_TEX_LEVEL2 ((uint8_t)0x02) +#define MPU_TEX_LEVEL4 ((uint8_t)0x04) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_32B ((uint8_t)0x04) +#define MPU_REGION_SIZE_64B ((uint8_t)0x05) +#define MPU_REGION_SIZE_128B ((uint8_t)0x06) +#define MPU_REGION_SIZE_256B ((uint8_t)0x07) +#define MPU_REGION_SIZE_512B ((uint8_t)0x08) +#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) +#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) +#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) +#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) +#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) +#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) +#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) +#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) +#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) +#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) +#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) +#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) +#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) +#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) +#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) +#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) +#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) +#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) +#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) +#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) +#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) +#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) +#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) +#define MPU_REGION_PRIV_RW ((uint8_t)0x01) +#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) +#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) +#define MPU_REGION_PRIV_RO ((uint8_t)0x05) +#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 ((uint8_t)0x00) +#define MPU_REGION_NUMBER1 ((uint8_t)0x01) +#define MPU_REGION_NUMBER2 ((uint8_t)0x02) +#define MPU_REGION_NUMBER3 ((uint8_t)0x03) +#define MPU_REGION_NUMBER4 ((uint8_t)0x04) +#define MPU_REGION_NUMBER5 ((uint8_t)0x05) +#define MPU_REGION_NUMBER6 ((uint8_t)0x06) +#define MPU_REGION_NUMBER7 ((uint8_t)0x07) +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and Configuration functions *****************************/ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); + +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +uint32_t HAL_NVIC_GetPriorityGrouping(void); +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); + +#if (__MPU_PRESENT == 1) +void HAL_MPU_Enable(uint32_t MPU_Control); +void HAL_MPU_Disable(void); +void HAL_MPU_EnableRegion(uint32_t RegionNumber); +void HAL_MPU_DisableRegion(uint32_t RegionNumber); +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ + ((GROUP) == NVIC_PRIORITYGROUP_1) || \ + ((GROUP) == NVIC_PRIORITYGROUP_2) || \ + ((GROUP) == NVIC_PRIORITYGROUP_3) || \ + ((GROUP) == NVIC_PRIORITYGROUP_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00) + +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) + +#if (__MPU_PRESENT == 1) +#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ + ((STATE) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ + ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ + ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ + ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ + ((TYPE) == MPU_TEX_LEVEL1) || \ + ((TYPE) == MPU_TEX_LEVEL2) || \ + ((TYPE) == MPU_TEX_LEVEL4)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RW) || \ + ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ + ((TYPE) == MPU_REGION_FULL_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RO) || \ + ((TYPE) == MPU_REGION_PRIV_RO_URO)) + +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7)) + +#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \ + ((SIZE) == MPU_REGION_SIZE_64B) || \ + ((SIZE) == MPU_REGION_SIZE_128B) || \ + ((SIZE) == MPU_REGION_SIZE_256B) || \ + ((SIZE) == MPU_REGION_SIZE_512B) || \ + ((SIZE) == MPU_REGION_SIZE_1KB) || \ + ((SIZE) == MPU_REGION_SIZE_2KB) || \ + ((SIZE) == MPU_REGION_SIZE_4KB) || \ + ((SIZE) == MPU_REGION_SIZE_8KB) || \ + ((SIZE) == MPU_REGION_SIZE_16KB) || \ + ((SIZE) == MPU_REGION_SIZE_32KB) || \ + ((SIZE) == MPU_REGION_SIZE_64KB) || \ + ((SIZE) == MPU_REGION_SIZE_128KB) || \ + ((SIZE) == MPU_REGION_SIZE_256KB) || \ + ((SIZE) == MPU_REGION_SIZE_512KB) || \ + ((SIZE) == MPU_REGION_SIZE_1MB) || \ + ((SIZE) == MPU_REGION_SIZE_2MB) || \ + ((SIZE) == MPU_REGION_SIZE_4MB) || \ + ((SIZE) == MPU_REGION_SIZE_8MB) || \ + ((SIZE) == MPU_REGION_SIZE_16MB) || \ + ((SIZE) == MPU_REGION_SIZE_32MB) || \ + ((SIZE) == MPU_REGION_SIZE_64MB) || \ + ((SIZE) == MPU_REGION_SIZE_128MB) || \ + ((SIZE) == MPU_REGION_SIZE_256MB) || \ + ((SIZE) == MPU_REGION_SIZE_512MB) || \ + ((SIZE) == MPU_REGION_SIZE_1GB) || \ + ((SIZE) == MPU_REGION_SIZE_2GB) || \ + ((SIZE) == MPU_REGION_SIZE_4GB)) + +#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF) +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_CORTEX_H */ + + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h new file mode 100644 index 0000000..82bf21e --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_def.h @@ -0,0 +1,211 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_DEF_H +#define STM32L4xx_HAL_DEF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" +#include "Legacy/stm32_hal_legacy.h" /* Aliases file for old names compatibility */ +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00, + HAL_ERROR = 0x01, + HAL_BUSY = 0x02, + HAL_TIMEOUT = 0x03 +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00, + HAL_LOCKED = 0x01 +} HAL_LockTypeDef; + +/* Exported macros -----------------------------------------------------------*/ + +#if !defined(UNUSED) +#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ +#endif /* UNUSED */ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0) + +/** @brief Reset the Handle's State field. + * @param __HANDLE__: specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handle's "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handle's "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0) + +#if (USE_RTOS == 1) + /* Reserved for future use */ + #error " USE_RTOS should be 0 in the current HAL release " +#else + #define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0) + + #define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0) +#endif /* USE_RTOS */ + + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif + #ifndef __packed + #define __packed __attribute__((packed)) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif /* __weak */ + #ifndef __packed + #define __packed __attribute__((__packed__)) + #endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif /* __ALIGN_BEGIN */ +#else + #ifndef __ALIGN_END + #define __ALIGN_END + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #if defined (__CC_ARM) /* ARM Compiler V5 */ + #define __ALIGN_BEGIN __align(4) + #elif defined (__ICCARM__) /* IAR Compiler */ + #define __ALIGN_BEGIN + #endif /* __CC_ARM */ + #endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + +/** + * @brief __RAM_FUNC definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) +/* ARM Compiler V4/V5 and V6 + -------------------------- + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc + +#elif defined ( __GNUC__ ) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC __attribute__((section(".RamFunc"))) + +#endif + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_DEF_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h new file mode 100644 index 0000000..586567d --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma.h @@ -0,0 +1,861 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_DMA_H +#define STM32L4xx_HAL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMA_Exported_Types DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Request; /*!< Specifies the request selected for the specified channel. + This parameter can be a value of @ref DMA_request */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_Priority_level */ +} DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */ +} HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ +} HAL_DMA_LevelCompleteTypeDef; + + +/** + * @brief HAL DMA Callback ID structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ +} HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + + DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ + + uint32_t ChannelIndex; /*!< DMA Channel Index */ + +#if defined(DMAMUX1) + DMAMUX_Channel_TypeDef *DMAmuxChannel; /*!< Register base address */ + + DMAMUX_ChannelStatus_TypeDef *DMAmuxChannelStatus; /*!< DMAMUX Channels Status Base Address */ + + uint32_t DMAmuxChannelStatusMask; /*!< DMAMUX Channel Status Mask */ + + DMAMUX_RequestGen_TypeDef *DMAmuxRequestGen; /*!< DMAMUX request generator Base Address */ + + DMAMUX_RequestGenStatus_TypeDef *DMAmuxRequestGenStatus; /*!< DMAMUX request generator Address */ + + uint32_t DMAmuxRequestGenStatusMask; /*!< DMAMUX request generator Status mask */ + +#endif /* DMAMUX1 */ + +} DMA_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ +#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< Abort requested with no Xfer ongoing */ +#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ +#define HAL_DMA_ERROR_SYNC 0x00000200U /*!< DMAMUX sync overrun error */ +#define HAL_DMA_ERROR_REQGEN 0x00000400U /*!< DMAMUX request generator overrun error */ + +/** + * @} + */ + +/** @defgroup DMA_request DMA request + * @{ + */ +#if !defined (DMAMUX1) + +#define DMA_REQUEST_0 0U +#define DMA_REQUEST_1 1U +#define DMA_REQUEST_2 2U +#define DMA_REQUEST_3 3U +#define DMA_REQUEST_4 4U +#define DMA_REQUEST_5 5U +#define DMA_REQUEST_6 6U +#define DMA_REQUEST_7 7U + +#endif + +#if defined(DMAMUX1) + +#define DMA_REQUEST_MEM2MEM 0U /*!< memory to memory transfer */ + +#define DMA_REQUEST_GENERATOR0 1U /*!< DMAMUX1 request generator 0 */ +#define DMA_REQUEST_GENERATOR1 2U /*!< DMAMUX1 request generator 1 */ +#define DMA_REQUEST_GENERATOR2 3U /*!< DMAMUX1 request generator 2 */ +#define DMA_REQUEST_GENERATOR3 4U /*!< DMAMUX1 request generator 3 */ + +#define DMA_REQUEST_ADC1 5U /*!< DMAMUX1 ADC1 request */ + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) + +#define DMA_REQUEST_ADC2 6U /*!< DMAMUX1 ADC1 request */ + +#define DMA_REQUEST_DAC1_CH1 7U /*!< DMAMUX1 DAC1 CH1 request */ +#define DMA_REQUEST_DAC1_CH2 8U /*!< DMAMUX1 DAC1 CH2 request */ + +#define DMA_REQUEST_TIM6_UP 9U /*!< DMAMUX1 TIM6 UP request */ +#define DMA_REQUEST_TIM7_UP 10U /*!< DMAMUX1 TIM7 UP request */ + +#define DMA_REQUEST_SPI1_RX 11U /*!< DMAMUX1 SPI1 RX request */ +#define DMA_REQUEST_SPI1_TX 12U /*!< DMAMUX1 SPI1 TX request */ +#define DMA_REQUEST_SPI2_RX 13U /*!< DMAMUX1 SPI2 RX request */ +#define DMA_REQUEST_SPI2_TX 14U /*!< DMAMUX1 SPI2 TX request */ +#define DMA_REQUEST_SPI3_RX 15U /*!< DMAMUX1 SPI3 RX request */ +#define DMA_REQUEST_SPI3_TX 16U /*!< DMAMUX1 SPI3 TX request */ + +#define DMA_REQUEST_I2C1_RX 17U /*!< DMAMUX1 I2C1 RX request */ +#define DMA_REQUEST_I2C1_TX 18U /*!< DMAMUX1 I2C1 TX request */ +#define DMA_REQUEST_I2C2_RX 19U /*!< DMAMUX1 I2C2 RX request */ +#define DMA_REQUEST_I2C2_TX 20U /*!< DMAMUX1 I2C2 TX request */ +#define DMA_REQUEST_I2C3_RX 21U /*!< DMAMUX1 I2C3 RX request */ +#define DMA_REQUEST_I2C3_TX 22U /*!< DMAMUX1 I2C3 TX request */ +#define DMA_REQUEST_I2C4_RX 23U /*!< DMAMUX1 I2C4 RX request */ +#define DMA_REQUEST_I2C4_TX 24U /*!< DMAMUX1 I2C4 TX request */ + +#define DMA_REQUEST_USART1_RX 25U /*!< DMAMUX1 USART1 RX request */ +#define DMA_REQUEST_USART1_TX 26U /*!< DMAMUX1 USART1 TX request */ +#define DMA_REQUEST_USART2_RX 27U /*!< DMAMUX1 USART2 RX request */ +#define DMA_REQUEST_USART2_TX 28U /*!< DMAMUX1 USART2 TX request */ +#define DMA_REQUEST_USART3_RX 29U /*!< DMAMUX1 USART3 RX request */ +#define DMA_REQUEST_USART3_TX 30U /*!< DMAMUX1 USART3 TX request */ + +#define DMA_REQUEST_UART4_RX 31U /*!< DMAMUX1 UART4 RX request */ +#define DMA_REQUEST_UART4_TX 32U /*!< DMAMUX1 UART4 TX request */ +#define DMA_REQUEST_UART5_RX 33U /*!< DMAMUX1 UART5 RX request */ +#define DMA_REQUEST_UART5_TX 34U /*!< DMAMUX1 UART5 TX request */ + +#define DMA_REQUEST_LPUART1_RX 35U /*!< DMAMUX1 LP_UART1_RX request */ +#define DMA_REQUEST_LPUART1_TX 36U /*!< DMAMUX1 LP_UART1_RX request */ + +#define DMA_REQUEST_SAI1_A 37U /*!< DMAMUX1 SAI1 A request */ +#define DMA_REQUEST_SAI1_B 38U /*!< DMAMUX1 SAI1 B request */ +#define DMA_REQUEST_SAI2_A 39U /*!< DMAMUX1 SAI2 A request */ +#define DMA_REQUEST_SAI2_B 40U /*!< DMAMUX1 SAI2 B request */ + +#define DMA_REQUEST_OCTOSPI1 41U /*!< DMAMUX1 OCTOSPI1 request */ +#define DMA_REQUEST_OCTOSPI2 42U /*!< DMAMUX1 OCTOSPI2 request */ + +#define DMA_REQUEST_TIM1_CH1 43U /*!< DMAMUX1 TIM1 CH1 request */ +#define DMA_REQUEST_TIM1_CH2 44U /*!< DMAMUX1 TIM1 CH2 request */ +#define DMA_REQUEST_TIM1_CH3 45U /*!< DMAMUX1 TIM1 CH3 request */ +#define DMA_REQUEST_TIM1_CH4 46U /*!< DMAMUX1 TIM1 CH4 request */ +#define DMA_REQUEST_TIM1_UP 47U /*!< DMAMUX1 TIM1 UP request */ +#define DMA_REQUEST_TIM1_TRIG 48U /*!< DMAMUX1 TIM1 TRIG request */ +#define DMA_REQUEST_TIM1_COM 49U /*!< DMAMUX1 TIM1 COM request */ + +#define DMA_REQUEST_TIM8_CH1 50U /*!< DMAMUX1 TIM8 CH1 request */ +#define DMA_REQUEST_TIM8_CH2 51U /*!< DMAMUX1 TIM8 CH2 request */ +#define DMA_REQUEST_TIM8_CH3 52U /*!< DMAMUX1 TIM8 CH3 request */ +#define DMA_REQUEST_TIM8_CH4 53U /*!< DMAMUX1 TIM8 CH4 request */ +#define DMA_REQUEST_TIM8_UP 54U /*!< DMAMUX1 TIM8 UP request */ +#define DMA_REQUEST_TIM8_TRIG 55U /*!< DMAMUX1 TIM8 TRIG request */ +#define DMA_REQUEST_TIM8_COM 56U /*!< DMAMUX1 TIM8 COM request */ + +#define DMA_REQUEST_TIM2_CH1 57U /*!< DMAMUX1 TIM2 CH1 request */ +#define DMA_REQUEST_TIM2_CH2 58U /*!< DMAMUX1 TIM2 CH2 request */ +#define DMA_REQUEST_TIM2_CH3 59U /*!< DMAMUX1 TIM2 CH3 request */ +#define DMA_REQUEST_TIM2_CH4 60U /*!< DMAMUX1 TIM2 CH4 request */ +#define DMA_REQUEST_TIM2_UP 61U /*!< DMAMUX1 TIM2 UP request */ + +#define DMA_REQUEST_TIM3_CH1 62U /*!< DMAMUX1 TIM3 CH1 request */ +#define DMA_REQUEST_TIM3_CH2 63U /*!< DMAMUX1 TIM3 CH2 request */ +#define DMA_REQUEST_TIM3_CH3 64U /*!< DMAMUX1 TIM3 CH3 request */ +#define DMA_REQUEST_TIM3_CH4 65U /*!< DMAMUX1 TIM3 CH4 request */ +#define DMA_REQUEST_TIM3_UP 66U /*!< DMAMUX1 TIM3 UP request */ +#define DMA_REQUEST_TIM3_TRIG 67U /*!< DMAMUX1 TIM3 TRIG request */ + +#define DMA_REQUEST_TIM4_CH1 68U /*!< DMAMUX1 TIM4 CH1 request */ +#define DMA_REQUEST_TIM4_CH2 69U /*!< DMAMUX1 TIM4 CH2 request */ +#define DMA_REQUEST_TIM4_CH3 70U /*!< DMAMUX1 TIM4 CH3 request */ +#define DMA_REQUEST_TIM4_CH4 71U /*!< DMAMUX1 TIM4 CH4 request */ +#define DMA_REQUEST_TIM4_UP 72U /*!< DMAMUX1 TIM4 UP request */ + +#define DMA_REQUEST_TIM5_CH1 73U /*!< DMAMUX1 TIM5 CH1 request */ +#define DMA_REQUEST_TIM5_CH2 74U /*!< DMAMUX1 TIM5 CH2 request */ +#define DMA_REQUEST_TIM5_CH3 75U /*!< DMAMUX1 TIM5 CH3 request */ +#define DMA_REQUEST_TIM5_CH4 76U /*!< DMAMUX1 TIM5 CH4 request */ +#define DMA_REQUEST_TIM5_UP 77U /*!< DMAMUX1 TIM5 UP request */ +#define DMA_REQUEST_TIM5_TRIG 78U /*!< DMAMUX1 TIM5 TRIG request */ + +#define DMA_REQUEST_TIM15_CH1 79U /*!< DMAMUX1 TIM15 CH1 request */ +#define DMA_REQUEST_TIM15_UP 80U /*!< DMAMUX1 TIM15 UP request */ +#define DMA_REQUEST_TIM15_TRIG 81U /*!< DMAMUX1 TIM15 TRIG request */ +#define DMA_REQUEST_TIM15_COM 82U /*!< DMAMUX1 TIM15 COM request */ + +#define DMA_REQUEST_TIM16_CH1 83U /*!< DMAMUX1 TIM16 CH1 request */ +#define DMA_REQUEST_TIM16_UP 84U /*!< DMAMUX1 TIM16 UP request */ +#define DMA_REQUEST_TIM17_CH1 85U /*!< DMAMUX1 TIM17 CH1 request */ +#define DMA_REQUEST_TIM17_UP 86U /*!< DMAMUX1 TIM17 UP request */ + +#define DMA_REQUEST_DFSDM1_FLT0 87U /*!< DMAMUX1 DFSDM1 Filter0 request */ +#define DMA_REQUEST_DFSDM1_FLT1 88U /*!< DMAMUX1 DFSDM1 Filter1 request */ + +#define DMA_REQUEST_DCMI 91U /*!< DMAMUX1 DCMI request */ +#define DMA_REQUEST_DCMI_PSSI 91U /*!< DMAMUX1 DCMI/PSSI request */ + +#define DMA_REQUEST_AES_IN 92U /*!< DMAMUX1 AES IN request */ +#define DMA_REQUEST_AES_OUT 93U /*!< DMAMUX1 AES OUT request */ + +#define DMA_REQUEST_HASH_IN 94U /*!< DMAMUX1 HASH IN request */ + +#else + +#define DMA_REQUEST_DAC1_CH1 6U /*!< DMAMUX1 DAC1 CH1 request */ +#define DMA_REQUEST_DAC1_CH2 7U /*!< DMAMUX1 DAC1 CH2 request */ + +#define DMA_REQUEST_TIM6_UP 8U /*!< DMAMUX1 TIM6 UP request */ +#define DMA_REQUEST_TIM7_UP 9U /*!< DMAMUX1 TIM7 UP request */ + +#define DMA_REQUEST_SPI1_RX 10U /*!< DMAMUX1 SPI1 RX request */ +#define DMA_REQUEST_SPI1_TX 11U /*!< DMAMUX1 SPI1 TX request */ +#define DMA_REQUEST_SPI2_RX 12U /*!< DMAMUX1 SPI2 RX request */ +#define DMA_REQUEST_SPI2_TX 13U /*!< DMAMUX1 SPI2 TX request */ +#define DMA_REQUEST_SPI3_RX 14U /*!< DMAMUX1 SPI3 RX request */ +#define DMA_REQUEST_SPI3_TX 15U /*!< DMAMUX1 SPI3 TX request */ + +#define DMA_REQUEST_I2C1_RX 16U /*!< DMAMUX1 I2C1 RX request */ +#define DMA_REQUEST_I2C1_TX 17U /*!< DMAMUX1 I2C1 TX request */ +#define DMA_REQUEST_I2C2_RX 18U /*!< DMAMUX1 I2C2 RX request */ +#define DMA_REQUEST_I2C2_TX 19U /*!< DMAMUX1 I2C2 TX request */ +#define DMA_REQUEST_I2C3_RX 20U /*!< DMAMUX1 I2C3 RX request */ +#define DMA_REQUEST_I2C3_TX 21U /*!< DMAMUX1 I2C3 TX request */ +#define DMA_REQUEST_I2C4_RX 22U /*!< DMAMUX1 I2C4 RX request */ +#define DMA_REQUEST_I2C4_TX 23U /*!< DMAMUX1 I2C4 TX request */ + +#define DMA_REQUEST_USART1_RX 24U /*!< DMAMUX1 USART1 RX request */ +#define DMA_REQUEST_USART1_TX 25U /*!< DMAMUX1 USART1 TX request */ +#define DMA_REQUEST_USART2_RX 26U /*!< DMAMUX1 USART2 RX request */ +#define DMA_REQUEST_USART2_TX 27U /*!< DMAMUX1 USART2 TX request */ +#define DMA_REQUEST_USART3_RX 28U /*!< DMAMUX1 USART3 RX request */ +#define DMA_REQUEST_USART3_TX 29U /*!< DMAMUX1 USART3 TX request */ + +#define DMA_REQUEST_UART4_RX 30U /*!< DMAMUX1 UART4 RX request */ +#define DMA_REQUEST_UART4_TX 31U /*!< DMAMUX1 UART4 TX request */ +#define DMA_REQUEST_UART5_RX 32U /*!< DMAMUX1 UART5 RX request */ +#define DMA_REQUEST_UART5_TX 33U /*!< DMAMUX1 UART5 TX request */ + +#define DMA_REQUEST_LPUART1_RX 34U /*!< DMAMUX1 LP_UART1_RX request */ +#define DMA_REQUEST_LPUART1_TX 35U /*!< DMAMUX1 LP_UART1_RX request */ + +#define DMA_REQUEST_SAI1_A 36U /*!< DMAMUX1 SAI1 A request */ +#define DMA_REQUEST_SAI1_B 37U /*!< DMAMUX1 SAI1 B request */ +#define DMA_REQUEST_SAI2_A 38U /*!< DMAMUX1 SAI2 A request */ +#define DMA_REQUEST_SAI2_B 39U /*!< DMAMUX1 SAI2 B request */ + +#define DMA_REQUEST_OCTOSPI1 40U /*!< DMAMUX1 OCTOSPI1 request */ +#define DMA_REQUEST_OCTOSPI2 41U /*!< DMAMUX1 OCTOSPI2 request */ + +#define DMA_REQUEST_TIM1_CH1 42U /*!< DMAMUX1 TIM1 CH1 request */ +#define DMA_REQUEST_TIM1_CH2 43U /*!< DMAMUX1 TIM1 CH2 request */ +#define DMA_REQUEST_TIM1_CH3 44U /*!< DMAMUX1 TIM1 CH3 request */ +#define DMA_REQUEST_TIM1_CH4 45U /*!< DMAMUX1 TIM1 CH4 request */ +#define DMA_REQUEST_TIM1_UP 46U /*!< DMAMUX1 TIM1 UP request */ +#define DMA_REQUEST_TIM1_TRIG 47U /*!< DMAMUX1 TIM1 TRIG request */ +#define DMA_REQUEST_TIM1_COM 48U /*!< DMAMUX1 TIM1 COM request */ + +#define DMA_REQUEST_TIM8_CH1 49U /*!< DMAMUX1 TIM8 CH1 request */ +#define DMA_REQUEST_TIM8_CH2 50U /*!< DMAMUX1 TIM8 CH2 request */ +#define DMA_REQUEST_TIM8_CH3 51U /*!< DMAMUX1 TIM8 CH3 request */ +#define DMA_REQUEST_TIM8_CH4 52U /*!< DMAMUX1 TIM8 CH4 request */ +#define DMA_REQUEST_TIM8_UP 53U /*!< DMAMUX1 TIM8 UP request */ +#define DMA_REQUEST_TIM8_TRIG 54U /*!< DMAMUX1 TIM8 TRIG request */ +#define DMA_REQUEST_TIM8_COM 55U /*!< DMAMUX1 TIM8 COM request */ + +#define DMA_REQUEST_TIM2_CH1 56U /*!< DMAMUX1 TIM2 CH1 request */ +#define DMA_REQUEST_TIM2_CH2 57U /*!< DMAMUX1 TIM2 CH2 request */ +#define DMA_REQUEST_TIM2_CH3 58U /*!< DMAMUX1 TIM2 CH3 request */ +#define DMA_REQUEST_TIM2_CH4 59U /*!< DMAMUX1 TIM2 CH4 request */ +#define DMA_REQUEST_TIM2_UP 60U /*!< DMAMUX1 TIM2 UP request */ + +#define DMA_REQUEST_TIM3_CH1 61U /*!< DMAMUX1 TIM3 CH1 request */ +#define DMA_REQUEST_TIM3_CH2 62U /*!< DMAMUX1 TIM3 CH2 request */ +#define DMA_REQUEST_TIM3_CH3 63U /*!< DMAMUX1 TIM3 CH3 request */ +#define DMA_REQUEST_TIM3_CH4 64U /*!< DMAMUX1 TIM3 CH4 request */ +#define DMA_REQUEST_TIM3_UP 65U /*!< DMAMUX1 TIM3 UP request */ +#define DMA_REQUEST_TIM3_TRIG 66U /*!< DMAMUX1 TIM3 TRIG request */ + +#define DMA_REQUEST_TIM4_CH1 67U /*!< DMAMUX1 TIM4 CH1 request */ +#define DMA_REQUEST_TIM4_CH2 68U /*!< DMAMUX1 TIM4 CH2 request */ +#define DMA_REQUEST_TIM4_CH3 69U /*!< DMAMUX1 TIM4 CH3 request */ +#define DMA_REQUEST_TIM4_CH4 70U /*!< DMAMUX1 TIM4 CH4 request */ +#define DMA_REQUEST_TIM4_UP 71U /*!< DMAMUX1 TIM4 UP request */ + +#define DMA_REQUEST_TIM5_CH1 72U /*!< DMAMUX1 TIM5 CH1 request */ +#define DMA_REQUEST_TIM5_CH2 73U /*!< DMAMUX1 TIM5 CH2 request */ +#define DMA_REQUEST_TIM5_CH3 74U /*!< DMAMUX1 TIM5 CH3 request */ +#define DMA_REQUEST_TIM5_CH4 75U /*!< DMAMUX1 TIM5 CH4 request */ +#define DMA_REQUEST_TIM5_UP 76U /*!< DMAMUX1 TIM5 UP request */ +#define DMA_REQUEST_TIM5_TRIG 77U /*!< DMAMUX1 TIM5 TRIG request */ + +#define DMA_REQUEST_TIM15_CH1 78U /*!< DMAMUX1 TIM15 CH1 request */ +#define DMA_REQUEST_TIM15_UP 79U /*!< DMAMUX1 TIM15 UP request */ +#define DMA_REQUEST_TIM15_TRIG 80U /*!< DMAMUX1 TIM15 TRIG request */ +#define DMA_REQUEST_TIM15_COM 81U /*!< DMAMUX1 TIM15 COM request */ + +#define DMA_REQUEST_TIM16_CH1 82U /*!< DMAMUX1 TIM16 CH1 request */ +#define DMA_REQUEST_TIM16_UP 83U /*!< DMAMUX1 TIM16 UP request */ +#define DMA_REQUEST_TIM17_CH1 84U /*!< DMAMUX1 TIM17 CH1 request */ +#define DMA_REQUEST_TIM17_UP 85U /*!< DMAMUX1 TIM17 UP request */ + +#define DMA_REQUEST_DFSDM1_FLT0 86U /*!< DMAMUX1 DFSDM1 Filter0 request */ +#define DMA_REQUEST_DFSDM1_FLT1 87U /*!< DMAMUX1 DFSDM1 Filter1 request */ +#define DMA_REQUEST_DFSDM1_FLT2 88U /*!< DMAMUX1 DFSDM1 Filter2 request */ +#define DMA_REQUEST_DFSDM1_FLT3 89U /*!< DMAMUX1 DFSDM1 Filter3 request */ + +#define DMA_REQUEST_DCMI 90U /*!< DMAMUX1 DCMI request */ + +#define DMA_REQUEST_AES_IN 91U /*!< DMAMUX1 AES IN request */ +#define DMA_REQUEST_AES_OUT 92U /*!< DMAMUX1 AES OUT request */ + +#define DMA_REQUEST_HASH_IN 93U /*!< DMAMUX1 HASH IN request */ +#endif /* STM32L4P5xx || STM32L4Q5xx */ + +#endif /* DMAMUX1 */ + +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE DMA_CCR_PINC /*!< Peripheral increment mode Enable */ +#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE DMA_CCR_MINC /*!< Memory increment mode Enable */ +#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @{ + */ +#define DMA_NORMAL 0x00000000U /*!< Normal mode */ +#define DMA_CIRCULAR DMA_CCR_CIRC /*!< Circular mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @{ + */ +#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ +#define DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ +#define DMA_PRIORITY_VERY_HIGH DMA_CCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @{ + */ +#define DMA_IT_TC DMA_CCR_TCIE +#define DMA_IT_HT DMA_CCR_HTIE +#define DMA_IT_TE DMA_CCR_TEIE +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @{ + */ +#define DMA_FLAG_GL1 DMA_ISR_GIF1 +#define DMA_FLAG_TC1 DMA_ISR_TCIF1 +#define DMA_FLAG_HT1 DMA_ISR_HTIF1 +#define DMA_FLAG_TE1 DMA_ISR_TEIF1 +#define DMA_FLAG_GL2 DMA_ISR_GIF2 +#define DMA_FLAG_TC2 DMA_ISR_TCIF2 +#define DMA_FLAG_HT2 DMA_ISR_HTIF2 +#define DMA_FLAG_TE2 DMA_ISR_TEIF2 +#define DMA_FLAG_GL3 DMA_ISR_GIF3 +#define DMA_FLAG_TC3 DMA_ISR_TCIF3 +#define DMA_FLAG_HT3 DMA_ISR_HTIF3 +#define DMA_FLAG_TE3 DMA_ISR_TEIF3 +#define DMA_FLAG_GL4 DMA_ISR_GIF4 +#define DMA_FLAG_TC4 DMA_ISR_TCIF4 +#define DMA_FLAG_HT4 DMA_ISR_HTIF4 +#define DMA_FLAG_TE4 DMA_ISR_TEIF4 +#define DMA_FLAG_GL5 DMA_ISR_GIF5 +#define DMA_FLAG_TC5 DMA_ISR_TCIF5 +#define DMA_FLAG_HT5 DMA_ISR_HTIF5 +#define DMA_FLAG_TE5 DMA_ISR_TEIF5 +#define DMA_FLAG_GL6 DMA_ISR_GIF6 +#define DMA_FLAG_TC6 DMA_ISR_TCIF6 +#define DMA_FLAG_HT6 DMA_ISR_HTIF6 +#define DMA_FLAG_TE6 DMA_ISR_TEIF6 +#define DMA_FLAG_GL7 DMA_ISR_GIF7 +#define DMA_FLAG_TC7 DMA_ISR_TCIF7 +#define DMA_FLAG_HT7 DMA_ISR_HTIF7 +#define DMA_FLAG_TE7 DMA_ISR_TEIF7 +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN) + + +/* Interrupt & Flag management */ + +/** + * @brief Return the current DMA Channel transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ + +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_FLAG_TC6 :\ + DMA_FLAG_TC7) + +/** + * @brief Return the current DMA Channel half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_FLAG_HT6 :\ + DMA_FLAG_HT7) + +/** + * @brief Return the current DMA Channel transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_FLAG_TE6 :\ + DMA_FLAG_TE7) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel5))? DMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_ISR_GIF6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel6))? DMA_ISR_GIF6 :\ + DMA_ISR_GIF7) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be from 1 to 7 to select the DMA Channel x flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ + (DMA2->ISR & (__FLAG__)) : (DMA1->ISR & (__FLAG__))) + +/** + * @brief Clear the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be from 1 to 7 to select the DMA Channel x flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (((uint32_t)((__HANDLE__)->Instance) > ((uint32_t)DMA1_Channel7))? \ + (DMA2->IFCR = (__FLAG__)) : (DMA1->IFCR = (__FLAG__))) + +/** + * @brief Enable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified DMA Channel interrupt is enabled or not. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) + +/** + * @brief Return the number of remaining data units in the current DMA Channel transfer. + * @param __HANDLE__ DMA handle + * @retval The number of remaining data units in the current DMA Channel transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) + +/** + * @} + */ + +#if defined(DMAMUX1) +/* Include DMA HAL Extension module */ +#include "stm32l4xx_hal_dma_ex.h" +#endif /* DMAMUX1 */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @{ + */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#if !defined (DMAMUX1) + +#define IS_DMA_ALL_REQUEST(REQUEST) (((REQUEST) == DMA_REQUEST_0) || \ + ((REQUEST) == DMA_REQUEST_1) || \ + ((REQUEST) == DMA_REQUEST_2) || \ + ((REQUEST) == DMA_REQUEST_3) || \ + ((REQUEST) == DMA_REQUEST_4) || \ + ((REQUEST) == DMA_REQUEST_5) || \ + ((REQUEST) == DMA_REQUEST_6) || \ + ((REQUEST) == DMA_REQUEST_7)) +#endif + +#if defined(DMAMUX1) + +#define IS_DMA_ALL_REQUEST(REQUEST)((REQUEST) <= DMA_REQUEST_HASH_IN) + +#endif /* DMAMUX1 */ + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_DMA_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h new file mode 100644 index 0000000..1b0d2d9 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_dma_ex.h @@ -0,0 +1,284 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_DMA_EX_H +#define STM32L4xx_HAL_DMA_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(DMAMUX1) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMAEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Types DMAEx Exported Types + * @{ + */ + +/** + * @brief HAL DMA Synchro definition + */ + + +/** + * @brief HAL DMAMUX Synchronization configuration structure definition + */ +typedef struct +{ + uint32_t SyncSignalID; /*!< Specifies the synchronization signal gating the DMA request in periodic mode. + This parameter can be a value of @ref DMAEx_DMAMUX_SyncSignalID_selection */ + + uint32_t SyncPolarity; /*!< Specifies the polarity of the signal on which the DMA request is synchronized. + This parameter can be a value of @ref DMAEx_DMAMUX_SyncPolarity_selection */ + + FunctionalState SyncEnable; /*!< Specifies if the synchronization shall be enabled or disabled + This parameter can take the value ENABLE or DISABLE*/ + + + FunctionalState EventEnable; /*!< Specifies if an event shall be generated once the RequestNumber is reached. + This parameter can take the value ENABLE or DISABLE */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be authorized after a sync event + This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ + + +} HAL_DMA_MuxSyncConfigTypeDef; + + +/** + * @brief HAL DMAMUX request generator parameters structure definition + */ +typedef struct +{ + uint32_t SignalID; /*!< Specifies the ID of the signal used for DMAMUX request generator + This parameter can be a value of @ref DMAEx_DMAMUX_SignalGeneratorID_selection */ + + uint32_t Polarity; /*!< Specifies the polarity of the signal on which the request is generated. + This parameter can be a value of @ref DMAEx_DMAMUX_RequestGeneneratorPolarity_selection */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be generated after a signal event + This parameter must be a number between Min_Data = 1 and Max_Data = 32 */ + +} HAL_DMA_MuxRequestGeneratorConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants + * @{ + */ + +/** @defgroup DMAEx_DMAMUX_SyncSignalID_selection DMAMUX SyncSignalID selection + * @{ + */ +#define HAL_DMAMUX1_SYNC_EXTI0 0U /*!< Synchronization Signal is EXTI0 IT */ +#define HAL_DMAMUX1_SYNC_EXTI1 1U /*!< Synchronization Signal is EXTI1 IT */ +#define HAL_DMAMUX1_SYNC_EXTI2 2U /*!< Synchronization Signal is EXTI2 IT */ +#define HAL_DMAMUX1_SYNC_EXTI3 3U /*!< Synchronization Signal is EXTI3 IT */ +#define HAL_DMAMUX1_SYNC_EXTI4 4U /*!< Synchronization Signal is EXTI4 IT */ +#define HAL_DMAMUX1_SYNC_EXTI5 5U /*!< Synchronization Signal is EXTI5 IT */ +#define HAL_DMAMUX1_SYNC_EXTI6 6U /*!< Synchronization Signal is EXTI6 IT */ +#define HAL_DMAMUX1_SYNC_EXTI7 7U /*!< Synchronization Signal is EXTI7 IT */ +#define HAL_DMAMUX1_SYNC_EXTI8 8U /*!< Synchronization Signal is EXTI8 IT */ +#define HAL_DMAMUX1_SYNC_EXTI9 9U /*!< Synchronization Signal is EXTI9 IT */ +#define HAL_DMAMUX1_SYNC_EXTI10 10U /*!< Synchronization Signal is EXTI10 IT */ +#define HAL_DMAMUX1_SYNC_EXTI11 11U /*!< Synchronization Signal is EXTI11 IT */ +#define HAL_DMAMUX1_SYNC_EXTI12 12U /*!< Synchronization Signal is EXTI12 IT */ +#define HAL_DMAMUX1_SYNC_EXTI13 13U /*!< Synchronization Signal is EXTI13 IT */ +#define HAL_DMAMUX1_SYNC_EXTI14 14U /*!< Synchronization Signal is EXTI14 IT */ +#define HAL_DMAMUX1_SYNC_EXTI15 15U /*!< Synchronization Signal is EXTI15 IT */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT 16U /*!< Synchronization Signal is DMAMUX1 Channel0 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT 17U /*!< Synchronization Signal is DMAMUX1 Channel1 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT 18U /*!< Synchronization Signal is DMAMUX1 Channel2 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH3_EVT 19U /*!< Synchronization Signal is DMAMUX1 Channel3 Event */ +#define HAL_DMAMUX1_SYNC_LPTIM1_OUT 20U /*!< Synchronization Signal is LPTIM1 OUT */ +#define HAL_DMAMUX1_SYNC_LPTIM2_OUT 21U /*!< Synchronization Signal is LPTIM2 OUT */ +#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define HAL_DMAMUX1_SYNC_DSI_TE 22U /*!< Synchronization Signal is DSI Tearing Effect */ +#define HAL_DMAMUX1_SYNC_DSI_EOT 23U /*!< Synchronization Signal is DSI End of refresh */ +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +#define HAL_DMAMUX1_SYNC_DMA2D_EOT 24U /*!< Synchronization Signal is DMA2D End of Transfer */ +#define HAL_DMAMUX1_SYNC_LDTC_IT 25U /*!< Synchronization Signal is LDTC IT */ + +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_SyncPolarity_selection DMAMUX SyncPolarity selection + * @{ + */ +#define HAL_DMAMUX_SYNC_NO_EVENT 0U /*!< block synchronization events */ +#define HAL_DMAMUX_SYNC_RISING DMAMUX_CxCR_SPOL_0 /*!< synchronize with rising edge events */ +#define HAL_DMAMUX_SYNC_FALLING DMAMUX_CxCR_SPOL_1 /*!< synchronize with falling edge events */ +#define HAL_DMAMUX_SYNC_RISING_FALLING DMAMUX_CxCR_SPOL /*!< synchronize with rising and falling edge events */ + +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_SignalGeneratorID_selection DMAMUX SignalGeneratorID selection + * @{ + */ + +#define HAL_DMAMUX1_REQ_GEN_EXTI0 0U /*!< Request generator Signal is EXTI0 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI1 1U /*!< Request generator Signal is EXTI1 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI2 2U /*!< Request generator Signal is EXTI2 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI3 3U /*!< Request generator Signal is EXTI3 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI4 4U /*!< Request generator Signal is EXTI4 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI5 5U /*!< Request generator Signal is EXTI5 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI6 6U /*!< Request generator Signal is EXTI6 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI7 7U /*!< Request generator Signal is EXTI7 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI8 8U /*!< Request generator Signal is EXTI8 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI9 9U /*!< Request generator Signal is EXTI9 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI10 10U /*!< Request generator Signal is EXTI10 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI11 11U /*!< Request generator Signal is EXTI11 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI12 12U /*!< Request generator Signal is EXTI12 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI13 13U /*!< Request generator Signal is EXTI13 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI14 14U /*!< Request generator Signal is EXTI14 IT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI15 15U /*!< Request generator Signal is EXTI15 IT */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT 16U /*!< Request generator Signal is DMAMUX1 Channel0 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT 17U /*!< Request generator Signal is DMAMUX1 Channel1 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT 18U /*!< Request generator Signal is DMAMUX1 Channel2 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT 19U /*!< Request generator Signal is DMAMUX1 Channel3 Event */ +#define HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT 20U /*!< Request generator Signal is LPTIM1 OUT */ +#define HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT 21U /*!< Request generator Signal is LPTIM2 OUT */ +#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define HAL_DMAMUX1_REQ_GEN_DSI_TE 22U /*!< Request generator Signal is DSI Tearing Effect */ +#define HAL_DMAMUX1_REQ_GEN_DSI_EOT 23U /*!< Request generator Signal is DSI End of refresh */ +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +#define HAL_DMAMUX1_REQ_GEN_DMA2D_EOT 24U /*!< Request generator Signal is DMA2D End of Transfer */ +#define HAL_DMAMUX1_REQ_GEN_LTDC_IT 25U /*!< Request generator Signal is LTDC IT */ + +/** + * @} + */ + +/** @defgroup DMAEx_DMAMUX_RequestGeneneratorPolarity_selection DMAMUX RequestGeneneratorPolarity selection + * @{ + */ +#define HAL_DMAMUX_REQ_GEN_NO_EVENT 0U /*!< block request generator events */ +#define HAL_DMAMUX_REQ_GEN_RISING DMAMUX_RGxCR_GPOL_0 /*!< generate request on rising edge events */ +#define HAL_DMAMUX_REQ_GEN_FALLING DMAMUX_RGxCR_GPOL_1 /*!< generate request on falling edge events */ +#define HAL_DMAMUX_REQ_GEN_RISING_FALLING DMAMUX_RGxCR_GPOL /*!< generate request on rising and falling edge events */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMAEx_Exported_Functions + * @{ + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup DMAEx_Exported_Functions_Group1 + * @{ + */ + +/* ------------------------- REQUEST -----------------------------------------*/ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, + HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig); +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma); +/* -------------------------------------------------------------------------- */ + +/* ------------------------- SYNCHRO -----------------------------------------*/ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig); +/* -------------------------------------------------------------------------- */ + +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/** + * @} + */ + + +/* Private defines -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Macros DMAEx Private Macros + * @brief DMAEx private macros + * @{ + */ + +#define IS_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_SYNC_LDTC_IT) + +#define IS_DMAMUX_SYNC_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_SYNC_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_SYNC_NO_EVENT) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING_FALLING)) + +#define IS_DMAMUX_SYNC_STATE(SYNC) (((SYNC) == DISABLE) || ((SYNC) == ENABLE)) + +#define IS_DMAMUX_SYNC_EVENT(EVENT) (((EVENT) == DISABLE) || \ + ((EVENT) == ENABLE)) + +#define IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_REQ_GEN_LTDC_IT) + +#define IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_REQUEST_GEN_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_REQ_GEN_NO_EVENT) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING_FALLING)) + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMAMUX1 */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_DMA_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h new file mode 100644 index 0000000..494e059 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_exti.h @@ -0,0 +1,858 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_exti.h + * @author MCD Application Team + * @brief Header file of EXTI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_EXTI_H +#define STM32L4xx_HAL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup EXTI EXTI + * @brief EXTI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Types EXTI Exported Types + * @{ + */ +typedef enum +{ + HAL_EXTI_COMMON_CB_ID = 0x00U, + HAL_EXTI_RISING_CB_ID = 0x01U, + HAL_EXTI_FALLING_CB_ID = 0x02U, +} EXTI_CallbackIDTypeDef; + + +/** + * @brief EXTI Handle structure definition + */ +typedef struct +{ + uint32_t Line; /*!< Exti line number */ + void (* PendingCallback)(void); /*!< Exti pending callback */ +} EXTI_HandleTypeDef; + +/** + * @brief EXTI Configuration structure definition + */ +typedef struct +{ + uint32_t Line; /*!< The Exti line to be configured. This parameter + can be a value of @ref EXTI_Line */ + uint32_t Mode; /*!< The Exit Mode to be configured for a core. + This parameter can be a combination of @ref EXTI_Mode */ + uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter + can be a value of @ref EXTI_Trigger */ + uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. + This parameter is only possible for line 0 to 15. It + can be a value of @ref EXTI_GPIOSel */ +} EXTI_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_Line EXTI Line + * @{ + */ +#if defined(STM32L412xx) || defined(STM32L422xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_RESERVED | EXTI_REG1 | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L412xx || STM32L422xx */ + +#if defined(STM32L431xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u) +#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L431xx */ + +#if defined(STM32L432xx) || defined(STM32L442xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_RESERVED | EXTI_REG1 | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_RESERVED | EXTI_REG1 | 0x1Cu) +#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L432xx || STM32L442xx */ + +#if defined(STM32L433xx) || defined(STM32L443xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L433xx || STM32L443xx */ + +#if defined(STM32L451xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) +#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u) +#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x08u) + +#endif /* STM32L451xx */ + +#if defined(STM32L452xx) || defined(STM32L462xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_RESERVED | EXTI_REG2 | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x08u) + +#endif /* STM32L452xx || STM32L462xx */ + +#if defined(STM32L471xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u) +#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L471xx */ + +#if defined(STM32L475xx) || defined(STM32L485xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L475xx || STM32L485xx */ + +#if defined(STM32L476xx) || defined(STM32L486xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_40 (EXTI_RESERVED | EXTI_REG2 | 0x08u) + +#endif /* STM32L476xx || STM32L486xx */ + +#if defined(STM32L496xx) || defined(STM32L4A6xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x08u) + +#endif /* STM32L496xx || STM32L4A6xx */ + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x02u) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x07u) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x08u) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x09u) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Au) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Bu) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Cu) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Du) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Eu) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_REG1 | EXTI_EVENT | 0x0Fu) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x10u) +#define EXTI_LINE_17 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x11u) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x12u) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x13u) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x14u) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x15u) +#define EXTI_LINE_22 (EXTI_CONFIG | EXTI_REG1 | EXTI_EVENT | 0x16u) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x17u) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x18u) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x19u) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Au) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Bu) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Cu) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Du) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Eu) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | EXTI_EVENT | 0x1Fu) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x00u) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x01u) +#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u) +#define EXTI_LINE_35 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x03u) +#define EXTI_LINE_36 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x04u) +#define EXTI_LINE_37 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x05u) +#define EXTI_LINE_38 (EXTI_CONFIG | EXTI_REG2 | EXTI_EVENT | 0x06u) +#define EXTI_LINE_39 (EXTI_RESERVED | EXTI_REG2 | 0x07u) +#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_REG2 | EXTI_EVENT | 0x08u) + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** + * @} + */ + +/** @defgroup EXTI_Mode EXTI Mode + * @{ + */ +#define EXTI_MODE_NONE 0x00000000u +#define EXTI_MODE_INTERRUPT 0x00000001u +#define EXTI_MODE_EVENT 0x00000002u +/** + * @} + */ + +/** @defgroup EXTI_Trigger EXTI Trigger + * @{ + */ +#define EXTI_TRIGGER_NONE 0x00000000u +#define EXTI_TRIGGER_RISING 0x00000001u +#define EXTI_TRIGGER_FALLING 0x00000002u +#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) +/** + * @} + */ + +/** @defgroup EXTI_GPIOSel EXTI GPIOSel + * @brief + * @{ + */ +#define EXTI_GPIOA 0x00000000u +#define EXTI_GPIOB 0x00000001u +#define EXTI_GPIOC 0x00000002u +#define EXTI_GPIOD 0x00000003u +#define EXTI_GPIOE 0x00000004u +#define EXTI_GPIOF 0x00000005u +#define EXTI_GPIOG 0x00000006u +#define EXTI_GPIOH 0x00000007u +#define EXTI_GPIOI 0x00000008u +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +/** + * @brief EXTI Line property definition + */ +#define EXTI_PROPERTY_SHIFT 24u +#define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT) +#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) +#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) +#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) +#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO) + +/** + * @brief EXTI Event presence definition + */ +#define EXTI_EVENT_PRESENCE_SHIFT 28u +#define EXTI_EVENT (0x01uL << EXTI_EVENT_PRESENCE_SHIFT) +#define EXTI_EVENT_PRESENCE_MASK (EXTI_EVENT) + +/** + * @brief EXTI Register and bit usage + */ +#define EXTI_REG_SHIFT 16u +#define EXTI_REG1 (0x00uL << EXTI_REG_SHIFT) +#define EXTI_REG2 (0x01uL << EXTI_REG_SHIFT) +#define EXTI_REG_MASK (EXTI_REG1 | EXTI_REG2) +#define EXTI_PIN_MASK 0x0000001Fu + +/** + * @brief EXTI Mask for interrupt & event mode + */ +#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) + +/** + * @brief EXTI Mask for trigger possibilities + */ +#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) + +/** + * @brief EXTI Line number + */ +#define EXTI_LINE_NB 41u + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Macros EXTI Private Macros + * @{ + */ +#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_EVENT_PRESENCE_MASK | EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00u) && \ + ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ + (((__EXTI_LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \ + (((EXTI_LINE_NB / 32u) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32u)))) + +#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \ + (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u)) + +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) + +#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING) + +#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) + +#if defined(STM32L412xx) || defined(STM32L422xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOH)) + +#endif /* STM32L412xx || STM32L422xx */ + +#if defined(STM32L431xx) || defined(STM32L433xx) || defined(STM32L443xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOH)) + +#endif /* STM32L431xx || STM32L433xx || STM32L443xx */ + +#if defined(STM32L432xx) || defined(STM32L442xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOH)) + +#endif /* STM32L432xx || STM32L442xx */ + +#if defined(STM32L451xx) || defined(STM32L452xx) || defined(STM32L462xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOH)) + +#endif /* STM32L451xx || STM32L452xx || STM32L462xx */ + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH)) + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + +#if defined(STM32L496xx) || defined(STM32L4A6xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH) || \ + ((__PORT__) == EXTI_GPIOI)) + +#endif /* STM32L496xx || STM32L4A6xx */ + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH) || \ + ((__PORT__) == EXTI_GPIOI)) + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Functions EXTI Exported Functions + * @brief EXTI Exported Functions + * @{ + */ + +/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions + * @brief Configuration functions + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_EXTI_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h new file mode 100644 index 0000000..73b0ce5 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash.h @@ -0,0 +1,1028 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_flash.h + * @author MCD Application Team + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_FLASH_H +#define STM32L4xx_HAL_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< Mass erase or page erase. + This parameter can be a value of @ref FLASH_Type_Erase */ + uint32_t Banks; /*!< Select bank to erase. + This parameter must be a value of @ref FLASH_Banks + (FLASH_BANK_BOTH should be used only for mass erase) */ + uint32_t Page; /*!< Initial Flash page to erase when page erase is disabled + This parameter must be a value between 0 and (max number of pages in the bank - 1) + (eg : 255 for 1MB dual bank) */ + uint32_t NbPages; /*!< Number of pages to be erased. + This parameter must be a value between 1 and (max number of pages in the bank - value of initial page)*/ +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH Option Bytes Program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< Option byte to be configured. + This parameter can be a combination of the values of @ref FLASH_OB_Type */ + uint32_t WRPArea; /*!< Write protection area to be programmed (used for OPTIONBYTE_WRP). + Only one WRP area could be programmed at the same time. + This parameter can be value of @ref FLASH_OB_WRP_Area */ + uint32_t WRPStartOffset; /*!< Write protection start offset (used for OPTIONBYTE_WRP). + This parameter must be a value between 0 and (max number of pages in the bank - 1) + (eg : 25 for 1MB dual bank) */ + uint32_t WRPEndOffset; /*!< Write protection end offset (used for OPTIONBYTE_WRP). + This parameter must be a value between WRPStartOffset and (max number of pages in the bank - 1) */ + uint32_t RDPLevel; /*!< Set the read protection level.. (used for OPTIONBYTE_RDP). + This parameter can be a value of @ref FLASH_OB_Read_Protection */ + uint32_t USERType; /*!< User option byte(s) to be configured (used for OPTIONBYTE_USER). + This parameter can be a combination of @ref FLASH_OB_USER_Type */ + uint32_t USERConfig; /*!< Value of the user option byte (used for OPTIONBYTE_USER). + This parameter can be a combination of @ref FLASH_OB_USER_BOR_LEVEL, + @ref FLASH_OB_USER_nRST_STOP, @ref FLASH_OB_USER_nRST_STANDBY, + @ref FLASH_OB_USER_nRST_SHUTDOWN, @ref FLASH_OB_USER_IWDG_SW, + @ref FLASH_OB_USER_IWDG_STOP, @ref FLASH_OB_USER_IWDG_STANDBY, + @ref FLASH_OB_USER_WWDG_SW, @ref FLASH_OB_USER_BFB2, + @ref FLASH_OB_USER_DUALBANK, @ref FLASH_OB_USER_nBOOT1, + @ref FLASH_OB_USER_SRAM2_PE, @ref FLASH_OB_USER_SRAM2_RST, + @ref FLASH_OB_USER_nSWBOOT0 and @ref FLASH_OB_USER_nBOOT0 */ + uint32_t PCROPConfig; /*!< Configuration of the PCROP (used for OPTIONBYTE_PCROP). + This parameter must be a combination of @ref FLASH_Banks (except FLASH_BANK_BOTH) + and @ref FLASH_OB_PCROP_RDP */ + uint32_t PCROPStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). + This parameter must be a value between begin and end of bank + => Be careful of the bank swapping for the address */ + uint32_t PCROPEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). + This parameter must be a value between PCROP Start address and end of bank */ +} FLASH_OBProgramInitTypeDef; + +/** + * @brief FLASH Procedure structure definition + */ +typedef enum +{ + FLASH_PROC_NONE = 0, + FLASH_PROC_PAGE_ERASE, + FLASH_PROC_MASS_ERASE, + FLASH_PROC_PROGRAM, + FLASH_PROC_PROGRAM_LAST +} FLASH_ProcedureTypeDef; + +/** + * @brief FLASH Cache structure definition + */ +typedef enum +{ + FLASH_CACHE_DISABLED = 0, + FLASH_CACHE_ICACHE_ENABLED, + FLASH_CACHE_DCACHE_ENABLED, + FLASH_CACHE_ICACHE_DCACHE_ENABLED +} FLASH_CacheTypeDef; + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + HAL_LockTypeDef Lock; /* FLASH locking object */ + __IO uint32_t ErrorCode; /* FLASH error code */ + __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */ + __IO uint32_t Address; /* Internal variable to save address selected for program in IT context */ + __IO uint32_t Bank; /* Internal variable to save current bank selected during erase in IT context */ + __IO uint32_t Page; /* Internal variable to define the current page which is erasing in IT context */ + __IO uint32_t NbPagesToErase; /* Internal variable to save the remaining pages to erase in IT context */ + __IO FLASH_CacheTypeDef CacheToReactivate; /* Internal variable to indicate which caches should be reactivated */ +}FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASH_Error FLASH Error + * @{ + */ +#define HAL_FLASH_ERROR_NONE 0x00000000U +#define HAL_FLASH_ERROR_OP FLASH_FLAG_OPERR +#define HAL_FLASH_ERROR_PROG FLASH_FLAG_PROGERR +#define HAL_FLASH_ERROR_WRP FLASH_FLAG_WRPERR +#define HAL_FLASH_ERROR_PGA FLASH_FLAG_PGAERR +#define HAL_FLASH_ERROR_SIZ FLASH_FLAG_SIZERR +#define HAL_FLASH_ERROR_PGS FLASH_FLAG_PGSERR +#define HAL_FLASH_ERROR_MIS FLASH_FLAG_MISERR +#define HAL_FLASH_ERROR_FAST FLASH_FLAG_FASTERR +#define HAL_FLASH_ERROR_RD FLASH_FLAG_RDERR +#define HAL_FLASH_ERROR_OPTV FLASH_FLAG_OPTVERR +#define HAL_FLASH_ERROR_ECCC FLASH_FLAG_ECCC +#define HAL_FLASH_ERROR_ECCD FLASH_FLAG_ECCD +#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || \ + defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || \ + defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define HAL_FLASH_ERROR_PEMPTY FLASH_FLAG_PEMPTY +#endif +/** + * @} + */ + +/** @defgroup FLASH_Type_Erase FLASH Erase Type + * @{ + */ +#define FLASH_TYPEERASE_PAGES ((uint32_t)0x00) /*!> 24) /*!< ECC Correction Interrupt source */ +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Macros FLASH Exported Macros + * @brief macros to control FLASH features + * @{ + */ + +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__ FLASH Latency + * This parameter can be one of the following values : + * @arg FLASH_LATENCY_0: FLASH Zero wait state + * @arg FLASH_LATENCY_1: FLASH One wait state + * @arg FLASH_LATENCY_2: FLASH Two wait states + * @arg FLASH_LATENCY_3: FLASH Three wait states + * @arg FLASH_LATENCY_4: FLASH Four wait states + * @retval None + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (__LATENCY__))) + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * This parameter can be one of the following values : + * @arg FLASH_LATENCY_0: FLASH Zero wait state + * @arg FLASH_LATENCY_1: FLASH One wait state + * @arg FLASH_LATENCY_2: FLASH Two wait states + * @arg FLASH_LATENCY_3: FLASH Three wait states + * @arg FLASH_LATENCY_4: FLASH Four wait states + */ +#define __HAL_FLASH_GET_LATENCY() READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY) + +/** + * @brief Enable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) + +/** + * @brief Disable the FLASH prefetch buffer. + * @retval None + */ +#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) + +/** + * @brief Enable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ICEN) + +/** + * @brief Disable the FLASH instruction cache. + * @retval none + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN) + +/** + * @brief Enable the FLASH data cache. + * @retval none + */ +#define __HAL_FLASH_DATA_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_DCEN) + +/** + * @brief Disable the FLASH data cache. + * @retval none + */ +#define __HAL_FLASH_DATA_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN) + +/** + * @brief Reset the FLASH instruction Cache. + * @note This function must be used only when the Instruction Cache is disabled. + * @retval None + */ +#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); \ + } while (0) + +/** + * @brief Reset the FLASH data Cache. + * @note This function must be used only when the data Cache is disabled. + * @retval None + */ +#define __HAL_FLASH_DATA_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_DCRST); \ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST); \ + } while (0) + +/** + * @brief Enable the FLASH power down during Low-power run mode. + * @note Writing this bit to 0 this bit, automatically the keys are + * loss and a new unlock sequence is necessary to re-write it to 1. + */ +#define __HAL_FLASH_POWER_DOWN_ENABLE() do { WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); \ + WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); \ + SET_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); \ + } while (0) + +/** + * @brief Disable the FLASH power down during Low-power run mode. + * @note Writing this bit to 0 this bit, automatically the keys are + * loss and a new unlock sequence is necessary to re-write it to 1. + */ +#define __HAL_FLASH_POWER_DOWN_DISABLE() do { WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); \ + WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); \ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); \ + } while (0) + +/** + * @brief Enable the FLASH power down during Low-Power sleep mode + * @retval none + */ +#define __HAL_FLASH_SLEEP_POWERDOWN_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD) + +/** + * @brief Disable the FLASH power down during Low-Power sleep mode + * @retval none + */ +#define __HAL_FLASH_SLEEP_POWERDOWN_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD) + +/** + * @} + */ + +/** @defgroup FLASH_Interrupt FLASH Interrupts Macros + * @brief macros to handle FLASH interrupts + * @{ + */ + +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt + * @arg FLASH_IT_OPERR: Error Interrupt + * @arg FLASH_IT_RDERR: PCROP Read Error Interrupt + * @arg FLASH_IT_ECCC: ECC Correction Interrupt + * @retval none + */ +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & FLASH_IT_ECCC) != 0U) { SET_BIT(FLASH->ECCR, FLASH_ECCR_ECCIE); }\ + if(((__INTERRUPT__) & (~FLASH_IT_ECCC)) != 0U) { SET_BIT(FLASH->CR, ((__INTERRUPT__) & (~FLASH_IT_ECCC))); }\ + } while(0) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt + * @arg FLASH_IT_OPERR: Error Interrupt + * @arg FLASH_IT_RDERR: PCROP Read Error Interrupt + * @arg FLASH_IT_ECCC: ECC Correction Interrupt + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & FLASH_IT_ECCC) != 0U) { CLEAR_BIT(FLASH->ECCR, FLASH_ECCR_ECCIE); }\ + if(((__INTERRUPT__) & (~FLASH_IT_ECCC)) != 0U) { CLEAR_BIT(FLASH->CR, ((__INTERRUPT__) & (~FLASH_IT_ECCC))); }\ + } while(0) + +/** + * @brief Check whether the specified FLASH flag is set or not. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @arg FLASH_FLAG_OPERR: FLASH Operation error flag + * @arg FLASH_FLAG_PROGERR: FLASH Programming error flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protection error flag + * @arg FLASH_FLAG_PGAERR: FLASH Programming alignment error flag + * @arg FLASH_FLAG_SIZERR: FLASH Size error flag + * @arg FLASH_FLAG_PGSERR: FLASH Programming sequence error flag + * @arg FLASH_FLAG_MISERR: FLASH Fast programming data miss error flag + * @arg FLASH_FLAG_FASTERR: FLASH Fast programming error flag + * @arg FLASH_FLAG_RDERR: FLASH PCROP read error flag + * @arg FLASH_FLAG_OPTVERR: FLASH Option validity error flag + * @arg FLASH_FLAG_BSY: FLASH write/erase operations in progress flag + * @arg FLASH_FLAG_PEMPTY : FLASH Boot from not programmed flash (apply only for STM32L43x/STM32L44x devices) + * @arg FLASH_FLAG_ECCC: FLASH one ECC error has been detected and corrected + * @arg FLASH_FLAG_ECCD: FLASH two ECC errors have been detected + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & FLASH_FLAG_ECCR_ERRORS) != 0U) ? \ + (READ_BIT(FLASH->ECCR, (__FLAG__)) != 0U) : \ + (READ_BIT(FLASH->SR, (__FLAG__)) != 0U)) + +/** + * @brief Clear the FLASH's pending flags. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @arg FLASH_FLAG_OPERR: FLASH Operation error flag + * @arg FLASH_FLAG_PROGERR: FLASH Programming error flag + * @arg FLASH_FLAG_WRPERR: FLASH Write protection error flag + * @arg FLASH_FLAG_PGAERR: FLASH Programming alignment error flag + * @arg FLASH_FLAG_SIZERR: FLASH Size error flag + * @arg FLASH_FLAG_PGSERR: FLASH Programming sequence error flag + * @arg FLASH_FLAG_MISERR: FLASH Fast programming data miss error flag + * @arg FLASH_FLAG_FASTERR: FLASH Fast programming error flag + * @arg FLASH_FLAG_RDERR: FLASH PCROP read error flag + * @arg FLASH_FLAG_OPTVERR: FLASH Option validity error flag + * @arg FLASH_FLAG_ECCC: FLASH one ECC error has been detected and corrected + * @arg FLASH_FLAG_ECCD: FLASH two ECC errors have been detected + * @arg FLASH_FLAG_ALL_ERRORS: FLASH All errors flags + * @retval None + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & FLASH_FLAG_ECCR_ERRORS) != 0U) { SET_BIT(FLASH->ECCR, ((__FLAG__) & FLASH_FLAG_ECCR_ERRORS)); }\ + if(((__FLAG__) & ~(FLASH_FLAG_ECCR_ERRORS)) != 0U) { WRITE_REG(FLASH->SR, ((__FLAG__) & ~(FLASH_FLAG_ECCR_ERRORS))); }\ + } while(0) +/** + * @} + */ + +/* Include FLASH HAL Extended module */ +#include "stm32l4xx_hal_flash_ex.h" +#include "stm32l4xx_hal_flash_ramfunc.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ + +/* Program operation functions ***********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); +/* FLASH IRQ handler method */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +/* Option bytes control */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +uint32_t HAL_FLASH_GetError(void); +/** + * @} + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ + defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define FLASH_BANK_SIZE (FLASH_SIZE >> 1U) +#else +#define FLASH_BANK_SIZE (FLASH_SIZE) +#endif + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define FLASH_PAGE_SIZE ((uint32_t)0x1000) +#define FLASH_PAGE_SIZE_128_BITS ((uint32_t)0x2000) +#else +#define FLASH_PAGE_SIZE ((uint32_t)0x800) +#endif + +#define FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ + +#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || \ + ((VALUE) == FLASH_TYPEERASE_MASSERASE)) + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ + defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \ + ((BANK) == FLASH_BANK_2) || \ + ((BANK) == FLASH_BANK_BOTH)) + +#define IS_FLASH_BANK_EXCLUSIVE(BANK) (((BANK) == FLASH_BANK_1) || \ + ((BANK) == FLASH_BANK_2)) +#else +#define IS_FLASH_BANK(BANK) ((BANK) == FLASH_BANK_1) + +#define IS_FLASH_BANK_EXCLUSIVE(BANK) ((BANK) == FLASH_BANK_1) +#endif + +#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_FAST) || \ + ((VALUE) == FLASH_TYPEPROGRAM_FAST_AND_LAST)) + +#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS) (((ADDRESS) >= (FLASH_BASE)) && ((ADDRESS) <= (FLASH_BASE+0x1FFFFFU))) +#else +#define IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS) (((ADDRESS) >= (FLASH_BASE)) && ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x400U) ? \ + ((ADDRESS) <= (FLASH_BASE+0xFFFFFU)) : ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x200U) ? \ + ((ADDRESS) <= (FLASH_BASE+0x7FFFFU)) : ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x100U) ? \ + ((ADDRESS) <= (FLASH_BASE+0x3FFFFU)) : ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x80U) ? \ + ((ADDRESS) <= (FLASH_BASE+0x1FFFFU)) : ((ADDRESS) <= (FLASH_BASE+0xFFFFFU))))))) +#endif + +#define IS_FLASH_OTP_ADDRESS(ADDRESS) (((ADDRESS) >= 0x1FFF7000U) && ((ADDRESS) <= 0x1FFF73FFU)) + +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) ((IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS)) || (IS_FLASH_OTP_ADDRESS(ADDRESS))) + +#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_FLASH_PAGE(PAGE) ((PAGE) < 256U) +#elif defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) +#define IS_FLASH_PAGE(PAGE) (((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x400U) ? ((PAGE) < 256U) : \ + ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x200U) ? ((PAGE) < 128U) : \ + ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x100U) ? ((PAGE) < 64U) : \ + ((PAGE) < 256U))))) +#elif defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) +#define IS_FLASH_PAGE(PAGE) (((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x200U) ? ((PAGE) < 256U) : \ + ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x100U) ? ((PAGE) < 128U) : \ + ((PAGE) < 256U)))) +#else +#define IS_FLASH_PAGE(PAGE) (((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x100U) ? ((PAGE) < 128U) : \ + ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFFU)) == 0x80U) ? ((PAGE) < 64U) : \ + ((PAGE) < 128U)))) +#endif + +#define IS_OPTIONBYTE(VALUE) (((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_PCROP))) + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ + defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_OB_WRPAREA(VALUE) (((VALUE) == OB_WRPAREA_BANK1_AREAA) || ((VALUE) == OB_WRPAREA_BANK1_AREAB) || \ + ((VALUE) == OB_WRPAREA_BANK2_AREAA) || ((VALUE) == OB_WRPAREA_BANK2_AREAB)) +#else +#define IS_OB_WRPAREA(VALUE) (((VALUE) == OB_WRPAREA_BANK1_AREAA) || ((VALUE) == OB_WRPAREA_BANK1_AREAB)) +#endif + +#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\ + ((LEVEL) == OB_RDP_LEVEL_1)/* ||\ + ((LEVEL) == OB_RDP_LEVEL_2)*/) + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_OB_USER_TYPE(TYPE) (((TYPE) <= (uint32_t)0xFFFFU) && ((TYPE) != 0U)) +#elif defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) +#define IS_OB_USER_TYPE(TYPE) (((TYPE) <= (uint32_t)0x1FFFU) && ((TYPE) != 0U)) +#else +#define IS_OB_USER_TYPE(TYPE) (((TYPE) <= (uint32_t)0x7E7FU) && ((TYPE) != 0U) && (((TYPE)&0x0180U) == 0U)) +#endif + +#define IS_OB_USER_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL_0) || ((LEVEL) == OB_BOR_LEVEL_1) || \ + ((LEVEL) == OB_BOR_LEVEL_2) || ((LEVEL) == OB_BOR_LEVEL_3) || \ + ((LEVEL) == OB_BOR_LEVEL_4)) + +#define IS_OB_USER_STOP(VALUE) (((VALUE) == OB_STOP_RST) || ((VALUE) == OB_STOP_NORST)) + +#define IS_OB_USER_STANDBY(VALUE) (((VALUE) == OB_STANDBY_RST) || ((VALUE) == OB_STANDBY_NORST)) + +#define IS_OB_USER_SHUTDOWN(VALUE) (((VALUE) == OB_SHUTDOWN_RST) || ((VALUE) == OB_SHUTDOWN_NORST)) + +#define IS_OB_USER_IWDG(VALUE) (((VALUE) == OB_IWDG_HW) || ((VALUE) == OB_IWDG_SW)) + +#define IS_OB_USER_IWDG_STOP(VALUE) (((VALUE) == OB_IWDG_STOP_FREEZE) || ((VALUE) == OB_IWDG_STOP_RUN)) + +#define IS_OB_USER_IWDG_STDBY(VALUE) (((VALUE) == OB_IWDG_STDBY_FREEZE) || ((VALUE) == OB_IWDG_STDBY_RUN)) + +#define IS_OB_USER_WWDG(VALUE) (((VALUE) == OB_WWDG_HW) || ((VALUE) == OB_WWDG_SW)) + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ + defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_OB_USER_BFB2(VALUE) (((VALUE) == OB_BFB2_DISABLE) || ((VALUE) == OB_BFB2_ENABLE)) + +#define IS_OB_USER_DUALBANK(VALUE) (((VALUE) == OB_DUALBANK_SINGLE) || ((VALUE) == OB_DUALBANK_DUAL)) +#endif + +#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_OB_USER_DBANK(VALUE) (((VALUE) == OB_DBANK_128_BITS) || ((VALUE) == OB_DBANK_64_BITS)) +#endif + +#define IS_OB_USER_BOOT1(VALUE) (((VALUE) == OB_BOOT1_SRAM) || ((VALUE) == OB_BOOT1_SYSTEM)) + +#define IS_OB_USER_SRAM2_PARITY(VALUE) (((VALUE) == OB_SRAM2_PARITY_ENABLE) || ((VALUE) == OB_SRAM2_PARITY_DISABLE)) + +#define IS_OB_USER_SRAM2_RST(VALUE) (((VALUE) == OB_SRAM2_RST_ERASE) || ((VALUE) == OB_SRAM2_RST_NOT_ERASE)) + +#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || \ + defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || \ + defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_OB_USER_SWBOOT0(VALUE) (((VALUE) == OB_BOOT0_FROM_OB) || ((VALUE) == OB_BOOT0_FROM_PIN)) + +#define IS_OB_USER_BOOT0(VALUE) (((VALUE) == OB_BOOT0_RESET) || ((VALUE) == OB_BOOT0_SET)) +#endif + +#define IS_OB_PCROP_RDP(VALUE) (((VALUE) == OB_PCROP_RDP_NOT_ERASE) || ((VALUE) == OB_PCROP_RDP_ERASE)) + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || ((LATENCY) == FLASH_LATENCY_1) || \ + ((LATENCY) == FLASH_LATENCY_2) || ((LATENCY) == FLASH_LATENCY_3) || \ + ((LATENCY) == FLASH_LATENCY_4) || ((LATENCY) == FLASH_LATENCY_5) || \ + ((LATENCY) == FLASH_LATENCY_6) || ((LATENCY) == FLASH_LATENCY_7) || \ + ((LATENCY) == FLASH_LATENCY_8) || ((LATENCY) == FLASH_LATENCY_9) || \ + ((LATENCY) == FLASH_LATENCY_10) || ((LATENCY) == FLASH_LATENCY_11) || \ + ((LATENCY) == FLASH_LATENCY_12) || ((LATENCY) == FLASH_LATENCY_13) || \ + ((LATENCY) == FLASH_LATENCY_14) || ((LATENCY) == FLASH_LATENCY_15)) +#else +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \ + ((LATENCY) == FLASH_LATENCY_1) || \ + ((LATENCY) == FLASH_LATENCY_2) || \ + ((LATENCY) == FLASH_LATENCY_3) || \ + ((LATENCY) == FLASH_LATENCY_4)) +#endif +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_FLASH_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h new file mode 100644 index 0000000..36ec888 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ex.h @@ -0,0 +1,125 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of FLASH HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_FLASH_EX_H +#define STM32L4xx_HAL_FLASH_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +#if defined (FLASH_CFGR_LVEN) +/** @addtogroup FLASHEx_Exported_Constants + * @{ + */ +/** @defgroup FLASHEx_LVE_PIN_CFG FLASHEx LVE pin configuration + * @{ + */ +#define FLASH_LVE_PIN_CTRL 0x00000000U /*!< LVE FLASH pin controlled by power controller */ +#define FLASH_LVE_PIN_FORCED FLASH_CFGR_LVEN /*!< LVE FLASH pin enforced to low (external SMPS used) */ +/** + * @} + */ + +/** + * @} + */ +#endif /* FLASH_CFGR_LVEN */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASHEx_Exported_Functions + * @{ + */ + +/* Extended Program operation functions *************************************/ +/** @addtogroup FLASHEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError); +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); +/** + * @} + */ + +#if defined (FLASH_CFGR_LVEN) +/** @addtogroup FLASHEx_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_FLASHEx_ConfigLVEPin(uint32_t ConfigLVE); +/** + * @} + */ +#endif /* FLASH_CFGR_LVEN */ + +/** + * @} + */ + +/* Private function ----------------------------------------------------------*/ +/** @addtogroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +void FLASH_PageErase(uint32_t Page, uint32_t Banks); +void FLASH_FlushCaches(void); +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** + @cond 0 + */ +#if defined (FLASH_CFGR_LVEN) +#define IS_FLASH_LVE_PIN(CFG) (((CFG) == FLASH_LVE_PIN_CTRL) || ((CFG) == FLASH_LVE_PIN_FORCED)) +#endif /* FLASH_CFGR_LVEN */ +/** + @endcond + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_FLASH_EX_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h new file mode 100644 index 0000000..b5852fc --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_flash_ramfunc.h @@ -0,0 +1,74 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_flash_ramfunc.h + * @author MCD Application Team + * @brief Header file of FLASH RAMFUNC driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_FLASH_RAMFUNC_H +#define STM32L4xx_FLASH_RAMFUNC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH_RAMFUNC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_RAMFUNC_Exported_Functions + * @{ + */ + +/** @addtogroup FLASH_RAMFUNC_Exported_Functions_Group1 + * @{ + */ +/* Peripheral Control functions ************************************************/ +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableRunPowerDown(void); +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableRunPowerDown(void); +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_OB_DBankConfig(uint32_t DBankConfig); +#endif +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_FLASH_RAMFUNC_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h new file mode 100644 index 0000000..aaa7b6d --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio.h @@ -0,0 +1,323 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_GPIO_H +#define STM32L4xx_HAL_GPIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins + This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ +} GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0U, + GPIO_PIN_SET +} GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ +/** @defgroup GPIO_pins GPIO pins + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ + +#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode GPIO mode + * @brief GPIO Configuration Mode + * Elements values convention: 0x00WX00YZ + * - W : EXTI trigger detection on 3 bits + * - X : EXTI mode (IT or Event) on 2 bits + * - Y : Output type (Push Pull or Open Drain) on 1 bit + * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits + * @{ + */ +#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ +#define GPIO_MODE_ANALOG_ADC_CONTROL (MODE_ANALOG | 0x8uL) /*!< Analog Mode for ADC conversion (0x0000000Bu)*/ +#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup GPIO_speed GPIO speed + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW 0x00000000u /*!< Low speed */ +#define GPIO_SPEED_FREQ_MEDIUM 0x00000001u /*!< Medium speed */ +#define GPIO_SPEED_FREQ_HIGH 0x00000002u /*!< High speed */ +#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003u /*!< Very high speed */ +/** + * @} + */ + +/** @defgroup GPIO_pull GPIO pull + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL 0x00000000u /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP 0x00000001u /*!< Pull-up activation */ +#define GPIO_PULLDOWN 0x00000002u /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Check whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__ specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending flags. + * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__)) + +/** + * @brief Check whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__)) + +/** + * @brief Clear the EXTI's line pending bits. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__)) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__)) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ +#define GPIO_MODE_Pos 0u +#define GPIO_MODE (0x3uL << GPIO_MODE_Pos) +#define MODE_INPUT (0x0uL << GPIO_MODE_Pos) +#define MODE_OUTPUT (0x1uL << GPIO_MODE_Pos) +#define MODE_AF (0x2uL << GPIO_MODE_Pos) +#define MODE_ANALOG (0x3uL << GPIO_MODE_Pos) +#define OUTPUT_TYPE_Pos 4u +#define OUTPUT_TYPE (0x1uL << OUTPUT_TYPE_Pos) +#define OUTPUT_PP (0x0uL << OUTPUT_TYPE_Pos) +#define OUTPUT_OD (0x1uL << OUTPUT_TYPE_Pos) +#define EXTI_MODE_Pos 16u +#define EXTI_MODE (0x3uL << EXTI_MODE_Pos) +#define EXTI_IT (0x1uL << EXTI_MODE_Pos) +#define EXTI_EVT (0x2uL << EXTI_MODE_Pos) +#define TRIGGER_MODE_Pos 20u +#define TRIGGER_MODE (0x7uL << TRIGGER_MODE_Pos) +#define TRIGGER_RISING (0x1uL << TRIGGER_MODE_Pos) +#define TRIGGER_FALLING (0x2uL << TRIGGER_MODE_Pos) + +/** + * @} + */ + +/** @addtogroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) + +#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\ + (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00U)) + +#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ + ((__MODE__) == GPIO_MODE_AF_PP) ||\ + ((__MODE__) == GPIO_MODE_AF_OD) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING) ||\ + ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ + ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_ANALOG) ||\ + ((__MODE__) == GPIO_MODE_ANALOG_ADC_CONTROL)) + +#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_HIGH) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ + ((__PULL__) == GPIO_PULLUP) || \ + ((__PULL__) == GPIO_PULLDOWN)) +/** + * @} + */ + +/* Include GPIO HAL Extended module */ +#include "stm32l4xx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); + +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_GPIO_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h new file mode 100644 index 0000000..0a28d8a --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_gpio_ex.h @@ -0,0 +1,1060 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_GPIO_EX_H +#define STM32L4xx_HAL_GPIO_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @brief GPIO Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants + * @{ + */ + +/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection + * @{ + */ + +#if defined(STM32L412xx) || defined(STM32L422xx) +/*--------------STM32L412xx/STM32L422xx---*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART1 Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_COMP1 ((uint8_t)0x06) /* COMP1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_USB_FS ((uint8_t)0x0A) /* USB_FS Alternate Function mapping */ +#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ + + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L412xx || STM32L422xx */ + +#if defined(STM32L431xx) || defined(STM32L432xx) || defined(STM32L433xx) || defined(STM32L442xx) || defined(STM32L443xx) +/*--------------STM32L431xx/STM32L432xx/STM32L433xx/STM32L442xx/STM32L443xx---*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#if defined(STM32L433xx) || defined(STM32L443xx) +#define GPIO_AF0_LCDBIAS ((uint8_t)0x00) /* LCDBIAS Alternate Function mapping */ +#endif /* STM32L433xx || STM32L443xx */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART1 Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ +#define GPIO_AF6_COMP1 ((uint8_t)0x06) /* COMP1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#if defined(STM32L432xx) || defined(STM32L433xx) || defined(STM32L442xx) || defined(STM32L443xx) +#define GPIO_AF10_USB_FS ((uint8_t)0x0A) /* USB_FS Alternate Function mapping */ +#endif /* STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */ +#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ + +#if defined(STM32L433xx) || defined(STM32L443xx) +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_LCD ((uint8_t)0x0B) /* LCD Alternate Function mapping */ +#endif /* STM32L433xx || STM32L443xx */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_SWPMI1 ((uint8_t)0x0C) /* SWPMI1 Alternate Function mapping */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */ + +#if defined(STM32L451xx) || defined(STM32L452xx) || defined(STM32L462xx) +/*--------------STM32L451xx/STM32L452xx/STM32L462xx---------------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_I2C4 ((uint8_t)0x02) /* I2C4 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART2 Alternate Function mapping */ +#define GPIO_AF3_CAN1 ((uint8_t)0x03) /* CAN1 Alternate Function mapping */ +#define GPIO_AF3_I2C4 ((uint8_t)0x03) /* I2C4 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ +#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ +#define GPIO_AF5_I2C4 ((uint8_t)0x05) /* I2C4 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF6_COMP1 ((uint8_t)0x06) /* COMP1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ +#define GPIO_AF8_CAN1 ((uint8_t)0x08) /* CAN1 Alternate Function mapping */ + + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#if defined(STM32L452xx) || defined(STM32L462xx) +#define GPIO_AF10_USB_FS ((uint8_t)0x0A) /* USB_FS Alternate Function mapping */ +#endif /* STM32L452xx || STM32L462xx */ +#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ +#define GPIO_AF10_CAN1 ((uint8_t)0x0A) /* CAN1 Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L451xx || STM32L452xx || STM32L462xx */ + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) +/*--------------STM32L471xx/STM32L475xx/STM32L476xx/STM32L485xx/STM32L486xx---*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#if defined(STM32L476xx) || defined(STM32L486xx) +#define GPIO_AF0_LCDBIAS ((uint8_t)0x00) /* LCDBIAS Alternate Function mapping */ +#endif /* STM32L476xx || STM32L486xx */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_TIM5 ((uint8_t)0x01) /* TIM5 Alternate Function mapping */ +#define GPIO_AF1_TIM8 ((uint8_t)0x01) /* TIM8 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ + + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#if defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ +#endif /* STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ +#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ + +#if defined(STM32L476xx) || defined(STM32L486xx) +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_LCD ((uint8_t)0x0B) /* LCD Alternate Function mapping */ +#endif /* STM32L476xx || STM32L486xx */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_SWPMI1 ((uint8_t)0x0C) /* SWPMI1 Alternate Function mapping */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ +#define GPIO_AF13_SAI2 ((uint8_t)0x0D) /* SAI2 Alternate Function mapping */ +#define GPIO_AF13_TIM8_COMP2 ((uint8_t)0x0D) /* TIM8/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF13_TIM8_COMP1 ((uint8_t)0x0D) /* TIM8/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM8_COMP1 ((uint8_t)0x0E) /* TIM8/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + +#if defined(STM32L496xx) || defined(STM32L4A6xx) +/*--------------------------------STM32L496xx/STM32L4A6xx---------------------*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_TIM5 ((uint8_t)0x01) /* TIM5 Alternate Function mapping */ +#define GPIO_AF1_TIM8 ((uint8_t)0x01) /* TIM8 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ +#define GPIO_AF2_I2C4 ((uint8_t)0x02) /* I2C4 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF3_CAN2 ((uint8_t)0x03) /* CAN2 Alternate Function mapping */ +#define GPIO_AF3_I2C4 ((uint8_t)0x03) /* I2C4 Alternate Function mapping */ +#define GPIO_AF3_QUADSPI ((uint8_t)0x03) /* QUADSPI Alternate Function mapping */ +#define GPIO_AF3_SPI2 ((uint8_t)0x03) /* SPI2 Alternate Function mapping */ +#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ +#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ +#define GPIO_AF4_DCMI ((uint8_t)0x04) /* DCMI Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ +#define GPIO_AF5_DCMI ((uint8_t)0x05) /* DCMI Alternate Function mapping */ +#define GPIO_AF5_I2C4 ((uint8_t)0x05) /* I2C4 Alternate Function mapping */ +#define GPIO_AF5_QUADSPI ((uint8_t)0x05) /* QUADSPI Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF6_I2C3 ((uint8_t)0x06) /* I2C3 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ +#define GPIO_AF8_CAN2 ((uint8_t)0x08) /* CAN2 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ +#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ +#define GPIO_AF10_CAN2 ((uint8_t)0x0A) /* CAN2 Alternate Function mapping */ +#define GPIO_AF10_DCMI ((uint8_t)0x0A) /* DCMI Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_LCD ((uint8_t)0x0B) /* LCD Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_SWPMI1 ((uint8_t)0x0C) /* SWPMI1 Alternate Function mapping */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF12_TIM1_COMP2 ((uint8_t)0x0C) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF12_TIM1_COMP1 ((uint8_t)0x0C) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF12_TIM8_COMP2 ((uint8_t)0x0C) /* TIM8/COMP2 Break in Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ +#define GPIO_AF13_SAI2 ((uint8_t)0x0D) /* SAI2 Alternate Function mapping */ +#define GPIO_AF13_TIM8_COMP2 ((uint8_t)0x0D) /* TIM8/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF13_TIM8_COMP1 ((uint8_t)0x0D) /* TIM8/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM8_COMP1 ((uint8_t)0x0E) /* TIM8/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L496xx || STM32L4A6xx */ + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) +/*---STM32L4P5xx/STM32L4Q5xx--*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_TIM5 ((uint8_t)0x01) /* TIM5 Alternate Function mapping */ +#define GPIO_AF1_TIM8 ((uint8_t)0x01) /* TIM8 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_I2C4 ((uint8_t)0x03) /* I2C4 Alternate Function mapping */ +#define GPIO_AF3_OCTOSPIM_P1 ((uint8_t)0x03) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF3_SAI1 ((uint8_t)0x03) /* SAI1 Alternate Function mapping */ +#define GPIO_AF3_SPI2 ((uint8_t)0x03) /* SPI2 Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM8_COMP1 ((uint8_t)0x03) /* TIM8/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM8_COMP2 ((uint8_t)0x03) /* TIM8/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ +#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ +#define GPIO_AF4_DCMI ((uint8_t)0x04) /* DCMI Alternate Function mapping */ +#define GPIO_AF4_PSSI ((uint8_t)0x04) /* PSSI Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_DCMI ((uint8_t)0x05) /* DCMI Alternate Function mapping */ +#define GPIO_AF5_PSSI ((uint8_t)0x05) /* PSSI Alternate Function mapping */ +#define GPIO_AF5_DFSDM1 ((uint8_t)0x05) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF5_I2C4 ((uint8_t)0x05) /* I2C4 Alternate Function mapping */ +#define GPIO_AF5_OCTOSPIM_P1 ((uint8_t)0x05) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF5_OCTOSPIM_P2 ((uint8_t)0x05) /* OctoSPI Manager Port 2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF6_I2C3 ((uint8_t)0x06) /* I2C3 Alternate Function mapping */ +#define GPIO_AF6_OCTOSPIM_P1 ((uint8_t)0x06) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF6_OCTOSPIM_P2 ((uint8_t)0x06) /* OctoSPI Manager Port 2 Alternate Function mapping */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ +#define GPIO_AF7_SDMMC2 ((uint8_t)0x07) /* SDMMC2 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ +#define GPIO_AF8_SDMMC1 ((uint8_t)0x08) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF8_SDMMC2 ((uint8_t)0x08) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LTDC Alternate Function mapping */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_DCMI ((uint8_t)0x0A) /* DCMI Alternate Function mapping */ +#define GPIO_AF10_PSSI ((uint8_t)0x0A) /* PSSI Alternate Function mapping */ +#define GPIO_AF10_OCTOSPIM_P1 ((uint8_t)0x0A) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF10_OCTOSPIM_P2 ((uint8_t)0x0A) /* OctoSPI Manager Port 2 Alternate Function mapping */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_LTDC ((uint8_t)0x0B) /* LTDC Alternate Function mapping */ +#define GPIO_AF11_SDMMC2 ((uint8_t)0x0B) /* SDMMC2 Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF12_SDMMC2 ((uint8_t)0x0C) /* SDMMC2 Alternate Function mapping */ +#define GPIO_AF12_TIM1_COMP1 ((uint8_t)0x0C) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF12_TIM1_COMP2 ((uint8_t)0x0C) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF12_TIM8_COMP2 ((uint8_t)0x0C) /* TIM8/COMP2 Break in Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ +#define GPIO_AF13_SAI2 ((uint8_t)0x0D) /* SAI2 Alternate Function mapping */ +#define GPIO_AF13_TIM8_COMP1 ((uint8_t)0x0D) /* TIM8/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM8_COMP2 ((uint8_t)0x0E) /* TIM8/COMP2 Break in Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L4P5xx || STM32L4Q5xx */ + +#if defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +/*---STM32L4R5xx/STM32L4R7xx/STM32L4R9xx/STM32L4S5xx/STM32L4S7xx/STM32L4S9xx--*/ +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_TIM5 ((uint8_t)0x01) /* TIM5 Alternate Function mapping */ +#define GPIO_AF1_TIM8 ((uint8_t)0x01) /* TIM8 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#define GPIO_AF1_IR ((uint8_t)0x01) /* IR Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */ +#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_I2C4 ((uint8_t)0x03) /* I2C4 Alternate Function mapping */ +#define GPIO_AF3_OCTOSPIM_P1 ((uint8_t)0x03) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF3_SAI1 ((uint8_t)0x03) /* SAI1 Alternate Function mapping */ +#define GPIO_AF3_SPI2 ((uint8_t)0x03) /* SPI2 Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP1 ((uint8_t)0x03) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM1_COMP2 ((uint8_t)0x03) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_TIM8_COMP1 ((uint8_t)0x03) /* TIM8/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF3_TIM8_COMP2 ((uint8_t)0x03) /* TIM8/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF3_USART2 ((uint8_t)0x03) /* USART2 Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ +#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ +#define GPIO_AF4_DCMI ((uint8_t)0x04) /* DCMI Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_DCMI ((uint8_t)0x05) /* DCMI Alternate Function mapping */ +#define GPIO_AF5_DFSDM1 ((uint8_t)0x05) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF5_I2C4 ((uint8_t)0x05) /* I2C4 Alternate Function mapping */ +#define GPIO_AF5_OCTOSPIM_P1 ((uint8_t)0x05) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF5_OCTOSPIM_P2 ((uint8_t)0x05) /* OctoSPI Manager Port 2 Alternate Function mapping */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF6_I2C3 ((uint8_t)0x06) /* I2C3 Alternate Function mapping */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_LPUART1 ((uint8_t)0x08) /* LPUART1 Alternate Function mapping */ +#define GPIO_AF8_SDMMC1 ((uint8_t)0x08) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ +#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LTDC Alternate Function mapping */ +#define GPIO_AF9_TSC ((uint8_t)0x09) /* TSC Alternate Function mapping */ + +/** + * @brief AF 10 selection + */ +#define GPIO_AF10_DCMI ((uint8_t)0x0A) /* DCMI Alternate Function mapping */ +#define GPIO_AF10_OCTOSPIM_P1 ((uint8_t)0x0A) /* OctoSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF10_OCTOSPIM_P2 ((uint8_t)0x0A) /* OctoSPI Manager Port 2 Alternate Function mapping */ +#define GPIO_AF10_OTG_FS ((uint8_t)0x0A) /* OTG_FS Alternate Function mapping */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_DSI ((uint8_t)0x0B) /* DSI Alternate Function mapping */ +#define GPIO_AF11_LTDC ((uint8_t)0x0B) /* LTDC Alternate Function mapping */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_DSI ((uint8_t)0x0C) /* DSI Alternate Function mapping */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF12_TIM1_COMP1 ((uint8_t)0x0C) /* TIM1/COMP1 Break in Alternate Function mapping */ +#define GPIO_AF12_TIM1_COMP2 ((uint8_t)0x0C) /* TIM1/COMP2 Break in Alternate Function mapping */ +#define GPIO_AF12_TIM8_COMP2 ((uint8_t)0x0C) /* TIM8/COMP2 Break in Alternate Function mapping */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_SAI1 ((uint8_t)0x0D) /* SAI1 Alternate Function mapping */ +#define GPIO_AF13_SAI2 ((uint8_t)0x0D) /* SAI2 Alternate Function mapping */ +#define GPIO_AF13_TIM8_COMP1 ((uint8_t)0x0D) /* TIM8/COMP1 Break in Alternate Function mapping */ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_TIM2 ((uint8_t)0x0E) /* TIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM15 ((uint8_t)0x0E) /* TIM15 Alternate Function mapping */ +#define GPIO_AF14_TIM16 ((uint8_t)0x0E) /* TIM16 Alternate Function mapping */ +#define GPIO_AF14_TIM17 ((uint8_t)0x0E) /* TIM17 Alternate Function mapping */ +#define GPIO_AF14_LPTIM2 ((uint8_t)0x0E) /* LPTIM2 Alternate Function mapping */ +#define GPIO_AF14_TIM8_COMP2 ((uint8_t)0x0E) /* TIM8/COMP2 Break in Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros + * @{ + */ + +/** @defgroup GPIOEx_Get_Port_Index GPIOEx_Get Port Index +* @{ + */ +#if defined(STM32L412xx) || defined(STM32L422xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL : 7uL) + +#endif /* STM32L412xx || STM32L422xx */ + +#if defined(STM32L431xx) || defined(STM32L433xx) || defined(STM32L443xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL : 7uL) + +#endif /* STM32L431xx || STM32L433xx || STM32L443xx */ + +#if defined(STM32L432xx) || defined(STM32L442xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL : 7uL) + +#endif /* STM32L432xx || STM32L442xx */ + +#if defined(STM32L451xx) || defined(STM32L452xx) || defined(STM32L462xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL : 7uL) + +#endif /* STM32L451xx || STM32L452xx || STM32L462xx */ + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL :\ + ((__GPIOx__) == (GPIOF))? 5uL :\ + ((__GPIOx__) == (GPIOG))? 6uL : 7uL) + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + +#if defined(STM32L496xx) || defined(STM32L4A6xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL :\ + ((__GPIOx__) == (GPIOF))? 5uL :\ + ((__GPIOx__) == (GPIOG))? 6uL :\ + ((__GPIOx__) == (GPIOH))? 7uL : 8uL) + +#endif /* STM32L496xx || STM32L4A6xx */ + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL :\ + ((__GPIOx__) == (GPIOB))? 1uL :\ + ((__GPIOx__) == (GPIOC))? 2uL :\ + ((__GPIOx__) == (GPIOD))? 3uL :\ + ((__GPIOx__) == (GPIOE))? 4uL :\ + ((__GPIOx__) == (GPIOF))? 5uL :\ + ((__GPIOx__) == (GPIOG))? 6uL :\ + ((__GPIOx__) == (GPIOH))? 7uL : 8uL) + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_GPIO_EX_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h new file mode 100644 index 0000000..a4671ee --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c.h @@ -0,0 +1,838 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_i2c.h + * @author MCD Application Team + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_I2C_H +#define STM32L4xx_HAL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. + This parameter calculated by referring to I2C initialization section + in Reference manual */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_ADDRESSING_MODE */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing + mode is selected. + This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ + +} I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap :\n + * b7-b6 Error information\n + * 00 : No Error\n + * 01 : Abort (Abort user request on going)\n + * 10 : Timeout\n + * 11 : Error\n + * b5 Peripheral initialization status\n + * 0 : Reset (peripheral not initialized)\n + * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n + * b4 (not used)\n + * x : Should be set to 0\n + * b3\n + * 0 : Ready or Busy (No Listen mode ongoing)\n + * 1 : Listen (peripheral in Address Listen Mode)\n + * b2 Intrinsic process state\n + * 0 : Ready\n + * 1 : Busy (peripheral busy with some configuration or internal operations)\n + * b1 Rx state\n + * 0 : Ready (no Rx operation ongoing)\n + * 1 : Busy (Rx operation ongoing)\n + * b0 Tx state\n + * 0 : Ready (no Tx operation ongoing)\n + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + +} HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap :\n + * b7 (not used)\n + * x : Should be set to 0\n + * b6\n + * 0 : None\n + * 1 : Memory (HAL I2C communication is in Memory Mode)\n + * b5\n + * 0 : None\n + * 1 : Slave (HAL I2C communication is in Slave Mode)\n + * b4\n + * 0 : None\n + * 1 : Master (HAL I2C communication is in Master Mode)\n + * b3-b2-b1-b0 (not used)\n + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +} HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ +#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ +#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +typedef struct __I2C_HandleTypeDef +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can + be a value of @ref I2C_XFEROPTIONS */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state */ + + HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); + /*!< I2C transfer IRQ handler function pointer */ + + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ + + __IO uint32_t Devaddress; /*!< I2C Target device address */ + + __IO uint32_t Memaddress; /*!< I2C Target memory address */ + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Listen Complete callback */ + void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Tx Transfer completed callback */ + void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Rx Transfer completed callback */ + void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Error callback */ + void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Abort callback */ + + void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); + /*!< I2C Slave Address Match callback */ + + void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp Init callback */ + void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp DeInit callback */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} I2C_HandleTypeDef; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief HAL I2C Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ + HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ + HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ + HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ + HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ + HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ + HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ + HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ + HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ + + HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ + HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ + +} HAL_I2C_CallbackIDTypeDef; + +/** + * @brief HAL I2C Callback pointer definition + */ +typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); +/*!< pointer to an I2C callback function */ +typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, + uint16_t AddrMatchCode); +/*!< pointer to an I2C Address Match callback function */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options + * @{ + */ +#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) +#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define I2C_OTHER_FRAME (0x000000AAU) +#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) +/** + * @} + */ + +/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) +#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE (0x00000000U) +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks + * @{ + */ +#define I2C_OA2_NOMASK ((uint8_t)0x00U) +#define I2C_OA2_MASK01 ((uint8_t)0x01U) +#define I2C_OA2_MASK02 ((uint8_t)0x02U) +#define I2C_OA2_MASK03 ((uint8_t)0x03U) +#define I2C_OA2_MASK04 ((uint8_t)0x04U) +#define I2C_OA2_MASK05 ((uint8_t)0x05U) +#define I2C_OA2_MASK06 ((uint8_t)0x06U) +#define I2C_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + +/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE (0x00000000U) +#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE (0x00000000U) +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT (0x00000001U) +#define I2C_MEMADD_SIZE_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View + * @{ + */ +#define I2C_DIRECTION_TRANSMIT (0x00000000U) +#define I2C_DIRECTION_RECEIVE (0x00000001U) +/** + * @} + */ + +/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode + * @{ + */ +#define I2C_RELOAD_MODE I2C_CR2_RELOAD +#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND +#define I2C_SOFTEND_MODE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode + * @{ + */ +#define I2C_NO_STARTSTOP (0x00000000U) +#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_ERRI I2C_CR1_ERRIE +#define I2C_IT_TCI I2C_CR1_TCIE +#define I2C_IT_STOPI I2C_CR1_STOPIE +#define I2C_IT_NACKI I2C_CR1_NACKIE +#define I2C_IT_ADDRI I2C_CR1_ADDRIE +#define I2C_IT_RXI I2C_CR1_RXIE +#define I2C_IT_TXI I2C_CR1_TXIE +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ +#define I2C_FLAG_TXE I2C_ISR_TXE +#define I2C_FLAG_TXIS I2C_ISR_TXIS +#define I2C_FLAG_RXNE I2C_ISR_RXNE +#define I2C_FLAG_ADDR I2C_ISR_ADDR +#define I2C_FLAG_AF I2C_ISR_NACKF +#define I2C_FLAG_STOPF I2C_ISR_STOPF +#define I2C_FLAG_TC I2C_ISR_TC +#define I2C_FLAG_TCR I2C_ISR_TCR +#define I2C_FLAG_BERR I2C_ISR_BERR +#define I2C_FLAG_ARLO I2C_ISR_ARLO +#define I2C_FLAG_OVR I2C_ISR_OVR +#define I2C_FLAG_PECERR I2C_ISR_PECERR +#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_FLAG_ALERT I2C_ISR_ALERT +#define I2C_FLAG_BUSY I2C_ISR_BUSY +#define I2C_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** @brief Enable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified I2C interrupt source is enabled or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \ + (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_TXIS Transmit interrupt status + * @arg @ref I2C_FLAG_RXNE Receive data register not empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_TC Transfer complete (master mode) + * @arg @ref I2C_FLAG_TCR Transfer complete reload + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * @arg @ref I2C_FLAG_BUSY Bus busy + * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define I2C_FLAG_MASK (0x0001FFFFU) +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \ + (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? \ + ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ + ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) +/** + * @} + */ + +/* Include I2C HAL Extended module */ +#include "stm32l4xx_hal_i2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); + +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macro I2C Private Macros + * @{ + */ + +#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == I2C_ADDRESSINGMODE_10BIT)) + +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) + +#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ + ((MASK) == I2C_OA2_MASK01) || \ + ((MASK) == I2C_OA2_MASK02) || \ + ((MASK) == I2C_OA2_MASK03) || \ + ((MASK) == I2C_OA2_MASK04) || \ + ((MASK) == I2C_OA2_MASK05) || \ + ((MASK) == I2C_OA2_MASK06) || \ + ((MASK) == I2C_OA2_MASK07)) + +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) + +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) + +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) + +#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ + ((MODE) == I2C_AUTOEND_MODE) || \ + ((MODE) == I2C_SOFTEND_MODE)) + +#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ + ((REQUEST) == I2C_GENERATE_START_READ) || \ + ((REQUEST) == I2C_GENERATE_START_WRITE) || \ + ((REQUEST) == I2C_NO_STARTSTOP)) + +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ + IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) + +#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ + ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) + +#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ + (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \ + I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ + I2C_CR2_RD_WRN))) + +#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) \ + >> 16U)) +#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) \ + >> 16U)) +#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) +#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \ + (uint16_t)(0xFF00U))) >> 8U))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) + +#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ + (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_ADD10) | (I2C_CR2_START) | \ + (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN))) + +#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \ + ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) +#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions are defined in stm32l4xx_hal_i2c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32L4xx_HAL_I2C_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h new file mode 100644 index 0000000..15ed69a --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_i2c_ex.h @@ -0,0 +1,184 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_i2c_ex.h + * @author MCD Application Team + * @brief Header file of I2C HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_I2C_EX_H +#define STM32L4xx_HAL_I2C_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2CEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants + * @{ + */ + +/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter + * @{ + */ +#define I2C_ANALOGFILTER_ENABLE 0x00000000U +#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus + * @{ + */ +#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ +#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#if defined(SYSCFG_CFGR1_I2C_PB8_FMP) +#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ +#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ +#else +#define I2C_FASTMODEPLUS_PB8 (uint32_t)(0x00000010U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB8 not supported */ +#define I2C_FASTMODEPLUS_PB9 (uint32_t)(0x00000012U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB9 not supported */ +#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */ +#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ +#if defined(SYSCFG_CFGR1_I2C2_FMP) +#define I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */ +#else +#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */ +#endif /* SYSCFG_CFGR1_I2C2_FMP */ +#define I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */ +#if defined(SYSCFG_CFGR1_I2C4_FMP) +#define I2C_FASTMODEPLUS_I2C4 SYSCFG_CFGR1_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */ +#else +#define I2C_FASTMODEPLUS_I2C4 (uint32_t)(0x00000800U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C4 not supported */ +#endif /* SYSCFG_CFGR1_I2C4_FMP */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @addtogroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @{ + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @{ + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros + * @{ + */ +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ + ((FILTER) == I2C_ANALOGFILTER_DISABLE)) + +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FMP_NOT_SUPPORTED) != I2C_FMP_NOT_SUPPORTED) && \ + ((((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C3)) == I2C_FASTMODEPLUS_I2C3) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C4)) == I2C_FASTMODEPLUS_I2C4))) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32l4xx_hal_i2c_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_I2C_EX_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h new file mode 100644 index 0000000..e90fcb7 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr.h @@ -0,0 +1,411 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_PWR_H +#define STM32L4xx_HAL_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. + This parameter can be a value of @ref PWR_PVD_detection_level. */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWR_PVD_Mode. */ +}PWR_PVDTypeDef; + + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + + +/** @defgroup PWR_PVD_detection_level Programmable Voltage Detection levels + * @{ + */ +#define PWR_PVDLEVEL_0 PWR_CR2_PLS_LEV0 /*!< PVD threshold around 2.0 V */ +#define PWR_PVDLEVEL_1 PWR_CR2_PLS_LEV1 /*!< PVD threshold around 2.2 V */ +#define PWR_PVDLEVEL_2 PWR_CR2_PLS_LEV2 /*!< PVD threshold around 2.4 V */ +#define PWR_PVDLEVEL_3 PWR_CR2_PLS_LEV3 /*!< PVD threshold around 2.5 V */ +#define PWR_PVDLEVEL_4 PWR_CR2_PLS_LEV4 /*!< PVD threshold around 2.6 V */ +#define PWR_PVDLEVEL_5 PWR_CR2_PLS_LEV5 /*!< PVD threshold around 2.8 V */ +#define PWR_PVDLEVEL_6 PWR_CR2_PLS_LEV6 /*!< PVD threshold around 2.9 V */ +#define PWR_PVDLEVEL_7 PWR_CR2_PLS_LEV7 /*!< External input analog voltage (compared internally to VREFINT) */ +/** + * @} + */ + +/** @defgroup PWR_PVD_Mode PWR PVD interrupt and event mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< Basic mode is used */ +#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + + + + +/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR regulator mode + * @{ + */ +#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000) /*!< Regulator in main mode */ +#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPR /*!< Regulator in low-power mode */ +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Sleep mode */ +#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Sleep mode */ +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Stop mode */ +#define PWR_STOPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Stop mode */ +/** + * @} + */ + + +/** @defgroup PWR_PVD_EXTI_LINE PWR PVD external interrupt line + * @{ + */ +#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ +/** + * @} + */ + +/** @defgroup PWR_PVD_EVENT_LINE PWR PVD event line + * @{ + */ +#define PWR_EVENT_LINE_PVD ((uint32_t)0x00010000) /*!< Event line 16 Connected to the PVD Event Line */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @brief Check whether or not a specific PWR flag is set. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event + * was received from the WKUP pin 1. + * @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event + * was received from the WKUP pin 2. + * @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event + * was received from the WKUP pin 3. + * @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event + * was received from the WKUP pin 4. + * @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event + * was received from the WKUP pin 5. + * @arg @ref PWR_FLAG_SB StandBy Flag. Indicates that the system + * entered StandBy mode. + * @arg @ref PWR_FLAG_EXT_SMPS External SMPS Ready Flag. When available on device, indicates + * that external switch can be closed to connect to the external SMPS, when the Range 2 + * of internal regulator is ready. + * @arg @ref PWR_FLAG_WUFI Wake-Up Flag Internal. Set when a wakeup is detected on + * the internal wakeup line. + * @arg @ref PWR_FLAG_REGLPS Low Power Regulator Started. Indicates whether or not the + * low-power regulator is ready. + * @arg @ref PWR_FLAG_REGLPF Low Power Regulator Flag. Indicates whether the + * regulator is ready in main mode or is in low-power mode. + * @arg @ref PWR_FLAG_VOSF Voltage Scaling Flag. Indicates whether the regulator is ready + * in the selected voltage range or is still changing to the required voltage level. + * @arg @ref PWR_FLAG_PVDO Power Voltage Detector Output. Indicates whether VDD voltage is + * below or above the selected PVD threshold. + * @arg @ref PWR_FLAG_PVMO1 Peripheral Voltage Monitoring Output 1. Indicates whether VDDUSB voltage is + * is below or above PVM1 threshold (applicable when USB feature is supported). + @if STM32L486xx + * @arg @ref PWR_FLAG_PVMO2 Peripheral Voltage Monitoring Output 2. Indicates whether VDDIO2 voltage is + * is below or above PVM2 threshold (applicable when VDDIO2 is present on device). + @endif + * @arg @ref PWR_FLAG_PVMO3 Peripheral Voltage Monitoring Output 3. Indicates whether VDDA voltage is + * is below or above PVM3 threshold. + * @arg @ref PWR_FLAG_PVMO4 Peripheral Voltage Monitoring Output 4. Indicates whether VDDA voltage is + * is below or above PVM4 threshold. + * + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_FLAG(__FLAG__) ( ((((uint8_t)(__FLAG__)) >> 5U) == 1) ?\ + (PWR->SR1 & (1U << ((__FLAG__) & 31U))) :\ + (PWR->SR2 & (1U << ((__FLAG__) & 31U))) ) + +/** @brief Clear a specific PWR flag. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event + * was received from the WKUP pin 1. + * @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event + * was received from the WKUP pin 2. + * @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event + * was received from the WKUP pin 3. + * @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event + * was received from the WKUP pin 4. + * @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event + * was received from the WKUP pin 5. + * @arg @ref PWR_FLAG_WU Encompasses all five Wake Up Flags. + * @arg @ref PWR_FLAG_SB Standby Flag. Indicates that the system + * entered Standby mode. + * @retval None + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) ( (((uint8_t)(__FLAG__)) == PWR_FLAG_WU) ?\ + (PWR->SCR = (__FLAG__)) :\ + (PWR->SCR = (1U << ((__FLAG__) & 31U))) ) +/** + * @brief Enable the PVD Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Event Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) + +/** + * @brief Disable the PVD Event Line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + + +/** + * @brief Disable the PVD Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + + +/** + * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD) + +/** + * @brief Check whether or not the PVD EXTI interrupt flag is set. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR1 & PWR_EXTI_LINE_PVD) + +/** + * @brief Clear the PVD EXTI interrupt flag. + * @retval None + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, PWR_EXTI_LINE_PVD) + +/** + * @} + */ + + +/* Private macros --------------------------------------------------------*/ +/** @addtogroup PWR_Private_Macros PWR Private Macros + * @{ + */ + +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ + ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ + ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ + ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) + +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_NORMAL) ||\ + ((MODE) == PWR_PVD_MODE_IT_RISING) ||\ + ((MODE) == PWR_PVD_MODE_IT_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING)) + +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) + +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) + +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE) ) + +/** + * @} + */ + +/* Include PWR HAL Extended module */ +#include "stm32l4xx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions *******************************/ +void HAL_PWR_DeInit(void); +void HAL_PWR_EnableBkUpAccess(void); +void HAL_PWR_DisableBkUpAccess(void); + +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); +void HAL_PWR_EnablePVD(void); +void HAL_PWR_DisablePVD(void); + + +/* WakeUp pins configuration functions ****************************************/ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity); +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); + +/* Low Power modes configuration functions ************************************/ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSTANDBYMode(void); + +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); + +void HAL_PWR_PVDCallback(void); + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32L4xx_HAL_PWR_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h new file mode 100644 index 0000000..71dbbb3 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_pwr_ex.h @@ -0,0 +1,929 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_pwr_ex.h + * @author MCD Application Team + * @brief Header file of PWR HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_PWR_EX_H +#define STM32L4xx_HAL_PWR_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Types PWR Extended Exported Types + * @{ + */ + + +/** + * @brief PWR PVM configuration structure definition + */ +typedef struct +{ + uint32_t PVMType; /*!< PVMType: Specifies which voltage is monitored and against which threshold. + This parameter can be a value of @ref PWREx_PVM_Type. + @arg @ref PWR_PVM_1 Peripheral Voltage Monitoring 1 enable: VDDUSB versus 1.2 V (applicable when USB feature is supported). +@if STM32L486xx + @arg @ref PWR_PVM_2 Peripheral Voltage Monitoring 2 enable: VDDIO2 versus 0.9 V (applicable when VDDIO2 is present on device). +@endif + @arg @ref PWR_PVM_3 Peripheral Voltage Monitoring 3 enable: VDDA versus 1.62 V. + @arg @ref PWR_PVM_4 Peripheral Voltage Monitoring 4 enable: VDDA versus 2.2 V. */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWREx_PVM_Mode. */ +}PWR_PVMTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants + * @{ + */ + +/** @defgroup PWREx_WUP_Polarity Shift to apply to retrieve polarity information from PWR_WAKEUP_PINy_xxx constants + * @{ + */ +#define PWR_WUP_POLARITY_SHIFT 0x05 /*!< Internal constant used to retrieve wakeup pin polariry */ +/** + * @} + */ + + +/** @defgroup PWREx_WakeUp_Pins PWR wake-up pins + * @{ + */ +#define PWR_WAKEUP_PIN1 PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level polarity) */ +#define PWR_WAKEUP_PIN2 PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level polarity) */ +#define PWR_WAKEUP_PIN3 PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level polarity) */ +#define PWR_WAKEUP_PIN4 PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level polarity) */ +#define PWR_WAKEUP_PIN5 PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level polarity) */ +#define PWR_WAKEUP_PIN1_HIGH PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level polarity) */ +#define PWR_WAKEUP_PIN2_HIGH PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level polarity) */ +#define PWR_WAKEUP_PIN3_HIGH PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level polarity) */ +#define PWR_WAKEUP_PIN4_HIGH PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level polarity) */ +#define PWR_WAKEUP_PIN5_HIGH PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level polarity) */ +#define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR4_WP1<IMR2, PWR_EXTI_LINE_PVM1) + +/** + * @brief Disable the PVM1 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM1) + +/** + * @brief Enable the PVM1 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM1) + +/** + * @brief Disable the PVM1 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM1) + +/** + * @brief Enable the PVM1 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM1) + +/** + * @brief Disable the PVM1 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM1) + +/** + * @brief Enable the PVM1 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM1) + + +/** + * @brief Disable the PVM1 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM1) + + +/** + * @brief PVM1 EXTI line configuration: set rising & falling edge trigger. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM1_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVM1_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the PVM1 Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM1_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVM1_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM1) + +/** + * @brief Check whether the specified PVM1 EXTI interrupt flag is set or not. + * @retval EXTI PVM1 Line Status. + */ +#define __HAL_PWR_PVM1_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM1) + +/** + * @brief Clear the PVM1 EXTI flag. + * @retval None + */ +#define __HAL_PWR_PVM1_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM1) + +#endif /* PWR_CR2_PVME1 */ + + +#if defined(PWR_CR2_PVME2) +/** + * @brief Enable the PVM2 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM2) + +/** + * @brief Disable the PVM2 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM2) + +/** + * @brief Enable the PVM2 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM2) + +/** + * @brief Disable the PVM2 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM2) + +/** + * @brief Enable the PVM2 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM2) + +/** + * @brief Disable the PVM2 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM2) + +/** + * @brief Enable the PVM2 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM2) + + +/** + * @brief Disable the PVM2 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM2) + + +/** + * @brief PVM2 EXTI line configuration: set rising & falling edge trigger. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM2_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVM2_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the PVM2 Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM2_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVM2_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM2) + +/** + * @brief Check whether the specified PVM2 EXTI interrupt flag is set or not. + * @retval EXTI PVM2 Line Status. + */ +#define __HAL_PWR_PVM2_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM2) + +/** + * @brief Clear the PVM2 EXTI flag. + * @retval None + */ +#define __HAL_PWR_PVM2_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM2) + +#endif /* PWR_CR2_PVME2 */ + + +/** + * @brief Enable the PVM3 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM3) + +/** + * @brief Disable the PVM3 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM3) + +/** + * @brief Enable the PVM3 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM3) + +/** + * @brief Disable the PVM3 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM3) + +/** + * @brief Enable the PVM3 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM3) + +/** + * @brief Disable the PVM3 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM3) + +/** + * @brief Enable the PVM3 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM3) + + +/** + * @brief Disable the PVM3 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM3) + + +/** + * @brief PVM3 EXTI line configuration: set rising & falling edge trigger. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM3_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVM3_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the PVM3 Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM3_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVM3_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM3) + +/** + * @brief Check whether the specified PVM3 EXTI interrupt flag is set or not. + * @retval EXTI PVM3 Line Status. + */ +#define __HAL_PWR_PVM3_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM3) + +/** + * @brief Clear the PVM3 EXTI flag. + * @retval None + */ +#define __HAL_PWR_PVM3_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM3) + + + + +/** + * @brief Enable the PVM4 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM4) + +/** + * @brief Disable the PVM4 Extended Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM4) + +/** + * @brief Enable the PVM4 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM4) + +/** + * @brief Disable the PVM4 Event Line. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM4) + +/** + * @brief Enable the PVM4 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM4) + +/** + * @brief Disable the PVM4 Extended Interrupt Rising Trigger. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM4) + +/** + * @brief Enable the PVM4 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM4) + + +/** + * @brief Disable the PVM4 Extended Interrupt Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM4) + + +/** + * @brief PVM4 EXTI line configuration: set rising & falling edge trigger. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM4_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVM4_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the PVM4 Extended Interrupt Rising & Falling Trigger. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_PWR_PVM4_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVM4_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Generate a Software interrupt on selected EXTI line. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM4) + +/** + * @brief Check whether or not the specified PVM4 EXTI interrupt flag is set. + * @retval EXTI PVM4 Line Status. + */ +#define __HAL_PWR_PVM4_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM4) + +/** + * @brief Clear the PVM4 EXTI flag. + * @retval None + */ +#define __HAL_PWR_PVM4_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM4) + + +/** + * @brief Configure the main internal regulator output voltage. + * @param __REGULATOR__ specifies the regulator output voltage to achieve + * a tradeoff between performance and power consumption. + * This parameter can be one of the following values: + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1 Regulator voltage output range 1 mode, + * typical output voltage at 1.2 V, + * system frequency up to 80 MHz. + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE2 Regulator voltage output range 2 mode, + * typical output voltage at 1.0 V, + * system frequency up to 26 MHz. + * @note This macro is similar to HAL_PWREx_ControlVoltageScaling() API but doesn't check + * whether or not VOSF flag is cleared when moving from range 2 to range 1. User + * may resort to __HAL_PWR_GET_FLAG() macro to check VOSF bit resetting. + * @retval None + */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ + __IO uint32_t tmpreg; \ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS); \ + UNUSED(tmpreg); \ + } while(0) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @addtogroup PWREx_Private_Macros PWR Extended Private Macros + * @{ + */ + +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ + ((PIN) == PWR_WAKEUP_PIN2) || \ + ((PIN) == PWR_WAKEUP_PIN3) || \ + ((PIN) == PWR_WAKEUP_PIN4) || \ + ((PIN) == PWR_WAKEUP_PIN5) || \ + ((PIN) == PWR_WAKEUP_PIN1_HIGH) || \ + ((PIN) == PWR_WAKEUP_PIN2_HIGH) || \ + ((PIN) == PWR_WAKEUP_PIN3_HIGH) || \ + ((PIN) == PWR_WAKEUP_PIN4_HIGH) || \ + ((PIN) == PWR_WAKEUP_PIN5_HIGH) || \ + ((PIN) == PWR_WAKEUP_PIN1_LOW) || \ + ((PIN) == PWR_WAKEUP_PIN2_LOW) || \ + ((PIN) == PWR_WAKEUP_PIN3_LOW) || \ + ((PIN) == PWR_WAKEUP_PIN4_LOW) || \ + ((PIN) == PWR_WAKEUP_PIN5_LOW)) + +#if defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_1) ||\ + ((TYPE) == PWR_PVM_2) ||\ + ((TYPE) == PWR_PVM_3) ||\ + ((TYPE) == PWR_PVM_4)) +#elif defined (STM32L471xx) +#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_2) ||\ + ((TYPE) == PWR_PVM_3) ||\ + ((TYPE) == PWR_PVM_4)) +#endif + +#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L433xx) || defined (STM32L443xx) || defined (STM32L452xx) || defined (STM32L462xx) +#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_1) ||\ + ((TYPE) == PWR_PVM_3) ||\ + ((TYPE) == PWR_PVM_4)) +#elif defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L442xx) || defined (STM32L451xx) +#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_3) ||\ + ((TYPE) == PWR_PVM_4)) +#endif + +#define IS_PWR_PVM_MODE(MODE) (((MODE) == PWR_PVM_MODE_NORMAL) ||\ + ((MODE) == PWR_PVM_MODE_IT_RISING) ||\ + ((MODE) == PWR_PVM_MODE_IT_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_PVM_MODE_EVENT_RISING_FALLING)) + +#if defined(PWR_CR5_R1MODE) +#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) || \ + ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ + ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) +#else +#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ + ((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) +#endif + + +#define IS_PWR_BATTERY_RESISTOR_SELECT(RESISTOR) (((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_5) ||\ + ((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_1_5)) + +#define IS_PWR_BATTERY_CHARGING(CHARGING) (((CHARGING) == PWR_BATTERY_CHARGING_DISABLE) ||\ + ((CHARGING) == PWR_BATTERY_CHARGING_ENABLE)) + +#define IS_PWR_GPIO_BIT_NUMBER(BIT_NUMBER) (((BIT_NUMBER) & GPIO_PIN_MASK) != (uint32_t)0x00) + + +#if defined (STM32L412xx) || defined (STM32L422xx) +#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ + ((GPIO) == PWR_GPIO_B) ||\ + ((GPIO) == PWR_GPIO_C) ||\ + ((GPIO) == PWR_GPIO_D) ||\ + ((GPIO) == PWR_GPIO_H)) +#elif defined (STM32L431xx) || defined (STM32L433xx) || defined (STM32L443xx) || \ + defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) +#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ + ((GPIO) == PWR_GPIO_B) ||\ + ((GPIO) == PWR_GPIO_C) ||\ + ((GPIO) == PWR_GPIO_D) ||\ + ((GPIO) == PWR_GPIO_E) ||\ + ((GPIO) == PWR_GPIO_H)) +#elif defined (STM32L432xx) || defined (STM32L442xx) +#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ + ((GPIO) == PWR_GPIO_B) ||\ + ((GPIO) == PWR_GPIO_C) ||\ + ((GPIO) == PWR_GPIO_H)) +#elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) +#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ + ((GPIO) == PWR_GPIO_B) ||\ + ((GPIO) == PWR_GPIO_C) ||\ + ((GPIO) == PWR_GPIO_D) ||\ + ((GPIO) == PWR_GPIO_E) ||\ + ((GPIO) == PWR_GPIO_F) ||\ + ((GPIO) == PWR_GPIO_G) ||\ + ((GPIO) == PWR_GPIO_H)) +#elif defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ + ((GPIO) == PWR_GPIO_B) ||\ + ((GPIO) == PWR_GPIO_C) ||\ + ((GPIO) == PWR_GPIO_D) ||\ + ((GPIO) == PWR_GPIO_E) ||\ + ((GPIO) == PWR_GPIO_F) ||\ + ((GPIO) == PWR_GPIO_G) ||\ + ((GPIO) == PWR_GPIO_H) ||\ + ((GPIO) == PWR_GPIO_I)) +#endif + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) +#define IS_PWR_SRAM2_RETENTION(SRAM2) (((SRAM2) == PWR_NO_SRAM2_RETENTION) ||\ + ((SRAM2) == PWR_FULL_SRAM2_RETENTION) ||\ + ((SRAM2) == PWR_4KBYTES_SRAM2_RETENTION)) +#else +#define IS_PWR_SRAM2_RETENTION(SRAM2) (((SRAM2) == PWR_NO_SRAM2_RETENTION) ||\ + ((SRAM2) == PWR_FULL_SRAM2_RETENTION)) +#endif + +/** + * @} + */ + + +/** @addtogroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions + * @{ + */ + + +/* Peripheral Control functions **********************************************/ +uint32_t HAL_PWREx_GetVoltageRange(void); +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); +void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection); +void HAL_PWREx_DisableBatteryCharging(void); +#if defined(PWR_CR2_USV) +void HAL_PWREx_EnableVddUSB(void); +void HAL_PWREx_DisableVddUSB(void); +#endif /* PWR_CR2_USV */ +#if defined(PWR_CR2_IOSV) +void HAL_PWREx_EnableVddIO2(void); +void HAL_PWREx_DisableVddIO2(void); +#endif /* PWR_CR2_IOSV */ +void HAL_PWREx_EnableInternalWakeUpLine(void); +void HAL_PWREx_DisableInternalWakeUpLine(void); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +void HAL_PWREx_EnablePullUpPullDownConfig(void); +void HAL_PWREx_DisablePullUpPullDownConfig(void); +void HAL_PWREx_EnableSRAM2ContentRetention(void); +void HAL_PWREx_DisableSRAM2ContentRetention(void); +HAL_StatusTypeDef HAL_PWREx_SetSRAM2ContentRetention(uint32_t SRAM2Size); +#if defined(PWR_CR1_RRSTP) +void HAL_PWREx_EnableSRAM3ContentRetention(void); +void HAL_PWREx_DisableSRAM3ContentRetention(void); +#endif /* PWR_CR1_RRSTP */ +#if defined(PWR_CR3_DSIPDEN) +void HAL_PWREx_EnableDSIPinsPDActivation(void); +void HAL_PWREx_DisableDSIPinsPDActivation(void); +#endif /* PWR_CR3_DSIPDEN */ +#if defined(PWR_CR2_PVME1) +void HAL_PWREx_EnablePVM1(void); +void HAL_PWREx_DisablePVM1(void); +#endif /* PWR_CR2_PVME1 */ +#if defined(PWR_CR2_PVME2) +void HAL_PWREx_EnablePVM2(void); +void HAL_PWREx_DisablePVM2(void); +#endif /* PWR_CR2_PVME2 */ +void HAL_PWREx_EnablePVM3(void); +void HAL_PWREx_DisablePVM3(void); +void HAL_PWREx_EnablePVM4(void); +void HAL_PWREx_DisablePVM4(void); +HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM); +#if defined(PWR_CR3_ENULP) +void HAL_PWREx_EnableBORPVD_ULP(void); +void HAL_PWREx_DisableBORPVD_ULP(void); +#endif /* PWR_CR3_ENULP */ +#if defined(PWR_CR4_EXT_SMPS_ON) +void HAL_PWREx_EnableExtSMPS_0V95(void); +void HAL_PWREx_DisableExtSMPS_0V95(void); +#endif /* PWR_CR4_EXT_SMPS_ON */ + + +/* Low Power modes configuration functions ************************************/ +void HAL_PWREx_EnableLowPowerRunMode(void); +HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void); +void HAL_PWREx_EnterSTOP0Mode(uint8_t STOPEntry); +void HAL_PWREx_EnterSTOP1Mode(uint8_t STOPEntry); +void HAL_PWREx_EnterSTOP2Mode(uint8_t STOPEntry); +void HAL_PWREx_EnterSHUTDOWNMode(void); + +void HAL_PWREx_PVD_PVM_IRQHandler(void); +#if defined(PWR_CR2_PVME1) +void HAL_PWREx_PVM1Callback(void); +#endif /* PWR_CR2_PVME1 */ +#if defined(PWR_CR2_PVME2) +void HAL_PWREx_PVM2Callback(void); +#endif /* PWR_CR2_PVME2 */ +void HAL_PWREx_PVM3Callback(void); +void HAL_PWREx_PVM4Callback(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32L4xx_HAL_PWR_EX_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h new file mode 100644 index 0000000..f53e208 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc.h @@ -0,0 +1,4883 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_RCC_H +#define STM32L4xx_HAL_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 16 on STM32L4Rx/STM32L4Sx devices. + This parameter must be a number between Min_Data = 1 and Max_Data = 8 on the other devices */ + + uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 8 and Max_Data = 86 */ + +#if defined(RCC_PLLP_SUPPORT) + uint32_t PLLP; /*!< PLLP: Division factor for SAI clock. + This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ +#endif /* RCC_PLLP_SUPPORT */ + + uint32_t PLLQ; /*!< PLLQ: Division factor for SDMMC1, RNG and USB clocks. + This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */ + + uint32_t PLLR; /*!< PLLR: Division for the main system clock. + User have to set the PLLR parameter correctly to not exceed max frequency 120MHZ + on STM32L4Rx/STM32L4Sx devices else 80MHz on the other devices. + This parameter must be a value of @ref RCC_PLLR_Clock_Divider */ + +}RCC_PLLInitTypeDef; + +/** + * @brief RCC Internal/External Oscillator (HSE, HSI, MSI, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t HSICalibrationValue; /*!< The calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0 and Max_Data = 31 on + STM32L43x/STM32L44x/STM32L47x/STM32L48x devices. + This parameter must be a number between Min_Data = 0 and Max_Data = 127 on + the other devices */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ +#if defined(RCC_CSR_LSIPREDIV) + + uint32_t LSIDiv; /*!< The division factor of the LSI. + This parameter can be a value of @ref RCC_LSI_Div */ +#endif /* RCC_CSR_LSIPREDIV */ + + uint32_t MSIState; /*!< The new state of the MSI. + This parameter can be a value of @ref RCC_MSI_Config */ + + uint32_t MSICalibrationValue; /*!< The calibration trimming value (default is RCC_MSICALIBRATION_DEFAULT). + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + + uint32_t MSIClockRange; /*!< The MSI frequency range. + This parameter can be a value of @ref RCC_MSI_Clock_Range */ + + uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32L43x/STM32L44x/STM32L49x/STM32L4Ax devices). + This parameter can be a value of @ref RCC_HSI48_Config */ + + RCC_PLLInitTypeDef PLL; /*!< Main PLL structure parameters */ + +}RCC_OscInitTypeDef; + +/** + * @brief RCC System, AHB and APB busses clock configuration structure definition + */ +typedef struct +{ + uint32_t ClockType; /*!< The clock to be configured. + This parameter can be a value of @ref RCC_System_Clock_Type */ + + uint32_t SYSCLKSource; /*!< The clock source used as system clock (SYSCLK). + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_AHB_Clock_Source */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ + +}RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_Timeout_Value Timeout Values + * @{ + */ +#define RCC_DBP_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE 0x00000000U /*!< Oscillator configuration unchanged */ +#define RCC_OSCILLATORTYPE_HSE 0x00000001U /*!< HSE to configure */ +#define RCC_OSCILLATORTYPE_HSI 0x00000002U /*!< HSI to configure */ +#define RCC_OSCILLATORTYPE_LSE 0x00000004U /*!< LSE to configure */ +#define RCC_OSCILLATORTYPE_LSI 0x00000008U /*!< LSI to configure */ +#define RCC_OSCILLATORTYPE_MSI 0x00000010U /*!< MSI to configure */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_OSCILLATORTYPE_HSI48 0x00000020U /*!< HSI48 to configure */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF 0x00000000U /*!< HSE clock deactivation */ +#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ +#define RCC_HSE_BYPASS (RCC_CR_HSEBYP | RCC_CR_HSEON) /*!< External clock source for HSE clock */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF 0x00000000U /*!< LSE clock deactivation */ +#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */ +#define RCC_LSE_BYPASS (RCC_BDCR_LSEBYP | RCC_BDCR_LSEON) /*!< External clock source for LSE clock */ +#if defined(RCC_BDCR_LSESYSDIS) +#define RCC_LSE_ON_RTC_ONLY (RCC_BDCR_LSESYSDIS | RCC_BDCR_LSEON) /*!< LSE clock activation without propagation to system */ +#define RCC_LSE_BYPASS_RTC_ONLY (RCC_BDCR_LSEBYP | RCC_BDCR_LSESYSDIS | RCC_BDCR_LSEON) /*!< External clock source for LSE clock without propagation to system */ +#endif /* RCC_BDCR_LSESYSDIS */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF 0x00000000U /*!< HSI clock deactivation */ +#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ + +#if defined(RCC_ICSCR_HSITRIM_6) +#define RCC_HSICALIBRATION_DEFAULT 0x40U /*!< Default HSI calibration trimming value 64 on devices other than STM32L43x/STM32L44x/STM32L47x/STM32L48x */ +#else +#define RCC_HSICALIBRATION_DEFAULT 0x10U /*!< Default HSI calibration trimming value 16 on STM32L43x/STM32L44x/STM32L47x/STM32L48x devices */ +#endif /* RCC_ICSCR_HSITRIM_6 */ +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF 0x00000000U /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ +/** + * @} + */ +#if defined(RCC_CSR_LSIPREDIV) + +/** @defgroup RCC_LSI_Div LSI Div + * @{ + */ +#define RCC_LSI_DIV1 0x00000000U /*!< LSI clock not divided */ +#define RCC_LSI_DIV128 RCC_CSR_LSIPREDIV /*!< LSI clock divided by 128 */ +/** + * @} + */ +#endif /* RCC_CSR_LSIPREDIV */ + +/** @defgroup RCC_MSI_Config MSI Config + * @{ + */ +#define RCC_MSI_OFF 0x00000000U /*!< MSI clock deactivation */ +#define RCC_MSI_ON RCC_CR_MSION /*!< MSI clock activation */ + +#define RCC_MSICALIBRATION_DEFAULT 0U /*!< Default MSI calibration trimming value */ +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_HSI48_Config HSI48 Config + * @{ + */ +#define RCC_HSI48_OFF 0x00000000U /*!< HSI48 clock deactivation */ +#define RCC_HSI48_ON RCC_CRRCR_HSI48ON /*!< HSI48 clock activation */ +/** + * @} + */ +#else +/** @defgroup RCC_HSI48_Config HSI48 Config + * @{ + */ +#define RCC_HSI48_OFF 0x00000000U /*!< HSI48 clock deactivation */ +/** + * @} + */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_PLL_Config PLL Config + * @{ + */ +#define RCC_PLL_NONE 0x00000000U /*!< PLL configuration unchanged */ +#define RCC_PLL_OFF 0x00000001U /*!< PLL deactivation */ +#define RCC_PLL_ON 0x00000002U /*!< PLL activation */ +/** + * @} + */ + +#if defined(RCC_PLLP_SUPPORT) +/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider + * @{ + */ +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) +#define RCC_PLLP_DIV2 0x00000002U /*!< PLLP division factor = 2 */ +#define RCC_PLLP_DIV3 0x00000003U /*!< PLLP division factor = 3 */ +#define RCC_PLLP_DIV4 0x00000004U /*!< PLLP division factor = 4 */ +#define RCC_PLLP_DIV5 0x00000005U /*!< PLLP division factor = 5 */ +#define RCC_PLLP_DIV6 0x00000006U /*!< PLLP division factor = 6 */ +#define RCC_PLLP_DIV7 0x00000007U /*!< PLLP division factor = 7 */ +#define RCC_PLLP_DIV8 0x00000008U /*!< PLLP division factor = 8 */ +#define RCC_PLLP_DIV9 0x00000009U /*!< PLLP division factor = 9 */ +#define RCC_PLLP_DIV10 0x0000000AU /*!< PLLP division factor = 10 */ +#define RCC_PLLP_DIV11 0x0000000BU /*!< PLLP division factor = 11 */ +#define RCC_PLLP_DIV12 0x0000000CU /*!< PLLP division factor = 12 */ +#define RCC_PLLP_DIV13 0x0000000DU /*!< PLLP division factor = 13 */ +#define RCC_PLLP_DIV14 0x0000000EU /*!< PLLP division factor = 14 */ +#define RCC_PLLP_DIV15 0x0000000FU /*!< PLLP division factor = 15 */ +#define RCC_PLLP_DIV16 0x00000010U /*!< PLLP division factor = 16 */ +#define RCC_PLLP_DIV17 0x00000011U /*!< PLLP division factor = 17 */ +#define RCC_PLLP_DIV18 0x00000012U /*!< PLLP division factor = 18 */ +#define RCC_PLLP_DIV19 0x00000013U /*!< PLLP division factor = 19 */ +#define RCC_PLLP_DIV20 0x00000014U /*!< PLLP division factor = 20 */ +#define RCC_PLLP_DIV21 0x00000015U /*!< PLLP division factor = 21 */ +#define RCC_PLLP_DIV22 0x00000016U /*!< PLLP division factor = 22 */ +#define RCC_PLLP_DIV23 0x00000017U /*!< PLLP division factor = 23 */ +#define RCC_PLLP_DIV24 0x00000018U /*!< PLLP division factor = 24 */ +#define RCC_PLLP_DIV25 0x00000019U /*!< PLLP division factor = 25 */ +#define RCC_PLLP_DIV26 0x0000001AU /*!< PLLP division factor = 26 */ +#define RCC_PLLP_DIV27 0x0000001BU /*!< PLLP division factor = 27 */ +#define RCC_PLLP_DIV28 0x0000001CU /*!< PLLP division factor = 28 */ +#define RCC_PLLP_DIV29 0x0000001DU /*!< PLLP division factor = 29 */ +#define RCC_PLLP_DIV30 0x0000001EU /*!< PLLP division factor = 30 */ +#define RCC_PLLP_DIV31 0x0000001FU /*!< PLLP division factor = 31 */ +#else +#define RCC_PLLP_DIV7 0x00000007U /*!< PLLP division factor = 7 */ +#define RCC_PLLP_DIV17 0x00000011U /*!< PLLP division factor = 17 */ +#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ +/** + * @} + */ +#endif /* RCC_PLLP_SUPPORT */ + +/** @defgroup RCC_PLLQ_Clock_Divider PLLQ Clock Divider + * @{ + */ +#define RCC_PLLQ_DIV2 0x00000002U /*!< PLLQ division factor = 2 */ +#define RCC_PLLQ_DIV4 0x00000004U /*!< PLLQ division factor = 4 */ +#define RCC_PLLQ_DIV6 0x00000006U /*!< PLLQ division factor = 6 */ +#define RCC_PLLQ_DIV8 0x00000008U /*!< PLLQ division factor = 8 */ +/** + * @} + */ + +/** @defgroup RCC_PLLR_Clock_Divider PLLR Clock Divider + * @{ + */ +#define RCC_PLLR_DIV2 0x00000002U /*!< PLLR division factor = 2 */ +#define RCC_PLLR_DIV4 0x00000004U /*!< PLLR division factor = 4 */ +#define RCC_PLLR_DIV6 0x00000006U /*!< PLLR division factor = 6 */ +#define RCC_PLLR_DIV8 0x00000008U /*!< PLLR division factor = 8 */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Source PLL Clock Source + * @{ + */ +#define RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_MSI RCC_PLLCFGR_PLLSRC_MSI /*!< MSI clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI clock selected as PLL entry clock source */ +#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ +/** + * @} + */ + +/** @defgroup RCC_PLL_Clock_Output PLL Clock Output + * @{ + */ +#if defined(RCC_PLLSAI2_SUPPORT) +#define RCC_PLL_SAI3CLK RCC_PLLCFGR_PLLPEN /*!< PLLSAI3CLK selection from main PLL (for devices with PLLSAI2) */ +#elif defined(RCC_PLLSAI1_SUPPORT) +#define RCC_PLL_SAI2CLK RCC_PLLCFGR_PLLPEN /*!< PLLSAI2CLK selection from main PLL (for devices without PLLSAI2) */ +#endif /* RCC_PLLSAI2_SUPPORT */ +#define RCC_PLL_48M1CLK RCC_PLLCFGR_PLLQEN /*!< PLL48M1CLK selection from main PLL */ +#define RCC_PLL_SYSCLK RCC_PLLCFGR_PLLREN /*!< PLLCLK selection from main PLL */ +/** + * @} + */ +#if defined(RCC_PLLSAI1_SUPPORT) + +/** @defgroup RCC_PLLSAI1_Clock_Output PLLSAI1 Clock Output + * @{ + */ +#define RCC_PLLSAI1_SAI1CLK RCC_PLLSAI1CFGR_PLLSAI1PEN /*!< PLLSAI1CLK selection from PLLSAI1 */ +#define RCC_PLLSAI1_48M2CLK RCC_PLLSAI1CFGR_PLLSAI1QEN /*!< PLL48M2CLK selection from PLLSAI1 */ +#define RCC_PLLSAI1_ADC1CLK RCC_PLLSAI1CFGR_PLLSAI1REN /*!< PLLADC1CLK selection from PLLSAI1 */ +/** + * @} + */ +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +/** @defgroup RCC_PLLSAI2_Clock_Output PLLSAI2 Clock Output + * @{ + */ +#define RCC_PLLSAI2_SAI2CLK RCC_PLLSAI2CFGR_PLLSAI2PEN /*!< PLLSAI2CLK selection from PLLSAI2 */ +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) +#define RCC_PLLSAI2_DSICLK RCC_PLLSAI2CFGR_PLLSAI2QEN /*!< PLLDSICLK selection from PLLSAI2 */ +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) +#define RCC_PLLSAI2_ADC2CLK RCC_PLLSAI2CFGR_PLLSAI2REN /*!< PLLADC2CLK selection from PLLSAI2 */ +#else +#define RCC_PLLSAI2_LTDCCLK RCC_PLLSAI2CFGR_PLLSAI2REN /*!< PLLLTDCCLK selection from PLLSAI2 */ +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ +/** + * @} + */ + +#endif /* RCC_PLLSAI2_SUPPORT */ + +/** @defgroup RCC_MSI_Clock_Range MSI Clock Range + * @{ + */ +#define RCC_MSIRANGE_0 RCC_CR_MSIRANGE_0 /*!< MSI = 100 KHz */ +#define RCC_MSIRANGE_1 RCC_CR_MSIRANGE_1 /*!< MSI = 200 KHz */ +#define RCC_MSIRANGE_2 RCC_CR_MSIRANGE_2 /*!< MSI = 400 KHz */ +#define RCC_MSIRANGE_3 RCC_CR_MSIRANGE_3 /*!< MSI = 800 KHz */ +#define RCC_MSIRANGE_4 RCC_CR_MSIRANGE_4 /*!< MSI = 1 MHz */ +#define RCC_MSIRANGE_5 RCC_CR_MSIRANGE_5 /*!< MSI = 2 MHz */ +#define RCC_MSIRANGE_6 RCC_CR_MSIRANGE_6 /*!< MSI = 4 MHz */ +#define RCC_MSIRANGE_7 RCC_CR_MSIRANGE_7 /*!< MSI = 8 MHz */ +#define RCC_MSIRANGE_8 RCC_CR_MSIRANGE_8 /*!< MSI = 16 MHz */ +#define RCC_MSIRANGE_9 RCC_CR_MSIRANGE_9 /*!< MSI = 24 MHz */ +#define RCC_MSIRANGE_10 RCC_CR_MSIRANGE_10 /*!< MSI = 32 MHz */ +#define RCC_MSIRANGE_11 RCC_CR_MSIRANGE_11 /*!< MSI = 48 MHz */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Type System Clock Type + * @{ + */ +#define RCC_CLOCKTYPE_SYSCLK 0x00000001U /*!< SYSCLK to configure */ +#define RCC_CLOCKTYPE_HCLK 0x00000002U /*!< HCLK to configure */ +#define RCC_CLOCKTYPE_PCLK1 0x00000004U /*!< PCLK1 to configure */ +#define RCC_CLOCKTYPE_PCLK2 0x00000008U /*!< PCLK2 to configure */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_MSI RCC_CFGR_SW_MSI /*!< MSI selection as system clock */ +#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */ +#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */ +#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selection as system clock */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status + * @{ + */ +#define RCC_SYSCLKSOURCE_STATUS_MSI RCC_CFGR_SWS_MSI /*!< MSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_AHB_Clock_Source AHB Clock Source + * @{ + */ +#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ +#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ +#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ +#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ +#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ +#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ +#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ +#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ +#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_APB1_APB2_Clock_Source APB1 APB2 Clock Source + * @{ + */ +#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ +#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ +#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ +#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ +#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Source RTC Clock Source + * @{ + */ +#define RCC_RTCCLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ +#define RCC_MCO1 0x00000000U +#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ +/** + * @} + */ + +/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source + * @{ + */ +#define RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO1 output disabled, no clock on MCO1 */ +#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_MSI RCC_CFGR_MCOSEL_1 /*!< MSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */ +#define RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< PLLCLK selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */ +#define RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_3 /*!< HSI48 selection as MCO1 source (STM32L43x/STM32L44x devices) */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_MCOx_Clock_Prescaler MCO1 Clock Prescaler + * @{ + */ +#define RCC_MCODIV_1 RCC_CFGR_MCOPRE_DIV1 /*!< MCO not divided */ +#define RCC_MCODIV_2 RCC_CFGR_MCOPRE_DIV2 /*!< MCO divided by 2 */ +#define RCC_MCODIV_4 RCC_CFGR_MCOPRE_DIV4 /*!< MCO divided by 4 */ +#define RCC_MCODIV_8 RCC_CFGR_MCOPRE_DIV8 /*!< MCO divided by 8 */ +#define RCC_MCODIV_16 RCC_CFGR_MCOPRE_DIV16 /*!< MCO divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define RCC_IT_LSERDY RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define RCC_IT_MSIRDY RCC_CIFR_MSIRDYF /*!< MSI Ready Interrupt flag */ +#define RCC_IT_HSIRDY RCC_CIFR_HSIRDYF /*!< HSI16 Ready Interrupt flag */ +#define RCC_IT_HSERDY RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define RCC_IT_PLLRDY RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#if defined(RCC_PLLSAI1_SUPPORT) +#define RCC_IT_PLLSAI1RDY RCC_CIFR_PLLSAI1RDYF /*!< PLLSAI1 Ready Interrupt flag */ +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(RCC_PLLSAI2_SUPPORT) +#define RCC_IT_PLLSAI2RDY RCC_CIFR_PLLSAI2RDYF /*!< PLLSAI2 Ready Interrupt flag */ +#endif /* RCC_PLLSAI2_SUPPORT */ +#define RCC_IT_CSS RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */ +#define RCC_IT_LSECSS RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_IT_HSI48RDY RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_Flag Flags + * Elements values convention: XXXYYYYYb + * - YYYYY : Flag position in the register + * - XXX : Register index + * - 001: CR register + * - 010: BDCR register + * - 011: CSR register + * - 100: CRRCR register + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_MSIRDY ((CR_REG_INDEX << 5U) | RCC_CR_MSIRDY_Pos) /*!< MSI Ready flag */ +#define RCC_FLAG_HSIRDY ((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_Pos) /*!< HSI Ready flag */ +#define RCC_FLAG_HSERDY ((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_Pos) /*!< HSE Ready flag */ +#define RCC_FLAG_PLLRDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_Pos) /*!< PLL Ready flag */ +#if defined(RCC_PLLSAI1_SUPPORT) +#define RCC_FLAG_PLLSAI1RDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLSAI1RDY_Pos) /*!< PLLSAI1 Ready flag */ +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(RCC_PLLSAI2_SUPPORT) +#define RCC_FLAG_PLLSAI2RDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLSAI2RDY_Pos) /*!< PLLSAI2 Ready flag */ +#endif /* RCC_PLLSAI2_SUPPORT */ + +/* Flags in the BDCR register */ +#define RCC_FLAG_LSERDY ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_Pos) /*!< LSE Ready flag */ +#define RCC_FLAG_LSECSSD ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSECSSD_Pos) /*!< LSE Clock Security System Interrupt flag */ + +/* Flags in the CSR register */ +#define RCC_FLAG_LSIRDY ((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_Pos) /*!< LSI Ready flag */ +#define RCC_FLAG_FWRST ((CSR_REG_INDEX << 5U) | RCC_CSR_FWRSTF_Pos) /*!< Firewall reset flag */ +#define RCC_FLAG_OBLRST ((CSR_REG_INDEX << 5U) | RCC_CSR_OBLRSTF_Pos) /*!< Option Byte Loader reset flag */ +#define RCC_FLAG_PINRST ((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_Pos) /*!< PIN reset flag */ +#define RCC_FLAG_BORRST ((CSR_REG_INDEX << 5U) | RCC_CSR_BORRSTF_Pos) /*!< BOR reset flag */ +#define RCC_FLAG_SFTRST ((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_Pos) /*!< Software Reset flag */ +#define RCC_FLAG_IWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_Pos) /*!< Independent Watchdog reset flag */ +#define RCC_FLAG_WWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_Pos) /*!< Window watchdog reset flag */ +#define RCC_FLAG_LPWRRST ((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_Pos) /*!< Low-Power reset flag */ + +#if defined(RCC_HSI48_SUPPORT) +/* Flags in the CRRCR register */ +#define RCC_FLAG_HSI48RDY ((CRRCR_REG_INDEX << 5U) | RCC_CRRCR_HSI48RDY_Pos) /*!< HSI48 Ready flag */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LSEDrive_Config LSE Drive Config + * @{ + */ +#define RCC_LSEDRIVE_LOW 0x00000000U /*!< LSE low drive capability */ +#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< LSE medium low drive capability */ +#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< LSE medium high drive capability */ +#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< LSE high drive capability */ +/** + * @} + */ + +/** @defgroup RCC_Stop_WakeUpClock Wake-Up from STOP Clock + * @{ + */ +#define RCC_STOP_WAKEUPCLOCK_MSI 0x00000000U /*!< MSI selection after wake-up from STOP */ +#define RCC_STOP_WAKEUPCLOCK_HSI RCC_CFGR_STOPWUCK /*!< HSI selection after wake-up from STOP */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TSC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* GFXMMU */ + + +#define __HAL_RCC_DMA1_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN) + +#define __HAL_RCC_DMA2_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN) + +#define __HAL_RCC_CRC_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN) + +#define __HAL_RCC_TSC_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_DISABLE() CLEAR_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN) +#endif /* GFXMMU */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Peripheral_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* GPIOI */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* HASH */ + +#define __HAL_RCC_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SDMMC2 */ + + +#define __HAL_RCC_GPIOA_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN) + +#define __HAL_RCC_GPIOB_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN) + +#define __HAL_RCC_GPIOC_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN) +#endif /* GPIOI */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN); +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN); +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN) +#endif /* HASH */ + +#define __HAL_RCC_RNG_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN) +#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_CLK_DISABLE() CLEAR_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN) +#endif /* SDMMC2 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Enable_Disable AHB3 Peripheral Clock Enable Disable + * @brief Enable or disable the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* OCTOSPI2 */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_DISABLE() CLEAR_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN) +#endif /* OCTOSPI2 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* LCD */ + +#if defined(RCC_APB1ENR1_RTCAPBEN) +#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* RCC_APB1ENR1_RTCAPBEN */ + +#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(USART3) +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* USB */ + +#define __HAL_RCC_PWR_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPUART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN); \ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_TIM2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN); +#endif /* LCD */ + +#if defined(RCC_APB1ENR1_RTCAPBEN) +#define __HAL_RCC_RTCAPB_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN); +#endif /* RCC_APB1ENR1_RTCAPBEN */ + +#if defined(SPI2) +#define __HAL_RCC_SPI2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN) + +#if defined(USART3) +#define __HAL_RCC_USART3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN); +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN); +#endif /* USB */ + +#define __HAL_RCC_PWR_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN) + +#define __HAL_RCC_LPTIM1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN) + +#define __HAL_RCC_LPUART1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_FIREWALL_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_FWEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_FWEN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */ + +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN); \ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN); \ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN); \ + UNUSED(tmpreg); \ + } while(0) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN); \ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN); \ + UNUSED(tmpreg); \ + } while(0) +#endif /* DSI */ + + +#define __HAL_RCC_SYSCFG_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN) + +#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN) +#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */ + +#define __HAL_RCC_TIM1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN) + +#define __HAL_RCC_SPI1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) + +#define __HAL_RCC_TIM15_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN) + +#define __HAL_RCC_TIM16_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN) +#endif /* DSI */ + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN) != 0U) + +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN) != 0U) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN) != 0U) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN) != 0U) + +#define __HAL_RCC_CRC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN) != 0U) + +#define __HAL_RCC_TSC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN) != 0U) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN) != 0U) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_ENABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN) != 0U) +#endif /* GFXMMU */ + + +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN) == 0U) + +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN) == 0U) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMAMUX1EN) == 0U) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_FLASHEN) == 0U) + +#define __HAL_RCC_CRC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN) == 0U) + +#define __HAL_RCC_TSC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_TSCEN) == 0U) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN) == 0U) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_DISABLED() (READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GFXMMUEN) == 0U) +#endif /* GFXMMU */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Clock_Enable_Disable_Status AHB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN) != 0U) + +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN) != 0U) + +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN) != 0U) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN) != 0U) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN) != 0U) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN) != 0U) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN) != 0U) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN) != 0U) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN) != 0U) +#endif /* GPIOI */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN) != 0U) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN) != 0U) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN) != 0U) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN) != 0U) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN) != 0U) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN) != 0U) +#endif /* HASH */ + +#define __HAL_RCC_RNG_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN) != 0U) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN) != 0U) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN) != 0U) +#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_IS_CLK_ENABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN) != 0U) +#endif /* SDMMC2 */ + + +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOAEN) == 0U) + +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOBEN) == 0U) + +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOCEN) == 0U) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIODEN) == 0U) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOEEN) == 0U) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOFEN) == 0U) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOGEN) == 0U) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOHEN) == 0U) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_GPIOIEN) == 0U) +#endif /* GPIOI */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN) == 0U) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN) == 0U) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN) == 0U) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_PKAEN) == 0U) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AESEN) == 0U) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN) == 0U) +#endif /* HASH */ + +#define __HAL_RCC_RNG_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN) == 0U) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OSPIMEN) == 0U) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC1EN) == 0U) +#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_IS_CLK_DISABLED() (READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN) == 0U) +#endif /* SDMMC2 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Enable_Disable_Status AHB3 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB3 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN) != 0U) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN) != 0U) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN) != 0U) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_ENABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN) != 0U) +#endif /* OCTOSPI2 */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN) == 0U) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN) == 0U) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN) == 0U) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_DISABLED() (READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN) == 0U) +#endif /* OCTOSPI2 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN) != 0U) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN) != 0U) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN) != 0U) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN) != 0U) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN) != 0U) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN) != 0U) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN) != 0U) +#endif /* LCD */ + +#if defined(RCC_APB1ENR1_RTCAPBEN) +#define __HAL_RCC_RTCAPB_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN) != 0U) +#endif /* RCC_APB1ENR1_RTCAPBEN */ + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN) != 0U) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN) != 0U) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN) != 0U) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN) != 0U) + +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN) != 0U) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN) != 0U) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN) != 0U) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN) != 0U) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN) != 0U) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN) != 0U) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN) != 0U) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN) != 0U) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN) != 0U) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN) != 0U) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN) != 0U) +#endif /* USB */ + +#define __HAL_RCC_PWR_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN) != 0U) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN) != 0U) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN) != 0U) + +#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN) != 0U) + +#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN) != 0U) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN) != 0U) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN) != 0U) + + +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM2EN) == 0U) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM3EN) == 0U) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM4EN) == 0U) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM5EN) == 0U) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM6EN) == 0U) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_TIM7EN) == 0U) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LCDEN) == 0U) +#endif /* LCD */ + +#if defined(RCC_APB1ENR1_RTCAPBEN) +#define __HAL_RCC_RTCAPB_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_RTCAPBEN) == 0U) +#endif /* RCC_APB1ENR1_RTCAPBEN */ + +#define __HAL_RCC_WWDG_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_WWDGEN) == 0U) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI2EN) == 0U) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_SPI3EN) == 0U) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART2EN) == 0U) + +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USART3EN) == 0U) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART4EN) == 0U) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_UART5EN) == 0U) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C1EN) == 0U) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C2EN) == 0U) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_I2C3EN) == 0U) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_I2C4EN) == 0U) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CRSEN) == 0U) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN1EN) == 0U) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_CAN2EN) == 0U) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_USBFSEN) == 0U) +#endif /* USB */ + +#define __HAL_RCC_PWR_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_PWREN) == 0U) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_DAC1EN) == 0U) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_OPAMPEN) == 0U) + +#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR1, RCC_APB1ENR1_LPTIM1EN) == 0U) + +#define __HAL_RCC_LPUART1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPUART1EN) == 0U) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_SWPMI1EN) == 0U) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_IS_CLK_DISABLED() (READ_BIT(RCC->APB1ENR2, RCC_APB1ENR2_LPTIM2EN) == 0U) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN) != 0U) + +#define __HAL_RCC_FIREWALL_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_FWEN) != 0U) + +#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN) != 0U) +#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */ + +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN) != 0U) + +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) != 0U) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN) != 0U) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) != 0U) + +#define __HAL_RCC_TIM15_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN) != 0U) + +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN) != 0U) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN) != 0U) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN) != 0U) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN) != 0U) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN) != 0U) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN) != 0U) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN) != 0U) +#endif /* DSI */ + + +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN) == 0U) + +#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN) +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN) == 0U) +#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */ + +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN) == 0U) + +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN) == 0U) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN) == 0U) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN) == 0U) + +#define __HAL_RCC_TIM15_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN) == 0U) + +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN) == 0U) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN) == 0U) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN) == 0U) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN) == 0U) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN) == 0U) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN) == 0U) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_DISABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DSIEN) == 0U) +#endif /* DSI */ + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Peripheral Force Release Reset + * @brief Force or release AHB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB1_FORCE_RESET() WRITE_REG(RCC->AHB1RSTR, 0xFFFFFFFFUL) + +#define __HAL_RCC_DMA1_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA1RST) + +#define __HAL_RCC_DMA2_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA2RST) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMAMUX1RST) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_FLASHRST) + +#define __HAL_RCC_CRC_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_CRCRST) + +#define __HAL_RCC_TSC_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_TSCRST) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA2DRST) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_FORCE_RESET() SET_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_GFXMMURST) +#endif /* GFXMMU */ + + +#define __HAL_RCC_AHB1_RELEASE_RESET() WRITE_REG(RCC->AHB1RSTR, 0x00000000UL) + +#define __HAL_RCC_DMA1_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA1RST) + +#define __HAL_RCC_DMA2_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA2RST) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMAMUX1RST) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_FLASHRST) + +#define __HAL_RCC_CRC_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_CRCRST) + +#define __HAL_RCC_TSC_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_TSCRST) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_DMA2DRST) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_RELEASE_RESET() CLEAR_BIT(RCC->AHB1RSTR, RCC_AHB1RSTR_GFXMMURST) +#endif /* GFXMMU */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Force_Release_Reset AHB2 Peripheral Force Release Reset + * @brief Force or release AHB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB2_FORCE_RESET() WRITE_REG(RCC->AHB2RSTR, 0xFFFFFFFFUL) + +#define __HAL_RCC_GPIOA_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOARST) + +#define __HAL_RCC_GPIOB_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOBRST) + +#define __HAL_RCC_GPIOC_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOCRST) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIODRST) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOERST) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOFRST) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOGRST) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOHRST) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOIRST) +#endif /* GPIOI */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OTGFSRST) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_ADCRST) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_DCMIRST) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_PKARST) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_AESRST) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_HASHRST) +#endif /* HASH */ + +#define __HAL_RCC_RNG_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_RNGRST) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OSPIMRST) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2RSTR_SDMMC1RST) +#define __HAL_RCC_SDMMC1_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC1RST) +#endif /* SDMMC1 && RCC_AHB2RSTR_SDMMC1RST */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_FORCE_RESET() SET_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC2RST) +#endif /* SDMMC2 */ + + +#define __HAL_RCC_AHB2_RELEASE_RESET() WRITE_REG(RCC->AHB2RSTR, 0x00000000UL) + +#define __HAL_RCC_GPIOA_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOARST) + +#define __HAL_RCC_GPIOB_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOBRST) + +#define __HAL_RCC_GPIOC_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOCRST) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIODRST) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOERST) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOFRST) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOGRST) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOHRST) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_GPIOIRST) +#endif /* GPIOI */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OTGFSRST) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_ADCRST) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_DCMIRST) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_PKARST) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_AESRST) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_HASHRST) +#endif /* HASH */ + +#define __HAL_RCC_RNG_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_RNGRST) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_OSPIMRST) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2RSTR_SDMMC1RST) +#define __HAL_RCC_SDMMC1_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC1RST) +#endif /* SDMMC1 && RCC_AHB2RSTR_SDMMC1RST */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_RELEASE_RESET() CLEAR_BIT(RCC->AHB2RSTR, RCC_AHB2RSTR_SDMMC2RST) +#endif /* SDMMC2 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Force_Release_Reset AHB3 Peripheral Force Release Reset + * @brief Force or release AHB3 peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB3_FORCE_RESET() WRITE_REG(RCC->AHB3RSTR, 0xFFFFFFFFUL) + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_FMCRST) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_QSPIRST) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_OSPI1RST) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_FORCE_RESET() SET_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_OSPI2RST) +#endif /* OCTOSPI2 */ + +#define __HAL_RCC_AHB3_RELEASE_RESET() WRITE_REG(RCC->AHB3RSTR, 0x00000000UL) + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_FMCRST) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_QSPIRST) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_OSPI1RST) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_RELEASE_RESET() CLEAR_BIT(RCC->AHB3RSTR, RCC_AHB3RSTR_OSPI2RST) +#endif /* OCTOSPI2 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset APB1 Peripheral Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() do { \ + WRITE_REG(RCC->APB1RSTR1, 0xFFFFFFFFUL); \ + WRITE_REG(RCC->APB1RSTR2, 0xFFFFFFFFUL); \ + } while(0) + +#define __HAL_RCC_TIM2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM2RST) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM3RST) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM4RST) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM5RST) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM6RST) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM7RST) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LCDRST) +#endif /* LCD */ + +#if defined(SPI2) +#define __HAL_RCC_SPI2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI2RST) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI3RST) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART2RST) + +#if defined(USART3) +#define __HAL_RCC_USART3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART3RST) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART4RST) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART5RST) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C1RST) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C2RST) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C3RST) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_I2C4RST) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CRSRST) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN1RST) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN2RST) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USBFSRST) +#endif /* USB */ + +#define __HAL_RCC_PWR_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_PWRRST) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_DAC1RST) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_OPAMPRST) + +#define __HAL_RCC_LPTIM1_FORCE_RESET() SET_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LPTIM1RST) + +#define __HAL_RCC_LPUART1_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_LPUART1RST) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_SWPMI1RST) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_FORCE_RESET() SET_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_LPTIM2RST) + + +#define __HAL_RCC_APB1_RELEASE_RESET() do { \ + WRITE_REG(RCC->APB1RSTR1, 0x00000000UL); \ + WRITE_REG(RCC->APB1RSTR2, 0x00000000UL); \ + } while(0) + +#define __HAL_RCC_TIM2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM2RST) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM3RST) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM4RST) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM5RST) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM6RST) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_TIM7RST) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LCDRST) +#endif /* LCD */ + +#if defined(SPI2) +#define __HAL_RCC_SPI2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI2RST) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_SPI3RST) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART2RST) + +#if defined(USART3) +#define __HAL_RCC_USART3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USART3RST) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART4RST) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_UART5RST) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C1RST) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C2RST) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_I2C3RST) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_I2C4RST) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CRSRST) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN1RST) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_CAN2RST) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_USBFSRST) +#endif /* USB */ + +#define __HAL_RCC_PWR_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_PWRRST) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_DAC1RST) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_OPAMPRST) + +#define __HAL_RCC_LPTIM1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR1, RCC_APB1RSTR1_LPTIM1RST) + +#define __HAL_RCC_LPUART1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_LPUART1RST) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_SWPMI1RST) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR2, RCC_APB1RSTR2_LPTIM2RST) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Force_Release_Reset APB2 Peripheral Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() WRITE_REG(RCC->APB2RSTR, 0xFFFFFFFFUL) + +#define __HAL_RCC_SYSCFG_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SYSCFGRST) + +#if defined(SDMMC1) && defined(RCC_APB2RSTR_SDMMC1RST) +#define __HAL_RCC_SDMMC1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SDMMC1RST) +#endif /* SDMMC1 && RCC_APB2RSTR_SDMMC1RST */ + +#define __HAL_RCC_TIM1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM1RST) + +#define __HAL_RCC_SPI1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI1RST) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM8RST) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_USART1RST) + +#define __HAL_RCC_TIM15_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM15RST) + +#define __HAL_RCC_TIM16_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM16RST) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM17RST) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI1RST) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI2RST) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DFSDM1RST) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_LTDCRST) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_FORCE_RESET() SET_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DSIRST) +#endif /* DSI */ + + +#define __HAL_RCC_APB2_RELEASE_RESET() WRITE_REG(RCC->APB2RSTR, 0x00000000UL) + +#define __HAL_RCC_SYSCFG_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SYSCFGRST) + +#if defined(SDMMC1) && defined(RCC_APB2RSTR_SDMMC1RST) +#define __HAL_RCC_SDMMC1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SDMMC1RST) +#endif /* SDMMC1 && RCC_APB2RSTR_SDMMC1RST */ + +#define __HAL_RCC_TIM1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM1RST) + +#define __HAL_RCC_SPI1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SPI1RST) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM8RST) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_USART1RST) + +#define __HAL_RCC_TIM15_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM15RST) + +#define __HAL_RCC_TIM16_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM16RST) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_TIM17RST) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI1RST) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_SAI2RST) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DFSDM1RST) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_LTDCRST) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, RCC_APB2RSTR_DSIRST) +#endif /* DSI */ + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable AHB1 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) + +#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_FLASHSMEN) + +#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) + +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) + +#define __HAL_RCC_TSC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2DSMEN) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_GFXMMUSMEN) +#endif /* GFXMMU */ + + +#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) + +#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_FLASHSMEN) + +#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) + +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) + +#define __HAL_RCC_TSC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2DSMEN) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_GFXMMUSMEN) +#endif /* GFXMMU */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Clock_Sleep_Enable_Disable AHB2 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) + +#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) + +#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOISMEN) +#endif /* GPIOI */ + +#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) + +#if defined(SRAM3) +#define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM3SMEN) +#endif /* SRAM3 */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_DCMISMEN) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_PKASMEN) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_HASHSMEN) +#endif /* HASH */ + +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OSPIMSMEN) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC1SMEN) +#endif /* SDMMC1 && RCC_AHB2SMENR_SDMMC1SMEN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC2SMEN) +#endif /* SDMMC2 */ + + +#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) + +#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) + +#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOISMEN) +#endif /* GPIOI */ + +#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) + +#if defined(SRAM3) +#define __HAL_RCC_SRAM3_IS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM3SMEN) +#endif /* SRAM3 */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_DCMISMEN) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_PKASMEN) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_HASHSMEN) +#endif /* HASH */ + +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OSPIMSMEN) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC1SMEN) +#endif /* SDMMC1 && RCC_AHB2SMENR_SDMMC1SMEN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC2SMEN) +#endif /* SDMMC2 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Sleep_Enable_Disable AHB3 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI1SMEN) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI2SMEN) +#endif /* OCTOSPI2 */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) +#endif /* FMC_BANK1 */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI1SMEN) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI2SMEN) +#endif /* OCTOSPI2 */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) +#endif /* FMC_BANK1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable APB1 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) +#endif /* LCD */ + +#if defined(RCC_APB1SMENR1_RTCAPBSMEN) +#define __HAL_RCC_RTCAPB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) +#endif /* RCC_APB1SMENR1_RTCAPBSMEN */ + +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) + +#if defined(USART3) +#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_I2C4SMEN) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN2SMEN) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) +#endif /* USB */ + +#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_OPAMPSMEN) + +#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) + +#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_SWPMI1SMEN) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) + + +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) +#endif /* LCD */ + +#if defined(RCC_APB1SMENR1_RTCAPBSMEN) +#define __HAL_RCC_RTCAPB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) +#endif /* RCC_APB1SMENR1_RTCAPBSMEN */ + +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) + +#if defined(USART3) +#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_I2C4SMEN) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN2SMEN) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) +#endif /* USB */ + +#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_OPAMPSMEN) + +#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) + +#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_SWPMI1SMEN) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable APB2 Peripheral Clock Sleep Enable Disable + * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) + +#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) +#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */ + +#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) + +#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) + +#define __HAL_RCC_TIM15_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM15SMEN) + +#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_LTDCSMEN) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DSISMEN) +#endif /* DSI */ + + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) + +#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) +#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */ + +#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) + +#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) + +#define __HAL_RCC_TIM15_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM15SMEN) + +#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_LTDCSMEN) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DSISMEN) +#endif /* DSI */ + +/** + * @} + */ + +/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable_Status AHB1 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB1 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) != 0U) + +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) != 0U) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) != 0U) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_FLASHSMEN) != 0U) + +#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) != 0U) + +#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) != 0U) + +#define __HAL_RCC_TSC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) != 0U) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2DSMEN) != 0U) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_GFXMMUSMEN) != 0U) +#endif /* GFXMMU */ + + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA1SMEN) == 0U) + +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2SMEN) == 0U) + +#if defined(DMAMUX1) +#define __HAL_RCC_DMAMUX1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMAMUX1SMEN) == 0U) +#endif /* DMAMUX1 */ + +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_FLASHSMEN) == 0U) + +#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_SRAM1SMEN) == 0U) + +#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_CRCSMEN) == 0U) + +#define __HAL_RCC_TSC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_TSCSMEN) == 0U) + +#if defined(DMA2D) +#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_DMA2DSMEN) == 0U) +#endif /* DMA2D */ + +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB1SMENR, RCC_AHB1SMENR_GFXMMUSMEN) == 0U) +#endif /* GFXMMU */ + +/** + * @} + */ + +/** @defgroup RCC_AHB2_Clock_Sleep_Enable_Disable_Status AHB2 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB2 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) != 0U) + +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) != 0U) + +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) != 0U) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) != 0U) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) != 0U) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) != 0U) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) != 0U) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) != 0U) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOISMEN) != 0U) +#endif /* GPIOI */ + +#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) != 0U) + +#if defined(SRAM3) +#define __HAL_RCC_SRAM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM3SMEN) != 0U) +#endif /* SRAM3 */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) != 0U) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) != 0U) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_DCMISMEN) != 0U) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_PKASMEN) != 0U) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) != 0U) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_HASHSMEN) != 0U) +#endif /* HASH */ + +#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) != 0U) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OSPIMSMEN) != 0U) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC1SMEN) != 0U) +#endif /* SDMMC1 && RCC_AHB2SMENR_SDMMC1SMEN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC2SMEN) != 0U) +#endif /* SDMMC2 */ + + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOASMEN) == 0U) + +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOBSMEN) == 0U) + +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOCSMEN) == 0U) + +#if defined(GPIOD) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIODSMEN) == 0U) +#endif /* GPIOD */ + +#if defined(GPIOE) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOESMEN) == 0U) +#endif /* GPIOE */ + +#if defined(GPIOF) +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOFSMEN) == 0U) +#endif /* GPIOF */ + +#if defined(GPIOG) +#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOGSMEN) == 0U) +#endif /* GPIOG */ + +#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOHSMEN) == 0U) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_GPIOISMEN) == 0U) +#endif /* GPIOI */ + +#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM2SMEN) == 0U) + +#if defined(SRAM3) +#define __HAL_RCC_SRAM3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SRAM3SMEN) == 0U) +#endif /* SRAM3 */ + +#if defined(USB_OTG_FS) +#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OTGFSSMEN) == 0U) +#endif /* USB_OTG_FS */ + +#define __HAL_RCC_ADC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_ADCSMEN) == 0U) + +#if defined(DCMI) +#define __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_DCMISMEN) == 0U) +#endif /* DCMI */ + +#if defined(PKA) +#define __HAL_RCC_PKA_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_PKASMEN) == 0U) +#endif /* PKA */ + +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_AESSMEN) == 0U) +#endif /* AES */ + +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_HASHSMEN) == 0U) +#endif /* HASH */ + +#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_RNGSMEN) == 0U) + +#if defined(OCTOSPIM) +#define __HAL_RCC_OSPIM_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_OSPIMSMEN) == 0U) +#endif /* OCTOSPIM */ + +#if defined(SDMMC1) && defined(RCC_AHB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC1SMEN) == 0U) +#endif /* SDMMC1 && RCC_AHB2SMENR_SDMMC1SMEN */ + +#if defined(SDMMC2) +#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB2SMENR, RCC_AHB2SMENR_SDMMC2SMEN) == 0U) +#endif /* SDMMC2 */ + +/** + * @} + */ + +/** @defgroup RCC_AHB3_Clock_Sleep_Enable_Disable_Status AHB3 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the AHB3 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) != 0U) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI1SMEN) != 0U) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI2SMEN) != 0U) +#endif /* OCTOSPI2 */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) != 0U) +#endif /* FMC_BANK1 */ + + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_QSPISMEN) == 0U) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI1SMEN) == 0U) +#endif /* OCTOSPI1 */ + +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_OSPI2SMEN) == 0U) +#endif /* OCTOSPI2 */ + +#if defined(FMC_BANK1) +#define __HAL_RCC_FMC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->AHB3SMENR, RCC_AHB3SMENR_FMCSMEN) == 0U) +#endif /* FMC_BANK1 */ + +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable_Status APB1 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) != 0U) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) != 0U) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) != 0U) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) != 0U) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) != 0U) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) != 0U) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) != 0U) +#endif /* LCD */ + +#if defined(RCC_APB1SMENR1_RTCAPBSMEN) +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) != 0U) +#endif /* RCC_APB1SMENR1_RTCAPBSMEN */ + +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) != 0U) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) != 0U) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) != 0U) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) != 0U) + +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) != 0U) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) != 0U) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) != 0U) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) != 0U) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) != 0U) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) != 0U) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_I2C4SMEN) != 0U) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) != 0U) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) != 0U) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN2SMEN) != 0U) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) != 0U) +#endif /* USB */ + +#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) != 0U) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) != 0U) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_OPAMPSMEN) != 0U) + +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) != 0U) + +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) != 0U) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_SWPMI1SMEN) != 0U) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) != 0U) + + +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM2SMEN) == 0U) + +#if defined(TIM3) +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM3SMEN) == 0U) +#endif /* TIM3 */ + +#if defined(TIM4) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM4SMEN) == 0U) +#endif /* TIM4 */ + +#if defined(TIM5) +#define __HAL_RCC_TIM5_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM5SMEN) == 0U) +#endif /* TIM5 */ + +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM6SMEN) == 0U) + +#if defined(TIM7) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_TIM7SMEN) == 0U) +#endif /* TIM7 */ + +#if defined(LCD) +#define __HAL_RCC_LCD_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LCDSMEN) == 0U) +#endif /* LCD */ + +#if defined(RCC_APB1SMENR1_RTCAPBSMEN) +#define __HAL_RCC_RTCAPB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_RTCAPBSMEN) == 0U) +#endif /* RCC_APB1SMENR1_RTCAPBSMEN */ + +#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_WWDGSMEN) == 0U) + +#if defined(SPI2) +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI2SMEN) == 0U) +#endif /* SPI2 */ + +#if defined(SPI3) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_SPI3SMEN) == 0U) +#endif /* SPI3 */ + +#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART2SMEN) == 0U) + +#if defined(USART3) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USART3SMEN) == 0U) +#endif /* USART3 */ + +#if defined(UART4) +#define __HAL_RCC_UART4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART4SMEN) == 0U) +#endif /* UART4 */ + +#if defined(UART5) +#define __HAL_RCC_UART5_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_UART5SMEN) == 0U) +#endif /* UART5 */ + +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C1SMEN) == 0U) + +#if defined(I2C2) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C2SMEN) == 0U) +#endif /* I2C2 */ + +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_I2C3SMEN) == 0U) + +#if defined(I2C4) +#define __HAL_RCC_I2C4_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_I2C4SMEN) == 0U) +#endif /* I2C4 */ + +#if defined(CRS) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CRSSMEN) == 0U) +#endif /* CRS */ + +#if defined(CAN1) +#define __HAL_RCC_CAN1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN1SMEN) == 0U) +#endif /* CAN1 */ + +#if defined(CAN2) +#define __HAL_RCC_CAN2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_CAN2SMEN) == 0U) +#endif /* CAN2 */ + +#if defined(USB) +#define __HAL_RCC_USB_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_USBFSSMEN) == 0U) +#endif /* USB */ + +#define __HAL_RCC_PWR_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_PWRSMEN) == 0U) + +#if defined(DAC1) +#define __HAL_RCC_DAC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_DAC1SMEN) == 0U) +#endif /* DAC1 */ + +#define __HAL_RCC_OPAMP_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_OPAMPSMEN) == 0U) + +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR1, RCC_APB1SMENR1_LPTIM1SMEN) == 0U) + +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPUART1SMEN) == 0U) + +#if defined(SWPMI1) +#define __HAL_RCC_SWPMI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_SWPMI1SMEN) == 0U) +#endif /* SWPMI1 */ + +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB1SMENR2, RCC_APB1SMENR2_LPTIM2SMEN) == 0U) + +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable_Status APB2 Peripheral Clock Sleep Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock during Low Power (Sleep) mode is enabled or not. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + * @{ + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) != 0U) + +#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) != 0U) +#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */ + +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) != 0U) + +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) != 0U) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) != 0U) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) != 0U) + +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM15SMEN) != 0U) + +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) != 0U) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) != 0U) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) != 0U) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) != 0U) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) != 0U) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_LTDCSMEN) != 0U) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DSISMEN) != 0U) +#endif /* DSI */ + + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) == 0U) + +#if defined(SDMMC1) && defined(RCC_APB2SMENR_SDMMC1SMEN) +#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SDMMC1SMEN) == 0U) +#endif /* SDMMC1 && RCC_APB2SMENR_SDMMC1SMEN */ + +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM1SMEN) == 0U) + +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SPI1SMEN) == 0U) + +#if defined(TIM8) +#define __HAL_RCC_TIM8_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM8SMEN) == 0U) +#endif /* TIM8 */ + +#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_USART1SMEN) == 0U) + +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM15SMEN) == 0U) + +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM16SMEN) == 0U) + +#if defined(TIM17) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_TIM17SMEN) == 0U) +#endif /* TIM17 */ + +#if defined(SAI1) +#define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI1SMEN) == 0U) +#endif /* SAI1 */ + +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SAI2SMEN) == 0U) +#endif /* SAI2 */ + +#if defined(DFSDM1_Filter0) +#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DFSDM1SMEN) == 0U) +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_LTDCSMEN) == 0U) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_SLEEP_DISABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DSISMEN) == 0U) +#endif /* DSI */ + +/** + * @} + */ + +/** @defgroup RCC_Backup_Domain_Reset RCC Backup Domain Reset + * @{ + */ + +/** @brief Macros to force or release the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_CSR register. + * @note The BKPSRAM is not affected by this reset. + * @retval None + */ +#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +/** + * @} + */ + +/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration + * @{ + */ + +/** @brief Macros to enable or disable the RTC clock. + * @note As the RTC is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the RTC + * (to be done once after reset). + * @note These macros must be used after the RTC clock source was selected. + * @retval None + */ +#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** + * @} + */ + +/** @brief Macros to enable or disable the Internal High Speed 16MHz oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after startup + * from Reset, wakeup from STOP and STANDBY mode, or in case of failure + * of the HSE used directly or indirectly as system clock (if the Clock + * Security System CSS is enabled). + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * This parameter can be: ENABLE or DISABLE. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) + +#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) + +/** @brief Macro to adjust the Internal High Speed 16MHz oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 31 on STM32L43x/STM32L44x/STM32L47x/STM32L48x + * or between 0 and 127 on other devices. + * @retval None + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) \ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, (__HSICALIBRATIONVALUE__) << RCC_ICSCR_HSITRIM_Pos) + +/** + * @brief Macros to enable or disable the wakeup the Internal High Speed oscillator (HSI) + * in parallel to the Internal Multi Speed oscillator (MSI) used at system wakeup. + * @note The enable of this function has not effect on the HSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSIAUTOMATIC_START_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIASFS) + +#define __HAL_RCC_HSIAUTOMATIC_START_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIASFS) + +/** + * @brief Macros to enable or disable the force of the Internal High Speed oscillator (HSI) + * in STOP mode to be quickly available as kernel clock for USARTs and I2Cs. + * @note Keeping the HSI ON in STOP mode allows to avoid slowing down the communication + * speed because of the HSI startup time. + * @note The enable of this function has not effect on the HSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIKERON) + +#define __HAL_RCC_HSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON) + +/** + * @brief Macros to enable or disable the Internal Multi Speed oscillator (MSI). + * @note The MSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after + * startup from Reset, wakeup from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * @note MSI can not be stopped if it is used as system clock source. + * In this case, you have to select another source of the system + * clock then stop the MSI. + * @note After enabling the MSI, the application software should wait on + * MSIRDY flag to be set indicating that MSI clock is stable and can + * be used as system clock source. + * @note When the MSI is stopped, MSIRDY flag goes low after 6 MSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_MSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_MSION) + +#define __HAL_RCC_MSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_MSION) + +/** @brief Macro Adjusts the Internal Multi Speed oscillator (MSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal MSI RC. + * Refer to the Application Note AN3300 for more details on how to + * calibrate the MSI. + * @param __MSICALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_MSICALIBRATION_DEFAULT). + * This parameter must be a number between 0 and 255. + * @retval None + */ +#define __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(__MSICALIBRATIONVALUE__) \ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_MSITRIM, (__MSICALIBRATIONVALUE__) << RCC_ICSCR_MSITRIM_Pos) + +/** + * @brief Macro configures the Internal Multi Speed oscillator (MSI) clock range in run mode + * @note After restart from Reset , the MSI clock is around 4 MHz. + * After stop the startup clock can be MSI (at any of its possible + * frequencies, the one that was used before entering stop mode) or HSI. + * After Standby its frequency can be selected between 4 possible values + * (1, 2, 4 or 8 MHz). + * @note MSIRANGE can be modified when MSI is OFF (MSION=0) or when MSI is ready + * (MSIRDY=1). + * @note The MSI clock range after reset can be modified on the fly. + * @param __MSIRANGEVALUE__ specifies the MSI clock range. + * This parameter must be one of the following values: + * @arg @ref RCC_MSIRANGE_0 MSI clock is around 100 KHz + * @arg @ref RCC_MSIRANGE_1 MSI clock is around 200 KHz + * @arg @ref RCC_MSIRANGE_2 MSI clock is around 400 KHz + * @arg @ref RCC_MSIRANGE_3 MSI clock is around 800 KHz + * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz + * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2 MHz + * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4 MHz (default after Reset) + * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz + * @arg @ref RCC_MSIRANGE_8 MSI clock is around 16 MHz + * @arg @ref RCC_MSIRANGE_9 MSI clock is around 24 MHz + * @arg @ref RCC_MSIRANGE_10 MSI clock is around 32 MHz + * @arg @ref RCC_MSIRANGE_11 MSI clock is around 48 MHz + * @retval None + */ +#define __HAL_RCC_MSI_RANGE_CONFIG(__MSIRANGEVALUE__) \ + do { \ + SET_BIT(RCC->CR, RCC_CR_MSIRGSEL); \ + MODIFY_REG(RCC->CR, RCC_CR_MSIRANGE, (__MSIRANGEVALUE__)); \ + } while(0) + +/** + * @brief Macro configures the Internal Multi Speed oscillator (MSI) clock range after Standby mode + * After Standby its frequency can be selected between 4 possible values (1, 2, 4 or 8 MHz). + * @param __MSIRANGEVALUE__ specifies the MSI clock range. + * This parameter must be one of the following values: + * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz + * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2 MHz + * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4 MHz (default after Reset) + * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz + * @retval None + */ +#define __HAL_RCC_MSI_STANDBY_RANGE_CONFIG(__MSIRANGEVALUE__) \ + MODIFY_REG(RCC->CSR, RCC_CSR_MSISRANGE, (__MSIRANGEVALUE__) << 4U) + +/** @brief Macro to get the Internal Multi Speed oscillator (MSI) clock range in run mode + * @retval MSI clock range. + * This parameter must be one of the following values: + * @arg @ref RCC_MSIRANGE_0 MSI clock is around 100 KHz + * @arg @ref RCC_MSIRANGE_1 MSI clock is around 200 KHz + * @arg @ref RCC_MSIRANGE_2 MSI clock is around 400 KHz + * @arg @ref RCC_MSIRANGE_3 MSI clock is around 800 KHz + * @arg @ref RCC_MSIRANGE_4 MSI clock is around 1 MHz + * @arg @ref RCC_MSIRANGE_5 MSI clock is around 2 MHz + * @arg @ref RCC_MSIRANGE_6 MSI clock is around 4 MHz (default after Reset) + * @arg @ref RCC_MSIRANGE_7 MSI clock is around 8 MHz + * @arg @ref RCC_MSIRANGE_8 MSI clock is around 16 MHz + * @arg @ref RCC_MSIRANGE_9 MSI clock is around 24 MHz + * @arg @ref RCC_MSIRANGE_10 MSI clock is around 32 MHz + * @arg @ref RCC_MSIRANGE_11 MSI clock is around 48 MHz + */ +#define __HAL_RCC_GET_MSI_RANGE() \ + ((READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) != 0U) ? \ + READ_BIT(RCC->CR, RCC_CR_MSIRANGE) : \ + (READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE) >> 4U)) + +/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION) + +#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION) + +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF Turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg @ref RCC_HSE_ON Turn ON the HSE oscillator. + * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock. + * @retval None + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + } while(0) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF Turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg @ref RCC_LSE_ON Turn ON the LSE oscillator. + * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. + * @retval None + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + } while(0) + +#if defined(RCC_HSI48_SUPPORT) + +/** @brief Macros to enable or disable the Internal High Speed 48MHz oscillator (HSI48). + * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. + * @note After enabling the HSI48, the application software should wait on HSI48RDY + * flag to be set indicating that HSI48 clock is stable. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON) + +#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON) + +#endif /* RCC_HSI48_SUPPORT */ + +/** @brief Macros to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it cannot be changed unless the + * Backup domain is reset using __HAL_RCC_BACKUPRESET_FORCE() macro, or by + * a Power On Reset (POR). + * + * @param __RTC_CLKSOURCE__ specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + * + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + * @retval None + */ +#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) \ + MODIFY_REG( RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__)) + + +/** @brief Macro to get the RTC clock source. + * @retval The returned value can be one of the following: + * @arg @ref RCC_RTCCLKSOURCE_NONE No clock selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock. + * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32 selected + */ +#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) + +/** @brief Macros to enable or disable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL can not be disabled if it is used as system clock source + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + * @retval None + */ +#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON) + +#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON) + +/** @brief Macro to configure the PLL clock source. + * @note This function must be used only when the main PLL is disabled. + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_MSI MSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @note This clock source is common for the main PLL and audio PLL (PLLSAI1 and PLLSAI2). + * @retval None + * + */ +#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__)) + +/** @brief Macro to configure the PLL source division factor M. + * @note This function must be used only when the main PLL is disabled. + * @param __PLLM__ specifies the division factor for PLL VCO input clock + * This parameter must be a number between Min_Data = 1 and Max_Data = 16 on STM32L4Rx/STM32L4Sx devices. + * This parameter must be a number between Min_Data = 1 and Max_Data = 8 on other devices. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency + * of 16 MHz to limit PLL jitter. + * @retval None + * + */ +#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, ((__PLLM__) - 1) << 4U) + +/** + * @brief Macro to configure the main PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __PLLSOURCE__ specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSOURCE_NONE No clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_MSI MSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry + * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry + * @note This clock source is common for the main PLL and audio PLL (PLLSAI1 and PLLSAI2). + * + * @param __PLLM__ specifies the division factor for PLL VCO input clock. + * This parameter must be a number between Min_Data = 1 and Max_Data = 16 on STM32L4Rx/STM32L4Sx devices. + * This parameter must be a number between Min_Data = 1 and Max_Data = 8 on other devices. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 4 to 16 MHz. It is recommended to select a frequency + * of 16 MHz to limit PLL jitter. + * + * @param __PLLN__ specifies the multiplication factor for PLL VCO output clock. + * This parameter must be a number between 8 and 86. + * @note You have to set the PLLN parameter correctly to ensure that the VCO + * output frequency is between 64 and 344 MHz. + * + * @param __PLLP__ specifies the division factor for SAI clock when SAI available on device. + * This parameter must be a number in the range (7 or 17) for STM32L47x/STM32L48x + * else (2 to 31). + * + * @param __PLLQ__ specifies the division factor for OTG FS, SDMMC1 and RNG clocks. + * This parameter must be in the range (2, 4, 6 or 8). + * @note If the USB OTG FS is used in your application, you have to set the + * PLLQ parameter correctly to have 48 MHz clock for the USB. However, + * the SDMMC1 and RNG need a frequency lower than or equal to 48 MHz to work + * correctly. + * @param __PLLR__ specifies the division factor for the main system clock. + * @note You have to set the PLLR parameter correctly to not exceed 80MHZ. + * This parameter must be in the range (2, 4, 6 or 8). + * @retval None + */ +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) + +#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \ + MODIFY_REG(RCC->PLLCFGR, \ + (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ + RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR | RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLPDIV), \ + ((__PLLSOURCE__) | \ + (((__PLLM__) - 1U) << RCC_PLLCFGR_PLLM_Pos) | \ + ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + ((((__PLLQ__) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos) | \ + ((((__PLLR__) >> 1U) - 1U) << RCC_PLLCFGR_PLLR_Pos) | \ + ((uint32_t)(__PLLP__) << RCC_PLLCFGR_PLLPDIV_Pos))) + +#elif defined(RCC_PLLP_SUPPORT) + +#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__ ) \ + MODIFY_REG(RCC->PLLCFGR, \ + (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ + RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR | RCC_PLLCFGR_PLLP), \ + ((__PLLSOURCE__) | \ + (((__PLLM__) - 1U) << RCC_PLLCFGR_PLLM_Pos) | \ + ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + ((((__PLLQ__) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos) | \ + ((((__PLLR__) >> 1U) - 1U) << RCC_PLLCFGR_PLLR_Pos) | \ + (((__PLLP__) >> 4U) << RCC_PLLCFGR_PLLP_Pos))) + +#else + +#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLQ__,__PLLR__ ) \ + MODIFY_REG(RCC->PLLCFGR, \ + (RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \ + RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR), \ + ((__PLLSOURCE__) | \ + (((__PLLM__) - 1U) << RCC_PLLCFGR_PLLM_Pos) | \ + ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \ + ((((__PLLQ__) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos) | \ + ((((__PLLR__) >> 1U) - 1U) << RCC_PLLCFGR_PLLR_Pos))) + +#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ + +/** @brief Macro to get the oscillator used as PLL clock source. + * @retval The oscillator used as PLL clock source. The returned value can be one + * of the following: + * - RCC_PLLSOURCE_NONE: No oscillator is used as PLL clock source. + * - RCC_PLLSOURCE_MSI: MSI oscillator is used as PLL clock source. + * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source. + * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source. + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)) + +/** + * @brief Enable or disable each clock output (RCC_PLL_SYSCLK, RCC_PLL_48M1CLK, RCC_PLL_SAI3CLK) + * @note Enabling/disabling clock outputs RCC_PLL_SAI3CLK and RCC_PLL_48M1CLK can be done at anytime + * without the need to stop the PLL in order to save power. But RCC_PLL_SYSCLK cannot + * be stopped if used as System Clock. + * @param __PLLCLOCKOUT__ specifies the PLL clock to be output. + * This parameter can be one or a combination of the following values: + * @arg @ref RCC_PLL_SAI3CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLL_48M1CLK This Clock is used to generate the clock for the USB OTG FS (48 MHz), + * the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz). + * @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 80MHz) + * @retval None + */ +#define __HAL_RCC_PLLCLKOUT_ENABLE(__PLLCLOCKOUT__) SET_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +#define __HAL_RCC_PLLCLKOUT_DISABLE(__PLLCLOCKOUT__) CLEAR_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Get clock output enable status (RCC_PLL_SYSCLK, RCC_PLL_48M1CLK, RCC_PLL_SAI3CLK) + * @param __PLLCLOCKOUT__ specifies the output PLL clock to be checked. + * This parameter can be one of the following values: + * @arg @ref RCC_PLL_SAI3CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLL_48M1CLK This Clock is used to generate the clock for the USB OTG FS (48 MHz), + * the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz). + * @arg @ref RCC_PLL_SYSCLK This Clock is used to generate the high speed system clock (up to 80MHz) + * @retval SET / RESET + */ +#define __HAL_RCC_GET_PLLCLKOUT_CONFIG(__PLLCLOCKOUT__) READ_BIT(RCC->PLLCFGR, (__PLLCLOCKOUT__)) + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * - RCC_SYSCLKSOURCE_MSI: MSI oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source. + * @retval None + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * - RCC_SYSCLKSOURCE_STATUS_MSI: MSI used as system clock. + * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock. + * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock. + * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock. + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() (READ_BIT(RCC->CFGR, RCC_CFGR_SWS)) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @param __LSEDRIVE__ specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability. + * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability. + * @retval None + */ +#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (__LSEDRIVE__)) + +/** + * @brief Macro to configure the wake up from stop clock. + * @param __STOPWUCLK__ specifies the clock source used after wake up from stop. + * This parameter can be one of the following values: + * @arg @ref RCC_STOP_WAKEUPCLOCK_MSI MSI selected as system clock source + * @arg @ref RCC_STOP_WAKEUPCLOCK_HSI HSI selected as system clock source + * @retval None + */ +#define __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(__STOPWUCLK__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, (__STOPWUCLK__)) + + +/** @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_MSI MSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLCLK Main PLL clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source + @if STM32L443xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48 + @endif + @if STM32L4A6xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48 + @endif + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 + * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 + * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 + * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 + * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 + */ +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt(s). + * @param __INTERRUPT__ specifies the RCC interrupt source(s) to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_MSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt for devices with PLLSAI1 + * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2 + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32L443xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + @if STM32L4A6xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Disable RCC interrupt(s). + * @param __INTERRUPT__ specifies the RCC interrupt source(s) to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_MSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt for devices with PLLSAI1 + * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2 + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32L443xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + @if STM32L4A6xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Clear the RCC's interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_MSIRDY MSI ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt for devices with PLLSAI1 + * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2 + * @arg @ref RCC_IT_CSS HSE Clock security system interrupt + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32L443xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + @if STM32L4A6xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval None + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) WRITE_REG(RCC->CICR, (__INTERRUPT__)) + +/** @brief Check whether the RCC interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_IT_LSIRDY LSI ready interrupt + * @arg @ref RCC_IT_LSERDY LSE ready interrupt + * @arg @ref RCC_IT_MSIRDY MSI ready interrupt + * @arg @ref RCC_IT_HSIRDY HSI ready interrupt + * @arg @ref RCC_IT_HSERDY HSE ready interrupt + * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt + * @arg @ref RCC_IT_PLLSAI1RDY PLLSAI1 ready interrupt for devices with PLLSAI1 + * @arg @ref RCC_IT_PLLSAI2RDY PLLSAI2 ready interrupt for devices with PLLSAI2 + * @arg @ref RCC_IT_CSS HSE Clock security system interrupt + * @arg @ref RCC_IT_LSECSS LSE Clock security system interrupt + @if STM32L443xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + @if STM32L4A6xx + * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt for devices with HSI48 + @endif + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) (READ_BIT(RCC->CIFR, (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are: RCC_FLAG_FWRRST, RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_BORRST, + * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. + * @retval None + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() SET_BIT(RCC->CSR, RCC_CSR_RMVF) + +/** @brief Check whether the selected RCC flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_MSIRDY MSI oscillator clock ready + * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready + * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready + * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready + * @arg @ref RCC_FLAG_PLLSAI1RDY PLLSAI1 clock ready for devices with PLLSAI1 + * @arg @ref RCC_FLAG_PLLSAI2RDY PLLSAI2 clock ready for devices with PLLSAI2 + @if STM32L443xx + * @arg @ref RCC_FLAG_HSI48RDY HSI48 clock ready for devices with HSI48 + @endif + @if STM32L4A6xx + * @arg @ref RCC_FLAG_HSI48RDY HSI48 clock ready for devices with HSI48 + @endif + * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready + * @arg @ref RCC_FLAG_LSECSSD Clock security system failure on LSE oscillator detection + * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready + * @arg @ref RCC_FLAG_BORRST BOR reset + * @arg @ref RCC_FLAG_OBLRST OBLRST reset + * @arg @ref RCC_FLAG_PINRST Pin reset + * @arg @ref RCC_FLAG_FWRST FIREWALL reset + * @arg @ref RCC_FLAG_SFTRST Software reset + * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset + * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset + * @arg @ref RCC_FLAG_LPWRRST Low Power reset + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#if defined(RCC_HSI48_SUPPORT) +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U) ? RCC->CR : \ + ((((__FLAG__) >> 5U) == 4U) ? RCC->CRRCR : \ + ((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ + ((((__FLAG__) >> 5U) == 3U) ? RCC->CSR : RCC->CIFR)))) & \ + (1U << ((__FLAG__) & RCC_FLAG_MASK))) != 0U) ? 1U : 0U) +#else +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U) ? RCC->CR : \ + ((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ + ((((__FLAG__) >> 5U) == 3U) ? RCC->CSR : RCC->CIFR))) & \ + (1U << ((__FLAG__) & RCC_FLAG_MASK))) != 0U) ? 1U : 0U) +#endif /* RCC_HSI48_SUPPORT */ + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +/* Defines used for Flags */ +#define CR_REG_INDEX 1U +#define BDCR_REG_INDEX 2U +#define CSR_REG_INDEX 3U +#if defined(RCC_HSI48_SUPPORT) +#define CRRCR_REG_INDEX 4U +#endif /* RCC_HSI48_SUPPORT */ + +#define RCC_FLAG_MASK 0x1FU + +/* Defines Oscillator Masks */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_OSCILLATORTYPE_ALL (RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE) /*!< All Oscillator to configure */ +#else +#define RCC_OSCILLATORTYPE_ALL (RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE) /*!< All Oscillator to configure */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_Reset_Flag Reset Flag + * @{ + */ +#define RCC_RESET_FLAG_OBL RCC_CSR_OBLRSTF /*!< Option Byte Loader reset flag */ +#define RCC_RESET_FLAG_PIN RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define RCC_RESET_FLAG_PWR RCC_CSR_BORRSTF /*!< BOR or POR/PDR reset flag */ +#define RCC_RESET_FLAG_SW RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define RCC_RESET_FLAG_IWDG RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define RCC_RESET_FLAG_WWDG RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define RCC_RESET_FLAG_LPWR RCC_CSR_LPWRRSTF /*!< Low power reset flag */ +#define RCC_RESET_FLAG_ALL (RCC_RESET_FLAG_OBL | RCC_RESET_FLAG_PIN | RCC_RESET_FLAG_PWR | \ + RCC_RESET_FLAG_SW | RCC_RESET_FLAG_IWDG | RCC_RESET_FLAG_WWDG | \ + RCC_RESET_FLAG_LPWR) +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_Private_Macros + * @{ + */ + +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ + (((__OSCILLATOR__) & ~RCC_OSCILLATORTYPE_ALL) == 0x00U)) + +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ + ((__HSE__) == RCC_HSE_BYPASS)) + +#if defined(RCC_BDCR_LSESYSDIS) +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || ((__LSE__) == RCC_LSE_BYPASS_RTC_ONLY) || \ + ((__LSE__) == RCC_LSE_ON_RTC_ONLY) || ((__LSE__) == RCC_LSE_BYPASS)) +#else +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ + ((__LSE__) == RCC_LSE_BYPASS)) +#endif /* RCC_BDCR_LSESYSDIS */ + +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) + +#define IS_RCC_HSI_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= (RCC_ICSCR_HSITRIM >> RCC_ICSCR_HSITRIM_Pos)) + +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) + +#if defined(RCC_CSR_LSIPREDIV) +#define IS_RCC_LSIDIV(__LSIDIV__) (((__LSIDIV__) == RCC_LSI_DIV1) || ((__LSIDIV__) == RCC_LSI_DIV128)) +#endif /* RCC_CSR_LSIPREDIV */ + +#define IS_RCC_MSI(__MSI__) (((__MSI__) == RCC_MSI_OFF) || ((__MSI__) == RCC_MSI_ON)) + +#define IS_RCC_MSICALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 255U) + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_HSI48(__HSI48__) (((__HSI48__) == RCC_HSI48_OFF) || ((__HSI48__) == RCC_HSI48_ON)) +#endif /* RCC_HSI48_SUPPORT */ + +#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) ||((__PLL__) == RCC_PLL_OFF) || \ + ((__PLL__) == RCC_PLL_ON)) + +#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_NONE) || \ + ((__SOURCE__) == RCC_PLLSOURCE_MSI) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSI) || \ + ((__SOURCE__) == RCC_PLLSOURCE_HSE)) + +#if defined(RCC_PLLM_DIV_1_16_SUPPORT) +#define IS_RCC_PLLM_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 16U)) +#else +#define IS_RCC_PLLM_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U)) +#endif /*RCC_PLLM_DIV_1_16_SUPPORT */ + +#define IS_RCC_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) + +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) +#define IS_RCC_PLLP_VALUE(__VALUE__) (((__VALUE__) >= 2U) && ((__VALUE__) <= 31U)) +#else +#define IS_RCC_PLLP_VALUE(__VALUE__) (((__VALUE__) == 7U) || ((__VALUE__) == 17U)) +#endif /*RCC_PLLP_DIV_2_31_SUPPORT */ + +#define IS_RCC_PLLQ_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ + ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) + +#define IS_RCC_PLLR_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ + ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) + +#if defined(RCC_PLLSAI1_SUPPORT) +#define IS_RCC_PLLSAI1CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI1_SAI1CLK) == RCC_PLLSAI1_SAI1CLK) || \ + (((__VALUE__) & RCC_PLLSAI1_48M2CLK) == RCC_PLLSAI1_48M2CLK) || \ + (((__VALUE__) & RCC_PLLSAI1_ADC1CLK) == RCC_PLLSAI1_ADC1CLK)) && \ + (((__VALUE__) & ~(RCC_PLLSAI1_SAI1CLK|RCC_PLLSAI1_48M2CLK|RCC_PLLSAI1_ADC1CLK)) == 0U)) +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) +#define IS_RCC_PLLSAI2CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI2_SAI2CLK) == RCC_PLLSAI2_SAI2CLK) || \ + (((__VALUE__) & RCC_PLLSAI2_ADC2CLK) == RCC_PLLSAI2_ADC2CLK)) && \ + (((__VALUE__) & ~(RCC_PLLSAI2_SAI2CLK|RCC_PLLSAI2_ADC2CLK)) == 0U)) +#elif defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define IS_RCC_PLLSAI2CLOCKOUT_VALUE(__VALUE__) (((((__VALUE__) & RCC_PLLSAI2_SAI2CLK) == RCC_PLLSAI2_SAI2CLK) || \ + (((__VALUE__) & RCC_PLLSAI2_DSICLK) == RCC_PLLSAI2_DSICLK) || \ + (((__VALUE__) & RCC_PLLSAI2_LTDCCLK) == RCC_PLLSAI2_LTDCCLK)) && \ + (((__VALUE__) & ~(RCC_PLLSAI2_SAI2CLK|RCC_PLLSAI2_DSICLK|RCC_PLLSAI2_LTDCCLK)) == 0U)) +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ +#endif /* RCC_PLLSAI2_SUPPORT */ + +#define IS_RCC_MSI_CLOCK_RANGE(__RANGE__) (((__RANGE__) == RCC_MSIRANGE_0) || \ + ((__RANGE__) == RCC_MSIRANGE_1) || \ + ((__RANGE__) == RCC_MSIRANGE_2) || \ + ((__RANGE__) == RCC_MSIRANGE_3) || \ + ((__RANGE__) == RCC_MSIRANGE_4) || \ + ((__RANGE__) == RCC_MSIRANGE_5) || \ + ((__RANGE__) == RCC_MSIRANGE_6) || \ + ((__RANGE__) == RCC_MSIRANGE_7) || \ + ((__RANGE__) == RCC_MSIRANGE_8) || \ + ((__RANGE__) == RCC_MSIRANGE_9) || \ + ((__RANGE__) == RCC_MSIRANGE_10) || \ + ((__RANGE__) == RCC_MSIRANGE_11)) + +#define IS_RCC_MSI_STANDBY_CLOCK_RANGE(__RANGE__) (((__RANGE__) == RCC_MSIRANGE_4) || \ + ((__RANGE__) == RCC_MSIRANGE_5) || \ + ((__RANGE__) == RCC_MSIRANGE_6) || \ + ((__RANGE__) == RCC_MSIRANGE_7)) + +#define IS_RCC_CLOCKTYPE(__CLK__) ((1U <= (__CLK__)) && ((__CLK__) <= 15U)) + +#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_MSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK)) + +#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ + ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ + ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ + ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ + ((__HCLK__) == RCC_SYSCLK_DIV512)) + +#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ + ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ + ((__PCLK__) == RCC_HCLK_DIV16)) + +#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32)) + +#define IS_RCC_MCO(__MCOX__) ((__MCOX__) == RCC_MCO1) + +#if defined(RCC_HSI48_SUPPORT) +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI48)) +#else +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || \ + ((__SOURCE__) == RCC_MCO1SOURCE_LSE)) +#endif /* RCC_HSI48_SUPPORT */ + +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \ + ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \ + ((__DIV__) == RCC_MCODIV_16)) + +#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \ + ((__DRIVE__) == RCC_LSEDRIVE_HIGH)) + +#define IS_RCC_STOP_WAKEUPCLOCK(__SOURCE__) (((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_MSI) || \ + ((__SOURCE__) == RCC_STOP_WAKEUPCLOCK_HSI)) +/** + * @} + */ + +/* Include RCC HAL Extended module */ +#include "stm32l4xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +uint32_t HAL_RCC_GetPCLK2Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); +/* CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); + +uint32_t HAL_RCC_GetResetSource(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_RCC_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h new file mode 100644 index 0000000..e0db863 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h @@ -0,0 +1,3045 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_RCC_EX_H +#define STM32L4xx_HAL_RCC_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +#if defined(RCC_PLLSAI1_SUPPORT) +/** + * @brief PLLSAI1 Clock structure definition + */ +typedef struct +{ + + uint32_t PLLSAI1Source; /*!< PLLSAI1Source: PLLSAI1 entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + uint32_t PLLSAI1M; /*!< PLLSAI1M: specifies the division factor for PLLSAI1 input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ +#else + uint32_t PLLSAI1M; /*!< PLLSAI1M: specifies the division factor for PLLSAI1 input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 8 */ +#endif + + uint32_t PLLSAI1N; /*!< PLLSAI1N: specifies the multiplication factor for PLLSAI1 VCO output clock. + This parameter must be a number between 8 and 86 or 127 depending on devices. */ + + uint32_t PLLSAI1P; /*!< PLLSAI1P: specifies the division factor for SAI clock. + This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ + + uint32_t PLLSAI1Q; /*!< PLLSAI1Q: specifies the division factor for USB/RNG/SDMMC1 clock. + This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */ + + uint32_t PLLSAI1R; /*!< PLLSAI1R: specifies the division factor for ADC clock. + This parameter must be a value of @ref RCC_PLLR_Clock_Divider */ + + uint32_t PLLSAI1ClockOut; /*!< PLLSAIClockOut: specifies PLLSAI1 output clock to be enabled. + This parameter must be a value of @ref RCC_PLLSAI1_Clock_Output */ +}RCC_PLLSAI1InitTypeDef; +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) +/** + * @brief PLLSAI2 Clock structure definition + */ +typedef struct +{ + + uint32_t PLLSAI2Source; /*!< PLLSAI2Source: PLLSAI2 entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + uint32_t PLLSAI2M; /*!< PLLSAI2M: specifies the division factor for PLLSAI2 input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ +#else + uint32_t PLLSAI2M; /*!< PLLSAI2M: specifies the division factor for PLLSAI2 input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 8 */ +#endif + + uint32_t PLLSAI2N; /*!< PLLSAI2N: specifies the multiplication factor for PLLSAI2 VCO output clock. + This parameter must be a number between 8 and 86 or 127 depending on devices. */ + + uint32_t PLLSAI2P; /*!< PLLSAI2P: specifies the division factor for SAI clock. + This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ + +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) + uint32_t PLLSAI2Q; /*!< PLLSAI2Q: specifies the division factor for DSI clock. + This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */ +#endif + + uint32_t PLLSAI2R; /*!< PLLSAI2R: specifies the division factor for ADC clock. + This parameter must be a value of @ref RCC_PLLR_Clock_Divider */ + + uint32_t PLLSAI2ClockOut; /*!< PLLSAIClockOut: specifies PLLSAI2 output clock to be enabled. + This parameter must be a value of @ref RCC_PLLSAI2_Clock_Output */ +}RCC_PLLSAI2InitTypeDef; + +#endif /* RCC_PLLSAI2_SUPPORT */ + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ +#if defined(RCC_PLLSAI1_SUPPORT) + + RCC_PLLSAI1InitTypeDef PLLSAI1; /*!< PLLSAI1 structure parameters. + This parameter will be used only when PLLSAI1 is selected as Clock Source for SAI1, USB/RNG/SDMMC1 or ADC */ +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(RCC_PLLSAI2_SUPPORT) + + RCC_PLLSAI2InitTypeDef PLLSAI2; /*!< PLLSAI2 structure parameters. + This parameter will be used only when PLLSAI2 is selected as Clock Source for SAI2 or ADC */ + +#endif /* RCC_PLLSAI2_SUPPORT */ + + uint32_t Usart1ClockSelection; /*!< Specifies USART1 clock source. + This parameter can be a value of @ref RCCEx_USART1_Clock_Source */ + + uint32_t Usart2ClockSelection; /*!< Specifies USART2 clock source. + This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ + +#if defined(USART3) + + uint32_t Usart3ClockSelection; /*!< Specifies USART3 clock source. + This parameter can be a value of @ref RCCEx_USART3_Clock_Source */ + +#endif /* USART3 */ + +#if defined(UART4) + + uint32_t Uart4ClockSelection; /*!< Specifies UART4 clock source. + This parameter can be a value of @ref RCCEx_UART4_Clock_Source */ + +#endif /* UART4 */ + +#if defined(UART5) + + uint32_t Uart5ClockSelection; /*!< Specifies UART5 clock source. + This parameter can be a value of @ref RCCEx_UART5_Clock_Source */ + +#endif /* UART5 */ + + uint32_t Lpuart1ClockSelection; /*!< Specifies LPUART1 clock source. + This parameter can be a value of @ref RCCEx_LPUART1_Clock_Source */ + + uint32_t I2c1ClockSelection; /*!< Specifies I2C1 clock source. + This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */ + +#if defined(I2C2) + + uint32_t I2c2ClockSelection; /*!< Specifies I2C2 clock source. + This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */ + +#endif /* I2C2 */ + + uint32_t I2c3ClockSelection; /*!< Specifies I2C3 clock source. + This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */ + +#if defined(I2C4) + + uint32_t I2c4ClockSelection; /*!< Specifies I2C4 clock source. + This parameter can be a value of @ref RCCEx_I2C4_Clock_Source */ + +#endif /* I2C4 */ + + uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source. + This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ + + uint32_t Lptim2ClockSelection; /*!< Specifies LPTIM2 clock source. + This parameter can be a value of @ref RCCEx_LPTIM2_Clock_Source */ +#if defined(SAI1) + + uint32_t Sai1ClockSelection; /*!< Specifies SAI1 clock source. + This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */ +#endif /* SAI1 */ + +#if defined(SAI2) + + uint32_t Sai2ClockSelection; /*!< Specifies SAI2 clock source. + This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */ + +#endif /* SAI2 */ + +#if defined(USB_OTG_FS) || defined(USB) + + uint32_t UsbClockSelection; /*!< Specifies USB clock source (warning: same source for SDMMC1 and RNG). + This parameter can be a value of @ref RCCEx_USB_Clock_Source */ + +#endif /* USB_OTG_FS || USB */ + +#if defined(SDMMC1) + + uint32_t Sdmmc1ClockSelection; /*!< Specifies SDMMC1 clock source (warning: same source for USB and RNG). + This parameter can be a value of @ref RCCEx_SDMMC1_Clock_Source */ + +#endif /* SDMMC1 */ + + uint32_t RngClockSelection; /*!< Specifies RNG clock source (warning: same source for USB and SDMMC1). + This parameter can be a value of @ref RCCEx_RNG_Clock_Source */ + +#if !defined(STM32L412xx) && !defined(STM32L422xx) + uint32_t AdcClockSelection; /*!< Specifies ADC interface clock source. + This parameter can be a value of @ref RCCEx_ADC_Clock_Source */ +#endif /* !STM32L412xx && !STM32L422xx */ + +#if defined(SWPMI1) + + uint32_t Swpmi1ClockSelection; /*!< Specifies SWPMI1 clock source. + This parameter can be a value of @ref RCCEx_SWPMI1_Clock_Source */ + +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Filter0) + + uint32_t Dfsdm1ClockSelection; /*!< Specifies DFSDM1 clock source. + This parameter can be a value of @ref RCCEx_DFSDM1_Clock_Source */ + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + uint32_t Dfsdm1AudioClockSelection; /*!< Specifies DFSDM1 audio clock source. + This parameter can be a value of @ref RCCEx_DFSDM1_Audio_Clock_Source */ + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) + + uint32_t LtdcClockSelection; /*!< Specifies LTDC clock source. + This parameter can be a value of @ref RCCEx_LTDC_Clock_Source */ + +#endif /* LTDC */ + +#if defined(DSI) + + uint32_t DsiClockSelection; /*!< Specifies DSI clock source. + This parameter can be a value of @ref RCCEx_DSI_Clock_Source */ + +#endif /* DSI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + + uint32_t OspiClockSelection; /*!< Specifies OctoSPI clock source. + This parameter can be a value of @ref RCCEx_OSPI_Clock_Source */ + +#endif + + uint32_t RTCClockSelection; /*!< Specifies RTC clock source. + This parameter can be a value of @ref RCC_RTC_Clock_Source */ +}RCC_PeriphCLKInitTypeDef; + +#if defined(CRS) + +/** + * @brief RCC_CRS Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal. + This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */ + + uint32_t Source; /*!< Specifies the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroSource */ + + uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source. + This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */ + + uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event. + It can be calculated in using macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) + This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/ + + uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value. + This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */ + + uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator. + This parameter must be a number between 0 and 0x7F for STM32L412xx/L422xx, between 0 and 0x3F otherwise, + or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */ + +}RCC_CRSInitTypeDef; + +/** + * @brief RCC_CRS Synchronization structure definition + */ +typedef struct +{ + uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming. + This parameter must be a number between 0 and 0x7F for STM32L412xx/L422xx, between 0 and 0x3F otherwise */ + + uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter + value latched in the time of the last SYNC event. + This parameter must be a number between 0 and 0xFFFF */ + + uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the + frequency error counter latched in the time of the last SYNC event. + It shows whether the actual frequency is below or above the target. + This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/ + +}RCC_CRSSynchroInfoTypeDef; + +#endif /* CRS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCCEx_LSCO_Clock_Source Low Speed Clock Source + * @{ + */ +#define RCC_LSCOSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock output */ +#define RCC_LSCOSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock output */ +/** + * @} + */ + +/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection + * @{ + */ +#define RCC_PERIPHCLK_USART1 0x00000001U +#define RCC_PERIPHCLK_USART2 0x00000002U +#if defined(USART3) +#define RCC_PERIPHCLK_USART3 0x00000004U +#endif +#if defined(UART4) +#define RCC_PERIPHCLK_UART4 0x00000008U +#endif +#if defined(UART5) +#define RCC_PERIPHCLK_UART5 0x00000010U +#endif +#define RCC_PERIPHCLK_LPUART1 0x00000020U +#define RCC_PERIPHCLK_I2C1 0x00000040U +#if defined(I2C2) +#define RCC_PERIPHCLK_I2C2 0x00000080U +#endif +#define RCC_PERIPHCLK_I2C3 0x00000100U +#define RCC_PERIPHCLK_LPTIM1 0x00000200U +#define RCC_PERIPHCLK_LPTIM2 0x00000400U +#if defined(SAI1) +#define RCC_PERIPHCLK_SAI1 0x00000800U +#endif +#if defined(SAI2) +#define RCC_PERIPHCLK_SAI2 0x00001000U +#endif +#if defined(USB_OTG_FS) || defined(USB) +#define RCC_PERIPHCLK_USB 0x00002000U +#endif +#define RCC_PERIPHCLK_ADC 0x00004000U +#if defined(SWPMI1) +#define RCC_PERIPHCLK_SWPMI1 0x00008000U +#endif +#if defined(DFSDM1_Filter0) +#define RCC_PERIPHCLK_DFSDM1 0x00010000U +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define RCC_PERIPHCLK_DFSDM1AUDIO 0x00200000U +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +#endif +#define RCC_PERIPHCLK_RTC 0x00020000U +#define RCC_PERIPHCLK_RNG 0x00040000U +#if defined(SDMMC1) +#define RCC_PERIPHCLK_SDMMC1 0x00080000U +#endif +#if defined(I2C4) +#define RCC_PERIPHCLK_I2C4 0x00100000U +#endif +#if defined(LTDC) +#define RCC_PERIPHCLK_LTDC 0x00400000U +#endif +#if defined(DSI) +#define RCC_PERIPHCLK_DSI 0x00800000U +#endif +#if defined(OCTOSPI1) || defined(OCTOSPI2) +#define RCC_PERIPHCLK_OSPI 0x01000000U +#endif +/** + * @} + */ + + +/** @defgroup RCCEx_USART1_Clock_Source USART1 Clock Source + * @{ + */ +#define RCC_USART1CLKSOURCE_PCLK2 0x00000000U +#define RCC_USART1CLKSOURCE_SYSCLK RCC_CCIPR_USART1SEL_0 +#define RCC_USART1CLKSOURCE_HSI RCC_CCIPR_USART1SEL_1 +#define RCC_USART1CLKSOURCE_LSE (RCC_CCIPR_USART1SEL_0 | RCC_CCIPR_USART1SEL_1) +/** + * @} + */ + +/** @defgroup RCCEx_USART2_Clock_Source USART2 Clock Source + * @{ + */ +#define RCC_USART2CLKSOURCE_PCLK1 0x00000000U +#define RCC_USART2CLKSOURCE_SYSCLK RCC_CCIPR_USART2SEL_0 +#define RCC_USART2CLKSOURCE_HSI RCC_CCIPR_USART2SEL_1 +#define RCC_USART2CLKSOURCE_LSE (RCC_CCIPR_USART2SEL_0 | RCC_CCIPR_USART2SEL_1) +/** + * @} + */ + +#if defined(USART3) +/** @defgroup RCCEx_USART3_Clock_Source USART3 Clock Source + * @{ + */ +#define RCC_USART3CLKSOURCE_PCLK1 0x00000000U +#define RCC_USART3CLKSOURCE_SYSCLK RCC_CCIPR_USART3SEL_0 +#define RCC_USART3CLKSOURCE_HSI RCC_CCIPR_USART3SEL_1 +#define RCC_USART3CLKSOURCE_LSE (RCC_CCIPR_USART3SEL_0 | RCC_CCIPR_USART3SEL_1) +/** + * @} + */ +#endif /* USART3 */ + +#if defined(UART4) +/** @defgroup RCCEx_UART4_Clock_Source UART4 Clock Source + * @{ + */ +#define RCC_UART4CLKSOURCE_PCLK1 0x00000000U +#define RCC_UART4CLKSOURCE_SYSCLK RCC_CCIPR_UART4SEL_0 +#define RCC_UART4CLKSOURCE_HSI RCC_CCIPR_UART4SEL_1 +#define RCC_UART4CLKSOURCE_LSE (RCC_CCIPR_UART4SEL_0 | RCC_CCIPR_UART4SEL_1) +/** + * @} + */ +#endif /* UART4 */ + +#if defined(UART5) +/** @defgroup RCCEx_UART5_Clock_Source UART5 Clock Source + * @{ + */ +#define RCC_UART5CLKSOURCE_PCLK1 0x00000000U +#define RCC_UART5CLKSOURCE_SYSCLK RCC_CCIPR_UART5SEL_0 +#define RCC_UART5CLKSOURCE_HSI RCC_CCIPR_UART5SEL_1 +#define RCC_UART5CLKSOURCE_LSE (RCC_CCIPR_UART5SEL_0 | RCC_CCIPR_UART5SEL_1) +/** + * @} + */ +#endif /* UART5 */ + +/** @defgroup RCCEx_LPUART1_Clock_Source LPUART1 Clock Source + * @{ + */ +#define RCC_LPUART1CLKSOURCE_PCLK1 0x00000000U +#define RCC_LPUART1CLKSOURCE_SYSCLK RCC_CCIPR_LPUART1SEL_0 +#define RCC_LPUART1CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1 +#define RCC_LPUART1CLKSOURCE_LSE (RCC_CCIPR_LPUART1SEL_0 | RCC_CCIPR_LPUART1SEL_1) +/** + * @} + */ + +/** @defgroup RCCEx_I2C1_Clock_Source I2C1 Clock Source + * @{ + */ +#define RCC_I2C1CLKSOURCE_PCLK1 0x00000000U +#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CCIPR_I2C1SEL_0 +#define RCC_I2C1CLKSOURCE_HSI RCC_CCIPR_I2C1SEL_1 +/** + * @} + */ + +#if defined(I2C2) +/** @defgroup RCCEx_I2C2_Clock_Source I2C2 Clock Source + * @{ + */ +#define RCC_I2C2CLKSOURCE_PCLK1 0x00000000U +#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CCIPR_I2C2SEL_0 +#define RCC_I2C2CLKSOURCE_HSI RCC_CCIPR_I2C2SEL_1 +/** + * @} + */ +#endif /* I2C2 */ + +/** @defgroup RCCEx_I2C3_Clock_Source I2C3 Clock Source + * @{ + */ +#define RCC_I2C3CLKSOURCE_PCLK1 0x00000000U +#define RCC_I2C3CLKSOURCE_SYSCLK RCC_CCIPR_I2C3SEL_0 +#define RCC_I2C3CLKSOURCE_HSI RCC_CCIPR_I2C3SEL_1 +/** + * @} + */ + +#if defined(I2C4) +/** @defgroup RCCEx_I2C4_Clock_Source I2C4 Clock Source + * @{ + */ +#define RCC_I2C4CLKSOURCE_PCLK1 0x00000000U +#define RCC_I2C4CLKSOURCE_SYSCLK RCC_CCIPR2_I2C4SEL_0 +#define RCC_I2C4CLKSOURCE_HSI RCC_CCIPR2_I2C4SEL_1 +/** + * @} + */ +#endif /* I2C4 */ + +#if defined(SAI1) +/** @defgroup RCCEx_SAI1_Clock_Source SAI1 Clock Source + * @{ + */ +#define RCC_SAI1CLKSOURCE_PLLSAI1 0x00000000U +#if defined(RCC_PLLSAI2_SUPPORT) +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define RCC_SAI1CLKSOURCE_PLLSAI2 RCC_CCIPR2_SAI1SEL_0 +#else +#define RCC_SAI1CLKSOURCE_PLLSAI2 RCC_CCIPR_SAI1SEL_0 +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +#endif /* RCC_PLLSAI2_SUPPORT */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define RCC_SAI1CLKSOURCE_PLL RCC_CCIPR2_SAI1SEL_1 +#define RCC_SAI1CLKSOURCE_PIN (RCC_CCIPR2_SAI1SEL_1 | RCC_CCIPR2_SAI1SEL_0) +#define RCC_SAI1CLKSOURCE_HSI RCC_CCIPR2_SAI1SEL_2 +#else +#define RCC_SAI1CLKSOURCE_PLL RCC_CCIPR_SAI1SEL_1 +#define RCC_SAI1CLKSOURCE_PIN RCC_CCIPR_SAI1SEL +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +/** + * @} + */ +#endif /* SAI1 */ + +#if defined(SAI2) +/** @defgroup RCCEx_SAI2_Clock_Source SAI2 Clock Source + * @{ + */ +#define RCC_SAI2CLKSOURCE_PLLSAI1 0x00000000U +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define RCC_SAI2CLKSOURCE_PLLSAI2 RCC_CCIPR2_SAI2SEL_0 +#define RCC_SAI2CLKSOURCE_PLL RCC_CCIPR2_SAI2SEL_1 +#define RCC_SAI2CLKSOURCE_PIN (RCC_CCIPR2_SAI2SEL_1 | RCC_CCIPR2_SAI2SEL_0) +#define RCC_SAI2CLKSOURCE_HSI RCC_CCIPR2_SAI2SEL_2 +#else +#define RCC_SAI2CLKSOURCE_PLLSAI2 RCC_CCIPR_SAI2SEL_0 +#define RCC_SAI2CLKSOURCE_PLL RCC_CCIPR_SAI2SEL_1 +#define RCC_SAI2CLKSOURCE_PIN RCC_CCIPR_SAI2SEL +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +/** + * @} + */ +#endif /* SAI2 */ + +/** @defgroup RCCEx_LPTIM1_Clock_Source LPTIM1 Clock Source + * @{ + */ +#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U +#define RCC_LPTIM1CLKSOURCE_LSI RCC_CCIPR_LPTIM1SEL_0 +#define RCC_LPTIM1CLKSOURCE_HSI RCC_CCIPR_LPTIM1SEL_1 +#define RCC_LPTIM1CLKSOURCE_LSE RCC_CCIPR_LPTIM1SEL +/** + * @} + */ + +/** @defgroup RCCEx_LPTIM2_Clock_Source LPTIM2 Clock Source + * @{ + */ +#define RCC_LPTIM2CLKSOURCE_PCLK1 0x00000000U +#define RCC_LPTIM2CLKSOURCE_LSI RCC_CCIPR_LPTIM2SEL_0 +#define RCC_LPTIM2CLKSOURCE_HSI RCC_CCIPR_LPTIM2SEL_1 +#define RCC_LPTIM2CLKSOURCE_LSE RCC_CCIPR_LPTIM2SEL +/** + * @} + */ + +#if defined(SDMMC1) +/** @defgroup RCCEx_SDMMC1_Clock_Source SDMMC1 Clock Source + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_SDMMC1CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock selected as SDMMC1 clock */ +#else +#define RCC_SDMMC1CLKSOURCE_NONE 0x00000000U /*!< No clock selected as SDMMC1 clock */ +#endif /* RCC_HSI48_SUPPORT */ +#define RCC_SDMMC1CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 "Q" clock selected as SDMMC1 clock */ +#define RCC_SDMMC1CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL "Q" clock selected as SDMMC1 clock */ +#define RCC_SDMMC1CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI clock selected as SDMMC1 clock */ +#if defined(RCC_CCIPR2_SDMMCSEL) +#define RCC_SDMMC1CLKSOURCE_PLLP RCC_CCIPR2_SDMMCSEL /*!< PLL "P" clock selected as SDMMC1 kernel clock */ +#endif /* RCC_CCIPR2_SDMMCSEL */ +/** + * @} + */ +#endif /* SDMMC1 */ + +/** @defgroup RCCEx_RNG_Clock_Source RNG Clock Source + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_RNGCLKSOURCE_HSI48 0x00000000U +#else +#define RCC_RNGCLKSOURCE_NONE 0x00000000U +#endif /* RCC_HSI48_SUPPORT */ +#if defined(RCC_PLLSAI1_SUPPORT) +#define RCC_RNGCLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 +#endif /* RCC_PLLSAI1_SUPPORT */ +#define RCC_RNGCLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 +#define RCC_RNGCLKSOURCE_MSI RCC_CCIPR_CLK48SEL +/** + * @} + */ + +#if defined(USB_OTG_FS) || defined(USB) +/** @defgroup RCCEx_USB_Clock_Source USB Clock Source + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define RCC_USBCLKSOURCE_HSI48 0x00000000U +#else +#define RCC_USBCLKSOURCE_NONE 0x00000000U +#endif /* RCC_HSI48_SUPPORT */ +#if defined(RCC_PLLSAI1_SUPPORT) +#define RCC_USBCLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 +#endif /* RCC_PLLSAI1_SUPPORT */ +#define RCC_USBCLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 +#define RCC_USBCLKSOURCE_MSI RCC_CCIPR_CLK48SEL +/** + * @} + */ +#endif /* USB_OTG_FS || USB */ + +/** @defgroup RCCEx_ADC_Clock_Source ADC Clock Source + * @{ + */ +#define RCC_ADCCLKSOURCE_NONE 0x00000000U +#if defined(RCC_PLLSAI1_SUPPORT) +#define RCC_ADCCLKSOURCE_PLLSAI1 RCC_CCIPR_ADCSEL_0 +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) +#define RCC_ADCCLKSOURCE_PLLSAI2 RCC_CCIPR_ADCSEL_1 +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ +#if defined(RCC_CCIPR_ADCSEL) +#define RCC_ADCCLKSOURCE_SYSCLK RCC_CCIPR_ADCSEL +#else +#define RCC_ADCCLKSOURCE_SYSCLK 0x30000000U +#endif /* RCC_CCIPR_ADCSEL */ +/** + * @} + */ + +#if defined(SWPMI1) +/** @defgroup RCCEx_SWPMI1_Clock_Source SWPMI1 Clock Source + * @{ + */ +#define RCC_SWPMI1CLKSOURCE_PCLK1 0x00000000U +#define RCC_SWPMI1CLKSOURCE_HSI RCC_CCIPR_SWPMI1SEL +/** + * @} + */ +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Filter0) +/** @defgroup RCCEx_DFSDM1_Clock_Source DFSDM1 Clock Source + * @{ + */ +#define RCC_DFSDM1CLKSOURCE_PCLK2 0x00000000U +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define RCC_DFSDM1CLKSOURCE_SYSCLK RCC_CCIPR2_DFSDM1SEL +#else +#define RCC_DFSDM1CLKSOURCE_SYSCLK RCC_CCIPR_DFSDM1SEL +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +/** + * @} + */ + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +/** @defgroup RCCEx_DFSDM1_Audio_Clock_Source DFSDM1 Audio Clock Source + * @{ + */ +#define RCC_DFSDM1AUDIOCLKSOURCE_SAI1 0x00000000U +#define RCC_DFSDM1AUDIOCLKSOURCE_HSI RCC_CCIPR2_ADFSDM1SEL_0 +#define RCC_DFSDM1AUDIOCLKSOURCE_MSI RCC_CCIPR2_ADFSDM1SEL_1 +/** + * @} + */ +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) +/** @defgroup RCCEx_LTDC_Clock_Source LTDC Clock Source + * @{ + */ +#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV2 0x00000000U +#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV4 RCC_CCIPR2_PLLSAI2DIVR_0 +#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV8 RCC_CCIPR2_PLLSAI2DIVR_1 +#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV16 RCC_CCIPR2_PLLSAI2DIVR +/** + * @} + */ +#endif /* LTDC */ + +#if defined(DSI) +/** @defgroup RCCEx_DSI_Clock_Source DSI Clock Source + * @{ + */ +#define RCC_DSICLKSOURCE_DSIPHY 0x00000000U +#define RCC_DSICLKSOURCE_PLLSAI2 RCC_CCIPR2_DSISEL +/** + * @} + */ +#endif /* DSI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) +/** @defgroup RCCEx_OSPI_Clock_Source OctoSPI Clock Source + * @{ + */ +#define RCC_OSPICLKSOURCE_SYSCLK 0x00000000U +#define RCC_OSPICLKSOURCE_MSI RCC_CCIPR2_OSPISEL_0 +#define RCC_OSPICLKSOURCE_PLL RCC_CCIPR2_OSPISEL_1 +/** + * @} + */ +#endif /* OCTOSPI1 || OCTOSPI2 */ + +/** @defgroup RCCEx_EXTI_LINE_LSECSS RCC LSE CSS external interrupt line + * @{ + */ +#define RCC_EXTI_LINE_LSECSS EXTI_IMR1_IM19 /*!< External interrupt line 19 connected to the LSE CSS EXTI Line */ +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_CRS_Status RCCEx CRS Status + * @{ + */ +#define RCC_CRS_NONE 0x00000000U +#define RCC_CRS_TIMEOUT 0x00000001U +#define RCC_CRS_SYNCOK 0x00000002U +#define RCC_CRS_SYNCWARN 0x00000004U +#define RCC_CRS_SYNCERR 0x00000008U +#define RCC_CRS_SYNCMISS 0x00000010U +#define RCC_CRS_TRIMOVF 0x00000020U +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS SynchroSource + * @{ + */ +#define RCC_CRS_SYNC_SOURCE_GPIO 0x00000000U /*!< Synchro Signal source GPIO */ +#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS SynchroDivider + * @{ + */ +#define RCC_CRS_SYNC_DIV1 0x00000000U /*!< Synchro Signal not divided (default) */ +#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS SynchroPolarity + * @{ + */ +#define RCC_CRS_SYNC_POLARITY_RISING 0x00000000U /*!< Synchro Active on rising edge (default) */ +#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS ReloadValueDefault + * @{ + */ +#define RCC_CRS_RELOADVALUE_DEFAULT 0x0000BB7FU /*!< The reset value of the RELOAD field corresponds + to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS ErrorLimitDefault + * @{ + */ +#define RCC_CRS_ERRORLIMIT_DEFAULT 0x00000022U /*!< Default Frequency error limit */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS HSI48CalibrationDefault + * @{ + */ +#if defined(STM32L412xx) || defined(STM32L422xx) +#define RCC_CRS_HSI48CALIBRATION_DEFAULT 0x00000040U /*!< The default value is 64, which corresponds to the middle of the trimming interval. + The trimming step is specified in the product datasheet. A higher TRIM value + corresponds to a higher output frequency */ +#else +#define RCC_CRS_HSI48CALIBRATION_DEFAULT 0x00000020U /*!< The default value is 32, which corresponds to the middle of the trimming interval. + The trimming step is specified in the product datasheet. A higher TRIM value + corresponds to a higher output frequency */ +#endif +/** + * @} + */ + +/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS FreqErrorDirection + * @{ + */ +#define RCC_CRS_FREQERRORDIR_UP 0x00000000U /*!< Upcounting direction, the actual frequency is above the target */ +#define RCC_CRS_FREQERRORDIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources + * @{ + */ +#define RCC_CRS_IT_SYNCOK CRS_CR_SYNCOKIE /*!< SYNC event OK */ +#define RCC_CRS_IT_SYNCWARN CRS_CR_SYNCWARNIE /*!< SYNC warning */ +#define RCC_CRS_IT_ERR CRS_CR_ERRIE /*!< Error */ +#define RCC_CRS_IT_ESYNC CRS_CR_ESYNCIE /*!< Expected SYNC */ +#define RCC_CRS_IT_SYNCERR CRS_CR_ERRIE /*!< SYNC error */ +#define RCC_CRS_IT_SYNCMISS CRS_CR_ERRIE /*!< SYNC missed */ +#define RCC_CRS_IT_TRIMOVF CRS_CR_ERRIE /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags + * @{ + */ +#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK flag */ +#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning flag */ +#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /*!< Error flag */ +#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC flag */ +#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */ +#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/ +#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */ + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ + +#if defined(RCC_PLLSAI1_SUPPORT) + +/** + * @brief Macro to configure the PLLSAI1 clock multiplication and division factors. + * + * @note This function must be used only when the PLLSAI1 is disabled. + * @note PLLSAI1 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + @if STM32L4S9xx + * @param __PLLSAI1M__ specifies the division factor of PLLSAI1 input clock. + * This parameter must be a number between Min_Data = 1 and Max_Data = 16. + * + @endif + * @param __PLLSAI1N__ specifies the multiplication factor for PLLSAI1 VCO output clock. + * This parameter must be a number between 8 and 86 or 127 depending on devices. + * @note You have to set the PLLSAI1N parameter correctly to ensure that the VCO + * output frequency is between 64 and 344 MHz. + * PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLSAI1N + * + * @param __PLLSAI1P__ specifies the division factor for SAI clock. + * This parameter must be a number in the range (7 or 17) for STM32L47xxx/L48xxx + * else (2 to 31). + * SAI1 clock frequency = f(PLLSAI1) / PLLSAI1P + * + * @param __PLLSAI1Q__ specifies the division factor for USB/RNG/SDMMC1 clock. + * This parameter must be in the range (2, 4, 6 or 8). + * USB/RNG/SDMMC1 clock frequency = f(PLLSAI1) / PLLSAI1Q + * + * @param __PLLSAI1R__ specifies the division factor for SAR ADC clock. + * This parameter must be in the range (2, 4, 6 or 8). + * ADC clock frequency = f(PLLSAI1) / PLLSAI1R + * + * @retval None + */ +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + +#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1M__, __PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, \ + (RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \ + RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R | RCC_PLLSAI1CFGR_PLLSAI1PDIV), \ + ((((__PLLSAI1M__) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos) | \ + ((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \ + ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \ + ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \ + ((uint32_t)(__PLLSAI1P__) << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos))) + +#else + +#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1M__, __PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, \ + (RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \ + RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R), \ + ((((__PLLSAI1M__) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos) | \ + ((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \ + ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \ + ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \ + (((__PLLSAI1P__) >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos))) + +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#else + +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + +#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, \ + (RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \ + RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R | RCC_PLLSAI1CFGR_PLLSAI1PDIV), \ + (((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \ + ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \ + ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \ + ((uint32_t)(__PLLSAI1P__) << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos))) + +#else + +#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, \ + (RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \ + RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R), \ + (((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \ + ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \ + ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \ + (((__PLLSAI1P__) >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos))) + +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + +/** + * @brief Macro to configure the PLLSAI1 clock multiplication factor N. + * + * @note This function must be used only when the PLLSAI1 is disabled. + * @note PLLSAI1 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI1N__ specifies the multiplication factor for PLLSAI1 VCO output clock. + * This parameter must be a number between 8 and 86 or 127 depending on devices. + * @note You have to set the PLLSAI1N parameter correctly to ensure that the VCO + * output frequency is between 64 and 344 MHz. + * Use to set PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLSAI1N + * + * @retval None + */ +#define __HAL_RCC_PLLSAI1_MULN_CONFIG(__PLLSAI1N__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N, (__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) + +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + +/** @brief Macro to configure the PLLSAI1 input clock division factor M. + * + * @note This function must be used only when the PLLSAI1 is disabled. + * @note PLLSAI1 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI1M__ specifies the division factor for PLLSAI1 clock. + * This parameter must be a number between Min_Data = 1 and Max_Data = 16. + * + * @retval None + */ + +#define __HAL_RCC_PLLSAI1_DIVM_CONFIG(__PLLSAI1M__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M, ((__PLLSAI1M__) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + +/** @brief Macro to configure the PLLSAI1 clock division factor P. + * + * @note This function must be used only when the PLLSAI1 is disabled. + * @note PLLSAI1 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI1P__ specifies the division factor for SAI clock. + * This parameter must be a number in the range (7 or 17) for STM32L47xxx/L48xxx + * else (2 to 31). + * Use to set SAI1 clock frequency = f(PLLSAI1) / PLLSAI1P + * + * @retval None + */ +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + +#define __HAL_RCC_PLLSAI1_DIVP_CONFIG(__PLLSAI1P__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV, (__PLLSAI1P__) << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos) + +#else + +#define __HAL_RCC_PLLSAI1_DIVP_CONFIG(__PLLSAI1P__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P, ((__PLLSAI1P__) >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos) + +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +/** @brief Macro to configure the PLLSAI1 clock division factor Q. + * + * @note This function must be used only when the PLLSAI1 is disabled. + * @note PLLSAI1 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI1Q__ specifies the division factor for USB/RNG/SDMMC1 clock. + * This parameter must be in the range (2, 4, 6 or 8). + * Use to set USB/RNG/SDMMC1 clock frequency = f(PLLSAI1) / PLLSAI1Q + * + * @retval None + */ +#define __HAL_RCC_PLLSAI1_DIVQ_CONFIG(__PLLSAI1Q__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q, (((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + +/** @brief Macro to configure the PLLSAI1 clock division factor R. + * + * @note This function must be used only when the PLLSAI1 is disabled. + * @note PLLSAI1 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI1R__ specifies the division factor for ADC clock. + * This parameter must be in the range (2, 4, 6 or 8) + * Use to set ADC clock frequency = f(PLLSAI1) / PLLSAI1R + * + * @retval None + */ +#define __HAL_RCC_PLLSAI1_DIVR_CONFIG(__PLLSAI1R__) \ + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R, (((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + +/** + * @brief Macros to enable or disable the PLLSAI1. + * @note The PLLSAI1 is disabled by hardware when entering STOP and STANDBY modes. + * @retval None + */ + +#define __HAL_RCC_PLLSAI1_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLSAI1ON) + +#define __HAL_RCC_PLLSAI1_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI1ON) + +/** + * @brief Macros to enable or disable each clock output (PLLSAI1_SAI1, PLLSAI1_USB2 and PLLSAI1_ADC1). + * @note Enabling and disabling those clocks can be done without the need to stop the PLL. + * This is mainly used to save Power. + * @param __PLLSAI1_CLOCKOUT__ specifies the PLLSAI1 clock to be output. + * This parameter can be one or a combination of the following values: + * @arg @ref RCC_PLLSAI1_SAI1CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI1_48M2CLK This clock is used to generate the clock for the USB OTG FS (48 MHz), + * the random number generator (<=48 MHz) and the SDIO (<= 48 MHz). + * @arg @ref RCC_PLLSAI1_ADC1CLK Clock used to clock ADC peripheral. + * @retval None + */ + +#define __HAL_RCC_PLLSAI1CLKOUT_ENABLE(__PLLSAI1_CLOCKOUT__) SET_BIT(RCC->PLLSAI1CFGR, (__PLLSAI1_CLOCKOUT__)) + +#define __HAL_RCC_PLLSAI1CLKOUT_DISABLE(__PLLSAI1_CLOCKOUT__) CLEAR_BIT(RCC->PLLSAI1CFGR, (__PLLSAI1_CLOCKOUT__)) + +/** + * @brief Macro to get clock output enable status (PLLSAI1_SAI1, PLLSAI1_USB2 and PLLSAI1_ADC1). + * @param __PLLSAI1_CLOCKOUT__ specifies the PLLSAI1 clock to be output. + * This parameter can be one of the following values: + * @arg @ref RCC_PLLSAI1_SAI1CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI1_48M2CLK This clock is used to generate the clock for the USB OTG FS (48 MHz), + * the random number generator (<=48 MHz) and the SDIO (<= 48 MHz). + * @arg @ref RCC_PLLSAI1_ADC1CLK Clock used to clock ADC peripheral. + * @retval SET / RESET + */ +#define __HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(__PLLSAI1_CLOCKOUT__) READ_BIT(RCC->PLLSAI1CFGR, (__PLLSAI1_CLOCKOUT__)) + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +/** + * @brief Macro to configure the PLLSAI2 clock multiplication and division factors. + * + * @note This function must be used only when the PLLSAI2 is disabled. + * @note PLLSAI2 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + @if STM32L4S9xx + * @param __PLLSAI2M__ specifies the division factor of PLLSAI2 input clock. + * This parameter must be a number between Min_Data = 1 and Max_Data = 16. + * + @endif + * @param __PLLSAI2N__ specifies the multiplication factor for PLLSAI2 VCO output clock. + * This parameter must be a number between 8 and 86. + * @note You have to set the PLLSAI2N parameter correctly to ensure that the VCO + * output frequency is between 64 and 344 MHz. + * + * @param __PLLSAI2P__ specifies the division factor for SAI clock. + * This parameter must be a number in the range (7 or 17) for STM32L47xxx/L48xxx + * else (2 to 31). + * SAI2 clock frequency = f(PLLSAI2) / PLLSAI2P + * + @if STM32L4S9xx + * @param __PLLSAI2Q__ specifies the division factor for DSI clock. + * This parameter must be in the range (2, 4, 6 or 8). + * DSI clock frequency = f(PLLSAI2) / PLLSAI2Q + * + @endif + * @param __PLLSAI2R__ specifies the division factor for SAR ADC clock. + * This parameter must be in the range (2, 4, 6 or 8). + * + * @retval None + */ + +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + +# if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) && defined(RCC_PLLSAI2Q_DIV_SUPPORT) + +#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__, __PLLSAI2Q__, __PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, \ + (RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ + RCC_PLLSAI2CFGR_PLLSAI2Q | RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \ + ((((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) | \ + ((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ + ((((__PLLSAI2Q__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) | \ + ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ + ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))) + +# elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) + +#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, \ + (RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ + RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \ + ((((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) | \ + ((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ + ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ + ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))) + +# else + +#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, \ + (RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ + RCC_PLLSAI2CFGR_PLLSAI2R), \ + ((((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) | \ + ((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ + ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ + (((__PLLSAI2P__) >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos))) + +# endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ + +#else + +# if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) && defined(RCC_PLLSAI2Q_DIV_SUPPORT) + +#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2N__, __PLLSAI2P__, __PLLSAI2Q__, __PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, \ + (RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ + RCC_PLLSAI2CFGR_PLLSAI2Q | RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \ + (((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ + ((((__PLLSAI2Q__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) | \ + ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ + ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))) + +# elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) + +#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, \ + (RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ + RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \ + (((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ + ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ + ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))) + +# else + +#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, \ + (RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \ + RCC_PLLSAI2CFGR_PLLSAI2R), \ + (((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \ + ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \ + (((__PLLSAI2P__) >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos))) + +# endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ + +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + + +/** + * @brief Macro to configure the PLLSAI2 clock multiplication factor N. + * + * @note This function must be used only when the PLLSAI2 is disabled. + * @note PLLSAI2 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI2N__ specifies the multiplication factor for PLLSAI2 VCO output clock. + * This parameter must be a number between 8 and 86. + * @note You have to set the PLLSAI2N parameter correctly to ensure that the VCO + * output frequency is between 64 and 344 MHz. + * PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLSAI2N + * + * @retval None + */ +#define __HAL_RCC_PLLSAI2_MULN_CONFIG(__PLLSAI2N__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N, (__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) + +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + +/** @brief Macro to configure the PLLSAI2 input clock division factor M. + * + * @note This function must be used only when the PLLSAI2 is disabled. + * @note PLLSAI2 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI2M__ specifies the division factor for PLLSAI2 clock. + * This parameter must be a number between Min_Data = 1 and Max_Data = 16. + * + * @retval None + */ + +#define __HAL_RCC_PLLSAI2_DIVM_CONFIG(__PLLSAI2M__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M, ((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + +/** @brief Macro to configure the PLLSAI2 clock division factor P. + * + * @note This function must be used only when the PLLSAI2 is disabled. + * @note PLLSAI2 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI2P__ specifies the division factor. + * This parameter must be a number in the range (7 or 17). + * Use to set SAI2 clock frequency = f(PLLSAI2) / __PLLSAI2P__ + * + * @retval None + */ +#define __HAL_RCC_PLLSAI2_DIVP_CONFIG(__PLLSAI2P__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P, ((__PLLSAI2P__) >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos) + +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) + +/** @brief Macro to configure the PLLSAI2 clock division factor Q. + * + * @note This function must be used only when the PLLSAI2 is disabled. + * @note PLLSAI2 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI2Q__ specifies the division factor for USB/RNG/SDMMC1 clock. + * This parameter must be in the range (2, 4, 6 or 8). + * Use to set USB/RNG/SDMMC1 clock frequency = f(PLLSAI2) / PLLSAI2Q + * + * @retval None + */ +#define __HAL_RCC_PLLSAI2_DIVQ_CONFIG(__PLLSAI2Q__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2Q, (((__PLLSAI2Q__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) + +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ + +/** @brief Macro to configure the PLLSAI2 clock division factor R. + * + * @note This function must be used only when the PLLSAI2 is disabled. + * @note PLLSAI2 clock source is common with the main PLL (configured through + * __HAL_RCC_PLL_CONFIG() macro) + * + * @param __PLLSAI2R__ specifies the division factor. + * This parameter must be in the range (2, 4, 6 or 8). + * Use to set ADC clock frequency = f(PLLSAI2) / __PLLSAI2R__ + * + * @retval None + */ +#define __HAL_RCC_PLLSAI2_DIVR_CONFIG(__PLLSAI2R__) \ + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R, (((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) + +/** + * @brief Macros to enable or disable the PLLSAI2. + * @note The PLLSAI2 is disabled by hardware when entering STOP and STANDBY modes. + * @retval None + */ + +#define __HAL_RCC_PLLSAI2_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLSAI2ON) + +#define __HAL_RCC_PLLSAI2_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI2ON) + +/** + * @brief Macros to enable or disable each clock output (PLLSAI2_SAI2, PLLSAI2_ADC2 and RCC_PLLSAI2_DSICLK). + * @note Enabling and disabling those clocks can be done without the need to stop the PLL. + * This is mainly used to save Power. + * @param __PLLSAI2_CLOCKOUT__ specifies the PLLSAI2 clock to be output. + * This parameter can be one or a combination of the following values: + @if STM32L486xx + * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral. + @endif + @if STM32L4A6xx + * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral. + @endif + @if STM32L4S9xx + * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI2_DSICLK Clock used to clock DSI peripheral. + @endif + * @retval None + */ + +#define __HAL_RCC_PLLSAI2CLKOUT_ENABLE(__PLLSAI2_CLOCKOUT__) SET_BIT(RCC->PLLSAI2CFGR, (__PLLSAI2_CLOCKOUT__)) + +#define __HAL_RCC_PLLSAI2CLKOUT_DISABLE(__PLLSAI2_CLOCKOUT__) CLEAR_BIT(RCC->PLLSAI2CFGR, (__PLLSAI2_CLOCKOUT__)) + +/** + * @brief Macro to get clock output enable status (PLLSAI2_SAI2, PLLSAI2_ADC2 and RCC_PLLSAI2_DSICLK). + * @param __PLLSAI2_CLOCKOUT__ specifies the PLLSAI2 clock to be output. + * This parameter can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral. + @endif + @if STM32L4A6xx + * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral. + @endif + @if STM32L4S9xx + * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve + * high-quality audio performance on SAI interface in case. + * @arg @ref RCC_PLLSAI2_DSICLK Clock used to clock DSI peripheral. + @endif + * @retval SET / RESET + */ +#define __HAL_RCC_GET_PLLSAI2CLKOUT_CONFIG(__PLLSAI2_CLOCKOUT__) READ_BIT(RCC->PLLSAI2CFGR, (__PLLSAI2_CLOCKOUT__)) + +#endif /* RCC_PLLSAI2_SUPPORT */ + +#if defined(SAI1) + +/** + * @brief Macro to configure the SAI1 clock source. + * @param __SAI1_CLKSOURCE__ defines the SAI1 clock source. This clock is derived + * from the PLLSAI1, system PLL or external clock (through a dedicated pin). + * This parameter can be one of the following values: + * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI1 SAI1 clock = PLLSAI1 "P" clock (PLLSAI1CLK) + @if STM32L486xx + * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI2 SAI1 clock = PLLSAI2 "P" clock (PLLSAI2CLK) for devices with PLLSAI2 + @endif + * @arg @ref RCC_SAI1CLKSOURCE_PLL SAI1 clock = PLL "P" clock (PLLSAI3CLK if PLLSAI2 exists, else PLLSAI2CLK) + * @arg @ref RCC_SAI1CLKSOURCE_PIN SAI1 clock = External Clock (SAI1_EXTCLK) + @if STM32L4S9xx + * @arg @ref RCC_SAI1CLKSOURCE_HSI SAI1 clock = HSI16 + @endif + * + @if STM32L443xx + * @note HSI16 is automatically set as SAI1 clock source when PLL are disabled for devices without PLLSAI2. + @endif + * + * @retval None + */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define __HAL_RCC_SAI1_CONFIG(__SAI1_CLKSOURCE__)\ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SAI1SEL, (__SAI1_CLKSOURCE__)) +#else +#define __HAL_RCC_SAI1_CONFIG(__SAI1_CLKSOURCE__)\ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SAI1SEL, (__SAI1_CLKSOURCE__)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** @brief Macro to get the SAI1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI1 SAI1 clock = PLLSAI1 "P" clock (PLLSAI1CLK) + @if STM32L486xx + * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI2 SAI1 clock = PLLSAI2 "P" clock (PLLSAI2CLK) for devices with PLLSAI2 + @endif + * @arg @ref RCC_SAI1CLKSOURCE_PLL SAI1 clock = PLL "P" clock (PLLSAI3CLK if PLLSAI2 exists, else PLLSAI2CLK) + * @arg @ref RCC_SAI1CLKSOURCE_PIN SAI1 clock = External Clock (SAI1_EXTCLK) + * + * @note Despite returned values RCC_SAI1CLKSOURCE_PLLSAI1 or RCC_SAI1CLKSOURCE_PLL, HSI16 is automatically set as SAI1 + * clock source when PLLs are disabled for devices without PLLSAI2. + * + */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SAI1SEL)) +#else +#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_SAI1SEL)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* SAI1 */ + +#if defined(SAI2) + +/** + * @brief Macro to configure the SAI2 clock source. + * @param __SAI2_CLKSOURCE__ defines the SAI2 clock source. This clock is derived + * from the PLLSAI2, system PLL or external clock (through a dedicated pin). + * This parameter can be one of the following values: + * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI1 SAI2 clock = PLLSAI1 "P" clock (PLLSAI1CLK) + * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI2 SAI2 clock = PLLSAI2 "P" clock (PLLSAI2CLK) + * @arg @ref RCC_SAI2CLKSOURCE_PLL SAI2 clock = PLL "P" clock (PLLSAI3CLK) + * @arg @ref RCC_SAI2CLKSOURCE_PIN SAI2 clock = External Clock (SAI2_EXTCLK) + @if STM32L4S9xx + * @arg @ref RCC_SAI2CLKSOURCE_HSI SAI2 clock = HSI16 + @endif + * + * @retval None + */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define __HAL_RCC_SAI2_CONFIG(__SAI2_CLKSOURCE__ )\ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SAI2SEL, (__SAI2_CLKSOURCE__)) +#else +#define __HAL_RCC_SAI2_CONFIG(__SAI2_CLKSOURCE__ )\ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SAI2SEL, (__SAI2_CLKSOURCE__)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** @brief Macro to get the SAI2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI1 SAI2 clock = PLLSAI1 "P" clock (PLLSAI1CLK) + * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI2 SAI2 clock = PLLSAI2 "P" clock (PLLSAI2CLK) + * @arg @ref RCC_SAI2CLKSOURCE_PLL SAI2 clock = PLL "P" clock (PLLSAI3CLK) + * @arg @ref RCC_SAI2CLKSOURCE_PIN SAI2 clock = External Clock (SAI2_EXTCLK) + */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SAI2SEL)) +#else +#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_SAI2SEL)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* SAI2 */ + +/** @brief Macro to configure the I2C1 clock (I2C1CLK). + * + * @param __I2C1_CLKSOURCE__ specifies the I2C1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_PCLK1 PCLK1 selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + * @retval None + */ +#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C1SEL, (__I2C1_CLKSOURCE__)) + +/** @brief Macro to get the I2C1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C1CLKSOURCE_PCLK1 PCLK1 selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock + * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock + */ +#define __HAL_RCC_GET_I2C1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C1SEL)) + +#if defined(I2C2) + +/** @brief Macro to configure the I2C2 clock (I2C2CLK). + * + * @param __I2C2_CLKSOURCE__ specifies the I2C2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C2CLKSOURCE_PCLK1 PCLK1 selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock + * @retval None + */ +#define __HAL_RCC_I2C2_CONFIG(__I2C2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C2SEL, (__I2C2_CLKSOURCE__)) + +/** @brief Macro to get the I2C2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C2CLKSOURCE_PCLK1 PCLK1 selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock + * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock + */ +#define __HAL_RCC_GET_I2C2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C2SEL)) + +#endif /* I2C2 */ + +/** @brief Macro to configure the I2C3 clock (I2C3CLK). + * + * @param __I2C3_CLKSOURCE__ specifies the I2C3 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C3CLKSOURCE_PCLK1 PCLK1 selected as I2C3 clock + * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock + * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock + * @retval None + */ +#define __HAL_RCC_I2C3_CONFIG(__I2C3_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C3SEL, (__I2C3_CLKSOURCE__)) + +/** @brief Macro to get the I2C3 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C3CLKSOURCE_PCLK1 PCLK1 selected as I2C3 clock + * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock + * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock + */ +#define __HAL_RCC_GET_I2C3_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C3SEL)) + +#if defined(I2C4) + +/** @brief Macro to configure the I2C4 clock (I2C4CLK). + * + * @param __I2C4_CLKSOURCE__ specifies the I2C4 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_I2C4CLKSOURCE_PCLK1 PCLK1 selected as I2C4 clock + * @arg @ref RCC_I2C4CLKSOURCE_HSI HSI selected as I2C4 clock + * @arg @ref RCC_I2C4CLKSOURCE_SYSCLK System Clock selected as I2C4 clock + * @retval None + */ +#define __HAL_RCC_I2C4_CONFIG(__I2C4_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2C4SEL, (__I2C4_CLKSOURCE__)) + +/** @brief Macro to get the I2C4 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_I2C4CLKSOURCE_PCLK1 PCLK1 selected as I2C4 clock + * @arg @ref RCC_I2C4CLKSOURCE_HSI HSI selected as I2C4 clock + * @arg @ref RCC_I2C4CLKSOURCE_SYSCLK System Clock selected as I2C4 clock + */ +#define __HAL_RCC_GET_I2C4_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2C4SEL)) + +#endif /* I2C4 */ + + +/** @brief Macro to configure the USART1 clock (USART1CLK). + * + * @param __USART1_CLKSOURCE__ specifies the USART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE SE selected as USART1 clock + * @retval None + */ +#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART1SEL, (__USART1_CLKSOURCE__)) + +/** @brief Macro to get the USART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock + * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock + */ +#define __HAL_RCC_GET_USART1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_USART1SEL)) + +/** @brief Macro to configure the USART2 clock (USART2CLK). + * + * @param __USART2_CLKSOURCE__ specifies the USART2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + * @retval None + */ +#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART2SEL, (__USART2_CLKSOURCE__)) + +/** @brief Macro to get the USART2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock + * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock + */ +#define __HAL_RCC_GET_USART2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_USART2SEL)) + +#if defined(USART3) + +/** @brief Macro to configure the USART3 clock (USART3CLK). + * + * @param __USART3_CLKSOURCE__ specifies the USART3 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + * @retval None + */ +#define __HAL_RCC_USART3_CONFIG(__USART3_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART3SEL, (__USART3_CLKSOURCE__)) + +/** @brief Macro to get the USART3 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock + * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock + */ +#define __HAL_RCC_GET_USART3_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_USART3SEL)) + +#endif /* USART3 */ + +#if defined(UART4) + +/** @brief Macro to configure the UART4 clock (UART4CLK). + * + * @param __UART4_CLKSOURCE__ specifies the UART4 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_UART4CLKSOURCE_PCLK1 PCLK1 selected as UART4 clock + * @arg @ref RCC_UART4CLKSOURCE_HSI HSI selected as UART4 clock + * @arg @ref RCC_UART4CLKSOURCE_SYSCLK System Clock selected as UART4 clock + * @arg @ref RCC_UART4CLKSOURCE_LSE LSE selected as UART4 clock + * @retval None + */ +#define __HAL_RCC_UART4_CONFIG(__UART4_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_UART4SEL, (__UART4_CLKSOURCE__)) + +/** @brief Macro to get the UART4 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_UART4CLKSOURCE_PCLK1 PCLK1 selected as UART4 clock + * @arg @ref RCC_UART4CLKSOURCE_HSI HSI selected as UART4 clock + * @arg @ref RCC_UART4CLKSOURCE_SYSCLK System Clock selected as UART4 clock + * @arg @ref RCC_UART4CLKSOURCE_LSE LSE selected as UART4 clock + */ +#define __HAL_RCC_GET_UART4_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_UART4SEL)) + +#endif /* UART4 */ + +#if defined(UART5) + +/** @brief Macro to configure the UART5 clock (UART5CLK). + * + * @param __UART5_CLKSOURCE__ specifies the UART5 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_UART5CLKSOURCE_PCLK1 PCLK1 selected as UART5 clock + * @arg @ref RCC_UART5CLKSOURCE_HSI HSI selected as UART5 clock + * @arg @ref RCC_UART5CLKSOURCE_SYSCLK System Clock selected as UART5 clock + * @arg @ref RCC_UART5CLKSOURCE_LSE LSE selected as UART5 clock + * @retval None + */ +#define __HAL_RCC_UART5_CONFIG(__UART5_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_UART5SEL, (__UART5_CLKSOURCE__)) + +/** @brief Macro to get the UART5 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_UART5CLKSOURCE_PCLK1 PCLK1 selected as UART5 clock + * @arg @ref RCC_UART5CLKSOURCE_HSI HSI selected as UART5 clock + * @arg @ref RCC_UART5CLKSOURCE_SYSCLK System Clock selected as UART5 clock + * @arg @ref RCC_UART5CLKSOURCE_LSE LSE selected as UART5 clock + */ +#define __HAL_RCC_GET_UART5_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_UART5SEL)) + +#endif /* UART5 */ + +/** @brief Macro to configure the LPUART1 clock (LPUART1CLK). + * + * @param __LPUART1_CLKSOURCE__ specifies the LPUART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock + * @retval None + */ +#define __HAL_RCC_LPUART1_CONFIG(__LPUART1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, (__LPUART1_CLKSOURCE__)) + +/** @brief Macro to get the LPUART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock + * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_GET_LPUART1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_LPUART1SEL)) + +/** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK). + * + * @param __LPTIM1_CLKSOURCE__ specifies the LPTIM1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_HSI LSI selected as LPTIM1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPTIM1 clock + * @retval None + */ +#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL, (__LPTIM1_CLKSOURCE__)) + +/** @brief Macro to get the LPTIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_HSI System Clock selected as LPUART1 clock + * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL)) + +/** @brief Macro to configure the LPTIM2 clock (LPTIM2CLK). + * + * @param __LPTIM2_CLKSOURCE__ specifies the LPTIM2 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_HSI LSI selected as LPTIM2 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPTIM2 clock + * @retval None + */ +#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL, (__LPTIM2_CLKSOURCE__)) + +/** @brief Macro to get the LPTIM2 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPUART1 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_HSI System Clock selected as LPUART1 clock + * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPUART1 clock + */ +#define __HAL_RCC_GET_LPTIM2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL)) + +#if defined(SDMMC1) + +/** @brief Macro to configure the SDMMC1 clock. + * + @if STM32L486xx + * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source. + @endif + * + @if STM32L443xx + * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source. + @endif + * + * @param __SDMMC1_CLKSOURCE__ specifies the SDMMC1 clock source. + * This parameter can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_SDMMC1CLKSOURCE_NONE No clock selected as SDMMC1 clock for devices without HSI48 + * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" Clock selected as SDMMC1 clock + @endif + @if STM32L443xx + * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48 + * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" Clock selected as SDMMC1 clock + @endif + @if STM32L4S9xx + * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48 + * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" Clock selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLP PLL "P" Clock selected as SDMMC1 clock + @endif + * @arg @ref RCC_SDMMC1CLKSOURCE_PLL PLL "Q" Clock selected as SDMMC1 clock + * @retval None + */ +#if defined(RCC_CCIPR2_SDMMCSEL) +#define __HAL_RCC_SDMMC1_CONFIG(__SDMMC1_CLKSOURCE__) \ + do \ + { \ + if((__SDMMC1_CLKSOURCE__) == RCC_SDMMC1CLKSOURCE_PLLP) \ + { \ + SET_BIT(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL); \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__SDMMC1_CLKSOURCE__)); \ + } \ + } while(0) +#else +#define __HAL_RCC_SDMMC1_CONFIG(__SDMMC1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__SDMMC1_CLKSOURCE__)) +#endif /* RCC_CCIPR2_SDMMCSEL */ + +/** @brief Macro to get the SDMMC1 clock. + * @retval The clock source can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_SDMMC1CLKSOURCE_NONE No clock selected as SDMMC1 clock for devices without HSI48 + * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as SDMMC1 clock + @endif + @if STM32L443xx + * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48 + * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as SDMMC1 clock + @endif + @if STM32L4S9xx + * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48 + * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as SDMMC1 clock + * @arg @ref RCC_SDMMC1CLKSOURCE_PLLP PLL "P" clock (PLLSAI3CLK) selected as SDMMC1 kernel clock + @endif + * @arg @ref RCC_SDMMC1CLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as SDMMC1 clock + */ +#if defined(RCC_CCIPR2_SDMMCSEL) +#define __HAL_RCC_GET_SDMMC1_SOURCE() \ + ((READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL) != 0U) ? RCC_SDMMC1CLKSOURCE_PLLP : (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL))) +#else +#define __HAL_RCC_GET_SDMMC1_SOURCE() \ + (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL)) +#endif /* RCC_CCIPR2_SDMMCSEL */ + +#endif /* SDMMC1 */ + +/** @brief Macro to configure the RNG clock. + * + * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source. + * + * @param __RNG_CLKSOURCE__ specifies the RNG clock source. + * This parameter can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock for devices without HSI48 + @endif + @if STM32L443xx + * @arg @ref RCC_RNGCLKSOURCE_HSI48 HSI48 selected as RNG clock clock for devices with HSI48 + @endif + * @arg @ref RCC_RNGCLKSOURCE_MSI MSI selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLL PLL Clock selected as RNG clock + * @retval None + */ +#define __HAL_RCC_RNG_CONFIG(__RNG_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__RNG_CLKSOURCE__)) + +/** @brief Macro to get the RNG clock. + * @retval The clock source can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock for devices without HSI48 + @endif + @if STM32L443xx + * @arg @ref RCC_RNGCLKSOURCE_HSI48 HSI48 selected as RNG clock clock for devices with HSI48 + @endif + * @arg @ref RCC_RNGCLKSOURCE_MSI MSI selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as RNG clock + * @arg @ref RCC_RNGCLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as RNG clock + */ +#define __HAL_RCC_GET_RNG_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL)) + +#if defined(USB_OTG_FS) || defined(USB) + +/** @brief Macro to configure the USB clock (USBCLK). + * + * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source. + * + * @param __USB_CLKSOURCE__ specifies the USB clock source. + * This parameter can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_USBCLKSOURCE_NONE No clock selected as 48MHz clock for devices without HSI48 + @endif + @if STM32L443xx + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as 48MHz clock for devices with HSI48 + @endif + * @arg @ref RCC_USBCLKSOURCE_MSI MSI selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as USB clock + * @retval None + */ +#define __HAL_RCC_USB_CONFIG(__USB_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__USB_CLKSOURCE__)) + +/** @brief Macro to get the USB clock source. + * @retval The clock source can be one of the following values: + @if STM32L486xx + * @arg @ref RCC_USBCLKSOURCE_NONE No clock selected as 48MHz clock for devices without HSI48 + @endif + @if STM32L443xx + * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as 48MHz clock for devices with HSI48 + @endif + * @arg @ref RCC_USBCLKSOURCE_MSI MSI selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as USB clock + * @arg @ref RCC_USBCLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as USB clock + */ +#define __HAL_RCC_GET_USB_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL)) + +#endif /* USB_OTG_FS || USB */ + +#if defined(RCC_CCIPR_ADCSEL) + +/** @brief Macro to configure the ADC interface clock. + * @param __ADC_CLKSOURCE__ specifies the ADC digital interface clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as ADC clock + @if STM32L486xx + * @arg @ref RCC_ADCCLKSOURCE_PLLSAI2 PLLSAI2 Clock selected as ADC clock for STM32L47x/STM32L48x/STM32L49x/STM32L4Ax devices + @endif + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + * @retval None + */ +#define __HAL_RCC_ADC_CONFIG(__ADC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, (__ADC_CLKSOURCE__)) + +/** @brief Macro to get the ADC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as ADC clock + @if STM32L486xx + * @arg @ref RCC_ADCCLKSOURCE_PLLSAI2 PLLSAI2 Clock selected as ADC clock for STM32L47x/STM32L48x/STM32L49x/STM32L4Ax devices + @endif + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + */ +#define __HAL_RCC_GET_ADC_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_ADCSEL)) +#else + +/** @brief Macro to get the ADC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock + * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock + */ +#define __HAL_RCC_GET_ADC_SOURCE() ((__HAL_RCC_ADC_IS_CLK_ENABLED() != 0U) ? RCC_ADCCLKSOURCE_SYSCLK : RCC_ADCCLKSOURCE_NONE) + +#endif /* RCC_CCIPR_ADCSEL */ + +#if defined(SWPMI1) + +/** @brief Macro to configure the SWPMI1 clock. + * @param __SWPMI1_CLKSOURCE__ specifies the SWPMI1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SWPMI1CLKSOURCE_PCLK1 PCLK1 Clock selected as SWPMI1 clock + * @arg @ref RCC_SWPMI1CLKSOURCE_HSI HSI Clock selected as SWPMI1 clock + * @retval None + */ +#define __HAL_RCC_SWPMI1_CONFIG(__SWPMI1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SWPMI1SEL, (__SWPMI1_CLKSOURCE__)) + +/** @brief Macro to get the SWPMI1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_SWPMI1CLKSOURCE_PCLK1 PCLK1 Clock selected as SWPMI1 clock + * @arg @ref RCC_SWPMI1CLKSOURCE_HSI HSI Clock selected as SWPMI1 clock + */ +#define __HAL_RCC_GET_SWPMI1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_SWPMI1SEL)) + +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Filter0) +/** @brief Macro to configure the DFSDM1 clock. + * @param __DFSDM1_CLKSOURCE__ specifies the DFSDM1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_DFSDM1CLKSOURCE_PCLK2 PCLK2 Clock selected as DFSDM1 clock + * @arg @ref RCC_DFSDM1CLKSOURCE_SYSCLK System Clock selected as DFSDM1 clock + * @retval None + */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DFSDM1SEL, (__DFSDM1_CLKSOURCE__)) +#else +#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_DFSDM1SEL, (__DFSDM1_CLKSOURCE__)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** @brief Macro to get the DFSDM1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_DFSDM1CLKSOURCE_PCLK2 PCLK2 Clock selected as DFSDM1 clock + * @arg @ref RCC_DFSDM1CLKSOURCE_SYSCLK System Clock selected as DFSDM1 clock + */ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define __HAL_RCC_GET_DFSDM1_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_DFSDM1SEL)) +#else +#define __HAL_RCC_GET_DFSDM1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_DFSDM1SEL)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + +/** @brief Macro to configure the DFSDM1 audio clock. + * @param __DFSDM1AUDIO_CLKSOURCE__ specifies the DFSDM1 audio clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_SAI1 SAI1 clock selected as DFSDM1 audio clock + * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_HSI HSI clock selected as DFSDM1 audio clock + * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_MSI MSI clock selected as DFSDM1 audio clock + * @retval None + */ +#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__DFSDM1AUDIO_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_ADFSDM1SEL, (__DFSDM1AUDIO_CLKSOURCE__)) + +/** @brief Macro to get the DFSDM1 audio clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_SAI1 SAI1 clock selected as DFSDM1 audio clock + * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_HSI HSI clock selected as DFSDM1 audio clock + * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_MSI MSI clock selected as DFSDM1 audio clock + */ +#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_ADFSDM1SEL)) + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) + +/** @brief Macro to configure the LTDC clock. + * @param __LTDC_CLKSOURCE__ specifies the LTDC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV2 PLLSAI2 divider R divided by 2 clock selected as LTDC clock + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV4 PLLSAI2 divider R divided by 4 clock selected as LTDC clock + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV8 PLLSAI2 divider R divided by 8 clock selected as LTDC clock + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV16 PLLSAI2 divider R divided by 16 clock selected as LTDC clock + * @retval None + */ +#define __HAL_RCC_LTDC_CONFIG(__LTDC_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR, (__LTDC_CLKSOURCE__)) + +/** @brief Macro to get the LTDC clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV2 PLLSAI2 divider R divided by 2 clock selected as LTDC clock + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV4 PLLSAI2 divider R divided by 4 clock selected as LTDC clock + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV8 PLLSAI2 divider R divided by 8 clock selected as LTDC clock + * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV16 PLLSAI2 divider R divided by 16 clock selected as LTDC clock + */ +#define __HAL_RCC_GET_LTDC_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR)) + +#endif /* LTDC */ + +#if defined(DSI ) + +/** @brief Macro to configure the DSI clock. + * @param __DSI_CLKSOURCE__ specifies the DSI clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_DSICLKSOURCE_DSIPHY DSI-PHY clock selected as DSI clock + * @arg @ref RCC_DSICLKSOURCE_PLLSAI2 PLLSAI2 R divider clock selected as DSI clock + * @retval None + */ +#define __HAL_RCC_DSI_CONFIG(__DSI_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DSISEL, (__DSI_CLKSOURCE__)) + +/** @brief Macro to get the DSI clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_DSICLKSOURCE_DSIPHY DSI-PHY clock selected as DSI clock + * @arg @ref RCC_DSICLKSOURCE_PLLSAI2 PLLSAI2 R divider clock selected as DSI clock + */ +#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_DSISEL)) + +#endif /* DSI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + +/** @brief Macro to configure the OctoSPI clock. + * @param __OSPI_CLKSOURCE__ specifies the OctoSPI clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_OSPICLKSOURCE_SYSCLK System Clock selected as OctoSPI clock + * @arg @ref RCC_OSPICLKSOURCE_MSI MSI clock selected as OctoSPI clock + * @arg @ref RCC_OSPICLKSOURCE_PLL PLL Q divider clock selected as OctoSPI clock + * @retval None + */ +#define __HAL_RCC_OSPI_CONFIG(__OSPI_CLKSOURCE__) \ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_OSPISEL, (__OSPI_CLKSOURCE__)) + +/** @brief Macro to get the OctoSPI clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_OSPICLKSOURCE_SYSCLK System Clock selected as OctoSPI clock + * @arg @ref RCC_OSPICLKSOURCE_MSI MSI clock selected as OctoSPI clock + * @arg @ref RCC_OSPICLKSOURCE_PLL PLL Q divider clock selected as OctoSPI clock + */ +#define __HAL_RCC_GET_OSPI_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_OSPISEL)) + +#endif /* OCTOSPI1 || OCTOSPI2 */ + +/** @defgroup RCCEx_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ +#if defined(RCC_PLLSAI1_SUPPORT) + +/** @brief Enable PLLSAI1RDY interrupt. + * @retval None + */ +#define __HAL_RCC_PLLSAI1_ENABLE_IT() SET_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE) + +/** @brief Disable PLLSAI1RDY interrupt. + * @retval None + */ +#define __HAL_RCC_PLLSAI1_DISABLE_IT() CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE) + +/** @brief Clear the PLLSAI1RDY interrupt pending bit. + * @retval None + */ +#define __HAL_RCC_PLLSAI1_CLEAR_IT() WRITE_REG(RCC->CICR, RCC_CICR_PLLSAI1RDYC) + +/** @brief Check whether PLLSAI1RDY interrupt has occurred or not. + * @retval TRUE or FALSE. + */ +#define __HAL_RCC_PLLSAI1_GET_IT_SOURCE() (READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI1RDYF) == RCC_CIFR_PLLSAI1RDYF) + +/** @brief Check whether the PLLSAI1RDY flag is set or not. + * @retval TRUE or FALSE. + */ +#define __HAL_RCC_PLLSAI1_GET_FLAG() (READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == (RCC_CR_PLLSAI1RDY)) + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +/** @brief Enable PLLSAI2RDY interrupt. + * @retval None + */ +#define __HAL_RCC_PLLSAI2_ENABLE_IT() SET_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE) + +/** @brief Disable PLLSAI2RDY interrupt. + * @retval None + */ +#define __HAL_RCC_PLLSAI2_DISABLE_IT() CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE) + +/** @brief Clear the PLLSAI2RDY interrupt pending bit. + * @retval None + */ +#define __HAL_RCC_PLLSAI2_CLEAR_IT() WRITE_REG(RCC->CICR, RCC_CICR_PLLSAI2RDYC) + +/** @brief Check whether the PLLSAI2RDY interrupt has occurred or not. + * @retval TRUE or FALSE. + */ +#define __HAL_RCC_PLLSAI2_GET_IT_SOURCE() (READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI2RDYF) == RCC_CIFR_PLLSAI2RDYF) + +/** @brief Check whether the PLLSAI2RDY flag is set or not. + * @retval TRUE or FALSE. + */ +#define __HAL_RCC_PLLSAI2_GET_FLAG() (READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == (RCC_CR_PLLSAI2RDY)) + +#endif /* RCC_PLLSAI2_SUPPORT */ + + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Line. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Line. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Event Line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Event Line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Check whether the specified RCC LSE CSS EXTI interrupt flag is set or not. + * @retval EXTI RCC LSE CSS Line Status. + */ +#define __HAL_RCC_LSECSS_EXTI_GET_FLAG() (READ_BIT(EXTI->PR1, RCC_EXTI_LINE_LSECSS) == RCC_EXTI_LINE_LSECSS) + +/** + * @brief Clear the RCC LSE CSS EXTI flag. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Generate a Software interrupt on the RCC LSE CSS EXTI line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, RCC_EXTI_LINE_LSECSS) + + +#if defined(CRS) + +/** + * @brief Enable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__)) + +/** + * @brief Disable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__)) + +/** @brief Check whether the CRS interrupt has occurred or not. + * @param __INTERRUPT__ specifies the CRS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != 0U) ? SET : RESET) + +/** @brief Clear the CRS interrupt pending bits + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt + * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt + * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt + */ +/* CRS IT Error Mask */ +#define RCC_CRS_IT_ERROR_MASK (RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS) + +#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \ + if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__INTERRUPT__)); \ + } \ + } while(0) + +/** + * @brief Check whether the specified CRS flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @retval The new state of _FLAG_ (TRUE or FALSE). + */ +#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the CRS specified FLAG. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR + * @retval None + */ + +/* CRS Flag Error Mask */ +#define RCC_CRS_FLAG_ERROR_MASK (RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS) + +#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \ + if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__FLAG__)); \ + } \ + } while(0) + +#endif /* CRS */ + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features + * @{ + */ +/** + * @brief Enable the oscillator clock for frequency error counter. + * @note when the CEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Disable the oscillator clock for frequency error counter. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Enable the automatic hardware adjustment of TRIM bits. + * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Enable or disable the automatic hardware adjustment of TRIM bits. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency + * of the synchronization source after prescaling. It is then decreased by one in order to + * reach the expected synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval None + */ +#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +#endif /* CRS */ + +#if defined(PSSI) + +/** @defgroup RCCEx_PSSI_Macros_Aliases RCCEx PSSI Macros Aliases + * @{ + */ + +#define __HAL_RCC_PSSI_CLK_ENABLE() __HAL_RCC_DCMI_CLK_ENABLE() + +#define __HAL_RCC_PSSI_CLK_DISABLE() __HAL_RCC_DCMI_CLK_DISABLE() + +#define __HAL_RCC_PSSI_IS_CLK_ENABLED() __HAL_RCC_DCMI_IS_CLK_ENABLED() + +#define __HAL_RCC_PSSI_IS_CLK_DISABLED() __HAL_RCC_DCMI_IS_CLK_DISABLED() + +#define __HAL_RCC_PSSI_FORCE_RESET() __HAL_RCC_DCMI_FORCE_RESET() + +#define __HAL_RCC_PSSI_RELEASE_RESET() __HAL_RCC_DCMI_RELEASE_RESET() + +#define __HAL_RCC_PSSI_CLK_SLEEP_ENABLE() __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() + +#define __HAL_RCC_PSSI_CLK_SLEEP_DISABLE() __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() + +#define __HAL_RCC_PSSI_IS_CLK_SLEEP_ENABLED() __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() + +#define __HAL_RCC_PSSI_IS_CLK_SLEEP_DISABLED() __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() + +/** + * @} + */ + +#endif /* PSSI */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); + +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group2 + * @{ + */ +#if defined(RCC_PLLSAI1_SUPPORT) + +HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI1(RCC_PLLSAI1InitTypeDef *PLLSAI1Init); +HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI1(void); + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI2(RCC_PLLSAI2InitTypeDef *PLLSAI2Init); +HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI2(void); + +#endif /* RCC_PLLSAI2_SUPPORT */ + +void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk); +void HAL_RCCEx_StandbyMSIRangeConfig(uint32_t MSIRange); +void HAL_RCCEx_EnableLSECSS(void); +void HAL_RCCEx_DisableLSECSS(void); +void HAL_RCCEx_EnableLSECSS_IT(void); +void HAL_RCCEx_LSECSS_IRQHandler(void); +void HAL_RCCEx_LSECSS_Callback(void); +void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource); +void HAL_RCCEx_DisableLSCO(void); +void HAL_RCCEx_EnableMSIPLLMode(void); +void HAL_RCCEx_DisableMSIPLLMode(void); +#if defined (OCTOSPI1) && defined (OCTOSPI2) +void HAL_RCCEx_OCTOSPIDelayConfig(uint32_t Delay1, uint32_t Delay2); +#endif /* OCTOSPI1 && OCTOSPI2 */ + +/** + * @} + */ + +#if defined(CRS) + +/** @addtogroup RCCEx_Exported_Functions_Group3 + * @{ + */ + +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit); +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void); +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo); +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout); +void HAL_RCCEx_CRS_IRQHandler(void); +void HAL_RCCEx_CRS_SyncOkCallback(void); +void HAL_RCCEx_CRS_SyncWarnCallback(void); +void HAL_RCCEx_CRS_ExpectedSyncCallback(void); +void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup RCCEx_Private_Constants + * @{ + */ +/* Define used for IS_RCC_* macros below */ +#if defined(STM32L412xx) || defined(STM32L422xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_USB | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_RTC | \ + RCC_PERIPHCLK_RNG) +#elif defined(STM32L431xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#elif defined(STM32L432xx) || defined(STM32L442xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_USB | RCC_PERIPHCLK_ADC | \ + RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG) +#elif defined(STM32L433xx) || defined(STM32L443xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_USB | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#elif defined(STM32L451xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\ + RCC_PERIPHCLK_UART4 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#elif defined(STM32L452xx) || defined(STM32L462xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 |\ + RCC_PERIPHCLK_UART4 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_USB | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#elif defined(STM32L471xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#elif defined(STM32L496xx) || defined(STM32L4A6xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#elif defined(STM32L4P5xx) || defined(STM32L4Q5xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1AUDIO | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1 | \ + RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC) +#elif defined(STM32L4R5xx) || defined(STM32L4S5xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1AUDIO | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1 | \ + RCC_PERIPHCLK_OSPI) +#elif defined(STM32L4R7xx) || defined(STM32L4S7xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1AUDIO | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1 | \ + RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC) +#elif defined(STM32L4R9xx) || defined(STM32L4S9xx) +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_DFSDM1AUDIO | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1 | \ + RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_DSI) +#else +#define RCC_PERIPHCLOCK_ALL (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | \ + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_SDMMC1) +#endif /* STM32L412xx || STM32L422xx */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCCEx_Private_Macros + * @{ + */ + +#define IS_RCC_LSCOSOURCE(__SOURCE__) (((__SOURCE__) == RCC_LSCOSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LSCOSOURCE_LSE)) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) ((((__SELECTION__) & RCC_PERIPHCLOCK_ALL) != 0x00u) && \ + (((__SELECTION__) & ~RCC_PERIPHCLOCK_ALL) == 0x00u)) + +#define IS_RCC_USART1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK2) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI)) + +#define IS_RCC_USART2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART2CLKSOURCE_HSI)) + +#if defined(USART3) + +#define IS_RCC_USART3CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USART3CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_USART3CLKSOURCE_HSI)) + +#endif /* USART3 */ + +#if defined(UART4) + +#define IS_RCC_UART4CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_UART4CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_UART4CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_UART4CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_UART4CLKSOURCE_HSI)) + +#endif /* UART4 */ + +#if defined(UART5) + +#define IS_RCC_UART5CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_UART5CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_UART5CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_UART5CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_UART5CLKSOURCE_HSI)) + +#endif /* UART5 */ + +#define IS_RCC_LPUART1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LPUART1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_LSE) || \ + ((__SOURCE__) == RCC_LPUART1CLKSOURCE_HSI)) + +#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI)) + +#if defined(I2C2) + +#define IS_RCC_I2C2CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C2CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2C2CLKSOURCE_HSI)) + +#endif /* I2C2 */ + +#define IS_RCC_I2C3CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C3CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C3CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2C3CLKSOURCE_HSI)) + +#if defined(I2C4) + +#define IS_RCC_I2C4CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_I2C4CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_I2C4CLKSOURCE_SYSCLK)|| \ + ((__SOURCE__) == RCC_I2C4CLKSOURCE_HSI)) + +#endif /* I2C4 */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define IS_RCC_SAI1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI2) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_HSI)) +#else +#define IS_RCC_SAI1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI2) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#elif defined(RCC_PLLSAI1_SUPPORT) + +#define IS_RCC_SAI1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN)) + +#endif /* RCC_PLLSAI2_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define IS_RCC_SAI2CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI2) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_HSI)) +#else +#define IS_RCC_SAI2CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI2) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PIN)) +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* RCC_PLLSAI2_SUPPORT */ + +#define IS_RCC_LPTIM1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSE)) + +#define IS_RCC_LPTIM2CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_LPTIM2CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSE)) + +#if defined(SDMMC1) +#if defined(RCC_HSI48_SUPPORT) && defined(RCC_CCIPR2_SDMMCSEL) + +#define IS_RCC_SDMMC1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLP) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_MSI)) + +#elif defined(RCC_HSI48_SUPPORT) + +#define IS_RCC_SDMMC1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SDMMC1CLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_MSI)) +#else + +#define IS_RCC_SDMMC1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SDMMC1CLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_MSI)) + +#endif /* RCC_HSI48_SUPPORT */ +#endif /* SDMMC1 */ + +#if defined(RCC_HSI48_SUPPORT) + +#if defined(RCC_PLLSAI1_SUPPORT) +#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_RNGCLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI)) +#else +#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_RNGCLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI)) +#endif /* RCC_PLLSAI1_SUPPORT */ + +#else + +#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_RNGCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI)) + +#endif /* RCC_HSI48_SUPPORT */ + +#if defined(USB_OTG_FS) || defined(USB) +#if defined(RCC_HSI48_SUPPORT) + +#if defined(RCC_PLLSAI1_SUPPORT) +#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_MSI)) +#else +#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_MSI)) +#endif /* RCC_PLLSAI1_SUPPORT */ + +#else + +#define IS_RCC_USBCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_USBCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_USBCLKSOURCE_MSI)) + +#endif /* RCC_HSI48_SUPPORT */ +#endif /* USB_OTG_FS || USB */ + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) + +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI2) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) + +#else + +#if defined(RCC_PLLSAI1_SUPPORT) +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI1) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) +#else +#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \ + ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK)) +#endif /* RCC_PLLSAI1_SUPPORT */ + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ + +#if defined(SWPMI1) + +#define IS_RCC_SWPMI1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_SWPMI1CLKSOURCE_PCLK1) || \ + ((__SOURCE__) == RCC_SWPMI1CLKSOURCE_HSI)) + +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Filter0) + +#define IS_RCC_DFSDM1CLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_DFSDM1CLKSOURCE_PCLK2) || \ + ((__SOURCE__) == RCC_DFSDM1CLKSOURCE_SYSCLK)) + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + +#define IS_RCC_DFSDM1AUDIOCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_SAI1) || \ + ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_MSI)) + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) + +#define IS_RCC_LTDCCLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV2) || \ + ((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV4) || \ + ((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV8) || \ + ((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV16)) + +#endif /* LTDC */ + +#if defined(DSI) + +#define IS_RCC_DSICLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_DSICLKSOURCE_DSIPHY) || \ + ((__SOURCE__) == RCC_DSICLKSOURCE_PLLSAI2)) + +#endif /* DSI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + +#define IS_RCC_OSPICLKSOURCE(__SOURCE__) \ + (((__SOURCE__) == RCC_OSPICLKSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_OSPICLKSOURCE_MSI) || \ + ((__SOURCE__) == RCC_OSPICLKSOURCE_PLL)) + +#endif /* OCTOSPI1 || OCTOSPI2 */ + +#if defined(RCC_PLLSAI1_SUPPORT) + +#define IS_RCC_PLLSAI1SOURCE(__VALUE__) IS_RCC_PLLSOURCE(__VALUE__) + +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) +#define IS_RCC_PLLSAI1M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 16U)) +#else +#define IS_RCC_PLLSAI1M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U)) +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + +#if defined(RCC_PLLSAI1N_MUL_8_127_SUPPORT) +#define IS_RCC_PLLSAI1N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 127U)) +#else +#define IS_RCC_PLLSAI1N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) +#endif /* RCC_PLLSAI1N_MUL_8_127_SUPPORT */ + +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) +#define IS_RCC_PLLSAI1P_VALUE(__VALUE__) (((__VALUE__) >= 2U) && ((__VALUE__) <= 31U)) +#else +#define IS_RCC_PLLSAI1P_VALUE(__VALUE__) (((__VALUE__) == 7U) || ((__VALUE__) == 17U)) +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#define IS_RCC_PLLSAI1Q_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ + ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) + +#define IS_RCC_PLLSAI1R_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ + ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +#define IS_RCC_PLLSAI2SOURCE(__VALUE__) IS_RCC_PLLSOURCE(__VALUE__) + +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) +#define IS_RCC_PLLSAI2M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 16U)) +#else +#define IS_RCC_PLLSAI2M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U)) +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + +#if defined(RCC_PLLSAI2N_MUL_8_127_SUPPORT) +#define IS_RCC_PLLSAI2N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 127U)) +#else +#define IS_RCC_PLLSAI2N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U)) +#endif /* RCC_PLLSAI2N_MUL_8_127_SUPPORT */ + +#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) +#define IS_RCC_PLLSAI2P_VALUE(__VALUE__) (((__VALUE__) >= 2U) && ((__VALUE__) <= 31U)) +#else +#define IS_RCC_PLLSAI2P_VALUE(__VALUE__) (((__VALUE__) == 7U) || ((__VALUE__) == 17U)) +#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ + +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) +#define IS_RCC_PLLSAI2Q_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ + ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ + +#define IS_RCC_PLLSAI2R_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \ + ((__VALUE__) == 6U) || ((__VALUE__) == 8U)) + +#endif /* RCC_PLLSAI2_SUPPORT */ + +#if defined (OCTOSPI1) && defined (OCTOSPI2) +#define IS_RCC_OCTOSPIDELAY(__DELAY__) (((__DELAY__) <= 0xFU)) +#endif /* OCTOSPI1 && OCTOSPI2 */ + +#if defined(CRS) + +#define IS_RCC_CRS_SYNC_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_CRS_SYNC_SOURCE_GPIO) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_LSE) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB)) + +#define IS_RCC_CRS_SYNC_DIV(__DIV__) (((__DIV__) == RCC_CRS_SYNC_DIV1) || ((__DIV__) == RCC_CRS_SYNC_DIV2) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV4) || ((__DIV__) == RCC_CRS_SYNC_DIV8) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV16) || ((__DIV__) == RCC_CRS_SYNC_DIV32) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV64) || ((__DIV__) == RCC_CRS_SYNC_DIV128)) + +#define IS_RCC_CRS_SYNC_POLARITY(__POLARITY__) (((__POLARITY__) == RCC_CRS_SYNC_POLARITY_RISING) || \ + ((__POLARITY__) == RCC_CRS_SYNC_POLARITY_FALLING)) + +#define IS_RCC_CRS_RELOADVALUE(__VALUE__) (((__VALUE__) <= 0xFFFFU)) + +#define IS_RCC_CRS_ERRORLIMIT(__VALUE__) (((__VALUE__) <= 0xFFU)) + +#if defined(STM32L412xx) || defined(STM32L422xx) +#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x7FU)) +#else +#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x3FU)) +#endif /* STM32L412xx || STM32L422xx */ + +#define IS_RCC_CRS_FREQERRORDIR(__DIR__) (((__DIR__) == RCC_CRS_FREQERRORDIR_UP) || \ + ((__DIR__) == RCC_CRS_FREQERRORDIR_DOWN)) + +#endif /* CRS */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_RCC_EX_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h new file mode 100644 index 0000000..f3e60f3 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart.h @@ -0,0 +1,1810 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_uart.h + * @author MCD Application Team + * @brief Header file of UART HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_UART_H +#define STM32L4xx_HAL_UART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup UART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Types UART Exported Types + * @{ + */ + +/** + * @brief UART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the UART communication baud rate. + The baud rate register is computed using the following formula: + LPUART: + ======= + Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate))) + where lpuart_ker_ck_pres is the UART input clock + (divided by a prescaler if applicable) + UART: + ===== + - If oversampling is 16 or in LIN mode, + Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate))) + - If oversampling is 8, + Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[3:0]) >> 1 + where uart_ker_ck_pres is the UART input clock + (divided by a prescaler if applicable) */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref UARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref UART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref UART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref UART_Mode. */ + + uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref UART_Hardware_Flow_Control. */ + + uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, + to achieve higher speed (up to f_PCLK/8). + This parameter can be a value of @ref UART_Over_Sampling. */ + + uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. + Selecting the single sample method increases the receiver tolerance to clock + deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ + +#if defined(USART_PRESC_PRESCALER) + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the UART clock source. + This parameter can be a value of @ref UART_ClockPrescaler. */ +#endif /* USART_PRESC_PRESCALER */ + +} UART_InitTypeDef; + +/** + * @brief UART Advanced Features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several + Advanced Features may be initialized at the same time . + This parameter can be a value of + @ref UART_Advanced_Features_Initialization_Type. */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref UART_Tx_Inv. */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref UART_Rx_Inv. */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref UART_Data_Inv. */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref UART_Rx_Tx_Swap. */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref UART_Overrun_Disable. */ + + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */ + + uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. + This parameter can be a value of @ref UART_AutoBaudRate_Enable. */ + + uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate + detection is carried out. + This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref UART_MSB_First. */ +} UART_AdvFeatureInitTypeDef; + +/** + * @brief HAL UART State definition + * @note HAL UART State value is a combination of 2 different substates: + * gState and RxState (see @ref UART_State_Definition). + * - gState contains UART state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL UART Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_UART_StateTypeDef; + +/** + * @brief UART clock sources definition + */ +typedef enum +{ + UART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + UART_CLOCKSOURCE_PCLK2 = 0x01U, /*!< PCLK2 clock source */ + UART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + UART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + UART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ + UART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ +} UART_ClockSourceTypeDef; + +/** + * @brief HAL UART Reception type definition + * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. + * This parameter can be a value of @ref UART_Reception_Type_Values : + * HAL_UART_RECEPTION_STANDARD = 0x00U, + * HAL_UART_RECEPTION_TOIDLE = 0x01U, + * HAL_UART_RECEPTION_TORTO = 0x02U, + * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U, + */ +typedef uint32_t HAL_UART_RxTypeTypeDef; + +/** + * @brief HAL UART Rx Event type definition + * @note HAL UART Rx Event type value aims to identify which type of Event has occurred + * leading to call of the RxEvent callback. + * This parameter can be a value of @ref UART_RxEvent_Type_Values : + * HAL_UART_RXEVENT_TC = 0x00U, + * HAL_UART_RXEVENT_HT = 0x01U, + * HAL_UART_RXEVENT_IDLE = 0x02U, + */ +typedef uint32_t HAL_UART_RxEventTypeTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct __UART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< UART registers base address */ + + UART_InitTypeDef Init; /*!< UART communication parameters */ + + UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< UART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< UART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ + + uint16_t Mask; /*!< UART Rx RDR register mask */ + +#if defined(USART_CR1_FIFOEN) + uint32_t FifoMode; /*!< Specifies if the FIFO mode is being used. + This parameter can be a value of @ref UARTEx_FIFO_mode. */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + +#endif /*USART_CR1_FIFOEN */ + __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ + + __IO HAL_UART_RxEventTypeTypeDef RxEventType; /*!< Type of Rx Event */ + + void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + + DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management + and also related to Tx operations. This parameter + can be a value of @ref HAL_UART_StateTypeDef */ + + __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This + parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< UART Error code */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ + void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ + void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ + void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ + void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ + void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ +#if defined(USART_CR1_FIFOEN) + void (* RxFifoFullCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Fifo Full Callback */ + void (* TxFifoEmptyCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Fifo Empty Callback */ +#endif /* USART_CR1_FIFOEN */ + void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ + + void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ + void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +} UART_HandleTypeDef; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL UART Callback ID enumeration definition + */ +typedef enum +{ + HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ + HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ + HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ + HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ + HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ + HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ + HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ + HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ + HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ +#if defined(USART_CR1_FIFOEN) + HAL_UART_RX_FIFO_FULL_CB_ID = 0x09U, /*!< UART Rx Fifo Full Callback ID */ + HAL_UART_TX_FIFO_EMPTY_CB_ID = 0x0AU, /*!< UART Tx Fifo Empty Callback ID */ +#endif /* USART_CR1_FIFOEN */ + + HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ + HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ + +} HAL_UART_CallbackIDTypeDef; + +/** + * @brief HAL UART Callback pointer definition + */ +typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ +typedef void (*pUART_RxEventCallbackTypeDef) +(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UART_Exported_Constants UART Exported Constants + * @{ + */ + +/** @defgroup UART_State_Definition UART State Code Definition + * @{ + */ +#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState.Value is result + of combination (Or) between gState and RxState values */ +#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup UART_Error_Definition UART Error Definition + * @{ + */ +#define HAL_UART_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_UART_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_UART_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_UART_ERROR_FE (0x00000004U) /*!< Frame error */ +#define HAL_UART_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#define HAL_UART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_UART_ERROR_RTO (0x00000020U) /*!< Receiver Timeout error */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define HAL_UART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup UART_Stop_Bits UART Number of Stop Bits + * @{ + */ +#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */ +#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */ +#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */ +#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup UART_Parity UART Parity + * @{ + */ +#define UART_PARITY_NONE 0x00000000U /*!< No parity */ +#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control + * @{ + */ +#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */ +#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */ +#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */ +#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */ +/** + * @} + */ + +/** @defgroup UART_Mode UART Transfer Mode + * @{ + */ +#define UART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define UART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup UART_State UART State + * @{ + */ +#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */ +#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */ +/** + * @} + */ + +/** @defgroup UART_Over_Sampling UART Over Sampling + * @{ + */ +#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method + * @{ + */ +#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */ +#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */ +/** + * @} + */ + +#if defined(USART_PRESC_PRESCALER) +/** @defgroup UART_ClockPrescaler UART Clock Prescaler + * @{ + */ +#define UART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define UART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define UART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define UART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define UART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define UART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define UART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define UART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define UART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define UART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define UART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define UART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +#endif /* USART_PRESC_PRESCALER */ +/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection + on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection + on falling edge */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection + on 0x7F frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection + on 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup UART_Receiver_Timeout UART Receiver Timeout + * @{ + */ +#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */ +#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */ +/** + * @} + */ + +/** @defgroup UART_LIN UART Local Interconnection Network mode + * @{ + */ +#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */ +#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */ +/** + * @} + */ + +/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */ +#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */ +/** + * @} + */ + +/** @defgroup UART_DMA_Tx UART DMA Tx + * @{ + */ +#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */ +#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */ +/** + * @} + */ + +/** @defgroup UART_DMA_Rx UART DMA Rx + * @{ + */ +#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */ +#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */ +/** + * @} + */ + +/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection + * @{ + */ +#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */ +#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_Methods UART WakeUp Methods + * @{ + */ +#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */ +#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */ +/** + * @} + */ + +/** @defgroup UART_Request_Parameters UART Request Parameters + * @{ + */ +#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ +#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ +#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type + * @{ + */ +#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */ +#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +/** + * @} + */ + +/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion + * @{ + */ +#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap + * @{ + */ +#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable + * @{ + */ +#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */ +/** + * @} + */ + +/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error + * @{ + */ +#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ + +/** @defgroup UART_MSB_First UART Advanced Feature MSB First + * @{ + */ +#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received + first disable */ +#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received + first enable */ +/** + * @} + */ + +/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable + * @{ + */ +#define UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U /*!< UART stop mode disable */ +#define UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM /*!< UART stop mode enable */ +/** + * @} + */ + +/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable + * @{ + */ +#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */ +#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */ +/** + * @} + */ + +/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register + * @{ + */ +#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection + * @{ + */ +#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ +#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ +#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register + not empty or RXFIFO is not empty */ +/** + * @} + */ + +/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity + * @{ + */ +#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */ +#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask + * @{ + */ +#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */ +/** + * @} + */ + +/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value + * @{ + */ +#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */ +/** + * @} + */ + +/** @defgroup UART_Flags UART Status Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#if defined(USART_CR1_FIFOEN) +#define UART_FLAG_TXFT USART_ISR_TXFT /*!< UART TXFIFO threshold flag */ +#define UART_FLAG_RXFT USART_ISR_RXFT /*!< UART RXFIFO threshold flag */ +#define UART_FLAG_RXFF USART_ISR_RXFF /*!< UART RXFIFO Full flag */ +#define UART_FLAG_TXFE USART_ISR_TXFE /*!< UART TXFIFO Empty flag */ +#endif /* USART_CR1_FIFOEN */ +#define UART_FLAG_REACK USART_ISR_REACK /*!< UART receive enable acknowledge flag */ +#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */ +#define UART_FLAG_WUF USART_ISR_WUF /*!< UART wake-up from stop mode flag */ +#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */ +#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */ +#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */ +#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ +#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ +#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ +#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */ +#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ +#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ +#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ +#if defined(USART_CR1_FIFOEN) +#define UART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< UART transmit data register empty */ +#define UART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< UART TXFIFO not full */ +#else +#define UART_FLAG_TXE USART_ISR_TXE /*!< UART transmit data register empty */ +#endif /* USART_CR1_FIFOEN */ +#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */ +#if defined(USART_CR1_FIFOEN) +#define UART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< UART read data register not empty */ +#define UART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< UART RXFIFO not empty */ +#else +#define UART_FLAG_RXNE USART_ISR_RXNE /*!< UART read data register not empty */ +#endif /* USART_CR1_FIFOEN */ +#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */ +#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */ +#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */ +#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */ +#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */ +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5bits) + * Elements values convention: 000000000XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * Elements values convention: 0000ZZZZ00000000b + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ +#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ +#if defined(USART_CR1_FIFOEN) +#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */ +#endif /* USART_CR1_FIFOEN */ +#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ +#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ +#if defined(USART_CR1_FIFOEN) +#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */ +#endif /* USART_CR1_FIFOEN */ +#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ +#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ +#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ +#define UART_IT_CM 0x112EU /*!< UART character match interruption */ +#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ +#if defined(USART_CR1_FIFOEN) +#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */ +#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */ +#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */ +#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */ +#endif /* USART_CR1_FIFOEN */ +#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ + +#define UART_IT_ERR 0x0060U /*!< UART error interruption */ + +#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ +#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ +#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ +/** + * @} + */ + +/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags + * @{ + */ +#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define UART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */ +#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#if defined(USART_CR1_FIFOEN) +#define UART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty clear flag */ +#endif /* USART_CR1_FIFOEN */ +#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ +#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ +#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ +#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ +#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */ +/** + * @} + */ + +/** @defgroup UART_Reception_Type_Values UART Reception type values + * @{ + */ +#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ +#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ +#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */ +#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */ +/** + * @} + */ + +/** @defgroup UART_RxEvent_Type_Values UART RxEvent type values + * @{ + */ +#define HAL_UART_RXEVENT_TC (0x00000000U) /*!< RxEvent linked to Transfer Complete event */ +#define HAL_UART_RXEVENT_HT (0x00000001U) /*!< RxEvent linked to Half Transfer event */ +#define HAL_UART_RXEVENT_IDLE (0x00000002U) /*!< RxEvent linked to IDLE event */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup UART_Exported_Macros UART Exported Macros + * @{ + */ + +/** @brief Reset UART handle states. + * @param __HANDLE__ UART handle. + * @retval None + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ + +/** @brief Flush the UART Data registers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified UART pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the UART PE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) + +/** @brief Clear the UART FE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) + +/** @brief Clear the UART NE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) + +/** @brief Clear the UART ORE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) + +/** @brief Clear the UART IDLE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) + +#if defined(USART_CR1_FIFOEN) +/** @brief Clear the UART TX FIFO empty clear flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_TXFECF(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_TXFECF) +#endif /* USART_CR1_FIFOEN */ + +/** @brief Check whether the specified UART flag is set or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref UART_FLAG_TXFT TXFIFO threshold flag + * @arg @ref UART_FLAG_RXFT RXFIFO threshold flag + * @arg @ref UART_FLAG_RXFF RXFIFO Full flag + * @arg @ref UART_FLAG_TXFE TXFIFO Empty flag + * @arg @ref UART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref UART_FLAG_WUF Wake up from stop mode flag + * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode) + * @arg @ref UART_FLAG_SBKF Send Break flag + * @arg @ref UART_FLAG_CMF Character match flag + * @arg @ref UART_FLAG_BUSY Busy flag + * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref UART_FLAG_CTS CTS Change flag + * @arg @ref UART_FLAG_LBDF LIN Break detection flag + * @arg @ref UART_FLAG_TXE Transmit data register empty flag + * @arg @ref UART_FLAG_TXFNF UART TXFIFO not full flag + * @arg @ref UART_FLAG_TC Transmission Complete flag + * @arg @ref UART_FLAG_RXNE Receive data register not empty flag + * @arg @ref UART_FLAG_RXFNE UART RXFIFO not empty flag + * @arg @ref UART_FLAG_RTOF Receiver Timeout flag + * @arg @ref UART_FLAG_IDLE Idle Line detection flag + * @arg @ref UART_FLAG_ORE Overrun Error flag + * @arg @ref UART_FLAG_NE Noise Error flag + * @arg @ref UART_FLAG_FE Framing Error flag + * @arg @ref UART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Disable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Check whether the specified UART interrupt has occurred or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) + +/** @brief Check whether the specified UART interrupt source is enabled or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (1U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + UART_IT_MASK))) != RESET) ? SET : RESET) + +/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty Clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific UART request flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref UART_SENDBREAK_REQUEST Send Break Request + * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request + * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** @brief Enable CTS flow control. + * @note This macro allows to enable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ + } while(0U) + +/** @brief Disable CTS flow control. + * @note This macro allows to disable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ + } while(0U) + +/** @brief Enable RTS flow control. + * @note This macro allows to enable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ + } while(0U) + +/** @brief Disable RTS flow control. + * @note This macro allows to disable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ + } while(0U) +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup UART_Private_Macros UART Private Macros + * @{ + */ +#if defined(USART_PRESC_PRESCALER) +/** @brief Get UART clock division factor from clock prescaler value. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval UART clock division factor + */ +#define UART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ + (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) ? 1U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) ? 2U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) ? 4U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) ? 6U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) ? 8U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) ? 10U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) ? 12U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) ? 16U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) ? 32U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) ? 64U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) ? 128U : 256U) + +/** @brief BRR division operation to set BRR register with LPUART. + * @param __PCLK__ LPUART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((uint32_t)((((((uint64_t)(__PCLK__))/(UARTPrescTable[(__CLOCKPRESCALER__)]))*256U)+ \ + (uint32_t)((__BAUD__)/2U)) / (__BAUD__)) \ + ) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)]) + ((__BAUD__)/2U)) / (__BAUD__)) +#else + +/** @brief BRR division operation to set BRR register with LPUART. + * @param __PCLK__ LPUART clock. + * @param __BAUD__ Baud rate set by the user. + * @retval Division result + */ +#define UART_DIV_LPUART(__PCLK__, __BAUD__) (((((uint64_t)(__PCLK__)*256U)) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @retval Division result + */ +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__) ((((__PCLK__)*2U) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @retval Division result + */ +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__) (((__PCLK__) + ((__BAUD__)/2U)) / (__BAUD__)) +#endif /* USART_PRESC_PRESCALER */ + +/** @brief Check whether or not UART instance is Low Power UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval SET (instance is LPUART) or RESET (instance isn't LPUART) + */ +#define UART_INSTANCE_LOWPOWER(__HANDLE__) (IS_LPUART_INSTANCE((__HANDLE__)->Instance)) + +/** @brief Check UART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on L4 + * divided by the smallest oversampling used on the USART (i.e. 8) + * (i.e. 120 MHz on STM32L4Rx/L4Sx, 80 Mhz otherwise) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) + */ +#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 15000001U) +#else +#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 10000001U) +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +/** @brief Check UART assertion time. + * @param __TIME__ 5-bit value assertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** @brief Check UART deassertion time. + * @param __TIME__ 5-bit value deassertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** + * @brief Ensure that UART frame number of stop bits is valid. + * @param __STOPBITS__ UART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \ + ((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_1_5) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that LPUART frame number of stop bits is valid. + * @param __STOPBITS__ LPUART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_LPUART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that UART frame parity is valid. + * @param __PARITY__ UART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \ + ((__PARITY__) == UART_PARITY_EVEN) || \ + ((__PARITY__) == UART_PARITY_ODD)) + +/** + * @brief Ensure that UART hardware flow control is valid. + * @param __CONTROL__ UART hardware flow control. + * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) + */ +#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ + (((__CONTROL__) == UART_HWCONTROL_NONE) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS) || \ + ((__CONTROL__) == UART_HWCONTROL_CTS) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) + +/** + * @brief Ensure that UART communication mode is valid. + * @param __MODE__ UART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that UART state is valid. + * @param __STATE__ UART state. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \ + ((__STATE__) == UART_STATE_ENABLE)) + +/** + * @brief Ensure that UART oversampling is valid. + * @param __SAMPLING__ UART oversampling. + * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) + */ +#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == UART_OVERSAMPLING_8)) + +/** + * @brief Ensure that UART frame sampling is valid. + * @param __ONEBIT__ UART frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE)) + +/** + * @brief Ensure that UART auto Baud rate detection mode is valid. + * @param __MODE__ UART auto Baud rate detection mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) + +/** + * @brief Ensure that UART receiver timeout setting is valid. + * @param __TIMEOUT__ UART receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) + +/** @brief Check the receiver timeout value. + * @note The maximum UART receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** + * @brief Ensure that UART LIN state is valid. + * @param __LIN__ UART LIN state. + * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) + */ +#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ + ((__LIN__) == UART_LIN_ENABLE)) + +/** + * @brief Ensure that UART LIN break detection length is valid. + * @param __LENGTH__ UART LIN break detection length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) + +/** + * @brief Ensure that UART DMA TX state is valid. + * @param __DMATX__ UART DMA TX state. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \ + ((__DMATX__) == UART_DMA_TX_ENABLE)) + +/** + * @brief Ensure that UART DMA RX state is valid. + * @param __DMARX__ UART DMA RX state. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \ + ((__DMARX__) == UART_DMA_RX_ENABLE)) + +/** + * @brief Ensure that UART half-duplex state is valid. + * @param __HDSEL__ UART half-duplex state. + * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid) + */ +#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \ + ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE)) + +/** + * @brief Ensure that UART wake-up method is valid. + * @param __WAKEUP__ UART wake-up method . + * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid) + */ +#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \ + ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK)) + +/** + * @brief Ensure that UART request parameter is valid. + * @param __PARAM__ UART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that UART advanced features initialization is valid. + * @param __INIT__ UART advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ + UART_ADVFEATURE_TXINVERT_INIT | \ + UART_ADVFEATURE_RXINVERT_INIT | \ + UART_ADVFEATURE_DATAINVERT_INIT | \ + UART_ADVFEATURE_SWAP_INIT | \ + UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ + UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ + UART_ADVFEATURE_MSBFIRST_INIT)) + +/** + * @brief Ensure that UART frame TX inversion setting is valid. + * @param __TXINV__ UART frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX inversion setting is valid. + * @param __RXINV__ UART frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE)) + +/** + * @brief Ensure that UART frame data inversion setting is valid. + * @param __DATAINV__ UART frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX/TX pins swap setting is valid. + * @param __SWAP__ UART frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE)) + +/** + * @brief Ensure that UART frame overrun setting is valid. + * @param __OVERRUN__ UART frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE)) + +/** + * @brief Ensure that UART auto Baud rate state is valid. + * @param __AUTOBAUDRATE__ UART auto Baud rate state. + * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \ + UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ + ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) + +/** + * @brief Ensure that UART DMA enabling or disabling on error setting is valid. + * @param __DMA__ UART DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) + +/** + * @brief Ensure that UART frame MSB first setting is valid. + * @param __MSBFIRST__ UART frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE)) + +/** + * @brief Ensure that UART stop mode state is valid. + * @param __STOPMODE__ UART stop mode state. + * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ + ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) + +/** + * @brief Ensure that UART mute mode state is valid. + * @param __MUTE__ UART mute mode state. + * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid) + */ +#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ + ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE)) + +/** + * @brief Ensure that UART wake-up selection is valid. + * @param __WAKE__ UART wake-up selection. + * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) + */ +#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ + ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ + ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) + +/** + * @brief Ensure that UART driver enable polarity is valid. + * @param __POLARITY__ UART driver enable polarity. + * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid) + */ +#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \ + ((__POLARITY__) == UART_DE_POLARITY_LOW)) + +#if defined(USART_PRESC_PRESCALER) +/** + * @brief Ensure that UART Prescaler is valid. + * @param __CLOCKPRESCALER__ UART Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_UART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256)) +#endif /* USART_PRESC_PRESCALER */ + +/** + * @} + */ + +/* Include UART HAL Extended module */ +#include "stm32l4xx_hal_uart_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); +void HAL_UART_MspInit(UART_HandleTypeDef *huart); +void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); + +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue); +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -----------------------------------------------------------*/ +/** @addtogroup UART_Private_Functions UART Private Functions + * @{ + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +/** + * @} + */ + +/* Private variables -----------------------------------------------------------*/ +#if defined(USART_PRESC_PRESCALER) +/** @defgroup UART_Private_variables UART Private variables + * @{ + */ +/* Prescaler Table used in BRR computation macros. + Declared as extern here to allow use of private UART macros, outside of HAL UART functions */ +extern const uint16_t UARTPrescTable[12]; +/** + * @} + */ + +#endif /* USART_PRESC_PRESCALER */ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_UART_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h new file mode 100644 index 0000000..d450962 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_uart_ex.h @@ -0,0 +1,748 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_uart_ex.h + * @author MCD Application Team + * @brief Header file of UART HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_HAL_UART_EX_H +#define STM32L4xx_HAL_UART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup UARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Types UARTEx Exported Types + * @{ + */ + +/** + * @brief UART wake up from stop mode parameters + */ +typedef struct +{ + uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). + This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. + If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must + be filled up. */ + + uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. + This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ + + uint8_t Address; /*!< UART/USART node address (7-bit long max). */ +} UART_WakeUpTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants + * @{ + */ + +/** @defgroup UARTEx_Word_Length UARTEx Word Length + * @{ + */ +#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ +#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ +#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ +/** + * @} + */ + +/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length + * @{ + */ +#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ +#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ +/** + * @} + */ + +#if defined(USART_CR1_FIFOEN) +/** @defgroup UARTEx_FIFO_mode UARTEx FIFO mode + * @brief UART FIFO mode + * @{ + */ +#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup UARTEx_TXFIFO_threshold_level UARTEx TXFIFO threshold level + * @brief UART TXFIFO threshold level + * @{ + */ +#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TX FIFO reaches 1/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TX FIFO reaches 1/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TX FIFO reaches 1/2 of its depth */ +#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TX FIFO reaches 3/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TX FIFO reaches 7/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TX FIFO becomes empty */ +/** + * @} + */ + +/** @defgroup UARTEx_RXFIFO_threshold_level UARTEx RXFIFO threshold level + * @brief UART RXFIFO threshold level + * @{ + */ +#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RX FIFO reaches 1/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RX FIFO reaches 1/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RX FIFO reaches 1/2 of its depth */ +#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RX FIFO reaches 3/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RX FIFO reaches 7/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RX FIFO becomes full */ +/** + * @} + */ + +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup UARTEx_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); + +#if defined(USART_CR1_FIFOEN) +void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart); +void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart); + +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); + +#if defined(USART_CR3_UCESM) +HAL_StatusTypeDef HAL_UARTEx_EnableClockStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableClockStopMode(UART_HandleTypeDef *huart); + +#endif /* USART_CR3_UCESM */ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); + +#if defined(USART_CR1_FIFOEN) +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); +#endif /* USART_CR1_FIFOEN */ + +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); + +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Private_Macros UARTEx Private Macros + * @{ + */ + +/** @brief Report the UART clock source. + * @param __HANDLE__ specifies the UART Handle. + * @param __CLOCKSOURCE__ output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) \ + || defined (STM32L485xx) || defined (STM32L486xx) \ + || defined (STM32L496xx) || defined (STM32L4A6xx) \ + || defined (STM32L4P5xx) || defined (STM32L4Q5xx) \ + || defined (STM32L4R5xx) || defined (STM32L4R7xx) \ + || defined (STM32L4R9xx) || defined (STM32L4S5xx) \ + || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == UART4) \ + { \ + switch(__HAL_RCC_GET_UART4_SOURCE()) \ + { \ + case RCC_UART4CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_UART4CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART4CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_UART4CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == UART5) \ + { \ + switch(__HAL_RCC_GET_UART5_SOURCE()) \ + { \ + case RCC_UART5CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_UART5CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART5CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_UART5CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined (STM32L412xx) || defined (STM32L422xx) \ + || defined (STM32L431xx) || defined (STM32L433xx) || defined (STM32L443xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined (STM32L432xx) || defined (STM32L442xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#elif defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK2: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == UART4) \ + { \ + switch(__HAL_RCC_GET_UART4_SOURCE()) \ + { \ + case RCC_UART4CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_UART4CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_UART4CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_UART4CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == LPUART1) \ + { \ + switch(__HAL_RCC_GET_LPUART1_SOURCE()) \ + { \ + case RCC_LPUART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_LPUART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_LPUART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_LPUART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0U) +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || + * STM32L496xx || STM32L4A6xx || + * STM32L4P5xx || STM32L4Q5xx || + * STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx + */ + +/** @brief Report the UART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** + * @brief Ensure that UART frame length is valid. + * @param __LENGTH__ UART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ + ((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) + +/** + * @brief Ensure that UART wake-up address length is valid. + * @param __ADDRESS__ UART wake-up address length. + * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) + */ +#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ + ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Ensure that UART TXFIFO threshold level is valid. + * @param __THRESHOLD__ UART TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_8_8)) + +/** + * @brief Ensure that UART RXFIFO threshold level is valid. + * @param __THRESHOLD__ UART RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_8_8)) + +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_HAL_UART_EX_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_bus.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_bus.h new file mode 100644 index 0000000..55927f3 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_bus.h @@ -0,0 +1,1954 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_bus.h + * @author MCD Application Team + * @brief Header file of BUS LL module. + + @verbatim + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each LL_{BUS}_GRP{x}_EnableClock() function. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_BUS_H +#define STM32L4xx_LL_BUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup BUS_LL BUS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants + * @{ + */ + +/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH + * @{ + */ +#define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN +#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN +#if defined(DMAMUX1) +#define LL_AHB1_GRP1_PERIPH_DMAMUX1 RCC_AHB1ENR_DMAMUX1EN +#endif /* DMAMUX1 */ +#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHB1ENR_FLASHEN +#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN +#define LL_AHB1_GRP1_PERIPH_TSC RCC_AHB1ENR_TSCEN +#if defined(DMA2D) +#define LL_AHB1_GRP1_PERIPH_DMA2D RCC_AHB1ENR_DMA2DEN +#endif /* DMA2D */ +#if defined(GFXMMU) +#define LL_AHB1_GRP1_PERIPH_GFXMMU RCC_AHB1ENR_GFXMMUEN +#endif /* GFXMMU */ +#define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1SMENR_SRAM1SMEN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH + * @{ + */ +#define LL_AHB2_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_AHB2_GRP1_PERIPH_GPIOA RCC_AHB2ENR_GPIOAEN +#define LL_AHB2_GRP1_PERIPH_GPIOB RCC_AHB2ENR_GPIOBEN +#define LL_AHB2_GRP1_PERIPH_GPIOC RCC_AHB2ENR_GPIOCEN +#if defined(GPIOD) +#define LL_AHB2_GRP1_PERIPH_GPIOD RCC_AHB2ENR_GPIODEN +#endif /*GPIOD*/ +#if defined(GPIOE) +#define LL_AHB2_GRP1_PERIPH_GPIOE RCC_AHB2ENR_GPIOEEN +#endif /*GPIOE*/ +#if defined(GPIOF) +#define LL_AHB2_GRP1_PERIPH_GPIOF RCC_AHB2ENR_GPIOFEN +#endif /* GPIOF */ +#if defined(GPIOG) +#define LL_AHB2_GRP1_PERIPH_GPIOG RCC_AHB2ENR_GPIOGEN +#endif /* GPIOG */ +#define LL_AHB2_GRP1_PERIPH_GPIOH RCC_AHB2ENR_GPIOHEN +#if defined(GPIOI) +#define LL_AHB2_GRP1_PERIPH_GPIOI RCC_AHB2ENR_GPIOIEN +#endif /* GPIOI */ +#if defined(USB_OTG_FS) +#define LL_AHB2_GRP1_PERIPH_OTGFS RCC_AHB2ENR_OTGFSEN +#endif /* USB_OTG_FS */ +#define LL_AHB2_GRP1_PERIPH_ADC RCC_AHB2ENR_ADCEN +#if defined(DCMI) +#define LL_AHB2_GRP1_PERIPH_DCMI RCC_AHB2ENR_DCMIEN +#endif /* DCMI */ +#if defined(AES) +#define LL_AHB2_GRP1_PERIPH_AES RCC_AHB2ENR_AESEN +#endif /* AES */ +#if defined(HASH) +#define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN +#endif /* HASH */ +#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN +#if defined(OCTOSPIM) +#define LL_AHB2_GRP1_PERIPH_OSPIM RCC_AHB2ENR_OSPIMEN +#endif /* OCTOSPIM */ +#if defined(PKA) +#define LL_AHB2_GRP1_PERIPH_PKA RCC_AHB2ENR_PKAEN +#endif /* PKA */ +#if defined(SDMMC1) && defined(RCC_AHB2ENR_SDMMC1EN) +#define LL_AHB2_GRP1_PERIPH_SDMMC1 RCC_AHB2ENR_SDMMC1EN +#endif /* SDMMC1 && RCC_AHB2ENR_SDMMC1EN */ +#define LL_AHB2_GRP1_PERIPH_SRAM2 RCC_AHB2SMENR_SRAM2SMEN +#if defined(SRAM3_BASE) +#define LL_AHB2_GRP1_PERIPH_SRAM3 RCC_AHB2SMENR_SRAM3SMEN +#endif /* SRAM3_BASE */ +/** + * @} + */ + +/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH + * @{ + */ +#define LL_AHB3_GRP1_PERIPH_ALL 0xFFFFFFFFU +#if defined(FMC_Bank1_R) +#define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN +#endif /* FMC_Bank1_R */ +#if defined(QUADSPI) +#define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN +#endif /* QUADSPI */ +#if defined(OCTOSPI1) +#define LL_AHB3_GRP1_PERIPH_OSPI1 RCC_AHB3ENR_OSPI1EN +#endif /* OCTOSPI1 */ +#if defined(OCTOSPI2) +#define LL_AHB3_GRP1_PERIPH_OSPI2 RCC_AHB3ENR_OSPI2EN +#endif /* OCTOSPI2 */ +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH + * @{ + */ +#define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR1_TIM2EN +#if defined(TIM3) +#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR1_TIM3EN +#endif /* TIM3 */ +#if defined(TIM4) +#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR1_TIM4EN +#endif /* TIM4 */ +#if defined(TIM5) +#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR1_TIM5EN +#endif /* TIM5 */ +#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR1_TIM6EN +#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR1_TIM7EN +#if defined(LCD) +#define LL_APB1_GRP1_PERIPH_LCD RCC_APB1ENR1_LCDEN +#endif /* LCD */ +#if defined(RCC_APB1ENR1_RTCAPBEN) +#define LL_APB1_GRP1_PERIPH_RTCAPB RCC_APB1ENR1_RTCAPBEN +#endif /* RCC_APB1ENR1_RTCAPBEN */ +#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR1_WWDGEN +#if defined(SPI2) +#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR1_SPI2EN +#endif /* SPI2 */ +#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR1_SPI3EN +#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR1_USART2EN +#if defined(USART3) +#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR1_USART3EN +#endif /* USART3 */ +#if defined(UART4) +#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR1_UART4EN +#endif /* UART4 */ +#if defined(UART5) +#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR1_UART5EN +#endif /* UART5 */ +#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR1_I2C1EN +#if defined(I2C2) +#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR1_I2C2EN +#endif /* I2C2 */ +#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR1_I2C3EN +#if defined(CRS) +#define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR1_CRSEN +#endif /* CRS */ +#define LL_APB1_GRP1_PERIPH_CAN1 RCC_APB1ENR1_CAN1EN +#if defined(CAN2) +#define LL_APB1_GRP1_PERIPH_CAN2 RCC_APB1ENR1_CAN2EN +#endif /* CAN2 */ +#if defined(USB) +#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR1_USBFSEN +#endif /* USB */ +#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR1_PWREN +#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR1_DAC1EN +#define LL_APB1_GRP1_PERIPH_OPAMP RCC_APB1ENR1_OPAMPEN +#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR1_LPTIM1EN +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH + * @{ + */ +#define LL_APB1_GRP2_PERIPH_ALL 0xFFFFFFFFU +#define LL_APB1_GRP2_PERIPH_LPUART1 RCC_APB1ENR2_LPUART1EN +#if defined(I2C4) +#define LL_APB1_GRP2_PERIPH_I2C4 RCC_APB1ENR2_I2C4EN +#endif /* I2C4 */ +#if defined(SWPMI1) +#define LL_APB1_GRP2_PERIPH_SWPMI1 RCC_APB1ENR2_SWPMI1EN +#endif /* SWPMI1 */ +#define LL_APB1_GRP2_PERIPH_LPTIM2 RCC_APB1ENR2_LPTIM2EN +/** + * @} + */ + +/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH + * @{ + */ +#define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU +#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN +#define LL_APB2_GRP1_PERIPH_FW RCC_APB2ENR_FWEN +#if defined(SDMMC1) && defined(RCC_APB2ENR_SDMMC1EN) +#define LL_APB2_GRP1_PERIPH_SDMMC1 RCC_APB2ENR_SDMMC1EN +#endif /* SDMMC1 && RCC_APB2ENR_SDMMC1EN */ +#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN +#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN +#if defined(TIM8) +#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN +#endif /* TIM8 */ +#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN +#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN +#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN +#if defined(TIM17) +#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN +#endif /* TIM17 */ +#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN +#if defined(SAI2) +#define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN +#endif /* SAI2 */ +#if defined(DFSDM1_Channel0) +#define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN +#endif /* DFSDM1_Channel0 */ +#if defined(LTDC) +#define LL_APB2_GRP1_PERIPH_LTDC RCC_APB2ENR_LTDCEN +#endif /* LTDC */ +#if defined(DSI) +#define LL_APB2_GRP1_PERIPH_DSI RCC_APB2ENR_DSIEN +#endif /* DSI */ +/** + * @} + */ + +/** Legacy definitions for compatibility purpose +@cond 0 +*/ +#if defined(DFSDM1_Channel0) +#define LL_APB2_GRP1_PERIPH_DFSDM LL_APB2_GRP1_PERIPH_DFSDM1 +#endif /* DFSDM1_Channel0 */ +/** +@endcond + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions + * @{ + */ + +/** @defgroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR DMAMUX1EN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR FLASHEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR TSCEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR DMA2DEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR GFXMMUEN LL_AHB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB1 peripheral clock is enabled or not + * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR DMAMUX1EN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR FLASHEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR TSCEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR DMA2DEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR GFXMMUEN LL_AHB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*) + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB1ENR, Periphs) == Periphs) ? 1UL : 0UL); +} + +/** + * @brief Disable AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR DMAMUX1EN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR FLASHEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR TSCEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR DMA2DEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR GFXMMUEN LL_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1ENR, Periphs); +} + +/** + * @brief Force AHB1 peripherals reset. + * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR DMAMUX1RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR FLASHRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR TSCRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR GFXMMURST LL_AHB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB1RSTR, Periphs); +} + +/** + * @brief Release AHB1 peripherals reset. + * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR DMAMUX1RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR FLASHRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR TSCRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR DMA2DRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR GFXMMURST LL_AHB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_ALL + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1RSTR, Periphs); +} + +/** + * @brief Enable AHB1 peripheral clocks in Sleep and Stop modes + * @rmtoll AHB1SMENR DMA1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHB1SMENR DMA2SMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHB1SMENR DMAMUX1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHB1SMENR FLASHSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHB1SMENR SRAM1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHB1SMENR CRCSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHB1SMENR TSCSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHB1SMENR DMA2DSMEN LL_AHB1_GRP1_EnableClockStopSleep\n + * AHB1SMENR GFXMMUSMEN LL_AHB1_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB1SMENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB1SMENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB1 peripheral clocks in Sleep and Stop modes + * @rmtoll AHB1SMENR DMA1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHB1SMENR DMA2SMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHB1SMENR DMAMUX1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHB1SMENR FLASHSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHB1SMENR SRAM1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHB1SMENR CRCSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHB1SMENR TSCSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHB1SMENR DMA2DSMEN LL_AHB1_GRP1_DisableClockStopSleep\n + * AHB1SMENR GFXMMUSMEN LL_AHB1_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC + * @arg @ref LL_AHB1_GRP1_PERIPH_TSC + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2D (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_GFXMMU (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1SMENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_AHB2 AHB2 + * @{ + */ + +/** + * @brief Enable AHB2 peripherals clock. + * @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR GPIOBEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR GPIOCEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR GPIODEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR GPIOEEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR GPIOFEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR GPIOGEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR GPIOHEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR GPIOIEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR OTGFSEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR ADCEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR DCMIEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR AESEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR OSPIMEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR SDMMC1EN LL_AHB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB2 peripheral clock is enabled or not + * @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR GPIOBEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR GPIOCEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR GPIODEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR GPIOEEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR GPIOFEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR GPIOGEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR GPIOHEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR GPIOIEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR OTGFSEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR ADCEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR DCMIEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR AESEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR OSPIMEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR SDMMC1EN LL_AHB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*) + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB2ENR, Periphs) == Periphs) ? 1UL : 0UL); +} + +/** + * @brief Disable AHB2 peripherals clock. + * @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR GPIOBEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR GPIOCEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR GPIODEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR GPIOEEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR GPIOFEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR GPIOGEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR GPIOHEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR GPIOIEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR OTGFSEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR ADCEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR DCMIEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR AESEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR OSPIMEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR SDMMC1EN LL_AHB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2ENR, Periphs); +} + +/** + * @brief Force AHB2 peripherals reset. + * @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR GPIOBRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR GPIOCRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR GPIODRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR GPIOERST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR GPIOFRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR GPIOGRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR GPIOHRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR GPIOIRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR ADCRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR DCMIRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR AESRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR OSPIMRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR SDMMC1RST LL_AHB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_ALL + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB2RSTR, Periphs); +} + +/** + * @brief Release AHB2 peripherals reset. + * @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR GPIOBRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR GPIOCRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR GPIODRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR GPIOERST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR GPIOFRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR GPIOGRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR GPIOHRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR GPIOIRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR ADCRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR DCMIRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR AESRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR OSPIMRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR SDMMC1RST LL_AHB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_ALL + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2RSTR, Periphs); +} + +/** + * @brief Enable AHB2 peripheral clocks in Sleep and Stop modes + * @rmtoll AHB2SMENR GPIOASMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR GPIOBSMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR GPIOCSMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR GPIODSMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR GPIOESMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR GPIOFSMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR GPIOGSMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR GPIOHSMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR GPIOISMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR SRAM2SMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR SRAM3SMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR OTGFSSMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR ADCSMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR DCMISMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR AESSMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR HASHSMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR RNGSMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR OSPIMSMEN LL_AHB2_GRP1_EnableClockStopSleep\n + * AHB2SMENR SDMMC1SMEN LL_AHB2_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_SRAM3 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB2SMENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB2SMENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB2 peripheral clocks in Sleep and Stop modes + * @rmtoll AHB2SMENR GPIOASMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR GPIOBSMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR GPIOCSMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR GPIODSMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR GPIOESMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR GPIOFSMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR GPIOGSMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR GPIOHSMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR GPIOISMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR SRAM2SMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR SRAM3SMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR OTGFSSMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR ADCSMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR DCMISMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR AESSMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR HASHSMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR RNGSMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR OSPIMSMEN LL_AHB2_GRP1_DisableClockStopSleep\n + * AHB2SMENR SDMMC1SMEN LL_AHB2_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_SRAM3 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_ADC + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_OSPIM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2SMENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_AHB3 AHB3 + * @{ + */ + +/** + * @brief Enable AHB3 peripherals clock. + * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR OSPI1EN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR OSPI2EN LL_AHB3_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB3 peripheral clock is enabled or not + * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR OSPI1EN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR OSPI2EN LL_AHB3_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB3ENR, Periphs) == Periphs) ? 1UL : 0UL); +} + +/** + * @brief Disable AHB3 peripherals clock. + * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR OSPI1EN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR OSPI2EN LL_AHB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3ENR, Periphs); +} + +/** + * @brief Force AHB3 peripherals reset. + * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR OSPI1RST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR OSPI2RST LL_AHB3_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_ALL + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB3RSTR, Periphs); +} + +/** + * @brief Release AHB3 peripherals reset. + * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR OSPI1RST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR OSPI2RST LL_AHB3_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_ALL + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3RSTR, Periphs); +} + +/** + * @brief Enable AHB3 peripheral clocks in Sleep and Stop modes + * @rmtoll AHB3SMENR FMCSMEN LL_AHB3_GRP1_EnableClockStopSleep\n + * AHB3SMENR QSPISMEN LL_AHB3_GRP1_EnableClockStopSleep\n + * AHB3SMENR OSPI1SMEN LL_AHB3_GRP1_EnableClockStopSleep\n + * AHB3SMENR OSPI2SMEN LL_AHB3_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB3SMENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB3SMENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB3 peripheral clocks in Sleep and Stop modes + * @rmtoll AHB3SMENR FMCSMEN LL_AHB3_GRP1_DisableClockStopSleep\n + * AHB3SMENR QSPISMEN LL_AHB3_GRP1_DisableClockStopSleep\n + * AHB3SMENR OSPI1SMEN LL_AHB3_GRP1_DisableClockStopSleep\n + * AHB3SMENR OSPI2SMEN LL_AHB3_GRP1_DisableClockStopSleep\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3SMENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 TIM3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 TIM4EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 TIM5EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 TIM6EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 TIM7EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 LCDEN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 RTCAPBEN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 WWDGEN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 SPI2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 SPI3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 USART2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 USART3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 UART4EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 UART5EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 I2C1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 I2C2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 I2C3EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 CRSEN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 CAN1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 USBFSEN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 CAN2EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 PWREN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 DAC1EN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 OPAMPEN LL_APB1_GRP1_EnableClock\n + * APB1ENR1 LPTIM1EN LL_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1ENR1, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1ENR1, Periphs); + (void)tmpreg; +} + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_EnableClock\n + * APB1ENR2 I2C4EN LL_APB1_GRP2_EnableClock\n + * APB1ENR2 SWPMI1EN LL_APB1_GRP2_EnableClock\n + * APB1ENR2 LPTIM2EN LL_APB1_GRP2_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1ENR2, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1ENR2, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 TIM3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 TIM4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 TIM5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 TIM6EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 TIM7EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 LCDEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 RTCAPBEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 WWDGEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 SPI2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 SPI3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 USART2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 USART3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 UART4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 UART5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 I2C1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 I2C2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 I2C3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 CRSEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 CAN1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 USBFSEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 CAN2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 PWREN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 DAC1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 OPAMPEN LL_APB1_GRP1_IsEnabledClock\n + * APB1ENR1 LPTIM1EN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB1ENR1, Periphs) == Periphs) ? 1UL : 0UL); +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_IsEnabledClock\n + * APB1ENR2 I2C4EN LL_APB1_GRP2_IsEnabledClock\n + * APB1ENR2 SWPMI1EN LL_APB1_GRP2_IsEnabledClock\n + * APB1ENR2 LPTIM2EN LL_APB1_GRP2_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB1ENR2, Periphs) == Periphs) ? 1UL : 0UL); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 TIM3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 TIM4EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 TIM5EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 TIM6EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 TIM7EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 LCDEN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 RTCAPBEN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 WWDGEN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 SPI2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 SPI3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 USART2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 USART3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 UART4EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 UART5EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 I2C1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 I2C2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 I2C3EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 CRSEN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 CAN1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 USBFSEN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 CAN2EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 PWREN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 DAC1EN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 OPAMPEN LL_APB1_GRP1_DisableClock\n + * APB1ENR1 LPTIM1EN LL_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1ENR1, Periphs); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_DisableClock\n + * APB1ENR2 I2C4EN LL_APB1_GRP2_DisableClock\n + * APB1ENR2 SWPMI1EN LL_APB1_GRP2_DisableClock\n + * APB1ENR2 LPTIM2EN LL_APB1_GRP2_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1ENR2, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 TIM3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 TIM4RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 TIM5RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 TIM6RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 TIM7RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 LCDRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 SPI2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 SPI3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 USART2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 USART3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 UART4RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 UART5RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 I2C1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 I2C2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 I2C3RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 CRSRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 CAN1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 USBFSRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 CAN2RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 PWRRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 DAC1RST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 OPAMPRST LL_APB1_GRP1_ForceReset\n + * APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_ALL + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB1RSTR1, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APB1RSTR2 LPUART1RST LL_APB1_GRP2_ForceReset\n + * APB1RSTR2 I2C4RST LL_APB1_GRP2_ForceReset\n + * APB1RSTR2 SWPMI1RST LL_APB1_GRP2_ForceReset\n + * APB1RSTR2 LPTIM2RST LL_APB1_GRP2_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_ALL + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB1RSTR2, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 TIM3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 TIM4RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 TIM5RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 TIM6RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 TIM7RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 LCDRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 SPI2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 SPI3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 USART2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 USART3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 UART4RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 UART5RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 I2C1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 I2C2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 I2C3RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 CRSRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 CAN1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 USBFSRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 CAN2RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 PWRRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 DAC1RST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 OPAMPRST LL_APB1_GRP1_ReleaseReset\n + * APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_ALL + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1RSTR1, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APB1RSTR2 LPUART1RST LL_APB1_GRP2_ReleaseReset\n + * APB1RSTR2 I2C4RST LL_APB1_GRP2_ReleaseReset\n + * APB1RSTR2 SWPMI1RST LL_APB1_GRP2_ReleaseReset\n + * APB1RSTR2 LPTIM2RST LL_APB1_GRP2_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_ALL + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1RSTR2, Periphs); +} + +/** + * @brief Enable APB1 peripheral clocks in Sleep and Stop modes + * @rmtoll APB1SMENR1 TIM2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 TIM3SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 TIM4SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 TIM5SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 TIM6SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 TIM7SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 LCDSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 RTCAPBSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 WWDGSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 SPI2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 SPI3SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 USART2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 USART3SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 UART4SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 UART5SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 I2C1SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 I2C2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 I2C3SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 CRSSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 CAN1SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 USBFSSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 CAN2SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 PWRSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 DAC1SMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 OPAMPSMEN LL_APB1_GRP1_EnableClockStopSleep\n + * APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1SMENR1, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1SMENR1, Periphs); + (void)tmpreg; +} + +/** + * @brief Enable APB1 peripheral clocks in Sleep and Stop modes + * @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_EnableClockStopSleep\n + * APB1SMENR2 I2C4SMEN LL_APB1_GRP2_EnableClockStopSleep\n + * APB1SMENR2 SWPMI1SMEN LL_APB1_GRP2_EnableClockStopSleep\n + * APB1SMENR2 LPTIM2SMEN LL_APB1_GRP2_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1SMENR2, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1SMENR2, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB1 peripheral clocks in Sleep and Stop modes + * @rmtoll APB1SMENR1 TIM2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 TIM3SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 TIM4SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 TIM5SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 TIM6SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 TIM7SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 LCDSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 RTCAPBSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 WWDGSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 SPI2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 SPI3SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 USART2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 USART3SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 UART4SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 UART5SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 I2C1SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 I2C2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 I2C3SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 CRSSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 CAN1SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 USBFSSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 CAN2SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 PWRSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 DAC1SMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 OPAMPSMEN LL_APB1_GRP1_DisableClockStopSleep\n + * APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) + * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CAN1 + * @arg @ref LL_APB1_GRP1_PERIPH_CAN2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) + * @arg @ref LL_APB1_GRP1_PERIPH_PWR + * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 + * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1SMENR1, Periphs); +} + +/** + * @brief Disable APB1 peripheral clocks in Sleep and Stop modes + * @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_DisableClockStopSleep\n + * APB1SMENR2 I2C4SMEN LL_APB1_GRP2_DisableClockStopSleep\n + * APB1SMENR2 SWPMI1SMEN LL_APB1_GRP2_DisableClockStopSleep\n + * APB1SMENR2 LPTIM2SMEN LL_APB1_GRP2_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 + * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1SMENR2, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable APB2 peripherals clock. + * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n + * APB2ENR FWEN LL_APB2_GRP1_EnableClock\n + * APB2ENR SDMMC1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n + * APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR LTDCEN LL_APB2_GRP1_EnableClock\n + * APB2ENR DSIEN LL_APB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_FW + * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB2 peripheral clock is enabled or not + * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR FWEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SDMMC1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR LTDCEN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR DSIEN LL_APB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_FW + * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * + * (*) value not defined in all devices. + * @retval State of Periphs (1 or 0). +*/ +__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB2ENR, Periphs) == Periphs) ? 1UL : 0UL); +} + +/** + * @brief Disable APB2 peripherals clock. + * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n + * APB2ENR SDMMC1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n + * APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR LTDCEN LL_APB2_GRP1_DisableClock\n + * APB2ENR DSIEN LL_APB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2ENR, Periphs); +} + +/** + * @brief Force APB2 peripherals reset. + * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SDMMC1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR LTDCRST LL_APB2_GRP1_ForceReset\n + * APB2RSTR DSIRST LL_APB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Release APB2 peripherals reset. + * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SDMMC1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM15RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM17RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR LTDCRST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR DSIRST LL_APB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_ALL + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Enable APB2 peripheral clocks in Sleep and Stop modes + * @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APB2SMENR SDMMC1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APB2SMENR TIM1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APB2SMENR SPI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APB2SMENR TIM8SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APB2SMENR USART1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APB2SMENR TIM15SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APB2SMENR TIM16SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APB2SMENR TIM17SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APB2SMENR SAI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APB2SMENR SAI2SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APB2SMENR DFSDM1SMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APB2SMENR LTDCSMEN LL_APB2_GRP1_EnableClockStopSleep\n + * APB2SMENR DSISMEN LL_APB2_GRP1_EnableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_EnableClockStopSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2SMENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2SMENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB2 peripheral clocks in Sleep and Stop modes + * @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APB2SMENR SDMMC1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APB2SMENR TIM1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APB2SMENR SPI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APB2SMENR TIM8SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APB2SMENR USART1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APB2SMENR TIM15SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APB2SMENR TIM16SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APB2SMENR TIM17SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APB2SMENR SAI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APB2SMENR SAI2SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APB2SMENR DFSDM1SMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APB2SMENR LTDCSMEN LL_APB2_GRP1_DisableClockStopSleep\n + * APB2SMENR DSISMEN LL_APB2_GRP1_DisableClockStopSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DSI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_DisableClockStopSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2SMENR, Periphs); +} + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_BUS_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_cortex.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_cortex.h new file mode 100644 index 0000000..e88c3c9 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_cortex.h @@ -0,0 +1,637 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL CORTEX driver contains a set of generic APIs that can be + used by user: + (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick + functions + (+) Low power mode configuration (SCB register of Cortex-MCU) + (+) MPU API to configure and enable regions + (+) API to access to MCU info (CPUID register) + (+) API to enable fault handler (SHCSR accesses) + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_CORTEX_H +#define STM32L4xx_LL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +/** @defgroup CORTEX_LL CORTEX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source + * @{ + */ +#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/ +#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type + * @{ + */ +#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */ +#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */ +#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */ +/** + * @} + */ + +#if __MPU_PRESENT + +/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control + * @{ + */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */ +#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */ +#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION MPU Region Number + * @{ + */ +#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */ +#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */ +#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */ +#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */ +#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */ +#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */ +#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */ +#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size + * @{ + */ +#define LL_MPU_REGION_SIZE_32B (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64B (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128B (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges + * @{ + */ +#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/ +#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/ +#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */ +#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */ +#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/ +#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level + * @{ + */ +#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */ +#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */ +#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */ +#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access + * @{ + */ +#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */ +#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access + * @{ + */ +#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */ +#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access + * @{ + */ +#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */ +#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access + * @{ + */ +#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */ +#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */ +/** + * @} + */ +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK + * @{ + */ + +/** + * @brief This function checks if the Systick counter flag is active or not. + * @note It can be used in timeout function on application side. + * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) +{ + return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)); +} + +/** + * @brief Configures the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) +{ + if (Source == LL_SYSTICK_CLKSOURCE_HCLK) + { + SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } + else + { + CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); + } +} + +/** + * @brief Get the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + */ +__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) +{ + return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK); +} + +/** + * @brief Enable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_EnableIT(void) +{ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Disable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_DisableIT(void) +{ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Checks if the SYSTICK interrupt is enabled or disabled. + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) +{ + return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE + * @{ + */ + +/** + * @brief Processor uses sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleep(void) +{ + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Processor uses deep sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableDeepSleep(void) +{ + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode. + * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an + * empty main application. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Do not sleep when returning to Thread mode. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + +/** + * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the + * processor. + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableEventOnPend(void) +{ + /* Set SEVEONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are + * excluded + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableEventOnPend(void) +{ + /* Clear SEVEONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_HANDLER HANDLER + * @{ + */ + +/** + * @brief Enable a fault in System handler control register (SHCSR) + * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault + * @param Fault This parameter can be a combination of the following values: + * @arg @ref LL_HANDLER_FAULT_USG + * @arg @ref LL_HANDLER_FAULT_BUS + * @arg @ref LL_HANDLER_FAULT_MEM + * @retval None + */ +__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault) +{ + /* Enable the system handler fault */ + SET_BIT(SCB->SHCSR, Fault); +} + +/** + * @brief Disable a fault in System handler control register (SHCSR) + * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault + * @param Fault This parameter can be a combination of the following values: + * @arg @ref LL_HANDLER_FAULT_USG + * @arg @ref LL_HANDLER_FAULT_BUS + * @arg @ref LL_HANDLER_FAULT_MEM + * @retval None + */ +__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault) +{ + /* Disable the system handler fault */ + CLEAR_BIT(SCB->SHCSR, Fault); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO + * @{ + */ + +/** + * @brief Get Implementer code + * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer + * @retval Value should be equal to 0x41 for ARM + */ +__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); +} + +/** + * @brief Get Variant number (The r value in the rnpn product revision identifier) + * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant + * @retval Value between 0 and 255 (0x0: revision 0) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); +} + +/** + * @brief Get Constant number + * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant + * @retval Value should be equal to 0xF for Cortex-M4 devices + */ +__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); +} + +/** + * @brief Get Part number + * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo + * @retval Value should be equal to 0xC24 for Cortex-M4 + */ +__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); +} + +/** + * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) + * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision + * @retval Value between 0 and 255 (0x1: patch 1) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); +} + +/** + * @} + */ + +#if __MPU_PRESENT +/** @defgroup CORTEX_LL_EF_MPU MPU + * @{ + */ + +/** + * @brief Enable MPU with input options + * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable + * @param Options This parameter can be one of the following values: + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE + * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI + * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF + * @retval None + */ +__STATIC_INLINE void LL_MPU_Enable(uint32_t Options) +{ + /* Enable the MPU*/ + WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options)); + /* Ensure MPU settings take effects */ + __DSB(); + /* Sequence instruction fetches using update settings */ + __ISB(); +} + +/** + * @brief Disable MPU + * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable + * @retval None + */ +__STATIC_INLINE void LL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + /* Disable MPU*/ + WRITE_REG(MPU->CTRL, 0U); +} + +/** + * @brief Check if MPU is enabled or not + * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void) +{ + return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)); +} + +/** + * @brief Enable a MPU region + * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Enable the MPU region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Configure and enable a region + * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR ADDR LL_MPU_ConfigRegion\n + * MPU_RASR XN LL_MPU_ConfigRegion\n + * MPU_RASR AP LL_MPU_ConfigRegion\n + * MPU_RASR S LL_MPU_ConfigRegion\n + * MPU_RASR C LL_MPU_ConfigRegion\n + * MPU_RASR B LL_MPU_ConfigRegion\n + * MPU_RASR SIZE LL_MPU_ConfigRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @param Address Value of region base address + * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF + * @param Attributes This parameter can be a combination of the following values: + * @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B + * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB + * or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB + * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB + * or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB + * or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB + * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS + * or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO + * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4 + * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE + * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE + * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE + * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE + * @retval None + */ +__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Set base address */ + WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U)); + /* Configure MPU */ + WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | (SubRegionDisable << MPU_RASR_SRD_Pos))); +} + +/** + * @brief Disable a region + * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n + * MPU_RASR ENABLE LL_MPU_DisableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Disable the MPU region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @} + */ + +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_CORTEX_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_crs.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_crs.h new file mode 100644 index 0000000..6714617 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_crs.h @@ -0,0 +1,785 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_crs.h + * @author MCD Application Team + * @brief Header file of CRS LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_CRS_H +#define STM32L4xx_LL_CRS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +#if defined(CRS) + +/** @defgroup CRS_LL CRS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Constants CRS Exported Constants + * @{ + */ + +/** @defgroup CRS_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_CRS_ReadReg function + * @{ + */ +#define LL_CRS_ISR_SYNCOKF CRS_ISR_SYNCOKF +#define LL_CRS_ISR_SYNCWARNF CRS_ISR_SYNCWARNF +#define LL_CRS_ISR_ERRF CRS_ISR_ERRF +#define LL_CRS_ISR_ESYNCF CRS_ISR_ESYNCF +#define LL_CRS_ISR_SYNCERR CRS_ISR_SYNCERR +#define LL_CRS_ISR_SYNCMISS CRS_ISR_SYNCMISS +#define LL_CRS_ISR_TRIMOVF CRS_ISR_TRIMOVF +/** + * @} + */ + +/** @defgroup CRS_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_CRS_ReadReg and LL_CRS_WriteReg functions + * @{ + */ +#define LL_CRS_CR_SYNCOKIE CRS_CR_SYNCOKIE +#define LL_CRS_CR_SYNCWARNIE CRS_CR_SYNCWARNIE +#define LL_CRS_CR_ERRIE CRS_CR_ERRIE +#define LL_CRS_CR_ESYNCIE CRS_CR_ESYNCIE +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_DIV Synchronization Signal Divider + * @{ + */ +#define LL_CRS_SYNC_DIV_1 ((uint32_t)0x00U) /*!< Synchro Signal not divided (default) */ +#define LL_CRS_SYNC_DIV_2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define LL_CRS_SYNC_DIV_4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define LL_CRS_SYNC_DIV_8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define LL_CRS_SYNC_DIV_16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define LL_CRS_SYNC_DIV_32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define LL_CRS_SYNC_DIV_64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define LL_CRS_SYNC_DIV_128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_SOURCE Synchronization Signal Source + * @{ + */ +#define LL_CRS_SYNC_SOURCE_GPIO ((uint32_t)0x00U) /*!< Synchro Signal source GPIO */ +#define LL_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define LL_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_POLARITY Synchronization Signal Polarity + * @{ + */ +#define LL_CRS_SYNC_POLARITY_RISING ((uint32_t)0x00U) /*!< Synchro Active on rising edge (default) */ +#define LL_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_FREQERRORDIR Frequency Error Direction + * @{ + */ +#define LL_CRS_FREQ_ERROR_DIR_UP ((uint32_t)0x00U) /*!< Upcounting direction, the actual frequency is above the target */ +#define LL_CRS_FREQ_ERROR_DIR_DOWN ((uint32_t)CRS_ISR_FEDIR) /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_DEFAULTVALUES Default Values + * @{ + */ +/** + * @brief Reset value of the RELOAD field + * @note The reset value of the RELOAD field corresponds to a target frequency of 48 MHz + * and a synchronization signal frequency of 1 kHz (SOF signal from USB) + */ +#define LL_CRS_RELOADVALUE_DEFAULT ((uint32_t)0xBB7FU) + +/** + * @brief Reset value of Frequency error limit. + */ +#define LL_CRS_ERRORLIMIT_DEFAULT ((uint32_t)0x22U) + +/** + * @brief Reset value of the HSI48 Calibration field + * @note The default value is 64 for STM32L412xx/L422xx, 32 otherwise, which corresponds + * to the middle of the trimming interval. + * The trimming step is around 67 kHz between two consecutive TRIM steps. + * A higher TRIM value corresponds to a higher output frequency + */ +#if defined (STM32L412xx) || defined (STM32L422xx) +#define LL_CRS_HSI48CALIBRATION_DEFAULT ((uint32_t)64U) +#else +#define LL_CRS_HSI48CALIBRATION_DEFAULT ((uint32_t)32U) +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Macros CRS Exported Macros + * @{ + */ + +/** @defgroup CRS_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CRS_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CRS_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup CRS_LL_EM_Exported_Macros_Calculate_Reload Exported_Macros_Calculate_Reload + * @{ + */ + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between + * the target frequency and the frequency of the synchronization source after + * prescaling. It is then decreased by one in order to reach the expected + * synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval Reload value (in Hz) + */ +#define __LL_CRS_CALC_CALCULATE_RELOADVALUE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Functions CRS Exported Functions + * @{ + */ + +/** @defgroup CRS_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable Frequency error counter + * @note When this bit is set, the CRS_CFGR register is write-protected and cannot be modified + * @rmtoll CR CEN LL_CRS_EnableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableFreqErrorCounter(void) +{ + SET_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Disable Frequency error counter + * @rmtoll CR CEN LL_CRS_DisableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableFreqErrorCounter(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Check if Frequency error counter is enabled or not + * @rmtoll CR CEN LL_CRS_IsEnabledFreqErrorCounter + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledFreqErrorCounter(void) +{ + return (READ_BIT(CRS->CR, CRS_CR_CEN) == (CRS_CR_CEN)); +} + +/** + * @brief Enable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_EnableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableAutoTrimming(void) +{ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Disable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_DisableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableAutoTrimming(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Check if Automatic trimming is enabled or not + * @rmtoll CR AUTOTRIMEN LL_CRS_IsEnabledAutoTrimming + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledAutoTrimming(void) +{ + return (READ_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) == (CRS_CR_AUTOTRIMEN)); +} + +/** + * @brief Set HSI48 oscillator smooth trimming + * @note When the AUTOTRIMEN bit is set, this field is controlled by hardware and is read-only + * @rmtoll CR TRIM LL_CRS_SetHSI48SmoothTrimming + * @param Value a number between Min_Data = 0 and Max_Data = 127 for STM32L412xx/L422xx or 63 otherwise + * @note Default value can be set thanks to @ref LL_CRS_HSI48CALIBRATION_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetHSI48SmoothTrimming(uint32_t Value) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, Value << CRS_CR_TRIM_Pos); +} + +/** + * @brief Get HSI48 oscillator smooth trimming + * @rmtoll CR TRIM LL_CRS_GetHSI48SmoothTrimming + * @retval a number between Min_Data = 0 and Max_Data = 127 for STM32L412xx/L422xx or 63 otherwise + */ +__STATIC_INLINE uint32_t LL_CRS_GetHSI48SmoothTrimming(void) +{ + return (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); +} + +/** + * @brief Set counter reload value + * @rmtoll CFGR RELOAD LL_CRS_SetReloadCounter + * @param Value a number between Min_Data = 0 and Max_Data = 0xFFFF + * @note Default value can be set thanks to @ref LL_CRS_RELOADVALUE_DEFAULT + * Otherwise it can be calculated in using macro @ref __LL_CRS_CALC_CALCULATE_RELOADVALUE (_FTARGET_, _FSYNC_) + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetReloadCounter(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_RELOAD, Value); +} + +/** + * @brief Get counter reload value + * @rmtoll CFGR RELOAD LL_CRS_GetReloadCounter + * @retval a number between Min_Data = 0 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_CRS_GetReloadCounter(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); +} + +/** + * @brief Set frequency error limit + * @rmtoll CFGR FELIM LL_CRS_SetFreqErrorLimit + * @param Value a number between Min_Data = 0 and Max_Data = 255 + * @note Default value can be set thanks to @ref LL_CRS_ERRORLIMIT_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetFreqErrorLimit(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_FELIM, Value << CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Get frequency error limit + * @rmtoll CFGR FELIM LL_CRS_GetFreqErrorLimit + * @retval A number between Min_Data = 0 and Max_Data = 255 + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorLimit(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_FELIM) >> CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Set division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_SetSyncDivider + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncDivider(uint32_t Divider) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCDIV, Divider); +} + +/** + * @brief Get division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_GetSyncDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncDivider(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCDIV)); +} + +/** + * @brief Set SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_SetSyncSignalSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_USB + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncSignalSource(uint32_t Source) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCSRC, Source); +} + +/** + * @brief Get SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_GetSyncSignalSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_USB + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncSignalSource(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCSRC)); +} + +/** + * @brief Set input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_SetSyncPolarity + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncPolarity(uint32_t Polarity) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCPOL, Polarity); +} + +/** + * @brief Get input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_GetSyncPolarity + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncPolarity(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCPOL)); +} + +/** + * @brief Configure CRS for the synchronization + * @rmtoll CR TRIM LL_CRS_ConfigSynchronization\n + * CFGR RELOAD LL_CRS_ConfigSynchronization\n + * CFGR FELIM LL_CRS_ConfigSynchronization\n + * CFGR SYNCDIV LL_CRS_ConfigSynchronization\n + * CFGR SYNCSRC LL_CRS_ConfigSynchronization\n + * CFGR SYNCPOL LL_CRS_ConfigSynchronization + * @param HSI48CalibrationValue a number between Min_Data = 0 and Max_Data = 127 for STM32L412xx/L422xx or 63 otherwise + * @param ErrorLimitValue a number between Min_Data = 0 and Max_Data = 0xFFFF + * @param ReloadValue a number between Min_Data = 0 and Max_Data = 255 + * @param Settings This parameter can be a combination of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 or @ref LL_CRS_SYNC_DIV_2 or @ref LL_CRS_SYNC_DIV_4 or @ref LL_CRS_SYNC_DIV_8 + * or @ref LL_CRS_SYNC_DIV_16 or @ref LL_CRS_SYNC_DIV_32 or @ref LL_CRS_SYNC_DIV_64 or @ref LL_CRS_SYNC_DIV_128 + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO or @ref LL_CRS_SYNC_SOURCE_LSE or @ref LL_CRS_SYNC_SOURCE_USB + * @arg @ref LL_CRS_SYNC_POLARITY_RISING or @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_ConfigSynchronization(uint32_t HSI48CalibrationValue, uint32_t ErrorLimitValue, uint32_t ReloadValue, uint32_t Settings) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, HSI48CalibrationValue << CRS_CR_TRIM_Pos); + MODIFY_REG(CRS->CFGR, + CRS_CFGR_RELOAD | CRS_CFGR_FELIM | CRS_CFGR_SYNCDIV | CRS_CFGR_SYNCSRC | CRS_CFGR_SYNCPOL, + ReloadValue | (ErrorLimitValue << CRS_CFGR_FELIM_Pos) | Settings); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_CRS_Management CRS_Management + * @{ + */ + +/** + * @brief Generate software SYNC event + * @rmtoll CR SWSYNC LL_CRS_GenerateEvent_SWSYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_GenerateEvent_SWSYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Get the frequency error direction latched in the time of the last + * SYNC event + * @rmtoll ISR FEDIR LL_CRS_GetFreqErrorDirection + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_FREQ_ERROR_DIR_UP + * @arg @ref LL_CRS_FREQ_ERROR_DIR_DOWN + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorDirection(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** + * @brief Get the frequency error counter value latched in the time of the last SYNC event + * @rmtoll ISR FECAP LL_CRS_GetFreqErrorCapture + * @retval A number between Min_Data = 0x0000 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorCapture(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if SYNC event OK signal occurred or not + * @rmtoll ISR SYNCOKF LL_CRS_IsActiveFlag_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCOK(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_SYNCOKF) == (CRS_ISR_SYNCOKF)); +} + +/** + * @brief Check if SYNC warning signal occurred or not + * @rmtoll ISR SYNCWARNF LL_CRS_IsActiveFlag_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCWARN(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_SYNCWARNF) == (CRS_ISR_SYNCWARNF)); +} + +/** + * @brief Check if Synchronization or trimming error signal occurred or not + * @rmtoll ISR ERRF LL_CRS_IsActiveFlag_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ERR(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_ERRF) == (CRS_ISR_ERRF)); +} + +/** + * @brief Check if Expected SYNC signal occurred or not + * @rmtoll ISR ESYNCF LL_CRS_IsActiveFlag_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ESYNC(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_ESYNCF) == (CRS_ISR_ESYNCF)); +} + +/** + * @brief Check if SYNC error signal occurred or not + * @rmtoll ISR SYNCERR LL_CRS_IsActiveFlag_SYNCERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCERR(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_SYNCERR) == (CRS_ISR_SYNCERR)); +} + +/** + * @brief Check if SYNC missed error signal occurred or not + * @rmtoll ISR SYNCMISS LL_CRS_IsActiveFlag_SYNCMISS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCMISS(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_SYNCMISS) == (CRS_ISR_SYNCMISS)); +} + +/** + * @brief Check if Trimming overflow or underflow occurred or not + * @rmtoll ISR TRIMOVF LL_CRS_IsActiveFlag_TRIMOVF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_TRIMOVF(void) +{ + return (READ_BIT(CRS->ISR, CRS_ISR_TRIMOVF) == (CRS_ISR_TRIMOVF)); +} + +/** + * @brief Clear the SYNC event OK flag + * @rmtoll ICR SYNCOKC LL_CRS_ClearFlag_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCOK(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); +} + +/** + * @brief Clear the SYNC warning flag + * @rmtoll ICR SYNCWARNC LL_CRS_ClearFlag_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCWARN(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); +} + +/** + * @brief Clear TRIMOVF, SYNCMISS and SYNCERR bits and consequently also + * the ERR flag + * @rmtoll ICR ERRC LL_CRS_ClearFlag_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ERR(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); +} + +/** + * @brief Clear Expected SYNC flag + * @rmtoll ICR ESYNCC LL_CRS_ClearFlag_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ESYNC(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_EnableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCOK(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Disable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_DisableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCOK(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Check if SYNC event OK interrupt is enabled or not + * @rmtoll CR SYNCOKIE LL_CRS_IsEnabledIT_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCOK(void) +{ + return (READ_BIT(CRS->CR, CRS_CR_SYNCOKIE) == (CRS_CR_SYNCOKIE)); +} + +/** + * @brief Enable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_EnableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCWARN(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Disable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_DisableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCWARN(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Check if SYNC warning interrupt is enabled or not + * @rmtoll CR SYNCWARNIE LL_CRS_IsEnabledIT_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCWARN(void) +{ + return (READ_BIT(CRS->CR, CRS_CR_SYNCWARNIE) == (CRS_CR_SYNCWARNIE)); +} + +/** + * @brief Enable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_EnableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ERR(void) +{ + SET_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Disable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_DisableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ERR(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Check if Synchronization or trimming error interrupt is enabled or not + * @rmtoll CR ERRIE LL_CRS_IsEnabledIT_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ERR(void) +{ + return (READ_BIT(CRS->CR, CRS_CR_ERRIE) == (CRS_CR_ERRIE)); +} + +/** + * @brief Enable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_EnableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ESYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Disable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_DisableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ESYNC(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Check if Expected SYNC interrupt is enabled or not + * @rmtoll CR ESYNCIE LL_CRS_IsEnabledIT_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ESYNC(void) +{ + return (READ_BIT(CRS->CR, CRS_CR_ESYNCIE) == (CRS_CR_ESYNCIE)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CRS_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_CRS_DeInit(void); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRS) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_CRS_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_dma.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_dma.h new file mode 100644 index 0000000..ca62934 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_dma.h @@ -0,0 +1,2430 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_dma.h + * @author MCD Application Team + * @brief Header file of DMA LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_DMA_H +#define STM32L4xx_LL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" +#if defined(DMAMUX1) +#include "stm32l4xx_ll_dmamux.h" +#endif /* DMAMUX1 */ + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Variables DMA Private Variables + * @{ + */ +/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */ +static const uint8_t CHANNEL_OFFSET_TAB[] = +{ + (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel4_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel5_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel6_BASE - DMA1_BASE), + (uint8_t)(DMA1_Channel7_BASE - DMA1_BASE) +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +#if defined(DMAMUX1) +#else +/** @defgroup DMA_LL_Private_Constants DMA Private Constants + * @{ + */ +/* Define used to get CSELR register offset */ +#define DMA_CSELR_OFFSET (uint32_t)(DMA1_CSELR_BASE - DMA1_BASE) + +/* Defines used for the bit position in the register and perform offsets */ +#define DMA_POSITION_CSELR_CXS(Channel) POSITION_VAL(DMA_CSELR_C1S << (((Channel)*4U) & 0x1FU)) +/** + * @} + */ +#endif /* DMAMUX1 */ +/* Private macros ------------------------------------------------------------*/ +#if defined(DMAMUX1) + +/** @defgroup DMA_LL_Private_Macros DMA Private Macros + * @{ + */ +/** + * @brief Helper macro to convert DMA Instance DMAx into DMAMUX channel + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 13 are mapped to DMA2 channel 1 to 7. + * @param __DMA_INSTANCE__ DMAx + * @retval Channel_Offset (LL_DMA_CHANNEL_7 or 0). + */ +#define __LL_DMA_INSTANCE_TO_DMAMUX_CHANNEL(__DMA_INSTANCE__) \ +(((__DMA_INSTANCE__) == DMA1) ? 0x00000000U : LL_DMA_CHANNEL_7) + +/** + * @} + */ +#else +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_Private_Macros DMA Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +#endif /* DMAMUX1 */ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer + or as Source base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer + or as Destination base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_LL_EC_DIRECTION + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ + + uint32_t Mode; /*!< Specifies the normal or circular operation mode. + This parameter can be a value of @ref DMA_LL_EC_MODE + @note: The circular buffer mode cannot be used if the memory to memory + data transfer direction is configured on the selected Channel + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ + + uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_PERIPH + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ + + uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_MEMORY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ + + uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ + + uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ + + uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. + The data unit is equal to the source buffer configuration set in PeripheralSize + or MemorySize parameters depending in the transfer direction. + This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ + +#if defined(DMAMUX1) + uint32_t PeriphRequest; /*!< Specifies the peripheral request. + This parameter can be a value of @ref DMAMUX_LL_EC_REQUEST + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */ +#else + uint32_t PeriphRequest; /*!< Specifies the peripheral request. + This parameter can be a value of @ref DMA_LL_EC_REQUEST + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */ +#endif /* DMAMUX1 */ + + uint32_t Priority; /*!< Specifies the channel priority level. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */ + +} LL_DMA_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants + * @{ + */ +/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMA_WriteReg function + * @{ + */ +#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */ +#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */ +#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */ +#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */ +#define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */ +#define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */ +#define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */ +#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */ +#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */ +#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMA_ReadReg function + * @{ + */ +#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */ +#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */ +#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */ +#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */ +#define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */ +#define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */ +#define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */ +#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */ +#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */ +#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions + * @{ + */ +#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */ +#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */ +#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_CHANNEL CHANNEL + * @{ + */ +#define LL_DMA_CHANNEL_1 0x00000000U /*!< DMA Channel 1 */ +#define LL_DMA_CHANNEL_2 0x00000001U /*!< DMA Channel 2 */ +#define LL_DMA_CHANNEL_3 0x00000002U /*!< DMA Channel 3 */ +#define LL_DMA_CHANNEL_4 0x00000003U /*!< DMA Channel 4 */ +#define LL_DMA_CHANNEL_5 0x00000004U /*!< DMA Channel 5 */ +#define LL_DMA_CHANNEL_6 0x00000005U /*!< DMA Channel 6 */ +#define LL_DMA_CHANNEL_7 0x00000006U /*!< DMA Channel 7 */ +#if defined(USE_FULL_LL_DRIVER) +#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */ +#endif /*USE_FULL_LL_DRIVER*/ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction + * @{ + */ +#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MODE Transfer mode + * @{ + */ +#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ +#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode + * @{ + */ +#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */ +#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MEMORY Memory increment mode + * @{ + */ +#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */ +#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment + * @{ + */ +#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment + * @{ + */ +#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level + * @{ + */ +#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ +#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ +#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + +#if !defined (DMAMUX1) +/** @defgroup DMA_LL_EC_REQUEST Transfer peripheral request + * @{ + */ +#define LL_DMA_REQUEST_0 0x00000000U /*!< DMA peripheral request 0 */ +#define LL_DMA_REQUEST_1 0x00000001U /*!< DMA peripheral request 1 */ +#define LL_DMA_REQUEST_2 0x00000002U /*!< DMA peripheral request 2 */ +#define LL_DMA_REQUEST_3 0x00000003U /*!< DMA peripheral request 3 */ +#define LL_DMA_REQUEST_4 0x00000004U /*!< DMA peripheral request 4 */ +#define LL_DMA_REQUEST_5 0x00000005U /*!< DMA peripheral request 5 */ +#define LL_DMA_REQUEST_6 0x00000006U /*!< DMA peripheral request 6 */ +#define LL_DMA_REQUEST_7 0x00000007U /*!< DMA peripheral request 7 */ +/** + * @} + */ +#endif /* !defined DMAMUX1 */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely + * @{ + */ +/** + * @brief Convert DMAx_Channely into DMAx + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval DMAx + */ +#if defined(DMA2) +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel7)) ? DMA2 : DMA1) +#else +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1) +#endif + +/** + * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval LL_DMA_CHANNEL_y + */ +#if defined (DMA2) +#if defined (DMA2_Channel6) && defined (DMA2_Channel7) +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#else +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#endif +#else +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ +(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + LL_DMA_CHANNEL_7) +#endif + +/** + * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely + * @param __DMA_INSTANCE__ DMAx + * @param __CHANNEL__ LL_DMA_CHANNEL_y + * @retval DMAx_Channely + */ +#if defined (DMA2) +#if defined (DMA2_Channel6) && defined (DMA2_Channel7) +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA2_Channel6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) ? DMA1_Channel7 : \ + DMA2_Channel7) +#else +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#endif +#else +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + DMA1_Channel7) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable DMA channel. + * @rmtoll CCR EN LL_DMA_EnableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_EN); +} + +/** + * @brief Disable DMA channel. + * @rmtoll CCR EN LL_DMA_DisableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_EN); +} + +/** + * @brief Check if DMA channel is enabled or disabled. + * @rmtoll CCR EN LL_DMA_IsEnabledChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_EN) == (DMA_CCR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure all parameters link to DMA transfer. + * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n + * CCR MEM2MEM LL_DMA_ConfigTransfer\n + * CCR CIRC LL_DMA_ConfigTransfer\n + * CCR PINC LL_DMA_ConfigTransfer\n + * CCR MINC LL_DMA_ConfigTransfer\n + * CCR PSIZE LL_DMA_ConfigTransfer\n + * CCR MSIZE LL_DMA_ConfigTransfer\n + * CCR PL LL_DMA_ConfigTransfer + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD + * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD + * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL, + Configuration); +} + +/** + * @brief Set Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_SetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction); +} + +/** + * @brief Get Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_GetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); +} + +/** + * @brief Set DMA mode circular or normal. + * @note The circular buffer mode cannot be used if the memory-to-memory + * data transfer is configured on the selected Channel. + * @rmtoll CCR CIRC LL_DMA_SetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_CIRC, + Mode); +} + +/** + * @brief Get DMA mode circular or normal. + * @rmtoll CCR CIRC LL_DMA_GetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + */ +__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_CIRC)); +} + +/** + * @brief Set Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PINC, + PeriphOrM2MSrcIncMode); +} + +/** + * @brief Get Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_PINC)); +} + +/** + * @brief Set Memory increment mode. + * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_MINC, + MemoryOrM2MDstIncMode); +} + +/** + * @brief Get Memory increment mode. + * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_MINC)); +} + +/** + * @brief Set Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PSIZE, + PeriphOrM2MSrcDataSize); +} + +/** + * @brief Get Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_PSIZE)); +} + +/** + * @brief Set Memory size. + * @rmtoll CCR MSIZE LL_DMA_SetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryOrM2MDstDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_MSIZE, + MemoryOrM2MDstDataSize); +} + +/** + * @brief Get Memory size. + * @rmtoll CCR MSIZE LL_DMA_GetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_MSIZE)); +} + +/** + * @brief Set Channel priority level. + * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Priority This parameter can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_PL, + Priority); +} + +/** + * @brief Get Channel priority level. + * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + */ +__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_PL)); +} + +/** + * @brief Set Number of data to transfer. + * @note This action has no effect if + * channel is enabled. + * @rmtoll CNDTR NDT LL_DMA_SetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + MODIFY_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CNDTR, + DMA_CNDTR_NDT, NbData); +} + +/** + * @brief Get Number of data to transfer. + * @note Once the channel is enabled, the return value indicate the + * remaining bytes to be transmitted. + * @rmtoll CNDTR NDT LL_DMA_GetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CNDTR, + DMA_CNDTR_NDT)); +} + +/** + * @brief Configure the Source and Destination addresses. + * @note This API must not be called when the DMA channel is enabled. + * @note Each peripheral using DMA provides an API to get directly the register address (LL_PPP_DMA_GetRegAddr). + * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n + * CMAR MA LL_DMA_ConfigAddresses + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress, + uint32_t DstAddress, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + /* Direction Memory to Periph */ + if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) + { + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, DstAddress); + } + /* Direction Periph to Memory and Memory to Memory */ + else + { + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, SrcAddress); + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, DstAddress); + } +} + +/** + * @brief Set the Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, MemoryAddress); +} + +/** + * @brief Set the Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, PeriphAddress); +} + +/** + * @brief Get Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CMAR MA LL_DMA_GetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR)); +} + +/** + * @brief Get Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CPAR PA LL_DMA_GetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR)); +} + +/** + * @brief Set the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR, MemoryAddress); +} + +/** + * @brief Set the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + WRITE_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR, MemoryAddress); +} + +/** + * @brief Get the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CPAR)); +} + +/** + * @brief Get the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return (READ_REG(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CMAR)); +} + +#if defined(DMAMUX1) +/** + * @brief Set DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 13 are mapped to DMA2 channel 1 to 7. + * @rmtoll CxCR DMAREQ_ID LL_DMA_SetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_ADC2 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_SPI3_RX + * @arg @ref LL_DMAMUX_REQ_SPI3_TX + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_I2C3_RX + * @arg @ref LL_DMAMUX_REQ_I2C3_TX + * @arg @ref LL_DMAMUX_REQ_I2C4_RX + * @arg @ref LL_DMAMUX_REQ_I2C4_TX + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_UART4_RX + * @arg @ref LL_DMAMUX_REQ_UART4_TX + * @arg @ref LL_DMAMUX_REQ_UART5_RX + * @arg @ref LL_DMAMUX_REQ_UART5_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SAI1_A + * @arg @ref LL_DMAMUX_REQ_SAI1_B + * @arg @ref LL_DMAMUX_REQ_SAI2_A + * @arg @ref LL_DMAMUX_REQ_SAI2_B + * @arg @ref LL_DMAMUX_REQ_OSPI1 + * @arg @ref LL_DMAMUX_REQ_OSPI2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM1_COM + * @arg @ref LL_DMAMUX_REQ_TIM8_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM8_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM8_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM8_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM8_UP + * @arg @ref LL_DMAMUX_REQ_TIM8_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM8_COM + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM4_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM4_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM4_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM4_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM4_UP + * @arg @ref LL_DMAMUX_REQ_TIM5_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM5_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM5_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM5_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM5_UP + * @arg @ref LL_DMAMUX_REQ_TIM5_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM15_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT0 + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT1 + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT2 + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT3 + * @arg @ref LL_DMAMUX_REQ_DCMI + * @arg @ref LL_DMAMUX_REQ_DCMI_PSSI + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_HASH_IN + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Request) +{ + uint32_t dmamux_ccr_offset = ((((uint32_t)DMAx ^ (uint32_t)DMA1) >> 10U) * 7U); + MODIFY_REG((DMAMUX1_Channel0 + Channel + dmamux_ccr_offset)->CCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 13 are mapped to DMA2 channel 1 to 7. + * @rmtoll CxCR DMAREQ_ID LL_DMA_GetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_ADC2 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_SPI3_RX + * @arg @ref LL_DMAMUX_REQ_SPI3_TX + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_I2C3_RX + * @arg @ref LL_DMAMUX_REQ_I2C3_TX + * @arg @ref LL_DMAMUX_REQ_I2C4_RX + * @arg @ref LL_DMAMUX_REQ_I2C4_TX + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_UART4_RX + * @arg @ref LL_DMAMUX_REQ_UART4_TX + * @arg @ref LL_DMAMUX_REQ_UART5_RX + * @arg @ref LL_DMAMUX_REQ_UART5_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SAI1_A + * @arg @ref LL_DMAMUX_REQ_SAI1_B + * @arg @ref LL_DMAMUX_REQ_SAI2_A + * @arg @ref LL_DMAMUX_REQ_SAI2_B + * @arg @ref LL_DMAMUX_REQ_OSPI1 + * @arg @ref LL_DMAMUX_REQ_OSPI2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM1_COM + * @arg @ref LL_DMAMUX_REQ_TIM8_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM8_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM8_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM8_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM8_UP + * @arg @ref LL_DMAMUX_REQ_TIM8_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM8_COM + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM4_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM4_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM4_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM4_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM4_UP + * @arg @ref LL_DMAMUX_REQ_TIM5_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM5_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM5_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM5_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM5_UP + * @arg @ref LL_DMAMUX_REQ_TIM5_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM15_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT0 + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT1 + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT2 + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT3 + * @arg @ref LL_DMAMUX_REQ_DCMI + * @arg @ref LL_DMAMUX_REQ_DCMI_PSSI + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_HASH_IN + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dmamux_ccr_offset = ((((uint32_t)DMAx ^ (uint32_t)DMA1) >> 10U) * 7U); + return (READ_BIT((DMAMUX1_Channel0 + Channel + dmamux_ccr_offset)->CCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +#else +/** + * @brief Set DMA request for DMA instance on Channel x. + * @note Please refer to Reference Manual to get the available mapping of Request value link to Channel Selection. + * @rmtoll CSELR C1S LL_DMA_SetPeriphRequest\n + * CSELR C2S LL_DMA_SetPeriphRequest\n + * CSELR C3S LL_DMA_SetPeriphRequest\n + * CSELR C4S LL_DMA_SetPeriphRequest\n + * CSELR C5S LL_DMA_SetPeriphRequest\n + * CSELR C6S LL_DMA_SetPeriphRequest\n + * CSELR C7S LL_DMA_SetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @param PeriphRequest This parameter can be one of the following values: + * @arg @ref LL_DMA_REQUEST_0 + * @arg @ref LL_DMA_REQUEST_1 + * @arg @ref LL_DMA_REQUEST_2 + * @arg @ref LL_DMA_REQUEST_3 + * @arg @ref LL_DMA_REQUEST_4 + * @arg @ref LL_DMA_REQUEST_5 + * @arg @ref LL_DMA_REQUEST_6 + * @arg @ref LL_DMA_REQUEST_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphRequest) +{ + MODIFY_REG(((DMA_Request_TypeDef *)((uint32_t)((uint32_t)DMAx + DMA_CSELR_OFFSET)))->CSELR, + DMA_CSELR_C1S << (((Channel) * 4U) & 0x1FU), PeriphRequest << DMA_POSITION_CSELR_CXS(Channel)); +} + +/** + * @brief Get DMA request for DMA instance on Channel x. + * @rmtoll CSELR C1S LL_DMA_GetPeriphRequest\n + * CSELR C2S LL_DMA_GetPeriphRequest\n + * CSELR C3S LL_DMA_GetPeriphRequest\n + * CSELR C4S LL_DMA_GetPeriphRequest\n + * CSELR C5S LL_DMA_GetPeriphRequest\n + * CSELR C6S LL_DMA_GetPeriphRequest\n + * CSELR C7S LL_DMA_GetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_REQUEST_0 + * @arg @ref LL_DMA_REQUEST_1 + * @arg @ref LL_DMA_REQUEST_2 + * @arg @ref LL_DMA_REQUEST_3 + * @arg @ref LL_DMA_REQUEST_4 + * @arg @ref LL_DMA_REQUEST_5 + * @arg @ref LL_DMA_REQUEST_6 + * @arg @ref LL_DMA_REQUEST_7 + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel) +{ + return (READ_BIT(((DMA_Request_TypeDef *)((uint32_t)((uint32_t)DMAx + DMA_CSELR_OFFSET)))->CSELR, + DMA_CSELR_C1S << ((Channel) * 4U)) >> DMA_POSITION_CSELR_CXS(Channel)); +} + +#endif /* DMAMUX1 */ +/** + * @} + */ + +/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Channel 1 global interrupt flag. + * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 global interrupt flag. + * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 global interrupt flag. + * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 global interrupt flag. + * @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 global interrupt flag. + * @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 6 global interrupt flag. + * @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 7 global interrupt flag. + * @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 1 transfer complete flag. + * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 transfer complete flag. + * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 transfer complete flag. + * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 transfer complete flag. + * @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 transfer complete flag. + * @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 6 transfer complete flag. + * @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 7 transfer complete flag. + * @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 1 half transfer flag. + * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 half transfer flag. + * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 half transfer flag. + * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 half transfer flag. + * @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 half transfer flag. + * @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 6 half transfer flag. + * @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 7 half transfer flag. + * @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 1 transfer error flag. + * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 transfer error flag. + * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 transfer error flag. + * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 transfer error flag. + * @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 transfer error flag. + * @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 6 transfer error flag. + * @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 7 transfer error flag. + * @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7)) ? 1UL : 0UL); +} + +/** + * @brief Clear Channel 1 global interrupt flag. + * @note Do not Clear Channel 1 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC1, LL_DMA_ClearFlag_HT1, + LL_DMA_ClearFlag_TE1. bug 2.4.1/2.5.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1); +} + +/** + * @brief Clear Channel 2 global interrupt flag. + * @note Do not Clear Channel 2 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC2, LL_DMA_ClearFlag_HT2, + LL_DMA_ClearFlag_TE2. bug id 2.4.1/2.5.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2); +} + +/** + * @brief Clear Channel 3 global interrupt flag. + * @note Do not Clear Channel 3 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC3, LL_DMA_ClearFlag_HT3, + LL_DMA_ClearFlag_TE3. bug id 2.4.1/2.5.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3); +} + +/** + * @brief Clear Channel 4 global interrupt flag. + * @note Do not Clear Channel 4 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC4, LL_DMA_ClearFlag_HT4, + LL_DMA_ClearFlag_TE4. bug id 2.4.1/2.5.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4); +} + +/** + * @brief Clear Channel 5 global interrupt flag. + * @note Do not Clear Channel 5 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC5, LL_DMA_ClearFlag_HT5, + LL_DMA_ClearFlag_TE5. bug id 2.4.1/2.5.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5); +} + +/** + * @brief Clear Channel 6 global interrupt flag. + * @note Do not Clear Channel 6 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC6, LL_DMA_ClearFlag_HT6, + LL_DMA_ClearFlag_TE6. bug id 2.4.1/2.5.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6); +} + +/** + * @brief Clear Channel 7 global interrupt flag. + * @note Do not Clear Channel 7 global interrupt flag when the channel in ON. + Instead clear specific flags transfer complete, half transfer & transfer + error flag with LL_DMA_ClearFlag_TC7, LL_DMA_ClearFlag_HT7, + LL_DMA_ClearFlag_TE7. bug id 2.4.1/2.5.1 in Product Errata Sheet. + * @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7); +} + +/** + * @brief Clear Channel 1 transfer complete flag. + * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1); +} + +/** + * @brief Clear Channel 2 transfer complete flag. + * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2); +} + +/** + * @brief Clear Channel 3 transfer complete flag. + * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3); +} + +/** + * @brief Clear Channel 4 transfer complete flag. + * @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4); +} + +/** + * @brief Clear Channel 5 transfer complete flag. + * @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5); +} + +/** + * @brief Clear Channel 6 transfer complete flag. + * @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6); +} + +/** + * @brief Clear Channel 7 transfer complete flag. + * @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7); +} + +/** + * @brief Clear Channel 1 half transfer flag. + * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1); +} + +/** + * @brief Clear Channel 2 half transfer flag. + * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2); +} + +/** + * @brief Clear Channel 3 half transfer flag. + * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3); +} + +/** + * @brief Clear Channel 4 half transfer flag. + * @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4); +} + +/** + * @brief Clear Channel 5 half transfer flag. + * @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5); +} + +/** + * @brief Clear Channel 6 half transfer flag. + * @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6); +} + +/** + * @brief Clear Channel 7 half transfer flag. + * @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7); +} + +/** + * @brief Clear Channel 1 transfer error flag. + * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1); +} + +/** + * @brief Clear Channel 2 transfer error flag. + * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2); +} + +/** + * @brief Clear Channel 3 transfer error flag. + * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3); +} + +/** + * @brief Clear Channel 4 transfer error flag. + * @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4); +} + +/** + * @brief Clear Channel 5 transfer error flag. + * @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5); +} + +/** + * @brief Clear Channel 6 transfer error flag. + * @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6); +} + +/** + * @brief Clear Channel 7 transfer error flag. + * @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_IT_Management IT_Management + * @{ + */ +/** + * @brief Enable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_EnableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Enable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_EnableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Enable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_EnableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + SET_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Disable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_DisableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Disable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_DisableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Disable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_DisableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + CLEAR_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Check if Transfer complete Interrupt is enabled. + * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_TCIE) == (DMA_CCR_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Half transfer Interrupt is enabled. + * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_HTIE) == (DMA_CCR_HTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Transfer error Interrupt is enabled. + * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + return ((READ_BIT(((DMA_Channel_TypeDef *)(dma_base_addr + CHANNEL_OFFSET_TAB[Channel]))->CCR, + DMA_CCR_TEIE) == (DMA_CCR_TEIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct); +ErrorStatus LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel); +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_DMA_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_dmamux.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_dmamux.h new file mode 100644 index 0000000..1cf26f2 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_dmamux.h @@ -0,0 +1,1981 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_dmamux.h + * @author MCD Application Team + * @brief Header file of DMAMUX LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_DMAMUX_H +#define STM32L4xx_LL_DMAMUX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +#if defined (DMAMUX1) + +/** @defgroup DMAMUX_LL DMAMUX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Private_Constants DMAMUX Private Constants + * @{ + */ +/* Define used to get DMAMUX CCR register size */ +#define DMAMUX_CCR_SIZE 0x00000004UL + +/* Define used to get DMAMUX RGCR register size */ +#define DMAMUX_RGCR_SIZE 0x00000004UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Constants DMAMUX Exported Constants + * @{ + */ +/** @defgroup DMAMUX_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_WriteReg function + * @{ + */ +#define LL_DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ +#define LL_DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3 /*!< Synchronization Event Overrun Flag Channel 3 */ +#define LL_DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ +#define LL_DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ +#define LL_DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#define LL_DMAMUX_CFR_CSOF7 DMAMUX_CFR_CSOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ +#define LL_DMAMUX_CFR_CSOF8 DMAMUX_CFR_CSOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ +#define LL_DMAMUX_CFR_CSOF9 DMAMUX_CFR_CSOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ +#define LL_DMAMUX_CFR_CSOF10 DMAMUX_CFR_CSOF10 /*!< Synchronization Event Overrun Flag Channel 10 */ +#define LL_DMAMUX_CFR_CSOF11 DMAMUX_CFR_CSOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ +#define LL_DMAMUX_CFR_CSOF12 DMAMUX_CFR_CSOF12 /*!< Synchronization Event Overrun Flag Channel 12 */ +#define LL_DMAMUX_CFR_CSOF13 DMAMUX_CFR_CSOF13 /*!< Synchronization Event Overrun Flag Channel 13 */ +#define LL_DMAMUX_RGCFR_RGCOF0 DMAMUX_RGCFR_COF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF1 DMAMUX_RGCFR_COF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF2 DMAMUX_RGCFR_COF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF3 DMAMUX_RGCFR_COF3 /*!< Request Generator 3 Trigger Event Overrun Flag */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_ReadReg function + * @{ + */ +#define LL_DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ +#define LL_DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3 /*!< Synchronization Event Overrun Flag Channel 3 */ +#define LL_DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ +#define LL_DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ +#define LL_DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#define LL_DMAMUX_CSR_SOF7 DMAMUX_CSR_SOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ +#define LL_DMAMUX_CSR_SOF8 DMAMUX_CSR_SOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ +#define LL_DMAMUX_CSR_SOF9 DMAMUX_CSR_SOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ +#define LL_DMAMUX_CSR_SOF10 DMAMUX_CSR_SOF10 /*!< Synchronization Event Overrun Flag Channel 10 */ +#define LL_DMAMUX_CSR_SOF11 DMAMUX_CSR_SOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ +#define LL_DMAMUX_CSR_SOF12 DMAMUX_CSR_SOF12 /*!< Synchronization Event Overrun Flag Channel 12 */ +#define LL_DMAMUX_CSR_SOF13 DMAMUX_CSR_SOF13 /*!< Synchronization Event Overrun Flag Channel 13 */ +#define LL_DMAMUX_RGSR_RGOF0 DMAMUX_RGSR_OF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF1 DMAMUX_RGSR_OF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF2 DMAMUX_RGSR_OF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF3 DMAMUX_RGSR_OF3 /*!< Request Generator 3 Trigger Event Overrun Flag */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMAMUX_WriteReg functions + * @{ + */ +#define LL_DMAMUX_CCR_SOIE DMAMUX_CxCR_SOIE /*!< Synchronization Event Overrun Interrupt */ +#define LL_DMAMUX_RGCR_RGOIE DMAMUX_RGxCR_OIE /*!< Request Generation Trigger Event Overrun Interrupt */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST Transfer request + * @{ + */ +#define LL_DMAMUX_REQ_MEM2MEM 0U /*!< Memory to memory transfer */ + +#define LL_DMAMUX_REQ_GENERATOR0 1U /*!< DMAMUX request generator 0 */ +#define LL_DMAMUX_REQ_GENERATOR1 2U /*!< DMAMUX request generator 1 */ +#define LL_DMAMUX_REQ_GENERATOR2 3U /*!< DMAMUX request generator 2 */ +#define LL_DMAMUX_REQ_GENERATOR3 4U /*!< DMAMUX request generator 3 */ + +#define LL_DMAMUX_REQ_ADC1 5U /*!< DMAMUX ADC1 request */ + +#if defined (ADC2) + +#define LL_DMAMUX_REQ_ADC2 6U /*!< DMAMUX ADC1 request */ + +#define LL_DMAMUX_REQ_DAC1_CH1 7U /*!< DMAMUX DAC1 CH1 request */ +#define LL_DMAMUX_REQ_DAC1_CH2 8U /*!< DMAMUX DAC1 CH2 request */ + +#define LL_DMAMUX_REQ_TIM6_UP 9U /*!< DMAMUX TIM6 UP request */ +#define LL_DMAMUX_REQ_TIM7_UP 10U /*!< DMAMUX TIM7 UP request */ + +#define LL_DMAMUX_REQ_SPI1_RX 11U /*!< DMAMUX SPI1 RX request */ +#define LL_DMAMUX_REQ_SPI1_TX 12U /*!< DMAMUX SPI1 TX request */ +#define LL_DMAMUX_REQ_SPI2_RX 13U /*!< DMAMUX SPI2 RX request */ +#define LL_DMAMUX_REQ_SPI2_TX 14U /*!< DMAMUX SPI2 TX request */ +#define LL_DMAMUX_REQ_SPI3_RX 15U /*!< DMAMUX SPI3 RX request */ +#define LL_DMAMUX_REQ_SPI3_TX 16U /*!< DMAMUX SPI3 TX request */ + +#define LL_DMAMUX_REQ_I2C1_RX 17U /*!< DMAMUX I2C1 RX request */ +#define LL_DMAMUX_REQ_I2C1_TX 18U /*!< DMAMUX I2C1 TX request */ +#define LL_DMAMUX_REQ_I2C2_RX 19U /*!< DMAMUX I2C2 RX request */ +#define LL_DMAMUX_REQ_I2C2_TX 20U /*!< DMAMUX I2C2 TX request */ +#define LL_DMAMUX_REQ_I2C3_RX 21U /*!< DMAMUX I2C3 RX request */ +#define LL_DMAMUX_REQ_I2C3_TX 22U /*!< DMAMUX I2C3 TX request */ +#define LL_DMAMUX_REQ_I2C4_RX 23U /*!< DMAMUX I2C4 RX request */ +#define LL_DMAMUX_REQ_I2C4_TX 24U /*!< DMAMUX I2C4 TX request */ + +#define LL_DMAMUX_REQ_USART1_RX 25U /*!< DMAMUX USART1 RX request */ +#define LL_DMAMUX_REQ_USART1_TX 26U /*!< DMAMUX USART1 TX request */ +#define LL_DMAMUX_REQ_USART2_RX 27U /*!< DMAMUX USART2 RX request */ +#define LL_DMAMUX_REQ_USART2_TX 28U /*!< DMAMUX USART2 TX request */ +#define LL_DMAMUX_REQ_USART3_RX 29U /*!< DMAMUX USART3 RX request */ +#define LL_DMAMUX_REQ_USART3_TX 30U /*!< DMAMUX USART3 TX request */ + +#define LL_DMAMUX_REQ_UART4_RX 31U /*!< DMAMUX UART4 RX request */ +#define LL_DMAMUX_REQ_UART4_TX 32U /*!< DMAMUX UART4 TX request */ +#define LL_DMAMUX_REQ_UART5_RX 33U /*!< DMAMUX UART5 RX request */ +#define LL_DMAMUX_REQ_UART5_TX 34U /*!< DMAMUX UART5 TX request */ + +#define LL_DMAMUX_REQ_LPUART1_RX 35U /*!< DMAMUX LPUART1 RX request */ +#define LL_DMAMUX_REQ_LPUART1_TX 36U /*!< DMAMUX LPUART1 TX request */ + +#define LL_DMAMUX_REQ_SAI1_A 37U /*!< DMAMUX SAI1 A request */ +#define LL_DMAMUX_REQ_SAI1_B 38U /*!< DMAMUX SAI1 B request */ +#define LL_DMAMUX_REQ_SAI2_A 39U /*!< DMAMUX SAI2 A request */ +#define LL_DMAMUX_REQ_SAI2_B 40U /*!< DMAMUX SAI2 B request */ + +#define LL_DMAMUX_REQ_OSPI1 41U /*!< DMAMUX OCTOSPI1 request */ +#define LL_DMAMUX_REQ_OSPI2 42U /*!< DMAMUX OCTOSPI2 request */ + +#define LL_DMAMUX_REQ_TIM1_CH1 43U /*!< DMAMUX TIM1 CH1 request */ +#define LL_DMAMUX_REQ_TIM1_CH2 44U /*!< DMAMUX TIM1 CH2 request */ +#define LL_DMAMUX_REQ_TIM1_CH3 45U /*!< DMAMUX TIM1 CH3 request */ +#define LL_DMAMUX_REQ_TIM1_CH4 46U /*!< DMAMUX TIM1 CH4 request */ +#define LL_DMAMUX_REQ_TIM1_UP 47U /*!< DMAMUX TIM1 UP request */ +#define LL_DMAMUX_REQ_TIM1_TRIG 48U /*!< DMAMUX TIM1 TRIG request */ +#define LL_DMAMUX_REQ_TIM1_COM 49U /*!< DMAMUX TIM1 COM request */ + +#define LL_DMAMUX_REQ_TIM8_CH1 50U /*!< DMAMUX TIM8 CH1 request */ +#define LL_DMAMUX_REQ_TIM8_CH2 51U /*!< DMAMUX TIM8 CH2 request */ +#define LL_DMAMUX_REQ_TIM8_CH3 52U /*!< DMAMUX TIM8 CH3 request */ +#define LL_DMAMUX_REQ_TIM8_CH4 53U /*!< DMAMUX TIM8 CH4 request */ +#define LL_DMAMUX_REQ_TIM8_UP 54U /*!< DMAMUX TIM8 UP request */ +#define LL_DMAMUX_REQ_TIM8_TRIG 55U /*!< DMAMUX TIM8 TRIG request */ +#define LL_DMAMUX_REQ_TIM8_COM 56U /*!< DMAMUX TIM8 COM request */ + +#define LL_DMAMUX_REQ_TIM2_CH1 57U /*!< DMAMUX TIM2 CH1 request */ +#define LL_DMAMUX_REQ_TIM2_CH2 58U /*!< DMAMUX TIM2 CH2 request */ +#define LL_DMAMUX_REQ_TIM2_CH3 59U /*!< DMAMUX TIM2 CH3 request */ +#define LL_DMAMUX_REQ_TIM2_CH4 60U /*!< DMAMUX TIM2 CH4 request */ +#define LL_DMAMUX_REQ_TIM2_UP 61U /*!< DMAMUX TIM2 UP request */ + +#define LL_DMAMUX_REQ_TIM3_CH1 62U /*!< DMAMUX TIM3 CH1 request */ +#define LL_DMAMUX_REQ_TIM3_CH2 63U /*!< DMAMUX TIM3 CH2 request */ +#define LL_DMAMUX_REQ_TIM3_CH3 64U /*!< DMAMUX TIM3 CH3 request */ +#define LL_DMAMUX_REQ_TIM3_CH4 65U /*!< DMAMUX TIM3 CH4 request */ +#define LL_DMAMUX_REQ_TIM3_UP 66U /*!< DMAMUX TIM3 UP request */ +#define LL_DMAMUX_REQ_TIM3_TRIG 67U /*!< DMAMUX TIM3 TRIG request */ + +#define LL_DMAMUX_REQ_TIM4_CH1 68U /*!< DMAMUX TIM4 CH1 request */ +#define LL_DMAMUX_REQ_TIM4_CH2 69U /*!< DMAMUX TIM4 CH2 request */ +#define LL_DMAMUX_REQ_TIM4_CH3 70U /*!< DMAMUX TIM4 CH3 request */ +#define LL_DMAMUX_REQ_TIM4_CH4 71U /*!< DMAMUX TIM4 CH4 request */ +#define LL_DMAMUX_REQ_TIM4_UP 72U /*!< DMAMUX TIM4 UP request */ + +#define LL_DMAMUX_REQ_TIM5_CH1 73U /*!< DMAMUX TIM5 CH1 request */ +#define LL_DMAMUX_REQ_TIM5_CH2 74U /*!< DMAMUX TIM5 CH2 request */ +#define LL_DMAMUX_REQ_TIM5_CH3 75U /*!< DMAMUX TIM5 CH3 request */ +#define LL_DMAMUX_REQ_TIM5_CH4 76U /*!< DMAMUX TIM5 CH4 request */ +#define LL_DMAMUX_REQ_TIM5_UP 77U /*!< DMAMUX TIM5 UP request */ +#define LL_DMAMUX_REQ_TIM5_TRIG 78U /*!< DMAMUX TIM5 TRIG request */ +#define LL_DMAMUX_REQ_TIM15_CH1 79U /*!< DMAMUX TIM15 CH1 request */ +#define LL_DMAMUX_REQ_TIM15_UP 80U /*!< DMAMUX TIM15 UP request */ +#define LL_DMAMUX_REQ_TIM15_TRIG 81U /*!< DMAMUX TIM15 TRIG request */ +#define LL_DMAMUX_REQ_TIM15_COM 82U /*!< DMAMUX TIM15 COM request */ + +#define LL_DMAMUX_REQ_TIM16_CH1 83U /*!< DMAMUX TIM16 CH1 request */ +#define LL_DMAMUX_REQ_TIM16_UP 84U /*!< DMAMUX TIM16 UP request */ +#define LL_DMAMUX_REQ_TIM17_CH1 85U /*!< DMAMUX TIM17 CH1 request */ +#define LL_DMAMUX_REQ_TIM17_UP 86U /*!< DMAMUX TIM17 UP request */ + +#define LL_DMAMUX_REQ_DFSDM1_FLT0 87U /*!< DMAMUX DFSDM1_FLT0 request */ +#define LL_DMAMUX_REQ_DFSDM1_FLT1 88U /*!< DMAMUX DFSDM1_FLT1 request */ +#define LL_DMAMUX_REQ_DFSDM1_FLT2 89U /*!< DMAMUX DFSDM1_FLT2 request */ +#define LL_DMAMUX_REQ_DFSDM1_FLT3 90U /*!< DMAMUX DFSDM1_FLT3 request */ + +#define LL_DMAMUX_REQ_DCMI 91U /*!< DMAMUX DCMI request */ +#define LL_DMAMUX_REQ_DCMI_PSSI 91U /*!< DMAMUX PSSI request */ + +#define LL_DMAMUX_REQ_AES_IN 92U /*!< DMAMUX AES_IN request */ +#define LL_DMAMUX_REQ_AES_OUT 93U /*!< DMAMUX AES_OUT request */ + +#define LL_DMAMUX_REQ_HASH_IN 94U /*!< DMAMUX HASH_IN request */ + +#else + +#define LL_DMAMUX_REQ_DAC1_CH1 6U /*!< DMAMUX DAC1 CH1 request */ +#define LL_DMAMUX_REQ_DAC1_CH2 7U /*!< DMAMUX DAC1 CH2 request */ + +#define LL_DMAMUX_REQ_TIM6_UP 8U /*!< DMAMUX TIM6 UP request */ +#define LL_DMAMUX_REQ_TIM7_UP 9U /*!< DMAMUX TIM7 UP request */ + +#define LL_DMAMUX_REQ_SPI1_RX 10U /*!< DMAMUX SPI1 RX request */ +#define LL_DMAMUX_REQ_SPI1_TX 11U /*!< DMAMUX SPI1 TX request */ +#define LL_DMAMUX_REQ_SPI2_RX 12U /*!< DMAMUX SPI2 RX request */ +#define LL_DMAMUX_REQ_SPI2_TX 13U /*!< DMAMUX SPI2 TX request */ +#define LL_DMAMUX_REQ_SPI3_RX 14U /*!< DMAMUX SPI3 RX request */ +#define LL_DMAMUX_REQ_SPI3_TX 15U /*!< DMAMUX SPI3 TX request */ + +#define LL_DMAMUX_REQ_I2C1_RX 16U /*!< DMAMUX I2C1 RX request */ +#define LL_DMAMUX_REQ_I2C1_TX 17U /*!< DMAMUX I2C1 TX request */ +#define LL_DMAMUX_REQ_I2C2_RX 18U /*!< DMAMUX I2C2 RX request */ +#define LL_DMAMUX_REQ_I2C2_TX 19U /*!< DMAMUX I2C2 TX request */ +#define LL_DMAMUX_REQ_I2C3_RX 20U /*!< DMAMUX I2C3 RX request */ +#define LL_DMAMUX_REQ_I2C3_TX 21U /*!< DMAMUX I2C3 TX request */ +#define LL_DMAMUX_REQ_I2C4_RX 22U /*!< DMAMUX I2C4 RX request */ +#define LL_DMAMUX_REQ_I2C4_TX 23U /*!< DMAMUX I2C4 TX request */ + +#define LL_DMAMUX_REQ_USART1_RX 24U /*!< DMAMUX USART1 RX request */ +#define LL_DMAMUX_REQ_USART1_TX 25U /*!< DMAMUX USART1 TX request */ +#define LL_DMAMUX_REQ_USART2_RX 26U /*!< DMAMUX USART2 RX request */ +#define LL_DMAMUX_REQ_USART2_TX 27U /*!< DMAMUX USART2 TX request */ +#define LL_DMAMUX_REQ_USART3_RX 28U /*!< DMAMUX USART3 RX request */ +#define LL_DMAMUX_REQ_USART3_TX 29U /*!< DMAMUX USART3 TX request */ + +#define LL_DMAMUX_REQ_UART4_RX 30U /*!< DMAMUX UART4 RX request */ +#define LL_DMAMUX_REQ_UART4_TX 31U /*!< DMAMUX UART4 TX request */ +#define LL_DMAMUX_REQ_UART5_RX 32U /*!< DMAMUX UART5 RX request */ +#define LL_DMAMUX_REQ_UART5_TX 33U /*!< DMAMUX UART5 TX request */ + +#define LL_DMAMUX_REQ_LPUART1_RX 34U /*!< DMAMUX LPUART1 RX request */ +#define LL_DMAMUX_REQ_LPUART1_TX 35U /*!< DMAMUX LPUART1 TX request */ + +#define LL_DMAMUX_REQ_SAI1_A 36U /*!< DMAMUX SAI1 A request */ +#define LL_DMAMUX_REQ_SAI1_B 37U /*!< DMAMUX SAI1 B request */ +#define LL_DMAMUX_REQ_SAI2_A 38U /*!< DMAMUX SAI2 A request */ +#define LL_DMAMUX_REQ_SAI2_B 39U /*!< DMAMUX SAI2 B request */ + +#define LL_DMAMUX_REQ_OSPI1 40U /*!< DMAMUX OCTOSPI1 request */ +#define LL_DMAMUX_REQ_OSPI2 41U /*!< DMAMUX OCTOSPI2 request */ + +#define LL_DMAMUX_REQ_TIM1_CH1 42U /*!< DMAMUX TIM1 CH1 request */ +#define LL_DMAMUX_REQ_TIM1_CH2 43U /*!< DMAMUX TIM1 CH2 request */ +#define LL_DMAMUX_REQ_TIM1_CH3 44U /*!< DMAMUX TIM1 CH3 request */ +#define LL_DMAMUX_REQ_TIM1_CH4 45U /*!< DMAMUX TIM1 CH4 request */ +#define LL_DMAMUX_REQ_TIM1_UP 46U /*!< DMAMUX TIM1 UP request */ +#define LL_DMAMUX_REQ_TIM1_TRIG 47U /*!< DMAMUX TIM1 TRIG request */ +#define LL_DMAMUX_REQ_TIM1_COM 48U /*!< DMAMUX TIM1 COM request */ + +#define LL_DMAMUX_REQ_TIM8_CH1 49U /*!< DMAMUX TIM8 CH1 request */ +#define LL_DMAMUX_REQ_TIM8_CH2 50U /*!< DMAMUX TIM8 CH2 request */ +#define LL_DMAMUX_REQ_TIM8_CH3 51U /*!< DMAMUX TIM8 CH3 request */ +#define LL_DMAMUX_REQ_TIM8_CH4 52U /*!< DMAMUX TIM8 CH4 request */ +#define LL_DMAMUX_REQ_TIM8_UP 53U /*!< DMAMUX TIM8 UP request */ +#define LL_DMAMUX_REQ_TIM8_TRIG 54U /*!< DMAMUX TIM8 TRIG request */ +#define LL_DMAMUX_REQ_TIM8_COM 55U /*!< DMAMUX TIM8 COM request */ + +#define LL_DMAMUX_REQ_TIM2_CH1 56U /*!< DMAMUX TIM2 CH1 request */ +#define LL_DMAMUX_REQ_TIM2_CH2 57U /*!< DMAMUX TIM2 CH2 request */ +#define LL_DMAMUX_REQ_TIM2_CH3 58U /*!< DMAMUX TIM2 CH3 request */ +#define LL_DMAMUX_REQ_TIM2_CH4 59U /*!< DMAMUX TIM2 CH4 request */ +#define LL_DMAMUX_REQ_TIM2_UP 60U /*!< DMAMUX TIM2 UP request */ + +#define LL_DMAMUX_REQ_TIM3_CH1 61U /*!< DMAMUX TIM3 CH1 request */ +#define LL_DMAMUX_REQ_TIM3_CH2 62U /*!< DMAMUX TIM3 CH2 request */ +#define LL_DMAMUX_REQ_TIM3_CH3 63U /*!< DMAMUX TIM3 CH3 request */ +#define LL_DMAMUX_REQ_TIM3_CH4 64U /*!< DMAMUX TIM3 CH4 request */ +#define LL_DMAMUX_REQ_TIM3_UP 65U /*!< DMAMUX TIM3 UP request */ +#define LL_DMAMUX_REQ_TIM3_TRIG 66U /*!< DMAMUX TIM3 TRIG request */ + +#define LL_DMAMUX_REQ_TIM4_CH1 67U /*!< DMAMUX TIM4 CH1 request */ +#define LL_DMAMUX_REQ_TIM4_CH2 68U /*!< DMAMUX TIM4 CH2 request */ +#define LL_DMAMUX_REQ_TIM4_CH3 69U /*!< DMAMUX TIM4 CH3 request */ +#define LL_DMAMUX_REQ_TIM4_CH4 70U /*!< DMAMUX TIM4 CH4 request */ +#define LL_DMAMUX_REQ_TIM4_UP 71U /*!< DMAMUX TIM4 UP request */ + +#define LL_DMAMUX_REQ_TIM5_CH1 72U /*!< DMAMUX TIM5 CH1 request */ +#define LL_DMAMUX_REQ_TIM5_CH2 73U /*!< DMAMUX TIM5 CH2 request */ +#define LL_DMAMUX_REQ_TIM5_CH3 74U /*!< DMAMUX TIM5 CH3 request */ +#define LL_DMAMUX_REQ_TIM5_CH4 75U /*!< DMAMUX TIM5 CH4 request */ +#define LL_DMAMUX_REQ_TIM5_UP 76U /*!< DMAMUX TIM5 UP request */ +#define LL_DMAMUX_REQ_TIM5_TRIG 77U /*!< DMAMUX TIM5 TRIG request */ +#define LL_DMAMUX_REQ_TIM15_CH1 78U /*!< DMAMUX TIM15 CH1 request */ +#define LL_DMAMUX_REQ_TIM15_UP 79U /*!< DMAMUX TIM15 UP request */ +#define LL_DMAMUX_REQ_TIM15_TRIG 80U /*!< DMAMUX TIM15 TRIG request */ +#define LL_DMAMUX_REQ_TIM15_COM 81U /*!< DMAMUX TIM15 COM request */ + +#define LL_DMAMUX_REQ_TIM16_CH1 82U /*!< DMAMUX TIM16 CH1 request */ +#define LL_DMAMUX_REQ_TIM16_UP 83U /*!< DMAMUX TIM16 UP request */ +#define LL_DMAMUX_REQ_TIM17_CH1 84U /*!< DMAMUX TIM17 CH1 request */ +#define LL_DMAMUX_REQ_TIM17_UP 85U /*!< DMAMUX TIM17 UP request */ + +#define LL_DMAMUX_REQ_DFSDM1_FLT0 86U /*!< DMAMUX DFSDM1_FLT0 request */ +#define LL_DMAMUX_REQ_DFSDM1_FLT1 87U /*!< DMAMUX DFSDM1_FLT1 request */ +#define LL_DMAMUX_REQ_DFSDM1_FLT2 88U /*!< DMAMUX DFSDM1_FLT2 request */ +#define LL_DMAMUX_REQ_DFSDM1_FLT3 89U /*!< DMAMUX DFSDM1_FLT3 request */ + +#define LL_DMAMUX_REQ_DCMI 90U /*!< DMAMUX DCMI request */ + +#define LL_DMAMUX_REQ_AES_IN 91U /*!< DMAMUX AES_IN request */ +#define LL_DMAMUX_REQ_AES_OUT 92U /*!< DMAMUX AES_OUT request */ + +#define LL_DMAMUX_REQ_HASH_IN 93U /*!< DMAMUX HASH_IN request */ + +#endif + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_CHANNEL DMAMUX Channel + * @{ + */ +#define LL_DMAMUX_CHANNEL_0 0x00000000U /*!< DMAMUX Channel 0 connected to DMA1 Channel 1 */ +#define LL_DMAMUX_CHANNEL_1 0x00000001U /*!< DMAMUX Channel 1 connected to DMA1 Channel 2 */ +#define LL_DMAMUX_CHANNEL_2 0x00000002U /*!< DMAMUX Channel 2 connected to DMA1 Channel 3 */ +#define LL_DMAMUX_CHANNEL_3 0x00000003U /*!< DMAMUX Channel 3 connected to DMA1 Channel 4 */ +#define LL_DMAMUX_CHANNEL_4 0x00000004U /*!< DMAMUX Channel 4 connected to DMA1 Channel 5 */ +#define LL_DMAMUX_CHANNEL_5 0x00000005U /*!< DMAMUX Channel 5 connected to DMA1 Channel 6 */ +#define LL_DMAMUX_CHANNEL_6 0x00000006U /*!< DMAMUX Channel 6 connected to DMA1 Channel 7 */ +#define LL_DMAMUX_CHANNEL_7 0x00000007U /*!< DMAMUX Channel 7 connected to DMA2 Channel 1 */ +#define LL_DMAMUX_CHANNEL_8 0x00000008U /*!< DMAMUX Channel 8 connected to DMA2 Channel 2 */ +#define LL_DMAMUX_CHANNEL_9 0x00000009U /*!< DMAMUX Channel 9 connected to DMA2 Channel 3 */ +#define LL_DMAMUX_CHANNEL_10 0x0000000AU /*!< DMAMUX Channel 10 connected to DMA2 Channel 4 */ +#define LL_DMAMUX_CHANNEL_11 0x0000000BU /*!< DMAMUX Channel 11 connected to DMA2 Channel 5 */ +#define LL_DMAMUX_CHANNEL_12 0x0000000CU /*!< DMAMUX Channel 12 connected to DMA2 Channel 6 */ +#define LL_DMAMUX_CHANNEL_13 0x0000000DU /*!< DMAMUX Channel 13 connected to DMA2 Channel 7 */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_NO Synchronization Signal Polarity + * @{ + */ +#define LL_DMAMUX_SYNC_NO_EVENT 0x00000000U /*!< All requests are blocked */ +#define LL_DMAMUX_SYNC_POL_RISING DMAMUX_CxCR_SPOL_0 /*!< Synchronization on event on rising edge */ +#define LL_DMAMUX_SYNC_POL_FALLING DMAMUX_CxCR_SPOL_1 /*!< Synchronization on event on falling edge */ +#define LL_DMAMUX_SYNC_POL_RISING_FALLING (DMAMUX_CxCR_SPOL_0 | DMAMUX_CxCR_SPOL_1) /*!< Synchronization on event on rising and falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_EVT Synchronization Signal Event + * @{ + */ +#define LL_DMAMUX_SYNC_EXTI_LINE0 0x00000000U /*!< Synchronization signal from EXTI Line0 */ +#define LL_DMAMUX_SYNC_EXTI_LINE1 DMAMUX_CxCR_SYNC_ID_0 /*!< Synchronization signal from EXTI Line1 */ +#define LL_DMAMUX_SYNC_EXTI_LINE2 DMAMUX_CxCR_SYNC_ID_1 /*!< Synchronization signal from EXTI Line2 */ +#define LL_DMAMUX_SYNC_EXTI_LINE3 (DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line3 */ +#define LL_DMAMUX_SYNC_EXTI_LINE4 DMAMUX_CxCR_SYNC_ID_2 /*!< Synchronization signal from EXTI Line4 */ +#define LL_DMAMUX_SYNC_EXTI_LINE5 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line5 */ +#define LL_DMAMUX_SYNC_EXTI_LINE6 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line6 */ +#define LL_DMAMUX_SYNC_EXTI_LINE7 (DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line7 */ +#define LL_DMAMUX_SYNC_EXTI_LINE8 DMAMUX_CxCR_SYNC_ID_3 /*!< Synchronization signal from EXTI Line8 */ +#define LL_DMAMUX_SYNC_EXTI_LINE9 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line9 */ +#define LL_DMAMUX_SYNC_EXTI_LINE10 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line10 */ +#define LL_DMAMUX_SYNC_EXTI_LINE11 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line11 */ +#define LL_DMAMUX_SYNC_EXTI_LINE12 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2) /*!< Synchronization signal from EXTI Line12 */ +#define LL_DMAMUX_SYNC_EXTI_LINE13 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line13 */ +#define LL_DMAMUX_SYNC_EXTI_LINE14 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from EXTI Line14 */ +#define LL_DMAMUX_SYNC_EXTI_LINE15 (DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from EXTI Line15 */ +#define LL_DMAMUX_SYNC_DMAMUX_CH0 DMAMUX_CxCR_SYNC_ID_4 /*!< Synchronization signal from DMAMUX channel0 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH1 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from DMAMUX channel1 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH2 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from DMAMUX channel2 Event */ +#define LL_DMAMUX_SYNC_DMAMUX_CH3 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from DMAMUX channel3 Event */ +#define LL_DMAMUX_SYNC_LPTIM1_OUT (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2) /*!< Synchronization signal from LPTIM1 Output */ +#define LL_DMAMUX_SYNC_LPTIM2_OUT (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from LPTIM2 Output */ +#define LL_DMAMUX_SYNC_DSI_TE (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from DSI Tearing Effect */ +#define LL_DMAMUX_SYNC_DSI_REFRESH_END (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from DSI End of Refresh */ +#define LL_DMAMUX_SYNC_DMA2D_TX_END (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_3) /*!< Synchronization signal from DMA2D End of Transfer */ +#define LL_DMAMUX_SYNC_LTDC_LINE_IT (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_3 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from LTDC Line Interrupt */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GENERATOR Request Generator Channel + * @{ + */ +#define LL_DMAMUX_REQ_GEN_0 0x00000000U +#define LL_DMAMUX_REQ_GEN_1 0x00000001U +#define LL_DMAMUX_REQ_GEN_2 0x00000002U +#define LL_DMAMUX_REQ_GEN_3 0x00000003U +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN_POLARITY External Request Signal Generation Polarity + * @{ + */ +#define LL_DMAMUX_REQ_GEN_NO_EVENT 0x00000000U /*!< No external DMA request generation */ +#define LL_DMAMUX_REQ_GEN_POL_RISING DMAMUX_RGxCR_GPOL_0 /*!< External DMA request generation on event on rising edge */ +#define LL_DMAMUX_REQ_GEN_POL_FALLING DMAMUX_RGxCR_GPOL_1 /*!< External DMA request generation on event on falling edge */ +#define LL_DMAMUX_REQ_GEN_POL_RISING_FALLING (DMAMUX_RGxCR_GPOL_0 | DMAMUX_RGxCR_GPOL_1) /*!< External DMA request generation on rising and falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN External Request Signal Generation + * @{ + */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE0 0x00000000U /*!< Request signal generation from EXTI Line0 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE1 DMAMUX_RGxCR_SIG_ID_0 /*!< Request signal generation from EXTI Line1 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE2 DMAMUX_RGxCR_SIG_ID_1 /*!< Request signal generation from EXTI Line2 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE3 (DMAMUX_RGxCR_SIG_ID_1 |DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line3 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE4 DMAMUX_RGxCR_SIG_ID_2 /*!< Request signal generation from EXTI Line4 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE5 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line5 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE6 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line6 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE7 (DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line7 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE8 DMAMUX_RGxCR_SIG_ID_3 /*!< Request signal generation from EXTI Line8 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE9 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line9 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE10 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line10 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE11 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line11 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE12 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2) /*!< Request signal generation from EXTI Line12 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE13 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line13 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE14 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from EXTI Line14 */ +#define LL_DMAMUX_REQ_GEN_EXTI_LINE15 (DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from EXTI Line15 */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH0 DMAMUX_RGxCR_SIG_ID_4 /*!< Request signal generation from DMAMUX channel0 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH1 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from DMAMUX channel1 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH2 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from DMAMUX channel2 Event */ +#define LL_DMAMUX_REQ_GEN_DMAMUX_CH3 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from DMAMUX channel3 Event */ +#define LL_DMAMUX_REQ_GEN_LPTIM1_OUT (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2) /*!< Request signal generation from LPTIM1 Output */ +#define LL_DMAMUX_REQ_GEN_LPTIM2_OUT (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from LPTIM2 Output */ +#define LL_DMAMUX_REQ_GEN_DSI_TE (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from DSI Tearing Effect */ +#define LL_DMAMUX_REQ_GEN_DSI_REFRESH_END (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from DSI End of Refresh */ +#define LL_DMAMUX_REQ_GEN_DMA2D_TX_END (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_3) /*!< Request signal generation from DMA2D End of Transfer */ +#define LL_DMAMUX_REQ_GEN_LTDC_LINE_IT (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_3 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from LTDC Line Interrupt */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Macros DMAMUX Exported Macros + * @{ + */ + +/** @defgroup DMAMUX_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMAMUX_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMAMUX_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Functions DMAMUX Exported Functions + * @{ + */ + +/** @defgroup DMAMUX_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Set DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 13 are mapped to DMA2 channel 1 to 7. + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_SetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_SPI3_RX + * @arg @ref LL_DMAMUX_REQ_SPI3_TX + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_I2C3_RX + * @arg @ref LL_DMAMUX_REQ_I2C3_TX + * @arg @ref LL_DMAMUX_REQ_I2C4_RX + * @arg @ref LL_DMAMUX_REQ_I2C4_TX + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_UART4_RX + * @arg @ref LL_DMAMUX_REQ_UART4_TX + * @arg @ref LL_DMAMUX_REQ_UART5_RX + * @arg @ref LL_DMAMUX_REQ_UART5_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SAI1_A + * @arg @ref LL_DMAMUX_REQ_SAI1_B + * @arg @ref LL_DMAMUX_REQ_SAI2_A + * @arg @ref LL_DMAMUX_REQ_SAI2_B + * @arg @ref LL_DMAMUX_REQ_OSPI1 + * @arg @ref LL_DMAMUX_REQ_OSPI2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM1_COM + * @arg @ref LL_DMAMUX_REQ_TIM8_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM8_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM8_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM8_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM8_UP + * @arg @ref LL_DMAMUX_REQ_TIM8_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM8_COM + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM4_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM4_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM4_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM4_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM4_UP + * @arg @ref LL_DMAMUX_REQ_TIM5_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM5_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM5_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM5_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM5_UP + * @arg @ref LL_DMAMUX_REQ_TIM5_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM15_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT0 + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT1 + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT2 + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT3 + * @arg @ref LL_DMAMUX_REQ_DCMI + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_HASH_IN + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Request) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX channel 0 to 6 are mapped to DMA1 channel 1 to 7. + * DMAMUX channel 7 to 13 are mapped to DMA2 channel 1 to 7. + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_GetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX_REQ_ADC1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM6_UP + * @arg @ref LL_DMAMUX_REQ_TIM7_UP + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_SPI2_RX + * @arg @ref LL_DMAMUX_REQ_SPI2_TX + * @arg @ref LL_DMAMUX_REQ_SPI3_RX + * @arg @ref LL_DMAMUX_REQ_SPI3_TX + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_I2C3_RX + * @arg @ref LL_DMAMUX_REQ_I2C3_TX + * @arg @ref LL_DMAMUX_REQ_I2C4_RX + * @arg @ref LL_DMAMUX_REQ_I2C4_TX + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_USART2_RX + * @arg @ref LL_DMAMUX_REQ_USART2_TX + * @arg @ref LL_DMAMUX_REQ_USART3_RX + * @arg @ref LL_DMAMUX_REQ_USART3_TX + * @arg @ref LL_DMAMUX_REQ_UART4_RX + * @arg @ref LL_DMAMUX_REQ_UART4_TX + * @arg @ref LL_DMAMUX_REQ_UART5_RX + * @arg @ref LL_DMAMUX_REQ_UART5_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_SAI1_A + * @arg @ref LL_DMAMUX_REQ_SAI1_B + * @arg @ref LL_DMAMUX_REQ_SAI2_A + * @arg @ref LL_DMAMUX_REQ_SAI2_B + * @arg @ref LL_DMAMUX_REQ_OSPI1 + * @arg @ref LL_DMAMUX_REQ_OSPI2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM1_UP + * @arg @ref LL_DMAMUX_REQ_TIM1_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM1_COM + * @arg @ref LL_DMAMUX_REQ_TIM8_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM8_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM8_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM8_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM8_UP + * @arg @ref LL_DMAMUX_REQ_TIM8_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM8_COM + * @arg @ref LL_DMAMUX_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM2_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM3_UP + * @arg @ref LL_DMAMUX_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM4_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM4_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM4_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM4_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM4_UP + * @arg @ref LL_DMAMUX_REQ_TIM5_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM5_CH2 + * @arg @ref LL_DMAMUX_REQ_TIM5_CH3 + * @arg @ref LL_DMAMUX_REQ_TIM5_CH4 + * @arg @ref LL_DMAMUX_REQ_TIM5_UP + * @arg @ref LL_DMAMUX_REQ_TIM5_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM15_UP + * @arg @ref LL_DMAMUX_REQ_TIM15_TRIG + * @arg @ref LL_DMAMUX_REQ_TIM15_COM + * @arg @ref LL_DMAMUX_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM16_UP + * @arg @ref LL_DMAMUX_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX_REQ_TIM17_UP + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT0 + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT1 + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT2 + * @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT3 + * @arg @ref LL_DMAMUX_REQ_DCMI + * @arg @ref LL_DMAMUX_REQ_AES_IN + * @arg @ref LL_DMAMUX_REQ_AES_OUT + * @arg @ref LL_DMAMUX_REQ_HASH_IN + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a synchronization event and/or the number of DMA request needed to generate an event. + * @rmtoll CxCR NBREQ LL_DMAMUX_SetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t RequestNb) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_NBREQ, ((RequestNb - 1U) << DMAMUX_CxCR_NBREQ_Pos)); +} + +/** + * @brief Get the number of DMA request that will be autorized after a synchronization event and/or the number of DMA request needed to generate an event. + * @rmtoll CxCR NBREQ LL_DMAMUX_GetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_NBREQ)) >> DMAMUX_CxCR_NBREQ_Pos) + 1U); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is synchronized. + * @rmtoll CxCR SPOL LL_DMAMUX_SetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Polarity) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is synchronized. + * @rmtoll CxCR SPOL LL_DMAMUX_GetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SPOL)); +} + +/** + * @brief Enable the Event Generation on DMAMUX channel x. + * @rmtoll CxCR EGE LL_DMAMUX_EnableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Disable the Event Generation on DMAMUX channel x. + * @rmtoll CxCR EGE LL_DMAMUX_DisableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Check if the Event Generation on DMAMUX channel x is enabled or disabled. + * @rmtoll CxCR EGE LL_DMAMUX_IsEnabledEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_EGE) == (DMAMUX_CxCR_EGE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the synchronization mode. + * @rmtoll CxCR SE LL_DMAMUX_EnableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Disable the synchronization mode. + * @rmtoll CxCR SE LL_DMAMUX_DisableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Check if the synchronization mode is enabled or disabled. + * @rmtoll CxCR SE LL_DMAMUX_IsEnabledSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SE) == (DMAMUX_CxCR_SE)) ? 1UL : 0UL); +} + +/** + * @brief Set DMAMUX synchronization ID on DMAMUX Channel x. + * @rmtoll CxCR SYNC_ID LL_DMAMUX_SetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @param SyncID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE0 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE1 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE2 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE3 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE4 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE5 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE6 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE7 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE8 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE9 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE10 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE11 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE12 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE13 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE14 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE15 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX_SYNC_DSI_TE + * @arg @ref LL_DMAMUX_SYNC_DSI_REFRESH_END + * @arg @ref LL_DMAMUX_SYNC_DMA2D_TX_END + * @arg @ref LL_DMAMUX_SYNC_LTDC_LINE_IT + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t SyncID) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SYNC_ID, SyncID); +} + +/** + * @brief Get DMAMUX synchronization ID on DMAMUX Channel x. + * @rmtoll CxCR SYNC_ID LL_DMAMUX_GetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE0 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE1 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE2 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE3 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE4 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE5 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE6 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE7 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE8 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE9 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE10 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE11 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE12 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE13 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE14 + * @arg @ref LL_DMAMUX_SYNC_EXTI_LINE15 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_SYNC_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX_SYNC_DSI_TE + * @arg @ref LL_DMAMUX_SYNC_DSI_REFRESH_END + * @arg @ref LL_DMAMUX_SYNC_DMA2D_TX_END + * @arg @ref LL_DMAMUX_SYNC_LTDC_LINE_IT + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SYNC_ID)); +} + +/** + * @brief Enable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_EnableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + SET_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Disable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_DisableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + CLEAR_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Check if the Request Generator is enabled or disabled. + * @rmtoll RGxCR GE LL_DMAMUX_IsEnabledRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return ((READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GE) == (DMAMUX_RGxCR_GE)) ? 1UL : 0UL); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_SetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestGenPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t Polarity) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_GetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestGenPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GPOL)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a generation event. + * @note This field can only be written when Generator is disabled. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_SetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetGenRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t RequestNb) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GNBREQ, (RequestNb - 1U) << DMAMUX_RGxCR_GNBREQ_Pos); +} + +/** + * @brief Get the number of DMA request that will be autorized after a generation event. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_GetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetGenRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)((READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_GNBREQ) >> DMAMUX_RGxCR_GNBREQ_Pos) + 1U); +} + +/** + * @brief Set DMAMUX external Request Signal ID on DMAMUX Request Generation Trigger Event Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_SetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @param RequestSignalID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE0 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE1 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE2 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE3 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE4 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE5 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE6 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE7 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE8 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE9 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE10 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE11 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE12 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE13 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE14 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE15 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM1_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM2_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_DSI_TE + * @arg @ref LL_DMAMUX_REQ_GEN_DSI_REFRESH_END + * @arg @ref LL_DMAMUX_REQ_GEN_DMA2D_TX_END + * @arg @ref LL_DMAMUX_REQ_GEN_LTDC_LINE_IT + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestSignalID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t RequestSignalID) +{ + (void)(DMAMUXx); + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_SIG_ID, RequestSignalID); +} + +/** + * @brief Get DMAMUX external Request Signal ID set on DMAMUX Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_GetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE0 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE1 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE2 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE3 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE4 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE5 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE6 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE7 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE8 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE9 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE10 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE11 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE12 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE13 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE14 + * @arg @ref LL_DMAMUX_REQ_GEN_EXTI_LINE15 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH0 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH1 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH2 + * @arg @ref LL_DMAMUX_REQ_GEN_DMAMUX_CH3 + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM1_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_LPTIM2_OUT + * @arg @ref LL_DMAMUX_REQ_GEN_DSI_TE + * @arg @ref LL_DMAMUX_REQ_GEN_DSI_REFRESH_END + * @arg @ref LL_DMAMUX_REQ_GEN_DMA2D_TX_END + * @arg @ref LL_DMAMUX_REQ_GEN_LTDC_LINE_IT + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestSignalID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_RequestGenerator0 + (DMAMUX_RGCR_SIZE * (RequestGenChannel)))))->RGCR, DMAMUX_RGxCR_SIG_ID)); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Synchronization Event Overrun Flag Channel 0. + * @rmtoll CSR SOF0 LL_DMAMUX_IsActiveFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF0) == (DMAMUX_CSR_SOF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 1. + * @rmtoll CSR SOF1 LL_DMAMUX_IsActiveFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF1) == (DMAMUX_CSR_SOF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 2. + * @rmtoll CSR SOF2 LL_DMAMUX_IsActiveFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF2) == (DMAMUX_CSR_SOF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 3. + * @rmtoll CSR SOF3 LL_DMAMUX_IsActiveFlag_SO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF3) == (DMAMUX_CSR_SOF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 4. + * @rmtoll CSR SOF4 LL_DMAMUX_IsActiveFlag_SO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF4) == (DMAMUX_CSR_SOF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 5. + * @rmtoll CSR SOF5 LL_DMAMUX_IsActiveFlag_SO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF5) == (DMAMUX_CSR_SOF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 6. + * @rmtoll CSR SOF6 LL_DMAMUX_IsActiveFlag_SO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF6) == (DMAMUX_CSR_SOF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 7. + * @rmtoll CSR SOF7 LL_DMAMUX_IsActiveFlag_SO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF7) == (DMAMUX_CSR_SOF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 8. + * @rmtoll CSR SOF8 LL_DMAMUX_IsActiveFlag_SO8 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO8(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF8) == (DMAMUX_CSR_SOF8)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 9. + * @rmtoll CSR SOF9 LL_DMAMUX_IsActiveFlag_SO9 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO9(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF9) == (DMAMUX_CSR_SOF9)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 10. + * @rmtoll CSR SOF10 LL_DMAMUX_IsActiveFlag_SO10 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO10(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF10) == (DMAMUX_CSR_SOF10)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 11. + * @rmtoll CSR SOF11 LL_DMAMUX_IsActiveFlag_SO11 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO11(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF11) == (DMAMUX_CSR_SOF11)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 12. + * @rmtoll CSR SOF12 LL_DMAMUX_IsActiveFlag_SO12 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO12(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF12) == (DMAMUX_CSR_SOF12)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 13. + * @rmtoll CSR SOF13 LL_DMAMUX_IsActiveFlag_SO13 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO13(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF13) == (DMAMUX_CSR_SOF13)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGSR OF0 LL_DMAMUX_IsActiveFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF0) == (DMAMUX_RGSR_OF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGSR OF1 LL_DMAMUX_IsActiveFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF1) == (DMAMUX_RGSR_OF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGSR OF2 LL_DMAMUX_IsActiveFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF2) == (DMAMUX_RGSR_OF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGSR OF3 LL_DMAMUX_IsActiveFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + return ((READ_BIT(DMAMUX1_RequestGenStatus->RGSR, DMAMUX_RGSR_OF3) == (DMAMUX_RGSR_OF3)) ? 1UL : 0UL); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 0. + * @rmtoll CFR CSOF0 LL_DMAMUX_ClearFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF0); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 1. + * @rmtoll CFR CSOF1 LL_DMAMUX_ClearFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF1); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 2. + * @rmtoll CFR CSOF2 LL_DMAMUX_ClearFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF2); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 3. + * @rmtoll CFR CSOF3 LL_DMAMUX_ClearFlag_SO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF3); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 4. + * @rmtoll CFR CSOF4 LL_DMAMUX_ClearFlag_SO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF4); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 5. + * @rmtoll CFR CSOF5 LL_DMAMUX_ClearFlag_SO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF5); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 6. + * @rmtoll CFR CSOF6 LL_DMAMUX_ClearFlag_SO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF6); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 7. + * @rmtoll CFR CSOF7 LL_DMAMUX_ClearFlag_SO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF7); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 8. + * @rmtoll CFR CSOF8 LL_DMAMUX_ClearFlag_SO8 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO8(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF8); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 9. + * @rmtoll CFR CSOF9 LL_DMAMUX_ClearFlag_SO9 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO9(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF9); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 10. + * @rmtoll CFR CSOF10 LL_DMAMUX_ClearFlag_SO10 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO10(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF10); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 11. + * @rmtoll CFR CSOF11 LL_DMAMUX_ClearFlag_SO11 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO11(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF11); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 12. + * @rmtoll CFR CSOF12 LL_DMAMUX_ClearFlag_SO12 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO12(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF12); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 13. + * @rmtoll CFR CSOF13 LL_DMAMUX_ClearFlag_SO13 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO13(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF13); +} + +/** + * @brief Clear Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF0 LL_DMAMUX_ClearFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF0); +} + +/** + * @brief Clear Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF1 LL_DMAMUX_ClearFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF1); +} + +/** + * @brief Clear Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF2 LL_DMAMUX_ClearFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF2); +} + +/** + * @brief Clear Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF3 LL_DMAMUX_ClearFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + (void)(DMAMUXx); + SET_BIT(DMAMUX1_RequestGenStatus->RGCFR, DMAMUX_RGCFR_COF3); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll CxCR SOIE LL_DMAMUX_EnableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Disable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll CxCR SOIE LL_DMAMUX_DisableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Check if the Synchronization Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @rmtoll CxCR SOIE LL_DMAMUX_IsEnabledIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (((READ_BIT((DMAMUX1_Channel0 + Channel)->CCR, DMAMUX_CxCR_SOIE)) == (DMAMUX_CxCR_SOIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_EnableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + SET_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Disable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_DisableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + CLEAR_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Check if the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @rmtoll RGxCR OIE LL_DMAMUX_IsEnabledIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + (void)(DMAMUXx); + return ((READ_BIT((DMAMUX1_RequestGenerator0 + RequestGenChannel)->RGCR, DMAMUX_RGxCR_OIE) == (DMAMUX_RGxCR_OIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMAMUX1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_DMAMUX_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_exti.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_exti.h new file mode 100644 index 0000000..a1ee112 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_exti.h @@ -0,0 +1,1359 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_exti.h + * @author MCD Application Team + * @brief Header file of EXTI LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_EXTI_H +#define STM32L4xx_LL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private Macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure + * @{ + */ +typedef struct +{ + + uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + uint32_t Line_32_63; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 32 to 63 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ + + uint8_t Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_MODE. */ + + uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ +} LL_EXTI_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_LL_EC_LINE LINE + * @{ + */ +#define LL_EXTI_LINE_0 EXTI_IMR1_IM0 /*!< Extended line 0 */ +#define LL_EXTI_LINE_1 EXTI_IMR1_IM1 /*!< Extended line 1 */ +#define LL_EXTI_LINE_2 EXTI_IMR1_IM2 /*!< Extended line 2 */ +#define LL_EXTI_LINE_3 EXTI_IMR1_IM3 /*!< Extended line 3 */ +#define LL_EXTI_LINE_4 EXTI_IMR1_IM4 /*!< Extended line 4 */ +#define LL_EXTI_LINE_5 EXTI_IMR1_IM5 /*!< Extended line 5 */ +#define LL_EXTI_LINE_6 EXTI_IMR1_IM6 /*!< Extended line 6 */ +#define LL_EXTI_LINE_7 EXTI_IMR1_IM7 /*!< Extended line 7 */ +#define LL_EXTI_LINE_8 EXTI_IMR1_IM8 /*!< Extended line 8 */ +#define LL_EXTI_LINE_9 EXTI_IMR1_IM9 /*!< Extended line 9 */ +#define LL_EXTI_LINE_10 EXTI_IMR1_IM10 /*!< Extended line 10 */ +#define LL_EXTI_LINE_11 EXTI_IMR1_IM11 /*!< Extended line 11 */ +#define LL_EXTI_LINE_12 EXTI_IMR1_IM12 /*!< Extended line 12 */ +#define LL_EXTI_LINE_13 EXTI_IMR1_IM13 /*!< Extended line 13 */ +#define LL_EXTI_LINE_14 EXTI_IMR1_IM14 /*!< Extended line 14 */ +#define LL_EXTI_LINE_15 EXTI_IMR1_IM15 /*!< Extended line 15 */ +#if defined(EXTI_IMR1_IM16) +#define LL_EXTI_LINE_16 EXTI_IMR1_IM16 /*!< Extended line 16 */ +#endif +#define LL_EXTI_LINE_17 EXTI_IMR1_IM17 /*!< Extended line 17 */ +#if defined(EXTI_IMR1_IM18) +#define LL_EXTI_LINE_18 EXTI_IMR1_IM18 /*!< Extended line 18 */ +#endif +#define LL_EXTI_LINE_19 EXTI_IMR1_IM19 /*!< Extended line 19 */ +#if defined(EXTI_IMR1_IM20) +#define LL_EXTI_LINE_20 EXTI_IMR1_IM20 /*!< Extended line 20 */ +#endif +#if defined(EXTI_IMR1_IM21) +#define LL_EXTI_LINE_21 EXTI_IMR1_IM21 /*!< Extended line 21 */ +#endif +#if defined(EXTI_IMR1_IM22) +#define LL_EXTI_LINE_22 EXTI_IMR1_IM22 /*!< Extended line 22 */ +#endif +#define LL_EXTI_LINE_23 EXTI_IMR1_IM23 /*!< Extended line 23 */ +#if defined(EXTI_IMR1_IM24) +#define LL_EXTI_LINE_24 EXTI_IMR1_IM24 /*!< Extended line 24 */ +#endif +#if defined(EXTI_IMR1_IM25) +#define LL_EXTI_LINE_25 EXTI_IMR1_IM25 /*!< Extended line 25 */ +#endif +#if defined(EXTI_IMR1_IM26) +#define LL_EXTI_LINE_26 EXTI_IMR1_IM26 /*!< Extended line 26 */ +#endif +#if defined(EXTI_IMR1_IM27) +#define LL_EXTI_LINE_27 EXTI_IMR1_IM27 /*!< Extended line 27 */ +#endif +#if defined(EXTI_IMR1_IM28) +#define LL_EXTI_LINE_28 EXTI_IMR1_IM28 /*!< Extended line 28 */ +#endif +#if defined(EXTI_IMR1_IM29) +#define LL_EXTI_LINE_29 EXTI_IMR1_IM29 /*!< Extended line 29 */ +#endif +#if defined(EXTI_IMR1_IM30) +#define LL_EXTI_LINE_30 EXTI_IMR1_IM30 /*!< Extended line 30 */ +#endif +#if defined(EXTI_IMR1_IM31) +#define LL_EXTI_LINE_31 EXTI_IMR1_IM31 /*!< Extended line 31 */ +#endif +#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR1_IM /*!< All Extended line not reserved*/ + +#define LL_EXTI_LINE_32 EXTI_IMR2_IM32 /*!< Extended line 32 */ +#if defined(EXTI_IMR2_IM33) +#define LL_EXTI_LINE_33 EXTI_IMR2_IM33 /*!< Extended line 33 */ +#endif +#if defined(EXTI_IMR2_IM34) +#define LL_EXTI_LINE_34 EXTI_IMR2_IM34 /*!< Extended line 34 */ +#endif +#if defined(EXTI_IMR2_IM35) +#define LL_EXTI_LINE_35 EXTI_IMR2_IM35 /*!< Extended line 35 */ +#endif +#if defined(EXTI_IMR2_IM36) +#define LL_EXTI_LINE_36 EXTI_IMR2_IM36 /*!< Extended line 36 */ +#endif +#if defined(EXTI_IMR2_IM37) +#define LL_EXTI_LINE_37 EXTI_IMR2_IM37 /*!< Extended line 37 */ +#endif +#if defined(EXTI_IMR2_IM38) +#define LL_EXTI_LINE_38 EXTI_IMR2_IM38 /*!< Extended line 38 */ +#endif +#if defined(EXTI_IMR2_IM39) +#define LL_EXTI_LINE_39 EXTI_IMR2_IM39 /*!< Extended line 39 */ +#endif +#if defined(EXTI_IMR2_IM40) +#define LL_EXTI_LINE_40 EXTI_IMR2_IM40 /*!< Extended line 40 */ +#endif +#define LL_EXTI_LINE_ALL_32_63 EXTI_IMR2_IM /*!< All Extended line not reserved*/ + + +#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */ + +#if defined(USE_FULL_LL_DRIVER) +#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** + * @} + */ + + +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup EXTI_LL_EC_MODE Mode + * @{ + */ +#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */ +#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */ +#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */ +/** + * @} + */ + +/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger + * @{ + */ +#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ +#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ +#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ +#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ + +/** + * @} + */ + + +#endif /*USE_FULL_LL_DRIVER*/ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in EXTI register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) + +/** + * @brief Read a value in EXTI register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) +/** + * @} + */ + + +/** + * @} + */ + + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions + * @{ + */ +/** @defgroup EXTI_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_EnableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR1, ExtiLine); +} +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63 + * @note The reset value for the direct lines (lines from 32 to 34, line + * 39) is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR2 IMx LL_EXTI_EnableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34(*) + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39(*) + * @arg @ref LL_EXTI_LINE_40(*) + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note (*): Available in some devices + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_DisableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63 + * @note The reset value for the direct lines (lines from 32 to 34, line + * 39) is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR2 IMx LL_EXTI_DisableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34(*) + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39(*) + * @arg @ref LL_EXTI_LINE_40(*) + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note (*): Available in some devices + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR2, ExtiLine); +} + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 + * @note The reset value for the direct or internal lines (see RM) + * is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR1 IMx LL_EXTI_IsEnabledIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63 + * @note The reset value for the direct lines (lines from 32 to 34, line + * 39) is set to 1 in order to enable the interrupt by default. + * Bits are set automatically at Power on. + * @rmtoll IMR2 IMx LL_EXTI_IsEnabledIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34(*) + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39(*) + * @arg @ref LL_EXTI_LINE_40(*) + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note (*): Available in some devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Event_Management Event_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_EnableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR1, ExtiLine); + +} + +/** + * @brief Enable ExtiLine Event request for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_EnableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34(*) + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39(*) + * @arg @ref LL_EXTI_LINE_40(*) + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note (*): Available in some devices + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_DisableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Event request for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_DisableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34(*) + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39(*) + * @arg @ref LL_EXTI_LINE_40(*) + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note (*): Available in some devices + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR2, ExtiLine); +} + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_IsEnabledEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); + +} + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_IsEnabledEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34(*) + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39(*) + * @arg @ref LL_EXTI_LINE_40(*) + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @note (*): Available in some devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_EnableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR1, ExtiLine); + +} + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set.Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR2 RTx LL_EXTI_EnableRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_DisableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR1, ExtiLine); + +} + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR2 RTx LL_EXTI_DisableRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR2, ExtiLine); +} + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll RTSR1 RTx LL_EXTI_IsEnabledRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 32 to 63 + * @rmtoll RTSR2 RTx LL_EXTI_IsEnabledRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR1 FTx LL_EXTI_EnableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR1, ExtiLine); +} + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR2 FTx LL_EXTI_EnableFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR1 FTx LL_EXTI_DisableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR2 FTx LL_EXTI_DisableFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR2, ExtiLine); +} + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll FTSR1 FTx LL_EXTI_IsEnabledFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 32 to 63 + * @rmtoll FTSR2 FTx LL_EXTI_IsEnabledFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management + * @{ + */ + +/** + * @brief Generate a software Interrupt Event for Lines in range 0 to 31 + * @note If the interrupt is enabled on this line in the EXTI_IMR1, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR1 + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR1 + * register (by writing a 1 into the bit) + * @rmtoll SWIER1 SWIx LL_EXTI_GenerateSWI_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER1, ExtiLine); +} + +/** + * @brief Generate a software Interrupt Event for Lines in range 32 to 63 + * @note If the interrupt is enabled on this line in the EXTI_IMR2, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR2 + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR2 + * register (by writing a 1 into the bit) + * @rmtoll SWIER2 SWIx LL_EXTI_GenerateSWI_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER2, ExtiLine); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management + * @{ + */ + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR1 PIFx LL_EXTI_IsActiveFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->PR1, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 32 to 63 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR2 PIFx LL_EXTI_IsActiveFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->PR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Read ExtLine Combination Flag for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR1 PIFx LL_EXTI_ReadFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->PR1, ExtiLine)); +} + +/** + * @brief Read ExtLine Combination Flag for Lines in range 32 to 63 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR2 PIFx LL_EXTI_ReadFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_32_63(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->PR2, ExtiLine)); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR1 PIFx LL_EXTI_ClearFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->PR1, ExtiLine); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 32 to 63 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR2 PIFx LL_EXTI_ClearFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFlag_32_63(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->PR2, ExtiLine); +} + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); +uint32_t LL_EXTI_DeInit(void); +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* EXTI */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_EXTI_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_gpio.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_gpio.h new file mode 100644 index 0000000..72bb307 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_gpio.h @@ -0,0 +1,1056 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_GPIO_H +#define STM32L4xx_LL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) + +/** @defgroup GPIO_LL GPIO + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-18.1_d - Medium: Array pointer `GPIOx' is accessed with index [..,..] + * which may be out of array bounds [..,UNKNOWN] in following APIs: + * LL_GPIO_GetAFPin_0_7 + * LL_GPIO_SetAFPin_0_7 + * LL_GPIO_SetAFPin_8_15 + * LL_GPIO_GetAFPin_8_15 + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros + * @{ + */ + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures + * @{ + */ + +/** + * @brief LL GPIO Init Structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_LL_EC_PIN */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_MODE. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_SPEED. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ + + uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ + + uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_PULL. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ + + uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_AF. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ +} LL_GPIO_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_LL_EC_PIN PIN + * @{ + */ +#define LL_GPIO_PIN_0 GPIO_BSRR_BS0 /*!< Select pin 0 */ +#define LL_GPIO_PIN_1 GPIO_BSRR_BS1 /*!< Select pin 1 */ +#define LL_GPIO_PIN_2 GPIO_BSRR_BS2 /*!< Select pin 2 */ +#define LL_GPIO_PIN_3 GPIO_BSRR_BS3 /*!< Select pin 3 */ +#define LL_GPIO_PIN_4 GPIO_BSRR_BS4 /*!< Select pin 4 */ +#define LL_GPIO_PIN_5 GPIO_BSRR_BS5 /*!< Select pin 5 */ +#define LL_GPIO_PIN_6 GPIO_BSRR_BS6 /*!< Select pin 6 */ +#define LL_GPIO_PIN_7 GPIO_BSRR_BS7 /*!< Select pin 7 */ +#define LL_GPIO_PIN_8 GPIO_BSRR_BS8 /*!< Select pin 8 */ +#define LL_GPIO_PIN_9 GPIO_BSRR_BS9 /*!< Select pin 9 */ +#define LL_GPIO_PIN_10 GPIO_BSRR_BS10 /*!< Select pin 10 */ +#define LL_GPIO_PIN_11 GPIO_BSRR_BS11 /*!< Select pin 11 */ +#define LL_GPIO_PIN_12 GPIO_BSRR_BS12 /*!< Select pin 12 */ +#define LL_GPIO_PIN_13 GPIO_BSRR_BS13 /*!< Select pin 13 */ +#define LL_GPIO_PIN_14 GPIO_BSRR_BS14 /*!< Select pin 14 */ +#define LL_GPIO_PIN_15 GPIO_BSRR_BS15 /*!< Select pin 15 */ +#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS0 | GPIO_BSRR_BS1 | GPIO_BSRR_BS2 | \ + GPIO_BSRR_BS3 | GPIO_BSRR_BS4 | GPIO_BSRR_BS5 | \ + GPIO_BSRR_BS6 | GPIO_BSRR_BS7 | GPIO_BSRR_BS8 | \ + GPIO_BSRR_BS9 | GPIO_BSRR_BS10 | GPIO_BSRR_BS11 | \ + GPIO_BSRR_BS12 | GPIO_BSRR_BS13 | GPIO_BSRR_BS14 | \ + GPIO_BSRR_BS15) /*!< Select all pins */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_MODE Mode + * @{ + */ +#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ +#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODE0_0 /*!< Select output mode */ +#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODE0_1 /*!< Select alternate function mode */ +#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODE0 /*!< Select analog mode */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_OUTPUT Output Type + * @{ + */ +#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ +#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT0 /*!< Select open-drain as output type */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_SPEED Output Speed + * @{ + */ +#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ +#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEED0_0 /*!< Select I/O medium output speed */ +#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEED0_1 /*!< Select I/O fast output speed */ +#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDR_OSPEED0 /*!< Select I/O high output speed */ +/** + * @} + */ +#define LL_GPIO_SPEED_LOW LL_GPIO_SPEED_FREQ_LOW +#define LL_GPIO_SPEED_MEDIUM LL_GPIO_SPEED_FREQ_MEDIUM +#define LL_GPIO_SPEED_FAST LL_GPIO_SPEED_FREQ_HIGH +#define LL_GPIO_SPEED_HIGH LL_GPIO_SPEED_FREQ_VERY_HIGH + +/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down + * @{ + */ +#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ +#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPD0_0 /*!< Select I/O pull up */ +#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPD0_1 /*!< Select I/O pull down */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_AF Alternate Function + * @{ + */ +#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ +#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ +#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ +#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ +#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ +#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ +#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ +#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ +#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */ +#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */ +#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */ +#define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */ +#define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */ +#define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */ +#define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */ +#define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration + * @{ + */ + +/** + * @brief Configure gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_SetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) +{ + MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODE0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U))); +} + +/** + * @brief Return gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_GetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->MODER, + (GPIO_MODER_MODE0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); +} + +/** + * @brief Configure gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @param OutputType This parameter can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) +{ + MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); +} + +/** + * @brief Return gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin)); +} + +/** + * @brief Configure gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Speed This parameter can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) +{ + MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDR_OSPEED0 << (POSITION_VAL(Pin) * 2U)), + (Speed << (POSITION_VAL(Pin) * 2U))); +} + +/** + * @brief Return gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, + (GPIO_OSPEEDR_OSPEED0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); +} + +/** + * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Pull This parameter can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) +{ + MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPD0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U))); +} + +/** + * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->PUPDR, + (GPIO_PUPDR_PUPD0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U)), + (Alternate << (POSITION_VAL(Pin) * 4U))); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[0], + (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U)), + (Alternate << (POSITION_VAL(Pin >> 8U) * 4U))); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[1], + (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U)); +} + +#if defined(GPIO_ASCR_ASC0) +/** + * @brief Connect analog switch to ADC input of several pins for a dedicated port. + * @note This bit must be set prior to the ADC conversion. + * Only the IO which connected to the ADC input are effective. + * Other IO must be kept reset value + * @rmtoll ASCR ASCy LL_GPIO_EnablePinAnalogControl + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_EnablePinAnalogControl(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + SET_BIT(GPIOx->ASCR, PinMask); +} + +/** + * @brief Disconnect analog switch to ADC input of several pins for a dedicated port. + * @rmtoll ASCR ASCy LL_GPIO_DisablePinAnalogControl + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_DisablePinAnalogControl(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + CLEAR_BIT(GPIOx->ASCR, PinMask); +} +#endif /* GPIO_ASCR_ASC0 */ + +/** + * @brief Lock configuration of several pins for a dedicated port. + * @note When the lock sequence has been applied on a port bit, the + * value of this port bit can no longer be modified until the + * next reset. + * @note Each lock bit freezes a specific configuration register + * (control and alternate function registers). + * @rmtoll LCKR LCKK LL_GPIO_LockPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + __IO uint32_t temp; + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + WRITE_REG(GPIOx->LCKR, PinMask); + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + temp = READ_REG(GPIOx->LCKR); + (void) temp; +} + +/** + * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. + * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. + * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked + * @param GPIOx GPIO Port + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) +{ + return ((READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup GPIO_LL_EF_Data_Access Data Access + * @{ + */ + +/** + * @brief Return full input data register value for a dedicated port. + * @rmtoll IDR IDy LL_GPIO_ReadInputPort + * @param GPIOx GPIO Port + * @retval Input data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->IDR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll IDR IDy LL_GPIO_IsInputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->IDR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Write output data register for the port. + * @rmtoll ODR ODy LL_GPIO_WriteOutputPort + * @param GPIOx GPIO Port + * @param PortValue Level value for each pin of the port + * @retval None + */ +__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) +{ + WRITE_REG(GPIOx->ODR, PortValue); +} + +/** + * @brief Return full output data register value for a dedicated port. + * @rmtoll ODR ODy LL_GPIO_ReadOutputPort + * @param GPIOx GPIO Port + * @retval Output data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->ODR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->ODR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Set several pins to high level on dedicated gpio port. + * @rmtoll BSRR BSy LL_GPIO_SetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, PinMask); +} + +/** + * @brief Set several pins to low level on dedicated gpio port. + * @rmtoll BRR BRy LL_GPIO_ResetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BRR, PinMask); +} + +/** + * @brief Toggle data value for several pin of dedicated port. + * @rmtoll ODR ODy LL_GPIO_TogglePin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + uint32_t odr = READ_REG(GPIOx->ODR); + WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_GPIO_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_i2c.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_i2c.h new file mode 100644 index 0000000..612bc76 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_i2c.h @@ -0,0 +1,2279 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_i2c.h + * @author MCD Application Team + * @brief Header file of I2C LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_I2C_H +#define STM32L4xx_LL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +#if defined (I2C1) || defined (I2C2) || defined (I2C3) || defined (I2C4) + +/** @defgroup I2C_LL I2C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_LL_Private_Constants I2C Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_Private_Macros I2C Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_ES_INIT I2C Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeripheralMode; /*!< Specifies the peripheral mode. + This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetMode(). */ + + uint32_t Timing; /*!< Specifies the SDA setup, hold time and the SCL high, low period values. + This parameter must be set by referring to the STM32CubeMX Tool and + the helper macro @ref __LL_I2C_CONVERT_TIMINGS(). + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetTiming(). */ + + uint32_t AnalogFilter; /*!< Enables or disables analog noise filter. + This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION. + + This feature can be modified afterwards using unitary functions + @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */ + + uint32_t DigitalFilter; /*!< Configures the digital noise filter. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetDigitalFilter(). */ + + uint32_t OwnAddress1; /*!< Specifies the device own address 1. + This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetOwnAddress1(). */ + + uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive + match code or next received byte. + This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_AcknowledgeNextData(). */ + + uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit). + This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetOwnAddress1(). */ +} LL_I2C_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_I2C_WriteReg function + * @{ + */ +#define LL_I2C_ICR_ADDRCF I2C_ICR_ADDRCF /*!< Address Matched flag */ +#define LL_I2C_ICR_NACKCF I2C_ICR_NACKCF /*!< Not Acknowledge flag */ +#define LL_I2C_ICR_STOPCF I2C_ICR_STOPCF /*!< Stop detection flag */ +#define LL_I2C_ICR_BERRCF I2C_ICR_BERRCF /*!< Bus error flag */ +#define LL_I2C_ICR_ARLOCF I2C_ICR_ARLOCF /*!< Arbitration Lost flag */ +#define LL_I2C_ICR_OVRCF I2C_ICR_OVRCF /*!< Overrun/Underrun flag */ +#define LL_I2C_ICR_PECCF I2C_ICR_PECCF /*!< PEC error flag */ +#define LL_I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF /*!< Timeout detection flag */ +#define LL_I2C_ICR_ALERTCF I2C_ICR_ALERTCF /*!< Alert flag */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2C_ReadReg function + * @{ + */ +#define LL_I2C_ISR_TXE I2C_ISR_TXE /*!< Transmit data register empty */ +#define LL_I2C_ISR_TXIS I2C_ISR_TXIS /*!< Transmit interrupt status */ +#define LL_I2C_ISR_RXNE I2C_ISR_RXNE /*!< Receive data register not empty */ +#define LL_I2C_ISR_ADDR I2C_ISR_ADDR /*!< Address matched (slave mode) */ +#define LL_I2C_ISR_NACKF I2C_ISR_NACKF /*!< Not Acknowledge received flag */ +#define LL_I2C_ISR_STOPF I2C_ISR_STOPF /*!< Stop detection flag */ +#define LL_I2C_ISR_TC I2C_ISR_TC /*!< Transfer Complete (master mode) */ +#define LL_I2C_ISR_TCR I2C_ISR_TCR /*!< Transfer Complete Reload */ +#define LL_I2C_ISR_BERR I2C_ISR_BERR /*!< Bus error */ +#define LL_I2C_ISR_ARLO I2C_ISR_ARLO /*!< Arbitration lost */ +#define LL_I2C_ISR_OVR I2C_ISR_OVR /*!< Overrun/Underrun (slave mode) */ +#define LL_I2C_ISR_PECERR I2C_ISR_PECERR /*!< PEC Error in reception (SMBus mode) */ +#define LL_I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT /*!< Timeout detection flag (SMBus mode) */ +#define LL_I2C_ISR_ALERT I2C_ISR_ALERT /*!< SMBus alert (SMBus mode) */ +#define LL_I2C_ISR_BUSY I2C_ISR_BUSY /*!< Bus busy */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_I2C_ReadReg and LL_I2C_WriteReg functions + * @{ + */ +#define LL_I2C_CR1_TXIE I2C_CR1_TXIE /*!< TX Interrupt enable */ +#define LL_I2C_CR1_RXIE I2C_CR1_RXIE /*!< RX Interrupt enable */ +#define LL_I2C_CR1_ADDRIE I2C_CR1_ADDRIE /*!< Address match Interrupt enable (slave only) */ +#define LL_I2C_CR1_NACKIE I2C_CR1_NACKIE /*!< Not acknowledge received Interrupt enable */ +#define LL_I2C_CR1_STOPIE I2C_CR1_STOPIE /*!< STOP detection Interrupt enable */ +#define LL_I2C_CR1_TCIE I2C_CR1_TCIE /*!< Transfer Complete interrupt enable */ +#define LL_I2C_CR1_ERRIE I2C_CR1_ERRIE /*!< Error interrupts enable */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode + * @{ + */ +#define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */ +#define LL_I2C_MODE_SMBUS_HOST I2C_CR1_SMBHEN /*!< SMBus Host address acknowledge */ +#define LL_I2C_MODE_SMBUS_DEVICE 0x00000000U /*!< SMBus Device default mode + (Default address not acknowledge) */ +#define LL_I2C_MODE_SMBUS_DEVICE_ARP I2C_CR1_SMBDEN /*!< SMBus Device Default address acknowledge */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ANALOGFILTER_SELECTION Analog Filter Selection + * @{ + */ +#define LL_I2C_ANALOGFILTER_ENABLE 0x00000000U /*!< Analog filter is enabled. */ +#define LL_I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF /*!< Analog filter is disabled. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRESSING_MODE Master Addressing Mode + * @{ + */ +#define LL_I2C_ADDRESSING_MODE_7BIT 0x00000000U /*!< Master operates in 7-bit addressing mode. */ +#define LL_I2C_ADDRESSING_MODE_10BIT I2C_CR2_ADD10 /*!< Master operates in 10-bit addressing mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS1 Own Address 1 Length + * @{ + */ +#define LL_I2C_OWNADDRESS1_7BIT 0x00000000U /*!< Own address 1 is a 7-bit address. */ +#define LL_I2C_OWNADDRESS1_10BIT I2C_OAR1_OA1MODE /*!< Own address 1 is a 10-bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS2 Own Address 2 Masks + * @{ + */ +#define LL_I2C_OWNADDRESS2_NOMASK I2C_OAR2_OA2NOMASK /*!< Own Address2 No mask. */ +#define LL_I2C_OWNADDRESS2_MASK01 I2C_OAR2_OA2MASK01 /*!< Only Address2 bits[7:2] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK02 I2C_OAR2_OA2MASK02 /*!< Only Address2 bits[7:3] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK03 I2C_OAR2_OA2MASK03 /*!< Only Address2 bits[7:4] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK04 I2C_OAR2_OA2MASK04 /*!< Only Address2 bits[7:5] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK05 I2C_OAR2_OA2MASK05 /*!< Only Address2 bits[7:6] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK06 I2C_OAR2_OA2MASK06 /*!< Only Address2 bits[7] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK07 I2C_OAR2_OA2MASK07 /*!< No comparison is done. + All Address2 are acknowledged. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_I2C_ACKNOWLEDGE Acknowledge Generation + * @{ + */ +#define LL_I2C_ACK 0x00000000U /*!< ACK is sent after current received byte. */ +#define LL_I2C_NACK I2C_CR2_NACK /*!< NACK is sent after current received byte.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRSLAVE Slave Address Length + * @{ + */ +#define LL_I2C_ADDRSLAVE_7BIT 0x00000000U /*!< Slave Address in 7-bit. */ +#define LL_I2C_ADDRSLAVE_10BIT I2C_CR2_ADD10 /*!< Slave Address in 10-bit.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_REQUEST Transfer Request Direction + * @{ + */ +#define LL_I2C_REQUEST_WRITE 0x00000000U /*!< Master request a write transfer. */ +#define LL_I2C_REQUEST_READ I2C_CR2_RD_WRN /*!< Master request a read transfer. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_MODE Transfer End Mode + * @{ + */ +#define LL_I2C_MODE_RELOAD I2C_CR2_RELOAD /*!< Enable I2C Reload mode. */ +#define LL_I2C_MODE_AUTOEND I2C_CR2_AUTOEND /*!< Enable I2C Automatic end mode + with no HW PEC comparison. */ +#define LL_I2C_MODE_SOFTEND 0x00000000U /*!< Enable I2C Software end mode + with no HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_RELOAD LL_I2C_MODE_RELOAD /*!< Enable SMBUS Automatic end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC LL_I2C_MODE_AUTOEND /*!< Enable SMBUS Automatic end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC LL_I2C_MODE_SOFTEND /*!< Enable SMBUS Software end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC (uint32_t)(LL_I2C_MODE_AUTOEND | I2C_CR2_PECBYTE) +/*!< Enable SMBUS Automatic end mode with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC (uint32_t)(LL_I2C_MODE_SOFTEND | I2C_CR2_PECBYTE) +/*!< Enable SMBUS Software end mode with HW PEC comparison. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GENERATE Start And Stop Generation + * @{ + */ +#define LL_I2C_GENERATE_NOSTARTSTOP 0x00000000U +/*!< Don't Generate Stop and Start condition. */ +#define LL_I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +/*!< Generate Stop condition (Size should be set to 0). */ +#define LL_I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +/*!< Generate Start for read request. */ +#define LL_I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Start for write request. */ +#define LL_I2C_GENERATE_RESTART_7BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +/*!< Generate Restart for read request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_7BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Restart for write request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | \ + I2C_CR2_RD_WRN | I2C_CR2_HEAD10R) +/*!< Generate Restart for read request, slave 10Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Restart for write request, slave 10Bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DIRECTION Read Write Direction + * @{ + */ +#define LL_I2C_DIRECTION_WRITE 0x00000000U /*!< Write transfer request by master, + slave enters receiver mode. */ +#define LL_I2C_DIRECTION_READ I2C_ISR_DIR /*!< Read transfer request by master, + slave enters transmitter mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_I2C_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for + transmission */ +#define LL_I2C_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for + reception */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUTA_MODE SMBus TimeoutA Mode SCL SDA Timeout + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW 0x00000000U /*!< TimeoutA is used to detect + SCL low level timeout. */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH I2C_TIMEOUTR_TIDLE /*!< TimeoutA is used to detect + both SCL and SDA high level timeout.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUT_SELECTION SMBus Timeout Selection + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA I2C_TIMEOUTR_TIMOUTEN /*!< TimeoutA enable bit */ +#define LL_I2C_SMBUS_TIMEOUTB I2C_TIMEOUTR_TEXTEN /*!< TimeoutB (extended clock) + enable bit */ +#define LL_I2C_SMBUS_ALL_TIMEOUT (uint32_t)(I2C_TIMEOUTR_TIMOUTEN | \ + I2C_TIMEOUTR_TEXTEN) /*!< TimeoutA and TimeoutB +(extended clock) enable bits */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @defgroup I2C_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup I2C_LL_EM_CONVERT_TIMINGS Convert SDA SCL timings + * @{ + */ +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @param __PRESCALER__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + * @param __SETUP_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + (tscldel = (SCLDEL+1)xtpresc) + * @param __HOLD_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + (tsdadel = SDADELxtpresc) + * @param __SCLH_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + (tsclh = (SCLH+1)xtpresc) + * @param __SCLL_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + (tscll = (SCLL+1)xtpresc) + * @retval Value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +#define __LL_I2C_CONVERT_TIMINGS(__PRESCALER__, __SETUP_TIME__, __HOLD_TIME__, __SCLH_PERIOD__, __SCLL_PERIOD__) \ + ((((uint32_t)(__PRESCALER__) << I2C_TIMINGR_PRESC_Pos) & I2C_TIMINGR_PRESC) | \ + (((uint32_t)(__SETUP_TIME__) << I2C_TIMINGR_SCLDEL_Pos) & I2C_TIMINGR_SCLDEL) | \ + (((uint32_t)(__HOLD_TIME__) << I2C_TIMINGR_SDADEL_Pos) & I2C_TIMINGR_SDADEL) | \ + (((uint32_t)(__SCLH_PERIOD__) << I2C_TIMINGR_SCLH_Pos) & I2C_TIMINGR_SCLH) | \ + (((uint32_t)(__SCLL_PERIOD__) << I2C_TIMINGR_SCLL_Pos) & I2C_TIMINGR_SCLL)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable I2C peripheral (PE = 1). + * @rmtoll CR1 PE LL_I2C_Enable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Enable(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Disable I2C peripheral (PE = 0). + * @note When PE = 0, the I2C SCL and SDA lines are released. + * Internal state machines and status bits are put back to their reset value. + * When cleared, PE must be kept low for at least 3 APB clock cycles. + * @rmtoll CR1 PE LL_I2C_Disable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Disable(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Check if the I2C peripheral is enabled or disabled. + * @rmtoll CR1 PE LL_I2C_IsEnabled + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabled(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PE) == (I2C_CR1_PE)) ? 1UL : 0UL); +} + +/** + * @brief Configure Noise Filters (Analog and Digital). + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * The filters can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_ConfigFilters\n + * CR1 DNF LL_I2C_ConfigFilters + * @param I2Cx I2C Instance. + * @param AnalogFilter This parameter can be one of the following values: + * @arg @ref LL_I2C_ANALOGFILTER_ENABLE + * @arg @ref LL_I2C_ANALOGFILTER_DISABLE + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) + and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigFilters(I2C_TypeDef *I2Cx, uint32_t AnalogFilter, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_ANFOFF | I2C_CR1_DNF, AnalogFilter | (DigitalFilter << I2C_CR1_DNF_Pos)); +} + +/** + * @brief Configure Digital Noise Filter. + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 DNF LL_I2C_SetDigitalFilter + * @param I2Cx I2C Instance. + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) + and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetDigitalFilter(I2C_TypeDef *I2Cx, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_DNF, DigitalFilter << I2C_CR1_DNF_Pos); +} + +/** + * @brief Get the current Digital Noise Filter configuration. + * @rmtoll CR1 DNF LL_I2C_GetDigitalFilter + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDigitalFilter(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_DNF) >> I2C_CR1_DNF_Pos); +} + +/** + * @brief Enable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_EnableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAnalogFilter(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Disable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_DisableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAnalogFilter(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Check if Analog Noise Filter is enabled or disabled. + * @rmtoll CR1 ANFOFF LL_I2C_IsEnabledAnalogFilter + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAnalogFilter(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ANFOFF) != (I2C_CR1_ANFOFF)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_EnableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Disable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_DisableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Check if DMA transmission requests are enabled or disabled. + * @rmtoll CR1 TXDMAEN LL_I2C_IsEnabledDMAReq_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_TX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN) == (I2C_CR1_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_EnableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Disable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_DisableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Check if DMA reception requests are enabled or disabled. + * @rmtoll CR1 RXDMAEN LL_I2C_IsEnabledDMAReq_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_RX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN) == (I2C_CR1_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll TXDR TXDATA LL_I2C_DMA_GetRegAddr\n + * RXDR RXDATA LL_I2C_DMA_GetRegAddr + * @param I2Cx I2C Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_I2C_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_I2C_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_I2C_DMA_GetRegAddr(const I2C_TypeDef *I2Cx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_I2C_DMA_REG_DATA_TRANSMIT) + { + /* return address of TXDR register */ + data_reg_addr = (uint32_t) &(I2Cx->TXDR); + } + else + { + /* return address of RXDR register */ + data_reg_addr = (uint32_t) &(I2Cx->RXDR); + } + + return data_reg_addr; +} + +/** + * @brief Enable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_EnableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableClockStretching(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Disable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_DisableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableClockStretching(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Check if Clock stretching is enabled or disabled. + * @rmtoll CR1 NOSTRETCH LL_I2C_IsEnabledClockStretching + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledClockStretching(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH) != (I2C_CR1_NOSTRETCH)) ? 1UL : 0UL); +} + +/** + * @brief Enable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_EnableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Disable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_DisableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Check if hardware byte control in slave mode is enabled or disabled. + * @rmtoll CR1 SBC LL_I2C_IsEnabledSlaveByteControl + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSlaveByteControl(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_SBC) == (I2C_CR1_SBC)) ? 1UL : 0UL); +} + +/** + * @brief Enable Wakeup from STOP. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @note This bit can only be programmed when Digital Filter is disabled. + * @rmtoll CR1 WUPEN LL_I2C_EnableWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_WUPEN); +} + +/** + * @brief Disable Wakeup from STOP. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @rmtoll CR1 WUPEN LL_I2C_DisableWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableWakeUpFromStop(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_WUPEN); +} + +/** + * @brief Check if Wakeup from STOP is enabled or disabled. + * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not + * WakeUpFromStop feature is supported by the I2Cx Instance. + * @rmtoll CR1 WUPEN LL_I2C_IsEnabledWakeUpFromStop + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledWakeUpFromStop(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_WUPEN) == (I2C_CR1_WUPEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable General Call. + * @note When enabled the Address 0x00 is ACKed. + * @rmtoll CR1 GCEN LL_I2C_EnableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableGeneralCall(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Disable General Call. + * @note When disabled the Address 0x00 is NACKed. + * @rmtoll CR1 GCEN LL_I2C_DisableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableGeneralCall(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Check if General Call is enabled or disabled. + * @rmtoll CR1 GCEN LL_I2C_IsEnabledGeneralCall + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledGeneralCall(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_GCEN) == (I2C_CR1_GCEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the Master to operate in 7-bit or 10-bit addressing mode. + * @note Changing this bit is not allowed, when the START bit is set. + * @rmtoll CR2 ADD10 LL_I2C_SetMasterAddressingMode + * @param I2Cx I2C Instance. + * @param AddressingMode This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMasterAddressingMode(I2C_TypeDef *I2Cx, uint32_t AddressingMode) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_ADD10, AddressingMode); +} + +/** + * @brief Get the Master addressing mode. + * @rmtoll CR2 ADD10 LL_I2C_GetMasterAddressingMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + */ +__STATIC_INLINE uint32_t LL_I2C_GetMasterAddressingMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_ADD10)); +} + +/** + * @brief Set the Own Address1. + * @rmtoll OAR1 OA1 LL_I2C_SetOwnAddress1\n + * OAR1 OA1MODE LL_I2C_SetOwnAddress1 + * @param I2Cx I2C Instance. + * @param OwnAddress1 This parameter must be a value between Min_Data=0 and Max_Data=0x3FF. + * @param OwnAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS1_7BIT + * @arg @ref LL_I2C_OWNADDRESS1_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress1(I2C_TypeDef *I2Cx, uint32_t OwnAddress1, uint32_t OwnAddrSize) +{ + MODIFY_REG(I2Cx->OAR1, I2C_OAR1_OA1 | I2C_OAR1_OA1MODE, OwnAddress1 | OwnAddrSize); +} + +/** + * @brief Enable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_EnableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress1(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Disable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_DisableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress1(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR1 OA1EN LL_I2C_IsEnabledOwnAddress1 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress1(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN) == (I2C_OAR1_OA1EN)) ? 1UL : 0UL); +} + +/** + * @brief Set the 7bits Own Address2. + * @note This action has no effect if own address2 is enabled. + * @rmtoll OAR2 OA2 LL_I2C_SetOwnAddress2\n + * OAR2 OA2MSK LL_I2C_SetOwnAddress2 + * @param I2Cx I2C Instance. + * @param OwnAddress2 Value between Min_Data=0 and Max_Data=0x7F. + * @param OwnAddrMask This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS2_NOMASK + * @arg @ref LL_I2C_OWNADDRESS2_MASK01 + * @arg @ref LL_I2C_OWNADDRESS2_MASK02 + * @arg @ref LL_I2C_OWNADDRESS2_MASK03 + * @arg @ref LL_I2C_OWNADDRESS2_MASK04 + * @arg @ref LL_I2C_OWNADDRESS2_MASK05 + * @arg @ref LL_I2C_OWNADDRESS2_MASK06 + * @arg @ref LL_I2C_OWNADDRESS2_MASK07 + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress2(I2C_TypeDef *I2Cx, uint32_t OwnAddress2, uint32_t OwnAddrMask) +{ + MODIFY_REG(I2Cx->OAR2, I2C_OAR2_OA2 | I2C_OAR2_OA2MSK, OwnAddress2 | OwnAddrMask); +} + +/** + * @brief Enable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_EnableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress2(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Disable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_DisableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress2(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR2 OA2EN LL_I2C_IsEnabledOwnAddress2 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress2(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN) == (I2C_OAR2_OA2EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll TIMINGR TIMINGR LL_I2C_SetTiming + * @param I2Cx I2C Instance. + * @param Timing This parameter must be a value between Min_Data=0 and Max_Data=0xFFFFFFFF. + * @note This parameter is computed with the STM32CubeMX Tool. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTiming(I2C_TypeDef *I2Cx, uint32_t Timing) +{ + WRITE_REG(I2Cx->TIMINGR, Timing); +} + +/** + * @brief Get the Timing Prescaler setting. + * @rmtoll TIMINGR PRESC LL_I2C_GetTimingPrescaler + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTimingPrescaler(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_PRESC) >> I2C_TIMINGR_PRESC_Pos); +} + +/** + * @brief Get the SCL low period setting. + * @rmtoll TIMINGR SCLL LL_I2C_GetClockLowPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockLowPeriod(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLL) >> I2C_TIMINGR_SCLL_Pos); +} + +/** + * @brief Get the SCL high period setting. + * @rmtoll TIMINGR SCLH LL_I2C_GetClockHighPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockHighPeriod(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLH) >> I2C_TIMINGR_SCLH_Pos); +} + +/** + * @brief Get the SDA hold time. + * @rmtoll TIMINGR SDADEL LL_I2C_GetDataHoldTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataHoldTime(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SDADEL) >> I2C_TIMINGR_SDADEL_Pos); +} + +/** + * @brief Get the SDA setup time. + * @rmtoll TIMINGR SCLDEL LL_I2C_GetDataSetupTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataSetupTime(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLDEL) >> I2C_TIMINGR_SCLDEL_Pos); +} + +/** + * @brief Configure peripheral mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_SetMode\n + * CR1 SMBDEN LL_I2C_SetMode + * @param I2Cx I2C Instance. + * @param PeripheralMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMode(I2C_TypeDef *I2Cx, uint32_t PeripheralMode) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN, PeripheralMode); +} + +/** + * @brief Get peripheral mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_GetMode\n + * CR1 SMBDEN LL_I2C_GetMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + */ +__STATIC_INLINE uint32_t LL_I2C_GetMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN)); +} + +/** + * @brief Enable SMBus alert (Host or Device mode) + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is drived low and + * Alert Response Address Header acknowledge is enabled. + * SMBus Host mode: + * - SMBus Alert pin management is supported. + * @rmtoll CR1 ALERTEN LL_I2C_EnableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusAlert(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Disable SMBus alert (Host or Device mode) + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is not drived (can be used as a standard GPIO) and + * Alert Response Address Header acknowledge is disabled. + * SMBus Host mode: + * - SMBus Alert pin management is not supported. + * @rmtoll CR1 ALERTEN LL_I2C_DisableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusAlert(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Check if SMBus alert (Host or Device mode) is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ALERTEN LL_I2C_IsEnabledSMBusAlert + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusAlert(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ALERTEN) == (I2C_CR1_ALERTEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SMBus Packet Error Calculation (PEC). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_EnableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPEC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Disable SMBus Packet Error Calculation (PEC). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_DisableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusPEC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_IsEnabledSMBusPEC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPEC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PECEN) == (I2C_CR1_PECEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This configuration can only be programmed when associated Timeout is disabled (TimeoutA and/orTimeoutB). + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIDLE LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIMEOUTB LL_I2C_ConfigSMBusTimeout + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @param TimeoutB + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t TimeoutA, uint32_t TimeoutAMode, + uint32_t TimeoutB) +{ + MODIFY_REG(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA | I2C_TIMEOUTR_TIDLE | I2C_TIMEOUTR_TIMEOUTB, + TimeoutA | TimeoutAMode | (TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos)); +} + +/** + * @brief Configure the SMBus Clock TimeoutA (SCL low timeout or SCL and SDA high timeout depends on TimeoutA mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_SetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutA(I2C_TypeDef *I2Cx, uint32_t TimeoutA) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutA); +} + +/** + * @brief Get the SMBus Clock TimeoutA setting. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_GetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutA(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA)); +} + +/** + * @brief Set the SMBus Clock TimeoutA mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This bit can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIDLE LL_I2C_SetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutAMode(I2C_TypeDef *I2Cx, uint32_t TimeoutAMode) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutAMode); +} + +/** + * @brief Get the SMBus Clock TimeoutA mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIDLE LL_I2C_GetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutAMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIDLE)); +} + +/** + * @brief Configure the SMBus Extended Cumulative Clock TimeoutB (Master or Slave mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutB is disabled. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_SetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @param TimeoutB This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutB(I2C_TypeDef *I2Cx, uint32_t TimeoutB) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Get the SMBus Extended Cumulative Clock TimeoutB setting. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_GetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutB(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTB) >> I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Enable the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_EnableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_EnableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + SET_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Disable the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_DisableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_DisableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + CLEAR_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Check if the SMBus Clock Timeout is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_IsEnabledSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_IsEnabledSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusTimeout(const I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + return ((READ_BIT(I2Cx->TIMEOUTR, (I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN)) == \ + (ClockTimeout)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_EnableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Disable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_DisableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Check if the TXIS Interrupt is enabled or disabled. + * @rmtoll CR1 TXIE LL_I2C_IsEnabledIT_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXIE) == (I2C_CR1_TXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_EnableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Disable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_DisableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Check if the RXNE Interrupt is enabled or disabled. + * @rmtoll CR1 RXIE LL_I2C_IsEnabledIT_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_RX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXIE) == (I2C_CR1_RXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_EnableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Disable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_DisableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ADDR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Check if Address match interrupt is enabled or disabled. + * @rmtoll CR1 ADDRIE LL_I2C_IsEnabledIT_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ADDR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ADDRIE) == (I2C_CR1_ADDRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_EnableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Disable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_DisableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_NACK(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Check if Not acknowledge received interrupt is enabled or disabled. + * @rmtoll CR1 NACKIE LL_I2C_IsEnabledIT_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_NACK(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NACKIE) == (I2C_CR1_NACKIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_EnableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Disable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_DisableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_STOP(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Check if STOP detection interrupt is enabled or disabled. + * @rmtoll CR1 STOPIE LL_I2C_IsEnabledIT_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_STOP(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_STOPIE) == (I2C_CR1_STOPIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_EnableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Disable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_DisableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Check if Transfer Complete interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_I2C_IsEnabledIT_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TCIE) == (I2C_CR1_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Error interrupts. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_EnableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Disable Error interrupts. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_DisableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ERR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Check if Error interrupts are enabled or disabled. + * @rmtoll CR1 ERRIE LL_I2C_IsEnabledIT_ERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ERRIE) == (I2C_CR1_ERRIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_FLAG_management FLAG_management + * @{ + */ + +/** + * @brief Indicate the status of Transmit data register empty flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXE LL_I2C_IsActiveFlag_TXE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXE(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXE) == (I2C_ISR_TXE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transmit interrupt flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXIS LL_I2C_IsActiveFlag_TXIS + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXIS(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXIS) == (I2C_ISR_TXIS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Receive data register not empty flag. + * @note RESET: When Receive data register is read. + * SET: When the received data is copied in Receive data register. + * @rmtoll ISR RXNE LL_I2C_IsActiveFlag_RXNE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_RXNE(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_RXNE) == (I2C_ISR_RXNE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Address matched flag (slave mode). + * @note RESET: Clear default value. + * SET: When the received slave address matched with one of the enabled slave address. + * @rmtoll ISR ADDR LL_I2C_IsActiveFlag_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADDR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ADDR) == (I2C_ISR_ADDR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Not Acknowledge received flag. + * @note RESET: Clear default value. + * SET: When a NACK is received after a byte transmission. + * @rmtoll ISR NACKF LL_I2C_IsActiveFlag_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_NACK(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_NACKF) == (I2C_ISR_NACKF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Stop detection flag. + * @note RESET: Clear default value. + * SET: When a Stop condition is detected. + * @rmtoll ISR STOPF LL_I2C_IsActiveFlag_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_STOP(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_STOPF) == (I2C_ISR_STOPF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=0, AUTOEND=0 and NBYTES date have been transferred. + * @rmtoll ISR TC LL_I2C_IsActiveFlag_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TC) == (I2C_ISR_TC)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=1 and NBYTES date have been transferred. + * @rmtoll ISR TCR LL_I2C_IsActiveFlag_TCR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TCR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TCR) == (I2C_ISR_TCR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus error flag. + * @note RESET: Clear default value. + * SET: When a misplaced Start or Stop condition is detected. + * @rmtoll ISR BERR LL_I2C_IsActiveFlag_BERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BERR) == (I2C_ISR_BERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Arbitration lost flag. + * @note RESET: Clear default value. + * SET: When arbitration lost. + * @rmtoll ISR ARLO LL_I2C_IsActiveFlag_ARLO + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ARLO(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ARLO) == (I2C_ISR_ARLO)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Overrun/Underrun flag (slave mode). + * @note RESET: Clear default value. + * SET: When an overrun/underrun error occurs (Clock Stretching Disabled). + * @rmtoll ISR OVR LL_I2C_IsActiveFlag_OVR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_OVR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_OVR) == (I2C_ISR_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus PEC error flag in reception. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When the received PEC does not match with the PEC register content. + * @rmtoll ISR PECERR LL_I2C_IsActiveSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_PECERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_PECERR) == (I2C_ISR_PECERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus Timeout detection flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When a timeout or extended clock timeout occurs. + * @rmtoll ISR TIMEOUT LL_I2C_IsActiveSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_TIMEOUT(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TIMEOUT) == (I2C_ISR_TIMEOUT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus alert flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When SMBus host configuration, SMBus alert enabled and + * a falling edge event occurs on SMBA pin. + * @rmtoll ISR ALERT LL_I2C_IsActiveSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_ALERT(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ALERT) == (I2C_ISR_ALERT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus Busy flag. + * @note RESET: Clear default value. + * SET: When a Start condition is detected. + * @rmtoll ISR BUSY LL_I2C_IsActiveFlag_BUSY + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BUSY(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BUSY) == (I2C_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Clear Address Matched flag. + * @rmtoll ICR ADDRCF LL_I2C_ClearFlag_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ADDRCF); +} + +/** + * @brief Clear Not Acknowledge flag. + * @rmtoll ICR NACKCF LL_I2C_ClearFlag_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_NACKCF); +} + +/** + * @brief Clear Stop detection flag. + * @rmtoll ICR STOPCF LL_I2C_ClearFlag_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_STOPCF); +} + +/** + * @brief Clear Transmit data register empty flag (TXE). + * @note This bit can be clear by software in order to flush the transmit data register (TXDR). + * @rmtoll ISR TXE LL_I2C_ClearFlag_TXE + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_TXE(I2C_TypeDef *I2Cx) +{ + WRITE_REG(I2Cx->ISR, I2C_ISR_TXE); +} + +/** + * @brief Clear Bus error flag. + * @rmtoll ICR BERRCF LL_I2C_ClearFlag_BERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_BERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_BERRCF); +} + +/** + * @brief Clear Arbitration lost flag. + * @rmtoll ICR ARLOCF LL_I2C_ClearFlag_ARLO + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ARLO(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ARLOCF); +} + +/** + * @brief Clear Overrun/Underrun flag. + * @rmtoll ICR OVRCF LL_I2C_ClearFlag_OVR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_OVR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_OVRCF); +} + +/** + * @brief Clear SMBus PEC error flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR PECCF LL_I2C_ClearSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_PECERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_PECCF); +} + +/** + * @brief Clear SMBus Timeout detection flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR TIMOUTCF LL_I2C_ClearSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_TIMOUTCF); +} + +/** + * @brief Clear SMBus Alert flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR ALERTCF LL_I2C_ClearSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_ALERT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ALERTCF); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Enable automatic STOP condition generation (master mode). + * @note Automatic end mode : a STOP condition is automatically sent when NBYTES data are transferred. + * This bit has no effect in slave mode or when RELOAD bit is set. + * @rmtoll CR2 AUTOEND LL_I2C_EnableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAutoEndMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Disable automatic STOP condition generation (master mode). + * @note Software end mode : TC flag is set when NBYTES data are transferre, stretching SCL low. + * @rmtoll CR2 AUTOEND LL_I2C_DisableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAutoEndMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Check if automatic STOP condition is enabled or disabled. + * @rmtoll CR2 AUTOEND LL_I2C_IsEnabledAutoEndMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAutoEndMode(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_AUTOEND) == (I2C_CR2_AUTOEND)) ? 1UL : 0UL); +} + +/** + * @brief Enable reload mode (master mode). + * @note The transfer is not completed after the NBYTES data transfer, NBYTES will be reloaded when TCR flag is set. + * @rmtoll CR2 RELOAD LL_I2C_EnableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableReloadMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Disable reload mode (master mode). + * @note The transfer is completed after the NBYTES data transfer(STOP or RESTART will follow). + * @rmtoll CR2 RELOAD LL_I2C_DisableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableReloadMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Check if reload mode is enabled or disabled. + * @rmtoll CR2 RELOAD LL_I2C_IsEnabledReloadMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledReloadMode(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_RELOAD) == (I2C_CR2_RELOAD)) ? 1UL : 0UL); +} + +/** + * @brief Configure the number of bytes for transfer. + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 NBYTES LL_I2C_SetTransferSize + * @param I2Cx I2C Instance. + * @param TransferSize This parameter must be a value between Min_Data=0x00 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferSize(I2C_TypeDef *I2Cx, uint32_t TransferSize) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NBYTES, TransferSize << I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Get the number of bytes configured for transfer. + * @rmtoll CR2 NBYTES LL_I2C_GetTransferSize + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferSize(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_NBYTES) >> I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code + or next received byte. + * @note Usage in Slave mode only. + * @rmtoll CR2 NACK LL_I2C_AcknowledgeNextData + * @param I2Cx I2C Instance. + * @param TypeAcknowledge This parameter can be one of the following values: + * @arg @ref LL_I2C_ACK + * @arg @ref LL_I2C_NACK + * @retval None + */ +__STATIC_INLINE void LL_I2C_AcknowledgeNextData(I2C_TypeDef *I2Cx, uint32_t TypeAcknowledge) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NACK, TypeAcknowledge); +} + +/** + * @brief Generate a START or RESTART condition + * @note The START bit can be set even if bus is BUSY or I2C is in slave mode. + * This action has no effect when RELOAD is set. + * @rmtoll CR2 START LL_I2C_GenerateStartCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStartCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_START); +} + +/** + * @brief Generate a STOP condition after the current byte transfer (master mode). + * @rmtoll CR2 STOP LL_I2C_GenerateStopCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStopCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_STOP); +} + +/** + * @brief Enable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master sends the complete 10bit slave address read sequence : + * Start + 2 bytes 10bit address in Write direction + Restart + first 7 bits of 10bit address + in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_EnableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Disable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master only sends the first 7 bits of 10bit address in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_DisableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Check if automatic RESTART Read request condition for 10bit address header is enabled or disabled. + * @rmtoll CR2 HEAD10R LL_I2C_IsEnabledAuto10BitRead + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAuto10BitRead(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_HEAD10R) != (I2C_CR2_HEAD10R)) ? 1UL : 0UL); +} + +/** + * @brief Configure the transfer direction (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 RD_WRN LL_I2C_SetTransferRequest + * @param I2Cx I2C Instance. + * @param TransferRequest This parameter can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferRequest(I2C_TypeDef *I2Cx, uint32_t TransferRequest) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_RD_WRN, TransferRequest); +} + +/** + * @brief Get the transfer direction requested (master mode). + * @rmtoll CR2 RD_WRN LL_I2C_GetTransferRequest + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferRequest(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_RD_WRN)); +} + +/** + * @brief Configure the slave address for transfer (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 SADD LL_I2C_SetSlaveAddr + * @param I2Cx I2C Instance. + * @param SlaveAddr This parameter must be a value between Min_Data=0x00 and Max_Data=0x3F. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSlaveAddr(I2C_TypeDef *I2Cx, uint32_t SlaveAddr) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD, SlaveAddr); +} + +/** + * @brief Get the slave address programmed for transfer. + * @rmtoll CR2 SADD LL_I2C_GetSlaveAddr + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetSlaveAddr(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_SADD)); +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @rmtoll CR2 SADD LL_I2C_HandleTransfer\n + * CR2 ADD10 LL_I2C_HandleTransfer\n + * CR2 RD_WRN LL_I2C_HandleTransfer\n + * CR2 START LL_I2C_HandleTransfer\n + * CR2 STOP LL_I2C_HandleTransfer\n + * CR2 RELOAD LL_I2C_HandleTransfer\n + * CR2 NBYTES LL_I2C_HandleTransfer\n + * CR2 AUTOEND LL_I2C_HandleTransfer\n + * CR2 HEAD10R LL_I2C_HandleTransfer + * @param I2Cx I2C Instance. + * @param SlaveAddr Specifies the slave address to be programmed. + * @param SlaveAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRSLAVE_7BIT + * @arg @ref LL_I2C_ADDRSLAVE_10BIT + * @param TransferSize Specifies the number of bytes to be programmed. + * This parameter must be a value between Min_Data=0 and Max_Data=255. + * @param EndMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_RELOAD + * @arg @ref LL_I2C_MODE_AUTOEND + * @arg @ref LL_I2C_MODE_SOFTEND + * @arg @ref LL_I2C_MODE_SMBUS_RELOAD + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC + * @param Request This parameter can be one of the following values: + * @arg @ref LL_I2C_GENERATE_NOSTARTSTOP + * @arg @ref LL_I2C_GENERATE_STOP + * @arg @ref LL_I2C_GENERATE_START_READ + * @arg @ref LL_I2C_GENERATE_START_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_WRITE + * @retval None + */ +__STATIC_INLINE void LL_I2C_HandleTransfer(I2C_TypeDef *I2Cx, uint32_t SlaveAddr, uint32_t SlaveAddrSize, + uint32_t TransferSize, uint32_t EndMode, uint32_t Request) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)SlaveAddr & I2C_CR2_SADD) | \ + ((uint32_t)SlaveAddrSize & I2C_CR2_ADD10) | \ + (((uint32_t)TransferSize << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)EndMode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD | I2C_CR2_ADD10 | + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | + I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_RELOAD | + I2C_CR2_NBYTES | I2C_CR2_AUTOEND | I2C_CR2_HEAD10R, + tmp); +} + +/** + * @brief Indicate the value of transfer direction (slave mode). + * @note RESET: Write transfer, Slave enters in receiver mode. + * SET: Read transfer, Slave enters in transmitter mode. + * @rmtoll ISR DIR LL_I2C_GetTransferDirection + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_DIRECTION_WRITE + * @arg @ref LL_I2C_DIRECTION_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferDirection(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_DIR)); +} + +/** + * @brief Return the slave matched address. + * @rmtoll ISR ADDCODE LL_I2C_GetAddressMatchCode + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetAddressMatchCode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_ADDCODE) >> I2C_ISR_ADDCODE_Pos << 1); +} + +/** + * @brief Enable internal comparison of the SMBus Packet Error byte (transmission or reception mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This feature is cleared by hardware when the PEC byte is transferred, or when a STOP condition + or an Address Matched is received. + * This bit has no effect when RELOAD bit is set. + * This bit has no effect in device mode when SBC bit is not set. + * @rmtoll CR2 PECBYTE LL_I2C_EnableSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_PECBYTE); +} + +/** + * @brief Check if the SMBus Packet Error byte internal comparison is requested or not. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR2 PECBYTE LL_I2C_IsEnabledSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPECCompare(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_PECBYTE) == (I2C_CR2_PECBYTE)) ? 1UL : 0UL); +} + +/** + * @brief Get the SMBus Packet Error byte calculated. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll PECR PEC LL_I2C_GetSMBusPEC + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusPEC(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->PECR, I2C_PECR_PEC)); +} + +/** + * @brief Read Receive Data register. + * @rmtoll RXDR RXDATA LL_I2C_ReceiveData8 + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_I2C_ReceiveData8(const I2C_TypeDef *I2Cx) +{ + return (uint8_t)(READ_BIT(I2Cx->RXDR, I2C_RXDR_RXDATA)); +} + +/** + * @brief Write in Transmit Data Register . + * @rmtoll TXDR TXDATA LL_I2C_TransmitData8 + * @param I2Cx I2C Instance. + * @param Data Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2C_TransmitData8(I2C_TypeDef *I2Cx, uint8_t Data) +{ + WRITE_REG(I2Cx->TXDR, Data); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, const LL_I2C_InitTypeDef *I2C_InitStruct); +ErrorStatus LL_I2C_DeInit(const I2C_TypeDef *I2Cx); +void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I2C1 || I2C2 || I2C3 || I2C4 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_I2C_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_lpuart.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_lpuart.h new file mode 100644 index 0000000..2e8cd5d --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_lpuart.h @@ -0,0 +1,2892 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_lpuart.h + * @author MCD Application Team + * @brief Header file of LPUART LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_LPUART_H +#define STM32L4xx_LL_LPUART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +#if defined (LPUART1) + +/** @defgroup LPUART_LL LPUART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +#if defined(USART_PRESC_PRESCALER) +/** @defgroup LPUART_LL_Private_Variables LPUART Private Variables + * @{ + */ +/* Array used to get the LPUART prescaler division decimal values versus @ref LPUART_LL_EC_PRESCALER values */ +static const uint16_t LPUART_PRESCALER_TAB[] = +{ + (uint16_t)1, + (uint16_t)2, + (uint16_t)4, + (uint16_t)6, + (uint16_t)8, + (uint16_t)10, + (uint16_t)12, + (uint16_t)16, + (uint16_t)32, + (uint16_t)64, + (uint16_t)128, + (uint16_t)256 +}; +/** + * @} + */ +#endif /* USART_PRESC_PRESCALER */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup LPUART_LL_Private_Constants LPUART Private Constants + * @{ + */ +/* Defines used in Baud Rate related macros and corresponding register setting computation */ +#define LPUART_LPUARTDIV_FREQ_MUL 256U +#define LPUART_BRR_MASK 0x000FFFFFU +#define LPUART_BRR_MIN_VALUE 0x00000300U +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_Private_Macros LPUART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_ES_INIT LPUART Exported Init structures + * @{ + */ + +/** + * @brief LL LPUART Init Structure definition + */ +typedef struct +{ +#if defined(USART_PRESC_PRESCALER) + uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. + This parameter can be a value of @ref LPUART_LL_EC_PRESCALER. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetPrescaler().*/ + +#endif /* USART_PRESC_PRESCALER */ + uint32_t BaudRate; /*!< This field defines expected LPUART communication baud rate. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref LPUART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref LPUART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref LPUART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref LPUART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref LPUART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetHWFlowCtrl().*/ + +} LL_LPUART_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Constants LPUART Exported Constants + * @{ + */ + +/** @defgroup LPUART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_LPUART_WriteReg function + * @{ + */ +#define LL_LPUART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */ +#define LL_LPUART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */ +#define LL_LPUART_ICR_NCF USART_ICR_NECF /*!< Noise error detected clear flag */ +#define LL_LPUART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */ +#define LL_LPUART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */ +#define LL_LPUART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */ +#define LL_LPUART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */ +#define LL_LPUART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */ +#define LL_LPUART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_LPUART_ReadReg function + * @{ + */ +#define LL_LPUART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_LPUART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_LPUART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_LPUART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_LPUART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */ +#else +#define LL_LPUART_ISR_RXNE USART_ISR_RXNE /*!< Read data register not empty flag */ +#endif /* USART_CR1_FIFOEN */ +#define LL_LPUART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/ +#else +#define LL_LPUART_ISR_TXE USART_ISR_TXE /*!< Transmit data register empty flag */ +#endif /* USART_CR1_FIFOEN */ +#define LL_LPUART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_LPUART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_LPUART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_LPUART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_LPUART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_LPUART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#define LL_LPUART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#define LL_LPUART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_LPUART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */ +#define LL_LPUART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */ +#define LL_LPUART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */ +#define LL_LPUART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */ +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_LPUART_ReadReg and LL_LPUART_WriteReg functions + * @{ + */ +#define LL_LPUART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty + interrupt enable */ +#else +#define LL_LPUART_CR1_RXNEIE USART_CR1_RXNEIE /*!< Read data register not empty interrupt enable */ +#endif /* USART_CR1_FIFOEN */ +#define LL_LPUART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO + not full interrupt enable */ +#else +#define LL_LPUART_CR1_TXEIE USART_CR1_TXEIE /*!< Transmit data register empty interrupt enable */ +#endif /* USART_CR1_FIFOEN */ +#define LL_LPUART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_LPUART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */ +#define LL_LPUART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */ +#endif /* USART_CR1_FIFOEN */ +#define LL_LPUART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_LPUART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#define LL_LPUART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */ +#define LL_LPUART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */ +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ +#if defined(USART_CR1_FIFOEN) + +/** @defgroup LPUART_LL_EC_FIFOTHRESHOLD FIFO Threshold + * @{ + */ +#define LL_LPUART_FIFOTHRESHOLD_1_8 0x00000000U /*!< FIFO reaches 1/8 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_1_4 0x00000001U /*!< FIFO reaches 1/4 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_1_2 0x00000002U /*!< FIFO reaches 1/2 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_3_4 0x00000003U /*!< FIFO reaches 3/4 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_7_8 0x00000004U /*!< FIFO reaches 7/8 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_8_8 0x00000005U /*!< FIFO becomes empty for TX and full for RX */ +/** + * @} + */ +#endif /* USART_CR1_FIFOEN */ + +/** @defgroup LPUART_LL_EC_DIRECTION Direction + * @{ + */ +#define LL_LPUART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_LPUART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_LPUART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_LPUART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_LPUART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_LPUART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_LPUART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_LPUART_WAKEUP_IDLELINE 0x00000000U /*!< LPUART wake up from Mute mode on Idle Line */ +#define LL_LPUART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< LPUART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_LPUART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_LPUART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_LPUART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ +#if defined(USART_PRESC_PRESCALER) + +/** @defgroup LPUART_LL_EC_PRESCALER Clock Source Prescaler + * @{ + */ +#define LL_LPUART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_LPUART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_LPUART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_LPUART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_LPUART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_LPUART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_LPUART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_LPUART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_LPUART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_LPUART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_LPUART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_LPUART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ +/** + * @} + */ +#endif /* USART_PRESC_PRESCALER */ + +/** @defgroup LPUART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_LPUART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_LPUART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_LPUART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_LPUART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_LPUART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_LPUART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_LPUART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_LPUART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_LPUART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received + in positive/direct logic. (1=H, 0=L) */ +#define LL_LPUART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received + in negative/inverse logic. (1=L, 0=H). + The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_LPUART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, + following the start bit */ +#define LL_LPUART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, + following the start bit */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_LPUART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_LPUART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_LPUART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_LPUART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested + when there is space in the receive buffer */ +#define LL_LPUART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted + when the nCTS input is asserted (tied to 0)*/ +#define LL_LPUART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_LPUART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_LPUART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_LPUART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_LPUART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_LPUART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_LPUART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_LPUART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Macros LPUART Exported Macros + * @{ + */ + +/** @defgroup LPUART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in LPUART register + * @param __INSTANCE__ LPUART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_LPUART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in LPUART register + * @param __INSTANCE__ LPUART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_LPUART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup LPUART_LL_EM_Exported_Macros_Helper Helper Macros + * @{ + */ + +/** + * @brief Compute LPUARTDIV value according to Peripheral Clock and + * expected Baud Rate (20-bit value of LPUARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for LPUART Instance + @if USART_PRESC_PRESCALER + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + @endif + * @param __BAUDRATE__ Baud Rate value to achieve + * @retval LPUARTDIV value to be used for BRR register filling + */ +#if defined(USART_PRESC_PRESCALER) +#define __LL_LPUART_DIV(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (uint32_t)\ + ((((((uint64_t)(__PERIPHCLK__)/(uint64_t)(LPUART_PRESCALER_TAB[(uint16_t)(__PRESCALER__)]))\ + * LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) & LPUART_BRR_MASK) +#else +#define __LL_LPUART_DIV(__PERIPHCLK__, __BAUDRATE__) (uint32_t)\ + (((((uint64_t)(__PERIPHCLK__)*LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) \ + & LPUART_BRR_MASK) +#endif /* USART_PRESC_PRESCALER */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Functions LPUART Exported Functions + * @{ + */ + +/** @defgroup LPUART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief LPUART Enable + * @rmtoll CR1 UE LL_LPUART_Enable + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_Enable(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_UE); +} + +/** + * @brief LPUART Disable + * @note When LPUART is disabled, LPUART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the LPUART is kept, but all the status + * flags, in the LPUARTx_ISR are set to their default values. + * @note In order to go into low-power mode without generating errors on the line, + * the TE bit must be reset before and the software must wait + * for the TC bit in the LPUART_ISR to be set before resetting the UE bit. + * The DMA requests are also reset when UE = 0 so the DMA channel must + * be disabled before resetting the UE bit. + * @rmtoll CR1 UE LL_LPUART_Disable + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_Disable(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if LPUART is enabled + * @rmtoll CR1 UE LL_LPUART_IsEnabled + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabled(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief FIFO Mode Enable + * @rmtoll CR1 FIFOEN LL_LPUART_EnableFIFO + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableFIFO(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief FIFO Mode Disable + * @rmtoll CR1 FIFOEN LL_LPUART_DisableFIFO + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableFIFO(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief Indicate if FIFO Mode is enabled + * @rmtoll CR1 FIFOEN LL_LPUART_IsEnabledFIFO + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledFIFO(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_FIFOEN) == (USART_CR1_FIFOEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure TX FIFO Threshold + * @rmtoll CR3 TXFTCFG LL_LPUART_SetTXFIFOThreshold + * @param LPUARTx LPUART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Return TX FIFO Threshold Configuration + * @rmtoll CR3 TXFTCFG LL_LPUART_GetTXFIFOThreshold + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXFIFOThreshold(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Configure RX FIFO Threshold + * @rmtoll CR3 RXFTCFG LL_LPUART_SetRXFIFOThreshold + * @param LPUARTx LPUART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetRXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Return RX FIFO Threshold Configuration + * @rmtoll CR3 RXFTCFG LL_LPUART_GetRXFIFOThreshold + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetRXFIFOThreshold(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Configure TX and RX FIFOs Threshold + * @rmtoll CR3 TXFTCFG LL_LPUART_ConfigFIFOsThreshold\n + * CR3 RXFTCFG LL_LPUART_ConfigFIFOsThreshold + * @param LPUARTx LPUART Instance + * @param TXThreshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @param RXThreshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigFIFOsThreshold(USART_TypeDef *LPUARTx, uint32_t TXThreshold, uint32_t RXThreshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | \ + (RXThreshold << USART_CR3_RXFTCFG_Pos)); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief LPUART enabled in STOP Mode + * @note When this function is enabled, LPUART is able to wake up the MCU from Stop mode, provided that + * LPUART clock selection is HSI or LSE in RCC. + * @rmtoll CR1 UESM LL_LPUART_EnableInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableInStopMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief LPUART disabled in STOP Mode + * @note When this function is disabled, LPUART is not able to wake up the MCU from Stop mode + * @rmtoll CR1 UESM LL_LPUART_DisableInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableInStopMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if LPUART is enabled in STOP Mode + * (able to wake up MCU from Stop mode or not) + * @rmtoll CR1 UESM LL_LPUART_IsEnabledInStopMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledInStopMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +#if defined(USART_CR3_UCESM) +/** + * @brief LPUART Clock enabled in STOP Mode + * @note When this function is called, LPUART Clock is enabled while in STOP mode + * @rmtoll CR3 UCESM LL_LPUART_EnableClockInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableClockInStopMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_UCESM); +} + +/** + * @brief LPUART clock disabled in STOP Mode + * @note When this function is called, LPUART Clock is disabled while in STOP mode + * @rmtoll CR3 UCESM LL_LPUART_DisableClockInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableClockInStopMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_UCESM); +} + +/** + * @brief Indicate if LPUART clock is enabled in STOP Mode + * @rmtoll CR3 UCESM LL_LPUART_IsClockEnabledInStopMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsClockEnabledInStopMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_UCESM) == (USART_CR3_UCESM)) ? 1UL : 0UL); +} + +#endif /* USART_CR3_UCESM */ +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_LPUART_EnableDirectionRx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDirectionRx(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_LPUART_DisableDirectionRx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDirectionRx(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_LPUART_EnableDirectionTx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDirectionTx(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_LPUART_DisableDirectionTx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDirectionTx(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_LPUART_SetTransferDirection\n + * CR1 TE LL_LPUART_SetTransferDirection + * @param LPUARTx LPUART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_LPUART_DIRECTION_NONE + * @arg @ref LL_LPUART_DIRECTION_RX + * @arg @ref LL_LPUART_DIRECTION_TX + * @arg @ref LL_LPUART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTransferDirection(USART_TypeDef *LPUARTx, uint32_t TransferDirection) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_LPUART_GetTransferDirection\n + * CR1 TE LL_LPUART_GetTransferDirection + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DIRECTION_NONE + * @arg @ref LL_LPUART_DIRECTION_RX + * @arg @ref LL_LPUART_DIRECTION_TX + * @arg @ref LL_LPUART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTransferDirection(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled) + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_LPUART_SetParity\n + * CR1 PCE LL_LPUART_SetParity + * @param LPUARTx LPUART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetParity(USART_TypeDef *LPUARTx, uint32_t Parity) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_LPUART_GetParity\n + * CR1 PCE LL_LPUART_GetParity + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_LPUART_GetParity(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_LPUART_SetWakeUpMethod + * @param LPUARTx LPUART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_IDLELINE + * @arg @ref LL_LPUART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetWakeUpMethod(USART_TypeDef *LPUARTx, uint32_t Method) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_LPUART_GetWakeUpMethod + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_IDLELINE + * @arg @ref LL_LPUART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_LPUART_GetWakeUpMethod(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_LPUART_SetDataWidth + * @param LPUARTx LPUART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDataWidth(USART_TypeDef *LPUARTx, uint32_t DataWidth) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_LPUART_GetDataWidth + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDataWidth(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_LPUART_EnableMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableMuteMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_LPUART_DisableMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableMuteMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_LPUART_IsEnabledMuteMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledMuteMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +#if defined(USART_PRESC_PRESCALER) +/** + * @brief Configure Clock source prescaler for baudrate generator and oversampling + * @rmtoll PRESC PRESCALER LL_LPUART_SetPrescaler + * @param LPUARTx LPUART Instance + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetPrescaler(USART_TypeDef *LPUARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(LPUARTx->PRESC, USART_PRESC_PRESCALER, (uint16_t)PrescalerValue); +} + +/** + * @brief Retrieve the Clock source prescaler for baudrate generator and oversampling + * @rmtoll PRESC PRESCALER LL_LPUART_GetPrescaler + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetPrescaler(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->PRESC, USART_PRESC_PRESCALER)); +} +#endif /* USART_PRESC_PRESCALER */ + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_LPUART_SetStopBitsLength + * @param LPUARTx LPUART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetStopBitsLength(USART_TypeDef *LPUARTx, uint32_t StopBits) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_LPUART_GetStopBitsLength + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetStopBitsLength(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_LPUART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_LPUART_SetParity() function + * - Stop bits configuration using @ref LL_LPUART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_LPUART_ConfigCharacter\n + * CR1 PCE LL_LPUART_ConfigCharacter\n + * CR1 M LL_LPUART_ConfigCharacter\n + * CR2 STOP LL_LPUART_ConfigCharacter + * @param LPUARTx LPUART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigCharacter(USART_TypeDef *LPUARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(LPUARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_LPUART_SetTXRXSwap + * @param LPUARTx LPUART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_LPUART_TXRX_STANDARD + * @arg @ref LL_LPUART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXRXSwap(USART_TypeDef *LPUARTx, uint32_t SwapConfig) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_LPUART_GetTXRXSwap + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_TXRX_STANDARD + * @arg @ref LL_LPUART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXRXSwap(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_LPUART_SetRXPinLevel + * @param LPUARTx LPUART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_LPUART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetRXPinLevel(USART_TypeDef *LPUARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_LPUART_GetRXPinLevel + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetRXPinLevel(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_LPUART_SetTXPinLevel + * @param LPUARTx LPUART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_LPUART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXPinLevel(USART_TypeDef *LPUARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_LPUART_GetTXPinLevel + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXPinLevel(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_LPUART_SetBinaryDataLogic + * @param LPUARTx LPUART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_LPUART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_LPUART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetBinaryDataLogic(USART_TypeDef *LPUARTx, uint32_t DataLogic) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_LPUART_GetBinaryDataLogic + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_LPUART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_LPUART_GetBinaryDataLogic(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_LPUART_SetTransferBitOrder + * @param LPUARTx LPUART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_LPUART_BITORDER_LSBFIRST + * @arg @ref LL_LPUART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTransferBitOrder(USART_TypeDef *LPUARTx, uint32_t BitOrder) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_LPUART_GetTransferBitOrder + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_BITORDER_LSBFIRST + * @arg @ref LL_LPUART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTransferBitOrder(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Set Address of the LPUART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_LPUART_ConfigNodeAddress\n + * CR2 ADDM7 LL_LPUART_ConfigNodeAddress + * @param LPUARTx LPUART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_LPUART_ADDRESS_DETECT_4B + * @arg @ref LL_LPUART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the LPUART node. + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigNodeAddress(USART_TypeDef *LPUARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the LPUART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_LPUART_GetNodeAddress + * @param LPUARTx LPUART Instance + * @retval Address of the LPUART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_LPUART_GetNodeAddress(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_LPUART_GetNodeAddressLen + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_ADDRESS_DETECT_4B + * @arg @ref LL_LPUART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_LPUART_GetNodeAddressLen(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @rmtoll CR3 RTSE LL_LPUART_EnableRTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableRTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @rmtoll CR3 RTSE LL_LPUART_DisableRTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableRTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @rmtoll CR3 CTSE LL_LPUART_EnableCTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableCTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @rmtoll CR3 CTSE LL_LPUART_DisableCTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableCTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @rmtoll CR3 RTSE LL_LPUART_SetHWFlowCtrl\n + * CR3 CTSE LL_LPUART_SetHWFlowCtrl + * @param LPUARTx LPUART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_LPUART_HWCONTROL_NONE + * @arg @ref LL_LPUART_HWCONTROL_RTS + * @arg @ref LL_LPUART_HWCONTROL_CTS + * @arg @ref LL_LPUART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetHWFlowCtrl(USART_TypeDef *LPUARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @rmtoll CR3 RTSE LL_LPUART_GetHWFlowCtrl\n + * CR3 CTSE LL_LPUART_GetHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_HWCONTROL_NONE + * @arg @ref LL_LPUART_HWCONTROL_RTS + * @arg @ref LL_LPUART_HWCONTROL_CTS + * @arg @ref LL_LPUART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_LPUART_GetHWFlowCtrl(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_LPUART_EnableOverrunDetect + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableOverrunDetect(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_LPUART_DisableOverrunDetect + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableOverrunDetect(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_LPUART_IsEnabledOverrunDetect + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledOverrunDetect(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @rmtoll CR3 WUS LL_LPUART_SetWKUPType + * @param LPUARTx LPUART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_ON_ADDRESS + * @arg @ref LL_LPUART_WAKEUP_ON_STARTBIT + * @arg @ref LL_LPUART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetWKUPType(USART_TypeDef *LPUARTx, uint32_t Type) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @rmtoll CR3 WUS LL_LPUART_GetWKUPType + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_ON_ADDRESS + * @arg @ref LL_LPUART_WAKEUP_ON_STARTBIT + * @arg @ref LL_LPUART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_LPUART_GetWKUPType(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_WUS)); +} + +/** + * @brief Configure LPUART BRR register for achieving expected Baud Rate value. + * + * @note Compute and set LPUARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock and expected Baud Rate values + * @note Peripheral clock and Baud Rate values provided as function parameters should be valid + * (Baud rate value != 0). + * @note Provided that LPUARTx_BRR must be > = 0x300 and LPUART_BRR is 20-bit, + * a care should be taken when generating high baud rates using high PeriphClk + * values. PeriphClk must be in the range [3 x BaudRate, 4096 x BaudRate]. + * @rmtoll BRR BRR LL_LPUART_SetBaudRate + * @param LPUARTx LPUART Instance + * @param PeriphClk Peripheral Clock + @if USART_PRESC_PRESCALER + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + @endif + * @param BaudRate Baud Rate + * @retval None + */ +#if defined(USART_PRESC_PRESCALER) +__STATIC_INLINE void LL_LPUART_SetBaudRate(USART_TypeDef *LPUARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t BaudRate) +#else +__STATIC_INLINE void LL_LPUART_SetBaudRate(USART_TypeDef *LPUARTx, uint32_t PeriphClk, uint32_t BaudRate) +#endif /* USART_PRESC_PRESCALER */ +{ +#if defined(USART_PRESC_PRESCALER) + if (BaudRate != 0U) + { + LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, PrescalerValue, BaudRate); + } +#else + if (BaudRate != 0U) + { + LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, BaudRate); + } +#endif /* USART_PRESC_PRESCALER */ +} + +/** + * @brief Return current Baud Rate value, according to LPUARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @rmtoll BRR BRR LL_LPUART_GetBaudRate + * @param LPUARTx LPUART Instance + * @param PeriphClk Peripheral Clock + @if USART_PRESC_PRESCALER + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + @endif + * @retval Baud Rate + */ +#if defined(USART_PRESC_PRESCALER) +__STATIC_INLINE uint32_t LL_LPUART_GetBaudRate(const USART_TypeDef *LPUARTx, uint32_t PeriphClk, + uint32_t PrescalerValue) +#else +__STATIC_INLINE uint32_t LL_LPUART_GetBaudRate(const USART_TypeDef *LPUARTx, uint32_t PeriphClk) +#endif /* USART_PRESC_PRESCALER */ +{ + uint32_t lpuartdiv; + uint32_t brrresult; +#if defined(USART_PRESC_PRESCALER) + uint32_t periphclkpresc = (uint32_t)(PeriphClk / (LPUART_PRESCALER_TAB[(uint16_t)PrescalerValue])); +#endif /* USART_PRESC_PRESCALER */ + + lpuartdiv = LPUARTx->BRR & LPUART_BRR_MASK; + + if (lpuartdiv >= LPUART_BRR_MIN_VALUE) + { +#if defined(USART_PRESC_PRESCALER) + brrresult = (uint32_t)(((uint64_t)(periphclkpresc) * LPUART_LPUARTDIV_FREQ_MUL) / lpuartdiv); +#else + brrresult = (uint32_t)(((uint64_t)(PeriphClk) * LPUART_LPUARTDIV_FREQ_MUL) / lpuartdiv); +#endif /* USART_PRESC_PRESCALER */ + } + else + { + brrresult = 0x0UL; + } + + return (brrresult); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @rmtoll CR3 HDSEL LL_LPUART_EnableHalfDuplex + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableHalfDuplex(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @rmtoll CR3 HDSEL LL_LPUART_DisableHalfDuplex + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableHalfDuplex(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @rmtoll CR3 HDSEL LL_LPUART_IsEnabledHalfDuplex + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledHalfDuplex(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @rmtoll CR1 DEDT LL_LPUART_SetDEDeassertionTime + * @param LPUARTx LPUART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDEDeassertionTime(USART_TypeDef *LPUARTx, uint32_t Time) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @rmtoll CR1 DEDT LL_LPUART_GetDEDeassertionTime + * @param LPUARTx LPUART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : c + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDEDeassertionTime(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @rmtoll CR1 DEAT LL_LPUART_SetDEAssertionTime + * @param LPUARTx LPUART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDEAssertionTime(USART_TypeDef *LPUARTx, uint32_t Time) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @rmtoll CR1 DEAT LL_LPUART_GetDEAssertionTime + * @param LPUARTx LPUART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Time Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDEAssertionTime(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @rmtoll CR3 DEM LL_LPUART_EnableDEMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDEMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @rmtoll CR3 DEM LL_LPUART_DisableDEMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDEMode(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @rmtoll CR3 DEM LL_LPUART_IsEnabledDEMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDEMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @rmtoll CR3 DEP LL_LPUART_SetDESignalPolarity + * @param LPUARTx LPUART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_LPUART_DE_POLARITY_HIGH + * @arg @ref LL_LPUART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDESignalPolarity(USART_TypeDef *LPUARTx, uint32_t Polarity) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @rmtoll CR3 DEP LL_LPUART_GetDESignalPolarity + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DE_POLARITY_HIGH + * @arg @ref LL_LPUART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDESignalPolarity(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the LPUART Parity Error Flag is set or not + * @rmtoll ISR PE LL_LPUART_IsActiveFlag_PE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_PE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Framing Error Flag is set or not + * @rmtoll ISR FE LL_LPUART_IsActiveFlag_FE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_FE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_LPUART_IsActiveFlag_NE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_NE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_LPUART_IsActiveFlag_ORE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_ORE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_LPUART_IsActiveFlag_IDLE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_IDLE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_IsActiveFlag_RXNE LL_LPUART_IsActiveFlag_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART Read Data Register or LPUART RX FIFO Not Empty Flag is set or not + * @rmtoll ISR RXNE_RXFNE LL_LPUART_IsActiveFlag_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXNE_RXFNE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXNE_RXFNE) == (USART_ISR_RXNE_RXFNE)) ? 1UL : 0UL); +} +#else +/** + * @brief Check if the LPUART Read Data Register Not Empty Flag is set or not + * @rmtoll ISR RXNE LL_LPUART_IsActiveFlag_RXNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXNE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXNE) == (USART_ISR_RXNE)) ? 1UL : 0UL); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Check if the LPUART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_LPUART_IsActiveFlag_TC + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TC(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_IsActiveFlag_TXE LL_LPUART_IsActiveFlag_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART Transmit Data Register Empty or LPUART TX FIFO Not Full Flag is set or not + * @rmtoll ISR TXE_TXFNF LL_LPUART_IsActiveFlag_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXE_TXFNF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXE_TXFNF) == (USART_ISR_TXE_TXFNF)) ? 1UL : 0UL); +} +#else +/** + * @brief Check if the LPUART Transmit Data Register Empty Flag is set or not + * @rmtoll ISR TXE LL_LPUART_IsActiveFlag_TXE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXE) == (USART_ISR_TXE)) ? 1UL : 0UL); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Check if the LPUART CTS interrupt Flag is set or not + * @rmtoll ISR CTSIF LL_LPUART_IsActiveFlag_nCTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_nCTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS Flag is set or not + * @rmtoll ISR CTS LL_LPUART_IsActiveFlag_CTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_CTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Busy Flag is set or not + * @rmtoll ISR BUSY LL_LPUART_IsActiveFlag_BUSY + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_BUSY(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Character Match Flag is set or not + * @rmtoll ISR CMF LL_LPUART_IsActiveFlag_CM + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_CM(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_LPUART_IsActiveFlag_SBK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_SBK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_LPUART_IsActiveFlag_RWU + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RWU(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Wake Up from stop mode Flag is set or not + * @rmtoll ISR WUF LL_LPUART_IsActiveFlag_WKUP + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_WKUP(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_LPUART_IsActiveFlag_TEACK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TEACK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_LPUART_IsActiveFlag_REACK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_REACK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Check if the LPUART TX FIFO Empty Flag is set or not + * @rmtoll ISR TXFE LL_LPUART_IsActiveFlag_TXFE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXFE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXFE) == (USART_ISR_TXFE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Full Flag is set or not + * @rmtoll ISR RXFF LL_LPUART_IsActiveFlag_RXFF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXFF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXFF) == (USART_ISR_RXFF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Threshold Flag is set or not + * @rmtoll ISR TXFT LL_LPUART_IsActiveFlag_TXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXFT) == (USART_ISR_TXFT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Threshold Flag is set or not + * @rmtoll ISR RXFT LL_LPUART_IsActiveFlag_RXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXFT) == (USART_ISR_RXFT)) ? 1UL : 0UL); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_LPUART_ClearFlag_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_PE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_LPUART_ClearFlag_FE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_FE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise detected Flag + * @rmtoll ICR NECF LL_LPUART_ClearFlag_NE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_NE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_NECF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_LPUART_ClearFlag_ORE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_ORE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_LPUART_ClearFlag_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_IDLE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_IDLECF); +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_LPUART_ClearFlag_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_TC(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_TCCF); +} + +/** + * @brief Clear CTS Interrupt Flag + * @rmtoll ICR CTSCF LL_LPUART_ClearFlag_nCTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_nCTS(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_LPUART_ClearFlag_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_CM(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_CMCF); +} + +/** + * @brief Clear Wake Up from stop mode Flag + * @rmtoll ICR WUCF LL_LPUART_ClearFlag_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_WKUP(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_WUCF); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_LPUART_EnableIT_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_IDLE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_IDLEIE); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_EnableIT_RXNE LL_LPUART_EnableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Enable RX Not Empty and RX FIFO Not Empty Interrupt + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_EnableIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} +#else + +/** + * @brief Enable RX Not Empty Interrupt + * @rmtoll CR1 RXNEIE LL_LPUART_EnableIT_RXNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXNE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXNEIE); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_LPUART_EnableIT_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TC(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TCIE); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_EnableIT_TXE LL_LPUART_EnableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Enable TX Empty and TX FIFO Not Full Interrupt + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_EnableIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} +#else + +/** + * @brief Enable TX Empty Interrupt + * @rmtoll CR1 TXEIE LL_LPUART_EnableIT_TXE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXEIE); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_LPUART_EnableIT_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_PE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_LPUART_EnableIT_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_CM(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_CMIE); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Enable TX FIFO Empty Interrupt + * @rmtoll CR1 TXFEIE LL_LPUART_EnableIT_TXFE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXFE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Enable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_LPUART_EnableIT_RXFF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXFF(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXFFIE); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register). + * - 0: Interrupt is inhibited + * - 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register. + * @rmtoll CR3 EIE LL_LPUART_EnableIT_ERROR + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_ERROR(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @rmtoll CR3 CTSIE LL_LPUART_EnableIT_CTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_CTS(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @rmtoll CR3 WUFIE LL_LPUART_EnableIT_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_WKUP(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_WUFIE); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Enable TX FIFO Threshold Interrupt + * @rmtoll CR3 TXFTIE LL_LPUART_EnableIT_TXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Enable RX FIFO Threshold Interrupt + * @rmtoll CR3 RXFTIE LL_LPUART_EnableIT_RXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_RXFTIE); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_LPUART_DisableIT_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_IDLE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_IDLEIE); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_DisableIT_RXNE LL_LPUART_DisableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Disable RX Not Empty and RX FIFO Not Empty Interrupt + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_DisableIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} +#else + +/** + * @brief Disable RX Not Empty Interrupt + * @rmtoll CR1 RXNEIE LL_LPUART_DisableIT_RXNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXNE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXNEIE); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_LPUART_DisableIT_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TC(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TCIE); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_DisableIT_TXE LL_LPUART_DisableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Disable TX Empty and TX FIFO Not Full Interrupt + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_DisableIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} +#else + +/** + * @brief Disable TX Empty Interrupt + * @rmtoll CR1 TXEIE LL_LPUART_DisableIT_TXE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXEIE); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_LPUART_DisableIT_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_PE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_LPUART_DisableIT_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_CM(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_CMIE); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Disable TX FIFO Empty Interrupt + * @rmtoll CR1 TXFEIE LL_LPUART_DisableIT_TXFE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXFE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Disable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_LPUART_DisableIT_RXFF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXFF(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXFFIE); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register). + * - 0: Interrupt is inhibited + * - 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register. + * @rmtoll CR3 EIE LL_LPUART_DisableIT_ERROR + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_ERROR(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @rmtoll CR3 CTSIE LL_LPUART_DisableIT_CTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_CTS(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @rmtoll CR3 WUFIE LL_LPUART_DisableIT_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_WKUP(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_WUFIE); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Disable TX FIFO Threshold Interrupt + * @rmtoll CR3 TXFTIE LL_LPUART_DisableIT_TXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Disable RX FIFO Threshold Interrupt + * @rmtoll CR3 RXFTIE LL_LPUART_DisableIT_RXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_RXFTIE); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Check if the LPUART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_LPUART_IsEnabledIT_IDLE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_IDLE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_IsEnabledIT_RXNE LL_LPUART_IsEnabledIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART RX Not Empty and LPUART RX FIFO Not Empty Interrupt is enabled or disabled. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_IsEnabledIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXNE_RXFNE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE) == (USART_CR1_RXNEIE_RXFNEIE)) ? 1UL : 0UL); +} +#else + +/** + * @brief Check if the LPUART RX Not Empty Interrupt is enabled or disabled. + * @rmtoll CR1 RXNEIE LL_LPUART_IsEnabledIT_RXNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXNE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_RXNEIE) == (USART_CR1_RXNEIE)) ? 1UL : 0UL); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Check if the LPUART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_LPUART_IsEnabledIT_TC + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TC(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_LPUART_IsEnabledIT_TXE LL_LPUART_IsEnabledIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART TX Empty and LPUART TX FIFO Not Full Interrupt is enabled or disabled + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_IsEnabledIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXE_TXFNF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE) == (USART_CR1_TXEIE_TXFNFIE)) ? 1UL : 0UL); +} +#else + +/** + * @brief Check if the LPUART TX Empty Interrupt is enabled or disabled. + * @rmtoll CR1 TXEIE LL_LPUART_IsEnabledIT_TXE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TXEIE) == (USART_CR1_TXEIE)) ? 1UL : 0UL); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Check if the LPUART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_LPUART_IsEnabledIT_PE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_PE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_LPUART_IsEnabledIT_CM + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_CM(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Check if the LPUART TX FIFO Empty Interrupt is enabled or disabled + * @rmtoll CR1 TXFEIE LL_LPUART_IsEnabledIT_TXFE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXFE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TXFEIE) == (USART_CR1_TXFEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Full Interrupt is enabled or disabled + * @rmtoll CR1 RXFFIE LL_LPUART_IsEnabledIT_RXFF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXFF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_RXFFIE) == (USART_CR1_RXFFIE)) ? 1UL : 0UL); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Check if the LPUART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_LPUART_IsEnabledIT_ERROR + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_ERROR(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS Interrupt is enabled or disabled. + * @rmtoll CR3 CTSIE LL_LPUART_IsEnabledIT_CTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_CTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @rmtoll CR3 WUFIE LL_LPUART_IsEnabledIT_WKUP + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_WKUP(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Check if LPUART TX FIFO Threshold Interrupt is enabled or disabled + * @rmtoll CR3 TXFTIE LL_LPUART_IsEnabledIT_TXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_TXFTIE) == (USART_CR3_TXFTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if LPUART RX FIFO Threshold Interrupt is enabled or disabled + * @rmtoll CR3 RXFTIE LL_LPUART_IsEnabledIT_RXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_RXFTIE) == (USART_CR3_RXFTIE)) ? 1UL : 0UL); +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_LPUART_EnableDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMAReq_RX(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_LPUART_DisableDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMAReq_RX(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_LPUART_IsEnabledDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMAReq_RX(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_LPUART_EnableDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMAReq_TX(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_LPUART_DisableDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMAReq_TX(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_LPUART_IsEnabledDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMAReq_TX(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_LPUART_EnableDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMADeactOnRxErr(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_LPUART_DisableDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMADeactOnRxErr(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_LPUART_IsEnabledDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMADeactOnRxErr(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the LPUART data register address used for DMA transfer + * @rmtoll RDR RDR LL_LPUART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_LPUART_DMA_GetRegAddr + * @param LPUARTx LPUART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_LPUART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_LPUART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_LPUART_DMA_GetRegAddr(const USART_TypeDef *LPUARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_LPUART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(LPUARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(LPUARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_LPUART_ReceiveData8 + * @param LPUARTx LPUART Instance + * @retval Time Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_LPUART_ReceiveData8(const USART_TypeDef *LPUARTx) +{ + return (uint8_t)(READ_BIT(LPUARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_LPUART_ReceiveData9 + * @param LPUARTx LPUART Instance + * @retval Time Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_LPUART_ReceiveData9(const USART_TypeDef *LPUARTx) +{ + return (uint16_t)(READ_BIT(LPUARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_LPUART_TransmitData8 + * @param LPUARTx LPUART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_LPUART_TransmitData8(USART_TypeDef *LPUARTx, uint8_t Value) +{ + LPUARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_LPUART_TransmitData9 + * @param LPUARTx LPUART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_LPUART_TransmitData9(USART_TypeDef *LPUARTx, uint16_t Value) +{ + LPUARTx->TDR = Value & 0x1FFUL; +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_LPUART_RequestBreakSending + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestBreakSending(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put LPUART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_LPUART_RequestEnterMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestEnterMuteMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + @if USART_CR1_FIFOEN + * @brief Request a Receive Data and FIFO flush + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + @else + * @brief Request a Receive Data flush + @endif + * @rmtoll RQR RXFRQ LL_LPUART_RequestRxDataFlush + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestRxDataFlush(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Request a Transmit data FIFO flush + * @note TXFRQ bit is set to flush the whole FIFO when FIFO mode is enabled. This + * also sets the flag TXFE (TXFIFO empty bit in the LPUART_ISR register). + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll RQR TXFRQ LL_LPUART_RequestTxDataFlush + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestTxDataFlush(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_TXFRQ); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_LPUART_DeInit(const USART_TypeDef *LPUARTx); +ErrorStatus LL_LPUART_Init(USART_TypeDef *LPUARTx, const LL_LPUART_InitTypeDef *LPUART_InitStruct); +void LL_LPUART_StructInit(LL_LPUART_InitTypeDef *LPUART_InitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPUART1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_LPUART_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_pwr.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_pwr.h new file mode 100644 index 0000000..4660f30 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_pwr.h @@ -0,0 +1,1675 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_pwr.h + * @author MCD Application Team + * @brief Header file of PWR LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_PWR_H +#define STM32L4xx_LL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +#if defined(PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +#define LL_PWR_SCR_CSBF PWR_SCR_CSBF +#define LL_PWR_SCR_CWUF PWR_SCR_CWUF +#define LL_PWR_SCR_CWUF5 PWR_SCR_CWUF5 +#define LL_PWR_SCR_CWUF4 PWR_SCR_CWUF4 +#define LL_PWR_SCR_CWUF3 PWR_SCR_CWUF3 +#define LL_PWR_SCR_CWUF2 PWR_SCR_CWUF2 +#define LL_PWR_SCR_CWUF1 PWR_SCR_CWUF1 +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_PWR_ReadReg function + * @{ + */ +#define LL_PWR_SR1_WUFI PWR_SR1_WUFI +#if defined(PWR_SR1_EXT_SMPS_RDY) +#define LL_PWR_SR1_EXT_SMPS_RDY PWR_SR1_EXT_SMPS_RDY +#endif /* PWR_SR1_EXT_SMPS_RDY */ +#define LL_PWR_SR1_SBF PWR_SR1_SBF +#define LL_PWR_SR1_WUF5 PWR_SR1_WUF5 +#define LL_PWR_SR1_WUF4 PWR_SR1_WUF4 +#define LL_PWR_SR1_WUF3 PWR_SR1_WUF3 +#define LL_PWR_SR1_WUF2 PWR_SR1_WUF2 +#define LL_PWR_SR1_WUF1 PWR_SR1_WUF1 +#if defined(PWR_SR2_PVMO4) +#define LL_PWR_SR2_PVMO4 PWR_SR2_PVMO4 +#endif /* PWR_SR2_PVMO4 */ +#if defined(PWR_SR2_PVMO3) +#define LL_PWR_SR2_PVMO3 PWR_SR2_PVMO3 +#endif /* PWR_SR2_PVMO3 */ +#if defined(PWR_SR2_PVMO2) +#define LL_PWR_SR2_PVMO2 PWR_SR2_PVMO2 +#endif /* PWR_SR2_PVMO2 */ +#if defined(PWR_SR2_PVMO1) +#define LL_PWR_SR2_PVMO1 PWR_SR2_PVMO1 +#endif /* PWR_SR2_PVMO1 */ +#define LL_PWR_SR2_PVDO PWR_SR2_PVDO +#define LL_PWR_SR2_VOSF PWR_SR2_VOSF +#define LL_PWR_SR2_REGLPF PWR_SR2_REGLPF +#define LL_PWR_SR2_REGLPS PWR_SR2_REGLPS +/** + * @} + */ + +/** @defgroup PWR_LL_EC_REGU_VOLTAGE REGU VOLTAGE + * @{ + */ +#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR1_VOS_0) +#define LL_PWR_REGU_VOLTAGE_SCALE2 (PWR_CR1_VOS_1) +/** + * @} + */ + +/** @defgroup PWR_LL_EC_MODE_PWR MODE PWR + * @{ + */ +#define LL_PWR_MODE_STOP0 (PWR_CR1_LPMS_STOP0) +#define LL_PWR_MODE_STOP1 (PWR_CR1_LPMS_STOP1) +#define LL_PWR_MODE_STOP2 (PWR_CR1_LPMS_STOP2) +#define LL_PWR_MODE_STANDBY (PWR_CR1_LPMS_STANDBY) +#define LL_PWR_MODE_SHUTDOWN (PWR_CR1_LPMS_SHUTDOWN) +/** + * @} + */ + +/** @defgroup PWR_LL_EC_PVM_VDDUSB_1 Peripheral voltage monitoring + * @{ + */ +#if defined(PWR_CR2_PVME1) +#define LL_PWR_PVM_VDDUSB_1_2V (PWR_CR2_PVME1) /* Monitoring VDDUSB vs. 1.2V */ +#endif +#if defined(PWR_CR2_PVME2) +#define LL_PWR_PVM_VDDIO2_0_9V (PWR_CR2_PVME2) /* Monitoring VDDIO2 vs. 0.9V */ +#endif +#if defined(PWR_CR2_PVME3) +#define LL_PWR_PVM_VDDA_1_62V (PWR_CR2_PVME3) /* Monitoring VDDA vs. 1.62V */ +#endif +#if defined(PWR_CR2_PVME4) +#define LL_PWR_PVM_VDDA_2_2V (PWR_CR2_PVME4) /* Monitoring VDDA vs. 2.2V */ +#endif +/** + * @} + */ + +/** @defgroup PWR_LL_EC_PVDLEVEL PVDLEVEL + * @{ + */ +#define LL_PWR_PVDLEVEL_0 (PWR_CR2_PLS_LEV0) /* VPVD0 around 2.0 V */ +#define LL_PWR_PVDLEVEL_1 (PWR_CR2_PLS_LEV1) /* VPVD1 around 2.2 V */ +#define LL_PWR_PVDLEVEL_2 (PWR_CR2_PLS_LEV2) /* VPVD2 around 2.4 V */ +#define LL_PWR_PVDLEVEL_3 (PWR_CR2_PLS_LEV3) /* VPVD3 around 2.5 V */ +#define LL_PWR_PVDLEVEL_4 (PWR_CR2_PLS_LEV4) /* VPVD4 around 2.6 V */ +#define LL_PWR_PVDLEVEL_5 (PWR_CR2_PLS_LEV5) /* VPVD5 around 2.8 V */ +#define LL_PWR_PVDLEVEL_6 (PWR_CR2_PLS_LEV6) /* VPVD6 around 2.9 V */ +#define LL_PWR_PVDLEVEL_7 (PWR_CR2_PLS_LEV7) /* External input analog voltage (Compare internally to VREFINT) */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_WAKEUP WAKEUP + * @{ + */ +#define LL_PWR_WAKEUP_PIN1 (PWR_CR3_EWUP1) +#define LL_PWR_WAKEUP_PIN2 (PWR_CR3_EWUP2) +#define LL_PWR_WAKEUP_PIN3 (PWR_CR3_EWUP3) +#define LL_PWR_WAKEUP_PIN4 (PWR_CR3_EWUP4) +#define LL_PWR_WAKEUP_PIN5 (PWR_CR3_EWUP5) +/** + * @} + */ + +/** @defgroup PWR_LL_EC_BATT_CHARG_RESISTOR BATT CHARG RESISTOR + * @{ + */ +#define LL_PWR_BATT_CHARG_RESISTOR_5K (0x00000000U) +#define LL_PWR_BATT_CHARGRESISTOR_1_5K (PWR_CR4_VBRS) +/** + * @} + */ + +/** @defgroup PWR_LL_EC_SRAM2_CONTENT_RETENTION SRAM2 CONTENT RETENTION + * @{ + */ +#define LL_PWR_NO_SRAM2_RETENTION (0x00000000U) +#if defined(PWR_CR3_RRS_1) +#define LL_PWR_FULL_SRAM2_RETENTION PWR_CR3_RRS_0 +#define LL_PWR_4KBYTES_SRAM2_RETENTION PWR_CR3_RRS_1 +#else +#define LL_PWR_FULL_SRAM2_RETENTION PWR_CR3_RRS +#endif /* PWR_CR3_RRS_1 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GPIO GPIO + * @{ + */ +#define LL_PWR_GPIO_A ((uint32_t)(&(PWR->PUCRA))) +#define LL_PWR_GPIO_B ((uint32_t)(&(PWR->PUCRB))) +#define LL_PWR_GPIO_C ((uint32_t)(&(PWR->PUCRC))) +#define LL_PWR_GPIO_D ((uint32_t)(&(PWR->PUCRD))) +#define LL_PWR_GPIO_E ((uint32_t)(&(PWR->PUCRE))) +#if defined(GPIOF) +#define LL_PWR_GPIO_F ((uint32_t)(&(PWR->PUCRF))) +#endif +#if defined(GPIOG) +#define LL_PWR_GPIO_G ((uint32_t)(&(PWR->PUCRG))) +#endif +#if defined(GPIOH) +#define LL_PWR_GPIO_H ((uint32_t)(&(PWR->PUCRH))) +#endif +#if defined(GPIOI) +#define LL_PWR_GPIO_I ((uint32_t)(&(PWR->PUCRI))) +#endif +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GPIO_BIT GPIO BIT + * @{ + */ +#define LL_PWR_GPIO_BIT_0 (0x00000001U) +#define LL_PWR_GPIO_BIT_1 (0x00000002U) +#define LL_PWR_GPIO_BIT_2 (0x00000004U) +#define LL_PWR_GPIO_BIT_3 (0x00000008U) +#define LL_PWR_GPIO_BIT_4 (0x00000010U) +#define LL_PWR_GPIO_BIT_5 (0x00000020U) +#define LL_PWR_GPIO_BIT_6 (0x00000040U) +#define LL_PWR_GPIO_BIT_7 (0x00000080U) +#define LL_PWR_GPIO_BIT_8 (0x00000100U) +#define LL_PWR_GPIO_BIT_9 (0x00000200U) +#define LL_PWR_GPIO_BIT_10 (0x00000400U) +#define LL_PWR_GPIO_BIT_11 (0x00000800U) +#define LL_PWR_GPIO_BIT_12 (0x00001000U) +#define LL_PWR_GPIO_BIT_13 (0x00002000U) +#define LL_PWR_GPIO_BIT_14 (0x00004000U) +#define LL_PWR_GPIO_BIT_15 (0x00008000U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @defgroup PWR_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in PWR register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) + +/** + * @brief Read a value in PWR register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Switch the regulator from main mode to low-power mode + * @rmtoll CR1 LPR LL_PWR_EnableLowPowerRunMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableLowPowerRunMode(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_LPR); +} + +/** + * @brief Switch the regulator from low-power mode to main mode + * @rmtoll CR1 LPR LL_PWR_DisableLowPowerRunMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableLowPowerRunMode(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_LPR); +} + +/** + * @brief Switch from run main mode to run low-power mode. + * @rmtoll CR1 LPR LL_PWR_EnterLowPowerRunMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnterLowPowerRunMode(void) +{ + LL_PWR_EnableLowPowerRunMode(); +} + +/** + * @brief Switch from run main mode to low-power mode. + * @rmtoll CR1 LPR LL_PWR_ExitLowPowerRunMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_ExitLowPowerRunMode(void) +{ + LL_PWR_DisableLowPowerRunMode(); +} + +/** + * @brief Check if the regulator is in low-power mode + * @rmtoll CR1 LPR LL_PWR_IsEnabledLowPowerRunMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRunMode(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_LPR) == (PWR_CR1_LPR)) ? 1UL : 0UL); +} + +/** + * @brief Set the main internal regulator output voltage + * @note This configuration may be completed with LL_PWR_EnableRange1BoostMode() on STM32L4Rx/STM32L4Sx devices. + * @rmtoll CR1 VOS LL_PWR_SetRegulVoltageScaling + * @param VoltageScaling This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, VoltageScaling); +} + +/** + * @brief Get the main internal regulator output voltage + * @rmtoll CR1 VOS LL_PWR_GetRegulVoltageScaling + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_VOS)); +} + +#if defined(PWR_CR5_R1MODE) +/** + * @brief Enable main regulator voltage range 1 boost mode + * @rmtoll CR5 R1MODE LL_PWR_EnableRange1BoostMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableRange1BoostMode(void) +{ + CLEAR_BIT(PWR->CR5, PWR_CR5_R1MODE); +} + +/** + * @brief Disable main regulator voltage range 1 boost mode + * @rmtoll CR5 R1MODE LL_PWR_DisableRange1BoostMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableRange1BoostMode(void) +{ + SET_BIT(PWR->CR5, PWR_CR5_R1MODE); +} + +/** + * @brief Check if the main regulator voltage range 1 boost mode is enabled + * @rmtoll CR5 R1MODE LL_PWR_IsEnabledRange1BoostMode + * @retval Inverted state of bit (0 or 1). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledRange1BoostMode(void) +{ + return ((READ_BIT(PWR->CR5, PWR_CR5_R1MODE) == 0x0U) ? 1UL : 0UL); +} +#endif /* PWR_CR5_R1MODE */ + +/** + * @brief Enable access to the backup domain + * @rmtoll CR1 DBP LL_PWR_EnableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Disable access to the backup domain + * @rmtoll CR1 DBP LL_PWR_DisableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Check if the backup domain is enabled + * @rmtoll CR1 DBP LL_PWR_IsEnabledBkUpAccess + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_DBP) == (PWR_CR1_DBP)) ? 1UL : 0UL); +} + +/** + * @brief Set Low-Power mode + * @rmtoll CR1 LPMS LL_PWR_SetPowerMode + * @param LowPowerMode This parameter can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP0 + * @arg @ref LL_PWR_MODE_STOP1 + * @arg @ref LL_PWR_MODE_STOP2 + * @arg @ref LL_PWR_MODE_STANDBY + * @arg @ref LL_PWR_MODE_SHUTDOWN + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t LowPowerMode) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, LowPowerMode); +} + +/** + * @brief Get Low-Power mode + * @rmtoll CR1 LPMS LL_PWR_GetPowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_MODE_STOP0 + * @arg @ref LL_PWR_MODE_STOP1 + * @arg @ref LL_PWR_MODE_STOP2 + * @arg @ref LL_PWR_MODE_STANDBY + * @arg @ref LL_PWR_MODE_SHUTDOWN + */ +__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_LPMS)); +} + +#if defined(PWR_CR1_RRSTP) +/** + * @brief Enable SRAM3 content retention in Stop mode + * @rmtoll CR1 RRSTP LL_PWR_EnableSRAM3Retention + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableSRAM3Retention(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_RRSTP); +} + +/** + * @brief Disable SRAM3 content retention in Stop mode + * @rmtoll CR1 RRSTP LL_PWR_DisableSRAM3Retention + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableSRAM3Retention(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_RRSTP); +} + +/** + * @brief Check if SRAM3 content retention in Stop mode is enabled + * @rmtoll CR1 RRSTP LL_PWR_IsEnabledSRAM3Retention + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledSRAM3Retention(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_RRSTP) == (PWR_CR1_RRSTP)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_RRSTP */ + +#if defined(PWR_CR3_DSIPDEN) +/** + * @brief Enable pull-down activation on DSI pins + * @rmtoll CR3 DSIPDEN LL_PWR_EnableDSIPinsPDActivation + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableDSIPinsPDActivation(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_DSIPDEN); +} + +/** + * @brief Disable pull-down activation on DSI pins + * @rmtoll CR3 DSIPDEN LL_PWR_DisableDSIPinsPDActivation + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableDSIPinsPDActivation(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_DSIPDEN); +} + +/** + * @brief Check if pull-down activation on DSI pins is enabled + * @rmtoll CR3 DSIPDEN LL_PWR_IsEnabledDSIPinsPDActivation + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledDSIPinsPDActivation(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_DSIPDEN) == (PWR_CR3_DSIPDEN)) ? 1UL : 0UL); +} +#endif /* PWR_CR3_DSIPDEN */ + +#if defined(PWR_CR2_USV) +/** + * @brief Enable VDDUSB supply + * @rmtoll CR2 USV LL_PWR_EnableVddUSB + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableVddUSB(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_USV); +} + +/** + * @brief Disable VDDUSB supply + * @rmtoll CR2 USV LL_PWR_DisableVddUSB + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableVddUSB(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_USV); +} + +/** + * @brief Check if VDDUSB supply is enabled + * @rmtoll CR2 USV LL_PWR_IsEnabledVddUSB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledVddUSB(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_USV) == (PWR_CR2_USV)) ? 1UL : 0UL); +} +#endif + +#if defined(PWR_CR2_IOSV) +/** + * @brief Enable VDDIO2 supply + * @rmtoll CR2 IOSV LL_PWR_EnableVddIO2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableVddIO2(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_IOSV); +} + +/** + * @brief Disable VDDIO2 supply + * @rmtoll CR2 IOSV LL_PWR_DisableVddIO2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableVddIO2(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_IOSV); +} + +/** + * @brief Check if VDDIO2 supply is enabled + * @rmtoll CR2 IOSV LL_PWR_IsEnabledVddIO2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledVddIO2(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_IOSV) == (PWR_CR2_IOSV)) ? 1UL : 0UL); +} +#endif + +/** + * @brief Enable the Power Voltage Monitoring on a peripheral + * @rmtoll CR2 PVME1 LL_PWR_EnablePVM\n + * CR2 PVME2 LL_PWR_EnablePVM\n + * CR2 PVME3 LL_PWR_EnablePVM\n + * CR2 PVME4 LL_PWR_EnablePVM + * @param PeriphVoltage This parameter can be one of the following values: + * @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*) + * @arg @ref LL_PWR_PVM_VDDIO2_0_9V (*) + * @arg @ref LL_PWR_PVM_VDDA_1_62V + * @arg @ref LL_PWR_PVM_VDDA_2_2V + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVM(uint32_t PeriphVoltage) +{ + SET_BIT(PWR->CR2, PeriphVoltage); +} + +/** + * @brief Disable the Power Voltage Monitoring on a peripheral + * @rmtoll CR2 PVME1 LL_PWR_DisablePVM\n + * CR2 PVME2 LL_PWR_DisablePVM\n + * CR2 PVME3 LL_PWR_DisablePVM\n + * CR2 PVME4 LL_PWR_DisablePVM + * @param PeriphVoltage This parameter can be one of the following values: + * @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*) + * @arg @ref LL_PWR_PVM_VDDIO2_0_9V (*) + * @arg @ref LL_PWR_PVM_VDDA_1_62V + * @arg @ref LL_PWR_PVM_VDDA_2_2V + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVM(uint32_t PeriphVoltage) +{ + CLEAR_BIT(PWR->CR2, PeriphVoltage); +} + +/** + * @brief Check if Power Voltage Monitoring is enabled on a peripheral + * @rmtoll CR2 PVME1 LL_PWR_IsEnabledPVM\n + * CR2 PVME2 LL_PWR_IsEnabledPVM\n + * CR2 PVME3 LL_PWR_IsEnabledPVM\n + * CR2 PVME4 LL_PWR_IsEnabledPVM + * @param PeriphVoltage This parameter can be one of the following values: + * @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*) + * @arg @ref LL_PWR_PVM_VDDIO2_0_9V (*) + * @arg @ref LL_PWR_PVM_VDDA_1_62V + * @arg @ref LL_PWR_PVM_VDDA_2_2V + * + * (*) value not defined in all devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVM(uint32_t PeriphVoltage) +{ + return ((READ_BIT(PWR->CR2, PeriphVoltage) == (PeriphVoltage)) ? 1UL : 0UL); +} + +/** + * @brief Configure the voltage threshold detected by the Power Voltage Detector + * @rmtoll CR2 PLS LL_PWR_SetPVDLevel + * @param PVDLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel) +{ + MODIFY_REG(PWR->CR2, PWR_CR2_PLS, PVDLevel); +} + +/** + * @brief Get the voltage threshold detection + * @rmtoll CR2 PLS LL_PWR_GetPVDLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + */ +__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR2, PWR_CR2_PLS)); +} + +/** + * @brief Enable Power Voltage Detector + * @rmtoll CR2 PVDE LL_PWR_EnablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_PVDE); +} + +/** + * @brief Disable Power Voltage Detector + * @rmtoll CR2 PVDE LL_PWR_DisablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE); +} + +/** + * @brief Check if Power Voltage Detector is enabled + * @rmtoll CR2 PVDE LL_PWR_IsEnabledPVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_PVDE) == (PWR_CR2_PVDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Internal Wake-up line + * @rmtoll CR3 EIWF LL_PWR_EnableInternWU + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableInternWU(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_EIWF); +} + +/** + * @brief Disable Internal Wake-up line + * @rmtoll CR3 EIWF LL_PWR_DisableInternWU + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableInternWU(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_EIWF); +} + +/** + * @brief Check if Internal Wake-up line is enabled + * @rmtoll CR3 EIWF LL_PWR_IsEnabledInternWU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledInternWU(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_EIWF) == (PWR_CR3_EIWF)) ? 1UL : 0UL); +} + +/** + * @brief Enable pull-up and pull-down configuration + * @rmtoll CR3 APC LL_PWR_EnablePUPDCfg + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePUPDCfg(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_APC); +} + +/** + * @brief Disable pull-up and pull-down configuration + * @rmtoll CR3 APC LL_PWR_DisablePUPDCfg + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePUPDCfg(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_APC); +} + +/** + * @brief Check if pull-up and pull-down configuration is enabled + * @rmtoll CR3 APC LL_PWR_IsEnabledPUPDCfg + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPUPDCfg(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_APC) == (PWR_CR3_APC)) ? 1UL : 0UL); +} + +#if defined(PWR_CR3_DSIPDEN) +/** + * @brief Enable pull-down activation on DSI pins + * @rmtoll CR3 DSIPDEN LL_PWR_EnableDSIPullDown + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableDSIPullDown(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_DSIPDEN); +} + +/** + * @brief Disable pull-down activation on DSI pins + * @rmtoll CR3 DSIPDEN LL_PWR_DisableDSIPullDown + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableDSIPullDown(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_DSIPDEN); +} + +/** + * @brief Check if pull-down activation on DSI pins is enabled + * @rmtoll CR3 DSIPDEN LL_PWR_IsEnabledDSIPullDown + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledDSIPullDown(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_DSIPDEN) == (PWR_CR3_DSIPDEN)) ? 1UL : 0UL); +} +#endif /* PWR_CR3_DSIPDEN */ + +#if defined(PWR_CR3_ENULP) +/** + * @brief Enable Ultra Low Power BORL, BORH and PVD for STOP2 and Standby modes + * @rmtoll CR3 ENULP LL_PWR_EnableBORPVD_ULP + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBORPVD_ULP(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_ENULP); +} + +/** + * @brief Disable Ultra Low Power BORL, BORH and PVD for STOP2 and Standby modes + * @rmtoll CR3 ENULP LL_PWR_DisableBORPVD_ULP + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBORPVD_ULP(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_ENULP); +} + +/** + * @brief Check if Ultra Low Power BORL, BORH and PVD for STOP2 and Standby modes is enabled + * @rmtoll CR3 ENULP LL_PWR_IsEnabledBORPVD_ULP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBORPVD_ULP(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_ENULP) == (PWR_CR3_ENULP)) ? 1UL : 0UL); +} +#endif /* PWR_CR3_ENULP */ + +/** + * @brief Enable SRAM2 full content retention in Standby mode + * @rmtoll CR3 RRS LL_PWR_EnableSRAM2Retention + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableSRAM2Retention(void) +{ + MODIFY_REG(PWR->CR3, PWR_CR3_RRS, LL_PWR_FULL_SRAM2_RETENTION); +} + +/** + * @brief Disable SRAM2 content retention in Standby mode + * @rmtoll CR3 RRS LL_PWR_DisableSRAM2Retention + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableSRAM2Retention(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_RRS); +} + +/** + * @brief Check if SRAM2 full content retention in Standby mode is enabled + * @rmtoll CR3 RRS LL_PWR_IsEnabledSRAM2Retention + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledSRAM2Retention(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_RRS) == (LL_PWR_FULL_SRAM2_RETENTION)) ? 1UL : 0UL); +} + +/** + * @brief Set SRAM2 content retention in Standby mode + * @rmtoll CR3 RRS LL_PWR_SetSRAM2ContentRetention + * @param SRAM2Size This parameter can be one of the following values: + * @arg @ref LL_PWR_NO_SRAM2_RETENTION + * @arg @ref LL_PWR_FULL_SRAM2_RETENTION + * @arg @ref LL_PWR_4KBYTES_SRAM2_RETENTION + * @note LL_PWR_4KBYTES_SRAM2_RETENTION parameter is not available on all devices + * @note Setting LL_PWR_NO_SRAM2_RETENTION is same as calling LL_PWR_DisableSRAM2Retention() + * @note Setting LL_PWR_FULL_SRAM2_RETENTION is same as calling LL_PWR_EnableSRAM2Retention() + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetSRAM2ContentRetention(uint32_t SRAM2Size) +{ + MODIFY_REG(PWR->CR3, PWR_CR3_RRS, SRAM2Size); +} + +/** + * @brief Get SRAM2 content retention in Standby mode + * @rmtoll CR3 RRS LL_PWR_GetSRAM2ContentRetention + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_NO_SRAM2_RETENTION + * @arg @ref LL_PWR_FULL_SRAM2_RETENTION + * @arg @ref LL_PWR_4KBYTES_SRAM2_RETENTION + * @note LL_PWR_4KBYTES_SRAM2_RETENTION parameter is not available on all devices + */ +__STATIC_INLINE uint32_t LL_PWR_GetSRAM2ContentRetention(void) +{ + return (uint32_t)(READ_BIT(PWR->CR3, PWR_CR3_RRS)); +} + +/** + * @brief Enable the WakeUp PINx functionality + * @rmtoll CR3 EWUP1 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP2 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP3 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP4 LL_PWR_EnableWakeUpPin\n + * CR3 EWUP5 LL_PWR_EnableWakeUpPin\n + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) +{ + SET_BIT(PWR->CR3, WakeUpPin); +} + +/** + * @brief Disable the WakeUp PINx functionality + * @rmtoll CR3 EWUP1 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP2 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP3 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP4 LL_PWR_DisableWakeUpPin\n + * CR3 EWUP5 LL_PWR_DisableWakeUpPin\n + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->CR3, WakeUpPin); +} + +/** + * @brief Check if the WakeUp PINx functionality is enabled + * @rmtoll CR3 EWUP1 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP2 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP3 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP4 LL_PWR_IsEnabledWakeUpPin\n + * CR3 EWUP5 LL_PWR_IsEnabledWakeUpPin\n + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->CR3, WakeUpPin) == (WakeUpPin)) ? 1UL : 0UL); +} + +#if defined(PWR_CR4_EXT_SMPS_ON) +/** + * @brief Enable the CFLDO working @ 0.95V + * @note When external SMPS is used & CFLDO operating in Range 2, the regulated voltage of the + * internal CFLDO can be reduced to 0.95V. + * @rmtoll CR4 EXT_SMPS_ON LL_PWR_EnableExtSMPS_0V95 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableExtSMPS_0V95(void) +{ + SET_BIT(PWR->CR4, PWR_CR4_EXT_SMPS_ON); +} + +/** + * @brief Disable the CFLDO working @ 0.95V + * @note When external SMPS is used & CFLDO operating in Range 2, the regulated voltage of the + * internal CFLDO can be reduced to 0.95V. + * @rmtoll CR4 EXT_SMPS_ON LL_PWR_DisableExtSMPS_0V95 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableExtSMPS_0V95(void) +{ + CLEAR_BIT(PWR->CR4, PWR_CR4_EXT_SMPS_ON); +} + +/** + * @brief Check if CFLDO is working @ 0.95V + * @note When external SMPS is used & CFLDO operating in Range 2, the regulated voltage of the + * internal CFLDO can be reduced to 0.95V. + * @rmtoll CR4 EXT_SMPS_ON LL_PWR_IsEnabledExtSMPS_0V95 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledExtSMPS_0V95(void) +{ + return ((READ_BIT(PWR->CR4, PWR_CR4_EXT_SMPS_ON) == (PWR_CR4_EXT_SMPS_ON)) ? 1UL : 0UL); +} +#endif /* PWR_CR4_EXT_SMPS_ON */ + +/** + * @brief Set the resistor impedance + * @rmtoll CR4 VBRS LL_PWR_SetBattChargResistor + * @param Resistor This parameter can be one of the following values: + * @arg @ref LL_PWR_BATT_CHARG_RESISTOR_5K + * @arg @ref LL_PWR_BATT_CHARGRESISTOR_1_5K + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetBattChargResistor(uint32_t Resistor) +{ + MODIFY_REG(PWR->CR4, PWR_CR4_VBRS, Resistor); +} + +/** + * @brief Get the resistor impedance + * @rmtoll CR4 VBRS LL_PWR_GetBattChargResistor + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_BATT_CHARG_RESISTOR_5K + * @arg @ref LL_PWR_BATT_CHARGRESISTOR_1_5K + */ +__STATIC_INLINE uint32_t LL_PWR_GetBattChargResistor(void) +{ + return (uint32_t)(READ_BIT(PWR->CR4, PWR_CR4_VBRS)); +} + +/** + * @brief Enable battery charging + * @rmtoll CR4 VBE LL_PWR_EnableBatteryCharging + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBatteryCharging(void) +{ + SET_BIT(PWR->CR4, PWR_CR4_VBE); +} + +/** + * @brief Disable battery charging + * @rmtoll CR4 VBE LL_PWR_DisableBatteryCharging + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBatteryCharging(void) +{ + CLEAR_BIT(PWR->CR4, PWR_CR4_VBE); +} + +/** + * @brief Check if battery charging is enabled + * @rmtoll CR4 VBE LL_PWR_IsEnabledBatteryCharging + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBatteryCharging(void) +{ + return ((READ_BIT(PWR->CR4, PWR_CR4_VBE) == (PWR_CR4_VBE)) ? 1UL : 0UL); +} + +/** + * @brief Set the Wake-Up pin polarity low for the event detection + * @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP2 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP3 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP4 LL_PWR_SetWakeUpPinPolarityLow\n + * CR4 WP5 LL_PWR_SetWakeUpPinPolarityLow + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + SET_BIT(PWR->CR4, WakeUpPin); +} + +/** + * @brief Set the Wake-Up pin polarity high for the event detection + * @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP2 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP3 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP4 LL_PWR_SetWakeUpPinPolarityHigh\n + * CR4 WP5 LL_PWR_SetWakeUpPinPolarityHigh + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->CR4, WakeUpPin); +} + +/** + * @brief Get the Wake-Up pin polarity for the event detection + * @rmtoll CR4 WP1 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP2 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP3 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP4 LL_PWR_IsWakeUpPinPolarityLow\n + * CR4 WP5 LL_PWR_IsWakeUpPinPolarityLow + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->CR4, WakeUpPin) == (WakeUpPin)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO pull-up state in Standby and Shutdown modes + * @rmtoll PUCRA PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRB PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRC PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRD PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRE PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRF PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRG PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRH PU0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRI PU0-11 LL_PWR_EnableGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E + * @arg @ref LL_PWR_GPIO_F (*) + * @arg @ref LL_PWR_GPIO_G (*) + * @arg @ref LL_PWR_GPIO_H + * @arg @ref LL_PWR_GPIO_I (*) + * + * (*) value not defined in all devices + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + SET_BIT(*((__IO uint32_t *)GPIO), GPIONumber); +} + +/** + * @brief Disable GPIO pull-up state in Standby and Shutdown modes + * @rmtoll PUCRA PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRB PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRC PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRD PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRE PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRF PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRG PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRH PU0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRI PU0-11 LL_PWR_DisableGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E + * @arg @ref LL_PWR_GPIO_F (*) + * @arg @ref LL_PWR_GPIO_G (*) + * @arg @ref LL_PWR_GPIO_H + * @arg @ref LL_PWR_GPIO_I (*) + * + * (*) value not defined in all devices + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + CLEAR_BIT(*((__IO uint32_t *)GPIO), GPIONumber); +} + +/** + * @brief Check if GPIO pull-up state is enabled + * @rmtoll PUCRA PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRB PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRC PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRD PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRE PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRF PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRG PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRH PU0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRI PU0-11 LL_PWR_IsEnabledGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E + * @arg @ref LL_PWR_GPIO_F (*) + * @arg @ref LL_PWR_GPIO_G (*) + * @arg @ref LL_PWR_GPIO_H + * @arg @ref LL_PWR_GPIO_I (*) + * + * (*) value not defined in all devices + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + return ((READ_BIT(*((__IO uint32_t *)GPIO), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO pull-down state in Standby and Shutdown modes + * @rmtoll PDCRA PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRB PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRC PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRD PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRE PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRF PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRG PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRH PD0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRI PD0-11 LL_PWR_EnableGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E + * @arg @ref LL_PWR_GPIO_F (*) + * @arg @ref LL_PWR_GPIO_G (*) + * @arg @ref LL_PWR_GPIO_H + * @arg @ref LL_PWR_GPIO_I (*) + * + * (*) value not defined in all devices + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + SET_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber); +} + +/** + * @brief Disable GPIO pull-down state in Standby and Shutdown modes + * @rmtoll PDCRA PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRB PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRC PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRD PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRE PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRF PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRG PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRH PD0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRI PD0-11 LL_PWR_DisableGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E + * @arg @ref LL_PWR_GPIO_F (*) + * @arg @ref LL_PWR_GPIO_G (*) + * @arg @ref LL_PWR_GPIO_H + * @arg @ref LL_PWR_GPIO_I (*) + * + * (*) value not defined in all devices + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + CLEAR_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber); +} + +/** + * @brief Check if GPIO pull-down state is enabled + * @rmtoll PDCRA PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRB PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRC PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRD PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRE PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRF PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRG PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRH PD0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRI PD0-11 LL_PWR_IsEnabledGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @arg @ref LL_PWR_GPIO_C + * @arg @ref LL_PWR_GPIO_D + * @arg @ref LL_PWR_GPIO_E + * @arg @ref LL_PWR_GPIO_F (*) + * @arg @ref LL_PWR_GPIO_G (*) + * @arg @ref LL_PWR_GPIO_H + * @arg @ref LL_PWR_GPIO_I (*) + * + * (*) value not defined in all devices + * @param GPIONumber This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + return ((READ_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Internal Wake-up line Flag + * @rmtoll SR1 WUFI LL_PWR_IsActiveFlag_InternWU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_InternWU(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUFI) == (PWR_SR1_WUFI)) ? 1UL : 0UL); +} + +#if defined(PWR_SR1_EXT_SMPS_RDY) +/** + * @brief Get Ready Flag for switching to external SMPS + * @rmtoll SR1 EXT_SMPS_RDY LL_PWR_IsActiveFlag_ExtSMPSReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_ExtSMPSReady(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_EXT_SMPS_RDY) == (PWR_SR1_EXT_SMPS_RDY)) ? 1UL : 0UL); +} +#endif /* PWR_SR1_EXT_SMPS_RDY */ + +/** + * @brief Get Stand-By Flag + * @rmtoll SR1 SBF LL_PWR_IsActiveFlag_SB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_SBF) == (PWR_SR1_SBF)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 5 + * @rmtoll SR1 WUF5 LL_PWR_IsActiveFlag_WU5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU5(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF5) == (PWR_SR1_WUF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 4 + * @rmtoll SR1 WUF4 LL_PWR_IsActiveFlag_WU4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU4(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF4) == (PWR_SR1_WUF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 3 + * @rmtoll SR1 WUF3 LL_PWR_IsActiveFlag_WU3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU3(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF3) == (PWR_SR1_WUF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 2 + * @rmtoll SR1 WUF2 LL_PWR_IsActiveFlag_WU2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU2(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF2) == (PWR_SR1_WUF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 1 + * @rmtoll SR1 WUF1 LL_PWR_IsActiveFlag_WU1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU1(void) +{ + return ((READ_BIT(PWR->SR1, PWR_SR1_WUF1) == (PWR_SR1_WUF1)) ? 1UL : 0UL); +} + +/** + * @brief Clear Stand-By Flag + * @rmtoll SCR CSBF LL_PWR_ClearFlag_SB + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_SB(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CSBF); +} + +/** + * @brief Clear Wake-up Flags + * @rmtoll SCR CWUF LL_PWR_ClearFlag_WU + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF); +} + +/** + * @brief Clear Wake-up Flag 5 + * @rmtoll SCR CWUF5 LL_PWR_ClearFlag_WU5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU5(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF5); +} + +/** + * @brief Clear Wake-up Flag 4 + * @rmtoll SCR CWUF4 LL_PWR_ClearFlag_WU4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU4(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF4); +} + +/** + * @brief Clear Wake-up Flag 3 + * @rmtoll SCR CWUF3 LL_PWR_ClearFlag_WU3 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU3(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF3); +} + +/** + * @brief Clear Wake-up Flag 2 + * @rmtoll SCR CWUF2 LL_PWR_ClearFlag_WU2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU2(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF2); +} + +/** + * @brief Clear Wake-up Flag 1 + * @rmtoll SCR CWUF1 LL_PWR_ClearFlag_WU1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU1(void) +{ + WRITE_REG(PWR->SCR, PWR_SCR_CWUF1); +} + +/** + * @brief Indicate whether VDDA voltage is below or above PVM4 threshold + * @rmtoll SR2 PVMO4 LL_PWR_IsActiveFlag_PVMO4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO4(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_PVMO4) == (PWR_SR2_PVMO4)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether VDDA voltage is below or above PVM3 threshold + * @rmtoll SR2 PVMO3 LL_PWR_IsActiveFlag_PVMO3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO3(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_PVMO3) == (PWR_SR2_PVMO3)) ? 1UL : 0UL); +} + +#if defined(PWR_SR2_PVMO2) +/** + * @brief Indicate whether VDDIO2 voltage is below or above PVM2 threshold + * @rmtoll SR2 PVMO2 LL_PWR_IsActiveFlag_PVMO2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO2(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_PVMO2) == (PWR_SR2_PVMO2)) ? 1UL : 0UL); +} +#endif /* PWR_SR2_PVMO2 */ + +#if defined(PWR_SR2_PVMO1) +/** + * @brief Indicate whether VDDUSB voltage is below or above PVM1 threshold + * @rmtoll SR2 PVMO1 LL_PWR_IsActiveFlag_PVMO1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO1(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_PVMO1) == (PWR_SR2_PVMO1)) ? 1UL : 0UL); +} +#endif /* PWR_SR2_PVMO1 */ + +/** + * @brief Indicate whether VDD voltage is below or above the selected PVD threshold + * @rmtoll SR2 PVDO LL_PWR_IsActiveFlag_PVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_PVDO) == (PWR_SR2_PVDO)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the regulator is ready in the selected voltage range or if its output voltage is still changing to the required voltage level + * @rmtoll SR2 VOSF LL_PWR_IsActiveFlag_VOS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_VOSF) == (PWR_SR2_VOSF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the regulator is ready in main mode or is in low-power mode + * @note Take care, return value "0" means the regulator is ready. Return value "1" means the output voltage range is still changing. + * @rmtoll SR2 REGLPF LL_PWR_IsActiveFlag_REGLPF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPF(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_REGLPF) == (PWR_SR2_REGLPF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether or not the low-power regulator is ready + * @rmtoll SR2 REGLPS LL_PWR_IsActiveFlag_REGLPS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPS(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_REGLPS) == (PWR_SR2_REGLPS)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup PWR_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_PWR_DeInit(void); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup PWR_LL_EF_Legacy_Functions Legacy functions name + * @{ + */ +/* Old functions name kept for legacy purpose, to be replaced by the */ +/* current functions name. */ +#define LL_PWR_IsActiveFlag_VOSF LL_PWR_IsActiveFlag_VOS +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(PWR) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_PWR_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_rcc.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_rcc.h new file mode 100644 index 0000000..6bd72bd --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_rcc.h @@ -0,0 +1,6233 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_rcc.h + * @author MCD Application Team + * @brief Header file of RCC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_RCC_H +#define STM32L4xx_LL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Constants RCC Private Constants + * @{ + */ +/* Defines used to perform offsets*/ +/* Offset used to access to RCC_CCIPR and RCC_CCIPR2 registers */ +#define RCC_OFFSET_CCIPR 0U +#define RCC_OFFSET_CCIPR2 0x14U + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Private_Macros RCC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Exported_Types RCC Exported Types + * @{ + */ + +/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure + * @{ + */ + +/** + * @brief RCC Clocks Frequency Structure + */ +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ + uint32_t HCLK_Frequency; /*!< HCLK clock frequency */ + uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */ + uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency */ +} LL_RCC_ClocksTypeDef; + +/** + * @} + */ + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation + * @brief Defines used to adapt values of different oscillators + * @note These values could be modified in the user environment according to + * HW set-up. + * @{ + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 8000000U /*!< Value of the HSE oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE 16000000U /*!< Value of the HSI oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ +#endif /* LSI_VALUE */ +#if defined(RCC_HSI48_SUPPORT) + +#if !defined (HSI48_VALUE) +#define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */ +#endif /* HSI48_VALUE */ +#endif /* RCC_HSI48_SUPPORT */ + +#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) +#define EXTERNAL_SAI1_CLOCK_VALUE 48000U /*!< Value of the SAI1_EXTCLK external oscillator in Hz */ +#endif /* EXTERNAL_SAI1_CLOCK_VALUE */ + +#if !defined (EXTERNAL_SAI2_CLOCK_VALUE) +#define EXTERNAL_SAI2_CLOCK_VALUE 48000U /*!< Value of the SAI2_EXTCLK external oscillator in Hz */ +#endif /* EXTERNAL_SAI2_CLOCK_VALUE */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_RCC_WriteReg function + * @{ + */ +#define LL_RCC_CICR_LSIRDYC RCC_CICR_LSIRDYC /*!< LSI Ready Interrupt Clear */ +#define LL_RCC_CICR_LSERDYC RCC_CICR_LSERDYC /*!< LSE Ready Interrupt Clear */ +#define LL_RCC_CICR_MSIRDYC RCC_CICR_MSIRDYC /*!< MSI Ready Interrupt Clear */ +#define LL_RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC /*!< HSI Ready Interrupt Clear */ +#define LL_RCC_CICR_HSERDYC RCC_CICR_HSERDYC /*!< HSE Ready Interrupt Clear */ +#define LL_RCC_CICR_PLLRDYC RCC_CICR_PLLRDYC /*!< PLL Ready Interrupt Clear */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CICR_HSI48RDYC RCC_CICR_HSI48RDYC /*!< HSI48 Ready Interrupt Clear */ +#endif /* RCC_HSI48_SUPPORT */ +#if defined(RCC_PLLSAI1_SUPPORT) +#define LL_RCC_CICR_PLLSAI1RDYC RCC_CICR_PLLSAI1RDYC /*!< PLLSAI1 Ready Interrupt Clear */ +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(RCC_PLLSAI2_SUPPORT) +#define LL_RCC_CICR_PLLSAI2RDYC RCC_CICR_PLLSAI2RDYC /*!< PLLSAI2 Ready Interrupt Clear */ +#endif /* RCC_PLLSAI2_SUPPORT */ +#define LL_RCC_CICR_LSECSSC RCC_CICR_LSECSSC /*!< LSE Clock Security System Interrupt Clear */ +#define LL_RCC_CICR_CSSC RCC_CICR_CSSC /*!< Clock Security System Interrupt Clear */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RCC_ReadReg function + * @{ + */ +#define LL_RCC_CIFR_LSIRDYF RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define LL_RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define LL_RCC_CIFR_MSIRDYF RCC_CIFR_MSIRDYF /*!< MSI Ready Interrupt flag */ +#define LL_RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#define LL_RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define LL_RCC_CIFR_PLLRDYF RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CIFR_HSI48RDYF RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */ +#endif /* RCC_HSI48_SUPPORT */ +#if defined(RCC_PLLSAI1_SUPPORT) +#define LL_RCC_CIFR_PLLSAI1RDYF RCC_CIFR_PLLSAI1RDYF /*!< PLLSAI1 Ready Interrupt flag */ +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(RCC_PLLSAI2_SUPPORT) +#define LL_RCC_CIFR_PLLSAI2RDYF RCC_CIFR_PLLSAI2RDYF /*!< PLLSAI2 Ready Interrupt flag */ +#endif /* RCC_PLLSAI2_SUPPORT */ +#define LL_RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */ +#define LL_RCC_CIFR_CSSF RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */ +#define LL_RCC_CSR_FWRSTF RCC_CSR_FWRSTF /*!< Firewall reset flag */ +#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */ +#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */ +#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */ +#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */ +#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */ +#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */ +#define LL_RCC_CSR_BORRSTF RCC_CSR_BORRSTF /*!< BOR reset flag */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions + * @{ + */ +#define LL_RCC_CIER_LSIRDYIE RCC_CIER_LSIRDYIE /*!< LSI Ready Interrupt Enable */ +#define LL_RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE /*!< LSE Ready Interrupt Enable */ +#define LL_RCC_CIER_MSIRDYIE RCC_CIER_MSIRDYIE /*!< MSI Ready Interrupt Enable */ +#define LL_RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE /*!< HSI Ready Interrupt Enable */ +#define LL_RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE /*!< HSE Ready Interrupt Enable */ +#define LL_RCC_CIER_PLLRDYIE RCC_CIER_PLLRDYIE /*!< PLL Ready Interrupt Enable */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_CIER_HSI48RDYIE RCC_CIER_HSI48RDYIE /*!< HSI48 Ready Interrupt Enable */ +#endif /* RCC_HSI48_SUPPORT */ +#if defined(RCC_PLLSAI1_SUPPORT) +#define LL_RCC_CIER_PLLSAI1RDYIE RCC_CIER_PLLSAI1RDYIE /*!< PLLSAI1 Ready Interrupt Enable */ +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(RCC_PLLSAI2_SUPPORT) +#define LL_RCC_CIER_PLLSAI2RDYIE RCC_CIER_PLLSAI2RDYIE /*!< PLLSAI2 Ready Interrupt Enable */ +#endif /* RCC_PLLSAI2_SUPPORT */ +#define LL_RCC_CIER_LSECSSIE RCC_CIER_LSECSSIE /*!< LSE CSS Interrupt Enable */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability + * @{ + */ +#define LL_RCC_LSEDRIVE_LOW 0x00000000U /*!< Xtal mode lower driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium low driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium high driving capability */ +#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MSIRANGE MSI clock ranges + * @{ + */ +#define LL_RCC_MSIRANGE_0 RCC_CR_MSIRANGE_0 /*!< MSI = 100 KHz */ +#define LL_RCC_MSIRANGE_1 RCC_CR_MSIRANGE_1 /*!< MSI = 200 KHz */ +#define LL_RCC_MSIRANGE_2 RCC_CR_MSIRANGE_2 /*!< MSI = 400 KHz */ +#define LL_RCC_MSIRANGE_3 RCC_CR_MSIRANGE_3 /*!< MSI = 800 KHz */ +#define LL_RCC_MSIRANGE_4 RCC_CR_MSIRANGE_4 /*!< MSI = 1 MHz */ +#define LL_RCC_MSIRANGE_5 RCC_CR_MSIRANGE_5 /*!< MSI = 2 MHz */ +#define LL_RCC_MSIRANGE_6 RCC_CR_MSIRANGE_6 /*!< MSI = 4 MHz */ +#define LL_RCC_MSIRANGE_7 RCC_CR_MSIRANGE_7 /*!< MSI = 8 MHz */ +#define LL_RCC_MSIRANGE_8 RCC_CR_MSIRANGE_8 /*!< MSI = 16 MHz */ +#define LL_RCC_MSIRANGE_9 RCC_CR_MSIRANGE_9 /*!< MSI = 24 MHz */ +#define LL_RCC_MSIRANGE_10 RCC_CR_MSIRANGE_10 /*!< MSI = 32 MHz */ +#define LL_RCC_MSIRANGE_11 RCC_CR_MSIRANGE_11 /*!< MSI = 48 MHz */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MSISRANGE MSI range after Standby mode + * @{ + */ +#define LL_RCC_MSISRANGE_4 RCC_CSR_MSISRANGE_1 /*!< MSI = 1 MHz */ +#define LL_RCC_MSISRANGE_5 RCC_CSR_MSISRANGE_2 /*!< MSI = 2 MHz */ +#define LL_RCC_MSISRANGE_6 RCC_CSR_MSISRANGE_4 /*!< MSI = 4 MHz */ +#define LL_RCC_MSISRANGE_7 RCC_CSR_MSISRANGE_8 /*!< MSI = 8 MHz */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSCO_CLKSOURCE LSCO Selection + * @{ + */ +#define LL_RCC_LSCO_CLKSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock */ +#define LL_RCC_LSCO_CLKSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_MSI RCC_CFGR_SW_MSI /*!< MSI selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */ +#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_MSI RCC_CFGR_SWS_MSI /*!< MSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler + * @{ + */ +#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ +#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ +#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ +#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ +#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ +#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ +#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ +#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ +#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) + * @{ + */ +#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ +#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ +#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ +#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ +#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB2_DIV APB high-speed prescaler (APB2) + * @{ + */ +#define LL_RCC_APB2_DIV_1 RCC_CFGR_PPRE2_DIV1 /*!< HCLK not divided */ +#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_DIV2 /*!< HCLK divided by 2 */ +#define LL_RCC_APB2_DIV_4 RCC_CFGR_PPRE2_DIV4 /*!< HCLK divided by 4 */ +#define LL_RCC_APB2_DIV_8 RCC_CFGR_PPRE2_DIV8 /*!< HCLK divided by 8 */ +#define LL_RCC_APB2_DIV_16 RCC_CFGR_PPRE2_DIV16 /*!< HCLK divided by 16 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_STOP_WAKEUPCLOCK Wakeup from Stop and CSS backup clock selection + * @{ + */ +#define LL_RCC_STOP_WAKEUPCLOCK_MSI 0x00000000U /*!< MSI selection after wake-up from STOP */ +#define LL_RCC_STOP_WAKEUPCLOCK_HSI RCC_CFGR_STOPWUCK /*!< HSI selection after wake-up from STOP */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection + * @{ + */ +#define LL_RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO output disabled, no clock on MCO */ +#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_MSI RCC_CFGR_MCOSEL_1 /*!< MSI selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI16 selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< Main PLL selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */ +#define LL_RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_3 /*!< HSI48 selection as MCO1 source */ +#endif /* RCC_HSI48_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO1_DIV MCO1 prescaler + * @{ + */ +#define LL_RCC_MCO1_DIV_1 RCC_CFGR_MCOPRE_DIV1 /*!< MCO not divided */ +#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_DIV2 /*!< MCO divided by 2 */ +#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_DIV4 /*!< MCO divided by 4 */ +#define LL_RCC_MCO1_DIV_8 RCC_CFGR_MCOPRE_DIV8 /*!< MCO divided by 8 */ +#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_DIV16 /*!< MCO divided by 16 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency + * @{ + */ +#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ +#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RCC_LL_EC_USART1_CLKSOURCE Peripheral USART clock source selection + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE_PCLK2 (RCC_CCIPR_USART1SEL << 16U) /*!< PCLK2 clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_0) /*!< SYSCLK clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_HSI ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_1) /*!< HSI clock used as USART1 clock source */ +#define LL_RCC_USART1_CLKSOURCE_LSE ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL) /*!< LSE clock used as USART1 clock source */ +#define LL_RCC_USART2_CLKSOURCE_PCLK1 (RCC_CCIPR_USART2SEL << 16U) /*!< PCLK1 clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL_0) /*!< SYSCLK clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_HSI ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL_1) /*!< HSI clock used as USART2 clock source */ +#define LL_RCC_USART2_CLKSOURCE_LSE ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL) /*!< LSE clock used as USART2 clock source */ +#if defined(RCC_CCIPR_USART3SEL) +#define LL_RCC_USART3_CLKSOURCE_PCLK1 (RCC_CCIPR_USART3SEL << 16U) /*!< PCLK1 clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL_0) /*!< SYSCLK clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_HSI ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL_1) /*!< HSI clock used as USART3 clock source */ +#define LL_RCC_USART3_CLKSOURCE_LSE ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL) /*!< LSE clock used as USART3 clock source */ +#endif /* RCC_CCIPR_USART3SEL */ +/** + * @} + */ + +#if defined(RCC_CCIPR_UART4SEL) || defined(RCC_CCIPR_UART5SEL) +/** @defgroup RCC_LL_EC_UART4_CLKSOURCE Peripheral UART clock source selection + * @{ + */ +#if defined(RCC_CCIPR_UART4SEL) +#define LL_RCC_UART4_CLKSOURCE_PCLK1 (RCC_CCIPR_UART4SEL << 16U) /*!< PCLK1 clock used as UART4 clock source */ +#define LL_RCC_UART4_CLKSOURCE_SYSCLK ((RCC_CCIPR_UART4SEL << 16U) | RCC_CCIPR_UART4SEL_0) /*!< SYSCLK clock used as UART4 clock source */ +#define LL_RCC_UART4_CLKSOURCE_HSI ((RCC_CCIPR_UART4SEL << 16U) | RCC_CCIPR_UART4SEL_1) /*!< HSI clock used as UART4 clock source */ +#define LL_RCC_UART4_CLKSOURCE_LSE ((RCC_CCIPR_UART4SEL << 16U) | RCC_CCIPR_UART4SEL) /*!< LSE clock used as UART4 clock source */ +#endif /* RCC_CCIPR_UART4SEL */ +#if defined(RCC_CCIPR_UART5SEL) +#define LL_RCC_UART5_CLKSOURCE_PCLK1 (RCC_CCIPR_UART5SEL << 16U) /*!< PCLK1 clock used as UART5 clock source */ +#define LL_RCC_UART5_CLKSOURCE_SYSCLK ((RCC_CCIPR_UART5SEL << 16U) | RCC_CCIPR_UART5SEL_0) /*!< SYSCLK clock used as UART5 clock source */ +#define LL_RCC_UART5_CLKSOURCE_HSI ((RCC_CCIPR_UART5SEL << 16U) | RCC_CCIPR_UART5SEL_1) /*!< HSI clock used as UART5 clock source */ +#define LL_RCC_UART5_CLKSOURCE_LSE ((RCC_CCIPR_UART5SEL << 16U) | RCC_CCIPR_UART5SEL) /*!< LSE clock used as UART5 clock source */ +#endif /* RCC_CCIPR_UART5SEL */ +/** + * @} + */ +#endif /* RCC_CCIPR_UART4SEL || RCC_CCIPR_UART5SEL */ + +/** @defgroup RCC_LL_EC_LPUART1_CLKSOURCE Peripheral LPUART clock source selection + * @{ + */ +#define LL_RCC_LPUART1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as LPUART1 clock source */ +#define LL_RCC_LPUART1_CLKSOURCE_SYSCLK RCC_CCIPR_LPUART1SEL_0 /*!< SYSCLK clock used as LPUART1 clock source */ +#define LL_RCC_LPUART1_CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1 /*!< HSI clock used as LPUART1 clock source */ +#define LL_RCC_LPUART1_CLKSOURCE_LSE RCC_CCIPR_LPUART1SEL /*!< LSE clock used as LPUART1 clock source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2C1_CLKSOURCE Peripheral I2C clock source selection + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE_PCLK1 (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C1SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C1 clock source */ +#define LL_RCC_I2C1_CLKSOURCE_SYSCLK (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL_0 >> RCC_CCIPR_I2C1SEL_Pos)) /*!< SYSCLK clock used as I2C1 clock source */ +#define LL_RCC_I2C1_CLKSOURCE_HSI (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL_1 >> RCC_CCIPR_I2C1SEL_Pos)) /*!< HSI clock used as I2C1 clock source */ +#if defined(RCC_CCIPR_I2C2SEL) +#define LL_RCC_I2C2_CLKSOURCE_PCLK1 (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C2SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C2 clock source */ +#define LL_RCC_I2C2_CLKSOURCE_SYSCLK (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL_0 >> RCC_CCIPR_I2C2SEL_Pos)) /*!< SYSCLK clock used as I2C2 clock source */ +#define LL_RCC_I2C2_CLKSOURCE_HSI (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL_1 >> RCC_CCIPR_I2C2SEL_Pos)) /*!< HSI clock used as I2C2 clock source */ +#endif /* RCC_CCIPR_I2C2SEL */ +#define LL_RCC_I2C3_CLKSOURCE_PCLK1 (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C3SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C3 clock source */ +#define LL_RCC_I2C3_CLKSOURCE_SYSCLK (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL_0 >> RCC_CCIPR_I2C3SEL_Pos)) /*!< SYSCLK clock used as I2C3 clock source */ +#define LL_RCC_I2C3_CLKSOURCE_HSI (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL_1 >> RCC_CCIPR_I2C3SEL_Pos)) /*!< HSI clock used as I2C3 clock source */ +#if defined(RCC_CCIPR2_I2C4SEL) +#define LL_RCC_I2C4_CLKSOURCE_PCLK1 (((uint32_t)RCC_OFFSET_CCIPR2 << 24U) | ((uint32_t)RCC_CCIPR2_I2C4SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C4 clock source */ +#define LL_RCC_I2C4_CLKSOURCE_SYSCLK (((uint32_t)RCC_OFFSET_CCIPR2 << 24U) | ((uint32_t)RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL_0 >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< SYSCLK clock used as I2C4 clock source */ +#define LL_RCC_I2C4_CLKSOURCE_HSI (((uint32_t)RCC_OFFSET_CCIPR2 << 24U) | ((uint32_t)RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL_1 >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< HSI clock used as I2C4 clock source */ +#endif /* RCC_CCIPR2_I2C4SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LPTIM1_CLKSOURCE Peripheral LPTIM clock source selection + * @{ + */ +#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 RCC_CCIPR_LPTIM1SEL /*!< PCLK1 clock used as LPTIM1 clock source */ +#define LL_RCC_LPTIM1_CLKSOURCE_LSI (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_0 >> 16U)) /*!< LSI clock used as LPTIM1 clock source */ +#define LL_RCC_LPTIM1_CLKSOURCE_HSI (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_1 >> 16U)) /*!< HSI clock used as LPTIM1 clock source */ +#define LL_RCC_LPTIM1_CLKSOURCE_LSE (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL >> 16U)) /*!< LSE clock used as LPTIM1 clock source */ +#define LL_RCC_LPTIM2_CLKSOURCE_PCLK1 RCC_CCIPR_LPTIM2SEL /*!< PCLK1 clock used as LPTIM2 clock source */ +#define LL_RCC_LPTIM2_CLKSOURCE_LSI (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_0 >> 16U)) /*!< LSI clock used as LPTIM2 clock source */ +#define LL_RCC_LPTIM2_CLKSOURCE_HSI (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_1 >> 16U)) /*!< HSI clock used as LPTIM2 clock source */ +#define LL_RCC_LPTIM2_CLKSOURCE_LSE (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL >> 16U)) /*!< LSE clock used as LPTIM2 clock source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SAI1_CLKSOURCE Peripheral SAI clock source selection + * @{ + */ +#if defined(RCC_CCIPR2_SAI1SEL) +#define LL_RCC_SAI1_CLKSOURCE_PLLSAI1 (RCC_CCIPR2_SAI1SEL << 16U) /*!< PLLSAI1 (PLLSAI1CLK) clock used as SAI1 clock source */ +#define LL_RCC_SAI1_CLKSOURCE_PLLSAI2 ((RCC_CCIPR2_SAI1SEL << 16U) | RCC_CCIPR2_SAI1SEL_0) /*!< PLLSAI2 (PLLSAI2CLK) clock used as SAI1 clock source */ +#define LL_RCC_SAI1_CLKSOURCE_PLL ((RCC_CCIPR2_SAI1SEL << 16U) | RCC_CCIPR2_SAI1SEL_1) /*!< PLL (PLLSAI3CLK) clock used as SAI1 clock source */ +#define LL_RCC_SAI1_CLKSOURCE_PIN ((RCC_CCIPR2_SAI1SEL << 16U) | (RCC_CCIPR2_SAI1SEL_1 | RCC_CCIPR2_SAI1SEL_0)) /*!< External input clock used as SAI1 clock source */ +#define LL_RCC_SAI1_CLKSOURCE_HSI ((RCC_CCIPR2_SAI1SEL << 16U) | RCC_CCIPR2_SAI1SEL_2) /*!< HSI clock used as SAI1 clock source */ +#elif defined(RCC_CCIPR_SAI1SEL) +#define LL_RCC_SAI1_CLKSOURCE_PLLSAI1 RCC_CCIPR_SAI1SEL /*!< PLLSAI1 clock used as SAI1 clock source */ +#if defined(RCC_PLLSAI2_SUPPORT) +#define LL_RCC_SAI1_CLKSOURCE_PLLSAI2 (RCC_CCIPR_SAI1SEL | (RCC_CCIPR_SAI1SEL_0 >> 16U)) /*!< PLLSAI2 clock used as SAI1 clock source */ +#endif /* RCC_PLLSAI2_SUPPORT */ +#define LL_RCC_SAI1_CLKSOURCE_PLL (RCC_CCIPR_SAI1SEL | (RCC_CCIPR_SAI1SEL_1 >> 16U)) /*!< PLL clock used as SAI1 clock source */ +#define LL_RCC_SAI1_CLKSOURCE_PIN (RCC_CCIPR_SAI1SEL | (RCC_CCIPR_SAI1SEL >> 16U)) /*!< External input clock used as SAI1 clock source */ +#endif /* RCC_CCIPR2_SAI1SEL */ + +#if defined(RCC_CCIPR2_SAI2SEL) +#define LL_RCC_SAI2_CLKSOURCE_PLLSAI1 (RCC_CCIPR2_SAI2SEL << 16U) /*!< PLLSAI1 (PLLSAI1CLK) clock used as SAI2 clock source */ +#define LL_RCC_SAI2_CLKSOURCE_PLLSAI2 ((RCC_CCIPR2_SAI2SEL << 16U) | RCC_CCIPR2_SAI2SEL_0) /*!< PLLSAI2 (PLLSAI2CLK) clock used as SAI2 clock source */ +#define LL_RCC_SAI2_CLKSOURCE_PLL ((RCC_CCIPR2_SAI2SEL << 16U) | RCC_CCIPR2_SAI2SEL_1) /*!< PLL (PLLSAI3CLK) clock used as SAI2 clock source */ +#define LL_RCC_SAI2_CLKSOURCE_PIN ((RCC_CCIPR2_SAI2SEL << 16U) | (RCC_CCIPR2_SAI2SEL_1 | RCC_CCIPR2_SAI2SEL_0)) /*!< External input clock used as SAI2 clock source */ +#define LL_RCC_SAI2_CLKSOURCE_HSI ((RCC_CCIPR2_SAI2SEL << 16U) | RCC_CCIPR2_SAI2SEL_2) /*!< HSI clock used as SAI2 clock source */ +#elif defined(RCC_CCIPR_SAI2SEL) +#define LL_RCC_SAI2_CLKSOURCE_PLLSAI1 RCC_CCIPR_SAI2SEL /*!< PLLSAI1 clock used as SAI2 clock source */ +#if defined(RCC_PLLSAI2_SUPPORT) +#define LL_RCC_SAI2_CLKSOURCE_PLLSAI2 (RCC_CCIPR_SAI2SEL | (RCC_CCIPR_SAI2SEL_0 >> 16U)) /*!< PLLSAI2 clock used as SAI2 clock source */ +#endif /* RCC_PLLSAI2_SUPPORT */ +#define LL_RCC_SAI2_CLKSOURCE_PLL (RCC_CCIPR_SAI2SEL | (RCC_CCIPR_SAI2SEL_1 >> 16U)) /*!< PLL clock used as SAI2 clock source */ +#define LL_RCC_SAI2_CLKSOURCE_PIN (RCC_CCIPR_SAI2SEL | (RCC_CCIPR_SAI2SEL >> 16U)) /*!< External input clock used as SAI2 clock source */ +#endif /* RCC_CCIPR2_SAI2SEL */ +/** + * @} + */ + +#if defined(RCC_CCIPR2_SDMMCSEL) +/** @defgroup RCC_LL_EC_SDMMC1_KERNELCLKSOURCE Peripheral SDMMC kernel clock source selection + * @{ + */ +#define LL_RCC_SDMMC1_KERNELCLKSOURCE_48CLK 0x00000000U /*!< 48MHz clock from internal multiplexor used as SDMMC1 clock source */ +#define LL_RCC_SDMMC1_KERNELCLKSOURCE_PLLP RCC_CCIPR2_SDMMCSEL /*!< PLLSAI3CLK clock used as SDMMC1 clock source */ +/** + * @} + */ +#endif /* RCC_CCIPR2_SDMMCSEL */ + +#if defined(SDMMC1) +/** @defgroup RCC_LL_EC_SDMMC1_CLKSOURCE Peripheral SDMMC clock source selection + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_SDMMC1_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock used as SDMMC1 clock source */ +#else +#define LL_RCC_SDMMC1_CLKSOURCE_NONE 0x00000000U /*!< No clock used as SDMMC1 clock source */ +#endif +#if defined(RCC_PLLSAI1_SUPPORT) +#define LL_RCC_SDMMC1_CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 clock used as SDMMC1 clock source */ +#endif /* RCC_PLLSAI1_SUPPORT */ +#define LL_RCC_SDMMC1_CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL clock used as SDMMC1 clock source */ +#define LL_RCC_SDMMC1_CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI clock used as SDMMC1 clock source */ +/** + * @} + */ +#endif /* SDMMC1 */ + +/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_RNG_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock used as RNG clock source */ +#else +#define LL_RCC_RNG_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RNG clock source */ +#endif +#if defined(RCC_PLLSAI1_SUPPORT) +#define LL_RCC_RNG_CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 clock used as RNG clock source */ +#endif /* RCC_PLLSAI1_SUPPORT */ +#define LL_RCC_RNG_CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL clock used as RNG clock source */ +#define LL_RCC_RNG_CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI clock used as RNG clock source */ +/** + * @} + */ + +#if defined(USB_OTG_FS) || defined(USB) +/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection + * @{ + */ +#if defined(RCC_HSI48_SUPPORT) +#define LL_RCC_USB_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock used as USB clock source */ +#else +#define LL_RCC_USB_CLKSOURCE_NONE 0x00000000U /*!< No clock used as USB clock source */ +#endif +#if defined(RCC_PLLSAI1_SUPPORT) +#define LL_RCC_USB_CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 clock used as USB clock source */ +#endif /* RCC_PLLSAI1_SUPPORT */ +#define LL_RCC_USB_CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL clock used as USB clock source */ +#define LL_RCC_USB_CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI clock used as USB clock source */ +/** + * @} + */ + +#endif /* USB_OTG_FS || USB */ + +/** @defgroup RCC_LL_EC_ADC_CLKSOURCE Peripheral ADC clock source selection + * @{ + */ +#define LL_RCC_ADC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as ADC clock source */ +#if defined(RCC_PLLSAI1_SUPPORT) +#define LL_RCC_ADC_CLKSOURCE_PLLSAI1 RCC_CCIPR_ADCSEL_0 /*!< PLLSAI1 clock used as ADC clock source */ +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(RCC_PLLSAI2_SUPPORT) && !defined(LTDC) +#define LL_RCC_ADC_CLKSOURCE_PLLSAI2 RCC_CCIPR_ADCSEL_1 /*!< PLLSAI2 clock used as ADC clock source */ +#endif /* RCC_PLLSAI2_SUPPORT */ +#if defined(RCC_CCIPR_ADCSEL) +#define LL_RCC_ADC_CLKSOURCE_SYSCLK RCC_CCIPR_ADCSEL /*!< SYSCLK clock used as ADC clock source */ +#else +#define LL_RCC_ADC_CLKSOURCE_SYSCLK 0x30000000U /*!< SYSCLK clock used as ADC clock source */ +#endif +/** + * @} + */ + +#if defined(SWPMI1) +/** @defgroup RCC_LL_EC_SWPMI1_CLKSOURCE Peripheral SWPMI1 clock source selection + * @{ + */ +#define LL_RCC_SWPMI1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 used as SWPMI1 clock source */ +#define LL_RCC_SWPMI1_CLKSOURCE_HSI RCC_CCIPR_SWPMI1SEL /*!< HSI used as SWPMI1 clock source */ +/** + * @} + */ +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Channel0) +#if defined(RCC_CCIPR2_ADFSDM1SEL) +/** @defgroup RCC_LL_EC_DFSDM1_AUDIO_CLKSOURCE Peripheral DFSDM1 Audio clock source selection + * @{ + */ +#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1 0x00000000U /*!< SAI1 clock used as DFSDM1 Audio clock */ +#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_HSI RCC_CCIPR2_ADFSDM1SEL_0 /*!< HSI clock used as DFSDM1 Audio clock */ +#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_MSI RCC_CCIPR2_ADFSDM1SEL_1 /*!< MSI clock used as DFSDM1 Audio clock */ +/** + * @} + */ +#endif /* RCC_CCIPR2_ADFSDM1SEL */ + +/** @defgroup RCC_LL_EC_DFSDM1_CLKSOURCE Peripheral DFSDM1 clock source selection + * @{ + */ +#if defined(RCC_CCIPR2_DFSDM1SEL) +#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 used as DFSDM1 clock source */ +#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK RCC_CCIPR2_DFSDM1SEL /*!< SYSCLK used as DFSDM1 clock source */ +#else +#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 used as DFSDM1 clock source */ +#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK RCC_CCIPR_DFSDM1SEL /*!< SYSCLK used as DFSDM1 clock source */ +#endif /* RCC_CCIPR2_DFSDM1SEL */ +/** + * @} + */ +#endif /* DFSDM1_Channel0 */ + +#if defined(DSI) +/** @defgroup RCC_LL_EC_DSI_CLKSOURCE Peripheral DSI clock source selection + * @{ + */ +#define LL_RCC_DSI_CLKSOURCE_PHY 0x00000000U /*!< DSI-PHY clock used as DSI byte lane clock source */ +#define LL_RCC_DSI_CLKSOURCE_PLL RCC_CCIPR2_DSISEL /*!< PLL clock used as DSI byte lane clock source */ +/** + * @} + */ +#endif /* DSI */ + +#if defined(LTDC) +/** @defgroup RCC_LL_EC_LTDC_CLKSOURCE Peripheral LTDC clock source selection + * @{ + */ +#define LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV2 0x00000000U /*!< PLLSAI2DIVR divided by 2 used as LTDC clock source */ +#define LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV4 RCC_CCIPR2_PLLSAI2DIVR_0 /*!< PLLSAI2DIVR divided by 4 used as LTDC clock source */ +#define LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV8 RCC_CCIPR2_PLLSAI2DIVR_1 /*!< PLLSAI2DIVR divided by 8 used as LTDC clock source */ +#define LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV16 RCC_CCIPR2_PLLSAI2DIVR /*!< PLLSAI2DIVR divided by 16 used as LTDC clock source */ +/** + * @} + */ +#endif /* LTDC */ + +#if defined(OCTOSPI1) +/** @defgroup RCC_LL_EC_OCTOSPI Peripheral OCTOSPI get clock source + * @{ + */ +#define LL_RCC_OCTOSPI_CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK used as OctoSPI clock source */ +#define LL_RCC_OCTOSPI_CLKSOURCE_MSI RCC_CCIPR2_OSPISEL_0 /*!< MSI used as OctoSPI clock source */ +#define LL_RCC_OCTOSPI_CLKSOURCE_PLL RCC_CCIPR2_OSPISEL_1 /*!< PLL used as OctoSPI clock source */ +/** + * @} + */ +#endif /* OCTOSPI1 */ + +/** @defgroup RCC_LL_EC_USART1 Peripheral USART get clock source + * @{ + */ +#define LL_RCC_USART1_CLKSOURCE RCC_CCIPR_USART1SEL /*!< USART1 Clock source selection */ +#define LL_RCC_USART2_CLKSOURCE RCC_CCIPR_USART2SEL /*!< USART2 Clock source selection */ +#if defined(RCC_CCIPR_USART3SEL) +#define LL_RCC_USART3_CLKSOURCE RCC_CCIPR_USART3SEL /*!< USART3 Clock source selection */ +#endif /* RCC_CCIPR_USART3SEL */ +/** + * @} + */ + +#if defined(RCC_CCIPR_UART4SEL) || defined(RCC_CCIPR_UART5SEL) +/** @defgroup RCC_LL_EC_UART4 Peripheral UART get clock source + * @{ + */ +#if defined(RCC_CCIPR_UART4SEL) +#define LL_RCC_UART4_CLKSOURCE RCC_CCIPR_UART4SEL /*!< UART4 Clock source selection */ +#endif /* RCC_CCIPR_UART4SEL */ +#if defined(RCC_CCIPR_UART5SEL) +#define LL_RCC_UART5_CLKSOURCE RCC_CCIPR_UART5SEL /*!< UART5 Clock source selection */ +#endif /* RCC_CCIPR_UART5SEL */ +/** + * @} + */ +#endif /* RCC_CCIPR_UART4SEL || RCC_CCIPR_UART5SEL */ + +/** @defgroup RCC_LL_EC_LPUART1 Peripheral LPUART get clock source + * @{ + */ +#define LL_RCC_LPUART1_CLKSOURCE RCC_CCIPR_LPUART1SEL /*!< LPUART1 Clock source selection */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2C1 Peripheral I2C get clock source + * @{ + */ +#define LL_RCC_I2C1_CLKSOURCE (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL >> RCC_CCIPR_I2C1SEL_Pos)) /*!< I2C1 Clock source selection */ +#if defined(RCC_CCIPR_I2C2SEL) +#define LL_RCC_I2C2_CLKSOURCE (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL >> RCC_CCIPR_I2C2SEL_Pos)) /*!< I2C2 Clock source selection */ +#endif /* RCC_CCIPR_I2C2SEL */ +#define LL_RCC_I2C3_CLKSOURCE (((uint32_t)RCC_OFFSET_CCIPR << 24U) | ((uint32_t)RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL >> RCC_CCIPR_I2C3SEL_Pos)) /*!< I2C3 Clock source selection */ +#if defined(RCC_CCIPR2_I2C4SEL) +#define LL_RCC_I2C4_CLKSOURCE (((uint32_t)RCC_OFFSET_CCIPR2 << 24U) | ((uint32_t)RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< I2C4 Clock source selection */ +#endif /* RCC_CCIPR2_I2C4SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LPTIM1 Peripheral LPTIM get clock source + * @{ + */ +#define LL_RCC_LPTIM1_CLKSOURCE RCC_CCIPR_LPTIM1SEL /*!< LPTIM1 Clock source selection */ +#define LL_RCC_LPTIM2_CLKSOURCE RCC_CCIPR_LPTIM2SEL /*!< LPTIM2 Clock source selection */ +/** + * @} + */ + +#if defined(RCC_CCIPR_SAI1SEL) || defined(RCC_CCIPR2_SAI1SEL) +/** @defgroup RCC_LL_EC_SAI1 Peripheral SAI get clock source + * @{ + */ +#if defined(RCC_CCIPR2_SAI1SEL) +#define LL_RCC_SAI1_CLKSOURCE RCC_CCIPR2_SAI1SEL /*!< SAI1 Clock source selection */ +#else +#define LL_RCC_SAI1_CLKSOURCE RCC_CCIPR_SAI1SEL /*!< SAI1 Clock source selection */ +#endif /* RCC_CCIPR2_SAI1SEL */ +#if defined(RCC_CCIPR2_SAI2SEL) +#define LL_RCC_SAI2_CLKSOURCE RCC_CCIPR2_SAI2SEL /*!< SAI2 Clock source selection */ +#elif defined(RCC_CCIPR_SAI2SEL) +#define LL_RCC_SAI2_CLKSOURCE RCC_CCIPR_SAI2SEL /*!< SAI2 Clock source selection */ +#endif /* RCC_CCIPR2_SAI2SEL */ +/** + * @} + */ +#endif /* RCC_CCIPR_SAI1SEL || RCC_CCIPR2_SAI1SEL */ + +#if defined(SDMMC1) +#if defined(RCC_CCIPR2_SDMMCSEL) +/** @defgroup RCC_LL_EC_SDMMC1_KERNEL Peripheral SDMMC get kernel clock source + * @{ + */ +#define LL_RCC_SDMMC1_KERNELCLKSOURCE RCC_CCIPR2_SDMMCSEL /*!< SDMMC1 Kernel Clock source selection */ +/** + * @} + */ +#endif /* RCC_CCIPR2_SDMMCSEL */ + +/** @defgroup RCC_LL_EC_SDMMC1 Peripheral SDMMC get clock source + * @{ + */ +#define LL_RCC_SDMMC1_CLKSOURCE RCC_CCIPR_CLK48SEL /*!< SDMMC1 Clock source selection */ +/** + * @} + */ +#endif /* SDMMC1 */ + +/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source + * @{ + */ +#define LL_RCC_RNG_CLKSOURCE RCC_CCIPR_CLK48SEL /*!< RNG Clock source selection */ +/** + * @} + */ + +#if defined(USB_OTG_FS) || defined(USB) +/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source + * @{ + */ +#define LL_RCC_USB_CLKSOURCE RCC_CCIPR_CLK48SEL /*!< USB Clock source selection */ +/** + * @} + */ +#endif /* USB_OTG_FS || USB */ + +/** @defgroup RCC_LL_EC_ADC Peripheral ADC get clock source + * @{ + */ +#if defined(RCC_CCIPR_ADCSEL) +#define LL_RCC_ADC_CLKSOURCE RCC_CCIPR_ADCSEL /*!< ADC Clock source selection */ +#else +#define LL_RCC_ADC_CLKSOURCE 0x30000000U /*!< ADC Clock source selection */ +#endif +/** + * @} + */ + +#if defined(SWPMI1) +/** @defgroup RCC_LL_EC_SWPMI1 Peripheral SWPMI1 get clock source + * @{ + */ +#define LL_RCC_SWPMI1_CLKSOURCE RCC_CCIPR_SWPMI1SEL /*!< SWPMI1 Clock source selection */ +/** + * @} + */ +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Channel0) +#if defined(RCC_CCIPR2_ADFSDM1SEL) +/** @defgroup RCC_LL_EC_DFSDM1_AUDIO Peripheral DFSDM1 Audio get clock source + * @{ + */ +#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE RCC_CCIPR2_ADFSDM1SEL /* DFSDM1 Audio Clock source selection */ +/** + * @} + */ + +#endif /* RCC_CCIPR2_ADFSDM1SEL */ +/** @defgroup RCC_LL_EC_DFSDM1 Peripheral DFSDM1 get clock source + * @{ + */ +#if defined(RCC_CCIPR2_DFSDM1SEL) +#define LL_RCC_DFSDM1_CLKSOURCE RCC_CCIPR2_DFSDM1SEL /*!< DFSDM1 Clock source selection */ +#else +#define LL_RCC_DFSDM1_CLKSOURCE RCC_CCIPR_DFSDM1SEL /*!< DFSDM1 Clock source selection */ +#endif /* RCC_CCIPR2_DFSDM1SEL */ +/** + * @} + */ +#endif /* DFSDM1_Channel0 */ + +#if defined(DSI) +/** @defgroup RCC_LL_EC_DSI Peripheral DSI get clock source + * @{ + */ +#define LL_RCC_DSI_CLKSOURCE RCC_CCIPR2_DSISEL /*!< DSI Clock source selection */ +/** + * @} + */ +#endif /* DSI */ + +#if defined(LTDC) +/** @defgroup RCC_LL_EC_LTDC Peripheral LTDC get clock source + * @{ + */ +#define LL_RCC_LTDC_CLKSOURCE RCC_CCIPR2_PLLSAI2DIVR /*!< LTDC Clock source selection */ +/** + * @} + */ +#endif /* LTDC */ + +#if defined(OCTOSPI1) +/** @defgroup RCC_LL_EC_OCTOSPI Peripheral OCTOSPI get clock source + * @{ + */ +#define LL_RCC_OCTOSPI_CLKSOURCE RCC_CCIPR2_OSPISEL /*!< OctoSPI Clock source selection */ +/** + * @} + */ +#endif /* OCTOSPI1 */ + + +/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection + * @{ + */ +#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */ +#define LL_RCC_RTC_CLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */ +/** + * @} + */ + + +/** @defgroup RCC_LL_EC_PLLSOURCE PLL, PLLSAI1 and PLLSAI2 entry clock source + * @{ + */ +#define LL_RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock */ +#define LL_RCC_PLLSOURCE_MSI RCC_PLLCFGR_PLLSRC_MSI /*!< MSI clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI16 clock selected as PLL entry clock source */ +#define LL_RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLM_DIV PLL division factor + * @{ + */ +#define LL_RCC_PLLM_DIV_1 0x00000000U /*!< Main PLL division factor for PLLM input by 1 */ +#define LL_RCC_PLLM_DIV_2 (RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 2 */ +#define LL_RCC_PLLM_DIV_3 (RCC_PLLCFGR_PLLM_1) /*!< Main PLL division factor for PLLM input by 3 */ +#define LL_RCC_PLLM_DIV_4 (RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 4 */ +#define LL_RCC_PLLM_DIV_5 (RCC_PLLCFGR_PLLM_2) /*!< Main PLL division factor for PLLM input by 5 */ +#define LL_RCC_PLLM_DIV_6 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 6 */ +#define LL_RCC_PLLM_DIV_7 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< Main PLL division factor for PLLM input by 7 */ +#define LL_RCC_PLLM_DIV_8 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 8 */ +#if defined(RCC_PLLM_DIV_1_16_SUPPORT) +#define LL_RCC_PLLM_DIV_9 (RCC_PLLCFGR_PLLM_3) /*!< Main PLL division factor for PLLM input by 9 */ +#define LL_RCC_PLLM_DIV_10 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 10 */ +#define LL_RCC_PLLM_DIV_11 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< Main PLL division factor for PLLM input by 11 */ +#define LL_RCC_PLLM_DIV_12 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 12 */ +#define LL_RCC_PLLM_DIV_13 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< Main PLL division factor for PLLM input by 13 */ +#define LL_RCC_PLLM_DIV_14 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 14 */ +#define LL_RCC_PLLM_DIV_15 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< Main PLL division factor for PLLM input by 15 */ +#define LL_RCC_PLLM_DIV_16 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 16 */ +#endif /* RCC_PLLM_DIV_1_16_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLR_DIV PLL division factor (PLLR) + * @{ + */ +#define LL_RCC_PLLR_DIV_2 0x00000000U /*!< Main PLL division factor for PLLCLK (system clock) by 2 */ +#define LL_RCC_PLLR_DIV_4 (RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 4 */ +#define LL_RCC_PLLR_DIV_6 (RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 6 */ +#define LL_RCC_PLLR_DIV_8 (RCC_PLLCFGR_PLLR) /*!< Main PLL division factor for PLLCLK (system clock) by 8 */ +/** + * @} + */ + +#if defined(RCC_PLLP_SUPPORT) +/** @defgroup RCC_LL_EC_PLLP_DIV PLL division factor (PLLP) + * @{ + */ +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) +#define LL_RCC_PLLP_DIV_2 (RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 2 */ +#define LL_RCC_PLLP_DIV_3 (RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 3 */ +#define LL_RCC_PLLP_DIV_4 (RCC_PLLCFGR_PLLPDIV_2) /*!< Main PLL division factor for PLLP output by 4 */ +#define LL_RCC_PLLP_DIV_5 (RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 5 */ +#define LL_RCC_PLLP_DIV_6 (RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 6 */ +#define LL_RCC_PLLP_DIV_7 (RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 7 */ +#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLPDIV_3) /*!< Main PLL division factor for PLLP output by 8 */ +#define LL_RCC_PLLP_DIV_9 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 9 */ +#define LL_RCC_PLLP_DIV_10 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 10 */ +#define LL_RCC_PLLP_DIV_11 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 11 */ +#define LL_RCC_PLLP_DIV_12 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2) /*!< Main PLL division factor for PLLP output by 12 */ +#define LL_RCC_PLLP_DIV_13 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 13 */ +#define LL_RCC_PLLP_DIV_14 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 14 */ +#define LL_RCC_PLLP_DIV_15 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 15 */ +#define LL_RCC_PLLP_DIV_16 (RCC_PLLCFGR_PLLPDIV_4) /*!< Main PLL division factor for PLLP output by 16 */ +#define LL_RCC_PLLP_DIV_17 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 17 */ +#define LL_RCC_PLLP_DIV_18 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 18 */ +#define LL_RCC_PLLP_DIV_19 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 19 */ +#define LL_RCC_PLLP_DIV_20 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_2) /*!< Main PLL division factor for PLLP output by 20 */ +#define LL_RCC_PLLP_DIV_21 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 21 */ +#define LL_RCC_PLLP_DIV_22 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 22 */ +#define LL_RCC_PLLP_DIV_23 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 23 */ +#define LL_RCC_PLLP_DIV_24 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3) /*!< Main PLL division factor for PLLP output by 24 */ +#define LL_RCC_PLLP_DIV_25 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 25 */ +#define LL_RCC_PLLP_DIV_26 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 26 */ +#define LL_RCC_PLLP_DIV_27 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 27 */ +#define LL_RCC_PLLP_DIV_28 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2) /*!< Main PLL division factor for PLLP output by 28 */ +#define LL_RCC_PLLP_DIV_29 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 29 */ +#define LL_RCC_PLLP_DIV_30 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 30 */ +#define LL_RCC_PLLP_DIV_31 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 31 */ +#else +#define LL_RCC_PLLP_DIV_7 0x00000000U /*!< Main PLL division factor for PLLP output by 7 */ +#define LL_RCC_PLLP_DIV_17 (RCC_PLLCFGR_PLLP) /*!< Main PLL division factor for PLLP output by 17 */ +#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ +/** + * @} + */ +#endif /* RCC_PLLP_SUPPORT */ + +/** @defgroup RCC_LL_EC_PLLQ_DIV PLL division factor (PLLQ) + * @{ + */ +#define LL_RCC_PLLQ_DIV_2 0x00000000U /*!< Main PLL division factor for PLLQ output by 2 */ +#define LL_RCC_PLLQ_DIV_4 (RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 4 */ +#define LL_RCC_PLLQ_DIV_6 (RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 6 */ +#define LL_RCC_PLLQ_DIV_8 (RCC_PLLCFGR_PLLQ) /*!< Main PLL division factor for PLLQ output by 8 */ +/** + * @} + */ + +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) +/** @defgroup RCC_LL_EC_PLLSAI1M PLLSAI1 division factor (PLLSAI1M) + * @{ + */ +#define LL_RCC_PLLSAI1M_DIV_1 0x00000000U /*!< PLLSAI1 division factor for PLLSAI1M input by 1 */ +#define LL_RCC_PLLSAI1M_DIV_2 (RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 2 */ +#define LL_RCC_PLLSAI1M_DIV_3 (RCC_PLLSAI1CFGR_PLLSAI1M_1) /*!< PLLSAI1 division factor for PLLSAI1M input by 3 */ +#define LL_RCC_PLLSAI1M_DIV_4 (RCC_PLLSAI1CFGR_PLLSAI1M_1|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 4 */ +#define LL_RCC_PLLSAI1M_DIV_5 (RCC_PLLSAI1CFGR_PLLSAI1M_2) /*!< PLLSAI1 division factor for PLLSAI1M input by 5 */ +#define LL_RCC_PLLSAI1M_DIV_6 (RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 6 */ +#define LL_RCC_PLLSAI1M_DIV_7 (RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_1) /*!< PLLSAI1 division factor for PLLSAI1M input by 7 */ +#define LL_RCC_PLLSAI1M_DIV_8 (RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_1|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 8 */ +#define LL_RCC_PLLSAI1M_DIV_9 (RCC_PLLSAI1CFGR_PLLSAI1M_3) /*!< PLLSAI1 division factor for PLLSAI1M input by 9 */ +#define LL_RCC_PLLSAI1M_DIV_10 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 10 */ +#define LL_RCC_PLLSAI1M_DIV_11 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_1) /*!< PLLSAI1 division factor for PLLSAI1M input by 11 */ +#define LL_RCC_PLLSAI1M_DIV_12 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_1|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 12 */ +#define LL_RCC_PLLSAI1M_DIV_13 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_2) /*!< PLLSAI1 division factor for PLLSAI1M input by 13 */ +#define LL_RCC_PLLSAI1M_DIV_14 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 14 */ +#define LL_RCC_PLLSAI1M_DIV_15 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_1) /*!< PLLSAI1 division factor for PLLSAI1M input by 15 */ +#define LL_RCC_PLLSAI1M_DIV_16 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_1|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 16 */ +/** + * @} + */ +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + +#if defined(RCC_PLLSAI1_SUPPORT) +/** @defgroup RCC_LL_EC_PLLSAI1Q PLLSAI1 division factor (PLLSAI1Q) + * @{ + */ +#define LL_RCC_PLLSAI1Q_DIV_2 0x00000000U /*!< PLLSAI1 division factor for PLLSAI1Q output by 2 */ +#define LL_RCC_PLLSAI1Q_DIV_4 (RCC_PLLSAI1CFGR_PLLSAI1Q_0) /*!< PLLSAI1 division factor for PLLSAI1Q output by 4 */ +#define LL_RCC_PLLSAI1Q_DIV_6 (RCC_PLLSAI1CFGR_PLLSAI1Q_1) /*!< PLLSAI1 division factor for PLLSAI1Q output by 6 */ +#define LL_RCC_PLLSAI1Q_DIV_8 (RCC_PLLSAI1CFGR_PLLSAI1Q) /*!< PLLSAI1 division factor for PLLSAI1Q output by 8 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLSAI1P PLLSAI1 division factor (PLLSAI1P) + * @{ + */ +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) +#define LL_RCC_PLLSAI1P_DIV_2 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 2 */ +#define LL_RCC_PLLSAI1P_DIV_3 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 3 */ +#define LL_RCC_PLLSAI1P_DIV_4 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_2) /*!< PLLSAI1 division factor for PLLSAI1P output by 4 */ +#define LL_RCC_PLLSAI1P_DIV_5 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 5 */ +#define LL_RCC_PLLSAI1P_DIV_6 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 6 */ +#define LL_RCC_PLLSAI1P_DIV_7 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 7 */ +#define LL_RCC_PLLSAI1P_DIV_8 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3) /*!< PLLSAI1 division factor for PLLSAI1P output by 8 */ +#define LL_RCC_PLLSAI1P_DIV_9 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 9 */ +#define LL_RCC_PLLSAI1P_DIV_10 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 10 */ +#define LL_RCC_PLLSAI1P_DIV_11 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 1 */ +#define LL_RCC_PLLSAI1P_DIV_12 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2) /*!< PLLSAI1 division factor for PLLSAI1P output by 12 */ +#define LL_RCC_PLLSAI1P_DIV_13 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 13 */ +#define LL_RCC_PLLSAI1P_DIV_14 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 14 */ +#define LL_RCC_PLLSAI1P_DIV_15 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 15 */ +#define LL_RCC_PLLSAI1P_DIV_16 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4) /*!< PLLSAI1 division factor for PLLSAI1P output by 16 */ +#define LL_RCC_PLLSAI1P_DIV_17 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 17 */ +#define LL_RCC_PLLSAI1P_DIV_18 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 18 */ +#define LL_RCC_PLLSAI1P_DIV_19 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 19 */ +#define LL_RCC_PLLSAI1P_DIV_20 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2) /*!< PLLSAI1 division factor for PLLSAI1P output by 20 */ +#define LL_RCC_PLLSAI1P_DIV_21 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division fctor for PLLSAI1P output by 21 */ +#define LL_RCC_PLLSAI1P_DIV_22 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 22 */ +#define LL_RCC_PLLSAI1P_DIV_23 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 23 */ +#define LL_RCC_PLLSAI1P_DIV_24 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3) /*!< PLLSAI1 division factor for PLLSAI1P output by 24 */ +#define LL_RCC_PLLSAI1P_DIV_25 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 25 */ +#define LL_RCC_PLLSAI1P_DIV_26 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 26 */ +#define LL_RCC_PLLSAI1P_DIV_27 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 27 */ +#define LL_RCC_PLLSAI1P_DIV_28 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2) /*!< PLLSAI1 division factor for PLLSAI1P output by 28 */ +#define LL_RCC_PLLSAI1P_DIV_29 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 29 */ +#define LL_RCC_PLLSAI1P_DIV_30 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 30 */ +#define LL_RCC_PLLSAI1P_DIV_31 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 31 */ +#else +#define LL_RCC_PLLSAI1P_DIV_7 0x00000000U /*!< PLLSAI1 division factor for PLLSAI1P output by 7 */ +#define LL_RCC_PLLSAI1P_DIV_17 (RCC_PLLSAI1CFGR_PLLSAI1P) /*!< PLLSAI1 division factor for PLLSAI1P output by 17 */ +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLSAI1R PLLSAI1 division factor (PLLSAI1R) + * @{ + */ +#define LL_RCC_PLLSAI1R_DIV_2 0x00000000U /*!< PLLSAI1 division factor for PLLSAI1R output by 2 */ +#define LL_RCC_PLLSAI1R_DIV_4 (RCC_PLLSAI1CFGR_PLLSAI1R_0) /*!< PLLSAI1 division factor for PLLSAI1R output by 4 */ +#define LL_RCC_PLLSAI1R_DIV_6 (RCC_PLLSAI1CFGR_PLLSAI1R_1) /*!< PLLSAI1 division factor for PLLSAI1R output by 6 */ +#define LL_RCC_PLLSAI1R_DIV_8 (RCC_PLLSAI1CFGR_PLLSAI1R) /*!< PLLSAI1 division factor for PLLSAI1R output by 8 */ +/** + * @} + */ +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) +/** @defgroup RCC_LL_EC_PLLSAI2M PLLSAI1 division factor (PLLSAI2M) + * @{ + */ +#define LL_RCC_PLLSAI2M_DIV_1 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2M input by 1 */ +#define LL_RCC_PLLSAI2M_DIV_2 (RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 2 */ +#define LL_RCC_PLLSAI2M_DIV_3 (RCC_PLLSAI2CFGR_PLLSAI2M_1) /*!< PLLSAI2 division factor for PLLSAI2M input by 3 */ +#define LL_RCC_PLLSAI2M_DIV_4 (RCC_PLLSAI2CFGR_PLLSAI2M_1|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 4 */ +#define LL_RCC_PLLSAI2M_DIV_5 (RCC_PLLSAI2CFGR_PLLSAI2M_2) /*!< PLLSAI2 division factor for PLLSAI2M input by 5 */ +#define LL_RCC_PLLSAI2M_DIV_6 (RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 6 */ +#define LL_RCC_PLLSAI2M_DIV_7 (RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_1) /*!< PLLSAI2 division factor for PLLSAI2M input by 7 */ +#define LL_RCC_PLLSAI2M_DIV_8 (RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_1|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 8 */ +#define LL_RCC_PLLSAI2M_DIV_9 (RCC_PLLSAI2CFGR_PLLSAI2M_3) /*!< PLLSAI2 division factor for PLLSAI2M input by 9 */ +#define LL_RCC_PLLSAI2M_DIV_10 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 10 */ +#define LL_RCC_PLLSAI2M_DIV_11 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_1) /*!< PLLSAI2 division factor for PLLSAI2M input by 11 */ +#define LL_RCC_PLLSAI2M_DIV_12 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_1|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 12 */ +#define LL_RCC_PLLSAI2M_DIV_13 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_2) /*!< PLLSAI2 division factor for PLLSAI2M input by 13 */ +#define LL_RCC_PLLSAI2M_DIV_14 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 14 */ +#define LL_RCC_PLLSAI2M_DIV_15 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_1) /*!< PLLSAI2 division factor for PLLSAI2M input by 15 */ +#define LL_RCC_PLLSAI2M_DIV_16 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_1|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 16 */ +/** + * @} + */ +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) +/** @defgroup RCC_LL_EC_PLLSAI2Q PLLSAI2 division factor (PLLSAI2Q) + * @{ + */ +#define LL_RCC_PLLSAI2Q_DIV_2 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2Q output by 2 */ +#define LL_RCC_PLLSAI2Q_DIV_4 (RCC_PLLSAI2CFGR_PLLSAI2Q_0) /*!< PLLSAI2 division factor for PLLSAI2Q output by 4 */ +#define LL_RCC_PLLSAI2Q_DIV_6 (RCC_PLLSAI2CFGR_PLLSAI2Q_1) /*!< PLLSAI2 division factor for PLLSAI2Q output by 6 */ +#define LL_RCC_PLLSAI2Q_DIV_8 (RCC_PLLSAI2CFGR_PLLSAI2Q) /*!< PLLSAI2 division factor for PLLSAI2Q output by 8 */ +/** + * @} + */ +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ + +/** @defgroup RCC_LL_EC_PLLSAI2P PLLSAI2 division factor (PLLSAI2P) + * @{ + */ +#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) +#define LL_RCC_PLLSAI2P_DIV_2 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 2 */ +#define LL_RCC_PLLSAI2P_DIV_3 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 3 */ +#define LL_RCC_PLLSAI2P_DIV_4 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_2) /*!< PLLSAI2 division factor for PLLSAI2P output by 4 */ +#define LL_RCC_PLLSAI2P_DIV_5 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 5 */ +#define LL_RCC_PLLSAI2P_DIV_6 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 6 */ +#define LL_RCC_PLLSAI2P_DIV_7 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 7 */ +#define LL_RCC_PLLSAI2P_DIV_8 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3) /*!< PLLSAI2 division factor for PLLSAI2P output by 8 */ +#define LL_RCC_PLLSAI2P_DIV_9 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 9 */ +#define LL_RCC_PLLSAI2P_DIV_10 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 10 */ +#define LL_RCC_PLLSAI2P_DIV_11 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 1 */ +#define LL_RCC_PLLSAI2P_DIV_12 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2) /*!< PLLSAI2 division factor for PLLSAI2P output by 12 */ +#define LL_RCC_PLLSAI2P_DIV_13 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 13 */ +#define LL_RCC_PLLSAI2P_DIV_14 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 14 */ +#define LL_RCC_PLLSAI2P_DIV_15 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 15 */ +#define LL_RCC_PLLSAI2P_DIV_16 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4) /*!< PLLSAI2 division factor for PLLSAI2P output by 16 */ +#define LL_RCC_PLLSAI2P_DIV_17 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 17 */ +#define LL_RCC_PLLSAI2P_DIV_18 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 18 */ +#define LL_RCC_PLLSAI2P_DIV_19 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 19 */ +#define LL_RCC_PLLSAI2P_DIV_20 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2) /*!< PLLSAI2 division factor for PLLSAI2P output by 20 */ +#define LL_RCC_PLLSAI2P_DIV_21 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division fctor for PLLSAI2P output by 21 */ +#define LL_RCC_PLLSAI2P_DIV_22 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 22 */ +#define LL_RCC_PLLSAI2P_DIV_23 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 23 */ +#define LL_RCC_PLLSAI2P_DIV_24 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3) /*!< PLLSAI2 division factor for PLLSAI2P output by 24 */ +#define LL_RCC_PLLSAI2P_DIV_25 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 25 */ +#define LL_RCC_PLLSAI2P_DIV_26 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 26 */ +#define LL_RCC_PLLSAI2P_DIV_27 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 27 */ +#define LL_RCC_PLLSAI2P_DIV_28 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2) /*!< PLLSAI2 division factor for PLLSAI2P output by 28 */ +#define LL_RCC_PLLSAI2P_DIV_29 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 29 */ +#define LL_RCC_PLLSAI2P_DIV_30 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 30 */ +#define LL_RCC_PLLSAI2P_DIV_31 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 31 */ +#else +#define LL_RCC_PLLSAI2P_DIV_7 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2P output by 7 */ +#define LL_RCC_PLLSAI2P_DIV_17 (RCC_PLLSAI2CFGR_PLLSAI2P) /*!< PLLSAI2 division factor for PLLSAI2P output by 17 */ +#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLSAI2R PLLSAI2 division factor (PLLSAI2R) + * @{ + */ +#define LL_RCC_PLLSAI2R_DIV_2 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2R output by 2 */ +#define LL_RCC_PLLSAI2R_DIV_4 (RCC_PLLSAI2CFGR_PLLSAI2R_0) /*!< PLLSAI2 division factor for PLLSAI2R output by 4 */ +#define LL_RCC_PLLSAI2R_DIV_6 (RCC_PLLSAI2CFGR_PLLSAI2R_1) /*!< PLLSAI2 division factor for PLLSAI2R output by 6 */ +#define LL_RCC_PLLSAI2R_DIV_8 (RCC_PLLSAI2CFGR_PLLSAI2R) /*!< PLLSAI2 division factor for PLLSAI2R output by 8 */ +/** + * @} + */ + +#if defined(RCC_CCIPR2_PLLSAI2DIVR) +/** @defgroup RCC_LL_EC_PLLSAI2DIVR PLLSAI2DIVR division factor (PLLSAI2DIVR) + * @{ + */ +#define LL_RCC_PLLSAI2DIVR_DIV_2 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2DIVR output by 2 */ +#define LL_RCC_PLLSAI2DIVR_DIV_4 RCC_CCIPR2_PLLSAI2DIVR_0 /*!< PLLSAI2 division factor for PLLSAI2DIVR output by 4 */ +#define LL_RCC_PLLSAI2DIVR_DIV_8 RCC_CCIPR2_PLLSAI2DIVR_1 /*!< PLLSAI2 division factor for PLLSAI2DIVR output by 8 */ +#define LL_RCC_PLLSAI2DIVR_DIV_16 (RCC_CCIPR2_PLLSAI2DIVR_1 | RCC_CCIPR2_PLLSAI2DIVR_0) /*!< PLLSAI2 division factor for PLLSAI2DIVR output by 16 */ +/** + * @} + */ +#endif /* RCC_CCIPR2_PLLSAI2DIVR */ +#endif /* RCC_PLLSAI2_SUPPORT */ + +/** @defgroup RCC_LL_EC_MSIRANGESEL MSI clock range selection + * @{ + */ +#define LL_RCC_MSIRANGESEL_STANDBY 0U /*!< MSI Range is provided by MSISRANGE */ +#define LL_RCC_MSIRANGESEL_RUN 1U /*!< MSI Range is provided by MSIRANGE */ +/** + * @} + */ + +#if defined(RCC_CSR_LSIPREDIV) +/** @defgroup RCC_LL_EC_LSIPREDIV LSI division factor + * @{ + */ +#define LL_RCC_LSI_PREDIV_1 0x00000000U /*!< LSI division factor by 1 */ +#define LL_RCC_LSI_PREDIV_128 RCC_CSR_LSIPREDIV /*!< LSI division factor by 128 */ +/** + * @} + */ +#endif /* RCC_CSR_LSIPREDIV */ + +/** Legacy definitions for compatibility purpose +@cond 0 +*/ +#if defined(DFSDM1_Channel0) +#define LL_RCC_DFSDM1_CLKSOURCE_PCLK LL_RCC_DFSDM1_CLKSOURCE_PCLK2 +#define LL_RCC_DFSDM_CLKSOURCE_PCLK LL_RCC_DFSDM1_CLKSOURCE_PCLK2 +#define LL_RCC_DFSDM_CLKSOURCE_SYSCLK LL_RCC_DFSDM1_CLKSOURCE_SYSCLK +#define LL_RCC_DFSDM_CLKSOURCE LL_RCC_DFSDM1_CLKSOURCE +#endif /* DFSDM1_Channel0 */ +#if defined(SWPMI1) +#define LL_RCC_SWPMI1_CLKSOURCE_PCLK LL_RCC_SWPMI1_CLKSOURCE_PCLK1 +#endif /* SWPMI1 */ +/** +@endcond + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RCC register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RCC register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) +/** + * @} + */ + +/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies + * @{ + */ + +/** + * @brief Helper macro to calculate the PLLCLK frequency on system domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 (*) + * @arg @ref LL_RCC_PLLM_DIV_10 (*) + * @arg @ref LL_RCC_PLLM_DIV_11 (*) + * @arg @ref LL_RCC_PLLM_DIV_12 (*) + * @arg @ref LL_RCC_PLLM_DIV_13 (*) + * @arg @ref LL_RCC_PLLM_DIV_14 (*) + * @arg @ref LL_RCC_PLLM_DIV_15 (*) + * @arg @ref LL_RCC_PLLM_DIV_16 (*) + * + * (*) value not defined in all devices. + * @param __PLLN__ Between 8 and 86 or 127 depending on devices + * @param __PLLR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLN__) / \ + ((((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos) + 1U) * 2U)) + +#if defined(RCC_PLLSAI1_SUPPORT) +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) +/** + * @brief Helper macro to calculate the PLLCLK frequency used on SAI domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 (*) + * @arg @ref LL_RCC_PLLM_DIV_10 (*) + * @arg @ref LL_RCC_PLLM_DIV_11 (*) + * @arg @ref LL_RCC_PLLM_DIV_12 (*) + * @arg @ref LL_RCC_PLLM_DIV_13 (*) + * @arg @ref LL_RCC_PLLM_DIV_14 (*) + * @arg @ref LL_RCC_PLLM_DIV_15 (*) + * @arg @ref LL_RCC_PLLM_DIV_16 (*) + * + * (*) value not defined in all devices. + * @param __PLLN__ Between 8 and 86 or 127 depending on devices + * @param __PLLP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLN__) / \ + ((__PLLP__) >> RCC_PLLCFGR_PLLPDIV_Pos)) + +#else +/** + * @brief Helper macro to calculate the PLLCLK frequency used on SAI domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLN__ Between 8 and 86 + * @param __PLLP__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLN__) / \ + (((__PLLP__) == LL_RCC_PLLP_DIV_7) ? 7U : 17U)) + +#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ +#endif /* RCC_PLLSAI1_SUPPORT */ + +/** + * @brief Helper macro to calculate the PLLCLK frequency used on 48M domain + * @note ex: @ref __LL_RCC_CALC_PLLCLK_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 (*) + * @arg @ref LL_RCC_PLLM_DIV_10 (*) + * @arg @ref LL_RCC_PLLM_DIV_11 (*) + * @arg @ref LL_RCC_PLLM_DIV_12 (*) + * @arg @ref LL_RCC_PLLM_DIV_13 (*) + * @arg @ref LL_RCC_PLLM_DIV_14 (*) + * @arg @ref LL_RCC_PLLM_DIV_15 (*) + * @arg @ref LL_RCC_PLLM_DIV_16 (*) + * + * (*) value not defined in all devices. + * @param __PLLN__ Between 8 and 86 or 127 depending on devices + * @param __PLLQ__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLCLK_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLN__) / \ + ((((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U)) + +#if defined(RCC_PLLSAI1_SUPPORT) +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) +/** + * @brief Helper macro to calculate the PLLSAI1 frequency used for SAI domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI1_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI1_GetDivider (), + * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLSAI1M__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1M_DIV_1 + * @arg @ref LL_RCC_PLLSAI1M_DIV_2 + * @arg @ref LL_RCC_PLLSAI1M_DIV_3 + * @arg @ref LL_RCC_PLLSAI1M_DIV_4 + * @arg @ref LL_RCC_PLLSAI1M_DIV_5 + * @arg @ref LL_RCC_PLLSAI1M_DIV_6 + * @arg @ref LL_RCC_PLLSAI1M_DIV_7 + * @arg @ref LL_RCC_PLLSAI1M_DIV_8 + * @arg @ref LL_RCC_PLLSAI1M_DIV_9 + * @arg @ref LL_RCC_PLLSAI1M_DIV_10 + * @arg @ref LL_RCC_PLLSAI1M_DIV_11 + * @arg @ref LL_RCC_PLLSAI1M_DIV_12 + * @arg @ref LL_RCC_PLLSAI1M_DIV_13 + * @arg @ref LL_RCC_PLLSAI1M_DIV_14 + * @arg @ref LL_RCC_PLLSAI1M_DIV_15 + * @arg @ref LL_RCC_PLLSAI1M_DIV_16 + * @param __PLLSAI1N__ Between 8 and 86 or 127 depending on devices + * @param __PLLSAI1P__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1P_DIV_2 + * @arg @ref LL_RCC_PLLSAI1P_DIV_3 + * @arg @ref LL_RCC_PLLSAI1P_DIV_4 + * @arg @ref LL_RCC_PLLSAI1P_DIV_5 + * @arg @ref LL_RCC_PLLSAI1P_DIV_6 + * @arg @ref LL_RCC_PLLSAI1P_DIV_7 + * @arg @ref LL_RCC_PLLSAI1P_DIV_8 + * @arg @ref LL_RCC_PLLSAI1P_DIV_9 + * @arg @ref LL_RCC_PLLSAI1P_DIV_10 + * @arg @ref LL_RCC_PLLSAI1P_DIV_11 + * @arg @ref LL_RCC_PLLSAI1P_DIV_12 + * @arg @ref LL_RCC_PLLSAI1P_DIV_13 + * @arg @ref LL_RCC_PLLSAI1P_DIV_14 + * @arg @ref LL_RCC_PLLSAI1P_DIV_15 + * @arg @ref LL_RCC_PLLSAI1P_DIV_16 + * @arg @ref LL_RCC_PLLSAI1P_DIV_17 + * @arg @ref LL_RCC_PLLSAI1P_DIV_18 + * @arg @ref LL_RCC_PLLSAI1P_DIV_19 + * @arg @ref LL_RCC_PLLSAI1P_DIV_20 + * @arg @ref LL_RCC_PLLSAI1P_DIV_21 + * @arg @ref LL_RCC_PLLSAI1P_DIV_22 + * @arg @ref LL_RCC_PLLSAI1P_DIV_23 + * @arg @ref LL_RCC_PLLSAI1P_DIV_24 + * @arg @ref LL_RCC_PLLSAI1P_DIV_25 + * @arg @ref LL_RCC_PLLSAI1P_DIV_26 + * @arg @ref LL_RCC_PLLSAI1P_DIV_27 + * @arg @ref LL_RCC_PLLSAI1P_DIV_28 + * @arg @ref LL_RCC_PLLSAI1P_DIV_29 + * @arg @ref LL_RCC_PLLSAI1P_DIV_30 + * @arg @ref LL_RCC_PLLSAI1P_DIV_31 + * @retval PLLSAI1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI1_SAI_FREQ(__INPUTFREQ__, __PLLSAI1M__, __PLLSAI1N__, __PLLSAI1P__) \ + ((__INPUTFREQ__) / ((((__PLLSAI1M__) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)) * (__PLLSAI1N__) / \ + ((__PLLSAI1P__) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos)) + +#elif defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) +/** + * @brief Helper macro to calculate the PLLSAI1 frequency used for SAI domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI1_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLSAI1N__ Between 8 and 86 or 127 depending on devices + * @param __PLLSAI1P__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1P_DIV_2 + * @arg @ref LL_RCC_PLLSAI1P_DIV_3 + * @arg @ref LL_RCC_PLLSAI1P_DIV_4 + * @arg @ref LL_RCC_PLLSAI1P_DIV_5 + * @arg @ref LL_RCC_PLLSAI1P_DIV_6 + * @arg @ref LL_RCC_PLLSAI1P_DIV_7 + * @arg @ref LL_RCC_PLLSAI1P_DIV_8 + * @arg @ref LL_RCC_PLLSAI1P_DIV_9 + * @arg @ref LL_RCC_PLLSAI1P_DIV_10 + * @arg @ref LL_RCC_PLLSAI1P_DIV_11 + * @arg @ref LL_RCC_PLLSAI1P_DIV_12 + * @arg @ref LL_RCC_PLLSAI1P_DIV_13 + * @arg @ref LL_RCC_PLLSAI1P_DIV_14 + * @arg @ref LL_RCC_PLLSAI1P_DIV_15 + * @arg @ref LL_RCC_PLLSAI1P_DIV_16 + * @arg @ref LL_RCC_PLLSAI1P_DIV_17 + * @arg @ref LL_RCC_PLLSAI1P_DIV_18 + * @arg @ref LL_RCC_PLLSAI1P_DIV_19 + * @arg @ref LL_RCC_PLLSAI1P_DIV_20 + * @arg @ref LL_RCC_PLLSAI1P_DIV_21 + * @arg @ref LL_RCC_PLLSAI1P_DIV_22 + * @arg @ref LL_RCC_PLLSAI1P_DIV_23 + * @arg @ref LL_RCC_PLLSAI1P_DIV_24 + * @arg @ref LL_RCC_PLLSAI1P_DIV_25 + * @arg @ref LL_RCC_PLLSAI1P_DIV_26 + * @arg @ref LL_RCC_PLLSAI1P_DIV_27 + * @arg @ref LL_RCC_PLLSAI1P_DIV_28 + * @arg @ref LL_RCC_PLLSAI1P_DIV_29 + * @arg @ref LL_RCC_PLLSAI1P_DIV_30 + * @arg @ref LL_RCC_PLLSAI1P_DIV_31 + * @retval PLLSAI1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI1_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI1N__, __PLLSAI1P__) \ + ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI1N__) / \ + ((__PLLSAI1P__) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos)) + +#else +/** + * @brief Helper macro to calculate the PLLSAI1 frequency used for SAI domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI1_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLSAI1N__ Between 8 and 86 + * @param __PLLSAI1P__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1P_DIV_7 + * @arg @ref LL_RCC_PLLSAI1P_DIV_17 + * @retval PLLSAI1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI1_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI1N__, __PLLSAI1P__) \ + ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI1N__) / \ + (((__PLLSAI1P__) == LL_RCC_PLLSAI1P_DIV_7) ? 7U : 17U)) + +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) +/** + * @brief Helper macro to calculate the PLLSAI1 frequency used on 48M domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI1_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI1_GetDivider (), + * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLSAI1M__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1M_DIV_1 + * @arg @ref LL_RCC_PLLSAI1M_DIV_2 + * @arg @ref LL_RCC_PLLSAI1M_DIV_3 + * @arg @ref LL_RCC_PLLSAI1M_DIV_4 + * @arg @ref LL_RCC_PLLSAI1M_DIV_5 + * @arg @ref LL_RCC_PLLSAI1M_DIV_6 + * @arg @ref LL_RCC_PLLSAI1M_DIV_7 + * @arg @ref LL_RCC_PLLSAI1M_DIV_8 + * @arg @ref LL_RCC_PLLSAI1M_DIV_9 + * @arg @ref LL_RCC_PLLSAI1M_DIV_10 + * @arg @ref LL_RCC_PLLSAI1M_DIV_11 + * @arg @ref LL_RCC_PLLSAI1M_DIV_12 + * @arg @ref LL_RCC_PLLSAI1M_DIV_13 + * @arg @ref LL_RCC_PLLSAI1M_DIV_14 + * @arg @ref LL_RCC_PLLSAI1M_DIV_15 + * @arg @ref LL_RCC_PLLSAI1M_DIV_16 + * @param __PLLSAI1N__ Between 8 and 86 or 127 depending on devices + * @param __PLLSAI1Q__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1Q_DIV_2 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_4 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_6 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_8 + * @retval PLLSAI1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI1_48M_FREQ(__INPUTFREQ__, __PLLSAI1M__, __PLLSAI1N__, __PLLSAI1Q__) \ + ((__INPUTFREQ__) / ((((__PLLSAI1M__) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)) * (__PLLSAI1N__) / \ + ((((__PLLSAI1Q__) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U)) + +#else +/** + * @brief Helper macro to calculate the PLLSAI1 frequency used on 48M domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI1_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLSAI1N__ Between 8 and 86 + * @param __PLLSAI1Q__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1Q_DIV_2 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_4 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_6 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_8 + * @retval PLLSAI1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI1_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI1N__, __PLLSAI1Q__) \ + ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI1N__) / \ + ((((__PLLSAI1Q__) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U)) + +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) +/** + * @brief Helper macro to calculate the PLLSAI1 frequency used on ADC domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI1_ADC_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI1_GetDivider (), + * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLSAI1M__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1M_DIV_1 + * @arg @ref LL_RCC_PLLSAI1M_DIV_2 + * @arg @ref LL_RCC_PLLSAI1M_DIV_3 + * @arg @ref LL_RCC_PLLSAI1M_DIV_4 + * @arg @ref LL_RCC_PLLSAI1M_DIV_5 + * @arg @ref LL_RCC_PLLSAI1M_DIV_6 + * @arg @ref LL_RCC_PLLSAI1M_DIV_7 + * @arg @ref LL_RCC_PLLSAI1M_DIV_8 + * @arg @ref LL_RCC_PLLSAI1M_DIV_9 + * @arg @ref LL_RCC_PLLSAI1M_DIV_10 + * @arg @ref LL_RCC_PLLSAI1M_DIV_11 + * @arg @ref LL_RCC_PLLSAI1M_DIV_12 + * @arg @ref LL_RCC_PLLSAI1M_DIV_13 + * @arg @ref LL_RCC_PLLSAI1M_DIV_14 + * @arg @ref LL_RCC_PLLSAI1M_DIV_15 + * @arg @ref LL_RCC_PLLSAI1M_DIV_16 + * @param __PLLSAI1N__ Between 8 and 86 or 127 depending on devices + * @param __PLLSAI1R__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1R_DIV_2 + * @arg @ref LL_RCC_PLLSAI1R_DIV_4 + * @arg @ref LL_RCC_PLLSAI1R_DIV_6 + * @arg @ref LL_RCC_PLLSAI1R_DIV_8 + * @retval PLLSAI1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI1_ADC_FREQ(__INPUTFREQ__, __PLLSAI1M__, __PLLSAI1N__, __PLLSAI1R__) \ + ((__INPUTFREQ__) / ((((__PLLSAI1M__) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)) * (__PLLSAI1N__) / \ + ((((__PLLSAI1R__) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) << 1U)) + +#else +/** + * @brief Helper macro to calculate the PLLSAI1 frequency used on ADC domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI1_ADC_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLSAI1N__ Between 8 and 86 + * @param __PLLSAI1R__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1R_DIV_2 + * @arg @ref LL_RCC_PLLSAI1R_DIV_4 + * @arg @ref LL_RCC_PLLSAI1R_DIV_6 + * @arg @ref LL_RCC_PLLSAI1R_DIV_8 + * @retval PLLSAI1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI1_ADC_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI1N__, __PLLSAI1R__) \ + ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI1N__) / \ + ((((__PLLSAI1R__) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) << 1U)) + +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) +/** + * @brief Helper macro to calculate the PLLSAI2 frequency used for SAI domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI2_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI2_GetDivider (), + * @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLSAI2M__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2M_DIV_1 + * @arg @ref LL_RCC_PLLSAI2M_DIV_2 + * @arg @ref LL_RCC_PLLSAI2M_DIV_3 + * @arg @ref LL_RCC_PLLSAI2M_DIV_4 + * @arg @ref LL_RCC_PLLSAI2M_DIV_5 + * @arg @ref LL_RCC_PLLSAI2M_DIV_6 + * @arg @ref LL_RCC_PLLSAI2M_DIV_7 + * @arg @ref LL_RCC_PLLSAI2M_DIV_8 + * @arg @ref LL_RCC_PLLSAI2M_DIV_9 + * @arg @ref LL_RCC_PLLSAI2M_DIV_10 + * @arg @ref LL_RCC_PLLSAI2M_DIV_11 + * @arg @ref LL_RCC_PLLSAI2M_DIV_12 + * @arg @ref LL_RCC_PLLSAI2M_DIV_13 + * @arg @ref LL_RCC_PLLSAI2M_DIV_14 + * @arg @ref LL_RCC_PLLSAI2M_DIV_15 + * @arg @ref LL_RCC_PLLSAI2M_DIV_16 + * @param __PLLSAI2N__ Between 8 and 86 or 127 depending on devices + * @param __PLLSAI2P__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2P_DIV_2 + * @arg @ref LL_RCC_PLLSAI2P_DIV_3 + * @arg @ref LL_RCC_PLLSAI2P_DIV_4 + * @arg @ref LL_RCC_PLLSAI2P_DIV_5 + * @arg @ref LL_RCC_PLLSAI2P_DIV_6 + * @arg @ref LL_RCC_PLLSAI2P_DIV_7 + * @arg @ref LL_RCC_PLLSAI2P_DIV_8 + * @arg @ref LL_RCC_PLLSAI2P_DIV_9 + * @arg @ref LL_RCC_PLLSAI2P_DIV_10 + * @arg @ref LL_RCC_PLLSAI2P_DIV_11 + * @arg @ref LL_RCC_PLLSAI2P_DIV_12 + * @arg @ref LL_RCC_PLLSAI2P_DIV_13 + * @arg @ref LL_RCC_PLLSAI2P_DIV_14 + * @arg @ref LL_RCC_PLLSAI2P_DIV_15 + * @arg @ref LL_RCC_PLLSAI2P_DIV_16 + * @arg @ref LL_RCC_PLLSAI2P_DIV_17 + * @arg @ref LL_RCC_PLLSAI2P_DIV_18 + * @arg @ref LL_RCC_PLLSAI2P_DIV_19 + * @arg @ref LL_RCC_PLLSAI2P_DIV_20 + * @arg @ref LL_RCC_PLLSAI2P_DIV_21 + * @arg @ref LL_RCC_PLLSAI2P_DIV_22 + * @arg @ref LL_RCC_PLLSAI2P_DIV_23 + * @arg @ref LL_RCC_PLLSAI2P_DIV_24 + * @arg @ref LL_RCC_PLLSAI2P_DIV_25 + * @arg @ref LL_RCC_PLLSAI2P_DIV_26 + * @arg @ref LL_RCC_PLLSAI2P_DIV_27 + * @arg @ref LL_RCC_PLLSAI2P_DIV_28 + * @arg @ref LL_RCC_PLLSAI2P_DIV_29 + * @arg @ref LL_RCC_PLLSAI2P_DIV_30 + * @arg @ref LL_RCC_PLLSAI2P_DIV_31 + * @retval PLLSAI2 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI2_SAI_FREQ(__INPUTFREQ__, __PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__) \ + ((__INPUTFREQ__) / ((((__PLLSAI2M__) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)) * (__PLLSAI2N__) / \ + ((__PLLSAI2P__) >> RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos)) + +#elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) +/** + * @brief Helper macro to calculate the PLLSAI2 frequency used for SAI domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI2_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLSAI2N__ Between 8 and 86 or 127 depending on devices + * @param __PLLSAI2P__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2P_DIV_2 + * @arg @ref LL_RCC_PLLSAI2P_DIV_3 + * @arg @ref LL_RCC_PLLSAI2P_DIV_4 + * @arg @ref LL_RCC_PLLSAI2P_DIV_5 + * @arg @ref LL_RCC_PLLSAI2P_DIV_6 + * @arg @ref LL_RCC_PLLSAI2P_DIV_7 + * @arg @ref LL_RCC_PLLSAI2P_DIV_8 + * @arg @ref LL_RCC_PLLSAI2P_DIV_9 + * @arg @ref LL_RCC_PLLSAI2P_DIV_10 + * @arg @ref LL_RCC_PLLSAI2P_DIV_11 + * @arg @ref LL_RCC_PLLSAI2P_DIV_12 + * @arg @ref LL_RCC_PLLSAI2P_DIV_13 + * @arg @ref LL_RCC_PLLSAI2P_DIV_14 + * @arg @ref LL_RCC_PLLSAI2P_DIV_15 + * @arg @ref LL_RCC_PLLSAI2P_DIV_16 + * @arg @ref LL_RCC_PLLSAI2P_DIV_17 + * @arg @ref LL_RCC_PLLSAI2P_DIV_18 + * @arg @ref LL_RCC_PLLSAI2P_DIV_19 + * @arg @ref LL_RCC_PLLSAI2P_DIV_20 + * @arg @ref LL_RCC_PLLSAI2P_DIV_21 + * @arg @ref LL_RCC_PLLSAI2P_DIV_22 + * @arg @ref LL_RCC_PLLSAI2P_DIV_23 + * @arg @ref LL_RCC_PLLSAI2P_DIV_24 + * @arg @ref LL_RCC_PLLSAI2P_DIV_25 + * @arg @ref LL_RCC_PLLSAI2P_DIV_26 + * @arg @ref LL_RCC_PLLSAI2P_DIV_27 + * @arg @ref LL_RCC_PLLSAI2P_DIV_28 + * @arg @ref LL_RCC_PLLSAI2P_DIV_29 + * @arg @ref LL_RCC_PLLSAI2P_DIV_30 + * @arg @ref LL_RCC_PLLSAI2P_DIV_31 + * @retval PLLSAI2 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI2_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI2N__, __PLLSAI2P__) \ + ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI2N__) / \ + ((__PLLSAI2P__) >> RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos)) + +#else +/** + * @brief Helper macro to calculate the PLLSAI2 frequency used for SAI domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI2_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetP ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLSAI2N__ Between 8 and 86 + * @param __PLLSAI2P__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2P_DIV_7 + * @arg @ref LL_RCC_PLLSAI2P_DIV_17 + * @retval PLLSAI2 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI2_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI2N__, __PLLSAI2P__) \ + ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1)) * (__PLLSAI2N__) / \ + (((__PLLSAI2P__) == LL_RCC_PLLSAI2P_DIV_7) ? 7U : 17U)) + +#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ + +#if defined(LTDC) +/** + * @brief Helper macro to calculate the PLLSAI2 frequency used for LTDC domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI2_LTDC_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI2_GetDivider (), + * @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetR (), @ref LL_RCC_PLLSAI2_GetDIVR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI/MSI) + * @param __PLLSAI2M__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2M_DIV_1 + * @arg @ref LL_RCC_PLLSAI2M_DIV_2 + * @arg @ref LL_RCC_PLLSAI2M_DIV_3 + * @arg @ref LL_RCC_PLLSAI2M_DIV_4 + * @arg @ref LL_RCC_PLLSAI2M_DIV_5 + * @arg @ref LL_RCC_PLLSAI2M_DIV_6 + * @arg @ref LL_RCC_PLLSAI2M_DIV_7 + * @arg @ref LL_RCC_PLLSAI2M_DIV_8 + * @arg @ref LL_RCC_PLLSAI2M_DIV_9 + * @arg @ref LL_RCC_PLLSAI2M_DIV_10 + * @arg @ref LL_RCC_PLLSAI2M_DIV_11 + * @arg @ref LL_RCC_PLLSAI2M_DIV_12 + * @arg @ref LL_RCC_PLLSAI2M_DIV_13 + * @arg @ref LL_RCC_PLLSAI2M_DIV_14 + * @arg @ref LL_RCC_PLLSAI2M_DIV_15 + * @arg @ref LL_RCC_PLLSAI2M_DIV_16 + * @param __PLLSAI2N__ Between 8 and 127 + * @param __PLLSAI2R__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2R_DIV_2 + * @arg @ref LL_RCC_PLLSAI2R_DIV_4 + * @arg @ref LL_RCC_PLLSAI2R_DIV_6 + * @arg @ref LL_RCC_PLLSAI2R_DIV_8 + * @param __PLLSAI2DIVR__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_2 + * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_4 + * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_8 + * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_16 + * @retval PLLSAI2 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI2_LTDC_FREQ(__INPUTFREQ__, __PLLSAI2M__, __PLLSAI2N__, __PLLSAI2R__, __PLLSAI2DIVR__) \ + (((__INPUTFREQ__) / (((__PLLSAI2M__)>> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)) * (__PLLSAI2N__) / \ + (((((__PLLSAI2R__) >> RCC_PLLSAI2CFGR_PLLSAI2R_Pos ) + 1U) << 1U) * (2UL << ((__PLLSAI2DIVR__) >> RCC_CCIPR2_PLLSAI2DIVR_Pos)))) +#elif defined(RCC_PLLSAI2_SUPPORT) +/** + * @brief Helper macro to calculate the PLLSAI2 frequency used on ADC domain + * @note ex: @ref __LL_RCC_CALC_PLLSAI2_ADC_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (), + * @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetR ()); + * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI) + * @param __PLLM__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param __PLLSAI2N__ Between 8 and 86 + * @param __PLLSAI2R__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2R_DIV_2 + * @arg @ref LL_RCC_PLLSAI2R_DIV_4 + * @arg @ref LL_RCC_PLLSAI2R_DIV_6 + * @arg @ref LL_RCC_PLLSAI2R_DIV_8 + * @retval PLLSAI2 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI2_ADC_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI2N__, __PLLSAI2R__) \ + ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI2N__) / \ + ((((__PLLSAI2R__) >> RCC_PLLSAI2CFGR_PLLSAI2R_Pos ) + 1U) << 1U)) + +#endif /* LTDC */ + +#if defined(DSI) +/** + * @brief Helper macro to calculate the PLLDSICLK frequency used on DSI + * @note ex: @ref __LL_RCC_CALC_PLLSAI2_DSI_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI2_GetDivider (), + * @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetQ ()); + * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI/MSI) + * @param __PLLSAI2M__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2M_DIV_1 + * @arg @ref LL_RCC_PLLSAI2M_DIV_2 + * @arg @ref LL_RCC_PLLSAI2M_DIV_3 + * @arg @ref LL_RCC_PLLSAI2M_DIV_4 + * @arg @ref LL_RCC_PLLSAI2M_DIV_5 + * @arg @ref LL_RCC_PLLSAI2M_DIV_6 + * @arg @ref LL_RCC_PLLSAI2M_DIV_7 + * @arg @ref LL_RCC_PLLSAI2M_DIV_8 + * @arg @ref LL_RCC_PLLSAI2M_DIV_9 + * @arg @ref LL_RCC_PLLSAI2M_DIV_10 + * @arg @ref LL_RCC_PLLSAI2M_DIV_11 + * @arg @ref LL_RCC_PLLSAI2M_DIV_12 + * @arg @ref LL_RCC_PLLSAI2M_DIV_13 + * @arg @ref LL_RCC_PLLSAI2M_DIV_14 + * @arg @ref LL_RCC_PLLSAI2M_DIV_15 + * @arg @ref LL_RCC_PLLSAI2M_DIV_16 + * @param __PLLSAI2N__ Between 8 and 127 + * @param __PLLSAI2Q__ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2Q_DIV_2 + * @arg @ref LL_RCC_PLLSAI2Q_DIV_4 + * @arg @ref LL_RCC_PLLSAI2Q_DIV_6 + * @arg @ref LL_RCC_PLLSAI2Q_DIV_8 + * @retval PLL clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PLLSAI2_DSI_FREQ(__INPUTFREQ__, __PLLSAI2M__, __PLLSAI2N__, __PLLSAI2Q__) \ + ((__INPUTFREQ__) / ((((__PLLSAI2M__) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)) * (__PLLSAI2N__) / \ + ((((__PLLSAI2Q__) >> RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) + 1U) << 1U)) +#endif /* DSI */ + + + +/** + * @brief Helper macro to calculate the HCLK frequency + * @param __SYSCLKFREQ__ SYSCLK frequency (based on MSI/HSE/HSI/PLLCLK) + * @param __AHBPRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval HCLK clock frequency (in Hz) + */ +#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]) + +/** + * @brief Helper macro to calculate the PCLK1 frequency (ABP1) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB1PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE1_Pos]) + +/** + * @brief Helper macro to calculate the PCLK2 frequency (ABP2) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB2PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval PCLK2 clock frequency (in Hz) + */ +#define __LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB2PRESCALER__) >> RCC_CFGR_PPRE2_Pos]) + +/** + * @brief Helper macro to calculate the MSI frequency (in Hz) + * @note __MSISEL__ can be retrieved thanks to function LL_RCC_MSI_IsEnabledRangeSelect() + * @note if __MSISEL__ is equal to LL_RCC_MSIRANGESEL_STANDBY, + * __MSIRANGE__can be retrieved by LL_RCC_MSI_GetRangeAfterStandby() + * else by LL_RCC_MSI_GetRange() + * ex: __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(), + * (LL_RCC_MSI_IsEnabledRangeSelect()? + * LL_RCC_MSI_GetRange(): + * LL_RCC_MSI_GetRangeAfterStandby())) + * @param __MSISEL__ This parameter can be one of the following values: + * @arg @ref LL_RCC_MSIRANGESEL_STANDBY + * @arg @ref LL_RCC_MSIRANGESEL_RUN + * @param __MSIRANGE__ This parameter can be one of the following values: + * @arg @ref LL_RCC_MSIRANGE_0 + * @arg @ref LL_RCC_MSIRANGE_1 + * @arg @ref LL_RCC_MSIRANGE_2 + * @arg @ref LL_RCC_MSIRANGE_3 + * @arg @ref LL_RCC_MSIRANGE_4 + * @arg @ref LL_RCC_MSIRANGE_5 + * @arg @ref LL_RCC_MSIRANGE_6 + * @arg @ref LL_RCC_MSIRANGE_7 + * @arg @ref LL_RCC_MSIRANGE_8 + * @arg @ref LL_RCC_MSIRANGE_9 + * @arg @ref LL_RCC_MSIRANGE_10 + * @arg @ref LL_RCC_MSIRANGE_11 + * @arg @ref LL_RCC_MSISRANGE_4 + * @arg @ref LL_RCC_MSISRANGE_5 + * @arg @ref LL_RCC_MSISRANGE_6 + * @arg @ref LL_RCC_MSISRANGE_7 + * @retval MSI clock frequency (in Hz) + */ +#define __LL_RCC_CALC_MSI_FREQ(__MSISEL__, __MSIRANGE__) (((__MSISEL__) == LL_RCC_MSIRANGESEL_STANDBY) ? \ + (MSIRangeTable[(__MSIRANGE__) >> 8U]) : \ + (MSIRangeTable[(__MSIRANGE__) >> 4U])) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_LL_EF_HSE HSE + * @{ + */ + +/** + * @brief Enable the Clock Security System. + * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON); +} + +/** + * @brief Enable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Disable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Enable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Disable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Check if HSE oscillator Ready + * @rmtoll CR HSERDY LL_RCC_HSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSERDY) == RCC_CR_HSERDY) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI HSI + * @{ + */ + +/** + * @brief Enable HSI even in stop mode + * @note HSI oscillator is forced ON even in Stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_EnableInStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_EnableInStopMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Disable HSI in stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_DisableInStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_DisableInStopMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Check if HSI is enabled in stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_IsEnabledInStopMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsEnabledInStopMode(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIKERON) == RCC_CR_HSIKERON) ? 1UL : 0UL); +} + +/** + * @brief Enable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Disable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Check if HSI clock is ready + * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) == RCC_CR_HSIRDY) ? 1UL : 0UL); +} + +/** + * @brief Enable HSI Automatic from stop mode + * @rmtoll CR HSIASFS LL_RCC_HSI_EnableAutoFromStop + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_EnableAutoFromStop(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSIASFS); +} + +/** + * @brief Disable HSI Automatic from stop mode + * @rmtoll CR HSIASFS LL_RCC_HSI_DisableAutoFromStop + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_DisableAutoFromStop(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSIASFS); +} +/** + * @brief Get HSI Calibration value + * @note When HSITRIM is written, HSICAL is updated with the sum of + * HSITRIM and the factory trim value + * @rmtoll ICSCR HSICAL LL_RCC_HSI_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0xFF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSICAL) >> RCC_ICSCR_HSICAL_Pos); +} + +/** + * @brief Set HSI Calibration trimming + * @note user-programmable trimming value that is added to the HSICAL + * @note Default value is 16 on STM32L43x/STM32L44x/STM32L47x/STM32L48x or 64 on other devices, + * which, when added to the HSICAL value, should trim the HSI to 16 MHz +/- 1 % + * @rmtoll ICSCR HSITRIM LL_RCC_HSI_SetCalibTrimming + * @param Value Between Min_Data = 0 and Max_Data = 31 on STM32L43x/STM32L44x/STM32L47x/STM32L48x or + * between Min_Data = 0 and Max_Data = 127 on other devices + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, Value << RCC_ICSCR_HSITRIM_Pos); +} + +/** + * @brief Get HSI Calibration trimming + * @rmtoll ICSCR HSITRIM LL_RCC_HSI_GetCalibTrimming + * @retval Between Min_Data = 0 and Max_Data = 31 on STM32L43x/STM32L44x/STM32L47x/STM32L48x or + * between Min_Data = 0 and Max_Data = 127 on other devices + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos); +} + +/** + * @} + */ + +#if defined(RCC_HSI48_SUPPORT) +/** @defgroup RCC_LL_EF_HSI48 HSI48 + * @{ + */ + +/** + * @brief Enable HSI48 + * @rmtoll CRRCR HSI48ON LL_RCC_HSI48_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Enable(void) +{ + SET_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON); +} + +/** + * @brief Disable HSI48 + * @rmtoll CRRCR HSI48ON LL_RCC_HSI48_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Disable(void) +{ + CLEAR_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON); +} + +/** + * @brief Check if HSI48 oscillator Ready + * @rmtoll CRRCR HSI48RDY LL_RCC_HSI48_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_IsReady(void) +{ + return ((READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48RDY) == RCC_CRRCR_HSI48RDY) ? 1UL : 0UL); +} + +/** + * @brief Get HSI48 Calibration value + * @rmtoll CRRCR HSI48CAL LL_RCC_HSI48_GetCalibration + * @retval Between Min_Data = 0x00 and Max_Data = 0x1FF + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48CAL) >> RCC_CRRCR_HSI48CAL_Pos); +} + +/** + * @} + */ +#endif /* RCC_HSI48_SUPPORT */ + +/** @defgroup RCC_LL_EF_LSE LSE + * @{ + */ + +/** + * @brief Enable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Disable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Enable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Disable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Set LSE oscillator drive capability + * @note The oscillator is in Xtal mode when it is not in bypass mode. + * @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability + * @param LSEDrive This parameter can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive); +} + +/** + * @brief Get LSE oscillator drive capability + * @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV)); +} + +/** + * @brief Enable Clock security system on LSE. + * @rmtoll BDCR LSECSSON LL_RCC_LSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableCSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Disable Clock security system on LSE. + * @note Clock security system can be disabled only after a LSE + * failure detection. In that case it MUST be disabled by software. + * @rmtoll BDCR LSECSSON LL_RCC_LSE_DisableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableCSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Check if LSE oscillator Ready + * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == RCC_BDCR_LSERDY) ? 1UL : 0UL); +} + +/** + * @brief Check if CSS on LSE failure Detection + * @rmtoll BDCR LSECSSD LL_RCC_LSE_IsCSSDetected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsCSSDetected(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSECSSD) == RCC_BDCR_LSECSSD) ? 1UL : 0UL); +} + +#if defined(RCC_BDCR_LSESYSDIS) +/** + * @brief Disable LSE oscillator propagation + * @note LSE clock is not propagated to any peripheral except to RTC which remains clocked + * @note A 2 LSE-clock delay is needed for LSESYSDIS setting to be taken into account + * @rmtoll BDCR LSESYSDIS LL_RCC_LSE_DisablePropagation + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisablePropagation(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSESYSDIS); +} + +/** + * @brief Enable LSE oscillator propagation + * @note A 2 LSE-clock delay is needed for LSESYSDIS resetting to be taken into account + * @rmtoll BDCR LSESYSDIS LL_RCC_LSE_EnablePropagation + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnablePropagation(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSESYSDIS); +} + +/** + * @brief Check if LSE oscillator propagation is enabled + * @rmtoll BDCR LSESYSDIS LL_RCC_LSE_IsPropagationEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsPropagationEnabled(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSESYSDIS) == 0U) ? 1UL : 0UL); +} +#endif /* RCC_BDCR_LSESYSDIS */ +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSI LSI + * @{ + */ + +/** + * @brief Enable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Enable(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Disable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Disable(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Check if LSI is Ready + * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == RCC_CSR_LSIRDY) ? 1UL : 0UL); +} + +#if defined(RCC_CSR_LSIPREDIV) +/** + * @brief Set LSI division factor + * @rmtoll CSR LSIPREDIV LL_RCC_LSI_SetPrediv + * @param LSI_PREDIV This parameter can be one of the following values: + * @arg @ref LL_RCC_LSI_PREDIV_1 + * @arg @ref LL_RCC_LSI_PREDIV_128 + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_SetPrediv(uint32_t LSI_PREDIV) +{ + MODIFY_REG(RCC->CSR, RCC_CSR_LSIPREDIV, LSI_PREDIV); +} + +/** + * @brief Get LSI division factor + * @rmtoll CSR LSIPREDIV LL_RCC_LSI_GetPrediv + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSI_PREDIV_1 + * @arg @ref LL_RCC_LSI_PREDIV_128 + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_GetPrediv(void) +{ + return (READ_BIT(RCC->CSR, RCC_CSR_LSIPREDIV)); +} +#endif /* RCC_CSR_LSIPREDIV */ + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MSI MSI + * @{ + */ + +/** + * @brief Enable MSI oscillator + * @rmtoll CR MSION LL_RCC_MSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_MSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_MSION); +} + +/** + * @brief Disable MSI oscillator + * @rmtoll CR MSION LL_RCC_MSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_MSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_MSION); +} + +/** + * @brief Check if MSI oscillator Ready + * @rmtoll CR MSIRDY LL_RCC_MSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_MSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_MSIRDY) == RCC_CR_MSIRDY) ? 1UL : 0UL); +} + +/** + * @brief Enable MSI PLL-mode (Hardware auto calibration with LSE) + * @note MSIPLLEN must be enabled after LSE is enabled (LSEON enabled) + * and ready (LSERDY set by hardware) + * @note hardware protection to avoid enabling MSIPLLEN if LSE is not + * ready + * @rmtoll CR MSIPLLEN LL_RCC_MSI_EnablePLLMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_MSI_EnablePLLMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_MSIPLLEN); +} + +/** + * @brief Disable MSI-PLL mode + * @note cleared by hardware when LSE is disabled (LSEON = 0) or when + * the Clock Security System on LSE detects a LSE failure + * @rmtoll CR MSIPLLEN LL_RCC_MSI_DisablePLLMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_MSI_DisablePLLMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_MSIPLLEN); +} + +/** + * @brief Enable MSI clock range selection with MSIRANGE register + * @note Write 0 has no effect. After a standby or a reset + * MSIRGSEL is at 0 and the MSI range value is provided by + * MSISRANGE + * @rmtoll CR MSIRGSEL LL_RCC_MSI_EnableRangeSelection + * @retval None + */ +__STATIC_INLINE void LL_RCC_MSI_EnableRangeSelection(void) +{ + SET_BIT(RCC->CR, RCC_CR_MSIRGSEL); +} + +/** + * @brief Check if MSI clock range is selected with MSIRANGE register + * @rmtoll CR MSIRGSEL LL_RCC_MSI_IsEnabledRangeSelect + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_MSI_IsEnabledRangeSelect(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) == RCC_CR_MSIRGSEL) ? 1UL : 0UL); +} + +/** + * @brief Configure the Internal Multi Speed oscillator (MSI) clock range in run mode. + * @rmtoll CR MSIRANGE LL_RCC_MSI_SetRange + * @param Range This parameter can be one of the following values: + * @arg @ref LL_RCC_MSIRANGE_0 + * @arg @ref LL_RCC_MSIRANGE_1 + * @arg @ref LL_RCC_MSIRANGE_2 + * @arg @ref LL_RCC_MSIRANGE_3 + * @arg @ref LL_RCC_MSIRANGE_4 + * @arg @ref LL_RCC_MSIRANGE_5 + * @arg @ref LL_RCC_MSIRANGE_6 + * @arg @ref LL_RCC_MSIRANGE_7 + * @arg @ref LL_RCC_MSIRANGE_8 + * @arg @ref LL_RCC_MSIRANGE_9 + * @arg @ref LL_RCC_MSIRANGE_10 + * @arg @ref LL_RCC_MSIRANGE_11 + * @retval None + */ +__STATIC_INLINE void LL_RCC_MSI_SetRange(uint32_t Range) +{ + MODIFY_REG(RCC->CR, RCC_CR_MSIRANGE, Range); +} + +/** + * @brief Get the Internal Multi Speed oscillator (MSI) clock range in run mode. + * @rmtoll CR MSIRANGE LL_RCC_MSI_GetRange + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_MSIRANGE_0 + * @arg @ref LL_RCC_MSIRANGE_1 + * @arg @ref LL_RCC_MSIRANGE_2 + * @arg @ref LL_RCC_MSIRANGE_3 + * @arg @ref LL_RCC_MSIRANGE_4 + * @arg @ref LL_RCC_MSIRANGE_5 + * @arg @ref LL_RCC_MSIRANGE_6 + * @arg @ref LL_RCC_MSIRANGE_7 + * @arg @ref LL_RCC_MSIRANGE_8 + * @arg @ref LL_RCC_MSIRANGE_9 + * @arg @ref LL_RCC_MSIRANGE_10 + * @arg @ref LL_RCC_MSIRANGE_11 + */ +__STATIC_INLINE uint32_t LL_RCC_MSI_GetRange(void) +{ + return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_MSIRANGE)); +} + +/** + * @brief Configure MSI range used after standby + * @rmtoll CSR MSISRANGE LL_RCC_MSI_SetRangeAfterStandby + * @param Range This parameter can be one of the following values: + * @arg @ref LL_RCC_MSISRANGE_4 + * @arg @ref LL_RCC_MSISRANGE_5 + * @arg @ref LL_RCC_MSISRANGE_6 + * @arg @ref LL_RCC_MSISRANGE_7 + * @retval None + */ +__STATIC_INLINE void LL_RCC_MSI_SetRangeAfterStandby(uint32_t Range) +{ + MODIFY_REG(RCC->CSR, RCC_CSR_MSISRANGE, Range); +} + +/** + * @brief Get MSI range used after standby + * @rmtoll CSR MSISRANGE LL_RCC_MSI_GetRangeAfterStandby + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_MSISRANGE_4 + * @arg @ref LL_RCC_MSISRANGE_5 + * @arg @ref LL_RCC_MSISRANGE_6 + * @arg @ref LL_RCC_MSISRANGE_7 + */ +__STATIC_INLINE uint32_t LL_RCC_MSI_GetRangeAfterStandby(void) +{ + return (uint32_t)(READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE)); +} + +/** + * @brief Get MSI Calibration value + * @note When MSITRIM is written, MSICAL is updated with the sum of + * MSITRIM and the factory trim value + * @rmtoll ICSCR MSICAL LL_RCC_MSI_GetCalibration + * @retval Between Min_Data = 0 and Max_Data = 255 + */ +__STATIC_INLINE uint32_t LL_RCC_MSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_MSICAL) >> RCC_ICSCR_MSICAL_Pos); +} + +/** + * @brief Set MSI Calibration trimming + * @note user-programmable trimming value that is added to the MSICAL + * @rmtoll ICSCR MSITRIM LL_RCC_MSI_SetCalibTrimming + * @param Value Between Min_Data = 0 and Max_Data = 255 + * @retval None + */ +__STATIC_INLINE void LL_RCC_MSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->ICSCR, RCC_ICSCR_MSITRIM, Value << RCC_ICSCR_MSITRIM_Pos); +} + +/** + * @brief Get MSI Calibration trimming + * @rmtoll ICSCR MSITRIM LL_RCC_MSI_GetCalibTrimming + * @retval Between 0 and 255 + */ +__STATIC_INLINE uint32_t LL_RCC_MSI_GetCalibTrimming(void) +{ + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_MSITRIM) >> RCC_ICSCR_MSITRIM_Pos); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSCO LSCO + * @{ + */ + +/** + * @brief Enable Low speed clock + * @rmtoll BDCR LSCOEN LL_RCC_LSCO_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); +} + +/** + * @brief Disable Low speed clock + * @rmtoll BDCR LSCOEN LL_RCC_LSCO_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); +} + +/** + * @brief Configure Low speed clock selection + * @rmtoll BDCR LSCOSEL LL_RCC_LSCO_SetSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_SetSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL, Source); +} + +/** + * @brief Get Low speed clock selection + * @rmtoll BDCR LSCOSEL LL_RCC_LSCO_GetSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_LSCO_GetSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSCOSEL)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_System System + * @{ + */ + +/** + * @brief Configure the system clock source + * @rmtoll CFGR SW LL_RCC_SetSysClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_MSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); +} + +/** + * @brief Get the system clock source + * @rmtoll CFGR SWS LL_RCC_GetSysClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_MSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); +} + +/** + * @brief Set AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler); +} + +/** + * @brief Set APB1 prescaler + * @rmtoll CFGR PPRE1 LL_RCC_SetAPB1Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, Prescaler); +} + +/** + * @brief Set APB2 prescaler + * @rmtoll CFGR PPRE2 LL_RCC_SetAPB2Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, Prescaler); +} + +/** + * @brief Get AHB prescaler + * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)); +} + +/** + * @brief Get APB1 prescaler + * @rmtoll CFGR PPRE1 LL_RCC_GetAPB1Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1)); +} + +/** + * @brief Get APB2 prescaler + * @rmtoll CFGR PPRE2 LL_RCC_GetAPB2Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2)); +} + +/** + * @brief Set Clock After Wake-Up From Stop mode + * @rmtoll CFGR STOPWUCK LL_RCC_SetClkAfterWakeFromStop + * @param Clock This parameter can be one of the following values: + * @arg @ref LL_RCC_STOP_WAKEUPCLOCK_MSI + * @arg @ref LL_RCC_STOP_WAKEUPCLOCK_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetClkAfterWakeFromStop(uint32_t Clock) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, Clock); +} + +/** + * @brief Get Clock After Wake-Up From Stop mode + * @rmtoll CFGR STOPWUCK LL_RCC_GetClkAfterWakeFromStop + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_STOP_WAKEUPCLOCK_MSI + * @arg @ref LL_RCC_STOP_WAKEUPCLOCK_HSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetClkAfterWakeFromStop(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_STOPWUCK)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MCO MCO + * @{ + */ + +/** + * @brief Configure MCOx + * @rmtoll CFGR MCOSEL LL_RCC_ConfigMCO\n + * CFGR MCOPRE LL_RCC_ConfigMCO + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK + * @arg @ref LL_RCC_MCO1SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO1SOURCE_MSI + * @arg @ref LL_RCC_MCO1SOURCE_HSI + * @arg @ref LL_RCC_MCO1SOURCE_HSE + * @arg @ref LL_RCC_MCO1SOURCE_HSI48 (*) + * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK + * @arg @ref LL_RCC_MCO1SOURCE_LSI + * @arg @ref LL_RCC_MCO1SOURCE_LSE + * + * (*) value not defined in all devices. + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1_DIV_1 + * @arg @ref LL_RCC_MCO1_DIV_2 + * @arg @ref LL_RCC_MCO1_DIV_4 + * @arg @ref LL_RCC_MCO1_DIV_8 + * @arg @ref LL_RCC_MCO1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE, MCOxSource | MCOxPrescaler); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source + * @{ + */ + +/** + * @brief Configure USARTx clock source + * @rmtoll CCIPR USARTxSEL LL_RCC_SetUSARTClockSource + * @param USARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource) +{ + MODIFY_REG(RCC->CCIPR, (USARTxSource >> 16U), (USARTxSource & 0x0000FFFFU)); +} + +#if defined(UART4) || defined(UART5) +/** + * @brief Configure UARTx clock source + * @rmtoll CCIPR UARTxSEL LL_RCC_SetUARTClockSource + * @param UARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_UART4_CLKSOURCE_HSI + * @arg @ref LL_RCC_UART4_CLKSOURCE_LSE + * @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_UART5_CLKSOURCE_HSI + * @arg @ref LL_RCC_UART5_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUARTClockSource(uint32_t UARTxSource) +{ + MODIFY_REG(RCC->CCIPR, (UARTxSource >> 16U), (UARTxSource & 0x0000FFFFU)); +} +#endif /* UART4 || UART5 */ + +/** + * @brief Configure LPUART1x clock source + * @rmtoll CCIPR LPUART1SEL LL_RCC_SetLPUARTClockSource + * @param LPUARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPUARTClockSource(uint32_t LPUARTxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, LPUARTxSource); +} + +/** + * @brief Configure I2Cx clock source + * @rmtoll CCIPR I2CxSEL LL_RCC_SetI2CClockSource + * @param I2CxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_I2C4_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource) +{ + __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0x88U + (I2CxSource >> 24U)); + MODIFY_REG(*reg, 3UL << ((I2CxSource & 0x001F0000U) >> 16U), ((I2CxSource & 0x000000FFU) << ((I2CxSource & 0x001F0000U) >> 16U))); +} + +/** + * @brief Configure LPTIMx clock source + * @rmtoll CCIPR LPTIMxSEL LL_RCC_SetLPTIMClockSource + * @param LPTIMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource) +{ + MODIFY_REG(RCC->CCIPR, (LPTIMxSource & 0xFFFF0000U), (LPTIMxSource << 16U)); +} + +#if defined(RCC_CCIPR_SAI1SEL) || defined(RCC_CCIPR2_SAI1SEL) +/** + * @brief Configure SAIx clock source + @if STM32L4S9xx + * @rmtoll CCIPR2 SAIxSEL LL_RCC_SetSAIClockSource + @else + * @rmtoll CCIPR SAIxSEL LL_RCC_SetSAIClockSource + @endif + * @param SAIxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI1 + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI2 (*) + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI1 (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI2 (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PIN (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t SAIxSource) +{ +#if defined(RCC_CCIPR2_SAI1SEL) + MODIFY_REG(RCC->CCIPR2, (SAIxSource >> 16U), (SAIxSource & 0x0000FFFFU)); +#else + MODIFY_REG(RCC->CCIPR, (SAIxSource & 0xFFFF0000U), (SAIxSource << 16U)); +#endif /* RCC_CCIPR2_SAI1SEL */ +} +#endif /* RCC_CCIPR_SAI1SEL || RCC_CCIPR2_SAI1SEL */ + +#if defined(RCC_CCIPR2_SDMMCSEL) +/** + * @brief Configure SDMMC1 kernel clock source + * @rmtoll CCIPR2 SDMMCSEL LL_RCC_SetSDMMCKernelClockSource + * @param SDMMCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE_48CLK (*) + * @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE_PLLP (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSDMMCKernelClockSource(uint32_t SDMMCxSource) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL, SDMMCxSource); +} +#endif /* RCC_CCIPR2_SDMMCSEL */ + +/** + * @brief Configure SDMMC1 clock source + * @rmtoll CCIPR CLK48SEL LL_RCC_SetSDMMCClockSource + * @param SDMMCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_NONE (*) + * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_HSI48 (*) + * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLLSAI1 (*) + * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLL + * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_MSI (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSDMMCClockSource(uint32_t SDMMCxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, SDMMCxSource); +} + +/** + * @brief Configure RNG clock source + * @rmtoll CCIPR CLK48SEL LL_RCC_SetRNGClockSource + * @param RNGxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_NONE (*) + * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48 (*) + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI1 (*) + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL + * @arg @ref LL_RCC_RNG_CLKSOURCE_MSI + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, RNGxSource); +} + +#if defined(USB_OTG_FS) || defined(USB) +/** + * @brief Configure USB clock source + * @rmtoll CCIPR CLK48SEL LL_RCC_SetUSBClockSource + * @param USBxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_NONE (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI1 (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL + * @arg @ref LL_RCC_USB_CLKSOURCE_MSI + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, USBxSource); +} +#endif /* USB_OTG_FS || USB */ + +#if defined(RCC_CCIPR_ADCSEL) +/** + * @brief Configure ADC clock source + * @rmtoll CCIPR ADCSEL LL_RCC_SetADCClockSource + * @param ADCxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_NONE + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI1 (*) + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI2 (*) + * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, ADCxSource); +} +#endif /* RCC_CCIPR_ADCSEL */ + +#if defined(SWPMI1) +/** + * @brief Configure SWPMI clock source + * @rmtoll CCIPR SWPMI1SEL LL_RCC_SetSWPMIClockSource + * @param SWPMIxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SWPMI1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_SWPMI1_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSWPMIClockSource(uint32_t SWPMIxSource) +{ + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SWPMI1SEL, SWPMIxSource); +} +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Channel0) +#if defined(RCC_CCIPR2_ADFSDM1SEL) +/** + * @brief Configure DFSDM Audio clock source + * @rmtoll CCIPR2 ADFSDM1SEL LL_RCC_SetDFSDMAudioClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1 + * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_HSI + * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_MSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetDFSDMAudioClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_ADFSDM1SEL, Source); +} +#endif /* RCC_CCIPR2_ADFSDM1SEL */ + +/** + * @brief Configure DFSDM Kernel clock source + @if STM32L4S9xx + * @rmtoll CCIPR2 DFSDM1SEL LL_RCC_SetDFSDMClockSource + @else + * @rmtoll CCIPR DFSDM1SEL LL_RCC_SetDFSDMClockSource + @endif + * @param DFSDMxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetDFSDMClockSource(uint32_t DFSDMxSource) +{ +#if defined(RCC_CCIPR2_DFSDM1SEL) + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DFSDM1SEL, DFSDMxSource); +#else + MODIFY_REG(RCC->CCIPR, RCC_CCIPR_DFSDM1SEL, DFSDMxSource); +#endif /* RCC_CCIPR2_DFSDM1SEL */ +} +#endif /* DFSDM1_Channel0 */ + +#if defined(DSI) +/** + * @brief Configure DSI clock source + * @rmtoll CCIPR2 DSISEL LL_RCC_SetDSIClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY + * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetDSIClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DSISEL, Source); +} +#endif /* DSI */ + +#if defined(LTDC) +/** + * @brief Configure LTDC Clock Source + * @rmtoll CCIPR2 PLLSAI2DIVR LL_RCC_SetLTDCClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV2 + * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV4 + * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV8 + * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLTDCClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR, Source); +} +#endif /* LTDC */ + +#if defined(OCTOSPI1) +/** + * @brief Configure OCTOSPI clock source + * @rmtoll CCIPR2 OSPISEL LL_RCC_SetOCTOSPIClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_MSI + * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_PLL + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetOCTOSPIClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_OSPISEL, Source); +} +#endif /* OCTOSPI1 */ + +/** + * @brief Get USARTx clock source + * @rmtoll CCIPR USARTxSEL LL_RCC_GetUSARTClockSource + * @param USARTx This parameter can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE + * @arg @ref LL_RCC_USART2_CLKSOURCE + * @arg @ref LL_RCC_USART3_CLKSOURCE (*) + * + * (*) value not defined in all devices. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, USARTx) | (USARTx << 16U)); +} + +#if defined(UART4) || defined(UART5) +/** + * @brief Get UARTx clock source + * @rmtoll CCIPR UARTxSEL LL_RCC_GetUARTClockSource + * @param UARTx This parameter can be one of the following values: + * @arg @ref LL_RCC_UART4_CLKSOURCE + * @arg @ref LL_RCC_UART5_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_UART4_CLKSOURCE_HSI + * @arg @ref LL_RCC_UART4_CLKSOURCE_LSE + * @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_UART5_CLKSOURCE_HSI + * @arg @ref LL_RCC_UART5_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetUARTClockSource(uint32_t UARTx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, UARTx) | (UARTx << 16U)); +} +#endif /* UART4 || UART5 */ + +/** + * @brief Get LPUARTx clock source + * @rmtoll CCIPR LPUART1SEL LL_RCC_GetLPUARTClockSource + * @param LPUARTx This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPUARTClockSource(uint32_t LPUARTx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, LPUARTx)); +} + +/** + * @brief Get I2Cx clock source + * @rmtoll CCIPR I2CxSEL LL_RCC_GetI2CClockSource + * @param I2Cx This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE + * @arg @ref LL_RCC_I2C2_CLKSOURCE (*) + * @arg @ref LL_RCC_I2C3_CLKSOURCE + * @arg @ref LL_RCC_I2C4_CLKSOURCE (*) + * + * (*) value not defined in all devices. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI (*) + * @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK1 (*) + * @arg @ref LL_RCC_I2C4_CLKSOURCE_SYSCLK (*) + * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx) +{ + __IO const uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0x88U + (I2Cx >> 24U)); + return (uint32_t)((READ_BIT(*reg, 3UL << ((I2Cx & 0x001F0000U) >> 16U)) >> ((I2Cx & 0x001F0000U) >> 16U)) | (I2Cx & 0xFFFF0000U)); +} + +/** + * @brief Get LPTIMx clock source + * @rmtoll CCIPR LPTIMxSEL LL_RCC_GetLPTIMClockSource + * @param LPTIMx This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx) +{ + return (uint32_t)((READ_BIT(RCC->CCIPR, LPTIMx) >> 16U) | LPTIMx); +} + +#if defined(RCC_CCIPR_SAI1SEL) || defined(RCC_CCIPR2_SAI1SEL) +/** + * @brief Get SAIx clock source + @if STM32L4S9xx + * @rmtoll CCIPR2 SAIxSEL LL_RCC_GetSAIClockSource + @else + * @rmtoll CCIPR SAIxSEL LL_RCC_GetSAIClockSource + @endif + * @param SAIx This parameter can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE + * @arg @ref LL_RCC_SAI2_CLKSOURCE (*) + * + * (*) value not defined in all devices. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI1 + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI2 (*) + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI1 (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI2 (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*) + * @arg @ref LL_RCC_SAI2_CLKSOURCE_PIN (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t SAIx) +{ +#if defined(RCC_CCIPR2_SAI1SEL) + return (uint32_t)(READ_BIT(RCC->CCIPR2, SAIx) | (SAIx << 16U)); +#else + return (uint32_t)(READ_BIT(RCC->CCIPR, SAIx) >> 16U | SAIx); +#endif /* RCC_CCIPR2_SAI1SEL */ +} +#endif /* RCC_CCIPR_SAI1SEL || RCC_CCIPR2_SAI1SEL */ + +#if defined(SDMMC1) +#if defined(RCC_CCIPR2_SDMMCSEL) +/** + * @brief Get SDMMCx kernel clock source + * @rmtoll CCIPR2 SDMMCSEL LL_RCC_GetSDMMCKernelClockSource + * @param SDMMCx This parameter can be one of the following values: + * @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE_48CLK (*) + * @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE_PLL (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetSDMMCKernelClockSource(uint32_t SDMMCx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, SDMMCx)); +} +#endif /* RCC_CCIPR2_SDMMCSEL */ + +/** + * @brief Get SDMMCx clock source + * @rmtoll CCIPR CLK48SEL LL_RCC_GetSDMMCClockSource + * @param SDMMCx This parameter can be one of the following values: + * @arg @ref LL_RCC_SDMMC1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_NONE (*) + * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_HSI48 (*) + * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLLSAI1 (*) + * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLL + * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_MSI (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetSDMMCClockSource(uint32_t SDMMCx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, SDMMCx)); +} +#endif /* SDMMC1 */ + +/** + * @brief Get RNGx clock source + * @rmtoll CCIPR CLK48SEL LL_RCC_GetRNGClockSource + * @param RNGx This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_NONE (*) + * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48 (*) + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI1 (*) + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL + * @arg @ref LL_RCC_RNG_CLKSOURCE_MSI + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, RNGx)); +} + +#if defined(USB_OTG_FS) || defined(USB) +/** + * @brief Get USBx clock source + * @rmtoll CCIPR CLK48SEL LL_RCC_GetUSBClockSource + * @param USBx This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_NONE (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI1 (*) + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL + * @arg @ref LL_RCC_USB_CLKSOURCE_MSI + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, USBx)); +} +#endif /* USB_OTG_FS || USB */ + +/** + * @brief Get ADCx clock source + * @rmtoll CCIPR ADCSEL LL_RCC_GetADCClockSource + * @param ADCx This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_NONE + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI1 (*) + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI2 (*) + * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx) +{ +#if defined(RCC_CCIPR_ADCSEL) + return (uint32_t)(READ_BIT(RCC->CCIPR, ADCx)); +#else + (void)ADCx; /* unused */ + return ((READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_ADCEN) != 0U) ? LL_RCC_ADC_CLKSOURCE_SYSCLK : LL_RCC_ADC_CLKSOURCE_NONE); +#endif /* RCC_CCIPR_ADCSEL */ +} + +#if defined(SWPMI1) +/** + * @brief Get SWPMIx clock source + * @rmtoll CCIPR SWPMI1SEL LL_RCC_GetSWPMIClockSource + * @param SPWMIx This parameter can be one of the following values: + * @arg @ref LL_RCC_SWPMI1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SWPMI1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_SWPMI1_CLKSOURCE_HSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetSWPMIClockSource(uint32_t SPWMIx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR, SPWMIx)); +} +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Channel0) +#if defined(RCC_CCIPR2_ADFSDM1SEL) +/** + * @brief Get DFSDM Audio Clock Source + * @rmtoll CCIPR2 ADFSDM1SEL LL_RCC_GetDFSDMAudioClockSource + * @param DFSDMx This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1 + * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_HSI + * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_MSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetDFSDMAudioClockSource(uint32_t DFSDMx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, DFSDMx)); +} +#endif /* RCC_CCIPR2_ADFSDM1SEL */ + +/** + * @brief Get DFSDMx Kernel clock source + @if STM32L4S9xx + * @rmtoll CCIPR2 DFSDM1SEL LL_RCC_GetDFSDMClockSource + @else + * @rmtoll CCIPR DFSDM1SEL LL_RCC_GetDFSDMClockSource + @endif + * @param DFSDMx This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK + */ +__STATIC_INLINE uint32_t LL_RCC_GetDFSDMClockSource(uint32_t DFSDMx) +{ +#if defined(RCC_CCIPR2_DFSDM1SEL) + return (uint32_t)(READ_BIT(RCC->CCIPR2, DFSDMx)); +#else + return (uint32_t)(READ_BIT(RCC->CCIPR, DFSDMx)); +#endif /* RCC_CCIPR2_DFSDM1SEL */ +} +#endif /* DFSDM1_Channel0 */ + +#if defined(DSI) +/** + * @brief Get DSI Clock Source + * @rmtoll CCIPR2 DSISEL LL_RCC_GetDSIClockSource + * @param DSIx This parameter can be one of the following values: + * @arg @ref LL_RCC_DSI_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY + * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetDSIClockSource(uint32_t DSIx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, DSIx)); +} +#endif /* DSI */ + +#if defined(LTDC) +/** + * @brief Get LTDC Clock Source + * @rmtoll CCIPR2 PLLSAI2DIVR LL_RCC_GetLTDCClockSource + * @param LTDCx This parameter can be one of the following values: + * @arg @ref LL_RCC_LTDC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV2 + * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV4 + * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV8 + * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetLTDCClockSource(uint32_t LTDCx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, LTDCx)); +} +#endif /* LTDC */ + +#if defined(OCTOSPI1) +/** + * @brief Get OCTOSPI clock source + * @rmtoll CCIPR2 OSPISEL LL_RCC_GetOCTOSPIClockSource + * @param OCTOSPIx This parameter can be one of the following values: + * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_SYSCLK + * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_MSI + * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_PLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetOCTOSPIClockSource(uint32_t OCTOSPIx) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, OCTOSPIx)); +} +#endif /* OCTOSPI1 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EF_RTC RTC + * @{ + */ + +/** + * @brief Set RTC Clock Source + * @note Once the RTC clock source has been selected, it cannot be changed anymore unless + * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is + * set). The BDRST bit can be used to reset them. + * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); +} + +/** + * @brief Get RTC Clock Source + * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); +} + +/** + * @brief Enable RTC + * @rmtoll BDCR RTCEN LL_RCC_EnableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableRTC(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Disable RTC + * @rmtoll BDCR RTCEN LL_RCC_DisableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableRTC(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Check if RTC has been enabled or not + * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == RCC_BDCR_RTCEN) ? 1UL : 0UL); +} + +/** + * @brief Force the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @brief Release the Backup domain reset + * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @} + */ + + +/** @defgroup RCC_LL_EF_PLL PLL + * @{ + */ + +/** + * @brief Enable PLL + * @rmtoll CR PLLON LL_RCC_PLL_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Disable PLL + * @note Cannot be disabled if the PLL clock is used as the system clock + * @rmtoll CR PLLON LL_RCC_PLL_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLLON); +} + +/** + * @brief Check if PLL Ready + * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLLRDY) == RCC_CR_PLLRDY) ? 1UL : 0UL); +} + +/** + * @brief Configure PLL used for SYSCLK Domain + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLN/PLLR can be written only when PLL is disabled. + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SYS\n + * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SYS + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 (*) + * @arg @ref LL_RCC_PLLM_DIV_10 (*) + * @arg @ref LL_RCC_PLLM_DIV_11 (*) + * @arg @ref LL_RCC_PLLM_DIV_12 (*) + * @arg @ref LL_RCC_PLLM_DIV_13 (*) + * @arg @ref LL_RCC_PLLM_DIV_14 (*) + * @arg @ref LL_RCC_PLLM_DIV_15 (*) + * @arg @ref LL_RCC_PLLM_DIV_16 (*) + * + * (*) value not defined in all devices. + * @param PLLN Between 8 and 86 or 127 depending on devices + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLR); +} + +#if defined(RCC_PLLP_SUPPORT) +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) +/** + * @brief Configure PLL used for SAI domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLN/PLLP can be written only when PLL is disabled. + * @note This can be selected for SAI1 or SAI2 (*) + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SAI\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SAI\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SAI\n + * PLLCFGR PLLPDIV LL_RCC_PLL_ConfigDomain_SAI + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 (*) + * @arg @ref LL_RCC_PLLM_DIV_10 (*) + * @arg @ref LL_RCC_PLLM_DIV_11 (*) + * @arg @ref LL_RCC_PLLM_DIV_12 (*) + * @arg @ref LL_RCC_PLLM_DIV_13 (*) + * @arg @ref LL_RCC_PLLM_DIV_14 (*) + * @arg @ref LL_RCC_PLLM_DIV_15 (*) + * @arg @ref LL_RCC_PLLM_DIV_16 (*) + * + * (*) value not defined in all devices. + * @param PLLN Between 8 and 86 or 127 depending on devices + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + * @retval None + */ +#else +/** + * @brief Configure PLL used for SAI domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLN/PLLP can be written only when PLL is disabled. + * @note This can be selected for SAI1 or SAI2 (*) + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SAI\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SAI\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SAI\n + * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_SAI + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @retval None + */ +#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLPDIV, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLP); +#else + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLP); +#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ +} +#endif /* RCC_PLLP_SUPPORT */ + +/** + * @brief Configure PLL used for 48Mhz domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLN/PLLQ can be written only when PLL is disabled. + * @note This can be selected for USB, RNG, SDMMC + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_48M\n + * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_48M\n + * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_48M\n + * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_48M + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 (*) + * @arg @ref LL_RCC_PLLM_DIV_10 (*) + * @arg @ref LL_RCC_PLLM_DIV_11 (*) + * @arg @ref LL_RCC_PLLM_DIV_12 (*) + * @arg @ref LL_RCC_PLLM_DIV_13 (*) + * @arg @ref LL_RCC_PLLM_DIV_14 (*) + * @arg @ref LL_RCC_PLLM_DIV_15 (*) + * @arg @ref LL_RCC_PLLM_DIV_16 (*) + * + * (*) value not defined in all devices. + * @param PLLN Between 8 and 86 or 127 depending on devices + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ, + Source | PLLM | (PLLN << RCC_PLLCFGR_PLLN_Pos) | PLLQ); +} + +/** + * @brief Configure PLL clock source + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_SetMainSource + * @param PLLSource This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSource); +} + +/** + * @brief Get the oscillator used as PLL clock source. + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC)); +} + +/** + * @brief Get Main PLL multiplication factor for VCO + * @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN + * @retval Between 8 and 86 or 127 depending on devices + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos); +} + +#if defined(RCC_PLLP_SUPPORT) +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) +/** + * @brief Get Main PLL division factor for PLLP + * @note Used for PLLSAI3CLK (SAI1 and SAI2 clock) + * @rmtoll PLLCFGR PLLPDIV LL_RCC_PLL_GetP + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_2 + * @arg @ref LL_RCC_PLLP_DIV_3 + * @arg @ref LL_RCC_PLLP_DIV_4 + * @arg @ref LL_RCC_PLLP_DIV_5 + * @arg @ref LL_RCC_PLLP_DIV_6 + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_8 + * @arg @ref LL_RCC_PLLP_DIV_9 + * @arg @ref LL_RCC_PLLP_DIV_10 + * @arg @ref LL_RCC_PLLP_DIV_11 + * @arg @ref LL_RCC_PLLP_DIV_12 + * @arg @ref LL_RCC_PLLP_DIV_13 + * @arg @ref LL_RCC_PLLP_DIV_14 + * @arg @ref LL_RCC_PLLP_DIV_15 + * @arg @ref LL_RCC_PLLP_DIV_16 + * @arg @ref LL_RCC_PLLP_DIV_17 + * @arg @ref LL_RCC_PLLP_DIV_18 + * @arg @ref LL_RCC_PLLP_DIV_19 + * @arg @ref LL_RCC_PLLP_DIV_20 + * @arg @ref LL_RCC_PLLP_DIV_21 + * @arg @ref LL_RCC_PLLP_DIV_22 + * @arg @ref LL_RCC_PLLP_DIV_23 + * @arg @ref LL_RCC_PLLP_DIV_24 + * @arg @ref LL_RCC_PLLP_DIV_25 + * @arg @ref LL_RCC_PLLP_DIV_26 + * @arg @ref LL_RCC_PLLP_DIV_27 + * @arg @ref LL_RCC_PLLP_DIV_28 + * @arg @ref LL_RCC_PLLP_DIV_29 + * @arg @ref LL_RCC_PLLP_DIV_30 + * @arg @ref LL_RCC_PLLP_DIV_31 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV)); +} +#else +/** + * @brief Get Main PLL division factor for PLLP + * @note Used for PLLSAI3CLK (SAI1 and SAI2 clock) + * @rmtoll PLLCFGR PLLP LL_RCC_PLL_GetP + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLP_DIV_7 + * @arg @ref LL_RCC_PLLP_DIV_17 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP)); +} +#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ +#endif /* RCC_PLLP_SUPPORT */ + +/** + * @brief Get Main PLL division factor for PLLQ + * @note Used for PLL48M1CLK selected for USB, RNG, SDMMC (48 MHz clock) + * @rmtoll PLLCFGR PLLQ LL_RCC_PLL_GetQ + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLQ_DIV_2 + * @arg @ref LL_RCC_PLLQ_DIV_4 + * @arg @ref LL_RCC_PLLQ_DIV_6 + * @arg @ref LL_RCC_PLLQ_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetQ(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ)); +} + +/** + * @brief Get Main PLL division factor for PLLR + * @note Used for PLLCLK (system clock) + * @rmtoll PLLCFGR PLLR LL_RCC_PLL_GetR + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLR_DIV_2 + * @arg @ref LL_RCC_PLLR_DIV_4 + * @arg @ref LL_RCC_PLLR_DIV_6 + * @arg @ref LL_RCC_PLLR_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetR(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR)); +} + +/** + * @brief Get Division factor for the main PLL and other PLL + * @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @arg @ref LL_RCC_PLLM_DIV_9 (*) + * @arg @ref LL_RCC_PLLM_DIV_10 (*) + * @arg @ref LL_RCC_PLLM_DIV_11 (*) + * @arg @ref LL_RCC_PLLM_DIV_12 (*) + * @arg @ref LL_RCC_PLLM_DIV_13 (*) + * @arg @ref LL_RCC_PLLM_DIV_14 (*) + * @arg @ref LL_RCC_PLLM_DIV_15 (*) + * @arg @ref LL_RCC_PLLM_DIV_16 (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM)); +} + +#if defined(RCC_PLLP_SUPPORT) +/** + * @brief Enable PLL output mapped on SAI domain clock + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_EnableDomain_SAI + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_SAI(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +/** + * @brief Disable PLL output mapped on SAI domain clock + * @note Cannot be disabled if the PLL clock is used as the system + * clock + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_DisableDomain_SAI + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_SAI(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN); +} + +/** + * @brief Check if PLL output mapped on SAI domain clock is enabled + * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_IsEnabledDomain_SAI + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_SAI(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN) == (RCC_PLLCFGR_PLLPEN)) ? 1UL : 0UL); +} + +#endif /* RCC_PLLP_SUPPORT */ + +/** + * @brief Enable PLL output mapped on 48MHz domain clock + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_48M + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_48M(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Disable PLL output mapped on 48MHz domain clock + * @note Cannot be disabled if the PLL clock is used as the system + * clock + * @note In order to save power, when the PLLCLK of the PLL is + * not used, should be 0 + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_48M + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_48M(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN); +} + +/** + * @brief Check if PLL output mapped on 48MHz domain clock is enabled + * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_IsEnabledDomain_48M + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_48M(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN) == (RCC_PLLCFGR_PLLQEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable PLL output mapped on SYSCLK domain + * @rmtoll PLLCFGR PLLREN LL_RCC_PLL_EnableDomain_SYS + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_EnableDomain_SYS(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN); +} + +/** + * @brief Disable PLL output mapped on SYSCLK domain + * @note Cannot be disabled if the PLL clock is used as the system + * clock + * @note In order to save power, when the PLLCLK of the PLL is + * not used, Main PLL should be 0 + * @rmtoll PLLCFGR PLLREN LL_RCC_PLL_DisableDomain_SYS + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_DisableDomain_SYS(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN); +} + +/** + * @brief Check if PLL output mapped on SYSCLK domain clock is enabled + * @rmtoll PLLCFGR PLLREN LL_RCC_PLL_IsEnabledDomain_SYS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_SYS(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN) == (RCC_PLLCFGR_PLLREN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(RCC_PLLSAI1_SUPPORT) +/** @defgroup RCC_LL_EF_PLLSAI1 PLLSAI1 + * @{ + */ + +/** + * @brief Enable PLLSAI1 + * @rmtoll CR PLLSAI1ON LL_RCC_PLLSAI1_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLLSAI1ON); +} + +/** + * @brief Disable PLLSAI1 + * @rmtoll CR PLLSAI1ON LL_RCC_PLLSAI1_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI1ON); +} + +/** + * @brief Check if PLLSAI1 Ready + * @rmtoll CR PLLSAI1RDY LL_RCC_PLLSAI1_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == RCC_CR_PLLSAI1RDY) ? 1UL : 0UL); +} + +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) +/** + * @brief Configure PLLSAI1 used for 48Mhz domain clock + * @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLSAI1M/PLLSAI1N/PLLSAI1Q can be written only when PLLSAI1 is disabled. + * @note This can be selected for USB, RNG, SDMMC + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_48M\n + * PLLSAI1CFGR PLLSAI1M LL_RCC_PLLSAI1_ConfigDomain_48M\n + * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_48M\n + * PLLSAI1CFGR PLLSAI1Q LL_RCC_PLLSAI1_ConfigDomain_48M + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1M_DIV_1 + * @arg @ref LL_RCC_PLLSAI1M_DIV_2 + * @arg @ref LL_RCC_PLLSAI1M_DIV_3 + * @arg @ref LL_RCC_PLLSAI1M_DIV_4 + * @arg @ref LL_RCC_PLLSAI1M_DIV_5 + * @arg @ref LL_RCC_PLLSAI1M_DIV_6 + * @arg @ref LL_RCC_PLLSAI1M_DIV_7 + * @arg @ref LL_RCC_PLLSAI1M_DIV_8 + * @arg @ref LL_RCC_PLLSAI1M_DIV_9 + * @arg @ref LL_RCC_PLLSAI1M_DIV_10 + * @arg @ref LL_RCC_PLLSAI1M_DIV_11 + * @arg @ref LL_RCC_PLLSAI1M_DIV_12 + * @arg @ref LL_RCC_PLLSAI1M_DIV_13 + * @arg @ref LL_RCC_PLLSAI1M_DIV_14 + * @arg @ref LL_RCC_PLLSAI1M_DIV_15 + * @arg @ref LL_RCC_PLLSAI1M_DIV_16 + * @param PLLN Between 8 and 86 or 127 depending on devices + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1Q_DIV_2 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_4 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_6 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q, + PLLM | (PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | PLLQ); +} +#else +/** + * @brief Configure PLLSAI1 used for 48Mhz domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLSAI1N/PLLSAI1Q can be written only when PLLSAI1 is disabled. + * @note This can be selected for USB, RNG, SDMMC + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_48M\n + * PLLCFGR PLLM LL_RCC_PLLSAI1_ConfigDomain_48M\n + * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_48M\n + * PLLSAI1CFGR PLLSAI1Q LL_RCC_PLLSAI1_ConfigDomain_48M + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 or 127 depending on devices + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1Q_DIV_2 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_4 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_6 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM); + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q, PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLQ); +} +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) +/** + * @brief Configure PLLSAI1 used for SAI domain clock + * @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLSAI1M/PLLSAI1N/PLLSAI1PDIV can be written only when PLLSAI1 is disabled. + * @note This can be selected for SAI1 or SAI2 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_SAI\n + * PLLSAI1CFGR PLLSAI1M LL_RCC_PLLSAI1_ConfigDomain_SAI\n + * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_SAI\n + * PLLSAI1CFGR PLLSAI1PDIV LL_RCC_PLLSAI1_ConfigDomain_SAI + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1M_DIV_1 + * @arg @ref LL_RCC_PLLSAI1M_DIV_2 + * @arg @ref LL_RCC_PLLSAI1M_DIV_3 + * @arg @ref LL_RCC_PLLSAI1M_DIV_4 + * @arg @ref LL_RCC_PLLSAI1M_DIV_5 + * @arg @ref LL_RCC_PLLSAI1M_DIV_6 + * @arg @ref LL_RCC_PLLSAI1M_DIV_7 + * @arg @ref LL_RCC_PLLSAI1M_DIV_8 + * @arg @ref LL_RCC_PLLSAI1M_DIV_9 + * @arg @ref LL_RCC_PLLSAI1M_DIV_10 + * @arg @ref LL_RCC_PLLSAI1M_DIV_11 + * @arg @ref LL_RCC_PLLSAI1M_DIV_12 + * @arg @ref LL_RCC_PLLSAI1M_DIV_13 + * @arg @ref LL_RCC_PLLSAI1M_DIV_14 + * @arg @ref LL_RCC_PLLSAI1M_DIV_15 + * @arg @ref LL_RCC_PLLSAI1M_DIV_16 + * @param PLLN Between 8 and 86 or 127 depending on devices + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1P_DIV_2 + * @arg @ref LL_RCC_PLLSAI1P_DIV_3 + * @arg @ref LL_RCC_PLLSAI1P_DIV_4 + * @arg @ref LL_RCC_PLLSAI1P_DIV_5 + * @arg @ref LL_RCC_PLLSAI1P_DIV_6 + * @arg @ref LL_RCC_PLLSAI1P_DIV_7 + * @arg @ref LL_RCC_PLLSAI1P_DIV_8 + * @arg @ref LL_RCC_PLLSAI1P_DIV_9 + * @arg @ref LL_RCC_PLLSAI1P_DIV_10 + * @arg @ref LL_RCC_PLLSAI1P_DIV_11 + * @arg @ref LL_RCC_PLLSAI1P_DIV_12 + * @arg @ref LL_RCC_PLLSAI1P_DIV_13 + * @arg @ref LL_RCC_PLLSAI1P_DIV_14 + * @arg @ref LL_RCC_PLLSAI1P_DIV_15 + * @arg @ref LL_RCC_PLLSAI1P_DIV_16 + * @arg @ref LL_RCC_PLLSAI1P_DIV_17 + * @arg @ref LL_RCC_PLLSAI1P_DIV_18 + * @arg @ref LL_RCC_PLLSAI1P_DIV_19 + * @arg @ref LL_RCC_PLLSAI1P_DIV_20 + * @arg @ref LL_RCC_PLLSAI1P_DIV_21 + * @arg @ref LL_RCC_PLLSAI1P_DIV_22 + * @arg @ref LL_RCC_PLLSAI1P_DIV_23 + * @arg @ref LL_RCC_PLLSAI1P_DIV_24 + * @arg @ref LL_RCC_PLLSAI1P_DIV_25 + * @arg @ref LL_RCC_PLLSAI1P_DIV_26 + * @arg @ref LL_RCC_PLLSAI1P_DIV_27 + * @arg @ref LL_RCC_PLLSAI1P_DIV_28 + * @arg @ref LL_RCC_PLLSAI1P_DIV_29 + * @arg @ref LL_RCC_PLLSAI1P_DIV_30 + * @arg @ref LL_RCC_PLLSAI1P_DIV_31 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV, + PLLM | (PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | PLLP); +} +#elif defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) +/** + * @brief Configure PLLSAI1 used for SAI domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLSAI1N/PLLSAI1PDIV can be written only when PLLSAI1 is disabled. + * @note This can be selected for SAI1 or SAI2 (*) + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_SAI\n + * PLLCFGR PLLM LL_RCC_PLLSAI1_ConfigDomain_SAI\n + * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_SAI\n + * PLLSAI1CFGR PLLSAI1PDIV LL_RCC_PLLSAI1_ConfigDomain_SAI + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 or 127 depending on devices + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1P_DIV_2 + * @arg @ref LL_RCC_PLLSAI1P_DIV_3 + * @arg @ref LL_RCC_PLLSAI1P_DIV_4 + * @arg @ref LL_RCC_PLLSAI1P_DIV_5 + * @arg @ref LL_RCC_PLLSAI1P_DIV_6 + * @arg @ref LL_RCC_PLLSAI1P_DIV_7 + * @arg @ref LL_RCC_PLLSAI1P_DIV_8 + * @arg @ref LL_RCC_PLLSAI1P_DIV_9 + * @arg @ref LL_RCC_PLLSAI1P_DIV_10 + * @arg @ref LL_RCC_PLLSAI1P_DIV_11 + * @arg @ref LL_RCC_PLLSAI1P_DIV_12 + * @arg @ref LL_RCC_PLLSAI1P_DIV_13 + * @arg @ref LL_RCC_PLLSAI1P_DIV_14 + * @arg @ref LL_RCC_PLLSAI1P_DIV_15 + * @arg @ref LL_RCC_PLLSAI1P_DIV_16 + * @arg @ref LL_RCC_PLLSAI1P_DIV_17 + * @arg @ref LL_RCC_PLLSAI1P_DIV_18 + * @arg @ref LL_RCC_PLLSAI1P_DIV_19 + * @arg @ref LL_RCC_PLLSAI1P_DIV_20 + * @arg @ref LL_RCC_PLLSAI1P_DIV_21 + * @arg @ref LL_RCC_PLLSAI1P_DIV_22 + * @arg @ref LL_RCC_PLLSAI1P_DIV_23 + * @arg @ref LL_RCC_PLLSAI1P_DIV_24 + * @arg @ref LL_RCC_PLLSAI1P_DIV_25 + * @arg @ref LL_RCC_PLLSAI1P_DIV_26 + * @arg @ref LL_RCC_PLLSAI1P_DIV_27 + * @arg @ref LL_RCC_PLLSAI1P_DIV_28 + * @arg @ref LL_RCC_PLLSAI1P_DIV_29 + * @arg @ref LL_RCC_PLLSAI1P_DIV_30 + * @arg @ref LL_RCC_PLLSAI1P_DIV_31 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM); + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV, + PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLP); +} +#else +/** + * @brief Configure PLLSAI1 used for SAI domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLSAI1N/PLLSAI1P can be written only when PLLSAI1 is disabled. + * @note This can be selected for SAI1 or SAI2 (*) + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_SAI\n + * PLLCFGR PLLM LL_RCC_PLLSAI1_ConfigDomain_SAI\n + * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_SAI\n + * PLLSAI1CFGR PLLSAI1P LL_RCC_PLLSAI1_ConfigDomain_SAI + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1P_DIV_7 + * @arg @ref LL_RCC_PLLSAI1P_DIV_17 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM); + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P, PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLP); +} +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT && RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) +/** + * @brief Configure PLLSAI1 used for ADC domain clock + * @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLSAI1M/PLLSAI1N/PLLSAI1R can be written only when PLLSAI1 is disabled. + * @note This can be selected for ADC + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_ADC\n + * PLLSAI1CFGR PLLSAI1M LL_RCC_PLLSAI1_ConfigDomain_ADC\n + * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_ADC\n + * PLLSAI1CFGR PLLSAI1R LL_RCC_PLLSAI1_ConfigDomain_ADC + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1M_DIV_1 + * @arg @ref LL_RCC_PLLSAI1M_DIV_2 + * @arg @ref LL_RCC_PLLSAI1M_DIV_3 + * @arg @ref LL_RCC_PLLSAI1M_DIV_4 + * @arg @ref LL_RCC_PLLSAI1M_DIV_5 + * @arg @ref LL_RCC_PLLSAI1M_DIV_6 + * @arg @ref LL_RCC_PLLSAI1M_DIV_7 + * @arg @ref LL_RCC_PLLSAI1M_DIV_8 + * @arg @ref LL_RCC_PLLSAI1M_DIV_9 + * @arg @ref LL_RCC_PLLSAI1M_DIV_10 + * @arg @ref LL_RCC_PLLSAI1M_DIV_11 + * @arg @ref LL_RCC_PLLSAI1M_DIV_12 + * @arg @ref LL_RCC_PLLSAI1M_DIV_13 + * @arg @ref LL_RCC_PLLSAI1M_DIV_14 + * @arg @ref LL_RCC_PLLSAI1M_DIV_15 + * @arg @ref LL_RCC_PLLSAI1M_DIV_16 + * @param PLLN Between 8 and 86 or 127 depending on devices + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1R_DIV_2 + * @arg @ref LL_RCC_PLLSAI1R_DIV_4 + * @arg @ref LL_RCC_PLLSAI1R_DIV_6 + * @arg @ref LL_RCC_PLLSAI1R_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R, + PLLM | (PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | PLLR); +} +#else +/** + * @brief Configure PLLSAI1 used for ADC domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLN/PLLR can be written only when PLLSAI1 is disabled. + * @note This can be selected for ADC + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_ADC\n + * PLLCFGR PLLM LL_RCC_PLLSAI1_ConfigDomain_ADC\n + * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_ADC\n + * PLLSAI1CFGR PLLSAI1R LL_RCC_PLLSAI1_ConfigDomain_ADC + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 or 127 depending on devices + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1R_DIV_2 + * @arg @ref LL_RCC_PLLSAI1R_DIV_4 + * @arg @ref LL_RCC_PLLSAI1R_DIV_6 + * @arg @ref LL_RCC_PLLSAI1R_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM); + MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R, PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLR); +} +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + +/** + * @brief Get SAI1PLL multiplication factor for VCO + * @rmtoll PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_GetN + * @retval Between 8 and 86 or 127 depending on devices + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos); +} + +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) +/** + * @brief Get SAI1PLL division factor for PLLSAI1P + * @note Used for PLLSAI1CLK (SAI1 or SAI2 (*) clock). + * @rmtoll PLLSAI1CFGR PLLSAI1PDIV LL_RCC_PLLSAI1_GetP + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1P_DIV_2 + * @arg @ref LL_RCC_PLLSAI1P_DIV_3 + * @arg @ref LL_RCC_PLLSAI1P_DIV_4 + * @arg @ref LL_RCC_PLLSAI1P_DIV_5 + * @arg @ref LL_RCC_PLLSAI1P_DIV_6 + * @arg @ref LL_RCC_PLLSAI1P_DIV_7 + * @arg @ref LL_RCC_PLLSAI1P_DIV_8 + * @arg @ref LL_RCC_PLLSAI1P_DIV_9 + * @arg @ref LL_RCC_PLLSAI1P_DIV_10 + * @arg @ref LL_RCC_PLLSAI1P_DIV_11 + * @arg @ref LL_RCC_PLLSAI1P_DIV_12 + * @arg @ref LL_RCC_PLLSAI1P_DIV_13 + * @arg @ref LL_RCC_PLLSAI1P_DIV_14 + * @arg @ref LL_RCC_PLLSAI1P_DIV_15 + * @arg @ref LL_RCC_PLLSAI1P_DIV_16 + * @arg @ref LL_RCC_PLLSAI1P_DIV_17 + * @arg @ref LL_RCC_PLLSAI1P_DIV_18 + * @arg @ref LL_RCC_PLLSAI1P_DIV_19 + * @arg @ref LL_RCC_PLLSAI1P_DIV_20 + * @arg @ref LL_RCC_PLLSAI1P_DIV_21 + * @arg @ref LL_RCC_PLLSAI1P_DIV_22 + * @arg @ref LL_RCC_PLLSAI1P_DIV_23 + * @arg @ref LL_RCC_PLLSAI1P_DIV_24 + * @arg @ref LL_RCC_PLLSAI1P_DIV_25 + * @arg @ref LL_RCC_PLLSAI1P_DIV_26 + * @arg @ref LL_RCC_PLLSAI1P_DIV_27 + * @arg @ref LL_RCC_PLLSAI1P_DIV_28 + * @arg @ref LL_RCC_PLLSAI1P_DIV_29 + * @arg @ref LL_RCC_PLLSAI1P_DIV_30 + * @arg @ref LL_RCC_PLLSAI1P_DIV_31 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetP(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV)); +} +#else +/** + * @brief Get SAI1PLL division factor for PLLSAI1P + * @note Used for PLLSAI1CLK (SAI1 or SAI2 (*) clock). + * @rmtoll PLLSAI1CFGR PLLSAI1P LL_RCC_PLLSAI1_GetP + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1P_DIV_7 + * @arg @ref LL_RCC_PLLSAI1P_DIV_17 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetP(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P)); +} +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +/** + * @brief Get SAI1PLL division factor for PLLSAI1Q + * @note Used PLL48M2CLK selected for USB, RNG, SDMMC (48 MHz clock) + * @rmtoll PLLSAI1CFGR PLLSAI1Q LL_RCC_PLLSAI1_GetQ + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1Q_DIV_2 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_4 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_6 + * @arg @ref LL_RCC_PLLSAI1Q_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetQ(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q)); +} + +/** + * @brief Get PLLSAI1 division factor for PLLSAIR + * @note Used for PLLADC1CLK (ADC clock) + * @rmtoll PLLSAI1CFGR PLLSAI1R LL_RCC_PLLSAI1_GetR + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1R_DIV_2 + * @arg @ref LL_RCC_PLLSAI1R_DIV_4 + * @arg @ref LL_RCC_PLLSAI1R_DIV_6 + * @arg @ref LL_RCC_PLLSAI1R_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetR(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R)); +} + +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) +/** + * @brief Get Division factor for the PLLSAI1 + * @rmtoll PLLSAI1CFGR PLLSAI1M LL_RCC_PLLSAI1_GetDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAI1M_DIV_1 + * @arg @ref LL_RCC_PLLSAI1M_DIV_2 + * @arg @ref LL_RCC_PLLSAI1M_DIV_3 + * @arg @ref LL_RCC_PLLSAI1M_DIV_4 + * @arg @ref LL_RCC_PLLSAI1M_DIV_5 + * @arg @ref LL_RCC_PLLSAI1M_DIV_6 + * @arg @ref LL_RCC_PLLSAI1M_DIV_7 + * @arg @ref LL_RCC_PLLSAI1M_DIV_8 + * @arg @ref LL_RCC_PLLSAI1M_DIV_9 + * @arg @ref LL_RCC_PLLSAI1M_DIV_10 + * @arg @ref LL_RCC_PLLSAI1M_DIV_11 + * @arg @ref LL_RCC_PLLSAI1M_DIV_12 + * @arg @ref LL_RCC_PLLSAI1M_DIV_13 + * @arg @ref LL_RCC_PLLSAI1M_DIV_14 + * @arg @ref LL_RCC_PLLSAI1M_DIV_15 + * @arg @ref LL_RCC_PLLSAI1M_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetDivider(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M)); +} +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + +/** + * @brief Enable PLLSAI1 output mapped on SAI domain clock + * @rmtoll PLLSAI1CFGR PLLSAI1PEN LL_RCC_PLLSAI1_EnableDomain_SAI + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_EnableDomain_SAI(void) +{ + SET_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PEN); +} + +/** + * @brief Disable PLLSAI1 output mapped on SAI domain clock + * @note In order to save power, when of the PLLSAI1 is + * not used, should be 0 + * @rmtoll PLLSAI1CFGR PLLSAI1PEN LL_RCC_PLLSAI1_DisableDomain_SAI + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_DisableDomain_SAI(void) +{ + CLEAR_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PEN); +} + +/** + * @brief Check if PLLSAI1 output mapped on SAI domain clock is enabled + * @rmtoll PLLSAI1CFGR PLLSAI1PEN LL_RCC_PLLSAI1_IsEnabledDomain_SAI + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_IsEnabledDomain_SAI(void) +{ + return ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PEN) == (RCC_PLLSAI1CFGR_PLLSAI1PEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable PLLSAI1 output mapped on 48MHz domain clock + * @rmtoll PLLSAI1CFGR PLLSAI1QEN LL_RCC_PLLSAI1_EnableDomain_48M + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_EnableDomain_48M(void) +{ + SET_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN); +} + +/** + * @brief Disable PLLSAI1 output mapped on 48MHz domain clock + * @note In order to save power, when of the PLLSAI1 is + * not used, should be 0 + * @rmtoll PLLSAI1CFGR PLLSAI1QEN LL_RCC_PLLSAI1_DisableDomain_48M + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_DisableDomain_48M(void) +{ + CLEAR_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN); +} + +/** + * @brief Check if PLLSAI1 output mapped on SAI domain clock is enabled + * @rmtoll PLLSAI1CFGR PLLSAI1QEN LL_RCC_PLLSAI1_IsEnabledDomain_48M + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_IsEnabledDomain_48M(void) +{ + return ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN) == (RCC_PLLSAI1CFGR_PLLSAI1QEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable PLLSAI1 output mapped on ADC domain clock + * @rmtoll PLLSAI1CFGR PLLSAI1REN LL_RCC_PLLSAI1_EnableDomain_ADC + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_EnableDomain_ADC(void) +{ + SET_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1REN); +} + +/** + * @brief Disable PLLSAI1 output mapped on ADC domain clock + * @note In order to save power, when of the PLLSAI1 is + * not used, Main PLLSAI1 should be 0 + * @rmtoll PLLSAI1CFGR PLLSAI1REN LL_RCC_PLLSAI1_DisableDomain_ADC + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI1_DisableDomain_ADC(void) +{ + CLEAR_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1REN); +} + +/** + * @brief Check if PLLSAI1 output mapped on ADC domain clock is enabled + * @rmtoll PLLSAI1CFGR PLLSAI1REN LL_RCC_PLLSAI1_IsEnabledDomain_ADC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_IsEnabledDomain_ADC(void) +{ + return ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1REN) == (RCC_PLLSAI1CFGR_PLLSAI1REN)) ? 1UL : 0UL); +} + +/** + * @} + */ +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) +/** @defgroup RCC_LL_EF_PLLSAI2 PLLSAI2 + * @{ + */ + +/** + * @brief Enable PLLSAI2 + * @rmtoll CR PLLSAI2ON LL_RCC_PLLSAI2_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLLSAI2ON); +} + +/** + * @brief Disable PLLSAI2 + * @rmtoll CR PLLSAI2ON LL_RCC_PLLSAI2_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI2ON); +} + +/** + * @brief Check if PLLSAI2 Ready + * @rmtoll CR PLLSAI2RDY LL_RCC_PLLSAI2_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == RCC_CR_PLLSAI2RDY) ? 1UL : 0UL); +} + +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) +/** + * @brief Configure PLLSAI2 used for SAI domain clock + * @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLSAI2M/PLLSAI2N/PLLSAI2PDIV can be written only when PLLSAI2 is disabled. + * @note This can be selected for SAI1 or SAI2 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_SAI\n + * PLLSAI2CFGR PLLSAI2M LL_RCC_PLLSAI2_ConfigDomain_SAI\n + * PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_SAI\n + * PLLSAI2CFGR PLLSAI2PDIV LL_RCC_PLLSAI2_ConfigDomain_SAI + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2M_DIV_1 + * @arg @ref LL_RCC_PLLSAI2M_DIV_2 + * @arg @ref LL_RCC_PLLSAI2M_DIV_3 + * @arg @ref LL_RCC_PLLSAI2M_DIV_4 + * @arg @ref LL_RCC_PLLSAI2M_DIV_5 + * @arg @ref LL_RCC_PLLSAI2M_DIV_6 + * @arg @ref LL_RCC_PLLSAI2M_DIV_7 + * @arg @ref LL_RCC_PLLSAI2M_DIV_8 + * @arg @ref LL_RCC_PLLSAI2M_DIV_9 + * @arg @ref LL_RCC_PLLSAI2M_DIV_10 + * @arg @ref LL_RCC_PLLSAI2M_DIV_11 + * @arg @ref LL_RCC_PLLSAI2M_DIV_12 + * @arg @ref LL_RCC_PLLSAI2M_DIV_13 + * @arg @ref LL_RCC_PLLSAI2M_DIV_14 + * @arg @ref LL_RCC_PLLSAI2M_DIV_15 + * @arg @ref LL_RCC_PLLSAI2M_DIV_16 + * @param PLLN Between 8 and 86 or 127 depending on devices + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2P_DIV_2 + * @arg @ref LL_RCC_PLLSAI2P_DIV_3 + * @arg @ref LL_RCC_PLLSAI2P_DIV_4 + * @arg @ref LL_RCC_PLLSAI2P_DIV_5 + * @arg @ref LL_RCC_PLLSAI2P_DIV_6 + * @arg @ref LL_RCC_PLLSAI2P_DIV_7 + * @arg @ref LL_RCC_PLLSAI2P_DIV_8 + * @arg @ref LL_RCC_PLLSAI2P_DIV_9 + * @arg @ref LL_RCC_PLLSAI2P_DIV_10 + * @arg @ref LL_RCC_PLLSAI2P_DIV_11 + * @arg @ref LL_RCC_PLLSAI2P_DIV_12 + * @arg @ref LL_RCC_PLLSAI2P_DIV_13 + * @arg @ref LL_RCC_PLLSAI2P_DIV_14 + * @arg @ref LL_RCC_PLLSAI2P_DIV_15 + * @arg @ref LL_RCC_PLLSAI2P_DIV_16 + * @arg @ref LL_RCC_PLLSAI2P_DIV_17 + * @arg @ref LL_RCC_PLLSAI2P_DIV_18 + * @arg @ref LL_RCC_PLLSAI2P_DIV_19 + * @arg @ref LL_RCC_PLLSAI2P_DIV_20 + * @arg @ref LL_RCC_PLLSAI2P_DIV_21 + * @arg @ref LL_RCC_PLLSAI2P_DIV_22 + * @arg @ref LL_RCC_PLLSAI2P_DIV_23 + * @arg @ref LL_RCC_PLLSAI2P_DIV_24 + * @arg @ref LL_RCC_PLLSAI2P_DIV_25 + * @arg @ref LL_RCC_PLLSAI2P_DIV_26 + * @arg @ref LL_RCC_PLLSAI2P_DIV_27 + * @arg @ref LL_RCC_PLLSAI2P_DIV_28 + * @arg @ref LL_RCC_PLLSAI2P_DIV_29 + * @arg @ref LL_RCC_PLLSAI2P_DIV_30 + * @arg @ref LL_RCC_PLLSAI2P_DIV_31 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV, + PLLM | (PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | PLLP); +} +#elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) +/** + * @brief Configure PLLSAI2 used for SAI domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLSAI1 and PLLSAI2 are disabled. + * @note PLLSAI2N/PLLSAI2PDIV can be written only when PLLSAI2 is disabled. + * @note This can be selected for SAI1 or SAI2 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_SAI\n + * PLLCFGR PLLM LL_RCC_PLLSAI2_ConfigDomain_SAI\n + * PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_SAI\n + * PLLSAI2CFGR PLLSAI2PDIV LL_RCC_PLLSAI2_ConfigDomain_SAI + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 or 127 depending on devices + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2P_DIV_2 + * @arg @ref LL_RCC_PLLSAI2P_DIV_3 + * @arg @ref LL_RCC_PLLSAI2P_DIV_4 + * @arg @ref LL_RCC_PLLSAI2P_DIV_5 + * @arg @ref LL_RCC_PLLSAI2P_DIV_6 + * @arg @ref LL_RCC_PLLSAI2P_DIV_7 + * @arg @ref LL_RCC_PLLSAI2P_DIV_8 + * @arg @ref LL_RCC_PLLSAI2P_DIV_9 + * @arg @ref LL_RCC_PLLSAI2P_DIV_10 + * @arg @ref LL_RCC_PLLSAI2P_DIV_11 + * @arg @ref LL_RCC_PLLSAI2P_DIV_12 + * @arg @ref LL_RCC_PLLSAI2P_DIV_13 + * @arg @ref LL_RCC_PLLSAI2P_DIV_14 + * @arg @ref LL_RCC_PLLSAI2P_DIV_15 + * @arg @ref LL_RCC_PLLSAI2P_DIV_16 + * @arg @ref LL_RCC_PLLSAI2P_DIV_17 + * @arg @ref LL_RCC_PLLSAI2P_DIV_18 + * @arg @ref LL_RCC_PLLSAI2P_DIV_19 + * @arg @ref LL_RCC_PLLSAI2P_DIV_20 + * @arg @ref LL_RCC_PLLSAI2P_DIV_21 + * @arg @ref LL_RCC_PLLSAI2P_DIV_22 + * @arg @ref LL_RCC_PLLSAI2P_DIV_23 + * @arg @ref LL_RCC_PLLSAI2P_DIV_24 + * @arg @ref LL_RCC_PLLSAI2P_DIV_25 + * @arg @ref LL_RCC_PLLSAI2P_DIV_26 + * @arg @ref LL_RCC_PLLSAI2P_DIV_27 + * @arg @ref LL_RCC_PLLSAI2P_DIV_28 + * @arg @ref LL_RCC_PLLSAI2P_DIV_29 + * @arg @ref LL_RCC_PLLSAI2P_DIV_30 + * @arg @ref LL_RCC_PLLSAI2P_DIV_31 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM); + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV, PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLP); +} +#else +/** + * @brief Configure PLLSAI2 used for SAI domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLSAI2 and PLLSAI2 are disabled. + * @note PLLSAI2N/PLLSAI2P can be written only when PLLSAI2 is disabled. + * @note This can be selected for SAI1 or SAI2 + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_SAI\n + * PLLCFGR PLLM LL_RCC_PLLSAI2_ConfigDomain_SAI\n + * PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_SAI\n + * PLLSAI2CFGR PLLSAI2P LL_RCC_PLLSAI2_ConfigDomain_SAI + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLP This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2P_DIV_7 + * @arg @ref LL_RCC_PLLSAI2P_DIV_17 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM); + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P, PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLP); +} +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT && RCC_PLLSAI2P_DIV_2_31_SUPPORT */ + +#if defined(DSI) +/** + * @brief Configure PLLSAI2 used for DSI domain clock + * @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLSAI2M/PLLSAI2N/PLLSAI2Q can be written only when PLLSAI2 is disabled. + * @note This can be selected for DSI + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_DSI\n + * PLLSAI2CFGR PLLSAI2M LL_RCC_PLLSAI2_ConfigDomain_DSI\n + * PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_DSI\n + * PLLSAI2CFGR PLLSAI2Q LL_RCC_PLLSAI2_ConfigDomain_DSI + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2M_DIV_1 + * @arg @ref LL_RCC_PLLSAI2M_DIV_2 + * @arg @ref LL_RCC_PLLSAI2M_DIV_3 + * @arg @ref LL_RCC_PLLSAI2M_DIV_4 + * @arg @ref LL_RCC_PLLSAI2M_DIV_5 + * @arg @ref LL_RCC_PLLSAI2M_DIV_6 + * @arg @ref LL_RCC_PLLSAI2M_DIV_7 + * @arg @ref LL_RCC_PLLSAI2M_DIV_8 + * @arg @ref LL_RCC_PLLSAI2M_DIV_9 + * @arg @ref LL_RCC_PLLSAI2M_DIV_10 + * @arg @ref LL_RCC_PLLSAI2M_DIV_11 + * @arg @ref LL_RCC_PLLSAI2M_DIV_12 + * @arg @ref LL_RCC_PLLSAI2M_DIV_13 + * @arg @ref LL_RCC_PLLSAI2M_DIV_14 + * @arg @ref LL_RCC_PLLSAI2M_DIV_15 + * @arg @ref LL_RCC_PLLSAI2M_DIV_16 + * @param PLLN Between 8 and 127 + * @param PLLQ This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2Q_DIV_2 + * @arg @ref LL_RCC_PLLSAI2Q_DIV_4 + * @arg @ref LL_RCC_PLLSAI2Q_DIV_6 + * @arg @ref LL_RCC_PLLSAI2Q_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_DSI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2Q, + (PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | PLLQ | PLLM); +} +#endif /* DSI */ + +#if defined(LTDC) +/** + * @brief Configure PLLSAI2 used for LTDC domain clock + * @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled. + * @note PLLSAI2M/PLLSAI2N/PLLSAI2R can be written only when PLLSAI2 is disabled. + * @note This can be selected for LTDC + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_LTDC\n + * PLLSAI2CFGR PLLSAI2M LL_RCC_PLLSAI2_ConfigDomain_LTDC\n + * PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_LTDC\n + * PLLSAI2CFGR PLLSAI2R LL_RCC_PLLSAI2_ConfigDomain_LTDC\n + * CCIPR2 PLLSAI2DIVR LL_RCC_PLLSAI2_ConfigDomain_LTDC + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2M_DIV_1 + * @arg @ref LL_RCC_PLLSAI2M_DIV_2 + * @arg @ref LL_RCC_PLLSAI2M_DIV_3 + * @arg @ref LL_RCC_PLLSAI2M_DIV_4 + * @arg @ref LL_RCC_PLLSAI2M_DIV_5 + * @arg @ref LL_RCC_PLLSAI2M_DIV_6 + * @arg @ref LL_RCC_PLLSAI2M_DIV_7 + * @arg @ref LL_RCC_PLLSAI2M_DIV_8 + * @arg @ref LL_RCC_PLLSAI2M_DIV_9 + * @arg @ref LL_RCC_PLLSAI2M_DIV_10 + * @arg @ref LL_RCC_PLLSAI2M_DIV_11 + * @arg @ref LL_RCC_PLLSAI2M_DIV_12 + * @arg @ref LL_RCC_PLLSAI2M_DIV_13 + * @arg @ref LL_RCC_PLLSAI2M_DIV_14 + * @arg @ref LL_RCC_PLLSAI2M_DIV_15 + * @arg @ref LL_RCC_PLLSAI2M_DIV_16 + * @param PLLN Between 8 and 127 + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2R_DIV_2 + * @arg @ref LL_RCC_PLLSAI2R_DIV_4 + * @arg @ref LL_RCC_PLLSAI2R_DIV_6 + * @arg @ref LL_RCC_PLLSAI2R_DIV_8 + * @param PLLDIVR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_2 + * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_4 + * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_8 + * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_LTDC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR, uint32_t PLLDIVR) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source); + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R, + (PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | PLLR | PLLM); + MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR, PLLDIVR); +} +#else +/** + * @brief Configure PLLSAI2 used for ADC domain clock + * @note PLL Source and PLLM Divider can be written only when PLL, + * PLLSAI2 and PLLSAI2 are disabled. + * @note PLLSAI2N/PLLSAI2R can be written only when PLLSAI2 is disabled. + * @note This can be selected for ADC + * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_ADC\n + * PLLCFGR PLLM LL_RCC_PLLSAI2_ConfigDomain_ADC\n + * PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_ADC\n + * PLLSAI2CFGR PLLSAI2R LL_RCC_PLLSAI2_ConfigDomain_ADC + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @arg @ref LL_RCC_PLLSOURCE_MSI + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @param PLLM This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLM_DIV_1 + * @arg @ref LL_RCC_PLLM_DIV_2 + * @arg @ref LL_RCC_PLLM_DIV_3 + * @arg @ref LL_RCC_PLLM_DIV_4 + * @arg @ref LL_RCC_PLLM_DIV_5 + * @arg @ref LL_RCC_PLLM_DIV_6 + * @arg @ref LL_RCC_PLLM_DIV_7 + * @arg @ref LL_RCC_PLLM_DIV_8 + * @param PLLN Between 8 and 86 + * @param PLLR This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2R_DIV_2 + * @arg @ref LL_RCC_PLLSAI2R_DIV_4 + * @arg @ref LL_RCC_PLLSAI2R_DIV_6 + * @arg @ref LL_RCC_PLLSAI2R_DIV_8 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM); + MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R, PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLR); +} +#endif /* LTDC */ + +/** + * @brief Get SAI2PLL multiplication factor for VCO + * @rmtoll PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_GetN + * @retval Between 8 and 86 or 127 depending on devices + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos); +} + +#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) +/** + * @brief Get SAI2PLL division factor for PLLSAI2P + * @note Used for PLLSAI2CLK (SAI1 or SAI2 clock). + * @rmtoll PLLSAI2CFGR PLLSAI2PDIV LL_RCC_PLLSAI2_GetP + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2P_DIV_2 + * @arg @ref LL_RCC_PLLSAI2P_DIV_3 + * @arg @ref LL_RCC_PLLSAI2P_DIV_4 + * @arg @ref LL_RCC_PLLSAI2P_DIV_5 + * @arg @ref LL_RCC_PLLSAI2P_DIV_6 + * @arg @ref LL_RCC_PLLSAI2P_DIV_7 + * @arg @ref LL_RCC_PLLSAI2P_DIV_8 + * @arg @ref LL_RCC_PLLSAI2P_DIV_9 + * @arg @ref LL_RCC_PLLSAI2P_DIV_10 + * @arg @ref LL_RCC_PLLSAI2P_DIV_11 + * @arg @ref LL_RCC_PLLSAI2P_DIV_12 + * @arg @ref LL_RCC_PLLSAI2P_DIV_13 + * @arg @ref LL_RCC_PLLSAI2P_DIV_14 + * @arg @ref LL_RCC_PLLSAI2P_DIV_15 + * @arg @ref LL_RCC_PLLSAI2P_DIV_16 + * @arg @ref LL_RCC_PLLSAI2P_DIV_17 + * @arg @ref LL_RCC_PLLSAI2P_DIV_18 + * @arg @ref LL_RCC_PLLSAI2P_DIV_19 + * @arg @ref LL_RCC_PLLSAI2P_DIV_20 + * @arg @ref LL_RCC_PLLSAI2P_DIV_21 + * @arg @ref LL_RCC_PLLSAI2P_DIV_22 + * @arg @ref LL_RCC_PLLSAI2P_DIV_23 + * @arg @ref LL_RCC_PLLSAI2P_DIV_24 + * @arg @ref LL_RCC_PLLSAI2P_DIV_25 + * @arg @ref LL_RCC_PLLSAI2P_DIV_26 + * @arg @ref LL_RCC_PLLSAI2P_DIV_27 + * @arg @ref LL_RCC_PLLSAI2P_DIV_28 + * @arg @ref LL_RCC_PLLSAI2P_DIV_29 + * @arg @ref LL_RCC_PLLSAI2P_DIV_30 + * @arg @ref LL_RCC_PLLSAI2P_DIV_31 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetP(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PDIV)); +} +#else +/** + * @brief Get SAI2PLL division factor for PLLSAI2P + * @note Used for PLLSAI2CLK (SAI1 or SAI2 clock). + * @rmtoll PLLSAI2CFGR PLLSAI2P LL_RCC_PLLSAI2_GetP + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2P_DIV_7 + * @arg @ref LL_RCC_PLLSAI2P_DIV_17 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetP(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P)); +} +#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ + +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) +/** + * @brief Get division factor for PLLSAI2Q + * @note Used for PLLDSICLK (DSI clock) + * @rmtoll PLLSAI2CFGR PLLSAI2Q LL_RCC_PLLSAI2_GetQ + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2Q_DIV_2 + * @arg @ref LL_RCC_PLLSAI2Q_DIV_4 + * @arg @ref LL_RCC_PLLSAI2Q_DIV_6 + * @arg @ref LL_RCC_PLLSAI2Q_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetQ(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2Q)); +} +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ + +/** + * @brief Get SAI2PLL division factor for PLLSAI2R + * @note Used for PLLADC2CLK (ADC clock) or PLLLCDCLK (LTDC clock) depending on devices + * @rmtoll PLLSAI2CFGR PLLSAI2R LL_RCC_PLLSAI2_GetR + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2R_DIV_2 + * @arg @ref LL_RCC_PLLSAI2R_DIV_4 + * @arg @ref LL_RCC_PLLSAI2R_DIV_6 + * @arg @ref LL_RCC_PLLSAI2R_DIV_8 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetR(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R)); +} + +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) +/** + * @brief Get Division factor for the PLLSAI2 + * @rmtoll PLLSAI2CFGR PLLSAI2M LL_RCC_PLLSAI2_GetDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2M_DIV_1 + * @arg @ref LL_RCC_PLLSAI2M_DIV_2 + * @arg @ref LL_RCC_PLLSAI2M_DIV_3 + * @arg @ref LL_RCC_PLLSAI2M_DIV_4 + * @arg @ref LL_RCC_PLLSAI2M_DIV_5 + * @arg @ref LL_RCC_PLLSAI2M_DIV_6 + * @arg @ref LL_RCC_PLLSAI2M_DIV_7 + * @arg @ref LL_RCC_PLLSAI2M_DIV_8 + * @arg @ref LL_RCC_PLLSAI2M_DIV_9 + * @arg @ref LL_RCC_PLLSAI2M_DIV_10 + * @arg @ref LL_RCC_PLLSAI2M_DIV_11 + * @arg @ref LL_RCC_PLLSAI2M_DIV_12 + * @arg @ref LL_RCC_PLLSAI2M_DIV_13 + * @arg @ref LL_RCC_PLLSAI2M_DIV_14 + * @arg @ref LL_RCC_PLLSAI2M_DIV_15 + * @arg @ref LL_RCC_PLLSAI2M_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetDivider(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M)); +} +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + +#if defined(RCC_CCIPR2_PLLSAI2DIVR) +/** + * @brief Get PLLSAI2 division factor for PLLSAI2DIVR + * @note Used for LTDC domain clock + * @rmtoll CCIPR2 PLLSAI2DIVR LL_RCC_PLLSAI2_GetDIVR + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_2 + * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_4 + * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_8 + * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetDIVR(void) +{ + return (uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR)); +} +#endif /* RCC_CCIPR2_PLLSAI2DIVR */ + +/** + * @brief Enable PLLSAI2 output mapped on SAI domain clock + * @rmtoll PLLSAI2CFGR PLLSAI2PEN LL_RCC_PLLSAI2_EnableDomain_SAI + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_EnableDomain_SAI(void) +{ + SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PEN); +} + +/** + * @brief Disable PLLSAI2 output mapped on SAI domain clock + * @note In order to save power, when of the PLLSAI2 is + * not used, should be 0 + * @rmtoll PLLSAI2CFGR PLLSAI2PEN LL_RCC_PLLSAI2_DisableDomain_SAI + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_DisableDomain_SAI(void) +{ + CLEAR_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PEN); +} + +/** + * @brief Check if PLLSAI2 output mapped on SAI domain clock is enabled + * @rmtoll PLLSAI2CFGR PLLSAI2PEN LL_RCC_PLLSAI2_IsEnabledDomain_SAI + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_IsEnabledDomain_SAI(void) +{ + return ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PEN) == (RCC_PLLSAI2CFGR_PLLSAI2PEN)) ? 1UL : 0UL); +} + +#if defined(DSI) +/** + * @brief Enable PLLSAI2 output mapped on DSI domain clock + * @rmtoll PLLSAI2CFGR PLLSAI2QEN LL_RCC_PLLSAI2_EnableDomain_DSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_EnableDomain_DSI(void) +{ + SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2QEN); +} + +/** + * @brief Disable PLLSAI2 output mapped on DSI domain clock + * @note In order to save power, when of the PLLSAI2 is + * not used, Main PLLSAI2 should be 0 + * @rmtoll PLLSAI2CFGR PLLSAI2QEN LL_RCC_PLLSAI2_DisableDomain_DSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_DisableDomain_DSI(void) +{ + CLEAR_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2QEN); +} + +/** + * @brief Check if PLLSAI2 output mapped on DSI domain clock is enabled + * @rmtoll PLLSAI2CFGR PLLSAI2QEN LL_RCC_PLLSAI2_IsEnabledDomain_DSI + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_IsEnabledDomain_DSI(void) +{ + return ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2QEN) == (RCC_PLLSAI2CFGR_PLLSAI2QEN)) ? 1UL : 0UL); +} +#endif /* DSI */ + +#if defined(LTDC) +/** + * @brief Enable PLLSAI2 output mapped on LTDC domain clock + * @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_EnableDomain_LTDC + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_EnableDomain_LTDC(void) +{ + SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN); +} + +/** + * @brief Disable PLLSAI2 output mapped on LTDC domain clock + * @note In order to save power, when of the PLLSAI2 is + * not used, Main PLLSAI2 should be 0 + * @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_DisableDomain_LTDC + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_DisableDomain_LTDC(void) +{ + CLEAR_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN); +} + +/** + * @brief Check if PLLSAI2 output mapped on LTDC domain clock is enabled + * @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_IsEnabledDomain_LTDC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_IsEnabledDomain_LTDC(void) +{ + return ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN) == (RCC_PLLSAI2CFGR_PLLSAI2REN)) ? 1UL : 0UL); +} +#else +/** + * @brief Enable PLLSAI2 output mapped on ADC domain clock + * @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_EnableDomain_ADC + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_EnableDomain_ADC(void) +{ + SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN); +} + +/** + * @brief Disable PLLSAI2 output mapped on ADC domain clock + * @note In order to save power, when of the PLLSAI2 is + * not used, Main PLLSAI2 should be 0 + * @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_DisableDomain_ADC + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLLSAI2_DisableDomain_ADC(void) +{ + CLEAR_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN); +} + +/** + * @brief Check if PLLSAI2 output mapped on ADC domain clock is enabled + * @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_IsEnabledDomain_ADC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_IsEnabledDomain_ADC(void) +{ + return ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN) == (RCC_PLLSAI2CFGR_PLLSAI2REN)) ? 1UL : 0UL); +} +#endif /* LTDC */ + +/** + * @} + */ +#endif /* RCC_PLLSAI2_SUPPORT */ + +#if defined(OCTOSPI1) +/** @defgroup RCC_LL_EF_OCTOSPI OCTOSPI + * @{ + */ + +/** + * @brief Configure OCTOSPI1 DQS delay + * @rmtoll DLYCFGR OCTOSPI1_DLY LL_RCC_OCTOSPI1_DelayConfig + * @param Delay OCTOSPI1 DQS delay between 0 and 15 + * @retval None + */ +__STATIC_INLINE void LL_RCC_OCTOSPI1_DelayConfig(uint32_t Delay) +{ + MODIFY_REG(RCC->DLYCFGR, RCC_DLYCFGR_OCTOSPI1_DLY, Delay); +} + +#if defined(OCTOSPI2) +/** + * @brief Configure OCTOSPI2 DQS delay + * @rmtoll DLYCFGR OCTOSPI2_DLY LL_RCC_OCTOSPI2_DelayConfig + * @param Delay OCTOSPI2 DQS delay between 0 and 15 + * @retval None + */ +__STATIC_INLINE void LL_RCC_OCTOSPI2_DelayConfig(uint32_t Delay) +{ + MODIFY_REG(RCC->DLYCFGR, RCC_DLYCFGR_OCTOSPI2_DLY, (Delay << RCC_DLYCFGR_OCTOSPI2_DLY_Pos)); +} +#endif /* OCTOSPI2 */ + +/** + * @} + */ +#endif /* OCTOSPI1 */ + +/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear LSI ready interrupt flag + * @rmtoll CICR LSIRDYC LL_RCC_ClearFlag_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSIRDYC); +} + +/** + * @brief Clear LSE ready interrupt flag + * @rmtoll CICR LSERDYC LL_RCC_ClearFlag_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSERDYC); +} + +/** + * @brief Clear MSI ready interrupt flag + * @rmtoll CICR MSIRDYC LL_RCC_ClearFlag_MSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_MSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_MSIRDYC); +} + +/** + * @brief Clear HSI ready interrupt flag + * @rmtoll CICR HSIRDYC LL_RCC_ClearFlag_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSIRDYC); +} + +/** + * @brief Clear HSE ready interrupt flag + * @rmtoll CICR HSERDYC LL_RCC_ClearFlag_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSERDYC); +} + +/** + * @brief Clear PLL ready interrupt flag + * @rmtoll CICR PLLRDYC LL_RCC_ClearFlag_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLLRDYC); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Clear HSI48 ready interrupt flag + * @rmtoll CICR HSI48RDYC LL_RCC_ClearFlag_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSI48RDYC); +} +#endif /* RCC_HSI48_SUPPORT */ + +#if defined(RCC_PLLSAI1_SUPPORT) +/** + * @brief Clear PLLSAI1 ready interrupt flag + * @rmtoll CICR PLLSAI1RDYC LL_RCC_ClearFlag_PLLSAI1RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLLSAI1RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLLSAI1RDYC); +} +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) +/** + * @brief Clear PLLSAI1 ready interrupt flag + * @rmtoll CICR PLLSAI2RDYC LL_RCC_ClearFlag_PLLSAI2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLLSAI2RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLLSAI2RDYC); +} +#endif /* RCC_PLLSAI2_SUPPORT */ + +/** + * @brief Clear Clock security system interrupt flag + * @rmtoll CICR CSSC LL_RCC_ClearFlag_HSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_CSSC); +} + +/** + * @brief Clear LSE Clock security system interrupt flag + * @rmtoll CICR LSECSSC LL_RCC_ClearFlag_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSECSSC); +} + +/** + * @brief Check if LSI ready interrupt occurred or not + * @rmtoll CIFR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSIRDYF) == RCC_CIFR_LSIRDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE ready interrupt occurred or not + * @rmtoll CIFR LSERDYF LL_RCC_IsActiveFlag_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSERDYF) == RCC_CIFR_LSERDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if MSI ready interrupt occurred or not + * @rmtoll CIFR MSIRDYF LL_RCC_IsActiveFlag_MSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_MSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_MSIRDYF) == RCC_CIFR_MSIRDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI ready interrupt occurred or not + * @rmtoll CIFR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSIRDYF) == RCC_CIFR_HSIRDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if HSE ready interrupt occurred or not + * @rmtoll CIFR HSERDYF LL_RCC_IsActiveFlag_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSERDYF) == RCC_CIFR_HSERDYF) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL ready interrupt occurred or not + * @rmtoll CIFR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLLRDYF) == RCC_CIFR_PLLRDYF) ? 1UL : 0UL); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Check if HSI48 ready interrupt occurred or not + * @rmtoll CIR HSI48RDYF LL_RCC_IsActiveFlag_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSI48RDYF) == RCC_CIFR_HSI48RDYF) ? 1UL : 0UL); +} +#endif /* RCC_HSI48_SUPPORT */ + +#if defined(RCC_PLLSAI1_SUPPORT) +/** + * @brief Check if PLLSAI1 ready interrupt occurred or not + * @rmtoll CIFR PLLSAI1RDYF LL_RCC_IsActiveFlag_PLLSAI1RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLSAI1RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI1RDYF) == RCC_CIFR_PLLSAI1RDYF) ? 1UL : 0UL); +} +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) +/** + * @brief Check if PLLSAI1 ready interrupt occurred or not + * @rmtoll CIFR PLLSAI2RDYF LL_RCC_IsActiveFlag_PLLSAI2RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLSAI2RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI2RDYF) == RCC_CIFR_PLLSAI2RDYF) ? 1UL : 0UL); +} +#endif /* RCC_PLLSAI2_SUPPORT */ + +/** + * @brief Check if Clock security system interrupt occurred or not + * @rmtoll CIFR CSSF LL_RCC_IsActiveFlag_HSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_CSSF) == RCC_CIFR_CSSF) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE Clock security system interrupt occurred or not + * @rmtoll CIFR LSECSSF LL_RCC_IsActiveFlag_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSECSSF) == RCC_CIFR_LSECSSF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag FW reset is set or not. + * @rmtoll CSR FWRSTF LL_RCC_IsActiveFlag_FWRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_FWRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_FWRSTF) == RCC_CSR_FWRSTF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Independent Watchdog reset is set or not. + * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == RCC_CSR_IWDGRSTF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Low Power reset is set or not. + * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == RCC_CSR_LPWRRSTF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag is set or not. + * @rmtoll CSR OBLRSTF LL_RCC_IsActiveFlag_OBLRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_OBLRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_OBLRSTF) == RCC_CSR_OBLRSTF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Pin reset is set or not. + * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == RCC_CSR_PINRSTF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == RCC_CSR_SFTRSTF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Window Watchdog reset is set or not. + * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == RCC_CSR_WWDGRSTF) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag BOR reset is set or not. + * @rmtoll CSR BORRSTF LL_RCC_IsActiveFlag_BORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_BORRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_BORRSTF) == RCC_CSR_BORRSTF) ? 1UL : 0UL); +} + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll CSR RMVF LL_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_RMVF); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_EnableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Enable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_EnableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Enable MSI ready interrupt + * @rmtoll CIER MSIRDYIE LL_RCC_EnableIT_MSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_MSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_MSIRDYIE); +} + +/** + * @brief Enable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_EnableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Enable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_EnableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Enable PLL ready interrupt + * @rmtoll CIER PLLRDYIE LL_RCC_EnableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLLRDYIE); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Enable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_EnableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} +#endif /* RCC_HSI48_SUPPORT */ + +#if defined(RCC_PLLSAI1_SUPPORT) +/** + * @brief Enable PLLSAI1 ready interrupt + * @rmtoll CIER PLLSAI1RDYIE LL_RCC_EnableIT_PLLSAI1RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLLSAI1RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE); +} +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) +/** + * @brief Enable PLLSAI2 ready interrupt + * @rmtoll CIER PLLSAI2RDYIE LL_RCC_EnableIT_PLLSAI2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLLSAI2RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE); +} +#endif /* RCC_PLLSAI2_SUPPORT */ + +/** + * @brief Enable LSE clock security system interrupt + * @rmtoll CIER LSECSSIE LL_RCC_EnableIT_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSECSS(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSECSSIE); +} + +/** + * @brief Disable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_DisableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Disable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_DisableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Disable MSI ready interrupt + * @rmtoll CIER MSIRDYIE LL_RCC_DisableIT_MSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_MSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_MSIRDYIE); +} + +/** + * @brief Disable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_DisableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Disable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_DisableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Disable PLL ready interrupt + * @rmtoll CIER PLLRDYIE LL_RCC_DisableIT_PLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLLRDYIE); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Disable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_DisableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} +#endif /* RCC_HSI48_SUPPORT */ + +#if defined(RCC_PLLSAI1_SUPPORT) +/** + * @brief Disable PLLSAI1 ready interrupt + * @rmtoll CIER PLLSAI1RDYIE LL_RCC_DisableIT_PLLSAI1RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLLSAI1RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE); +} +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) +/** + * @brief Disable PLLSAI2 ready interrupt + * @rmtoll CIER PLLSAI2RDYIE LL_RCC_DisableIT_PLLSAI2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLLSAI2RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE); +} +#endif /* RCC_PLLSAI2_SUPPORT */ + +/** + * @brief Disable LSE clock security system interrupt + * @rmtoll CIER LSECSSIE LL_RCC_DisableIT_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSECSS(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSECSSIE); +} + +/** + * @brief Checks if LSI ready interrupt source is enabled or disabled. + * @rmtoll CIER LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSIRDYIE) == RCC_CIER_LSIRDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if LSE ready interrupt source is enabled or disabled. + * @rmtoll CIER LSERDYIE LL_RCC_IsEnabledIT_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSERDYIE) == RCC_CIER_LSERDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if MSI ready interrupt source is enabled or disabled. + * @rmtoll CIER MSIRDYIE LL_RCC_IsEnabledIT_MSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_MSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_MSIRDYIE) == RCC_CIER_MSIRDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSI ready interrupt source is enabled or disabled. + * @rmtoll CIER HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSIRDYIE) == RCC_CIER_HSIRDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSE ready interrupt source is enabled or disabled. + * @rmtoll CIER HSERDYIE LL_RCC_IsEnabledIT_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSERDYIE) == RCC_CIER_HSERDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if PLL ready interrupt source is enabled or disabled. + * @rmtoll CIER PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLLRDYIE) == RCC_CIER_PLLRDYIE) ? 1UL : 0UL); +} + +#if defined(RCC_HSI48_SUPPORT) +/** + * @brief Checks if HSI48 ready interrupt source is enabled or disabled. + * @rmtoll CIER HSI48RDYIE LL_RCC_IsEnabledIT_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE) == RCC_CIER_HSI48RDYIE) ? 1UL : 0UL); +} +#endif /* RCC_HSI48_SUPPORT */ + +#if defined(RCC_PLLSAI1_SUPPORT) +/** + * @brief Checks if PLLSAI1 ready interrupt source is enabled or disabled. + * @rmtoll CIER PLLSAI1RDYIE LL_RCC_IsEnabledIT_PLLSAI1RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLSAI1RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE) == RCC_CIER_PLLSAI1RDYIE) ? 1UL : 0UL); +} +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) +/** + * @brief Checks if PLLSAI2 ready interrupt source is enabled or disabled. + * @rmtoll CIER PLLSAI2RDYIE LL_RCC_IsEnabledIT_PLLSAI2RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLSAI2RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE) == RCC_CIER_PLLSAI2RDYIE) ? 1UL : 0UL); +} +#endif /* RCC_PLLSAI2_SUPPORT */ + +/** + * @brief Checks if LSECSS interrupt source is enabled or disabled. + * @rmtoll CIER LSECSSIE LL_RCC_IsEnabledIT_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSECSS(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSECSSIE) == RCC_CIER_LSECSSIE) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_RCC_DeInit(void); +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions + * @{ + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource); +#if defined(UART4) || defined(UART5) +uint32_t LL_RCC_GetUARTClockFreq(uint32_t UARTxSource); +#endif /* UART4 || UART5 */ +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource); +uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource); +uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource); +#if defined(SAI1) +uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource); +#endif /* SAI1 */ +#if defined(SDMMC1) +#if defined(RCC_CCIPR2_SDMMCSEL) +uint32_t LL_RCC_GetSDMMCKernelClockFreq(uint32_t SDMMCxSource); +#endif +uint32_t LL_RCC_GetSDMMCClockFreq(uint32_t SDMMCxSource); +#endif /* SDMMC1 */ +uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource); +#if defined(USB_OTG_FS) || defined(USB) +uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); +#endif /* USB_OTG_FS || USB */ +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource); +#if defined(SWPMI1) +uint32_t LL_RCC_GetSWPMIClockFreq(uint32_t SWPMIxSource); +#endif /* SWPMI1 */ +#if defined(DFSDM1_Channel0) +uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource); +#if defined(RCC_CCIPR2_DFSDM1SEL) +uint32_t LL_RCC_GetDFSDMAudioClockFreq(uint32_t DFSDMxSource); +#endif /* RCC_CCIPR2_DFSDM1SEL */ +#endif /* DFSDM1_Channel0 */ +#if defined(LTDC) +uint32_t LL_RCC_GetLTDCClockFreq(uint32_t LTDCxSource); +#endif /* LTDC */ +#if defined(DSI) +uint32_t LL_RCC_GetDSIClockFreq(uint32_t DSIxSource); +#endif /* DSI */ +#if defined(OCTOSPI1) +uint32_t LL_RCC_GetOCTOSPIClockFreq(uint32_t OCTOSPIxSource); +#endif /* OCTOSPI1 */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_RCC_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_system.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_system.h new file mode 100644 index 0000000..f9ac27e --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_system.h @@ -0,0 +1,1629 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_system.h + * @author MCD Application Team + * @brief Header file of SYSTEM LL module. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL SYSTEM driver contains a set of generic APIs that can be + used by user: + (+) Some of the FLASH features need to be handled in the SYSTEM file. + (+) Access to DBGCMU registers + (+) Access to SYSCFG registers + (+) Access to VREFBUF registers + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_SYSTEM_H +#define STM32L4xx_LL_SYSTEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) || defined (VREFBUF) + +/** @defgroup SYSTEM_LL SYSTEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants + * @{ + */ + +#define LL_EXTI_REGISTER_PINPOS_SHFT 16U /*!< Define used to shift pin position in EXTICR register */ + +/** + * @brief Power-down in Run mode Flash key + */ +#define FLASH_PDKEY1 0x04152637U /*!< Flash power down key1 */ +#define FLASH_PDKEY2 0xFAFBFCFDU /*!< Flash power down key2: used with FLASH_PDKEY1 + to unlock the RUN_PD bit in FLASH_ACR */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants + * @{ + */ + +/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP +* @{ +*/ +#define LL_SYSCFG_REMAP_FLASH 0x00000000U /*!< Main Flash memory mapped at 0x00000000 */ +#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_MEMRMP_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */ +#define LL_SYSCFG_REMAP_SRAM (SYSCFG_MEMRMP_MEM_MODE_1 | SYSCFG_MEMRMP_MEM_MODE_0) /*!< SRAM1 mapped at 0x00000000 */ +#if defined(FMC_Bank1_R) +#define LL_SYSCFG_REMAP_FMC SYSCFG_MEMRMP_MEM_MODE_1 /*!< FMC bank 1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 */ +#endif /* FMC_Bank1_R */ +#define LL_SYSCFG_REMAP_QUADSPI (SYSCFG_MEMRMP_MEM_MODE_2 | SYSCFG_MEMRMP_MEM_MODE_1) /*!< QUADSPI memory mapped at 0x00000000 */ +/** + * @} + */ + +#if defined(SYSCFG_MEMRMP_FB_MODE) +/** @defgroup SYSTEM_LL_EC_BANKMODE SYSCFG BANK MODE + * @{ + */ +#define LL_SYSCFG_BANKMODE_BANK1 0x00000000U /*!< Flash Bank1 mapped at 0x08000000 (and aliased @0x00000000) + and Flash Bank2 mapped at 0x08080000 (and aliased at 0x00080000) */ +#define LL_SYSCFG_BANKMODE_BANK2 SYSCFG_MEMRMP_FB_MODE /*!< Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000) + and Flash Bank1 mapped at 0x08080000 (and aliased at 0x00080000) */ +/** + * @} + */ + +#endif /* SYSCFG_MEMRMP_FB_MODE */ +/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS + * @{ + */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#if defined(SYSCFG_CFGR1_I2C_PB8_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ +#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */ +#if defined(SYSCFG_CFGR1_I2C_PB9_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ +#endif /* SYSCFG_CFGR1_I2C_PB9_FMP */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ +#if defined(I2C2) +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */ +#endif /* I2C2 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */ +#if defined(I2C4) +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 SYSCFG_CFGR1_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */ +#endif /* I2C4 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT + * @{ + */ +#define LL_SYSCFG_EXTI_PORTA 0U /*!< EXTI PORT A */ +#define LL_SYSCFG_EXTI_PORTB 1U /*!< EXTI PORT B */ +#define LL_SYSCFG_EXTI_PORTC 2U /*!< EXTI PORT C */ +#define LL_SYSCFG_EXTI_PORTD 3U /*!< EXTI PORT D */ +#define LL_SYSCFG_EXTI_PORTE 4U /*!< EXTI PORT E */ +#if defined(GPIOF) +#define LL_SYSCFG_EXTI_PORTF 5U /*!< EXTI PORT F */ +#endif /* GPIOF */ +#if defined(GPIOG) +#define LL_SYSCFG_EXTI_PORTG 6U /*!< EXTI PORT G */ +#endif /* GPIOG */ +#define LL_SYSCFG_EXTI_PORTH 7U /*!< EXTI PORT H */ +#if defined(GPIOI) +#define LL_SYSCFG_EXTI_PORTI 8U /*!< EXTI PORT I */ +#endif /* GPIOI */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE + * @{ + */ +#define LL_SYSCFG_EXTI_LINE0 (uint32_t)((0x000FU << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /* !< EXTI_POSITION_0 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE1 (uint32_t)((0x00F0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /* !< EXTI_POSITION_4 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE2 (uint32_t)((0x0F00U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /* !< EXTI_POSITION_8 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE3 (uint32_t)((0xF000U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /* !< EXTI_POSITION_12 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE4 (uint32_t)((0x000FU << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /* !< EXTI_POSITION_0 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE5 (uint32_t)((0x00F0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /* !< EXTI_POSITION_4 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE6 (uint32_t)((0x0F00U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /* !< EXTI_POSITION_8 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE7 (uint32_t)((0xF000U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /* !< EXTI_POSITION_12 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE8 (uint32_t)((0x000FU << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /* !< EXTI_POSITION_0 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE9 (uint32_t)((0x00F0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /* !< EXTI_POSITION_4 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE10 (uint32_t)((0x0F00U << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /* !< EXTI_POSITION_8 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE11 (uint32_t)((0xF000U << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /* !< EXTI_POSITION_12 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE12 (uint32_t)((0x000FU << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /* !< EXTI_POSITION_0 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE13 (uint32_t)((0x00F0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /* !< EXTI_POSITION_4 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE14 (uint32_t)((0x0F00U << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /* !< EXTI_POSITION_8 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE15 (uint32_t)((0xF000U << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /* !< EXTI_POSITION_12 | EXTICR[3] */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK + * @{ + */ +#define LL_SYSCFG_TIMBREAK_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal + with Break Input of TIM1/8/15/16/17 */ +#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection + with TIM1/8/15/16/17 Break Input + and also the PVDE and PLS bits of the Power Control Interface */ +#define LL_SYSCFG_TIMBREAK_SRAM2_PARITY SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM2_PARITY error signal + with Break Input of TIM1/8/15/16/17 */ +#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4 + with Break Input of TIM1/15/16/17 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_SRAM2WRP SYSCFG SRAM2 WRP + * @{ + */ +#define LL_SYSCFG_SRAM2WRP_PAGE0 SYSCFG_SWPR_PAGE0 /*!< SRAM2 Write protection page 0 */ +#define LL_SYSCFG_SRAM2WRP_PAGE1 SYSCFG_SWPR_PAGE1 /*!< SRAM2 Write protection page 1 */ +#define LL_SYSCFG_SRAM2WRP_PAGE2 SYSCFG_SWPR_PAGE2 /*!< SRAM2 Write protection page 2 */ +#define LL_SYSCFG_SRAM2WRP_PAGE3 SYSCFG_SWPR_PAGE3 /*!< SRAM2 Write protection page 3 */ +#define LL_SYSCFG_SRAM2WRP_PAGE4 SYSCFG_SWPR_PAGE4 /*!< SRAM2 Write protection page 4 */ +#define LL_SYSCFG_SRAM2WRP_PAGE5 SYSCFG_SWPR_PAGE5 /*!< SRAM2 Write protection page 5 */ +#define LL_SYSCFG_SRAM2WRP_PAGE6 SYSCFG_SWPR_PAGE6 /*!< SRAM2 Write protection page 6 */ +#define LL_SYSCFG_SRAM2WRP_PAGE7 SYSCFG_SWPR_PAGE7 /*!< SRAM2 Write protection page 7 */ +#define LL_SYSCFG_SRAM2WRP_PAGE8 SYSCFG_SWPR_PAGE8 /*!< SRAM2 Write protection page 8 */ +#define LL_SYSCFG_SRAM2WRP_PAGE9 SYSCFG_SWPR_PAGE9 /*!< SRAM2 Write protection page 9 */ +#define LL_SYSCFG_SRAM2WRP_PAGE10 SYSCFG_SWPR_PAGE10 /*!< SRAM2 Write protection page 10 */ +#define LL_SYSCFG_SRAM2WRP_PAGE11 SYSCFG_SWPR_PAGE11 /*!< SRAM2 Write protection page 11 */ +#define LL_SYSCFG_SRAM2WRP_PAGE12 SYSCFG_SWPR_PAGE12 /*!< SRAM2 Write protection page 12 */ +#define LL_SYSCFG_SRAM2WRP_PAGE13 SYSCFG_SWPR_PAGE13 /*!< SRAM2 Write protection page 13 */ +#define LL_SYSCFG_SRAM2WRP_PAGE14 SYSCFG_SWPR_PAGE14 /*!< SRAM2 Write protection page 14 */ +#define LL_SYSCFG_SRAM2WRP_PAGE15 SYSCFG_SWPR_PAGE15 /*!< SRAM2 Write protection page 15 */ +#if defined(SYSCFG_SWPR_PAGE31) +#define LL_SYSCFG_SRAM2WRP_PAGE16 SYSCFG_SWPR_PAGE16 /*!< SRAM2 Write protection page 16 */ +#define LL_SYSCFG_SRAM2WRP_PAGE17 SYSCFG_SWPR_PAGE17 /*!< SRAM2 Write protection page 17 */ +#define LL_SYSCFG_SRAM2WRP_PAGE18 SYSCFG_SWPR_PAGE18 /*!< SRAM2 Write protection page 18 */ +#define LL_SYSCFG_SRAM2WRP_PAGE19 SYSCFG_SWPR_PAGE19 /*!< SRAM2 Write protection page 19 */ +#define LL_SYSCFG_SRAM2WRP_PAGE20 SYSCFG_SWPR_PAGE20 /*!< SRAM2 Write protection page 20 */ +#define LL_SYSCFG_SRAM2WRP_PAGE21 SYSCFG_SWPR_PAGE21 /*!< SRAM2 Write protection page 21 */ +#define LL_SYSCFG_SRAM2WRP_PAGE22 SYSCFG_SWPR_PAGE22 /*!< SRAM2 Write protection page 22 */ +#define LL_SYSCFG_SRAM2WRP_PAGE23 SYSCFG_SWPR_PAGE23 /*!< SRAM2 Write protection page 23 */ +#define LL_SYSCFG_SRAM2WRP_PAGE24 SYSCFG_SWPR_PAGE24 /*!< SRAM2 Write protection page 24 */ +#define LL_SYSCFG_SRAM2WRP_PAGE25 SYSCFG_SWPR_PAGE25 /*!< SRAM2 Write protection page 25 */ +#define LL_SYSCFG_SRAM2WRP_PAGE26 SYSCFG_SWPR_PAGE26 /*!< SRAM2 Write protection page 26 */ +#define LL_SYSCFG_SRAM2WRP_PAGE27 SYSCFG_SWPR_PAGE27 /*!< SRAM2 Write protection page 27 */ +#define LL_SYSCFG_SRAM2WRP_PAGE28 SYSCFG_SWPR_PAGE28 /*!< SRAM2 Write protection page 28 */ +#define LL_SYSCFG_SRAM2WRP_PAGE29 SYSCFG_SWPR_PAGE29 /*!< SRAM2 Write protection page 29 */ +#define LL_SYSCFG_SRAM2WRP_PAGE30 SYSCFG_SWPR_PAGE30 /*!< SRAM2 Write protection page 30 */ +#define LL_SYSCFG_SRAM2WRP_PAGE31 SYSCFG_SWPR_PAGE31 /*!< SRAM2 Write protection page 31 */ +#endif /* SYSCFG_SWPR_PAGE31 */ +#if defined(SYSCFG_SWPR2_PAGE63) +#define LL_SYSCFG_SRAM2WRP_PAGE32 SYSCFG_SWPR2_PAGE32 /*!< SRAM2 Write protection page 32 */ +#define LL_SYSCFG_SRAM2WRP_PAGE33 SYSCFG_SWPR2_PAGE33 /*!< SRAM2 Write protection page 33 */ +#define LL_SYSCFG_SRAM2WRP_PAGE34 SYSCFG_SWPR2_PAGE34 /*!< SRAM2 Write protection page 34 */ +#define LL_SYSCFG_SRAM2WRP_PAGE35 SYSCFG_SWPR2_PAGE35 /*!< SRAM2 Write protection page 35 */ +#define LL_SYSCFG_SRAM2WRP_PAGE36 SYSCFG_SWPR2_PAGE36 /*!< SRAM2 Write protection page 36 */ +#define LL_SYSCFG_SRAM2WRP_PAGE37 SYSCFG_SWPR2_PAGE37 /*!< SRAM2 Write protection page 37 */ +#define LL_SYSCFG_SRAM2WRP_PAGE38 SYSCFG_SWPR2_PAGE38 /*!< SRAM2 Write protection page 38 */ +#define LL_SYSCFG_SRAM2WRP_PAGE39 SYSCFG_SWPR2_PAGE39 /*!< SRAM2 Write protection page 39 */ +#define LL_SYSCFG_SRAM2WRP_PAGE40 SYSCFG_SWPR2_PAGE40 /*!< SRAM2 Write protection page 40 */ +#define LL_SYSCFG_SRAM2WRP_PAGE41 SYSCFG_SWPR2_PAGE41 /*!< SRAM2 Write protection page 41 */ +#define LL_SYSCFG_SRAM2WRP_PAGE42 SYSCFG_SWPR2_PAGE42 /*!< SRAM2 Write protection page 42 */ +#define LL_SYSCFG_SRAM2WRP_PAGE43 SYSCFG_SWPR2_PAGE43 /*!< SRAM2 Write protection page 43 */ +#define LL_SYSCFG_SRAM2WRP_PAGE44 SYSCFG_SWPR2_PAGE44 /*!< SRAM2 Write protection page 44 */ +#define LL_SYSCFG_SRAM2WRP_PAGE45 SYSCFG_SWPR2_PAGE45 /*!< SRAM2 Write protection page 45 */ +#define LL_SYSCFG_SRAM2WRP_PAGE46 SYSCFG_SWPR2_PAGE46 /*!< SRAM2 Write protection page 46 */ +#define LL_SYSCFG_SRAM2WRP_PAGE47 SYSCFG_SWPR2_PAGE47 /*!< SRAM2 Write protection page 47 */ +#define LL_SYSCFG_SRAM2WRP_PAGE48 SYSCFG_SWPR2_PAGE48 /*!< SRAM2 Write protection page 48 */ +#define LL_SYSCFG_SRAM2WRP_PAGE49 SYSCFG_SWPR2_PAGE49 /*!< SRAM2 Write protection page 49 */ +#define LL_SYSCFG_SRAM2WRP_PAGE50 SYSCFG_SWPR2_PAGE50 /*!< SRAM2 Write protection page 50 */ +#define LL_SYSCFG_SRAM2WRP_PAGE51 SYSCFG_SWPR2_PAGE51 /*!< SRAM2 Write protection page 51 */ +#define LL_SYSCFG_SRAM2WRP_PAGE52 SYSCFG_SWPR2_PAGE52 /*!< SRAM2 Write protection page 52 */ +#define LL_SYSCFG_SRAM2WRP_PAGE53 SYSCFG_SWPR2_PAGE53 /*!< SRAM2 Write protection page 53 */ +#define LL_SYSCFG_SRAM2WRP_PAGE54 SYSCFG_SWPR2_PAGE54 /*!< SRAM2 Write protection page 54 */ +#define LL_SYSCFG_SRAM2WRP_PAGE55 SYSCFG_SWPR2_PAGE55 /*!< SRAM2 Write protection page 55 */ +#define LL_SYSCFG_SRAM2WRP_PAGE56 SYSCFG_SWPR2_PAGE56 /*!< SRAM2 Write protection page 56 */ +#define LL_SYSCFG_SRAM2WRP_PAGE57 SYSCFG_SWPR2_PAGE57 /*!< SRAM2 Write protection page 57 */ +#define LL_SYSCFG_SRAM2WRP_PAGE58 SYSCFG_SWPR2_PAGE58 /*!< SRAM2 Write protection page 58 */ +#define LL_SYSCFG_SRAM2WRP_PAGE59 SYSCFG_SWPR2_PAGE59 /*!< SRAM2 Write protection page 59 */ +#define LL_SYSCFG_SRAM2WRP_PAGE60 SYSCFG_SWPR2_PAGE60 /*!< SRAM2 Write protection page 60 */ +#define LL_SYSCFG_SRAM2WRP_PAGE61 SYSCFG_SWPR2_PAGE61 /*!< SRAM2 Write protection page 61 */ +#define LL_SYSCFG_SRAM2WRP_PAGE62 SYSCFG_SWPR2_PAGE62 /*!< SRAM2 Write protection page 62 */ +#define LL_SYSCFG_SRAM2WRP_PAGE63 SYSCFG_SWPR2_PAGE63 /*!< SRAM2 Write protection page 63 */ +#endif /* SYSCFG_SWPR2_PAGE63 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment + * @{ + */ +#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */ +#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1FZR1_DBG_TIM2_STOP /*!< The counter clock of TIM2 is stopped when the core is halted*/ +#if defined(TIM3) +#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1FZR1_DBG_TIM3_STOP /*!< The counter clock of TIM3 is stopped when the core is halted*/ +#endif /* TIM3 */ +#if defined(TIM4) +#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1FZR1_DBG_TIM4_STOP /*!< The counter clock of TIM4 is stopped when the core is halted*/ +#endif /* TIM4 */ +#if defined(TIM5) +#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1FZR1_DBG_TIM5_STOP /*!< The counter clock of TIM5 is stopped when the core is halted*/ +#endif /* TIM5 */ +#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1FZR1_DBG_TIM6_STOP /*!< The counter clock of TIM6 is stopped when the core is halted*/ +#if defined(TIM7) +#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1FZR1_DBG_TIM7_STOP /*!< The counter clock of TIM7 is stopped when the core is halted*/ +#endif /* TIM7 */ +#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB1FZR1_DBG_RTC_STOP /*!< The clock of the RTC counter is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1FZR1_DBG_WWDG_STOP /*!< The window watchdog counter clock is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1FZR1_DBG_IWDG_STOP /*!< The independent watchdog counter clock is stopped when the core is halted*/ +#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1FZR1_DBG_I2C1_STOP /*!< The I2C1 SMBus timeout is frozen*/ +#if defined(I2C2) +#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1FZR1_DBG_I2C2_STOP /*!< The I2C2 SMBus timeout is frozen*/ +#endif /* I2C2 */ +#define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1FZR1_DBG_I2C3_STOP /*!< The I2C3 SMBus timeout is frozen*/ +#define LL_DBGMCU_APB1_GRP1_CAN_STOP DBGMCU_APB1FZR1_DBG_CAN_STOP /*!< The bxCAN receive registers are frozen*/ +#if defined(CAN2) +#define LL_DBGMCU_APB1_GRP1_CAN2_STOP DBGMCU_APB1FZR1_DBG_CAN2_STOP /*!< The bxCAN2 receive registers are frozen*/ +#endif /* CAN2 */ +#define LL_DBGMCU_APB1_GRP1_LPTIM1_STOP DBGMCU_APB1FZR1_DBG_LPTIM1_STOP /*!< The counter clock of LPTIM1 is stopped when the core is halted*/ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB1_GRP2_STOP_IP DBGMCU APB1 GRP2 STOP IP + * @{ + */ +#if defined(I2C4) +#define LL_DBGMCU_APB1_GRP2_I2C4_STOP DBGMCU_APB1FZR2_DBG_I2C4_STOP /*!< The I2C4 SMBus timeout is frozen*/ +#endif /* I2C4 */ +#define LL_DBGMCU_APB1_GRP2_LPTIM2_STOP DBGMCU_APB1FZR2_DBG_LPTIM2_STOP /*!< The counter clock of LPTIM2 is stopped when the core is halted*/ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_APB2FZ_DBG_TIM1_STOP /*!< The counter clock of TIM1 is stopped when the core is halted*/ +#if defined(TIM8) +#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_APB2FZ_DBG_TIM8_STOP /*!< The counter clock of TIM8 is stopped when the core is halted*/ +#endif /* TIM8 */ +#define LL_DBGMCU_APB2_GRP1_TIM15_STOP DBGMCU_APB2FZ_DBG_TIM15_STOP /*!< The counter clock of TIM15 is stopped when the core is halted*/ +#define LL_DBGMCU_APB2_GRP1_TIM16_STOP DBGMCU_APB2FZ_DBG_TIM16_STOP /*!< The counter clock of TIM16 is stopped when the core is halted*/ +#if defined(TIM17) +#define LL_DBGMCU_APB2_GRP1_TIM17_STOP DBGMCU_APB2FZ_DBG_TIM17_STOP /*!< The counter clock of TIM17 is stopped when the core is halted*/ +#endif /* TIM17 */ +/** + * @} + */ + +#if defined(VREFBUF) +/** @defgroup SYSTEM_LL_EC_VOLTAGE VREFBUF VOLTAGE + * @{ + */ +#define LL_VREFBUF_VOLTAGE_SCALE0 ((uint32_t)0x00000000) /*!< Voltage reference scale 0 (VREF_OUT1) */ +#define LL_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS /*!< Voltage reference scale 1 (VREF_OUT2) */ +/** + * @} + */ +#endif /* VREFBUF */ + +/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY + * @{ + */ +#define LL_FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */ +#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */ +#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */ +#define LL_FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */ +#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */ +#if defined(FLASH_ACR_LATENCY_5WS) +#define LL_FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH five wait state */ +#define LL_FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH six wait state */ +#define LL_FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH seven wait states */ +#define LL_FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH eight wait states */ +#define LL_FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH nine wait states */ +#define LL_FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH ten wait states */ +#define LL_FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH eleven wait states */ +#define LL_FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH twelve wait states */ +#define LL_FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH thirteen wait states */ +#define LL_FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH fourteen wait states */ +#define LL_FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH fifteen wait states */ +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions + * @{ + */ + +/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG + * @{ + */ + +/** + * @brief Set memory mapping at address 0x00000000 + * @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_SetRemapMemory + * @param Memory This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_REMAP_FLASH + * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH + * @arg @ref LL_SYSCFG_REMAP_SRAM + * @arg @ref LL_SYSCFG_REMAP_FMC (*) + * @arg @ref LL_SYSCFG_REMAP_QUADSPI + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory) +{ + MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, Memory); +} + +/** + * @brief Get memory mapping at address 0x00000000 + * @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_GetRemapMemory + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_REMAP_FLASH + * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH + * @arg @ref LL_SYSCFG_REMAP_SRAM + * @arg @ref LL_SYSCFG_REMAP_FMC (*) + * @arg @ref LL_SYSCFG_REMAP_QUADSPI + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE)); +} + +#if defined(SYSCFG_MEMRMP_FB_MODE) +/** + * @brief Select Flash bank mode (Bank flashed at 0x08000000) + * @rmtoll SYSCFG_MEMRMP FB_MODE LL_SYSCFG_SetFlashBankMode + * @param Bank This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_BANKMODE_BANK1 + * @arg @ref LL_SYSCFG_BANKMODE_BANK2 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetFlashBankMode(uint32_t Bank) +{ + MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_FB_MODE, Bank); +} + +/** + * @brief Get Flash bank mode (Bank flashed at 0x08000000) + * @rmtoll SYSCFG_MEMRMP FB_MODE LL_SYSCFG_GetFlashBankMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_BANKMODE_BANK1 + * @arg @ref LL_SYSCFG_BANKMODE_BANK2 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashBankMode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_FB_MODE)); +} +#endif /* SYSCFG_MEMRMP_FB_MODE */ + +/** + * @brief Firewall protection enabled + * @rmtoll SYSCFG_CFGR1 FWDIS LL_SYSCFG_EnableFirewall + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableFirewall(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FWDIS); +} + +/** + * @brief Check if Firewall protection is enabled or not + * @rmtoll SYSCFG_CFGR1 FWDIS LL_SYSCFG_IsEnabledFirewall + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledFirewall(void) +{ + return !(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FWDIS) == SYSCFG_CFGR1_FWDIS); +} + +/** + * @brief Enable I/O analog switch voltage booster. + * @note When voltage booster is enabled, I/O analog switches are supplied + * by a dedicated voltage booster, from VDD power domain. This is + * the recommended configuration with low VDDA voltage operation. + * @note The I/O analog switch voltage booster is relevant for peripherals + * using I/O in analog input: ADC, COMP, OPAMP. + * However, COMP and OPAMP inputs have a high impedance and + * voltage booster do not impact performance significantly. + * Therefore, the voltage booster is mainly intended for + * usage with ADC. + * @rmtoll SYSCFG_CFGR1 BOOSTEN LL_SYSCFG_EnableAnalogBooster + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableAnalogBooster(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Disable I/O analog switch voltage booster. + * @note When voltage booster is enabled, I/O analog switches are supplied + * by a dedicated voltage booster, from VDD power domain. This is + * the recommended configuration with low VDDA voltage operation. + * @note The I/O analog switch voltage booster is relevant for peripherals + * using I/O in analog input: ADC, COMP, OPAMP. + * However, COMP and OPAMP inputs have a high impedance and + * voltage booster do not impact performance significantly. + * Therefore, the voltage booster is mainly intended for + * usage with ADC. + * @rmtoll SYSCFG_CFGR1 BOOSTEN LL_SYSCFG_DisableAnalogBooster + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableAnalogBooster(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_CFGR1 I2C_PBx_FMP LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_CFGR1 I2Cx_FMP LL_SYSCFG_EnableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + SET_BIT(SYSCFG->CFGR1, ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_CFGR1 I2C_PBx_FMP LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_CFGR1 I2Cx_FMP LL_SYSCFG_DisableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + CLEAR_BIT(SYSCFG->CFGR1, ConfigFastModePlus); +} + +/** + * @brief Enable Floating Point Unit Invalid operation Interrupt + * @rmtoll SYSCFG_CFGR1 FPU_IE_0 LL_SYSCFG_EnableIT_FPU_IOC + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_IOC(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_0); +} + +/** + * @brief Enable Floating Point Unit Divide-by-zero Interrupt + * @rmtoll SYSCFG_CFGR1 FPU_IE_1 LL_SYSCFG_EnableIT_FPU_DZC + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_DZC(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_1); +} + +/** + * @brief Enable Floating Point Unit Underflow Interrupt + * @rmtoll SYSCFG_CFGR1 FPU_IE_2 LL_SYSCFG_EnableIT_FPU_UFC + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_UFC(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_2); +} + +/** + * @brief Enable Floating Point Unit Overflow Interrupt + * @rmtoll SYSCFG_CFGR1 FPU_IE_3 LL_SYSCFG_EnableIT_FPU_OFC + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_OFC(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_3); +} + +/** + * @brief Enable Floating Point Unit Input denormal Interrupt + * @rmtoll SYSCFG_CFGR1 FPU_IE_4 LL_SYSCFG_EnableIT_FPU_IDC + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_IDC(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_4); +} + +/** + * @brief Enable Floating Point Unit Inexact Interrupt + * @rmtoll SYSCFG_CFGR1 FPU_IE_5 LL_SYSCFG_EnableIT_FPU_IXC + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_IXC(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_5); +} + +/** + * @brief Disable Floating Point Unit Invalid operation Interrupt + * @rmtoll SYSCFG_CFGR1 FPU_IE_0 LL_SYSCFG_DisableIT_FPU_IOC + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_IOC(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_0); +} + +/** + * @brief Disable Floating Point Unit Divide-by-zero Interrupt + * @rmtoll SYSCFG_CFGR1 FPU_IE_1 LL_SYSCFG_DisableIT_FPU_DZC + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_DZC(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_1); +} + +/** + * @brief Disable Floating Point Unit Underflow Interrupt + * @rmtoll SYSCFG_CFGR1 FPU_IE_2 LL_SYSCFG_DisableIT_FPU_UFC + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_UFC(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_2); +} + +/** + * @brief Disable Floating Point Unit Overflow Interrupt + * @rmtoll SYSCFG_CFGR1 FPU_IE_3 LL_SYSCFG_DisableIT_FPU_OFC + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_OFC(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_3); +} + +/** + * @brief Disable Floating Point Unit Input denormal Interrupt + * @rmtoll SYSCFG_CFGR1 FPU_IE_4 LL_SYSCFG_DisableIT_FPU_IDC + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_IDC(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_4); +} + +/** + * @brief Disable Floating Point Unit Inexact Interrupt + * @rmtoll SYSCFG_CFGR1 FPU_IE_5 LL_SYSCFG_DisableIT_FPU_IXC + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_IXC(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_5); +} + +/** + * @brief Check if Floating Point Unit Invalid operation Interrupt source is enabled or disabled. + * @rmtoll SYSCFG_CFGR1 FPU_IE_0 LL_SYSCFG_IsEnabledIT_FPU_IOC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_IOC(void) +{ + return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_0) == (SYSCFG_CFGR1_FPU_IE_0)); +} + +/** + * @brief Check if Floating Point Unit Divide-by-zero Interrupt source is enabled or disabled. + * @rmtoll SYSCFG_CFGR1 FPU_IE_1 LL_SYSCFG_IsEnabledIT_FPU_DZC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_DZC(void) +{ + return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_1) == (SYSCFG_CFGR1_FPU_IE_1)); +} + +/** + * @brief Check if Floating Point Unit Underflow Interrupt source is enabled or disabled. + * @rmtoll SYSCFG_CFGR1 FPU_IE_2 LL_SYSCFG_IsEnabledIT_FPU_UFC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_UFC(void) +{ + return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_2) == (SYSCFG_CFGR1_FPU_IE_2)); +} + +/** + * @brief Check if Floating Point Unit Overflow Interrupt source is enabled or disabled. + * @rmtoll SYSCFG_CFGR1 FPU_IE_3 LL_SYSCFG_IsEnabledIT_FPU_OFC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_OFC(void) +{ + return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_3) == (SYSCFG_CFGR1_FPU_IE_3)); +} + +/** + * @brief Check if Floating Point Unit Input denormal Interrupt source is enabled or disabled. + * @rmtoll SYSCFG_CFGR1 FPU_IE_4 LL_SYSCFG_IsEnabledIT_FPU_IDC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_IDC(void) +{ + return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_4) == (SYSCFG_CFGR1_FPU_IE_4)); +} + +/** + * @brief Check if Floating Point Unit Inexact Interrupt source is enabled or disabled. + * @rmtoll SYSCFG_CFGR1 FPU_IE_5 LL_SYSCFG_IsEnabledIT_FPU_IXC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_IXC(void) +{ + return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_5) == (SYSCFG_CFGR1_FPU_IE_5)); +} + +/** + * @brief Configure source input for the EXTI external interrupt. + * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_SetEXTISource + * @param Port This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_PORTA + * @arg @ref LL_SYSCFG_EXTI_PORTB + * @arg @ref LL_SYSCFG_EXTI_PORTC + * @arg @ref LL_SYSCFG_EXTI_PORTD + * @arg @ref LL_SYSCFG_EXTI_PORTE + * @arg @ref LL_SYSCFG_EXTI_PORTF (*) + * @arg @ref LL_SYSCFG_EXTI_PORTG (*) + * @arg @ref LL_SYSCFG_EXTI_PORTH + * @arg @ref LL_SYSCFG_EXTI_PORTI (*) + * + * (*) value not defined in all devices + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_LINE0 + * @arg @ref LL_SYSCFG_EXTI_LINE1 + * @arg @ref LL_SYSCFG_EXTI_LINE2 + * @arg @ref LL_SYSCFG_EXTI_LINE3 + * @arg @ref LL_SYSCFG_EXTI_LINE4 + * @arg @ref LL_SYSCFG_EXTI_LINE5 + * @arg @ref LL_SYSCFG_EXTI_LINE6 + * @arg @ref LL_SYSCFG_EXTI_LINE7 + * @arg @ref LL_SYSCFG_EXTI_LINE8 + * @arg @ref LL_SYSCFG_EXTI_LINE9 + * @arg @ref LL_SYSCFG_EXTI_LINE10 + * @arg @ref LL_SYSCFG_EXTI_LINE11 + * @arg @ref LL_SYSCFG_EXTI_LINE12 + * @arg @ref LL_SYSCFG_EXTI_LINE13 + * @arg @ref LL_SYSCFG_EXTI_LINE14 + * @arg @ref LL_SYSCFG_EXTI_LINE15 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line) +{ + MODIFY_REG(SYSCFG->EXTICR[Line & 0x03U], (Line >> LL_EXTI_REGISTER_PINPOS_SHFT), Port << POSITION_VAL((Line >> LL_EXTI_REGISTER_PINPOS_SHFT))); +} + +/** + * @brief Get the configured defined for specific EXTI Line + * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_GetEXTISource + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_LINE0 + * @arg @ref LL_SYSCFG_EXTI_LINE1 + * @arg @ref LL_SYSCFG_EXTI_LINE2 + * @arg @ref LL_SYSCFG_EXTI_LINE3 + * @arg @ref LL_SYSCFG_EXTI_LINE4 + * @arg @ref LL_SYSCFG_EXTI_LINE5 + * @arg @ref LL_SYSCFG_EXTI_LINE6 + * @arg @ref LL_SYSCFG_EXTI_LINE7 + * @arg @ref LL_SYSCFG_EXTI_LINE8 + * @arg @ref LL_SYSCFG_EXTI_LINE9 + * @arg @ref LL_SYSCFG_EXTI_LINE10 + * @arg @ref LL_SYSCFG_EXTI_LINE11 + * @arg @ref LL_SYSCFG_EXTI_LINE12 + * @arg @ref LL_SYSCFG_EXTI_LINE13 + * @arg @ref LL_SYSCFG_EXTI_LINE14 + * @arg @ref LL_SYSCFG_EXTI_LINE15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_PORTA + * @arg @ref LL_SYSCFG_EXTI_PORTB + * @arg @ref LL_SYSCFG_EXTI_PORTC + * @arg @ref LL_SYSCFG_EXTI_PORTD + * @arg @ref LL_SYSCFG_EXTI_PORTE + * @arg @ref LL_SYSCFG_EXTI_PORTF (*) + * @arg @ref LL_SYSCFG_EXTI_PORTG (*) + * @arg @ref LL_SYSCFG_EXTI_PORTH + * @arg @ref LL_SYSCFG_EXTI_PORTI (*) + * + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line) +{ + return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0x03U], (Line >> LL_EXTI_REGISTER_PINPOS_SHFT)) >> POSITION_VAL(Line >> LL_EXTI_REGISTER_PINPOS_SHFT)); +} + +/** + * @brief Enable SRAM2 Erase (starts a hardware SRAM2 erase operation. This bit is + * automatically cleared at the end of the SRAM2 erase operation.) + * @note This bit is write-protected: setting this bit is possible only after the + * correct key sequence is written in the SYSCFG_SKR register as described in + * the Reference Manual. + * @rmtoll SYSCFG_SCSR SRAM2ER LL_SYSCFG_EnableSRAM2Erase + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableSRAM2Erase(void) +{ + /* Starts a hardware SRAM2 erase operation*/ + SET_BIT(SYSCFG->SCSR, SYSCFG_SCSR_SRAM2ER); +} + +/** + * @brief Check if SRAM2 erase operation is on going + * @rmtoll SYSCFG_SCSR SRAM2BSY LL_SYSCFG_IsSRAM2EraseOngoing + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsSRAM2EraseOngoing(void) +{ + return (READ_BIT(SYSCFG->SCSR, SYSCFG_SCSR_SRAM2BSY) == (SYSCFG_SCSR_SRAM2BSY)); +} + +/** + * @brief Set connections to TIM1/8/15/16/17 Break inputs + * @rmtoll SYSCFG_CFGR2 CLL LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR2 SPL LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR2 PVDL LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR2 ECCL LL_SYSCFG_SetTIMBreakInputs + * @param Break This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_TIMBREAK_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_PVD + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM2_PARITY + * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break) +{ + MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_PVDL | SYSCFG_CFGR2_ECCL, Break); +} + +/** + * @brief Get connections to TIM1/8/15/16/17 Break inputs + * @rmtoll SYSCFG_CFGR2 CLL LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR2 SPL LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR2 PVDL LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR2 ECCL LL_SYSCFG_GetTIMBreakInputs + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_SYSCFG_TIMBREAK_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_PVD + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM2_PARITY + * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_PVDL | SYSCFG_CFGR2_ECCL)); +} + +/** + * @brief Check if SRAM2 parity error detected + * @rmtoll SYSCFG_CFGR2 SPF LL_SYSCFG_IsActiveFlag_SP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SP(void) +{ + return (READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF) == (SYSCFG_CFGR2_SPF)); +} + +/** + * @brief Clear SRAM2 parity error flag + * @rmtoll SYSCFG_CFGR2 SPF LL_SYSCFG_ClearFlag_SP + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_ClearFlag_SP(void) +{ + SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF); +} + +/** + * @brief Enable SRAM2 page write protection for Pages in range 0 to 31 + * @note Write protection is cleared only by a system reset + * @rmtoll SYSCFG_SWPR PxWP LL_SYSCFG_EnableSRAM2PageWRP_0_31 + * @param SRAM2WRP This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE0 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE1 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE2 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE3 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE4 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE5 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE6 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE7 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE8 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE9 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE10 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE11 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE12 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE13 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE14 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE15 + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE16 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE17 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE18 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE19 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE20 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE21 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE22 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE23 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE24 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE25 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE26 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE27 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE28 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE29 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE30 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE31 (*) + * + * (*) value not defined in all devices + * @retval None + */ +/* Legacy define */ +#define LL_SYSCFG_EnableSRAM2PageWRP LL_SYSCFG_EnableSRAM2PageWRP_0_31 +__STATIC_INLINE void LL_SYSCFG_EnableSRAM2PageWRP_0_31(uint32_t SRAM2WRP) +{ + SET_BIT(SYSCFG->SWPR, SRAM2WRP); +} + +#if defined(SYSCFG_SWPR2_PAGE63) +/** + * @brief Enable SRAM2 page write protection for Pages in range 32 to 63 + * @note Write protection is cleared only by a system reset + * @rmtoll SYSCFG_SWPR2 PxWP LL_SYSCFG_EnableSRAM2PageWRP_32_63 + * @param SRAM2WRP This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE32 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE33 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE34 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE35 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE36 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE37 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE38 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE39 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE40 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE41 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE42 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE43 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE44 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE45 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE46 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE47 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE48 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE49 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE50 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE51 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE52 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE53 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE54 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE55 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE56 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE57 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE58 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE59 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE60 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE61 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE62 (*) + * @arg @ref LL_SYSCFG_SRAM2WRP_PAGE63 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableSRAM2PageWRP_32_63(uint32_t SRAM2WRP) +{ + SET_BIT(SYSCFG->SWPR2, SRAM2WRP); +} +#endif /* SYSCFG_SWPR2_PAGE63 */ + +/** + * @brief SRAM2 page write protection lock prior to erase + * @rmtoll SYSCFG_SKR KEY LL_SYSCFG_LockSRAM2WRP + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_LockSRAM2WRP(void) +{ + /* Writing a wrong key reactivates the write protection */ + WRITE_REG(SYSCFG->SKR, 0x00); +} + +/** + * @brief SRAM2 page write protection unlock prior to erase + * @rmtoll SYSCFG_SKR KEY LL_SYSCFG_UnlockSRAM2WRP + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_UnlockSRAM2WRP(void) +{ + /* unlock the write protection of the SRAM2ER bit */ + WRITE_REG(SYSCFG->SKR, 0xCA); + WRITE_REG(SYSCFG->SKR, 0x53); +} + +/** + * @} + */ + + +/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU + * @{ + */ + +/** + * @brief Return the device identifier + * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF (ex: device ID is 0x6415) + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID)); +} + +/** + * @brief Return the device revision identifier + * @note This field indicates the revision of the device. + * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos); +} + +/** + * @brief Enable the Debug Module during SLEEP mode + * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during SLEEP mode + * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Set Trace pin assignment control + * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n + * DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment + * @param PinAssignment This parameter can be one of the following values: + * @arg @ref LL_DBGMCU_TRACE_NONE + * @arg @ref LL_DBGMCU_TRACE_ASYNCH + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment) +{ + MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment); +} + +/** + * @brief Get Trace pin assignment control + * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n + * DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment + * @retval Returned value can be one of the following values: + * @arg @ref LL_DBGMCU_TRACE_NONE + * @arg @ref LL_DBGMCU_TRACE_ASYNCH + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 + * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE)); +} + +/** + * @brief Freeze APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB1FZR1 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB1FZR1, Periphs); +} + +/** + * @brief Freeze APB1 peripherals (group2 peripherals) + * @rmtoll DBGMCU_APB1FZR2 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP2_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP2_I2C4_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP2_LPTIM2_STOP + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB1FZR2, Periphs); +} + +/** + * @brief Unfreeze APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB1FZR1 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB1FZR1, Periphs); +} + +/** + * @brief Unfreeze APB1 peripherals (group2 peripherals) + * @rmtoll DBGMCU_APB1FZR2 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP2_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP2_I2C4_STOP (*) + * @arg @ref LL_DBGMCU_APB1_GRP2_LPTIM2_STOP + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB1FZR2, Periphs); +} + +/** + * @brief Freeze APB2 peripherals + * @rmtoll DBGMCU_APB2FZ DBG_TIMx_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB2FZ, Periphs); +} + +/** + * @brief Unfreeze APB2 peripherals + * @rmtoll DBGMCU_APB2FZ DBG_TIMx_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB2FZ, Periphs); +} + +/** + * @} + */ + +#if defined(VREFBUF) +/** @defgroup SYSTEM_LL_EF_VREFBUF VREFBUF + * @{ + */ + +/** + * @brief Enable Internal voltage reference + * @rmtoll VREFBUF_CSR ENVR LL_VREFBUF_Enable + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_Enable(void) +{ + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} + +/** + * @brief Disable Internal voltage reference + * @rmtoll VREFBUF_CSR ENVR LL_VREFBUF_Disable + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_Disable(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} + +/** + * @brief Enable high impedance (VREF+pin is high impedance) + * @rmtoll VREFBUF_CSR HIZ LL_VREFBUF_EnableHIZ + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_EnableHIZ(void) +{ + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_HIZ); +} + +/** + * @brief Disable high impedance (VREF+pin is internally connected to the voltage reference buffer output) + * @rmtoll VREFBUF_CSR HIZ LL_VREFBUF_DisableHIZ + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_DisableHIZ(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_HIZ); +} + +/** + * @brief Set the Voltage reference scale + * @rmtoll VREFBUF_CSR VRS LL_VREFBUF_SetVoltageScaling + * @param Scale This parameter can be one of the following values: + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE0 + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE1 + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_SetVoltageScaling(uint32_t Scale) +{ + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, Scale); +} + +/** + * @brief Get the Voltage reference scale + * @rmtoll VREFBUF_CSR VRS LL_VREFBUF_GetVoltageScaling + * @retval Returned value can be one of the following values: + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE0 + * @arg @ref LL_VREFBUF_VOLTAGE_SCALE1 + */ +__STATIC_INLINE uint32_t LL_VREFBUF_GetVoltageScaling(void) +{ + return (uint32_t)(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRS)); +} + +/** + * @brief Check if Voltage reference buffer is ready + * @rmtoll VREFBUF_CSR VRR LL_VREFBUF_IsVREFReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_VREFBUF_IsVREFReady(void) +{ + return (READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == (VREFBUF_CSR_VRR)); +} + +/** + * @brief Get the trimming code for VREFBUF calibration + * @rmtoll VREFBUF_CCR TRIM LL_VREFBUF_GetTrimming + * @retval Between 0 and 0x3F + */ +__STATIC_INLINE uint32_t LL_VREFBUF_GetTrimming(void) +{ + return (uint32_t)(READ_BIT(VREFBUF->CCR, VREFBUF_CCR_TRIM)); +} + +/** + * @brief Set the trimming code for VREFBUF calibration (Tune the internal reference buffer voltage) + * @rmtoll VREFBUF_CCR TRIM LL_VREFBUF_SetTrimming + * @param Value Between 0 and 0x3F + * @retval None + */ +__STATIC_INLINE void LL_VREFBUF_SetTrimming(uint32_t Value) +{ + WRITE_REG(VREFBUF->CCR, Value); +} + +/** + * @} + */ +#endif /* VREFBUF */ + +/** @defgroup SYSTEM_LL_EF_FLASH FLASH + * @{ + */ + +/** + * @brief Set FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency + * @param Latency This parameter can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + * @arg @ref LL_FLASH_LATENCY_3 + * @arg @ref LL_FLASH_LATENCY_4 + * @arg @ref LL_FLASH_LATENCY_5 (*) + * @arg @ref LL_FLASH_LATENCY_6 (*) + * @arg @ref LL_FLASH_LATENCY_7 (*) + * @arg @ref LL_FLASH_LATENCY_8 (*) + * @arg @ref LL_FLASH_LATENCY_9 (*) + * @arg @ref LL_FLASH_LATENCY_10 (*) + * @arg @ref LL_FLASH_LATENCY_11 (*) + * @arg @ref LL_FLASH_LATENCY_12 (*) + * @arg @ref LL_FLASH_LATENCY_13 (*) + * @arg @ref LL_FLASH_LATENCY_14 (*) + * @arg @ref LL_FLASH_LATENCY_15 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) +{ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); +} + +/** + * @brief Get FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency + * @retval Returned value can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + * @arg @ref LL_FLASH_LATENCY_3 + * @arg @ref LL_FLASH_LATENCY_4 + * @arg @ref LL_FLASH_LATENCY_5 (*) + * @arg @ref LL_FLASH_LATENCY_6 (*) + * @arg @ref LL_FLASH_LATENCY_7 (*) + * @arg @ref LL_FLASH_LATENCY_8 (*) + * @arg @ref LL_FLASH_LATENCY_9 (*) + * @arg @ref LL_FLASH_LATENCY_10 (*) + * @arg @ref LL_FLASH_LATENCY_11 (*) + * @arg @ref LL_FLASH_LATENCY_12 (*) + * @arg @ref LL_FLASH_LATENCY_13 (*) + * @arg @ref LL_FLASH_LATENCY_14 (*) + * @arg @ref LL_FLASH_LATENCY_15 (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) +{ + return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); +} + +/** + * @brief Enable Prefetch + * @rmtoll FLASH_ACR PRFTEN LL_FLASH_EnablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnablePrefetch(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); +} + +/** + * @brief Disable Prefetch + * @rmtoll FLASH_ACR PRFTEN LL_FLASH_DisablePrefetch + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisablePrefetch(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN); +} + +/** + * @brief Check if Prefetch buffer is enabled + * @rmtoll FLASH_ACR PRFTEN LL_FLASH_IsPrefetchEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void) +{ + return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN)); +} + +/** + * @brief Enable Instruction cache + * @rmtoll FLASH_ACR ICEN LL_FLASH_EnableInstCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableInstCache(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_ICEN); +} + +/** + * @brief Disable Instruction cache + * @rmtoll FLASH_ACR ICEN LL_FLASH_DisableInstCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableInstCache(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN); +} + +/** + * @brief Enable Data cache + * @rmtoll FLASH_ACR DCEN LL_FLASH_EnableDataCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableDataCache(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_DCEN); +} + +/** + * @brief Disable Data cache + * @rmtoll FLASH_ACR DCEN LL_FLASH_DisableDataCache + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableDataCache(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN); +} + +/** + * @brief Enable Instruction cache reset + * @note bit can be written only when the instruction cache is disabled + * @rmtoll FLASH_ACR ICRST LL_FLASH_EnableInstCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableInstCacheReset(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); +} + +/** + * @brief Disable Instruction cache reset + * @rmtoll FLASH_ACR ICRST LL_FLASH_DisableInstCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableInstCacheReset(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); +} + +/** + * @brief Enable Data cache reset + * @note bit can be written only when the data cache is disabled + * @rmtoll FLASH_ACR DCRST LL_FLASH_EnableDataCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableDataCacheReset(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_DCRST); +} + +/** + * @brief Disable Data cache reset + * @rmtoll FLASH_ACR DCRST LL_FLASH_DisableDataCacheReset + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableDataCacheReset(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST); +} + +/** + * @brief Enable Flash Power-down mode during run mode or Low-power run mode + * @note Flash memory can be put in power-down mode only when the code is executed + * from RAM + * @note Flash must not be accessed when power down is enabled + * @note Flash must not be put in power-down while a program or an erase operation + * is on-going + * @rmtoll FLASH_ACR RUN_PD LL_FLASH_EnableRunPowerDown\n + * FLASH_PDKEYR PDKEY1 LL_FLASH_EnableRunPowerDown\n + * FLASH_PDKEYR PDKEY2 LL_FLASH_EnableRunPowerDown + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableRunPowerDown(void) +{ + /* Following values must be written consecutively to unlock the RUN_PD bit in + FLASH_ACR */ + WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); + WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); + SET_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); +} + +/** + * @brief Disable Flash Power-down mode during run mode or Low-power run mode + * @rmtoll FLASH_ACR RUN_PD LL_FLASH_DisableRunPowerDown\n + * FLASH_PDKEYR PDKEY1 LL_FLASH_DisableRunPowerDown\n + * FLASH_PDKEYR PDKEY2 LL_FLASH_DisableRunPowerDown + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableRunPowerDown(void) +{ + /* Following values must be written consecutively to unlock the RUN_PD bit in + FLASH_ACR */ + WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); + WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); + CLEAR_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); +} + +/** + * @brief Enable Flash Power-down mode during Sleep or Low-power sleep mode + * @note Flash must not be put in power-down while a program or an erase operation + * is on-going + * @rmtoll FLASH_ACR SLEEP_PD LL_FLASH_EnableSleepPowerDown + * @retval None + */ +__STATIC_INLINE void LL_FLASH_EnableSleepPowerDown(void) +{ + SET_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD); +} + +/** + * @brief Disable Flash Power-down mode during Sleep or Low-power sleep mode + * @rmtoll FLASH_ACR SLEEP_PD LL_FLASH_DisableSleepPowerDown + * @retval None + */ +__STATIC_INLINE void LL_FLASH_DisableSleepPowerDown(void) +{ + CLEAR_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) || defined (VREFBUF) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_SYSTEM_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_usart.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_usart.h new file mode 100644 index 0000000..322bd2f --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_usart.h @@ -0,0 +1,4699 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_usart.h + * @author MCD Application Team + * @brief Header file of USART LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_USART_H +#define STM32L4xx_LL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +#if defined(USART1) || defined(USART2) || defined(USART3) || defined(UART4) || defined(UART5) + +/** @defgroup USART_LL USART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +#if defined(USART_PRESC_PRESCALER) +/** @defgroup USART_LL_Private_Variables USART Private Variables + * @{ + */ +/* Array used to get the USART prescaler division decimal values versus @ref USART_LL_EC_PRESCALER values */ +static const uint32_t USART_PRESCALER_TAB[] = +{ + 1UL, + 2UL, + 4UL, + 6UL, + 8UL, + 10UL, + 12UL, + 16UL, + 32UL, + 64UL, + 128UL, + 256UL +}; +/** + * @} + */ +#endif /* USART_PRESC_PRESCALER */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Constants USART Private Constants + * @{ + */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_Private_Macros USART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_ES_INIT USART Exported Init structures + * @{ + */ + +/** + * @brief LL USART Init Structure definition + */ +typedef struct +{ +#if defined(USART_PRESC_PRESCALER) + uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. + This parameter can be a value of @ref USART_LL_EC_PRESCALER. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetPrescaler().*/ +#endif /* USART_PRESC_PRESCALER */ + + uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetHWFlowCtrl().*/ + + uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8. + This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetOverSampling().*/ + +} LL_USART_InitTypeDef; + +/** + * @brief LL USART Clock Init Structure definition + */ +typedef struct +{ + uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_CLOCK. + + USART HW configuration can be modified afterwards using unitary functions + @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput(). + For more details, refer to description of this function. */ + + uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_LL_EC_POLARITY. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPolarity(). + For more details, refer to description of this function. */ + + uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_LL_EC_PHASE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPhase(). + For more details, refer to description of this function. */ + + uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetLastClkPulseOutput(). + For more details, refer to description of this function. */ + +} LL_USART_ClockInitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_USART_WriteReg function + * @{ + */ +#define LL_USART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */ +#define LL_USART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */ +#define LL_USART_ICR_NECF USART_ICR_NECF /*!< Noise error detected clear flag */ +#define LL_USART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */ +#define LL_USART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */ +#if defined(USART_CR1_FIFOEN) +#define LL_USART_ICR_TXFECF USART_ICR_TXFECF /*!< TX FIFO Empty clear flag */ +#endif /* USART_CR1_FIFOEN */ +#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */ +#if defined(USART_TCBGT_SUPPORT) +#define LL_USART_ICR_TCBGTCF USART_ICR_TCBGTCF /*!< Transmission completed before guard time clear flag */ +#endif /* USART_TCBGT_SUPPORT */ +#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection clear flag */ +#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */ +#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout clear flag */ +#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block clear flag */ +#if defined(USART_CR2_SLVEN) +#define LL_USART_ICR_UDRCF USART_ICR_UDRCF /*!< SPI Slave Underrun clear flag */ +#endif /* USART_CR2_SLVEN */ +#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */ +#define LL_USART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_USART_ReadReg function + * @{ + */ +#define LL_USART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_USART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_USART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_USART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_USART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#if defined(USART_CR1_FIFOEN) +#define LL_USART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */ +#else +#define LL_USART_ISR_RXNE USART_ISR_RXNE /*!< Read data register not empty flag */ +#endif /* USART_CR1_FIFOEN */ +#define LL_USART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#if defined(USART_CR1_FIFOEN) +#define LL_USART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/ +#else +#define LL_USART_ISR_TXE USART_ISR_TXE /*!< Transmit data register empty flag */ +#endif /* USART_CR1_FIFOEN */ +#define LL_USART_ISR_LBDF USART_ISR_LBDF /*!< LIN break detection flag */ +#define LL_USART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_USART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_USART_ISR_RTOF USART_ISR_RTOF /*!< Receiver timeout flag */ +#define LL_USART_ISR_EOBF USART_ISR_EOBF /*!< End of block flag */ +#if defined(USART_CR2_SLVEN) +#define LL_USART_ISR_UDR USART_ISR_UDR /*!< SPI Slave underrun error flag */ +#endif /* USART_CR2_SLVEN */ +#define LL_USART_ISR_ABRE USART_ISR_ABRE /*!< Auto baud rate error flag */ +#define LL_USART_ISR_ABRF USART_ISR_ABRF /*!< Auto baud rate flag */ +#define LL_USART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_USART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_USART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_USART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#define LL_USART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#define LL_USART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_USART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +#if defined(USART_CR1_FIFOEN) +#define LL_USART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */ +#define LL_USART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */ +#endif /* USART_CR1_FIFOEN */ +#if defined(USART_TCBGT_SUPPORT) +#define LL_USART_ISR_TCBGT USART_ISR_TCBGT /*!< Transmission complete before guard time completion flag */ +#endif /* USART_TCBGT_SUPPORT */ +#if defined(USART_CR1_FIFOEN) +#define LL_USART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */ +#define LL_USART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */ +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions + * @{ + */ +#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#if defined(USART_CR1_FIFOEN) +#define LL_USART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty interrupt enable */ +#else +#define LL_USART_CR1_RXNEIE USART_CR1_RXNEIE /*!< Read data register not empty interrupt enable */ +#endif /* USART_CR1_FIFOEN */ +#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#if defined(USART_CR1_FIFOEN) +#define LL_USART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO not full interrupt enable */ +#else +#define LL_USART_CR1_TXEIE USART_CR1_TXEIE /*!< Transmit data register empty interrupt enable */ +#endif /* USART_CR1_FIFOEN */ +#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_USART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#define LL_USART_CR1_RTOIE USART_CR1_RTOIE /*!< Receiver timeout interrupt enable */ +#define LL_USART_CR1_EOBIE USART_CR1_EOBIE /*!< End of Block interrupt enable */ +#if defined(USART_CR1_FIFOEN) +#define LL_USART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */ +#define LL_USART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */ +#endif /* USART_CR1_FIFOEN */ +#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */ +#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#define LL_USART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#if defined(USART_CR1_FIFOEN) +#define LL_USART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */ +#endif /* USART_CR1_FIFOEN */ +#if defined(USART_TCBGT_SUPPORT) +#define LL_USART_CR3_TCBGTIE USART_CR3_TCBGTIE /*!< Transmission complete before guard time interrupt enable */ +#endif /* USART_TCBGT_SUPPORT */ +#if defined(USART_CR1_FIFOEN) +#define LL_USART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */ +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +#if defined(USART_CR1_FIFOEN) +/** @defgroup USART_LL_EC_FIFOTHRESHOLD FIFO Threshold + * @{ + */ +#define LL_USART_FIFOTHRESHOLD_1_8 0x00000000U /*!< FIFO reaches 1/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_4 0x00000001U /*!< FIFO reaches 1/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_2 0x00000002U /*!< FIFO reaches 1/2 of its depth */ +#define LL_USART_FIFOTHRESHOLD_3_4 0x00000003U /*!< FIFO reaches 3/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_7_8 0x00000004U /*!< FIFO reaches 7/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_8_8 0x00000005U /*!< FIFO becomes empty for TX and full for RX */ +/** + * @} + */ + +#endif /* USART_CR1_FIFOEN */ +/** @defgroup USART_LL_EC_DIRECTION Communication Direction + * @{ + */ +#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */ +#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_USART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling + * @{ + */ +#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EC_CLOCK Clock Signal + * @{ + */ + +#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */ +#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse + * @{ + */ +#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */ +#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */ +#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/ +#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */ +/** + * @} + */ + +#if defined(USART_PRESC_PRESCALER) +/** @defgroup USART_LL_EC_PRESCALER Clock Source Prescaler + * @{ + */ +#define LL_USART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_USART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_USART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_USART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_USART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_USART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_USART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_USART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_USART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_USART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_USART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_USART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ +/** + * @} + */ + +#endif /* USART_PRESC_PRESCALER */ +/** @defgroup USART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */ +#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */ +#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_USART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_USART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_USART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_USART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_USART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_USART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_USART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received in positive/direct logic. (1=H, 0=L) */ +#define LL_USART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received in negative/inverse logic. (1=L, 0=H). The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_USART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, following the start bit */ +#define LL_USART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, following the start bit */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_AUTOBAUD_DETECT_ON Autobaud Detection + * @{ + */ +#define LL_USART_AUTOBAUD_DETECT_ON_STARTBIT 0x00000000U /*!< Measurement of the start bit is used to detect the baud rate */ +#define LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE USART_CR2_ABRMODE_0 /*!< Falling edge to falling edge measurement. Received frame must start with a single bit = 1 -> Frame = Start10xxxxxx */ +#define LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME USART_CR2_ABRMODE_1 /*!< 0x7F frame detection */ +#define LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (USART_CR2_ABRMODE_1 | USART_CR2_ABRMODE_0) /*!< 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_USART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_USART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */ +#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */ +#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_USART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_USART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_USART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power + * @{ + */ +#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */ +#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length + * @{ + */ +#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */ +#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_USART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_USART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_USART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_USART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Macros USART Exported Macros + * @{ + */ + +/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper + * @{ + */ + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + @if USART_PRESC_PRESCALER + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + @endif + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case + */ +#if defined(USART_PRESC_PRESCALER) +#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \ + (((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))*2U)\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) +#else +#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) ((((__PERIPHCLK__)*2U)\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) +#endif /* USART_PRESC_PRESCALER */ + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + @if USART_PRESC_PRESCALER + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + @endif + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case + */ +#if defined(USART_PRESC_PRESCALER) +#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \ + ((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) +#else +#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (((__PERIPHCLK__) + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) +#endif /* USART_PRESC_PRESCALER */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_LL_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief USART Enable + * @rmtoll CR1 UE LL_USART_Enable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief USART Disable (all USART prescalers and outputs are disabled) + * @note When USART is disabled, USART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the USART is kept, but all the status + * flags, in the USARTx_ISR are set to their default values. + * @rmtoll CR1 UE LL_USART_Disable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if USART is enabled + * @rmtoll CR1 UE LL_USART_IsEnabled + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabled(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief FIFO Mode Enable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_EnableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableFIFO(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief FIFO Mode Disable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_DisableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableFIFO(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief Indicate if FIFO Mode is enabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_IsEnabledFIFO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledFIFO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_FIFOEN) == (USART_CR1_FIFOEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure TX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_SetTXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Return TX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_GetTXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetTXFIFOThreshold(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Configure RX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_SetRXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Return RX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_GetRXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetRXFIFOThreshold(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Configure TX and RX FIFOs Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_ConfigFIFOsThreshold\n + * CR3 RXFTCFG LL_USART_ConfigFIFOsThreshold + * @param USARTx USART Instance + * @param TXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @param RXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigFIFOsThreshold(USART_TypeDef *USARTx, uint32_t TXThreshold, uint32_t RXThreshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | + (RXThreshold << USART_CR3_RXFTCFG_Pos)); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief USART enabled in STOP Mode. + * @note When this function is enabled, USART is able to wake up the MCU from Stop mode, provided that + * USART clock selection is HSI or LSE in RCC. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_EnableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief USART disabled in STOP Mode. + * @note When this function is disabled, USART is not able to wake up the MCU from Stop mode + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_DisableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if USART is enabled in STOP Mode (able to wake up MCU from Stop mode or not) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_IsEnabledInStopMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledInStopMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +#if defined(USART_CR3_UCESM) +/** + * @brief USART Clock enabled in STOP Mode + * @note When this function is called, USART Clock is enabled while in STOP mode + * @rmtoll CR3 UCESM LL_USART_EnableClockInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableClockInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_UCESM); +} + +/** + * @brief USART clock disabled in STOP Mode + * @note When this function is called, USART Clock is disabled while in STOP mode + * @rmtoll CR3 UCESM LL_USART_DisableClockInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableClockInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_UCESM); +} + +/** + * @brief Indicate if USART clock is enabled in STOP Mode + * @rmtoll CR3 UCESM LL_USART_IsClockEnabledInStopMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsClockEnabledInStopMode(const USART_TypeDef *USARTx) +{ + return (READ_BIT(USARTx->CR3, USART_CR3_UCESM) == (USART_CR3_UCESM)); +} + +#endif /* USART_CR3_UCESM */ +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_USART_EnableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_USART_DisableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_USART_EnableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_USART_DisableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_SetTransferDirection\n + * CR1 TE LL_USART_SetTransferDirection + * @param USARTx USART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) +{ + ATOMIC_MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_GetTransferDirection\n + * CR1 TE LL_USART_GetTransferDirection + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled). + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (9th or 8th bit depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_USART_SetParity\n + * CR1 PCE LL_USART_SetParity + * @param USARTx USART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_USART_GetParity\n + * CR1 PCE LL_USART_GetParity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_USART_GetParity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod + * @param USARTx USART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_SetDataWidth\n + * CR1 M1 LL_USART_SetDataWidth + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_GetDataWidth\n + * CR1 M1 LL_USART_GetDataWidth + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_USART_GetDataWidth(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_USART_EnableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_USART_DisableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_USART_IsEnabledMuteMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledMuteMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +/** + * @brief Set Oversampling to 8-bit or 16-bit mode + * @rmtoll CR1 OVER8 LL_USART_SetOverSampling + * @param USARTx USART Instance + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling); +} + +/** + * @brief Return Oversampling mode + * @rmtoll CR1 OVER8 LL_USART_GetOverSampling + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetOverSampling(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8)); +} + +/** + * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput + * @param USARTx USART Instance + * @param LastBitClockPulse This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse); +} + +/** + * @brief Retrieve Clock pulse of the last data bit output configuration + * (Last bit Clock pulse output to the SCLK pin or not) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + */ +__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL)); +} + +/** + * @brief Select the phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_SetClockPhase + * @param USARTx USART Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase); +} + +/** + * @brief Return phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_GetClockPhase + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPhase(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA)); +} + +/** + * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_SetClockPolarity + * @param USARTx USART Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity); +} + +/** + * @brief Return polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_GetClockPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL)); +} + +/** + * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function + * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function + * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function + * @rmtoll CR2 CPHA LL_USART_ConfigClock\n + * CR2 CPOL LL_USART_ConfigClock\n + * CR2 LBCL LL_USART_ConfigClock + * @param USARTx USART Instance + * @param Phase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @param LBCPOutput This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput); +} + +#if defined(USART_PRESC_PRESCALER) +/** + * @brief Configure Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_SetPrescaler + * @param USARTx USART Instance + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->PRESC, USART_PRESC_PRESCALER, (uint16_t)PrescalerValue); +} + +/** + * @brief Retrieve the Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_GetPrescaler + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_USART_GetPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->PRESC, USART_PRESC_PRESCALER)); +} + +#endif /* USART_PRESC_PRESCALER */ +/** + * @brief Enable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Disable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Indicate if Clock output on SCLK pin is enabled + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN)) ? 1UL : 0UL); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_USART_SetStopBitsLength + * @param USARTx USART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_USART_GetStopBitsLength + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_USART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_USART_SetParity() function + * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_USART_ConfigCharacter\n + * CR1 PCE LL_USART_ConfigCharacter\n + * CR1 M0 LL_USART_ConfigCharacter\n + * CR1 M1 LL_USART_ConfigCharacter\n + * CR2 STOP LL_USART_ConfigCharacter + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap + * @param USARTx USART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXRXSwap(USART_TypeDef *USARTx, uint32_t SwapConfig) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_USART_GetTXRXSwap + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXRXSwap(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_USART_GetRXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetRXPinLevel(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_USART_GetTXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXPinLevel(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_USART_SetBinaryDataLogic + * @param USARTx USART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBinaryDataLogic(USART_TypeDef *USARTx, uint32_t DataLogic) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_USART_GetBinaryDataLogic + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_USART_GetBinaryDataLogic(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_SetTransferBitOrder + * @param USARTx USART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferBitOrder(USART_TypeDef *USARTx, uint32_t BitOrder) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_GetTransferBitOrder + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferBitOrder(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Enable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_EnableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Disable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_DisableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableAutoBaudRate(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Indicate if Auto Baud-Rate Detection mechanism is enabled + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_IsEnabledAutoBaud + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledAutoBaud(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_ABREN) == (USART_CR2_ABREN)) ? 1UL : 0UL); +} + +/** + * @brief Set Auto Baud-Rate mode bits + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_SetAutoBaudRateMode + * @param USARTx USART Instance + * @param AutoBaudRateMode This parameter can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + * @retval None + */ +__STATIC_INLINE void LL_USART_SetAutoBaudRateMode(USART_TypeDef *USARTx, uint32_t AutoBaudRateMode) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ABRMODE, AutoBaudRateMode); +} + +/** + * @brief Return Auto Baud-Rate mode + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_GetAutoBaudRateMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + */ +__STATIC_INLINE uint32_t LL_USART_GetAutoBaudRateMode(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ABRMODE)); +} + +/** + * @brief Enable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_EnableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRxTimeout(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Disable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_DisableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRxTimeout(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Indicate if Receiver Timeout feature is enabled + * @rmtoll CR2 RTOEN LL_USART_IsEnabledRxTimeout + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledRxTimeout(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_RTOEN) == (USART_CR2_RTOEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Address of the USART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_USART_ConfigNodeAddress\n + * CR2 ADDM7 LL_USART_ConfigNodeAddress + * @param USARTx USART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the USART node. + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigNodeAddress(USART_TypeDef *USARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the USART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_USART_GetNodeAddress + * @param USARTx USART Instance + * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_USART_GetNodeAddressLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddressLen(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n + * CR3 CTSE LL_USART_SetHWFlowCtrl + * @param USARTx USART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n + * CR3 CTSE LL_USART_GetHWFlowCtrl + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Disable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Indicate if One bit sampling method is enabled + * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)) ? 1UL : 0UL); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_EnableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOverrunDetect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_DisableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOverrunDetect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_USART_IsEnabledOverrunDetect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOverrunDetect(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_SetWKUPType + * @param USARTx USART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWKUPType(USART_TypeDef *USARTx, uint32_t Type) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_GetWKUPType + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_USART_GetWKUPType(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_WUS)); +} + +/** + * @brief Configure USART BRR register for achieving expected Baud Rate value. + * @note Compute and set USARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values + * @note Peripheral clock and Baud rate values provided as function parameters should be valid + * (Baud rate value != 0) + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_SetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + @if USART_PRESC_PRESCALER + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + @endif + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @param BaudRate Baud Rate + * @retval None + */ +#if defined(USART_PRESC_PRESCALER) +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling, + uint32_t BaudRate) +#else +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling, + uint32_t BaudRate) +#endif /* USART_PRESC_PRESCALER */ +{ + uint32_t usartdiv; + uint32_t brrtemp; + +#if defined(USART_PRESC_PRESCALER) + if (PrescalerValue > LL_USART_PRESCALER_DIV256) + { + /* Do not overstep the size of USART_PRESCALER_TAB */ + } + else if (BaudRate == 0U) + { + /* Can Not divide per 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) +#else + if (OverSampling == LL_USART_OVERSAMPLING_8) +#endif /* USART_PRESC_PRESCALER */ + { +#if defined(USART_PRESC_PRESCALER) + usartdiv = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); +#else + usartdiv = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, BaudRate)); +#endif /* USART_PRESC_PRESCALER */ + brrtemp = usartdiv & 0xFFF0U; + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + USARTx->BRR = brrtemp; + } + else + { +#if defined(USART_PRESC_PRESCALER) + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); +#else + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, BaudRate)); +#endif /* USART_PRESC_PRESCALER */ + } +} + +/** + * @brief Return current Baud Rate value, according to USARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock and Oversampling mode values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_GetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + @if USART_PRESC_PRESCALER + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + @endif + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval Baud Rate + */ +#if defined(USART_PRESC_PRESCALER) +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(const USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling) +#else +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(const USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling) +#endif /* USART_PRESC_PRESCALER */ +{ + uint32_t usartdiv; + uint32_t brrresult = 0x0U; +#if defined(USART_PRESC_PRESCALER) + uint32_t periphclkpresc = (uint32_t)(PeriphClk / (USART_PRESCALER_TAB[(uint8_t)PrescalerValue])); +#endif /* USART_PRESC_PRESCALER */ + + usartdiv = USARTx->BRR; + + if (usartdiv == 0U) + { + /* Do not perform a division by 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ; + if (usartdiv != 0U) + { +#if defined(USART_PRESC_PRESCALER) + brrresult = (periphclkpresc * 2U) / usartdiv; +#else + brrresult = (PeriphClk * 2U) / usartdiv; +#endif /* USART_PRESC_PRESCALER */ + } + } + else + { + if ((usartdiv & 0xFFFFU) != 0U) + { +#if defined(USART_PRESC_PRESCALER) + brrresult = periphclkpresc / usartdiv; +#else + brrresult = PeriphClk / usartdiv; +#endif /* USART_PRESC_PRESCALER */ + } + } + return (brrresult); +} + +/** + * @brief Set Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_SetRxTimeout + * @param USARTx USART Instance + * @param Timeout Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRxTimeout(USART_TypeDef *USARTx, uint32_t Timeout) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_RTO, Timeout); +} + +/** + * @brief Get Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_GetRxTimeout + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + */ +__STATIC_INLINE uint32_t LL_USART_GetRxTimeout(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_RTO)); +} + +/** + * @brief Set Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_SetBlockLength + * @param USARTx USART Instance + * @param BlockLength Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBlockLength(USART_TypeDef *USARTx, uint32_t BlockLength) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_BLEN, BlockLength << USART_RTOR_BLEN_Pos); +} + +/** + * @brief Get Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_GetBlockLength + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_USART_GetBlockLength(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_BLEN) >> USART_RTOR_BLEN_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature + * @{ + */ + +/** + * @brief Enable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_EnableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Disable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_DisableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Indicate if IrDA mode is enabled + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_IsEnabledIrda + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN)) ? 1UL : 0UL); +} + +/** + * @brief Configure IrDA Power Mode (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode + * @param USARTx USART Instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_IRDA_POWER_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode); +} + +/** + * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP)); +} + +/** + * @brief Set Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler + * @param USARTx USART Instance + * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature + * @{ + */ + +/** + * @brief Enable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Disable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Indicate if Smartcard NACK transmission is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK)) ? 1UL : 0UL); +} + +/** + * @brief Enable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_EnableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Disable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_DisableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Indicate if Smartcard mode is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note This bit-field specifies the number of retries in transmit and receive, in Smartcard mode. + * In transmission mode, it specifies the number of automatic retransmission retries, before + * generating a transmission error (FE bit set). + * In reception mode, it specifies the number or erroneous reception trials, before generating a + * reception error (RXNE and PE bits set) + * @rmtoll CR3 SCARCNT LL_USART_SetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @param AutoRetryCount Value between Min_Data=0 and Max_Data=7 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardAutoRetryCount(USART_TypeDef *USARTx, uint32_t AutoRetryCount) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_SCARCNT, AutoRetryCount << USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Return Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCARCNT LL_USART_GetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @retval Smartcard Auto-Retry Count value (Value between Min_Data=0 and Max_Data=7) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardAutoRetryCount(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_SCARCNT) >> USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Set Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler + * @param USARTx USART Instance + * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime + * @param USARTx USART Instance + * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, (uint16_t)(GuardTime << USART_GTPR_GT_Pos)); +} + +/** + * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime + * @param USARTx USART Instance + * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_GTPR_GT_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USART_CR2_SLVEN) +/** @defgroup USART_LL_EF_Configuration_SPI_SLAVE Configuration functions related to SPI Slave feature + * @{ + */ +/** + * @brief Enable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_EnableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlave(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Disable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_DisableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlave(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Indicate if SPI Synchronous Slave mode is enabled + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_IsEnabledSPISlave + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlave(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_SLVEN) == (USART_CR2_SLVEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave Selection depends on NSS input pin + * (The slave is selected when NSS is low and deselected when NSS is high). + * @rmtoll CR2 DIS_NSS LL_USART_EnableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlaveSelect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Disable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave will be always selected and NSS input pin will be ignored. + * @rmtoll CR2 DIS_NSS LL_USART_DisableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlaveSelect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Indicate if SPI Slave Selection depends on NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 DIS_NSS LL_USART_IsEnabledSPISlaveSelect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlaveSelect(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_DIS_NSS) != (USART_CR2_DIS_NSS)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#endif /* USART_CR2_SLVEN */ +/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature + * @{ + */ + +/** + * @brief Set LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen + * @param USARTx USART Instance + * @param LINBDLength This parameter can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength); +} + +/** + * @brief Return LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + */ +__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL)); +} + +/** + * @brief Enable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_EnableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Disable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_DisableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Indicate if LIN mode is enabled + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_SetDEDeassertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEDeassertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_GetDEDeassertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEDeassertionTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_SetDEAssertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEAssertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_GetDEAssertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEAssertionTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_EnableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDEMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_DisableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDEMode(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_IsEnabledDEMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDEMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_SetDESignalPolarity + * @param USARTx USART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDESignalPolarity(USART_TypeDef *USARTx, uint32_t Polarity) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_GetDESignalPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_USART_GetDESignalPolarity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services + * @{ + */ + +/** + * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART) + * @note In UART mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Asynchronous Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n + * CR2 CLKEN LL_USART_ConfigAsyncMode\n + * CR3 SCEN LL_USART_ConfigAsyncMode\n + * CR3 IREN LL_USART_ConfigAsyncMode\n + * CR3 HDSEL LL_USART_ConfigAsyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx) +{ + /* In Asynchronous mode, the following bits must be kept cleared: + - LINEN, CLKEN bits in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Synchronous Mode + * @note In Synchronous mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the USART in Synchronous mode. + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * @note Other remaining configurations items related to Synchronous Mode + * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n + * CR2 CLKEN LL_USART_ConfigSyncMode\n + * CR3 SCEN LL_USART_ConfigSyncMode\n + * CR3 IREN LL_USART_ConfigSyncMode\n + * CR3 HDSEL LL_USART_ConfigSyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx) +{ + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); + /* set the UART/USART in Synchronous mode */ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in LIN Mode + * @note In LIN mode, the following bits must be kept cleared: + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also set the UART/USART in LIN mode. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function + * @note Other remaining configurations items related to LIN Mode + * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using + * dedicated functions + * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n + * CR2 STOP LL_USART_ConfigLINMode\n + * CR2 LINEN LL_USART_ConfigLINMode\n + * CR3 IREN LL_USART_ConfigLINMode\n + * CR3 SCEN LL_USART_ConfigLINMode\n + * CR3 HDSEL LL_USART_ConfigLINMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx) +{ + /* In LIN mode, the following bits must be kept cleared: + - STOP and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL)); + /* Set the UART/USART in LIN mode */ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode + * @note In Half Duplex mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * This function also sets the UART/USART in Half Duplex mode. + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function + * @note Other remaining configurations items related to Half Duplex Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n + * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n + * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n + * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n + * CR3 IREN LL_USART_ConfigHalfDuplexMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx) +{ + /* In Half Duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN)); + /* set the UART/USART in Half Duplex mode */ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Smartcard Mode + * @note In Smartcard mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also configures Stop bits to 1.5 bits and + * sets the USART in Smartcard mode (SCEN bit). + * Clock Output is also enabled (CLKEN). + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function + * @note Other remaining configurations items related to Smartcard Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n + * CR2 STOP LL_USART_ConfigSmartcardMode\n + * CR2 CLKEN LL_USART_ConfigSmartcardMode\n + * CR3 HDSEL LL_USART_ConfigSmartcardMode\n + * CR3 SCEN LL_USART_ConfigSmartcardMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx) +{ + /* In Smartcard mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); + /* Configure Stop bits to 1.5 bits */ + /* Synchronous mode is activated by default */ + SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN)); + /* set the UART/USART in Smartcard mode */ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Irda Mode + * @note In IRDA mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the UART/USART in IRDA mode (IREN bit). + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function + * @note Other remaining configurations items related to Irda Mode + * (as Baud Rate, Word length, Power mode, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n + * CR2 CLKEN LL_USART_ConfigIrdaMode\n + * CR2 STOP LL_USART_ConfigIrdaMode\n + * CR3 SCEN LL_USART_ConfigIrdaMode\n + * CR3 HDSEL LL_USART_ConfigIrdaMode\n + * CR3 IREN LL_USART_ConfigIrdaMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx) +{ + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + /* set the UART/USART in IRDA mode */ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Multi processor Mode + * (several USARTs connected in a network, one of the USARTs can be the master, + * its TX output connected to the RX inputs of the other slaves USARTs). + * @note In MultiProcessor mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Multi processor Mode + * (as Baud Rate, Wake Up Method, Node address, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n + * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n + * CR3 SCEN LL_USART_ConfigMultiProcessMode\n + * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n + * CR3 IREN LL_USART_ConfigMultiProcessMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx) +{ + /* In Multi Processor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the USART Parity Error Flag is set or not + * @rmtoll ISR PE LL_USART_IsActiveFlag_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Framing Error Flag is set or not + * @rmtoll ISR FE LL_USART_IsActiveFlag_FE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_USART_IsActiveFlag_NE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_USART_IsActiveFlag_ORE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_USART_IsActiveFlag_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_USART_IsActiveFlag_RXNE LL_USART_IsActiveFlag_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART Read Data Register or USART RX FIFO Not Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXNE_RXFNE LL_USART_IsActiveFlag_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE_RXFNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXNE_RXFNE) == (USART_ISR_RXNE_RXFNE)) ? 1UL : 0UL); +} + +#else +/** + * @brief Check if the USART Read Data Register Not Empty Flag is set or not + * @rmtoll ISR RXNE LL_USART_IsActiveFlag_RXNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXNE) == (USART_ISR_RXNE)) ? 1UL : 0UL); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Check if the USART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_USART_IsActiveFlag_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_USART_IsActiveFlag_TXE LL_USART_IsActiveFlag_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART Transmit Data Register Empty or USART TX FIFO Not Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXE_TXFNF LL_USART_IsActiveFlag_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE_TXFNF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXE_TXFNF) == (USART_ISR_TXE_TXFNF)) ? 1UL : 0UL); +} + +#else +/** + * @brief Check if the USART Transmit Data Register Empty Flag is set or not + * @rmtoll ISR TXE LL_USART_IsActiveFlag_TXE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXE) == (USART_ISR_TXE)) ? 1UL : 0UL); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Check if the USART LIN Break Detection Flag is set or not + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ISR LBDF LL_USART_IsActiveFlag_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_LBDF) == (USART_ISR_LBDF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS interrupt Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTSIF LL_USART_IsActiveFlag_nCTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTS LL_USART_IsActiveFlag_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Time Out Flag is set or not + * @rmtoll ISR RTOF LL_USART_IsActiveFlag_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RTO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RTOF) == (USART_ISR_RTOF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Flag is set or not + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ISR EOBF LL_USART_IsActiveFlag_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_EOB(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_EOBF) == (USART_ISR_EOBF)) ? 1UL : 0UL); +} + +#if defined(USART_CR2_SLVEN) +/** + * @brief Check if the SPI Slave Underrun error flag is set or not + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ISR UDR LL_USART_IsActiveFlag_UDR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_UDR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_UDR) == (USART_ISR_UDR)) ? 1UL : 0UL); +} + +#endif /* USART_CR2_SLVEN */ +/** + * @brief Check if the USART Auto-Baud Rate Error Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRE LL_USART_IsActiveFlag_ABRE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABRE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRE) == (USART_ISR_ABRE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRF LL_USART_IsActiveFlag_ABR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRF) == (USART_ISR_ABRF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Busy Flag is set or not + * @rmtoll ISR BUSY LL_USART_IsActiveFlag_BUSY + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_BUSY(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Flag is set or not + * @rmtoll ISR CMF LL_USART_IsActiveFlag_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CM(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_USART_IsActiveFlag_SBK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_USART_IsActiveFlag_RWU + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from stop mode Flag is set or not + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ISR WUF LL_USART_IsActiveFlag_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_WKUP(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_USART_IsActiveFlag_TEACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TEACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_USART_IsActiveFlag_REACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_REACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Check if the USART TX FIFO Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFE LL_USART_IsActiveFlag_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFE) == (USART_ISR_TXFE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFF LL_USART_IsActiveFlag_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFF) == (USART_ISR_RXFF)) ? 1UL : 0UL); +} + +#endif /* USART_CR1_FIFOEN */ +#if defined(USART_TCBGT_SUPPORT) +/* Function available only on devices supporting Transmit Complete before Guard Time feature */ +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Flag is set or not + * @rmtoll ISR TCBGT LL_USART_IsActiveFlag_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TCBGT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TCBGT) == (USART_ISR_TCBGT)) ? 1UL : 0UL); +} + +#endif /* USART_TCBGT_SUPPORT */ +#if defined(USART_CR1_FIFOEN) +/** + * @brief Check if the USART TX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFT LL_USART_IsActiveFlag_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFT) == (USART_ISR_TXFT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFT LL_USART_IsActiveFlag_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFT) == (USART_ISR_RXFT)) ? 1UL : 0UL); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_USART_ClearFlag_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_USART_ClearFlag_FE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise Error detected Flag + * @rmtoll ICR NECF LL_USART_ClearFlag_NE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_NECF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_USART_ClearFlag_ORE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_USART_ClearFlag_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_IDLECF); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Clear TX FIFO Empty Flag + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ICR TXFECF LL_USART_ClearFlag_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TXFE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TXFECF); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_USART_ClearFlag_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCCF); +} + +#if defined(USART_TCBGT_SUPPORT) +/* Function available only on devices supporting Transmit Complete before Guard Time feature */ +/** + * @brief Clear Smartcard Transmission Complete Before Guard Time Flag + * @rmtoll ICR TCBGTCF LL_USART_ClearFlag_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TCBGT(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCBGTCF); +} +#endif /* USART_TCBGT_SUPPORT */ + +/** + * @brief Clear LIN Break Detection Flag + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ICR LBDCF LL_USART_ClearFlag_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_LBDCF); +} + +/** + * @brief Clear CTS Interrupt Flag + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ICR CTSCF LL_USART_ClearFlag_nCTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Receiver Time Out Flag + * @rmtoll ICR RTOCF LL_USART_ClearFlag_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_RTO(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_RTOCF); +} + +/** + * @brief Clear End Of Block Flag + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ICR EOBCF LL_USART_ClearFlag_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_EOB(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_EOBCF); +} + +#if defined(USART_CR2_SLVEN) +/** + * @brief Clear SPI Slave Underrun Flag + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ICR UDRCF LL_USART_ClearFlag_UDR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_UDR(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_UDRCF); +} + +#endif /* USART_CR2_SLVEN */ +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_USART_ClearFlag_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_CM(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CMCF); +} + +/** + * @brief Clear Wake Up from stop mode Flag + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ICR WUCF LL_USART_ClearFlag_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_WKUP(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_WUCF); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_USART_EnableIT_RXNE LL_USART_EnableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Enable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_EnableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +#else +/** + * @brief Enable RX Not Empty Interrupt + * @rmtoll CR1 RXNEIE LL_USART_EnableIT_RXNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXNE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_EnableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_USART_EnableIT_TXE LL_USART_EnableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Enable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_EnableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +#else +/** + * @brief Enable TX Empty Interrupt + * @rmtoll CR1 TXEIE LL_USART_EnableIT_TXE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_EnableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_EnableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Enable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_EnableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Enable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_EnableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Enable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_EnableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Enable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_USART_EnableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFF(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Enable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_EnableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Enable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_EnableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +#endif /* USART_CR1_FIFOEN */ +#if defined(USART_TCBGT_SUPPORT) +/* Function available only on devices supporting Transmit Complete before Guard Time feature */ +/** + * @brief Enable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_EnableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TCBGT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} +#endif /* USART_TCBGT_SUPPORT */ + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Enable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_EnableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_USART_DisableIT_RXNE LL_USART_DisableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Disable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_DisableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +#else +/** + * @brief Disable RX Not Empty Interrupt + * @rmtoll CR1 RXNEIE LL_USART_DisableIT_RXNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXNE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_DisableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_USART_DisableIT_TXE LL_USART_DisableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Disable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_DisableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +#else +/** + * @brief Disable TX Empty Interrupt + * @rmtoll CR1 TXEIE LL_USART_DisableIT_TXE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_DisableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_DisableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Disable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_DisableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Disable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_DisableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Disable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_DisableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Disable RX FIFO Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_DisableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFF(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Disable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_DisableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Disable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_DisableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +#endif /* USART_CR1_FIFOEN */ +#if defined(USART_TCBGT_SUPPORT) +/* Function available only on devices supporting Transmit Complete before Guard Time feature */ +/** + * @brief Disable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_DisableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TCBGT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} +#endif /* USART_TCBGT_SUPPORT */ + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Disable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_DisableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Check if the USART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_USART_IsEnabledIT_RXNE LL_USART_IsEnabledIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART RX Not Empty and USART RX FIFO Not Empty Interrupt is enabled or disabled. + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_IsEnabledIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE_RXFNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE) == (USART_CR1_RXNEIE_RXFNEIE)) ? 1UL : 0UL); +} + +#else +/** + * @brief Check if the USART RX Not Empty Interrupt is enabled or disabled. + * @rmtoll CR1 RXNEIE LL_USART_IsEnabledIT_RXNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXNEIE) == (USART_CR1_RXNEIE)) ? 1U : 0U); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +#define LL_USART_IsEnabledIT_TXE LL_USART_IsEnabledIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART TX Empty and USART TX FIFO Not Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_IsEnabledIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE_TXFNF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE) == (USART_CR1_TXEIE_TXFNFIE)) ? 1UL : 0UL); +} + +#else +/** + * @brief Check if the USART TX Empty Interrupt is enabled or disabled. + * @rmtoll CR1 TXEIE LL_USART_IsEnabledIT_TXE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXEIE) == (USART_CR1_TXEIE)) ? 1U : 0U); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Check if the USART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_USART_IsEnabledIT_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CM(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Timeout Interrupt is enabled or disabled. + * @rmtoll CR1 RTOIE LL_USART_IsEnabledIT_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RTO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RTOIE) == (USART_CR1_RTOIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_IsEnabledIT_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_EOB(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_EOBIE) == (USART_CR1_EOBIE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Check if the USART TX FIFO Empty Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_IsEnabledIT_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXFEIE) == (USART_CR1_TXFEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_IsEnabledIT_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXFFIE) == (USART_CR1_RXFFIE)) ? 1UL : 0UL); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Interrupt is enabled or disabled. + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_IsEnabledIT_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_WKUP(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Check if USART TX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_IsEnabledIT_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TXFTIE) == (USART_CR3_TXFTIE)) ? 1UL : 0UL); +} + +#endif /* USART_CR1_FIFOEN */ +#if defined(USART_TCBGT_SUPPORT) +/* Function available only on devices supporting Transmit Complete before Guard Time feature */ +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_IsEnabledIT_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TCBGT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TCBGTIE) == (USART_CR3_TCBGTIE)) ? 1UL : 0UL); +} +#endif /* USART_TCBGT_SUPPORT */ + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Check if USART RX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_IsEnabledIT_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_RXFTIE) == (USART_CR3_RXFTIE)) ? 1UL : 0UL); +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +/** @defgroup USART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_EnableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_DisableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_USART_IsEnabledDMADeactOnRxErr + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMADeactOnRxErr(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll RDR RDR LL_USART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_USART_DMA_GetRegAddr + * @param USARTx USART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_USART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_USART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(const USART_TypeDef *USARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_USART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(USARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(USARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData8 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_USART_ReceiveData8(const USART_TypeDef *USARTx) +{ + return (uint8_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData9 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_USART_ReceiveData9(const USART_TypeDef *USARTx) +{ + return (uint16_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_USART_TransmitData8 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value) +{ + USARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_USART_TransmitData9 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value) +{ + USARTx->TDR = (uint16_t)(Value & 0x1FFUL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request an Automatic Baud Rate measurement on next received data frame + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll RQR ABRRQ LL_USART_RequestAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_ABRRQ); +} + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_USART_RequestBreakSending + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put USART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_USART_RequestEnterMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + @if USART_CR1_FIFOEN + * @brief Request a Receive Data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + @else + * @brief Request a Receive Data flush + @endif + * @rmtoll RQR RXFRQ LL_USART_RequestRxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestRxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +/** + @if USART_CR1_FIFOEN + * @brief Request a Transmit data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + @else + * @brief Request a Transmit data flush + @endif + * @rmtoll RQR TXFRQ LL_USART_RequestTxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestTxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_TXFRQ); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_USART_DeInit(const USART_TypeDef *USARTx); +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, const LL_USART_InitTypeDef *USART_InitStruct); +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct); +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, const LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 || USART2 || USART3 || UART4 || UART5 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_USART_H */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_utils.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_utils.h new file mode 100644 index 0000000..8c2d542 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_utils.h @@ -0,0 +1,329 @@ +/** + ****************************************************************************** + * @file stm32l4xx_ll_utils.h + * @author MCD Application Team + * @brief Header file of UTILS LL module. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL UTILS driver contains a set of generic APIs that can be + used by user: + (+) Device electronic signature + (+) Timing functions + (+) PLL configuration functions + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32L4xx_LL_UTILS_H +#define STM32L4xx_LL_UTILS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx.h" + +/** @addtogroup STM32L4xx_LL_Driver + * @{ + */ + +/** @defgroup UTILS_LL UTILS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants + * @{ + */ + +/* Max delay can be used in LL_mDelay */ +#define LL_MAX_DELAY 0xFFFFFFFFU + +/** + * @brief Unique device ID register base address + */ +#define UID_BASE_ADDRESS UID_BASE + +/** + * @brief Flash size data register base address + */ +#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE + +/** + * @brief Package data register base address + */ +#define PACKAGE_BASE_ADDRESS PACKAGE_BASE + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros + * @{ + */ +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures + * @{ + */ +/** + * @brief UTILS PLL structure definition + */ +typedef struct +{ + uint32_t PLLM; /*!< Division factor for PLL VCO input clock. + This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ + + uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 8 and Max_Data = 86 + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ + + uint32_t PLLR; /*!< Division for the main system clock. + This parameter can be a value of @ref RCC_LL_EC_PLLR_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL_ConfigDomain_SYS(). */ +} LL_UTILS_PLLInitTypeDef; + +/** + * @brief UTILS System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAHBPrescaler(). */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB1_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB1Prescaler(). */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB2_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB2Prescaler(). */ + +} LL_UTILS_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants + * @{ + */ + +/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation + * @{ + */ +#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */ +#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */ +/** + * @} + */ + +/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE + * @{ + */ +#define LL_UTILS_PACKAGETYPE_LQFP64 0x00000000U /*!< LQFP64 package type */ +#define LL_UTILS_PACKAGETYPE_WLCSP64 0x00000001U /*!< WLCSP64 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP100 0x00000002U /*!< LQFP100 package type */ +#define LL_UTILS_PACKAGETYPE_BGA132 0x00000003U /*!< BGA132 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP144_CSP72 0x00000004U /*!< LQFP144, WLCSP81 or WLCSP72 package type */ +#define LL_UTILS_PACKAGETYPE_UFQFPN32 0x00000008U /*!< UFQFPN32 package type */ +#define LL_UTILS_PACKAGETYPE_UFQFPN48 0x0000000AU /*!< UFQFPN48 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP48 0x0000000BU /*!< LQFP48 package type */ +#define LL_UTILS_PACKAGETYPE_WLCSP49 0x0000000CU /*!< WLCSP49 package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA64 0x0000000DU /*!< UFBGA64 package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA100 0x0000000EU /*!< UFBGA100 package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA169_CSP115 0x00000010U /*!< UFBGA169 or WLCSP115 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP100_DSI 0x00000012U /*!< LQFP100 with DSI package type */ +#define LL_UTILS_PACKAGETYPE_WLCSP144_DSI 0x00000013U /*!< WLCSP144 with DSI package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA144_DSI 0x00000013U /*!< UFBGA144 with DSI package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA169_DSI 0x00000014U /*!< UFBGA169 with DSI package type */ +#define LL_UTILS_PACKAGETYPE_LQFP144_DSI 0x00000015U /*!< LQFP144 with DSI package type */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions + * @{ + */ + +/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE + * @{ + */ + +/** + * @brief Get Word0 of the unique device identifier (UID based on 96 bits) + * @retval UID[31:0]: X and Y coordinates on the wafer expressed in BCD format + */ +__STATIC_INLINE uint32_t LL_GetUID_Word0(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); +} + +/** + * @brief Get Word1 of the unique device identifier (UID based on 96 bits) + * @retval UID[63:32]: Wafer number (UID[39:32]) & LOT_NUM[23:0] (UID[63:40]) + */ +__STATIC_INLINE uint32_t LL_GetUID_Word1(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); +} + +/** + * @brief Get Word2 of the unique device identifier (UID based on 96 bits) + * @retval UID[95:64]: Lot number (ASCII encoded) - LOT_NUM[55:24] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word2(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U)))); +} + +/** + * @brief Get Flash memory size + * @note This bitfield indicates the size of the device Flash memory expressed in + * Kbytes. As an example, 0x040 corresponds to 64 Kbytes. + * @retval FLASH_SIZE[15:0]: Flash memory size + */ +__STATIC_INLINE uint32_t LL_GetFlashSize(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0xFFFFU); +} + +/** + * @brief Get Package type + * @retval Returned value can be one of the following values: + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP64 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_BGA132 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_CSP72 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFQFPN32 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFQFPN48 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP48 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP49 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA64 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA100 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA169 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100_DSI (*) + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP144_DSI (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA144_DSI (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA169_DSI (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_DSI (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_GetPackageType(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x1FU); +} + +/** + * @} + */ + +/** @defgroup UTILS_LL_EF_DELAY DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source of the time base. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @note When a RTOS is used, it is recommended to avoid changing the SysTick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param Ticks Frequency of Ticks (Hz) + * @retval None + */ +__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks) +{ + /* Configure the SysTick to have interrupt in 1ms time base */ + SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */ +} + +void LL_Init1msTick(uint32_t HCLKFrequency); +void LL_mDelay(uint32_t Delay); + +/** + * @} + */ + +/** @defgroup UTILS_EF_SYSTEM SYSTEM + * @{ + */ + +void LL_SetSystemCoreClock(uint32_t HCLKFrequency); +ErrorStatus LL_SetFlashLatency(uint32_t HCLKFrequency); +ErrorStatus LL_PLL_ConfigSystemClock_MSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32L4xx_LL_UTILS_H */ diff --git a/Drivers/STM32L4xx_HAL_Driver/LICENSE.txt b/Drivers/STM32L4xx_HAL_Driver/LICENSE.txt new file mode 100644 index 0000000..3edc4d1 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/LICENSE.txt @@ -0,0 +1,6 @@ +This software component is provided to you as part of a software package and +applicable license terms are in the Package_license file. If you received this +software component outside of a package or without applicable license terms, +the terms of the BSD-3-Clause license shall apply. +You may obtain a copy of the BSD-3-Clause at: +https://opensource.org/licenses/BSD-3-Clause diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c new file mode 100644 index 0000000..9d0c693 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal.c @@ -0,0 +1,765 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs' categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @brief HAL module driver + * @{ + */ + +#ifdef HAL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** + * @brief STM32L4xx HAL Driver version number + */ +#define STM32L4XX_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define STM32L4XX_HAL_VERSION_SUB1 (0x0DU) /*!< [23:16] sub1 version */ +#define STM32L4XX_HAL_VERSION_SUB2 (0x05U) /*!< [15:8] sub2 version */ +#define STM32L4XX_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define STM32L4XX_HAL_VERSION ((STM32L4XX_HAL_VERSION_MAIN << 24U)\ + |(STM32L4XX_HAL_VERSION_SUB1 << 16U)\ + |(STM32L4XX_HAL_VERSION_SUB2 << 8U)\ + |(STM32L4XX_HAL_VERSION_RC)) + +#if defined(VREFBUF) +#define VREFBUF_TIMEOUT_VALUE 10U /* 10 ms (to be confirmed) */ +#endif /* VREFBUF */ + +/* ------------ SYSCFG registers bit address in the alias region ------------ */ +#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE) +/* --- MEMRMP Register ---*/ +/* Alias word address of FB_MODE bit */ +#define MEMRMP_OFFSET SYSCFG_OFFSET +#define FB_MODE_BitNumber 8U +#define FB_MODE_BB (PERIPH_BB_BASE + (MEMRMP_OFFSET * 32U) + (FB_MODE_BitNumber * 4U)) + +/* --- SCSR Register ---*/ +/* Alias word address of SRAM2ER bit */ +#define SCSR_OFFSET (SYSCFG_OFFSET + 0x18U) +#define BRER_BitNumber 0U +#define SCSR_SRAM2ER_BB (PERIPH_BB_BASE + (SCSR_OFFSET * 32U) + (BRER_BitNumber * 4U)) + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported variables --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Variables HAL Exported Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid priority */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the Flash interface, the NVIC allocation and initial time base + clock configuration. + (+) De-initialize common part of the HAL. + (+) Configure the time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak + to make override possible in case of other implementations in user file. +@endverbatim + * @{ + */ + +/** + * @brief Configure the Flash prefetch, the Instruction and Data caches, + * the time base source, NVIC and any required global low level hardware + * by calling the HAL_MspInit() callback function to be optionally defined in user file + * stm32l4xx_hal_msp.c. + * + * @note HAL_Init() function is called at the beginning of program after reset and before + * the clock configuration. + * + * @note In the default implementation the System Timer (Systick) is used as source of time base. + * The Systick configuration is based on MSI clock, as MSI is the clock + * used after a system Reset and the NVIC configuration is set to Priority group 4. + * Once done, time base tick starts incrementing: the tick variable counter is incremented + * each 1ms in the SysTick_Handler() interrupt handler. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Configure Flash prefetch, Instruction cache, Data cache */ + /* Default configuration at reset is: */ + /* - Prefetch disabled */ + /* - Instruction cache enabled */ + /* - Data cache enabled */ +#if (INSTRUCTION_CACHE_ENABLE == 0) + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); +#endif /* INSTRUCTION_CACHE_ENABLE */ + +#if (DATA_CACHE_ENABLE == 0) + __HAL_FLASH_DATA_CACHE_DISABLE(); +#endif /* DATA_CACHE_ENABLE */ + +#if (PREFETCH_ENABLE != 0) + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); +#endif /* PREFETCH_ENABLE */ + + /* Set Interrupt Group Priority */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); + + /* Use SysTick as time base source and configure 1ms tick (default clock after Reset is MSI) */ + if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + { + status = HAL_ERROR; + } + else + { + /* Init the low level hardware */ + HAL_MspInit(); + } + + /* Return function status */ + return status; +} + +/** + * @brief De-initialize common part of the HAL and stop the source of time base. + * @note This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_AHB1_FORCE_RESET(); + __HAL_RCC_AHB1_RELEASE_RESET(); + + __HAL_RCC_AHB2_FORCE_RESET(); + __HAL_RCC_AHB2_RELEASE_RESET(); + + __HAL_RCC_AHB3_FORCE_RESET(); + __HAL_RCC_AHB3_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base: + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that doesn't take the value zero)*/ + if ((uint32_t)uwTickFreq != 0U) + { + /*Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / (uint32_t)uwTickFreq)) == 0U) + { + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in SysTick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += (uint32_t)uwTickFreq; +} + +/** + * @brief Provide a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @param Freq tick frequency + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + + if (uwTickFreq != Freq) + { + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } + } + + return status; +} + +/** + * @brief Return tick frequency. + * @retval Tick frequency. + * Value of @ref HAL_TickFreqTypeDef. + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides minimum delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a period to guaranty minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)uwTickFreq; + } + + while ((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Return the HAL revision. + * @retval version : 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return STM32L4XX_HAL_VERSION; +} + +/** + * @brief Return the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return((DBGMCU->IDCODE & DBGMCU_IDCODE_REV_ID) >> 16); +} + +/** + * @brief Return the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return(DBGMCU->IDCODE & DBGMCU_IDCODE_DEV_ID); +} + +/** + * @brief Return the first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return(READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Return the second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Return the third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group3 HAL Debug functions + * @brief HAL Debug functions + * +@verbatim + =============================================================================== + ##### HAL Debug functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable/Disable Debug module during SLEEP mode + (+) Enable/Disable Debug module during STOP0/STOP1/STOP2 modes + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Debug Module during SLEEP mode. + * @retval None + */ +void HAL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during SLEEP mode. + * @retval None + */ +void HAL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Enable the Debug Module during STOP0/STOP1/STOP2 modes. + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP0/STOP1/STOP2 modes. + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode. + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode. + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group4 HAL SYSCFG configuration functions + * @brief HAL SYSCFG configuration functions + * +@verbatim + =============================================================================== + ##### HAL SYSCFG configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start a hardware SRAM2 erase operation + (+) Enable/Disable the Internal FLASH Bank Swapping + (+) Configure the Voltage reference buffer + (+) Enable/Disable the Voltage reference buffer + (+) Enable/Disable the I/O analog switch voltage booster + +@endverbatim + * @{ + */ + +/** + * @brief Start a hardware SRAM2 erase operation. + * @note As long as SRAM2 is not erased the SRAM2ER bit will be set. + * This bit is automatically reset at the end of the SRAM2 erase operation. + * @retval None + */ +void HAL_SYSCFG_SRAM2Erase(void) +{ + /* unlock the write protection of the SRAM2ER bit */ + SYSCFG->SKR = 0xCA; + SYSCFG->SKR = 0x53; + /* Starts a hardware SRAM2 erase operation*/ + *(__IO uint32_t *) SCSR_SRAM2ER_BB = 0x00000001UL; +} + +/** + * @brief Enable the Internal FLASH Bank Swapping. + * + * @note This function can be used only for STM32L4xx devices. + * + * @note Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000) + * and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000) + * + * @retval None + */ +void HAL_SYSCFG_EnableMemorySwappingBank(void) +{ + *(__IO uint32_t *)FB_MODE_BB = 0x00000001UL; +} + +/** + * @brief Disable the Internal FLASH Bank Swapping. + * + * @note This function can be used only for STM32L4xx devices. + * + * @note The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x0000 0000) + * and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000) + * + * @retval None + */ +void HAL_SYSCFG_DisableMemorySwappingBank(void) +{ + + *(__IO uint32_t *)FB_MODE_BB = 0x00000000UL; +} + +#if defined(VREFBUF) +/** + * @brief Configure the internal voltage reference buffer voltage scale. + * @param VoltageScaling specifies the output voltage to achieve + * This parameter can be one of the following values: + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE0: VREF_OUT1 around 2.048 V. + * This requires VDDA equal to or higher than 2.4 V. + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE1: VREF_OUT2 around 2.5 V. + * This requires VDDA equal to or higher than 2.8 V. + * @retval None + */ +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling); +} + +/** + * @brief Configure the internal voltage reference buffer high impedance mode. + * @param Mode specifies the high impedance mode + * This parameter can be one of the following values: + * @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE: VREF+ pin is internally connect to VREFINT output. + * @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE: VREF+ pin is high impedance. + * @retval None + */ +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(Mode)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode); +} + +/** + * @brief Tune the Internal Voltage Reference buffer (VREFBUF). + * @retval None + */ +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue)); + + MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue); +} + +/** + * @brief Enable the Internal Voltage Reference buffer (VREFBUF). + * @retval HAL_OK/HAL_TIMEOUT + */ +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void) +{ + uint32_t tickstart; + + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait for VRR bit */ + while(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == 0U) + { + if((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the Internal Voltage Reference buffer (VREFBUF). + * + * @retval None + */ +void HAL_SYSCFG_DisableVREFBUF(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} +#endif /* VREFBUF */ + +/** + * @brief Enable the I/O analog switch voltage booster + * + * @retval None + */ +void HAL_SYSCFG_EnableIOAnalogSwitchBooster(void) +{ + SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @brief Disable the I/O analog switch voltage booster + * + * @retval None + */ +void HAL_SYSCFG_DisableIOAnalogSwitchBooster(void) +{ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c new file mode 100644 index 0000000..0b94bbd --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_cortex.c @@ -0,0 +1,541 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and Configuration functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex-M4 exceptions are managed by CMSIS functions. + + (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() function. + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority(). + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ(). + + -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ pre-emption is no more possible. + The pending IRQ priority will be managed only by the sub priority. + + -@- IRQ priority order (sorted by highest to lowest priority): + (+@) Lowest pre-emption priority + (+@) Lowest sub priority + (+@) Lowest hardware priority (IRQ number) + + [..] + *** How to configure SysTick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value (0x0F). + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined + inside the stm32l4xx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + + The table below gives the allowed values of the pre-emption priority and subpriority according + to the Priority Grouping configuration performed by HAL_NVIC_SetPriorityGrouping() function. + + ========================================================================================================================== + NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description + ========================================================================================================================== + NVIC_PRIORITYGROUP_0 | 0 | 0-15 | 0 bit for pre-emption priority + | | | 4 bits for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_1 | 0-1 | 0-7 | 1 bit for pre-emption priority + | | | 3 bits for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_2 | 0-3 | 0-3 | 2 bits for pre-emption priority + | | | 2 bits for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_3 | 0-7 | 0-1 | 3 bits for pre-emption priority + | | | 1 bit for subpriority + -------------------------------------------------------------------------------------------------------------------------- + NVIC_PRIORITYGROUP_4 | 0-15 | 0 | 4 bits for pre-emption priority + | | | 0 bit for subpriority + ========================================================================================================================== + + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + SysTick functionalities + +@endverbatim + * @{ + */ + + +/** + * @brief Set the priority grouping field (pre-emption priority and subpriority) + * using the required unlock sequence. + * @param PriorityGroup: The priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bit for pre-emption priority, + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bit for pre-emption priority, + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority, + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority, + * 1 bit for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority, + * 0 bit for subpriority + * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible. + * The pending IRQ priority will be managed only by the subpriority. + * @retval None + */ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ + NVIC_SetPriorityGrouping(PriorityGroup); +} + +/** + * @brief Set the priority of an interrupt. + * @param IRQn: External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @param PreemptPriority: The pre-emption priority for the IRQn channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority + * @param SubPriority: the subpriority level for the IRQ channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t prioritygroup = 0x00; + + /* Check the parameters */ + assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + + prioritygroup = NVIC_GetPriorityGrouping(); + + NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); +} + +/** + * @brief Enable a device specific interrupt in the NVIC interrupt controller. + * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() + * function should be called before. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disable a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiate a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initialize the System Timer with interrupt enabled and start the System Tick Timer (SysTick): + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb: Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK, MPU) functionalities. + + +@endverbatim + * @{ + */ + +/** + * @brief Get the priority grouping field from the NVIC Interrupt Controller. + * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field) + */ +uint32_t HAL_NVIC_GetPriorityGrouping(void) +{ + /* Get the PRIGROUP[10:8] field value */ + return NVIC_GetPriorityGrouping(); +} + +/** + * @brief Get the priority of an interrupt. + * @param IRQn: External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @param PriorityGroup: the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bit for pre-emption priority, + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bit for pre-emption priority, + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority, + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority, + * 1 bit for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority, + * 0 bit for subpriority + * @param pPreemptPriority: Pointer on the Preemptive priority value (starting from 0). + * @param pSubPriority: Pointer on the Subpriority value (starting from 0). + * @retval None + */ +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + /* Get priority for Cortex-M system or device specific interrupts */ + NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority); +} + +/** + * @brief Set Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Get Pending Interrupt (read the pending register in the NVIC + * and return the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clear the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Get active interrupt (read the active register in NVIC and return the active bit). + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32l4xxxx.h)) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) +{ + /* Return 1 if active else 0 */ + return NVIC_GetActive(IRQn); +} + +/** + * @brief Configure the SysTick clock source. + * @param CLKSource: specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + if (CLKSource == SYSTICK_CLKSOURCE_HCLK) + { + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + } + else + { + SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; + } +} + +/** + * @brief Handle SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +#if (__MPU_PRESENT == 1) +/** + * @brief Enable the MPU. + * @param MPU_Control: Specifies the control mode of the MPU during hard fault, + * NMI, FAULTMASK and privileged accessto the default memory + * This parameter can be one of the following values: + * @arg MPU_HFNMI_PRIVDEF_NONE + * @arg MPU_HARDFAULT_NMI + * @arg MPU_PRIVILEGED_DEFAULT + * @arg MPU_HFNMI_PRIVDEF + * @retval None + */ +void HAL_MPU_Enable(uint32_t MPU_Control) +{ + /* Enable the MPU */ + MPU->CTRL = (MPU_Control | MPU_CTRL_ENABLE_Msk); + + /* Ensure MPU setting take effects */ + __DSB(); + __ISB(); +} + + +/** + * @brief Disable the MPU. + * @retval None + */ +void HAL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + + /* Disable the MPU and clear the control register*/ + MPU->CTRL = 0; +} + +/** + * @brief Enable the MPU Region. + * @retval None + */ +void HAL_MPU_EnableRegion(uint32_t RegionNumber) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(RegionNumber)); + + /* Set the Region number */ + MPU->RNR = RegionNumber; + + /* Enable the Region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Disable the MPU Region. + * @retval None + */ +void HAL_MPU_DisableRegion(uint32_t RegionNumber) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(RegionNumber)); + + /* Set the Region number */ + MPU->RNR = RegionNumber; + + /* Disable the Region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Initialize and configure the Region and the memory to be protected. + * @param MPU_Init: Pointer to a MPU_Region_InitTypeDef structure that contains + * the initialization and configuration information. + * @retval None + */ +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); + assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); + assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); + assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); + assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); + assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); + assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); + assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); + assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); + assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); + /* Set the Region number */ + MPU->RNR = MPU_Init->Number; + +/* Disable the Region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); + + /* Apply configuration */ + MPU->RBAR = MPU_Init->BaseAddress; + MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | + ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | + ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | + ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | + ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | + ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | + ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | + ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | + ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); +} +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c new file mode 100644 index 0000000..c9927db --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma.c @@ -0,0 +1,1174 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Channel + (except for internal SRAM / FLASH memories: no initialization is + necessary). Please refer to the Reference manual for connection between peripherals + and DMA requests. + + (#) For a given Channel, program the required configuration through the following parameters: + Channel request, Transfer Direction, Source and Destination data formats, + Circular or Normal mode, Channel Priority level, Source and Destination Increment mode + using HAL_DMA_Init() function. + + Prior to HAL_DMA_Init the peripheral clock shall be enabled for both DMA & DMAMUX + thanks to: + (##) DMA1 or DMA2: __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE() ; + (##) DMAMUX1: __HAL_RCC_DMAMUX1_CLK_ENABLE(); + + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. + In this case the DMA interrupt is configured + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function to register callbacks with HAL_DMA_RegisterCallback(). + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. + (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. + (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags. + (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. + (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. + (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt is enabled or not. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup DMA_Private_Functions DMA Private Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +#if defined(DMAMUX1) +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma); +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma); +#endif /* DMAMUX1 */ + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Channel source + and destination addresses, incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Channel priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and initialize the associated handle. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + uint32_t tmp; + + /* Check the DMA handle allocation */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + + assert_param(IS_DMA_ALL_REQUEST(hdma->Init.Request)); + + /* Compute the channel index */ + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA2; + } + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Get the CR register value */ + tmp = hdma->Instance->CCR; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR and MEM2MEM bits */ + tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | + DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); + + /* Prepare the DMA Channel configuration */ + tmp |= hdma->Init.Direction | + hdma->Init.PeriphInc | hdma->Init.MemInc | + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | + hdma->Init.Mode | hdma->Init.Priority; + + /* Write to DMA Channel CR register */ + hdma->Instance->CCR = tmp; + +#if defined(DMAMUX1) + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask + */ + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + /* if memory to memory force the request to 0*/ + hdma->Init.Request = DMA_REQUEST_MEM2MEM; + } + + /* Set peripheral request to DMAMUX channel */ + hdma->DMAmuxChannel->CCR = (hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (((hdma->Init.Request > 0U) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask + */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register*/ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + else + { + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + } +#endif /* DMAMUX1 */ + +#if !defined (DMAMUX1) + + /* Set request selection */ + if (hdma->Init.Direction != DMA_MEMORY_TO_MEMORY) + { + /* Write to DMA channel selection register */ + if (DMA1 == hdma->DmaBaseAddress) + { + /* Reset request selection for DMA1 Channelx */ + DMA1_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU)); + + /* Configure request selection for DMA1 Channelx */ + DMA1_CSELR->CSELR |= (uint32_t)(hdma->Init.Request << (hdma->ChannelIndex & 0x1cU)); + } + else /* DMA2 */ + { + /* Reset request selection for DMA2 Channelx */ + DMA2_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU)); + + /* Configure request selection for DMA2 Channelx */ + DMA2_CSELR->CSELR |= (uint32_t)(hdma->Init.Request << (hdma->ChannelIndex & 0x1cU)); + } + } + +#endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */ + /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L442xx || STM32L486xx */ + /* STM32L496xx || STM32L4A6xx */ + + /* Initialise the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + + /* Allocate lock resource and initialize it */ + hdma->Lock = HAL_UNLOCKED; + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA peripheral. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + + /* Check the DMA handle allocation */ + if (NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Channelx */ + __HAL_DMA_DISABLE(hdma); + + /* Compute the channel index */ + if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) + { + /* DMA1 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA1; + } + else + { + /* DMA2 */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2U; + hdma->DmaBaseAddress = DMA2; + } + + /* Reset DMA Channel control register */ + hdma->Instance->CCR = 0U; + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + +#if !defined (DMAMUX1) + + /* Reset DMA channel selection register */ + if (DMA1 == hdma->DmaBaseAddress) + { + /* DMA1 */ + DMA1_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU)); + } + else + { + /* DMA2 */ + DMA2_CSELR->CSELR &= ~(DMA_CSELR_C1S << (hdma->ChannelIndex & 0x1cU)); + } +#endif /* STM32L431xx || STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx */ + /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L442xx || STM32L486xx */ + /* STM32L496xx || STM32L4A6xx */ + +#if defined(DMAMUX1) + + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask */ + + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + /* Reset the DMAMUX channel that corresponds to the DMA channel */ + hdma->DMAmuxChannel->CCR = 0U; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Reset Request generator parameters if any */ + if (((hdma->Init.Request > 0U) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask + */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register*/ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + +#endif /* DMAMUX1 */ + + /* Clean callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Initialise the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions + * @brief Input and Output operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA Transfer. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the transfer complete interrupt */ + /* Enable the transfer Error interrupt */ + if (NULL != hdma->XferHalfCpltCallback) + { + /* Enable the Half transfer complete interrupt as well */ + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + } + else + { + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_TE)); + } + +#ifdef DMAMUX1 + + /* Check if DMAMUX Synchronization is enabled*/ + if ((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U) + { + /* Enable DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE; + } + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/ + /* enable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + } + +#endif /* DMAMUX1 */ + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Remain BUSY */ + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Abort the DMA Transfer. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the DMA peripheral state */ + if (hdma->State != HAL_DMA_STATE_BUSY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + +#if defined(DMAMUX1) + /* disable the DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; +#endif /* DMAMUX1 */ + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + +#if defined(DMAMUX1) + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + +#endif /* DMAMUX1 */ + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return status; + } +} + +/** + * @brief Aborts the DMA Transfer in Interrupt mode. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + status = HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + +#if defined(DMAMUX1) + /* disable the DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + +#else + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); +#endif /* DMAMUX1 */ + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if (hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + return status; +} + +/** + * @brief Polling for transfer complete. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CompleteLevel Specifies the DMA level complete. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) +{ + uint32_t temp; + uint32_t tickstart; + + if (HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + /* Polling mode not supported in circular mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != 0U) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Transfer Complete flag */ + temp = DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU); + } + else + { + /* Half Transfer Complete flag */ + temp = DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + while ((hdma->DmaBaseAddress->ISR & temp) == 0U) + { + if ((hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU))) != 0U) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + } + +#if defined(DMAMUX1) + /*Check for DMAMUX Request generator (if used) overrun status */ + if (hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator Check for DMAMUX request generator overrun */ + if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + } + } + + /* Check for DMAMUX Synchronization overrun */ + if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + } +#endif /* DMAMUX1 */ + + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Clear the transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU)); + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + /* The selected Channelx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + hdma->State = HAL_DMA_STATE_READY; + } + else + { + /* Clear the half transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU)); + } + + return HAL_OK; +} + +/** + * @brief Handle DMA interrupt request. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ + uint32_t flag_it = hdma->DmaBaseAddress->ISR; + uint32_t source_it = hdma->Instance->CCR; + + /* Half Transfer Complete Interrupt management ******************************/ + if (((flag_it & (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_HT) != 0U)) + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + } + /* Clear the half transfer complete flag */ + hdma->DmaBaseAddress->IFCR = DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x1CU); + + /* DMA peripheral state is not updated in Half Transfer */ + /* but in Transfer Complete case */ + + if (hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if (((flag_it & (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_TC) != 0U)) + { + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */ + /* Disable the transfer complete and error interrupt */ + /* if the DMA mode is not CIRCULAR */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + } + /* Clear the transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_TCIF1 << (hdma->ChannelIndex & 0x1CU)); + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + + /* Transfer Error Interrupt management **************************************/ + else if (((flag_it & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1CU))) != 0U) && ((source_it & DMA_IT_TE) != 0U)) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Disable ALL DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + else + { + /* Nothing To Do */ + } + return; +} + +/** + * @brief Register callbacks + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @param pCallback pointer to private callback function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + + + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the DMA handle state. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + /* Return DMA handle state */ + return hdma->State; +} + +/** + * @brief Return the DMA error code. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the DMA Transfer parameter. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ +#if defined(DMAMUX1) + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if (hdma->DMAmuxRequestGen != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } +#endif + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU)); + + /* Configure DMA Channel data length */ + hdma->Instance->CNDTR = DataLength; + + /* Memory to Peripheral */ + if ((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + hdma->Instance->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + hdma->Instance->CMAR = SrcAddress; + } + /* Peripheral to Memory */ + else + { + /* Configure DMA Channel source address */ + hdma->Instance->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + hdma->Instance->CMAR = DstAddress; + } +} + +#if defined(DMAMUX1) + +/** + * @brief Updates the DMA handle with the DMAMUX channel and status mask depending on channel number + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t channel_number; + + /* check if instance is not outside the DMA channel range */ + if ((uint32_t)hdma->Instance < (uint32_t)DMA2_Channel1) + { + /* DMA1 */ + hdma->DMAmuxChannel = (DMAMUX1_Channel0 + (hdma->ChannelIndex >> 2U)); + } + else + { + /* DMA2 */ + hdma->DMAmuxChannel = (DMAMUX1_Channel7 + (hdma->ChannelIndex >> 2U)); + } + + channel_number = (((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U; + hdma->DMAmuxChannelStatus = DMAMUX1_ChannelStatus; + hdma->DMAmuxChannelStatusMask = 1UL << (channel_number & 0x1FU); +} + +/** + * @brief Updates the DMA handle with the DMAMUX request generator params + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ + +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t request = hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID; + + /* DMA Channels are connected to DMAMUX1 request generator blocks*/ + hdma->DMAmuxRequestGen = (DMAMUX_RequestGen_TypeDef *)((uint32_t)(((uint32_t)DMAMUX1_RequestGenerator0) + ((request - 1U) * 4U))); + + hdma->DMAmuxRequestGenStatus = DMAMUX1_RequestGenStatus; + + /* here "Request" is either DMA_REQUEST_GENERATOR0 to DMA_REQUEST_GENERATOR3, i.e. <= 4*/ + hdma->DMAmuxRequestGenStatusMask = 1UL << ((request - 1U) & 0x3U); +} + +#endif /* DMAMUX1 */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c new file mode 100644 index 0000000..260d972 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_dma_ex.c @@ -0,0 +1,307 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_dma_ex.c + * @author MCD Application Team + * @brief DMA Extension HAL module driver + * This file provides firmware functions to manage the following + * functionalities of the DMA Extension peripheral: + * + Extended features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The DMA Extension HAL driver can be used as follows: + + (+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + + (+) To handle the DMAMUX Interrupts, the function HAL_DMAEx_MUX_IRQHandler should be called from + the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler. + As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMAEx_MUX_IRQHandler should be + called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project + (exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator) + + -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed. + -@- When Multi (Double) Buffer mode is enabled, the transfer is circular by default. + -@- In Multi (Double) buffer mode, it is possible to update the base address for + the AHB memory port on the fly (DMA_CM0ARx or DMA_CM1ARx) when the channel is enabled. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +#if defined(DMAMUX1) + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @brief DMA Extended HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private Constants ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + + +/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions + * @{ + */ + +/** @defgroup DMAEx_Exported_Functions_Group1 DMAEx Extended features functions + * @brief Extended features functions + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + + (+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + +@endverbatim + * @{ + */ + + +/** + * @brief Configure the DMAMUX synchronization parameters for a given DMA channel (instance). + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @param pSyncConfig : pointer to HAL_DMA_MuxSyncConfigTypeDef : contains the DMAMUX synchronization parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + assert_param(IS_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID)); + + assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig-> SyncPolarity)); + assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable)); + assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable)); + assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber)); + + /*Check if the DMA state is ready */ + if (hdma->State == HAL_DMA_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the new synchronization parameters (and keep the request ID filled during the Init)*/ + MODIFY_REG(hdma->DMAmuxChannel->CCR, \ + (~DMAMUX_CxCR_DMAREQ_ID), \ + ((pSyncConfig->SyncSignalID) << DMAMUX_CxCR_SYNC_ID_Pos) | ((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \ + pSyncConfig->SyncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos) | \ + ((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos)); + + /* Process UnLocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + /*DMA State not Ready*/ + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @param pRequestGeneratorConfig : pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef : + * contains the request generator parameters. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + assert_param(IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID)); + + assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity)); + assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State == HAL_DMA_STATE_READY) && (hdma->DMAmuxRequestGen != 0U)) + { + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the request generator new parameters */ + hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \ + ((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos) | \ + pRequestGeneratorConfig->Polarity; + /* Process UnLocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) + { + + /* Enable the request generator*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the DMAMUX request generator block used by the given DMA channel (instance). + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0)) + { + + /* Disable the request generator*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handles DMAMUX interrupt request. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA channel. + * @retval None + */ +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma) +{ + /* Check for DMAMUX Synchronization overrun */ + if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Disable the synchro overrun interrupt */ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + + if (hdma->DMAmuxRequestGen != 0) + { + /* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */ + if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + } +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMAMUX1 */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c new file mode 100644 index 0000000..a546ca1 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_exti.c @@ -0,0 +1,638 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_exti.c + * @author MCD Application Team + * @brief EXTI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Extended Interrupts and events controller (EXTI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2018 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### EXTI Peripheral features ##### + ============================================================================== + [..] + (+) Each Exti line can be configured within this driver. + + (+) Exti line can be configured in 3 different modes + (++) Interrupt + (++) Event + (++) Both of them + + (+) Configurable Exti lines can be configured with 3 different triggers + (++) Rising + (++) Falling + (++) Both of them + + (+) When set in interrupt mode, configurable Exti lines have two different + interrupts pending registers which allow to distinguish which transition + occurs: + (++) Rising edge pending interrupt + (++) Falling + + (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can + be selected through multiplexer. + + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). + (++) Choose the interrupt line number by setting "Line" member from + EXTI_ConfigTypeDef structure. + (++) Configure the interrupt and/or event mode using "Mode" member from + EXTI_ConfigTypeDef structure. + (++) For configurable lines, configure rising and/or falling trigger + "Trigger" member from EXTI_ConfigTypeDef structure. + (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" + member from GPIO_InitTypeDef structure. + + (#) Get current Exti configuration of a dedicated line using + HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. + + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_ClearConfigLine(). + (++) Provide exiting handle as parameter. + + (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + EXTI_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Get interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Clear interrupt pending bit using HAL_EXTI_ClearPending(). + + (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rule: + * Rule-18.1_b - Medium: Array `EXTICR' 1st subscript interval [0,7] may be out + * of bounds [0,3] in following API : + * HAL_EXTI_SetConfigLine + * HAL_EXTI_GetConfigLine + * HAL_EXTI_ClearConfigLine + */ + +#ifdef HAL_EXTI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +#define EXTI_MODE_OFFSET 0x08u /* 0x20: offset between MCU IMR/EMR registers */ +#define EXTI_CONFIG_OFFSET 0x08u /* 0x20: offset between MCU Rising/Falling configuration registers */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup EXTI_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_Exported_Functions_Group1 + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Set configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on EXTI configuration to be set. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_EXTI_LINE(pExtiConfig->Line)); + assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); + + /* Assign line number to handle */ + hexti->Line = pExtiConfig->Line; + + /* Compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* Configure triggers for configurable lines */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); + + /* Configure rising trigger */ + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store rising trigger mode */ + *regaddr = regval; + + /* Configure falling trigger */ + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store falling trigger mode */ + *regaddr = regval; + + /* Configure gpio port selection in case of gpio exti line */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + SYSCFG->EXTICR[linepos >> 2u] = regval; + } + } + + /* Configure interrupt mode : read current mode */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store interrupt mode */ + *regaddr = regval; + + /* The event mode cannot be configured if the line does not support it */ + assert_param(((pExtiConfig->Line & EXTI_EVENT) == EXTI_EVENT) || ((pExtiConfig->Mode & EXTI_MODE_EVENT) != EXTI_MODE_EVENT)); + + /* Configure event mode : read current mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00u) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store event mode */ + *regaddr = regval; + + return HAL_OK; +} + + +/** + * @brief Get configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on structure to store Exti configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* Store handle line number to configuration structure */ + pExtiConfig->Line = hexti->Line; + + /* Compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Get core mode : interrupt */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Mode = EXTI_MODE_INTERRUPT; + } + else + { + pExtiConfig->Mode = EXTI_MODE_NONE; + } + + /* Get event mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Mode |= EXTI_MODE_EVENT; + } + + /* Get default Trigger and GPIOSel configuration */ + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00u; + + /* 2] Get trigger for configurable lines : rising */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u) + { + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Trigger = EXTI_TRIGGER_RISING; + } + + /* Get falling configuration */ + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00u) + { + pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; + } + + /* Get Gpio port selection for gpio lines */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + pExtiConfig->GPIOSel = (regval >> (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))) & SYSCFG_EXTICR1_EXTI0; + } + } + + return HAL_OK; +} + + +/** + * @brief Clear whole configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* 1] Clear interrupt mode */ + regaddr = (&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 2] Clear event mode */ + regaddr = (&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 3] Clear triggers in case of configurable lines */ + if ((hexti->Line & EXTI_CONFIG) != 0x00u) + { + regaddr = (&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* Get Gpio port selection for gpio lines */ + if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[linepos >> 2u]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))); + SYSCFG->EXTICR[linepos >> 2u] = regval; + } + } + + return HAL_OK; +} + + +/** + * @brief Register callback for a dedicated Exti line. + * @param hexti Exti handle. + * @param CallbackID User callback identifier. + * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. + * @param pPendingCbfn function pointer to be stored as callback. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) +{ + HAL_StatusTypeDef status = HAL_OK; + + switch (CallbackID) + { + case HAL_EXTI_COMMON_CB_ID: + hexti->PendingCallback = pPendingCbfn; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Store line number as handle private field. + * @param hexti Exti handle. + * @param ExtiLine Exti line number. + * This parameter can be from 0 to @ref EXTI_LINE_NB. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(ExtiLine)); + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + else + { + /* Store line number as handle private field */ + hexti->Line = ExtiLine; + + return HAL_OK; + } +} + + +/** + * @} + */ + +/** @addtogroup EXTI_Exported_Functions_Group2 + * @brief EXTI IO functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Handle EXTI interrupt request. + * @param hexti Exti handle. + * @retval none. + */ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t maskline; + uint32_t offset; + + /* Compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get pending bit */ + regaddr = (&EXTI->PR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & maskline); + + if (regval != 0x00u) + { + /* Clear pending bit */ + *regaddr = maskline; + + /* Call callback */ + if (hexti->PendingCallback != NULL) + { + hexti->PendingCallback(); + } + } +} + + +/** + * @brief Get interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be checked. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval 1 if interrupt is pending else 0. + */ +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Edge); + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* Compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1uL << linepos); + + /* Get pending bit */ + regaddr = (&EXTI->PR1 + (EXTI_CONFIG_OFFSET * offset)); + + /* return 1 if bit is set else 0 */ + regval = ((*regaddr & maskline) >> linepos); + return regval; +} + + +/** + * @brief Clear interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be clear. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval None. + */ +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Edge); + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + /* Get pending register address */ + regaddr = (&EXTI->PR1 + (EXTI_CONFIG_OFFSET * offset)); + + /* Clear Pending bit */ + *regaddr = maskline; +} + + +/** + * @brief Generate a software interrupt for a dedicated line. + * @param hexti Exti handle. + * @retval None. + */ +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1uL << (hexti->Line & EXTI_PIN_MASK)); + + regaddr = (&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset)); + *regaddr = maskline; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_EXTI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c new file mode 100644 index 0000000..75fa3ea --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash.c @@ -0,0 +1,764 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral Errors functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + + [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The Flash memory interface accelerates code execution with a system of instruction + prefetch and cache lines. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Option bytes programming + (+) Prefetch on I-Code + (+) 32 cache lines of 4*64 bits on I-Code + (+) 8 cache lines of 4*64 bits on D-Code + (+) Error code correction (ECC) : Data in flash are 72-bits word + (8 bits added per double word) + + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32L4xx devices. + + (#) Flash Memory IO Programming functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Program functions: double word and fast program (full row programming) + (++) There Two modes of programming : + (+++) Polling mode using HAL_FLASH_Program() function + (+++) Interrupt mode using HAL_FLASH_Program_IT() function + + (#) Interrupts and flags management functions : + (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() + (++) Callback functions are called when the flash operations are finished : + HAL_FLASH_EndOfOperationCallback() when everything is ok, otherwise + HAL_FLASH_OperationErrorCallback() + (++) Get error flag status by calling HAL_GetError() + + (#) Option bytes management functions : + (++) Lock and Unlock the option bytes using HAL_FLASH_OB_Unlock() and + HAL_FLASH_OB_Lock() functions + (++) Launch the reload of the option bytes using HAL_FLASH_Launch() function. + In this case, a reset is generated + + [..] + In addition to these functions, this driver includes a set of macros allowing + to handle the following operations: + (+) Set the latency + (+) Enable/Disable the prefetch buffer + (+) Enable/Disable the Instruction cache and the Data cache + (+) Reset the Instruction cache and the Data cache + (+) Enable/Disable the Flash power-down during low-power run and sleep modes + (+) Enable/Disable the Flash interrupts + (+) Monitor the Flash flags status + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define FLASH_NB_DOUBLE_WORDS_IN_ROW 64 +#else +#define FLASH_NB_DOUBLE_WORDS_IN_ROW 32 +#endif +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +/** + * @brief Variable used for Program/Erase sectors under interruption + */ +FLASH_ProcessTypeDef pFlash = {.Lock = HAL_UNLOCKED, \ + .ErrorCode = HAL_FLASH_ERROR_NONE, \ + .ProcedureOnGoing = FLASH_PROC_NONE, \ + .Address = 0U, \ + .Bank = FLASH_BANK_1, \ + .Page = 0U, \ + .NbPagesToErase = 0U, \ + .CacheToReactivate = FLASH_CACHE_DISABLED}; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data); +static void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim + =============================================================================== + ##### Programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the FLASH + program operations. + +@endverbatim + * @{ + */ + +/** + * @brief Program double word or fast program of a row at a specified address. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address specifies the address to be programmed. + * @param Data specifies the data to be programmed + * This parameter is the data for the double word program and the address where + * are stored the data for the row fast program + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status; + uint32_t prog_bit = 0; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Deactivate the data cache if they are activated to avoid data misbehavior */ + if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED; + } + else + { + pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; + } + + if(TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) + { + /* Program double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, Data); + prog_bit = FLASH_CR_PG; + } + else if((TypeProgram == FLASH_TYPEPROGRAM_FAST) || (TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST)) + { + /* Fast program a 32 row double-word (64-bit) at a specified address */ + FLASH_Program_Fast(Address, (uint32_t)Data); + + /* If it is the last row, the bit will be cleared at the end of the operation */ + if(TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST) + { + prog_bit = FLASH_CR_FSTPG; + } + } + else + { + /* Nothing to do */ + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the program operation is completed, disable the PG or FSTPG Bit */ + if (prog_bit != 0U) + { + CLEAR_BIT(FLASH->CR, prog_bit); + } + + /* Flush the caches to be sure of the data consistency */ + FLASH_FlushCaches(); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Program double word or fast program of a row at a specified address with interrupt enabled. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param Address specifies the address to be programmed. + * @param Data specifies the data to be programmed + * This parameter is the data for the double word program and the address where + * are stored the data for the row fast program + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Deactivate the data cache if they are activated to avoid data misbehavior */ + if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED; + } + else + { + pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; + } + + /* Set internal variables used by the IRQ handler */ + if(TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST) + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM_LAST; + } + else + { + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM; + } + pFlash.Address = Address; + + /* Enable End of Operation and Error interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); + + if(TypeProgram == FLASH_TYPEPROGRAM_DOUBLEWORD) + { + /* Program double-word (64-bit) at a specified address */ + FLASH_Program_DoubleWord(Address, Data); + } + else if((TypeProgram == FLASH_TYPEPROGRAM_FAST) || (TypeProgram == FLASH_TYPEPROGRAM_FAST_AND_LAST)) + { + /* Fast program a 32 row double-word (64-bit) at a specified address */ + FLASH_Program_Fast(Address, (uint32_t)Data); + } + else + { + /* Nothing to do */ + } + + return status; +} + +/** + * @brief Handle FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t tmp_page; + uint32_t error; + FLASH_ProcedureTypeDef procedure; + + /* If the operation is completed, disable the PG, PNB, MER1, MER2 and PER Bit */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_MER1 | FLASH_CR_PER | FLASH_CR_PNB)); +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + CLEAR_BIT(FLASH->CR, FLASH_CR_MER2); +#endif + + /* Disable the FSTPG Bit only if it is the last row programmed */ + if(pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAM_LAST) + { + CLEAR_BIT(FLASH->CR, FLASH_CR_FSTPG); + } + + /* Check FLASH operation error flags */ + error = (FLASH->SR & FLASH_FLAG_SR_ERRORS); + + if (error !=0U) + { + /*Save the error code*/ + pFlash.ErrorCode |= error; + + /* Clear error programming flags */ + __HAL_FLASH_CLEAR_FLAG(error); + + /* Flush the caches to be sure of the data consistency */ + FLASH_FlushCaches() ; + + /* FLASH error interrupt user callback */ + procedure = pFlash.ProcedureOnGoing; + if(procedure == FLASH_PROC_PAGE_ERASE) + { + HAL_FLASH_OperationErrorCallback(pFlash.Page); + } + else if(procedure == FLASH_PROC_MASS_ERASE) + { + HAL_FLASH_OperationErrorCallback(pFlash.Bank); + } + else if((procedure == FLASH_PROC_PROGRAM) || + (procedure == FLASH_PROC_PROGRAM_LAST)) + { + HAL_FLASH_OperationErrorCallback(pFlash.Address); + } + else + { + HAL_FLASH_OperationErrorCallback(0U); + } + + /*Stop the procedure ongoing*/ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + + /* Check FLASH End of Operation flag */ + if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != 0U) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + + if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGE_ERASE) + { + /* Nb of pages to erased can be decreased */ + pFlash.NbPagesToErase--; + + /* Check if there are still pages to erase*/ + if(pFlash.NbPagesToErase != 0U) + { + /* Indicate user which page has been erased*/ + HAL_FLASH_EndOfOperationCallback(pFlash.Page); + + /* Increment page number */ + pFlash.Page++; + tmp_page = pFlash.Page; + FLASH_PageErase(tmp_page, pFlash.Bank); + } + else + { + /* No more pages to Erase */ + /* Reset Address and stop Erase pages procedure */ + pFlash.Page = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + + /* Flush the caches to be sure of the data consistency */ + FLASH_FlushCaches() ; + + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Page); + } + } + else + { + /* Flush the caches to be sure of the data consistency */ + FLASH_FlushCaches() ; + + procedure = pFlash.ProcedureOnGoing; + if(procedure == FLASH_PROC_MASS_ERASE) + { + /* MassErase ended. Return the selected bank */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Bank); + } + else if((procedure == FLASH_PROC_PROGRAM) || + (procedure == FLASH_PROC_PROGRAM_LAST)) + { + /* Program ended. Return the selected address */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + else + { + /* Nothing to do */ + } + + /*Clear the procedure ongoing*/ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + } + } + + if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) + { + /* Disable End of Operation and Error interrupts */ + __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: Bank number which has been requested to erase + * Page Erase: Page which has been erased + * (if 0xFFFFFFFF, it means that all the selected pages have been erased) + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: Bank number which has been requested to erase + * Page Erase: Page number which returned an error + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief Management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0U) + { + /* Authorize the FLASH Registers access */ + WRITE_REG(FLASH->KEYR, FLASH_KEY1); + WRITE_REG(FLASH->KEYR, FLASH_KEY2); + + /* Verify Flash is unlocked */ + if(READ_BIT(FLASH->CR, FLASH_CR_LOCK) != 0U) + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Lock the FLASH control register access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + /* Set the LOCK Bit to lock the FLASH Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_LOCK); + + return HAL_OK; +} + +/** + * @brief Unlock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + if(READ_BIT(FLASH->CR, FLASH_CR_OPTLOCK) != 0U) + { + /* Authorizes the Option Byte register programming */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Lock the FLASH Option Bytes Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ + SET_BIT(FLASH->CR, FLASH_CR_OPTLOCK); + + return HAL_OK; +} + +/** + * @brief Launch the option byte loading. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) +{ + /* Set the bit to force the option byte reloading */ + SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH); + + /* Wait for last operation to be completed */ + return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE)); +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time Errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode: The returned value can be: + * @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP) + * @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag + * @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag + * @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag + * @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag + * @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag + * @arg HAL_FLASH_ERROR_NONE: No error set + * @arg HAL_FLASH_ERROR_OP: FLASH Operation error + * @arg HAL_FLASH_ERROR_PROG: FLASH Programming error + * @arg HAL_FLASH_ERROR_WRP: FLASH Write protection error + * @arg HAL_FLASH_ERROR_PGA: FLASH Programming alignment error + * @arg HAL_FLASH_ERROR_SIZ: FLASH Size error + * @arg HAL_FLASH_ERROR_PGS: FLASH Programming sequence error + * @arg HAL_FLASH_ERROR_MIS: FLASH Fast programming data miss error + * @arg HAL_FLASH_ERROR_FAST: FLASH Fast programming error + * @arg HAL_FLASH_ERROR_RD: FLASH PCROP read error + * @arg HAL_FLASH_ERROR_OPTV: FLASH Option validity error + * @arg FLASH_FLAG_PEMPTY : FLASH Boot from not programmed flash (apply only for STM32L43x/STM32L44x devices) + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. + Even if the FLASH operation fails, the BUSY flag will be reset and an error + flag will be set */ + + uint32_t tickstart = HAL_GetTick(); + uint32_t error; + + while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY)) + { + if(Timeout != HAL_MAX_DELAY) + { + if((HAL_GetTick() - tickstart) >= Timeout) + { + return HAL_TIMEOUT; + } + } + } + + error = (FLASH->SR & FLASH_FLAG_SR_ERRORS); + + if(error != 0u) + { + /*Save the error code*/ + pFlash.ErrorCode |= error; + + /* Clear error programming flags */ + __HAL_FLASH_CLEAR_FLAG(error); + + return HAL_ERROR; + } + + /* Check FLASH End of Operation flag */ + if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); + } + + /* If there is an error flag set */ + return HAL_OK; +} + +/** + * @brief Program double-word (64-bit) at a specified address. + * @param Address specifies the address to be programmed. + * @param Data specifies the data to be programmed. + * @retval None + */ +static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data) +{ + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Set PG bit */ + SET_BIT(FLASH->CR, FLASH_CR_PG); + + /* Program first word */ + *(__IO uint32_t*)Address = (uint32_t)Data; + + /* Barrier to ensure programming is performed in 2 steps, in right order + (independently of compiler optimization behavior) */ + __ISB(); + + /* Program second word */ + *(__IO uint32_t*)(Address+4U) = (uint32_t)(Data >> 32); +} + +/** + * @brief Fast program a row double-word (64-bit) at a specified address. + * @param Address specifies the address to be programmed. + * @param DataAddress specifies the address where the data are stored. + * @retval None + */ +static void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress) +{ + uint32_t primask_bit; + uint8_t row_index = (2*FLASH_NB_DOUBLE_WORDS_IN_ROW); + __IO uint32_t *dest_addr = (__IO uint32_t*)Address; + __IO uint32_t *src_addr = (__IO uint32_t*)DataAddress; + + /* Check the parameters */ + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(Address)); + + /* Set FSTPG bit */ + SET_BIT(FLASH->CR, FLASH_CR_FSTPG); + + /* Disable interrupts to avoid any interruption during the loop */ + primask_bit = __get_PRIMASK(); + __disable_irq(); + + /* Program the double word of the row */ + do + { + *dest_addr = *src_addr; + dest_addr++; + src_addr++; + row_index--; + } while (row_index != 0U); + + /* Re-enable the interrupts */ + __set_PRIMASK(primask_bit); +} + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c new file mode 100644 index 0000000..d9b1205 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ex.c @@ -0,0 +1,1316 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the FLASH extended peripheral: + * + Extended programming operations functions + * + @verbatim + ============================================================================== + ##### Flash Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the FLASH interface for STM32L4xx + devices contains the following additional features + + (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write + capability (RWW) + (+) Dual bank memory organization + (+) PCROP protection for all banks + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32L4xx devices. It includes + (#) Flash Memory Erase functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Erase function: Erase page, erase all sectors + (++) There are two modes of erase : + (+++) Polling Mode using HAL_FLASHEx_Erase() + (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() + + (#) Option Bytes Programming function: Use HAL_FLASHEx_OBProgram() to : + (++) Set/Reset the write protection + (++) Set the Read protection Level + (++) Program the user Option Bytes + (++) Configure the PCROP protection + + (#) Get Option Bytes Configuration function: Use HAL_FLASHEx_OBGetConfig() to : + (++) Get the value of a write protection area + (++) Know if the read protection is activated + (++) Get the value of the user Option Bytes + (++) Get the value of a PCROP area + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH Extended HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +static void FLASH_MassErase(uint32_t Banks); +static HAL_StatusTypeDef FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset); +static HAL_StatusTypeDef FLASH_OB_RDPConfig(uint32_t RDPLevel); +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig); +static HAL_StatusTypeDef FLASH_OB_PCROPConfig(uint32_t PCROPConfig, uint32_t PCROPStartAddr, uint32_t PCROPEndAddr); +static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t * WRPStartOffset, uint32_t * WRDPEndOffset); +static uint32_t FLASH_OB_GetRDP(void); +static uint32_t FLASH_OB_GetUser(void); +static void FLASH_OB_GetPCROP(uint32_t * PCROPConfig, uint32_t * PCROPStartAddr, uint32_t * PCROPEndAddr); +/** + * @} + */ + +/* Exported functions -------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### Extended programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extended FLASH + programming operations Operations. + +@endverbatim + * @{ + */ +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages. + * @param[in] pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @param[out] PageError : pointer to variable that contains the configuration + * information on faulty page in case of error (0xFFFFFFFF means that all + * the pages have been correctly erased) + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) +{ + HAL_StatusTypeDef status; + uint32_t page_index; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Deactivate the cache if they are activated to avoid data misbehavior */ + if(READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U) + { + if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + pFlash.CacheToReactivate = FLASH_CACHE_ICACHE_DCACHE_ENABLED; + } + else + { + pFlash.CacheToReactivate = FLASH_CACHE_ICACHE_ENABLED; + } + } + else if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED; + } + else + { + pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; + } + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /* Mass erase to be done */ + FLASH_MassErase(pEraseInit->Banks); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + /* If the erase operation is completed, disable the MER1 and MER2 Bits */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_MER1 | FLASH_CR_MER2)); +#else + /* If the erase operation is completed, disable the MER1 Bit */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_MER1)); +#endif + } + else + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + for(page_index = pEraseInit->Page; page_index < (pEraseInit->Page + pEraseInit->NbPages); page_index++) + { + FLASH_PageErase(page_index, pEraseInit->Banks); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the erase operation is completed, disable the PER Bit */ + CLEAR_BIT(FLASH->CR, (FLASH_CR_PER | FLASH_CR_PNB)); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = page_index; + break; + } + } + } + + /* Flush the caches to be sure of the data consistency */ + FLASH_FlushCaches(); + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled. + * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Deactivate the cache if they are activated to avoid data misbehavior */ + if(READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U) + { + if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + pFlash.CacheToReactivate = FLASH_CACHE_ICACHE_DCACHE_ENABLED; + } + else + { + pFlash.CacheToReactivate = FLASH_CACHE_ICACHE_ENABLED; + } + } + else if(READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + pFlash.CacheToReactivate = FLASH_CACHE_DCACHE_ENABLED; + } + else + { + pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; + } + + /* Enable End of Operation and Error interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_OPERR); + + pFlash.Bank = pEraseInit->Banks; + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /* Mass erase to be done */ + pFlash.ProcedureOnGoing = FLASH_PROC_MASS_ERASE; + FLASH_MassErase(pEraseInit->Banks); + } + else + { + /* Erase by page to be done */ + pFlash.ProcedureOnGoing = FLASH_PROC_PAGE_ERASE; + pFlash.NbPagesToErase = pEraseInit->NbPages; + pFlash.Page = pEraseInit->Page; + + /*Erase 1st page and wait for IT */ + FLASH_PageErase(pEraseInit->Page, pEraseInit->Banks); + } + + return status; +} + +/** + * @brief Program Option bytes. + * @param pOBInit pointer to an FLASH_OBInitStruct structure that + * contains the configuration information for the programming. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Write protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_WRP) != 0U) + { + /* Configure of Write protection on the selected area */ + if(FLASH_OB_WRPConfig(pOBInit->WRPArea, pOBInit->WRPStartOffset, pOBInit->WRPEndOffset) != HAL_OK) + { + status = HAL_ERROR; + } + + } + + /* Read protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_RDP) != 0U) + { + /* Configure the Read protection level */ + if(FLASH_OB_RDPConfig(pOBInit->RDPLevel) != HAL_OK) + { + status = HAL_ERROR; + } + } + + /* User Configuration */ + if((pOBInit->OptionType & OPTIONBYTE_USER) != 0U) + { + /* Configure the user option bytes */ + if(FLASH_OB_UserConfig(pOBInit->USERType, pOBInit->USERConfig) != HAL_OK) + { + status = HAL_ERROR; + } + } + + /* PCROP Configuration */ + if((pOBInit->OptionType & OPTIONBYTE_PCROP) != 0U) + { + if (pOBInit->PCROPStartAddr != pOBInit->PCROPEndAddr) + { + /* Configure the Proprietary code readout protection */ + if(FLASH_OB_PCROPConfig(pOBInit->PCROPConfig, pOBInit->PCROPStartAddr, pOBInit->PCROPEndAddr) != HAL_OK) + { + status = HAL_ERROR; + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Get the Option bytes configuration. + * @param pOBInit pointer to an FLASH_OBInitStruct structure that contains the + * configuration information. + * @note The fields pOBInit->WRPArea and pOBInit->PCROPConfig should indicate + * which area is requested for the WRP and PCROP, else no information will be returned + * + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = (OPTIONBYTE_RDP | OPTIONBYTE_USER); + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if((pOBInit->WRPArea == OB_WRPAREA_BANK1_AREAA) || (pOBInit->WRPArea == OB_WRPAREA_BANK1_AREAB) || + (pOBInit->WRPArea == OB_WRPAREA_BANK2_AREAA) || (pOBInit->WRPArea == OB_WRPAREA_BANK2_AREAB)) +#else + if((pOBInit->WRPArea == OB_WRPAREA_BANK1_AREAA) || (pOBInit->WRPArea == OB_WRPAREA_BANK1_AREAB)) +#endif + { + pOBInit->OptionType |= OPTIONBYTE_WRP; + /* Get write protection on the selected area */ + FLASH_OB_GetWRP(pOBInit->WRPArea, &(pOBInit->WRPStartOffset), &(pOBInit->WRPEndOffset)); + } + + /* Get Read protection level */ + pOBInit->RDPLevel = FLASH_OB_GetRDP(); + + /* Get the user option bytes */ + pOBInit->USERConfig = FLASH_OB_GetUser(); + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if((pOBInit->PCROPConfig == FLASH_BANK_1) || (pOBInit->PCROPConfig == FLASH_BANK_2)) +#else + if(pOBInit->PCROPConfig == FLASH_BANK_1) +#endif + { + pOBInit->OptionType |= OPTIONBYTE_PCROP; + /* Get the Proprietary code readout protection */ + FLASH_OB_GetPCROP(&(pOBInit->PCROPConfig), &(pOBInit->PCROPStartAddr), &(pOBInit->PCROPEndAddr)); + } +} + +/** + * @} + */ + +#if defined (FLASH_CFGR_LVEN) +/** @defgroup FLASHEx_Exported_Functions_Group2 Extended specific configuration functions + * @brief Extended specific configuration functions + * +@verbatim + =============================================================================== + ##### Extended specific configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extended FLASH + specific configurations. + +@endverbatim + * @{ + */ + +/** + * @brief Configuration of the LVE pin of the Flash (managed by power controller + * or forced to low in order to use an external SMPS) + * @param ConfigLVE Configuration of the LVE pin, + * This parameter can be one of the following values: + * @arg FLASH_LVE_PIN_CTRL: LVE FLASH pin controlled by power controller + * @arg FLASH_LVE_PIN_FORCED: LVE FLASH pin enforced to low (external SMPS used) + * + * @note Before enforcing the LVE pin to low, the SOC should be in low voltage + * range 2 and the voltage VDD12 should be higher than 1.08V and SMPS is ON. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_ConfigLVEPin(uint32_t ConfigLVE) +{ + HAL_StatusTypeDef status; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check the parameters */ + assert_param(IS_FLASH_LVE_PIN(ConfigLVE)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + /* Check that the voltage scaling is range 2 */ + if (HAL_PWREx_GetVoltageRange() == PWR_REGULATOR_VOLTAGE_SCALE2) + { + /* Configure the LVEN bit */ + MODIFY_REG(FLASH->CFGR, FLASH_CFGR_LVEN, ConfigLVE); + + /* Check that the bit has been correctly configured */ + if (READ_BIT(FLASH->CFGR, FLASH_CFGR_LVEN) != ConfigLVE) + { + status = HAL_ERROR; + } + } + else + { + /* Not allow to force Flash LVE pin if not in voltage range 2 */ + status = HAL_ERROR; + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @} + */ +#endif /* FLASH_CFGR_LVEN */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ +/** + * @brief Mass erase of FLASH memory. + * @param Banks Banks to be erased + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased + * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased + * @retval None + */ +static void FLASH_MassErase(uint32_t Banks) +{ +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if (READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) != 0U) +#endif + { + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + + /* Set the Mass Erase Bit for the bank 1 if requested */ + if((Banks & FLASH_BANK_1) != 0U) + { + SET_BIT(FLASH->CR, FLASH_CR_MER1); + } + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + /* Set the Mass Erase Bit for the bank 2 if requested */ + if((Banks & FLASH_BANK_2) != 0U) + { + SET_BIT(FLASH->CR, FLASH_CR_MER2); + } +#endif + } +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + else + { + SET_BIT(FLASH->CR, (FLASH_CR_MER1 | FLASH_CR_MER2)); + } +#endif + + /* Proceed to erase all sectors */ + SET_BIT(FLASH->CR, FLASH_CR_STRT); +} + +/** + * @brief Erase the specified FLASH memory page. + * @param Page FLASH page to erase + * This parameter must be a value between 0 and (max number of pages in the bank - 1) + * @param Banks Bank(s) where the page will be erased + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: Page in bank 1 to be erased + * @arg FLASH_BANK_2: Page in bank 2 to be erased + * @retval None + */ +void FLASH_PageErase(uint32_t Page, uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_FLASH_PAGE(Page)); + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if(READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) == 0U) + { + CLEAR_BIT(FLASH->CR, FLASH_CR_BKER); + } + else +#endif + { + assert_param(IS_FLASH_BANK_EXCLUSIVE(Banks)); + + if((Banks & FLASH_BANK_1) != 0U) + { + CLEAR_BIT(FLASH->CR, FLASH_CR_BKER); + } + else + { + SET_BIT(FLASH->CR, FLASH_CR_BKER); + } + } +#else + /* Prevent unused argument(s) compilation warning */ + UNUSED(Banks); +#endif + + /* Proceed to erase the page */ + MODIFY_REG(FLASH->CR, FLASH_CR_PNB, ((Page & 0xFFU) << FLASH_CR_PNB_Pos)); + SET_BIT(FLASH->CR, FLASH_CR_PER); + SET_BIT(FLASH->CR, FLASH_CR_STRT); +} + +/** + * @brief Flush the instruction and data caches. + * @retval None + */ +void FLASH_FlushCaches(void) +{ + FLASH_CacheTypeDef cache = pFlash.CacheToReactivate; + + /* Flush instruction cache */ + if((cache == FLASH_CACHE_ICACHE_ENABLED) || + (cache == FLASH_CACHE_ICACHE_DCACHE_ENABLED)) + { + /* Disable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); + /* Reset instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_RESET(); + /* Enable instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); + } + + /* Flush data cache */ + if((cache == FLASH_CACHE_DCACHE_ENABLED) || + (cache == FLASH_CACHE_ICACHE_DCACHE_ENABLED)) + { + /* Reset data cache */ + __HAL_FLASH_DATA_CACHE_RESET(); + /* Enable data cache */ + __HAL_FLASH_DATA_CACHE_ENABLE(); + } + + /* Reset internal variable */ + pFlash.CacheToReactivate = FLASH_CACHE_DISABLED; +} + +/** + * @brief Configure the write protection of the desired pages. + * + * @note When the memory read protection level is selected (RDP level = 1), + * it is not possible to program or erase Flash memory if the CPU debug + * features are connected (JTAG or single wire) or boot code is being + * executed from RAM or System flash, even if WRP is not activated. + * @note To configure the WRP options, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To validate the WRP options, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * + * @param WRPArea specifies the area to be configured. + * This parameter can be one of the following values: + * @arg OB_WRPAREA_BANK1_AREAA: Flash Bank 1 Area A + * @arg OB_WRPAREA_BANK1_AREAB: Flash Bank 1 Area B + * @arg OB_WRPAREA_BANK2_AREAA: Flash Bank 2 Area A (don't apply for STM32L43x/STM32L44x devices) + * @arg OB_WRPAREA_BANK2_AREAB: Flash Bank 2 Area B (don't apply for STM32L43x/STM32L44x devices) + * + * @param WRPStartOffset specifies the start page of the write protected area + * This parameter can be page number between 0 and (max number of pages in the bank - 1) + * + * @param WRDPEndOffset specifies the end page of the write protected area + * This parameter can be page number between WRPStartOffset and (max number of pages in the bank - 1) + * + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OB_WRPAREA(WRPArea)); + assert_param(IS_FLASH_PAGE(WRPStartOffset)); + assert_param(IS_FLASH_PAGE(WRDPEndOffset)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Configure the write protected area */ + if(WRPArea == OB_WRPAREA_BANK1_AREAA) + { + MODIFY_REG(FLASH->WRP1AR, (FLASH_WRP1AR_WRP1A_STRT | FLASH_WRP1AR_WRP1A_END), + (WRPStartOffset | (WRDPEndOffset << 16))); + } + else if(WRPArea == OB_WRPAREA_BANK1_AREAB) + { + MODIFY_REG(FLASH->WRP1BR, (FLASH_WRP1BR_WRP1B_STRT | FLASH_WRP1BR_WRP1B_END), + (WRPStartOffset | (WRDPEndOffset << 16))); + } +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + else if(WRPArea == OB_WRPAREA_BANK2_AREAA) + { + MODIFY_REG(FLASH->WRP2AR, (FLASH_WRP2AR_WRP2A_STRT | FLASH_WRP2AR_WRP2A_END), + (WRPStartOffset | (WRDPEndOffset << 16))); + } + else if(WRPArea == OB_WRPAREA_BANK2_AREAB) + { + MODIFY_REG(FLASH->WRP2BR, (FLASH_WRP2BR_WRP2B_STRT | FLASH_WRP2BR_WRP2B_END), + (WRPStartOffset | (WRDPEndOffset << 16))); + } +#endif + else + { + /* Nothing to do */ + } + + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + } + + return status; +} + +/** + * @brief Set the read protection level. + * + * @note To configure the RDP level, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To validate the RDP level, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * @note !!! Warning : When enabling OB_RDP level 2 it's no more possible + * to go back to level 1 or 0 !!! + * + * @param RDPLevel specifies the read protection level. + * This parameter can be one of the following values: + * @arg OB_RDP_LEVEL_0: No protection + * @arg OB_RDP_LEVEL_1: Read protection of the memory + * @arg OB_RDP_LEVEL_2: Full chip protection + * + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_RDPConfig(uint32_t RDPLevel) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OB_RDP_LEVEL(RDPLevel)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + /* Configure the RDP level in the option bytes register */ + MODIFY_REG(FLASH->OPTR, FLASH_OPTR_RDP, RDPLevel); + + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + } + + return status; +} + +/** + * @brief Program the FLASH User Option Byte. + * + * @note To configure the user option bytes, the option lock bit OPTLOCK must + * be cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To validate the user option bytes, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * + * @param UserType The FLASH User Option Bytes to be modified + * @param UserConfig The FLASH User Option Bytes values: + * BOR_LEV(Bit8-10), nRST_STOP(Bit12), nRST_STDBY(Bit13), IWDG_SW(Bit16), + * IWDG_STOP(Bit17), IWDG_STDBY(Bit18), WWDG_SW(Bit19), BFB2(Bit20), + * DUALBANK(Bit21), nBOOT1(Bit23), SRAM2_PE(Bit24) and SRAM2_RST(Bit25). + * + * @retval HAL status + */ +static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig) +{ + uint32_t optr_reg_val = 0; + uint32_t optr_reg_mask = 0; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OB_USER_TYPE(UserType)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { + if((UserType & OB_USER_BOR_LEV) != 0U) + { + /* BOR level option byte should be modified */ + assert_param(IS_OB_USER_BOR_LEVEL(UserConfig & FLASH_OPTR_BOR_LEV)); + + /* Set value and mask for BOR level option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_BOR_LEV); + optr_reg_mask |= FLASH_OPTR_BOR_LEV; + } + + if((UserType & OB_USER_nRST_STOP) != 0U) + { + /* nRST_STOP option byte should be modified */ + assert_param(IS_OB_USER_STOP(UserConfig & FLASH_OPTR_nRST_STOP)); + + /* Set value and mask for nRST_STOP option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_nRST_STOP); + optr_reg_mask |= FLASH_OPTR_nRST_STOP; + } + + if((UserType & OB_USER_nRST_STDBY) != 0U) + { + /* nRST_STDBY option byte should be modified */ + assert_param(IS_OB_USER_STANDBY(UserConfig & FLASH_OPTR_nRST_STDBY)); + + /* Set value and mask for nRST_STDBY option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_nRST_STDBY); + optr_reg_mask |= FLASH_OPTR_nRST_STDBY; + } + + if((UserType & OB_USER_nRST_SHDW) != 0U) + { + /* nRST_SHDW option byte should be modified */ + assert_param(IS_OB_USER_SHUTDOWN(UserConfig & FLASH_OPTR_nRST_SHDW)); + + /* Set value and mask for nRST_SHDW option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_nRST_SHDW); + optr_reg_mask |= FLASH_OPTR_nRST_SHDW; + } + + if((UserType & OB_USER_IWDG_SW) != 0U) + { + /* IWDG_SW option byte should be modified */ + assert_param(IS_OB_USER_IWDG(UserConfig & FLASH_OPTR_IWDG_SW)); + + /* Set value and mask for IWDG_SW option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_IWDG_SW); + optr_reg_mask |= FLASH_OPTR_IWDG_SW; + } + + if((UserType & OB_USER_IWDG_STOP) != 0U) + { + /* IWDG_STOP option byte should be modified */ + assert_param(IS_OB_USER_IWDG_STOP(UserConfig & FLASH_OPTR_IWDG_STOP)); + + /* Set value and mask for IWDG_STOP option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_IWDG_STOP); + optr_reg_mask |= FLASH_OPTR_IWDG_STOP; + } + + if((UserType & OB_USER_IWDG_STDBY) != 0U) + { + /* IWDG_STDBY option byte should be modified */ + assert_param(IS_OB_USER_IWDG_STDBY(UserConfig & FLASH_OPTR_IWDG_STDBY)); + + /* Set value and mask for IWDG_STDBY option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_IWDG_STDBY); + optr_reg_mask |= FLASH_OPTR_IWDG_STDBY; + } + + if((UserType & OB_USER_WWDG_SW) != 0U) + { + /* WWDG_SW option byte should be modified */ + assert_param(IS_OB_USER_WWDG(UserConfig & FLASH_OPTR_WWDG_SW)); + + /* Set value and mask for WWDG_SW option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_WWDG_SW); + optr_reg_mask |= FLASH_OPTR_WWDG_SW; + } + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if((UserType & OB_USER_BFB2) != 0U) + { + /* BFB2 option byte should be modified */ + assert_param(IS_OB_USER_BFB2(UserConfig & FLASH_OPTR_BFB2)); + + /* Set value and mask for BFB2 option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_BFB2); + optr_reg_mask |= FLASH_OPTR_BFB2; + } + + if((UserType & OB_USER_DUALBANK) != 0U) + { +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + /* DUALBANK option byte should be modified */ + assert_param(IS_OB_USER_DUALBANK(UserConfig & FLASH_OPTR_DB1M)); + + /* Set value and mask for DUALBANK option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_DB1M); + optr_reg_mask |= FLASH_OPTR_DB1M; +#else + /* DUALBANK option byte should be modified */ + assert_param(IS_OB_USER_DUALBANK(UserConfig & FLASH_OPTR_DUALBANK)); + + /* Set value and mask for DUALBANK option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_DUALBANK); + optr_reg_mask |= FLASH_OPTR_DUALBANK; +#endif + } +#endif + + if((UserType & OB_USER_nBOOT1) != 0U) + { + /* nBOOT1 option byte should be modified */ + assert_param(IS_OB_USER_BOOT1(UserConfig & FLASH_OPTR_nBOOT1)); + + /* Set value and mask for nBOOT1 option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_nBOOT1); + optr_reg_mask |= FLASH_OPTR_nBOOT1; + } + + if((UserType & OB_USER_SRAM2_PE) != 0U) + { + /* SRAM2_PE option byte should be modified */ + assert_param(IS_OB_USER_SRAM2_PARITY(UserConfig & FLASH_OPTR_SRAM2_PE)); + + /* Set value and mask for SRAM2_PE option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_SRAM2_PE); + optr_reg_mask |= FLASH_OPTR_SRAM2_PE; + } + + if((UserType & OB_USER_SRAM2_RST) != 0U) + { + /* SRAM2_RST option byte should be modified */ + assert_param(IS_OB_USER_SRAM2_RST(UserConfig & FLASH_OPTR_SRAM2_RST)); + + /* Set value and mask for SRAM2_RST option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_SRAM2_RST); + optr_reg_mask |= FLASH_OPTR_SRAM2_RST; + } + +#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || \ + defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if((UserType & OB_USER_nSWBOOT0) != 0U) + { + /* nSWBOOT0 option byte should be modified */ + assert_param(IS_OB_USER_SWBOOT0(UserConfig & FLASH_OPTR_nSWBOOT0)); + + /* Set value and mask for nSWBOOT0 option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_nSWBOOT0); + optr_reg_mask |= FLASH_OPTR_nSWBOOT0; + } + + if((UserType & OB_USER_nBOOT0) != 0U) + { + /* nBOOT0 option byte should be modified */ + assert_param(IS_OB_USER_BOOT0(UserConfig & FLASH_OPTR_nBOOT0)); + + /* Set value and mask for nBOOT0 option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTR_nBOOT0); + optr_reg_mask |= FLASH_OPTR_nBOOT0; + } +#endif + + /* Configure the option bytes register */ + MODIFY_REG(FLASH->OPTR, optr_reg_mask, optr_reg_val); + + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + } + + return status; +} + +/** + * @brief Configure the Proprietary code readout protection of the desired addresses. + * + * @note To configure the PCROP options, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To validate the PCROP options, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * + * @param PCROPConfig specifies the configuration (Bank to be configured and PCROP_RDP option). + * This parameter must be a combination of FLASH_BANK_1 or FLASH_BANK_2 + * with OB_PCROP_RDP_NOT_ERASE or OB_PCROP_RDP_ERASE + * + * @param PCROPStartAddr specifies the start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the bank + * + * @param PCROPEndAddr specifies the end address of the Proprietary code readout protection + * This parameter can be an address between PCROPStartAddr and end of the bank + * + * @retval HAL Status + */ +static HAL_StatusTypeDef FLASH_OB_PCROPConfig(uint32_t PCROPConfig, uint32_t PCROPStartAddr, uint32_t PCROPEndAddr) +{ + HAL_StatusTypeDef status; + uint32_t reg_value; + uint32_t bank1_addr; +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + uint32_t bank2_addr; +#endif + + /* Check the parameters */ + assert_param(IS_FLASH_BANK_EXCLUSIVE(PCROPConfig & FLASH_BANK_BOTH)); + assert_param(IS_OB_PCROP_RDP(PCROPConfig & FLASH_PCROP1ER_PCROP_RDP)); + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(PCROPStartAddr)); + assert_param(IS_FLASH_MAIN_MEM_ADDRESS(PCROPEndAddr)); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if(status == HAL_OK) + { +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + /* Get the information about the bank swapping */ + if (READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_FB_MODE) == 0U) + { + bank1_addr = FLASH_BASE; + bank2_addr = FLASH_BASE + FLASH_BANK_SIZE; + } + else + { + bank1_addr = FLASH_BASE + FLASH_BANK_SIZE; + bank2_addr = FLASH_BASE; + } +#else + bank1_addr = FLASH_BASE; +#endif + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if (READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) == 0U) + { + /* Configure the Proprietary code readout protection */ + if((PCROPConfig & FLASH_BANK_BOTH) == FLASH_BANK_1) + { + reg_value = ((PCROPStartAddr - FLASH_BASE) >> 4); + MODIFY_REG(FLASH->PCROP1SR, FLASH_PCROP1SR_PCROP1_STRT, reg_value); + + reg_value = ((PCROPEndAddr - FLASH_BASE) >> 4); + MODIFY_REG(FLASH->PCROP1ER, FLASH_PCROP1ER_PCROP1_END, reg_value); + } + else if((PCROPConfig & FLASH_BANK_BOTH) == FLASH_BANK_2) + { + reg_value = ((PCROPStartAddr - FLASH_BASE) >> 4); + MODIFY_REG(FLASH->PCROP2SR, FLASH_PCROP2SR_PCROP2_STRT, reg_value); + + reg_value = ((PCROPEndAddr - FLASH_BASE) >> 4); + MODIFY_REG(FLASH->PCROP2ER, FLASH_PCROP2ER_PCROP2_END, reg_value); + } + else + { + /* Nothing to do */ + } + } + else +#endif + { + /* Configure the Proprietary code readout protection */ + if((PCROPConfig & FLASH_BANK_BOTH) == FLASH_BANK_1) + { + reg_value = ((PCROPStartAddr - bank1_addr) >> 3); + MODIFY_REG(FLASH->PCROP1SR, FLASH_PCROP1SR_PCROP1_STRT, reg_value); + + reg_value = ((PCROPEndAddr - bank1_addr) >> 3); + MODIFY_REG(FLASH->PCROP1ER, FLASH_PCROP1ER_PCROP1_END, reg_value); + } +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + else if((PCROPConfig & FLASH_BANK_BOTH) == FLASH_BANK_2) + { + reg_value = ((PCROPStartAddr - bank2_addr) >> 3); + MODIFY_REG(FLASH->PCROP2SR, FLASH_PCROP2SR_PCROP2_STRT, reg_value); + + reg_value = ((PCROPEndAddr - bank2_addr) >> 3); + MODIFY_REG(FLASH->PCROP2ER, FLASH_PCROP2ER_PCROP2_END, reg_value); + } +#endif + else + { + /* Nothing to do */ + } + } + + MODIFY_REG(FLASH->PCROP1ER, FLASH_PCROP1ER_PCROP_RDP, (PCROPConfig & FLASH_PCROP1ER_PCROP_RDP)); + + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + } + + return status; +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * + * @param[in] WRPArea: specifies the area to be returned. + * This parameter can be one of the following values: + * @arg OB_WRPAREA_BANK1_AREAA: Flash Bank 1 Area A + * @arg OB_WRPAREA_BANK1_AREAB: Flash Bank 1 Area B + * @arg OB_WRPAREA_BANK2_AREAA: Flash Bank 2 Area A (don't apply to STM32L43x/STM32L44x devices) + * @arg OB_WRPAREA_BANK2_AREAB: Flash Bank 2 Area B (don't apply to STM32L43x/STM32L44x devices) + * + * @param[out] WRPStartOffset: specifies the address where to copied the start page + * of the write protected area + * + * @param[out] WRDPEndOffset: specifies the address where to copied the end page of + * the write protected area + * + * @retval None + */ +static void FLASH_OB_GetWRP(uint32_t WRPArea, uint32_t * WRPStartOffset, uint32_t * WRDPEndOffset) +{ + /* Get the configuration of the write protected area */ + if(WRPArea == OB_WRPAREA_BANK1_AREAA) + { + *WRPStartOffset = READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP1AR, FLASH_WRP1AR_WRP1A_END) >> 16); + } + else if(WRPArea == OB_WRPAREA_BANK1_AREAB) + { + *WRPStartOffset = READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_END) >> 16); + } +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + else if(WRPArea == OB_WRPAREA_BANK2_AREAA) + { + *WRPStartOffset = READ_BIT(FLASH->WRP2AR, FLASH_WRP2AR_WRP2A_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP2AR, FLASH_WRP2AR_WRP2A_END) >> 16); + } + else if(WRPArea == OB_WRPAREA_BANK2_AREAB) + { + *WRPStartOffset = READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_STRT); + *WRDPEndOffset = (READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_END) >> 16); + } +#endif + else + { + /* Nothing to do */ + } +} + +/** + * @brief Return the FLASH Read Protection level. + * @retval FLASH ReadOut Protection Status: + * This return value can be one of the following values: + * @arg OB_RDP_LEVEL_0: No protection + * @arg OB_RDP_LEVEL_1: Read protection of the memory + * @arg OB_RDP_LEVEL_2: Full chip protection + */ +static uint32_t FLASH_OB_GetRDP(void) +{ + uint32_t rdp_level = READ_BIT(FLASH->OPTR, FLASH_OPTR_RDP); + + if ((rdp_level != OB_RDP_LEVEL_0) && (rdp_level != OB_RDP_LEVEL_2)) + { + return (OB_RDP_LEVEL_1); + } + else + { + return (READ_BIT(FLASH->OPTR, FLASH_OPTR_RDP)); + } +} + +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values: + * For STM32L47x/STM32L48x devices : + * BOR_LEV(Bit8-10), nRST_STOP(Bit12), nRST_STDBY(Bit13), nRST_SHDW(Bit14), + * IWDG_SW(Bit16), IWDG_STOP(Bit17), IWDG_STDBY(Bit18), WWDG_SW(Bit19), + * BFB2(Bit20), DUALBANK(Bit21), nBOOT1(Bit23), SRAM2_PE(Bit24) and SRAM2_RST(Bit25). + * For STM32L43x/STM32L44x devices : + * BOR_LEV(Bit8-10), nRST_STOP(Bit12), nRST_STDBY(Bit13), nRST_SHDW(Bit14), + * IWDG_SW(Bit16), IWDG_STOP(Bit17), IWDG_STDBY(Bit18), WWDG_SW(Bit19), + * nBOOT1(Bit23), SRAM2_PE(Bit24), SRAM2_RST(Bit25), nSWBOOT0(Bit26) and nBOOT0(Bit27). + */ +static uint32_t FLASH_OB_GetUser(void) +{ + uint32_t user_config = READ_REG(FLASH->OPTR); + CLEAR_BIT(user_config, FLASH_OPTR_RDP); + + return user_config; +} + +/** + * @brief Return the FLASH Write Protection Option Bytes value. + * + * @param PCROPConfig [inout]: specifies the configuration (Bank to be configured and PCROP_RDP option). + * This parameter must be a combination of FLASH_BANK_1 or FLASH_BANK_2 + * with OB_PCROP_RDP_NOT_ERASE or OB_PCROP_RDP_ERASE + * + * @param PCROPStartAddr [out]: specifies the address where to copied the start address + * of the Proprietary code readout protection + * + * @param PCROPEndAddr [out]: specifies the address where to copied the end address of + * the Proprietary code readout protection + * + * @retval None + */ +static void FLASH_OB_GetPCROP(uint32_t * PCROPConfig, uint32_t * PCROPStartAddr, uint32_t * PCROPEndAddr) +{ + uint32_t reg_value; + uint32_t bank1_addr; +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + uint32_t bank2_addr; +#endif + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + /* Get the information about the bank swapping */ + if (READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_FB_MODE) == 0U) + { + bank1_addr = FLASH_BASE; + bank2_addr = FLASH_BASE + FLASH_BANK_SIZE; + } + else + { + bank1_addr = FLASH_BASE + FLASH_BANK_SIZE; + bank2_addr = FLASH_BASE; + } +#else + bank1_addr = FLASH_BASE; +#endif + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + if (READ_BIT(FLASH->OPTR, FLASH_OPTR_DBANK) == 0U) + { + if(((*PCROPConfig) & FLASH_BANK_BOTH) == FLASH_BANK_1) + { + reg_value = (READ_REG(FLASH->PCROP1SR) & FLASH_PCROP1SR_PCROP1_STRT); + *PCROPStartAddr = (reg_value << 4) + FLASH_BASE; + + reg_value = (READ_REG(FLASH->PCROP1ER) & FLASH_PCROP1ER_PCROP1_END); + *PCROPEndAddr = (reg_value << 4) + FLASH_BASE + 0xFU; + } + else if(((*PCROPConfig) & FLASH_BANK_BOTH) == FLASH_BANK_2) + { + reg_value = (READ_REG(FLASH->PCROP2SR) & FLASH_PCROP2SR_PCROP2_STRT); + *PCROPStartAddr = (reg_value << 4) + FLASH_BASE; + + reg_value = (READ_REG(FLASH->PCROP2ER) & FLASH_PCROP2ER_PCROP2_END); + *PCROPEndAddr = (reg_value << 4) + FLASH_BASE + 0xFU;; + } + else + { + /* Nothing to do */ + } + } + else +#endif + { + if(((*PCROPConfig) & FLASH_BANK_BOTH) == FLASH_BANK_1) + { + reg_value = (READ_REG(FLASH->PCROP1SR) & FLASH_PCROP1SR_PCROP1_STRT); + *PCROPStartAddr = (reg_value << 3) + bank1_addr; + + reg_value = (READ_REG(FLASH->PCROP1ER) & FLASH_PCROP1ER_PCROP1_END); + *PCROPEndAddr = (reg_value << 3) + bank1_addr + 0x7U; + } +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ + defined (STM32L496xx) || defined (STM32L4A6xx) || \ + defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + else if(((*PCROPConfig) & FLASH_BANK_BOTH) == FLASH_BANK_2) + { + reg_value = (READ_REG(FLASH->PCROP2SR) & FLASH_PCROP2SR_PCROP2_STRT); + *PCROPStartAddr = (reg_value << 3) + bank2_addr; + + reg_value = (READ_REG(FLASH->PCROP2ER) & FLASH_PCROP2ER_PCROP2_END); + *PCROPEndAddr = (reg_value << 3) + bank2_addr + 0x7U; + } +#endif + else + { + /* Nothing to do */ + } + } + + *PCROPConfig |= (READ_REG(FLASH->PCROP1ER) & FLASH_PCROP1ER_PCROP_RDP); +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c new file mode 100644 index 0000000..82599f9 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_flash_ramfunc.c @@ -0,0 +1,251 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_flash_ramfunc.c + * @author MCD Application Team + * @brief FLASH RAMFUNC driver. + * This file provides a Flash firmware functions which should be + * executed from internal SRAM + * + FLASH HalfPage Programming + * + FLASH Power Down in Run mode + * + * @verbatim + ============================================================================== + ##### Flash RAM functions ##### + ============================================================================== + + *** ARM Compiler *** + -------------------- + [..] RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate + source module. Using the 'Options for File' dialog you can simply change + the 'Code / Const' area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the + Options for Target' dialog. + + *** ICCARM Compiler *** + ----------------------- + [..] RAM functions are defined using a specific toolchain keyword "__ramfunc". + + *** GNU Compiler *** + -------------------- + [..] RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASH_RAMFUNC FLASH_RAMFUNC + * @brief FLASH functions executed from RAM + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions -------------------------------------------------------*/ + +/** @defgroup FLASH_RAMFUNC_Exported_Functions FLASH in RAM function Exported Functions + * @{ + */ + +/** @defgroup FLASH_RAMFUNC_Exported_Functions_Group1 Peripheral features functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### ramfunc functions ##### + =============================================================================== + [..] + This subsection provides a set of functions that should be executed from RAM. + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Power down in Run Mode + * @note This function should be called and executed from SRAM memory + * @retval HAL status + */ +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_EnableRunPowerDown(void) +{ + /* Enable the Power Down in Run mode*/ + __HAL_FLASH_POWER_DOWN_ENABLE(); + + return HAL_OK; + +} + +/** + * @brief Disable the Power down in Run Mode + * @note This function should be called and executed from SRAM memory + * @retval HAL status + */ +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_DisableRunPowerDown(void) +{ + /* Disable the Power Down in Run mode*/ + __HAL_FLASH_POWER_DOWN_DISABLE(); + + return HAL_OK; +} + +#if defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +/** + * @brief Program the FLASH DBANK User Option Byte. + * + * @note To configure the user option bytes, the option lock bit OPTLOCK must + * be cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To modify the DBANK option byte, no PCROP region should be defined. + * To deactivate PCROP, user should perform RDP changing + * + * @param DBankConfig The FLASH DBANK User Option Byte value. + * This parameter can be one of the following values: + * @arg OB_DBANK_128_BITS: Single-bank with 128-bits data + * @arg OB_DBANK_64_BITS: Dual-bank with 64-bits data + * + * @retval HAL status + */ +__RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_OB_DBankConfig(uint32_t DBankConfig) +{ + uint32_t count, reg; + HAL_StatusTypeDef status = HAL_ERROR; + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Check if the PCROP is disabled */ + reg = FLASH->PCROP1SR; + if (reg > FLASH->PCROP1ER) + { + reg = FLASH->PCROP2SR; + if (reg > FLASH->PCROP2ER) + { + /* Disable Flash prefetch */ + __HAL_FLASH_PREFETCH_BUFFER_DISABLE(); + + if (READ_BIT(FLASH->ACR, FLASH_ACR_ICEN) != 0U) + { + /* Disable Flash instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); + + /* Flush Flash instruction cache */ + __HAL_FLASH_INSTRUCTION_CACHE_RESET(); + } + + if (READ_BIT(FLASH->ACR, FLASH_ACR_DCEN) != 0U) + { + /* Disable Flash data cache */ + __HAL_FLASH_DATA_CACHE_DISABLE(); + + /* Flush Flash data cache */ + __HAL_FLASH_DATA_CACHE_RESET(); + } + + /* Disable WRP zone 1 of 1st bank if needed */ + reg = FLASH->WRP1AR; + if (((reg & FLASH_WRP1AR_WRP1A_STRT) >> FLASH_WRP1AR_WRP1A_STRT_Pos) <= + ((reg & FLASH_WRP1AR_WRP1A_END) >> FLASH_WRP1AR_WRP1A_END_Pos)) + { + MODIFY_REG(FLASH->WRP1AR, (FLASH_WRP1AR_WRP1A_STRT | FLASH_WRP1AR_WRP1A_END), FLASH_WRP1AR_WRP1A_STRT); + } + + /* Disable WRP zone 2 of 1st bank if needed */ + reg = FLASH->WRP1BR; + if (((reg & FLASH_WRP1BR_WRP1B_STRT) >> FLASH_WRP1BR_WRP1B_STRT_Pos) <= + ((reg & FLASH_WRP1BR_WRP1B_END) >> FLASH_WRP1BR_WRP1B_END_Pos)) + { + MODIFY_REG(FLASH->WRP1BR, (FLASH_WRP1BR_WRP1B_STRT | FLASH_WRP1BR_WRP1B_END), FLASH_WRP1BR_WRP1B_STRT); + } + + /* Disable WRP zone 1 of 2nd bank if needed */ + reg = FLASH->WRP2AR; + if (((reg & FLASH_WRP2AR_WRP2A_STRT) >> FLASH_WRP2AR_WRP2A_STRT_Pos) <= + ((reg & FLASH_WRP2AR_WRP2A_END) >> FLASH_WRP2AR_WRP2A_END_Pos)) + { + MODIFY_REG(FLASH->WRP2AR, (FLASH_WRP2AR_WRP2A_STRT | FLASH_WRP2AR_WRP2A_END), FLASH_WRP2AR_WRP2A_STRT); + } + + /* Disable WRP zone 2 of 2nd bank if needed */ + reg = FLASH->WRP2BR; + if (((reg & FLASH_WRP2BR_WRP2B_STRT) >> FLASH_WRP2BR_WRP2B_STRT_Pos) <= + ((reg & FLASH_WRP2BR_WRP2B_END) >> FLASH_WRP2BR_WRP2B_END_Pos)) + { + MODIFY_REG(FLASH->WRP2BR, (FLASH_WRP2BR_WRP2B_STRT | FLASH_WRP2BR_WRP2B_END), FLASH_WRP2BR_WRP2B_STRT); + } + + /* Modify the DBANK user option byte */ + MODIFY_REG(FLASH->OPTR, FLASH_OPTR_DBANK, DBankConfig); + + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Wait for last operation to be completed */ + /* 8 is the number of required instruction cycles for the below loop statement (timeout expressed in ms) */ + count = FLASH_TIMEOUT_VALUE * (SystemCoreClock / 8U / 1000U); + do + { + if (count == 0U) + { + break; + } + count--; + } while (__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET); + + /* If the option byte program operation is completed, disable the OPTSTRT Bit */ + CLEAR_BIT(FLASH->CR, FLASH_CR_OPTSTRT); + + /* Set the bit to force the option byte reloading */ + SET_BIT(FLASH->CR, FLASH_CR_OBL_LAUNCH); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} +#endif + +/** + * @} + */ + +/** + * @} + */ +#endif /* HAL_FLASH_MODULE_ENABLED */ + + + +/** + * @} + */ + +/** + * @} + */ + + + + diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c new file mode 100644 index 0000000..5933b2d --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_gpio.c @@ -0,0 +1,551 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually + configured by software in several modes: + (++) Input mode + (++) Analog mode + (++) Output mode + (++) Alternate function mode + (++) External interrupt/event lines + + (+) During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + (+) The microcontroller IO pins are connected to onboard peripherals/modules through a + multiplexer that allows only one peripheral alternate function (AF) connected + to an IO pin at a time. In this way, there can be no conflict between peripherals + sharing the same IO pin. + + (+) All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + (+) The external interrupt/event controller consists of up to 39 edge detectors + (16 lines are connected to GPIO) for generating event/interrupt requests (each + input line can be independently configured to select the type (interrupt or event) + and the corresponding trigger event (rising or falling or both). Each line can + also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure. + (++) In alternate mode is selection, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure. + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PH0 and PH1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of + * range of the shift operator in following API : + * HAL_GPIO_Init + * HAL_GPIO_DeInit + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Defines GPIO Private Defines + * @{ + */ +#define GPIO_NUMBER (16u) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family + * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t temp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if (((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + temp |= (GPIO_Init->Speed << (position * 2u)); + GPIOx->OSPEEDR = temp; + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + temp &= ~(GPIO_OTYPER_OT0 << position) ; + temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); + GPIOx->OTYPER = temp; + } + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) + + /* In case of Analog mode, check if ADC control mode is selected */ + if((GPIO_Init->Mode & GPIO_MODE_ANALOG) == GPIO_MODE_ANALOG) + { + /* Configure the IO Output Type */ + temp = GPIOx->ASCR; + temp &= ~(GPIO_ASCR_ASC0 << position) ; + temp |= (((GPIO_Init->Mode & GPIO_MODE_ANALOG_ADC_CONTROL) >> 3) << position); + GPIOx->ASCR = temp; + } + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + + /* Activate the Pull-up or Pull down resistor for the current IO */ + if ((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) + { + /* Check the Pull parameter */ + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + temp = GPIOx->PUPDR; + temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2U)); + temp |= ((GPIO_Init->Pull) << (position * 2U)); + GPIOx->PUPDR = temp; + } + + /* In case of Alternate function mode selection */ + if ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3u]; + temp &= ~(0xFu << ((position & 0x07u) * 4u)); + temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); + GPIOx->AFR[position >> 3u] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + temp &= ~(GPIO_MODER_MODE0 << (position * 2u)); + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); + GPIOx->MODER = temp; + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((GPIO_Init->Mode & EXTI_MODE) != 0x00u) + { + /* Enable SYSCFG Clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + temp = SYSCFG->EXTICR[position >> 2u]; + temp &= ~(0x0FuL << (4u * (position & 0x03u))); + temp |= (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u))); + SYSCFG->EXTICR[position >> 2u] = temp; + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & TRIGGER_RISING) != 0x00u) + { + temp |= iocurrent; + } + EXTI->RTSR1 = temp; + + temp = EXTI->FTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00u) + { + temp |= iocurrent; + } + EXTI->FTSR1 = temp; + + /* Clear EXTI line configuration */ + temp = EXTI->EMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & EXTI_EVT) != 0x00u) + { + temp |= iocurrent; + } + EXTI->EMR1 = temp; + + temp = EXTI->IMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & EXTI_IT) != 0x00u) + { + temp |= iocurrent; + } + EXTI->IMR1 = temp; + } + } + + position++; + } +} + +/** + * @brief De-initialize the GPIOx peripheral registers to their default reset values. + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + + tmp = SYSCFG->EXTICR[position >> 2u]; + tmp &= (0x0FuL << (4u * (position & 0x03u))); + if (tmp == (GPIO_GET_INDEX(GPIOx) << (4u * (position & 0x03u)))) + { + /* Clear EXTI line configuration */ + EXTI->IMR1 &= ~(iocurrent); + EXTI->EMR1 &= ~(iocurrent); + + /* Clear Rising Falling edge configuration */ + EXTI->FTSR1 &= ~(iocurrent); + EXTI->RTSR1 &= ~(iocurrent); + + tmp = 0x0FuL << (4u * (position & 0x03u)); + SYSCFG->EXTICR[position >> 2u] &= ~tmp; + } + + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO in Analog Mode */ + GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2u)); + + /* Configure the default Alternate Function in current IO */ + GPIOx->AFR[position >> 3u] &= ~(0xFu << ((position & 0x07u) * 4u)) ; + + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + + /* Configure the default value IO Output Type */ + GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position) ; + + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2u)); + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) + /* Deactivate the Control bit of Analog mode for the current IO */ + GPIOx->ASCR &= ~(GPIO_ASCR_ASC0<< position); +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx */ + } + + position++; + } +} + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Read the specified input port pin. + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family + * @param GPIO_Pin specifies the port bit to read. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != 0x00u) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Set or clear the selected data port bit. + * + * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). + * @param PinState specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if(PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + } + else + { + GPIOx->BRR = (uint32_t)GPIO_Pin; + } +} + +/** + * @brief Toggle the specified GPIO pin. + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family + * @param GPIO_Pin specifies the pin to be toggled. + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Output Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** +* @brief Lock GPIO Pins configuration registers. + * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, + * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. + * @note The configuration of the locked GPIO pins can no longer be modified + * until the next reset. + * @param GPIOx where x can be (A..H) to select the GPIO peripheral for STM32L4 family + * @param GPIO_Pin specifies the port bits to be locked. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + tmp |= GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + tmp = GPIOx->LCKR; + + /* Read again in order to confirm lock is active */ + if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00u) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handle EXTI interrupt request. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != 0x00u) + { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c new file mode 100644 index 0000000..f2a4423 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c.c @@ -0,0 +1,7548 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_i2c.c + * @author MCD Application Team + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for + the transmit or receive channel + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx channel + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx channel + + (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, + Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master or memory I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + + *** Interrupt mode or DMA mode IO sequential operation *** + ========================================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through I2C_XFEROPTIONS and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in + no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with + start condition, address and data to transfer without a final stop condition, + an then permit a call the same master sequential interface several times + (like HAL_I2C_Master_Seq_Transmit_IT() then HAL_I2C_Master_Seq_Transmit_IT() + or HAL_I2C_Master_Seq_Transmit_DMA() then HAL_I2C_Master_Seq_Transmit_DMA()) + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and with a final stop condition in both cases + (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition + after several call of the same master sequential interface several times + (link with option I2C_FIRST_AND_NEXT_FRAME). + Usage can, transfer several bytes one by one using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME. + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or + Receive sequence permit to call the opposite interface Receive or Transmit + without stopping the communication and so generate a restart condition. + (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after + each call of the same master sequential + interface. + Usage can, transfer several bytes one by one with a restart with slave address between + each bytes using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_FRAME then I2C_OTHER_FRAME. + Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic + generation of STOP condition. + + (+) Different sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Transmit_IT() or using HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Receive_IT() or using HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (++) Abort a master or memory IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() + HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and users can + add their own code to check the Address Match Code and the transmission direction request by master + (Write/Read). + (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Transmit_IT() or using HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Receive_IT() or using HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master or memory I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode + (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not + (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2C_RegisterCallback() or HAL_I2C_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function HAL_I2C_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : HAL_I2C_RegisterAddrCallback(). + [..] + Use function HAL_I2C_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : HAL_I2C_UnRegisterAddrCallback(). + [..] + By default, after the HAL_I2C_Init() and when the state is HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2C_MasterTxCpltCallback(), HAL_I2C_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2C_Init()/ HAL_I2C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2C_Init()/ HAL_I2C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2C_RegisterCallback() before calling HAL_I2C_DeInit() + or HAL_I2C_Init() function. + [..] + When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup I2C_Private_Define I2C Private Define + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ +#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ + +#define MAX_NBYTE_SIZE 255U +#define SLAVE_ADDR_SHIFT 7U +#define SLAVE_ADDR_MSK 0x06U + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | \ + (uint32_t)HAL_I2C_STATE_BUSY_RX) & \ + (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) +/*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) +/*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy RX, combinaison of State LSB and Mode enum */ + + +/* Private define to centralize the enable/disable of Interrupts */ +#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /*!< Bit field can be combinated with @ref I2C_XFER_TX_IT + and @ref I2C_XFER_RX_IT */ + +#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /*!< Bit definition to manage addition of global Error + and NACK treatment */ +#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /*!< Bit definition to manage only STOP evenement */ +#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /*!< Bit definition to manage only Reload of NBYTE */ + +/* Private define Sequential Transfer Options default/reset value */ +#define I2C_NO_OPTION_FRAME (0xFFFF0000U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup I2C_Private_Macro + * @{ + */ +/* Macro to get remaining data to transfer on DMA side */ +#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) __HAL_DMA_GET_COUNTER(__HANDLE__) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions to handle DMA transfer */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + + +/* Private functions to handle IT transfer */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); + +/* Private functions to handle IT transfer */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions for I2C transfer IRQ handler */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); + +/* Private function to treat different error callback */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); + +/* Private function to flush TXDR register */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); + +/* Private function to handle start, restart or stop a transfer */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request); + +/* Private function to Convert Specific options */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + /* Init the I2C Callback settings */ + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + + if (hi2c->MspInitCallback == NULL) + { + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2C_MspInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Disable Own Address1 before set the Own Address1 configuration */ + hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + /* Configure I2Cx: Own Address1 and ack own address1 mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); + } + else /* I2C_ADDRESSINGMODE_10BIT */ + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); + } + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Addressing Master mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + SET_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + } + else + { + /* Clear the I2C ADD10 bit */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ + hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Disable Own Address2 before set the Own Address2 configuration */ + hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; + + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | \ + (hi2c->Init.OwnAddress2Masks << 8)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + if (hi2c->MspDeInitCallback == NULL) + { + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi2c->MspDeInitCallback(hi2c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User I2C Callback + * To be used instead of the weak predefined callback + * @note The HAL_I2C_RegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = pCallback; + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = pCallback; + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = pCallback; + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = pCallback; + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = pCallback; + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an I2C Callback + * I2C callback is redirected to the weak predefined callback + * @note The HAL_I2C_UnRegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to un-register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register the Slave Address Match I2C Callback + * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Slave Address Match I2C Callback + * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + (++) HAL_I2C_Master_Seq_Transmit_IT() + (++) HAL_I2C_Master_Seq_Receive_IT() + (++) HAL_I2C_Slave_Seq_Transmit_IT() + (++) HAL_I2C_Slave_Seq_Receive_IT() + (++) HAL_I2C_EnableListen_IT() + (++) HAL_I2C_DisableListen_IT() + (++) HAL_I2C_Master_Abort_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + (++) HAL_I2C_Master_Seq_Transmit_DMA() + (++) HAL_I2C_Master_Seq_Receive_DMA() + (++) HAL_I2C_Slave_Seq_Transmit_DMA() + (++) HAL_I2C_Slave_Seq_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_AddrCallback() + (++) HAL_I2C_ListenCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, + I2C_GENERATE_START_WRITE); + } + else + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, + I2C_GENERATE_START_WRITE); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = 1U; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint16_t tmpXferCount; + HAL_StatusTypeDef error; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* If 10bit addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Wait until DIR flag is set Transmitter mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until AF flag is set */ + error = I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart); + + if (error != HAL_OK) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + + tmpXferCount = hi2c->XferCount; + if ((hi2c->ErrorCode == HAL_I2C_ERROR_AF) && (tmpXferCount == 0U)) + { + /* Reset ErrorCode to NONE */ + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + else + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + } + else + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Wait until DIR flag is reset Receiver mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, + I2C_GENERATE_START_WRITE); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, + I2C_GENERATE_START_WRITE); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = 1U; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + uint32_t sizetoxfer = 0U; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, + (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), + xfermode, I2C_GENERATE_START_WRITE); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = 1U; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + if (hi2c->XferCount != 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, + (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + do + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = 1U; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + do + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = 1U; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->XferSize = 0U; + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t I2C_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + do + { + /* Generate Start */ + hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Device is ready */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Increment Trials */ + I2C_Trials++; + } while (I2C_Trials < Trials); + + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + uint32_t sizetoxfer = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \ + (XferOptions == I2C_FIRST_AND_LAST_FRAME))) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to write */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + HAL_StatusTypeDef dmaxferstatus; + uint32_t sizetoxfer = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \ + (XferOptions == I2C_FIRST_AND_LAST_FRAME))) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, + (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to write */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Abort DMA Xfer if any */ + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, + (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Enable the Address Match interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Disable the Address Match interrupt */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master or memory I2C IT or DMA process communication with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + HAL_I2C_ModeTypeDef tmp_mode = hi2c->Mode; + + if ((tmp_mode == HAL_I2C_MODE_MASTER) || (tmp_mode == HAL_I2C_MODE_MEM)) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Set State at HAL_I2C_STATE_ABORT */ + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Get current IT Flags and IT sources value */ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + + /* I2C events treatment -------------------------------------*/ + if (hi2c->XferISR != NULL) + { + hi2c->XferISR(hi2c, itflags, itsources); + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + uint32_t tmperror; + + /* I2C Bus error interrupt occurred ------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) + { + I2C_ITError(hi2c, tmperror); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Returns the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** + * @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval I2C Error Code + */ +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) == RESET) && \ + ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))) + { + /* Write data to TXDR */ + if (hi2c->XferCount != 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + hi2c->XferOptions, I2C_NO_STARTSTOP); + } + else + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + if (hi2c->Memaddress == 0xFFFFFFFFU) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t tmpITFlags = ITFlags; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + if (hi2c->XferCount > 0U) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + + if ((hi2c->XferCount == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all Data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hi2c->XferCount > 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + else + { + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t xfermode; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable TC interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); + + if (hi2c->XferCount != 0U) + { + /* Recover Slave address */ + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + xfermode = hi2c->XferOptions; + } + else + { + xfermode = I2C_AUTOEND_MODE; + } + } + + /* Set the new XferSize in Nbytes register */ + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->XferCount != 0U) + { + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error and NACK interrupt for data transfer */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t treatdmanack = 0U; + HAL_I2C_StateTypeDef tmpstate; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, ITFlags); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + /* So clear Flag NACKF only */ + if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || + (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) + { + /* Split check of hdmarx, for MISRA compliance */ + if (hi2c->hdmarx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) + { + treatdmanack = 1U; + } + } + } + + /* Split check of hdmatx, for MISRA compliance */ + if (hi2c->hdmatx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx) == 0U) + { + treatdmanack = 1U; + } + } + } + + if (treatdmanack == 1U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, ITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ + tmpstate = hi2c->State; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else + { + /* Only Clear NACK Flag, no DMA treatment is pending */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TC flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief I2C Address complete process callback. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint8_t transferdirection; + uint16_t slaveaddrcode; + uint16_t ownadd1code; + uint16_t ownadd2code; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(ITFlags); + + /* In case of Listen state, need to inform upper layer of address match code event */ + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + transferdirection = I2C_GET_DIR(hi2c); + slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); + ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); + ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); + + /* If 10bits addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + if ((slaveaddrcode & SLAVE_ADDR_MSK) == ((ownadd1code >> SLAVE_ADDR_SHIFT) & SLAVE_ADDR_MSK)) + { + slaveaddrcode = ownadd1code; + hi2c->AddrEventCount++; + if (hi2c->AddrEventCount == 2U) + { + /* Reset Address Event counter */ + hi2c->AddrEventCount = 0U; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + slaveaddrcode = ownadd2code; + + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* else 7 bits addressing mode is selected */ + else + { + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* Else clear address flag only */ + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } +} + +/** + * @brief I2C Master sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) +{ + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Slave sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + else + { + /* Do nothing */ + } + + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Master complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmperror; + uint32_t tmpITFlags = ITFlags; + __IO uint32_t tmpreg; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Reset handle parameters */ + hi2c->XferISR = NULL; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set acknowledge error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Fetch Last receive data if any */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) + { + /* Read data from RXDR */ + tmpreg = (uint8_t)hi2c->Instance->RXDR; + UNUSED(tmpreg); + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Slave complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + uint32_t tmpITFlags = ITFlags; + uint32_t tmpoptions = hi2c->XferOptions; + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else if (tmpstate == HAL_I2C_STATE_LISTEN) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_NONE; + } + else + { + /* Do nothing */ + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + if (hi2c->hdmatx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx); + } + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx); + } + } + else + { + /* Do nothing */ + } + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* All data are not transferred, so set error code accordingly */ + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + } + else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ + I2C_ITSlaveSeqCplt(hi2c); + + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* Call the corresponding callback to inform upper layer of End of Transfer */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Listen complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + /* Reset handle parameters */ + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + } + + /* Disable all Interrupts*/ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} + +/** + * @brief I2C interrupts error process. + * @param hi2c I2C handle. + * @param ErrorCode Error code to handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) +{ + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + uint32_t tmppreviousstate; + + /* Reset handle parameters */ + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferCount = 0U; + + /* Set new error code */ + hi2c->ErrorCode |= ErrorCode; + + /* Disable Interrupts */ + if ((tmpstate == HAL_I2C_STATE_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Disable all interrupts, except interrupts related to LISTEN state */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* keep HAL_I2C_STATE_LISTEN if set */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + } + else + { + /* Disable all interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if (hi2c->State != HAL_I2C_STATE_ABORT) + { + /* Set HAL_I2C_STATE_READY */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + } + hi2c->XferISR = NULL; + } + + /* Abort DMA TX transfer if any */ + tmppreviousstate = hi2c->PreviousState; + + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + /* Abort DMA RX transfer if any */ + else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } +} + +/** + * @brief I2C Error callback treatment. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Tx data register flush process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) + { + hi2c->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); + } +} + +/** + * @brief DMA I2C master transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + + +/** + * @brief DMA I2C slave transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + + +/** + * @brief DMA I2C master receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + /* Errata workaround 170323 */ + if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) + { + hi2c->XferSize = 1U; + } + else + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + + +/** + * @brief DMA I2C slave receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); +} + + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Reset AbortCpltCallback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferAbortCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferAbortCallback = NULL; + } + + I2C_TreatErrorCallback(hi2c); +} + + +/** + * @brief This function handles I2C Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Flag Specifies the I2C flag to check. + * @param Status The actual Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) && (status == HAL_OK)) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + status = HAL_ERROR; + } + + /* Check if a STOPF is detected */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) && (status == HAL_OK)) + { + /* Check if an RXNE is pending */ + /* Store Last receive data if any */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) + { + /* Return HAL_OK */ + /* The Reading of data from RXDR will be done in caller function */ + status = HAL_OK; + } + + /* Check a no-acknowledge have been detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode = HAL_I2C_ERROR_AF; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + status = HAL_ERROR; + } + else + { + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + } + + /* Check for the Timeout */ + if ((((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) && (status == HAL_OK)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + status = HAL_ERROR; + } + } + } + return status; +} + +/** + * @brief This function handles errors detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t itflag = hi2c->Instance->ISR; + uint32_t error_code = 0; + uint32_t tickstart = Tickstart; + uint32_t tmp1; + HAL_I2C_ModeTypeDef tmp2; + + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_AF)) + { + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP Flag is set or timeout occurred */ + /* AutoEnd should be initiate after AF */ + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (status == HAL_OK)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + tmp1 = (uint32_t)(hi2c->Instance->CR2 & I2C_CR2_STOP); + tmp2 = hi2c->Mode; + + /* In case of I2C still busy, try to regenerate a STOP manually */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET) && \ + (tmp1 != I2C_CR2_STOP) && \ + (tmp2 != HAL_I2C_MODE_SLAVE)) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Update Tick with new reference */ + tickstart = HAL_GetTick(); + } + + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > I2C_TIMEOUT_STOPF) + { + error_code |= HAL_I2C_ERROR_TIMEOUT; + + status = HAL_ERROR; + + break; + } + } + } + } + } + + /* In case STOP Flag is detected, clear it */ + if (status == HAL_OK) + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + error_code |= HAL_I2C_ERROR_AF; + + status = HAL_ERROR; + } + + /* Refresh Content of Status register */ + itflag = hi2c->Instance->ISR; + + /* Then verify if an additional errors occurs */ + /* Check if a Bus error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_BERR)) + { + error_code |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + + status = HAL_ERROR; + } + + /* Check if an Over-Run/Under-Run error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_OVR)) + { + error_code |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + + status = HAL_ERROR; + } + + /* Check if an Arbitration Loss error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_ARLO)) + { + error_code |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + + status = HAL_ERROR; + } + + if (status != HAL_OK) + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode |= error_code; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } + + return status; +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hi2c I2C handle. + * @param DevAddress Specifies the slave address to be programmed. + * @param Size Specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_RELOAD_MODE Enable Reload mode . + * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. + * @param Request New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. + * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_TRANSFER_MODE(Mode)); + assert_param(IS_TRANSFER_REQUEST(Request)); + + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)Mode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(hi2c->Instance->CR2, \ + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | \ + I2C_CR2_START | I2C_CR2_STOP)), tmp); +} + +/** + * @brief Manage the enabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((hi2c->XferISR != I2C_Master_ISR_DMA) && \ + (hi2c->XferISR != I2C_Slave_ISR_DMA) && \ + (hi2c->XferISR != I2C_Mem_ISR_DMA)) + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + } + + else + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of I2C interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_I2C_ENABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Manage the disabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Disable TC and TXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_TXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Disable TC and RXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_RXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Disable ADDR, NACK and STOP interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_I2C_DISABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) +{ + /* if user set XferOptions to I2C_OTHER_FRAME */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to I2C_FIRST_FRAME */ + if (hi2c->XferOptions == I2C_OTHER_FRAME) + { + hi2c->XferOptions = I2C_FIRST_FRAME; + } + /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ + else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) + { + hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; + } + else + { + /* Nothing to do */ + } +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c new file mode 100644 index 0000000..f111b69 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_i2c_ex.c @@ -0,0 +1,368 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_i2c_ex.c + * @author MCD Application Team + * @brief I2C Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2C Extended peripheral: + * + Filter Mode Functions + * + WakeUp Mode Functions + * + FastModePlus Functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### I2C peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the I2C interface for STM32L4xx + devices contains the following additional features + + (+) Possibility to disable or enable Analog Noise Filter + (+) Use of a configured Digital Noise Filter + (+) Disable or enable wakeup from Stop mode(s) + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure Noise Filter and Wake Up Feature + (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() + (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() + (#) Configure the enable or disable of I2C Wake Up Mode using the functions : + (++) HAL_I2CEx_EnableWakeUp() + (++) HAL_I2CEx_DisableWakeUp() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_I2CEx_EnableFastModePlus() + (++) HAL_I2CEx_DisableFastModePlus() + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup I2CEx I2CEx + * @brief I2C Extended HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @defgroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @brief Filter Mode Functions + * +@verbatim + =============================================================================== + ##### Filter Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Noise Filters + +@endverbatim + * @{ + */ + +/** + * @brief Configure I2C Analog noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter New state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hi2c->Instance->CR1 |= AnalogFilter; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure I2C Digital noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get the old register value */ + tmpreg = hi2c->Instance->CR1; + + /* Reset I2Cx DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << 8U; + + /* Store the new register value */ + hi2c->Instance->CR1 = tmpreg; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @brief WakeUp Mode Functions + * +@verbatim + =============================================================================== + ##### WakeUp Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Wake Up Feature + +@endverbatim + * @{ + */ + +/** + * @brief Enable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 |= I2C_CR1_WUPEN; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @brief Fast Mode Plus Functions + * +@verbatim + =============================================================================== + ##### Fast Mode Plus Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be enabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @note For all I2C4 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C4 parameter. + * @retval None + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Enable fast mode plus driving capability for selected pin */ + SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be disabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @note For all I2C4 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C4 parameter. + * @retval None + */ +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Disable fast mode plus driving capability for selected pin */ + CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus); +} +/** + * @} + */ +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c new file mode 100644 index 0000000..8638eec --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr.c @@ -0,0 +1,658 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2019 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup PWR_Private_Defines PWR Private Defines + * @{ + */ + +/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask + * @{ + */ +#define PVD_MODE_IT ((uint32_t)0x00010000) /*!< Mask for interruption yielded by PVD threshold crossing */ +#define PVD_MODE_EVT ((uint32_t)0x00020000) /*!< Mask for event yielded by PVD threshold crossing */ +#define PVD_RISING_EDGE ((uint32_t)0x00000001) /*!< Mask for rising edge set as PVD trigger */ +#define PVD_FALLING_EDGE ((uint32_t)0x00000002) /*!< Mask for falling edge set as PVD trigger */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + +@endverbatim + * @{ + */ + +/** + * @brief Deinitialize the HAL PWR peripheral registers to their default reset values. + * @retval None + */ +void HAL_PWR_DeInit(void) +{ + __HAL_RCC_PWR_FORCE_RESET(); + __HAL_RCC_PWR_RELEASE_RESET(); +} + +/** + * @brief Enable access to the backup domain + * (RTC registers, RTC backup data registers). + * @note After reset, the backup domain is protected against + * possible unwanted write accesses. + * @note RTCSEL that sets the RTC clock source selection is in the RTC back-up domain. + * In order to set or modify the RTC clock, the backup domain access must be + * disabled. + * @note LSEON bit that switches on and off the LSE crystal belongs as well to the + * back-up domain. + * @retval None + */ +void HAL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Disable access to the backup domain + * (RTC registers, RTC backup data registers). + * @retval None + */ +void HAL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); +} + + + + +/** + * @} + */ + + + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions + * @brief Low Power modes configuration functions + * +@verbatim + + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + + [..] + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PLS[2:0] bits in PWR_CR2 register). + + (+) PVDO flag is available to indicate if VDD/VDDA is higher or lower + than the PVD threshold. This event is internally connected to the EXTI + line16 and can generate an interrupt if enabled. This is done through + __HAL_PVD_EXTI_ENABLE_IT() macro. + (+) The PVD is stopped in Standby mode. + + + *** WakeUp pin configuration *** + ================================ + [..] + (+) WakeUp pins are used to wakeup the system from Standby mode or Shutdown mode. + The polarity of these pins can be set to configure event detection on high + level (rising edge) or low level (falling edge). + + + + *** Low Power modes configuration *** + ===================================== + [..] + The devices feature 8 low-power modes: + (+) Low-power Run mode: core and peripherals are running, main regulator off, low power regulator on. + (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running, main and low power regulators on. + (+) Low-power Sleep mode: Cortex-M4 core stopped, peripherals kept running, main regulator off, low power regulator on. + (+) Stop 0 mode: all clocks are stopped except LSI and LSE, main and low power regulators on. + (+) Stop 1 mode: all clocks are stopped except LSI and LSE, main regulator off, low power regulator on. + (+) Stop 2 mode: all clocks are stopped except LSI and LSE, main regulator off, low power regulator on, reduced set of waking up IPs compared to Stop 1 mode. + (+) Standby mode with SRAM2: all clocks are stopped except LSI and LSE, SRAM2 content preserved, main regulator off, low power regulator on. + (+) Standby mode without SRAM2: all clocks are stopped except LSI and LSE, main and low power regulators off. + (+) Shutdown mode: all clocks are stopped except LSE, main and low power regulators off. + + + *** Low-power run mode *** + ========================== + [..] + (+) Entry: (from main run mode) + (++) set LPR bit with HAL_PWREx_EnableLowPowerRunMode() API after having decreased the system clock below 2 MHz. + + (+) Exit: + (++) clear LPR bit then wait for REGLP bit to be reset with HAL_PWREx_DisableLowPowerRunMode() API. Only + then can the system clock frequency be increased above 2 MHz. + + + *** Sleep mode / Low-power sleep mode *** + ========================================= + [..] + (+) Entry: + The Sleep mode / Low-power Sleep mode is entered through HAL_PWR_EnterSLEEPMode() API + in specifying whether or not the regulator is forced to low-power mode and if exit is interrupt or event-triggered. + (++) PWR_MAINREGULATOR_ON: Sleep mode (regulator in main mode). + (++) PWR_LOWPOWERREGULATOR_ON: Low-power sleep (regulator in low power mode). + In the latter case, the system clock frequency must have been decreased below 2 MHz beforehand. + (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction + (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction + + (+) WFI Exit: + (++) Any peripheral interrupt acknowledged by the nested vectored interrupt + controller (NVIC) or any wake-up event. + + (+) WFE Exit: + (++) Any wake-up event such as an EXTI line configured in event mode. + + [..] When exiting the Low-power sleep mode by issuing an interrupt or a wakeup event, + the MCU is in Low-power Run mode. + + *** Stop 0, Stop 1 and Stop 2 modes *** + =============================== + [..] + (+) Entry: + The Stop 0, Stop 1 or Stop 2 modes are entered through the following API's: + (++) HAL_PWREx_EnterSTOP0Mode() for mode 0 or HAL_PWREx_EnterSTOP1Mode() for mode 1 or for porting reasons HAL_PWR_EnterSTOPMode(). + (++) HAL_PWREx_EnterSTOP2Mode() for mode 2. + (+) Regulator setting (applicable to HAL_PWR_EnterSTOPMode() only): + (++) PWR_MAINREGULATOR_ON + (++) PWR_LOWPOWERREGULATOR_ON + (+) Exit (interrupt or event-triggered, specified when entering STOP mode): + (++) PWR_STOPENTRY_WFI: enter Stop mode with WFI instruction + (++) PWR_STOPENTRY_WFE: enter Stop mode with WFE instruction + + (+) WFI Exit: + (++) Any EXTI Line (Internal or External) configured in Interrupt mode. + (++) Some specific communication peripherals (USART, LPUART, I2C) interrupts + when programmed in wakeup mode. + (+) WFE Exit: + (++) Any EXTI Line (Internal or External) configured in Event mode. + + [..] + When exiting Stop 0 and Stop 1 modes, the MCU is either in Run mode or in Low-power Run mode + depending on the LPR bit setting. + When exiting Stop 2 mode, the MCU is in Run mode. + + *** Standby mode *** + ==================== + [..] + The Standby mode offers two options: + (+) option a) all clocks off except LSI and LSE, RRS bit set (keeps voltage regulator in low power mode). + SRAM and registers contents are lost except for the SRAM2 content, the RTC registers, RTC backup registers + and Standby circuitry. + (+) option b) all clocks off except LSI and LSE, RRS bit cleared (voltage regulator then disabled). + SRAM and register contents are lost except for the RTC registers, RTC backup registers + and Standby circuitry. + + (++) Entry: + (+++) The Standby mode is entered through HAL_PWR_EnterSTANDBYMode() API. + SRAM1 and register contents are lost except for registers in the Backup domain and + Standby circuitry. SRAM2 content can be preserved if the bit RRS is set in PWR_CR3 register. + To enable this feature, the user can resort to HAL_PWREx_EnableSRAM2ContentRetention() API + to set RRS bit. + + (++) Exit: + (+++) WKUP pin rising edge, RTC alarm or wakeup, tamper event, time-stamp event, + external reset in NRST pin, IWDG reset. + + [..] After waking up from Standby mode, program execution restarts in the same way as after a Reset. + + + *** Shutdown mode *** + ====================== + [..] + In Shutdown mode, + voltage regulator is disabled, all clocks are off except LSE, RRS bit is cleared. + SRAM and registers contents are lost except for backup domain registers. + + (+) Entry: + The Shutdown mode is entered through HAL_PWREx_EnterSHUTDOWNMode() API. + + (+) Exit: + (++) WKUP pin rising edge, RTC alarm or wakeup, tamper event, time-stamp event, + external reset in NRST pin. + + [..] After waking up from Shutdown mode, program execution restarts in the same way as after a Reset. + + + *** Auto-wakeup (AWU) from low-power mode *** + ============================================= + [..] + The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC + Wakeup event, a tamper event or a time-stamp event, without depending on + an external interrupt (Auto-wakeup mode). + + (+) RTC auto-wakeup (AWU) from the Stop, Standby and Shutdown modes + + + (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to + configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. + + (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it + is necessary to configure the RTC to detect the tamper or time stamp event using the + HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions. + + (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to + configure the RTC to generate the RTC WakeUp event using the HAL_RTCEx_SetWakeUpTimer_IT() function. + +@endverbatim + * @{ + */ + + + +/** + * @brief Configure the voltage threshold detected by the Power Voltage Detector (PVD). + * @param sConfigPVD: pointer to a PWR_PVDTypeDef structure that contains the PVD + * configuration information. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage thresholds corresponding to each + * detection level. + * @retval None + */ +HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); + assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); + + /* Set PLS bits according to PVDLevel value */ + MODIFY_REG(PWR->CR2, PWR_CR2_PLS, sConfigPVD->PVDLevel); + + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVD_EXTI_DISABLE_IT(); + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) + { + __HAL_PWR_PVD_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) + { + __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); + } + + return HAL_OK; +} + + +/** + * @brief Enable the Power Voltage Detector (PVD). + * @retval None + */ +void HAL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_PVDE); +} + +/** + * @brief Disable the Power Voltage Detector (PVD). + * @retval None + */ +void HAL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE); +} + + + + +/** + * @brief Enable the WakeUp PINx functionality. + * @param WakeUpPinPolarity: Specifies which Wake-Up pin to enable. + * This parameter can be one of the following legacy values which set the default polarity + * i.e. detection on high level (rising edge): + * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5 + * + * or one of the following value where the user can explicitly specify the enabled pin and + * the chosen polarity: + * @arg @ref PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW + * @arg @ref PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW + * @arg @ref PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW + * @arg @ref PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW + * @arg @ref PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW + * @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent. + * @retval None + */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity) +{ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity)); + + /* Specifies the Wake-Up pin polarity for the event detection + (rising or falling edge) */ + MODIFY_REG(PWR->CR4, (PWR_CR3_EWUP & WakeUpPinPolarity), (WakeUpPinPolarity >> PWR_WUP_POLARITY_SHIFT)); + + /* Enable wake-up pin */ + SET_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinPolarity)); + + +} + +/** + * @brief Disable the WakeUp PINx functionality. + * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable. + * This parameter can be one of the following values: + * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5 + * @retval None + */ +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) +{ + assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); + + CLEAR_BIT(PWR->CR3, (PWR_CR3_EWUP & WakeUpPinx)); +} + + +/** + * @brief Enter Sleep or Low-power Sleep mode. + * @note In Sleep/Low-power Sleep mode, all I/O pins keep the same state as in Run mode. + * @param Regulator: Specifies the regulator state in Sleep/Low-power Sleep mode. + * This parameter can be one of the following values: + * @arg @ref PWR_MAINREGULATOR_ON Sleep mode (regulator in main mode) + * @arg @ref PWR_LOWPOWERREGULATOR_ON Low-power Sleep mode (regulator in low-power mode) + * @note Low-power Sleep mode is entered from Low-power Run mode. Therefore, if not yet + * in Low-power Run mode before calling HAL_PWR_EnterSLEEPMode() with Regulator set + * to PWR_LOWPOWERREGULATOR_ON, the user can optionally configure the + * Flash in power-down monde in setting the SLEEP_PD bit in FLASH_ACR register. + * Additionally, the clock frequency must be reduced below 2 MHz. + * Setting SLEEP_PD in FLASH_ACR then appropriately reducing the clock frequency must + * be done before calling HAL_PWR_EnterSLEEPMode() API. + * @note When exiting Low-power Sleep mode, the MCU is in Low-power Run mode. To move in + * Run mode, the user must resort to HAL_PWREx_DisableLowPowerRunMode() API. + * @param SLEEPEntry: Specifies if Sleep mode is entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg @ref PWR_SLEEPENTRY_WFI enter Sleep or Low-power Sleep mode with WFI instruction + * @arg @ref PWR_SLEEPENTRY_WFE enter Sleep or Low-power Sleep mode with WFE instruction + * @note When WFI entry is used, tick interrupt have to be disabled if not desired as + * the interrupt wake up source. + * @retval None + */ +void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); + + /* Set Regulator parameter */ + if (Regulator == PWR_MAINREGULATOR_ON) + { + /* If in low-power run mode at this point, exit it */ + if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF)) + { + if (HAL_PWREx_DisableLowPowerRunMode() != HAL_OK) + { + return ; + } + } + /* Regulator now in main mode. */ + } + else + { + /* If in run mode, first move to low-power run mode. + The system clock frequency must be below 2 MHz at this point. */ + if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF) == RESET) + { + HAL_PWREx_EnableLowPowerRunMode(); + } + } + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select SLEEP mode entry -------------------------------------------------*/ + if(SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + +} + + +/** + * @brief Enter Stop mode + * @note This API is named HAL_PWR_EnterSTOPMode to ensure compatibility with legacy code running + * on devices where only "Stop mode" is mentioned with main or low power regulator ON. + * @note In Stop mode, all I/O pins keep the same state as in Run mode. + * @note All clocks in the VCORE domain are stopped; the PLL, the MSI, + * the HSI and the HSE oscillators are disabled. Some peripherals with the wakeup capability + * (I2Cx, USARTx and LPUART) can switch on the HSI to receive a frame, and switch off the HSI + * after receiving the frame if it is not a wakeup frame. In this case, the HSI clock is propagated + * only to the peripheral requesting it. + * SRAM1, SRAM2 and register contents are preserved. + * The BOR is available. + * The voltage regulator can be configured either in normal (Stop 0) or low-power mode (Stop 1). + * @note When exiting Stop 0 or Stop 1 mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register + * is set; the MSI oscillator is selected if STOPWUCK is cleared. + * @note When the voltage regulator operates in low power mode (Stop 1), an additional + * startup delay is incurred when waking up. + * By keeping the internal regulator ON during Stop mode (Stop 0), the consumption + * is higher although the startup time is reduced. + * @param Regulator: Specifies the regulator state in Stop mode. + * This parameter can be one of the following values: + * @arg @ref PWR_MAINREGULATOR_ON Stop 0 mode (main regulator ON) + * @arg @ref PWR_LOWPOWERREGULATOR_ON Stop 1 mode (low power regulator ON) + * @param STOPEntry: Specifies Stop 0 or Stop 1 mode is entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg @ref PWR_STOPENTRY_WFI Enter Stop 0 or Stop 1 mode with WFI instruction. + * @arg @ref PWR_STOPENTRY_WFE Enter Stop 0 or Stop 1 mode with WFE instruction. + * @retval None + */ +void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(Regulator)); + + if(Regulator == PWR_LOWPOWERREGULATOR_ON) + { + HAL_PWREx_EnterSTOP1Mode(STOPEntry); + } + else + { + HAL_PWREx_EnterSTOP0Mode(STOPEntry); + } +} + +/** + * @brief Enter Standby mode. + * @note In Standby mode, the PLL, the HSI, the MSI and the HSE oscillators are switched + * off. The voltage regulator is disabled, except when SRAM2 content is preserved + * in which case the regulator is in low-power mode. + * SRAM1 and register contents are lost except for registers in the Backup domain and + * Standby circuitry. SRAM2 content can be preserved if the bit RRS is set in PWR_CR3 register. + * To enable this feature, the user can resort to HAL_PWREx_EnableSRAM2ContentRetention() API + * to set RRS bit. + * The BOR is available. + * @note The I/Os can be configured either with a pull-up or pull-down or can be kept in analog state. + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() respectively enable Pull Up and + * Pull Down state, HAL_PWREx_DisableGPIOPullUp() and HAL_PWREx_DisableGPIOPullDown() disable the + * same. + * These states are effective in Standby mode only if APC bit is set through + * HAL_PWREx_EnablePullUpPullDownConfig() API. + * @retval None + */ +void HAL_PWR_EnterSTANDBYMode(void) +{ + /* Set Stand-by mode */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_STANDBY); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + +/* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif + /* Request Wait For Interrupt */ + __WFI(); +} + + + +/** + * @brief Indicate Sleep-On-Exit when returning from Handler mode to Thread mode. + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * Setting this bit is useful when the processor is expected to run only on + * interruptions handling. + * @retval None + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + +/** + * @brief Disable Sleep-On-Exit feature when returning from Handler mode to Thread mode. + * @note Clear SLEEPONEXIT bit of SCR register. When this bit is set, the processor + * re-enters SLEEP mode when an interruption handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); +} + + + +/** + * @brief Enable CORTEX M4 SEVONPEND bit. + * @note Set SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + +/** + * @brief Disable CORTEX M4 SEVONPEND bit. + * @note Clear SEVONPEND bit of SCR register. When this bit is set, this causes + * WFE to wake up when an interrupt moves from inactive to pended. + * @retval None + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); +} + + + + + +/** + * @brief PWR PVD interrupt callback + * @retval None + */ +__weak void HAL_PWR_PVDCallback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVDCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c new file mode 100644 index 0000000..0b6eb2f --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_pwr_ex.c @@ -0,0 +1,1474 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_pwr_ex.c + * @author MCD Application Team + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Extended Initialization and de-initialization functions + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWR Extended HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +#if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) +#define PWR_PORTH_AVAILABLE_PINS ((uint32_t)0x0000000B) /* PH0/PH1/PH3 */ +#elif defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) +#define PWR_PORTH_AVAILABLE_PINS ((uint32_t)0x0000000B) /* PH0/PH1/PH3 */ +#elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) +#define PWR_PORTH_AVAILABLE_PINS ((uint32_t)0x00000003) /* PH0/PH1 */ +#elif defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define PWR_PORTH_AVAILABLE_PINS ((uint32_t)0x0000FFFF) /* PH0..PH15 */ +#endif + +#if defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define PWR_PORTI_AVAILABLE_PINS ((uint32_t)0x00000FFF) /* PI0..PI11 */ +#endif + +/** @defgroup PWR_Extended_Private_Defines PWR Extended Private Defines + * @{ + */ + +/** @defgroup PWREx_PVM_Mode_Mask PWR PVM Mode Mask + * @{ + */ +#define PVM_MODE_IT ((uint32_t)0x00010000) /*!< Mask for interruption yielded by PVM threshold crossing */ +#define PVM_MODE_EVT ((uint32_t)0x00020000) /*!< Mask for event yielded by PVM threshold crossing */ +#define PVM_RISING_EDGE ((uint32_t)0x00000001) /*!< Mask for rising edge set as PVM trigger */ +#define PVM_FALLING_EDGE ((uint32_t)0x00000002) /*!< Mask for falling edge set as PVM trigger */ +/** + * @} + */ + +/** @defgroup PWREx_TimeOut_Value PWR Extended Flag Setting Time Out Value + * @{ + */ +#define PWR_FLAG_SETTING_DELAY_US 50UL /*!< Time out value for REGLPF and VOSF flags setting */ +/** + * @} + */ + + + +/** + * @} + */ + + + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/** @defgroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Initialization and de-initialization functions ##### + =============================================================================== + [..] + +@endverbatim + * @{ + */ + + +/** + * @brief Return Voltage Scaling Range. + * @retval VOS bit field (PWR_REGULATOR_VOLTAGE_SCALE1 or PWR_REGULATOR_VOLTAGE_SCALE2 + * or PWR_REGULATOR_VOLTAGE_SCALE1_BOOST when applicable) + */ +uint32_t HAL_PWREx_GetVoltageRange(void) +{ +#if defined(PWR_CR5_R1MODE) + if (READ_BIT(PWR->CR1, PWR_CR1_VOS) == PWR_REGULATOR_VOLTAGE_SCALE2) + { + return PWR_REGULATOR_VOLTAGE_SCALE2; + } + else if (READ_BIT(PWR->CR5, PWR_CR5_R1MODE) == PWR_CR5_R1MODE) + { + /* PWR_CR5_R1MODE bit set means that Range 1 Boost is disabled */ + return PWR_REGULATOR_VOLTAGE_SCALE1; + } + else + { + return PWR_REGULATOR_VOLTAGE_SCALE1_BOOST; + } +#else + return (PWR->CR1 & PWR_CR1_VOS); +#endif +} + + + +/** + * @brief Configure the main internal regulator output voltage. + * @param VoltageScaling specifies the regulator output voltage to achieve + * a tradeoff between performance and power consumption. + * This parameter can be one of the following values: + @if STM32L4S9xx + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1_BOOST when available, Regulator voltage output range 1 boost mode, + * typical output voltage at 1.2 V, + * system frequency up to 120 MHz. + @endif + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1 Regulator voltage output range 1 mode, + * typical output voltage at 1.2 V, + * system frequency up to 80 MHz. + * @arg @ref PWR_REGULATOR_VOLTAGE_SCALE2 Regulator voltage output range 2 mode, + * typical output voltage at 1.0 V, + * system frequency up to 26 MHz. + * @note When moving from Range 1 to Range 2, the system frequency must be decreased to + * a value below 26 MHz before calling HAL_PWREx_ControlVoltageScaling() API. + * When moving from Range 2 to Range 1, the system frequency can be increased to + * a value up to 80 MHz after calling HAL_PWREx_ControlVoltageScaling() API. For + * some devices, the system frequency can be increased up to 120 MHz. + * @note When moving from Range 2 to Range 1, the API waits for VOSF flag to be + * cleared before returning the status. If the flag is not cleared within + * 50 microseconds, HAL_TIMEOUT status is reported. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling) +{ + uint32_t wait_loop_index; + + assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling)); + +#if defined(PWR_CR5_R1MODE) + if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1_BOOST) + { + /* If current range is range 2 */ + if (READ_BIT(PWR->CR1, PWR_CR1_VOS) == PWR_REGULATOR_VOLTAGE_SCALE2) + { + /* Make sure Range 1 Boost is enabled */ + CLEAR_BIT(PWR->CR5, PWR_CR5_R1MODE); + + /* Set Range 1 */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Wait until VOSF is cleared */ + wait_loop_index = ((PWR_FLAG_SETTING_DELAY_US * SystemCoreClock) / 1000000U) + 1; + while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) && (wait_loop_index != 0U)) + { + wait_loop_index--; + } + if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) + { + return HAL_TIMEOUT; + } + } + /* If current range is range 1 normal or boost mode */ + else + { + /* Enable Range 1 Boost (no issue if bit already reset) */ + CLEAR_BIT(PWR->CR5, PWR_CR5_R1MODE); + } + } + else if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1) + { + /* If current range is range 2 */ + if (READ_BIT(PWR->CR1, PWR_CR1_VOS) == PWR_REGULATOR_VOLTAGE_SCALE2) + { + /* Make sure Range 1 Boost is disabled */ + SET_BIT(PWR->CR5, PWR_CR5_R1MODE); + + /* Set Range 1 */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Wait until VOSF is cleared */ + wait_loop_index = ((PWR_FLAG_SETTING_DELAY_US * SystemCoreClock) / 1000000U) + 1; + while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) && (wait_loop_index != 0U)) + { + wait_loop_index--; + } + if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) + { + return HAL_TIMEOUT; + } + } + /* If current range is range 1 normal or boost mode */ + else + { + /* Disable Range 1 Boost (no issue if bit already set) */ + SET_BIT(PWR->CR5, PWR_CR5_R1MODE); + } + } + else + { + /* Set Range 2 */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE2); + /* No need to wait for VOSF to be cleared for this transition */ + /* PWR_CR5_R1MODE bit setting has no effect in Range 2 */ + } + +#else + + /* If Set Range 1 */ + if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1) + { + if (READ_BIT(PWR->CR1, PWR_CR1_VOS) != PWR_REGULATOR_VOLTAGE_SCALE1) + { + /* Set Range 1 */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Wait until VOSF is cleared */ + wait_loop_index = ((PWR_FLAG_SETTING_DELAY_US * SystemCoreClock) / 1000000U) + 1U; + while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) && (wait_loop_index != 0U)) + { + wait_loop_index--; + } + if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF)) + { + return HAL_TIMEOUT; + } + } + } + else + { + if (READ_BIT(PWR->CR1, PWR_CR1_VOS) != PWR_REGULATOR_VOLTAGE_SCALE2) + { + /* Set Range 2 */ + MODIFY_REG(PWR->CR1, PWR_CR1_VOS, PWR_REGULATOR_VOLTAGE_SCALE2); + /* No need to wait for VOSF to be cleared for this transition */ + } + } +#endif + + return HAL_OK; +} + + +/** + * @brief Enable battery charging. + * When VDD is present, charge the external battery on VBAT through an internal resistor. + * @param ResistorSelection specifies the resistor impedance. + * This parameter can be one of the following values: + * @arg @ref PWR_BATTERY_CHARGING_RESISTOR_5 5 kOhms resistor + * @arg @ref PWR_BATTERY_CHARGING_RESISTOR_1_5 1.5 kOhms resistor + * @retval None + */ +void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection) +{ + assert_param(IS_PWR_BATTERY_RESISTOR_SELECT(ResistorSelection)); + + /* Specify resistor selection */ + MODIFY_REG(PWR->CR4, PWR_CR4_VBRS, ResistorSelection); + + /* Enable battery charging */ + SET_BIT(PWR->CR4, PWR_CR4_VBE); +} + + +/** + * @brief Disable battery charging. + * @retval None + */ +void HAL_PWREx_DisableBatteryCharging(void) +{ + CLEAR_BIT(PWR->CR4, PWR_CR4_VBE); +} + + +#if defined(PWR_CR2_USV) +/** + * @brief Enable VDDUSB supply. + * @note Remove VDDUSB electrical and logical isolation, once VDDUSB supply is present. + * @retval None + */ +void HAL_PWREx_EnableVddUSB(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_USV); +} + + +/** + * @brief Disable VDDUSB supply. + * @retval None + */ +void HAL_PWREx_DisableVddUSB(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_USV); +} +#endif /* PWR_CR2_USV */ + +#if defined(PWR_CR2_IOSV) +/** + * @brief Enable VDDIO2 supply. + * @note Remove VDDIO2 electrical and logical isolation, once VDDIO2 supply is present. + * @retval None + */ +void HAL_PWREx_EnableVddIO2(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_IOSV); +} + + +/** + * @brief Disable VDDIO2 supply. + * @retval None + */ +void HAL_PWREx_DisableVddIO2(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_IOSV); +} +#endif /* PWR_CR2_IOSV */ + + +/** + * @brief Enable Internal Wake-up Line. + * @retval None + */ +void HAL_PWREx_EnableInternalWakeUpLine(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_EIWF); +} + + +/** + * @brief Disable Internal Wake-up Line. + * @retval None + */ +void HAL_PWREx_DisableInternalWakeUpLine(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_EIWF); +} + + + +/** + * @brief Enable GPIO pull-up state in Standby and Shutdown modes. + * @note Set the relevant PUy bits of PWR_PUCRx register to configure the I/O in + * pull-up state in Standby and Shutdown modes. + * @note This state is effective in Standby and Shutdown modes only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is lost when exiting the Shutdown mode due to the + * power-on reset, maintained when exiting the Standby mode. + * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding + * PDy bit of PWR_PDCRx register is cleared unless it is reserved. + * @note Even if a PUy bit to set is reserved, the other PUy bits entered as input + * parameter at the same time are set. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_H + * (or PWR_GPIO_I depending on the devices) to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for the port where less + * I/O pins are available) or the logical OR of several of them to set + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PUCRA, (GPIONumber & (~(PWR_GPIO_BIT_14)))); + CLEAR_BIT(PWR->PDCRA, (GPIONumber & (~(PWR_GPIO_BIT_13|PWR_GPIO_BIT_15)))); + break; + case PWR_GPIO_B: + SET_BIT(PWR->PUCRB, GPIONumber); + CLEAR_BIT(PWR->PDCRB, (GPIONumber & (~(PWR_GPIO_BIT_4)))); + break; + case PWR_GPIO_C: + SET_BIT(PWR->PUCRC, GPIONumber); + CLEAR_BIT(PWR->PDCRC, GPIONumber); + break; +#if defined(GPIOD) + case PWR_GPIO_D: + SET_BIT(PWR->PUCRD, GPIONumber); + CLEAR_BIT(PWR->PDCRD, GPIONumber); + break; +#endif +#if defined(GPIOE) + case PWR_GPIO_E: + SET_BIT(PWR->PUCRE, GPIONumber); + CLEAR_BIT(PWR->PDCRE, GPIONumber); + break; +#endif +#if defined(GPIOF) + case PWR_GPIO_F: + SET_BIT(PWR->PUCRF, GPIONumber); + CLEAR_BIT(PWR->PDCRF, GPIONumber); + break; +#endif +#if defined(GPIOG) + case PWR_GPIO_G: + SET_BIT(PWR->PUCRG, GPIONumber); + CLEAR_BIT(PWR->PDCRG, GPIONumber); + break; +#endif + case PWR_GPIO_H: + SET_BIT(PWR->PUCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); +#if defined (STM32L496xx) || defined (STM32L4A6xx) + CLEAR_BIT(PWR->PDCRH, ((GPIONumber & PWR_PORTH_AVAILABLE_PINS) & (~(PWR_GPIO_BIT_3)))); +#else + CLEAR_BIT(PWR->PDCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); +#endif + break; +#if defined(GPIOI) + case PWR_GPIO_I: + SET_BIT(PWR->PUCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); + CLEAR_BIT(PWR->PDCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); + break; +#endif + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Disable GPIO pull-up state in Standby mode and Shutdown modes. + * @note Reset the relevant PUy bits of PWR_PUCRx register used to configure the I/O + * in pull-up state in Standby and Shutdown modes. + * @note Even if a PUy bit to reset is reserved, the other PUy bits entered as input + * parameter at the same time are reset. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A, ..., PWR_GPIO_H + * (or PWR_GPIO_I depending on the devices) to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for the port where less + * I/O pins are available) or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PUCRA, (GPIONumber & (~(PWR_GPIO_BIT_14)))); + break; + case PWR_GPIO_B: + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + case PWR_GPIO_C: + CLEAR_BIT(PWR->PUCRC, GPIONumber); + break; +#if defined(GPIOD) + case PWR_GPIO_D: + CLEAR_BIT(PWR->PUCRD, GPIONumber); + break; +#endif +#if defined(GPIOE) + case PWR_GPIO_E: + CLEAR_BIT(PWR->PUCRE, GPIONumber); + break; +#endif +#if defined(GPIOF) + case PWR_GPIO_F: + CLEAR_BIT(PWR->PUCRF, GPIONumber); + break; +#endif +#if defined(GPIOG) + case PWR_GPIO_G: + CLEAR_BIT(PWR->PUCRG, GPIONumber); + break; +#endif + case PWR_GPIO_H: + CLEAR_BIT(PWR->PUCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); + break; +#if defined(GPIOI) + case PWR_GPIO_I: + CLEAR_BIT(PWR->PUCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); + break; +#endif + default: + status = HAL_ERROR; + break; + } + + return status; +} + + + +/** + * @brief Enable GPIO pull-down state in Standby and Shutdown modes. + * @note Set the relevant PDy bits of PWR_PDCRx register to configure the I/O in + * pull-down state in Standby and Shutdown modes. + * @note This state is effective in Standby and Shutdown modes only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is lost when exiting the Shutdown mode due to the + * power-on reset, maintained when exiting the Standby mode. + * @note To avoid any conflict at Standby and Shutdown modes exits, the corresponding + * PUy bit of PWR_PUCRx register is cleared unless it is reserved. + * @note Even if a PDy bit to set is reserved, the other PDy bits entered as input + * parameter at the same time are set. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_H + * (or PWR_GPIO_I depending on the devices) to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for the port where less + * I/O pins are available) or the logical OR of several of them to set + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PDCRA, (GPIONumber & (~(PWR_GPIO_BIT_13|PWR_GPIO_BIT_15)))); + CLEAR_BIT(PWR->PUCRA, (GPIONumber & (~(PWR_GPIO_BIT_14)))); + break; + case PWR_GPIO_B: + SET_BIT(PWR->PDCRB, (GPIONumber & (~(PWR_GPIO_BIT_4)))); + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + case PWR_GPIO_C: + SET_BIT(PWR->PDCRC, GPIONumber); + CLEAR_BIT(PWR->PUCRC, GPIONumber); + break; +#if defined(GPIOD) + case PWR_GPIO_D: + SET_BIT(PWR->PDCRD, GPIONumber); + CLEAR_BIT(PWR->PUCRD, GPIONumber); + break; +#endif +#if defined(GPIOE) + case PWR_GPIO_E: + SET_BIT(PWR->PDCRE, GPIONumber); + CLEAR_BIT(PWR->PUCRE, GPIONumber); + break; +#endif +#if defined(GPIOF) + case PWR_GPIO_F: + SET_BIT(PWR->PDCRF, GPIONumber); + CLEAR_BIT(PWR->PUCRF, GPIONumber); + break; +#endif +#if defined(GPIOG) + case PWR_GPIO_G: + SET_BIT(PWR->PDCRG, GPIONumber); + CLEAR_BIT(PWR->PUCRG, GPIONumber); + break; +#endif + case PWR_GPIO_H: +#if defined (STM32L496xx) || defined (STM32L4A6xx) + SET_BIT(PWR->PDCRH, ((GPIONumber & PWR_PORTH_AVAILABLE_PINS) & (~(PWR_GPIO_BIT_3)))); +#else + SET_BIT(PWR->PDCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); +#endif + CLEAR_BIT(PWR->PUCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); + break; +#if defined(GPIOI) + case PWR_GPIO_I: + SET_BIT(PWR->PDCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); + CLEAR_BIT(PWR->PUCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); + break; +#endif + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Disable GPIO pull-down state in Standby and Shutdown modes. + * @note Reset the relevant PDy bits of PWR_PDCRx register used to configure the I/O + * in pull-down state in Standby and Shutdown modes. + * @note Even if a PDy bit to reset is reserved, the other PDy bits entered as input + * parameter at the same time are reset. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A..PWR_GPIO_H + * (or PWR_GPIO_I depending on the devices) to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 (except for the port where less + * I/O pins are available) or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PDCRA, (GPIONumber & (~(PWR_GPIO_BIT_13|PWR_GPIO_BIT_15)))); + break; + case PWR_GPIO_B: + CLEAR_BIT(PWR->PDCRB, (GPIONumber & (~(PWR_GPIO_BIT_4)))); + break; + case PWR_GPIO_C: + CLEAR_BIT(PWR->PDCRC, GPIONumber); + break; +#if defined(GPIOD) + case PWR_GPIO_D: + CLEAR_BIT(PWR->PDCRD, GPIONumber); + break; +#endif +#if defined(GPIOE) + case PWR_GPIO_E: + CLEAR_BIT(PWR->PDCRE, GPIONumber); + break; +#endif +#if defined(GPIOF) + case PWR_GPIO_F: + CLEAR_BIT(PWR->PDCRF, GPIONumber); + break; +#endif +#if defined(GPIOG) + case PWR_GPIO_G: + CLEAR_BIT(PWR->PDCRG, GPIONumber); + break; +#endif + case PWR_GPIO_H: +#if defined (STM32L496xx) || defined (STM32L4A6xx) + CLEAR_BIT(PWR->PDCRH, ((GPIONumber & PWR_PORTH_AVAILABLE_PINS) & (~(PWR_GPIO_BIT_3)))); +#else + CLEAR_BIT(PWR->PDCRH, (GPIONumber & PWR_PORTH_AVAILABLE_PINS)); +#endif + break; +#if defined(GPIOI) + case PWR_GPIO_I: + CLEAR_BIT(PWR->PDCRI, (GPIONumber & PWR_PORTI_AVAILABLE_PINS)); + break; +#endif + default: + status = HAL_ERROR; + break; + } + + return status; +} + + + +/** + * @brief Enable pull-up and pull-down configuration. + * @note When APC bit is set, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are applied in Standby and Shutdown modes. + * @note Pull-up set by PUy bit of PWR_PUCRx register is not activated if the corresponding + * PDy bit of PWR_PDCRx register is also set (pull-down configuration priority is higher). + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() API's ensure there + * is no conflict when setting PUy or PDy bit. + * @retval None + */ +void HAL_PWREx_EnablePullUpPullDownConfig(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_APC); +} + + +/** + * @brief Disable pull-up and pull-down configuration. + * @note When APC bit is cleared, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are not applied in Standby and Shutdown modes. + * @retval None + */ +void HAL_PWREx_DisablePullUpPullDownConfig(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_APC); +} + + + +/** + * @brief Enable Full SRAM2 content retention in Standby mode. + * @retval None + */ +void HAL_PWREx_EnableSRAM2ContentRetention(void) +{ + (void) HAL_PWREx_SetSRAM2ContentRetention(PWR_FULL_SRAM2_RETENTION); +} + +/** + * @brief Disable SRAM2 content retention in Standby mode. + * @retval None + */ +void HAL_PWREx_DisableSRAM2ContentRetention(void) +{ + (void) HAL_PWREx_SetSRAM2ContentRetention(PWR_NO_SRAM2_RETENTION); +} + +/** + * @brief Enable SRAM2 content retention in Standby mode. + * @param SRAM2Size: specifies the SRAM2 size kept in Standby mode + * This parameter can be one of the following values: + * @arg @ref PWR_NO_SRAM2_RETENTION SRAM2 is powered off in Standby mode (SRAM2 content is lost) + * @arg @ref PWR_FULL_SRAM2_RETENTION Full SRAM2 is powered by the low-power regulator in Standby mode + * @arg @ref PWR_4KBYTES_SRAM2_RETENTION Only 4 Kbytes of SRAM2 is powered by the low-power regulator in Standby mode + * @note PWR_4KBYTES_SRAM2_RETENTION parameter is not available on all devices + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_SetSRAM2ContentRetention(uint32_t SRAM2Size) +{ + assert_param(IS_PWR_SRAM2_RETENTION(SRAM2Size)); + + if (SRAM2Size == PWR_NO_SRAM2_RETENTION) + { + CLEAR_BIT(PWR->CR3, PWR_CR3_RRS); + } + else if (SRAM2Size == PWR_FULL_SRAM2_RETENTION) + { + MODIFY_REG(PWR->CR3, PWR_CR3_RRS, PWR_FULL_SRAM2_RETENTION); + } +#if defined(PWR_CR3_RRS_1) + else if (SRAM2Size == PWR_4KBYTES_SRAM2_RETENTION) + { + MODIFY_REG(PWR->CR3, PWR_CR3_RRS, PWR_4KBYTES_SRAM2_RETENTION); + } +#endif /* PWR_CR3_RRS_1 */ + else { + return HAL_ERROR; + } + + return HAL_OK; +} + + +#if defined(PWR_CR3_ENULP) +/** + * @brief Enable Ultra Low Power BORL, BORH and PVD for STOP2 and Standby modes. + * @note All the other modes are not affected by this bit. + * @retval None + */ +void HAL_PWREx_EnableBORPVD_ULP(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_ENULP); +} + + +/** + * @brief Disable Ultra Low Power BORL, BORH and PVD for STOP2 and Standby modes. + * @note All the other modes are not affected by this bit + * @retval None + */ +void HAL_PWREx_DisableBORPVD_ULP(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_ENULP); +} +#endif /* PWR_CR3_ENULP */ + + +#if defined(PWR_CR4_EXT_SMPS_ON) +/** + * @brief Enable the CFLDO working @ 0.95V. + * @note When external SMPS is used & CFLDO operating in Range 2, the regulated voltage of the + * internal CFLDO can be reduced to 0.95V. + * @retval None + */ +void HAL_PWREx_EnableExtSMPS_0V95(void) +{ + SET_BIT(PWR->CR4, PWR_CR4_EXT_SMPS_ON); +} + +/** + * @brief Disable the CFLDO working @ 0.95V + * @note Before SMPS is switched off, the regulated voltage of the + * internal CFLDO shall be set to 1.00V. + * 1.00V. is also default operating Range 2 voltage. + * @retval None + */ +void HAL_PWREx_DisableExtSMPS_0V95(void) +{ + CLEAR_BIT(PWR->CR4, PWR_CR4_EXT_SMPS_ON); +} +#endif /* PWR_CR4_EXT_SMPS_ON */ + + +#if defined(PWR_CR1_RRSTP) +/** + * @brief Enable SRAM3 content retention in Stop 2 mode. + * @note When RRSTP bit is set, SRAM3 is powered by the low-power regulator in + * Stop 2 mode and its content is kept. + * @retval None + */ +void HAL_PWREx_EnableSRAM3ContentRetention(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_RRSTP); +} + + +/** + * @brief Disable SRAM3 content retention in Stop 2 mode. + * @note When RRSTP bit is reset, SRAM3 is powered off in Stop 2 mode + * and its content is lost. + * @retval None + */ +void HAL_PWREx_DisableSRAM3ContentRetention(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_RRSTP); +} +#endif /* PWR_CR1_RRSTP */ + +#if defined(PWR_CR3_DSIPDEN) +/** + * @brief Enable pull-down activation on DSI pins. + * @retval None + */ +void HAL_PWREx_EnableDSIPinsPDActivation(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_DSIPDEN); +} + + +/** + * @brief Disable pull-down activation on DSI pins. + * @retval None + */ +void HAL_PWREx_DisableDSIPinsPDActivation(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_DSIPDEN); +} +#endif /* PWR_CR3_DSIPDEN */ + +#if defined(PWR_CR2_PVME1) +/** + * @brief Enable the Power Voltage Monitoring 1: VDDUSB versus 1.2V. + * @retval None + */ +void HAL_PWREx_EnablePVM1(void) +{ + SET_BIT(PWR->CR2, PWR_PVM_1); +} + +/** + * @brief Disable the Power Voltage Monitoring 1: VDDUSB versus 1.2V. + * @retval None + */ +void HAL_PWREx_DisablePVM1(void) +{ + CLEAR_BIT(PWR->CR2, PWR_PVM_1); +} +#endif /* PWR_CR2_PVME1 */ + + +#if defined(PWR_CR2_PVME2) +/** + * @brief Enable the Power Voltage Monitoring 2: VDDIO2 versus 0.9V. + * @retval None + */ +void HAL_PWREx_EnablePVM2(void) +{ + SET_BIT(PWR->CR2, PWR_PVM_2); +} + +/** + * @brief Disable the Power Voltage Monitoring 2: VDDIO2 versus 0.9V. + * @retval None + */ +void HAL_PWREx_DisablePVM2(void) +{ + CLEAR_BIT(PWR->CR2, PWR_PVM_2); +} +#endif /* PWR_CR2_PVME2 */ + + +/** + * @brief Enable the Power Voltage Monitoring 3: VDDA versus 1.62V. + * @retval None + */ +void HAL_PWREx_EnablePVM3(void) +{ + SET_BIT(PWR->CR2, PWR_PVM_3); +} + +/** + * @brief Disable the Power Voltage Monitoring 3: VDDA versus 1.62V. + * @retval None + */ +void HAL_PWREx_DisablePVM3(void) +{ + CLEAR_BIT(PWR->CR2, PWR_PVM_3); +} + + +/** + * @brief Enable the Power Voltage Monitoring 4: VDDA versus 2.2V. + * @retval None + */ +void HAL_PWREx_EnablePVM4(void) +{ + SET_BIT(PWR->CR2, PWR_PVM_4); +} + +/** + * @brief Disable the Power Voltage Monitoring 4: VDDA versus 2.2V. + * @retval None + */ +void HAL_PWREx_DisablePVM4(void) +{ + CLEAR_BIT(PWR->CR2, PWR_PVM_4); +} + + + + +/** + * @brief Configure the Peripheral Voltage Monitoring (PVM). + * @param sConfigPVM: pointer to a PWR_PVMTypeDef structure that contains the + * PVM configuration information. + * @note The API configures a single PVM according to the information contained + * in the input structure. To configure several PVMs, the API must be singly + * called for each PVM used. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage thresholds corresponding to each + * detection level and to each monitored supply. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_PWR_PVM_TYPE(sConfigPVM->PVMType)); + assert_param(IS_PWR_PVM_MODE(sConfigPVM->Mode)); + + + /* Configure EXTI 35 to 38 interrupts if so required: + scan through PVMType to detect which PVMx is set and + configure the corresponding EXTI line accordingly. */ + switch (sConfigPVM->PVMType) + { +#if defined(PWR_CR2_PVME1) + case PWR_PVM_1: + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVM1_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVM1_EXTI_DISABLE_IT(); + __HAL_PWR_PVM1_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVM1_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) + { + __HAL_PWR_PVM1_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) + { + __HAL_PWR_PVM1_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) + { + __HAL_PWR_PVM1_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) + { + __HAL_PWR_PVM1_EXTI_ENABLE_FALLING_EDGE(); + } + break; +#endif /* PWR_CR2_PVME1 */ + +#if defined(PWR_CR2_PVME2) + case PWR_PVM_2: + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVM2_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVM2_EXTI_DISABLE_IT(); + __HAL_PWR_PVM2_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVM2_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) + { + __HAL_PWR_PVM2_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) + { + __HAL_PWR_PVM2_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) + { + __HAL_PWR_PVM2_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) + { + __HAL_PWR_PVM2_EXTI_ENABLE_FALLING_EDGE(); + } + break; +#endif /* PWR_CR2_PVME2 */ + + case PWR_PVM_3: + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVM3_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVM3_EXTI_DISABLE_IT(); + __HAL_PWR_PVM3_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVM3_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) + { + __HAL_PWR_PVM3_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) + { + __HAL_PWR_PVM3_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) + { + __HAL_PWR_PVM3_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) + { + __HAL_PWR_PVM3_EXTI_ENABLE_FALLING_EDGE(); + } + break; + + case PWR_PVM_4: + /* Clear any previous config. Keep it clear if no event or IT mode is selected */ + __HAL_PWR_PVM4_EXTI_DISABLE_EVENT(); + __HAL_PWR_PVM4_EXTI_DISABLE_IT(); + __HAL_PWR_PVM4_EXTI_DISABLE_FALLING_EDGE(); + __HAL_PWR_PVM4_EXTI_DISABLE_RISING_EDGE(); + + /* Configure interrupt mode */ + if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT) + { + __HAL_PWR_PVM4_EXTI_ENABLE_IT(); + } + + /* Configure event mode */ + if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT) + { + __HAL_PWR_PVM4_EXTI_ENABLE_EVENT(); + } + + /* Configure the edge */ + if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE) + { + __HAL_PWR_PVM4_EXTI_ENABLE_RISING_EDGE(); + } + + if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE) + { + __HAL_PWR_PVM4_EXTI_ENABLE_FALLING_EDGE(); + } + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + + +/** + * @brief Enter Low-power Run mode + * @note In Low-power Run mode, all I/O pins keep the same state as in Run mode. + * @note When Regulator is set to PWR_LOWPOWERREGULATOR_ON, the user can optionally configure the + * Flash in power-down monde in setting the RUN_PD bit in FLASH_ACR register. + * Additionally, the clock frequency must be reduced below 2 MHz. + * Setting RUN_PD in FLASH_ACR then appropriately reducing the clock frequency must + * be done before calling HAL_PWREx_EnableLowPowerRunMode() API. + * @retval None + */ +void HAL_PWREx_EnableLowPowerRunMode(void) +{ + /* Set Regulator parameter */ + SET_BIT(PWR->CR1, PWR_CR1_LPR); +} + + +/** + * @brief Exit Low-power Run mode. + * @note Before HAL_PWREx_DisableLowPowerRunMode() completion, the function checks that + * REGLPF has been properly reset (otherwise, HAL_PWREx_DisableLowPowerRunMode + * returns HAL_TIMEOUT status). The system clock frequency can then be + * increased above 2 MHz. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void) +{ + uint32_t wait_loop_index; + + /* Clear LPR bit */ + CLEAR_BIT(PWR->CR1, PWR_CR1_LPR); + + /* Wait until REGLPF is reset */ + wait_loop_index = ((PWR_FLAG_SETTING_DELAY_US * SystemCoreClock) / 1000000U) + 1U; + while ((HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF)) && (wait_loop_index != 0U)) + { + wait_loop_index--; + } + if (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF)) + { + return HAL_TIMEOUT; + } + + return HAL_OK; +} + + +/** + * @brief Enter Stop 0 mode. + * @note In Stop 0 mode, main and low voltage regulators are ON. + * @note In Stop 0 mode, all I/O pins keep the same state as in Run mode. + * @note All clocks in the VCORE domain are stopped; the PLL, the MSI, + * the HSI and the HSE oscillators are disabled. Some peripherals with the wakeup capability + * (I2Cx, USARTx and LPUART) can switch on the HSI to receive a frame, and switch off the HSI + * after receiving the frame if it is not a wakeup frame. In this case, the HSI clock is propagated + * only to the peripheral requesting it. + * SRAM1, SRAM2 and register contents are preserved. + * The BOR is available. + * @note When exiting Stop 0 mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register + * is set; the MSI oscillator is selected if STOPWUCK is cleared. + * @note By keeping the internal regulator ON during Stop 0 mode, the consumption + * is higher although the startup time is reduced. + * @param STOPEntry specifies if Stop mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg @ref PWR_STOPENTRY_WFI Enter Stop mode with WFI instruction + * @arg @ref PWR_STOPENTRY_WFE Enter Stop mode with WFE instruction + * @retval None + */ +void HAL_PWREx_EnterSTOP0Mode(uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + /* Stop 0 mode with Main Regulator */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_STOP0); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + + +/** + * @brief Enter Stop 1 mode. + * @note In Stop 1 mode, only low power voltage regulator is ON. + * @note In Stop 1 mode, all I/O pins keep the same state as in Run mode. + * @note All clocks in the VCORE domain are stopped; the PLL, the MSI, + * the HSI and the HSE oscillators are disabled. Some peripherals with the wakeup capability + * (I2Cx, USARTx and LPUART) can switch on the HSI to receive a frame, and switch off the HSI + * after receiving the frame if it is not a wakeup frame. In this case, the HSI clock is propagated + * only to the peripheral requesting it. + * SRAM1, SRAM2 and register contents are preserved. + * The BOR is available. + * @note When exiting Stop 1 mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register + * is set; the MSI oscillator is selected if STOPWUCK is cleared. + * @note Due to low power mode, an additional startup delay is incurred when waking up from Stop 1 mode. + * @param STOPEntry specifies if Stop mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg @ref PWR_STOPENTRY_WFI Enter Stop mode with WFI instruction + * @arg @ref PWR_STOPENTRY_WFE Enter Stop mode with WFE instruction + * @retval None + */ +void HAL_PWREx_EnterSTOP1Mode(uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + /* Stop 1 mode with Low-Power Regulator */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_STOP1); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + + +/** + * @brief Enter Stop 2 mode. + * @note In Stop 2 mode, only low power voltage regulator is ON. + * @note In Stop 2 mode, all I/O pins keep the same state as in Run mode. + * @note All clocks in the VCORE domain are stopped, the PLL, the MSI, + * the HSI and the HSE oscillators are disabled. Some peripherals with wakeup capability + * (LCD, LPTIM1, I2C3 and LPUART) can switch on the HSI to receive a frame, and switch off the HSI after + * receiving the frame if it is not a wakeup frame. In this case the HSI clock is propagated only + * to the peripheral requesting it. + * SRAM1, SRAM2 and register contents are preserved. + * SRAM3 content is preserved depending on RRSTP bit setting (not available on all devices). + * The BOR is available. + * The voltage regulator is set in low-power mode but LPR bit must be cleared to enter stop 2 mode. + * Otherwise, Stop 1 mode is entered. + * @note When exiting Stop 2 mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock if STOPWUCK bit in RCC_CFGR register + * is set; the MSI oscillator is selected if STOPWUCK is cleared. + * @param STOPEntry specifies if Stop mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg @ref PWR_STOPENTRY_WFI Enter Stop mode with WFI instruction + * @arg @ref PWR_STOPENTRY_WFE Enter Stop mode with WFE instruction + * @retval None + */ +void HAL_PWREx_EnterSTOP2Mode(uint8_t STOPEntry) +{ + /* Check the parameter */ + assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); + + /* Set Stop mode 2 */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_STOP2); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + + + + + +/** + * @brief Enter Shutdown mode. + * @note In Shutdown mode, the PLL, the HSI, the MSI, the LSI and the HSE oscillators are switched + * off. The voltage regulator is disabled and Vcore domain is powered off. + * SRAM1, SRAM2 and registers contents are lost except for registers in the Backup domain. + * The BOR is not available. + * @note The I/Os can be configured either with a pull-up or pull-down or can be kept in analog state. + * @retval None + */ +void HAL_PWREx_EnterSHUTDOWNMode(void) +{ + + /* Set Shutdown mode */ + MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, PWR_CR1_LPMS_SHUTDOWN); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + +/* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM) + __force_stores(); +#endif + /* Request Wait For Interrupt */ + __WFI(); +} + + + + +/** + * @brief This function handles the PWR PVD/PVMx interrupt request. + * @note This API should be called under the PVD_PVM_IRQHandler(). + * @retval None + */ +void HAL_PWREx_PVD_PVM_IRQHandler(void) +{ + /* Check PWR exti flag */ + if(__HAL_PWR_PVD_EXTI_GET_FLAG() != 0x0U) + { + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback(); + + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); + } + /* Next, successively check PVMx exti flags */ +#if defined(PWR_CR2_PVME1) + if(__HAL_PWR_PVM1_EXTI_GET_FLAG() != 0x0U) + { + /* PWR PVM1 interrupt user callback */ + HAL_PWREx_PVM1Callback(); + + /* Clear PVM1 exti pending bit */ + __HAL_PWR_PVM1_EXTI_CLEAR_FLAG(); + } +#endif /* PWR_CR2_PVME1 */ +#if defined(PWR_CR2_PVME2) + if(__HAL_PWR_PVM2_EXTI_GET_FLAG() != 0x0U) + { + /* PWR PVM2 interrupt user callback */ + HAL_PWREx_PVM2Callback(); + + /* Clear PVM2 exti pending bit */ + __HAL_PWR_PVM2_EXTI_CLEAR_FLAG(); + } +#endif /* PWR_CR2_PVME2 */ + if(__HAL_PWR_PVM3_EXTI_GET_FLAG() != 0x0U) + { + /* PWR PVM3 interrupt user callback */ + HAL_PWREx_PVM3Callback(); + + /* Clear PVM3 exti pending bit */ + __HAL_PWR_PVM3_EXTI_CLEAR_FLAG(); + } + if(__HAL_PWR_PVM4_EXTI_GET_FLAG() != 0x0U) + { + /* PWR PVM4 interrupt user callback */ + HAL_PWREx_PVM4Callback(); + + /* Clear PVM4 exti pending bit */ + __HAL_PWR_PVM4_EXTI_CLEAR_FLAG(); + } +} + + +#if defined(PWR_CR2_PVME1) +/** + * @brief PWR PVM1 interrupt callback + * @retval None + */ +__weak void HAL_PWREx_PVM1Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + HAL_PWREx_PVM1Callback() API can be implemented in the user file + */ +} +#endif /* PWR_CR2_PVME1 */ + +#if defined(PWR_CR2_PVME2) +/** + * @brief PWR PVM2 interrupt callback + * @retval None + */ +__weak void HAL_PWREx_PVM2Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + HAL_PWREx_PVM2Callback() API can be implemented in the user file + */ +} +#endif /* PWR_CR2_PVME2 */ + +/** + * @brief PWR PVM3 interrupt callback + * @retval None + */ +__weak void HAL_PWREx_PVM3Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + HAL_PWREx_PVM3Callback() API can be implemented in the user file + */ +} + +/** + * @brief PWR PVM4 interrupt callback + * @retval None + */ +__weak void HAL_PWREx_PVM4Callback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + HAL_PWREx_PVM4Callback() API can be implemented in the user file + */ +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c new file mode 100644 index 0000000..a4fe06f --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc.c @@ -0,0 +1,1942 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from Multiple Speed Internal oscillator + (4 MHz) with Flash 0 wait state. Flash prefetch buffer, D-Cache + and I-Cache are disabled, and all peripherals are off except internal + SRAM, Flash and JTAG. + + (+) There is no prescaler on High speed (AHBs) and Low speed (APBs) busses: + all peripherals mapped on these busses are running at MSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in analog mode, except the JTAG pins which + are assigned to be used for debug purpose. + + [..] + Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB busses prescalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock source(s) for peripherals which clocks are not + derived from the System clock (SAIx, RTC, ADC, USB OTG FS/SDMMC1/RNG) + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define MSI_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#if defined(RCC_CSR_LSIPREDIV) +#define LSI_TIMEOUT_VALUE 17U /* 17 ms (16 ms starting time + 1) */ +#else +#define LSI_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#endif /* RCC_CSR_LSIPREDIV */ +#define HSI48_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define PLL_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define CLOCKSWITCH_TIMEOUT_VALUE 5000U /* 5 s */ +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ +#define __MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO1_GPIO_PORT GPIOA +#define MCO1_PIN GPIO_PIN_8 + +#define RCC_PLL_OSCSOURCE_CONFIG(__HAL_RCC_PLLSOURCE__) \ + (MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__HAL_RCC_PLLSOURCE__))) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCC_Private_Functions RCC Private Functions + * @{ + */ +static HAL_StatusTypeDef RCC_SetFlashLatencyFromMSIRange(uint32_t msirange); +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +static uint32_t RCC_GetSysClockFreqFromPLLSource(void); +#endif +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal and external oscillators + (HSE, HSI, LSE, MSI, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1 + and APB2). + + [..] Internal/external clock and PLL configuration + (+) HSI (high-speed internal): 16 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + + (+) MSI (Multiple Speed Internal): Its frequency is software trimmable from 100KHZ to 48MHZ. + It can be used to generate the clock for the USB OTG FS (48 MHz). + The number of flash wait states is automatically adjusted when MSI range is updated with + HAL_RCC_OscConfig() and the MSI is used as System clock source. + + (+) LSI (low-speed internal): 32 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (+) HSE (high-speed external): 4 to 48 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also optionally as RTC clock source. + + (+) LSE (low-speed external): 32.768 KHz oscillator used optionally as RTC clock source. + + (+) PLL (clocked by HSI, HSE or MSI) providing up to three independent output clocks: + (++) The first output is used to generate the high speed system clock (up to 80MHz). + (++) The second output is used to generate the clock for the USB OTG FS (48 MHz), + the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz). + (++) The third output is used to generate an accurate clock to achieve + high-quality audio performance on SAI interface. + + (+) PLLSAI1 (clocked by HSI, HSE or MSI) providing up to three independent output clocks: + (++) The first output is used to generate SAR ADC1 clock. + (++) The second output is used to generate the clock for the USB OTG FS (48 MHz), + the random analog generator (<=48 MHz) and the SDMMC1 (<= 48 MHz). + (++) The third output is used to generate an accurate clock to achieve + high-quality audio performance on SAI interface. + + (+) PLLSAI2 (clocked by HSI, HSE or MSI) providing up to three independent output clocks: + (++) The first output is used to generate an accurate clock to achieve + high-quality audio performance on SAI interface. + (++) The second output is used to generate either SAR ADC2 clock if ADC2 is present + or LCD clock if LTDC is present. + (++) The third output is used to generate DSI clock if DSI is present. + + (+) CSS (Clock security system): once enabled, if a HSE clock failure occurs + (HSE used directly or through PLL as System clock source), the System clock + is automatically switched to HSI and an interrupt is generated if enabled. + The interrupt is linked to the Cortex-M4 NMI (Non-Maskable Interrupt) + exception vector. + + (+) MCO (microcontroller clock output): used to output MSI, LSI, HSI, LSE, HSE or + main PLL clock (through a configurable prescaler) on PA8 pin. + + [..] System, AHB and APB busses clocks configuration + (+) Several clock sources can be used to drive the System clock (SYSCLK): MSI, HSI, + HSE and main PLL. + The AHB clock (HCLK) is derived from System clock through configurable + prescaler and used to clock the CPU, memory and peripherals mapped + on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived + from AHB clock through configurable prescalers and used to clock + the peripherals mapped on these busses. You can use + "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. + + -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: + + (+@) SAI: the SAI clock can be derived either from a specific PLL (PLLSAI1) or (PLLSAI2) or + from an external clock mapped on the SAI_CKIN pin. + You have to use HAL_RCCEx_PeriphCLKConfig() function to configure this clock. + (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock + divided by 2 to 31. + You have to use __HAL_RCC_RTC_ENABLE() and HAL_RCCEx_PeriphCLKConfig() function + to configure this clock. + (+@) USB OTG FS, SDMMC1 and RNG: USB OTG FS requires a frequency equal to 48 MHz + to work correctly, while the SDMMC1 and RNG peripherals require a frequency + equal or lower than to 48 MHz. This clock is derived of the main PLL or PLLSAI1 + through PLLQ divider. You have to enable the peripheral clock and use + HAL_RCCEx_PeriphCLKConfig() function to configure this clock. + (+@) IWDG clock which is always the LSI clock. + + + (+) The maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is 80 MHz. + The clock source frequency should be adapted depending on the device voltage range + as listed in the Reference Manual "Clock source frequency versus voltage scaling" chapter. + + @endverbatim + + Table 1. HCLK clock frequency for other STM32L4 devices + +-------------------------------------------------------+ + | Latency | HCLK clock frequency (MHz) | + | |-------------------------------------| + | | voltage range 1 | voltage range 2 | + | | 1.2 V | 1.0 V | + |-----------------|------------------|------------------| + |0WS(1 CPU cycles)| 0 < HCLK <= 16 | 0 < HCLK <= 6 | + |-----------------|------------------|------------------| + |1WS(2 CPU cycles)| 16 < HCLK <= 32 | 6 < HCLK <= 12 | + |-----------------|------------------|------------------| + |2WS(3 CPU cycles)| 32 < HCLK <= 48 | 12 < HCLK <= 18 | + |-----------------|------------------|------------------| + |3WS(4 CPU cycles)| 48 < HCLK <= 64 | 18 < HCLK <= 26 | + |-----------------|------------------|------------------| + |4WS(5 CPU cycles)| 64 < HCLK <= 80 | 18 < HCLK <= 26 | + +-------------------------------------------------------+ + + Table 2. HCLK clock frequency for STM32L4+ devices + +--------------------------------------------------------+ + | Latency | HCLK clock frequency (MHz) | + | |--------------------------------------| + | | voltage range 1 | voltage range 2 | + | | 1.2 V | 1.0 V | + |-----------------|-------------------|------------------| + |0WS(1 CPU cycles)| 0 < HCLK <= 20 | 0 < HCLK <= 8 | + |-----------------|-------------------|------------------| + |1WS(2 CPU cycles)| 20 < HCLK <= 40 | 8 < HCLK <= 16 | + |-----------------|-------------------|------------------| + |2WS(3 CPU cycles)| 40 < HCLK <= 60 | 16 < HCLK <= 26 | + |-----------------|-------------------|------------------| + |3WS(4 CPU cycles)| 60 < HCLK <= 80 | 16 < HCLK <= 26 | + |-----------------|-------------------|------------------| + |4WS(5 CPU cycles)| 80 < HCLK <= 100 | 16 < HCLK <= 26 | + |-----------------|-------------------|------------------| + |5WS(6 CPU cycles)| 100 < HCLK <= 120 | 16 < HCLK <= 26 | + +--------------------------------------------------------+ + * @{ + */ + +/** + * @brief Reset the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - MSI ON and used as system clock source + * - HSE, HSI, PLL, PLLSAI1 and PLLSAI2 OFF + * - AHB, APB1 and APB2 prescalers set to 1. + * - CSS, MCO1 OFF + * - All interrupts disabled + * - All interrupt and reset flags cleared + * @note This function does not modify the configuration of the + * - Peripheral clock sources + * - LSI, LSE and RTC clocks (Backup domain) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Reset to default System clock */ + /* Set MSION bit */ + SET_BIT(RCC->CR, RCC_CR_MSION); + + /* Insure MSIRDY bit is set before writing default MSIRANGE value */ + /* Get start tick */ + tickstart = HAL_GetTick(); + + /* Wait till MSI is ready */ + while(READ_BIT(RCC->CR, RCC_CR_MSIRDY) == 0U) + { + if((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set MSIRANGE default value */ + MODIFY_REG(RCC->CR, RCC_CR_MSIRANGE, RCC_MSIRANGE_6); + + /* Reset CFGR register (MSI is selected as system clock source) */ + CLEAR_REG(RCC->CFGR); + + /* Update the SystemCoreClock global variable for MSI as system clock source */ + SystemCoreClock = MSI_VALUE; + + /* Configure the source of time base considering new system clock settings */ + if(HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + + /* Insure MSI selected as system clock source */ + /* Get start tick */ + tickstart = HAL_GetTick(); + + /* Wait till system clock source is ready */ + while(READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != RCC_CFGR_SWS_MSI) + { + if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Reset HSION, HSIKERON, HSIASFS, HSEON, HSECSSON, PLLON, PLLSAIxON bits */ +#if defined(RCC_PLLSAI2_SUPPORT) + + CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSION | RCC_CR_HSIKERON| RCC_CR_HSIASFS | RCC_CR_PLLON | RCC_CR_PLLSAI1ON | RCC_CR_PLLSAI2ON); + +#elif defined(RCC_PLLSAI1_SUPPORT) + + CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSION | RCC_CR_HSIKERON| RCC_CR_HSIASFS | RCC_CR_PLLON | RCC_CR_PLLSAI1ON); + +#else + + CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSION | RCC_CR_HSIKERON| RCC_CR_HSIASFS | RCC_CR_PLLON); + +#endif /* RCC_PLLSAI2_SUPPORT */ + + /* Insure PLLRDY, PLLSAI1RDY and PLLSAI2RDY (if present) are reset */ + /* Get start tick */ + tickstart = HAL_GetTick(); + +#if defined(RCC_PLLSAI2_SUPPORT) + + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY | RCC_CR_PLLSAI1RDY | RCC_CR_PLLSAI2RDY) != 0U) + +#elif defined(RCC_PLLSAI1_SUPPORT) + + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY | RCC_CR_PLLSAI1RDY) != 0U) + +#else + + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + +#endif + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Reset PLLCFGR register */ + CLEAR_REG(RCC->PLLCFGR); + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN_4 ); + +#if defined(RCC_PLLSAI1_SUPPORT) + + /* Reset PLLSAI1CFGR register */ + CLEAR_REG(RCC->PLLSAI1CFGR); + SET_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N_4 ); + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + + /* Reset PLLSAI2CFGR register */ + CLEAR_REG(RCC->PLLSAI2CFGR); + SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N_4 ); + +#endif /* RCC_PLLSAI2_SUPPORT */ + + /* Reset HSEBYP bit */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); + + /* Disable all interrupts */ + CLEAR_REG(RCC->CIER); + + /* Clear all interrupt flags */ + WRITE_REG(RCC->CICR, 0xFFFFFFFFU); + + /* Clear all reset flags */ + SET_BIT(RCC->CSR, RCC_CSR_RMVF); + + return HAL_OK; +} + +/** + * @brief Initialize the RCC Oscillators according to the specified parameters in the + * RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note The PLL source is not updated when used as PLLSAI(s) clock source. + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this macro. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this macro. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @note If HSE failed to start, HSE should be disabled before recalling + HAL_RCC_OscConfig(). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + HAL_StatusTypeDef status; + uint32_t sysclk_source, pll_config; + + /* Check Null pointer */ + if(RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + sysclk_source = __HAL_RCC_GET_SYSCLK_SOURCE(); + pll_config = __HAL_RCC_GET_PLL_OSCSOURCE(); + + /*----------------------------- MSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_MSI) == RCC_OSCILLATORTYPE_MSI) + { + /* Check the parameters */ + assert_param(IS_RCC_MSI(RCC_OscInitStruct->MSIState)); + assert_param(IS_RCC_MSICALIBRATION_VALUE(RCC_OscInitStruct->MSICalibrationValue)); + assert_param(IS_RCC_MSI_CLOCK_RANGE(RCC_OscInitStruct->MSIClockRange)); + + /* Check if MSI is used as system clock or as PLL source when PLL is selected as system clock */ + if((sysclk_source == RCC_CFGR_SWS_MSI) || + ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_config == RCC_PLLSOURCE_MSI))) + { + if((READ_BIT(RCC->CR, RCC_CR_MSIRDY) != 0U) && (RCC_OscInitStruct->MSIState == RCC_MSI_OFF)) + { + return HAL_ERROR; + } + + /* Otherwise, just the calibration and MSI range change are allowed */ + else + { + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) and the supply voltage of the device. */ + if(RCC_OscInitStruct->MSIClockRange > __HAL_RCC_GET_MSI_RANGE()) + { + /* First increase number of wait states update if necessary */ + if(RCC_SetFlashLatencyFromMSIRange(RCC_OscInitStruct->MSIClockRange) != HAL_OK) + { + return HAL_ERROR; + } + + /* Selects the Multiple Speed oscillator (MSI) clock range .*/ + __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); + /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ + __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); + } + else + { + /* Else, keep current flash latency while decreasing applies */ + /* Selects the Multiple Speed oscillator (MSI) clock range .*/ + __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); + /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ + __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); + + /* Decrease number of wait states update if necessary */ + /* Only possible when MSI is the System clock source */ + if(sysclk_source == RCC_CFGR_SWS_MSI) + { + if(RCC_SetFlashLatencyFromMSIRange(RCC_OscInitStruct->MSIClockRange) != HAL_OK) + { + return HAL_ERROR; + } + } + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> (AHBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos] & 0x1FU); + + /* Configure the source of time base considering new system clocks settings*/ + status = HAL_InitTick(uwTickPrio); + if(status != HAL_OK) + { + return status; + } + } + } + else + { + /* Check the MSI State */ + if(RCC_OscInitStruct->MSIState != RCC_MSI_OFF) + { + /* Enable the Internal High Speed oscillator (MSI). */ + __HAL_RCC_MSI_ENABLE(); + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait till MSI is ready */ + while(READ_BIT(RCC->CR, RCC_CR_MSIRDY) == 0U) + { + if((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Selects the Multiple Speed oscillator (MSI) clock range .*/ + __HAL_RCC_MSI_RANGE_CONFIG(RCC_OscInitStruct->MSIClockRange); + /* Adjusts the Multiple Speed oscillator (MSI) calibration value.*/ + __HAL_RCC_MSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->MSICalibrationValue); + + } + else + { + /* Disable the Internal High Speed oscillator (MSI). */ + __HAL_RCC_MSI_DISABLE(); + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait till MSI is ready */ + while(READ_BIT(RCC->CR, RCC_CR_MSIRDY) != 0U) + { + if((HAL_GetTick() - tickstart) > MSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------- HSE Configuration ------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ + if((sysclk_source == RCC_CFGR_SWS_HSE) || + ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_config == RCC_PLLSOURCE_HSE))) + { + if((READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + /* Check the HSE State */ + if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while(READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + if((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + while(READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + if((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_HSI_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ + if((sysclk_source == RCC_CFGR_SWS_HSI) || + ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_config == RCC_PLLSOURCE_HSI))) + { + /* When HSI is used as system clock it will not be disabled */ + if((READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) && (RCC_OscInitStruct->HSIState == RCC_HSI_OFF)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + } + else + { + /* Check the HSI State */ + if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF) + { + /* Enable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while(READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while(READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) + { + if((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + { +#if defined(RCC_CSR_LSIPREDIV) + uint32_t csr_temp = RCC->CSR; + + /* Check LSI division factor */ + assert_param(IS_RCC_LSIDIV(RCC_OscInitStruct->LSIDiv)); + + if (RCC_OscInitStruct->LSIDiv != (csr_temp & RCC_CSR_LSIPREDIV)) + { + if (((csr_temp & RCC_CSR_LSIRDY) == RCC_CSR_LSIRDY) && \ + ((csr_temp & RCC_CSR_LSION) != RCC_CSR_LSION)) + { + /* If LSIRDY is set while LSION is not enabled, + LSIPREDIV can't be updated */ + return HAL_ERROR; + } + + /* Turn off LSI before changing RCC_CSR_LSIPREDIV */ + if ((csr_temp & RCC_CSR_LSION) == RCC_CSR_LSION) + { + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + while(READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + { + if((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set LSI division factor */ + MODIFY_REG(RCC->CSR, RCC_CSR_LSIPREDIV, RCC_OscInitStruct->LSIDiv); + } +#endif /* RCC_CSR_LSIPREDIV */ + + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while(READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == 0U) + { + if((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + while(READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) != 0U) + { + if((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + FlagStatus pwrclkchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Update LSE configuration in Backup Domain control register */ + /* Requires to enable write access to Backup Domain of necessary */ + if(HAL_IS_BIT_CLR(RCC->APB1ENR1, RCC_APB1ENR1_PWREN)) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /* Set the new LSE configuration -----------------------------------------*/ +#if defined(RCC_BDCR_LSESYSDIS) + if((RCC_OscInitStruct->LSEState & RCC_BDCR_LSEON) != 0U) + { + /* Set LSESYSDIS bit according to LSE propagation option (enabled or disabled) */ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSESYSDIS, (RCC_OscInitStruct->LSEState & RCC_BDCR_LSESYSDIS)); + + if((RCC_OscInitStruct->LSEState & RCC_BDCR_LSEBYP) != 0U) + { + /* LSE oscillator bypass enable */ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); + } + else + { + /* LSE oscillator enable */ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); + } + } + else + { + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); + } +#else + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); +#endif /* RCC_BDCR_LSESYSDIS */ + + /* Check the LSE State */ + if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) != 0U) + { + if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + +#if defined(RCC_BDCR_LSESYSDIS) + /* By default, stop disabling LSE propagation */ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSESYSDIS); +#endif /* RCC_BDCR_LSESYSDIS */ + } + + /* Restore clock configuration if changed */ + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } +#if defined(RCC_HSI48_SUPPORT) + /*------------------------------ HSI48 Configuration -----------------------*/ + if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State)); + + /* Check the LSI State */ + if(RCC_OscInitStruct->HSI48State != RCC_HSI48_OFF) + { + /* Enable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48RDY) == 0U) + { + if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is disabled */ + while(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } +#endif /* RCC_HSI48_SUPPORT */ + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + + if(RCC_OscInitStruct->PLL.PLLState != RCC_PLL_NONE) + { + /* PLL On ? */ + if(RCC_OscInitStruct->PLL.PLLState == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); + assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); +#if defined(RCC_PLLP_SUPPORT) + assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); +#endif /* RCC_PLLP_SUPPORT */ + assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); + assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); + + /* Do nothing if PLL configuration is the unchanged */ + pll_config = RCC->PLLCFGR; + if((READ_BIT(pll_config, RCC_PLLCFGR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLM) != ((RCC_OscInitStruct->PLL.PLLM - 1U) << RCC_PLLCFGR_PLLM_Pos)) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLN) != (RCC_OscInitStruct->PLL.PLLN << RCC_PLLCFGR_PLLN_Pos)) || +#if defined(RCC_PLLP_SUPPORT) +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) + (READ_BIT(pll_config, RCC_PLLCFGR_PLLPDIV) != (RCC_OscInitStruct->PLL.PLLP << RCC_PLLCFGR_PLLPDIV_Pos)) || +#else + (READ_BIT(pll_config, RCC_PLLCFGR_PLLP) != ((RCC_OscInitStruct->PLL.PLLP == RCC_PLLP_DIV7) ? 0U : 1U)) || +#endif +#endif + (READ_BIT(pll_config, RCC_PLLCFGR_PLLQ) != ((((RCC_OscInitStruct->PLL.PLLQ) >> 1U) - 1U) << RCC_PLLCFGR_PLLQ_Pos)) || + (READ_BIT(pll_config, RCC_PLLCFGR_PLLR) != ((((RCC_OscInitStruct->PLL.PLLR) >> 1U) - 1U) << RCC_PLLCFGR_PLLR_Pos))) + { + /* Check if the PLL is used as system clock or not */ + if(sysclk_source != RCC_CFGR_SWS_PLL) + { +#if defined(RCC_PLLSAI1_SUPPORT) || defined(RCC_PLLSAI2_SUPPORT) + /* Check if main PLL can be updated */ + /* Not possible if the source is shared by other enabled PLLSAIx */ + if((READ_BIT(RCC->CR, RCC_CR_PLLSAI1ON) != 0U) +#if defined(RCC_PLLSAI2_SUPPORT) + || (READ_BIT(RCC->CR, RCC_CR_PLLSAI2ON) != 0U) +#endif + ) + { + return HAL_ERROR; + } + else +#endif /* RCC_PLLSAI1_SUPPORT || RCC_PLLSAI2_SUPPORT */ + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the main PLL clock source, multiplication and division factors. */ +#if defined(RCC_PLLP_SUPPORT) + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLM, + RCC_OscInitStruct->PLL.PLLN, + RCC_OscInitStruct->PLL.PLLP, + RCC_OscInitStruct->PLL.PLLQ, + RCC_OscInitStruct->PLL.PLLR); +#else + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLM, + RCC_OscInitStruct->PLL.PLLN, + RCC_OscInitStruct->PLL.PLLQ, + RCC_OscInitStruct->PLL.PLLR); +#endif + + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Enable PLL System Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SYSCLK); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else + { + /* PLL is already used as System core clock */ + return HAL_ERROR; + } + } + else + { + /* PLL configuration is unchanged */ + /* Re-enable PLL if it was disabled (ie. low power mode) */ + if(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Enable PLL System Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SYSCLK); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + else + { + /* Check that PLL is not used as system clock or not */ + if(sysclk_source != RCC_CFGR_SWS_PLL) + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while(READ_BIT(RCC->CR, RCC_CR_PLLRDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Unselect main PLL clock source and disable main PLL outputs to save power */ +#if defined(RCC_PLLSAI2_SUPPORT) + RCC->PLLCFGR &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLL_SYSCLK | RCC_PLL_48M1CLK | RCC_PLL_SAI3CLK); +#elif defined(RCC_PLLSAI1_SUPPORT) + RCC->PLLCFGR &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLL_SYSCLK | RCC_PLL_48M1CLK | RCC_PLL_SAI2CLK); +#else + RCC->PLLCFGR &= ~(RCC_PLLCFGR_PLLSRC | RCC_PLL_SYSCLK | RCC_PLL_48M1CLK); +#endif /* RCC_PLLSAI2_SUPPORT */ + } + else + { + /* PLL is already used as System core clock */ + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief Initialize the CPU, AHB and APB busses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency FLASH Latency + * This parameter can be one of the following values: + * @arg FLASH_LATENCY_0 FLASH 0 Latency cycle + * @arg FLASH_LATENCY_1 FLASH 1 Latency cycle + * @arg FLASH_LATENCY_2 FLASH 2 Latency cycles + * @arg FLASH_LATENCY_3 FLASH 3 Latency cycles + * @arg FLASH_LATENCY_4 FLASH 4 Latency cycles + @if STM32L4S9xx + * @arg FLASH_LATENCY_5 FLASH 5 Latency cycles + * @arg FLASH_LATENCY_6 FLASH 6 Latency cycles + * @arg FLASH_LATENCY_7 FLASH 7 Latency cycles + * @arg FLASH_LATENCY_8 FLASH 8 Latency cycles + * @arg FLASH_LATENCY_9 FLASH 9 Latency cycles + * @arg FLASH_LATENCY_10 FLASH 10 Latency cycles + * @arg FLASH_LATENCY_11 FLASH 11 Latency cycles + * @arg FLASH_LATENCY_12 FLASH 12 Latency cycles + * @arg FLASH_LATENCY_13 FLASH 13 Latency cycles + * @arg FLASH_LATENCY_14 FLASH 14 Latency cycles + * @arg FLASH_LATENCY_15 FLASH 15 Latency cycles + @endif + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated by HAL_RCC_GetHCLKFreq() function called within this function + * + * @note The MSI is used by default as system clock source after + * startup from Reset, wake-up from STANDBY mode. After restart from Reset, + * the MSI frequency is set to its default value 4 MHz. + * + * @note The HSI can be selected as system clock source after + * from STOP modes or in case of failure of the HSE used directly or indirectly + * as system clock (if the Clock Security System CSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after startup delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source is ready. + * + * @note You can use HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * + * @note Depending on the device voltage range, the software has to set correctly + * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency + * (for more details refer to section above "Initialization/de-initialization functions") + * @retval None + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + uint32_t tickstart; +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + uint32_t hpre = RCC_SYSCLK_DIV1; +#endif + HAL_StatusTypeDef status; + + /* Check Null pointer */ + if(RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) and the supply voltage of the device. */ + + /* Increasing the number of wait states because of higher CPU frequency */ + if(FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + } + + /*----------------- HCLK Configuration prior to SYSCLK----------------------*/ + /* Apply higher HCLK prescaler request here to ensure CPU clock is not of of spec when SYSCLK is increased */ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + + if(RCC_ClkInitStruct->AHBCLKDivider > READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + } + + /*------------------------- SYSCLK Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + + /* PLL is selected as System Clock Source */ + if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + /* Check the PLL ready flag */ + if(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + return HAL_ERROR; + } +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + /* Undershoot management when selection PLL as SYSCLK source and frequency above 80Mhz */ + /* Compute target PLL output frequency */ + if(RCC_GetSysClockFreqFromPLLSource() > 80000000U) + { + /* If lowest HCLK prescaler, apply intermediate step with HCLK prescaler 2 necessary before to go over 80Mhz */ + if(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) == RCC_SYSCLK_DIV1) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_SYSCLK_DIV2); + hpre = RCC_SYSCLK_DIV2; + } + } +#endif + } + else + { + /* HSE is selected as System Clock Source */ + if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if(READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U) + { + return HAL_ERROR; + } + } + /* MSI is selected as System Clock Source */ + else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_MSI) + { + /* Check the MSI ready flag */ + if(READ_BIT(RCC->CR, RCC_CR_MSIRDY) == 0U) + { + return HAL_ERROR; + } + } + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if(READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + return HAL_ERROR; + } + } +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + /* Overshoot management when going down from PLL as SYSCLK source and frequency above 80Mhz */ + if(HAL_RCC_GetSysClockFreq() > 80000000U) + { + /* If lowest HCLK prescaler, apply intermediate step with HCLK prescaler 2 necessary before to go under 80Mhz */ + if(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) == RCC_SYSCLK_DIV1) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_SYSCLK_DIV2); + hpre = RCC_SYSCLK_DIV2; + } + } +#endif + + } + + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + while(__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + /* Is intermediate HCLK prescaler 2 applied internally, resume with HCLK prescaler 1 */ + if(hpre == RCC_SYSCLK_DIV2) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_SYSCLK_DIV1); + } +#endif + + /*----------------- HCLK Configuration after SYSCLK-------------------------*/ + /* Apply lower HCLK prescaler request here to ensure CPU clock is not of of spec when SYSCLK is set */ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { + if(RCC_ClkInitStruct->AHBCLKDivider < READ_BIT(RCC->CFGR, RCC_CFGR_HPRE)) + { + MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } + } + + /* Allow decreasing of the number of wait states (because of lower CPU frequency expected) */ + if(FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); + } + + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { + assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3U)); + } + + /* Update the SystemCoreClock global variable */ + SystemCoreClock = HAL_RCC_GetSysClockFreq() >> (AHBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos] & 0x1FU); + + /* Configure the source of time base considering new system clocks settings*/ + status = HAL_InitTick(uwTickPrio); + + return status; +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to: + + (+) Output clock to MCO pin. + (+) Retrieve current clock frequencies. + (+) Enable the Clock Security System. + +@endverbatim + * @{ + */ + +/** + * @brief Select the clock source to output on MCO pin(PA8). + * @note PA8 should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * For STM32L4xx family this parameter can have only one value: + * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8). + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCO1SOURCE_NOCLOCK MCO output disabled, no clock on MCO + * @arg @ref RCC_MCO1SOURCE_SYSCLK system clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_MSI MSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_PLLCLK main PLL clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSI LSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_LSE LSE clock selected as MCO source + @if STM32L443xx + * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48 + @endif + * @param RCC_MCODiv specifies the MCO prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @arg @ref RCC_MCODIV_2 division by 2 applied to MCO clock + * @arg @ref RCC_MCODIV_4 division by 4 applied to MCO clock + * @arg @ref RCC_MCODIV_8 division by 8 applied to MCO clock + * @arg @ref RCC_MCODIV_16 division by 16 applied to MCO clock + * @retval None + */ +void HAL_RCC_MCOConfig( uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + + /* Prevent unused argument(s) compilation warning if no assert_param check */ + UNUSED(RCC_MCOx); + + /* MCO Clock Enable */ + __MCO1_CLK_ENABLE(); + + /* Configure the MCO1 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO1_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF0_MCO; + HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct); + + /* Mask MCOSEL[] and MCOPRE[] bits then set MCO1 clock source and prescaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), (RCC_MCOSource | RCC_MCODiv )); +} + +/** + * @brief Return the SYSCLK frequency. + * + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is MSI, function returns values based on MSI + * Value as defined by the MSI range. + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**) + * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**), + * HSI_VALUE(*) or MSI Value multiplied/divided by the PLL factors. + * @note (*) HSI_VALUE is a constant defined in stm32l4xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSE_VALUE is a constant defined in stm32l4xx_hal_conf.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baudrate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + uint32_t msirange = 0U, sysclockfreq = 0U; + uint32_t pllvco, pllsource, pllr, pllm; /* no init needed */ + uint32_t sysclk_source, pll_oscsource; + + sysclk_source = __HAL_RCC_GET_SYSCLK_SOURCE(); + pll_oscsource = __HAL_RCC_GET_PLL_OSCSOURCE(); + + if((sysclk_source == RCC_CFGR_SWS_MSI) || + ((sysclk_source == RCC_CFGR_SWS_PLL) && (pll_oscsource == RCC_PLLSOURCE_MSI))) + { + /* MSI or PLL with MSI source used as system clock source */ + + /* Get SYSCLK source */ + if(READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) == 0U) + { /* MSISRANGE from RCC_CSR applies */ + msirange = READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE) >> RCC_CSR_MSISRANGE_Pos; + } + else + { /* MSIRANGE from RCC_CR applies */ + msirange = READ_BIT(RCC->CR, RCC_CR_MSIRANGE) >> RCC_CR_MSIRANGE_Pos; + } + /*MSI frequency range in HZ*/ + msirange = MSIRangeTable[msirange]; + + if(sysclk_source == RCC_CFGR_SWS_MSI) + { + /* MSI used as system clock source */ + sysclockfreq = msirange; + } + } + else if(sysclk_source == RCC_CFGR_SWS_HSI) + { + /* HSI used as system clock source */ + sysclockfreq = HSI_VALUE; + } + else if(sysclk_source == RCC_CFGR_SWS_HSE) + { + /* HSE used as system clock source */ + sysclockfreq = HSE_VALUE; + } + else + { + /* unexpected case: sysclockfreq at 0 */ + } + + if(sysclk_source == RCC_CFGR_SWS_PLL) + { + /* PLL used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE) * PLLN / PLLM + SYSCLK = PLL_VCO / PLLR + */ + pllsource = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); + + switch (pllsource) + { + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + pllvco = HSI_VALUE; + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllvco = HSE_VALUE; + break; + + case RCC_PLLSOURCE_MSI: /* MSI used as PLL clock source */ + default: + pllvco = msirange; + break; + } + pllm = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U ; + pllvco = (pllvco * (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)) / pllm; + pllr = ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U ) * 2U; + sysclockfreq = pllvco / pllr; + } + + return sysclockfreq; +} + +/** + * @brief Return the HCLK frequency. + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency. + * @retval HCLK frequency in Hz + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + return SystemCoreClock; +} + +/** + * @brief Return the PCLK1 frequency. + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (APBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_Pos] & 0x1FU)); +} + +/** + * @brief Return the PCLK2 frequency. + * @note Each time PCLK2 changes, this function must be called to update the + * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK2 frequency in Hz + */ +uint32_t HAL_RCC_GetPCLK2Freq(void) +{ + /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq()>> (APBPrescTable[READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_Pos] & 0x1FU)); +} + +/** + * @brief Configure the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Check the parameters */ + assert_param(RCC_OscInitStruct != (void *)NULL); + + /* Set all possible values for the Oscillator type parameter ---------------*/ +#if defined(RCC_HSI48_SUPPORT) + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_MSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI48; +#else + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_MSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; +#endif /* RCC_HSI48_SUPPORT */ + + /* Get the HSE configuration -----------------------------------------------*/ + if(READ_BIT(RCC->CR, RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if(READ_BIT(RCC->CR, RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + + /* Get the MSI configuration -----------------------------------------------*/ + if(READ_BIT(RCC->CR, RCC_CR_MSION) == RCC_CR_MSION) + { + RCC_OscInitStruct->MSIState = RCC_MSI_ON; + } + else + { + RCC_OscInitStruct->MSIState = RCC_MSI_OFF; + } + + RCC_OscInitStruct->MSICalibrationValue = READ_BIT(RCC->ICSCR, RCC_ICSCR_MSITRIM) >> RCC_ICSCR_MSITRIM_Pos; + RCC_OscInitStruct->MSIClockRange = READ_BIT(RCC->CR, RCC_CR_MSIRANGE); + + /* Get the HSI configuration -----------------------------------------------*/ + if(READ_BIT(RCC->CR, RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + + RCC_OscInitStruct->HSICalibrationValue = READ_BIT(RCC->ICSCR, RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos; + + /* Get the LSE configuration -----------------------------------------------*/ + if(READ_BIT(RCC->BDCR, RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) + { +#if defined(RCC_BDCR_LSESYSDIS) + if((RCC->BDCR & RCC_BDCR_LSESYSDIS) == RCC_BDCR_LSESYSDIS) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS_RTC_ONLY; + } + else +#endif /* RCC_BDCR_LSESYSDIS */ + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + } + else if(READ_BIT(RCC->BDCR, RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { +#if defined(RCC_BDCR_LSESYSDIS) + if((RCC->BDCR & RCC_BDCR_LSESYSDIS) == RCC_BDCR_LSESYSDIS) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON_RTC_ONLY; + } + else +#endif /* RCC_BDCR_LSESYSDIS */ + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if(READ_BIT(RCC->CSR, RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } +#if defined(RCC_CSR_LSIPREDIV) + + /* Get the LSI configuration -----------------------------------------------*/ + if((RCC->CSR & RCC_CSR_LSIPREDIV) == RCC_CSR_LSIPREDIV) + { + RCC_OscInitStruct->LSIDiv = RCC_LSI_DIV128; + } + else + { + RCC_OscInitStruct->LSIDiv = RCC_LSI_DIV1; + } +#endif /* RCC_CSR_LSIPREDIV */ + +#if defined(RCC_HSI48_SUPPORT) + /* Get the HSI48 configuration ---------------------------------------------*/ + if(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON) == RCC_CRRCR_HSI48ON) + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_ON; + } + else + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_OFF; + } +#else + RCC_OscInitStruct->HSI48State = RCC_HSI48_OFF; +#endif /* RCC_HSI48_SUPPORT */ + + /* Get the PLL configuration -----------------------------------------------*/ + if(READ_BIT(RCC->CR, RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); + RCC_OscInitStruct->PLL.PLLM = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U; + RCC_OscInitStruct->PLL.PLLN = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + RCC_OscInitStruct->PLL.PLLQ = (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U); + RCC_OscInitStruct->PLL.PLLR = (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U) << 1U); +#if defined(RCC_PLLP_SUPPORT) +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) + RCC_OscInitStruct->PLL.PLLP = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; +#else + if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != 0U) + { + RCC_OscInitStruct->PLL.PLLP = RCC_PLLP_DIV17; + } + else + { + RCC_OscInitStruct->PLL.PLLP = RCC_PLLP_DIV7; + } +#endif /* RCC_PLLP_DIV_2_31_SUPPORT */ +#endif /* RCC_PLLP_SUPPORT */ +} + +/** + * @brief Configure the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that + * will be configured. + * @param pFLatency Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Check the parameters */ + assert_param(RCC_ClkInitStruct != (void *)NULL); + assert_param(pFLatency != (void *)NULL); + + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = READ_BIT(RCC->CFGR, RCC_CFGR_SW); + + /* Get the HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = READ_BIT(RCC->CFGR, RCC_CFGR_HPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1); + + /* Get the APB2 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB2CLKDivider = (READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2) >> 3U); + + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = __HAL_FLASH_GET_LATENCY(); +} + +/** + * @brief Enable the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector. + * @note The Clock Security System can only be cleared by reset. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSON) ; +} + +/** + * @brief Handle the RCC Clock Security System interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + /* Check RCC CSSF interrupt flag */ + if(__HAL_RCC_GET_IT(RCC_IT_CSS)) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + + /* Clear RCC CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_CSS); + } +} + +/** + * @brief RCC Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_RCC_CSSCallback should be implemented in the user file + */ +} + +/** + * @brief Get and clear reset flags + * @param None + * @note Once reset flags are retrieved, this API is clearing them in order + * to isolate next reset reason. + * @retval can be a combination of @ref RCC_Reset_Flag + */ +uint32_t HAL_RCC_GetResetSource(void) +{ + uint32_t reset; + + /* Get all reset flags */ + reset = RCC->CSR & RCC_RESET_FLAG_ALL; + + /* Clear Reset flags */ + RCC->CSR |= RCC_CSR_RMVF; + + return reset; +} + +/** * @} + */ + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup RCC_Private_Functions + * @{ + */ +/** + * @brief Update number of Flash wait states in line with MSI range and current + voltage range. + * @param msirange MSI range value from RCC_MSIRANGE_0 to RCC_MSIRANGE_11 + * @retval HAL status + */ +static HAL_StatusTypeDef RCC_SetFlashLatencyFromMSIRange(uint32_t msirange) +{ + uint32_t vos; + uint32_t latency = FLASH_LATENCY_0; /* default value 0WS */ + + if(__HAL_RCC_PWR_IS_CLK_ENABLED()) + { + vos = HAL_PWREx_GetVoltageRange(); + } + else + { + __HAL_RCC_PWR_CLK_ENABLE(); + vos = HAL_PWREx_GetVoltageRange(); + __HAL_RCC_PWR_CLK_DISABLE(); + } + + if(vos == PWR_REGULATOR_VOLTAGE_SCALE1) + { + if(msirange > RCC_MSIRANGE_8) + { + /* MSI > 16Mhz */ + if(msirange > RCC_MSIRANGE_10) + { + /* MSI 48Mhz */ + latency = FLASH_LATENCY_2; /* 2WS */ + } + else + { + /* MSI 24Mhz or 32Mhz */ + latency = FLASH_LATENCY_1; /* 1WS */ + } + } + /* else MSI <= 16Mhz default FLASH_LATENCY_0 0WS */ + } + else + { +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + if(msirange >= RCC_MSIRANGE_8) + { + /* MSI >= 16Mhz */ + latency = FLASH_LATENCY_2; /* 2WS */ + } + else + { + if(msirange == RCC_MSIRANGE_7) + { + /* MSI 8Mhz */ + latency = FLASH_LATENCY_1; /* 1WS */ + } + /* else MSI < 8Mhz default FLASH_LATENCY_0 0WS */ + } +#else + if(msirange > RCC_MSIRANGE_8) + { + /* MSI > 16Mhz */ + latency = FLASH_LATENCY_3; /* 3WS */ + } + else + { + if(msirange == RCC_MSIRANGE_8) + { + /* MSI 16Mhz */ + latency = FLASH_LATENCY_2; /* 2WS */ + } + else if(msirange == RCC_MSIRANGE_7) + { + /* MSI 8Mhz */ + latency = FLASH_LATENCY_1; /* 1WS */ + } + else + { + /* else MSI < 8Mhz default FLASH_LATENCY_0 0WS */ + /* nothing to do */ + } + } +#endif + } + + __HAL_FLASH_SET_LATENCY(latency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if(__HAL_FLASH_GET_LATENCY() != latency) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +/** + * @brief Compute SYSCLK frequency based on PLL SYSCLK source. + * @retval SYSCLK frequency + */ +static uint32_t RCC_GetSysClockFreqFromPLLSource(void) +{ + uint32_t msirange, pllvco, pllsource, pllr, pllm, sysclockfreq; /* no init needed */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE) * PLLN / PLLM + SYSCLK = PLL_VCO / PLLR + */ + pllsource = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC); + + switch (pllsource) + { + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + pllvco = HSI_VALUE; + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllvco = HSE_VALUE; + break; + + case RCC_PLLSOURCE_MSI: /* MSI used as PLL clock source */ + /* Get MSI range source */ + if(READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) == 0U) + { /* MSISRANGE from RCC_CSR applies */ + msirange = READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE) >> RCC_CSR_MSISRANGE_Pos; + } + else + { /* MSIRANGE from RCC_CR applies */ + msirange = READ_BIT(RCC->CR, RCC_CR_MSIRANGE) >> RCC_CR_MSIRANGE_Pos; + } + /*MSI frequency range in HZ*/ + pllvco = MSIRangeTable[msirange]; + break; + default: + /* unexpected */ + pllvco = 0; + break; + } + pllm = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U ; + pllvco = (pllvco * (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos)) / pllm; + pllr = ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U ) * 2U; + sysclockfreq = pllvco / pllr; + + return sysclockfreq; +} +#endif + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c new file mode 100644 index 0000000..6ab96aa --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_rcc_ex.c @@ -0,0 +1,3556 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extended peripheral: + * + Extended Peripheral Control functions + * + Extended Clock management functions + * + Extended Clock Recovery System Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup RCCEx RCCEx + * @brief RCC Extended HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Constants RCCEx Private Constants + * @{ + */ +#define PLLSAI1_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define PLLSAI2_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ +#define PLL_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ + +#define DIVIDER_P_UPDATE 0U +#define DIVIDER_Q_UPDATE 1U +#define DIVIDER_R_UPDATE 2U + +#define __LSCO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define LSCO_GPIO_PORT GPIOA +#define LSCO_PIN GPIO_PIN_2 +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCCEx_Private_Functions RCCEx Private Functions + * @{ + */ +#if defined(RCC_PLLSAI1_SUPPORT) + +static HAL_StatusTypeDef RCCEx_PLLSAI1_Config(RCC_PLLSAI1InitTypeDef *PllSai1, uint32_t Divider); + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +static HAL_StatusTypeDef RCCEx_PLLSAI2_Config(RCC_PLLSAI2InitTypeDef *PllSai2, uint32_t Divider); + +#endif /* RCC_PLLSAI2_SUPPORT */ + +#if defined(SAI1) + +static uint32_t RCCEx_GetSAIxPeriphCLKFreq(uint32_t PeriphClk, uint32_t InputFrequency); + +#endif /* SAI1 */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) are set to their reset values. + +@endverbatim + * @{ + */ +/** + * @brief Initialize the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains a field PeriphClockSelection which can be a combination of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + @if STM32L462xx + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM1) + @endif + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM1) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM1) + @endif + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock + @if STM32L462xx + * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) + @endif + @if STM32L4S9xx + * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) + @endif + * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock + * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock + * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock + * @arg @ref RCC_PERIPHCLK_SAI1 SAI1 peripheral clock (only for devices with SAI1) + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) + @endif + @if STM32L4S9xx + * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) + @endif + * @arg @ref RCC_PERIPHCLK_SDMMC1 SDMMC1 peripheral clock + @if STM32L443xx + * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) + @endif + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) + @endif + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART2 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART3 USART1 peripheral clock + @if STM32L462xx + * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) + @endif + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + @endif + @if STM32L4S9xx + * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral kernel clock (only for devices with DFSDM1) + * @arg @ref RCC_PERIPHCLK_DFSDM1AUDIO DFSDM1 peripheral audio clock (only for devices with DFSDM1) + * @arg @ref RCC_PERIPHCLK_LTDC LTDC peripheral clock (only for devices with LTDC) + * @arg @ref RCC_PERIPHCLK_DSI DSI peripheral clock (only for devices with DSI) + * @arg @ref RCC_PERIPHCLK_OSPI OctoSPI peripheral clock (only for devices with OctoSPI) + @endif + * + * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source: in this case the access to Backup domain is enabled. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tmpregister, tickstart; /* no init needed */ + HAL_StatusTypeDef ret = HAL_OK; /* Intermediate status */ + HAL_StatusTypeDef status = HAL_OK; /* Final status */ + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + +#if defined(SAI1) + + /*-------------------------- SAI1 clock source configuration ---------------------*/ + if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1)) + { + /* Check the parameters */ + assert_param(IS_RCC_SAI1CLK(PeriphClkInit->Sai1ClockSelection)); + + switch(PeriphClkInit->Sai1ClockSelection) + { + case RCC_SAI1CLKSOURCE_PLL: /* PLL is used as clock source for SAI1*/ + /* Enable SAI Clock output generated from System PLL . */ +#if defined(RCC_PLLSAI2_SUPPORT) + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); +#else + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI2CLK); +#endif /* RCC_PLLSAI2_SUPPORT */ + /* SAI1 clock source config set later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PLLSAI1: /* PLLSAI1 is used as clock source for SAI1*/ + /* PLLSAI1 input clock, parameters M, N & P configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_P_UPDATE); + /* SAI1 clock source config set later after clock selection check */ + break; + +#if defined(RCC_PLLSAI2_SUPPORT) + + case RCC_SAI1CLKSOURCE_PLLSAI2: /* PLLSAI2 is used as clock source for SAI1*/ + /* PLLSAI2 input clock, parameters M, N & P configuration clock output (PLLSAI2ClockOut) */ + ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_P_UPDATE); + /* SAI1 clock source config set later after clock selection check */ + break; + +#endif /* RCC_PLLSAI2_SUPPORT */ + + case RCC_SAI1CLKSOURCE_PIN: /* External clock is used as source of SAI1 clock*/ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + case RCC_SAI1CLKSOURCE_HSI: /* HSI is used as source of SAI1 clock*/ +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + /* SAI1 clock source config set later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if(ret == HAL_OK) + { + /* Set the source of SAI1 clock*/ + __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#endif /* SAI1 */ + +#if defined(SAI2) + + /*-------------------------- SAI2 clock source configuration ---------------------*/ + if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2)) + { + /* Check the parameters */ + assert_param(IS_RCC_SAI2CLK(PeriphClkInit->Sai2ClockSelection)); + + switch(PeriphClkInit->Sai2ClockSelection) + { + case RCC_SAI2CLKSOURCE_PLL: /* PLL is used as clock source for SAI2*/ + /* Enable SAI Clock output generated from System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); + /* SAI2 clock source config set later after clock selection check */ + break; + + case RCC_SAI2CLKSOURCE_PLLSAI1: /* PLLSAI1 is used as clock source for SAI2*/ + /* PLLSAI1 input clock, parameters M, N & P configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_P_UPDATE); + /* SAI2 clock source config set later after clock selection check */ + break; + + case RCC_SAI2CLKSOURCE_PLLSAI2: /* PLLSAI2 is used as clock source for SAI2*/ + /* PLLSAI2 input clock, parameters M, N & P configuration and clock output (PLLSAI2ClockOut) */ + ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_P_UPDATE); + /* SAI2 clock source config set later after clock selection check */ + break; + + case RCC_SAI2CLKSOURCE_PIN: /* External clock is used as source of SAI2 clock*/ +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + case RCC_SAI2CLKSOURCE_HSI: /* HSI is used as source of SAI2 clock*/ +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + /* SAI2 clock source config set later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if(ret == HAL_OK) + { + /* Set the source of SAI2 clock*/ + __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /* SAI2 */ + + /*-------------------------- RTC clock source configuration ----------------------*/ + if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) + { + FlagStatus pwrclkchanged = RESET; + + /* Check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable Power Clock */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED() != 0U) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while(READ_BIT(PWR->CR1, PWR_CR1_DBP) == 0U) + { + if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + + if(ret == HAL_OK) + { + /* Reset the Backup domain only if the RTC Clock source selection is modified from default */ + tmpregister = READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL); + + if((tmpregister != RCC_RTCCLKSOURCE_NONE) && (tmpregister != PeriphClkInit->RTCClockSelection)) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpregister = READ_BIT(RCC->BDCR, ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpregister; + } + + /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ + if (HAL_IS_BIT_SET(tmpregister, RCC_BDCR_LSEON)) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == 0U) + { + if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + } + + if(ret == HAL_OK) + { + /* Apply new RTC clock source selection */ + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + else + { + /* set overall return value */ + status = ret; + } + + /* Restore clock configuration if changed */ + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } + } + + /*-------------------------- USART1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) + { + /* Check the parameters */ + assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); + + /* Configure the USART1 clock source */ + __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); + } + + /*-------------------------- USART2 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) + { + /* Check the parameters */ + assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection)); + + /* Configure the USART2 clock source */ + __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection); + } + +#if defined(USART3) + + /*-------------------------- USART3 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) + { + /* Check the parameters */ + assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection)); + + /* Configure the USART3 clock source */ + __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); + } + +#endif /* USART3 */ + +#if defined(UART4) + + /*-------------------------- UART4 clock source configuration --------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) + { + /* Check the parameters */ + assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection)); + + /* Configure the UART4 clock source */ + __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection); + } + +#endif /* UART4 */ + +#if defined(UART5) + + /*-------------------------- UART5 clock source configuration --------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) + { + /* Check the parameters */ + assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection)); + + /* Configure the UART5 clock source */ + __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection); + } + +#endif /* UART5 */ + + /*-------------------------- LPUART1 clock source configuration ------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) + { + /* Check the parameters */ + assert_param(IS_RCC_LPUART1CLKSOURCE(PeriphClkInit->Lpuart1ClockSelection)); + + /* Configure the LPUART1 clock source */ + __HAL_RCC_LPUART1_CONFIG(PeriphClkInit->Lpuart1ClockSelection); + } + + /*-------------------------- LPTIM1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == (RCC_PERIPHCLK_LPTIM1)) + { + assert_param(IS_RCC_LPTIM1CLK(PeriphClkInit->Lptim1ClockSelection)); + __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); + } + + /*-------------------------- LPTIM2 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM2) == (RCC_PERIPHCLK_LPTIM2)) + { + assert_param(IS_RCC_LPTIM2CLK(PeriphClkInit->Lptim2ClockSelection)); + __HAL_RCC_LPTIM2_CONFIG(PeriphClkInit->Lptim2ClockSelection); + } + + /*-------------------------- I2C1 clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); + + /* Configure the I2C1 clock source */ + __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); + } + +#if defined(I2C2) + + /*-------------------------- I2C2 clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection)); + + /* Configure the I2C2 clock source */ + __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection); + } + +#endif /* I2C2 */ + + /*-------------------------- I2C3 clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection)); + + /* Configure the I2C3 clock source */ + __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection); + } + +#if defined(I2C4) + + /*-------------------------- I2C4 clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C4CLKSOURCE(PeriphClkInit->I2c4ClockSelection)); + + /* Configure the I2C4 clock source */ + __HAL_RCC_I2C4_CONFIG(PeriphClkInit->I2c4ClockSelection); + } + +#endif /* I2C4 */ + +#if defined(USB_OTG_FS) || defined(USB) + + /*-------------------------- USB clock source configuration ----------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == (RCC_PERIPHCLK_USB)) + { + assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->UsbClockSelection)); + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + + if(PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLL) + { + /* Enable PLL48M1CLK output clock */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); + } + else + { +#if defined(RCC_PLLSAI1_SUPPORT) + if(PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLLSAI1) + { + /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } +#endif /* RCC_PLLSAI1_SUPPORT */ + } + } + +#endif /* USB_OTG_FS || USB */ + +#if defined(SDMMC1) + + /*-------------------------- SDMMC1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC1) == (RCC_PERIPHCLK_SDMMC1)) + { + assert_param(IS_RCC_SDMMC1CLKSOURCE(PeriphClkInit->Sdmmc1ClockSelection)); + __HAL_RCC_SDMMC1_CONFIG(PeriphClkInit->Sdmmc1ClockSelection); + + if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLL) /* PLL "Q" ? */ + { + /* Enable PLL48M1CLK output clock */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); + } +#if defined(RCC_CCIPR2_SDMMCSEL) + else if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLLP) /* PLL "P" ? */ + { + /* Enable PLLSAI3CLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); + } +#endif + else if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLLSAI1) + { + /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } + else + { + /* nothing to do */ + } + } + +#endif /* SDMMC1 */ + + /*-------------------------- RNG clock source configuration ----------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RNG) == (RCC_PERIPHCLK_RNG)) + { + assert_param(IS_RCC_RNGCLKSOURCE(PeriphClkInit->RngClockSelection)); + __HAL_RCC_RNG_CONFIG(PeriphClkInit->RngClockSelection); + + if(PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLL) + { + /* Enable PLL48M1CLK output clock */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); + } +#if defined(RCC_PLLSAI1_SUPPORT) + else if(PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLLSAI1) + { + /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } +#endif /* RCC_PLLSAI1_SUPPORT */ + else + { + /* nothing to do */ + } + } + + /*-------------------------- ADC clock source configuration ----------------------*/ +#if !defined(STM32L412xx) && !defined(STM32L422xx) + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + { + /* Check the parameters */ + assert_param(IS_RCC_ADCCLKSOURCE(PeriphClkInit->AdcClockSelection)); + + /* Configure the ADC interface clock source */ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + +#if defined(RCC_PLLSAI1_SUPPORT) + if(PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLSAI1) + { + /* PLLSAI1 input clock, parameters M, N & R configuration and clock output (PLLSAI1ClockOut) */ + ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_R_UPDATE); + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) + + else if(PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLSAI2) + { + /* PLLSAI2 input clock, parameters M, N & R configuration and clock output (PLLSAI2ClockOut) */ + ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_R_UPDATE); + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } + else + { + /* nothing to do */ + } + +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ + + } +#endif /* !STM32L412xx && !STM32L422xx */ + +#if defined(SWPMI1) + + /*-------------------------- SWPMI1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SWPMI1) == RCC_PERIPHCLK_SWPMI1) + { + /* Check the parameters */ + assert_param(IS_RCC_SWPMI1CLKSOURCE(PeriphClkInit->Swpmi1ClockSelection)); + + /* Configure the SWPMI1 clock source */ + __HAL_RCC_SWPMI1_CONFIG(PeriphClkInit->Swpmi1ClockSelection); + } + +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Filter0) + + /*-------------------------- DFSDM1 clock source configuration -------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection)); + + /* Configure the DFSDM1 interface clock source */ + __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection); + } + +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + /*-------------------------- DFSDM1 audio clock source configuration -------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1AUDIO) == RCC_PERIPHCLK_DFSDM1AUDIO) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM1AUDIOCLKSOURCE(PeriphClkInit->Dfsdm1AudioClockSelection)); + + /* Configure the DFSDM1 interface audio clock source */ + __HAL_RCC_DFSDM1AUDIO_CONFIG(PeriphClkInit->Dfsdm1AudioClockSelection); + } + +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) + + /*-------------------------- LTDC clock source configuration --------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) + { + /* Check the parameters */ + assert_param(IS_RCC_LTDCCLKSOURCE(PeriphClkInit->LtdcClockSelection)); + + /* Disable the PLLSAI2 */ + __HAL_RCC_PLLSAI2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI2 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + + if(ret == HAL_OK) + { + /* Configure the LTDC clock source */ + __HAL_RCC_LTDC_CONFIG(PeriphClkInit->LtdcClockSelection); + + /* PLLSAI2 input clock, parameters M, N & R configuration and clock output (PLLSAI2ClockOut) */ + ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_R_UPDATE); + } + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } + +#endif /* LTDC */ + +#if defined(DSI) + + /*-------------------------- DSI clock source configuration ---------------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DSI) == RCC_PERIPHCLK_DSI) + { + /* Check the parameters */ + assert_param(IS_RCC_DSICLKSOURCE(PeriphClkInit->DsiClockSelection)); + + /* Configure the DSI clock source */ + __HAL_RCC_DSI_CONFIG(PeriphClkInit->DsiClockSelection); + + if(PeriphClkInit->DsiClockSelection == RCC_DSICLKSOURCE_PLLSAI2) + { + /* PLLSAI2 input clock, parameters M, N & Q configuration and clock output (PLLSAI2ClockOut) */ + ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_Q_UPDATE); + + if(ret != HAL_OK) + { + /* set overall return value */ + status = ret; + } + } + } + +#endif /* DSI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + + /*-------------------------- OctoSPIx clock source configuration ----------------*/ + if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_OSPI) == RCC_PERIPHCLK_OSPI) + { + /* Check the parameters */ + assert_param(IS_RCC_OSPICLKSOURCE(PeriphClkInit->OspiClockSelection)); + + /* Configure the OctoSPI clock source */ + __HAL_RCC_OSPI_CONFIG(PeriphClkInit->OspiClockSelection); + + if(PeriphClkInit->OspiClockSelection == RCC_OSPICLKSOURCE_PLL) + { + /* Enable PLL48M1CLK output */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); + } + } + +#endif /* OCTOSPI1 || OCTOSPI2 */ + + return status; +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals + * clocks(SAI1, SAI2, LPTIM1, LPTIM2, I2C1, I2C2, I2C3, I2C4, LPUART1, + * USART1, USART2, USART3, UART4, UART5, RTC, ADCx, DFSDMx, SWPMI1, USB, SDMMC1 and RNG). + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + +#if defined(STM32L412xx) || defined(STM32L422xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_RNG | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L431xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L432xx) || defined(STM32L442xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L433xx) || defined(STM32L443xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L451xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L452xx) || defined(STM32L462xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L471xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L496xx) || defined(STM32L4A6xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_RTC ; + +#elif defined(STM32L4R5xx) || defined(STM32L4S5xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_DFSDM1AUDIO | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_OSPI; + +#elif defined(STM32L4R7xx) || defined(STM32L4S7xx) || defined(STM32L4Q5xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_DFSDM1AUDIO | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC; + +#elif defined(STM32L4R9xx) || defined(STM32L4S9xx) + + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ + RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ + RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ + RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ + RCC_PERIPHCLK_DFSDM1AUDIO | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_DSI; + +#endif /* STM32L431xx */ + +#if defined(RCC_PLLSAI1_SUPPORT) + + /* Get the PLLSAI1 Clock configuration -----------------------------------------------*/ + + PeriphClkInit->PLLSAI1.PLLSAI1Source = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC) >> RCC_PLLCFGR_PLLSRC_Pos; +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + PeriphClkInit->PLLSAI1.PLLSAI1M = (READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U; +#else + PeriphClkInit->PLLSAI1.PLLSAI1M = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U; +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + PeriphClkInit->PLLSAI1.PLLSAI1N = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; + PeriphClkInit->PLLSAI1.PLLSAI1P = ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P) >> RCC_PLLSAI1CFGR_PLLSAI1P_Pos) << 4U) + 7U; + PeriphClkInit->PLLSAI1.PLLSAI1Q = ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) * 2U; + PeriphClkInit->PLLSAI1.PLLSAI1R = ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) * 2U; + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + + /* Get the PLLSAI2 Clock configuration -----------------------------------------------*/ + + PeriphClkInit->PLLSAI2.PLLSAI2Source = PeriphClkInit->PLLSAI1.PLLSAI1Source; +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + PeriphClkInit->PLLSAI2.PLLSAI2M = (READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U; +#else + PeriphClkInit->PLLSAI2.PLLSAI2M = PeriphClkInit->PLLSAI1.PLLSAI1M; +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + PeriphClkInit->PLLSAI2.PLLSAI2N = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos; + PeriphClkInit->PLLSAI2.PLLSAI2P = ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P) >> RCC_PLLSAI2CFGR_PLLSAI2P_Pos) << 4U) + 7U; +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) + PeriphClkInit->PLLSAI2.PLLSAI2Q = ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2Q) >> RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) + 1U) * 2U; +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ + PeriphClkInit->PLLSAI2.PLLSAI2R = ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R)>> RCC_PLLSAI2CFGR_PLLSAI2R_Pos) + 1U) * 2U; + +#endif /* RCC_PLLSAI2_SUPPORT */ + + /* Get the USART1 clock source ---------------------------------------------*/ + PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); + /* Get the USART2 clock source ---------------------------------------------*/ + PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE(); + +#if defined(USART3) + /* Get the USART3 clock source ---------------------------------------------*/ + PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE(); +#endif /* USART3 */ + +#if defined(UART4) + /* Get the UART4 clock source ----------------------------------------------*/ + PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE(); +#endif /* UART4 */ + +#if defined(UART5) + /* Get the UART5 clock source ----------------------------------------------*/ + PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE(); +#endif /* UART5 */ + + /* Get the LPUART1 clock source --------------------------------------------*/ + PeriphClkInit->Lpuart1ClockSelection = __HAL_RCC_GET_LPUART1_SOURCE(); + + /* Get the I2C1 clock source -----------------------------------------------*/ + PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); + +#if defined(I2C2) + /* Get the I2C2 clock source ----------------------------------------------*/ + PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE(); +#endif /* I2C2 */ + + /* Get the I2C3 clock source -----------------------------------------------*/ + PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE(); + +#if defined(I2C4) + /* Get the I2C4 clock source -----------------------------------------------*/ + PeriphClkInit->I2c4ClockSelection = __HAL_RCC_GET_I2C4_SOURCE(); +#endif /* I2C4 */ + + /* Get the LPTIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); + + /* Get the LPTIM2 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim2ClockSelection = __HAL_RCC_GET_LPTIM2_SOURCE(); + +#if defined(SAI1) + /* Get the SAI1 clock source -----------------------------------------------*/ + PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); +#endif /* SAI1 */ + +#if defined(SAI2) + /* Get the SAI2 clock source -----------------------------------------------*/ + PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE(); +#endif /* SAI2 */ + + /* Get the RTC clock source ------------------------------------------------*/ + PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); + +#if defined(USB_OTG_FS) || defined(USB) + /* Get the USB clock source ------------------------------------------------*/ + PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); +#endif /* USB_OTG_FS || USB */ + +#if defined(SDMMC1) + /* Get the SDMMC1 clock source ---------------------------------------------*/ + PeriphClkInit->Sdmmc1ClockSelection = __HAL_RCC_GET_SDMMC1_SOURCE(); +#endif /* SDMMC1 */ + + /* Get the RNG clock source ------------------------------------------------*/ + PeriphClkInit->RngClockSelection = __HAL_RCC_GET_RNG_SOURCE(); + +#if !defined(STM32L412xx) && !defined(STM32L422xx) + /* Get the ADC clock source ------------------------------------------------*/ + PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); +#endif /* !STM32L412xx && !STM32L422xx */ + +#if defined(SWPMI1) + /* Get the SWPMI1 clock source ---------------------------------------------*/ + PeriphClkInit->Swpmi1ClockSelection = __HAL_RCC_GET_SWPMI1_SOURCE(); +#endif /* SWPMI1 */ + +#if defined(DFSDM1_Filter0) + /* Get the DFSDM1 clock source ---------------------------------------------*/ + PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE(); + +#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + /* Get the DFSDM1 audio clock source ---------------------------------------*/ + PeriphClkInit->Dfsdm1AudioClockSelection = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE(); +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +#endif /* DFSDM1_Filter0 */ + +#if defined(LTDC) + /* Get the LTDC clock source -----------------------------------------------*/ + PeriphClkInit->LtdcClockSelection = __HAL_RCC_GET_LTDC_SOURCE(); +#endif /* LTDC */ + +#if defined(DSI) + /* Get the DSI clock source ------------------------------------------------*/ + PeriphClkInit->DsiClockSelection = __HAL_RCC_GET_DSI_SOURCE(); +#endif /* DSI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + /* Get the OctoSPIclock source --------------------------------------------*/ + PeriphClkInit->OspiClockSelection = __HAL_RCC_GET_OSPI_SOURCE(); +#endif /* OCTOSPI1 || OCTOSPI2 */ +} + +/** + * @brief Return the peripheral clock frequency for peripherals with clock source from PLLSAIs + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock + * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock + @if STM32L462xx + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM) + @endif + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM) + @endif + * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock + * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock + @if STM32L462xx + * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) + @endif + @if STM32L4S9xx + * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) + @endif + * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock + * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock + * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock + * @arg @ref RCC_PERIPHCLK_SAI1 SAI1 peripheral clock (only for devices with SAI1) + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) + @endif + @if STM32L4S9xx + * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) + @endif + * @arg @ref RCC_PERIPHCLK_SDMMC1 SDMMC1 peripheral clock + @if STM32L443xx + * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) + @endif + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) + @endif + * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART2 USART1 peripheral clock + * @arg @ref RCC_PERIPHCLK_USART3 USART1 peripheral clock + @if STM32L462xx + * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + @endif + @if STM32L486xx + * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock (only for devices with UART5) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + @endif + @if STM32L4A6xx + * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock (only for devices with UART5) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + @endif + @if STM32L4S9xx + * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) + * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) + * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) + * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral kernel clock (only for devices with DFSDM1) + * @arg @ref RCC_PERIPHCLK_DFSDM1AUDIO DFSDM1 peripheral audio clock (only for devices with DFSDM1) + * @arg @ref RCC_PERIPHCLK_LTDC LTDC peripheral clock (only for devices with LTDC) + * @arg @ref RCC_PERIPHCLK_DSI DSI peripheral clock (only for devices with DSI) + * @arg @ref RCC_PERIPHCLK_OSPI OctoSPI peripheral clock (only for devices with OctoSPI) + @endif + * @retval Frequency in Hz + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + uint32_t frequency = 0U; + uint32_t srcclk, pll_oscsource, pllvco, plln; /* no init needed */ +#if defined(SDMMC1) && defined(RCC_CCIPR2_SDMMCSEL) + uint32_t pllp; /* no init needed */ +#endif + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); + + if(PeriphClk == RCC_PERIPHCLK_RTC) + { + /* Get the current RTC source */ + srcclk = __HAL_RCC_GET_RTC_SOURCE(); + + switch(srcclk) + { + case RCC_RTCCLKSOURCE_LSE: + /* Check if LSE is ready */ + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + case RCC_RTCCLKSOURCE_LSI: + /* Check if LSI is ready */ + if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) + { +#if defined(RCC_CSR_LSIPREDIV) + if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIPREDIV)) + { + frequency = LSI_VALUE/128U; + } + else +#endif /* RCC_CSR_LSIPREDIV */ + { + frequency = LSI_VALUE; + } + } + break; + case RCC_RTCCLKSOURCE_HSE_DIV32: + /* Check if HSE is ready */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + frequency = HSE_VALUE / 32U; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + } + else + { + /* Other external peripheral clock source than RTC */ + pll_oscsource = __HAL_RCC_GET_PLL_OSCSOURCE(); + + /* Compute PLL clock input */ + switch(pll_oscsource) + { + case RCC_PLLSOURCE_MSI: /* MSI ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) + { + /*MSI frequency range in HZ*/ + pllvco = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; + } + else + { + pllvco = 0U; + } + break; + case RCC_PLLSOURCE_HSI: /* HSI ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + pllvco = HSI_VALUE; + } + else + { + pllvco = 0U; + } + break; + case RCC_PLLSOURCE_HSE: /* HSE ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + pllvco = HSE_VALUE; + } + else + { + pllvco = 0U; + } + break; + default: + /* No source */ + pllvco = 0U; + break; + } + + switch(PeriphClk) + { +#if defined(SAI1) + + case RCC_PERIPHCLK_SAI1: + frequency = RCCEx_GetSAIxPeriphCLKFreq(RCC_PERIPHCLK_SAI1, pllvco); + break; + +#endif + +#if defined(SAI2) + + case RCC_PERIPHCLK_SAI2: + frequency = RCCEx_GetSAIxPeriphCLKFreq(RCC_PERIPHCLK_SAI2, pllvco); + break; + +#endif + +#if defined(USB_OTG_FS) || defined(USB) + + case RCC_PERIPHCLK_USB: + +#endif /* USB_OTG_FS || USB */ + + case RCC_PERIPHCLK_RNG: + +#if defined(SDMMC1) && !defined(RCC_CCIPR2_SDMMCSEL) + + case RCC_PERIPHCLK_SDMMC1: + +#endif /* SDMMC1 && !RCC_CCIPR2_SDMMCSEL */ + { + srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL); + + switch(srcclk) + { + case RCC_CCIPR_CLK48SEL: /* MSI ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) + { + /*MSI frequency range in HZ*/ + frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; + } + break; + case RCC_CCIPR_CLK48SEL_1: /* PLL ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)) + { + if(HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN)) + { + /* f(PLL Source) * PLLN / PLLM */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + /* f(PLL48M1CLK) = f(VCO input) / PLLQ */ + frequency = (pllvco / (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U)); + } + } + break; +#if defined(RCC_PLLSAI1_SUPPORT) + case RCC_CCIPR_CLK48SEL_0: /* PLLSAI1 ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY)) + { + if(HAL_IS_BIT_SET(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN)) + { + plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* PLLSAI1M exists: apply PLLSAI1M divider for PLLSAI1 output computation */ + /* f(PLLSAI1 Source) * PLLSAI1N / PLLSAI1M */ + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); +#else + /* f(PLL Source) * PLLSAI1N / PLLM */ + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); +#endif + /* f(PLL48M2CLK) = f(VCOSAI1 input) / PLLSAI1Q */ + frequency = (pllvco / (((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U)); + } + } + break; +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(RCC_HSI48_SUPPORT) + case 0U: + if(HAL_IS_BIT_SET(RCC->CRRCR, RCC_CRRCR_HSI48RDY)) /* HSI48 ? */ + { + frequency = HSI48_VALUE; + } + break; +#endif /* RCC_HSI48_SUPPORT */ + default: + /* No clock source, frequency default init at 0 */ + break; + } /* switch(srcclk) */ + break; + } + +#if defined(SDMMC1) && defined(RCC_CCIPR2_SDMMCSEL) + + case RCC_PERIPHCLK_SDMMC1: + + if(HAL_IS_BIT_SET(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL)) /* PLL "P" ? */ + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)) + { + if(HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN)) + { + /* f(PLL Source) * PLLN / PLLM */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + /* f(PLLSAI3CLK) = f(VCO input) / PLLP */ + pllp = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; + if(pllp == 0U) + { + if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != 0U) + { + pllp = 17U; + } + else + { + pllp = 7U; + } + } + frequency = (pllvco / pllp); + } + } + } + else /* 48MHz from PLL "Q" or MSI or PLLSAI1Q or HSI48 */ + { + srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL); + + switch(srcclk) + { + case RCC_CCIPR_CLK48SEL: /* MSI ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) + { + /*MSI frequency range in HZ*/ + frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; + } + break; + case RCC_CCIPR_CLK48SEL_1: /* PLL "Q" ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)) + { + if(HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN)) + { + /* f(PLL Source) * PLLN / PLLM */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + /* f(PLL48M1CLK) = f(VCO input) / PLLQ */ + frequency = (pllvco / (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U)); + } + } + break; + case RCC_CCIPR_CLK48SEL_0: /* PLLSAI1 ? */ + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY)) + { + if(HAL_IS_BIT_SET(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN)) + { + /* f(PLLSAI1 Source) * PLLSAI1N / PLLSAI1M */ + plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); + /* f(PLL48M2CLK) = f(VCOSAI1 input) / PLLSAI1Q */ + frequency = (pllvco / (((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U)); + } + } + break; + case 0U: + if(HAL_IS_BIT_SET(RCC->CRRCR, RCC_CRRCR_HSI48RDY)) /* HSI48 ? */ + { + frequency = HSI48_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } /* switch(srcclk) */ + } + break; + +#endif /* SDMMC1 && RCC_CCIPR2_SDMMCSEL */ + + case RCC_PERIPHCLK_USART1: + { + /* Get the current USART1 source */ + srcclk = __HAL_RCC_GET_USART1_SOURCE(); + + switch(srcclk) + { + case RCC_USART1CLKSOURCE_PCLK2: + frequency = HAL_RCC_GetPCLK2Freq(); + break; + case RCC_USART1CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_USART1CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_USART1CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + + case RCC_PERIPHCLK_USART2: + { + /* Get the current USART2 source */ + srcclk = __HAL_RCC_GET_USART2_SOURCE(); + + switch(srcclk) + { + case RCC_USART2CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_USART2CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_USART2CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_USART2CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#if defined(USART3) + + case RCC_PERIPHCLK_USART3: + { + /* Get the current USART3 source */ + srcclk = __HAL_RCC_GET_USART3_SOURCE(); + + switch(srcclk) + { + case RCC_USART3CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_USART3CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_USART3CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_USART3CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* USART3 */ + +#if defined(UART4) + + case RCC_PERIPHCLK_UART4: + { + /* Get the current UART4 source */ + srcclk = __HAL_RCC_GET_UART4_SOURCE(); + + switch(srcclk) + { + case RCC_UART4CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_UART4CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_UART4CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_UART4CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* UART4 */ + +#if defined(UART5) + + case RCC_PERIPHCLK_UART5: + { + /* Get the current UART5 source */ + srcclk = __HAL_RCC_GET_UART5_SOURCE(); + + switch(srcclk) + { + case RCC_UART5CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_UART5CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_UART5CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_UART5CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* UART5 */ + + case RCC_PERIPHCLK_LPUART1: + { + /* Get the current LPUART1 source */ + srcclk = __HAL_RCC_GET_LPUART1_SOURCE(); + + switch(srcclk) + { + case RCC_LPUART1CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_LPUART1CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_LPUART1CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_LPUART1CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + + case RCC_PERIPHCLK_ADC: + { + srcclk = __HAL_RCC_GET_ADC_SOURCE(); + + switch(srcclk) + { + case RCC_ADCCLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; +#if defined(RCC_PLLSAI1_SUPPORT) + case RCC_ADCCLKSOURCE_PLLSAI1: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY) && (__HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(RCC_PLLSAI1_ADC1CLK) != 0U)) + { + plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* PLLSAI1M exists: apply PLLSAI1M divider for PLLSAI1 output computation */ + /* f(PLLSAI1 Source) * PLLSAI1N / PLLSAI1M */ + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); +#else + /* f(PLL Source) * PLLSAI1N / PLLM */ + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); +#endif + /* f(PLLADC1CLK) = f(VCOSAI1 input) / PLLSAI1R */ + frequency = (pllvco / (((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) << 1U)); + } + break; +#endif /* RCC_PLLSAI1_SUPPORT */ +#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) + case RCC_ADCCLKSOURCE_PLLSAI2: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI2RDY) && (__HAL_RCC_GET_PLLSAI2CLKOUT_CONFIG(RCC_PLLSAI2_ADC2CLK) != 0U)) + { + plln = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos; +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + /* PLLSAI2M exists: apply PLLSAI2M divider for PLLSAI2 output computation */ + /* f(PLLSAI2 Source) * PLLSAI2N / PLLSAI2M */ + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)); +#else + /* f(PLL Source) * PLLSAI2N / PLLM */ + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); +#endif + /* f(PLLADC2CLK) = f(VCOSAI2 input) / PLLSAI2R */ + frequency = (pllvco / (((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R) >> RCC_PLLSAI2CFGR_PLLSAI2R_Pos) + 1U) << 1U)); + } + break; +#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#if defined(DFSDM1_Filter0) + + case RCC_PERIPHCLK_DFSDM1: + { + /* Get the current DFSDM1 source */ + srcclk = __HAL_RCC_GET_DFSDM1_SOURCE(); + + if(srcclk == RCC_DFSDM1CLKSOURCE_PCLK2) + { + frequency = HAL_RCC_GetPCLK2Freq(); + } + else + { + frequency = HAL_RCC_GetSysClockFreq(); + } + + break; + } + +#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + + case RCC_PERIPHCLK_DFSDM1AUDIO: + { + /* Get the current DFSDM1 audio source */ + srcclk = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE(); + + switch(srcclk) + { + case RCC_DFSDM1AUDIOCLKSOURCE_SAI1: + frequency = RCCEx_GetSAIxPeriphCLKFreq(RCC_PERIPHCLK_SAI1, pllvco); + break; + case RCC_DFSDM1AUDIOCLKSOURCE_MSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) + { + /*MSI frequency range in HZ*/ + frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; + } + break; + case RCC_DFSDM1AUDIOCLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#endif /* DFSDM1_Filter0 */ + + case RCC_PERIPHCLK_I2C1: + { + /* Get the current I2C1 source */ + srcclk = __HAL_RCC_GET_I2C1_SOURCE(); + + switch(srcclk) + { + case RCC_I2C1CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_I2C1CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_I2C1CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#if defined(I2C2) + + case RCC_PERIPHCLK_I2C2: + { + /* Get the current I2C2 source */ + srcclk = __HAL_RCC_GET_I2C2_SOURCE(); + + switch(srcclk) + { + case RCC_I2C2CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_I2C2CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_I2C2CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* I2C2 */ + + case RCC_PERIPHCLK_I2C3: + { + /* Get the current I2C3 source */ + srcclk = __HAL_RCC_GET_I2C3_SOURCE(); + + switch(srcclk) + { + case RCC_I2C3CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_I2C3CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_I2C3CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#if defined(I2C4) + + case RCC_PERIPHCLK_I2C4: + { + /* Get the current I2C4 source */ + srcclk = __HAL_RCC_GET_I2C4_SOURCE(); + + switch(srcclk) + { + case RCC_I2C4CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_I2C4CLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_I2C4CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* I2C4 */ + + case RCC_PERIPHCLK_LPTIM1: + { + /* Get the current LPTIM1 source */ + srcclk = __HAL_RCC_GET_LPTIM1_SOURCE(); + + switch(srcclk) + { + case RCC_LPTIM1CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_LPTIM1CLKSOURCE_LSI: + if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) + { +#if defined(RCC_CSR_LSIPREDIV) + if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIPREDIV)) + { + frequency = LSI_VALUE/128U; + } + else +#endif /* RCC_CSR_LSIPREDIV */ + { + frequency = LSI_VALUE; + } + } + break; + case RCC_LPTIM1CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_LPTIM1CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + + case RCC_PERIPHCLK_LPTIM2: + { + /* Get the current LPTIM2 source */ + srcclk = __HAL_RCC_GET_LPTIM2_SOURCE(); + + switch(srcclk) + { + case RCC_LPTIM2CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_LPTIM2CLKSOURCE_LSI: + if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)) + { +#if defined(RCC_CSR_LSIPREDIV) + if(HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIPREDIV)) + { + frequency = LSI_VALUE/128U; + } + else +#endif /* RCC_CSR_LSIPREDIV */ + { + frequency = LSI_VALUE; + } + } + break; + case RCC_LPTIM2CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + case RCC_LPTIM2CLKSOURCE_LSE: + if(HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY)) + { + frequency = LSE_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#if defined(SWPMI1) + + case RCC_PERIPHCLK_SWPMI1: + { + /* Get the current SWPMI1 source */ + srcclk = __HAL_RCC_GET_SWPMI1_SOURCE(); + + switch(srcclk) + { + case RCC_SWPMI1CLKSOURCE_PCLK1: + frequency = HAL_RCC_GetPCLK1Freq(); + break; + case RCC_SWPMI1CLKSOURCE_HSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* SWPMI1 */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + + case RCC_PERIPHCLK_OSPI: + { + /* Get the current OctoSPI clock source */ + srcclk = __HAL_RCC_GET_OSPI_SOURCE(); + + switch(srcclk) + { + case RCC_OSPICLKSOURCE_SYSCLK: + frequency = HAL_RCC_GetSysClockFreq(); + break; + case RCC_OSPICLKSOURCE_MSI: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) + { + /*MSI frequency range in HZ*/ + frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; + } + break; + case RCC_OSPICLKSOURCE_PLL: + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY)) + { + if(HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN)) + { + /* f(PLL Source) * PLLN / PLLM */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; + pllvco = ((pllvco * plln) / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + /* f(PLL48M1CLK) = f(VCO input) / PLLQ */ + frequency = (pllvco / (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U)); + } + } + break; + default: + /* No clock source, frequency default init at 0 */ + break; + } + + break; + } + +#endif /* OCTOSPI1 || OCTOSPI2 */ + + default: + break; + } + } + + return(frequency); +} + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions + * @brief Extended Clock management functions + * +@verbatim + =============================================================================== + ##### Extended clock management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the + activation or deactivation of MSI PLL-mode, PLLSAI1, PLLSAI2, LSE CSS, + Low speed clock output and clock after wake-up from STOP mode. +@endverbatim + * @{ + */ + +#if defined(RCC_PLLSAI1_SUPPORT) + +/** + * @brief Enable PLLSAI1. + * @param PLLSAI1Init pointer to an RCC_PLLSAI1InitTypeDef structure that + * contains the configuration information for the PLLSAI1 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI1(RCC_PLLSAI1InitTypeDef *PLLSAI1Init) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* check for PLLSAI1 Parameters used to output PLLSAI1CLK */ + assert_param(IS_RCC_PLLSAI1SOURCE(PLLSAI1Init->PLLSAI1Source)); + assert_param(IS_RCC_PLLSAI1M_VALUE(PLLSAI1Init->PLLSAI1M)); + assert_param(IS_RCC_PLLSAI1N_VALUE(PLLSAI1Init->PLLSAI1N)); + assert_param(IS_RCC_PLLSAI1P_VALUE(PLLSAI1Init->PLLSAI1P)); + assert_param(IS_RCC_PLLSAI1Q_VALUE(PLLSAI1Init->PLLSAI1Q)); + assert_param(IS_RCC_PLLSAI1R_VALUE(PLLSAI1Init->PLLSAI1R)); + assert_param(IS_RCC_PLLSAI1CLOCKOUT_VALUE(PLLSAI1Init->PLLSAI1ClockOut)); + + /* Disable the PLLSAI1 */ + __HAL_RCC_PLLSAI1_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI1 is ready to be updated */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* Configure the PLLSAI1 Multiplication factor N */ + /* Configure the PLLSAI1 Division factors M, P, Q and R */ + __HAL_RCC_PLLSAI1_CONFIG(PLLSAI1Init->PLLSAI1M, PLLSAI1Init->PLLSAI1N, PLLSAI1Init->PLLSAI1P, PLLSAI1Init->PLLSAI1Q, PLLSAI1Init->PLLSAI1R); +#else + /* Configure the PLLSAI1 Multiplication factor N */ + /* Configure the PLLSAI1 Division factors P, Q and R */ + __HAL_RCC_PLLSAI1_CONFIG(PLLSAI1Init->PLLSAI1N, PLLSAI1Init->PLLSAI1P, PLLSAI1Init->PLLSAI1Q, PLLSAI1Init->PLLSAI1R); +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + /* Configure the PLLSAI1 Clock output(s) */ + __HAL_RCC_PLLSAI1CLKOUT_ENABLE(PLLSAI1Init->PLLSAI1ClockOut); + + /* Enable the PLLSAI1 again by setting PLLSAI1ON to 1*/ + __HAL_RCC_PLLSAI1_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI1 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + } + + return status; +} + +/** + * @brief Disable PLLSAI1. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI1(void) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* Disable the PLLSAI1 */ + __HAL_RCC_PLLSAI1_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI1 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + /* Disable the PLLSAI1 Clock outputs */ + __HAL_RCC_PLLSAI1CLKOUT_DISABLE(RCC_PLLSAI1CFGR_PLLSAI1PEN|RCC_PLLSAI1CFGR_PLLSAI1QEN|RCC_PLLSAI1CFGR_PLLSAI1REN); + + /* Reset PLL source to save power if no PLLs on */ +#if defined(RCC_PLLSAI2_SUPPORT) + if(READ_BIT(RCC->CR, (RCC_CR_PLLRDY | RCC_CR_PLLSAI2RDY)) == 0U) + { + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, RCC_PLLSOURCE_NONE); + } +#else + if(READ_BIT(RCC->CR, RCC_CR_PLLRDY) == 0U) + { + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, RCC_PLLSOURCE_NONE); + } +#endif /* RCC_PLLSAI2_SUPPORT */ + + return status; +} + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +/** + * @brief Enable PLLSAI2. + * @param PLLSAI2Init pointer to an RCC_PLLSAI2InitTypeDef structure that + * contains the configuration information for the PLLSAI2 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI2(RCC_PLLSAI2InitTypeDef *PLLSAI2Init) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* check for PLLSAI2 Parameters used to output PLLSAI2CLK */ + assert_param(IS_RCC_PLLSAI2SOURCE(PLLSAI2Init->PLLSAI2Source)); + assert_param(IS_RCC_PLLSAI2M_VALUE(PLLSAI2Init->PLLSAI2M)); + assert_param(IS_RCC_PLLSAI2N_VALUE(PLLSAI2Init->PLLSAI2N)); + assert_param(IS_RCC_PLLSAI2P_VALUE(PLLSAI2Init->PLLSAI2P)); +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) + assert_param(IS_RCC_PLLSAI2Q_VALUE(PLLSAI2Init->PLLSAI2Q)); +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ + assert_param(IS_RCC_PLLSAI2R_VALUE(PLLSAI2Init->PLLSAI2R)); + assert_param(IS_RCC_PLLSAI2CLOCKOUT_VALUE(PLLSAI2Init->PLLSAI2ClockOut)); + + /* Disable the PLLSAI2 */ + __HAL_RCC_PLLSAI2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI2 is ready to be updated */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI2Q_DIV_SUPPORT) + /* Configure the PLLSAI2 Multiplication factor N */ + /* Configure the PLLSAI2 Division factors M, P, Q and R */ + __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2M, PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2Q, PLLSAI2Init->PLLSAI2R); +#elif defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + /* Configure the PLLSAI2 Multiplication factor N */ + /* Configure the PLLSAI2 Division factors M, P and R */ + __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2M, PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2R); +#elif defined(RCC_PLLSAI2Q_DIV_SUPPORT) + /* Configure the PLLSAI2 Multiplication factor N */ + /* Configure the PLLSAI2 Division factors P, Q and R */ + __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2Q, PLLSAI2Init->PLLSAI2R); +#else + /* Configure the PLLSAI2 Multiplication factor N */ + /* Configure the PLLSAI2 Division factors P and R */ + __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2R); +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ + /* Configure the PLLSAI2 Clock output(s) */ + __HAL_RCC_PLLSAI2CLKOUT_ENABLE(PLLSAI2Init->PLLSAI2ClockOut); + + /* Enable the PLLSAI2 again by setting PLLSAI2ON to 1*/ + __HAL_RCC_PLLSAI2_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI2 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + } + + return status; +} + +/** + * @brief Disable PLLISAI2. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI2(void) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* Disable the PLLSAI2 */ + __HAL_RCC_PLLSAI2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI2 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + /* Disable the PLLSAI2 Clock outputs */ +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) + __HAL_RCC_PLLSAI2CLKOUT_DISABLE(RCC_PLLSAI2CFGR_PLLSAI2PEN|RCC_PLLSAI2CFGR_PLLSAI2QEN|RCC_PLLSAI2CFGR_PLLSAI2REN); +#else + __HAL_RCC_PLLSAI2CLKOUT_DISABLE(RCC_PLLSAI2CFGR_PLLSAI2PEN|RCC_PLLSAI2CFGR_PLLSAI2REN); +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ + + /* Reset PLL source to save power if no PLLs on */ + if(READ_BIT(RCC->CR, (RCC_CR_PLLRDY | RCC_CR_PLLSAI1RDY)) == 0U) + { + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, RCC_PLLSOURCE_NONE); + } + + return status; +} + +#endif /* RCC_PLLSAI2_SUPPORT */ + +/** + * @brief Configure the oscillator clock source for wakeup from Stop and CSS backup clock. + * @param WakeUpClk Wakeup clock + * This parameter can be one of the following values: + * @arg @ref RCC_STOP_WAKEUPCLOCK_MSI MSI oscillator selection + * @arg @ref RCC_STOP_WAKEUPCLOCK_HSI HSI oscillator selection + * @note This function shall not be called after the Clock Security System on HSE has been + * enabled. + * @retval None + */ +void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk) +{ + assert_param(IS_RCC_STOP_WAKEUPCLOCK(WakeUpClk)); + + __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(WakeUpClk); +} + +/** + * @brief Configure the MSI range after standby mode. + * @note After Standby its frequency can be selected between 4 possible values (1, 2, 4 or 8 MHz). + * @param MSIRange MSI range + * This parameter can be one of the following values: + * @arg @ref RCC_MSIRANGE_4 Range 4 around 1 MHz + * @arg @ref RCC_MSIRANGE_5 Range 5 around 2 MHz + * @arg @ref RCC_MSIRANGE_6 Range 6 around 4 MHz (reset value) + * @arg @ref RCC_MSIRANGE_7 Range 7 around 8 MHz + * @retval None + */ +void HAL_RCCEx_StandbyMSIRangeConfig(uint32_t MSIRange) +{ + assert_param(IS_RCC_MSI_STANDBY_CLOCK_RANGE(MSIRange)); + + __HAL_RCC_MSI_STANDBY_RANGE_CONFIG(MSIRange); +} + +/** + * @brief Enable the LSE Clock Security System. + * @note Prior to enable the LSE Clock Security System, LSE oscillator is to be enabled + * with HAL_RCC_OscConfig() and the LSE oscillator clock is to be selected as RTC + * clock with HAL_RCCEx_PeriphCLKConfig(). + * @retval None + */ +void HAL_RCCEx_EnableLSECSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Disable the LSE Clock Security System. + * @note LSE Clock Security System can only be disabled after a LSE failure detection. + * @retval None + */ +void HAL_RCCEx_DisableLSECSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; + + /* Disable LSE CSS IT if any */ + __HAL_RCC_DISABLE_IT(RCC_IT_LSECSS); +} + +/** + * @brief Enable the LSE Clock Security System Interrupt & corresponding EXTI line. + * @note LSE Clock Security System Interrupt is mapped on RTC EXTI line 19 + * @retval None + */ +void HAL_RCCEx_EnableLSECSS_IT(void) +{ + /* Enable LSE CSS */ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; + + /* Enable LSE CSS IT */ + __HAL_RCC_ENABLE_IT(RCC_IT_LSECSS); + + /* Enable IT on EXTI Line 19 */ + __HAL_RCC_LSECSS_EXTI_ENABLE_IT(); + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); +} + +/** + * @brief Handle the RCC LSE Clock Security System interrupt request. + * @retval None + */ +void HAL_RCCEx_LSECSS_IRQHandler(void) +{ + /* Check RCC LSE CSSF flag */ + if(__HAL_RCC_GET_IT(RCC_IT_LSECSS)) + { + /* RCC LSE Clock Security System interrupt user callback */ + HAL_RCCEx_LSECSS_Callback(); + + /* Clear RCC LSE CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_LSECSS); + } +} + +/** + * @brief RCCEx LSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_LSECSS_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_LSECSS_Callback should be implemented in the user file + */ +} + +/** + * @brief Select the Low Speed clock source to output on LSCO pin (PA2). + * @param LSCOSource specifies the Low Speed clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_LSCOSOURCE_LSI LSI clock selected as LSCO source + * @arg @ref RCC_LSCOSOURCE_LSE LSE clock selected as LSCO source + * @retval None + */ +void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource) +{ + GPIO_InitTypeDef GPIO_InitStruct; + FlagStatus pwrclkchanged = RESET; + FlagStatus backupchanged = RESET; + + /* Check the parameters */ + assert_param(IS_RCC_LSCOSOURCE(LSCOSource)); + + /* LSCO Pin Clock Enable */ + __LSCO_CLK_ENABLE(); + + /* Configure the LSCO pin in analog mode */ + GPIO_InitStruct.Pin = LSCO_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(LSCO_GPIO_PORT, &GPIO_InitStruct); + + /* Update LSCOSEL clock source in Backup Domain control register */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + HAL_PWR_EnableBkUpAccess(); + backupchanged = SET; + } + + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL | RCC_BDCR_LSCOEN, LSCOSource | RCC_BDCR_LSCOEN); + + if(backupchanged == SET) + { + HAL_PWR_DisableBkUpAccess(); + } + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } +} + +/** + * @brief Disable the Low Speed clock output. + * @retval None + */ +void HAL_RCCEx_DisableLSCO(void) +{ + FlagStatus pwrclkchanged = RESET; + FlagStatus backupchanged = RESET; + + /* Update LSCOEN bit in Backup Domain control register */ + if(__HAL_RCC_PWR_IS_CLK_DISABLED()) + { + __HAL_RCC_PWR_CLK_ENABLE(); + pwrclkchanged = SET; + } + if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) + { + /* Enable access to the backup domain */ + HAL_PWR_EnableBkUpAccess(); + backupchanged = SET; + } + + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); + + /* Restore previous configuration */ + if(backupchanged == SET) + { + /* Disable access to the backup domain */ + HAL_PWR_DisableBkUpAccess(); + } + if(pwrclkchanged == SET) + { + __HAL_RCC_PWR_CLK_DISABLE(); + } +} + +/** + * @brief Enable the PLL-mode of the MSI. + * @note Prior to enable the PLL-mode of the MSI for automatic hardware + * calibration LSE oscillator is to be enabled with HAL_RCC_OscConfig(). + * @retval None + */ +void HAL_RCCEx_EnableMSIPLLMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_MSIPLLEN) ; +} + +/** + * @brief Disable the PLL-mode of the MSI. + * @note PLL-mode of the MSI is automatically reset when LSE oscillator is disabled. + * @retval None + */ +void HAL_RCCEx_DisableMSIPLLMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_MSIPLLEN) ; +} + +#if defined (OCTOSPI1) && defined (OCTOSPI2) +/** + * @brief Configure OCTOSPI instances DQS delays. + * @param Delay1 OCTOSPI1 DQS delay + * @param Delay2 OCTOSPI2 DQS delay + * @note Delay parameters stand for unitary delays from 0 to 15. Actual delay is Delay1 or Delay2 + 1. + * @retval None + */ +void HAL_RCCEx_OCTOSPIDelayConfig(uint32_t Delay1, uint32_t Delay2) +{ + assert_param(IS_RCC_OCTOSPIDELAY(Delay1)); + assert_param(IS_RCC_OCTOSPIDELAY(Delay2)); + + MODIFY_REG(RCC->DLYCFGR, RCC_DLYCFGR_OCTOSPI1_DLY|RCC_DLYCFGR_OCTOSPI2_DLY, (Delay1 | (Delay2 << RCC_DLYCFGR_OCTOSPI2_DLY_Pos))) ; +} +#endif /* OCTOSPI1 && OCTOSPI2 */ + +/** + * @} + */ + +#if defined(CRS) + +/** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions + * @brief Extended Clock Recovery System Control functions + * +@verbatim + =============================================================================== + ##### Extended Clock Recovery System Control functions ##### + =============================================================================== + [..] + For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows: + + (#) In System clock config, HSI48 needs to be enabled + + (#) Enable CRS clock in IP MSP init which will use CRS functions + + (#) Call CRS functions as follows: + (##) Prepare synchronization configuration necessary for HSI48 calibration + (+++) Default values can be set for frequency Error Measurement (reload and error limit) + and also HSI48 oscillator smooth trimming. + (+++) Macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate + directly reload value with target and synchronization frequencies values + (##) Call function HAL_RCCEx_CRSConfig which + (+++) Resets CRS registers to their default values. + (+++) Configures CRS registers with synchronization configuration + (+++) Enables automatic calibration and frequency error counter feature + Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the + periodic USB SOF will not be generated by the host. No SYNC signal will therefore be + provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock + precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs + should be used as SYNC signal. + + (##) A polling function is provided to wait for complete synchronization + (+++) Call function HAL_RCCEx_CRSWaitSynchronization() + (+++) According to CRS status, user can decide to adjust again the calibration or continue + application if synchronization is OK + + (#) User can retrieve information related to synchronization in calling function + HAL_RCCEx_CRSGetSynchronizationInfo() + + (#) Regarding synchronization status and synchronization information, user can try a new calibration + in changing synchronization configuration and call again HAL_RCCEx_CRSConfig. + Note: When the SYNC event is detected during the downcounting phase (before reaching the zero value), + it means that the actual frequency is lower than the target (and so, that the TRIM value should be + incremented), while when it is detected during the upcounting phase it means that the actual frequency + is higher (and that the TRIM value should be decremented). + + (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go + through CRS Handler (CRS_IRQn/CRS_IRQHandler) + (++) Call function HAL_RCCEx_CRSConfig() + (++) Enable CRS_IRQn (thanks to NVIC functions) + (++) Enable CRS interrupt (__HAL_RCC_CRS_ENABLE_IT) + (++) Implement CRS status management in the following user callbacks called from + HAL_RCCEx_CRS_IRQHandler(): + (+++) HAL_RCCEx_CRS_SyncOkCallback() + (+++) HAL_RCCEx_CRS_SyncWarnCallback() + (+++) HAL_RCCEx_CRS_ExpectedSyncCallback() + (+++) HAL_RCCEx_CRS_ErrorCallback() + + (#) To force a SYNC EVENT, user can use the function HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). + This function can be called before calling HAL_RCCEx_CRSConfig (for instance in Systick handler) + +@endverbatim + * @{ + */ + +/** + * @brief Start automatic synchronization for polling mode + * @param pInit Pointer on RCC_CRSInitTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit) +{ + uint32_t value; /* no init needed */ + + /* Check the parameters */ + assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler)); + assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source)); + assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity)); + assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue)); + assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue)); + assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue)); + + /* CONFIGURATION */ + + /* Before configuration, reset CRS registers to their default values*/ + __HAL_RCC_CRS_FORCE_RESET(); + __HAL_RCC_CRS_RELEASE_RESET(); + + /* Set the SYNCDIV[2:0] bits according to Prescaler value */ + /* Set the SYNCSRC[1:0] bits according to Source value */ + /* Set the SYNCSPOL bit according to Polarity value */ + value = (pInit->Prescaler | pInit->Source | pInit->Polarity); + /* Set the RELOAD[15:0] bits according to ReloadValue value */ + value |= pInit->ReloadValue; + /* Set the FELIM[7:0] bits according to ErrorLimitValue value */ + value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_Pos); + WRITE_REG(CRS->CFGR, value); + + /* Adjust HSI48 oscillator smooth trimming */ + /* Set the TRIM[6:0] bits for STM32L412xx/L422xx or TRIM[5:0] bits otherwise + according to RCC_CRS_HSI48CalibrationValue value */ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_Pos)); + + /* START AUTOMATIC SYNCHRONIZATION*/ + + /* Enable Automatic trimming & Frequency error counter */ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN); +} + +/** + * @brief Generate the software synchronization event + * @retval None + */ +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Return synchronization info + * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo) +{ + /* Check the parameter */ + assert_param(pSynchroInfo != (void *)NULL); + + /* Get the reload value */ + pSynchroInfo->ReloadValue = (READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); + + /* Get HSI48 oscillator smooth trimming */ + pSynchroInfo->HSI48CalibrationValue = (READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); + + /* Get Frequency error capture */ + pSynchroInfo->FreqErrorCapture = (READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); + + /* Get Frequency error direction */ + pSynchroInfo->FreqErrorDirection = (READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** +* @brief Wait for CRS Synchronization status. +* @param Timeout Duration of the timeout +* @note Timeout is based on the maximum time to receive a SYNC event based on synchronization +* frequency. +* @note If Timeout set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned. +* @retval Combination of Synchronization status +* This parameter can be a combination of the following values: +* @arg @ref RCC_CRS_TIMEOUT +* @arg @ref RCC_CRS_SYNCOK +* @arg @ref RCC_CRS_SYNCWARN +* @arg @ref RCC_CRS_SYNCERR +* @arg @ref RCC_CRS_SYNCMISS +* @arg @ref RCC_CRS_TRIMOVF +*/ +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) +{ + uint32_t crsstatus = RCC_CRS_NONE; + uint32_t tickstart; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait for CRS flag or timeout detection */ + do + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + crsstatus = RCC_CRS_TIMEOUT; + } + } + /* Check CRS SYNCOK flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK)) + { + /* CRS SYNC event OK */ + crsstatus |= RCC_CRS_SYNCOK; + + /* Clear CRS SYNC event OK bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK); + } + + /* Check CRS SYNCWARN flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN)) + { + /* CRS SYNC warning */ + crsstatus |= RCC_CRS_SYNCWARN; + + /* Clear CRS SYNCWARN bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN); + } + + /* Check CRS TRIM overflow flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_TRIMOVF; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF); + } + + /* Check CRS Error flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_SYNCERR; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR); + } + + /* Check CRS SYNC Missed flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS)) + { + /* CRS SYNC Missed */ + crsstatus |= RCC_CRS_SYNCMISS; + + /* Clear CRS SYNC Missed bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS); + } + + /* Check CRS Expected SYNC flag */ + if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC)) + { + /* frequency error counter reached a zero value */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC); + } + } while(RCC_CRS_NONE == crsstatus); + + return crsstatus; +} + +/** + * @brief Handle the Clock Recovery System interrupt request. + * @retval None + */ +void HAL_RCCEx_CRS_IRQHandler(void) +{ + uint32_t crserror = RCC_CRS_NONE; + /* Get current IT flags and IT sources values */ + uint32_t itflags = READ_REG(CRS->ISR); + uint32_t itsources = READ_REG(CRS->CR); + + /* Check CRS SYNCOK flag */ + if(((itflags & RCC_CRS_FLAG_SYNCOK) != 0U) && ((itsources & RCC_CRS_IT_SYNCOK) != 0U)) + { + /* Clear CRS SYNC event OK flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); + + /* user callback */ + HAL_RCCEx_CRS_SyncOkCallback(); + } + /* Check CRS SYNCWARN flag */ + else if(((itflags & RCC_CRS_FLAG_SYNCWARN) != 0U) && ((itsources & RCC_CRS_IT_SYNCWARN) != 0U)) + { + /* Clear CRS SYNCWARN flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); + + /* user callback */ + HAL_RCCEx_CRS_SyncWarnCallback(); + } + /* Check CRS Expected SYNC flag */ + else if(((itflags & RCC_CRS_FLAG_ESYNC) != 0U) && ((itsources & RCC_CRS_IT_ESYNC) != 0U)) + { + /* frequency error counter reached a zero value */ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); + + /* user callback */ + HAL_RCCEx_CRS_ExpectedSyncCallback(); + } + /* Check CRS Error flags */ + else + { + if(((itflags & RCC_CRS_FLAG_ERR) != 0U) && ((itsources & RCC_CRS_IT_ERR) != 0U)) + { + if((itflags & RCC_CRS_FLAG_SYNCERR) != 0U) + { + crserror |= RCC_CRS_SYNCERR; + } + if((itflags & RCC_CRS_FLAG_SYNCMISS) != 0U) + { + crserror |= RCC_CRS_SYNCMISS; + } + if((itflags & RCC_CRS_FLAG_TRIMOVF) != 0U) + { + crserror |= RCC_CRS_TRIMOVF; + } + + /* Clear CRS Error flags */ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); + + /* user error callback */ + HAL_RCCEx_CRS_ErrorCallback(crserror); + } + } +} + +/** + * @brief RCCEx Clock Recovery System SYNCOK interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncOkCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System SYNCWARN interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncWarnCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Expected SYNC interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Error interrupt callback. + * @param Error Combination of Error status. + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + * @retval none + */ +__weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Error); + + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file + */ +} + +/** + * @} + */ + +#endif /* CRS */ + +/** + * @} + */ + +/** @addtogroup RCCEx_Private_Functions + * @{ + */ + +#if defined(RCC_PLLSAI1_SUPPORT) + +/** + * @brief Configure the parameters N & P & optionally M of PLLSAI1 and enable PLLSAI1 output clock(s). + * @param PllSai1 pointer to an RCC_PLLSAI1InitTypeDef structure that + * contains the configuration parameters N & P & optionally M as well as PLLSAI1 output clock(s) + * @param Divider divider parameter to be updated + * + * @note PLLSAI1 is temporary disable to apply new parameters + * + * @retval HAL status + */ +static HAL_StatusTypeDef RCCEx_PLLSAI1_Config(RCC_PLLSAI1InitTypeDef *PllSai1, uint32_t Divider) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* check for PLLSAI1 Parameters used to output PLLSAI1CLK */ + /* P, Q and R dividers are verified in each specific divider case below */ + assert_param(IS_RCC_PLLSAI1SOURCE(PllSai1->PLLSAI1Source)); + assert_param(IS_RCC_PLLSAI1M_VALUE(PllSai1->PLLSAI1M)); + assert_param(IS_RCC_PLLSAI1N_VALUE(PllSai1->PLLSAI1N)); + assert_param(IS_RCC_PLLSAI1CLOCKOUT_VALUE(PllSai1->PLLSAI1ClockOut)); + + /* Check that PLLSAI1 clock source and divider M can be applied */ + if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_NONE) + { + /* PLL clock source and divider M already set, check that no request for change */ + if((__HAL_RCC_GET_PLL_OSCSOURCE() != PllSai1->PLLSAI1Source) + || + (PllSai1->PLLSAI1Source == RCC_PLLSOURCE_NONE) +#if !defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + || + (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U) != PllSai1->PLLSAI1M) +#endif + ) + { + status = HAL_ERROR; + } + } + else + { + /* Check PLLSAI1 clock source availability */ + switch(PllSai1->PLLSAI1Source) + { + case RCC_PLLSOURCE_MSI: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_MSIRDY)) + { + status = HAL_ERROR; + } + break; + case RCC_PLLSOURCE_HSI: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSIRDY)) + { + status = HAL_ERROR; + } + break; + case RCC_PLLSOURCE_HSE: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSERDY)) + { + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSEBYP)) + { + status = HAL_ERROR; + } + } + break; + default: + status = HAL_ERROR; + break; + } + + if(status == HAL_OK) + { +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* Set PLLSAI1 clock source */ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PllSai1->PLLSAI1Source); +#else + /* Set PLLSAI1 clock source and divider M */ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, PllSai1->PLLSAI1Source | (PllSai1->PLLSAI1M - 1U) << RCC_PLLCFGR_PLLM_Pos); +#endif + } + } + + if(status == HAL_OK) + { + /* Disable the PLLSAI1 */ + __HAL_RCC_PLLSAI1_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI1 is ready to be updated */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { + if(Divider == DIVIDER_P_UPDATE) + { + assert_param(IS_RCC_PLLSAI1P_VALUE(PllSai1->PLLSAI1P)); +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + + /* Configure the PLLSAI1 Division factor M, P and Multiplication factor N*/ +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV | RCC_PLLSAI1CFGR_PLLSAI1M, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (PllSai1->PLLSAI1P << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos) | + ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); +#else + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | RCC_PLLSAI1CFGR_PLLSAI1M, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + ((PllSai1->PLLSAI1P >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos) | + ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#else + /* Configure the PLLSAI1 Division factor P and Multiplication factor N*/ +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (PllSai1->PLLSAI1P << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos)); +#else + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + ((PllSai1->PLLSAI1P >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos)); +#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ + +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + } + else if(Divider == DIVIDER_Q_UPDATE) + { + assert_param(IS_RCC_PLLSAI1Q_VALUE(PllSai1->PLLSAI1Q)); +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* Configure the PLLSAI1 Division factor M, Q and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1M, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (((PllSai1->PLLSAI1Q >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | + ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); +#else + /* Configure the PLLSAI1 Division factor Q and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (((PllSai1->PLLSAI1Q >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos)); +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + } + else + { + assert_param(IS_RCC_PLLSAI1R_VALUE(PllSai1->PLLSAI1R)); +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* Configure the PLLSAI1 Division factor M, R and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R | RCC_PLLSAI1CFGR_PLLSAI1M, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (((PllSai1->PLLSAI1R >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | + ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); +#else + /* Configure the PLLSAI1 Division factor R and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI1CFGR, + RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R, + (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | + (((PllSai1->PLLSAI1R >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos)); +#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ + } + + /* Enable the PLLSAI1 again by setting PLLSAI1ON to 1*/ + __HAL_RCC_PLLSAI1_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI1 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { + /* Configure the PLLSAI1 Clock output(s) */ + __HAL_RCC_PLLSAI1CLKOUT_ENABLE(PllSai1->PLLSAI1ClockOut); + } + } + } + + return status; +} + +#endif /* RCC_PLLSAI1_SUPPORT */ + +#if defined(RCC_PLLSAI2_SUPPORT) + +/** + * @brief Configure the parameters N & P & optionally M of PLLSAI2 and enable PLLSAI2 output clock(s). + * @param PllSai2 pointer to an RCC_PLLSAI2InitTypeDef structure that + * contains the configuration parameters N & P & optionally M as well as PLLSAI2 output clock(s) + * @param Divider divider parameter to be updated + * + * @note PLLSAI2 is temporary disable to apply new parameters + * + * @retval HAL status + */ +static HAL_StatusTypeDef RCCEx_PLLSAI2_Config(RCC_PLLSAI2InitTypeDef *PllSai2, uint32_t Divider) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* check for PLLSAI2 Parameters used to output PLLSAI2CLK */ + /* P, Q and R dividers are verified in each specific divider case below */ + assert_param(IS_RCC_PLLSAI2SOURCE(PllSai2->PLLSAI2Source)); + assert_param(IS_RCC_PLLSAI2M_VALUE(PllSai2->PLLSAI2M)); + assert_param(IS_RCC_PLLSAI2N_VALUE(PllSai2->PLLSAI2N)); + assert_param(IS_RCC_PLLSAI2CLOCKOUT_VALUE(PllSai2->PLLSAI2ClockOut)); + + /* Check that PLLSAI2 clock source and divider M can be applied */ + if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_NONE) + { + /* PLL clock source and divider M already set, check that no request for change */ + if((__HAL_RCC_GET_PLL_OSCSOURCE() != PllSai2->PLLSAI2Source) + || + (PllSai2->PLLSAI2Source == RCC_PLLSOURCE_NONE) +#if !defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + || + (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U) != PllSai2->PLLSAI2M) +#endif + ) + { + status = HAL_ERROR; + } + } + else + { + /* Check PLLSAI2 clock source availability */ + switch(PllSai2->PLLSAI2Source) + { + case RCC_PLLSOURCE_MSI: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_MSIRDY)) + { + status = HAL_ERROR; + } + break; + case RCC_PLLSOURCE_HSI: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSIRDY)) + { + status = HAL_ERROR; + } + break; + case RCC_PLLSOURCE_HSE: + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSERDY)) + { + if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSEBYP)) + { + status = HAL_ERROR; + } + } + break; + default: + status = HAL_ERROR; + break; + } + + if(status == HAL_OK) + { +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + /* Set PLLSAI2 clock source */ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PllSai2->PLLSAI2Source); +#else + /* Set PLLSAI2 clock source and divider M */ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, PllSai2->PLLSAI2Source | (PllSai2->PLLSAI2M - 1U) << RCC_PLLCFGR_PLLM_Pos); +#endif + } + } + + if(status == HAL_OK) + { + /* Disable the PLLSAI2 */ + __HAL_RCC_PLLSAI2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI2 is ready to be updated */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { + if(Divider == DIVIDER_P_UPDATE) + { + assert_param(IS_RCC_PLLSAI2P_VALUE(PllSai2->PLLSAI2P)); +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + + /* Configure the PLLSAI2 Division factor M, P and Multiplication factor N*/ +#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV | RCC_PLLSAI2CFGR_PLLSAI2M, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + (PllSai2->PLLSAI2P << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos) | + ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); +#else + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | RCC_PLLSAI2CFGR_PLLSAI2M, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + ((PllSai2->PLLSAI2P >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos) | + ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); +#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ + +#else + /* Configure the PLLSAI2 Division factor P and Multiplication factor N*/ +#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + (PllSai2->PLLSAI2P << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos)); +#else + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + ((PllSai2->PLLSAI2P >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos)); +#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ + +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + } +#if defined(RCC_PLLSAI2Q_DIV_SUPPORT) + else if(Divider == DIVIDER_Q_UPDATE) + { + assert_param(IS_RCC_PLLSAI2Q_VALUE(PllSai2->PLLSAI2Q)); +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + /* Configure the PLLSAI2 Division factor M, Q and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2Q | RCC_PLLSAI2CFGR_PLLSAI2M, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + (((PllSai2->PLLSAI2Q >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) | + ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); +#else + /* Configure the PLLSAI2 Division factor Q and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2Q, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + (((PllSai2->PLLSAI2Q >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos)); +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + } +#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ + else + { + assert_param(IS_RCC_PLLSAI2R_VALUE(PllSai2->PLLSAI2R)); +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + /* Configure the PLLSAI2 Division factor M, R and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2M, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + (((PllSai2->PLLSAI2R >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | + ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); +#else + /* Configure the PLLSAI2 Division factor R and Multiplication factor N*/ + MODIFY_REG(RCC->PLLSAI2CFGR, + RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R, + (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | + (((PllSai2->PLLSAI2R >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos)); +#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ + } + + /* Enable the PLLSAI2 again by setting PLLSAI2ON to 1*/ + __HAL_RCC_PLLSAI2_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLLSAI2 is ready */ + while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == 0U) + { + if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) + { + status = HAL_TIMEOUT; + break; + } + } + + if(status == HAL_OK) + { + /* Configure the PLLSAI2 Clock output(s) */ + __HAL_RCC_PLLSAI2CLKOUT_ENABLE(PllSai2->PLLSAI2ClockOut); + } + } + } + + return status; +} + +#endif /* RCC_PLLSAI2_SUPPORT */ + +#if defined(SAI1) + +static uint32_t RCCEx_GetSAIxPeriphCLKFreq(uint32_t PeriphClk, uint32_t InputFrequency) +{ + uint32_t frequency = 0U; + uint32_t srcclk = 0U; + uint32_t pllvco, plln; /* no init needed */ +#if defined(RCC_PLLP_SUPPORT) + uint32_t pllp = 0U; +#endif /* RCC_PLLP_SUPPORT */ + + /* Handle SAIs */ + if(PeriphClk == RCC_PERIPHCLK_SAI1) + { + srcclk = __HAL_RCC_GET_SAI1_SOURCE(); + if(srcclk == RCC_SAI1CLKSOURCE_PIN) + { + frequency = EXTERNAL_SAI1_CLOCK_VALUE; + } + /* Else, PLL clock output to check below */ + } +#if defined(SAI2) + else + { + if(PeriphClk == RCC_PERIPHCLK_SAI2) + { + srcclk = __HAL_RCC_GET_SAI2_SOURCE(); + if(srcclk == RCC_SAI2CLKSOURCE_PIN) + { + frequency = EXTERNAL_SAI2_CLOCK_VALUE; + } + /* Else, PLL clock output to check below */ + } + } +#endif /* SAI2 */ + + if(frequency == 0U) + { + pllvco = InputFrequency; + +#if defined(SAI2) + if((srcclk == RCC_SAI1CLKSOURCE_PLL) || (srcclk == RCC_SAI2CLKSOURCE_PLL)) + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY) && (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLL_SAI3CLK) != 0U)) + { + /* f(PLL Source) / PLLM */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + /* f(PLLSAI3CLK) = f(VCO input) * PLLN / PLLP */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) + pllp = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; +#endif + if(pllp == 0U) + { + if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != 0U) + { + pllp = 17U; + } + else + { + pllp = 7U; + } + } + frequency = (pllvco * plln) / pllp; + } + } + else if(srcclk == 0U) /* RCC_SAI1CLKSOURCE_PLLSAI1 || RCC_SAI2CLKSOURCE_PLLSAI1 */ + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY) && (__HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(RCC_PLLSAI1_SAI1CLK) != 0U)) + { +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* PLLSAI1M exists: apply PLLSAI1M divider for PLLSAI1 output computation */ + /* f(PLLSAI1 Source) / PLLSAI1M */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); +#else + /* f(PLL Source) / PLLM */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); +#endif + /* f(PLLSAI1CLK) = f(VCOSAI1 input) * PLLSAI1N / PLLSAI1P */ + plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + pllp = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos; +#endif + if(pllp == 0U) + { + if(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P) != 0U) + { + pllp = 17U; + } + else + { + pllp = 7U; + } + } + frequency = (pllvco * plln) / pllp; + } + } +#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + else if((srcclk == RCC_SAI1CLKSOURCE_HSI) || (srcclk == RCC_SAI2CLKSOURCE_HSI)) + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = HSI_VALUE; + } + } +#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#else + if(srcclk == RCC_SAI1CLKSOURCE_PLL) + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY) && (__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLL_SAI2CLK) != 0U)) + { + /* f(PLL Source) / PLLM */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); + /* f(PLLSAI2CLK) = f(VCO input) * PLLN / PLLP */ + plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; +#if defined(RCC_PLLP_DIV_2_31_SUPPORT) + pllp = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; +#endif + if(pllp == 0U) + { + if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != 0U) + { + pllp = 17U; + } + else + { + pllp = 7U; + } + } + frequency = (pllvco * plln) / pllp; + } + else if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + /* HSI automatically selected as clock source if PLLs not enabled */ + frequency = HSI_VALUE; + } + else + { + /* No clock source, frequency default init at 0 */ + } + } + else if(srcclk == RCC_SAI1CLKSOURCE_PLLSAI1) + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY) && (__HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(RCC_PLLSAI1_SAI1CLK) != 0U)) + { +#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) + /* PLLSAI1M exists: apply PLLSAI1M divider for PLLSAI1 output computation */ + /* f(PLLSAI1 Source) / PLLSAI1M */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); +#else + /* f(PLL Source) / PLLM */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); +#endif + /* f(PLLSAI1CLK) = f(VCOSAI1 input) * PLLSAI1N / PLLSAI1P */ + plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; +#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) + pllp = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos; +#endif + if(pllp == 0U) + { + if(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P) != 0U) + { + pllp = 17U; + } + else + { + pllp = 7U; + } + } + frequency = (pllvco * plln) / pllp; + } + else if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + /* HSI automatically selected as clock source if PLLs not enabled */ + frequency = HSI_VALUE; + } + else + { + /* No clock source, frequency default init at 0 */ + } + } +#endif /* SAI2 */ + +#if defined(RCC_PLLSAI2_SUPPORT) + + else if((srcclk == RCC_SAI1CLKSOURCE_PLLSAI2) || (srcclk == RCC_SAI2CLKSOURCE_PLLSAI2)) + { + if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI2RDY) && (__HAL_RCC_GET_PLLSAI2CLKOUT_CONFIG(RCC_PLLSAI2_SAI2CLK) != 0U)) + { +#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) + /* PLLSAI2M exists: apply PLLSAI2M divider for PLLSAI2 output computation */ + /* f(PLLSAI2 Source) / PLLSAI2M */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)); +#else + /* f(PLL Source) / PLLM */ + pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); +#endif + /* f(PLLSAI2CLK) = f(VCOSAI2 input) * PLLSAI2N / PLLSAI2P */ + plln = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos; +#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) + pllp = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PDIV) >> RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos; +#endif + if(pllp == 0U) + { + if(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P) != 0U) + { + pllp = 17U; + } + else + { + pllp = 7U; + } + } + frequency = (pllvco * plln) / pllp; + } + } + +#endif /* RCC_PLLSAI2_SUPPORT */ + + else + { + /* No clock source, frequency default init at 0 */ + } + } + + + return frequency; +} + +#endif /* SAI1 */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + + diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c new file mode 100644 index 0000000..c5c33c7 --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart.c @@ -0,0 +1,4919 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_uart.c + * @author MCD Application Team + * @brief UART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The UART HAL driver can be used as follows: + + (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). + (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) UART pins configuration: + (+++) Enable the clock for the UART GPIOs. + (+++) Configure these UART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() + and HAL_UART_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) UART interrupts handling: + -@@- The specific UART interrupts (Transmission complete interrupt, + RXNE interrupt, RX/TX FIFOs related interrupts and Error Interrupts) + are managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() + inside the transmit and receive processes. + (++) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() + and HAL_UART_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Prescaler value , Hardware + flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. + + (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...) + in the huart handle AdvancedInit structure. + + (#) For the UART asynchronous mode, initialize the UART registers by calling + the HAL_UART_Init() API. + + (#) For the UART Half duplex mode, initialize the UART registers by calling + the HAL_HalfDuplex_Init() API. + + (#) For the UART LIN (Local Interconnection Network) mode, initialize the UART registers + by calling the HAL_LIN_Init() API. + + (#) For the UART Multiprocessor mode, initialize the UART registers + by calling the HAL_MultiProcessor_Init() API. + + (#) For the UART RS485 Driver Enabled mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + [..] + (@) These API's (HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), + also configure the low level Hardware GPIO, CLOCK, CORTEX...etc) by + calling the customized HAL_UART_MspInit() API. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_UART_RegisterCallback() to register a user callback. + Function HAL_UART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. +#if defined(USART_CR1_FIFOEN) + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. +#endif + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_UART_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. +#if defined(USART_CR1_FIFOEN) + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. +#endif + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + + [..] + For specific callback RxEventCallback, use dedicated registration/reset functions: + respectively HAL_UART_RegisterRxEventCallback() , HAL_UART_UnRegisterRxEventCallback(). + + [..] + By default, after the HAL_UART_Init() and when the state is HAL_UART_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_UART_TxCpltCallback(), HAL_UART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak functions in the HAL_UART_Init() + and HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_UART_Init() and HAL_UART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_UART_RegisterCallback() before calling HAL_UART_DeInit() + or HAL_UART_Init() function. + + [..] + When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak callbacks are used. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup UART UART + * @brief HAL UART module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UART_Private_Constants UART Private Constants + * @{ + */ +#if defined(USART_CR1_FIFOEN) +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | \ + USART_CR1_OVER8 | USART_CR1_FIFOEN)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ +#else +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | \ + USART_CR1_OVER8)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ +#endif /* USART_CR1_FIFOEN */ + +#if defined(USART_CR1_FIFOEN) +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT | USART_CR3_TXFTCFG | \ + USART_CR3_RXFTCFG)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ +#else +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE |\ + USART_CR3_ONEBIT)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ +#endif /* USART_CR1_FIFOEN */ + +#define LPUART_BRR_MIN 0x00000300U /* LPUART BRR minimum authorized value */ +#define LPUART_BRR_MAX 0x000FFFFFU /* LPUART BRR maximum authorized value */ + +#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ +#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup UART_Private_Functions + * @{ + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart); +static void UART_EndTxTransfer(UART_HandleTypeDef *huart); +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAError(DMA_HandleTypeDef *hdma); +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart); +#if defined(USART_CR1_FIFOEN) +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +#endif /* USART_CR1_FIFOEN */ +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart); +#if defined(USART_CR1_FIFOEN) +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +#if defined(USART_PRESC_PRESCALER) +/** @addtogroup UART_Private_variables + * @{ + */ +const uint16_t UARTPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; +/** + * @} + */ + +#endif /* USART_PRESC_PRESCALER */ +/* Exported Constants --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init()and HAL_MultiProcessor_Init()API + follow respectively the UART asynchronous, UART Half duplex, UART LIN mode + and UART multiprocessor mode configuration procedures (details for the procedures + are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the UART mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) + { + /* Check the parameters */ + assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); + } + else + { + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Initialize the half-duplex mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check UART instance */ + assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In half-duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the LIN mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param BreakDetectLength Specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection + * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the LIN UART instance */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + /* Check the Break detection length parameter */ + assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); + + /* LIN mode limited to 16-bit oversampling only */ + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + return HAL_ERROR; + } + /* LIN mode limited to 8-bit data length */ + if (huart->Init.WordLength != UART_WORDLENGTH_8B) + { + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In LIN mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); + + /* Set the USART LIN Break detection length. */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the multiprocessor mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @param Address UART node address (4-, 6-, 7- or 8-bit long). + * @param WakeUpMethod Specifies the UART wakeup method. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection + * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark + * @note If the user resorts to idle line detection wake up, the Address parameter + * is useless and ignored by the initialization function. + * @note If the user resorts to address mark wake up, the address length detection + * is configured by default to 4 bits only. For the UART to be able to + * manage 6-, 7- or 8-bit long addresses detection, the API + * HAL_MultiProcessorEx_AddressLength_Set() must be called after + * HAL_MultiProcessor_Init(). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the wake up method parameter */ + assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In multiprocessor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register. */ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK) + { + /* If address mark wake up method is chosen, set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS)); + } + + /* Set the wake up method by setting the WAKE bit in the CR1 register */ + MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief DeInitialize the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + huart->Instance->CR1 = 0x0U; + huart->Instance->CR2 = 0x0U; + huart->Instance->CR3 = 0x0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + if (huart->MspDeInitCallback == NULL) + { + huart->MspDeInitCallback = HAL_UART_MspDeInit; + } + /* DeInit the low level hardware */ + huart->MspDeInitCallback(huart); +#else + /* DeInit the low level hardware */ + HAL_UART_MspDeInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_RESET; + huart->RxState = HAL_UART_STATE_RESET; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Initialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User UART Callback + * To be used to override the weak predefined callback + * @note The HAL_UART_RegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID +#if defined(USART_CR1_FIFOEN) + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID +#endif + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_READY) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = pCallback; + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = pCallback; + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = pCallback; + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = pCallback; + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = pCallback; + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = pCallback; + break; + +#if defined(USART_CR1_FIFOEN) + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = pCallback; + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = pCallback; + break; +#endif /* USART_CR1_FIFOEN */ + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (huart->gState == HAL_UART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an UART Callback + * UART callaback is redirected to the weak predefined callback + * @note The HAL_UART_UnRegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to un-register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID +#if defined(USART_CR1_FIFOEN) + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID +#endif + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_UART_STATE_READY == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + break; + +#if defined(USART_CR1_FIFOEN) + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + +#endif /* USART_CR1_FIFOEN */ + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (HAL_UART_STATE_RESET == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register a User UART Rx Event Callback + * To be used instead of the weak predefined callback + * @param huart Uart handle + * @param pCallback Pointer to the Rx Event Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (huart->RxState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = pCallback; + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the UART Rx Event Callback + * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback + * @param huart Uart handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (huart->RxState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group2 IO operation functions + * @brief UART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of functions allowing to manage the UART asynchronous + and Half duplex data transfers. + + (#) There are two mode of transfer: + (+) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (+) Non-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (+) HAL_UART_Transmit() + (+) HAL_UART_Receive() + + (#) Non-Blocking mode API's with Interrupt are : + (+) HAL_UART_Transmit_IT() + (+) HAL_UART_Receive_IT() + (+) HAL_UART_IRQHandler() + + (#) Non-Blocking mode API's with DMA are : + (+) HAL_UART_Transmit_DMA() + (+) HAL_UART_Receive_DMA() + (+) HAL_UART_DMAPause() + (+) HAL_UART_DMAResume() + (+) HAL_UART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (+) HAL_UART_TxHalfCpltCallback() + (+) HAL_UART_TxCpltCallback() + (+) HAL_UART_RxHalfCpltCallback() + (+) HAL_UART_RxCpltCallback() + (+) HAL_UART_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (+) HAL_UART_Abort() + (+) HAL_UART_AbortTransmit() + (+) HAL_UART_AbortReceive() + (+) HAL_UART_Abort_IT() + (+) HAL_UART_AbortTransmit_IT() + (+) HAL_UART_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (+) HAL_UART_AbortCpltCallback() + (+) HAL_UART_AbortTransmitCpltCallback() + (+) HAL_UART_AbortReceiveCpltCallback() + + (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced + reception services: + (+) HAL_UARTEx_RxEventCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_UART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on UART side. + If user wants to abort it, Abort services should be called by user. + (+) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() + user callback is executed. + + -@- In the Half duplex communication, it is forbidden to run the transmit + and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When FIFO mode is enabled, writing a data in the TDR register adds one + * data to the TXFIFO. Write operations to the TDR register are performed + * when TXFNF flag is set. From hardware perspective, TXFNF flag and + * TXE are mapped on the same bit-field. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + const uint8_t *pdata8bits; + const uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (const uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + while (huart->TxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + huart->TxXferCount--; + } + + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + huart->RxXferCount--; + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + huart->TxISR = NULL; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + +#if defined(USART_CR1_FIFOEN) + /* Configure Tx interrupt processing */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT_FIFOEN; + } + else + { + huart->TxISR = UART_TxISR_8BIT_FIFOEN; + } + + /* Enable the TX FIFO threshold interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + } + else + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT; + } + else + { + huart->TxISR = UART_TxISR_8BIT; + } + + /* Enable the Transmit Data Register Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } +#else + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT; + } + else + { + huart->TxISR = UART_TxISR_8BIT; + } + + /* Enable the Transmit Data Register Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE); +#endif /* USART_CR1_FIFOEN */ + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + return (UART_Start_Receive_IT(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + if (huart->hdmatx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmatx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmatx->XferAbortCallback = NULL; + + /* Enable the UART transmit DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmatx, (uint32_t)huart->pTxBuffPtr, (uint32_t)&huart->Instance->TDR, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + /* Clear the TC flag in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + return (UART_Start_Receive_DMA(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) +{ + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + /* Disable the UART DMA Tx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Rx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) +{ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + /* Enable the UART DMA Tx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the UART DMA Rx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() / + HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel */ + if (huart->hdmatx != NULL) + { + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndRxTransfer(huart); + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) +{ +#if defined(USART_CR1_FIFOEN) + /* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | + USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE); +#else + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); +#endif /* USART_CR1_FIFOEN */ + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + +#if defined(USART_CR1_FIFOEN) + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } +#endif /* USART_CR1_FIFOEN */ + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) +{ +#if defined(USART_CR1_FIFOEN) + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); +#else + /* Disable TXEIE and TCIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); +#endif /* USART_CR1_FIFOEN */ + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + +#if defined(USART_CR1_FIFOEN) + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } +#endif /* USART_CR1_FIFOEN */ + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) +{ +#if defined(USART_CR1_FIFOEN) + /* Disable PEIE, EIE, RXNEIE and RXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE); +#else + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); +#endif /* USART_CR1_FIFOEN */ + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) +{ + uint32_t abortcplt = 1U; + + /* Disable interrupts */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | + USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); +#endif /* USART_CR1_FIFOEN */ + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (huart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; + } + else + { + huart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (huart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; + } + else + { + huart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* UART Tx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + huart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* UART Rx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + huart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + +#if defined(USART_CR1_FIFOEN) + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } +#endif /* USART_CR1_FIFOEN */ + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable interrupts */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); +#endif /* USART_CR1_FIFOEN */ + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ + huart->hdmatx->XferAbortCallback(huart->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + +#if defined(USART_CR1_FIFOEN) + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } +#endif /* USART_CR1_FIFOEN */ + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); +#endif /* USART_CR1_FIFOEN */ + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle UART interrupt request. + * @param huart UART handle. + * @retval None + */ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) +{ + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* UART in mode Receiver ---------------------------------------------------*/ +#if defined(USART_CR1_FIFOEN) + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) +#else + if (((isrflags & USART_ISR_RXNE) != 0U) + && ((cr1its & USART_CR1_RXNEIE) != 0U)) +#endif /* USART_CR1_FIFOEN */ + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + return; + } + } + + /* If some errors occur */ +#if defined(USART_CR1_FIFOEN) + if ((errorflags != 0U) + && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U)))) +#else + if ((errorflags != 0U) + && (((cr3its & USART_CR3_EIE) != 0U) + || ((cr1its & (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U))) +#endif /* USART_CR1_FIFOEN */ + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* UART Over-Run interrupt occurred -----------------------------------------*/ +#if defined(USART_CR1_FIFOEN) + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || + ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) +#else + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE) != 0U) || + ((cr3its & USART_CR3_EIE) != 0U))) +#endif /* USART_CR1_FIFOEN */ + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + huart->ErrorCode |= HAL_UART_ERROR_ORE; + } + + /* UART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + huart->ErrorCode |= HAL_UART_ERROR_RTO; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* UART in mode Receiver --------------------------------------------------*/ +#if defined(USART_CR1_FIFOEN) + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) +#else + if (((isrflags & USART_ISR_RXNE) != 0U) + && ((cr1its & USART_CR1_RXNEIE) != 0U)) +#endif /* USART_CR1_FIFOEN */ + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = huart->ErrorCode; + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & (HAL_UART_ERROR_RTO | HAL_UART_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + UART_EndRxTransfer(huart); + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if ((huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + && ((isrflags & USART_ISR_IDLE) != 0U) + && ((cr1its & USART_ISR_IDLE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* Check if DMA mode is enabled in UART */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* DMA mode enabled */ + /* Check received length : If all expected data are received, do nothing, + (DMA cplt callback will be called). + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); + if ((nb_remaining_rx_data > 0U) + && (nb_remaining_rx_data < huart->RxXferSize)) + { + /* Reception is not complete */ + huart->RxXferCount = nb_remaining_rx_data; + + /* In Normal mode, end DMA xfer and HAL UART Rx process*/ + if (HAL_IS_BIT_CLR(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Last bytes received, so no need as the abort is immediate */ + (void)HAL_DMA_Abort(huart->hdmarx); + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* If DMA is in Circular mode, Idle event is to be reported to user + even if occurring after a Transfer Complete event from DMA */ + if (nb_remaining_rx_data == huart->RxXferSize) + { + if (HAL_IS_BIT_SET(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC)) + { + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + } + } + return; + } + else + { + /* DMA mode not enabled */ + /* Check received length : If all expected data are received, do nothing. + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; + if ((huart->RxXferCount > 0U) + && (nb_rx_data > 0U)) + { +#if defined(USART_CR1_FIFOEN) + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt:(Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); +#else + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); +#endif /* USART_CR1_FIFOEN */ + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxEventCallback(huart, nb_rx_data); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, nb_rx_data); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + return; + } + } + + /* UART wakeup from Stop mode interrupt occurred ---------------------------*/ + if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_WUF); + + /* UART Rx state is not reset as a reception process might be ongoing. + If UART handle state fields need to be reset to READY, this could be done in Wakeup callback */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Wakeup Callback */ + huart->WakeupCallback(huart); +#else + /* Call legacy weak Wakeup Callback */ + HAL_UARTEx_WakeupCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART in mode Transmitter ------------------------------------------------*/ +#if defined(USART_CR1_FIFOEN) + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) +#else + if (((isrflags & USART_ISR_TXE) != 0U) + && ((cr1its & USART_CR1_TXEIE) != 0U)) +#endif /* USART_CR1_FIFOEN */ + { + if (huart->TxISR != NULL) + { + huart->TxISR(huart); + } + return; + } + + /* UART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + UART_EndTransmit_IT(huart); + return; + } + +#if defined(USART_CR1_FIFOEN) + /* UART TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + huart->TxFifoEmptyCallback(huart); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_UARTEx_TxFifoEmptyCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + huart->RxFifoFullCallback(huart); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_UARTEx_RxFifoFullCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } +#endif /* USART_CR1_FIFOEN */ +} + +/** + * @brief Tx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART error callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Receive Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). + * @param huart UART handle + * @param Size Number of data available in application reception buffer (indicates a position in + * reception buffer until which, data are available) + * @retval None + */ +__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + UNUSED(Size); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxEventCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions + * @brief UART control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the UART. + (+) HAL_UART_ReceiverTimeout_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_UART_EnableReceiverTimeout() API enables the receiver timeout feature + (+) HAL_UART_DisableReceiverTimeout() API disables the receiver timeout feature + (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode + (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode + (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode + (+) UART_SetConfig() API configures the UART peripheral + (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features + (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization + (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter + (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver + (+) HAL_LIN_SendBreak() API transmits the break characters +@endverbatim + * @{ + */ + +/** + * @brief Update on the fly the receiver timeout value in RTOR register. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param TimeoutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); + MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); + } +} + +/** + * @brief Enable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable UART in mute mode (does not mean UART enters mute mode; + * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Enable USART mute mode by setting the MME bit in the CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Disable UART mute mode (does not mean the UART actually exits mute mode + * as it may not have been in mute mode at this very moment). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable USART mute mode by clearing the MME bit in the CR1 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Enter UART mute mode (means UART actually enters mute mode). + * @note To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. + * @param huart UART handle. + * @retval None + */ +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST); +} + +/** + * @brief Enable the UART transmitter and disable the UART receiver. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the UART receiver and disable the UART transmitter. + * @param huart UART handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + + +/** + * @brief Transmit break characters. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Send break characters */ + __HAL_UART_SEND_REQ(huart, UART_SENDBREAK_REQUEST); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief UART Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the UART handle state. + (+) Return the UART handle error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the UART handle state. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval HAL state + */ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart) +{ + uint32_t temp1; + uint32_t temp2; + temp1 = huart->gState; + temp2 = huart->RxState; + + return (HAL_UART_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the UART handle error code. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval UART Error Code + */ +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart) +{ + return huart->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UART_Private_Functions UART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param huart UART handle. + * @retval none + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) +{ + /* Init the UART Callback settings */ + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ +#if defined(USART_CR1_FIFOEN) + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ +#endif /* USART_CR1_FIFOEN */ + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ + +} +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @brief Configure the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg; + uint16_t brrtemp; + UART_ClockSourceTypeDef clocksource; + uint32_t usartdiv; + HAL_StatusTypeDef ret = HAL_OK; +#if defined(USART_PRESC_PRESCALER) + uint32_t lpuart_ker_ck_pres; +#endif /* USART_PRESC_PRESCALER */ + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + if (UART_INSTANCE_LOWPOWER(huart)) + { + assert_param(IS_LPUART_STOPBITS(huart->Init.StopBits)); + } + else + { + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); + } + + assert_param(IS_UART_PARITY(huart->Init.Parity)); + assert_param(IS_UART_MODE(huart->Init.Mode)); + assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); +#if defined(USART_PRESC_PRESCALER) + assert_param(IS_UART_PRESCALER(huart->Init.ClockPrescaler)); +#endif /* USART_PRESC_PRESCALER */ + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure + * the UART Word Length, Parity, Mode and oversampling: + * set the M bits according to huart->Init.WordLength value + * set PCE and PS bits according to huart->Init.Parity value + * set TE and RE bits according to huart->Init.Mode value + * set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; + MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits according + * to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - UART HardWare Flow Control: set CTSE and RTSE bits according + * to huart->Init.HwFlowCtl value + * - one-bit sampling method versus three samples' majority rule according + * to huart->Init.OneBitSampling (not applicable to LPUART) */ + tmpreg = (uint32_t)huart->Init.HwFlowCtl; + + if (!(UART_INSTANCE_LOWPOWER(huart))) + { + tmpreg |= huart->Init.OneBitSampling; + } + MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); + +#if defined(USART_PRESC_PRESCALER) + /*-------------------------- USART PRESC Configuration -----------------------*/ + /* Configure + * - UART Clock Prescaler : set PRESCALER according to huart->Init.ClockPrescaler value */ + MODIFY_REG(huart->Instance->PRESC, USART_PRESC_PRESCALER, huart->Init.ClockPrescaler); +#endif /* USART_PRESC_PRESCALER */ + + /*-------------------------- USART BRR Configuration -----------------------*/ + UART_GETCLOCKSOURCE(huart, clocksource); + + /* Check LPUART instance */ + if (UART_INSTANCE_LOWPOWER(huart)) + { + /* Retrieve frequency clock */ + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* If proper clock source reported */ + if (pclk != 0U) + { +#if defined(USART_PRESC_PRESCALER) + /* Compute clock after Prescaler */ + lpuart_ker_ck_pres = (pclk / UARTPrescTable[huart->Init.ClockPrescaler]); + + /* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */ + if ((lpuart_ker_ck_pres < (3U * huart->Init.BaudRate)) || + (lpuart_ker_ck_pres > (4096U * huart->Init.BaudRate))) + { + ret = HAL_ERROR; + } + else + { + /* Check computed UsartDiv value is in allocated range + (it is forbidden to write values lower than 0x300 in the LPUART_BRR register) */ + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) + { + huart->Instance->BRR = usartdiv; + } + else + { + ret = HAL_ERROR; + } + } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) || + (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */ +#else + /* No Prescaler applicable */ + /* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */ + if ((pclk < (3U * huart->Init.BaudRate)) || + (pclk > (4096U * huart->Init.BaudRate))) + { + ret = HAL_ERROR; + } + else + { + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate)); + if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) + { + huart->Instance->BRR = usartdiv; + } + else + { + ret = HAL_ERROR; + } + } /* if ( (pclk < (3 * huart->Init.BaudRate) ) || (pclk > (4096 * huart->Init.BaudRate) )) */ +#endif /* USART_PRESC_PRESCALER */ + } /* if (pclk != 0) */ + } + /* Check UART Over Sampling to set Baud Rate Register */ + else if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_PCLK2: + pclk = HAL_RCC_GetPCLK2Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + /* USARTDIV must be greater than or equal to 0d16 */ + if (pclk != 0U) + { +#if defined(USART_PRESC_PRESCALER) + usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); +#else + usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate)); +#endif /* USART_PRESC_PRESCALER */ + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + huart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + } + } + else + { + switch (clocksource) + { + case UART_CLOCKSOURCE_PCLK1: + pclk = HAL_RCC_GetPCLK1Freq(); + break; + case UART_CLOCKSOURCE_PCLK2: + pclk = HAL_RCC_GetPCLK2Freq(); + break; + case UART_CLOCKSOURCE_HSI: + pclk = (uint32_t) HSI_VALUE; + break; + case UART_CLOCKSOURCE_SYSCLK: + pclk = HAL_RCC_GetSysClockFreq(); + break; + case UART_CLOCKSOURCE_LSE: + pclk = (uint32_t) LSE_VALUE; + break; + default: + pclk = 0U; + ret = HAL_ERROR; + break; + } + + if (pclk != 0U) + { + /* USARTDIV must be greater than or equal to 0d16 */ +#if defined(USART_PRESC_PRESCALER) + usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); +#else + usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate)); +#endif /* USART_PRESC_PRESCALER */ + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + huart->Instance->BRR = (uint16_t)usartdiv; + } + else + { + ret = HAL_ERROR; + } + } + } + +#if defined(USART_CR1_FIFOEN) + /* Initialize the number of data to process during RX/TX ISR execution */ + huart->NbTxDataToProcess = 1; + huart->NbRxDataToProcess = 1; +#endif /* USART_CR1_FIFOEN */ + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + return ret; +} + +/** + * @brief Configure the UART peripheral advanced features. + * @param huart UART handle. + * @retval None + */ +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); + } + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); + } + + /* if required, configure auto Baud rate detection scheme */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) + { + assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); + /* set auto Baudrate detection parameters if detection is enabled */ + if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) + { + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); + } + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); + } +} + +/** + * @brief Check the UART Idle State. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) +{ + uint32_t tickstart; + + /* Initialize the UART ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Disable TXE interrupt for the interrupt process */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE)); +#endif /* USART_CR1_FIFOEN */ + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Check if the Receiver is enabled */ + if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); +#endif /* USART_CR1_FIFOEN */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->RxState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief This function handles UART Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param huart UART handle. + * @param Flag Specifies the UART flag to check + * @param Status The actual Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + + return HAL_TIMEOUT; + } + + if ((READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) && (Flag != UART_FLAG_TXE) && (Flag != UART_FLAG_TC)) + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) == SET) + { + /* Clear Overrun Error flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_ORE; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_ERROR; + } + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) + { + /* Clear Receiver Timeout flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_RTO; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in interrupt mode. + * @note This function could be called by all HAL UART API providing reception in Interrupt mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + huart->RxISR = NULL; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + +#if defined(USART_CR1_FIFOEN) + /* Configure Rx interrupt processing */ + if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT_FIFOEN; + } + else + { + huart->RxISR = UART_RxISR_8BIT_FIFOEN; + } + + /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT; + } + else + { + huart->RxISR = UART_RxISR_8BIT; + } + + /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } +#else + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT; + } + else + { + huart->RxISR = UART_RxISR_8BIT; + } + + /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE); + } + else + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE); + } +#endif /* USART_CR1_FIFOEN */ + return HAL_OK; +} + +/** + * @brief Start Receive operation in DMA mode. + * @note This function could be called by all HAL UART API providing reception in DMA mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + if (huart->hdmarx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->RxState to ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + + /* Enable the UART Parity Error Interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart) +{ +#if defined(USART_CR1_FIFOEN) + /* Disable TXEIE, TCIE, TXFT interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_TXFTIE)); +#else + /* Disable TXEIE and TCIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE | USART_CR1_TCIE)); +#endif /* USART_CR1_FIFOEN */ + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); +#endif /* USART_CR1_FIFOEN */ + + /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Reset RxIsr function pointer */ + huart->RxISR = NULL; +} + + +/** + * @brief DMA UART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx Half complete callback*/ + huart->TxHalfCpltCallback(huart); +#else + /*Call legacy weak Tx Half complete callback*/ + HAL_UART_TxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Half Transfer */ + huart->RxEventType = HAL_UART_RXEVENT_HT; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize / 2U); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize / 2U); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Half Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + huart->RxHalfCpltCallback(huart); +#else + /*Call legacy weak Rx Half complete callback*/ + HAL_UART_RxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + huart->TxXferCount = 0U; + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + huart->RxXferCount = 0U; + UART_EndRxTransfer(huart); + } + + huart->ErrorCode |= HAL_UART_ERROR_DMA; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + huart->RxXferCount = 0U; + huart->TxXferCount = 0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmarx != NULL) + { + if (huart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + +#if defined(USART_CR1_FIFOEN) + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } +#endif /* USART_CR1_FIFOEN */ + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmatx != NULL) + { + if (huart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->TxXferCount = 0U; + +#if defined(USART_CR1_FIFOEN) + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } +#endif /* USART_CR1_FIFOEN */ + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) +{ + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); +#endif /* USART_CR1_FIFOEN */ + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE); +#endif /* USART_CR1_FIFOEN */ + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + } +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief TX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param huart pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable the UART Transmit Complete Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Cleat TxISR function pointer */ + huart->TxISR = NULL; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length . + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); +#endif /* USART_CR1_FIFOEN */ + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ +#if defined(USART_CR1_FIFOEN) + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); +#else + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE)); +#endif /* USART_CR1_FIFOEN */ + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief RX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + break; + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_8BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + break; + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_16BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c new file mode 100644 index 0000000..9d8a60a --- /dev/null +++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_uart_ex.c @@ -0,0 +1,1098 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_uart_ex.c + * @author MCD Application Team + * @brief Extended UART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### UART peripheral extended features ##### + ============================================================================== + + (#) Declare a UART_HandleTypeDef handle structure. + + (#) For the UART RS485 Driver Enable mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When UART operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup UARTEx UARTEx + * @brief UART Extended HAL module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#if defined(USART_CR1_FIFOEN) +/** @defgroup UARTEX_Private_Constants UARTEx Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 8U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 8U +/** + * @} + */ +#endif /* USART_CR1_FIFOEN */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UARTEx_Private_Functions UARTEx Private Functions + * @{ + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +#if defined(USART_CR1_FIFOEN) +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart); +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions + * @{ + */ + +/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Extended Initialization and Configuration Functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration + procedures (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the RS485 Driver enable feature according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param Polarity Select the driver enable polarity. + * This parameter can be one of the following values: + * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high + * @arg @ref UART_DE_POLARITY_LOW DE signal is active low + * @param AssertionTime Driver Enable assertion time: + * 5-bit value defining the time between the activation of the DE (Driver Enable) + * signal and the beginning of the start bit. It is expressed in sample time + * units (1/8 or 1/16 bit time, depending on the oversampling rate) + * @param DeassertionTime Driver Enable deassertion time: + * 5-bit value defining the time between the end of the last stop bit, in a + * transmitted message, and the de-activation of the DE (Driver Enable) signal. + * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the + * oversampling rate). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime) +{ + uint32_t temp; + + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + /* Check the Driver Enable UART instance */ + assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance)); + + /* Check the Driver Enable polarity */ + assert_param(IS_UART_DE_POLARITY(Polarity)); + + /* Check the Driver Enable assertion time */ + assert_param(IS_UART_ASSERTIONTIME(AssertionTime)); + + /* Check the Driver Enable deassertion time */ + assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DEM); + + /* Set the Driver Enable polarity */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity); + + /* Set the Driver Enable assertion and deassertion times */ + temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS); + temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS); + MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions + * @brief Extended functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of Wakeup and FIFO mode related callback functions. + + (#) Wakeup from Stop mode Callback: + (+) HAL_UARTEx_WakeupCallback() + + (#) TX/RX Fifos Callbacks: + (+) HAL_UARTEx_RxFifoFullCallback() + (+) HAL_UARTEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief UART wakeup from Stop mode callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_WakeupCallback can be implemented in the user file. + */ +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief UART RX Fifo full callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief UART TX Fifo empty callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} +#endif /* USART_CR1_FIFOEN */ + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_UARTEx_EnableClockStopMode() API enables the UART clock (HSI or LSE only) during stop mode + (+) HAL_UARTEx_DisableClockStopMode() API disables the above functionality + (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address + detection length to more than 4 bits for multiprocessor address mark wake up. + (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode + trigger: address match, Start Bit detection or RXNE bit status. + (+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode + (+) HAL_UARTEx_DisableStopMode() API disables the above functionality + (+) HAL_UARTEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_UARTEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + + [..] This subsection also provides a set of additional functions providing enhanced reception + services to user. (For example, these functions allow application to handle use cases + where number of data to be received is unknown). + + (#) Compared to standard reception services which only consider number of received + data elements as reception completion criteria, these functions also consider additional events + as triggers for updating reception status to caller : + (+) Detection of inactivity period (RX line has not been active for a given period). + (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) + for 1 frame time, after last received byte. + (++) RX inactivity detected by RTO, i.e. line has been in idle state + for a programmable time, after last received byte. + (+) Detection that a specific character has been received. + + (#) There are two mode of transfer: + (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, + or till IDLE event occurs. Reception is handled only during function execution. + When function exits, no data reception could occur. HAL status and number of actually received data elements, + are returned by function after finishing transfer. + (+) Non-Blocking mode: The reception is performed using Interrupts or DMA. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. + The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. + + (#) Blocking mode API: + (+) HAL_UARTEx_ReceiveToIdle() + + (#) Non-Blocking mode API with Interrupt: + (+) HAL_UARTEx_ReceiveToIdle_IT() + + (#) Non-Blocking mode API with DMA: + (+) HAL_UARTEx_ReceiveToIdle_DMA() + +@endverbatim + * @{ + */ + +#if defined(USART_CR3_UCESM) +/** + * @brief Keep UART Clock enabled when in Stop Mode. + * @note When the USART clock source is configured to be LSE or HSI, it is possible to keep enabled + * this clock during STOP mode by setting the UCESM bit in USART_CR3 control register. + * @note When LPUART is used to wakeup from stop with LSE is selected as LPUART clock source, + * and desired baud rate is 9600 baud, the bit UCESM bit in LPUART_CR3 control register must be set. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableClockStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Set UCESM bit */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_UCESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable UART Clock when in Stop Mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableClockStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Clear UCESM bit */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_UCESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +#endif /* USART_CR3_UCESM */ +/** + * @brief By default in multiprocessor mode, when the wake up method is set + * to address mark, the UART handles only 4-bit long addresses detection; + * this API allows to enable longer addresses detection (6-, 7- or 8-bit + * long). + * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode, + * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode. + * @param huart UART handle. + * @param AddressLength This parameter can be one of the following values: + * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address + * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the address length parameter */ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength)); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Set Wakeup from Stop mode interrupt flag selection. + * @note It is the application responsibility to enable the interrupt used as + * usart_wkup interrupt source before entering low-power mode. + * @param huart UART handle. + * @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUP_ON_ADDRESS + * @arg @ref UART_WAKEUP_ON_STARTBIT + * @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* check the wake-up from stop mode UART instance */ + assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance)); + /* check the wake-up selection parameter */ + assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the wake-up selection scheme */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent); + + if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS) + { + UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection); + } + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + status = HAL_TIMEOUT; + } + else + { + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Enable UART Stop Mode. + * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Set UESM bit */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable UART Stop Mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Clear UESM bit */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Enable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_ENABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Disable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_DISABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param huart UART handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_TXFIFO_THRESHOLD_1_8 + * @arg @ref UART_TXFIFO_THRESHOLD_1_4 + * @arg @ref UART_TXFIFO_THRESHOLD_1_2 + * @arg @ref UART_TXFIFO_THRESHOLD_3_4 + * @arg @ref UART_TXFIFO_THRESHOLD_7_8 + * @arg @ref UART_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update TX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param huart UART handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_RXFIFO_THRESHOLD_1_8 + * @arg @ref UART_RXFIFO_THRESHOLD_1_4 + * @arg @ref UART_RXFIFO_THRESHOLD_1_2 + * @arg @ref UART_RXFIFO_THRESHOLD_3_4 + * @arg @ref UART_RXFIFO_THRESHOLD_7_8 + * @arg @ref UART_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update RX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +#endif /* USART_CR1_FIFOEN */ +/** + * @brief Receive an amount of data in blocking mode till either the expected number of data + * is received or an IDLE event occurs. + * @note HAL_OK is returned if reception is completed (expected number of data has been received) + * or if reception is stopped after IDLE event (less than the expected number of data has been received) + * In this case, RxLen output parameter indicates number of data available in reception buffer. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @param RxLen Number of data elements finally received + * (could be lower than Size, in case reception ends on IDLE event) + * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* Initialize output number of received elements */ + *RxLen = 0U; + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + /* Check if IDLE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) + { + /* Clear IDLE flag in ISR */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* If Set, but no data ever received, clear flag without exiting loop */ + /* If Set, and data has already been received, this means Idle Event is valid : End reception */ + if (*RxLen > 0U) + { + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + } + + /* Check if RXNE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) + { + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + /* Increment number of received elements */ + *RxLen += 1U; + huart->RxXferCount--; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Set number of received elements in output parameter : RxLen */ + *RxLen = huart->RxXferSize - huart->RxXferCount; + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode till either the expected number of data + * is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating + * number of received data elements. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + (void)UART_Start_Receive_IT(huart, pData, Size); + + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode till either the expected number + * of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to DMA services, transferring automatically received data elements in user reception buffer and + * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider + * reception phase as ended. In all cases, callback execution will indicate number of received data elements. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + status = UART_Start_Receive_DMA(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Provide Rx Event type that has lead to RxEvent callback execution. + * @note When HAL_UARTEx_ReceiveToIdle_IT() or HAL_UARTEx_ReceiveToIdle_DMA() API are called, progress + * of reception process is provided to application through calls of Rx Event callback (either default one + * HAL_UARTEx_RxEventCallback() or user registered one). As several types of events could occur (IDLE event, + * Half Transfer, or Transfer Complete), this function allows to retrieve the Rx Event type that has lead + * to Rx Event callback execution. + * @note This function is expected to be called within the user implementation of Rx Event Callback, + * in order to provide the accurate value : + * In Interrupt Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one) + * In DMA Mode : + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received) + * - HAL_UART_RXEVENT_HT : when half of expected nb of data has been received + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed (nb of + * received data is lower than expected one). + * In DMA mode, RxEvent callback could be called several times; + * When DMA is configured in Normal Mode, HT event does not stop Reception process; + * When DMA is configured in Circular Mode, HT, TC or IDLE events don't stop Reception process; + * @param huart UART handle. + * @retval Rx Event Type (return vale will be a value of @ref UART_RxEvent_Type_Values) + */ +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart) +{ + /* Return Rx Event type value, as stored in UART handle */ + return (huart->RxEventType); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UARTEx_Private_Functions + * @{ + */ + +/** + * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection. + * @param huart UART handle. + * @param WakeUpSelection UART wake up from stop mode parameters. + * @retval None + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength)); + + /* Set the USART address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength); + + /* Set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS)); +} + +#if defined(USART_CR1_FIFOEN) +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the UART configuration registers. + * @param huart UART handle. + * @retval None + */ +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (huart->FifoMode == UART_FIFOMODE_DISABLE) + { + huart->NbTxDataToProcess = 1U; + huart->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); + tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); + huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / + (uint16_t)denominator[tx_fifo_threshold]; + huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / + (uint16_t)denominator[rx_fifo_threshold]; + } +} +#endif /* USART_CR1_FIFOEN */ +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/LICENSE b/LICENSE new file mode 100644 index 0000000..9dc500a --- /dev/null +++ b/LICENSE @@ -0,0 +1,21 @@ +MIT License + +Copyright (c) 2025 Lorentzo Donné + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. diff --git a/STM32L452RETXP_FLASH.ld b/STM32L452RETXP_FLASH.ld new file mode 100644 index 0000000..50434f8 --- /dev/null +++ b/STM32L452RETXP_FLASH.ld @@ -0,0 +1,190 @@ +/* +****************************************************************************** +** +** @file : LinkerScript.ld +** +** @author : Auto-generated by STM32CubeIDE +** +** Abstract : Linker script for NUCLEO-L452RE-P Board embedding STM32L452RETxP Device from stm32l4 series +** 512KBytes FLASH +** 128KBytes RAM +** 32KBytes RAM2 +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +****************************************************************************** +** @attention +** +** Copyright (c) 2025 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +****************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x400; /* required amount of heap */ +_Min_Stack_Size = 0x800; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K + RAM2 (xrw) : ORIGIN = 0x10000000, LENGTH = 32K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K +} + +/* Sections */ +SECTIONS +{ + + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/STM32L452RETXP_RAM.ld b/STM32L452RETXP_RAM.ld new file mode 100644 index 0000000..4116e86 --- /dev/null +++ b/STM32L452RETXP_RAM.ld @@ -0,0 +1,190 @@ +/* +****************************************************************************** +** +** @file : LinkerScript.ld (debug in RAM dedicated) +** +** @author : Auto-generated by STM32CubeIDE +** +** Abstract : Linker script for NUCLEO-L452RE-P Board embedding STM32L452RETxP Device from stm32l4 series +** 512KBytes FLASH +** 128KBytes RAM +** 32KBytes RAM2 +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +****************************************************************************** +** @attention +** +** Copyright (c) 2025 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +****************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K + RAM2 (xrw) : ORIGIN = 0x10000000, LENGTH = 32K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K +} + +/* Sections */ +SECTIONS +{ + + /* The startup code into "RAM" Ram type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >RAM + + /* The program code and other data into "RAM" Ram type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >RAM + + /* Constant data into "RAM" Ram type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >RAM + + .ARM.extab (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >RAM + + .ARM (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >RAM + + .preinit_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >RAM + + .init_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >RAM + + .fini_array (READONLY) : /* The "READONLY" keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >RAM + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/moto-perf.ioc b/moto-perf.ioc new file mode 100644 index 0000000..27429e1 --- /dev/null +++ b/moto-perf.ioc @@ -0,0 +1,226 @@ +#MicroXplorer Configuration settings - do not modify +CAD.formats= +CAD.pinconfig= +CAD.provider= +File.Version=6 +I2C1.IPParameters=Timing +I2C1.Timing=0x10D19CE4 +KeepUserPlacement=false +Mcu.CPN=STM32L452RET6P +Mcu.Family=STM32L4 +Mcu.IP0=I2C1 +Mcu.IP1=NVIC +Mcu.IP2=RCC +Mcu.IP3=SYS +Mcu.IP4=USART2 +Mcu.IPNb=5 +Mcu.Name=STM32L452RETxP +Mcu.Package=LQFP64 +Mcu.Pin0=PC13 +Mcu.Pin1=PC14-OSC32_IN (PC14) +Mcu.Pin10=PA7 +Mcu.Pin11=PB13 +Mcu.Pin12=PA13 (JTMS/SWDIO) +Mcu.Pin13=PA14 (JTCK/SWCLK) +Mcu.Pin14=PB3 (JTDO/TRACESWO) +Mcu.Pin15=PB8 +Mcu.Pin16=PB9 +Mcu.Pin17=VP_SYS_VS_Systick +Mcu.Pin2=PC15-OSC32_OUT (PC15) +Mcu.Pin3=PH0-OSC_IN (PH0) +Mcu.Pin4=PH1-OSC_OUT (PH1) +Mcu.Pin5=PA2 +Mcu.Pin6=PA3 +Mcu.Pin7=PA4 +Mcu.Pin8=PA5 +Mcu.Pin9=PA6 +Mcu.PinsNb=18 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32L452RETxP +MxCube.Version=6.15.0 +MxDb.Version=DB.6.0.150 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:false +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false +PA13\ (JTMS/SWDIO).GPIOParameters=GPIO_Label +PA13\ (JTMS/SWDIO).GPIO_Label=TMS +PA13\ (JTMS/SWDIO).Locked=true +PA13\ (JTMS/SWDIO).Mode=Serial_Wire +PA13\ (JTMS/SWDIO).Signal=SYS_JTMS-SWDIO +PA14\ (JTCK/SWCLK).GPIOParameters=GPIO_Label +PA14\ (JTCK/SWCLK).GPIO_Label=TCK +PA14\ (JTCK/SWCLK).Locked=true +PA14\ (JTCK/SWCLK).Mode=Serial_Wire +PA14\ (JTCK/SWCLK).Signal=SYS_JTCK-SWCLK +PA2.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode +PA2.GPIO_Label=USART_TX +PA2.GPIO_Mode=GPIO_MODE_AF_PP +PA2.GPIO_PuPd=GPIO_NOPULL +PA2.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH +PA2.Locked=true +PA2.Mode=Asynchronous +PA2.Signal=USART2_TX +PA3.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_Mode +PA3.GPIO_Label=USART_RX +PA3.GPIO_Mode=GPIO_MODE_AF_PP +PA3.GPIO_PuPd=GPIO_NOPULL +PA3.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH +PA3.Locked=true +PA3.Mode=Asynchronous +PA3.Signal=USART2_RX +PA4.GPIOParameters=GPIO_Label +PA4.GPIO_Label=SMPS_EN [ADP5301ACBZ_VEN] +PA4.Locked=true +PA4.Signal=GPIO_Output +PA5.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultOutputPP +PA5.GPIO_Label=SMPS_V1 +PA5.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_PP +PA5.GPIO_PuPd=GPIO_NOPULL +PA5.GPIO_Speed=GPIO_SPEED_FREQ_LOW +PA5.Locked=true +PA5.Signal=GPIO_Output +PA6.GPIOParameters=GPIO_PuPd,GPIO_Label +PA6.GPIO_Label=SMPS_PG [ADP5301ACBZ_OUTOK] +PA6.GPIO_PuPd=GPIO_PULLUP +PA6.Locked=true +PA6.Signal=GPIO_Input +PA7.GPIOParameters=GPIO_Label +PA7.GPIO_Label=SMPS_SW [TS3A44159PWR_IN1_2] +PA7.Locked=true +PA7.Signal=GPIO_Output +PB13.GPIOParameters=GPIO_Label +PB13.GPIO_Label=LD4 [green Led] +PB13.Locked=true +PB13.Signal=GPIO_Output +PB3\ (JTDO/TRACESWO).GPIOParameters=GPIO_Label +PB3\ (JTDO/TRACESWO).GPIO_Label=SWO +PB3\ (JTDO/TRACESWO).Locked=true +PB3\ (JTDO/TRACESWO).Signal=SYS_JTDO-SWO +PB8.Locked=true +PB8.Mode=I2C +PB8.Signal=I2C1_SCL +PB9.Locked=true +PB9.Mode=I2C +PB9.Signal=I2C1_SDA +PC13.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI +PC13.GPIO_Label=B1 [Blue PushButton] +PC13.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_FALLING +PC13.GPIO_PuPd=GPIO_NOPULL +PC13.Locked=true +PC13.Signal=GPXTI13 +PC14-OSC32_IN\ (PC14).Locked=true +PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator +PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN +PC15-OSC32_OUT\ (PC15).Locked=true +PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator +PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT +PH0-OSC_IN\ (PH0).GPIOParameters=GPIO_Label +PH0-OSC_IN\ (PH0).GPIO_Label=MCO +PH0-OSC_IN\ (PH0).Locked=true +PH0-OSC_IN\ (PH0).Mode=HSE-External-Clock-Source +PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN +PH1-OSC_OUT\ (PH1).Locked=true +PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerLinker=GCC +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32L452RETxP +ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.18.1 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x400 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=1 +ProjectManager.MainLocation=Core/Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain=STM32CubeIDE +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=Scanner I2C.ioc +ProjectManager.ProjectName=Scanner I2C +ProjectManager.ProjectStructure= +ProjectManager.RegisterCallBack= +ProjectManager.StackSize=0x800 +ProjectManager.TargetToolchain=STM32CubeIDE +ProjectManager.ToolChainLocation= +ProjectManager.UAScriptAfterPath= +ProjectManager.UAScriptBeforePath= +ProjectManager.UnderRoot=true +ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_I2C1_Init-I2C1-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true +RCC.ADCFreq_Value=64000000 +RCC.AHBFreq_Value=80000000 +RCC.APB1Freq_Value=80000000 +RCC.APB1TimFreq_Value=80000000 +RCC.APB2Freq_Value=80000000 +RCC.APB2TimFreq_Value=80000000 +RCC.CortexFreq_Value=80000000 +RCC.DFSDMFreq_Value=80000000 +RCC.FCLKCortexFreq_Value=80000000 +RCC.FamilyName=M +RCC.HCLKFreq_Value=80000000 +RCC.HSE_VALUE=8000000 +RCC.HSI48_VALUE=48000000 +RCC.HSI_VALUE=16000000 +RCC.I2C1Freq_Value=80000000 +RCC.I2C2Freq_Value=80000000 +RCC.I2C3Freq_Value=80000000 +RCC.I2C4Freq_Value=80000000 +RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSourceVirtual,PREFETCH_ENABLE,PWRFreq_Value,RNGFreq_Value,SAI1Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value +RCC.LPTIM1Freq_Value=80000000 +RCC.LPTIM2Freq_Value=80000000 +RCC.LPUART1Freq_Value=80000000 +RCC.LSCOPinFreq_Value=32000 +RCC.LSI_VALUE=32000 +RCC.MCO1PinFreq_Value=80000000 +RCC.MSI_VALUE=4000000 +RCC.PLLN=10 +RCC.PLLPoutputFreq_Value=22857142.85714286 +RCC.PLLQoutputFreq_Value=80000000 +RCC.PLLRCLKFreq_Value=80000000 +RCC.PLLSAI1PoutputFreq_Value=18285714.285714287 +RCC.PLLSAI1QoutputFreq_Value=64000000 +RCC.PLLSAI1RoutputFreq_Value=64000000 +RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSI +RCC.PREFETCH_ENABLE=1 +RCC.PWRFreq_Value=80000000 +RCC.RNGFreq_Value=64000000 +RCC.SAI1Freq_Value=18285714.285714287 +RCC.SDMMCFreq_Value=64000000 +RCC.SWPMI1Freq_Value=80000000 +RCC.SYSCLKFreq_VALUE=80000000 +RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK +RCC.UART4Freq_Value=80000000 +RCC.UART5Freq_Value=80000000 +RCC.USART1Freq_Value=80000000 +RCC.USART2Freq_Value=80000000 +RCC.USART3Freq_Value=80000000 +RCC.USBFreq_Value=64000000 +RCC.VCOInputFreq_Value=16000000 +RCC.VCOOutputFreq_Value=160000000 +RCC.VCOSAI1OutputFreq_Value=128000000 +RCC.VCOSAI2OutputFreq_Value=128000000 +SH.GPXTI13.0=GPIO_EXTI13 +SH.GPXTI13.ConfNb=1 +USART2.IPParameters=VirtualMode-Asynchronous +USART2.VirtualMode-Asynchronous=VM_ASYNC +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=NUCLEO-L452RE-P +boardIOC=true +isbadioc=false diff --git a/moto-perf.launch b/moto-perf.launch new file mode 100644 index 0000000..2efcdfe --- /dev/null +++ b/moto-perf.launch @@ -0,0 +1,85 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +